327 lines
14 KiB
C
327 lines
14 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32g4xx_hal_gpio.h
|
|
* @author MCD Application Team
|
|
* @brief Header file of GPIO HAL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2019 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef STM32G4xx_HAL_GPIO_H
|
|
#define STM32G4xx_HAL_GPIO_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32g4xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32G4xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup GPIO GPIO
|
|
* @brief GPIO HAL module driver
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
|
|
/** @defgroup GPIO_Exported_Types GPIO Exported Types
|
|
* @{
|
|
*/
|
|
/**
|
|
* @brief GPIO Init structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
|
|
This parameter can be any value of @ref GPIO_pins */
|
|
|
|
uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
|
|
This parameter can be a value of @ref GPIO_mode */
|
|
|
|
uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
|
|
This parameter can be a value of @ref GPIO_pull */
|
|
|
|
uint32_t Speed; /*!< Specifies the speed for the selected pins.
|
|
This parameter can be a value of @ref GPIO_speed */
|
|
|
|
uint32_t Alternate; /*!< Peripheral to be connected to the selected pins
|
|
This parameter can be a value of @ref GPIOEx_Alternate_function_selection */
|
|
} GPIO_InitTypeDef;
|
|
|
|
/**
|
|
* @brief GPIO Bit SET and Bit RESET enumeration
|
|
*/
|
|
typedef enum
|
|
{
|
|
GPIO_PIN_RESET = 0U,
|
|
GPIO_PIN_SET
|
|
} GPIO_PinState;
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
|
|
* @{
|
|
*/
|
|
/** @defgroup GPIO_pins GPIO pins
|
|
* @{
|
|
*/
|
|
#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
|
|
#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
|
|
#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
|
|
#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
|
|
#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
|
|
#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
|
|
#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
|
|
#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
|
|
#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
|
|
#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
|
|
#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
|
|
#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
|
|
#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
|
|
#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
|
|
#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
|
|
#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
|
|
#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */
|
|
|
|
#define GPIO_PIN_MASK (0x0000FFFFU) /* PIN mask for assert test */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup GPIO_mode GPIO mode
|
|
* @brief GPIO Configuration Mode
|
|
* Elements values convention: 0x00WX00YZ
|
|
* - W : EXTI trigger detection on 3 bits
|
|
* - X : EXTI mode (IT or Event) on 2 bits
|
|
* - Y : Output type (Push Pull or Open Drain) on 1 bit
|
|
* - Z : GPIO mode (Input, Output, Alternate or Analog) on 2 bits
|
|
* @{
|
|
*/
|
|
#define GPIO_MODE_INPUT MODE_INPUT /*!< Input Floating Mode */
|
|
#define GPIO_MODE_OUTPUT_PP (MODE_OUTPUT | OUTPUT_PP) /*!< Output Push Pull Mode */
|
|
#define GPIO_MODE_OUTPUT_OD (MODE_OUTPUT | OUTPUT_OD) /*!< Output Open Drain Mode */
|
|
#define GPIO_MODE_AF_PP (MODE_AF | OUTPUT_PP) /*!< Alternate Function Push Pull Mode */
|
|
#define GPIO_MODE_AF_OD (MODE_AF | OUTPUT_OD) /*!< Alternate Function Open Drain Mode */
|
|
|
|
#define GPIO_MODE_ANALOG MODE_ANALOG /*!< Analog Mode */
|
|
|
|
#define GPIO_MODE_IT_RISING (MODE_INPUT | EXTI_IT | TRIGGER_RISING) /*!< External Interrupt Mode with Rising edge trigger detection */
|
|
#define GPIO_MODE_IT_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_FALLING) /*!< External Interrupt Mode with Falling edge trigger detection */
|
|
#define GPIO_MODE_IT_RISING_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
|
|
|
#define GPIO_MODE_EVT_RISING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING) /*!< External Event Mode with Rising edge trigger detection */
|
|
#define GPIO_MODE_EVT_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING) /*!< External Event Mode with Falling edge trigger detection */
|
|
#define GPIO_MODE_EVT_RISING_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Event Mode with Rising/Falling edge trigger detection */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup GPIO_speed GPIO speed
|
|
* @brief GPIO Output Maximum frequency
|
|
* @{
|
|
*/
|
|
#define GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< range up to 5 MHz, please refer to the product datasheet */
|
|
#define GPIO_SPEED_FREQ_MEDIUM (0x00000001U) /*!< range 5 MHz to 25 MHz, please refer to the product datasheet */
|
|
#define GPIO_SPEED_FREQ_HIGH (0x00000002U) /*!< range 25 MHz to 50 MHz, please refer to the product datasheet */
|
|
#define GPIO_SPEED_FREQ_VERY_HIGH (0x00000003U) /*!< range 50 MHz to 120 MHz, please refer to the product datasheet */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup GPIO_pull GPIO pull
|
|
* @brief GPIO Pull-Up or Pull-Down Activation
|
|
* @{
|
|
*/
|
|
#define GPIO_NOPULL (0x00000000U) /*!< No Pull-up or Pull-down activation */
|
|
#define GPIO_PULLUP (0x00000001U) /*!< Pull-up activation */
|
|
#define GPIO_PULLDOWN (0x00000002U) /*!< Pull-down activation */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Check whether the specified EXTI line flag is set or not.
|
|
* @param __EXTI_LINE__ specifies the EXTI line flag to check.
|
|
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
|
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
|
*/
|
|
#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR1 & (__EXTI_LINE__))
|
|
|
|
/**
|
|
* @brief Clear the EXTI's line pending flags.
|
|
* @param __EXTI_LINE__ specifies the EXTI lines flags to clear.
|
|
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
|
* @retval None
|
|
*/
|
|
#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR1 = (__EXTI_LINE__))
|
|
|
|
/**
|
|
* @brief Check whether the specified EXTI line is asserted or not.
|
|
* @param __EXTI_LINE__ specifies the EXTI line to check.
|
|
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
|
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
|
*/
|
|
#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR1 & (__EXTI_LINE__))
|
|
|
|
/**
|
|
* @brief Clear the EXTI's line pending bits.
|
|
* @param __EXTI_LINE__ specifies the EXTI lines to clear.
|
|
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
|
* @retval None
|
|
*/
|
|
#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR1 = (__EXTI_LINE__))
|
|
|
|
/**
|
|
* @brief Generate a Software interrupt on selected EXTI line.
|
|
* @param __EXTI_LINE__ specifies the EXTI line to check.
|
|
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
|
* @retval None
|
|
*/
|
|
#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER1 |= (__EXTI_LINE__))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private macros ------------------------------------------------------------*/
|
|
/** @defgroup GPIO_Private_Constants GPIO Private Constants
|
|
* @{
|
|
*/
|
|
#define GPIO_MODE_Pos 0U
|
|
#define GPIO_MODE (0x3UL << GPIO_MODE_Pos)
|
|
#define MODE_INPUT (0x0UL << GPIO_MODE_Pos)
|
|
#define MODE_OUTPUT (0x1UL << GPIO_MODE_Pos)
|
|
#define MODE_AF (0x2UL << GPIO_MODE_Pos)
|
|
#define MODE_ANALOG (0x3UL << GPIO_MODE_Pos)
|
|
#define OUTPUT_TYPE_Pos 4U
|
|
#define OUTPUT_TYPE (0x1UL << OUTPUT_TYPE_Pos)
|
|
#define OUTPUT_PP (0x0UL << OUTPUT_TYPE_Pos)
|
|
#define OUTPUT_OD (0x1UL << OUTPUT_TYPE_Pos)
|
|
#define EXTI_MODE_Pos 16U
|
|
#define EXTI_MODE (0x3UL << EXTI_MODE_Pos)
|
|
#define EXTI_IT (0x1UL << EXTI_MODE_Pos)
|
|
#define EXTI_EVT (0x2UL << EXTI_MODE_Pos)
|
|
#define TRIGGER_MODE_Pos 20U
|
|
#define TRIGGER_MODE (0x7UL << TRIGGER_MODE_Pos)
|
|
#define TRIGGER_RISING (0x1UL << TRIGGER_MODE_Pos)
|
|
#define TRIGGER_FALLING (0x2UL << TRIGGER_MODE_Pos)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup GPIO_Private_Macros GPIO Private Macros
|
|
* @{
|
|
*/
|
|
#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
|
|
|
|
#define IS_GPIO_PIN(__PIN__) ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\
|
|
(((uint32_t)(__PIN__) & ~GPIO_PIN_MASK) == 0x00U))
|
|
|
|
#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\
|
|
((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\
|
|
((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\
|
|
((__MODE__) == GPIO_MODE_AF_PP) ||\
|
|
((__MODE__) == GPIO_MODE_AF_OD) ||\
|
|
((__MODE__) == GPIO_MODE_IT_RISING) ||\
|
|
((__MODE__) == GPIO_MODE_IT_FALLING) ||\
|
|
((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\
|
|
((__MODE__) == GPIO_MODE_EVT_RISING) ||\
|
|
((__MODE__) == GPIO_MODE_EVT_FALLING) ||\
|
|
((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\
|
|
((__MODE__) == GPIO_MODE_ANALOG))
|
|
|
|
#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW) ||\
|
|
((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\
|
|
((__SPEED__) == GPIO_SPEED_FREQ_HIGH) ||\
|
|
((__SPEED__) == GPIO_SPEED_FREQ_VERY_HIGH))
|
|
|
|
#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\
|
|
((__PULL__) == GPIO_PULLUP) || \
|
|
((__PULL__) == GPIO_PULLDOWN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Include GPIO HAL Extended module */
|
|
#include "stm32g4xx_hal_gpio_ex.h"
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
|
|
* @brief GPIO Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions
|
|
* @brief Initialization and Configuration functions
|
|
* @{
|
|
*/
|
|
|
|
/* Initialization and de-initialization functions *****************************/
|
|
void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
|
|
void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions
|
|
* @brief IO operation functions
|
|
* @{
|
|
*/
|
|
|
|
/* IO operation functions *****************************************************/
|
|
GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
|
|
void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
|
|
void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
|
|
HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
|
|
void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
|
|
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* STM32G4xx_HAL_GPIO_H */
|
|
|