Sliders_McGee/Drivers/STM32G4xx_HAL_Driver/Inc/stm32g4xx_ll_dma.h
Chris Trimble 09ca8ceb1f Initial commit.
Base level functionality complete.
Untested on hardware.
2024-06-06 22:01:17 -05:00

2579 lines
102 KiB
C

/**
******************************************************************************
* @file stm32g4xx_ll_dma.h
* @author MCD Application Team
* @brief Header file of DMA LL module.
******************************************************************************
* @attention
*
* Copyright (c) 2019 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32G4xx_LL_DMA_H
#define __STM32G4xx_LL_DMA_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g4xx.h"
#include "stm32g4xx_ll_dmamux.h"
/** @addtogroup STM32G4xx_LL_Driver
* @{
*/
#if defined (DMA1) || defined (DMA2)
/** @defgroup DMA_LL DMA
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/** @defgroup DMA_LL_Private_Variables DMA Private Variables
* @{
*/
/* Array used to get the DMA channel register offset versus channel index LL_DMA_CHANNEL_x */
static const uint8_t CHANNEL_OFFSET_TAB[] =
{
(uint8_t)(DMA1_Channel1_BASE - DMA1_BASE),
(uint8_t)(DMA1_Channel2_BASE - DMA1_BASE),
(uint8_t)(DMA1_Channel3_BASE - DMA1_BASE),
(uint8_t)(DMA1_Channel4_BASE - DMA1_BASE),
(uint8_t)(DMA1_Channel5_BASE - DMA1_BASE),
(uint8_t)(DMA1_Channel6_BASE - DMA1_BASE)
#if defined (DMA1_Channel7)
,
(uint8_t)(DMA1_Channel7_BASE - DMA1_BASE)
#endif /* DMA1_Channel7 */
#if defined (DMA1_Channel8)
,
(uint8_t)(DMA1_Channel8_BASE - DMA1_BASE)
#endif /* DMA1_Channel8 */
};
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup DMA_LL_Private_Constants DMA Private Constants
* @{
*/
/* Define used to get CSELR register offset */
#define DMA_CSELR_OFFSET (uint32_t)(DMA1_CSELR_BASE - DMA1_BASE)
/* Defines used for the bit position in the register and perform offsets */
#define DMA_POSITION_CSELR_CXS POSITION_VAL(DMA_CSELR_C1S << ((Channel-1U)*4U))
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup DMA_LL_Private_Macros DMA Private Macros
* @{
*/
/**
* @}
*/
#endif /*USE_FULL_LL_DRIVER*/
/* Exported types ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure
* @{
*/
typedef struct
{
uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer
or as Source base address in case of memory to memory transfer direction.
This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */
uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer
or as Destination base address in case of memory to memory transfer direction.
This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */
uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
from memory to memory or from peripheral to memory.
This parameter can be a value of @ref DMA_LL_EC_DIRECTION
This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */
uint32_t Mode; /*!< Specifies the normal or circular operation mode.
This parameter can be a value of @ref DMA_LL_EC_MODE
@note: The circular buffer mode cannot be used if the memory to memory
data transfer direction is configured on the selected Channel
This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */
uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction
is incremented or not.
This parameter can be a value of @ref DMA_LL_EC_PERIPH
This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */
uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction
is incremented or not.
This parameter can be a value of @ref DMA_LL_EC_MEMORY
This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */
uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word)
in case of memory to memory transfer direction.
This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN
This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */
uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word)
in case of memory to memory transfer direction.
This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN
This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */
uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit.
The data unit is equal to the source buffer configuration set in PeripheralSize
or MemorySize parameters depending in the transfer direction.
This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF
This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */
uint32_t PeriphRequest; /*!< Specifies the peripheral request.
This parameter can be a value of @ref DMAMUX_LL_EC_REQUEST
This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphRequest(). */
uint32_t Priority; /*!< Specifies the channel priority level.
This parameter can be a value of @ref DMA_LL_EC_PRIORITY
This feature can be modified afterwards using unitary function @ref LL_DMA_SetChannelPriorityLevel(). */
} LL_DMA_InitTypeDef;
/**
* @}
*/
#endif /*USE_FULL_LL_DRIVER*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants
* @{
*/
/** @defgroup DMA_LL_EC_CLEAR_FLAG Clear Flags Defines
* @brief Flags defines which can be used with LL_DMA_WriteReg function
* @{
*/
#define LL_DMA_IFCR_CGIF1 DMA_IFCR_CGIF1 /*!< Channel 1 global flag */
#define LL_DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1 /*!< Channel 1 transfer complete flag */
#define LL_DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1 /*!< Channel 1 half transfer flag */
#define LL_DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1 /*!< Channel 1 transfer error flag */
#define LL_DMA_IFCR_CGIF2 DMA_IFCR_CGIF2 /*!< Channel 2 global flag */
#define LL_DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2 /*!< Channel 2 transfer complete flag */
#define LL_DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2 /*!< Channel 2 half transfer flag */
#define LL_DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2 /*!< Channel 2 transfer error flag */
#define LL_DMA_IFCR_CGIF3 DMA_IFCR_CGIF3 /*!< Channel 3 global flag */
#define LL_DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3 /*!< Channel 3 transfer complete flag */
#define LL_DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3 /*!< Channel 3 half transfer flag */
#define LL_DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3 /*!< Channel 3 transfer error flag */
#define LL_DMA_IFCR_CGIF4 DMA_IFCR_CGIF4 /*!< Channel 4 global flag */
#define LL_DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4 /*!< Channel 4 transfer complete flag */
#define LL_DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4 /*!< Channel 4 half transfer flag */
#define LL_DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4 /*!< Channel 4 transfer error flag */
#define LL_DMA_IFCR_CGIF5 DMA_IFCR_CGIF5 /*!< Channel 5 global flag */
#define LL_DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5 /*!< Channel 5 transfer complete flag */
#define LL_DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5 /*!< Channel 5 half transfer flag */
#define LL_DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5 /*!< Channel 5 transfer error flag */
#define LL_DMA_IFCR_CGIF6 DMA_IFCR_CGIF6 /*!< Channel 6 global flag */
#define LL_DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6 /*!< Channel 6 transfer complete flag */
#define LL_DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6 /*!< Channel 6 half transfer flag */
#define LL_DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6 /*!< Channel 6 transfer error flag */
#if defined (DMA1_Channel7)
#define LL_DMA_IFCR_CGIF7 DMA_IFCR_CGIF7 /*!< Channel 7 global flag */
#define LL_DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7 /*!< Channel 7 transfer complete flag */
#define LL_DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7 /*!< Channel 7 half transfer flag */
#define LL_DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7 /*!< Channel 7 transfer error flag */
#endif /* DMA1_Channel7 */
#if defined (DMA1_Channel8)
#define LL_DMA_IFCR_CGIF8 DMA_IFCR_CGIF8 /*!< Channel 8 global flag */
#define LL_DMA_IFCR_CTCIF8 DMA_IFCR_CTCIF8 /*!< Channel 8 transfer complete flag */
#define LL_DMA_IFCR_CHTIF8 DMA_IFCR_CHTIF8 /*!< Channel 8 half transfer flag */
#define LL_DMA_IFCR_CTEIF8 DMA_IFCR_CTEIF8 /*!< Channel 8 transfer error flag */
#endif /* DMA1_Channel8 */
/**
* @}
*/
/** @defgroup DMA_LL_EC_GET_FLAG Get Flags Defines
* @brief Flags defines which can be used with LL_DMA_ReadReg function
* @{
*/
#define LL_DMA_ISR_GIF1 DMA_ISR_GIF1 /*!< Channel 1 global flag */
#define LL_DMA_ISR_TCIF1 DMA_ISR_TCIF1 /*!< Channel 1 transfer complete flag */
#define LL_DMA_ISR_HTIF1 DMA_ISR_HTIF1 /*!< Channel 1 half transfer flag */
#define LL_DMA_ISR_TEIF1 DMA_ISR_TEIF1 /*!< Channel 1 transfer error flag */
#define LL_DMA_ISR_GIF2 DMA_ISR_GIF2 /*!< Channel 2 global flag */
#define LL_DMA_ISR_TCIF2 DMA_ISR_TCIF2 /*!< Channel 2 transfer complete flag */
#define LL_DMA_ISR_HTIF2 DMA_ISR_HTIF2 /*!< Channel 2 half transfer flag */
#define LL_DMA_ISR_TEIF2 DMA_ISR_TEIF2 /*!< Channel 2 transfer error flag */
#define LL_DMA_ISR_GIF3 DMA_ISR_GIF3 /*!< Channel 3 global flag */
#define LL_DMA_ISR_TCIF3 DMA_ISR_TCIF3 /*!< Channel 3 transfer complete flag */
#define LL_DMA_ISR_HTIF3 DMA_ISR_HTIF3 /*!< Channel 3 half transfer flag */
#define LL_DMA_ISR_TEIF3 DMA_ISR_TEIF3 /*!< Channel 3 transfer error flag */
#define LL_DMA_ISR_GIF4 DMA_ISR_GIF4 /*!< Channel 4 global flag */
#define LL_DMA_ISR_TCIF4 DMA_ISR_TCIF4 /*!< Channel 4 transfer complete flag */
#define LL_DMA_ISR_HTIF4 DMA_ISR_HTIF4 /*!< Channel 4 half transfer flag */
#define LL_DMA_ISR_TEIF4 DMA_ISR_TEIF4 /*!< Channel 4 transfer error flag */
#define LL_DMA_ISR_GIF5 DMA_ISR_GIF5 /*!< Channel 5 global flag */
#define LL_DMA_ISR_TCIF5 DMA_ISR_TCIF5 /*!< Channel 5 transfer complete flag */
#define LL_DMA_ISR_HTIF5 DMA_ISR_HTIF5 /*!< Channel 5 half transfer flag */
#define LL_DMA_ISR_TEIF5 DMA_ISR_TEIF5 /*!< Channel 5 transfer error flag */
#define LL_DMA_ISR_GIF6 DMA_ISR_GIF6 /*!< Channel 6 global flag */
#define LL_DMA_ISR_TCIF6 DMA_ISR_TCIF6 /*!< Channel 6 transfer complete flag */
#define LL_DMA_ISR_HTIF6 DMA_ISR_HTIF6 /*!< Channel 6 half transfer flag */
#define LL_DMA_ISR_TEIF6 DMA_ISR_TEIF6 /*!< Channel 6 transfer error flag */
#if defined (DMA1_Channel7)
#define LL_DMA_ISR_GIF7 DMA_ISR_GIF7 /*!< Channel 7 global flag */
#define LL_DMA_ISR_TCIF7 DMA_ISR_TCIF7 /*!< Channel 7 transfer complete flag */
#define LL_DMA_ISR_HTIF7 DMA_ISR_HTIF7 /*!< Channel 7 half transfer flag */
#define LL_DMA_ISR_TEIF7 DMA_ISR_TEIF7 /*!< Channel 7 transfer error flag */
#endif /* DMA1_Channel7 */
#if defined (DMA1_Channel8)
#define LL_DMA_ISR_GIF8 DMA_ISR_GIF8 /*!< Channel 8 global flag */
#define LL_DMA_ISR_TCIF8 DMA_ISR_TCIF8 /*!< Channel 8 transfer complete flag */
#define LL_DMA_ISR_HTIF8 DMA_ISR_HTIF8 /*!< Channel 8 half transfer flag */
#define LL_DMA_ISR_TEIF8 DMA_ISR_TEIF8 /*!< Channel 8 transfer error flag */
#endif /* DMA1_Channel8 */
/**
* @}
*/
/** @defgroup DMA_LL_EC_IT IT Defines
* @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMA_WriteReg functions
* @{
*/
#define LL_DMA_CCR_TCIE DMA_CCR_TCIE /*!< Transfer complete interrupt */
#define LL_DMA_CCR_HTIE DMA_CCR_HTIE /*!< Half Transfer interrupt */
#define LL_DMA_CCR_TEIE DMA_CCR_TEIE /*!< Transfer error interrupt */
/**
* @}
*/
/** @defgroup DMA_LL_EC_CHANNEL CHANNEL
* @{
*/
#define LL_DMA_CHANNEL_1 0x00000000U /*!< DMA Channel 1 */
#define LL_DMA_CHANNEL_2 0x00000001U /*!< DMA Channel 2 */
#define LL_DMA_CHANNEL_3 0x00000002U /*!< DMA Channel 3 */
#define LL_DMA_CHANNEL_4 0x00000003U /*!< DMA Channel 4 */
#define LL_DMA_CHANNEL_5 0x00000004U /*!< DMA Channel 5 */
#define LL_DMA_CHANNEL_6 0x00000005U /*!< DMA Channel 6 */
#if defined (DMA1_Channel7)
#define LL_DMA_CHANNEL_7 0x00000006U /*!< DMA Channel 7 */
#endif /* DMA1_Channel7 */
#if defined (DMA1_Channel8)
#define LL_DMA_CHANNEL_8 0x00000007U /*!< DMA Channel 8 */
#endif /* DMA1_Channel8 */
#if defined(USE_FULL_LL_DRIVER)
#define LL_DMA_CHANNEL_ALL 0xFFFF0000U /*!< DMA Channel all (used only for function @ref LL_DMA_DeInit(). */
#endif /*USE_FULL_LL_DRIVER*/
/**
* @}
*/
/** @defgroup DMA_LL_EC_DIRECTION Transfer Direction
* @{
*/
#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */
#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_CCR_DIR /*!< Memory to peripheral direction */
#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_CCR_MEM2MEM /*!< Memory to memory direction */
/**
* @}
*/
/** @defgroup DMA_LL_EC_MODE Transfer mode
* @{
*/
#define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */
#define LL_DMA_MODE_CIRCULAR DMA_CCR_CIRC /*!< Circular Mode */
/**
* @}
*/
/** @defgroup DMA_LL_EC_PERIPH Peripheral increment mode
* @{
*/
#define LL_DMA_PERIPH_INCREMENT DMA_CCR_PINC /*!< Peripheral increment mode Enable */
#define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */
/**
* @}
*/
/** @defgroup DMA_LL_EC_MEMORY Memory increment mode
* @{
*/
#define LL_DMA_MEMORY_INCREMENT DMA_CCR_MINC /*!< Memory increment mode Enable */
#define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */
/**
* @}
*/
/** @defgroup DMA_LL_EC_PDATAALIGN Peripheral data alignment
* @{
*/
#define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */
#define LL_DMA_PDATAALIGN_HALFWORD DMA_CCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */
#define LL_DMA_PDATAALIGN_WORD DMA_CCR_PSIZE_1 /*!< Peripheral data alignment : Word */
/**
* @}
*/
/** @defgroup DMA_LL_EC_MDATAALIGN Memory data alignment
* @{
*/
#define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */
#define LL_DMA_MDATAALIGN_HALFWORD DMA_CCR_MSIZE_0 /*!< Memory data alignment : HalfWord */
#define LL_DMA_MDATAALIGN_WORD DMA_CCR_MSIZE_1 /*!< Memory data alignment : Word */
/**
* @}
*/
/** @defgroup DMA_LL_EC_PRIORITY Transfer Priority level
* @{
*/
#define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */
#define LL_DMA_PRIORITY_MEDIUM DMA_CCR_PL_0 /*!< Priority level : Medium */
#define LL_DMA_PRIORITY_HIGH DMA_CCR_PL_1 /*!< Priority level : High */
#define LL_DMA_PRIORITY_VERYHIGH DMA_CCR_PL /*!< Priority level : Very_High */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros
* @{
*/
/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros
* @{
*/
/**
* @brief Write a value in DMA register
* @param __INSTANCE__ DMA Instance
* @param __REG__ Register to be written
* @param __VALUE__ Value to be written in the register
* @retval None
*/
#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
/**
* @brief Read a value in DMA register
* @param __INSTANCE__ DMA Instance
* @param __REG__ Register to be read
* @retval Register value
*/
#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
/**
* @}
*/
/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxChannely
* @{
*/
/**
* @brief Convert DMAx_Channely into DMAx
* @param __CHANNEL_INSTANCE__ DMAx_Channely
* @retval DMAx
*/
#if defined (DMA1_Channel8)
#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) \
(((uint32_t)(__CHANNEL_INSTANCE__) > ((uint32_t)DMA1_Channel8)) ? DMA2 : DMA1)
#else
#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) \
(((uint32_t)(__CHANNEL_INSTANCE__) > ((uint32_t)DMA1_Channel6)) ? DMA2 : DMA1)
#endif /* DMA1_Channel8 */
/**
* @brief Convert DMAx_Channely into LL_DMA_CHANNEL_y
* @param __CHANNEL_INSTANCE__ DMAx_Channely
* @retval LL_DMA_CHANNEL_y
*/
#if defined (DMA1_Channel8)
#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \
(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel6)) ? LL_DMA_CHANNEL_6 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel7)) ? LL_DMA_CHANNEL_7 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel7)) ? LL_DMA_CHANNEL_7 : \
LL_DMA_CHANNEL_8)
#else
#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \
(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \
LL_DMA_CHANNEL_6)
#endif /* DMA1_Channel8 */
/**
* @brief Convert DMA Instance DMAx and LL_DMA_CHANNEL_y into DMAx_Channely
* @param __DMA_INSTANCE__ DMAx
* @param __CHANNEL__ LL_DMA_CHANNEL_y
* @retval DMAx_Channely
*/
#if defined (DMA1_Channel8)
#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \
((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA2_Channel6 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_7))) ? DMA1_Channel7 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_7))) ? DMA2_Channel7 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_8))) ? DMA1_Channel8 : \
DMA2_Channel8)
#else
#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \
((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \
DMA2_Channel6)
#endif /* DMA1_Channel8 */
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup DMA_LL_Exported_Functions DMA Exported Functions
* @{
*/
/** @defgroup DMA_LL_EF_Configuration Configuration
* @{
*/
/**
* @brief Enable DMA channel.
* @rmtoll CCR EN LL_DMA_EnableChannel
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval None
*/
__STATIC_INLINE void LL_DMA_EnableChannel(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_EN);
}
/**
* @brief Disable DMA channel.
* @rmtoll CCR EN LL_DMA_DisableChannel
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval None
*/
__STATIC_INLINE void LL_DMA_DisableChannel(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_EN);
}
/**
* @brief Check if DMA channel is enabled or disabled.
* @rmtoll CCR EN LL_DMA_IsEnabledChannel
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsEnabledChannel(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
return ((READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR,
DMA_CCR_EN) == (DMA_CCR_EN)) ? 1UL : 0UL);
}
/**
* @brief Configure all parameters link to DMA transfer.
* @rmtoll CCR DIR LL_DMA_ConfigTransfer\n
* CCR MEM2MEM LL_DMA_ConfigTransfer\n
* CCR CIRC LL_DMA_ConfigTransfer\n
* CCR PINC LL_DMA_ConfigTransfer\n
* CCR MINC LL_DMA_ConfigTransfer\n
* CCR PSIZE LL_DMA_ConfigTransfer\n
* CCR MSIZE LL_DMA_ConfigTransfer\n
* CCR PL LL_DMA_ConfigTransfer
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @param Configuration This parameter must be a combination of all the following values:
* @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
* @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR
* @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT
* @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT
* @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD
* @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD
* @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH
* @retval None
*/
__STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Configuration)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR,
DMA_CCR_DIR | DMA_CCR_MEM2MEM | DMA_CCR_CIRC | DMA_CCR_PINC | DMA_CCR_MINC | DMA_CCR_PSIZE | DMA_CCR_MSIZE | DMA_CCR_PL,
Configuration);
}
/**
* @brief Set Data transfer direction (read from peripheral or from memory).
* @rmtoll CCR DIR LL_DMA_SetDataTransferDirection\n
* CCR MEM2MEM LL_DMA_SetDataTransferDirection
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @param Direction This parameter can be one of the following values:
* @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY
* @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH
* @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
* @retval None
*/
__STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Direction)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR,
DMA_CCR_DIR | DMA_CCR_MEM2MEM, Direction);
}
/**
* @brief Get Data transfer direction (read from peripheral or from memory).
* @rmtoll CCR DIR LL_DMA_GetDataTransferDirection\n
* CCR MEM2MEM LL_DMA_GetDataTransferDirection
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval Returned value can be one of the following values:
* @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY
* @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH
* @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
*/
__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR,
DMA_CCR_DIR | DMA_CCR_MEM2MEM));
}
/**
* @brief Set DMA mode circular or normal.
* @note The circular buffer mode cannot be used if the memory-to-memory
* data transfer is configured on the selected Channel.
* @rmtoll CCR CIRC LL_DMA_SetMode
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @param Mode This parameter can be one of the following values:
* @arg @ref LL_DMA_MODE_NORMAL
* @arg @ref LL_DMA_MODE_CIRCULAR
* @retval None
*/
__STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Mode)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_CIRC,
Mode);
}
/**
* @brief Get DMA mode circular or normal.
* @rmtoll CCR CIRC LL_DMA_GetMode
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval Returned value can be one of the following values:
* @arg @ref LL_DMA_MODE_NORMAL
* @arg @ref LL_DMA_MODE_CIRCULAR
*/
__STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR,
DMA_CCR_CIRC));
}
/**
* @brief Set Peripheral increment mode.
* @rmtoll CCR PINC LL_DMA_SetPeriphIncMode
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @param PeriphOrM2MSrcIncMode This parameter can be one of the following values:
* @arg @ref LL_DMA_PERIPH_INCREMENT
* @arg @ref LL_DMA_PERIPH_NOINCREMENT
* @retval None
*/
__STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcIncMode)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_PINC,
PeriphOrM2MSrcIncMode);
}
/**
* @brief Get Peripheral increment mode.
* @rmtoll CCR PINC LL_DMA_GetPeriphIncMode
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval Returned value can be one of the following values:
* @arg @ref LL_DMA_PERIPH_INCREMENT
* @arg @ref LL_DMA_PERIPH_NOINCREMENT
*/
__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR,
DMA_CCR_PINC));
}
/**
* @brief Set Memory increment mode.
* @rmtoll CCR MINC LL_DMA_SetMemoryIncMode
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @param MemoryOrM2MDstIncMode This parameter can be one of the following values:
* @arg @ref LL_DMA_MEMORY_INCREMENT
* @arg @ref LL_DMA_MEMORY_NOINCREMENT
* @retval None
*/
__STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstIncMode)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_MINC,
MemoryOrM2MDstIncMode);
}
/**
* @brief Get Memory increment mode.
* @rmtoll CCR MINC LL_DMA_GetMemoryIncMode
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval Returned value can be one of the following values:
* @arg @ref LL_DMA_MEMORY_INCREMENT
* @arg @ref LL_DMA_MEMORY_NOINCREMENT
*/
__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR,
DMA_CCR_MINC));
}
/**
* @brief Set Peripheral size.
* @rmtoll CCR PSIZE LL_DMA_SetPeriphSize
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @param PeriphOrM2MSrcDataSize This parameter can be one of the following values:
* @arg @ref LL_DMA_PDATAALIGN_BYTE
* @arg @ref LL_DMA_PDATAALIGN_HALFWORD
* @arg @ref LL_DMA_PDATAALIGN_WORD
* @retval None
*/
__STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcDataSize)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_PSIZE,
PeriphOrM2MSrcDataSize);
}
/**
* @brief Get Peripheral size.
* @rmtoll CCR PSIZE LL_DMA_GetPeriphSize
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval Returned value can be one of the following values:
* @arg @ref LL_DMA_PDATAALIGN_BYTE
* @arg @ref LL_DMA_PDATAALIGN_HALFWORD
* @arg @ref LL_DMA_PDATAALIGN_WORD
*/
__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR,
DMA_CCR_PSIZE));
}
/**
* @brief Set Memory size.
* @rmtoll CCR MSIZE LL_DMA_SetMemorySize
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @param MemoryOrM2MDstDataSize This parameter can be one of the following values:
* @arg @ref LL_DMA_MDATAALIGN_BYTE
* @arg @ref LL_DMA_MDATAALIGN_HALFWORD
* @arg @ref LL_DMA_MDATAALIGN_WORD
* @retval None
*/
__STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstDataSize)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_MSIZE,
MemoryOrM2MDstDataSize);
}
/**
* @brief Get Memory size.
* @rmtoll CCR MSIZE LL_DMA_GetMemorySize
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval Returned value can be one of the following values:
* @arg @ref LL_DMA_MDATAALIGN_BYTE
* @arg @ref LL_DMA_MDATAALIGN_HALFWORD
* @arg @ref LL_DMA_MDATAALIGN_WORD
*/
__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR,
DMA_CCR_MSIZE));
}
/**
* @brief Set Channel priority level.
* @rmtoll CCR PL LL_DMA_SetChannelPriorityLevel
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @param Priority This parameter can be one of the following values:
* @arg @ref LL_DMA_PRIORITY_LOW
* @arg @ref LL_DMA_PRIORITY_MEDIUM
* @arg @ref LL_DMA_PRIORITY_HIGH
* @arg @ref LL_DMA_PRIORITY_VERYHIGH
* @retval None
*/
__STATIC_INLINE void LL_DMA_SetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Priority)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_PL,
Priority);
}
/**
* @brief Get Channel priority level.
* @rmtoll CCR PL LL_DMA_GetChannelPriorityLevel
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval Returned value can be one of the following values:
* @arg @ref LL_DMA_PRIORITY_LOW
* @arg @ref LL_DMA_PRIORITY_MEDIUM
* @arg @ref LL_DMA_PRIORITY_HIGH
* @arg @ref LL_DMA_PRIORITY_VERYHIGH
*/
__STATIC_INLINE uint32_t LL_DMA_GetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR,
DMA_CCR_PL));
}
/**
* @brief Set Number of data to transfer.
* @note This action has no effect if
* channel is enabled.
* @rmtoll CNDTR NDT LL_DMA_SetDataLength
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @param NbData Between Min_Data = 0 and Max_Data = 0x0000FFFF
* @retval None
*/
__STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t NbData)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CNDTR,
DMA_CNDTR_NDT, NbData);
}
/**
* @brief Get Number of data to transfer.
* @note Once the channel is enabled, the return value indicate the
* remaining bytes to be transmitted.
* @rmtoll CNDTR NDT LL_DMA_GetDataLength
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
*/
__STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CNDTR,
DMA_CNDTR_NDT));
}
/**
* @brief Configure the Source and Destination addresses.
* @note This API must not be called when the DMA channel is enabled.
* @note Each IP using DMA provides an API to get directly the register address (LL_PPP_DMA_GetRegAddr).
* @rmtoll CPAR PA LL_DMA_ConfigAddresses\n
* CMAR MA LL_DMA_ConfigAddresses
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @param SrcAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
* @param DstAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
* @param Direction This parameter can be one of the following values:
* @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY
* @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH
* @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
* @retval None
*/
__STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAddress,
uint32_t DstAddress, uint32_t Direction)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
/* Direction Memory to Periph */
if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH)
{
WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CMAR, SrcAddress);
WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CPAR, DstAddress);
}
/* Direction Periph to Memory and Memory to Memory */
else
{
WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CPAR, SrcAddress);
WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CMAR, DstAddress);
}
}
/**
* @brief Set the Memory address.
* @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
* @note This API must not be called when the DMA channel is enabled.
* @rmtoll CMAR MA LL_DMA_SetMemoryAddress
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
* @retval None
*/
__STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CMAR, MemoryAddress);
}
/**
* @brief Set the Peripheral address.
* @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
* @note This API must not be called when the DMA channel is enabled.
* @rmtoll CPAR PA LL_DMA_SetPeriphAddress
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @param PeriphAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
* @retval None
*/
__STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphAddress)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CPAR, PeriphAddress);
}
/**
* @brief Get Memory address.
* @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
* @rmtoll CMAR MA LL_DMA_GetMemoryAddress
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
*/
__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CMAR));
}
/**
* @brief Get Peripheral address.
* @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
* @rmtoll CPAR PA LL_DMA_GetPeriphAddress
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
*/
__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CPAR));
}
/**
* @brief Set the Memory to Memory Source address.
* @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
* @note This API must not be called when the DMA channel is enabled.
* @rmtoll CPAR PA LL_DMA_SetM2MSrcAddress
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
* @retval None
*/
__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CPAR, MemoryAddress);
}
/**
* @brief Set the Memory to Memory Destination address.
* @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
* @note This API must not be called when the DMA channel is enabled.
* @rmtoll CMAR MA LL_DMA_SetM2MDstAddress
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
* @retval None
*/
__STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CMAR, MemoryAddress);
}
/**
* @brief Get the Memory to Memory Source address.
* @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
* @rmtoll CPAR PA LL_DMA_GetM2MSrcAddress
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
*/
__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CPAR));
}
/**
* @brief Get the Memory to Memory Destination address.
* @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
* @rmtoll CMAR MA LL_DMA_GetM2MDstAddress
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
*/
__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CMAR));
}
/**
* @brief Set DMA request for DMA instance on Channel x.
* @note Please refer to Reference Manual to get the available mapping of Request value link to Channel Selection.
* @rmtoll CSELR C1S LL_DMA_SetPeriphRequest\n
* CSELR C2S LL_DMA_SetPeriphRequest\n
* CSELR C3S LL_DMA_SetPeriphRequest\n
* CSELR C4S LL_DMA_SetPeriphRequest\n
* CSELR C5S LL_DMA_SetPeriphRequest\n
* CSELR C6S LL_DMA_SetPeriphRequest\n
* CSELR C7S LL_DMA_SetPeriphRequest
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @param PeriphRequest This parameter can be one of the following values:
* @arg @ref LL_DMAMUX_REQ_MEM2MEM
* @arg @ref LL_DMAMUX_REQ_GENERATOR0
* @arg @ref LL_DMAMUX_REQ_GENERATOR1
* @arg @ref LL_DMAMUX_REQ_GENERATOR2
* @arg @ref LL_DMAMUX_REQ_GENERATOR3
* @arg @ref LL_DMAMUX_REQ_ADC1
* @arg @ref LL_DMAMUX_REQ_DAC1_CH1
* @arg @ref LL_DMAMUX_REQ_DAC1_CH2
* @arg @ref LL_DMAMUX_REQ_TIM6_UP
* @arg @ref LL_DMAMUX_REQ_TIM7_UP
* @arg @ref LL_DMAMUX_REQ_SPI1_RX
* @arg @ref LL_DMAMUX_REQ_SPI1_TX
* @arg @ref LL_DMAMUX_REQ_SPI2_RX
* @arg @ref LL_DMAMUX_REQ_SPI2_TX
* @arg @ref LL_DMAMUX_REQ_SPI3_RX
* @arg @ref LL_DMAMUX_REQ_SPI3_TX
* @arg @ref LL_DMAMUX_REQ_I2C1_RX
* @arg @ref LL_DMAMUX_REQ_I2C1_TX
* @arg @ref LL_DMAMUX_REQ_I2C2_RX
* @arg @ref LL_DMAMUX_REQ_I2C2_TX
* @arg @ref LL_DMAMUX_REQ_I2C3_RX
* @arg @ref LL_DMAMUX_REQ_I2C3_TX (*)
* @arg @ref LL_DMAMUX_REQ_I2C4_RX (*)
* @arg @ref LL_DMAMUX_REQ_I2C4_TX
* @arg @ref LL_DMAMUX_REQ_USART1_RX
* @arg @ref LL_DMAMUX_REQ_USART1_TX
* @arg @ref LL_DMAMUX_REQ_USART2_RX
* @arg @ref LL_DMAMUX_REQ_USART2_TX
* @arg @ref LL_DMAMUX_REQ_USART3_RX
* @arg @ref LL_DMAMUX_REQ_USART3_TX
* @arg @ref LL_DMAMUX_REQ_UART4_RX
* @arg @ref LL_DMAMUX_REQ_UART4_TX
* @arg @ref LL_DMAMUX_REQ_UART5_RX (*)
* @arg @ref LL_DMAMUX_REQ_UART5_TX (*)
* @arg @ref LL_DMAMUX_REQ_LPUART1_RX
* @arg @ref LL_DMAMUX_REQ_LPUART1_TX
* @arg @ref LL_DMAMUX_REQ_ADC2
* @arg @ref LL_DMAMUX_REQ_ADC3 (*)
* @arg @ref LL_DMAMUX_REQ_ADC4 (*)
* @arg @ref LL_DMAMUX_REQ_ADC5 (*)
* @arg @ref LL_DMAMUX_REQ_QSPI (*)
* @arg @ref LL_DMAMUX_REQ_DAC2_CH1 (*)
* @arg @ref LL_DMAMUX_REQ_TIM1_CH1
* @arg @ref LL_DMAMUX_REQ_TIM1_CH2
* @arg @ref LL_DMAMUX_REQ_TIM1_CH3
* @arg @ref LL_DMAMUX_REQ_TIM1_CH4
* @arg @ref LL_DMAMUX_REQ_TIM1_UP
* @arg @ref LL_DMAMUX_REQ_TIM1_TRIG
* @arg @ref LL_DMAMUX_REQ_TIM1_COM
* @arg @ref LL_DMAMUX_REQ_TIM8_CH1
* @arg @ref LL_DMAMUX_REQ_TIM8_CH2
* @arg @ref LL_DMAMUX_REQ_TIM8_CH3
* @arg @ref LL_DMAMUX_REQ_TIM8_CH4
* @arg @ref LL_DMAMUX_REQ_TIM8_UP
* @arg @ref LL_DMAMUX_REQ_TIM8_TRIG
* @arg @ref LL_DMAMUX_REQ_TIM8_COM
* @arg @ref LL_DMAMUX_REQ_TIM2_CH1
* @arg @ref LL_DMAMUX_REQ_TIM2_CH2
* @arg @ref LL_DMAMUX_REQ_TIM2_CH3
* @arg @ref LL_DMAMUX_REQ_TIM2_CH4
* @arg @ref LL_DMAMUX_REQ_TIM2_UP
* @arg @ref LL_DMAMUX_REQ_TIM3_CH1
* @arg @ref LL_DMAMUX_REQ_TIM3_CH2
* @arg @ref LL_DMAMUX_REQ_TIM3_CH3
* @arg @ref LL_DMAMUX_REQ_TIM3_CH4
* @arg @ref LL_DMAMUX_REQ_TIM3_UP
* @arg @ref LL_DMAMUX_REQ_TIM3_TRIG
* @arg @ref LL_DMAMUX_REQ_TIM4_CH1
* @arg @ref LL_DMAMUX_REQ_TIM4_CH2
* @arg @ref LL_DMAMUX_REQ_TIM4_CH3
* @arg @ref LL_DMAMUX_REQ_TIM4_CH4
* @arg @ref LL_DMAMUX_REQ_TIM4_UP
* @arg @ref LL_DMAMUX_REQ_TIM5_CH1 (*)
* @arg @ref LL_DMAMUX_REQ_TIM5_CH2 (*)
* @arg @ref LL_DMAMUX_REQ_TIM5_CH3 (*)
* @arg @ref LL_DMAMUX_REQ_TIM5_CH4 (*)
* @arg @ref LL_DMAMUX_REQ_TIM5_UP (*)
* @arg @ref LL_DMAMUX_REQ_TIM5_TRIG (*)
* @arg @ref LL_DMAMUX_REQ_TIM15_CH1
* @arg @ref LL_DMAMUX_REQ_TIM15_UP
* @arg @ref LL_DMAMUX_REQ_TIM15_TRIG
* @arg @ref LL_DMAMUX_REQ_TIM15_COM
* @arg @ref LL_DMAMUX_REQ_TIM16_CH1
* @arg @ref LL_DMAMUX_REQ_TIM16_UP
* @arg @ref LL_DMAMUX_REQ_TIM17_CH1
* @arg @ref LL_DMAMUX_REQ_TIM17_UP
* @arg @ref LL_DMAMUX_REQ_TIM20_CH1 (*)
* @arg @ref LL_DMAMUX_REQ_TIM20_CH2 (*)
* @arg @ref LL_DMAMUX_REQ_TIM20_CH3 (*)
* @arg @ref LL_DMAMUX_REQ_TIM20_CH4 (*)
* @arg @ref LL_DMAMUX_REQ_TIM20_UP (*)
* @arg @ref LL_DMAMUX_REQ_AES_IN
* @arg @ref LL_DMAMUX_REQ_AES_OUT
* @arg @ref LL_DMAMUX_REQ_TIM20_TRIG (*)
* @arg @ref LL_DMAMUX_REQ_TIM20_COM (*)
* @arg @ref LL_DMAMUX_REQ_HRTIM1_M (*)
* @arg @ref LL_DMAMUX_REQ_HRTIM1_A (*)
* @arg @ref LL_DMAMUX_REQ_HRTIM1_B (*)
* @arg @ref LL_DMAMUX_REQ_HRTIM1_C (*)
* @arg @ref LL_DMAMUX_REQ_HRTIM1_D (*)
* @arg @ref LL_DMAMUX_REQ_HRTIM1_E (*)
* @arg @ref LL_DMAMUX_REQ_HRTIM1_F (*)
* @arg @ref LL_DMAMUX_REQ_DAC3_CH1
* @arg @ref LL_DMAMUX_REQ_DAC3_CH2
* @arg @ref LL_DMAMUX_REQ_DAC4_CH1 (*)
* @arg @ref LL_DMAMUX_REQ_DAC4_CH2 (*)
* @arg @ref LL_DMAMUX_REQ_SPI4_RX (*)
* @arg @ref LL_DMAMUX_REQ_SPI4_TX (*)
* @arg @ref LL_DMAMUX_REQ_SAI1_A
* @arg @ref LL_DMAMUX_REQ_SAI1_B
* @arg @ref LL_DMAMUX_REQ_FMAC_WRITE
* @arg @ref LL_DMAMUX_REQ_FMAC_READ
* @arg @ref LL_DMAMUX_REQ_CORDIC_WRITE
* @arg @ref LL_DMAMUX_REQ_CORDIC_READ
* @arg @ref LL_DMAMUX_REQ_UCPD1_RX
* @arg @ref LL_DMAMUX_REQ_UCPD1_TX
* (*) Not on all G4 devices
* @retval None
*/
__STATIC_INLINE void LL_DMA_SetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphRequest)
{
uint32_t dmamux_ccr_offset = ((((uint32_t)DMAx ^ (uint32_t)DMA1) >> 10U) * 8U);
MODIFY_REG((DMAMUX1_Channel0 + Channel + dmamux_ccr_offset)->CCR, DMAMUX_CxCR_DMAREQ_ID, PeriphRequest);
}
/**
* @brief Get DMA request for DMA instance on Channel x.
* @rmtoll CSELR C1S LL_DMA_GetPeriphRequest\n
* CSELR C2S LL_DMA_GetPeriphRequest\n
* CSELR C3S LL_DMA_GetPeriphRequest\n
* CSELR C4S LL_DMA_GetPeriphRequest\n
* CSELR C5S LL_DMA_GetPeriphRequest\n
* CSELR C6S LL_DMA_GetPeriphRequest\n
* CSELR C7S LL_DMA_GetPeriphRequest
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval Returned value can be one of the following values:
* @arg @ref LL_DMAMUX_REQ_MEM2MEM
* @arg @ref LL_DMAMUX_REQ_GENERATOR0
* @arg @ref LL_DMAMUX_REQ_GENERATOR1
* @arg @ref LL_DMAMUX_REQ_GENERATOR2
* @arg @ref LL_DMAMUX_REQ_GENERATOR3
* @arg @ref LL_DMAMUX_REQ_ADC1
* @arg @ref LL_DMAMUX_REQ_DAC1_CH1
* @arg @ref LL_DMAMUX_REQ_DAC1_CH2
* @arg @ref LL_DMAMUX_REQ_TIM6_UP
* @arg @ref LL_DMAMUX_REQ_TIM7_UP
* @arg @ref LL_DMAMUX_REQ_SPI1_RX
* @arg @ref LL_DMAMUX_REQ_SPI1_TX
* @arg @ref LL_DMAMUX_REQ_SPI2_RX
* @arg @ref LL_DMAMUX_REQ_SPI2_TX
* @arg @ref LL_DMAMUX_REQ_SPI3_RX
* @arg @ref LL_DMAMUX_REQ_SPI3_TX
* @arg @ref LL_DMAMUX_REQ_I2C1_RX
* @arg @ref LL_DMAMUX_REQ_I2C1_TX
* @arg @ref LL_DMAMUX_REQ_I2C2_RX
* @arg @ref LL_DMAMUX_REQ_I2C2_TX
* @arg @ref LL_DMAMUX_REQ_I2C3_RX
* @arg @ref LL_DMAMUX_REQ_I2C3_TX (*)
* @arg @ref LL_DMAMUX_REQ_I2C4_RX (*)
* @arg @ref LL_DMAMUX_REQ_I2C4_TX
* @arg @ref LL_DMAMUX_REQ_USART1_RX
* @arg @ref LL_DMAMUX_REQ_USART1_TX
* @arg @ref LL_DMAMUX_REQ_USART2_RX
* @arg @ref LL_DMAMUX_REQ_USART2_TX
* @arg @ref LL_DMAMUX_REQ_USART3_RX
* @arg @ref LL_DMAMUX_REQ_USART3_TX
* @arg @ref LL_DMAMUX_REQ_UART4_RX
* @arg @ref LL_DMAMUX_REQ_UART4_TX
* @arg @ref LL_DMAMUX_REQ_UART5_RX (*)
* @arg @ref LL_DMAMUX_REQ_UART5_TX (*)
* @arg @ref LL_DMAMUX_REQ_LPUART1_RX
* @arg @ref LL_DMAMUX_REQ_LPUART1_TX
* @arg @ref LL_DMAMUX_REQ_ADC2
* @arg @ref LL_DMAMUX_REQ_ADC3 (*)
* @arg @ref LL_DMAMUX_REQ_ADC4 (*)
* @arg @ref LL_DMAMUX_REQ_ADC5 (*)
* @arg @ref LL_DMAMUX_REQ_QSPI (*)
* @arg @ref LL_DMAMUX_REQ_DAC2_CH1 (*)
* @arg @ref LL_DMAMUX_REQ_TIM1_CH1
* @arg @ref LL_DMAMUX_REQ_TIM1_CH2
* @arg @ref LL_DMAMUX_REQ_TIM1_CH3
* @arg @ref LL_DMAMUX_REQ_TIM1_CH4
* @arg @ref LL_DMAMUX_REQ_TIM1_UP
* @arg @ref LL_DMAMUX_REQ_TIM1_TRIG
* @arg @ref LL_DMAMUX_REQ_TIM1_COM
* @arg @ref LL_DMAMUX_REQ_TIM8_CH1
* @arg @ref LL_DMAMUX_REQ_TIM8_CH2
* @arg @ref LL_DMAMUX_REQ_TIM8_CH3
* @arg @ref LL_DMAMUX_REQ_TIM8_CH4
* @arg @ref LL_DMAMUX_REQ_TIM8_UP
* @arg @ref LL_DMAMUX_REQ_TIM8_TRIG
* @arg @ref LL_DMAMUX_REQ_TIM8_COM
* @arg @ref LL_DMAMUX_REQ_TIM2_CH1
* @arg @ref LL_DMAMUX_REQ_TIM2_CH2
* @arg @ref LL_DMAMUX_REQ_TIM2_CH3
* @arg @ref LL_DMAMUX_REQ_TIM2_CH4
* @arg @ref LL_DMAMUX_REQ_TIM2_UP
* @arg @ref LL_DMAMUX_REQ_TIM3_CH1
* @arg @ref LL_DMAMUX_REQ_TIM3_CH2
* @arg @ref LL_DMAMUX_REQ_TIM3_CH3
* @arg @ref LL_DMAMUX_REQ_TIM3_CH4
* @arg @ref LL_DMAMUX_REQ_TIM3_UP
* @arg @ref LL_DMAMUX_REQ_TIM3_TRIG
* @arg @ref LL_DMAMUX_REQ_TIM4_CH1
* @arg @ref LL_DMAMUX_REQ_TIM4_CH2
* @arg @ref LL_DMAMUX_REQ_TIM4_CH3
* @arg @ref LL_DMAMUX_REQ_TIM4_CH4
* @arg @ref LL_DMAMUX_REQ_TIM4_UP
* @arg @ref LL_DMAMUX_REQ_TIM5_CH1 (*)
* @arg @ref LL_DMAMUX_REQ_TIM5_CH2 (*)
* @arg @ref LL_DMAMUX_REQ_TIM5_CH3 (*)
* @arg @ref LL_DMAMUX_REQ_TIM5_CH4 (*)
* @arg @ref LL_DMAMUX_REQ_TIM5_UP (*)
* @arg @ref LL_DMAMUX_REQ_TIM5_TRIG (*)
* @arg @ref LL_DMAMUX_REQ_TIM15_CH1
* @arg @ref LL_DMAMUX_REQ_TIM15_UP
* @arg @ref LL_DMAMUX_REQ_TIM15_TRIG
* @arg @ref LL_DMAMUX_REQ_TIM15_COM
* @arg @ref LL_DMAMUX_REQ_TIM16_CH1
* @arg @ref LL_DMAMUX_REQ_TIM16_UP
* @arg @ref LL_DMAMUX_REQ_TIM17_CH1
* @arg @ref LL_DMAMUX_REQ_TIM17_UP
* @arg @ref LL_DMAMUX_REQ_TIM20_CH1 (*)
* @arg @ref LL_DMAMUX_REQ_TIM20_CH2 (*)
* @arg @ref LL_DMAMUX_REQ_TIM20_CH3 (*)
* @arg @ref LL_DMAMUX_REQ_TIM20_CH4 (*)
* @arg @ref LL_DMAMUX_REQ_TIM20_UP (*)
* @arg @ref LL_DMAMUX_REQ_AES_IN
* @arg @ref LL_DMAMUX_REQ_AES_OUT
* @arg @ref LL_DMAMUX_REQ_TIM20_TRIG (*)
* @arg @ref LL_DMAMUX_REQ_TIM20_COM (*)
* @arg @ref LL_DMAMUX_REQ_HRTIM1_M (*)
* @arg @ref LL_DMAMUX_REQ_HRTIM1_A (*)
* @arg @ref LL_DMAMUX_REQ_HRTIM1_B (*)
* @arg @ref LL_DMAMUX_REQ_HRTIM1_C (*)
* @arg @ref LL_DMAMUX_REQ_HRTIM1_D (*)
* @arg @ref LL_DMAMUX_REQ_HRTIM1_E (*)
* @arg @ref LL_DMAMUX_REQ_HRTIM1_F (*)
* @arg @ref LL_DMAMUX_REQ_DAC3_CH1
* @arg @ref LL_DMAMUX_REQ_DAC3_CH2
* @arg @ref LL_DMAMUX_REQ_DAC4_CH1 (*)
* @arg @ref LL_DMAMUX_REQ_DAC4_CH2 (*)
* @arg @ref LL_DMAMUX_REQ_SPI4_RX (*)
* @arg @ref LL_DMAMUX_REQ_SPI4_TX (*)
* @arg @ref LL_DMAMUX_REQ_SAI1_A
* @arg @ref LL_DMAMUX_REQ_SAI1_B
* @arg @ref LL_DMAMUX_REQ_FMAC_WRITE
* @arg @ref LL_DMAMUX_REQ_FMAC_READ
* @arg @ref LL_DMAMUX_REQ_CORDIC_WRITE
* @arg @ref LL_DMAMUX_REQ_CORDIC_READ
* @arg @ref LL_DMAMUX_REQ_UCPD1_RX
* @arg @ref LL_DMAMUX_REQ_UCPD1_TX
* (*) Not on all G4 devices
*/
__STATIC_INLINE uint32_t LL_DMA_GetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dmamux_ccr_offset = ((((uint32_t)DMAx ^ (uint32_t)DMA1) >> 10U) * 8U);
return (READ_BIT((DMAMUX1_Channel0 + Channel + dmamux_ccr_offset)->CCR, DMAMUX_CxCR_DMAREQ_ID));
}
/**
* @}
*/
/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management
* @{
*/
/**
* @brief Get Channel 1 global interrupt flag.
* @rmtoll ISR GIF1 LL_DMA_IsActiveFlag_GI1
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI1(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF1) == (DMA_ISR_GIF1)) ? 1UL : 0UL);
}
/**
* @brief Get Channel 2 global interrupt flag.
* @rmtoll ISR GIF2 LL_DMA_IsActiveFlag_GI2
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI2(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF2) == (DMA_ISR_GIF2)) ? 1UL : 0UL);
}
/**
* @brief Get Channel 3 global interrupt flag.
* @rmtoll ISR GIF3 LL_DMA_IsActiveFlag_GI3
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI3(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF3) == (DMA_ISR_GIF3)) ? 1UL : 0UL);
}
/**
* @brief Get Channel 4 global interrupt flag.
* @rmtoll ISR GIF4 LL_DMA_IsActiveFlag_GI4
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI4(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF4) == (DMA_ISR_GIF4)) ? 1UL : 0UL);
}
/**
* @brief Get Channel 5 global interrupt flag.
* @rmtoll ISR GIF5 LL_DMA_IsActiveFlag_GI5
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI5(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF5) == (DMA_ISR_GIF5)) ? 1UL : 0UL);
}
/**
* @brief Get Channel 6 global interrupt flag.
* @rmtoll ISR GIF6 LL_DMA_IsActiveFlag_GI6
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI6(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF6) == (DMA_ISR_GIF6)) ? 1UL : 0UL);
}
#if defined (DMA1_Channel7)
/**
* @brief Get Channel 7 global interrupt flag.
* @rmtoll ISR GIF7 LL_DMA_IsActiveFlag_GI7
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI7(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF7) == (DMA_ISR_GIF7)) ? 1UL : 0UL);
}
#endif /* DMA1_Channel7 */
#if defined (DMA1_Channel8)
/**
* @brief Get Channel 8 global interrupt flag.
* @rmtoll ISR GIF8 LL_DMA_IsActiveFlag_GI8
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI8(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF8) == (DMA_ISR_GIF8)) ? 1UL : 0UL);
}
#endif /* DMA1_Channel8 */
/**
* @brief Get Channel 1 transfer complete flag.
* @rmtoll ISR TCIF1 LL_DMA_IsActiveFlag_TC1
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF1) == (DMA_ISR_TCIF1)) ? 1UL : 0UL);
}
/**
* @brief Get Channel 2 transfer complete flag.
* @rmtoll ISR TCIF2 LL_DMA_IsActiveFlag_TC2
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF2) == (DMA_ISR_TCIF2)) ? 1UL : 0UL);
}
/**
* @brief Get Channel 3 transfer complete flag.
* @rmtoll ISR TCIF3 LL_DMA_IsActiveFlag_TC3
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF3) == (DMA_ISR_TCIF3)) ? 1UL : 0UL);
}
/**
* @brief Get Channel 4 transfer complete flag.
* @rmtoll ISR TCIF4 LL_DMA_IsActiveFlag_TC4
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF4) == (DMA_ISR_TCIF4)) ? 1UL : 0UL);
}
/**
* @brief Get Channel 5 transfer complete flag.
* @rmtoll ISR TCIF5 LL_DMA_IsActiveFlag_TC5
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF5) == (DMA_ISR_TCIF5)) ? 1UL : 0UL);
}
/**
* @brief Get Channel 6 transfer complete flag.
* @rmtoll ISR TCIF6 LL_DMA_IsActiveFlag_TC6
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF6) == (DMA_ISR_TCIF6)) ? 1UL : 0UL);
}
#if defined (DMA1_Channel7)
/**
* @brief Get Channel 7 transfer complete flag.
* @rmtoll ISR TCIF7 LL_DMA_IsActiveFlag_TC7
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF7) == (DMA_ISR_TCIF7)) ? 1UL : 0UL);
}
#endif /* DMA1_Channel7 */
#if defined (DMA1_Channel8)
/**
* @brief Get Channel 8 transfer complete flag.
* @rmtoll ISR TCIF8 LL_DMA_IsActiveFlag_TC8
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC8(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF8) == (DMA_ISR_TCIF8)) ? 1UL : 0UL);
}
#endif /* DMA1_Channel8 */
/**
* @brief Get Channel 1 half transfer flag.
* @rmtoll ISR HTIF1 LL_DMA_IsActiveFlag_HT1
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF1) == (DMA_ISR_HTIF1)) ? 1UL : 0UL);
}
/**
* @brief Get Channel 2 half transfer flag.
* @rmtoll ISR HTIF2 LL_DMA_IsActiveFlag_HT2
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF2) == (DMA_ISR_HTIF2)) ? 1UL : 0UL);
}
/**
* @brief Get Channel 3 half transfer flag.
* @rmtoll ISR HTIF3 LL_DMA_IsActiveFlag_HT3
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF3) == (DMA_ISR_HTIF3)) ? 1UL : 0UL);
}
/**
* @brief Get Channel 4 half transfer flag.
* @rmtoll ISR HTIF4 LL_DMA_IsActiveFlag_HT4
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF4) == (DMA_ISR_HTIF4)) ? 1UL : 0UL);
}
/**
* @brief Get Channel 5 half transfer flag.
* @rmtoll ISR HTIF5 LL_DMA_IsActiveFlag_HT5
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF5) == (DMA_ISR_HTIF5)) ? 1UL : 0UL);
}
/**
* @brief Get Channel 6 half transfer flag.
* @rmtoll ISR HTIF6 LL_DMA_IsActiveFlag_HT6
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF6) == (DMA_ISR_HTIF6)) ? 1UL : 0UL);
}
#if defined (DMA1_Channel8)
/**
* @brief Get Channel 7 half transfer flag.
* @rmtoll ISR HTIF7 LL_DMA_IsActiveFlag_HT7
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF7) == (DMA_ISR_HTIF7)) ? 1UL : 0UL);
}
#endif /* DMA1_Channel7 */
#if defined (DMA1_Channel8)
/**
* @brief Get Channel 8 half transfer flag.
* @rmtoll ISR HTIF8 LL_DMA_IsActiveFlag_HT8
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT8(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF8) == (DMA_ISR_HTIF8)) ? 1UL : 0UL);
}
#endif /* DMA1_Channel8 */
/**
* @brief Get Channel 1 transfer error flag.
* @rmtoll ISR TEIF1 LL_DMA_IsActiveFlag_TE1
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF1) == (DMA_ISR_TEIF1)) ? 1UL : 0UL);
}
/**
* @brief Get Channel 2 transfer error flag.
* @rmtoll ISR TEIF2 LL_DMA_IsActiveFlag_TE2
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF2) == (DMA_ISR_TEIF2)) ? 1UL : 0UL);
}
/**
* @brief Get Channel 3 transfer error flag.
* @rmtoll ISR TEIF3 LL_DMA_IsActiveFlag_TE3
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF3) == (DMA_ISR_TEIF3)) ? 1UL : 0UL);
}
/**
* @brief Get Channel 4 transfer error flag.
* @rmtoll ISR TEIF4 LL_DMA_IsActiveFlag_TE4
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF4) == (DMA_ISR_TEIF4)) ? 1UL : 0UL);
}
/**
* @brief Get Channel 5 transfer error flag.
* @rmtoll ISR TEIF5 LL_DMA_IsActiveFlag_TE5
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF5) == (DMA_ISR_TEIF5)) ? 1UL : 0UL);
}
/**
* @brief Get Channel 6 transfer error flag.
* @rmtoll ISR TEIF6 LL_DMA_IsActiveFlag_TE6
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF6) == (DMA_ISR_TEIF6)) ? 1UL : 0UL);
}
#if defined (DMA1_Channel7)
/**
* @brief Get Channel 7 transfer error flag.
* @rmtoll ISR TEIF7 LL_DMA_IsActiveFlag_TE7
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF7) == (DMA_ISR_TEIF7)) ? 1UL : 0UL);
}
#endif /* DMA1_Channel7 */
#if defined (DMA1_Channel8)
/**
* @brief Get Channel 8 transfer error flag.
* @rmtoll ISR TEIF8 LL_DMA_IsActiveFlag_TE8
* @param DMAx DMAx Instance
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE8(DMA_TypeDef *DMAx)
{
return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF8) == (DMA_ISR_TEIF8)) ? 1UL : 0UL);
}
#endif /* DMA1_Channel8 */
/**
* @brief Clear Channel 1 global interrupt flag.
* @note Do not Clear Channel 1 global interrupt flag when the channel in ON.
Instead clear specific flags transfer complete, half transfer & transfer
error flag with LL_DMA_ClearFlag_TC1, LL_DMA_ClearFlag_HT1,
LL_DMA_ClearFlag_TE1. bug id 2.3.1 in Product Errata Sheet.
* @rmtoll IFCR CGIF1 LL_DMA_ClearFlag_GI1
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_GI1(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF1);
}
/**
* @brief Clear Channel 2 global interrupt flag.
* @note Do not Clear Channel 2 global interrupt flag when the channel in ON.
Instead clear specific flags transfer complete, half transfer & transfer
error flag with LL_DMA_ClearFlag_TC2, LL_DMA_ClearFlag_HT2,
LL_DMA_ClearFlag_TE2. bug id 2.3.1 in Product Errata Sheet.
* @rmtoll IFCR CGIF2 LL_DMA_ClearFlag_GI2
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_GI2(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF2);
}
/**
* @brief Clear Channel 3 global interrupt flag.
* @note Do not Clear Channel 3 global interrupt flag when the channel in ON.
Instead clear specific flags transfer complete, half transfer & transfer
error flag with LL_DMA_ClearFlag_TC3, LL_DMA_ClearFlag_HT3,
LL_DMA_ClearFlag_TE3. bug id 2.3.1 in Product Errata Sheet.
* @rmtoll IFCR CGIF3 LL_DMA_ClearFlag_GI3
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_GI3(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF3);
}
/**
* @brief Clear Channel 4 global interrupt flag.
* @note Do not Clear Channel 4 global interrupt flag when the channel in ON.
Instead clear specific flags transfer complete, half transfer & transfer
error flag with LL_DMA_ClearFlag_TC4, LL_DMA_ClearFlag_HT4,
LL_DMA_ClearFlag_TE4. bug id 2.3.1 in Product Errata Sheet.
* @rmtoll IFCR CGIF4 LL_DMA_ClearFlag_GI4
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_GI4(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF4);
}
/**
* @brief Clear Channel 5 global interrupt flag.
* @note Do not Clear Channel 5 global interrupt flag when the channel in ON.
Instead clear specific flags transfer complete, half transfer & transfer
error flag with LL_DMA_ClearFlag_TC5, LL_DMA_ClearFlag_HT5,
LL_DMA_ClearFlag_TE5. bug id 2.3.1 in Product Errata Sheet.
* @rmtoll IFCR CGIF5 LL_DMA_ClearFlag_GI5
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_GI5(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF5);
}
/**
* @brief Clear Channel 6 global interrupt flag.
* @note Do not Clear Channel 6 global interrupt flag when the channel in ON.
Instead clear specific flags transfer complete, half transfer & transfer
error flag with LL_DMA_ClearFlag_TC6, LL_DMA_ClearFlag_HT6,
LL_DMA_ClearFlag_TE6. bug id 2.3.1 in Product Errata Sheet.
* @rmtoll IFCR CGIF6 LL_DMA_ClearFlag_GI6
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_GI6(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF6);
}
#if defined (DMA1_Channel7)
/**
* @brief Clear Channel 7 global interrupt flag.
* @note Do not Clear Channel 7 global interrupt flag when the channel in ON.
Instead clear specific flags transfer complete, half transfer & transfer
error flag with LL_DMA_ClearFlag_TC7, LL_DMA_ClearFlag_HT7,
LL_DMA_ClearFlag_TE7. bug id 2.3.1 in Product Errata Sheet.
* @rmtoll IFCR CGIF7 LL_DMA_ClearFlag_GI7
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_GI7(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF7);
}
#endif /* DMA1_Channel7 */
#if defined (DMA1_Channel8)
/**
* @brief Clear Channel 8 global interrupt flag.
* @note Do not Clear Channel 8 global interrupt flag when the channel in ON.
Instead clear specific flags transfer complete, half transfer & transfer
error flag with LL_DMA_ClearFlag_TC8, LL_DMA_ClearFlag_HT8,
LL_DMA_ClearFlag_TE8. bug id 2.3.1 in Product Errata Sheet.
* @rmtoll IFCR CGIF8 LL_DMA_ClearFlag_GI8
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_GI8(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF8);
}
#endif /* DMA1_Channel8 */
/**
* @brief Clear Channel 1 transfer complete flag.
* @rmtoll IFCR CTCIF1 LL_DMA_ClearFlag_TC1
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF1);
}
/**
* @brief Clear Channel 2 transfer complete flag.
* @rmtoll IFCR CTCIF2 LL_DMA_ClearFlag_TC2
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF2);
}
/**
* @brief Clear Channel 3 transfer complete flag.
* @rmtoll IFCR CTCIF3 LL_DMA_ClearFlag_TC3
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF3);
}
/**
* @brief Clear Channel 4 transfer complete flag.
* @rmtoll IFCR CTCIF4 LL_DMA_ClearFlag_TC4
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF4);
}
/**
* @brief Clear Channel 5 transfer complete flag.
* @rmtoll IFCR CTCIF5 LL_DMA_ClearFlag_TC5
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF5);
}
/**
* @brief Clear Channel 6 transfer complete flag.
* @rmtoll IFCR CTCIF6 LL_DMA_ClearFlag_TC6
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF6);
}
#if defined (DMA1_Channel7)
/**
* @brief Clear Channel 7 transfer complete flag.
* @rmtoll IFCR CTCIF7 LL_DMA_ClearFlag_TC7
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF7);
}
#endif /* DMA1_Channel7 */
#if defined (DMA1_Channel8)
/**
* @brief Clear Channel 8 transfer complete flag.
* @rmtoll IFCR CTCIF8 LL_DMA_ClearFlag_TC8
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_TC8(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF8);
}
#endif /* DMA1_Channel8 */
/**
* @brief Clear Channel 1 half transfer flag.
* @rmtoll IFCR CHTIF1 LL_DMA_ClearFlag_HT1
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF1);
}
/**
* @brief Clear Channel 2 half transfer flag.
* @rmtoll IFCR CHTIF2 LL_DMA_ClearFlag_HT2
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF2);
}
/**
* @brief Clear Channel 3 half transfer flag.
* @rmtoll IFCR CHTIF3 LL_DMA_ClearFlag_HT3
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF3);
}
/**
* @brief Clear Channel 4 half transfer flag.
* @rmtoll IFCR CHTIF4 LL_DMA_ClearFlag_HT4
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF4);
}
/**
* @brief Clear Channel 5 half transfer flag.
* @rmtoll IFCR CHTIF5 LL_DMA_ClearFlag_HT5
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF5);
}
/**
* @brief Clear Channel 6 half transfer flag.
* @rmtoll IFCR CHTIF6 LL_DMA_ClearFlag_HT6
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF6);
}
#if defined (DMA1_Channel7)
/**
* @brief Clear Channel 7 half transfer flag.
* @rmtoll IFCR CHTIF7 LL_DMA_ClearFlag_HT7
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF7);
}
#endif /* DMA1_Channel7 */
#if defined (DMA1_Channel8)
/**
* @brief Clear Channel 8 half transfer flag.
* @rmtoll IFCR CHTIF8 LL_DMA_ClearFlag_HT8
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_HT8(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF8);
}
#endif /* DMA1_Channel8 */
/**
* @brief Clear Channel 1 transfer error flag.
* @rmtoll IFCR CTEIF1 LL_DMA_ClearFlag_TE1
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF1);
}
/**
* @brief Clear Channel 2 transfer error flag.
* @rmtoll IFCR CTEIF2 LL_DMA_ClearFlag_TE2
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF2);
}
/**
* @brief Clear Channel 3 transfer error flag.
* @rmtoll IFCR CTEIF3 LL_DMA_ClearFlag_TE3
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF3);
}
/**
* @brief Clear Channel 4 transfer error flag.
* @rmtoll IFCR CTEIF4 LL_DMA_ClearFlag_TE4
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF4);
}
/**
* @brief Clear Channel 5 transfer error flag.
* @rmtoll IFCR CTEIF5 LL_DMA_ClearFlag_TE5
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF5);
}
/**
* @brief Clear Channel 6 transfer error flag.
* @rmtoll IFCR CTEIF6 LL_DMA_ClearFlag_TE6
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF6);
}
#if defined (DMA1_Channel7)
/**
* @brief Clear Channel 7 transfer error flag.
* @rmtoll IFCR CTEIF7 LL_DMA_ClearFlag_TE7
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF7);
}
#endif /* DMA1_Channel7 */
#if defined (DMA1_Channel8)
/**
* @brief Clear Channel 8 transfer error flag.
* @rmtoll IFCR CTEIF8 LL_DMA_ClearFlag_TE8
* @param DMAx DMAx Instance
* @retval None
*/
__STATIC_INLINE void LL_DMA_ClearFlag_TE8(DMA_TypeDef *DMAx)
{
WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF8);
}
#endif /* DMA1_Channel8 */
/**
* @}
*/
/** @defgroup DMA_LL_EF_IT_Management IT_Management
* @{
*/
/**
* @brief Enable Transfer complete interrupt.
* @rmtoll CCR TCIE LL_DMA_EnableIT_TC
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval None
*/
__STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_TCIE);
}
/**
* @brief Enable Half transfer interrupt.
* @rmtoll CCR HTIE LL_DMA_EnableIT_HT
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval None
*/
__STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_HTIE);
}
/**
* @brief Enable Transfer error interrupt.
* @rmtoll CCR TEIE LL_DMA_EnableIT_TE
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval None
*/
__STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_TEIE);
}
/**
* @brief Disable Transfer complete interrupt.
* @rmtoll CCR TCIE LL_DMA_DisableIT_TC
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval None
*/
__STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_TCIE);
}
/**
* @brief Disable Half transfer interrupt.
* @rmtoll CCR HTIE LL_DMA_DisableIT_HT
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval None
*/
__STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_HTIE);
}
/**
* @brief Disable Transfer error interrupt.
* @rmtoll CCR TEIE LL_DMA_DisableIT_TE
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval None
*/
__STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR, DMA_CCR_TEIE);
}
/**
* @brief Check if Transfer complete Interrupt is enabled.
* @rmtoll CCR TCIE LL_DMA_IsEnabledIT_TC
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
return ((READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR,
DMA_CCR_TCIE) == (DMA_CCR_TCIE)) ? 1UL : 0UL);
}
/**
* @brief Check if Half transfer Interrupt is enabled.
* @rmtoll CCR HTIE LL_DMA_IsEnabledIT_HT
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
return ((READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR,
DMA_CCR_HTIE) == (DMA_CCR_HTIE)) ? 1UL : 0UL);
}
/**
* @brief Check if Transfer error Interrupt is enabled.
* @rmtoll CCR TEIE LL_DMA_IsEnabledIT_TE
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7 (*)
* @arg @ref LL_DMA_CHANNEL_8 (*)
* (*) Not on all G4 devices
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Channel)
{
uint32_t dma_base_addr = (uint32_t)DMAx;
return ((READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel])))->CCR,
DMA_CCR_TEIE) == (DMA_CCR_TEIE)) ? 1UL : 0UL);
}
/**
* @}
*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions
* @{
*/
uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct);
uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel);
void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct);
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/**
* @}
*/
/**
* @}
*/
#endif /* DMA1 || DMA2 */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32G4xx_LL_DMA_H */