Sliders_McGee/Drivers/STM32G4xx_HAL_Driver/Inc/stm32g4xx_ll_bus.h
Chris Trimble 09ca8ceb1f Initial commit.
Base level functionality complete.
Untested on hardware.
2024-06-06 22:01:17 -05:00

1681 lines
73 KiB
C

/**
******************************************************************************
* @file stm32g4xx_ll_bus.h
* @author MCD Application Team
* @brief Header file of BUS LL module.
@verbatim
##### RCC Limitations #####
==============================================================================
[..]
A delay between an RCC peripheral clock enable and the effective peripheral
enabling should be taken into account in order to manage the peripheral read/write
from/to registers.
(+) This delay depends on the peripheral mapping.
(++) AHB & APB peripherals, 1 dummy read is necessary
[..]
Workarounds:
(#) For AHB & APB peripherals, a dummy read to the peripheral register has been
inserted in each LL_{BUS}_GRP{x}_EnableClock() function.
@endverbatim
******************************************************************************
* @attention
*
* Copyright (c) 2019 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file in
* the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32G4xx_LL_BUS_H
#define STM32G4xx_LL_BUS_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g4xx.h"
/** @addtogroup STM32G4xx_LL_Driver
* @{
*/
#if defined(RCC)
/** @defgroup BUS_LL BUS
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants
* @{
*/
/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH
* @{
*/
#define LL_AHB1_GRP1_PERIPH_ALL 0xFFFFFFFFU
#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHB1ENR_DMA1EN
#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHB1ENR_DMA2EN
#define LL_AHB1_GRP1_PERIPH_DMAMUX1 RCC_AHB1ENR_DMAMUX1EN
#define LL_AHB1_GRP1_PERIPH_CORDIC RCC_AHB1ENR_CORDICEN
#define LL_AHB1_GRP1_PERIPH_FMAC RCC_AHB1ENR_FMACEN
#define LL_AHB1_GRP1_PERIPH_FLASH RCC_AHB1ENR_FLASHEN
#define LL_AHB1_GRP1_PERIPH_SRAM1 RCC_AHB1SMENR_SRAM1SMEN
#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHB1ENR_CRCEN
/**
* @}
*/
/** @defgroup BUS_LL_EC_AHB2_GRP1_PERIPH AHB2 GRP1 PERIPH
* @{
*/
#define LL_AHB2_GRP1_PERIPH_ALL 0xFFFFFFFFU
#define LL_AHB2_GRP1_PERIPH_GPIOA RCC_AHB2ENR_GPIOAEN
#define LL_AHB2_GRP1_PERIPH_GPIOB RCC_AHB2ENR_GPIOBEN
#define LL_AHB2_GRP1_PERIPH_GPIOC RCC_AHB2ENR_GPIOCEN
#define LL_AHB2_GRP1_PERIPH_GPIOD RCC_AHB2ENR_GPIODEN
#define LL_AHB2_GRP1_PERIPH_GPIOE RCC_AHB2ENR_GPIOEEN
#define LL_AHB2_GRP1_PERIPH_GPIOF RCC_AHB2ENR_GPIOFEN
#define LL_AHB2_GRP1_PERIPH_GPIOG RCC_AHB2ENR_GPIOGEN
#define LL_AHB2_GRP1_PERIPH_CCM RCC_AHB2SMENR_CCMSMEN
#define LL_AHB2_GRP1_PERIPH_SRAM2 RCC_AHB2SMENR_SRAM2SMEN
#define LL_AHB2_GRP1_PERIPH_ADC12 RCC_AHB2ENR_ADC12EN
#if defined(ADC345_COMMON)
#define LL_AHB2_GRP1_PERIPH_ADC345 RCC_AHB2ENR_ADC345EN
#endif /* ADC345_COMMON */
#define LL_AHB2_GRP1_PERIPH_DAC1 RCC_AHB2ENR_DAC1EN
#if defined(DAC2)
#define LL_AHB2_GRP1_PERIPH_DAC2 RCC_AHB2ENR_DAC2EN
#endif /* DAC2 */
#define LL_AHB2_GRP1_PERIPH_DAC3 RCC_AHB2ENR_DAC3EN
#if defined(DAC4)
#define LL_AHB2_GRP1_PERIPH_DAC4 RCC_AHB2ENR_DAC4EN
#endif /* DAC4 */
#if defined(AES)
#define LL_AHB2_GRP1_PERIPH_AES RCC_AHB2ENR_AESEN
#endif /* AES */
#define LL_AHB2_GRP1_PERIPH_RNG RCC_AHB2ENR_RNGEN
/**
* @}
*/
/** @defgroup BUS_LL_EC_AHB3_GRP1_PERIPH AHB3 GRP1 PERIPH
* @{
*/
#define LL_AHB3_GRP1_PERIPH_ALL 0xFFFFFFFFU
#if defined(FMC_Bank1_R)
#define LL_AHB3_GRP1_PERIPH_FMC RCC_AHB3ENR_FMCEN
#endif /* FMC_Bank1_R */
#if defined(QUADSPI)
#define LL_AHB3_GRP1_PERIPH_QSPI RCC_AHB3ENR_QSPIEN
#endif /* QUADSPI */
/**
* @}
*/
/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH
* @{
*/
#define LL_APB1_GRP1_PERIPH_ALL 0xFFFFFFFFU
#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR1_TIM2EN
#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR1_TIM3EN
#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1ENR1_TIM4EN
#if defined(TIM5)
#define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1ENR1_TIM5EN
#endif /* TIM5 */
#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR1_TIM6EN
#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR1_TIM7EN
#define LL_APB1_GRP1_PERIPH_CRS RCC_APB1ENR1_CRSEN
#define LL_APB1_GRP1_PERIPH_RTCAPB RCC_APB1ENR1_RTCAPBEN
#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR1_WWDGEN
#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR1_SPI2EN
#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1ENR1_SPI3EN
#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR1_USART2EN
#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR1_USART3EN
#if defined(UART4)
#define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1ENR1_UART4EN
#endif /* UART4 */
#if defined(UART5)
#define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1ENR1_UART5EN
#endif /* UART5 */
#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR1_I2C1EN
#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR1_I2C2EN
#define LL_APB1_GRP1_PERIPH_USB RCC_APB1ENR1_USBEN
#if defined(FDCAN1)
#define LL_APB1_GRP1_PERIPH_FDCAN RCC_APB1ENR1_FDCANEN
#endif /* FDCAN1 */
#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR1_PWREN
#define LL_APB1_GRP1_PERIPH_I2C3 RCC_APB1ENR1_I2C3EN
#define LL_APB1_GRP1_PERIPH_LPTIM1 RCC_APB1ENR1_LPTIM1EN
/**
* @}
*/
/** @defgroup BUS_LL_EC_APB1_GRP2_PERIPH APB1 GRP2 PERIPH
* @{
*/
#define LL_APB1_GRP2_PERIPH_ALL 0xFFFFFFFFU
#define LL_APB1_GRP2_PERIPH_LPUART1 RCC_APB1ENR2_LPUART1EN
#if defined(I2C4)
#define LL_APB1_GRP2_PERIPH_I2C4 RCC_APB1ENR2_I2C4EN
#endif /* I2C4 */
#define LL_APB1_GRP2_PERIPH_UCPD1 RCC_APB1ENR2_UCPD1EN
/**
* @}
*/
/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH
* @{
*/
#define LL_APB2_GRP1_PERIPH_ALL 0xFFFFFFFFU
#define LL_APB2_GRP1_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN
#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN
#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN
#define LL_APB2_GRP1_PERIPH_TIM8 RCC_APB2ENR_TIM8EN
#define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN
#if defined(SPI4)
#define LL_APB2_GRP1_PERIPH_SPI4 RCC_APB2ENR_SPI4EN
#endif /* SPI4 */
#define LL_APB2_GRP1_PERIPH_TIM15 RCC_APB2ENR_TIM15EN
#define LL_APB2_GRP1_PERIPH_TIM16 RCC_APB2ENR_TIM16EN
#define LL_APB2_GRP1_PERIPH_TIM17 RCC_APB2ENR_TIM17EN
#if defined(TIM20)
#define LL_APB2_GRP1_PERIPH_TIM20 RCC_APB2ENR_TIM20EN
#endif /* TIM20 */
#define LL_APB2_GRP1_PERIPH_SAI1 RCC_APB2ENR_SAI1EN
#if defined(HRTIM1)
#define LL_APB2_GRP1_PERIPH_HRTIM1 RCC_APB2ENR_HRTIM1EN
#endif /* HRTIM1 */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions
* @{
*/
/** @defgroup BUS_LL_EF_AHB1 AHB1
* @{
*/
/**
* @brief Enable AHB1 peripherals clock.
* @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_EnableClock\n
* AHB1ENR DMA2EN LL_AHB1_GRP1_EnableClock\n
* AHB1ENR DMAMMUXEN LL_AHB1_GRP1_EnableClock\n
* AHB1ENR CORDICEN LL_AHB1_GRP1_EnableClock\n
* AHB1ENR FMACEN LL_AHB1_GRP1_EnableClock\n
* AHB1ENR FLASHEN LL_AHB1_GRP1_EnableClock\n
* AHB1ENR CRCEN LL_AHB1_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1
* @arg @ref LL_AHB1_GRP1_PERIPH_CORDIC
* @arg @ref LL_AHB1_GRP1_PERIPH_FMAC
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB1ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB1ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if AHB1 peripheral clock is enabled or not
* @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR DMAMUXEN LL_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR CORDICEN LL_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR FMACEN LL_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR FLASHEN LL_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR CRCEN LL_AHB1_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1
* @arg @ref LL_AHB1_GRP1_PERIPH_CORDIC
* @arg @ref LL_AHB1_GRP1_PERIPH_FMAC
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC->AHB1ENR, Periphs) == Periphs) ? 1UL : 0UL);
}
/**
* @brief Disable AHB1 peripherals clock.
* @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_DisableClock\n
* AHB1ENR DMA2EN LL_AHB1_GRP1_DisableClock\n
* AHB1ENR DMAMUXEN LL_AHB1_GRP1_DisableClock\n
* AHB1ENR CORDICEN LL_AHB1_GRP1_DisableClock\n
* AHB1ENR FMACEN LL_AHB1_GRP1_DisableClock\n
* AHB1ENR FLASHEN LL_AHB1_GRP1_DisableClock\n
* AHB1ENR CRCEN LL_AHB1_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1
* @arg @ref LL_AHB1_GRP1_PERIPH_CORDIC
* @arg @ref LL_AHB1_GRP1_PERIPH_FMAC
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB1ENR, Periphs);
}
/**
* @brief Force AHB1 peripherals reset.
* @rmtoll AHB1RSTR DMA1RST LL_AHB1_GRP1_ForceReset\n
* AHB1RSTR DMA2RST LL_AHB1_GRP1_ForceReset\n
* AHB1RSTR DMAMUXRST LL_AHB1_GRP1_ForceReset\n
* AHB1RSTR CORDICRST LL_AHB1_GRP1_ForceReset\n
* AHB1RSTR FMACRST LL_AHB1_GRP1_ForceReset\n
* AHB1RSTR FLASHRST LL_AHB1_GRP1_ForceReset\n
* AHB1RSTR CRCRST LL_AHB1_GRP1_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_ALL
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1
* @arg @ref LL_AHB1_GRP1_PERIPH_CORDIC
* @arg @ref LL_AHB1_GRP1_PERIPH_FMAC
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->AHB1RSTR, Periphs);
}
/**
* @brief Release AHB1 peripherals reset.
* @rmtoll AHB1RSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n
* AHB1RSTR DMA2RST LL_AHB1_GRP1_ReleaseReset\n
* AHB1RSTR DMAMUXRST LL_AHB1_GRP1_ReleaseReset\n
* AHB1RSTR CORDICRST LL_AHB1_GRP1_ReleaseReset\n
* AHB1RSTR FMACRST LL_AHB1_GRP1_ReleaseReset\n
* AHB1RSTR FLASHRST LL_AHB1_GRP1_ReleaseReset\n
* AHB1RSTR CRCRST LL_AHB1_GRP1_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_ALL
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1
* @arg @ref LL_AHB1_GRP1_PERIPH_CORDIC
* @arg @ref LL_AHB1_GRP1_PERIPH_FMAC
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB1RSTR, Periphs);
}
/**
* @brief Enable AHB1 peripheral clocks in Sleep and Stop modes
* @rmtoll AHB1SMENR DMA1SMEN LL_AHB1_GRP1_EnableClockStopSleep\n
* AHB1SMENR DMA2SMEN LL_AHB1_GRP1_EnableClockStopSleep\n
* AHB1SMENR DMAMUXSMEN LL_AHB1_GRP1_EnableClockStopSleep\n
* AHB1SMENR CORDICSMEN LL_AHB1_GRP1_EnableClockStopSleep\n
* AHB1SMENR FMACSMEN LL_AHB1_GRP1_EnableClockStopSleep\n
* AHB1SMENR FLASHSMEN LL_AHB1_GRP1_EnableClockStopSleep\n
* AHB1SMENR SRAM1SMEN LL_AHB1_GRP1_DisableClockStopSleep\n
* AHB1SMENR CRCSMEN LL_AHB1_GRP1_EnableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1
* @arg @ref LL_AHB1_GRP1_PERIPH_CORDIC
* @arg @ref LL_AHB1_GRP1_PERIPH_FMAC
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_EnableClockStopSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB1SMENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB1SMENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable AHB1 peripheral clocks in Sleep and Stop modes
* @rmtoll AHB1SMENR DMA1SMEN LL_AHB1_GRP1_DisableClockStopSleep\n
* AHB1SMENR DMA2SMEN LL_AHB1_GRP1_DisableClockStopSleep\n
* AHB1SMENR DMAMUXSMEN LL_AHB1_GRP1_DisableClockStopSleep\n
* AHB1SMENR CORDICSMEN LL_AHB1_GRP1_DisableClockStopSleep\n
* AHB1SMENR FMACSMEN LL_AHB1_GRP1_DisableClockStopSleep\n
* AHB1SMENR FLASHSMEN LL_AHB1_GRP1_DisableClockStopSleep\n
* AHB1SMENR SRAM1SMEN LL_AHB1_GRP1_DisableClockStopSleep\n
* AHB1SMENR CRCSMEN LL_AHB1_GRP1_DisableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1
* @arg @ref LL_AHB1_GRP1_PERIPH_CORDIC
* @arg @ref LL_AHB1_GRP1_PERIPH_FMAC
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_DisableClockStopSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB1SMENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_AHB2 AHB2
* @{
*/
/**
* @brief Enable AHB2 peripherals clock.
* @rmtoll AHB2ENR GPIOAEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR GPIOBEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR GPIOCEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR GPIODEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR GPIOEEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR GPIOFEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR GPIOGEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR ADC12EN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR ADC345EN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR DAC1EN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR DAC2EN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR DAC3EN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR DAC4EN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR AESEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR RNGEN LL_AHB2_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB2_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB2_GRP1_PERIPH_ADC345 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC1
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC2 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC3
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC4 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB2ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB2ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if AHB2 peripheral clock is enabled or not
* @rmtoll AHB2ENR GPIOAEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR GPIOBEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR GPIOCEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR GPIODEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR GPIOEEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR GPIOFEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR GPIOGEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR ADC12EN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR ADC345EN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR DAC1EN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR DAC2EN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR DAC3EN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR DAC4EN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR AESEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR RNGEN LL_AHB2_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB2_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB2_GRP1_PERIPH_ADC345 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC1
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC2 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC3
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC4 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
*
* (*) value not defined in all devices.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC->AHB2ENR, Periphs) == Periphs) ? 1UL : 0UL);
}
/**
* @brief Disable AHB2 peripherals clock.
* @rmtoll AHB2ENR GPIOAEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR GPIOBEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR GPIOCEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR GPIODEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR GPIOEEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR GPIOFEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR GPIOGEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR ADC12EN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR ADC345EN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR DAC1EN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR DAC2EN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR DAC3EN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR DAC4EN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR AESEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR RNGEN LL_AHB2_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB2_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB2_GRP1_PERIPH_ADC345 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC1
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC2 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC3
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC4 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB2ENR, Periphs);
}
/**
* @brief Force AHB2 peripherals reset.
* @rmtoll AHB2RSTR GPIOARST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR GPIOBRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR GPIOCRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR GPIODRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR GPIOERST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR GPIOFRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR GPIOGRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR ADC12RST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR ADC345RST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR DAC1RST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR DAC2RST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR DAC3RST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR DAC4RST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR AESRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR RNGRST LL_AHB2_GRP1_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB2_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB2_GRP1_PERIPH_ADC345 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC1
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC2 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC3
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC4 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->AHB2RSTR, Periphs);
}
/**
* @brief Release AHB2 peripherals reset.
* @rmtoll AHB2RSTR GPIOARST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR GPIOBRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR GPIOCRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR GPIODRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR GPIOERST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR GPIOFRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR GPIOGRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR ADC12RST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR ADC345RST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR DAC1RST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR DAC2RST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR DAC3RST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR DAC4RST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR AESRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR RNGRST LL_AHB2_GRP1_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB2_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB2_GRP1_PERIPH_ADC345 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC1
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC2 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC3
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC4 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB2RSTR, Periphs);
}
/**
* @brief Enable AHB2 peripheral clocks in Sleep and Stop modes
* @rmtoll AHB2SMENR GPIOASMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR GPIOBSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR GPIOCSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR GPIODSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR GPIOESMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR GPIOFSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR GPIOGSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR SRAM2SMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR CCMSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR ADC12SMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR ADC345SMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR DAC1SMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR DAC2SMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR DAC3SMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR DAC4SMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR AESSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR RNGSMEN LL_AHB2_GRP1_EnableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB2_GRP1_PERIPH_SRAM2
* @arg @ref LL_AHB2_GRP1_PERIPH_CCM
* @arg @ref LL_AHB2_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB2_GRP1_PERIPH_ADC345 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC1
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC2 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC3
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC4 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_EnableClockStopSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB2SMENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB2SMENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable AHB2 peripheral clocks in Sleep and Stop modes
* @rmtoll AHB2SMENR GPIOASMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR GPIOBSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR GPIOCSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR GPIODSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR GPIOESMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR GPIOFSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR GPIOGSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR SRAM2SMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR CCMSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR ADC12SMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR ADC345SMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR DAC1SMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR DAC2SMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR DAC3SMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR DAC4SMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR AESSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR RNGSMEN LL_AHB2_GRP1_DisableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG
* @arg @ref LL_AHB2_GRP1_PERIPH_SRAM2
* @arg @ref LL_AHB2_GRP1_PERIPH_CCM
* @arg @ref LL_AHB2_GRP1_PERIPH_ADC12
* @arg @ref LL_AHB2_GRP1_PERIPH_ADC345 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC1
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC2 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC3
* @arg @ref LL_AHB2_GRP1_PERIPH_DAC4 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_DisableClockStopSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB2SMENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_AHB3 AHB3
* @{
*/
/**
* @brief Enable AHB3 peripherals clock.
* @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_EnableClock\n
* AHB3ENR QSPIEN LL_AHB3_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB3ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB3ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if AHB3 peripheral clock is enabled or not
* @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR QSPIEN LL_AHB3_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
*
* (*) value not defined in all devices.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_AHB3_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC->AHB3ENR, Periphs) == Periphs) ? 1UL : 0UL);
}
/**
* @brief Disable AHB3 peripherals clock.
* @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_DisableClock\n
* AHB3ENR QSPIEN LL_AHB3_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB3ENR, Periphs);
}
/**
* @brief Force AHB3 peripherals reset.
* @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ForceReset\n
* AHB3RSTR QSPIRST LL_AHB3_GRP1_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_ALL
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->AHB3RSTR, Periphs);
}
/**
* @brief Release AHB3 peripherals reset.
* @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ReleaseReset\n
* AHB3RSTR QSPIRST LL_AHB3_GRP1_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_ALL
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB3RSTR, Periphs);
}
/**
* @brief Enable AHB3 peripheral clocks in Sleep and Stop modes
* @rmtoll AHB3SMENR FMCSMEN LL_AHB3_GRP1_EnableClockStopSleep\n
* AHB3SMENR QSPISMEN LL_AHB3_GRP1_EnableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_EnableClockStopSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB3SMENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB3SMENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable AHB3 peripheral clocks in Sleep and Stop modes
* @rmtoll AHB3SMENR FMCSMEN LL_AHB3_GRP1_DisableClockStopSleep\n
* AHB3SMENR QSPISMEN LL_AHB3_GRP1_DisableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_DisableClockStopSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB3SMENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB1 APB1
* @{
*/
/**
* @brief Enable APB1 peripherals clock.
* @rmtoll APB1ENR1 TIM2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 TIM3EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 TIM4EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 TIM5EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 TIM6EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 TIM7EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 CRSEN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 RTCAPBEN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 WWDGEN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 SPI2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 SPI3EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 USART2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 USART3EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 UART4EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 UART5EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 I2C1EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 I2C2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 USBEN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 FDCANEN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 PWREN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 I2C3EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 LPTIM1EN LL_APB1_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_CRS
* @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_USB
* @arg @ref LL_APB1_GRP1_PERIPH_FDCAN (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB1ENR1, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB1ENR1, Periphs);
(void)tmpreg;
}
/**
* @brief Enable APB1 peripherals clock.
* @rmtoll APB1ENR2 LPUART1EN LL_APB1_GRP2_EnableClock\n
* APB1ENR2 I2C4EN LL_APB1_GRP2_EnableClock\n
* APB1ENR2 UCPD1EN LL_APB1_GRP2_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
* @arg @ref LL_APB1_GRP2_PERIPH_I2C4 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_UCPD1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB1ENR2, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB1ENR2, Periphs);
(void)tmpreg;
}
/**
* @brief Check if APB1 peripheral clock is enabled or not
* @rmtoll APB1ENR1 TIM2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 TIM3EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 TIM4EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 TIM5EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 TIM6EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 TIM7EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 CRSEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 RTCAPBEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 WWDGEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 SPI2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 SPI3EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 USART2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 USART3EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 UART4EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 UART5EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 I2C1EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 I2C2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 USBEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 FDCANEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 PWREN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 I2C3EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 LPTIM1EN LL_APB1_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_CRS
* @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_USB
* @arg @ref LL_APB1_GRP1_PERIPH_FDCAN (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
*
* (*) value not defined in all devices.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC->APB1ENR1, Periphs) == Periphs) ? 1UL : 0UL);
}
/**
* @brief Check if APB1 peripheral clock is enabled or not
* @rmtoll APB1ENR2 LPUART1EN LL_APB1_GRP2_IsEnabledClock\n
* APB1ENR2 I2C4EN LL_APB1_GRP2_IsEnabledClock\n
* APB1ENR2 UCPD1EN LL_APB1_GRP2_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
* @arg @ref LL_APB1_GRP2_PERIPH_I2C4 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_UCPD1
*
* (*) value not defined in all devices.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_APB1_GRP2_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC->APB1ENR2, Periphs) == Periphs) ? 1UL : 0UL);
}
/**
* @brief Disable APB1 peripherals clock.
* @rmtoll APB1ENR1 TIM2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 TIM3EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 TIM4EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 TIM5EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 TIM6EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 TIM7EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 CRSEN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 RTCAPBEN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 WWDGEN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 SPI2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 SPI3EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 USART2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 USART3EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 UART4EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 UART5EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 I2C1EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 I2C2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 USBEN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 FDCANEN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 PWREN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 I2C3EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 LPTIM1EN LL_APB1_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_CRS
* @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_USB
* @arg @ref LL_APB1_GRP1_PERIPH_FDCAN (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1ENR1, Periphs);
}
/**
* @brief Disable APB1 peripherals clock.
* @rmtoll APB1ENR2 LPUART1EN LL_APB1_GRP2_DisableClock\n
* APB1ENR2 I2C4EN LL_APB1_GRP2_DisableClock\n
* APB1ENR2 UCPD1EN LL_APB1_GRP2_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
* @arg @ref LL_APB1_GRP2_PERIPH_I2C4 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_UCPD1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1ENR2, Periphs);
}
/**
* @brief Force APB1 peripherals reset.
* @rmtoll APB1RSTR1 TIM2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 TIM3RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 TIM4RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 TIM5RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 TIM6RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 TIM7RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 CRSRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 SPI2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 SPI3RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 USART2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 USART3RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 UART4RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 UART5RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 I2C1RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 I2C2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 USBRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 FDCANRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 PWRRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 I2C3RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 LPTIM1RST LL_APB1_GRP1_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_CRS
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_USB
* @arg @ref LL_APB1_GRP1_PERIPH_FDCAN (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->APB1RSTR1, Periphs);
}
/**
* @brief Force APB1 peripherals reset.
* @rmtoll APB1RSTR2 LPUART1RST LL_APB1_GRP2_ForceReset\n
* APB1RSTR2 I2C4RST LL_APB1_GRP2_ForceReset\n
* APB1RSTR2 UCPD1RST LL_APB1_GRP2_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
* @arg @ref LL_APB1_GRP2_PERIPH_I2C4 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_UCPD1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->APB1RSTR2, Periphs);
}
/**
* @brief Release APB1 peripherals reset.
* @rmtoll APB1RSTR1 TIM2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 TIM3RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 TIM4RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 TIM5RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 TIM6RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 TIM7RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 CRSRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 SPI2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 SPI3RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 USART2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 USART3RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 UART4RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 UART5RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 I2C1RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 I2C2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 USBRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 FDCANRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 PWRRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 I2C3RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 LPTIM1RST LL_APB1_GRP1_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_CRS
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_USB
* @arg @ref LL_APB1_GRP1_PERIPH_FDCAN (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1RSTR1, Periphs);
}
/**
* @brief Release APB1 peripherals reset.
* @rmtoll APB1RSTR2 LPUART1RST LL_APB1_GRP2_ReleaseReset\n
* APB1RSTR2 I2C4RST LL_APB1_GRP2_ReleaseReset\n
* APB1RSTR2 UCPD1RST LL_APB1_GRP2_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
* @arg @ref LL_APB1_GRP2_PERIPH_I2C4 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_UCPD1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1RSTR2, Periphs);
}
/**
* @brief Enable APB1 peripheral clocks in Sleep and Stop modes
* @rmtoll APB1SMENR1 TIM2SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 TIM3SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 TIM4SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 TIM5SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 TIM6SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 TIM7SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 CRSSMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 RTCAPBSMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 WWDGSMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 SPI2SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 SPI3SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 USART2SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 USART3SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 UART4SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 UART5SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 I2C1SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 I2C2SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 USBSMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 FDCANSMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 PWRSMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 I2C3SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 LPTIM1SMEN LL_APB1_GRP1_EnableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_CRS
* @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_USB
* @arg @ref LL_APB1_GRP1_PERIPH_FDCAN (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_EnableClockStopSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB1SMENR1, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB1SMENR1, Periphs);
(void)tmpreg;
}
/**
* @brief Enable APB1 peripheral clocks in Sleep and Stop modes
* @rmtoll APB1SMENR2 LPUART1SMEN LL_APB1_GRP2_EnableClockStopSleep\n
* APB1SMENR2 I2C4SMEN LL_APB1_GRP2_EnableClockStopSleep\n
* APB1SMENR2 UCPD1SMEN LL_APB1_GRP2_EnableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
* @arg @ref LL_APB1_GRP2_PERIPH_I2C4 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_UCPD1 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_EnableClockStopSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB1SMENR2, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB1SMENR2, Periphs);
(void)tmpreg;
}
/**
* @brief Disable APB1 peripheral clocks in Sleep and Stop modes
* @rmtoll APB1SMENR1 TIM2SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 TIM3SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 TIM4SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 TIM5SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 TIM6SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 TIM7SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 CRSSMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 RTCAPBSMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 WWDGSMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 SPI2SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 SPI3SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 USART2SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 USART3SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 UART4SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 UART5SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 I2C1SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 I2C2SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 USBSMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 FDCANSMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 PWRSMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 I2C3SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 LPTIM1SMEN LL_APB1_GRP1_DisableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_CRS
* @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_USB
* @arg @ref LL_APB1_GRP1_PERIPH_FDCAN (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_DisableClockStopSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1SMENR1, Periphs);
}
/**
* @brief Disable APB1 peripheral clocks in Sleep and Stop modes
* @rmtoll APB1SMENR2 LPUART1SMEN LL_APB1_GRP2_DisableClockStopSleep\n
* APB1SMENR2 I2C4SMEN LL_APB1_GRP2_DisableClockStopSleep\n
* APB1SMENR2 UCPD1SMEN LL_APB1_GRP2_DisableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
* @arg @ref LL_APB1_GRP2_PERIPH_I2C4 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_UCPD1 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_DisableClockStopSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1SMENR2, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB2 APB2
* @{
*/
/**
* @brief Enable APB2 peripherals clock.
* @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n
* APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM8EN LL_APB2_GRP1_EnableClock\n
* APB2ENR USART1EN LL_APB2_GRP1_EnableClock\n
* APB2ENR SPI4EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM15EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM16EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM17EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM20EN LL_APB2_GRP1_EnableClock\n
* APB2ENR SAI1EN LL_APB2_GRP1_EnableClock\n
* APB2ENR HRTIM1EN LL_APB2_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_TIM20 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM1 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB2ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB2ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if APB2 peripheral clock is enabled or not
* @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM8EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR SPI4EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM15EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM16EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM17EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM20EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR SAI1EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR HRTIM1EN LL_APB2_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_TIM20 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM1 (*)
*
* (*) value not defined in all devices.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC->APB2ENR, Periphs) == Periphs) ? 1UL : 0UL);
}
/**
* @brief Disable APB2 peripherals clock.
* @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n
* APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM8EN LL_APB2_GRP1_DisableClock\n
* APB2ENR USART1EN LL_APB2_GRP1_DisableClock\n
* APB2ENR SPI4EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM15EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM16EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM17EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM20EN LL_APB2_GRP1_DisableClock\n
* APB2ENR SAI1EN LL_APB2_GRP1_DisableClock\n
* APB2ENR HRTIM1EN LL_APB2_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_TIM20 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM1 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB2ENR, Periphs);
}
/**
* @brief Force APB2 peripherals reset.
* @rmtoll APB2RSTR SYSCFGRST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM8RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR SPI4RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM15RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM16RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM17RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM20RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR SAI1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR HRTIM1RST LL_APB2_GRP1_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_TIM20 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM1 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->APB2RSTR, Periphs);
}
/**
* @brief Release APB2 peripherals reset.
* @rmtoll APB2RSTR SYSCFGRST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM8RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR SPI4RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM15RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM16RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM17RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM20RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR SAI1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR HRTIM1RST LL_APB2_GRP1_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_TIM20 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM1 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB2RSTR, Periphs);
}
/**
* @brief Enable APB2 peripheral clocks in Sleep and Stop modes
* @rmtoll APB2SMENR SYSCFGSMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR TIM1SMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR SPI1SMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR TIM8SMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR USART1SMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR SPI4SMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR TIM15SMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR TIM16SMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR TIM17SMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR TIM20SMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR SAI1SMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR HRTIM1SMEN LL_APB2_GRP1_EnableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_TIM20 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM1 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_EnableClockStopSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB2SMENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB2SMENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable APB2 peripheral clocks in Sleep and Stop modes
* @rmtoll APB2SMENR SYSCFGSMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR TIM1SMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR SPI1SMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR TIM8SMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR USART1SMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR SPI4SMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR TIM15SMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR TIM16SMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR TIM17SMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR TIM20SMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR SAI1SMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR HRTIM1SMEN LL_APB2_GRP1_DisableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17
* @arg @ref LL_APB2_GRP1_PERIPH_TIM20 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_HRTIM1 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_DisableClockStopSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB2SMENR, Periphs);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined(RCC) */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32G4xx_LL_BUS_H */