1423 lines
53 KiB
C
1423 lines
53 KiB
C
|
/**
|
||
|
|
******************************************************************************
|
||
|
|
* @file stm32g4xx_ll_exti.h
|
||
|
|
* @author MCD Application Team
|
||
|
|
* @brief Header file of EXTI LL module.
|
||
|
|
******************************************************************************
|
||
|
|
* @attention
|
||
|
|
*
|
||
|
|
* Copyright (c) 2019 STMicroelectronics.
|
||
|
|
* All rights reserved.
|
||
|
|
*
|
||
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
||
|
|
* in the root directory of this software component.
|
||
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||
|
|
*
|
||
|
|
******************************************************************************
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||
|
|
#ifndef __STM32G4xx_LL_EXTI_H
|
||
|
|
#define __STM32G4xx_LL_EXTI_H
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
extern "C" {
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* Includes ------------------------------------------------------------------*/
|
||
|
|
#include "stm32g4xx.h"
|
||
|
|
|
||
|
|
/** @addtogroup STM32G4xx_LL_Driver
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
#if defined (EXTI)
|
||
|
|
|
||
|
|
/** @defgroup EXTI_LL EXTI
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Private types -------------------------------------------------------------*/
|
||
|
|
/* Private variables ---------------------------------------------------------*/
|
||
|
|
/* Private constants ---------------------------------------------------------*/
|
||
|
|
/* Private Macros ------------------------------------------------------------*/
|
||
|
|
#if defined(USE_FULL_LL_DRIVER)
|
||
|
|
/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
#endif /*USE_FULL_LL_DRIVER*/
|
||
|
|
/* Exported types ------------------------------------------------------------*/
|
||
|
|
#if defined(USE_FULL_LL_DRIVER)
|
||
|
|
/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
typedef struct
|
||
|
|
{
|
||
|
|
|
||
|
|
uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31
|
||
|
|
This parameter can be any combination of @ref EXTI_LL_EC_LINE */
|
||
|
|
|
||
|
|
uint32_t Line_32_63; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 32 to 63
|
||
|
|
This parameter can be any combination of @ref EXTI_LL_EC_LINE */
|
||
|
|
|
||
|
|
FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines.
|
||
|
|
This parameter can be set either to ENABLE or DISABLE */
|
||
|
|
|
||
|
|
uint8_t Mode; /*!< Specifies the mode for the EXTI lines.
|
||
|
|
This parameter can be a value of @ref EXTI_LL_EC_MODE. */
|
||
|
|
|
||
|
|
uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
|
||
|
|
This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */
|
||
|
|
} LL_EXTI_InitTypeDef;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
#endif /*USE_FULL_LL_DRIVER*/
|
||
|
|
|
||
|
|
/* Exported constants --------------------------------------------------------*/
|
||
|
|
/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup EXTI_LL_EC_LINE LINE
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define LL_EXTI_LINE_0 EXTI_IMR1_IM0 /*!< Extended line 0 */
|
||
|
|
#define LL_EXTI_LINE_1 EXTI_IMR1_IM1 /*!< Extended line 1 */
|
||
|
|
#define LL_EXTI_LINE_2 EXTI_IMR1_IM2 /*!< Extended line 2 */
|
||
|
|
#define LL_EXTI_LINE_3 EXTI_IMR1_IM3 /*!< Extended line 3 */
|
||
|
|
#define LL_EXTI_LINE_4 EXTI_IMR1_IM4 /*!< Extended line 4 */
|
||
|
|
#define LL_EXTI_LINE_5 EXTI_IMR1_IM5 /*!< Extended line 5 */
|
||
|
|
#define LL_EXTI_LINE_6 EXTI_IMR1_IM6 /*!< Extended line 6 */
|
||
|
|
#define LL_EXTI_LINE_7 EXTI_IMR1_IM7 /*!< Extended line 7 */
|
||
|
|
#define LL_EXTI_LINE_8 EXTI_IMR1_IM8 /*!< Extended line 8 */
|
||
|
|
#define LL_EXTI_LINE_9 EXTI_IMR1_IM9 /*!< Extended line 9 */
|
||
|
|
#define LL_EXTI_LINE_10 EXTI_IMR1_IM10 /*!< Extended line 10 */
|
||
|
|
#define LL_EXTI_LINE_11 EXTI_IMR1_IM11 /*!< Extended line 11 */
|
||
|
|
#define LL_EXTI_LINE_12 EXTI_IMR1_IM12 /*!< Extended line 12 */
|
||
|
|
#define LL_EXTI_LINE_13 EXTI_IMR1_IM13 /*!< Extended line 13 */
|
||
|
|
#define LL_EXTI_LINE_14 EXTI_IMR1_IM14 /*!< Extended line 14 */
|
||
|
|
#define LL_EXTI_LINE_15 EXTI_IMR1_IM15 /*!< Extended line 15 */
|
||
|
|
#if defined(EXTI_IMR1_IM16)
|
||
|
|
#define LL_EXTI_LINE_16 EXTI_IMR1_IM16 /*!< Extended line 16 */
|
||
|
|
#endif /* EXTI_IMR1_IM16 */
|
||
|
|
#define LL_EXTI_LINE_17 EXTI_IMR1_IM17 /*!< Extended line 17 */
|
||
|
|
#if defined(EXTI_IMR1_IM18)
|
||
|
|
#define LL_EXTI_LINE_18 EXTI_IMR1_IM18 /*!< Extended line 18 */
|
||
|
|
#endif /* EXTI_IMR1_IM18 */
|
||
|
|
#define LL_EXTI_LINE_19 EXTI_IMR1_IM19 /*!< Extended line 19 */
|
||
|
|
#if defined(EXTI_IMR1_IM20)
|
||
|
|
#define LL_EXTI_LINE_20 EXTI_IMR1_IM20 /*!< Extended line 20 */
|
||
|
|
#endif /* EXTI_IMR1_IM20 */
|
||
|
|
#if defined(EXTI_IMR1_IM21)
|
||
|
|
#define LL_EXTI_LINE_21 EXTI_IMR1_IM21 /*!< Extended line 21 */
|
||
|
|
#endif /* EXTI_IMR1_IM21 */
|
||
|
|
#if defined(EXTI_IMR1_IM22)
|
||
|
|
#define LL_EXTI_LINE_22 EXTI_IMR1_IM22 /*!< Extended line 22 */
|
||
|
|
#endif /* EXTI_IMR1_IM22 */
|
||
|
|
#define LL_EXTI_LINE_23 EXTI_IMR1_IM23 /*!< Extended line 23 */
|
||
|
|
#if defined(EXTI_IMR1_IM24)
|
||
|
|
#define LL_EXTI_LINE_24 EXTI_IMR1_IM24 /*!< Extended line 24 */
|
||
|
|
#endif /* EXTI_IMR1_IM24 */
|
||
|
|
#if defined(EXTI_IMR1_IM25)
|
||
|
|
#define LL_EXTI_LINE_25 EXTI_IMR1_IM25 /*!< Extended line 25 */
|
||
|
|
#endif /* EXTI_IMR1_IM25 */
|
||
|
|
#if defined(EXTI_IMR1_IM26)
|
||
|
|
#define LL_EXTI_LINE_26 EXTI_IMR1_IM26 /*!< Extended line 26 */
|
||
|
|
#endif /* EXTI_IMR1_IM26 */
|
||
|
|
#if defined(EXTI_IMR1_IM27)
|
||
|
|
#define LL_EXTI_LINE_27 EXTI_IMR1_IM27 /*!< Extended line 27 */
|
||
|
|
#endif /* EXTI_IMR1_IM27 */
|
||
|
|
#if defined(EXTI_IMR1_IM28)
|
||
|
|
#define LL_EXTI_LINE_28 EXTI_IMR1_IM28 /*!< Extended line 28 */
|
||
|
|
#endif /* EXTI_IMR1_IM28 */
|
||
|
|
#if defined(EXTI_IMR1_IM29)
|
||
|
|
#define LL_EXTI_LINE_29 EXTI_IMR1_IM29 /*!< Extended line 29 */
|
||
|
|
#endif /* EXTI_IMR1_IM29 */
|
||
|
|
#if defined(EXTI_IMR1_IM30)
|
||
|
|
#define LL_EXTI_LINE_30 EXTI_IMR1_IM30 /*!< Extended line 30 */
|
||
|
|
#endif /* EXTI_IMR1_IM30 */
|
||
|
|
#if defined(EXTI_IMR1_IM31)
|
||
|
|
#define LL_EXTI_LINE_31 EXTI_IMR1_IM31 /*!< Extended line 31 */
|
||
|
|
#endif /* EXTI_IMR1_IM31 */
|
||
|
|
#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR1_IM /*!< All Extended line not reserved*/
|
||
|
|
|
||
|
|
#if defined(EXTI_IMR2_IM32)
|
||
|
|
#define LL_EXTI_LINE_32 EXTI_IMR2_IM32 /*!< Extended line 32 */
|
||
|
|
#endif /* EXTI_IMR2_IM32 */
|
||
|
|
#if defined(EXTI_IMR2_IM33)
|
||
|
|
#define LL_EXTI_LINE_33 EXTI_IMR2_IM33 /*!< Extended line 33 */
|
||
|
|
#endif /* EXTI_IMR2_IM33 */
|
||
|
|
#if defined(EXTI_IMR2_IM34)
|
||
|
|
#define LL_EXTI_LINE_34 EXTI_IMR2_IM34 /*!< Extended line 34 */
|
||
|
|
#endif /* EXTI_IMR2_IM34 */
|
||
|
|
#if defined(EXTI_IMR2_IM35)
|
||
|
|
#define LL_EXTI_LINE_35 EXTI_IMR2_IM35 /*!< Extended line 35 */
|
||
|
|
#endif /* EXTI_IMR2_IM35 */
|
||
|
|
#if defined(EXTI_IMR2_IM36)
|
||
|
|
#define LL_EXTI_LINE_36 EXTI_IMR2_IM36 /*!< Extended line 36 */
|
||
|
|
#endif /* EXTI_IMR2_IM36 */
|
||
|
|
#if defined(EXTI_IMR2_IM37)
|
||
|
|
#define LL_EXTI_LINE_37 EXTI_IMR2_IM37 /*!< Extended line 37 */
|
||
|
|
#endif /* EXTI_IMR2_IM37 */
|
||
|
|
#if defined(EXTI_IMR2_IM38)
|
||
|
|
#define LL_EXTI_LINE_38 EXTI_IMR2_IM38 /*!< Extended line 38 */
|
||
|
|
#endif /* EXTI_IMR2_IM38 */
|
||
|
|
#if defined(EXTI_IMR2_IM39)
|
||
|
|
#define LL_EXTI_LINE_39 EXTI_IMR2_IM39 /*!< Extended line 39 */
|
||
|
|
#endif /* EXTI_IMR2_IM39 */
|
||
|
|
#if defined(EXTI_IMR2_IM40)
|
||
|
|
#define LL_EXTI_LINE_40 EXTI_IMR2_IM40 /*!< Extended line 40 */
|
||
|
|
#endif /* EXTI_IMR2_IM40 */
|
||
|
|
#if defined(EXTI_IMR2_IM41)
|
||
|
|
#define LL_EXTI_LINE_41 EXTI_IMR2_IM41 /*!< Extended line 41 */
|
||
|
|
#endif /* EXTI_IMR2_IM41 */
|
||
|
|
#if defined(EXTI_IMR2_IM42)
|
||
|
|
#define LL_EXTI_LINE_42 EXTI_IMR2_IM42 /*!< Extended line 42 */
|
||
|
|
#endif /* EXTI_IMR2_IM42 */
|
||
|
|
#define LL_EXTI_LINE_ALL_32_63 EXTI_IMR2_IM /*!< All Extended line not reserved*/
|
||
|
|
|
||
|
|
|
||
|
|
#define LL_EXTI_LINE_ALL (0xFFFFFFFFU) /*!< All Extended line */
|
||
|
|
|
||
|
|
#if defined(USE_FULL_LL_DRIVER)
|
||
|
|
#define LL_EXTI_LINE_NONE 0x00000000U /*!< None Extended line */
|
||
|
|
#endif /*USE_FULL_LL_DRIVER*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
#if defined(USE_FULL_LL_DRIVER)
|
||
|
|
|
||
|
|
/** @defgroup EXTI_LL_EC_MODE Mode
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */
|
||
|
|
#define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */
|
||
|
|
#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */
|
||
|
|
#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */
|
||
|
|
#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */
|
||
|
|
#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
#endif /*USE_FULL_LL_DRIVER*/
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported macro ------------------------------------------------------------*/
|
||
|
|
/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Write a value in EXTI register
|
||
|
|
* @param __REG__ Register to be written
|
||
|
|
* @param __VALUE__ Value to be written in the register
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Read a value in EXTI register
|
||
|
|
* @param __REG__ Register to be read
|
||
|
|
* @retval Register value
|
||
|
|
*/
|
||
|
|
#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__)
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
/* Exported functions --------------------------------------------------------*/
|
||
|
|
/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/** @defgroup EXTI_LL_EF_IT_Management IT_Management
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31
|
||
|
|
* @note The reset value for the direct or internal lines (see RM)
|
||
|
|
* is set to 1 in order to enable the interrupt by default.
|
||
|
|
* Bits are set automatically at Power on.
|
||
|
|
* @rmtoll IMR1 IMx LL_EXTI_EnableIT_0_31
|
||
|
|
* @param ExtiLine This parameter can be one of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_0
|
||
|
|
* @arg @ref LL_EXTI_LINE_1
|
||
|
|
* @arg @ref LL_EXTI_LINE_2
|
||
|
|
* @arg @ref LL_EXTI_LINE_3
|
||
|
|
* @arg @ref LL_EXTI_LINE_4
|
||
|
|
* @arg @ref LL_EXTI_LINE_5
|
||
|
|
* @arg @ref LL_EXTI_LINE_6
|
||
|
|
* @arg @ref LL_EXTI_LINE_7
|
||
|
|
* @arg @ref LL_EXTI_LINE_8
|
||
|
|
* @arg @ref LL_EXTI_LINE_9
|
||
|
|
* @arg @ref LL_EXTI_LINE_10
|
||
|
|
* @arg @ref LL_EXTI_LINE_11
|
||
|
|
* @arg @ref LL_EXTI_LINE_12
|
||
|
|
* @arg @ref LL_EXTI_LINE_13
|
||
|
|
* @arg @ref LL_EXTI_LINE_14
|
||
|
|
* @arg @ref LL_EXTI_LINE_15
|
||
|
|
* @arg @ref LL_EXTI_LINE_16
|
||
|
|
* @arg @ref LL_EXTI_LINE_17
|
||
|
|
* @arg @ref LL_EXTI_LINE_18
|
||
|
|
* @arg @ref LL_EXTI_LINE_19
|
||
|
|
* @arg @ref LL_EXTI_LINE_20
|
||
|
|
* @arg @ref LL_EXTI_LINE_21
|
||
|
|
* @arg @ref LL_EXTI_LINE_22
|
||
|
|
* @arg @ref LL_EXTI_LINE_23
|
||
|
|
* @arg @ref LL_EXTI_LINE_24
|
||
|
|
* @arg @ref LL_EXTI_LINE_25
|
||
|
|
* @arg @ref LL_EXTI_LINE_26
|
||
|
|
* @arg @ref LL_EXTI_LINE_27
|
||
|
|
* @arg @ref LL_EXTI_LINE_28
|
||
|
|
* @arg @ref LL_EXTI_LINE_29
|
||
|
|
* @arg @ref LL_EXTI_LINE_30
|
||
|
|
* @arg @ref LL_EXTI_LINE_31 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_ALL_0_31
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @note Please check each device line mapping for EXTI Line availability
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
SET_BIT(EXTI->IMR1, ExtiLine);
|
||
|
|
}
|
||
|
|
/**
|
||
|
|
* @brief Enable ExtiLine Interrupt request for Lines in range 32 to 63
|
||
|
|
* @note The reset value for the direct lines (lines from 32 to 34, line
|
||
|
|
* 39) is set to 1 in order to enable the interrupt by default.
|
||
|
|
* Bits are set automatically at Power on.
|
||
|
|
* @rmtoll IMR2 IMx LL_EXTI_EnableIT_32_63
|
||
|
|
* @param ExtiLine This parameter can be one of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_32 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_33 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_34
|
||
|
|
* @arg @ref LL_EXTI_LINE_35 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_36
|
||
|
|
* @arg @ref LL_EXTI_LINE_37
|
||
|
|
* @arg @ref LL_EXTI_LINE_38
|
||
|
|
* @arg @ref LL_EXTI_LINE_39
|
||
|
|
* @arg @ref LL_EXTI_LINE_40
|
||
|
|
* @arg @ref LL_EXTI_LINE_41
|
||
|
|
* @arg @ref LL_EXTI_LINE_42(*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_ALL_32_63
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void LL_EXTI_EnableIT_32_63(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
SET_BIT(EXTI->IMR2, ExtiLine);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31
|
||
|
|
* @note The reset value for the direct or internal lines (see RM)
|
||
|
|
* is set to 1 in order to enable the interrupt by default.
|
||
|
|
* Bits are set automatically at Power on.
|
||
|
|
* @rmtoll IMR1 IMx LL_EXTI_DisableIT_0_31
|
||
|
|
* @param ExtiLine This parameter can be one of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_0
|
||
|
|
* @arg @ref LL_EXTI_LINE_1
|
||
|
|
* @arg @ref LL_EXTI_LINE_2
|
||
|
|
* @arg @ref LL_EXTI_LINE_3
|
||
|
|
* @arg @ref LL_EXTI_LINE_4
|
||
|
|
* @arg @ref LL_EXTI_LINE_5
|
||
|
|
* @arg @ref LL_EXTI_LINE_6
|
||
|
|
* @arg @ref LL_EXTI_LINE_7
|
||
|
|
* @arg @ref LL_EXTI_LINE_8
|
||
|
|
* @arg @ref LL_EXTI_LINE_9
|
||
|
|
* @arg @ref LL_EXTI_LINE_10
|
||
|
|
* @arg @ref LL_EXTI_LINE_11
|
||
|
|
* @arg @ref LL_EXTI_LINE_12
|
||
|
|
* @arg @ref LL_EXTI_LINE_13
|
||
|
|
* @arg @ref LL_EXTI_LINE_14
|
||
|
|
* @arg @ref LL_EXTI_LINE_15
|
||
|
|
* @arg @ref LL_EXTI_LINE_16
|
||
|
|
* @arg @ref LL_EXTI_LINE_17
|
||
|
|
* @arg @ref LL_EXTI_LINE_18
|
||
|
|
* @arg @ref LL_EXTI_LINE_19
|
||
|
|
* @arg @ref LL_EXTI_LINE_20
|
||
|
|
* @arg @ref LL_EXTI_LINE_21
|
||
|
|
* @arg @ref LL_EXTI_LINE_22
|
||
|
|
* @arg @ref LL_EXTI_LINE_23
|
||
|
|
* @arg @ref LL_EXTI_LINE_24
|
||
|
|
* @arg @ref LL_EXTI_LINE_25
|
||
|
|
* @arg @ref LL_EXTI_LINE_26
|
||
|
|
* @arg @ref LL_EXTI_LINE_27
|
||
|
|
* @arg @ref LL_EXTI_LINE_28
|
||
|
|
* @arg @ref LL_EXTI_LINE_29
|
||
|
|
* @arg @ref LL_EXTI_LINE_30
|
||
|
|
* @arg @ref LL_EXTI_LINE_31
|
||
|
|
* @arg @ref LL_EXTI_LINE_ALL_0_31 (*)
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @note Please check each device line mapping for EXTI Line availability
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
CLEAR_BIT(EXTI->IMR1, ExtiLine);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable ExtiLine Interrupt request for Lines in range 32 to 63
|
||
|
|
* @note The reset value for the direct lines (lines from 32 to 34, line
|
||
|
|
* 39) is set to 1 in order to enable the interrupt by default.
|
||
|
|
* Bits are set automatically at Power on.
|
||
|
|
* @rmtoll IMR2 IMx LL_EXTI_DisableIT_32_63
|
||
|
|
* @param ExtiLine This parameter can be one of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_32 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_33 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_34
|
||
|
|
* @arg @ref LL_EXTI_LINE_35 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_36
|
||
|
|
* @arg @ref LL_EXTI_LINE_37
|
||
|
|
* @arg @ref LL_EXTI_LINE_38
|
||
|
|
* @arg @ref LL_EXTI_LINE_39
|
||
|
|
* @arg @ref LL_EXTI_LINE_40
|
||
|
|
* @arg @ref LL_EXTI_LINE_41
|
||
|
|
* @arg @ref LL_EXTI_LINE_42(*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_ALL_32_63
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void LL_EXTI_DisableIT_32_63(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
CLEAR_BIT(EXTI->IMR2, ExtiLine);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31
|
||
|
|
* @note The reset value for the direct or internal lines (see RM)
|
||
|
|
* is set to 1 in order to enable the interrupt by default.
|
||
|
|
* Bits are set automatically at Power on.
|
||
|
|
* @rmtoll IMR1 IMx LL_EXTI_IsEnabledIT_0_31
|
||
|
|
* @param ExtiLine This parameter can be one of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_0
|
||
|
|
* @arg @ref LL_EXTI_LINE_1
|
||
|
|
* @arg @ref LL_EXTI_LINE_2
|
||
|
|
* @arg @ref LL_EXTI_LINE_3
|
||
|
|
* @arg @ref LL_EXTI_LINE_4
|
||
|
|
* @arg @ref LL_EXTI_LINE_5
|
||
|
|
* @arg @ref LL_EXTI_LINE_6
|
||
|
|
* @arg @ref LL_EXTI_LINE_7
|
||
|
|
* @arg @ref LL_EXTI_LINE_8
|
||
|
|
* @arg @ref LL_EXTI_LINE_9
|
||
|
|
* @arg @ref LL_EXTI_LINE_10
|
||
|
|
* @arg @ref LL_EXTI_LINE_11
|
||
|
|
* @arg @ref LL_EXTI_LINE_12
|
||
|
|
* @arg @ref LL_EXTI_LINE_13
|
||
|
|
* @arg @ref LL_EXTI_LINE_14
|
||
|
|
* @arg @ref LL_EXTI_LINE_15
|
||
|
|
* @arg @ref LL_EXTI_LINE_16
|
||
|
|
* @arg @ref LL_EXTI_LINE_17
|
||
|
|
* @arg @ref LL_EXTI_LINE_18
|
||
|
|
* @arg @ref LL_EXTI_LINE_19
|
||
|
|
* @arg @ref LL_EXTI_LINE_20
|
||
|
|
* @arg @ref LL_EXTI_LINE_21
|
||
|
|
* @arg @ref LL_EXTI_LINE_22
|
||
|
|
* @arg @ref LL_EXTI_LINE_23
|
||
|
|
* @arg @ref LL_EXTI_LINE_24
|
||
|
|
* @arg @ref LL_EXTI_LINE_25
|
||
|
|
* @arg @ref LL_EXTI_LINE_26
|
||
|
|
* @arg @ref LL_EXTI_LINE_27
|
||
|
|
* @arg @ref LL_EXTI_LINE_28
|
||
|
|
* @arg @ref LL_EXTI_LINE_29
|
||
|
|
* @arg @ref LL_EXTI_LINE_30
|
||
|
|
* @arg @ref LL_EXTI_LINE_31 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_ALL_0_31
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @note Please check each device line mapping for EXTI Line availability
|
||
|
|
* @retval State of bit (1 or 0).
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
return ((READ_BIT(EXTI->IMR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 32 to 63
|
||
|
|
* @note The reset value for the direct lines (lines from 32 to 34, line
|
||
|
|
* 39) is set to 1 in order to enable the interrupt by default.
|
||
|
|
* Bits are set automatically at Power on.
|
||
|
|
* @rmtoll IMR2 IMx LL_EXTI_IsEnabledIT_32_63
|
||
|
|
* @param ExtiLine This parameter can be one of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_32 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_33 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_34
|
||
|
|
* @arg @ref LL_EXTI_LINE_35 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_36
|
||
|
|
* @arg @ref LL_EXTI_LINE_37
|
||
|
|
* @arg @ref LL_EXTI_LINE_38
|
||
|
|
* @arg @ref LL_EXTI_LINE_39
|
||
|
|
* @arg @ref LL_EXTI_LINE_40
|
||
|
|
* @arg @ref LL_EXTI_LINE_41
|
||
|
|
* @arg @ref LL_EXTI_LINE_42(*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_ALL_32_63
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @retval State of bit (1 or 0).
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_32_63(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
return ((READ_BIT(EXTI->IMR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup EXTI_LL_EF_Event_Management Event_Management
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable ExtiLine Event request for Lines in range 0 to 31
|
||
|
|
* @rmtoll EMR1 EMx LL_EXTI_EnableEvent_0_31
|
||
|
|
* @param ExtiLine This parameter can be one of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_0
|
||
|
|
* @arg @ref LL_EXTI_LINE_1
|
||
|
|
* @arg @ref LL_EXTI_LINE_2
|
||
|
|
* @arg @ref LL_EXTI_LINE_3
|
||
|
|
* @arg @ref LL_EXTI_LINE_4
|
||
|
|
* @arg @ref LL_EXTI_LINE_5
|
||
|
|
* @arg @ref LL_EXTI_LINE_6
|
||
|
|
* @arg @ref LL_EXTI_LINE_7
|
||
|
|
* @arg @ref LL_EXTI_LINE_8
|
||
|
|
* @arg @ref LL_EXTI_LINE_9
|
||
|
|
* @arg @ref LL_EXTI_LINE_10
|
||
|
|
* @arg @ref LL_EXTI_LINE_11
|
||
|
|
* @arg @ref LL_EXTI_LINE_12
|
||
|
|
* @arg @ref LL_EXTI_LINE_13
|
||
|
|
* @arg @ref LL_EXTI_LINE_14
|
||
|
|
* @arg @ref LL_EXTI_LINE_15
|
||
|
|
* @arg @ref LL_EXTI_LINE_16
|
||
|
|
* @arg @ref LL_EXTI_LINE_17
|
||
|
|
* @arg @ref LL_EXTI_LINE_18
|
||
|
|
* @arg @ref LL_EXTI_LINE_19
|
||
|
|
* @arg @ref LL_EXTI_LINE_20
|
||
|
|
* @arg @ref LL_EXTI_LINE_21
|
||
|
|
* @arg @ref LL_EXTI_LINE_22
|
||
|
|
* @arg @ref LL_EXTI_LINE_23
|
||
|
|
* @arg @ref LL_EXTI_LINE_24
|
||
|
|
* @arg @ref LL_EXTI_LINE_25
|
||
|
|
* @arg @ref LL_EXTI_LINE_26
|
||
|
|
* @arg @ref LL_EXTI_LINE_27
|
||
|
|
* @arg @ref LL_EXTI_LINE_28
|
||
|
|
* @arg @ref LL_EXTI_LINE_29
|
||
|
|
* @arg @ref LL_EXTI_LINE_30
|
||
|
|
* @arg @ref LL_EXTI_LINE_31
|
||
|
|
* @arg @ref LL_EXTI_LINE_ALL_0_31 (*)
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @note Please check each device line mapping for EXTI Line availability
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
SET_BIT(EXTI->EMR1, ExtiLine);
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable ExtiLine Event request for Lines in range 32 to 63
|
||
|
|
* @rmtoll EMR2 EMx LL_EXTI_EnableEvent_32_63
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_32 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_33 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_34
|
||
|
|
* @arg @ref LL_EXTI_LINE_35 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_36
|
||
|
|
* @arg @ref LL_EXTI_LINE_37
|
||
|
|
* @arg @ref LL_EXTI_LINE_38
|
||
|
|
* @arg @ref LL_EXTI_LINE_39
|
||
|
|
* @arg @ref LL_EXTI_LINE_40
|
||
|
|
* @arg @ref LL_EXTI_LINE_41
|
||
|
|
* @arg @ref LL_EXTI_LINE_42(*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_ALL_32_63
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void LL_EXTI_EnableEvent_32_63(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
SET_BIT(EXTI->EMR2, ExtiLine);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable ExtiLine Event request for Lines in range 0 to 31
|
||
|
|
* @rmtoll EMR1 EMx LL_EXTI_DisableEvent_0_31
|
||
|
|
* @param ExtiLine This parameter can be one of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_0
|
||
|
|
* @arg @ref LL_EXTI_LINE_1
|
||
|
|
* @arg @ref LL_EXTI_LINE_2
|
||
|
|
* @arg @ref LL_EXTI_LINE_3
|
||
|
|
* @arg @ref LL_EXTI_LINE_4
|
||
|
|
* @arg @ref LL_EXTI_LINE_5
|
||
|
|
* @arg @ref LL_EXTI_LINE_6
|
||
|
|
* @arg @ref LL_EXTI_LINE_7
|
||
|
|
* @arg @ref LL_EXTI_LINE_8
|
||
|
|
* @arg @ref LL_EXTI_LINE_9
|
||
|
|
* @arg @ref LL_EXTI_LINE_10
|
||
|
|
* @arg @ref LL_EXTI_LINE_11
|
||
|
|
* @arg @ref LL_EXTI_LINE_12
|
||
|
|
* @arg @ref LL_EXTI_LINE_13
|
||
|
|
* @arg @ref LL_EXTI_LINE_14
|
||
|
|
* @arg @ref LL_EXTI_LINE_15
|
||
|
|
* @arg @ref LL_EXTI_LINE_16
|
||
|
|
* @arg @ref LL_EXTI_LINE_17
|
||
|
|
* @arg @ref LL_EXTI_LINE_18
|
||
|
|
* @arg @ref LL_EXTI_LINE_19
|
||
|
|
* @arg @ref LL_EXTI_LINE_20
|
||
|
|
* @arg @ref LL_EXTI_LINE_21
|
||
|
|
* @arg @ref LL_EXTI_LINE_22
|
||
|
|
* @arg @ref LL_EXTI_LINE_23
|
||
|
|
* @arg @ref LL_EXTI_LINE_24
|
||
|
|
* @arg @ref LL_EXTI_LINE_25
|
||
|
|
* @arg @ref LL_EXTI_LINE_26
|
||
|
|
* @arg @ref LL_EXTI_LINE_27
|
||
|
|
* @arg @ref LL_EXTI_LINE_28
|
||
|
|
* @arg @ref LL_EXTI_LINE_29
|
||
|
|
* @arg @ref LL_EXTI_LINE_30
|
||
|
|
* @arg @ref LL_EXTI_LINE_31 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_ALL_0_31
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @note Please check each device line mapping for EXTI Line availability
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
CLEAR_BIT(EXTI->EMR1, ExtiLine);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable ExtiLine Event request for Lines in range 32 to 63
|
||
|
|
* @rmtoll EMR2 EMx LL_EXTI_DisableEvent_32_63
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_32 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_33 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_34
|
||
|
|
* @arg @ref LL_EXTI_LINE_35 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_36
|
||
|
|
* @arg @ref LL_EXTI_LINE_37
|
||
|
|
* @arg @ref LL_EXTI_LINE_38
|
||
|
|
* @arg @ref LL_EXTI_LINE_39
|
||
|
|
* @arg @ref LL_EXTI_LINE_40
|
||
|
|
* @arg @ref LL_EXTI_LINE_41
|
||
|
|
* @arg @ref LL_EXTI_LINE_42(*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_ALL_32_63
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void LL_EXTI_DisableEvent_32_63(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
CLEAR_BIT(EXTI->EMR2, ExtiLine);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31
|
||
|
|
* @rmtoll EMR1 EMx LL_EXTI_IsEnabledEvent_0_31
|
||
|
|
* @param ExtiLine This parameter can be one of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_0
|
||
|
|
* @arg @ref LL_EXTI_LINE_1
|
||
|
|
* @arg @ref LL_EXTI_LINE_2
|
||
|
|
* @arg @ref LL_EXTI_LINE_3
|
||
|
|
* @arg @ref LL_EXTI_LINE_4
|
||
|
|
* @arg @ref LL_EXTI_LINE_5
|
||
|
|
* @arg @ref LL_EXTI_LINE_6
|
||
|
|
* @arg @ref LL_EXTI_LINE_7
|
||
|
|
* @arg @ref LL_EXTI_LINE_8
|
||
|
|
* @arg @ref LL_EXTI_LINE_9
|
||
|
|
* @arg @ref LL_EXTI_LINE_10
|
||
|
|
* @arg @ref LL_EXTI_LINE_11
|
||
|
|
* @arg @ref LL_EXTI_LINE_12
|
||
|
|
* @arg @ref LL_EXTI_LINE_13
|
||
|
|
* @arg @ref LL_EXTI_LINE_14
|
||
|
|
* @arg @ref LL_EXTI_LINE_15
|
||
|
|
* @arg @ref LL_EXTI_LINE_16
|
||
|
|
* @arg @ref LL_EXTI_LINE_17
|
||
|
|
* @arg @ref LL_EXTI_LINE_18
|
||
|
|
* @arg @ref LL_EXTI_LINE_19
|
||
|
|
* @arg @ref LL_EXTI_LINE_20
|
||
|
|
* @arg @ref LL_EXTI_LINE_21
|
||
|
|
* @arg @ref LL_EXTI_LINE_22
|
||
|
|
* @arg @ref LL_EXTI_LINE_23
|
||
|
|
* @arg @ref LL_EXTI_LINE_24
|
||
|
|
* @arg @ref LL_EXTI_LINE_25
|
||
|
|
* @arg @ref LL_EXTI_LINE_26
|
||
|
|
* @arg @ref LL_EXTI_LINE_27
|
||
|
|
* @arg @ref LL_EXTI_LINE_28
|
||
|
|
* @arg @ref LL_EXTI_LINE_29
|
||
|
|
* @arg @ref LL_EXTI_LINE_30
|
||
|
|
* @arg @ref LL_EXTI_LINE_31
|
||
|
|
* @arg @ref LL_EXTI_LINE_ALL_0_31 (*)
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @note Please check each device line mapping for EXTI Line availability
|
||
|
|
* @retval State of bit (1 or 0).
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
return ((READ_BIT(EXTI->EMR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Indicate if ExtiLine Event request is enabled for Lines in range 32 to 63
|
||
|
|
* @rmtoll EMR2 EMx LL_EXTI_IsEnabledEvent_32_63
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_32 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_33 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_34
|
||
|
|
* @arg @ref LL_EXTI_LINE_35 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_36
|
||
|
|
* @arg @ref LL_EXTI_LINE_37
|
||
|
|
* @arg @ref LL_EXTI_LINE_38
|
||
|
|
* @arg @ref LL_EXTI_LINE_39
|
||
|
|
* @arg @ref LL_EXTI_LINE_40
|
||
|
|
* @arg @ref LL_EXTI_LINE_41
|
||
|
|
* @arg @ref LL_EXTI_LINE_42(*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_ALL_32_63
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @retval State of bit (1 or 0).
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_32_63(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
return ((READ_BIT(EXTI->EMR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
|
||
|
|
* @note The configurable wakeup lines are edge-triggered. No glitch must be
|
||
|
|
* generated on these lines. If a rising edge on a configurable interrupt
|
||
|
|
* line occurs during a write operation in the EXTI_RTSR register, the
|
||
|
|
* pending bit is not set.
|
||
|
|
* Rising and falling edge triggers can be set for
|
||
|
|
* the same interrupt line. In this case, both generate a trigger
|
||
|
|
* condition.
|
||
|
|
* @rmtoll RTSR1 RTx LL_EXTI_EnableRisingTrig_0_31
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_0
|
||
|
|
* @arg @ref LL_EXTI_LINE_1
|
||
|
|
* @arg @ref LL_EXTI_LINE_2
|
||
|
|
* @arg @ref LL_EXTI_LINE_3
|
||
|
|
* @arg @ref LL_EXTI_LINE_4
|
||
|
|
* @arg @ref LL_EXTI_LINE_5
|
||
|
|
* @arg @ref LL_EXTI_LINE_6
|
||
|
|
* @arg @ref LL_EXTI_LINE_7
|
||
|
|
* @arg @ref LL_EXTI_LINE_8
|
||
|
|
* @arg @ref LL_EXTI_LINE_9
|
||
|
|
* @arg @ref LL_EXTI_LINE_10
|
||
|
|
* @arg @ref LL_EXTI_LINE_11
|
||
|
|
* @arg @ref LL_EXTI_LINE_12
|
||
|
|
* @arg @ref LL_EXTI_LINE_13
|
||
|
|
* @arg @ref LL_EXTI_LINE_14
|
||
|
|
* @arg @ref LL_EXTI_LINE_15
|
||
|
|
* @arg @ref LL_EXTI_LINE_16
|
||
|
|
* @arg @ref LL_EXTI_LINE_18
|
||
|
|
* @arg @ref LL_EXTI_LINE_19
|
||
|
|
* @arg @ref LL_EXTI_LINE_20
|
||
|
|
* @arg @ref LL_EXTI_LINE_21
|
||
|
|
* @arg @ref LL_EXTI_LINE_22
|
||
|
|
* @arg @ref LL_EXTI_LINE_29
|
||
|
|
* @arg @ref LL_EXTI_LINE_30
|
||
|
|
* @arg @ref LL_EXTI_LINE_31 (*)
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @note Please check each device line mapping for EXTI Line availability
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
SET_BIT(EXTI->RTSR1, ExtiLine);
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable ExtiLine Rising Edge Trigger for Lines in range 32 to 63
|
||
|
|
* @note The configurable wakeup lines are edge-triggered. No glitch must be
|
||
|
|
* generated on these lines. If a rising edge on a configurable interrupt
|
||
|
|
* line occurs during a write operation in the EXTI_RTSR register, the
|
||
|
|
* pending bit is not set.Rising and falling edge triggers can be set for
|
||
|
|
* the same interrupt line. In this case, both generate a trigger
|
||
|
|
* condition.
|
||
|
|
* @rmtoll RTSR2 RTx LL_EXTI_EnableRisingTrig_32_63
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_32 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_33 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_38
|
||
|
|
* @arg @ref LL_EXTI_LINE_39
|
||
|
|
* @arg @ref LL_EXTI_LINE_40
|
||
|
|
* @arg @ref LL_EXTI_LINE_41
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void LL_EXTI_EnableRisingTrig_32_63(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
SET_BIT(EXTI->RTSR2, ExtiLine);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
|
||
|
|
* @note The configurable wakeup lines are edge-triggered. No glitch must be
|
||
|
|
* generated on these lines. If a rising edge on a configurable interrupt
|
||
|
|
* line occurs during a write operation in the EXTI_RTSR register, the
|
||
|
|
* pending bit is not set.
|
||
|
|
* Rising and falling edge triggers can be set for
|
||
|
|
* the same interrupt line. In this case, both generate a trigger
|
||
|
|
* condition.
|
||
|
|
* @rmtoll RTSR1 RTx LL_EXTI_DisableRisingTrig_0_31
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_0
|
||
|
|
* @arg @ref LL_EXTI_LINE_1
|
||
|
|
* @arg @ref LL_EXTI_LINE_2
|
||
|
|
* @arg @ref LL_EXTI_LINE_3
|
||
|
|
* @arg @ref LL_EXTI_LINE_4
|
||
|
|
* @arg @ref LL_EXTI_LINE_5
|
||
|
|
* @arg @ref LL_EXTI_LINE_6
|
||
|
|
* @arg @ref LL_EXTI_LINE_7
|
||
|
|
* @arg @ref LL_EXTI_LINE_8
|
||
|
|
* @arg @ref LL_EXTI_LINE_9
|
||
|
|
* @arg @ref LL_EXTI_LINE_10
|
||
|
|
* @arg @ref LL_EXTI_LINE_11
|
||
|
|
* @arg @ref LL_EXTI_LINE_12
|
||
|
|
* @arg @ref LL_EXTI_LINE_13
|
||
|
|
* @arg @ref LL_EXTI_LINE_14
|
||
|
|
* @arg @ref LL_EXTI_LINE_15
|
||
|
|
* @arg @ref LL_EXTI_LINE_16
|
||
|
|
* @arg @ref LL_EXTI_LINE_18
|
||
|
|
* @arg @ref LL_EXTI_LINE_19
|
||
|
|
* @arg @ref LL_EXTI_LINE_20
|
||
|
|
* @arg @ref LL_EXTI_LINE_21
|
||
|
|
* @arg @ref LL_EXTI_LINE_22
|
||
|
|
* @arg @ref LL_EXTI_LINE_29
|
||
|
|
* @arg @ref LL_EXTI_LINE_30
|
||
|
|
* @arg @ref LL_EXTI_LINE_31 (*)
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @note Please check each device line mapping for EXTI Line availability
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
CLEAR_BIT(EXTI->RTSR1, ExtiLine);
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable ExtiLine Rising Edge Trigger for Lines in range 32 to 63
|
||
|
|
* @note The configurable wakeup lines are edge-triggered. No glitch must be
|
||
|
|
* generated on these lines. If a rising edge on a configurable interrupt
|
||
|
|
* line occurs during a write operation in the EXTI_RTSR register, the
|
||
|
|
* pending bit is not set.
|
||
|
|
* Rising and falling edge triggers can be set for
|
||
|
|
* the same interrupt line. In this case, both generate a trigger
|
||
|
|
* condition.
|
||
|
|
* @rmtoll RTSR2 RTx LL_EXTI_DisableRisingTrig_32_63
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_32 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_33 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_38
|
||
|
|
* @arg @ref LL_EXTI_LINE_39
|
||
|
|
* @arg @ref LL_EXTI_LINE_40
|
||
|
|
* @arg @ref LL_EXTI_LINE_41
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void LL_EXTI_DisableRisingTrig_32_63(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
CLEAR_BIT(EXTI->RTSR2, ExtiLine);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Check if rising edge trigger is enabled for Lines in range 0 to 31
|
||
|
|
* @rmtoll RTSR1 RTx LL_EXTI_IsEnabledRisingTrig_0_31
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_0
|
||
|
|
* @arg @ref LL_EXTI_LINE_1
|
||
|
|
* @arg @ref LL_EXTI_LINE_2
|
||
|
|
* @arg @ref LL_EXTI_LINE_3
|
||
|
|
* @arg @ref LL_EXTI_LINE_4
|
||
|
|
* @arg @ref LL_EXTI_LINE_5
|
||
|
|
* @arg @ref LL_EXTI_LINE_6
|
||
|
|
* @arg @ref LL_EXTI_LINE_7
|
||
|
|
* @arg @ref LL_EXTI_LINE_8
|
||
|
|
* @arg @ref LL_EXTI_LINE_9
|
||
|
|
* @arg @ref LL_EXTI_LINE_10
|
||
|
|
* @arg @ref LL_EXTI_LINE_11
|
||
|
|
* @arg @ref LL_EXTI_LINE_12
|
||
|
|
* @arg @ref LL_EXTI_LINE_13
|
||
|
|
* @arg @ref LL_EXTI_LINE_14
|
||
|
|
* @arg @ref LL_EXTI_LINE_15
|
||
|
|
* @arg @ref LL_EXTI_LINE_16
|
||
|
|
* @arg @ref LL_EXTI_LINE_18
|
||
|
|
* @arg @ref LL_EXTI_LINE_19
|
||
|
|
* @arg @ref LL_EXTI_LINE_20
|
||
|
|
* @arg @ref LL_EXTI_LINE_21
|
||
|
|
* @arg @ref LL_EXTI_LINE_22
|
||
|
|
* @arg @ref LL_EXTI_LINE_29
|
||
|
|
* @arg @ref LL_EXTI_LINE_30
|
||
|
|
* @arg @ref LL_EXTI_LINE_31 (*)
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @note Please check each device line mapping for EXTI Line availability
|
||
|
|
* @retval State of bit (1 or 0).
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
return ((READ_BIT(EXTI->RTSR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Check if rising edge trigger is enabled for Lines in range 32 to 63
|
||
|
|
* @rmtoll RTSR2 RTx LL_EXTI_IsEnabledRisingTrig_32_63
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_32 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_33 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_38
|
||
|
|
* @arg @ref LL_EXTI_LINE_39
|
||
|
|
* @arg @ref LL_EXTI_LINE_40
|
||
|
|
* @arg @ref LL_EXTI_LINE_41
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @retval State of bit (1 or 0).
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_32_63(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
return ((READ_BIT(EXTI->RTSR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
|
||
|
|
* @note The configurable wakeup lines are edge-triggered. No glitch must be
|
||
|
|
* generated on these lines. If a falling edge on a configurable interrupt
|
||
|
|
* line occurs during a write operation in the EXTI_FTSR register, the
|
||
|
|
* pending bit is not set.
|
||
|
|
* Rising and falling edge triggers can be set for
|
||
|
|
* the same interrupt line. In this case, both generate a trigger
|
||
|
|
* condition.
|
||
|
|
* @rmtoll FTSR1 FTx LL_EXTI_EnableFallingTrig_0_31
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_0
|
||
|
|
* @arg @ref LL_EXTI_LINE_1
|
||
|
|
* @arg @ref LL_EXTI_LINE_2
|
||
|
|
* @arg @ref LL_EXTI_LINE_3
|
||
|
|
* @arg @ref LL_EXTI_LINE_4
|
||
|
|
* @arg @ref LL_EXTI_LINE_5
|
||
|
|
* @arg @ref LL_EXTI_LINE_6
|
||
|
|
* @arg @ref LL_EXTI_LINE_7
|
||
|
|
* @arg @ref LL_EXTI_LINE_8
|
||
|
|
* @arg @ref LL_EXTI_LINE_9
|
||
|
|
* @arg @ref LL_EXTI_LINE_10
|
||
|
|
* @arg @ref LL_EXTI_LINE_11
|
||
|
|
* @arg @ref LL_EXTI_LINE_12
|
||
|
|
* @arg @ref LL_EXTI_LINE_13
|
||
|
|
* @arg @ref LL_EXTI_LINE_14
|
||
|
|
* @arg @ref LL_EXTI_LINE_15
|
||
|
|
* @arg @ref LL_EXTI_LINE_16
|
||
|
|
* @arg @ref LL_EXTI_LINE_18
|
||
|
|
* @arg @ref LL_EXTI_LINE_19
|
||
|
|
* @arg @ref LL_EXTI_LINE_20
|
||
|
|
* @arg @ref LL_EXTI_LINE_21
|
||
|
|
* @arg @ref LL_EXTI_LINE_22
|
||
|
|
* @arg @ref LL_EXTI_LINE_29
|
||
|
|
* @arg @ref LL_EXTI_LINE_30
|
||
|
|
* @arg @ref LL_EXTI_LINE_31 (*)
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @note Please check each device line mapping for EXTI Line availability
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
SET_BIT(EXTI->FTSR1, ExtiLine);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable ExtiLine Falling Edge Trigger for Lines in range 32 to 63
|
||
|
|
* @note The configurable wakeup lines are edge-triggered. No glitch must be
|
||
|
|
* generated on these lines. If a Falling edge on a configurable interrupt
|
||
|
|
* line occurs during a write operation in the EXTI_FTSR register, the
|
||
|
|
* pending bit is not set.
|
||
|
|
* Rising and falling edge triggers can be set for
|
||
|
|
* the same interrupt line. In this case, both generate a trigger
|
||
|
|
* condition.
|
||
|
|
* @rmtoll FTSR2 FTx LL_EXTI_EnableFallingTrig_32_63
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_32 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_33 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_38
|
||
|
|
* @arg @ref LL_EXTI_LINE_39
|
||
|
|
* @arg @ref LL_EXTI_LINE_40
|
||
|
|
* @arg @ref LL_EXTI_LINE_41
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void LL_EXTI_EnableFallingTrig_32_63(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
SET_BIT(EXTI->FTSR2, ExtiLine);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
|
||
|
|
* @note The configurable wakeup lines are edge-triggered. No glitch must be
|
||
|
|
* generated on these lines. If a Falling edge on a configurable interrupt
|
||
|
|
* line occurs during a write operation in the EXTI_FTSR register, the
|
||
|
|
* pending bit is not set.
|
||
|
|
* Rising and falling edge triggers can be set for the same interrupt line.
|
||
|
|
* In this case, both generate a trigger condition.
|
||
|
|
* @rmtoll FTSR1 FTx LL_EXTI_DisableFallingTrig_0_31
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_0
|
||
|
|
* @arg @ref LL_EXTI_LINE_1
|
||
|
|
* @arg @ref LL_EXTI_LINE_2
|
||
|
|
* @arg @ref LL_EXTI_LINE_3
|
||
|
|
* @arg @ref LL_EXTI_LINE_4
|
||
|
|
* @arg @ref LL_EXTI_LINE_5
|
||
|
|
* @arg @ref LL_EXTI_LINE_6
|
||
|
|
* @arg @ref LL_EXTI_LINE_7
|
||
|
|
* @arg @ref LL_EXTI_LINE_8
|
||
|
|
* @arg @ref LL_EXTI_LINE_9
|
||
|
|
* @arg @ref LL_EXTI_LINE_10
|
||
|
|
* @arg @ref LL_EXTI_LINE_11
|
||
|
|
* @arg @ref LL_EXTI_LINE_12
|
||
|
|
* @arg @ref LL_EXTI_LINE_13
|
||
|
|
* @arg @ref LL_EXTI_LINE_14
|
||
|
|
* @arg @ref LL_EXTI_LINE_15
|
||
|
|
* @arg @ref LL_EXTI_LINE_16
|
||
|
|
* @arg @ref LL_EXTI_LINE_18
|
||
|
|
* @arg @ref LL_EXTI_LINE_19
|
||
|
|
* @arg @ref LL_EXTI_LINE_20
|
||
|
|
* @arg @ref LL_EXTI_LINE_21
|
||
|
|
* @arg @ref LL_EXTI_LINE_22
|
||
|
|
* @arg @ref LL_EXTI_LINE_29
|
||
|
|
* @arg @ref LL_EXTI_LINE_30
|
||
|
|
* @arg @ref LL_EXTI_LINE_31 (*)
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @note Please check each device line mapping for EXTI Line availability
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
CLEAR_BIT(EXTI->FTSR1, ExtiLine);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable ExtiLine Falling Edge Trigger for Lines in range 32 to 63
|
||
|
|
* @note The configurable wakeup lines are edge-triggered. No glitch must be
|
||
|
|
* generated on these lines. If a Falling edge on a configurable interrupt
|
||
|
|
* line occurs during a write operation in the EXTI_FTSR register, the
|
||
|
|
* pending bit is not set.
|
||
|
|
* Rising and falling edge triggers can be set for the same interrupt line.
|
||
|
|
* In this case, both generate a trigger condition.
|
||
|
|
* @rmtoll FTSR2 FTx LL_EXTI_DisableFallingTrig_32_63
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_32 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_33 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_38
|
||
|
|
* @arg @ref LL_EXTI_LINE_39
|
||
|
|
* @arg @ref LL_EXTI_LINE_40
|
||
|
|
* @arg @ref LL_EXTI_LINE_41
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void LL_EXTI_DisableFallingTrig_32_63(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
CLEAR_BIT(EXTI->FTSR2, ExtiLine);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Check if falling edge trigger is enabled for Lines in range 0 to 31
|
||
|
|
* @rmtoll FTSR1 FTx LL_EXTI_IsEnabledFallingTrig_0_31
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_0
|
||
|
|
* @arg @ref LL_EXTI_LINE_1
|
||
|
|
* @arg @ref LL_EXTI_LINE_2
|
||
|
|
* @arg @ref LL_EXTI_LINE_3
|
||
|
|
* @arg @ref LL_EXTI_LINE_4
|
||
|
|
* @arg @ref LL_EXTI_LINE_5
|
||
|
|
* @arg @ref LL_EXTI_LINE_6
|
||
|
|
* @arg @ref LL_EXTI_LINE_7
|
||
|
|
* @arg @ref LL_EXTI_LINE_8
|
||
|
|
* @arg @ref LL_EXTI_LINE_9
|
||
|
|
* @arg @ref LL_EXTI_LINE_10
|
||
|
|
* @arg @ref LL_EXTI_LINE_11
|
||
|
|
* @arg @ref LL_EXTI_LINE_12
|
||
|
|
* @arg @ref LL_EXTI_LINE_13
|
||
|
|
* @arg @ref LL_EXTI_LINE_14
|
||
|
|
* @arg @ref LL_EXTI_LINE_15
|
||
|
|
* @arg @ref LL_EXTI_LINE_16
|
||
|
|
* @arg @ref LL_EXTI_LINE_18
|
||
|
|
* @arg @ref LL_EXTI_LINE_19
|
||
|
|
* @arg @ref LL_EXTI_LINE_20
|
||
|
|
* @arg @ref LL_EXTI_LINE_21
|
||
|
|
* @arg @ref LL_EXTI_LINE_22
|
||
|
|
* @arg @ref LL_EXTI_LINE_29
|
||
|
|
* @arg @ref LL_EXTI_LINE_30
|
||
|
|
* @arg @ref LL_EXTI_LINE_31 (*)
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @note Please check each device line mapping for EXTI Line availability
|
||
|
|
* @retval State of bit (1 or 0).
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
return ((READ_BIT(EXTI->FTSR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Check if falling edge trigger is enabled for Lines in range 32 to 63
|
||
|
|
* @rmtoll FTSR2 FTx LL_EXTI_IsEnabledFallingTrig_32_63
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_32 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_33 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_38
|
||
|
|
* @arg @ref LL_EXTI_LINE_39
|
||
|
|
* @arg @ref LL_EXTI_LINE_40
|
||
|
|
* @arg @ref LL_EXTI_LINE_41
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @retval State of bit (1 or 0).
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_32_63(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
return ((READ_BIT(EXTI->FTSR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Generate a software Interrupt Event for Lines in range 0 to 31
|
||
|
|
* @note If the interrupt is enabled on this line in the EXTI_IMR1, writing a 1 to
|
||
|
|
* this bit when it is at '0' sets the corresponding pending bit in EXTI_PR1
|
||
|
|
* resulting in an interrupt request generation.
|
||
|
|
* This bit is cleared by clearing the corresponding bit in the EXTI_PR1
|
||
|
|
* register (by writing a 1 into the bit)
|
||
|
|
* @rmtoll SWIER1 SWIx LL_EXTI_GenerateSWI_0_31
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_0
|
||
|
|
* @arg @ref LL_EXTI_LINE_1
|
||
|
|
* @arg @ref LL_EXTI_LINE_2
|
||
|
|
* @arg @ref LL_EXTI_LINE_3
|
||
|
|
* @arg @ref LL_EXTI_LINE_4
|
||
|
|
* @arg @ref LL_EXTI_LINE_5
|
||
|
|
* @arg @ref LL_EXTI_LINE_6
|
||
|
|
* @arg @ref LL_EXTI_LINE_7
|
||
|
|
* @arg @ref LL_EXTI_LINE_8
|
||
|
|
* @arg @ref LL_EXTI_LINE_9
|
||
|
|
* @arg @ref LL_EXTI_LINE_10
|
||
|
|
* @arg @ref LL_EXTI_LINE_11
|
||
|
|
* @arg @ref LL_EXTI_LINE_12
|
||
|
|
* @arg @ref LL_EXTI_LINE_13
|
||
|
|
* @arg @ref LL_EXTI_LINE_14
|
||
|
|
* @arg @ref LL_EXTI_LINE_15
|
||
|
|
* @arg @ref LL_EXTI_LINE_16
|
||
|
|
* @arg @ref LL_EXTI_LINE_18
|
||
|
|
* @arg @ref LL_EXTI_LINE_19
|
||
|
|
* @arg @ref LL_EXTI_LINE_20
|
||
|
|
* @arg @ref LL_EXTI_LINE_21
|
||
|
|
* @arg @ref LL_EXTI_LINE_22
|
||
|
|
* @arg @ref LL_EXTI_LINE_29
|
||
|
|
* @arg @ref LL_EXTI_LINE_30
|
||
|
|
* @arg @ref LL_EXTI_LINE_31 (*)
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @note Please check each device line mapping for EXTI Line availability
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
SET_BIT(EXTI->SWIER1, ExtiLine);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Generate a software Interrupt Event for Lines in range 32 to 63
|
||
|
|
* @note If the interrupt is enabled on this line in the EXTI_IMR2, writing a 1 to
|
||
|
|
* this bit when it is at '0' sets the corresponding pending bit in EXTI_PR2
|
||
|
|
* resulting in an interrupt request generation.
|
||
|
|
* This bit is cleared by clearing the corresponding bit in the EXTI_PR2
|
||
|
|
* register (by writing a 1 into the bit)
|
||
|
|
* @rmtoll SWIER2 SWIx LL_EXTI_GenerateSWI_32_63
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_32 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_33 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_38
|
||
|
|
* @arg @ref LL_EXTI_LINE_39
|
||
|
|
* @arg @ref LL_EXTI_LINE_40
|
||
|
|
* @arg @ref LL_EXTI_LINE_41
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void LL_EXTI_GenerateSWI_32_63(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
SET_BIT(EXTI->SWIER2, ExtiLine);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31
|
||
|
|
* @note This bit is set when the selected edge event arrives on the interrupt
|
||
|
|
* line. This bit is cleared by writing a 1 to the bit.
|
||
|
|
* @rmtoll PR1 PIFx LL_EXTI_IsActiveFlag_0_31
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_0
|
||
|
|
* @arg @ref LL_EXTI_LINE_1
|
||
|
|
* @arg @ref LL_EXTI_LINE_2
|
||
|
|
* @arg @ref LL_EXTI_LINE_3
|
||
|
|
* @arg @ref LL_EXTI_LINE_4
|
||
|
|
* @arg @ref LL_EXTI_LINE_5
|
||
|
|
* @arg @ref LL_EXTI_LINE_6
|
||
|
|
* @arg @ref LL_EXTI_LINE_7
|
||
|
|
* @arg @ref LL_EXTI_LINE_8
|
||
|
|
* @arg @ref LL_EXTI_LINE_9
|
||
|
|
* @arg @ref LL_EXTI_LINE_10
|
||
|
|
* @arg @ref LL_EXTI_LINE_11
|
||
|
|
* @arg @ref LL_EXTI_LINE_12
|
||
|
|
* @arg @ref LL_EXTI_LINE_13
|
||
|
|
* @arg @ref LL_EXTI_LINE_14
|
||
|
|
* @arg @ref LL_EXTI_LINE_15
|
||
|
|
* @arg @ref LL_EXTI_LINE_16
|
||
|
|
* @arg @ref LL_EXTI_LINE_18
|
||
|
|
* @arg @ref LL_EXTI_LINE_19
|
||
|
|
* @arg @ref LL_EXTI_LINE_20
|
||
|
|
* @arg @ref LL_EXTI_LINE_21
|
||
|
|
* @arg @ref LL_EXTI_LINE_22
|
||
|
|
* @arg @ref LL_EXTI_LINE_29
|
||
|
|
* @arg @ref LL_EXTI_LINE_30
|
||
|
|
* @arg @ref LL_EXTI_LINE_31 (*)
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @note Please check each device line mapping for EXTI Line availability
|
||
|
|
* @retval State of bit (1 or 0).
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
return ((READ_BIT(EXTI->PR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Check if the ExtLine Flag is set or not for Lines in range 32 to 63
|
||
|
|
* @note This bit is set when the selected edge event arrives on the interrupt
|
||
|
|
* line. This bit is cleared by writing a 1 to the bit.
|
||
|
|
* @rmtoll PR2 PIFx LL_EXTI_IsActiveFlag_32_63
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_32 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_33 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_38
|
||
|
|
* @arg @ref LL_EXTI_LINE_39
|
||
|
|
* @arg @ref LL_EXTI_LINE_40
|
||
|
|
* @arg @ref LL_EXTI_LINE_41
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @retval State of bit (1 or 0).
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_32_63(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
return ((READ_BIT(EXTI->PR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Read ExtLine Combination Flag for Lines in range 0 to 31
|
||
|
|
* @note This bit is set when the selected edge event arrives on the interrupt
|
||
|
|
* line. This bit is cleared by writing a 1 to the bit.
|
||
|
|
* @rmtoll PR1 PIFx LL_EXTI_ReadFlag_0_31
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_0
|
||
|
|
* @arg @ref LL_EXTI_LINE_1
|
||
|
|
* @arg @ref LL_EXTI_LINE_2
|
||
|
|
* @arg @ref LL_EXTI_LINE_3
|
||
|
|
* @arg @ref LL_EXTI_LINE_4
|
||
|
|
* @arg @ref LL_EXTI_LINE_5
|
||
|
|
* @arg @ref LL_EXTI_LINE_6
|
||
|
|
* @arg @ref LL_EXTI_LINE_7
|
||
|
|
* @arg @ref LL_EXTI_LINE_8
|
||
|
|
* @arg @ref LL_EXTI_LINE_9
|
||
|
|
* @arg @ref LL_EXTI_LINE_10
|
||
|
|
* @arg @ref LL_EXTI_LINE_11
|
||
|
|
* @arg @ref LL_EXTI_LINE_12
|
||
|
|
* @arg @ref LL_EXTI_LINE_13
|
||
|
|
* @arg @ref LL_EXTI_LINE_14
|
||
|
|
* @arg @ref LL_EXTI_LINE_15
|
||
|
|
* @arg @ref LL_EXTI_LINE_16
|
||
|
|
* @arg @ref LL_EXTI_LINE_18
|
||
|
|
* @arg @ref LL_EXTI_LINE_19
|
||
|
|
* @arg @ref LL_EXTI_LINE_20
|
||
|
|
* @arg @ref LL_EXTI_LINE_21
|
||
|
|
* @arg @ref LL_EXTI_LINE_22
|
||
|
|
* @arg @ref LL_EXTI_LINE_29
|
||
|
|
* @arg @ref LL_EXTI_LINE_30
|
||
|
|
* @arg @ref LL_EXTI_LINE_31 (*)
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @note Please check each device line mapping for EXTI Line availability
|
||
|
|
* @retval @note This bit is set when the selected edge event arrives on the interrupt
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
return (uint32_t)(READ_BIT(EXTI->PR1, ExtiLine));
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Read ExtLine Combination Flag for Lines in range 32 to 63
|
||
|
|
* @note This bit is set when the selected edge event arrives on the interrupt
|
||
|
|
* line. This bit is cleared by writing a 1 to the bit.
|
||
|
|
* @rmtoll PR2 PIFx LL_EXTI_ReadFlag_32_63
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_32 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_33 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_38
|
||
|
|
* @arg @ref LL_EXTI_LINE_39
|
||
|
|
* @arg @ref LL_EXTI_LINE_40
|
||
|
|
* @arg @ref LL_EXTI_LINE_41
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @retval @note This bit is set when the selected edge event arrives on the interrupt
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_32_63(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
return (uint32_t)(READ_BIT(EXTI->PR2, ExtiLine));
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Clear ExtLine Flags for Lines in range 0 to 31
|
||
|
|
* @note This bit is set when the selected edge event arrives on the interrupt
|
||
|
|
* line. This bit is cleared by writing a 1 to the bit.
|
||
|
|
* @rmtoll PR1 PIFx LL_EXTI_ClearFlag_0_31
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_0
|
||
|
|
* @arg @ref LL_EXTI_LINE_1
|
||
|
|
* @arg @ref LL_EXTI_LINE_2
|
||
|
|
* @arg @ref LL_EXTI_LINE_3
|
||
|
|
* @arg @ref LL_EXTI_LINE_4
|
||
|
|
* @arg @ref LL_EXTI_LINE_5
|
||
|
|
* @arg @ref LL_EXTI_LINE_6
|
||
|
|
* @arg @ref LL_EXTI_LINE_7
|
||
|
|
* @arg @ref LL_EXTI_LINE_8
|
||
|
|
* @arg @ref LL_EXTI_LINE_9
|
||
|
|
* @arg @ref LL_EXTI_LINE_10
|
||
|
|
* @arg @ref LL_EXTI_LINE_11
|
||
|
|
* @arg @ref LL_EXTI_LINE_12
|
||
|
|
* @arg @ref LL_EXTI_LINE_13
|
||
|
|
* @arg @ref LL_EXTI_LINE_14
|
||
|
|
* @arg @ref LL_EXTI_LINE_15
|
||
|
|
* @arg @ref LL_EXTI_LINE_16
|
||
|
|
* @arg @ref LL_EXTI_LINE_18
|
||
|
|
* @arg @ref LL_EXTI_LINE_19
|
||
|
|
* @arg @ref LL_EXTI_LINE_20
|
||
|
|
* @arg @ref LL_EXTI_LINE_21
|
||
|
|
* @arg @ref LL_EXTI_LINE_22
|
||
|
|
* @arg @ref LL_EXTI_LINE_29
|
||
|
|
* @arg @ref LL_EXTI_LINE_30
|
||
|
|
* @arg @ref LL_EXTI_LINE_31 (*)
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @note Please check each device line mapping for EXTI Line availability
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
WRITE_REG(EXTI->PR1, ExtiLine);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Clear ExtLine Flags for Lines in range 32 to 63
|
||
|
|
* @note This bit is set when the selected edge event arrives on the interrupt
|
||
|
|
* line. This bit is cleared by writing a 1 to the bit.
|
||
|
|
* @rmtoll PR2 PIFx LL_EXTI_ClearFlag_32_63
|
||
|
|
* @param ExtiLine This parameter can be a combination of the following values:
|
||
|
|
* @arg @ref LL_EXTI_LINE_32 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_33 (*)
|
||
|
|
* @arg @ref LL_EXTI_LINE_38
|
||
|
|
* @arg @ref LL_EXTI_LINE_39
|
||
|
|
* @arg @ref LL_EXTI_LINE_40
|
||
|
|
* @arg @ref LL_EXTI_LINE_41
|
||
|
|
* @note (*): Available in some devices
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void LL_EXTI_ClearFlag_32_63(uint32_t ExtiLine)
|
||
|
|
{
|
||
|
|
WRITE_REG(EXTI->PR2, ExtiLine);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
#if defined(USE_FULL_LL_DRIVER)
|
||
|
|
/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct);
|
||
|
|
uint32_t LL_EXTI_DeInit(void);
|
||
|
|
void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct);
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
#endif /* USE_FULL_LL_DRIVER */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
#endif /* EXTI */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif /* __STM32G4xx_LL_EXTI_H */
|
||
|
|
|