Sliders_McGee/Drivers/STM32G4xx_HAL_Driver/Inc/stm32g4xx_ll_system.h

1517 lines
58 KiB
C
Raw Normal View History

/**
******************************************************************************
* @file stm32g4xx_ll_system.h
* @author MCD Application Team
* @brief Header file of SYSTEM LL module.
******************************************************************************
* @attention
*
* Copyright (c) 2019 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
The LL SYSTEM driver contains a set of generic APIs that can be
used by user:
(+) Some of the FLASH features need to be handled in the SYSTEM file.
(+) Access to DBGCMU registers
(+) Access to SYSCFG registers
(+) Access to VREFBUF registers
@endverbatim
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32G4xx_LL_SYSTEM_H
#define __STM32G4xx_LL_SYSTEM_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g4xx.h"
/** @addtogroup STM32G4xx_LL_Driver
* @{
*/
#if defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) || defined (VREFBUF)
/** @defgroup SYSTEM_LL SYSTEM
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants
* @{
*/
/* Defines used for position in the register */
#define DBGMCU_REVID_POSITION (uint32_t)POSITION_VAL(DBGMCU_IDCODE_REV_ID)
/**
* @brief Power-down in Run mode Flash key
*/
#define FLASH_PDKEY1 0x04152637U /*!< Flash power down key1 */
#define FLASH_PDKEY2 0xFAFBFCFDU /*!< Flash power down key2: used with FLASH_PDKEY1
to unlock the RUN_PD bit in FLASH_ACR */
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants
* @{
*/
/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG REMAP
* @{
*/
#define LL_SYSCFG_REMAP_FLASH 0x00000000U /*!< Main Flash memory mapped at 0x00000000 */
#define LL_SYSCFG_REMAP_SYSTEMFLASH SYSCFG_MEMRMP_MEM_MODE_0 /*!< System Flash memory mapped at 0x00000000 */
#define LL_SYSCFG_REMAP_SRAM (SYSCFG_MEMRMP_MEM_MODE_1 | SYSCFG_MEMRMP_MEM_MODE_0) /*!< SRAM1 mapped at 0x00000000 */
#if defined(FMC_Bank1_R)
#define LL_SYSCFG_REMAP_FMC SYSCFG_MEMRMP_MEM_MODE_1 /*!< FMC bank 1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 */
#endif /* FMC_Bank1_R */
#define LL_SYSCFG_REMAP_QUADSPI (SYSCFG_MEMRMP_MEM_MODE_2 | SYSCFG_MEMRMP_MEM_MODE_1) /*!< QUADSPI memory mapped at 0x00000000 */
/**
* @}
*/
#if defined(SYSCFG_MEMRMP_FB_MODE)
/** @defgroup SYSTEM_LL_EC_BANKMODE SYSCFG BANK MODE
* @{
*/
#define LL_SYSCFG_BANKMODE_BANK1 0x00000000U /*!< Flash Bank1 mapped at 0x08000000 (and aliased @0x00000000)
and Flash Bank2 mapped at 0x08040000 (and aliased at 0x00080000) */
#define LL_SYSCFG_BANKMODE_BANK2 SYSCFG_MEMRMP_FB_MODE /*!< Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000)
and Flash Bank1 mapped at 0x08040000 (and aliased at 0x00080000) */
/**
* @}
*/
#endif /* SYSCFG_MEMRMP_FB_MODE */
/** @defgroup SYSTEM_LL_EC_I2C_FASTMODEPLUS SYSCFG I2C FASTMODEPLUS
* @{
*/
#define LL_SYSCFG_I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */
#define LL_SYSCFG_I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */
#if defined(SYSCFG_CFGR1_I2C_PB8_FMP)
#define LL_SYSCFG_I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */
#endif /* SYSCFG_CFGR1_I2C_PB8_FMP */
#if defined(SYSCFG_CFGR1_I2C_PB9_FMP)
#define LL_SYSCFG_I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */
#endif /* SYSCFG_CFGR1_I2C_PB9_FMP */
#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */
#if defined(I2C2)
#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */
#endif /* I2C2 */
#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */
#if defined(I2C4)
#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C4 SYSCFG_CFGR1_I2C4_FMP /*!< Enable Fast Mode Plus on I2C4 pins */
#endif /* I2C4 */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_EXTI_PORT SYSCFG EXTI PORT
* @{
*/
#define LL_SYSCFG_EXTI_PORTA 0U /*!< EXTI PORT A */
#define LL_SYSCFG_EXTI_PORTB 1U /*!< EXTI PORT B */
#define LL_SYSCFG_EXTI_PORTC 2U /*!< EXTI PORT C */
#define LL_SYSCFG_EXTI_PORTD 3U /*!< EXTI PORT D */
#define LL_SYSCFG_EXTI_PORTE 4U /*!< EXTI PORT E */
#define LL_SYSCFG_EXTI_PORTF 5U /*!< EXTI PORT F */
#define LL_SYSCFG_EXTI_PORTG 6U /*!< EXTI PORT G */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_EXTI_LINE SYSCFG EXTI LINE
* @{
*/
#define LL_SYSCFG_EXTI_LINE0 (uint32_t)((0x000FU << 16U) | 0U) /* !< EXTI_POSITION_0 | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE1 (uint32_t)((0x00F0U << 16U) | 0U) /* !< EXTI_POSITION_4 | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE2 (uint32_t)((0x0F00U << 16U) | 0U) /* !< EXTI_POSITION_8 | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE3 (uint32_t)((0xF000U << 16U) | 0U) /* !< EXTI_POSITION_12 | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE4 (uint32_t)((0x000FU << 16U) | 1U) /* !< EXTI_POSITION_0 | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE5 (uint32_t)((0x00F0U << 16U) | 1U) /* !< EXTI_POSITION_4 | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE6 (uint32_t)((0x0F00U << 16U) | 1U) /* !< EXTI_POSITION_8 | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE7 (uint32_t)((0xF000U << 16U) | 1U) /* !< EXTI_POSITION_12 | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE8 (uint32_t)((0x000FU << 16U) | 2U) /* !< EXTI_POSITION_0 | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE9 (uint32_t)((0x00F0U << 16U) | 2U) /* !< EXTI_POSITION_4 | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE10 (uint32_t)((0x0F00U << 16U) | 2U) /* !< EXTI_POSITION_8 | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE11 (uint32_t)((0xF000U << 16U) | 2U) /* !< EXTI_POSITION_12 | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE12 (uint32_t)((0x000FU << 16U) | 3U) /* !< EXTI_POSITION_0 | EXTICR[3] */
#define LL_SYSCFG_EXTI_LINE13 (uint32_t)((0x00F0U << 16U) | 3U) /* !< EXTI_POSITION_4 | EXTICR[3] */
#define LL_SYSCFG_EXTI_LINE14 (uint32_t)((0x0F00U << 16U) | 3U) /* !< EXTI_POSITION_8 | EXTICR[3] */
#define LL_SYSCFG_EXTI_LINE15 (uint32_t)((0xF000U << 16U) | 3U) /* !< EXTI_POSITION_12 | EXTICR[3] */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_TIMBREAK SYSCFG TIMER BREAK
* @{
*/
#define LL_SYSCFG_TIMBREAK_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC error signal
with Break Input of TIM1/8/15/16/17 */
#define LL_SYSCFG_TIMBREAK_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection
with TIM1/8/15/16/17 Break Input
and also the PVDE and PLS bits of the Power Control Interface */
#define LL_SYSCFG_TIMBREAK_SRAM_PARITY SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM_PARITY error signal
with Break Input of TIM1/8/15/16/17 */
#define LL_SYSCFG_TIMBREAK_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM4
with Break Input of TIM1/15/16/17 */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_CCMSRAMWRP SYSCFG CCMSRAM WRP
* @{
*/
#define LL_SYSCFG_CCMSRAMWRP_PAGE0 SYSCFG_SWPR_PAGE0 /*!< CCMSRAM Write protection page 0 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE1 SYSCFG_SWPR_PAGE1 /*!< CCMSRAM Write protection page 1 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE2 SYSCFG_SWPR_PAGE2 /*!< CCMSRAM Write protection page 2 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE3 SYSCFG_SWPR_PAGE3 /*!< CCMSRAM Write protection page 3 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE4 SYSCFG_SWPR_PAGE4 /*!< CCMSRAM Write protection page 4 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE5 SYSCFG_SWPR_PAGE5 /*!< CCMSRAM Write protection page 5 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE6 SYSCFG_SWPR_PAGE6 /*!< CCMSRAM Write protection page 6 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE7 SYSCFG_SWPR_PAGE7 /*!< CCMSRAM Write protection page 7 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE8 SYSCFG_SWPR_PAGE8 /*!< CCMSRAM Write protection page 8 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE9 SYSCFG_SWPR_PAGE9 /*!< CCMSRAM Write protection page 9 */
#if defined(SYSCFG_SWPR_PAGE10)
#define LL_SYSCFG_CCMSRAMWRP_PAGE10 SYSCFG_SWPR_PAGE10 /*!< CCMSRAM Write protection page 10 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE11 SYSCFG_SWPR_PAGE11 /*!< CCMSRAM Write protection page 11 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE12 SYSCFG_SWPR_PAGE12 /*!< CCMSRAM Write protection page 12 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE13 SYSCFG_SWPR_PAGE13 /*!< CCMSRAM Write protection page 13 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE14 SYSCFG_SWPR_PAGE14 /*!< CCMSRAM Write protection page 14 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE15 SYSCFG_SWPR_PAGE15 /*!< CCMSRAM Write protection page 15 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE16 SYSCFG_SWPR_PAGE16 /*!< CCMSRAM Write protection page 16 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE17 SYSCFG_SWPR_PAGE17 /*!< CCMSRAM Write protection page 17 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE18 SYSCFG_SWPR_PAGE18 /*!< CCMSRAM Write protection page 18 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE19 SYSCFG_SWPR_PAGE19 /*!< CCMSRAM Write protection page 19 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE20 SYSCFG_SWPR_PAGE20 /*!< CCMSRAM Write protection page 20 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE21 SYSCFG_SWPR_PAGE21 /*!< CCMSRAM Write protection page 21 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE22 SYSCFG_SWPR_PAGE22 /*!< CCMSRAM Write protection page 22 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE23 SYSCFG_SWPR_PAGE23 /*!< CCMSRAM Write protection page 23 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE24 SYSCFG_SWPR_PAGE24 /*!< CCMSRAM Write protection page 24 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE25 SYSCFG_SWPR_PAGE25 /*!< CCMSRAM Write protection page 25 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE26 SYSCFG_SWPR_PAGE26 /*!< CCMSRAM Write protection page 26 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE27 SYSCFG_SWPR_PAGE27 /*!< CCMSRAM Write protection page 27 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE28 SYSCFG_SWPR_PAGE28 /*!< CCMSRAM Write protection page 28 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE29 SYSCFG_SWPR_PAGE29 /*!< CCMSRAM Write protection page 29 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE30 SYSCFG_SWPR_PAGE30 /*!< CCMSRAM Write protection page 30 */
#define LL_SYSCFG_CCMSRAMWRP_PAGE31 SYSCFG_SWPR_PAGE31 /*!< CCMSRAM Write protection page 31 */
#endif /* SYSCFG_SWPR_PAGE10 */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_TRACE DBGMCU TRACE Pin Assignment
* @{
*/
#define LL_DBGMCU_TRACE_NONE 0x00000000U /*!< TRACE pins not assigned (default state) */
#define LL_DBGMCU_TRACE_ASYNCH DBGMCU_CR_TRACE_IOEN /*!< TRACE pin assignment for Asynchronous Mode */
#define LL_DBGMCU_TRACE_SYNCH_SIZE1 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_0) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 1 */
#define LL_DBGMCU_TRACE_SYNCH_SIZE2 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_1) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 2 */
#define LL_DBGMCU_TRACE_SYNCH_SIZE4 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 4 */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP
* @{
*/
#define LL_DBGMCU_APB1_GRP1_TIM2_STOP DBGMCU_APB1FZR1_DBG_TIM2_STOP /*!< The counter clock of TIM2 is stopped when the core is halted*/
#if defined(TIM3)
#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBGMCU_APB1FZR1_DBG_TIM3_STOP /*!< The counter clock of TIM3 is stopped when the core is halted*/
#endif /* TIM3 */
#if defined(TIM4)
#define LL_DBGMCU_APB1_GRP1_TIM4_STOP DBGMCU_APB1FZR1_DBG_TIM4_STOP /*!< The counter clock of TIM4 is stopped when the core is halted*/
#endif /* TIM4 */
#if defined(TIM5)
#define LL_DBGMCU_APB1_GRP1_TIM5_STOP DBGMCU_APB1FZR1_DBG_TIM5_STOP /*!< The counter clock of TIM5 is stopped when the core is halted*/
#endif /* TIM5 */
#define LL_DBGMCU_APB1_GRP1_TIM6_STOP DBGMCU_APB1FZR1_DBG_TIM6_STOP /*!< The counter clock of TIM6 is stopped when the core is halted*/
#if defined(TIM7)
#define LL_DBGMCU_APB1_GRP1_TIM7_STOP DBGMCU_APB1FZR1_DBG_TIM7_STOP /*!< The counter clock of TIM7 is stopped when the core is halted*/
#endif /* TIM7 */
#define LL_DBGMCU_APB1_GRP1_RTC_STOP DBGMCU_APB1FZR1_DBG_RTC_STOP /*!< The clock of the RTC counter is stopped when the core is halted*/
#define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBGMCU_APB1FZR1_DBG_WWDG_STOP /*!< The window watchdog counter clock is stopped when the core is halted*/
#define LL_DBGMCU_APB1_GRP1_IWDG_STOP DBGMCU_APB1FZR1_DBG_IWDG_STOP /*!< The independent watchdog counter clock is stopped when the core is halted*/
#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_APB1FZR1_DBG_I2C1_STOP /*!< The I2C1 SMBus timeout is frozen*/
#if defined(I2C2)
#define LL_DBGMCU_APB1_GRP1_I2C2_STOP DBGMCU_APB1FZR1_DBG_I2C2_STOP /*!< The I2C2 SMBus timeout is frozen*/
#endif /* I2C2 */
#define LL_DBGMCU_APB1_GRP1_I2C3_STOP DBGMCU_APB1FZR1_DBG_I2C3_STOP /*!< The I2C3 SMBus timeout is frozen*/
#define LL_DBGMCU_APB1_GRP1_LPTIM1_STOP DBGMCU_APB1FZR1_DBG_LPTIM1_STOP /*!< The counter clock of LPTIM1 is stopped when the core is halted*/
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_APB1_GRP2_STOP_IP DBGMCU APB1 GRP2 STOP IP
* @{
*/
#if defined(I2C4)
#define LL_DBGMCU_APB1_GRP2_I2C4_STOP DBGMCU_APB1FZR2_DBG_I2C4_STOP /*!< The I2C4 SMBus timeout is frozen*/
#endif /* I2C4 */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP
* @{
*/
#define LL_DBGMCU_APB2_GRP1_TIM1_STOP DBGMCU_APB2FZ_DBG_TIM1_STOP /*!< The counter clock of TIM1 is stopped when the core is halted*/
#if defined(TIM8)
#define LL_DBGMCU_APB2_GRP1_TIM8_STOP DBGMCU_APB2FZ_DBG_TIM8_STOP /*!< The counter clock of TIM8 is stopped when the core is halted*/
#endif /* TIM8 */
#define LL_DBGMCU_APB2_GRP1_TIM15_STOP DBGMCU_APB2FZ_DBG_TIM15_STOP /*!< The counter clock of TIM15 is stopped when the core is halted*/
#define LL_DBGMCU_APB2_GRP1_TIM16_STOP DBGMCU_APB2FZ_DBG_TIM16_STOP /*!< The counter clock of TIM16 is stopped when the core is halted*/
#if defined(TIM17)
#define LL_DBGMCU_APB2_GRP1_TIM17_STOP DBGMCU_APB2FZ_DBG_TIM17_STOP /*!< The counter clock of TIM17 is stopped when the core is halted*/
#endif /* TIM17 */
#if defined(TIM20)
#define LL_DBGMCU_APB2_GRP1_TIM20_STOP DBGMCU_APB2FZ_DBG_TIM20_STOP /*!< The counter clock of TIM20 is stopped when the core is halted*/
#endif /* TIM20 */
#if defined(HRTIM1)
#define LL_DBGMCU_APB2_GRP1_HRTIM1_STOP DBGMCU_APB2FZ_DBG_HRTIM1_STOP /*!< The counter clock of HRTIM1 is stopped when the core is halted*/
#endif /* HRTIM1 */
/**
* @}
*/
#if defined(VREFBUF)
/** @defgroup SYSTEM_LL_EC_VOLTAGE VREFBUF VOLTAGE
* @{
*/
#define LL_VREFBUF_VOLTAGE_SCALE0 ((uint32_t)0x00000000) /*!< Voltage reference scale 0 (VREFBUF_OUT = 2.048V) */
#define LL_VREFBUF_VOLTAGE_SCALE1 VREFBUF_CSR_VRS_0 /*!< Voltage reference scale 1 (VREFBUF_OUT = 2.5V) */
#define LL_VREFBUF_VOLTAGE_SCALE2 VREFBUF_CSR_VRS_1 /*!< Voltage reference scale 2 (VREFBUF_OUT = 2.9V) */
/**
* @}
*/
#endif /* VREFBUF */
/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY
* @{
*/
#define LL_FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero wait state */
#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One wait state */
#define LL_FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two wait states */
#define LL_FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three wait states */
#define LL_FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four wait states */
#if defined(FLASH_ACR_LATENCY_5WS)
#define LL_FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH five wait state */
#define LL_FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH six wait state */
#define LL_FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH seven wait states */
#define LL_FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH eight wait states */
#define LL_FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH nine wait states */
#define LL_FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH ten wait states */
#define LL_FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH eleven wait states */
#define LL_FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH twelve wait states */
#define LL_FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH thirteen wait states */
#define LL_FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH fourteen wait states */
#define LL_FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH fifteen wait states */
#endif /* FLASH_ACR_LATENCY_5WS */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions
* @{
*/
/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG
* @{
*/
/**
* @brief Set memory mapping at address 0x00000000
* @rmtoll SYSCFG_MEMRMP MEM_MODE LL_SYSCFG_SetRemapMemory
* @param Memory This parameter can be one of the following values:
* @arg @ref LL_SYSCFG_REMAP_FLASH
* @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH
* @arg @ref LL_SYSCFG_REMAP_SRAM
* @arg @ref LL_SYSCFG_REMAP_FMC (*)
* @arg @ref LL_SYSCFG_REMAP_QUADSPI (*)
*
* (*) value not defined in all devices
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_SetRemapMemory(uint32_t Memory)
{
MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, Memory);
}
/**
* @brief Get memory mapping at address 0x00000000
* @rmtoll SYSCFG_MEMRMP MEM_MODE LL_SYSCFG_GetRemapMemory
* @retval Returned value can be one of the following values:
* @arg @ref LL_SYSCFG_REMAP_FLASH
* @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH
* @arg @ref LL_SYSCFG_REMAP_SRAM
* @arg @ref LL_SYSCFG_REMAP_FMC (*)
* @arg @ref LL_SYSCFG_REMAP_QUADSPI (*)
*
* (*) value not defined in all devices
*/
__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemory(void)
{
return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE));
}
#if defined(SYSCFG_MEMRMP_FB_MODE)
/**
* @brief Select Flash bank mode (Bank flashed at 0x08000000)
* @rmtoll SYSCFG_MEMRMP FB_MODE LL_SYSCFG_SetFlashBankMode
* @param Bank This parameter can be one of the following values:
* @arg @ref LL_SYSCFG_BANKMODE_BANK1
* @arg @ref LL_SYSCFG_BANKMODE_BANK2
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_SetFlashBankMode(uint32_t Bank)
{
MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_FB_MODE, Bank);
}
/**
* @brief Get Flash bank mode (Bank flashed at 0x08000000)
* @rmtoll SYSCFG_MEMRMP FB_MODE LL_SYSCFG_GetFlashBankMode
* @retval Returned value can be one of the following values:
* @arg @ref LL_SYSCFG_BANKMODE_BANK1
* @arg @ref LL_SYSCFG_BANKMODE_BANK2
*/
__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashBankMode(void)
{
return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_FB_MODE));
}
#endif /* SYSCFG_MEMRMP_FB_MODE */
/**
* @brief Enable I/O analog switch voltage booster.
* @note When voltage booster is enabled, I/O analog switches are supplied
* by a dedicated voltage booster, from VDD power domain. This is
* the recommended configuration with low VDDA voltage operation.
* @note The I/O analog switch voltage booster is relevant for peripherals
* using I/O in analog input: ADC, COMP, OPAMP.
* However, COMP and OPAMP inputs have a high impedance and
* voltage booster do not impact performance significantly.
* Therefore, the voltage booster is mainly intended for
* usage with ADC.
* @rmtoll SYSCFG_CFGR1 BOOSTEN LL_SYSCFG_EnableAnalogBooster
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableAnalogBooster(void)
{
SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN);
}
/**
* @brief Disable I/O analog switch voltage booster.
* @note When voltage booster is enabled, I/O analog switches are supplied
* by a dedicated voltage booster, from VDD power domain. This is
* the recommended configuration with low VDDA voltage operation.
* @note The I/O analog switch voltage booster is relevant for peripherals
* using I/O in analog input: ADC, COMP, OPAMP.
* However, COMP and OPAMP inputs have a high impedance and
* voltage booster do not impact performance significantly.
* Therefore, the voltage booster is mainly intended for
* usage with ADC.
* @rmtoll SYSCFG_CFGR1 BOOSTEN LL_SYSCFG_DisableAnalogBooster
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableAnalogBooster(void)
{
CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN);
}
/**
* @brief Enable the I2C fast mode plus driving capability.
* @rmtoll SYSCFG_CFGR1 I2C_PBx_FMP LL_SYSCFG_EnableFastModePlus\n
* SYSCFG_CFGR1 I2Cx_FMP LL_SYSCFG_EnableFastModePlus
* @param ConfigFastModePlus This parameter can be a combination of the following values:
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 (*)
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 (*)
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*)
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C4 (*)
*
* (*) value not defined in all devices
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableFastModePlus(uint32_t ConfigFastModePlus)
{
SET_BIT(SYSCFG->CFGR1, ConfigFastModePlus);
}
/**
* @brief Disable the I2C fast mode plus driving capability.
* @rmtoll SYSCFG_CFGR1 I2C_PBx_FMP LL_SYSCFG_DisableFastModePlus\n
* SYSCFG_CFGR1 I2Cx_FMP LL_SYSCFG_DisableFastModePlus
* @param ConfigFastModePlus This parameter can be a combination of the following values:
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 (*)
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 (*)
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*)
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C4 (*)
*
* (*) value not defined in all devices
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableFastModePlus(uint32_t ConfigFastModePlus)
{
CLEAR_BIT(SYSCFG->CFGR1, ConfigFastModePlus);
}
/**
* @brief Enable Floating Point Unit Invalid operation Interrupt
* @rmtoll SYSCFG_CFGR1 FPU_IE_0 LL_SYSCFG_EnableIT_FPU_IOC
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_IOC(void)
{
SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_0);
}
/**
* @brief Enable Floating Point Unit Divide-by-zero Interrupt
* @rmtoll SYSCFG_CFGR1 FPU_IE_1 LL_SYSCFG_EnableIT_FPU_DZC
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_DZC(void)
{
SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_1);
}
/**
* @brief Enable Floating Point Unit Underflow Interrupt
* @rmtoll SYSCFG_CFGR1 FPU_IE_2 LL_SYSCFG_EnableIT_FPU_UFC
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_UFC(void)
{
SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_2);
}
/**
* @brief Enable Floating Point Unit Overflow Interrupt
* @rmtoll SYSCFG_CFGR1 FPU_IE_3 LL_SYSCFG_EnableIT_FPU_OFC
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_OFC(void)
{
SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_3);
}
/**
* @brief Enable Floating Point Unit Input denormal Interrupt
* @rmtoll SYSCFG_CFGR1 FPU_IE_4 LL_SYSCFG_EnableIT_FPU_IDC
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_IDC(void)
{
SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_4);
}
/**
* @brief Enable Floating Point Unit Inexact Interrupt
* @rmtoll SYSCFG_CFGR1 FPU_IE_5 LL_SYSCFG_EnableIT_FPU_IXC
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_IXC(void)
{
SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_5);
}
/**
* @brief Disable Floating Point Unit Invalid operation Interrupt
* @rmtoll SYSCFG_CFGR1 FPU_IE_0 LL_SYSCFG_DisableIT_FPU_IOC
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_IOC(void)
{
CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_0);
}
/**
* @brief Disable Floating Point Unit Divide-by-zero Interrupt
* @rmtoll SYSCFG_CFGR1 FPU_IE_1 LL_SYSCFG_DisableIT_FPU_DZC
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_DZC(void)
{
CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_1);
}
/**
* @brief Disable Floating Point Unit Underflow Interrupt
* @rmtoll SYSCFG_CFGR1 FPU_IE_2 LL_SYSCFG_DisableIT_FPU_UFC
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_UFC(void)
{
CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_2);
}
/**
* @brief Disable Floating Point Unit Overflow Interrupt
* @rmtoll SYSCFG_CFGR1 FPU_IE_3 LL_SYSCFG_DisableIT_FPU_OFC
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_OFC(void)
{
CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_3);
}
/**
* @brief Disable Floating Point Unit Input denormal Interrupt
* @rmtoll SYSCFG_CFGR1 FPU_IE_4 LL_SYSCFG_DisableIT_FPU_IDC
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_IDC(void)
{
CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_4);
}
/**
* @brief Disable Floating Point Unit Inexact Interrupt
* @rmtoll SYSCFG_CFGR1 FPU_IE_5 LL_SYSCFG_DisableIT_FPU_IXC
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_IXC(void)
{
CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_5);
}
/**
* @brief Check if Floating Point Unit Invalid operation Interrupt source is enabled or disabled.
* @rmtoll SYSCFG_CFGR1 FPU_IE_0 LL_SYSCFG_IsEnabledIT_FPU_IOC
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_IOC(void)
{
return ((READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_0) == (SYSCFG_CFGR1_FPU_IE_0)) ? 1UL : 0UL);
}
/**
* @brief Check if Floating Point Unit Divide-by-zero Interrupt source is enabled or disabled.
* @rmtoll SYSCFG_CFGR1 FPU_IE_1 LL_SYSCFG_IsEnabledIT_FPU_DZC
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_DZC(void)
{
return ((READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_1) == (SYSCFG_CFGR1_FPU_IE_1)) ? 1UL : 0UL);
}
/**
* @brief Check if Floating Point Unit Underflow Interrupt source is enabled or disabled.
* @rmtoll SYSCFG_CFGR1 FPU_IE_2 LL_SYSCFG_IsEnabledIT_FPU_UFC
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_UFC(void)
{
return ((READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_2) == (SYSCFG_CFGR1_FPU_IE_2)) ? 1UL : 0UL);
}
/**
* @brief Check if Floating Point Unit Overflow Interrupt source is enabled or disabled.
* @rmtoll SYSCFG_CFGR1 FPU_IE_3 LL_SYSCFG_IsEnabledIT_FPU_OFC
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_OFC(void)
{
return ((READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_3) == (SYSCFG_CFGR1_FPU_IE_3)) ? 1UL : 0UL);
}
/**
* @brief Check if Floating Point Unit Input denormal Interrupt source is enabled or disabled.
* @rmtoll SYSCFG_CFGR1 FPU_IE_4 LL_SYSCFG_IsEnabledIT_FPU_IDC
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_IDC(void)
{
return ((READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_4) == (SYSCFG_CFGR1_FPU_IE_4)) ? 1UL : 0UL);
}
/**
* @brief Check if Floating Point Unit Inexact Interrupt source is enabled or disabled.
* @rmtoll SYSCFG_CFGR1 FPU_IE_5 LL_SYSCFG_IsEnabledIT_FPU_IXC
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_IXC(void)
{
return ((READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_5) == (SYSCFG_CFGR1_FPU_IE_5)) ? 1UL : 0UL);
}
/**
* @brief Configure source input for the EXTI external interrupt.
* @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR2 EXTIx LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR3 EXTIx LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR4 EXTIx LL_SYSCFG_SetEXTISource
* @param Port This parameter can be one of the following values:
* @arg @ref LL_SYSCFG_EXTI_PORTA
* @arg @ref LL_SYSCFG_EXTI_PORTB
* @arg @ref LL_SYSCFG_EXTI_PORTC
* @arg @ref LL_SYSCFG_EXTI_PORTD
* @arg @ref LL_SYSCFG_EXTI_PORTE
* @arg @ref LL_SYSCFG_EXTI_PORTF
* @arg @ref LL_SYSCFG_EXTI_PORTG
*
* (*) value not defined in all devices
* @param Line This parameter can be one of the following values:
* @arg @ref LL_SYSCFG_EXTI_LINE0
* @arg @ref LL_SYSCFG_EXTI_LINE1
* @arg @ref LL_SYSCFG_EXTI_LINE2
* @arg @ref LL_SYSCFG_EXTI_LINE3
* @arg @ref LL_SYSCFG_EXTI_LINE4
* @arg @ref LL_SYSCFG_EXTI_LINE5
* @arg @ref LL_SYSCFG_EXTI_LINE6
* @arg @ref LL_SYSCFG_EXTI_LINE7
* @arg @ref LL_SYSCFG_EXTI_LINE8
* @arg @ref LL_SYSCFG_EXTI_LINE9
* @arg @ref LL_SYSCFG_EXTI_LINE10
* @arg @ref LL_SYSCFG_EXTI_LINE11
* @arg @ref LL_SYSCFG_EXTI_LINE12
* @arg @ref LL_SYSCFG_EXTI_LINE13
* @arg @ref LL_SYSCFG_EXTI_LINE14
* @arg @ref LL_SYSCFG_EXTI_LINE15
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_SetEXTISource(uint32_t Port, uint32_t Line)
{
MODIFY_REG(SYSCFG->EXTICR[Line & 0x3U], (Line >> 16U), Port << (POSITION_VAL((Line >> 16U)) & 0x1FU) );
}
/**
* @brief Get the configured defined for specific EXTI Line
* @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR2 EXTIx LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR3 EXTIx LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR4 EXTIx LL_SYSCFG_GetEXTISource
* @param Line This parameter can be one of the following values:
* @arg @ref LL_SYSCFG_EXTI_LINE0
* @arg @ref LL_SYSCFG_EXTI_LINE1
* @arg @ref LL_SYSCFG_EXTI_LINE2
* @arg @ref LL_SYSCFG_EXTI_LINE3
* @arg @ref LL_SYSCFG_EXTI_LINE4
* @arg @ref LL_SYSCFG_EXTI_LINE5
* @arg @ref LL_SYSCFG_EXTI_LINE6
* @arg @ref LL_SYSCFG_EXTI_LINE7
* @arg @ref LL_SYSCFG_EXTI_LINE8
* @arg @ref LL_SYSCFG_EXTI_LINE9
* @arg @ref LL_SYSCFG_EXTI_LINE10
* @arg @ref LL_SYSCFG_EXTI_LINE11
* @arg @ref LL_SYSCFG_EXTI_LINE12
* @arg @ref LL_SYSCFG_EXTI_LINE13
* @arg @ref LL_SYSCFG_EXTI_LINE14
* @arg @ref LL_SYSCFG_EXTI_LINE15
* @retval Returned value can be one of the following values:
* @arg @ref LL_SYSCFG_EXTI_PORTA
* @arg @ref LL_SYSCFG_EXTI_PORTB
* @arg @ref LL_SYSCFG_EXTI_PORTC
* @arg @ref LL_SYSCFG_EXTI_PORTD
* @arg @ref LL_SYSCFG_EXTI_PORTE
* @arg @ref LL_SYSCFG_EXTI_PORTF
* @arg @ref LL_SYSCFG_EXTI_PORTG
*
* (*) value not defined in all devices
*/
__STATIC_INLINE uint32_t LL_SYSCFG_GetEXTISource(uint32_t Line)
{
return (uint32_t)(READ_BIT(SYSCFG->EXTICR[Line & 0x3U], (Line >> 16U)) >> (POSITION_VAL(Line >> 16U) & 0x1FU));
}
/**
* @brief Enable CCMSRAM Erase (starts a hardware CCMSRAM erase operation. This bit is
* automatically cleared at the end of the CCMSRAM erase operation.)
* @note This bit is write-protected: setting this bit is possible only after the
* correct key sequence is written in the SYSCFG_SKR register as described in
* the Reference Manual.
* @rmtoll SYSCFG_SCSR CCMER LL_SYSCFG_EnableCCMSRAMErase
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableCCMSRAMErase(void)
{
/* Starts a hardware CCMSRAM erase operation*/
SET_BIT(SYSCFG->SCSR, SYSCFG_SCSR_CCMER);
}
/**
* @brief Check if CCMSRAM erase operation is on going
* @rmtoll SYSCFG_SCSR CCMBSY LL_SYSCFG_IsCCMSRAMEraseOngoing
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSCFG_IsCCMSRAMEraseOngoing(void)
{
return ((READ_BIT(SYSCFG->SCSR, SYSCFG_SCSR_CCMBSY) == (SYSCFG_SCSR_CCMBSY)) ? 1UL : 0UL);
}
/**
* @brief Set connections to TIM1/8/15/16/17 Break inputs
* @rmtoll SYSCFG_CFGR2 CLL LL_SYSCFG_SetTIMBreakInputs\n
* SYSCFG_CFGR2 SPL LL_SYSCFG_SetTIMBreakInputs\n
* SYSCFG_CFGR2 PVDL LL_SYSCFG_SetTIMBreakInputs\n
* SYSCFG_CFGR2 ECCL LL_SYSCFG_SetTIMBreakInputs
* @param Break This parameter can be a combination of the following values:
* @arg @ref LL_SYSCFG_TIMBREAK_ECC
* @arg @ref LL_SYSCFG_TIMBREAK_PVD
* @arg @ref LL_SYSCFG_TIMBREAK_SRAM_PARITY
* @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_SetTIMBreakInputs(uint32_t Break)
{
MODIFY_REG(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL | SYSCFG_CFGR2_SPL | SYSCFG_CFGR2_PVDL | SYSCFG_CFGR2_ECCL, Break);
}
/**
* @brief Get connections to TIM1/8/15/16/17 Break inputs
* @rmtoll SYSCFG_CFGR2 CLL LL_SYSCFG_GetTIMBreakInputs\n
* SYSCFG_CFGR2 SPL LL_SYSCFG_GetTIMBreakInputs\n
* SYSCFG_CFGR2 PVDL LL_SYSCFG_GetTIMBreakInputs\n
* SYSCFG_CFGR2 ECCL LL_SYSCFG_GetTIMBreakInputs
* @retval Returned value can be can be a combination of the following values:
* @arg @ref LL_SYSCFG_TIMBREAK_ECC
* @arg @ref LL_SYSCFG_TIMBREAK_PVD
* @arg @ref LL_SYSCFG_TIMBREAK_SRAM_PARITY
* @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP
*/
__STATIC_INLINE uint32_t LL_SYSCFG_GetTIMBreakInputs(void)
{
return (uint32_t)(READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL | SYSCFG_CFGR2_SPL | SYSCFG_CFGR2_PVDL | SYSCFG_CFGR2_ECCL));
}
/**
* @brief Check if SRAM parity error detected
* @rmtoll SYSCFG_CFGR2 SPF LL_SYSCFG_IsActiveFlag_SP
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_SP(void)
{
return ((READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPF) == (SYSCFG_CFGR2_SPF)) ? 1UL : 0UL);
}
/**
* @brief Clear SRAM parity error flag
* @rmtoll SYSCFG_CFGR2 SPF LL_SYSCFG_ClearFlag_SP
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_ClearFlag_SP(void)
{
SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPF);
}
/**
* @brief Enable CCMSRAM page write protection
* @note Write protection is cleared only by a system reset
* @rmtoll SYSCFG_SWPR PAGEx LL_SYSCFG_EnableCCMSRAMPageWRP
* @param CCMSRAMWRP This parameter can be a combination of the following values:
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE0
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE1
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE2
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE3
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE4
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE5
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE6
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE7
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE8
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE9
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE10 (*)
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE11 (*)
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE12 (*)
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE13 (*)
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE14 (*)
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE15 (*)
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE16 (*)
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE17 (*)
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE18 (*)
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE19 (*)
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE20 (*)
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE21 (*)
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE22 (*)
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE23 (*)
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE24 (*)
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE25 (*)
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE26 (*)
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE27 (*)
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE28 (*)
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE29 (*)
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE30 (*)
* @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE31 (*)
*
* (*) value not defined in all devices
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableCCMSRAMPageWRP(uint32_t CCMSRAMWRP)
{
SET_BIT(SYSCFG->SWPR, CCMSRAMWRP);
}
/**
* @brief CCMSRAM page write protection lock prior to erase
* @rmtoll SYSCFG_SKR KEY LL_SYSCFG_LockCCMSRAMWRP
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_LockCCMSRAMWRP(void)
{
/* Writing a wrong key reactivates the write protection */
WRITE_REG(SYSCFG->SKR, 0x00);
}
/**
* @brief CCMSRAM page write protection unlock prior to erase
* @rmtoll SYSCFG_SKR KEY LL_SYSCFG_UnlockCCMSRAMWRP
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_UnlockCCMSRAMWRP(void)
{
/* unlock the write protection of the CCMER bit */
WRITE_REG(SYSCFG->SKR, 0xCA);
WRITE_REG(SYSCFG->SKR, 0x53);
}
/**
* @}
*/
/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU
* @{
*/
/**
* @brief Return the device identifier
* @rmtoll DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID
* @retval Values between Min_Data=0x00 and Max_Data=0x0FFF (ex: device ID is 0x6415)
*/
__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void)
{
return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID));
}
/**
* @brief Return the device revision identifier
* @note This field indicates the revision of the device.
* @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID
* @retval Values between Min_Data=0x00 and Max_Data=0xFFFF
*/
__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void)
{
return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> (DBGMCU_REVID_POSITION & 0x1FU));
}
/**
* @brief Enable the Debug Module during SLEEP mode
* @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_EnableDBGSleepMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode(void)
{
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
}
/**
* @brief Disable the Debug Module during SLEEP mode
* @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_DisableDBGSleepMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode(void)
{
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
}
/**
* @brief Enable the Debug Module during STOP mode
* @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void)
{
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
}
/**
* @brief Disable the Debug Module during STOP mode
* @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void)
{
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
}
/**
* @brief Enable the Debug Module during STANDBY mode
* @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void)
{
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
}
/**
* @brief Disable the Debug Module during STANDBY mode
* @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void)
{
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
}
/**
* @brief Set Trace pin assignment control
* @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_SetTracePinAssignment\n
* DBGMCU_CR TRACE_MODE LL_DBGMCU_SetTracePinAssignment
* @param PinAssignment This parameter can be one of the following values:
* @arg @ref LL_DBGMCU_TRACE_NONE
* @arg @ref LL_DBGMCU_TRACE_ASYNCH
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_SetTracePinAssignment(uint32_t PinAssignment)
{
MODIFY_REG(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE, PinAssignment);
}
/**
* @brief Get Trace pin assignment control
* @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_GetTracePinAssignment\n
* DBGMCU_CR TRACE_MODE LL_DBGMCU_GetTracePinAssignment
* @retval Returned value can be one of the following values:
* @arg @ref LL_DBGMCU_TRACE_NONE
* @arg @ref LL_DBGMCU_TRACE_ASYNCH
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
*/
__STATIC_INLINE uint32_t LL_DBGMCU_GetTracePinAssignment(void)
{
return (uint32_t)(READ_BIT(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE));
}
/**
* @brief Freeze APB1 peripherals (group1 peripherals)
* @rmtoll DBGMCU_APB1FZR1 DBG_xxxx_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP (*)
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs)
{
SET_BIT(DBGMCU->APB1FZR1, Periphs);
}
/**
* @brief Freeze APB1 peripherals (group2 peripherals)
* @rmtoll DBGMCU_APB1FZR2 DBG_xxxx_STOP LL_DBGMCU_APB1_GRP2_FreezePeriph
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_DBGMCU_APB1_GRP2_I2C4_STOP (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_FreezePeriph(uint32_t Periphs)
{
SET_BIT(DBGMCU->APB1FZR2, Periphs);
}
/**
* @brief Unfreeze APB1 peripherals (group1 peripherals)
* @rmtoll DBGMCU_APB1FZR1 DBG_xxxx_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP (*)
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs)
{
CLEAR_BIT(DBGMCU->APB1FZR1, Periphs);
}
/**
* @brief Unfreeze APB1 peripherals (group2 peripherals)
* @rmtoll DBGMCU_APB1FZR2 DBG_xxxx_STOP LL_DBGMCU_APB1_GRP2_UnFreezePeriph
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_DBGMCU_APB1_GRP2_I2C4_STOP (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_UnFreezePeriph(uint32_t Periphs)
{
CLEAR_BIT(DBGMCU->APB1FZR2, Periphs);
}
/**
* @brief Freeze APB2 peripherals
* @rmtoll DBGMCU_APB2FZ DBG_TIMx_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM20_STOP (*)
* @arg @ref LL_DBGMCU_APB2_GRP1_HRTIM1_STOP (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs)
{
SET_BIT(DBGMCU->APB2FZ, Periphs);
}
/**
* @brief Unfreeze APB2 peripherals
* @rmtoll DBGMCU_APB2FZ DBG_TIMx_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM20_STOP (*)
* @arg @ref LL_DBGMCU_APB2_GRP1_HRTIM1_STOP (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs)
{
CLEAR_BIT(DBGMCU->APB2FZ, Periphs);
}
/**
* @}
*/
#if defined(VREFBUF)
/** @defgroup SYSTEM_LL_EF_VREFBUF VREFBUF
* @{
*/
/**
* @brief Enable Internal voltage reference
* @rmtoll VREFBUF_CSR ENVR LL_VREFBUF_Enable
* @retval None
*/
__STATIC_INLINE void LL_VREFBUF_Enable(void)
{
SET_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR);
}
/**
* @brief Disable Internal voltage reference
* @rmtoll VREFBUF_CSR ENVR LL_VREFBUF_Disable
* @retval None
*/
__STATIC_INLINE void LL_VREFBUF_Disable(void)
{
CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR);
}
/**
* @brief Enable high impedance (VREF+pin is high impedance)
* @rmtoll VREFBUF_CSR HIZ LL_VREFBUF_EnableHIZ
* @retval None
*/
__STATIC_INLINE void LL_VREFBUF_EnableHIZ(void)
{
SET_BIT(VREFBUF->CSR, VREFBUF_CSR_HIZ);
}
/**
* @brief Disable high impedance (VREF+pin is internally connected to the voltage reference buffer output)
* @rmtoll VREFBUF_CSR HIZ LL_VREFBUF_DisableHIZ
* @retval None
*/
__STATIC_INLINE void LL_VREFBUF_DisableHIZ(void)
{
CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_HIZ);
}
/**
* @brief Set the Voltage reference scale
* @rmtoll VREFBUF_CSR VRS LL_VREFBUF_SetVoltageScaling
* @param Scale This parameter can be one of the following values:
* @arg @ref LL_VREFBUF_VOLTAGE_SCALE0
* @arg @ref LL_VREFBUF_VOLTAGE_SCALE1
* @arg @ref LL_VREFBUF_VOLTAGE_SCALE2
* @retval None
*/
__STATIC_INLINE void LL_VREFBUF_SetVoltageScaling(uint32_t Scale)
{
MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_VRS, Scale);
}
/**
* @brief Get the Voltage reference scale
* @rmtoll VREFBUF_CSR VRS LL_VREFBUF_GetVoltageScaling
* @retval Returned value can be one of the following values:
* @arg @ref LL_VREFBUF_VOLTAGE_SCALE0
* @arg @ref LL_VREFBUF_VOLTAGE_SCALE1
* @arg @ref LL_VREFBUF_VOLTAGE_SCALE2
*/
__STATIC_INLINE uint32_t LL_VREFBUF_GetVoltageScaling(void)
{
return (uint32_t)(READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRS));
}
/**
* @brief Check if Voltage reference buffer is ready
* @rmtoll VREFBUF_CSR VRR LL_VREFBUF_IsVREFReady
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_VREFBUF_IsVREFReady(void)
{
return ((READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRR) == (VREFBUF_CSR_VRR)) ? 1UL : 0UL);
}
/**
* @brief Get the trimming code for VREFBUF calibration
* @rmtoll VREFBUF_CCR TRIM LL_VREFBUF_GetTrimming
* @retval Between 0 and 0x3F
*/
__STATIC_INLINE uint32_t LL_VREFBUF_GetTrimming(void)
{
return (uint32_t)(READ_BIT(VREFBUF->CCR, VREFBUF_CCR_TRIM));
}
/**
* @brief Set the trimming code for VREFBUF calibration (Tune the internal reference buffer voltage)
* @rmtoll VREFBUF_CCR TRIM LL_VREFBUF_SetTrimming
* @param Value Between 0 and 0x3F
* @retval None
*/
__STATIC_INLINE void LL_VREFBUF_SetTrimming(uint32_t Value)
{
WRITE_REG(VREFBUF->CCR, Value);
}
/**
* @}
*/
#endif /* VREFBUF */
/** @defgroup SYSTEM_LL_EF_FLASH FLASH
* @{
*/
/**
* @brief Set FLASH Latency
* @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency
* @param Latency This parameter can be one of the following values:
* @arg @ref LL_FLASH_LATENCY_0
* @arg @ref LL_FLASH_LATENCY_1
* @arg @ref LL_FLASH_LATENCY_2
* @arg @ref LL_FLASH_LATENCY_3
* @arg @ref LL_FLASH_LATENCY_4
* @arg @ref LL_FLASH_LATENCY_5 (*)
* @arg @ref LL_FLASH_LATENCY_6 (*)
* @arg @ref LL_FLASH_LATENCY_7 (*)
* @arg @ref LL_FLASH_LATENCY_8 (*)
* @arg @ref LL_FLASH_LATENCY_9 (*)
* @arg @ref LL_FLASH_LATENCY_10 (*)
* @arg @ref LL_FLASH_LATENCY_11 (*)
* @arg @ref LL_FLASH_LATENCY_12 (*)
* @arg @ref LL_FLASH_LATENCY_13 (*)
* @arg @ref LL_FLASH_LATENCY_14 (*)
* @arg @ref LL_FLASH_LATENCY_15 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency)
{
MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency);
}
/**
* @brief Get FLASH Latency
* @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency
* @retval Returned value can be one of the following values:
* @arg @ref LL_FLASH_LATENCY_0
* @arg @ref LL_FLASH_LATENCY_1
* @arg @ref LL_FLASH_LATENCY_2
* @arg @ref LL_FLASH_LATENCY_3
* @arg @ref LL_FLASH_LATENCY_4
* @arg @ref LL_FLASH_LATENCY_5 (*)
* @arg @ref LL_FLASH_LATENCY_6 (*)
* @arg @ref LL_FLASH_LATENCY_7 (*)
* @arg @ref LL_FLASH_LATENCY_8 (*)
* @arg @ref LL_FLASH_LATENCY_9 (*)
* @arg @ref LL_FLASH_LATENCY_10 (*)
* @arg @ref LL_FLASH_LATENCY_11 (*)
* @arg @ref LL_FLASH_LATENCY_12 (*)
* @arg @ref LL_FLASH_LATENCY_13 (*)
* @arg @ref LL_FLASH_LATENCY_14 (*)
* @arg @ref LL_FLASH_LATENCY_15 (*)
*
* (*) value not defined in all devices.
*/
__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void)
{
return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY));
}
/**
* @brief Enable Prefetch
* @rmtoll FLASH_ACR PRFTEN LL_FLASH_EnablePrefetch
* @retval None
*/
__STATIC_INLINE void LL_FLASH_EnablePrefetch(void)
{
SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN);
}
/**
* @brief Disable Prefetch
* @rmtoll FLASH_ACR PRFTEN LL_FLASH_DisablePrefetch
* @retval None
*/
__STATIC_INLINE void LL_FLASH_DisablePrefetch(void)
{
CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN);
}
/**
* @brief Check if Prefetch buffer is enabled
* @rmtoll FLASH_ACR PRFTEN LL_FLASH_IsPrefetchEnabled
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void)
{
return ((READ_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) == (FLASH_ACR_PRFTEN)) ? 1UL : 0UL);
}
/**
* @brief Enable Instruction cache
* @rmtoll FLASH_ACR ICEN LL_FLASH_EnableInstCache
* @retval None
*/
__STATIC_INLINE void LL_FLASH_EnableInstCache(void)
{
SET_BIT(FLASH->ACR, FLASH_ACR_ICEN);
}
/**
* @brief Disable Instruction cache
* @rmtoll FLASH_ACR ICEN LL_FLASH_DisableInstCache
* @retval None
*/
__STATIC_INLINE void LL_FLASH_DisableInstCache(void)
{
CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICEN);
}
/**
* @brief Enable Data cache
* @rmtoll FLASH_ACR DCEN LL_FLASH_EnableDataCache
* @retval None
*/
__STATIC_INLINE void LL_FLASH_EnableDataCache(void)
{
SET_BIT(FLASH->ACR, FLASH_ACR_DCEN);
}
/**
* @brief Disable Data cache
* @rmtoll FLASH_ACR DCEN LL_FLASH_DisableDataCache
* @retval None
*/
__STATIC_INLINE void LL_FLASH_DisableDataCache(void)
{
CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCEN);
}
/**
* @brief Enable Instruction cache reset
* @note bit can be written only when the instruction cache is disabled
* @rmtoll FLASH_ACR ICRST LL_FLASH_EnableInstCacheReset
* @retval None
*/
__STATIC_INLINE void LL_FLASH_EnableInstCacheReset(void)
{
SET_BIT(FLASH->ACR, FLASH_ACR_ICRST);
}
/**
* @brief Disable Instruction cache reset
* @rmtoll FLASH_ACR ICRST LL_FLASH_DisableInstCacheReset
* @retval None
*/
__STATIC_INLINE void LL_FLASH_DisableInstCacheReset(void)
{
CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICRST);
}
/**
* @brief Enable Data cache reset
* @note bit can be written only when the data cache is disabled
* @rmtoll FLASH_ACR DCRST LL_FLASH_EnableDataCacheReset
* @retval None
*/
__STATIC_INLINE void LL_FLASH_EnableDataCacheReset(void)
{
SET_BIT(FLASH->ACR, FLASH_ACR_DCRST);
}
/**
* @brief Disable Data cache reset
* @rmtoll FLASH_ACR DCRST LL_FLASH_DisableDataCacheReset
* @retval None
*/
__STATIC_INLINE void LL_FLASH_DisableDataCacheReset(void)
{
CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCRST);
}
/**
* @brief Enable Flash Power-down mode during run mode or Low-power run mode
* @note Flash memory can be put in power-down mode only when the code is executed
* from RAM
* @note Flash must not be accessed when power down is enabled
* @note Flash must not be put in power-down while a program or an erase operation
* is on-going
* @rmtoll FLASH_ACR RUN_PD LL_FLASH_EnableRunPowerDown\n
* FLASH_PDKEYR PDKEY1 LL_FLASH_EnableRunPowerDown\n
* FLASH_PDKEYR PDKEY2 LL_FLASH_EnableRunPowerDown
* @retval None
*/
__STATIC_INLINE void LL_FLASH_EnableRunPowerDown(void)
{
/* Following values must be written consecutively to unlock the RUN_PD bit in
FLASH_ACR */
WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY1);
WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY2);
SET_BIT(FLASH->ACR, FLASH_ACR_RUN_PD);
}
/**
* @brief Disable Flash Power-down mode during run mode or Low-power run mode
* @rmtoll FLASH_ACR RUN_PD LL_FLASH_DisableRunPowerDown\n
* FLASH_PDKEYR PDKEY1 LL_FLASH_DisableRunPowerDown\n
* FLASH_PDKEYR PDKEY2 LL_FLASH_DisableRunPowerDown
* @retval None
*/
__STATIC_INLINE void LL_FLASH_DisableRunPowerDown(void)
{
/* Following values must be written consecutively to unlock the RUN_PD bit in
FLASH_ACR */
WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY1);
WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY2);
CLEAR_BIT(FLASH->ACR, FLASH_ACR_RUN_PD);
}
/**
* @brief Enable Flash Power-down mode during Sleep or Low-power sleep mode
* @note Flash must not be put in power-down while a program or an erase operation
* is on-going
* @rmtoll FLASH_ACR SLEEP_PD LL_FLASH_EnableSleepPowerDown
* @retval None
*/
__STATIC_INLINE void LL_FLASH_EnableSleepPowerDown(void)
{
SET_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD);
}
/**
* @brief Disable Flash Power-down mode during Sleep or Low-power sleep mode
* @rmtoll FLASH_ACR SLEEP_PD LL_FLASH_DisableSleepPowerDown
* @retval None
*/
__STATIC_INLINE void LL_FLASH_DisableSleepPowerDown(void)
{
CLEAR_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) || defined (VREFBUF) */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32G4xx_LL_SYSTEM_H */