Sliders_McGee/Drivers/STM32G4xx_HAL_Driver/Inc/stm32g4xx_hal_flash.h

1019 lines
46 KiB
C
Raw Normal View History

/**
******************************************************************************
* @file stm32g4xx_hal_flash.h
* @author MCD Application Team
* @brief Header file of FLASH HAL module.
******************************************************************************
* @attention
*
* Copyright (c) 2019 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file in
* the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32G4xx_HAL_FLASH_H
#define STM32G4xx_HAL_FLASH_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g4xx_hal_def.h"
/** @addtogroup STM32G4xx_HAL_Driver
* @{
*/
/** @addtogroup FLASH
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup FLASH_Exported_Types FLASH Exported Types
* @{
*/
/**
* @brief FLASH Erase structure definition
*/
typedef struct
{
uint32_t TypeErase; /*!< Mass erase or page erase.
This parameter can be a value of @ref FLASH_Type_Erase */
uint32_t Banks; /*!< Select bank to erase.
This parameter must be a value of @ref FLASH_Banks
(FLASH_BANK_BOTH should be used only for mass erase) */
uint32_t Page; /*!< Initial Flash page to erase when page erase is disabled.
This parameter must be a value between 0 and (max number of pages in the bank - 1)
(eg : 127 for 512KB dual bank) */
uint32_t NbPages; /*!< Number of pages to be erased.
This parameter must be a value between 1 and (max number of pages in the bank - value of initial page)*/
} FLASH_EraseInitTypeDef;
/**
* @brief FLASH Option Bytes Program structure definition
*/
typedef struct
{
uint32_t OptionType; /*!< Option byte to be configured.
This parameter can be a combination of the values of @ref FLASH_OB_Type */
uint32_t WRPArea; /*!< Write protection area to be programmed (used for OPTIONBYTE_WRP).
Only one WRP area could be programmed at the same time.
This parameter can be value of @ref FLASH_OB_WRP_Area */
uint32_t WRPStartOffset; /*!< Write protection start offset (used for OPTIONBYTE_WRP).
This parameter must be a value between 0 and (max number of pages in the bank - 1) */
uint32_t WRPEndOffset; /*!< Write protection end offset (used for OPTIONBYTE_WRP).
This parameter must be a value between WRPStartOffset and (max number of pages in the bank - 1) */
uint32_t RDPLevel; /*!< Set the read protection level.. (used for OPTIONBYTE_RDP).
This parameter can be a value of @ref FLASH_OB_Read_Protection */
uint32_t USERType; /*!< User option byte(s) to be configured (used for OPTIONBYTE_USER).
This parameter can be a combination of @ref FLASH_OB_USER_Type */
uint32_t USERConfig; /*!< Value of the user option byte (used for OPTIONBYTE_USER).
This parameter can be a combination of @ref FLASH_OB_USER_BOR_LEVEL,
@ref FLASH_OB_USER_nRST_STOP, @ref FLASH_OB_USER_nRST_STANDBY,
@ref FLASH_OB_USER_nRST_SHUTDOWN, @ref FLASH_OB_USER_IWDG_SW,
@ref FLASH_OB_USER_IWDG_STOP, @ref FLASH_OB_USER_IWDG_STANDBY,
@ref FLASH_OB_USER_WWDG_SW, @ref FLASH_OB_USER_BFB2 (*),
@ref FLASH_OB_USER_nBOOT1, @ref FLASH_OB_USER_SRAM_PE,
@ref FLASH_OB_USER_CCMSRAM_RST
@note (*) availability depends on devices */
uint32_t PCROPConfig; /*!< Configuration of the PCROP (used for OPTIONBYTE_PCROP).
This parameter must be a combination of @ref FLASH_Banks (except FLASH_BANK_BOTH)
and @ref FLASH_OB_PCROP_RDP */
uint32_t PCROPStartAddr; /*!< PCROP Start address (used for OPTIONBYTE_PCROP).
This parameter must be a value between begin and end of bank
=> Be careful of the bank swapping for the address */
uint32_t PCROPEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP).
This parameter must be a value between PCROP Start address and end of bank */
uint32_t BootEntryPoint; /*!< Set the Boot Lock (used for OPTIONBYTE_BOOT_LOCK).
This parameter can be a value of @ref FLASH_OB_Boot_Lock */
uint32_t SecBank; /*!< Bank of securable memory area to be programmed (used for OPTIONBYTE_SEC).
Only one securable memory area could be programmed at the same time.
This parameter can be one of the following values:
FLASH_BANK_1: Securable memory area to be programmed in bank 1
FLASH_BANK_2: Securable memory area to be programmed in bank 2 (*)
@note (*) availability depends on devices */
uint32_t SecSize; /*!< Size of securable memory area to be programmed (used for OPTIONBYTE_SEC),
in number of pages. Securable memory area is starting from first page of the bank.
Only one securable memory could be programmed at the same time.
This parameter must be a value between 0 and (max number of pages in the bank - 1) */
} FLASH_OBProgramInitTypeDef;
/**
* @brief FLASH Procedure structure definition
*/
typedef enum
{
FLASH_PROC_NONE = 0,
FLASH_PROC_PAGE_ERASE,
FLASH_PROC_MASS_ERASE,
FLASH_PROC_PROGRAM,
FLASH_PROC_PROGRAM_LAST
} FLASH_ProcedureTypeDef;
/**
* @brief FLASH Cache structure definition
*/
typedef enum
{
FLASH_CACHE_DISABLED = 0,
FLASH_CACHE_ICACHE_ENABLED,
FLASH_CACHE_DCACHE_ENABLED,
FLASH_CACHE_ICACHE_DCACHE_ENABLED
} FLASH_CacheTypeDef;
/**
* @brief FLASH handle Structure definition
*/
typedef struct
{
HAL_LockTypeDef Lock; /* FLASH locking object */
__IO uint32_t ErrorCode; /* FLASH error code */
__IO FLASH_ProcedureTypeDef ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */
__IO uint32_t Address; /* Internal variable to save address selected for program in IT context */
__IO uint32_t Bank; /* Internal variable to save current bank selected during erase in IT context */
__IO uint32_t Page; /* Internal variable to define the current page which is erasing in IT context */
__IO uint32_t NbPagesToErase; /* Internal variable to save the remaining pages to erase in IT context */
__IO FLASH_CacheTypeDef CacheToReactivate; /* Internal variable to indicate which caches should be reactivated */
} FLASH_ProcessTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
* @{
*/
/** @defgroup FLASH_Error FLASH Error
* @{
*/
#define HAL_FLASH_ERROR_NONE 0x00000000U
#define HAL_FLASH_ERROR_OP FLASH_FLAG_OPERR
#define HAL_FLASH_ERROR_PROG FLASH_FLAG_PROGERR
#define HAL_FLASH_ERROR_WRP FLASH_FLAG_WRPERR
#define HAL_FLASH_ERROR_PGA FLASH_FLAG_PGAERR
#define HAL_FLASH_ERROR_SIZ FLASH_FLAG_SIZERR
#define HAL_FLASH_ERROR_PGS FLASH_FLAG_PGSERR
#define HAL_FLASH_ERROR_MIS FLASH_FLAG_MISERR
#define HAL_FLASH_ERROR_FAST FLASH_FLAG_FASTERR
#define HAL_FLASH_ERROR_RD FLASH_FLAG_RDERR
#define HAL_FLASH_ERROR_OPTV FLASH_FLAG_OPTVERR
#define HAL_FLASH_ERROR_ECCC FLASH_FLAG_ECCC
#define HAL_FLASH_ERROR_ECCD FLASH_FLAG_ECCD
#if defined (FLASH_OPTR_DBANK)
#define HAL_FLASH_ERROR_ECCC2 FLASH_FLAG_ECCC2
#define HAL_FLASH_ERROR_ECCD2 FLASH_FLAG_ECCD2
#endif
/**
* @}
*/
/** @defgroup FLASH_Type_Erase FLASH Erase Type
* @{
*/
#define FLASH_TYPEERASE_PAGES 0x00U /*!<Pages erase only*/
#define FLASH_TYPEERASE_MASSERASE 0x01U /*!<Flash mass erase activation*/
/**
* @}
*/
/** @defgroup FLASH_Banks FLASH Banks
* @{
*/
#define FLASH_BANK_1 0x00000001U /*!< Bank 1 */
#if defined (FLASH_OPTR_DBANK)
#define FLASH_BANK_2 0x00000002U /*!< Bank 2 */
#define FLASH_BANK_BOTH (FLASH_BANK_1 | FLASH_BANK_2) /*!< Bank1 and Bank2 */
#else
#define FLASH_BANK_BOTH FLASH_BANK_1 /*!< Bank 1 */
#endif
/**
* @}
*/
/** @defgroup FLASH_Type_Program FLASH Program Type
* @{
*/
#define FLASH_TYPEPROGRAM_DOUBLEWORD 0x00U /*!< Program a double-word (64-bit) at a specified address.*/
#define FLASH_TYPEPROGRAM_FAST 0x01U /*!< Fast program a 32 row double-word (64-bit) at a specified address.
And another 32 row double-word (64-bit) will be programmed */
#define FLASH_TYPEPROGRAM_FAST_AND_LAST 0x02U /*!< Fast program a 32 row double-word (64-bit) at a specified address.
And this is the last 32 row double-word (64-bit) programmed */
/**
* @}
*/
/** @defgroup FLASH_OB_Type FLASH Option Bytes Type
* @{
*/
#define OPTIONBYTE_WRP 0x01U /*!< WRP option byte configuration */
#define OPTIONBYTE_RDP 0x02U /*!< RDP option byte configuration */
#define OPTIONBYTE_USER 0x04U /*!< USER option byte configuration */
#define OPTIONBYTE_PCROP 0x08U /*!< PCROP option byte configuration */
#define OPTIONBYTE_BOOT_LOCK 0x10U /*!< Boot lock option byte configuration */
#define OPTIONBYTE_SEC 0x20U /*!< Securable memory option byte configuration */
/**
* @}
*/
/** @defgroup FLASH_OB_WRP_Area FLASH WRP Area
* @{
*/
#define OB_WRPAREA_BANK1_AREAA 0x00U /*!< Flash Bank 1 Area A */
#define OB_WRPAREA_BANK1_AREAB 0x01U /*!< Flash Bank 1 Area B */
#if defined (FLASH_OPTR_DBANK)
#define OB_WRPAREA_BANK2_AREAA 0x02U /*!< Flash Bank 2 Area A */
#define OB_WRPAREA_BANK2_AREAB 0x04U /*!< Flash Bank 2 Area B */
#endif
/**
* @}
*/
/** @defgroup FLASH_OB_Boot_Lock FLASH Boot Lock
* @{
*/
#define OB_BOOT_LOCK_DISABLE 0x00000000U /*!< Boot Lock Disable */
#define OB_BOOT_LOCK_ENABLE FLASH_SEC1R_BOOT_LOCK /*!< Boot Lock Enable */
/**
* @}
*/
/** @defgroup FLASH_OB_Read_Protection FLASH Option Bytes Read Protection
* @{
*/
#define OB_RDP_LEVEL_0 0xAAU
#define OB_RDP_LEVEL_1 0xBBU
#define OB_RDP_LEVEL_2 0xCCU /*!< Warning: When enabling read protection level 2
it's no more possible to go back to level 1 or 0 */
/**
* @}
*/
/** @defgroup FLASH_OB_USER_Type FLASH Option Bytes User Type
* @{
*/
#define OB_USER_BOR_LEV 0x00000001U /*!< BOR reset Level */
#define OB_USER_nRST_STOP 0x00000002U /*!< Reset generated when entering the stop mode */
#define OB_USER_nRST_STDBY 0x00000004U /*!< Reset generated when entering the standby mode */
#define OB_USER_IWDG_SW 0x00000008U /*!< Independent watchdog selection */
#define OB_USER_IWDG_STOP 0x00000010U /*!< Independent watchdog counter freeze in stop mode */
#define OB_USER_IWDG_STDBY 0x00000020U /*!< Independent watchdog counter freeze in standby mode */
#define OB_USER_WWDG_SW 0x00000040U /*!< Window watchdog selection */
#if defined (FLASH_OPTR_DBANK)
#define OB_USER_BFB2 0x00000080U /*!< Dual-bank boot */
#define OB_USER_DBANK 0x00000100U /*!< Single bank with 128-bits data or two banks with 64-bits data */
#endif
#if defined (FLASH_OPTR_PB4_PUPEN)
#define OB_USER_PB4_PUPEN 0x00000100U /*!< USB power delivery dead-battery/TDI pull-up */
#endif
#define OB_USER_nBOOT1 0x00000200U /*!< Boot configuration */
#define OB_USER_SRAM_PE 0x00000400U /*!< SRAM parity check enable (first 32kB of SRAM1 + CCM SRAM) */
#define OB_USER_CCMSRAM_RST 0x00000800U /*!< CCMSRAM Erase when system reset */
#define OB_USER_nRST_SHDW 0x00001000U /*!< Reset generated when entering the shutdown mode */
#define OB_USER_nSWBOOT0 0x00002000U /*!< Software BOOT0 */
#define OB_USER_nBOOT0 0x00004000U /*!< nBOOT0 option bit */
#define OB_USER_NRST_MODE 0x00008000U /*!< Reset pin configuration */
#define OB_USER_IRHEN 0x00010000U /*!< Internal Reset Holder enable */
/**
* @}
*/
/** @defgroup FLASH_OB_USER_BOR_LEVEL FLASH Option Bytes User BOR Level
* @{
*/
#define OB_BOR_LEVEL_0 FLASH_OPTR_BOR_LEV_0 /*!< Reset level threshold is around 1.7V */
#define OB_BOR_LEVEL_1 FLASH_OPTR_BOR_LEV_1 /*!< Reset level threshold is around 2.0V */
#define OB_BOR_LEVEL_2 FLASH_OPTR_BOR_LEV_2 /*!< Reset level threshold is around 2.2V */
#define OB_BOR_LEVEL_3 FLASH_OPTR_BOR_LEV_3 /*!< Reset level threshold is around 2.5V */
#define OB_BOR_LEVEL_4 FLASH_OPTR_BOR_LEV_4 /*!< Reset level threshold is around 2.8V */
/**
* @}
*/
/** @defgroup FLASH_OB_USER_nRST_STOP FLASH Option Bytes User Reset On Stop
* @{
*/
#define OB_STOP_RST 0x00000000U /*!< Reset generated when entering the stop mode */
#define OB_STOP_NORST FLASH_OPTR_nRST_STOP /*!< No reset generated when entering the stop mode */
/**
* @}
*/
/** @defgroup FLASH_OB_USER_nRST_STANDBY FLASH Option Bytes User Reset On Standby
* @{
*/
#define OB_STANDBY_RST 0x00000000U /*!< Reset generated when entering the standby mode */
#define OB_STANDBY_NORST FLASH_OPTR_nRST_STDBY /*!< No reset generated when entering the standby mode */
/**
* @}
*/
/** @defgroup FLASH_OB_USER_nRST_SHUTDOWN FLASH Option Bytes User Reset On Shutdown
* @{
*/
#define OB_SHUTDOWN_RST 0x00000000U /*!< Reset generated when entering the shutdown mode */
#define OB_SHUTDOWN_NORST FLASH_OPTR_nRST_SHDW /*!< No reset generated when entering the shutdown mode */
/**
* @}
*/
/** @defgroup FLASH_OB_USER_IWDG_SW FLASH Option Bytes User IWDG Type
* @{
*/
#define OB_IWDG_HW 0x00000000U /*!< Hardware independent watchdog */
#define OB_IWDG_SW FLASH_OPTR_IWDG_SW /*!< Software independent watchdog */
/**
* @}
*/
/** @defgroup FLASH_OB_USER_IWDG_STOP FLASH Option Bytes User IWDG Mode On Stop
* @{
*/
#define OB_IWDG_STOP_FREEZE 0x00000000U /*!< Independent watchdog counter is frozen in Stop mode */
#define OB_IWDG_STOP_RUN FLASH_OPTR_IWDG_STOP /*!< Independent watchdog counter is running in Stop mode */
/**
* @}
*/
/** @defgroup FLASH_OB_USER_IWDG_STANDBY FLASH Option Bytes User IWDG Mode On Standby
* @{
*/
#define OB_IWDG_STDBY_FREEZE 0x00000000U /*!< Independent watchdog counter is frozen in Standby mode */
#define OB_IWDG_STDBY_RUN FLASH_OPTR_IWDG_STDBY /*!< Independent watchdog counter is running in Standby mode */
/**
* @}
*/
/** @defgroup FLASH_OB_USER_WWDG_SW FLASH Option Bytes User WWDG Type
* @{
*/
#define OB_WWDG_HW 0x00000000U /*!< Hardware window watchdog */
#define OB_WWDG_SW FLASH_OPTR_WWDG_SW /*!< Software window watchdog */
/**
* @}
*/
#if defined (FLASH_OPTR_DBANK)
/** @defgroup FLASH_OB_USER_BFB2 FLASH Option Bytes User BFB2 Mode
* @{
*/
#define OB_BFB2_DISABLE 0x00000000U /*!< Dual-bank boot disable */
#define OB_BFB2_ENABLE FLASH_OPTR_BFB2 /*!< Dual-bank boot enable */
/**
* @}
*/
/** @defgroup FLASH_OB_USER_DBANK FLASH Option Bytes User DBANK Type
* @{
*/
#define OB_DBANK_128_BITS 0x00000000U /*!< Single-bank with 128-bits data */
#define OB_DBANK_64_BITS FLASH_OPTR_DBANK /*!< Dual-bank with 64-bits data */
/**
* @}
*/
#endif
#if defined (FLASH_OPTR_PB4_PUPEN)
/** @defgroup FLASH_OB_USER_PB4_PUPEN FLASH Option Bytes User PB4 PUPEN bit
* @{
*/
#define OB_PB4_PUPEN_DISABLE 0x00000000U /*!< USB power delivery dead-battery enabled/ TDI pull-up deactivated */
#define OB_PB4_PUPEN_ENABLE FLASH_OPTR_PB4_PUPEN /*!< USB power delivery dead-battery disabled/ TDI pull-up activated */
/**
* @}
*/
#endif
/** @defgroup FLASH_OB_USER_nBOOT1 FLASH Option Bytes User BOOT1 Type
* @{
*/
#define OB_BOOT1_SRAM 0x00000000U /*!< Embedded SRAM1 is selected as boot space (if BOOT0=1) */
#define OB_BOOT1_SYSTEM FLASH_OPTR_nBOOT1 /*!< System memory is selected as boot space (if BOOT0=1) */
/**
* @}
*/
/** @defgroup FLASH_OB_USER_SRAM_PE FLASH Option Bytes User SRAM Parity Check Type
* @{
*/
#define OB_SRAM_PARITY_ENABLE 0x00000000U /*!< SRAM parity check enable (first 32kB of SRAM1 + CCM SRAM) */
#define OB_SRAM_PARITY_DISABLE FLASH_OPTR_SRAM_PE /*!< SRAM parity check disable (first 32kB of SRAM1 + CCM SRAM) */
/**
* @}
*/
/** @defgroup FLASH_OB_USER_CCMSRAM_RST FLASH Option Bytes User CCMSRAM Erase On Reset Type
* @{
*/
#define OB_CCMSRAM_RST_ERASE 0x00000000U /*!< CCMSRAM erased when a system reset occurs */
#define OB_CCMSRAM_RST_NOT_ERASE FLASH_OPTR_CCMSRAM_RST /*!< CCMSRAM is not erased when a system reset occurs */
/**
* @}
*/
/** @defgroup FLASH_OB_USER_nSWBOOT0 FLASH Option Bytes User Software BOOT0
* @{
*/
#define OB_BOOT0_FROM_OB 0x00000000U /*!< BOOT0 taken from the option bit nBOOT0 */
#define OB_BOOT0_FROM_PIN FLASH_OPTR_nSWBOOT0 /*!< BOOT0 taken from PB8/BOOT0 pin */
/**
* @}
*/
/** @defgroup FLASH_OB_USER_nBOOT0 FLASH Option Bytes User nBOOT0 option bit
* @{
*/
#define OB_nBOOT0_RESET 0x00000000U /*!< nBOOT0 = 0 */
#define OB_nBOOT0_SET FLASH_OPTR_nBOOT0 /*!< nBOOT0 = 1 */
/**
* @}
*/
/** @defgroup FLASH_OB_USER_NRST_MODE FLASH Option Bytes User NRST mode bit
* @{
*/
#define OB_NRST_MODE_INPUT_ONLY FLASH_OPTR_NRST_MODE_0 /*!< Reset pin is in Reset input mode only */
#define OB_NRST_MODE_GPIO FLASH_OPTR_NRST_MODE_1 /*!< Reset pin is in GPIO mode only */
#define OB_NRST_MODE_INPUT_OUTPUT FLASH_OPTR_NRST_MODE /*!< Reset pin is in reset input and output mode */
/**
* @}
*/
/** @defgroup FLASH_OB_USER_INTERNAL_RESET_HOLDER FLASH Option Bytes User internal reset holder bit
* @{
*/
#define OB_IRH_DISABLE 0x00000000U /*!< Internal Reset holder disable */
#define OB_IRH_ENABLE FLASH_OPTR_IRHEN /*!< Internal Reset holder enable */
/**
* @}
*/
/** @defgroup FLASH_OB_PCROP_RDP FLASH Option Bytes PCROP On RDP Level Type
* @{
*/
#define OB_PCROP_RDP_NOT_ERASE 0x00000000U /*!< PCROP area is not erased when the RDP level
is decreased from Level 1 to Level 0 */
#define OB_PCROP_RDP_ERASE FLASH_PCROP1ER_PCROP_RDP /*!< PCROP area is erased when the RDP level is
decreased from Level 1 to Level 0 (full mass erase) */
/**
* @}
*/
/** @defgroup FLASH_Latency FLASH Latency
* @{
*/
#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero wait state */
#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One wait state */
#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two wait states */
#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three wait states */
#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four wait states */
#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five wait state */
#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six wait state */
#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven wait states */
#define FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH Eight wait states */
#define FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH Nine wait states */
#define FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH Ten wait state */
#define FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH Eleven wait state */
#define FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH Twelve wait states */
#define FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH Thirteen wait states */
#define FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH Fourteen wait states */
#define FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH Fifteen wait states */
/**
* @}
*/
/** @defgroup FLASH_Keys FLASH Keys
* @{
*/
#define FLASH_KEY1 0x45670123U /*!< Flash key1 */
#define FLASH_KEY2 0xCDEF89ABU /*!< Flash key2: used with FLASH_KEY1
to unlock the FLASH registers access */
#define FLASH_PDKEY1 0x04152637U /*!< Flash power down key1 */
#define FLASH_PDKEY2 0xFAFBFCFDU /*!< Flash power down key2: used with FLASH_PDKEY1
to unlock the RUN_PD bit in FLASH_ACR */
#define FLASH_OPTKEY1 0x08192A3BU /*!< Flash option byte key1 */
#define FLASH_OPTKEY2 0x4C5D6E7FU /*!< Flash option byte key2: used with FLASH_OPTKEY1
to allow option bytes operations */
/**
* @}
*/
/** @defgroup FLASH_Flags FLASH Flags Definition
* @{
*/
#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of operation flag */
#define FLASH_FLAG_OPERR FLASH_SR_OPERR /*!< FLASH Operation error flag */
#define FLASH_FLAG_PROGERR FLASH_SR_PROGERR /*!< FLASH Programming error flag */
#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protection error flag */
#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming alignment error flag */
#define FLASH_FLAG_SIZERR FLASH_SR_SIZERR /*!< FLASH Size error flag */
#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming sequence error flag */
#define FLASH_FLAG_MISERR FLASH_SR_MISERR /*!< FLASH Fast programming data miss error flag */
#define FLASH_FLAG_FASTERR FLASH_SR_FASTERR /*!< FLASH Fast programming error flag */
#define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< FLASH PCROP read error flag */
#define FLASH_FLAG_OPTVERR FLASH_SR_OPTVERR /*!< FLASH Option validity error flag */
#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
#define FLASH_FLAG_ECCC FLASH_ECCR_ECCC /*!< FLASH ECC correction in 64 LSB bits */
#define FLASH_FLAG_ECCD FLASH_ECCR_ECCD /*!< FLASH ECC detection in 64 LSB bits */
#if defined (FLASH_OPTR_DBANK)
#define FLASH_FLAG_ECCC2 FLASH_ECCR_ECCC2 /*!< FLASH ECC correction in 64 MSB bits (mode 128 bits only) */
#define FLASH_FLAG_ECCD2 FLASH_ECCR_ECCD2 /*!< FLASH ECC detection in 64 MSB bits (mode 128 bits only) */
#endif
#define FLASH_FLAG_SR_ERRORS (FLASH_FLAG_OPERR | FLASH_FLAG_PROGERR | FLASH_FLAG_WRPERR | \
FLASH_FLAG_PGAERR | FLASH_FLAG_SIZERR | FLASH_FLAG_PGSERR | \
FLASH_FLAG_MISERR | FLASH_FLAG_FASTERR | FLASH_FLAG_RDERR | \
FLASH_FLAG_OPTVERR)
#if defined (FLASH_OPTR_DBANK)
#define FLASH_FLAG_ECCR_ERRORS (FLASH_FLAG_ECCC | FLASH_FLAG_ECCD | FLASH_FLAG_ECCC2 | FLASH_FLAG_ECCD2)
#else
#define FLASH_FLAG_ECCR_ERRORS (FLASH_FLAG_ECCC | FLASH_FLAG_ECCD)
#endif
#define FLASH_FLAG_ALL_ERRORS (FLASH_FLAG_SR_ERRORS | FLASH_FLAG_ECCR_ERRORS)
/**
* @}
*/
/** @defgroup FLASH_Interrupt_definition FLASH Interrupts Definition
* @brief FLASH Interrupt definition
* @{
*/
#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
#define FLASH_IT_OPERR FLASH_CR_ERRIE /*!< Error Interrupt source */
#define FLASH_IT_RDERR FLASH_CR_RDERRIE /*!< PCROP Read Error Interrupt source*/
#define FLASH_IT_ECCC (FLASH_ECCR_ECCIE >> 24U) /*!< ECC Correction Interrupt source */
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
* @brief macros to control FLASH features
* @{
*/
/**
* @brief Set the FLASH Latency.
* @param __LATENCY__ FLASH Latency.
* This parameter can be one of the following values :
* @arg FLASH_LATENCY_0: FLASH Zero wait state
* @arg FLASH_LATENCY_1: FLASH One wait state
* @arg FLASH_LATENCY_2: FLASH Two wait states
* @arg FLASH_LATENCY_3: FLASH Three wait states
* @arg FLASH_LATENCY_4: FLASH Four wait states
* @arg FLASH_LATENCY_5: FLASH Five wait states
* @arg FLASH_LATENCY_6: FLASH Six wait states
* @arg FLASH_LATENCY_7: FLASH Seven wait states
* @arg FLASH_LATENCY_8: FLASH Eight wait states
* @arg FLASH_LATENCY_9: FLASH Nine wait states
* @arg FLASH_LATENCY_10: FLASH Ten wait state
* @arg FLASH_LATENCY_11: FLASH Eleven wait state
* @arg FLASH_LATENCY_12: FLASH Twelve wait states
* @arg FLASH_LATENCY_13: FLASH Thirteen wait states
* @arg FLASH_LATENCY_14: FLASH Fourteen wait states
* @arg FLASH_LATENCY_15: FLASH Fifteen wait states
* @retval None
*/
#define __HAL_FLASH_SET_LATENCY(__LATENCY__) MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (__LATENCY__))
/**
* @brief Get the FLASH Latency.
* @retval FLASH_Latency.
* This parameter can be one of the following values :
* @arg FLASH_LATENCY_0: FLASH Zero wait state
* @arg FLASH_LATENCY_1: FLASH One wait state
* @arg FLASH_LATENCY_2: FLASH Two wait states
* @arg FLASH_LATENCY_3: FLASH Three wait states
* @arg FLASH_LATENCY_4: FLASH Four wait states
* @arg FLASH_LATENCY_5: FLASH Five wait states
* @arg FLASH_LATENCY_6: FLASH Six wait states
* @arg FLASH_LATENCY_7: FLASH Seven wait states
* @arg FLASH_LATENCY_8: FLASH Eight wait states
* @arg FLASH_LATENCY_9: FLASH Nine wait states
* @arg FLASH_LATENCY_10: FLASH Ten wait state
* @arg FLASH_LATENCY_11: FLASH Eleven wait state
* @arg FLASH_LATENCY_12: FLASH Twelve wait states
* @arg FLASH_LATENCY_13: FLASH Thirteen wait states
* @arg FLASH_LATENCY_14: FLASH Fourteen wait states
* @arg FLASH_LATENCY_15: FLASH Fifteen wait states
*/
#define __HAL_FLASH_GET_LATENCY() READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY)
/**
* @brief Enable the FLASH prefetch buffer.
* @retval None
*/
#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN)
/**
* @brief Disable the FLASH prefetch buffer.
* @retval None
*/
#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN)
/**
* @brief Enable the FLASH instruction cache.
* @retval none
*/
#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_ICEN)
/**
* @brief Disable the FLASH instruction cache.
* @retval none
*/
#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICEN)
/**
* @brief Enable the FLASH data cache.
* @retval none
*/
#define __HAL_FLASH_DATA_CACHE_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_DCEN)
/**
* @brief Disable the FLASH data cache.
* @retval none
*/
#define __HAL_FLASH_DATA_CACHE_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCEN)
/**
* @brief Reset the FLASH instruction Cache.
* @note This function must be used only when the Instruction Cache is disabled.
* @retval None
*/
#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do { SET_BIT(FLASH->ACR, FLASH_ACR_ICRST); \
CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICRST); \
} while (0)
/**
* @brief Reset the FLASH data Cache.
* @note This function must be used only when the data Cache is disabled.
* @retval None
*/
#define __HAL_FLASH_DATA_CACHE_RESET() do { SET_BIT(FLASH->ACR, FLASH_ACR_DCRST); \
CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCRST); \
} while (0)
/**
* @brief Enable the FLASH power down during Low-power run mode.
* @note Writing this bit to 1, automatically the keys are
* lost and a new unlock sequence is necessary to re-write it to 0.
*/
#define __HAL_FLASH_POWER_DOWN_ENABLE() do { WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY1); \
WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY2); \
SET_BIT(FLASH->ACR, FLASH_ACR_RUN_PD); \
} while (0)
/**
* @brief Disable the FLASH power down during Low-power run mode.
* @note Writing this bit to 0, automatically the keys are
* lost and a new unlock sequence is necessary to re-write it to 1.
*/
#define __HAL_FLASH_POWER_DOWN_DISABLE() do { WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY1); \
WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY2); \
CLEAR_BIT(FLASH->ACR, FLASH_ACR_RUN_PD); \
} while (0)
/**
* @brief Enable the FLASH power down during Low-Power sleep mode
* @retval none
*/
#define __HAL_FLASH_SLEEP_POWERDOWN_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD)
/**
* @brief Disable the FLASH power down during Low-Power sleep mode
* @retval none
*/
#define __HAL_FLASH_SLEEP_POWERDOWN_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD)
/**
* @}
*/
/** @defgroup FLASH_Interrupt FLASH Interrupts Macros
* @brief macros to handle FLASH interrupts
* @{
*/
/**
* @brief Enable the specified FLASH interrupt.
* @param __INTERRUPT__ FLASH interrupt
* This parameter can be any combination of the following values:
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
* @arg FLASH_IT_OPERR: Error Interrupt
* @arg FLASH_IT_RDERR: PCROP Read Error Interrupt
* @arg FLASH_IT_ECCC: ECC Correction Interrupt
* @retval none
*/
#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & FLASH_IT_ECCC) != 0U) { SET_BIT(FLASH->ECCR, FLASH_ECCR_ECCIE); }\
if(((__INTERRUPT__) & (~FLASH_IT_ECCC)) != 0U) { SET_BIT(FLASH->CR, ((__INTERRUPT__) & (~FLASH_IT_ECCC))); }\
} while (0)
/**
* @brief Disable the specified FLASH interrupt.
* @param __INTERRUPT__ FLASH interrupt
* This parameter can be any combination of the following values:
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
* @arg FLASH_IT_OPERR: Error Interrupt
* @arg FLASH_IT_RDERR: PCROP Read Error Interrupt
* @arg FLASH_IT_ECCC: ECC Correction Interrupt
* @retval none
*/
#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & FLASH_IT_ECCC) != 0U) { CLEAR_BIT(FLASH->ECCR, FLASH_ECCR_ECCIE); }\
if(((__INTERRUPT__) & (~FLASH_IT_ECCC)) != 0U) { CLEAR_BIT(FLASH->CR, ((__INTERRUPT__) & (~FLASH_IT_ECCC))); }\
} while (0)
/**
* @brief Check whether the specified FLASH flag is set or not.
* @param __FLAG__ specifies the FLASH flag to check.
* This parameter can be one of the following values:
* @arg FLASH_FLAG_EOP: FLASH End of Operation flag
* @arg FLASH_FLAG_OPERR: FLASH Operation error flag
* @arg FLASH_FLAG_PROGERR: FLASH Programming error flag
* @arg FLASH_FLAG_WRPERR: FLASH Write protection error flag
* @arg FLASH_FLAG_PGAERR: FLASH Programming alignment error flag
* @arg FLASH_FLAG_SIZERR: FLASH Size error flag
* @arg FLASH_FLAG_PGSERR: FLASH Programming sequence error flag
* @arg FLASH_FLAG_MISERR: FLASH Fast programming data miss error flag
* @arg FLASH_FLAG_FASTERR: FLASH Fast programming error flag
* @arg FLASH_FLAG_RDERR: FLASH PCROP read error flag
* @arg FLASH_FLAG_OPTVERR: FLASH Option validity error flag
* @arg FLASH_FLAG_BSY: FLASH write/erase operations in progress flag
* @arg FLASH_FLAG_ECCC: FLASH one ECC error has been detected and corrected in 64 LSB bits
* @arg FLASH_FLAG_ECCD: FLASH two ECC errors have been detected in 64 LSB bits
* @arg FLASH_FLAG_ECCC2(*): FLASH one ECC error has been detected and corrected in 64 MSB bits (mode 128 bits only)
* @arg FLASH_FLAG_ECCD2(*): FLASH two ECC errors have been detected in 64 MSB bits (mode 128 bits only)
* @note (*) availability depends on devices
* @retval The new state of FLASH_FLAG (SET or RESET).
*/
#define __HAL_FLASH_GET_FLAG(__FLAG__) ((((__FLAG__) & FLASH_FLAG_ECCR_ERRORS) != 0U) ? \
(READ_BIT(FLASH->ECCR, (__FLAG__)) == (__FLAG__)) : \
(READ_BIT(FLASH->SR, (__FLAG__)) == (__FLAG__)))
/**
* @brief Clear the FLASH's pending flags.
* @param __FLAG__ specifies the FLASH flags to clear.
* This parameter can be any combination of the following values:
* @arg FLASH_FLAG_EOP: FLASH End of Operation flag
* @arg FLASH_FLAG_OPERR: FLASH Operation error flag
* @arg FLASH_FLAG_PROGERR: FLASH Programming error flag
* @arg FLASH_FLAG_WRPERR: FLASH Write protection error flag
* @arg FLASH_FLAG_PGAERR: FLASH Programming alignment error flag
* @arg FLASH_FLAG_SIZERR: FLASH Size error flag
* @arg FLASH_FLAG_PGSERR: FLASH Programming sequence error flag
* @arg FLASH_FLAG_MISERR: FLASH Fast programming data miss error flag
* @arg FLASH_FLAG_FASTERR: FLASH Fast programming error flag
* @arg FLASH_FLAG_RDERR: FLASH PCROP read error flag
* @arg FLASH_FLAG_OPTVERR: FLASH Option validity error flag
* @arg FLASH_FLAG_ECCC: FLASH one ECC error has been detected and corrected in 64 LSB bits
* @arg FLASH_FLAG_ECCD: FLASH two ECC errors have been detected in 64 LSB bits
* @arg FLASH_FLAG_ECCC2(*): FLASH one ECC error has been detected and corrected in 64 MSB bits (mode 128 bits only)
* @arg FLASH_FLAG_ECCD2(*): FLASH two ECC errors have been detected in 64 MSB bits (mode 128 bits only)
* @arg FLASH_FLAG_SR_ERRORS: FLASH All SR errors flags
* @arg FLASH_FLAG_ECCR_ERRORS: FLASH All ECCR errors flags
* @note (*) availability depends on devices
* @retval None
*/
#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { if(((__FLAG__) & FLASH_FLAG_ECCR_ERRORS) != 0U) { SET_BIT(FLASH->ECCR, ((__FLAG__) & FLASH_FLAG_ECCR_ERRORS)); }\
if(((__FLAG__) & ~(FLASH_FLAG_ECCR_ERRORS)) != 0U) { WRITE_REG(FLASH->SR, ((__FLAG__) & ~(FLASH_FLAG_ECCR_ERRORS))); }\
} while (0)
/**
* @}
*/
/* Include FLASH HAL Extended module */
#include "stm32g4xx_hal_flash_ex.h"
#include "stm32g4xx_hal_flash_ramfunc.h"
/* Exported variables --------------------------------------------------------*/
/** @defgroup FLASH_Exported_Variables FLASH Exported Variables
* @{
*/
extern FLASH_ProcessTypeDef pFlash;
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup FLASH_Exported_Functions
* @{
*/
/* Program operation functions ***********************************************/
/** @addtogroup FLASH_Exported_Functions_Group1
* @{
*/
HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
/* FLASH IRQ handler method */
void HAL_FLASH_IRQHandler(void);
/* Callbacks in non blocking modes */
void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
/**
* @}
*/
/* Peripheral Control functions **********************************************/
/** @addtogroup FLASH_Exported_Functions_Group2
* @{
*/
HAL_StatusTypeDef HAL_FLASH_Unlock(void);
HAL_StatusTypeDef HAL_FLASH_Lock(void);
/* Option bytes control */
HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
/**
* @}
*/
/* Peripheral State functions ************************************************/
/** @addtogroup FLASH_Exported_Functions_Group3
* @{
*/
uint32_t HAL_FLASH_GetError(void);
/**
* @}
*/
/**
* @}
*/
/** @addtogroup FLASH_Private_Functions
* @{
*/
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
/**
* @}
*/
/* Private constants --------------------------------------------------------*/
/** @defgroup FLASH_Private_Constants FLASH Private Constants
* @{
*/
#define FLASH_SIZE_DATA_REGISTER FLASHSIZE_BASE
#if defined (FLASH_OPTR_DBANK)
#define FLASH_SIZE ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0xFFFFU)) ? (0x200UL << 10U) : \
(((*((uint32_t *)FLASH_SIZE_DATA_REGISTER)) & 0xFFFFUL) << 10U))
#define FLASH_BANK_SIZE (FLASH_SIZE >> 1)
#define FLASH_PAGE_NB ((FLASH_SIZE == 0x00080000U) ? 128U : \
((FLASH_SIZE == 0x00040000U) ? 64U : 32U))
#define FLASH_PAGE_SIZE_128_BITS 0x1000U /* 4 KB */
#else
#define FLASH_SIZE ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0xFFFFU)) ? (0x80UL << 10U) : \
(((*((uint32_t *)FLASH_SIZE_DATA_REGISTER)) & 0xFFFFUL) << 10U))
#define FLASH_BANK_SIZE (FLASH_SIZE)
#define FLASH_PAGE_NB ((FLASH_SIZE == 0x00080000U) ? 256U : \
((FLASH_SIZE == 0x00040000U) ? 128U : 64U))
#endif
#define FLASH_PAGE_SIZE 0x800U /* 2 KB */
#define FLASH_TIMEOUT_VALUE 1000U /* 1 s */
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup FLASH_Private_Macros FLASH Private Macros
* @{
*/
#define IS_FLASH_TYPEERASE(VALUE) (((VALUE) == FLASH_TYPEERASE_PAGES) || \
((VALUE) == FLASH_TYPEERASE_MASSERASE))
#if defined (FLASH_OPTR_DBANK)
#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \
((BANK) == FLASH_BANK_2) || \
((BANK) == FLASH_BANK_BOTH))
#define IS_FLASH_BANK_EXCLUSIVE(BANK) (((BANK) == FLASH_BANK_1) || \
((BANK) == FLASH_BANK_2))
#else
#define IS_FLASH_BANK(BANK) ((BANK) == FLASH_BANK_1)
#define IS_FLASH_BANK_EXCLUSIVE(BANK) ((BANK) == FLASH_BANK_1)
#endif
#define IS_FLASH_TYPEPROGRAM(VALUE) (((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD) || \
((VALUE) == FLASH_TYPEPROGRAM_FAST) || \
((VALUE) == FLASH_TYPEPROGRAM_FAST_AND_LAST))
#define IS_FLASH_MAIN_MEM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) < (FLASH_BASE+FLASH_SIZE)))
#define IS_FLASH_OTP_ADDRESS(ADDRESS) (((ADDRESS) >= 0x1FFF7000U) && ((ADDRESS) <= 0x1FFF73FFU))
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (IS_FLASH_MAIN_MEM_ADDRESS(ADDRESS) || IS_FLASH_OTP_ADDRESS(ADDRESS))
#define IS_FLASH_PAGE(PAGE) ((PAGE) < FLASH_PAGE_NB)
#define IS_OPTIONBYTE(VALUE) (((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_PCROP | \
OPTIONBYTE_BOOT_LOCK | OPTIONBYTE_SEC)))
#if defined (FLASH_OPTR_DBANK)
#define IS_OB_WRPAREA(VALUE) (((VALUE) == OB_WRPAREA_BANK1_AREAA) || ((VALUE) == OB_WRPAREA_BANK1_AREAB) || \
((VALUE) == OB_WRPAREA_BANK2_AREAA) || ((VALUE) == OB_WRPAREA_BANK2_AREAB))
#else
#define IS_OB_WRPAREA(VALUE) (((VALUE) == OB_WRPAREA_BANK1_AREAA) || ((VALUE) == OB_WRPAREA_BANK1_AREAB))
#endif
#define IS_OB_BOOT_LOCK(VALUE) (((VALUE) == OB_BOOT_LOCK_ENABLE) || ((VALUE) == OB_BOOT_LOCK_DISABLE))
#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
((LEVEL) == OB_RDP_LEVEL_1) ||\
((LEVEL) == OB_RDP_LEVEL_2))
#define IS_OB_USER_TYPE(TYPE) (((TYPE) <= 0x1FFFFU) && ((TYPE) != 0U))
#define IS_OB_USER_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL_0) || ((LEVEL) == OB_BOR_LEVEL_1) || \
((LEVEL) == OB_BOR_LEVEL_2) || ((LEVEL) == OB_BOR_LEVEL_3) || \
((LEVEL) == OB_BOR_LEVEL_4))
#define IS_OB_USER_STOP(VALUE) (((VALUE) == OB_STOP_RST) || ((VALUE) == OB_STOP_NORST))
#define IS_OB_USER_STANDBY(VALUE) (((VALUE) == OB_STANDBY_RST) || ((VALUE) == OB_STANDBY_NORST))
#define IS_OB_USER_SHUTDOWN(VALUE) (((VALUE) == OB_SHUTDOWN_RST) || ((VALUE) == OB_SHUTDOWN_NORST))
#define IS_OB_USER_IWDG(VALUE) (((VALUE) == OB_IWDG_HW) || ((VALUE) == OB_IWDG_SW))
#define IS_OB_USER_IWDG_STOP(VALUE) (((VALUE) == OB_IWDG_STOP_FREEZE) || ((VALUE) == OB_IWDG_STOP_RUN))
#define IS_OB_USER_IWDG_STDBY(VALUE) (((VALUE) == OB_IWDG_STDBY_FREEZE) || ((VALUE) == OB_IWDG_STDBY_RUN))
#define IS_OB_USER_WWDG(VALUE) (((VALUE) == OB_WWDG_HW) || ((VALUE) == OB_WWDG_SW))
#if defined (FLASH_OPTR_DBANK)
#define IS_OB_USER_BFB2(VALUE) (((VALUE) == OB_BFB2_DISABLE) || ((VALUE) == OB_BFB2_ENABLE))
#define IS_OB_USER_DBANK(VALUE) (((VALUE) == OB_DBANK_128_BITS) || ((VALUE) == OB_DBANK_64_BITS))
#endif
#if defined (FLASH_OPTR_PB4_PUPEN)
#define IS_OB_USER_PB4_PUPEN(VALUE) (((VALUE) == OB_PB4_PUPEN_DISABLE) || ((VALUE) == OB_PB4_PUPEN_ENABLE))
#endif
#define IS_OB_USER_BOOT1(VALUE) (((VALUE) == OB_BOOT1_SRAM) || ((VALUE) == OB_BOOT1_SYSTEM))
#define IS_OB_USER_SRAM_PARITY(VALUE) (((VALUE) == OB_SRAM_PARITY_ENABLE) || ((VALUE) == OB_SRAM_PARITY_DISABLE))
#define IS_OB_USER_CCMSRAM_RST(VALUE) (((VALUE) == OB_CCMSRAM_RST_ERASE) || ((VALUE) == OB_CCMSRAM_RST_NOT_ERASE))
#define IS_OB_USER_SWBOOT0(VALUE) (((VALUE) == OB_BOOT0_FROM_OB) || ((VALUE) == OB_BOOT0_FROM_PIN))
#define IS_OB_USER_BOOT0(VALUE) (((VALUE) == OB_nBOOT0_RESET) || ((VALUE) == OB_nBOOT0_SET))
#define IS_OB_USER_NRST_MODE(VALUE) (((VALUE) == OB_NRST_MODE_GPIO) || ((VALUE) == OB_NRST_MODE_INPUT_ONLY) || \
((VALUE) == OB_NRST_MODE_INPUT_OUTPUT))
#define IS_OB_USER_IRHEN(VALUE) (((VALUE) == OB_IRH_ENABLE) || ((VALUE) == OB_IRH_DISABLE))
#define IS_OB_PCROP_RDP(VALUE) (((VALUE) == OB_PCROP_RDP_NOT_ERASE) || ((VALUE) == OB_PCROP_RDP_ERASE))
#define IS_OB_SECMEM_SIZE(VALUE) ((VALUE) <= FLASH_PAGE_NB)
#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || ((LATENCY) == FLASH_LATENCY_1) || \
((LATENCY) == FLASH_LATENCY_2) || ((LATENCY) == FLASH_LATENCY_3) || \
((LATENCY) == FLASH_LATENCY_4) || ((LATENCY) == FLASH_LATENCY_5) || \
((LATENCY) == FLASH_LATENCY_6) || ((LATENCY) == FLASH_LATENCY_7) || \
((LATENCY) == FLASH_LATENCY_8) || ((LATENCY) == FLASH_LATENCY_9) || \
((LATENCY) == FLASH_LATENCY_10) || ((LATENCY) == FLASH_LATENCY_11) || \
((LATENCY) == FLASH_LATENCY_12) || ((LATENCY) == FLASH_LATENCY_13) || \
((LATENCY) == FLASH_LATENCY_14) || ((LATENCY) == FLASH_LATENCY_15))
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32G4xx_HAL_FLASH_H */