From debd87c17cf71f3f3c80f07f6cc0a2282d5e5a25 Mon Sep 17 00:00:00 2001 From: Chris Trimble Date: Wed, 10 Jul 2024 22:01:27 -0500 Subject: [PATCH] Enabled printf floats. Converted to cmake project --- .cproject => .cproject.bak | 0 .mxproject | 67 +- .project => .project.bak | 0 CMakeLists.txt | 68 + CMakePresets.json | 61 + Core/Src/main.c | 268 +- Core/Src/sht_40.c | 4 +- Core/Src/syscalls.c | 4 +- Core/Src/sysmem.c | 4 +- .../Device/ST/STM32G0xx/Include/stm32g0b1xx.h | 11273 ++++++++++++++++ .../Device/ST/STM32G0xx/Include/stm32g0xx.h | 244 + .../ST/STM32G0xx/Include/system_stm32g0xx.h | 103 + Drivers/CMSIS/Include/cmsis_armcc.h | 894 ++ Drivers/CMSIS/Include/cmsis_armclang.h | 1444 ++ Drivers/CMSIS/Include/cmsis_armclang_ltm.h | 1891 +++ Drivers/CMSIS/Include/cmsis_compiler.h | 283 + Drivers/CMSIS/Include/cmsis_gcc.h | 2168 +++ Drivers/CMSIS/Include/cmsis_iccarm.h | 964 ++ Drivers/CMSIS/Include/cmsis_version.h | 39 + Drivers/CMSIS/Include/core_armv81mml.h | 2968 ++++ Drivers/CMSIS/Include/core_armv8mbl.h | 1921 +++ Drivers/CMSIS/Include/core_armv8mml.h | 2835 ++++ Drivers/CMSIS/Include/core_cm0.h | 952 ++ Drivers/CMSIS/Include/core_cm0plus.h | 1085 ++ Drivers/CMSIS/Include/core_cm1.h | 979 ++ Drivers/CMSIS/Include/core_cm23.h | 1996 +++ Drivers/CMSIS/Include/core_cm3.h | 1937 +++ Drivers/CMSIS/Include/core_cm33.h | 2910 ++++ Drivers/CMSIS/Include/core_cm35p.h | 2910 ++++ Drivers/CMSIS/Include/core_cm4.h | 2124 +++ Drivers/CMSIS/Include/core_cm7.h | 2725 ++++ Drivers/CMSIS/Include/core_sc000.h | 1025 ++ Drivers/CMSIS/Include/core_sc300.h | 1912 +++ Drivers/CMSIS/Include/mpu_armv7.h | 272 + Drivers/CMSIS/Include/mpu_armv8.h | 346 + Drivers/CMSIS/Include/tz_context.h | 70 + .../Inc/Legacy/stm32_hal_legacy.h | 3919 ++++++ .../STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h | 838 ++ .../Inc/stm32g0xx_hal_adc.h | 1943 +++ .../Inc/stm32g0xx_hal_adc_ex.h | 186 + .../Inc/stm32g0xx_hal_cortex.h | 387 + .../Inc/stm32g0xx_hal_crc.h | 342 + .../Inc/stm32g0xx_hal_crc_ex.h | 150 + .../Inc/stm32g0xx_hal_def.h | 215 + .../Inc/stm32g0xx_hal_dma.h | 803 ++ .../Inc/stm32g0xx_hal_dma_ex.h | 278 + .../Inc/stm32g0xx_hal_exti.h | 387 + .../Inc/stm32g0xx_hal_flash.h | 1033 ++ .../Inc/stm32g0xx_hal_flash_ex.h | 116 + .../Inc/stm32g0xx_hal_gpio.h | 362 + .../Inc/stm32g0xx_hal_gpio_ex.h | 836 ++ .../Inc/stm32g0xx_hal_i2c.h | 838 ++ .../Inc/stm32g0xx_hal_i2c_ex.h | 177 + .../Inc/stm32g0xx_hal_pcd.h | 629 + .../Inc/stm32g0xx_hal_pcd_ex.h | 88 + .../Inc/stm32g0xx_hal_pwr.h | 325 + .../Inc/stm32g0xx_hal_pwr_ex.h | 641 + .../Inc/stm32g0xx_hal_rcc.h | 3169 +++++ .../Inc/stm32g0xx_hal_rcc_ex.h | 1590 +++ .../Inc/stm32g0xx_hal_rtc.h | 989 ++ .../Inc/stm32g0xx_hal_rtc_ex.h | 1162 ++ .../Inc/stm32g0xx_hal_spi.h | 851 ++ .../Inc/stm32g0xx_hal_spi_ex.h | 73 + .../Inc/stm32g0xx_hal_tim.h | 2469 ++++ .../Inc/stm32g0xx_hal_tim_ex.h | 494 + .../Inc/stm32g0xx_hal_uart.h | 1745 +++ .../Inc/stm32g0xx_hal_uart_ex.h | 771 ++ .../Inc/stm32g0xx_ll_adc.h | 5496 ++++++++ .../Inc/stm32g0xx_ll_bus.h | 1306 ++ .../Inc/stm32g0xx_ll_cortex.h | 585 + .../Inc/stm32g0xx_ll_crc.h | 461 + .../Inc/stm32g0xx_ll_crs.h | 780 ++ .../Inc/stm32g0xx_ll_dma.h | 2270 ++++ .../Inc/stm32g0xx_ll_dmamux.h | 1838 +++ .../Inc/stm32g0xx_ll_exti.h | 1557 +++ .../Inc/stm32g0xx_ll_gpio.h | 958 ++ .../Inc/stm32g0xx_ll_i2c.h | 2279 ++++ .../Inc/stm32g0xx_ll_lpuart.h | 2643 ++++ .../Inc/stm32g0xx_ll_pwr.h | 1528 +++ .../Inc/stm32g0xx_ll_rcc.h | 3977 ++++++ .../Inc/stm32g0xx_ll_rtc.h | 4215 ++++++ .../Inc/stm32g0xx_ll_spi.h | 2284 ++++ .../Inc/stm32g0xx_ll_system.h | 2085 +++ .../Inc/stm32g0xx_ll_usart.h | 4399 ++++++ .../Inc/stm32g0xx_ll_usb.h | 914 ++ .../Inc/stm32g0xx_ll_utils.h | 343 + .../STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c | 760 ++ .../Src/stm32g0xx_hal_adc.c | 2987 ++++ .../Src/stm32g0xx_hal_adc_ex.c | 409 + .../Src/stm32g0xx_hal_cortex.c | 443 + .../Src/stm32g0xx_hal_crc.c | 516 + .../Src/stm32g0xx_hal_crc_ex.c | 232 + .../Src/stm32g0xx_hal_dma.c | 1193 ++ .../Src/stm32g0xx_hal_dma_ex.c | 320 + .../Src/stm32g0xx_hal_exti.c | 670 + .../Src/stm32g0xx_hal_flash.c | 730 + .../Src/stm32g0xx_hal_flash_ex.c | 1309 ++ .../Src/stm32g0xx_hal_gpio.c | 550 + .../Src/stm32g0xx_hal_i2c.c | 7478 ++++++++++ .../Src/stm32g0xx_hal_i2c_ex.c | 364 + .../Src/stm32g0xx_hal_pcd.c | 2249 +++ .../Src/stm32g0xx_hal_pcd_ex.c | 333 + .../Src/stm32g0xx_hal_pwr.c | 542 + .../Src/stm32g0xx_hal_pwr_ex.c | 1016 ++ .../Src/stm32g0xx_hal_rcc.c | 1472 ++ .../Src/stm32g0xx_hal_rcc_ex.c | 1678 +++ .../Src/stm32g0xx_hal_rtc.c | 1922 +++ .../Src/stm32g0xx_hal_rtc_ex.c | 1982 +++ .../Src/stm32g0xx_hal_spi.c | 4429 ++++++ .../Src/stm32g0xx_hal_spi_ex.c | 112 + .../Src/stm32g0xx_hal_tim.c | 7931 +++++++++++ .../Src/stm32g0xx_hal_tim_ex.c | 2857 ++++ .../Src/stm32g0xx_hal_uart.c | 4762 +++++++ .../Src/stm32g0xx_hal_uart_ex.c | 1090 ++ .../Src/stm32g0xx_ll_adc.c | 778 ++ .../Src/stm32g0xx_ll_dma.c | 367 + .../Src/stm32g0xx_ll_rcc.c | 1380 ++ .../Src/stm32g0xx_ll_usb.c | 1451 ++ .../Class/CDC/Inc/usbd_cdc.h | 184 + .../Class/CDC/Src/usbd_cdc.c | 894 ++ .../Core/Inc/usbd_core.h | 172 + .../Core/Inc/usbd_ctlreq.h | 101 + .../Core/Inc/usbd_def.h | 514 + .../Core/Inc/usbd_ioreq.h | 113 + .../Core/Src/usbd_core.c | 1221 ++ .../Core/Src/usbd_ctlreq.c | 1051 ++ .../Core/Src/usbd_ioreq.c | 224 + Middlewares/Third_Party/FatFs/src/diskio.c | 141 + Middlewares/Third_Party/FatFs/src/diskio.h | 80 + Middlewares/Third_Party/FatFs/src/ff.c | 6140 +++++++++ Middlewares/Third_Party/FatFs/src/ff.h | 361 + .../Third_Party/FatFs/src/ff_gen_drv.c | 122 + .../Third_Party/FatFs/src/ff_gen_drv.h | 80 + Middlewares/Third_Party/FatFs/src/integer.h | 38 + .../Third_Party/FatFs/src/option/syscall.c | 177 + STM32G0B1KBUX_FLASH.ld | 114 +- USB_Device/App/usbd_cdc_if.c | 16 +- cmake/gcc-arm-none-eabi.cmake | 49 + cmake/stm32cubemx/CMakeLists.txt | 109 + startup_stm32g0b1xx.s | 296 + 140 files changed, 182741 insertions(+), 238 deletions(-) rename .cproject => .cproject.bak (100%) rename .project => .project.bak (100%) create mode 100644 CMakeLists.txt create mode 100644 CMakePresets.json create mode 100644 Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g0b1xx.h create mode 100644 Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g0xx.h create mode 100644 Drivers/CMSIS/Device/ST/STM32G0xx/Include/system_stm32g0xx.h create mode 100644 Drivers/CMSIS/Include/cmsis_armcc.h create mode 100644 Drivers/CMSIS/Include/cmsis_armclang.h create mode 100644 Drivers/CMSIS/Include/cmsis_armclang_ltm.h create mode 100644 Drivers/CMSIS/Include/cmsis_compiler.h create mode 100644 Drivers/CMSIS/Include/cmsis_gcc.h create mode 100644 Drivers/CMSIS/Include/cmsis_iccarm.h create mode 100644 Drivers/CMSIS/Include/cmsis_version.h create mode 100644 Drivers/CMSIS/Include/core_armv81mml.h create mode 100644 Drivers/CMSIS/Include/core_armv8mbl.h create mode 100644 Drivers/CMSIS/Include/core_armv8mml.h create mode 100644 Drivers/CMSIS/Include/core_cm0.h create mode 100644 Drivers/CMSIS/Include/core_cm0plus.h create mode 100644 Drivers/CMSIS/Include/core_cm1.h create mode 100644 Drivers/CMSIS/Include/core_cm23.h create mode 100644 Drivers/CMSIS/Include/core_cm3.h create mode 100644 Drivers/CMSIS/Include/core_cm33.h create mode 100644 Drivers/CMSIS/Include/core_cm35p.h create mode 100644 Drivers/CMSIS/Include/core_cm4.h create mode 100644 Drivers/CMSIS/Include/core_cm7.h create mode 100644 Drivers/CMSIS/Include/core_sc000.h create mode 100644 Drivers/CMSIS/Include/core_sc300.h create mode 100644 Drivers/CMSIS/Include/mpu_armv7.h create mode 100644 Drivers/CMSIS/Include/mpu_armv8.h create mode 100644 Drivers/CMSIS/Include/tz_context.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc_ex.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cortex.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_crc.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_crc_ex.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_def.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma_ex.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_exti.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ex.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio_ex.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c_ex.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd_ex.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr_ex.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc_ex.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rtc.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rtc_ex.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi_ex.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim_ex.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_adc.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_bus.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_cortex.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_crc.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_crs.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dma.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dmamux.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_exti.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_gpio.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_i2c.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_lpuart.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_pwr.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rcc.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rtc.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_spi.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_system.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_usart.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_usb.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_utils.h create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc_ex.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_crc.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_crc_ex.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma_ex.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_exti.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash_ex.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c_ex.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd_ex.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rtc.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rtc_ex.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi_ex.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim_ex.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart_ex.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_adc.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_dma.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_rcc.c create mode 100644 Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_usb.c create mode 100644 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h create mode 100644 Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c create mode 100644 Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h create mode 100644 Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h create mode 100644 Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h create mode 100644 Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h create mode 100644 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c create mode 100644 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c create mode 100644 Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c create mode 100644 Middlewares/Third_Party/FatFs/src/diskio.c create mode 100644 Middlewares/Third_Party/FatFs/src/diskio.h create mode 100644 Middlewares/Third_Party/FatFs/src/ff.c create mode 100644 Middlewares/Third_Party/FatFs/src/ff.h create mode 100644 Middlewares/Third_Party/FatFs/src/ff_gen_drv.c create mode 100644 Middlewares/Third_Party/FatFs/src/ff_gen_drv.h create mode 100644 Middlewares/Third_Party/FatFs/src/integer.h create mode 100644 Middlewares/Third_Party/FatFs/src/option/syscall.c create mode 100644 cmake/gcc-arm-none-eabi.cmake create mode 100644 cmake/stm32cubemx/CMakeLists.txt create mode 100644 startup_stm32g0b1xx.s diff --git a/.cproject b/.cproject.bak similarity index 100% rename from .cproject rename to .cproject.bak diff --git a/.mxproject b/.mxproject index d866692..1dd5353 100644 --- a/.mxproject +++ b/.mxproject @@ -1,5 +1,5 @@ [PreviousLibFiles] -LibFiles=Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_pcd.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_pcd_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_usb.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_rcc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_rcc_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_rcc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_bus.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_system.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_utils.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_crs.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_flash.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_flash_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_flash_ramfunc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_gpio.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_gpio_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_gpio.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_dma.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_dma_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_pwr.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_pwr_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_pwr.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_cortex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_cortex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_def.h;Drivers\STM32G0xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_exti.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_exti.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_adc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_adc_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_adc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_i2c.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_i2c.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_i2c_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_rtc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_rtc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_rtc_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_spi.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_spi.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_spi_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_tim.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_tim_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_uart.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_usart.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_lpuart.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_uart_ex.h;Middlewares\Third_Party\FatFs\src\diskio.h;Middlewares\Third_Party\FatFs\src\ff.h;Middlewares\Third_Party\FatFs\src\ff_gen_drv.h;Middlewares\Third_Party\FatFs\src\integer.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_core.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_ctlreq.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_def.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_ioreq.h;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Inc\usbd_cdc.h;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pcd.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pcd_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_usb.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_rcc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_gpio.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma_ex.c;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_dma.h;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_dma.c;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_dmamux.h;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_cortex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_exti.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_adc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_adc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_adc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_i2c.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_i2c_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rtc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rtc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_spi.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_spi_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_tim.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_tim_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart_ex.c;Middlewares\Third_Party\FatFs\src\diskio.c;Middlewares\Third_Party\FatFs\src\ff.c;Middlewares\Third_Party\FatFs\src\ff_gen_drv.c;Middlewares\Third_Party\FatFs\src\option\syscall.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_core.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ctlreq.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ioreq.c;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Src\usbd_cdc.c;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_pcd.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_pcd_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_usb.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_rcc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_rcc_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_rcc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_bus.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_system.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_utils.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_crs.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_flash.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_flash_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_flash_ramfunc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_gpio.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_gpio_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_gpio.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_dma.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_dma_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_pwr.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_pwr_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_pwr.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_cortex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_cortex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_def.h;Drivers\STM32G0xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_exti.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_exti.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_adc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_adc_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_adc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_i2c.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_i2c.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_i2c_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_rtc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_rtc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_rtc_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_spi.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_spi.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_spi_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_tim.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_tim_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_uart.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_usart.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_lpuart.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_uart_ex.h;Middlewares\Third_Party\FatFs\src\diskio.h;Middlewares\Third_Party\FatFs\src\ff.h;Middlewares\Third_Party\FatFs\src\ff_gen_drv.h;Middlewares\Third_Party\FatFs\src\integer.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_core.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_ctlreq.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_def.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_ioreq.h;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Inc\usbd_cdc.h;Drivers\CMSIS\Device\ST\STM32G0xx\Include\stm32g0b1xx.h;Drivers\CMSIS\Device\ST\STM32G0xx\Include\stm32g0xx.h;Drivers\CMSIS\Device\ST\STM32G0xx\Include\system_stm32g0xx.h;Drivers\CMSIS\Device\ST\STM32G0xx\Source\Templates\system_stm32g0xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_armclang_ltm.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv81mml.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm35p.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h; +LibFiles=Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_pcd.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_pcd_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_usb.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_rcc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_rcc_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_rcc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_bus.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_system.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_utils.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_crs.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_flash.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_flash_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_flash_ramfunc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_gpio.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_gpio_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_gpio.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_dma.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_dma_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_pwr.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_pwr_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_pwr.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_cortex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_cortex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_def.h;Drivers\STM32G0xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_exti.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_exti.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_adc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_adc_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_adc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_crc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_crc_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_crc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_i2c.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_i2c.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_i2c_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_rtc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_rtc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_rtc_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_spi.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_spi.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_spi_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_tim.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_tim_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_uart.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_usart.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_lpuart.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_uart_ex.h;Middlewares\Third_Party\FatFs\src\diskio.h;Middlewares\Third_Party\FatFs\src\ff.h;Middlewares\Third_Party\FatFs\src\ff_gen_drv.h;Middlewares\Third_Party\FatFs\src\integer.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_core.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_ctlreq.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_def.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_ioreq.h;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Inc\usbd_cdc.h;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pcd.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pcd_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_usb.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_rcc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_gpio.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma_ex.c;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_dma.h;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_dma.c;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_dmamux.h;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_cortex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_exti.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_adc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_adc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_adc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_crc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_crc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_i2c.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_i2c_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rtc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rtc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_spi.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_spi_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_tim.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_tim_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart_ex.c;Middlewares\Third_Party\FatFs\src\diskio.c;Middlewares\Third_Party\FatFs\src\ff.c;Middlewares\Third_Party\FatFs\src\ff_gen_drv.c;Middlewares\Third_Party\FatFs\src\option\syscall.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_core.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ctlreq.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ioreq.c;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Src\usbd_cdc.c;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_pcd.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_pcd_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_usb.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_rcc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_rcc_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_rcc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_bus.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_system.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_utils.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_crs.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_flash.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_flash_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_flash_ramfunc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_gpio.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_gpio_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_gpio.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_dma.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_dma_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_pwr.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_pwr_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_pwr.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_cortex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_cortex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_def.h;Drivers\STM32G0xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_exti.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_exti.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_adc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_adc_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_adc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_crc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_crc_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_crc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_i2c.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_i2c.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_i2c_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_rtc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_rtc.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_rtc_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_spi.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_spi.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_spi_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_tim.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_tim_ex.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_uart.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_usart.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_ll_lpuart.h;Drivers\STM32G0xx_HAL_Driver\Inc\stm32g0xx_hal_uart_ex.h;Middlewares\Third_Party\FatFs\src\diskio.h;Middlewares\Third_Party\FatFs\src\ff.h;Middlewares\Third_Party\FatFs\src\ff_gen_drv.h;Middlewares\Third_Party\FatFs\src\integer.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_core.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_ctlreq.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_def.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_ioreq.h;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Inc\usbd_cdc.h;Drivers\CMSIS\Device\ST\STM32G0xx\Include\stm32g0b1xx.h;Drivers\CMSIS\Device\ST\STM32G0xx\Include\stm32g0xx.h;Drivers\CMSIS\Device\ST\STM32G0xx\Include\system_stm32g0xx.h;Drivers\CMSIS\Device\ST\STM32G0xx\Source\Templates\system_stm32g0xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_armclang_ltm.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv81mml.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm35p.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h; [PreviousUsedCubeIDEFiles] SourceFiles=Core\Src\main.c;Core\Src\gpio.c;Core\Src\adc.c;FATFS\Target\user_diskio.c;FATFS\App\app_fatfs.c;Core\Src\i2c.c;Core\Src\rtc.c;Core\Src\spi.c;Core\Src\usart.c;USB_Device\App\usb_device.c;USB_Device\Target\usbd_conf.c;USB_Device\App\usbd_desc.c;USB_Device\App\usbd_cdc_if.c;Core\Src\stm32g0xx_it.c;Core\Src\stm32g0xx_hal_msp.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pcd.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pcd_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_usb.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_rcc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_gpio.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_dma.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_cortex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_exti.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_adc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_adc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_adc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_i2c.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_i2c_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rtc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rtc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_spi.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_spi_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_tim.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_tim_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart_ex.c;Middlewares\Third_Party\FatFs\src\diskio.c;Middlewares\Third_Party\FatFs\src\ff.c;Middlewares\Third_Party\FatFs\src\ff_gen_drv.c;Middlewares\Third_Party\FatFs\src\option\syscall.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_core.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ctlreq.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ioreq.c;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Src\usbd_cdc.c;Drivers\CMSIS\Device\ST\STM32G0xx\Source\Templates\system_stm32g0xx.c;Core\Src\system_stm32g0xx.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pcd.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pcd_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_usb.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_rcc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_gpio.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_dma.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_cortex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_exti.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_adc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_adc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_adc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_i2c.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_i2c_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rtc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rtc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_spi.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_spi_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_tim.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_tim_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart_ex.c;Middlewares\Third_Party\FatFs\src\diskio.c;Middlewares\Third_Party\FatFs\src\ff.c;Middlewares\Third_Party\FatFs\src\ff_gen_drv.c;Middlewares\Third_Party\FatFs\src\option\syscall.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_core.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ctlreq.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ioreq.c;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Src\usbd_cdc.c;Drivers\CMSIS\Device\ST\STM32G0xx\Source\Templates\system_stm32g0xx.c;Core\Src\system_stm32g0xx.c;;;Middlewares\Third_Party\FatFs\src\diskio.c;Middlewares\Third_Party\FatFs\src\ff.c;Middlewares\Third_Party\FatFs\src\ff_gen_drv.c;Middlewares\Third_Party\FatFs\src\option\syscall.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_core.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ctlreq.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ioreq.c;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Src\usbd_cdc.c; @@ -8,23 +8,24 @@ CDefines=USE_HAL_DRIVER;STM32G0B1xx;USE_HAL_DRIVER;USE_HAL_DRIVER; [PreviousGenFiles] AdvancedFolderStructure=true -HeaderFileListSize=16 +HeaderFileListSize=17 HeaderFiles#0=..\Core\Inc\gpio.h HeaderFiles#1=..\Core\Inc\adc.h -HeaderFiles#2=..\FATFS\Target\ffconf.h -HeaderFiles#3=..\FATFS\Target\user_diskio.h -HeaderFiles#4=..\FATFS\App\app_fatfs.h -HeaderFiles#5=..\Core\Inc\i2c.h -HeaderFiles#6=..\Core\Inc\rtc.h -HeaderFiles#7=..\Core\Inc\spi.h -HeaderFiles#8=..\Core\Inc\usart.h -HeaderFiles#9=..\USB_Device\App\usb_device.h -HeaderFiles#10=..\USB_Device\Target\usbd_conf.h -HeaderFiles#11=..\USB_Device\App\usbd_desc.h -HeaderFiles#12=..\USB_Device\App\usbd_cdc_if.h -HeaderFiles#13=..\Core\Inc\stm32g0xx_it.h -HeaderFiles#14=..\Core\Inc\stm32g0xx_hal_conf.h -HeaderFiles#15=..\Core\Inc\main.h +HeaderFiles#2=..\Core\Inc\crc.h +HeaderFiles#3=..\FATFS\Target\ffconf.h +HeaderFiles#4=..\FATFS\Target\user_diskio.h +HeaderFiles#5=..\FATFS\App\app_fatfs.h +HeaderFiles#6=..\Core\Inc\i2c.h +HeaderFiles#7=..\Core\Inc\rtc.h +HeaderFiles#8=..\Core\Inc\spi.h +HeaderFiles#9=..\Core\Inc\usart.h +HeaderFiles#10=..\USB_Device\App\usb_device.h +HeaderFiles#11=..\USB_Device\Target\usbd_conf.h +HeaderFiles#12=..\USB_Device\App\usbd_desc.h +HeaderFiles#13=..\USB_Device\App\usbd_cdc_if.h +HeaderFiles#14=..\Core\Inc\stm32g0xx_it.h +HeaderFiles#15=..\Core\Inc\stm32g0xx_hal_conf.h +HeaderFiles#16=..\Core\Inc\main.h HeaderFolderListSize=5 HeaderPath#0=..\Core\Inc HeaderPath#1=..\FATFS\Target @@ -32,22 +33,23 @@ HeaderPath#2=..\FATFS\App HeaderPath#3=..\USB_Device\App HeaderPath#4=..\USB_Device\Target HeaderFiles=; -SourceFileListSize=15 +SourceFileListSize=16 SourceFiles#0=..\Core\Src\gpio.c SourceFiles#1=..\Core\Src\adc.c -SourceFiles#2=..\FATFS\Target\user_diskio.c -SourceFiles#3=..\FATFS\App\app_fatfs.c -SourceFiles#4=..\Core\Src\i2c.c -SourceFiles#5=..\Core\Src\rtc.c -SourceFiles#6=..\Core\Src\spi.c -SourceFiles#7=..\Core\Src\usart.c -SourceFiles#8=..\USB_Device\App\usb_device.c -SourceFiles#9=..\USB_Device\Target\usbd_conf.c -SourceFiles#10=..\USB_Device\App\usbd_desc.c -SourceFiles#11=..\USB_Device\App\usbd_cdc_if.c -SourceFiles#12=..\Core\Src\stm32g0xx_it.c -SourceFiles#13=..\Core\Src\stm32g0xx_hal_msp.c -SourceFiles#14=..\Core\Src\main.c +SourceFiles#2=..\Core\Src\crc.c +SourceFiles#3=..\FATFS\Target\user_diskio.c +SourceFiles#4=..\FATFS\App\app_fatfs.c +SourceFiles#5=..\Core\Src\i2c.c +SourceFiles#6=..\Core\Src\rtc.c +SourceFiles#7=..\Core\Src\spi.c +SourceFiles#8=..\Core\Src\usart.c +SourceFiles#9=..\USB_Device\App\usb_device.c +SourceFiles#10=..\USB_Device\Target\usbd_conf.c +SourceFiles#11=..\USB_Device\App\usbd_desc.c +SourceFiles#12=..\USB_Device\App\usbd_cdc_if.c +SourceFiles#13=..\Core\Src\stm32g0xx_it.c +SourceFiles#14=..\Core\Src\stm32g0xx_hal_msp.c +SourceFiles#15=..\Core\Src\main.c SourceFolderListSize=5 SourcePath#0=..\Core\Src SourcePath#1=..\FATFS\Target @@ -56,3 +58,8 @@ SourcePath#3=..\USB_Device\App SourcePath#4=..\USB_Device\Target SourceFiles=; +[PreviousUsedCMakes] +SourceFiles=Core\Src\main.c;Core\Src\gpio.c;Core\Src\adc.c;Core\Src\crc.c;FATFS\Target\user_diskio.c;FATFS\App\app_fatfs.c;Core\Src\i2c.c;Core\Src\rtc.c;Core\Src\spi.c;Core\Src\usart.c;USB_Device\App\usb_device.c;USB_Device\Target\usbd_conf.c;USB_Device\App\usbd_desc.c;USB_Device\App\usbd_cdc_if.c;Core\Src\stm32g0xx_it.c;Core\Src\stm32g0xx_hal_msp.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pcd.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pcd_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_usb.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_rcc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_gpio.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_dma.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_cortex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_exti.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_adc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_adc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_adc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_crc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_crc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_i2c.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_i2c_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rtc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rtc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_spi.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_spi_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_tim.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_tim_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart_ex.c;Middlewares\Third_Party\FatFs\src\diskio.c;Middlewares\Third_Party\FatFs\src\ff.c;Middlewares\Third_Party\FatFs\src\ff_gen_drv.c;Middlewares\Third_Party\FatFs\src\option\syscall.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_core.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ctlreq.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ioreq.c;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Src\usbd_cdc.c;Drivers\CMSIS\Device\ST\STM32G0xx\Source\Templates\system_stm32g0xx.c;Core\Src\system_stm32g0xx.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pcd.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pcd_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_usb.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_rcc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_gpio.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_dma.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_cortex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_exti.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_adc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_adc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_adc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_crc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_crc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_i2c.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_i2c_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rtc.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rtc_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_spi.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_spi_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_tim.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_tim_ex.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart.c;Drivers\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart_ex.c;Middlewares\Third_Party\FatFs\src\diskio.c;Middlewares\Third_Party\FatFs\src\ff.c;Middlewares\Third_Party\FatFs\src\ff_gen_drv.c;Middlewares\Third_Party\FatFs\src\option\syscall.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_core.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ctlreq.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ioreq.c;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Src\usbd_cdc.c;Drivers\CMSIS\Device\ST\STM32G0xx\Source\Templates\system_stm32g0xx.c;Core\Src\system_stm32g0xx.c;;;Middlewares\Third_Party\FatFs\src\diskio.c;Middlewares\Third_Party\FatFs\src\ff.c;Middlewares\Third_Party\FatFs\src\ff_gen_drv.c;Middlewares\Third_Party\FatFs\src\option\syscall.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_core.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ctlreq.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ioreq.c;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Src\usbd_cdc.c; +HeaderPath=Drivers\STM32G0xx_HAL_Driver\Inc;Drivers\STM32G0xx_HAL_Driver\Inc\Legacy;Middlewares\Third_Party\FatFs\src;Middlewares\ST\STM32_USB_Device_Library\Core\Inc;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Inc;Drivers\CMSIS\Device\ST\STM32G0xx\Include;Drivers\CMSIS\Include;Core\Inc;FATFS\Target;FATFS\App;USB_Device\App;USB_Device\Target; +CDefines=USE_HAL_DRIVER;STM32G0B1xx;USE_HAL_DRIVER;USE_HAL_DRIVER; + diff --git a/.project b/.project.bak similarity index 100% rename from .project rename to .project.bak diff --git a/CMakeLists.txt b/CMakeLists.txt new file mode 100644 index 0000000..8308a3d --- /dev/null +++ b/CMakeLists.txt @@ -0,0 +1,68 @@ +cmake_minimum_required(VERSION 3.22) + +# +# This file is generated only once, +# and is not re-generated if converter is called multiple times. +# +# User is free to modify the file as much as necessary +# + +# Setup compiler settings +set(CMAKE_C_STANDARD 11) +set(CMAKE_C_STANDARD_REQUIRED ON) +set(CMAKE_C_EXTENSIONS ON) + + +# Define the build type +if(NOT CMAKE_BUILD_TYPE) + set(CMAKE_BUILD_TYPE "Debug") +endif() + +# Set the project name +set(CMAKE_PROJECT_NAME SW) + +# Include toolchain file +include("cmake/gcc-arm-none-eabi.cmake") + +# Enable compile command to ease indexing with e.g. clangd +set(CMAKE_EXPORT_COMPILE_COMMANDS TRUE) + +# Enable CMake support for ASM and C languages +enable_language(C ASM) + +# Core project settings +project(${CMAKE_PROJECT_NAME}) +message("Build type: " ${CMAKE_BUILD_TYPE}) + +# Create an executable object type +add_executable(${CMAKE_PROJECT_NAME}) + +# Add STM32CubeMX generated sources +add_subdirectory(cmake/stm32cubemx) + +# Link directories setup +target_link_directories(${CMAKE_PROJECT_NAME} PRIVATE + # Add user defined library search paths +) + +# Add sources to executable +target_sources(${CMAKE_PROJECT_NAME} PRIVATE + # Add user sources here +) + +# Add include paths +target_include_directories(${CMAKE_PROJECT_NAME} PRIVATE + # Add user defined include paths +) + +# Add project symbols (macros) +target_compile_definitions(${CMAKE_PROJECT_NAME} PRIVATE + # Add user defined symbols +) + +# Add linked libraries +target_link_libraries(${CMAKE_PROJECT_NAME} + stm32cubemx + + # Add user defined libraries +) diff --git a/CMakePresets.json b/CMakePresets.json new file mode 100644 index 0000000..a86b366 --- /dev/null +++ b/CMakePresets.json @@ -0,0 +1,61 @@ +{ + "version": 3, + "configurePresets": [ + { + "name": "default", + "hidden": true, + "generator": "Ninja", + "binaryDir": "${sourceDir}/build/${presetName}", + "toolchainFile": "${sourceDir}/cmake/gcc-arm-none-eabi.cmake", + "cacheVariables": { + "CMAKE_EXPORT_COMPILE_COMMANDS": "ON" + } + }, + { + "name": "Debug", + "inherits": "default", + "cacheVariables": { + "CMAKE_BUILD_TYPE": "Debug" + } + }, + { + "name": "RelWithDebInfo", + "inherits": "default", + "cacheVariables": { + "CMAKE_BUILD_TYPE": "RelWithDebInfo" + } + }, + { + "name": "Release", + "inherits": "default", + "cacheVariables": { + "CMAKE_BUILD_TYPE": "Release" + } + }, + { + "name": "MinSizeRel", + "inherits": "default", + "cacheVariables": { + "CMAKE_BUILD_TYPE": "MinSizeRel" + } + } + ], + "buildPresets": [ + { + "name": "Debug", + "configurePreset": "Debug" + }, + { + "name": "RelWithDebInfo", + "configurePreset": "RelWithDebInfo" + }, + { + "name": "Release", + "configurePreset": "Release" + }, + { + "name": "MinSizeRel", + "configurePreset": "MinSizeRel" + } + ] +} \ No newline at end of file diff --git a/Core/Src/main.c b/Core/Src/main.c index 07c918e..ad37a39 100644 --- a/Core/Src/main.c +++ b/Core/Src/main.c @@ -1,20 +1,20 @@ /* USER CODE BEGIN Header */ /** - ****************************************************************************** - * @file : main.c - * @brief : Main program body - ****************************************************************************** - * @attention - * - * Copyright (c) 2024 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ + ****************************************************************************** + * @file : main.c + * @brief : Main program body + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ /* USER CODE END Header */ /* Includes ------------------------------------------------------------------*/ #include "main.h" @@ -53,7 +53,7 @@ /* Private variables ---------------------------------------------------------*/ /* USER CODE BEGIN PV */ - +char buf[256] = {0}; /* USER CODE END PV */ /* Private function prototypes -----------------------------------------------*/ @@ -68,129 +68,133 @@ void SystemClock_Config(void); /* USER CODE END 0 */ /** - * @brief The application entry point. - * @retval int - */ + * @brief The application entry point. + * @retval int + */ int main(void) { - /* USER CODE BEGIN 1 */ + /* USER CODE BEGIN 1 */ + float temp; + float rh; + int len; + /* USER CODE END 1 */ - /* USER CODE END 1 */ + /* MCU Configuration--------------------------------------------------------*/ - /* MCU Configuration--------------------------------------------------------*/ + /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ + HAL_Init(); - /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ - HAL_Init(); + /* USER CODE BEGIN Init */ - /* USER CODE BEGIN Init */ + /* USER CODE END Init */ - /* USER CODE END Init */ + /* Configure the system clock */ + SystemClock_Config(); - /* Configure the system clock */ - SystemClock_Config(); + /* USER CODE BEGIN SysInit */ - /* USER CODE BEGIN SysInit */ + /* USER CODE END SysInit */ - /* USER CODE END SysInit */ + /* Initialize all configured peripherals */ + MX_GPIO_Init(); + MX_I2C1_Init(); + MX_RTC_Init(); + MX_SPI1_Init(); + MX_USART1_UART_Init(); + if (MX_FATFS_Init() != APP_OK) + { + Error_Handler(); + } + MX_USB_Device_Init(); + MX_ADC1_Init(); + MX_CRC_Init(); + /* USER CODE BEGIN 2 */ - /* Initialize all configured peripherals */ - MX_GPIO_Init(); - MX_I2C1_Init(); - MX_RTC_Init(); - MX_SPI1_Init(); - MX_USART1_UART_Init(); - if (MX_FATFS_Init() != APP_OK) { - Error_Handler(); - } - MX_USB_Device_Init(); - MX_ADC1_Init(); - MX_CRC_Init(); - /* USER CODE BEGIN 2 */ + // Turn on battery power, active high + HAL_GPIO_WritePin(PWR_HOLDUP_GPIO_Port, PWR_HOLDUP_Pin, GPIO_PIN_SET); + // Turn on SD Card power, active low + HAL_GPIO_WritePin(SD_PWR_EN_GPIO_Port, SD_PWR_EN_Pin, GPIO_PIN_RESET); - // Turn on battery power, active high - HAL_GPIO_WritePin(PWR_HOLDUP_GPIO_Port, PWR_HOLDUP_Pin, GPIO_PIN_SET); - // Turn on SD Card power, active low - HAL_GPIO_WritePin(SD_PWR_EN_GPIO_Port, SD_PWR_EN_Pin, GPIO_PIN_RESET); + static uint32_t prev_tick = 0; - static uint32_t prev_tick = 0; + if (HAL_OK == sht40_init(&hi2c1)) + { + sht40_read(); + } + IS66_init(&hspi1); - if (HAL_OK == sht40_init(&hi2c1)) - { - sht40_read(); - } + /* USER CODE END 2 */ - IS66_init(&hspi1); + /* Infinite loop */ + /* USER CODE BEGIN WHILE */ + while (1) + { + uint32_t tick = HAL_GetTick(); + if ((tick - prev_tick) >= 500) + { + prev_tick = tick; + HAL_GPIO_TogglePin(LED_GPIO_Port, LED_Pin); - /* USER CODE END 2 */ + sht40_read(); + temp = sht40_get_temp_C(); + rh = sht40_get_rh(); + len = snprintf(buf, 128, "Temp: %03.2fC\tRH: %02.1f\r\n", temp, rh); + CDC_Transmit_FS((uint8_t *)buf, len); + } + /* USER CODE END WHILE */ - /* Infinite loop */ - /* USER CODE BEGIN WHILE */ - while (1) - { - uint32_t tick = HAL_GetTick(); - if ((tick - prev_tick) >= 500) - { - prev_tick = tick; - HAL_GPIO_TogglePin(LED_GPIO_Port, LED_Pin); - // CDC_Transmit_FS(buffer, sizeof(buffer)); - - } - /* USER CODE END WHILE */ - - /* USER CODE BEGIN 3 */ - } - /* USER CODE END 3 */ + /* USER CODE BEGIN 3 */ + } + /* USER CODE END 3 */ } /** - * @brief System Clock Configuration - * @retval None - */ + * @brief System Clock Configuration + * @retval None + */ void SystemClock_Config(void) { - RCC_OscInitTypeDef RCC_OscInitStruct = {0}; - RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - /** Configure the main internal regulator output voltage - */ - HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1); + /** Configure the main internal regulator output voltage + */ + HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1); - /** Initializes the RCC Oscillators according to the specified parameters - * in the RCC_OscInitTypeDef structure. - */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSI - |RCC_OSCILLATORTYPE_HSI48; - RCC_OscInitStruct.HSIState = RCC_HSI_ON; - RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; - RCC_OscInitStruct.HSIDiv = RCC_HSI_DIV1; - RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; - RCC_OscInitStruct.LSIState = RCC_LSI_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; - RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV1; - RCC_OscInitStruct.PLL.PLLN = 8; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV5; - RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV8; - if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) - { - Error_Handler(); - } + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_HSI48; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + RCC_OscInitStruct.HSIDiv = RCC_HSI_DIV1; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.LSIState = RCC_LSI_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV1; + RCC_OscInitStruct.PLL.PLLN = 8; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV5; + RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV8; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } - /** Initializes the CPU, AHB and APB buses clocks - */ - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK - |RCC_CLOCKTYPE_PCLK1; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK) - { - Error_Handler(); - } + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK) + { + Error_Handler(); + } } /* USER CODE BEGIN 4 */ @@ -198,33 +202,33 @@ void SystemClock_Config(void) /* USER CODE END 4 */ /** - * @brief This function is executed in case of error occurrence. - * @retval None - */ + * @brief This function is executed in case of error occurrence. + * @retval None + */ void Error_Handler(void) { - /* USER CODE BEGIN Error_Handler_Debug */ - /* User can add his own implementation to report the HAL error return state */ - __disable_irq(); - while (1) - { - } - /* USER CODE END Error_Handler_Debug */ + /* USER CODE BEGIN Error_Handler_Debug */ + /* User can add his own implementation to report the HAL error return state */ + __disable_irq(); + while (1) + { + } + /* USER CODE END Error_Handler_Debug */ } -#ifdef USE_FULL_ASSERT +#ifdef USE_FULL_ASSERT /** - * @brief Reports the name of the source file and the source line number - * where the assert_param error has occurred. - * @param file: pointer to the source file name - * @param line: assert_param error line source number - * @retval None - */ + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ void assert_failed(uint8_t *file, uint32_t line) { - /* USER CODE BEGIN 6 */ - /* User can add his own implementation to report the file name and line number, - ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - /* USER CODE END 6 */ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ } #endif /* USE_FULL_ASSERT */ diff --git a/Core/Src/sht_40.c b/Core/Src/sht_40.c index a302bc4..78e0eab 100644 --- a/Core/Src/sht_40.c +++ b/Core/Src/sht_40.c @@ -41,7 +41,7 @@ static float m_temperature_F; uint32_t sht40_init(I2C_HandleTypeDef *hi2c) { uint32_t ret = 0; - + // Store I2C interface m_hi2c = hi2c; @@ -60,7 +60,7 @@ uint32_t sht40_init(I2C_HandleTypeDef *hi2c) /* - * TODO: Convert to fixed point or floating point + * */ uint32_t sht40_read(void) { diff --git a/Core/Src/syscalls.c b/Core/Src/syscalls.c index f3462a0..e33a849 100644 --- a/Core/Src/syscalls.c +++ b/Core/Src/syscalls.c @@ -1,8 +1,8 @@ /** ****************************************************************************** * @file syscalls.c - * @author Auto-generated by STM32CubeIDE - * @brief STM32CubeIDE Minimal System calls file + * @author Auto-generated by STM32CubeMX + * @brief Minimal System calls file * * For more information about which c-functions * need which of these lowlevel functions diff --git a/Core/Src/sysmem.c b/Core/Src/sysmem.c index 6122419..246470e 100644 --- a/Core/Src/sysmem.c +++ b/Core/Src/sysmem.c @@ -1,8 +1,8 @@ /** ****************************************************************************** * @file sysmem.c - * @author Generated by STM32CubeIDE - * @brief STM32CubeIDE System Memory calls file + * @author Generated by STM32CubeMX + * @brief System Memory calls file * * For more information about which C functions * need which of these lowlevel functions diff --git a/Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g0b1xx.h b/Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g0b1xx.h new file mode 100644 index 0000000..b97b009 --- /dev/null +++ b/Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g0b1xx.h @@ -0,0 +1,11273 @@ +/** + ****************************************************************************** + * @file stm32g0b1xx.h + * @author MCD Application Team + * @brief CMSIS Cortex-M0+ Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for stm32g0b1xx devices. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral's registers hardware + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018-2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32g0b1xx + * @{ + */ + +#ifndef STM32G0B1xx_H +#define STM32G0B1xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M0+ Processor and Core Peripherals + */ +#define __CM0PLUS_REV 0U /*!< Core Revision r0p0 */ +#define __MPU_PRESENT 1U /*!< STM32G0xx provides an MPU */ +#define __VTOR_PRESENT 1U /*!< Vector Table Register supported */ +#define __NVIC_PRIO_BITS 2U /*!< STM32G0xx uses 2 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief stm32g0b1xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + +/*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M0+ Processor Exceptions Numbers ***************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M Hard Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M SV Call Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M System Tick Interrupt */ +/****** STM32G0xxxx specific Interrupt Numbers ****************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_VDDIO2_IRQn = 1, /*!< PVD through EXTI line 16, PVM (monit. VDDIO2) through EXTI line 34*/ + RTC_TAMP_IRQn = 2, /*!< RTC interrupt through the EXTI line 19 & 21 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_CRS_IRQn = 4, /*!< RCC and CRS global Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + USB_UCPD1_2_IRQn = 8, /*!< USB, UCPD1 and UCPD2 global Interrupt */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn = 11, /*!< DMA1 Ch4 to Ch7, DMA2 Ch1 to Ch5 and DMAMUX1 Overrun Interrupts */ + ADC1_COMP_IRQn = 12, /*!< ADC1, COMP1,COMP2, COMP3 Interrupts (combined with EXTI 17 & 18) */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 15, /*!< TIM2 Interrupt */ + TIM3_TIM4_IRQn = 16, /*!< TIM3, TIM4 global Interrupt */ + TIM6_DAC_LPTIM1_IRQn = 17, /*!< TIM6, DAC and LPTIM1 global Interrupts */ + TIM7_LPTIM2_IRQn = 18, /*!< TIM7 and LPTIM2 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM15_IRQn = 20, /*!< TIM15 global Interrupt */ + TIM16_FDCAN_IT0_IRQn = 21, /*!< TIM16, FDCAN1_IT0 and FDCAN2_IT0 Interrupt */ + TIM17_FDCAN_IT1_IRQn = 22, /*!< TIM17, FDCAN1_IT1 and FDCAN2_IT1 Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt (combined with EXTI 23) */ + I2C2_3_IRQn = 24, /*!< I2C2, I2C3 Interrupt (combined with EXTI 24 and EXTI 22) */ + SPI1_IRQn = 25, /*!< SPI1/I2S1 Interrupt */ + SPI2_3_IRQn = 26, /*!< SPI2/I2S2, SPI3/I2S3 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_LPUART2_IRQn = 28, /*!< USART2 + LPUART2 Interrupt */ + USART3_4_5_6_LPUART1_IRQn = 29, /*!< USART3, USART4, USART5, USART6, LPUART1 globlal Interrupts (combined with EXTI 28) */ + CEC_IRQn = 30, /*!< CEC Interrupt(combined with EXTI 27) */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm0plus.h" /* Cortex-M0+ processor and core peripherals */ +#include "system_stm32g0xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t AWD1TR; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t AWD2TR; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */ + __IO uint32_t AWD3TR; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x2C */ + uint32_t RESERVED3[4]; /*!< Reserved, 0x30 - 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED4[23];/*!< Reserved, 0x44 - 0x9C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 2 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 configuration register, Address offset: 0xA4 */ + uint32_t RESERVED5[3]; /*!< Reserved, 0xA8 - 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC Calibration factor register, Address offset: 0xB4 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + +/* Legacy registers naming */ +#define TR1 AWD1TR +#define TR2 AWD2TR +#define TR3 AWD3TR + +/** + * @brief FD Controller Area Network + */ + +typedef struct +{ + __IO uint32_t CREL; /*!< FDCAN Core Release register, Address offset: 0x000 */ + __IO uint32_t ENDN; /*!< FDCAN Endian register, Address offset: 0x004 */ + uint32_t RESERVED1; /*!< Reserved, 0x008 */ + __IO uint32_t DBTP; /*!< FDCAN Data Bit Timing & Prescaler register, Address offset: 0x00C */ + __IO uint32_t TEST; /*!< FDCAN Test register, Address offset: 0x010 */ + __IO uint32_t RWD; /*!< FDCAN RAM Watchdog register, Address offset: 0x014 */ + __IO uint32_t CCCR; /*!< FDCAN CC Control register, Address offset: 0x018 */ + __IO uint32_t NBTP; /*!< FDCAN Nominal Bit Timing & Prescaler register, Address offset: 0x01C */ + __IO uint32_t TSCC; /*!< FDCAN Timestamp Counter Configuration register, Address offset: 0x020 */ + __IO uint32_t TSCV; /*!< FDCAN Timestamp Counter Value register, Address offset: 0x024 */ + __IO uint32_t TOCC; /*!< FDCAN Timeout Counter Configuration register, Address offset: 0x028 */ + __IO uint32_t TOCV; /*!< FDCAN Timeout Counter Value register, Address offset: 0x02C */ + uint32_t RESERVED2[4]; /*!< Reserved, 0x030 - 0x03C */ + __IO uint32_t ECR; /*!< FDCAN Error Counter register, Address offset: 0x040 */ + __IO uint32_t PSR; /*!< FDCAN Protocol Status register, Address offset: 0x044 */ + __IO uint32_t TDCR; /*!< FDCAN Transmitter Delay Compensation register, Address offset: 0x048 */ + uint32_t RESERVED3; /*!< Reserved, 0x04C */ + __IO uint32_t IR; /*!< FDCAN Interrupt register, Address offset: 0x050 */ + __IO uint32_t IE; /*!< FDCAN Interrupt Enable register, Address offset: 0x054 */ + __IO uint32_t ILS; /*!< FDCAN Interrupt Line Select register, Address offset: 0x058 */ + __IO uint32_t ILE; /*!< FDCAN Interrupt Line Enable register, Address offset: 0x05C */ + uint32_t RESERVED4[8]; /*!< Reserved, 0x060 - 0x07C */ + __IO uint32_t RXGFC; /*!< FDCAN Global Filter Configuration register, Address offset: 0x080 */ + __IO uint32_t XIDAM; /*!< FDCAN Extended ID AND Mask register, Address offset: 0x084 */ + __IO uint32_t HPMS; /*!< FDCAN High Priority Message Status register, Address offset: 0x088 */ + uint32_t RESERVED5; /*!< Reserved, 0x08C */ + __IO uint32_t RXF0S; /*!< FDCAN Rx FIFO 0 Status register, Address offset: 0x090 */ + __IO uint32_t RXF0A; /*!< FDCAN Rx FIFO 0 Acknowledge register, Address offset: 0x094 */ + __IO uint32_t RXF1S; /*!< FDCAN Rx FIFO 1 Status register, Address offset: 0x098 */ + __IO uint32_t RXF1A; /*!< FDCAN Rx FIFO 1 Acknowledge register, Address offset: 0x09C */ + uint32_t RESERVED6[8]; /*!< Reserved, 0x0A0 - 0x0BC */ + __IO uint32_t TXBC; /*!< FDCAN Tx Buffer Configuration register, Address offset: 0x0C0 */ + __IO uint32_t TXFQS; /*!< FDCAN Tx FIFO/Queue Status register, Address offset: 0x0C4 */ + __IO uint32_t TXBRP; /*!< FDCAN Tx Buffer Request Pending register, Address offset: 0x0C8 */ + __IO uint32_t TXBAR; /*!< FDCAN Tx Buffer Add Request register, Address offset: 0x0CC */ + __IO uint32_t TXBCR; /*!< FDCAN Tx Buffer Cancellation Request register, Address offset: 0x0D0 */ + __IO uint32_t TXBTO; /*!< FDCAN Tx Buffer Transmission Occurred register, Address offset: 0x0D4 */ + __IO uint32_t TXBCF; /*!< FDCAN Tx Buffer Cancellation Finished register, Address offset: 0x0D8 */ + __IO uint32_t TXBTIE; /*!< FDCAN Tx Buffer Transmission Interrupt Enable register, Address offset: 0x0DC */ + __IO uint32_t TXBCIE; /*!< FDCAN Tx Buffer Cancellation Finished Interrupt Enable register, Address offset: 0x0E0 */ + __IO uint32_t TXEFS; /*!< FDCAN Tx Event FIFO Status register, Address offset: 0x0E4 */ + __IO uint32_t TXEFA; /*!< FDCAN Tx Event FIFO Acknowledge register, Address offset: 0x0E8 */ +} FDCAN_GlobalTypeDef; + +/** + * @brief FD Controller Area Network Configuration + */ + +typedef struct +{ + __IO uint32_t CKDIV; /*!< FDCAN clock divider register, Address offset: 0x100 + 0x000 */ +} FDCAN_Config_TypeDef; + +/** + * @brief HDMI-CEC + */ +typedef struct +{ + __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */ + __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */ + __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */ + __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */ + __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */ + __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */ +}CEC_TypeDef; + +/** + * @brief Comparator + */ +typedef struct +{ + __IO uint32_t CSR; /*!< COMP control and status register, Address offset: 0x00 */ +} COMP_TypeDef; + +typedef struct +{ + __IO uint32_t CSR_ODD; /*!< COMP control and status register located in register of comparator instance odd (exception for STM32G0 devices featuring ADC3 instance: in common group of COMP2 and COMP3, instances odd and even are inverted), used for bits common to several COMP instances, Address offset: 0x00 */ + __IO uint32_t CSR_EVEN; /*!< COMP control and status register located in register of comparator instance even (exception for STM32G0 devices featuring ADC3 instance: in common group of COMP2 and COMP3, instances odd and even are inverted), used for bits common to several COMP instances, Address offset: 0x04 */ +} COMP_Common_TypeDef; + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Clock Recovery System + */ +typedef struct +{ +__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */ +__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */ +__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */ +__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */ +} CRS_TypeDef; +/** + * @brief Digital to Analog Converter + */ +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ + __IO uint32_t CCR; /*!< DAC calibration control register, Address offset: 0x38 */ + __IO uint32_t MCR; /*!< DAC mode control register, Address offset: 0x3C */ + __IO uint32_t SHSR1; /*!< DAC Sample and Hold sample time register 1, Address offset: 0x40 */ + __IO uint32_t SHSR2; /*!< DAC Sample and Hold sample time register 2, Address offset: 0x44 */ + __IO uint32_t SHHR; /*!< DAC Sample and Hold hold time register, Address offset: 0x48 */ + __IO uint32_t SHRR; /*!< DAC Sample and Hold refresh time register, Address offset: 0x4C */ +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug configuration register, Address offset: 0x04 */ + __IO uint32_t APBFZ1; /*!< Debug APB freeze register 1, Address offset: 0x08 */ + __IO uint32_t APBFZ2; /*!< Debug APB freeze register 2, Address offset: 0x0C */ +} DBG_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief Asynch Interrupt/Event Controller (EXTI) + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI Rising Trigger Selection Register 1, Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI Falling Trigger Selection Register 1, Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI Software Interrupt event Register 1, Address offset: 0x08 */ + __IO uint32_t RPR1; /*!< EXTI Rising Pending Register 1, Address offset: 0x0C */ + __IO uint32_t FPR1; /*!< EXTI Falling Pending Register 1, Address offset: 0x10 */ + uint32_t RESERVED1[3]; /*!< Reserved 1, 0x14 -- 0x1C */ + __IO uint32_t RTSR2; /*!< EXTI Rising Trigger Selection Register 2, Address offset: 0x20 */ + __IO uint32_t FTSR2; /*!< EXTI Falling Trigger Selection Register 2, Address offset: 0x24 */ + __IO uint32_t SWIER2; /*!< EXTI Software Interrupt event Register 2, Address offset: 0x28 */ + __IO uint32_t RPR2; /*!< EXTI Rising Pending Register 2, Address offset: 0x2C */ + __IO uint32_t FPR2; /*!< EXTI Falling Pending Register 2, Address offset: 0x30 */ + uint32_t RESERVED3[11]; /*!< Reserved 3, 0x34 -- 0x5C */ + __IO uint32_t EXTICR[4]; /*!< EXTI External Interrupt Configuration Register, 0x60 -- 0x6C */ + uint32_t RESERVED4[4]; /*!< Reserved 4, 0x70 -- 0x7C */ + __IO uint32_t IMR1; /*!< EXTI Interrupt Mask Register 1, Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI Event Mask Register 1, Address offset: 0x84 */ + uint32_t RESERVED5[2]; /*!< Reserved 5, 0x88 -- 0x8C */ + __IO uint32_t IMR2; /*!< EXTI Interrupt Mask Register 2, Address offset: 0x90 */ + __IO uint32_t EMR2; /*!< EXTI Event Mask Register 2, Address offset: 0x94 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access Control register, Address offset: 0x00 */ + uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC bank 1 register, Address offset: 0x18 */ + __IO uint32_t ECC2R; /*!< FLASH ECC bank 2 register, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + __IO uint32_t PCROP1ASR; /*!< FLASH Bank PCROP area A Start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1AER; /*!< FLASH Bank PCROP area A End address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank WRP area B address register, Address offset: 0x30 */ + __IO uint32_t PCROP1BSR; /*!< FLASH Bank PCROP area B Start address register, Address offset: 0x34 */ + __IO uint32_t PCROP1BER; /*!< FLASH Bank PCROP area B End address register, Address offset: 0x38 */ + uint32_t RESERVED5[2]; /*!< Reserved5, Address offset: 0x3C--0x40 */ + __IO uint32_t PCROP2ASR; /*!< FLASH Bank2 PCROP area A Start address register, Address offset: 0x44 */ + __IO uint32_t PCROP2AER; /*!< FLASH Bank2 PCROP area A End address register, Address offset: 0x48 */ + __IO uint32_t WRP2AR; /*!< FLASH Bank2 WRP area A address register, Address offset: 0x4C */ + __IO uint32_t WRP2BR; /*!< FLASH Bank2 WRP area B address register, Address offset: 0x50 */ + __IO uint32_t PCROP2BSR; /*!< FLASH Bank2 PCROP area B Start address register, Address offset: 0x54 */ + __IO uint32_t PCROP2BER; /*!< FLASH Bank2 PCROP area B End address register, Address offset: 0x58 */ + uint32_t RESERVED7[9]; /*!< Reserved7, Address offset: 0x5C--0x7C */ + __IO uint32_t SECR; /*!< FLASH security register , Address offset: 0x80 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x20 */ + __IO uint32_t CFGR2; /*!< LPTIM Option register, Address offset: 0x24 */ +} LPTIM_TypeDef; + + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< PWR Power Control Register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Clear Register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + __IO uint32_t PUCRD; /*!< PWR Pull-Up Control Register of port D, Address offset: 0x38 */ + __IO uint32_t PDCRD; /*!< PWR Pull-Down Control Register of port D, Address offset: 0x3C */ + __IO uint32_t PUCRE; /*!< PWR Pull-Up Control Register of port E, Address offset: 0x40 */ + __IO uint32_t PDCRE; /*!< PWR Pull-Down Control Register of port E, Address offset: 0x44 */ + __IO uint32_t PUCRF; /*!< PWR Pull-Up Control Register of port F, Address offset: 0x48 */ + __IO uint32_t PDCRF; /*!< PWR Pull-Down Control Register of port F, Address offset: 0x4C */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC Clock Sources Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Regulated Domain Clocks Configuration Register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC System PLL configuration Register, Address offset: 0x0C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x10 */ + __IO uint32_t CRRCR; /*!< RCC Clock Configuration Register, Address offset: 0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ + __IO uint32_t IOPRSTR; /*!< RCC IO port reset register, Address offset: 0x24 */ + __IO uint32_t AHBRSTR; /*!< RCC AHB peripherals reset register, Address offset: 0x28 */ + __IO uint32_t APBRSTR1; /*!< RCC APB peripherals reset register 1, Address offset: 0x2C */ + __IO uint32_t APBRSTR2; /*!< RCC APB peripherals reset register 2, Address offset: 0x30 */ + __IO uint32_t IOPENR; /*!< RCC IO port enable register, Address offset: 0x34 */ + __IO uint32_t AHBENR; /*!< RCC AHB peripherals clock enable register, Address offset: 0x38 */ + __IO uint32_t APBENR1; /*!< RCC APB peripherals clock enable register1, Address offset: 0x3C */ + __IO uint32_t APBENR2; /*!< RCC APB peripherals clock enable register2, Address offset: 0x40 */ + __IO uint32_t IOPSMENR; /*!< RCC IO port clocks enable in sleep mode register, Address offset: 0x44 */ + __IO uint32_t AHBSMENR; /*!< RCC AHB peripheral clocks enable in sleep mode register, Address offset: 0x48 */ + __IO uint32_t APBSMENR1; /*!< RCC APB peripheral clocks enable in sleep mode register1, Address offset: 0x4C */ + __IO uint32_t APBSMENR2; /*!< RCC APB peripheral clocks enable in sleep mode register2, Address offset: 0x50 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Independent Clocks Configuration Register, Address offset: 0x54 */ + __IO uint32_t CCIPR2; /*!< RCC Peripherals Independent Clocks Configuration Register2, Address offset: 0x58 */ + __IO uint32_t BDCR; /*!< RCC Backup Domain Control Register, Address offset: 0x5C */ + __IO uint32_t CSR; /*!< RCC Unregulated Domain Clock Control and Status Register, Address offset: 0x60 */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x08 */ + __IO uint32_t ICSR; /*!< RTC initialization control and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x1C */ + uint32_t RESERVED1; /*!< Reserved Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x1C */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x48 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x4C */ + __IO uint32_t SR; /*!< RTC Status register, Address offset: 0x50 */ + __IO uint32_t MISR; /*!< RTC Masked Interrupt Status register, Address offset: 0x54 */ + uint32_t RESERVED3; /*!< Reserved Address offset: 0x58 */ + __IO uint32_t SCR; /*!< RTC Status Clear register, Address offset: 0x5C */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x60 */ +} RTC_TypeDef; + +/** + * @brief Tamper and backup registers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TAMP configuration register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TAMP configuration register 2, Address offset: 0x04 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x08 */ + __IO uint32_t FLTCR; /*!< Reserved Address offset: 0x0C */ + uint32_t RESERVED1[7]; /*!< Reserved Address offset: 0x10 -- 0x28 */ + __IO uint32_t IER; /*!< TAMP Interrupt enable register, Address offset: 0x2C */ + __IO uint32_t SR; /*!< TAMP Status register, Address offset: 0x30 */ + __IO uint32_t MISR; /*!< TAMP Masked Interrupt Status register, Address offset: 0x34 */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x38 */ + __IO uint32_t SCR; /*!< TAMP Status clear register, Address offset: 0x3C */ + uint32_t RESERVED3[48]; /*!< Reserved Address offset: 0x54 -- 0xFC */ + __IO uint32_t BKP0R; /*!< TAMP backup register 0, Address offset: 0x100 */ + __IO uint32_t BKP1R; /*!< TAMP backup register 1, Address offset: 0x104 */ + __IO uint32_t BKP2R; /*!< TAMP backup register 2, Address offset: 0x108 */ + __IO uint32_t BKP3R; /*!< TAMP backup register 3, Address offset: 0x10C */ + __IO uint32_t BKP4R; /*!< TAMP backup register 4, Address offset: 0x110 */ +} TAMP_TypeDef; + + /** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */ + uint32_t RESERVED0[5]; /*!< Reserved, 0x04 --0x14 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */ + uint32_t RESERVED1[25]; /*!< Reserved 0x1C */ + __IO uint32_t IT_LINE_SR[32]; /*!< SYSCFG configuration IT_LINE register, Address offset: 0x80 */ +} SYSCFG_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR1; /*!< TIM option register, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function register 2, Address offset: 0x64 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x68 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + +/** + * @brief Universal Serial Bus Full Speed Dual Role Device + */ + +typedef struct +{ + __IO uint32_t CHEP0R; /*!< USB Channel/Endpoint 0 register, Address offset: 0x00 */ + __IO uint32_t CHEP1R; /*!< USB Channel/Endpoint 1 register, Address offset: 0x04 */ + __IO uint32_t CHEP2R; /*!< USB Channel/Endpoint 2 register, Address offset: 0x08 */ + __IO uint32_t CHEP3R; /*!< USB Channel/Endpoint 3 register, Address offset: 0x0C */ + __IO uint32_t CHEP4R; /*!< USB Channel/Endpoint 4 register, Address offset: 0x10 */ + __IO uint32_t CHEP5R; /*!< USB Channel/Endpoint 5 register, Address offset: 0x14 */ + __IO uint32_t CHEP6R; /*!< USB Channel/Endpoint 6 register, Address offset: 0x18 */ + __IO uint32_t CHEP7R; /*!< USB Channel/Endpoint 7 register, Address offset: 0x1C */ + __IO uint32_t RESERVED0[8]; /*!< Reserved, */ + __IO uint32_t CNTR; /*!< Control register, Address offset: 0x40 */ + __IO uint32_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */ + __IO uint32_t FNR; /*!< Frame number register, Address offset: 0x48 */ + __IO uint32_t DADDR; /*!< Device address register, Address offset: 0x4C */ + __IO uint32_t RESERVED1; /*!< Reserved */ + __IO uint32_t LPMCSR; /*!< LPM Control and Status register, Address offset: 0x54 */ + __IO uint32_t BCDR; /*!< Battery Charging detector register, Address offset: 0x58 */ +} USB_DRD_TypeDef; + +/** + * @brief Universal Serial Bus PacketMemoryArea Buffer Descriptor Table + */ +typedef struct +{ + __IO uint32_t TXBD; /*!*/ +#define DAC_CR_CEN1_Pos (14U) +#define DAC_CR_CEN1_Msk (0x1UL << DAC_CR_CEN1_Pos) /*!< 0x00004000 */ +#define DAC_CR_CEN1 DAC_CR_CEN1_Msk /*!*/ + +#define DAC_CR_EN2_Pos (16U) +#define DAC_CR_EN2_Msk (0x1UL << DAC_CR_EN2_Pos) /*!< 0x00010000 */ +#define DAC_CR_EN2 DAC_CR_EN2_Msk /*!*/ +#define DAC_CR_CEN2_Pos (30U) +#define DAC_CR_CEN2_Msk (0x1UL << DAC_CR_CEN2_Pos) /*!< 0x40000000 */ +#define DAC_CR_CEN2 DAC_CR_CEN2_Msk /*!*/ + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1_Pos (0U) +#define DAC_SWTRIGR_SWTRIG1_Msk (0x1UL << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */ +#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*! */ +#define RTC_ICSR_ALRBWF_Pos (1U) +#define RTC_ICSR_ALRBWF_Msk (0x1UL << RTC_ICSR_ALRBWF_Pos) /*!< 0x00000002 */ +#define RTC_ICSR_ALRBWF RTC_ICSR_ALRBWF_Msk +#define RTC_ICSR_ALRAWF_Pos (0U) +#define RTC_ICSR_ALRAWF_Msk (0x1UL << RTC_ICSR_ALRAWF_Pos) /*!< 0x00000001 */ +#define RTC_ICSR_ALRAWF RTC_ICSR_ALRAWF_Msk + +/******************** Bits definition for RTC_PRER register *****************/ +#define RTC_PRER_PREDIV_A_Pos (16U) +#define RTC_PRER_PREDIV_A_Msk (0x7FUL << RTC_PRER_PREDIV_A_Pos) /*!< 0x007F0000 */ +#define RTC_PRER_PREDIV_A RTC_PRER_PREDIV_A_Msk +#define RTC_PRER_PREDIV_S_Pos (0U) +#define RTC_PRER_PREDIV_S_Msk (0x7FFFUL << RTC_PRER_PREDIV_S_Pos) /*!< 0x00007FFF */ +#define RTC_PRER_PREDIV_S RTC_PRER_PREDIV_S_Msk + +/******************** Bits definition for RTC_WUTR register *****************/ +#define RTC_WUTR_WUT_Pos (0U) +#define RTC_WUTR_WUT_Msk (0xFFFFUL << RTC_WUTR_WUT_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUT RTC_WUTR_WUT_Msk /*!< Wakeup auto-reload value bits > */ + +/******************** Bits definition for RTC_CR register *******************/ +#define RTC_CR_OUT2EN_Pos (31U) +#define RTC_CR_OUT2EN_Msk (0x1UL << RTC_CR_OUT2EN_Pos) /*!< 0x80000000 */ +#define RTC_CR_OUT2EN RTC_CR_OUT2EN_Msk /*!< RTC_OUT2 output enable */ +#define RTC_CR_TAMPALRM_TYPE_Pos (30U) +#define RTC_CR_TAMPALRM_TYPE_Msk (0x1UL << RTC_CR_TAMPALRM_TYPE_Pos) /*!< 0x40000000 */ +#define RTC_CR_TAMPALRM_TYPE RTC_CR_TAMPALRM_TYPE_Msk /*!< TAMPALARM output type */ +#define RTC_CR_TAMPALRM_PU_Pos (29U) +#define RTC_CR_TAMPALRM_PU_Msk (0x1UL << RTC_CR_TAMPALRM_PU_Pos) /*!< 0x20000000 */ +#define RTC_CR_TAMPALRM_PU RTC_CR_TAMPALRM_PU_Msk /*!< TAMPALARM output pull-up config */ +#define RTC_CR_TAMPOE_Pos (26U) +#define RTC_CR_TAMPOE_Msk (0x1UL << RTC_CR_TAMPOE_Pos) /*!< 0x04000000 */ +#define RTC_CR_TAMPOE RTC_CR_TAMPOE_Msk /*!< Tamper detection output enable on TAMPALARM */ +#define RTC_CR_TAMPTS_Pos (25U) +#define RTC_CR_TAMPTS_Msk (0x1UL << RTC_CR_TAMPTS_Pos) /*!< 0x02000000 */ +#define RTC_CR_TAMPTS RTC_CR_TAMPTS_Msk /*!< Activate timestamp on tamper detection event */ +#define RTC_CR_ITSE_Pos (24U) +#define RTC_CR_ITSE_Msk (0x1UL << RTC_CR_ITSE_Pos) /*!< 0x01000000 */ +#define RTC_CR_ITSE RTC_CR_ITSE_Msk /*!< Timestamp on internal event enable */ +#define RTC_CR_COE_Pos (23U) +#define RTC_CR_COE_Msk (0x1UL << RTC_CR_COE_Pos) /*!< 0x00800000 */ +#define RTC_CR_COE RTC_CR_COE_Msk +#define RTC_CR_OSEL_Pos (21U) +#define RTC_CR_OSEL_Msk (0x3UL << RTC_CR_OSEL_Pos) /*!< 0x00600000 */ +#define RTC_CR_OSEL RTC_CR_OSEL_Msk +#define RTC_CR_OSEL_0 (0x1UL << RTC_CR_OSEL_Pos) /*!< 0x00200000 */ +#define RTC_CR_OSEL_1 (0x2UL << RTC_CR_OSEL_Pos) /*!< 0x00400000 */ +#define RTC_CR_POL_Pos (20U) +#define RTC_CR_POL_Msk (0x1UL << RTC_CR_POL_Pos) /*!< 0x00100000 */ +#define RTC_CR_POL RTC_CR_POL_Msk +#define RTC_CR_COSEL_Pos (19U) +#define RTC_CR_COSEL_Msk (0x1UL << RTC_CR_COSEL_Pos) /*!< 0x00080000 */ +#define RTC_CR_COSEL RTC_CR_COSEL_Msk +#define RTC_CR_BKP_Pos (18U) +#define RTC_CR_BKP_Msk (0x1UL << RTC_CR_BKP_Pos) /*!< 0x00040000 */ +#define RTC_CR_BKP RTC_CR_BKP_Msk +#define RTC_CR_SUB1H_Pos (17U) +#define RTC_CR_SUB1H_Msk (0x1UL << RTC_CR_SUB1H_Pos) /*!< 0x00020000 */ +#define RTC_CR_SUB1H RTC_CR_SUB1H_Msk +#define RTC_CR_ADD1H_Pos (16U) +#define RTC_CR_ADD1H_Msk (0x1UL << RTC_CR_ADD1H_Pos) /*!< 0x00010000 */ +#define RTC_CR_ADD1H RTC_CR_ADD1H_Msk +#define RTC_CR_TSIE_Pos (15U) +#define RTC_CR_TSIE_Msk (0x1UL << RTC_CR_TSIE_Pos) /*!< 0x00008000 */ +#define RTC_CR_TSIE RTC_CR_TSIE_Msk /*!< Timestamp interrupt enable > */ +#define RTC_CR_WUTIE_Pos (14U) +#define RTC_CR_WUTIE_Msk (0x1UL << RTC_CR_WUTIE_Pos) /*!< 0x00004000 */ +#define RTC_CR_WUTIE RTC_CR_WUTIE_Msk /*!< Wakeup timer interrupt enable > */ +#define RTC_CR_ALRBIE_Pos (13U) +#define RTC_CR_ALRBIE_Msk (0x1UL << RTC_CR_ALRBIE_Pos) /*!< 0x00002000 */ +#define RTC_CR_ALRBIE RTC_CR_ALRBIE_Msk +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk /*!< timestamp enable > */ +#define RTC_CR_WUTE_Pos (10U) +#define RTC_CR_WUTE_Msk (0x1UL << RTC_CR_WUTE_Pos) /*!< 0x00000400 */ +#define RTC_CR_WUTE RTC_CR_WUTE_Msk /*!< Wakeup timer enable > */ +#define RTC_CR_ALRBE_Pos (9U) +#define RTC_CR_ALRBE_Msk (0x1UL << RTC_CR_ALRBE_Pos) /*!< 0x00000200 */ +#define RTC_CR_ALRBE RTC_CR_ALRBE_Msk +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk /*!< Timestamp event active edge > */ +#define RTC_CR_WUCKSEL_Pos (0U) +#define RTC_CR_WUCKSEL_Msk (0x7UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000007 */ +#define RTC_CR_WUCKSEL RTC_CR_WUCKSEL_Msk /*!< Wakeup clock selection > */ +#define RTC_CR_WUCKSEL_0 (0x1UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000001 */ +#define RTC_CR_WUCKSEL_1 (0x2UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000002 */ +#define RTC_CR_WUCKSEL_2 (0x4UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000004 */ + +/******************** Bits definition for RTC_WPR register ******************/ +#define RTC_WPR_KEY_Pos (0U) +#define RTC_WPR_KEY_Msk (0xFFUL << RTC_WPR_KEY_Pos) /*!< 0x000000FF */ +#define RTC_WPR_KEY RTC_WPR_KEY_Msk + +/******************** Bits definition for RTC_CALR register *****************/ +#define RTC_CALR_CALP_Pos (15U) +#define RTC_CALR_CALP_Msk (0x1UL << RTC_CALR_CALP_Pos) /*!< 0x00008000 */ +#define RTC_CALR_CALP RTC_CALR_CALP_Msk +#define RTC_CALR_CALW8_Pos (14U) +#define RTC_CALR_CALW8_Msk (0x1UL << RTC_CALR_CALW8_Pos) /*!< 0x00004000 */ +#define RTC_CALR_CALW8 RTC_CALR_CALW8_Msk +#define RTC_CALR_CALW16_Pos (13U) +#define RTC_CALR_CALW16_Msk (0x1UL << RTC_CALR_CALW16_Pos) /*!< 0x00002000 */ +#define RTC_CALR_CALW16 RTC_CALR_CALW16_Msk +#define RTC_CALR_CALM_Pos (0U) +#define RTC_CALR_CALM_Msk (0x1FFUL << RTC_CALR_CALM_Pos) /*!< 0x000001FF */ +#define RTC_CALR_CALM RTC_CALR_CALM_Msk +#define RTC_CALR_CALM_0 (0x001UL << RTC_CALR_CALM_Pos) /*!< 0x00000001 */ +#define RTC_CALR_CALM_1 (0x002UL << RTC_CALR_CALM_Pos) /*!< 0x00000002 */ +#define RTC_CALR_CALM_2 (0x004UL << RTC_CALR_CALM_Pos) /*!< 0x00000004 */ +#define RTC_CALR_CALM_3 (0x008UL << RTC_CALR_CALM_Pos) /*!< 0x00000008 */ +#define RTC_CALR_CALM_4 (0x010UL << RTC_CALR_CALM_Pos) /*!< 0x00000010 */ +#define RTC_CALR_CALM_5 (0x020UL << RTC_CALR_CALM_Pos) /*!< 0x00000020 */ +#define RTC_CALR_CALM_6 (0x040UL << RTC_CALR_CALM_Pos) /*!< 0x00000040 */ +#define RTC_CALR_CALM_7 (0x080UL << RTC_CALR_CALM_Pos) /*!< 0x00000080 */ +#define RTC_CALR_CALM_8 (0x100UL << RTC_CALR_CALM_Pos) /*!< 0x00000100 */ + +/******************** Bits definition for RTC_SHIFTR register ***************/ +#define RTC_SHIFTR_SUBFS_Pos (0U) +#define RTC_SHIFTR_SUBFS_Msk (0x7FFFUL << RTC_SHIFTR_SUBFS_Pos) /*!< 0x00007FFF */ +#define RTC_SHIFTR_SUBFS RTC_SHIFTR_SUBFS_Msk +#define RTC_SHIFTR_ADD1S_Pos (31U) +#define RTC_SHIFTR_ADD1S_Msk (0x1UL << RTC_SHIFTR_ADD1S_Pos) /*!< 0x80000000 */ +#define RTC_SHIFTR_ADD1S RTC_SHIFTR_ADD1S_Msk + +/******************** Bits definition for RTC_TSTR register *****************/ +#define RTC_TSTR_PM_Pos (22U) +#define RTC_TSTR_PM_Msk (0x1UL << RTC_TSTR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TSTR_PM RTC_TSTR_PM_Msk /*!< AM-PM notation > */ +#define RTC_TSTR_HT_Pos (20U) +#define RTC_TSTR_HT_Msk (0x3UL << RTC_TSTR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TSTR_HT RTC_TSTR_HT_Msk +#define RTC_TSTR_HT_0 (0x1UL << RTC_TSTR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TSTR_HT_1 (0x2UL << RTC_TSTR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TSTR_HU_Pos (16U) +#define RTC_TSTR_HU_Msk (0xFUL << RTC_TSTR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TSTR_HU RTC_TSTR_HU_Msk +#define RTC_TSTR_HU_0 (0x1UL << RTC_TSTR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TSTR_HU_1 (0x2UL << RTC_TSTR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TSTR_HU_2 (0x4UL << RTC_TSTR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TSTR_HU_3 (0x8UL << RTC_TSTR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TSTR_MNT_Pos (12U) +#define RTC_TSTR_MNT_Msk (0x7UL << RTC_TSTR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TSTR_MNT RTC_TSTR_MNT_Msk +#define RTC_TSTR_MNT_0 (0x1UL << RTC_TSTR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TSTR_MNT_1 (0x2UL << RTC_TSTR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TSTR_MNT_2 (0x4UL << RTC_TSTR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TSTR_MNU_Pos (8U) +#define RTC_TSTR_MNU_Msk (0xFUL << RTC_TSTR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TSTR_MNU RTC_TSTR_MNU_Msk +#define RTC_TSTR_MNU_0 (0x1UL << RTC_TSTR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TSTR_MNU_1 (0x2UL << RTC_TSTR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TSTR_MNU_2 (0x4UL << RTC_TSTR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TSTR_MNU_3 (0x8UL << RTC_TSTR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TSTR_ST_Pos (4U) +#define RTC_TSTR_ST_Msk (0x7UL << RTC_TSTR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TSTR_ST RTC_TSTR_ST_Msk +#define RTC_TSTR_ST_0 (0x1UL << RTC_TSTR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TSTR_ST_1 (0x2UL << RTC_TSTR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TSTR_ST_2 (0x4UL << RTC_TSTR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TSTR_SU_Pos (0U) +#define RTC_TSTR_SU_Msk (0xFUL << RTC_TSTR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TSTR_SU RTC_TSTR_SU_Msk +#define RTC_TSTR_SU_0 (0x1UL << RTC_TSTR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TSTR_SU_1 (0x2UL << RTC_TSTR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TSTR_SU_2 (0x4UL << RTC_TSTR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TSTR_SU_3 (0x8UL << RTC_TSTR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSDR register *****************/ +#define RTC_TSDR_WDU_Pos (13U) +#define RTC_TSDR_WDU_Msk (0x7UL << RTC_TSDR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_TSDR_WDU RTC_TSDR_WDU_Msk /*!< Week day units > */ +#define RTC_TSDR_WDU_0 (0x1UL << RTC_TSDR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_TSDR_WDU_1 (0x2UL << RTC_TSDR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_TSDR_WDU_2 (0x4UL << RTC_TSDR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_TSDR_MT_Pos (12U) +#define RTC_TSDR_MT_Msk (0x1UL << RTC_TSDR_MT_Pos) /*!< 0x00001000 */ +#define RTC_TSDR_MT RTC_TSDR_MT_Msk +#define RTC_TSDR_MU_Pos (8U) +#define RTC_TSDR_MU_Msk (0xFUL << RTC_TSDR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_TSDR_MU RTC_TSDR_MU_Msk +#define RTC_TSDR_MU_0 (0x1UL << RTC_TSDR_MU_Pos) /*!< 0x00000100 */ +#define RTC_TSDR_MU_1 (0x2UL << RTC_TSDR_MU_Pos) /*!< 0x00000200 */ +#define RTC_TSDR_MU_2 (0x4UL << RTC_TSDR_MU_Pos) /*!< 0x00000400 */ +#define RTC_TSDR_MU_3 (0x8UL << RTC_TSDR_MU_Pos) /*!< 0x00000800 */ +#define RTC_TSDR_DT_Pos (4U) +#define RTC_TSDR_DT_Msk (0x3UL << RTC_TSDR_DT_Pos) /*!< 0x00000030 */ +#define RTC_TSDR_DT RTC_TSDR_DT_Msk +#define RTC_TSDR_DT_0 (0x1UL << RTC_TSDR_DT_Pos) /*!< 0x00000010 */ +#define RTC_TSDR_DT_1 (0x2UL << RTC_TSDR_DT_Pos) /*!< 0x00000020 */ +#define RTC_TSDR_DU_Pos (0U) +#define RTC_TSDR_DU_Msk (0xFUL << RTC_TSDR_DU_Pos) /*!< 0x0000000F */ +#define RTC_TSDR_DU RTC_TSDR_DU_Msk +#define RTC_TSDR_DU_0 (0x1UL << RTC_TSDR_DU_Pos) /*!< 0x00000001 */ +#define RTC_TSDR_DU_1 (0x2UL << RTC_TSDR_DU_Pos) /*!< 0x00000002 */ +#define RTC_TSDR_DU_2 (0x4UL << RTC_TSDR_DU_Pos) /*!< 0x00000004 */ +#define RTC_TSDR_DU_3 (0x8UL << RTC_TSDR_DU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSSSR register ****************/ +#define RTC_TSSSR_SS_Pos (0U) +#define RTC_TSSSR_SS_Msk (0xFFFFUL << RTC_TSSSR_SS_Pos) /*!< 0x0000FFFF */ +#define RTC_TSSSR_SS RTC_TSSSR_SS_Msk /*!< Sub second value > */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk +#define RTC_ALRMAR_DT_0 (0x1UL << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2UL << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk +#define RTC_ALRMAR_DU_0 (0x1UL << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2UL << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4UL << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8UL << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk +#define RTC_ALRMAR_HT_0 (0x1UL << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2UL << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk +#define RTC_ALRMAR_HU_0 (0x1UL << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2UL << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4UL << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8UL << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk +#define RTC_ALRMAR_MNT_0 (0x1UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk +#define RTC_ALRMAR_MNU_0 (0x1UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk +#define RTC_ALRMAR_ST_0 (0x1UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk +#define RTC_ALRMAR_SU_0 (0x1UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0xFUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk +#define RTC_ALRMASSR_MASKSS_0 (0x1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_SS_Pos (0U) +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk + +/******************** Bits definition for RTC_ALRMBR register ***************/ +#define RTC_ALRMBR_MSK4_Pos (31U) +#define RTC_ALRMBR_MSK4_Msk (0x1UL << RTC_ALRMBR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBR_MSK4 RTC_ALRMBR_MSK4_Msk +#define RTC_ALRMBR_WDSEL_Pos (30U) +#define RTC_ALRMBR_WDSEL_Msk (0x1UL << RTC_ALRMBR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMBR_WDSEL RTC_ALRMBR_WDSEL_Msk +#define RTC_ALRMBR_DT_Pos (28U) +#define RTC_ALRMBR_DT_Msk (0x3UL << RTC_ALRMBR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMBR_DT RTC_ALRMBR_DT_Msk +#define RTC_ALRMBR_DT_0 (0x1UL << RTC_ALRMBR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBR_DT_1 (0x2UL << RTC_ALRMBR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBR_DU_Pos (24U) +#define RTC_ALRMBR_DU_Msk (0xFUL << RTC_ALRMBR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBR_DU RTC_ALRMBR_DU_Msk +#define RTC_ALRMBR_DU_0 (0x1UL << RTC_ALRMBR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBR_DU_1 (0x2UL << RTC_ALRMBR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBR_DU_2 (0x4UL << RTC_ALRMBR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBR_DU_3 (0x8UL << RTC_ALRMBR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBR_MSK3_Pos (23U) +#define RTC_ALRMBR_MSK3_Msk (0x1UL << RTC_ALRMBR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMBR_MSK3 RTC_ALRMBR_MSK3_Msk +#define RTC_ALRMBR_PM_Pos (22U) +#define RTC_ALRMBR_PM_Msk (0x1UL << RTC_ALRMBR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMBR_PM RTC_ALRMBR_PM_Msk +#define RTC_ALRMBR_HT_Pos (20U) +#define RTC_ALRMBR_HT_Msk (0x3UL << RTC_ALRMBR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMBR_HT RTC_ALRMBR_HT_Msk +#define RTC_ALRMBR_HT_0 (0x1UL << RTC_ALRMBR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMBR_HT_1 (0x2UL << RTC_ALRMBR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMBR_HU_Pos (16U) +#define RTC_ALRMBR_HU_Msk (0xFUL << RTC_ALRMBR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMBR_HU RTC_ALRMBR_HU_Msk +#define RTC_ALRMBR_HU_0 (0x1UL << RTC_ALRMBR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMBR_HU_1 (0x2UL << RTC_ALRMBR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMBR_HU_2 (0x4UL << RTC_ALRMBR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMBR_HU_3 (0x8UL << RTC_ALRMBR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMBR_MSK2_Pos (15U) +#define RTC_ALRMBR_MSK2_Msk (0x1UL << RTC_ALRMBR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMBR_MSK2 RTC_ALRMBR_MSK2_Msk +#define RTC_ALRMBR_MNT_Pos (12U) +#define RTC_ALRMBR_MNT_Msk (0x7UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMBR_MNT RTC_ALRMBR_MNT_Msk +#define RTC_ALRMBR_MNT_0 (0x1UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMBR_MNT_1 (0x2UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMBR_MNT_2 (0x4UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMBR_MNU_Pos (8U) +#define RTC_ALRMBR_MNU_Msk (0xFUL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMBR_MNU RTC_ALRMBR_MNU_Msk +#define RTC_ALRMBR_MNU_0 (0x1UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMBR_MNU_1 (0x2UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMBR_MNU_2 (0x4UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMBR_MNU_3 (0x8UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMBR_MSK1_Pos (7U) +#define RTC_ALRMBR_MSK1_Msk (0x1UL << RTC_ALRMBR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMBR_MSK1 RTC_ALRMBR_MSK1_Msk +#define RTC_ALRMBR_ST_Pos (4U) +#define RTC_ALRMBR_ST_Msk (0x7UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMBR_ST RTC_ALRMBR_ST_Msk +#define RTC_ALRMBR_ST_0 (0x1UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMBR_ST_1 (0x2UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMBR_ST_2 (0x4UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMBR_SU_Pos (0U) +#define RTC_ALRMBR_SU_Msk (0xFUL << RTC_ALRMBR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMBR_SU RTC_ALRMBR_SU_Msk +#define RTC_ALRMBR_SU_0 (0x1UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMBR_SU_1 (0x2UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMBR_SU_2 (0x4UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMBR_SU_3 (0x8UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMBSSR_MASKSS_Pos (24U) +#define RTC_ALRMBSSR_MASKSS_Msk (0xFUL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBSSR_MASKSS RTC_ALRMBSSR_MASKSS_Msk +#define RTC_ALRMBSSR_MASKSS_0 (0x1UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBSSR_MASKSS_1 (0x2UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBSSR_MASKSS_2 (0x4UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBSSR_MASKSS_3 (0x8UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBSSR_SS_Pos (0U) +#define RTC_ALRMBSSR_SS_Msk (0x7FFFUL << RTC_ALRMBSSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMBSSR_SS RTC_ALRMBSSR_SS_Msk + +/******************** Bits definition for RTC_SR register *******************/ +#define RTC_SR_ITSF_Pos (5U) +#define RTC_SR_ITSF_Msk (0x1UL << RTC_SR_ITSF_Pos) /*!< 0x00000020 */ +#define RTC_SR_ITSF RTC_SR_ITSF_Msk +#define RTC_SR_TSOVF_Pos (4U) +#define RTC_SR_TSOVF_Msk (0x1UL << RTC_SR_TSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SR_TSOVF RTC_SR_TSOVF_Msk /*!< Timestamp overflow flag > */ +#define RTC_SR_TSF_Pos (3U) +#define RTC_SR_TSF_Msk (0x1UL << RTC_SR_TSF_Pos) /*!< 0x00000008 */ +#define RTC_SR_TSF RTC_SR_TSF_Msk /*!< Timestamp flag > */ +#define RTC_SR_WUTF_Pos (2U) +#define RTC_SR_WUTF_Msk (0x1UL << RTC_SR_WUTF_Pos) /*!< 0x00000004 */ +#define RTC_SR_WUTF RTC_SR_WUTF_Msk /*!< Wakeup timer flag > */ +#define RTC_SR_ALRBF_Pos (1U) +#define RTC_SR_ALRBF_Msk (0x1UL << RTC_SR_ALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SR_ALRBF RTC_SR_ALRBF_Msk +#define RTC_SR_ALRAF_Pos (0U) +#define RTC_SR_ALRAF_Msk (0x1UL << RTC_SR_ALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SR_ALRAF RTC_SR_ALRAF_Msk + +/******************** Bits definition for RTC_MISR register *****************/ +#define RTC_MISR_ITSMF_Pos (5U) +#define RTC_MISR_ITSMF_Msk (0x1UL << RTC_MISR_ITSMF_Pos) /*!< 0x00000020 */ +#define RTC_MISR_ITSMF RTC_MISR_ITSMF_Msk +#define RTC_MISR_TSOVMF_Pos (4U) +#define RTC_MISR_TSOVMF_Msk (0x1UL << RTC_MISR_TSOVMF_Pos) /*!< 0x00000010 */ +#define RTC_MISR_TSOVMF RTC_MISR_TSOVMF_Msk /*!< Timestamp overflow masked flag > */ +#define RTC_MISR_TSMF_Pos (3U) +#define RTC_MISR_TSMF_Msk (0x1UL << RTC_MISR_TSMF_Pos) /*!< 0x00000008 */ +#define RTC_MISR_TSMF RTC_MISR_TSMF_Msk /*!< Timestamp masked flag > */ +#define RTC_MISR_WUTMF_Pos (2U) +#define RTC_MISR_WUTMF_Msk (0x1UL << RTC_MISR_WUTMF_Pos) /*!< 0x00000004 */ +#define RTC_MISR_WUTMF RTC_MISR_WUTMF_Msk /*!< Wakeup timer masked flag > */ +#define RTC_MISR_ALRBMF_Pos (1U) +#define RTC_MISR_ALRBMF_Msk (0x1UL << RTC_MISR_ALRBMF_Pos) /*!< 0x00000002 */ +#define RTC_MISR_ALRBMF RTC_MISR_ALRBMF_Msk +#define RTC_MISR_ALRAMF_Pos (0U) +#define RTC_MISR_ALRAMF_Msk (0x1UL << RTC_MISR_ALRAMF_Pos) /*!< 0x00000001 */ +#define RTC_MISR_ALRAMF RTC_MISR_ALRAMF_Msk + +/******************** Bits definition for RTC_SCR register ******************/ +#define RTC_SCR_CITSF_Pos (5U) +#define RTC_SCR_CITSF_Msk (0x1UL << RTC_SCR_CITSF_Pos) /*!< 0x00000020 */ +#define RTC_SCR_CITSF RTC_SCR_CITSF_Msk +#define RTC_SCR_CTSOVF_Pos (4U) +#define RTC_SCR_CTSOVF_Msk (0x1UL << RTC_SCR_CTSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SCR_CTSOVF RTC_SCR_CTSOVF_Msk /*!< Clear timestamp overflow flag > */ +#define RTC_SCR_CTSF_Pos (3U) +#define RTC_SCR_CTSF_Msk (0x1UL << RTC_SCR_CTSF_Pos) /*!< 0x00000008 */ +#define RTC_SCR_CTSF RTC_SCR_CTSF_Msk /*!< Clear timestamp flag > */ +#define RTC_SCR_CWUTF_Pos (2U) +#define RTC_SCR_CWUTF_Msk (0x1UL << RTC_SCR_CWUTF_Pos) /*!< 0x00000004 */ +#define RTC_SCR_CWUTF RTC_SCR_CWUTF_Msk /*!< Clear wakeup timer flag > */ +#define RTC_SCR_CALRBF_Pos (1U) +#define RTC_SCR_CALRBF_Msk (0x1UL << RTC_SCR_CALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SCR_CALRBF RTC_SCR_CALRBF_Msk +#define RTC_SCR_CALRAF_Pos (0U) +#define RTC_SCR_CALRAF_Msk (0x1UL << RTC_SCR_CALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SCR_CALRAF RTC_SCR_CALRAF_Msk + +/******************************************************************************/ +/* */ +/* Tamper and backup register (TAMP) */ +/* */ +/******************************************************************************/ +/******************** Bits definition for TAMP_CR1 register *****************/ +#define TAMP_CR1_TAMP1E_Pos (0U) +#define TAMP_CR1_TAMP1E_Msk (0x1UL << TAMP_CR1_TAMP1E_Pos) /*!< 0x00000001 */ +#define TAMP_CR1_TAMP1E TAMP_CR1_TAMP1E_Msk +#define TAMP_CR1_TAMP2E_Pos (1U) +#define TAMP_CR1_TAMP2E_Msk (0x1UL << TAMP_CR1_TAMP2E_Pos) /*!< 0x00000002 */ +#define TAMP_CR1_TAMP2E TAMP_CR1_TAMP2E_Msk +#define TAMP_CR1_TAMP3E_Pos (2U) +#define TAMP_CR1_TAMP3E_Msk (0x1UL << TAMP_CR1_TAMP3E_Pos) /*!< 0x00000004 */ +#define TAMP_CR1_TAMP3E TAMP_CR1_TAMP3E_Msk +#define TAMP_CR1_ITAMP3E_Pos (18U) +#define TAMP_CR1_ITAMP3E_Msk (0x1UL << TAMP_CR1_ITAMP3E_Pos) /*!< 0x00040000 */ +#define TAMP_CR1_ITAMP3E TAMP_CR1_ITAMP3E_Msk +#define TAMP_CR1_ITAMP4E_Pos (19U) +#define TAMP_CR1_ITAMP4E_Msk (0x1UL << TAMP_CR1_ITAMP4E_Pos) /*!< 0x00080000 */ +#define TAMP_CR1_ITAMP4E TAMP_CR1_ITAMP4E_Msk +#define TAMP_CR1_ITAMP5E_Pos (20U) +#define TAMP_CR1_ITAMP5E_Msk (0x1UL << TAMP_CR1_ITAMP5E_Pos) /*!< 0x00100000 */ +#define TAMP_CR1_ITAMP5E TAMP_CR1_ITAMP5E_Msk +#define TAMP_CR1_ITAMP6E_Pos (21U) +#define TAMP_CR1_ITAMP6E_Msk (0x1UL << TAMP_CR1_ITAMP6E_Pos) /*!< 0x00200000 */ +#define TAMP_CR1_ITAMP6E TAMP_CR1_ITAMP6E_Msk + +/******************** Bits definition for TAMP_CR2 register *****************/ +#define TAMP_CR2_TAMP1NOERASE_Pos (0U) +#define TAMP_CR2_TAMP1NOERASE_Msk (0x1UL << TAMP_CR2_TAMP1NOERASE_Pos) /*!< 0x00000001 */ +#define TAMP_CR2_TAMP1NOERASE TAMP_CR2_TAMP1NOERASE_Msk +#define TAMP_CR2_TAMP2NOERASE_Pos (1U) +#define TAMP_CR2_TAMP2NOERASE_Msk (0x1UL << TAMP_CR2_TAMP2NOERASE_Pos) /*!< 0x00000002 */ +#define TAMP_CR2_TAMP2NOERASE TAMP_CR2_TAMP2NOERASE_Msk +#define TAMP_CR2_TAMP3NOERASE_Pos (2U) +#define TAMP_CR2_TAMP3NOERASE_Msk (0x1UL << TAMP_CR2_TAMP3NOERASE_Pos) /*!< 0x00000004 */ +#define TAMP_CR2_TAMP3NOERASE TAMP_CR2_TAMP3NOERASE_Msk +#define TAMP_CR2_TAMP1MSK_Pos (16U) +#define TAMP_CR2_TAMP1MSK_Msk (0x1UL << TAMP_CR2_TAMP1MSK_Pos) /*!< 0x00010000 */ +#define TAMP_CR2_TAMP1MSK TAMP_CR2_TAMP1MSK_Msk +#define TAMP_CR2_TAMP2MSK_Pos (17U) +#define TAMP_CR2_TAMP2MSK_Msk (0x1UL << TAMP_CR2_TAMP2MSK_Pos) /*!< 0x00020000 */ +#define TAMP_CR2_TAMP2MSK TAMP_CR2_TAMP2MSK_Msk +#define TAMP_CR2_TAMP3MSK_Pos (18U) +#define TAMP_CR2_TAMP3MSK_Msk (0x1UL << TAMP_CR2_TAMP3MSK_Pos) /*!< 0x00040000 */ +#define TAMP_CR2_TAMP3MSK TAMP_CR2_TAMP3MSK_Msk +#define TAMP_CR2_TAMP1TRG_Pos (24U) +#define TAMP_CR2_TAMP1TRG_Msk (0x1UL << TAMP_CR2_TAMP1TRG_Pos) /*!< 0x01000000 */ +#define TAMP_CR2_TAMP1TRG TAMP_CR2_TAMP1TRG_Msk +#define TAMP_CR2_TAMP2TRG_Pos (25U) +#define TAMP_CR2_TAMP2TRG_Msk (0x1UL << TAMP_CR2_TAMP2TRG_Pos) /*!< 0x02000000 */ +#define TAMP_CR2_TAMP2TRG TAMP_CR2_TAMP2TRG_Msk +#define TAMP_CR2_TAMP3TRG_Pos (26U) +#define TAMP_CR2_TAMP3TRG_Msk (0x1UL << TAMP_CR2_TAMP3TRG_Pos) /*!< 0x04000000 */ +#define TAMP_CR2_TAMP3TRG TAMP_CR2_TAMP3TRG_Msk + +/******************** Bits definition for TAMP_FLTCR register ***************/ +#define TAMP_FLTCR_TAMPFREQ_0 0x00000001U +#define TAMP_FLTCR_TAMPFREQ_1 0x00000002U +#define TAMP_FLTCR_TAMPFREQ_2 0x00000004U +#define TAMP_FLTCR_TAMPFREQ_Pos (0U) +#define TAMP_FLTCR_TAMPFREQ_Msk (0x7UL << TAMP_FLTCR_TAMPFREQ_Pos) /*!< 0x00000007 */ +#define TAMP_FLTCR_TAMPFREQ TAMP_FLTCR_TAMPFREQ_Msk +#define TAMP_FLTCR_TAMPFLT_0 0x00000008U +#define TAMP_FLTCR_TAMPFLT_1 0x00000010U +#define TAMP_FLTCR_TAMPFLT_Pos (3U) +#define TAMP_FLTCR_TAMPFLT_Msk (0x3UL << TAMP_FLTCR_TAMPFLT_Pos) /*!< 0x00000018 */ +#define TAMP_FLTCR_TAMPFLT TAMP_FLTCR_TAMPFLT_Msk +#define TAMP_FLTCR_TAMPPRCH_0 0x00000020U +#define TAMP_FLTCR_TAMPPRCH_1 0x00000040U +#define TAMP_FLTCR_TAMPPRCH_Pos (5U) +#define TAMP_FLTCR_TAMPPRCH_Msk (0x3UL << TAMP_FLTCR_TAMPPRCH_Pos) /*!< 0x00000060 */ +#define TAMP_FLTCR_TAMPPRCH TAMP_FLTCR_TAMPPRCH_Msk +#define TAMP_FLTCR_TAMPPUDIS_Pos (7U) +#define TAMP_FLTCR_TAMPPUDIS_Msk (0x1UL << TAMP_FLTCR_TAMPPUDIS_Pos) /*!< 0x00000080 */ +#define TAMP_FLTCR_TAMPPUDIS TAMP_FLTCR_TAMPPUDIS_Msk + +/******************** Bits definition for TAMP_IER register *****************/ +#define TAMP_IER_TAMP1IE_Pos (0U) +#define TAMP_IER_TAMP1IE_Msk (0x1UL << TAMP_IER_TAMP1IE_Pos) /*!< 0x00000001 */ +#define TAMP_IER_TAMP1IE TAMP_IER_TAMP1IE_Msk +#define TAMP_IER_TAMP2IE_Pos (1U) +#define TAMP_IER_TAMP2IE_Msk (0x1UL << TAMP_IER_TAMP2IE_Pos) /*!< 0x00000002 */ +#define TAMP_IER_TAMP2IE TAMP_IER_TAMP2IE_Msk +#define TAMP_IER_TAMP3IE_Pos (2U) +#define TAMP_IER_TAMP3IE_Msk (0x1UL << TAMP_IER_TAMP3IE_Pos) /*!< 0x00000004 */ +#define TAMP_IER_TAMP3IE TAMP_IER_TAMP3IE_Msk +#define TAMP_IER_ITAMP3IE_Pos (18U) +#define TAMP_IER_ITAMP3IE_Msk (0x1UL << TAMP_IER_ITAMP3IE_Pos) /*!< 0x00040000 */ +#define TAMP_IER_ITAMP3IE TAMP_IER_ITAMP3IE_Msk +#define TAMP_IER_ITAMP4IE_Pos (19U) +#define TAMP_IER_ITAMP4IE_Msk (0x1UL << TAMP_IER_ITAMP4IE_Pos) /*!< 0x00080000 */ +#define TAMP_IER_ITAMP4IE TAMP_IER_ITAMP4IE_Msk +#define TAMP_IER_ITAMP5IE_Pos (20U) +#define TAMP_IER_ITAMP5IE_Msk (0x1UL << TAMP_IER_ITAMP5IE_Pos) /*!< 0x00100000 */ +#define TAMP_IER_ITAMP5IE TAMP_IER_ITAMP5IE_Msk +#define TAMP_IER_ITAMP6IE_Pos (21U) +#define TAMP_IER_ITAMP6IE_Msk (0x1UL << TAMP_IER_ITAMP6IE_Pos) /*!< 0x00200000 */ +#define TAMP_IER_ITAMP6IE TAMP_IER_ITAMP6IE_Msk + +/******************** Bits definition for TAMP_SR register ******************/ +#define TAMP_SR_TAMP1F_Pos (0U) +#define TAMP_SR_TAMP1F_Msk (0x1UL << TAMP_SR_TAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SR_TAMP1F TAMP_SR_TAMP1F_Msk +#define TAMP_SR_TAMP2F_Pos (1U) +#define TAMP_SR_TAMP2F_Msk (0x1UL << TAMP_SR_TAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SR_TAMP2F TAMP_SR_TAMP2F_Msk +#define TAMP_SR_TAMP3F_Pos (2U) +#define TAMP_SR_TAMP3F_Msk (0x1UL << TAMP_SR_TAMP3F_Pos) /*!< 0x00000004 */ +#define TAMP_SR_TAMP3F TAMP_SR_TAMP3F_Msk +#define TAMP_SR_ITAMP3F_Pos (18U) +#define TAMP_SR_ITAMP3F_Msk (0x1UL << TAMP_SR_ITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SR_ITAMP3F TAMP_SR_ITAMP3F_Msk +#define TAMP_SR_ITAMP4F_Pos (19U) +#define TAMP_SR_ITAMP4F_Msk (0x1UL << TAMP_SR_ITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SR_ITAMP4F TAMP_SR_ITAMP4F_Msk +#define TAMP_SR_ITAMP5F_Pos (20U) +#define TAMP_SR_ITAMP5F_Msk (0x1UL << TAMP_SR_ITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SR_ITAMP5F TAMP_SR_ITAMP5F_Msk +#define TAMP_SR_ITAMP6F_Pos (21U) +#define TAMP_SR_ITAMP6F_Msk (0x1UL << TAMP_SR_ITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SR_ITAMP6F TAMP_SR_ITAMP6F_Msk + +/******************** Bits definition for TAMP_MISR register ****************/ +#define TAMP_MISR_TAMP1MF_Pos (0U) +#define TAMP_MISR_TAMP1MF_Msk (0x1UL << TAMP_MISR_TAMP1MF_Pos) /*!< 0x00000001 */ +#define TAMP_MISR_TAMP1MF TAMP_MISR_TAMP1MF_Msk +#define TAMP_MISR_TAMP2MF_Pos (1U) +#define TAMP_MISR_TAMP2MF_Msk (0x1UL << TAMP_MISR_TAMP2MF_Pos) /*!< 0x00000002 */ +#define TAMP_MISR_TAMP2MF TAMP_MISR_TAMP2MF_Msk +#define TAMP_MISR_TAMP3MF_Pos (2U) +#define TAMP_MISR_TAMP3MF_Msk (0x1UL << TAMP_MISR_TAMP3MF_Pos) /*!< 0x00000004 */ +#define TAMP_MISR_TAMP3MF TAMP_MISR_TAMP3MF_Msk +#define TAMP_MISR_ITAMP3MF_Pos (18U) +#define TAMP_MISR_ITAMP3MF_Msk (0x1UL << TAMP_MISR_ITAMP3MF_Pos) /*!< 0x00040000 */ +#define TAMP_MISR_ITAMP3MF TAMP_MISR_ITAMP3MF_Msk +#define TAMP_MISR_ITAMP4MF_Pos (19U) +#define TAMP_MISR_ITAMP4MF_Msk (0x1UL << TAMP_MISR_ITAMP4MF_Pos) /*!< 0x00080000 */ +#define TAMP_MISR_ITAMP4MF TAMP_MISR_ITAMP4MF_Msk +#define TAMP_MISR_ITAMP5MF_Pos (20U) +#define TAMP_MISR_ITAMP5MF_Msk (0x1UL << TAMP_MISR_ITAMP5MF_Pos) /*!< 0x00100000 */ +#define TAMP_MISR_ITAMP5MF TAMP_MISR_ITAMP5MF_Msk +#define TAMP_MISR_ITAMP6MF_Pos (21U) +#define TAMP_MISR_ITAMP6MF_Msk (0x1UL << TAMP_MISR_ITAMP6MF_Pos) /*!< 0x00200000 */ +#define TAMP_MISR_ITAMP6MF TAMP_MISR_ITAMP6MF_Msk + +/******************** Bits definition for TAMP_SCR register *****************/ +#define TAMP_SCR_CTAMP1F_Pos (0U) +#define TAMP_SCR_CTAMP1F_Msk (0x1UL << TAMP_SCR_CTAMP1F_Pos) /*!< 0x00000001 */ +#define TAMP_SCR_CTAMP1F TAMP_SCR_CTAMP1F_Msk +#define TAMP_SCR_CTAMP2F_Pos (1U) +#define TAMP_SCR_CTAMP2F_Msk (0x1UL << TAMP_SCR_CTAMP2F_Pos) /*!< 0x00000002 */ +#define TAMP_SCR_CTAMP2F TAMP_SCR_CTAMP2F_Msk +#define TAMP_SCR_CTAMP3F_Pos (2U) +#define TAMP_SCR_CTAMP3F_Msk (0x1UL << TAMP_SCR_CTAMP3F_Pos) /*!< 0x00000004 */ +#define TAMP_SCR_CTAMP3F TAMP_SCR_CTAMP3F_Msk +#define TAMP_SCR_CITAMP3F_Pos (18U) +#define TAMP_SCR_CITAMP3F_Msk (0x1UL << TAMP_SCR_CITAMP3F_Pos) /*!< 0x00040000 */ +#define TAMP_SCR_CITAMP3F TAMP_SCR_CITAMP3F_Msk +#define TAMP_SCR_CITAMP4F_Pos (19U) +#define TAMP_SCR_CITAMP4F_Msk (0x1UL << TAMP_SCR_CITAMP4F_Pos) /*!< 0x00080000 */ +#define TAMP_SCR_CITAMP4F TAMP_SCR_CITAMP4F_Msk +#define TAMP_SCR_CITAMP5F_Pos (20U) +#define TAMP_SCR_CITAMP5F_Msk (0x1UL << TAMP_SCR_CITAMP5F_Pos) /*!< 0x00100000 */ +#define TAMP_SCR_CITAMP5F TAMP_SCR_CITAMP5F_Msk +#define TAMP_SCR_CITAMP6F_Pos (21U) +#define TAMP_SCR_CITAMP6F_Msk (0x1UL << TAMP_SCR_CITAMP6F_Pos) /*!< 0x00200000 */ +#define TAMP_SCR_CITAMP6F TAMP_SCR_CITAMP6F_Msk + +/******************** Bits definition for TAMP_BKP0R register ***************/ +#define TAMP_BKP0R_Pos (0U) +#define TAMP_BKP0R_Msk (0xFFFFFFFFUL << TAMP_BKP0R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP0R TAMP_BKP0R_Msk + +/******************** Bits definition for TAMP_BKP1R register ***************/ +#define TAMP_BKP1R_Pos (0U) +#define TAMP_BKP1R_Msk (0xFFFFFFFFUL << TAMP_BKP1R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP1R TAMP_BKP1R_Msk + +/******************** Bits definition for TAMP_BKP2R register ***************/ +#define TAMP_BKP2R_Pos (0U) +#define TAMP_BKP2R_Msk (0xFFFFFFFFUL << TAMP_BKP2R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP2R TAMP_BKP2R_Msk + +/******************** Bits definition for TAMP_BKP3R register ***************/ +#define TAMP_BKP3R_Pos (0U) +#define TAMP_BKP3R_Msk (0xFFFFFFFFUL << TAMP_BKP3R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP3R TAMP_BKP3R_Msk + +/******************** Bits definition for TAMP_BKP4R register ***************/ +#define TAMP_BKP4R_Pos (0U) +#define TAMP_BKP4R_Msk (0xFFFFFFFFUL << TAMP_BKP4R_Pos) /*!< 0xFFFFFFFF */ +#define TAMP_BKP4R TAMP_BKP4R_Msk + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface (SPI) */ +/* */ +/******************************************************************************/ +/* + * @brief Specific device feature definitions (not present on all devices in the STM32G0 series) + */ +#define SPI_I2S_SUPPORT /*!< I2S support */ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA_Pos (0U) +#define SPI_CR1_CPHA_Msk (0x1UL << SPI_CR1_CPHA_Pos) /*!< 0x00000001 */ +#define SPI_CR1_CPHA SPI_CR1_CPHA_Msk /*! exti[16] Interrupt */ +#define SYSCFG_ITLINE1_SR_PVMOUT_Pos (1U) +#define SYSCFG_ITLINE1_SR_PVMOUT_Msk (0x1UL << SYSCFG_ITLINE1_SR_PVMOUT_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE1_SR_PVMOUT SYSCFG_ITLINE1_SR_PVMOUT_Msk /*!< VDDUSB Power voltage monitor -> exti[34] Interrupt */ +#define SYSCFG_ITLINE2_SR_TAMPER_Pos (0U) +#define SYSCFG_ITLINE2_SR_TAMPER_Msk (0x1UL << SYSCFG_ITLINE2_SR_TAMPER_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE2_SR_TAMPER SYSCFG_ITLINE2_SR_TAMPER_Msk /*!< TAMPER -> exti[21] interrupt */ +#define SYSCFG_ITLINE2_SR_RTC_Pos (1U) +#define SYSCFG_ITLINE2_SR_RTC_Msk (0x1UL << SYSCFG_ITLINE2_SR_RTC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE2_SR_RTC SYSCFG_ITLINE2_SR_RTC_Msk /*!< RTC -> exti[19] interrupt .... */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Pos (0U) +#define SYSCFG_ITLINE3_SR_FLASH_ECC_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ECC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE3_SR_FLASH_ECC SYSCFG_ITLINE3_SR_FLASH_ECC_Msk /*!< Flash ITF ECC interrupt */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Pos (1U) +#define SYSCFG_ITLINE3_SR_FLASH_ITF_Msk (0x1UL << SYSCFG_ITLINE3_SR_FLASH_ITF_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF SYSCFG_ITLINE3_SR_FLASH_ITF_Msk /*!< FLASH ITF interrupt */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Pos (0U) +#define SYSCFG_ITLINE4_SR_CLK_CTRL_Msk (0x1UL << SYSCFG_ITLINE4_SR_CLK_CTRL_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL SYSCFG_ITLINE4_SR_CLK_CTRL_Msk /*!< RCC interrupt */ +#define SYSCFG_ITLINE4_SR_CRS_Pos (1U) +#define SYSCFG_ITLINE4_SR_CRS_Msk (0x1UL << SYSCFG_ITLINE4_SR_CRS_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE4_SR_CRS SYSCFG_ITLINE4_SR_CRS_Msk /*!< CRS interrupt */ +#define SYSCFG_ITLINE5_SR_EXTI0_Pos (0U) +#define SYSCFG_ITLINE5_SR_EXTI0_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI0_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE5_SR_EXTI0 SYSCFG_ITLINE5_SR_EXTI0_Msk /*!< External Interrupt 0 */ +#define SYSCFG_ITLINE5_SR_EXTI1_Pos (1U) +#define SYSCFG_ITLINE5_SR_EXTI1_Msk (0x1UL << SYSCFG_ITLINE5_SR_EXTI1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE5_SR_EXTI1 SYSCFG_ITLINE5_SR_EXTI1_Msk /*!< External Interrupt 1 */ +#define SYSCFG_ITLINE6_SR_EXTI2_Pos (0U) +#define SYSCFG_ITLINE6_SR_EXTI2_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE6_SR_EXTI2 SYSCFG_ITLINE6_SR_EXTI2_Msk /*!< External Interrupt 2 */ +#define SYSCFG_ITLINE6_SR_EXTI3_Pos (1U) +#define SYSCFG_ITLINE6_SR_EXTI3_Msk (0x1UL << SYSCFG_ITLINE6_SR_EXTI3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE6_SR_EXTI3 SYSCFG_ITLINE6_SR_EXTI3_Msk /*!< External Interrupt 3 */ +#define SYSCFG_ITLINE7_SR_EXTI4_Pos (0U) +#define SYSCFG_ITLINE7_SR_EXTI4_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI4_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE7_SR_EXTI4 SYSCFG_ITLINE7_SR_EXTI4_Msk /*!< External Interrupt 4 */ +#define SYSCFG_ITLINE7_SR_EXTI5_Pos (1U) +#define SYSCFG_ITLINE7_SR_EXTI5_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI5_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE7_SR_EXTI5 SYSCFG_ITLINE7_SR_EXTI5_Msk /*!< External Interrupt 5 */ +#define SYSCFG_ITLINE7_SR_EXTI6_Pos (2U) +#define SYSCFG_ITLINE7_SR_EXTI6_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI6_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE7_SR_EXTI6 SYSCFG_ITLINE7_SR_EXTI6_Msk /*!< External Interrupt 6 */ +#define SYSCFG_ITLINE7_SR_EXTI7_Pos (3U) +#define SYSCFG_ITLINE7_SR_EXTI7_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI7_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE7_SR_EXTI7 SYSCFG_ITLINE7_SR_EXTI7_Msk /*!< External Interrupt 7 */ +#define SYSCFG_ITLINE7_SR_EXTI8_Pos (4U) +#define SYSCFG_ITLINE7_SR_EXTI8_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI8_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE7_SR_EXTI8 SYSCFG_ITLINE7_SR_EXTI8_Msk /*!< External Interrupt 8 */ +#define SYSCFG_ITLINE7_SR_EXTI9_Pos (5U) +#define SYSCFG_ITLINE7_SR_EXTI9_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI9_Pos) /*!< 0x00000020 */ +#define SYSCFG_ITLINE7_SR_EXTI9 SYSCFG_ITLINE7_SR_EXTI9_Msk /*!< External Interrupt 9 */ +#define SYSCFG_ITLINE7_SR_EXTI10_Pos (6U) +#define SYSCFG_ITLINE7_SR_EXTI10_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI10_Pos) /*!< 0x00000040 */ +#define SYSCFG_ITLINE7_SR_EXTI10 SYSCFG_ITLINE7_SR_EXTI10_Msk /*!< External Interrupt 10 */ +#define SYSCFG_ITLINE7_SR_EXTI11_Pos (7U) +#define SYSCFG_ITLINE7_SR_EXTI11_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI11_Pos) /*!< 0x00000080 */ +#define SYSCFG_ITLINE7_SR_EXTI11 SYSCFG_ITLINE7_SR_EXTI11_Msk /*!< External Interrupt 11 */ +#define SYSCFG_ITLINE7_SR_EXTI12_Pos (8U) +#define SYSCFG_ITLINE7_SR_EXTI12_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI12_Pos) /*!< 0x00000100 */ +#define SYSCFG_ITLINE7_SR_EXTI12 SYSCFG_ITLINE7_SR_EXTI12_Msk /*!< External Interrupt 12 */ +#define SYSCFG_ITLINE7_SR_EXTI13_Pos (9U) +#define SYSCFG_ITLINE7_SR_EXTI13_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI13_Pos) /*!< 0x00000200 */ +#define SYSCFG_ITLINE7_SR_EXTI13 SYSCFG_ITLINE7_SR_EXTI13_Msk /*!< External Interrupt 13 */ +#define SYSCFG_ITLINE7_SR_EXTI14_Pos (10U) +#define SYSCFG_ITLINE7_SR_EXTI14_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI14_Pos) /*!< 0x00000400 */ +#define SYSCFG_ITLINE7_SR_EXTI14 SYSCFG_ITLINE7_SR_EXTI14_Msk /*!< External Interrupt 14 */ +#define SYSCFG_ITLINE7_SR_EXTI15_Pos (11U) +#define SYSCFG_ITLINE7_SR_EXTI15_Msk (0x1UL << SYSCFG_ITLINE7_SR_EXTI15_Pos) /*!< 0x00000800 */ +#define SYSCFG_ITLINE7_SR_EXTI15 SYSCFG_ITLINE7_SR_EXTI15_Msk /*!< External Interrupt 15 */ +#define SYSCFG_ITLINE8_SR_UCPD1_Pos (0U) +#define SYSCFG_ITLINE8_SR_UCPD1_Msk (0x1UL << SYSCFG_ITLINE8_SR_UCPD1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE8_SR_UCPD1 SYSCFG_ITLINE8_SR_UCPD1_Msk /*!< UCPD1 -> exti[32] Interrupt */ +#define SYSCFG_ITLINE8_SR_UCPD2_Pos (1U) +#define SYSCFG_ITLINE8_SR_UCPD2_Msk (0x1UL << SYSCFG_ITLINE8_SR_UCPD2_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE8_SR_UCPD2 SYSCFG_ITLINE8_SR_UCPD2_Msk /*!< UCPD2 -> exti[33] Interrupt */ +#define SYSCFG_ITLINE8_SR_USB_Pos (2U) +#define SYSCFG_ITLINE8_SR_USB_Msk (0x1UL << SYSCFG_ITLINE8_SR_USB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE8_SR_USB SYSCFG_ITLINE8_SR_USB_Msk /*!< USB Interrupt */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Pos (0U) +#define SYSCFG_ITLINE9_SR_DMA1_CH1_Msk (0x1UL << SYSCFG_ITLINE9_SR_DMA1_CH1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1 SYSCFG_ITLINE9_SR_DMA1_CH1_Msk /*!< DMA1 Channel 1 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Pos (0U) +#define SYSCFG_ITLINE10_SR_DMA1_CH2_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2 SYSCFG_ITLINE10_SR_DMA1_CH2_Msk /*!< DMA1 Channel 2 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Pos (1U) +#define SYSCFG_ITLINE10_SR_DMA1_CH3_Msk (0x1UL << SYSCFG_ITLINE10_SR_DMA1_CH3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3 SYSCFG_ITLINE10_SR_DMA1_CH3_Msk /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMAMUX1_Pos (0U) +#define SYSCFG_ITLINE11_SR_DMAMUX1_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMAMUX1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE11_SR_DMAMUX1 SYSCFG_ITLINE11_SR_DMAMUX1_Msk /*!< DMAMUX Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Pos (1U) +#define SYSCFG_ITLINE11_SR_DMA1_CH4_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH4_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4 SYSCFG_ITLINE11_SR_DMA1_CH4_Msk /*!< DMA1 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Pos (2U) +#define SYSCFG_ITLINE11_SR_DMA1_CH5_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH5_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5 SYSCFG_ITLINE11_SR_DMA1_CH5_Msk /*!< DMA1 Channel 5 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Pos (3U) +#define SYSCFG_ITLINE11_SR_DMA1_CH6_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH6_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6 SYSCFG_ITLINE11_SR_DMA1_CH6_Msk /*!< DMA1 Channel 6 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Pos (4U) +#define SYSCFG_ITLINE11_SR_DMA1_CH7_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA1_CH7_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7 SYSCFG_ITLINE11_SR_DMA1_CH7_Msk /*!< DMA1 Channel 7 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH1_Pos (5U) +#define SYSCFG_ITLINE11_SR_DMA2_CH1_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH1_Pos) /*!< 0x00000020 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH1 SYSCFG_ITLINE11_SR_DMA2_CH1_Msk /*!< DMA2 Channel 1 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH2_Pos (6U) +#define SYSCFG_ITLINE11_SR_DMA2_CH2_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH2_Pos) /*!< 0x00000040 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH2 SYSCFG_ITLINE11_SR_DMA2_CH2_Msk /*!< DMA2 Channel 2 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH3_Pos (7U) +#define SYSCFG_ITLINE11_SR_DMA2_CH3_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH3_Pos) /*!< 0x00000080 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH3 SYSCFG_ITLINE11_SR_DMA2_CH3_Msk /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH4_Pos (8U) +#define SYSCFG_ITLINE11_SR_DMA2_CH4_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH4_Pos) /*!< 0x00000100 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH4 SYSCFG_ITLINE11_SR_DMA2_CH4_Msk /*!< DMA2 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH5_Pos (9U) +#define SYSCFG_ITLINE11_SR_DMA2_CH5_Msk (0x1UL << SYSCFG_ITLINE11_SR_DMA2_CH5_Pos) /*!< 0x00000200 */ +#define SYSCFG_ITLINE11_SR_DMA2_CH5 SYSCFG_ITLINE11_SR_DMA2_CH5_Msk /*!< DMA2 Channel 5 Interrupt */ +#define SYSCFG_ITLINE12_SR_ADC_Pos (0U) +#define SYSCFG_ITLINE12_SR_ADC_Msk (0x1UL << SYSCFG_ITLINE12_SR_ADC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE12_SR_ADC SYSCFG_ITLINE12_SR_ADC_Msk /*!< ADC Interrupt */ +#define SYSCFG_ITLINE12_SR_COMP1_Pos (1U) +#define SYSCFG_ITLINE12_SR_COMP1_Msk (0x1UL << SYSCFG_ITLINE12_SR_COMP1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE12_SR_COMP1 SYSCFG_ITLINE12_SR_COMP1_Msk /*!< COMP1 Interrupt -> exti[17] */ +#define SYSCFG_ITLINE12_SR_COMP2_Pos (2U) +#define SYSCFG_ITLINE12_SR_COMP2_Msk (0x1UL << SYSCFG_ITLINE12_SR_COMP2_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE12_SR_COMP2 SYSCFG_ITLINE12_SR_COMP2_Msk /*!< COMP2 Interrupt -> exti[18] */ +#define SYSCFG_ITLINE12_SR_COMP3_Pos (3U) +#define SYSCFG_ITLINE12_SR_COMP3_Msk (0x1UL << SYSCFG_ITLINE12_SR_COMP3_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE12_SR_COMP3 SYSCFG_ITLINE12_SR_COMP3_Msk /*!< COMP3 Interrupt -> exti[20] */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Pos (0U) +#define SYSCFG_ITLINE13_SR_TIM1_CCU_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_CCU_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU SYSCFG_ITLINE13_SR_TIM1_CCU_Msk /*!< TIM1 CCU Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Pos (1U) +#define SYSCFG_ITLINE13_SR_TIM1_TRG_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_TRG_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG SYSCFG_ITLINE13_SR_TIM1_TRG_Msk /*!< TIM1 TRG Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Pos (2U) +#define SYSCFG_ITLINE13_SR_TIM1_UPD_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_UPD_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD SYSCFG_ITLINE13_SR_TIM1_UPD_Msk /*!< TIM1 UPD Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Pos (3U) +#define SYSCFG_ITLINE13_SR_TIM1_BRK_Msk (0x1UL << SYSCFG_ITLINE13_SR_TIM1_BRK_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK SYSCFG_ITLINE13_SR_TIM1_BRK_Msk /*!< TIM1 BRK Interrupt */ +#define SYSCFG_ITLINE14_SR_TIM1_CC_Pos (0U) +#define SYSCFG_ITLINE14_SR_TIM1_CC_Msk (0x1UL << SYSCFG_ITLINE14_SR_TIM1_CC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE14_SR_TIM1_CC SYSCFG_ITLINE14_SR_TIM1_CC_Msk /*!< TIM1 CC Interrupt */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB_Pos (0U) +#define SYSCFG_ITLINE15_SR_TIM2_GLB_Msk (0x1UL << SYSCFG_ITLINE15_SR_TIM2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB SYSCFG_ITLINE15_SR_TIM2_GLB_Msk /*!< TIM2 GLB Interrupt */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Pos (0U) +#define SYSCFG_ITLINE16_SR_TIM3_GLB_Msk (0x1UL << SYSCFG_ITLINE16_SR_TIM3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB SYSCFG_ITLINE16_SR_TIM3_GLB_Msk /*!< TIM3 GLB Interrupt */ +#define SYSCFG_ITLINE16_SR_TIM4_GLB_Pos (1U) +#define SYSCFG_ITLINE16_SR_TIM4_GLB_Msk (0x1UL << SYSCFG_ITLINE16_SR_TIM4_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE16_SR_TIM4_GLB SYSCFG_ITLINE16_SR_TIM4_GLB_Msk /*!< TIM4 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Pos (0U) +#define SYSCFG_ITLINE17_SR_TIM6_GLB_Msk (0x1UL << SYSCFG_ITLINE17_SR_TIM6_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB SYSCFG_ITLINE17_SR_TIM6_GLB_Msk /*!< TIM6 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_DAC_Pos (1U) +#define SYSCFG_ITLINE17_SR_DAC_Msk (0x1UL << SYSCFG_ITLINE17_SR_DAC_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE17_SR_DAC SYSCFG_ITLINE17_SR_DAC_Msk /*!< DAC Interrupt */ +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB_Pos (2U) +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB_Msk (0x1UL << SYSCFG_ITLINE17_SR_LPTIM1_GLB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE17_SR_LPTIM1_GLB SYSCFG_ITLINE17_SR_LPTIM1_GLB_Msk /*!< LPTIM1 -> exti[29] Interrupt */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Pos (0U) +#define SYSCFG_ITLINE18_SR_TIM7_GLB_Msk (0x1UL << SYSCFG_ITLINE18_SR_TIM7_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB SYSCFG_ITLINE18_SR_TIM7_GLB_Msk /*!< TIM7 GLB Interrupt */ +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB_Pos (1U) +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB_Msk (0x1UL << SYSCFG_ITLINE18_SR_LPTIM2_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE18_SR_LPTIM2_GLB SYSCFG_ITLINE18_SR_LPTIM2_GLB_Msk /*!< LPTIM2 -> exti[30] Interrupt */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Pos (0U) +#define SYSCFG_ITLINE19_SR_TIM14_GLB_Msk (0x1UL << SYSCFG_ITLINE19_SR_TIM14_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB SYSCFG_ITLINE19_SR_TIM14_GLB_Msk /*!< TIM14 GLB Interrupt */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Pos (0U) +#define SYSCFG_ITLINE20_SR_TIM15_GLB_Msk (0x1UL << SYSCFG_ITLINE20_SR_TIM15_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB SYSCFG_ITLINE20_SR_TIM15_GLB_Msk /*!< TIM15 GLB Interrupt */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Pos (0U) +#define SYSCFG_ITLINE21_SR_TIM16_GLB_Msk (0x1UL << SYSCFG_ITLINE21_SR_TIM16_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB SYSCFG_ITLINE21_SR_TIM16_GLB_Msk /*!< TIM16 GLB Interrupt */ +#define SYSCFG_ITLINE21_SR_FDCAN1_IT0_Pos (1U) +#define SYSCFG_ITLINE21_SR_FDCAN1_IT0_Msk (0x1UL << SYSCFG_ITLINE21_SR_FDCAN1_IT0_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE21_SR_FDCAN1_IT0 SYSCFG_ITLINE21_SR_FDCAN1_IT0_Msk /*!< FDCAN1 IT0 Interrupt */ +#define SYSCFG_ITLINE21_SR_FDCAN2_IT0_Pos (2U) +#define SYSCFG_ITLINE21_SR_FDCAN2_IT0_Msk (0x1UL << SYSCFG_ITLINE21_SR_FDCAN2_IT0_Pos) /*!< 0x00000003 */ +#define SYSCFG_ITLINE21_SR_FDCAN2_IT0 SYSCFG_ITLINE21_SR_FDCAN2_IT0_Msk /*!< FDCAN2 IT0 Interrupt */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Pos (0U) +#define SYSCFG_ITLINE22_SR_TIM17_GLB_Msk (0x1UL << SYSCFG_ITLINE22_SR_TIM17_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB SYSCFG_ITLINE22_SR_TIM17_GLB_Msk /*!< TIM17 GLB Interrupt */ +#define SYSCFG_ITLINE22_SR_FDCAN1_IT1_Pos (1U) +#define SYSCFG_ITLINE22_SR_FDCAN1_IT1_Msk (0x1UL << SYSCFG_ITLINE22_SR_FDCAN1_IT1_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE22_SR_FDCAN1_IT1 SYSCFG_ITLINE22_SR_FDCAN1_IT1_Msk /*!< FDCAN1 IT1 Interrupt */ +#define SYSCFG_ITLINE22_SR_FDCAN2_IT1_Pos (2U) +#define SYSCFG_ITLINE22_SR_FDCAN2_IT1_Msk (0x1UL << SYSCFG_ITLINE22_SR_FDCAN2_IT1_Pos) /*!< 0x00000003 */ +#define SYSCFG_ITLINE22_SR_FDCAN2_IT1 SYSCFG_ITLINE22_SR_FDCAN2_IT1_Msk /*!< FDCAN2 IT1 Interrupt */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Pos (0U) +#define SYSCFG_ITLINE23_SR_I2C1_GLB_Msk (0x1UL << SYSCFG_ITLINE23_SR_I2C1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB SYSCFG_ITLINE23_SR_I2C1_GLB_Msk /*!< I2C1 GLB Interrupt -> exti[23] */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Pos (0U) +#define SYSCFG_ITLINE24_SR_I2C2_GLB_Msk (0x1UL << SYSCFG_ITLINE24_SR_I2C2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB SYSCFG_ITLINE24_SR_I2C2_GLB_Msk /*!< I2C2 GLB Interrupt -> exti[22]*/ +#define SYSCFG_ITLINE24_SR_I2C3_GLB_Pos (1U) +#define SYSCFG_ITLINE24_SR_I2C3_GLB_Msk (0x1UL << SYSCFG_ITLINE24_SR_I2C3_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE24_SR_I2C3_GLB SYSCFG_ITLINE24_SR_I2C3_GLB_Msk /*!< I2C3 GLB Interrupt -> exti[24]*/ +#define SYSCFG_ITLINE25_SR_SPI1_Pos (0U) +#define SYSCFG_ITLINE25_SR_SPI1_Msk (0x1UL << SYSCFG_ITLINE25_SR_SPI1_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE25_SR_SPI1 SYSCFG_ITLINE25_SR_SPI1_Msk /*!< SPI1 Interrupt */ +#define SYSCFG_ITLINE26_SR_SPI2_Pos (0U) +#define SYSCFG_ITLINE26_SR_SPI2_Msk (0x1UL << SYSCFG_ITLINE26_SR_SPI2_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE26_SR_SPI2 SYSCFG_ITLINE26_SR_SPI2_Msk /*!< SPI2 Interrupt */ +#define SYSCFG_ITLINE26_SR_SPI3_Pos (1U) +#define SYSCFG_ITLINE26_SR_SPI3_Msk (0x1UL << SYSCFG_ITLINE26_SR_SPI3_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE26_SR_SPI3 SYSCFG_ITLINE26_SR_SPI3_Msk /*!< SPI3 Interrupt */ +#define SYSCFG_ITLINE27_SR_USART1_GLB_Pos (0U) +#define SYSCFG_ITLINE27_SR_USART1_GLB_Msk (0x1UL << SYSCFG_ITLINE27_SR_USART1_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE27_SR_USART1_GLB SYSCFG_ITLINE27_SR_USART1_GLB_Msk /*!< USART1 GLB Interrupt -> exti[25] */ +#define SYSCFG_ITLINE28_SR_USART2_GLB_Pos (0U) +#define SYSCFG_ITLINE28_SR_USART2_GLB_Msk (0x1UL << SYSCFG_ITLINE28_SR_USART2_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE28_SR_USART2_GLB SYSCFG_ITLINE28_SR_USART2_GLB_Msk /*!< USART2 GLB Interrupt -> exti[26] */ +#define SYSCFG_ITLINE28_SR_LPUART2_GLB_Pos (1U) +#define SYSCFG_ITLINE28_SR_LPUART2_GLB_Msk (0x1UL << SYSCFG_ITLINE28_SR_LPUART2_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE28_SR_LPUART2_GLB SYSCFG_ITLINE28_SR_LPUART2_GLB_Msk /*!< LPUART2 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART3_GLB_Pos (0U) +#define SYSCFG_ITLINE29_SR_USART3_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART3_GLB_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE29_SR_USART3_GLB SYSCFG_ITLINE29_SR_USART3_GLB_Msk /*!< USART3 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART4_GLB_Pos (1U) +#define SYSCFG_ITLINE29_SR_USART4_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART4_GLB_Pos) /*!< 0x00000002 */ +#define SYSCFG_ITLINE29_SR_USART4_GLB SYSCFG_ITLINE29_SR_USART4_GLB_Msk /*!< USART4 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_LPUART1_GLB_Pos (2U) +#define SYSCFG_ITLINE29_SR_LPUART1_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_LPUART1_GLB_Pos) /*!< 0x00000004 */ +#define SYSCFG_ITLINE29_SR_LPUART1_GLB SYSCFG_ITLINE29_SR_LPUART1_GLB_Msk /*!< LPUART1 GLB Interrupt -> exti[28] */ +#define SYSCFG_ITLINE29_SR_USART5_GLB_Pos (3U) +#define SYSCFG_ITLINE29_SR_USART5_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART5_GLB_Pos) /*!< 0x00000008 */ +#define SYSCFG_ITLINE29_SR_USART5_GLB SYSCFG_ITLINE29_SR_USART5_GLB_Msk /*!< USART5 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART6_GLB_Pos (4U) +#define SYSCFG_ITLINE29_SR_USART6_GLB_Msk (0x1UL << SYSCFG_ITLINE29_SR_USART6_GLB_Pos) /*!< 0x00000010 */ +#define SYSCFG_ITLINE29_SR_USART6_GLB SYSCFG_ITLINE29_SR_USART6_GLB_Msk /*!< USART6 GLB Interrupt */ +#define SYSCFG_ITLINE30_SR_CEC_Pos (0U) +#define SYSCFG_ITLINE30_SR_CEC_Msk (0x1UL << SYSCFG_ITLINE30_SR_CEC_Pos) /*!< 0x00000001 */ +#define SYSCFG_ITLINE30_SR_CEC SYSCFG_ITLINE30_SR_CEC_Msk /*!< CEC Interrupt-> exti[27] */ + +/******************************************************************************/ +/* */ +/* TIM */ +/* */ +/******************************************************************************/ +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ + return result; +} +#endif + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ __clz + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr)) +#else + #define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXH(ptr) ((uint16_t) __ldrex(ptr)) +#else + #define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr)) +#else + #define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXB(value, ptr) __strex(value, ptr) +#else + #define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXH(value, ptr) __strex(value, ptr) +#else + #define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXW(value, ptr) __strex(value, ptr) +#else + #define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __clrex + + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value) +{ + rrx r0, r0 + bx lr +} +#endif + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr)) + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRBT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRHT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRT(value, ptr) __strt(value, ptr) + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +#define __SADD8 __sadd8 +#define __QADD8 __qadd8 +#define __SHADD8 __shadd8 +#define __UADD8 __uadd8 +#define __UQADD8 __uqadd8 +#define __UHADD8 __uhadd8 +#define __SSUB8 __ssub8 +#define __QSUB8 __qsub8 +#define __SHSUB8 __shsub8 +#define __USUB8 __usub8 +#define __UQSUB8 __uqsub8 +#define __UHSUB8 __uhsub8 +#define __SADD16 __sadd16 +#define __QADD16 __qadd16 +#define __SHADD16 __shadd16 +#define __UADD16 __uadd16 +#define __UQADD16 __uqadd16 +#define __UHADD16 __uhadd16 +#define __SSUB16 __ssub16 +#define __QSUB16 __qsub16 +#define __SHSUB16 __shsub16 +#define __USUB16 __usub16 +#define __UQSUB16 __uqsub16 +#define __UHSUB16 __uhsub16 +#define __SASX __sasx +#define __QASX __qasx +#define __SHASX __shasx +#define __UASX __uasx +#define __UQASX __uqasx +#define __UHASX __uhasx +#define __SSAX __ssax +#define __QSAX __qsax +#define __SHSAX __shsax +#define __USAX __usax +#define __UQSAX __uqsax +#define __UHSAX __uhsax +#define __USAD8 __usad8 +#define __USADA8 __usada8 +#define __SSAT16 __ssat16 +#define __USAT16 __usat16 +#define __UXTB16 __uxtb16 +#define __UXTAB16 __uxtab16 +#define __SXTB16 __sxtb16 +#define __SXTAB16 __sxtab16 +#define __SMUAD __smuad +#define __SMUADX __smuadx +#define __SMLAD __smlad +#define __SMLADX __smladx +#define __SMLALD __smlald +#define __SMLALDX __smlaldx +#define __SMUSD __smusd +#define __SMUSDX __smusdx +#define __SMLSD __smlsd +#define __SMLSDX __smlsdx +#define __SMLSLD __smlsld +#define __SMLSLDX __smlsldx +#define __SEL __sel +#define __QADD __qadd +#define __QSUB __qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \ + ((int64_t)(ARG3) << 32U) ) >> 32U)) + +#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCC_H */ diff --git a/Drivers/CMSIS/Include/cmsis_armclang.h b/Drivers/CMSIS/Include/cmsis_armclang.h new file mode 100644 index 0000000..e917f35 --- /dev/null +++ b/Drivers/CMSIS/Include/cmsis_armclang.h @@ -0,0 +1,1444 @@ +/**************************************************************************//** + * @file cmsis_armclang.h + * @brief CMSIS compiler armclang (Arm Compiler 6) header file + * @version V5.2.0 + * @date 08. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ + +#ifndef __CMSIS_ARMCLANG_H +#define __CMSIS_ARMCLANG_H + +#pragma clang system_header /* treat file as system include file */ + +#ifndef __ARM_COMPAT_H +#include /* Compatibility header for Arm Compiler 5 intrinsics */ +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section("RESET"))) +#endif + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); see arm_compat.h */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); see arm_compat.h */ + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq /* see arm_compat.h */ + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq /* see arm_compat.h */ + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF) + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV(value) __builtin_bswap32(value) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16(value) __ROR(__REV(value), 16) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REVSH(value) (int16_t)__builtin_bswap16(value) + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __builtin_arm_rbit + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM Compiler 6.10 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __builtin_arm_ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +#define __SADD8 __builtin_arm_sadd8 +#define __QADD8 __builtin_arm_qadd8 +#define __SHADD8 __builtin_arm_shadd8 +#define __UADD8 __builtin_arm_uadd8 +#define __UQADD8 __builtin_arm_uqadd8 +#define __UHADD8 __builtin_arm_uhadd8 +#define __SSUB8 __builtin_arm_ssub8 +#define __QSUB8 __builtin_arm_qsub8 +#define __SHSUB8 __builtin_arm_shsub8 +#define __USUB8 __builtin_arm_usub8 +#define __UQSUB8 __builtin_arm_uqsub8 +#define __UHSUB8 __builtin_arm_uhsub8 +#define __SADD16 __builtin_arm_sadd16 +#define __QADD16 __builtin_arm_qadd16 +#define __SHADD16 __builtin_arm_shadd16 +#define __UADD16 __builtin_arm_uadd16 +#define __UQADD16 __builtin_arm_uqadd16 +#define __UHADD16 __builtin_arm_uhadd16 +#define __SSUB16 __builtin_arm_ssub16 +#define __QSUB16 __builtin_arm_qsub16 +#define __SHSUB16 __builtin_arm_shsub16 +#define __USUB16 __builtin_arm_usub16 +#define __UQSUB16 __builtin_arm_uqsub16 +#define __UHSUB16 __builtin_arm_uhsub16 +#define __SASX __builtin_arm_sasx +#define __QASX __builtin_arm_qasx +#define __SHASX __builtin_arm_shasx +#define __UASX __builtin_arm_uasx +#define __UQASX __builtin_arm_uqasx +#define __UHASX __builtin_arm_uhasx +#define __SSAX __builtin_arm_ssax +#define __QSAX __builtin_arm_qsax +#define __SHSAX __builtin_arm_shsax +#define __USAX __builtin_arm_usax +#define __UQSAX __builtin_arm_uqsax +#define __UHSAX __builtin_arm_uhsax +#define __USAD8 __builtin_arm_usad8 +#define __USADA8 __builtin_arm_usada8 +#define __SSAT16 __builtin_arm_ssat16 +#define __USAT16 __builtin_arm_usat16 +#define __UXTB16 __builtin_arm_uxtb16 +#define __UXTAB16 __builtin_arm_uxtab16 +#define __SXTB16 __builtin_arm_sxtb16 +#define __SXTAB16 __builtin_arm_sxtab16 +#define __SMUAD __builtin_arm_smuad +#define __SMUADX __builtin_arm_smuadx +#define __SMLAD __builtin_arm_smlad +#define __SMLADX __builtin_arm_smladx +#define __SMLALD __builtin_arm_smlald +#define __SMLALDX __builtin_arm_smlaldx +#define __SMUSD __builtin_arm_smusd +#define __SMUSDX __builtin_arm_smusdx +#define __SMLSD __builtin_arm_smlsd +#define __SMLSDX __builtin_arm_smlsdx +#define __SMLSLD __builtin_arm_smlsld +#define __SMLSLDX __builtin_arm_smlsldx +#define __SEL __builtin_arm_sel +#define __QADD __builtin_arm_qadd +#define __QSUB __builtin_arm_qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCLANG_H */ diff --git a/Drivers/CMSIS/Include/cmsis_armclang_ltm.h b/Drivers/CMSIS/Include/cmsis_armclang_ltm.h new file mode 100644 index 0000000..feec324 --- /dev/null +++ b/Drivers/CMSIS/Include/cmsis_armclang_ltm.h @@ -0,0 +1,1891 @@ +/**************************************************************************//** + * @file cmsis_armclang_ltm.h + * @brief CMSIS compiler armclang (Arm Compiler 6) header file + * @version V1.2.0 + * @date 08. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2018-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ + +#ifndef __CMSIS_ARMCLANG_H +#define __CMSIS_ARMCLANG_H + +#pragma clang system_header /* treat file as system include file */ + +#ifndef __ARM_COMPAT_H +#include /* Compatibility header for Arm Compiler 5 intrinsics */ +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section("RESET"))) +#endif + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); see arm_compat.h */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); see arm_compat.h */ + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq /* see arm_compat.h */ + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq /* see arm_compat.h */ + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF) + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV(value) __builtin_bswap32(value) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16(value) __ROR(__REV(value), 16) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REVSH(value) (int16_t)__builtin_bswap16(value) + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __builtin_arm_rbit + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM Compiler 6.10 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __builtin_arm_ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCLANG_H */ diff --git a/Drivers/CMSIS/Include/cmsis_compiler.h b/Drivers/CMSIS/Include/cmsis_compiler.h new file mode 100644 index 0000000..adbf296 --- /dev/null +++ b/Drivers/CMSIS/Include/cmsis_compiler.h @@ -0,0 +1,283 @@ +/**************************************************************************//** + * @file cmsis_compiler.h + * @brief CMSIS compiler generic header file + * @version V5.1.0 + * @date 09. October 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_COMPILER_H +#define __CMSIS_COMPILER_H + +#include + +/* + * Arm Compiler 4/5 + */ +#if defined ( __CC_ARM ) + #include "cmsis_armcc.h" + + +/* + * Arm Compiler 6.6 LTM (armclang) + */ +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) && (__ARMCC_VERSION < 6100100) + #include "cmsis_armclang_ltm.h" + + /* + * Arm Compiler above 6.10.1 (armclang) + */ +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6100100) + #include "cmsis_armclang.h" + + +/* + * GNU Compiler + */ +#elif defined ( __GNUC__ ) + #include "cmsis_gcc.h" + + +/* + * IAR Compiler + */ +#elif defined ( __ICCARM__ ) + #include + + +/* + * TI Arm Compiler + */ +#elif defined ( __TI_ARM__ ) + #include + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __attribute__((packed)) + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed)) + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed)) + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) + #endif + #ifndef __RESTRICT + #define __RESTRICT __restrict + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +/* + * TASKING Compiler + */ +#elif defined ( __TASKING__ ) + /* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all intrinsics, + * Including the CMSIS ones. + */ + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __packed__ + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __packed__ + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __packed__ + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __packed__ T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __align(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +/* + * COSMIC Compiler + */ +#elif defined ( __CSMC__ ) + #include + + #ifndef __ASM + #define __ASM _asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + // NO RETURN is automatically detected hence no warning here + #define __NO_RETURN + #endif + #ifndef __USED + #warning No compiler specific solution for __USED. __USED is ignored. + #define __USED + #endif + #ifndef __WEAK + #define __WEAK __weak + #endif + #ifndef __PACKED + #define __PACKED @packed + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT @packed struct + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION @packed union + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + @packed struct T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored. + #define __ALIGNED(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +#else + #error Unknown compiler. +#endif + + +#endif /* __CMSIS_COMPILER_H */ + diff --git a/Drivers/CMSIS/Include/cmsis_gcc.h b/Drivers/CMSIS/Include/cmsis_gcc.h new file mode 100644 index 0000000..3ddcc58 --- /dev/null +++ b/Drivers/CMSIS/Include/cmsis_gcc.h @@ -0,0 +1,2168 @@ +/**************************************************************************//** + * @file cmsis_gcc.h + * @brief CMSIS compiler GCC header file + * @version V5.2.0 + * @date 08. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_GCC_H +#define __CMSIS_GCC_H + +/* ignore some GCC warnings */ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wsign-conversion" +#pragma GCC diagnostic ignored "-Wconversion" +#pragma GCC diagnostic ignored "-Wunused-parameter" + +/* Fallback for __has_builtin */ +#ifndef __has_builtin + #define __has_builtin(x) (0) +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START + +/** + \brief Initializes data and bss sections + \details This default implementations initialized all data and additional bss + sections relying on .copy.table and .zero.table specified properly + in the used linker script. + + */ +__STATIC_FORCEINLINE __NO_RETURN void __cmsis_start(void) +{ + extern void _start(void) __NO_RETURN; + + typedef struct { + uint32_t const* src; + uint32_t* dest; + uint32_t wlen; + } __copy_table_t; + + typedef struct { + uint32_t* dest; + uint32_t wlen; + } __zero_table_t; + + extern const __copy_table_t __copy_table_start__; + extern const __copy_table_t __copy_table_end__; + extern const __zero_table_t __zero_table_start__; + extern const __zero_table_t __zero_table_end__; + + for (__copy_table_t const* pTable = &__copy_table_start__; pTable < &__copy_table_end__; ++pTable) { + for(uint32_t i=0u; iwlen; ++i) { + pTable->dest[i] = pTable->src[i]; + } + } + + for (__zero_table_t const* pTable = &__zero_table_start__; pTable < &__zero_table_end__; ++pTable) { + for(uint32_t i=0u; iwlen; ++i) { + pTable->dest[i] = 0u; + } + } + + _start(); +} + +#define __PROGRAM_START __cmsis_start +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP __StackTop +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT __StackLimit +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section(".vectors"))) +#endif + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) :: "memory"); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) :: "memory"); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_FORCEINLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_get_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + return __builtin_arm_get_fpscr(); +#else + uint32_t result; + + __ASM volatile ("VMRS %0, fpscr" : "=r" (result) ); + return(result); +#endif +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_FORCEINLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_set_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + __builtin_arm_set_fpscr(fpscr); +#else + __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc", "memory"); +#endif +#else + (void)fpscr; +#endif +} + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP() __ASM volatile ("nop") + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI() __ASM volatile ("wfi") + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE() __ASM volatile ("wfe") + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV() __ASM volatile ("sev") + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +__STATIC_FORCEINLINE void __ISB(void) +{ + __ASM volatile ("isb 0xF":::"memory"); +} + + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +__STATIC_FORCEINLINE void __DSB(void) +{ + __ASM volatile ("dsb 0xF":::"memory"); +} + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +__STATIC_FORCEINLINE void __DMB(void) +{ + __ASM volatile ("dmb 0xF":::"memory"); +} + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV(uint32_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) + return __builtin_bswap32(value); +#else + uint32_t result; + + __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV16(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE int16_t __REVSH(int16_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + return (int16_t)__builtin_bswap16(value); +#else + int16_t result; + + __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); +#else + uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ +#endif + return result; +} + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM GCC 7.3 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDREXB(volatile uint8_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDREXH(volatile uint16_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDREXW(volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + return(result); +} + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + return(result); +} + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +__STATIC_FORCEINLINE void __CLREX(void) +{ + __ASM volatile ("clrex" ::: "memory"); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT(ARG1,ARG2) \ +__extension__ \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT(ARG1,ARG2) \ + __extension__ \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAEXB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexb %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAEXH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexh %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDAEX(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaex %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexb %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexh %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlex %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#if 0 +#define __PKHBT(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +#define __PKHTB(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + if (ARG3 == 0) \ + __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ + else \ + __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) +#endif + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#pragma GCC diagnostic pop + +#endif /* __CMSIS_GCC_H */ diff --git a/Drivers/CMSIS/Include/cmsis_iccarm.h b/Drivers/CMSIS/Include/cmsis_iccarm.h new file mode 100644 index 0000000..12d68fd --- /dev/null +++ b/Drivers/CMSIS/Include/cmsis_iccarm.h @@ -0,0 +1,964 @@ +/**************************************************************************//** + * @file cmsis_iccarm.h + * @brief CMSIS compiler ICCARM (IAR Compiler for Arm) header file + * @version V5.1.0 + * @date 08. May 2019 + ******************************************************************************/ + +//------------------------------------------------------------------------------ +// +// Copyright (c) 2017-2019 IAR Systems +// Copyright (c) 2017-2019 Arm Limited. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License") +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +// +//------------------------------------------------------------------------------ + + +#ifndef __CMSIS_ICCARM_H__ +#define __CMSIS_ICCARM_H__ + +#ifndef __ICCARM__ + #error This file should only be compiled by ICCARM +#endif + +#pragma system_include + +#define __IAR_FT _Pragma("inline=forced") __intrinsic + +#if (__VER__ >= 8000000) + #define __ICCARM_V8 1 +#else + #define __ICCARM_V8 0 +#endif + +#ifndef __ALIGNED + #if __ICCARM_V8 + #define __ALIGNED(x) __attribute__((aligned(x))) + #elif (__VER__ >= 7080000) + /* Needs IAR language extensions */ + #define __ALIGNED(x) __attribute__((aligned(x))) + #else + #warning No compiler specific solution for __ALIGNED.__ALIGNED is ignored. + #define __ALIGNED(x) + #endif +#endif + + +/* Define compiler macros for CPU architecture, used in CMSIS 5. + */ +#if __ARM_ARCH_6M__ || __ARM_ARCH_7M__ || __ARM_ARCH_7EM__ || __ARM_ARCH_8M_BASE__ || __ARM_ARCH_8M_MAIN__ +/* Macros already defined */ +#else + #if defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM_ARCH_PROFILE) && __ARM_ARCH_PROFILE == 'M' + #if __ARM_ARCH == 6 + #define __ARM_ARCH_6M__ 1 + #elif __ARM_ARCH == 7 + #if __ARM_FEATURE_DSP + #define __ARM_ARCH_7EM__ 1 + #else + #define __ARM_ARCH_7M__ 1 + #endif + #endif /* __ARM_ARCH */ + #endif /* __ARM_ARCH_PROFILE == 'M' */ +#endif + +/* Alternativ core deduction for older ICCARM's */ +#if !defined(__ARM_ARCH_6M__) && !defined(__ARM_ARCH_7M__) && !defined(__ARM_ARCH_7EM__) && \ + !defined(__ARM_ARCH_8M_BASE__) && !defined(__ARM_ARCH_8M_MAIN__) + #if defined(__ARM6M__) && (__CORE__ == __ARM6M__) + #define __ARM_ARCH_6M__ 1 + #elif defined(__ARM7M__) && (__CORE__ == __ARM7M__) + #define __ARM_ARCH_7M__ 1 + #elif defined(__ARM7EM__) && (__CORE__ == __ARM7EM__) + #define __ARM_ARCH_7EM__ 1 + #elif defined(__ARM8M_BASELINE__) && (__CORE == __ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM8M_MAINLINE__) && (__CORE == __ARM8M_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8EM_MAINLINE__) && (__CORE == __ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #else + #error "Unknown target." + #endif +#endif + + + +#if defined(__ARM_ARCH_6M__) && __ARM_ARCH_6M__==1 + #define __IAR_M0_FAMILY 1 +#elif defined(__ARM_ARCH_8M_BASE__) && __ARM_ARCH_8M_BASE__==1 + #define __IAR_M0_FAMILY 1 +#else + #define __IAR_M0_FAMILY 0 +#endif + + +#ifndef __ASM + #define __ASM __asm +#endif + +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +#ifndef __INLINE + #define __INLINE inline +#endif + +#ifndef __NO_RETURN + #if __ICCARM_V8 + #define __NO_RETURN __attribute__((__noreturn__)) + #else + #define __NO_RETURN _Pragma("object_attribute=__noreturn") + #endif +#endif + +#ifndef __PACKED + #if __ICCARM_V8 + #define __PACKED __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED __packed + #endif +#endif + +#ifndef __PACKED_STRUCT + #if __ICCARM_V8 + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_STRUCT __packed struct + #endif +#endif + +#ifndef __PACKED_UNION + #if __ICCARM_V8 + #define __PACKED_UNION union __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_UNION __packed union + #endif +#endif + +#ifndef __RESTRICT + #if __ICCARM_V8 + #define __RESTRICT __restrict + #else + /* Needs IAR language extensions */ + #define __RESTRICT restrict + #endif +#endif + +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif + +#ifndef __FORCEINLINE + #define __FORCEINLINE _Pragma("inline=forced") +#endif + +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __FORCEINLINE __STATIC_INLINE +#endif + +#ifndef __UNALIGNED_UINT16_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint16_t __iar_uint16_read(void const *ptr) +{ + return *(__packed uint16_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT16_READ(PTR) __iar_uint16_read(PTR) +#endif + + +#ifndef __UNALIGNED_UINT16_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint16_write(void const *ptr, uint16_t val) +{ + *(__packed uint16_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT16_WRITE(PTR,VAL) __iar_uint16_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint32_t __iar_uint32_read(void const *ptr) +{ + return *(__packed uint32_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT32_READ(PTR) __iar_uint32_read(PTR) +#endif + +#ifndef __UNALIGNED_UINT32_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint32_write(void const *ptr, uint32_t val) +{ + *(__packed uint32_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT32_WRITE(PTR,VAL) __iar_uint32_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32 /* deprecated */ +#pragma language=save +#pragma language=extended +__packed struct __iar_u32 { uint32_t v; }; +#pragma language=restore +#define __UNALIGNED_UINT32(PTR) (((struct __iar_u32 *)(PTR))->v) +#endif + +#ifndef __USED + #if __ICCARM_V8 + #define __USED __attribute__((used)) + #else + #define __USED _Pragma("__root") + #endif +#endif + +#ifndef __WEAK + #if __ICCARM_V8 + #define __WEAK __attribute__((weak)) + #else + #define __WEAK _Pragma("__weak") + #endif +#endif + +#ifndef __PROGRAM_START +#define __PROGRAM_START __iar_program_start +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP CSTACK$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT CSTACK$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __vector_table +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE @".intvec" +#endif + +#ifndef __ICCARM_INTRINSICS_VERSION__ + #define __ICCARM_INTRINSICS_VERSION__ 0 +#endif + +#if __ICCARM_INTRINSICS_VERSION__ == 2 + + #if defined(__CLZ) + #undef __CLZ + #endif + #if defined(__REVSH) + #undef __REVSH + #endif + #if defined(__RBIT) + #undef __RBIT + #endif + #if defined(__SSAT) + #undef __SSAT + #endif + #if defined(__USAT) + #undef __USAT + #endif + + #include "iccarm_builtin.h" + + #define __disable_fault_irq __iar_builtin_disable_fiq + #define __disable_irq __iar_builtin_disable_interrupt + #define __enable_fault_irq __iar_builtin_enable_fiq + #define __enable_irq __iar_builtin_enable_interrupt + #define __arm_rsr __iar_builtin_rsr + #define __arm_wsr __iar_builtin_wsr + + + #define __get_APSR() (__arm_rsr("APSR")) + #define __get_BASEPRI() (__arm_rsr("BASEPRI")) + #define __get_CONTROL() (__arm_rsr("CONTROL")) + #define __get_FAULTMASK() (__arm_rsr("FAULTMASK")) + + #if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + #define __get_FPSCR() (__arm_rsr("FPSCR")) + #define __set_FPSCR(VALUE) (__arm_wsr("FPSCR", (VALUE))) + #else + #define __get_FPSCR() ( 0 ) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #define __get_IPSR() (__arm_rsr("IPSR")) + #define __get_MSP() (__arm_rsr("MSP")) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __get_MSPLIM() (0U) + #else + #define __get_MSPLIM() (__arm_rsr("MSPLIM")) + #endif + #define __get_PRIMASK() (__arm_rsr("PRIMASK")) + #define __get_PSP() (__arm_rsr("PSP")) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __get_PSPLIM() (0U) + #else + #define __get_PSPLIM() (__arm_rsr("PSPLIM")) + #endif + + #define __get_xPSR() (__arm_rsr("xPSR")) + + #define __set_BASEPRI(VALUE) (__arm_wsr("BASEPRI", (VALUE))) + #define __set_BASEPRI_MAX(VALUE) (__arm_wsr("BASEPRI_MAX", (VALUE))) + #define __set_CONTROL(VALUE) (__arm_wsr("CONTROL", (VALUE))) + #define __set_FAULTMASK(VALUE) (__arm_wsr("FAULTMASK", (VALUE))) + #define __set_MSP(VALUE) (__arm_wsr("MSP", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __set_MSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_MSPLIM(VALUE) (__arm_wsr("MSPLIM", (VALUE))) + #endif + #define __set_PRIMASK(VALUE) (__arm_wsr("PRIMASK", (VALUE))) + #define __set_PSP(VALUE) (__arm_wsr("PSP", (VALUE))) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __set_PSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_PSPLIM(VALUE) (__arm_wsr("PSPLIM", (VALUE))) + #endif + + #define __TZ_get_CONTROL_NS() (__arm_rsr("CONTROL_NS")) + #define __TZ_set_CONTROL_NS(VALUE) (__arm_wsr("CONTROL_NS", (VALUE))) + #define __TZ_get_PSP_NS() (__arm_rsr("PSP_NS")) + #define __TZ_set_PSP_NS(VALUE) (__arm_wsr("PSP_NS", (VALUE))) + #define __TZ_get_MSP_NS() (__arm_rsr("MSP_NS")) + #define __TZ_set_MSP_NS(VALUE) (__arm_wsr("MSP_NS", (VALUE))) + #define __TZ_get_SP_NS() (__arm_rsr("SP_NS")) + #define __TZ_set_SP_NS(VALUE) (__arm_wsr("SP_NS", (VALUE))) + #define __TZ_get_PRIMASK_NS() (__arm_rsr("PRIMASK_NS")) + #define __TZ_set_PRIMASK_NS(VALUE) (__arm_wsr("PRIMASK_NS", (VALUE))) + #define __TZ_get_BASEPRI_NS() (__arm_rsr("BASEPRI_NS")) + #define __TZ_set_BASEPRI_NS(VALUE) (__arm_wsr("BASEPRI_NS", (VALUE))) + #define __TZ_get_FAULTMASK_NS() (__arm_rsr("FAULTMASK_NS")) + #define __TZ_set_FAULTMASK_NS(VALUE)(__arm_wsr("FAULTMASK_NS", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __TZ_get_PSPLIM_NS() (0U) + #define __TZ_set_PSPLIM_NS(VALUE) ((void)(VALUE)) + #else + #define __TZ_get_PSPLIM_NS() (__arm_rsr("PSPLIM_NS")) + #define __TZ_set_PSPLIM_NS(VALUE) (__arm_wsr("PSPLIM_NS", (VALUE))) + #endif + + #define __TZ_get_MSPLIM_NS() (__arm_rsr("MSPLIM_NS")) + #define __TZ_set_MSPLIM_NS(VALUE) (__arm_wsr("MSPLIM_NS", (VALUE))) + + #define __NOP __iar_builtin_no_operation + + #define __CLZ __iar_builtin_CLZ + #define __CLREX __iar_builtin_CLREX + + #define __DMB __iar_builtin_DMB + #define __DSB __iar_builtin_DSB + #define __ISB __iar_builtin_ISB + + #define __LDREXB __iar_builtin_LDREXB + #define __LDREXH __iar_builtin_LDREXH + #define __LDREXW __iar_builtin_LDREX + + #define __RBIT __iar_builtin_RBIT + #define __REV __iar_builtin_REV + #define __REV16 __iar_builtin_REV16 + + __IAR_FT int16_t __REVSH(int16_t val) + { + return (int16_t) __iar_builtin_REVSH(val); + } + + #define __ROR __iar_builtin_ROR + #define __RRX __iar_builtin_RRX + + #define __SEV __iar_builtin_SEV + + #if !__IAR_M0_FAMILY + #define __SSAT __iar_builtin_SSAT + #endif + + #define __STREXB __iar_builtin_STREXB + #define __STREXH __iar_builtin_STREXH + #define __STREXW __iar_builtin_STREX + + #if !__IAR_M0_FAMILY + #define __USAT __iar_builtin_USAT + #endif + + #define __WFE __iar_builtin_WFE + #define __WFI __iar_builtin_WFI + + #if __ARM_MEDIA__ + #define __SADD8 __iar_builtin_SADD8 + #define __QADD8 __iar_builtin_QADD8 + #define __SHADD8 __iar_builtin_SHADD8 + #define __UADD8 __iar_builtin_UADD8 + #define __UQADD8 __iar_builtin_UQADD8 + #define __UHADD8 __iar_builtin_UHADD8 + #define __SSUB8 __iar_builtin_SSUB8 + #define __QSUB8 __iar_builtin_QSUB8 + #define __SHSUB8 __iar_builtin_SHSUB8 + #define __USUB8 __iar_builtin_USUB8 + #define __UQSUB8 __iar_builtin_UQSUB8 + #define __UHSUB8 __iar_builtin_UHSUB8 + #define __SADD16 __iar_builtin_SADD16 + #define __QADD16 __iar_builtin_QADD16 + #define __SHADD16 __iar_builtin_SHADD16 + #define __UADD16 __iar_builtin_UADD16 + #define __UQADD16 __iar_builtin_UQADD16 + #define __UHADD16 __iar_builtin_UHADD16 + #define __SSUB16 __iar_builtin_SSUB16 + #define __QSUB16 __iar_builtin_QSUB16 + #define __SHSUB16 __iar_builtin_SHSUB16 + #define __USUB16 __iar_builtin_USUB16 + #define __UQSUB16 __iar_builtin_UQSUB16 + #define __UHSUB16 __iar_builtin_UHSUB16 + #define __SASX __iar_builtin_SASX + #define __QASX __iar_builtin_QASX + #define __SHASX __iar_builtin_SHASX + #define __UASX __iar_builtin_UASX + #define __UQASX __iar_builtin_UQASX + #define __UHASX __iar_builtin_UHASX + #define __SSAX __iar_builtin_SSAX + #define __QSAX __iar_builtin_QSAX + #define __SHSAX __iar_builtin_SHSAX + #define __USAX __iar_builtin_USAX + #define __UQSAX __iar_builtin_UQSAX + #define __UHSAX __iar_builtin_UHSAX + #define __USAD8 __iar_builtin_USAD8 + #define __USADA8 __iar_builtin_USADA8 + #define __SSAT16 __iar_builtin_SSAT16 + #define __USAT16 __iar_builtin_USAT16 + #define __UXTB16 __iar_builtin_UXTB16 + #define __UXTAB16 __iar_builtin_UXTAB16 + #define __SXTB16 __iar_builtin_SXTB16 + #define __SXTAB16 __iar_builtin_SXTAB16 + #define __SMUAD __iar_builtin_SMUAD + #define __SMUADX __iar_builtin_SMUADX + #define __SMMLA __iar_builtin_SMMLA + #define __SMLAD __iar_builtin_SMLAD + #define __SMLADX __iar_builtin_SMLADX + #define __SMLALD __iar_builtin_SMLALD + #define __SMLALDX __iar_builtin_SMLALDX + #define __SMUSD __iar_builtin_SMUSD + #define __SMUSDX __iar_builtin_SMUSDX + #define __SMLSD __iar_builtin_SMLSD + #define __SMLSDX __iar_builtin_SMLSDX + #define __SMLSLD __iar_builtin_SMLSLD + #define __SMLSLDX __iar_builtin_SMLSLDX + #define __SEL __iar_builtin_SEL + #define __QADD __iar_builtin_QADD + #define __QSUB __iar_builtin_QSUB + #define __PKHBT __iar_builtin_PKHBT + #define __PKHTB __iar_builtin_PKHTB + #endif + +#else /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #define __CLZ __cmsis_iar_clz_not_active + #define __SSAT __cmsis_iar_ssat_not_active + #define __USAT __cmsis_iar_usat_not_active + #define __RBIT __cmsis_iar_rbit_not_active + #define __get_APSR __cmsis_iar_get_APSR_not_active + #endif + + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #define __get_FPSCR __cmsis_iar_get_FPSR_not_active + #define __set_FPSCR __cmsis_iar_set_FPSR_not_active + #endif + + #ifdef __INTRINSICS_INCLUDED + #error intrinsics.h is already included previously! + #endif + + #include + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #undef __CLZ + #undef __SSAT + #undef __USAT + #undef __RBIT + #undef __get_APSR + + __STATIC_INLINE uint8_t __CLZ(uint32_t data) + { + if (data == 0U) { return 32U; } + + uint32_t count = 0U; + uint32_t mask = 0x80000000U; + + while ((data & mask) == 0U) + { + count += 1U; + mask = mask >> 1U; + } + return count; + } + + __STATIC_INLINE uint32_t __RBIT(uint32_t v) + { + uint8_t sc = 31U; + uint32_t r = v; + for (v >>= 1U; v; v >>= 1U) + { + r <<= 1U; + r |= v & 1U; + sc--; + } + return (r << sc); + } + + __STATIC_INLINE uint32_t __get_APSR(void) + { + uint32_t res; + __asm("MRS %0,APSR" : "=r" (res)); + return res; + } + + #endif + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #undef __get_FPSCR + #undef __set_FPSCR + #define __get_FPSCR() (0) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #pragma diag_suppress=Pe940 + #pragma diag_suppress=Pe177 + + #define __enable_irq __enable_interrupt + #define __disable_irq __disable_interrupt + #define __NOP __no_operation + + #define __get_xPSR __get_PSR + + #if (!defined(__ARM_ARCH_6M__) || __ARM_ARCH_6M__==0) + + __IAR_FT uint32_t __LDREXW(uint32_t volatile *ptr) + { + return __LDREX((unsigned long *)ptr); + } + + __IAR_FT uint32_t __STREXW(uint32_t value, uint32_t volatile *ptr) + { + return __STREX(value, (unsigned long *)ptr); + } + #endif + + + /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + #if (__CORTEX_M >= 0x03) + + __IAR_FT uint32_t __RRX(uint32_t value) + { + uint32_t result; + __ASM("RRX %0, %1" : "=r"(result) : "r" (value) : "cc"); + return(result); + } + + __IAR_FT void __set_BASEPRI_MAX(uint32_t value) + { + __asm volatile("MSR BASEPRI_MAX,%0"::"r" (value)); + } + + + #define __enable_fault_irq __enable_fiq + #define __disable_fault_irq __disable_fiq + + + #endif /* (__CORTEX_M >= 0x03) */ + + __IAR_FT uint32_t __ROR(uint32_t op1, uint32_t op2) + { + return (op1 >> op2) | (op1 << ((sizeof(op1)*8)-op2)); + } + + #if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + __IAR_FT uint32_t __get_MSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,MSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_MSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR MSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __get_PSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_PSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_CONTROL_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,CONTROL_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_CONTROL_NS(uint32_t value) + { + __asm volatile("MSR CONTROL_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PSP_NS(uint32_t value) + { + __asm volatile("MSR PSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_MSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSP_NS(uint32_t value) + { + __asm volatile("MSR MSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_SP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,SP_NS" : "=r" (res)); + return res; + } + __IAR_FT void __TZ_set_SP_NS(uint32_t value) + { + __asm volatile("MSR SP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PRIMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PRIMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PRIMASK_NS(uint32_t value) + { + __asm volatile("MSR PRIMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_BASEPRI_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,BASEPRI_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_BASEPRI_NS(uint32_t value) + { + __asm volatile("MSR BASEPRI_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_FAULTMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,FAULTMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_FAULTMASK_NS(uint32_t value) + { + __asm volatile("MSR FAULTMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PSPLIM_NS(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM_NS" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __TZ_set_PSPLIM_NS(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM_NS,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_MSPLIM_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSPLIM_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSPLIM_NS(uint32_t value) + { + __asm volatile("MSR MSPLIM_NS,%0" :: "r" (value)); + } + + #endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#endif /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + +#define __BKPT(value) __asm volatile ("BKPT %0" : : "i"(value)) + +#if __IAR_M0_FAMILY + __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) + { + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; + } + + __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) + { + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; + } +#endif + +#if (__CORTEX_M >= 0x03) /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + + __IAR_FT uint8_t __LDRBT(volatile uint8_t *addr) + { + uint32_t res; + __ASM("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDRHT(volatile uint16_t *addr) + { + uint32_t res; + __ASM("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDRT(volatile uint32_t *addr) + { + uint32_t res; + __ASM("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return res; + } + + __IAR_FT void __STRBT(uint8_t value, volatile uint8_t *addr) + { + __ASM("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRHT(uint16_t value, volatile uint16_t *addr) + { + __ASM("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRT(uint32_t value, volatile uint32_t *addr) + { + __ASM("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory"); + } + +#endif /* (__CORTEX_M >= 0x03) */ + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + + __IAR_FT uint8_t __LDAB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDA(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDA %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT void __STLB(uint8_t value, volatile uint8_t *ptr) + { + __ASM volatile ("STLB %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STLH(uint16_t value, volatile uint16_t *ptr) + { + __ASM volatile ("STLH %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STL(uint32_t value, volatile uint32_t *ptr) + { + __ASM volatile ("STL %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT uint8_t __LDAEXB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAEXH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDAEX(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEX %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXB %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXH %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEX %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + +#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#undef __IAR_FT +#undef __IAR_M0_FAMILY +#undef __ICCARM_V8 + +#pragma diag_default=Pe940 +#pragma diag_default=Pe177 + +#endif /* __CMSIS_ICCARM_H__ */ diff --git a/Drivers/CMSIS/Include/cmsis_version.h b/Drivers/CMSIS/Include/cmsis_version.h new file mode 100644 index 0000000..f2e2746 --- /dev/null +++ b/Drivers/CMSIS/Include/cmsis_version.h @@ -0,0 +1,39 @@ +/**************************************************************************//** + * @file cmsis_version.h + * @brief CMSIS Core(M) Version definitions + * @version V5.0.3 + * @date 24. June 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CMSIS_VERSION_H +#define __CMSIS_VERSION_H + +/* CMSIS Version definitions */ +#define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */ +#define __CM_CMSIS_VERSION_SUB ( 3U) /*!< [15:0] CMSIS Core(M) sub version */ +#define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \ + __CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */ +#endif diff --git a/Drivers/CMSIS/Include/core_armv81mml.h b/Drivers/CMSIS/Include/core_armv81mml.h new file mode 100644 index 0000000..8441e57 --- /dev/null +++ b/Drivers/CMSIS/Include/core_armv81mml.h @@ -0,0 +1,2968 @@ +/**************************************************************************//** + * @file core_armv81mml.h + * @brief CMSIS Armv8.1-M Mainline Core Peripheral Access Layer Header File + * @version V1.0.0 + * @date 15. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2018-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV81MML_H_GENERIC +#define __CORE_ARMV81MML_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMV81MML + @{ + */ + +#include "cmsis_version.h" + +#define __ARM_ARCH_8M_MAIN__ 1 // patching for now +/* CMSIS ARMV81MML definitions */ +#define __ARMv81MML_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv81MML_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv81MML_CMSIS_VERSION ((__ARMv81MML_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv81MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (81U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV81MML_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV81MML_H_DEPENDANT +#define __CORE_ARMV81MML_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv81MML_REV + #define __ARMv81MML_REV 0x0000U + #warning "__ARMv81MML_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv81MML */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */ +#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */ +#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_PXN_Pos 4U /*!< MPU RLAR: PXN Position */ +#define MPU_RLAR_PXN_Msk (0x1UL << MPU_RLAR_PXN_Pos) /*!< MPU RLAR: PXN Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV81MML_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_armv8mbl.h b/Drivers/CMSIS/Include/core_armv8mbl.h new file mode 100644 index 0000000..344dca5 --- /dev/null +++ b/Drivers/CMSIS/Include/core_armv8mbl.h @@ -0,0 +1,1921 @@ +/**************************************************************************//** + * @file core_armv8mbl.h + * @brief CMSIS Armv8-M Baseline Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV8MBL_H_GENERIC +#define __CORE_ARMV8MBL_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMv8MBL + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS definitions */ +#define __ARMv8MBL_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv8MBL_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv8MBL_CMSIS_VERSION ((__ARMv8MBL_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv8MBL_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M ( 2U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MBL_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV8MBL_H_DEPENDANT +#define __CORE_ARMV8MBL_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv8MBL_REV + #define __ARMv8MBL_REV 0x0000U + #warning "__ARMv8MBL_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif + + #ifndef __ETM_PRESENT + #define __ETM_PRESENT 0U + #warning "__ETM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MTB_PRESENT + #define __MTB_PRESENT 0U + #warning "__MTB_PRESENT not defined in device header file; using default!" + #endif + +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv8MBL */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + uint32_t RESERVED0[6U]; + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + uint32_t RESERVED0[7U]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#endif +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MBL_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_armv8mml.h b/Drivers/CMSIS/Include/core_armv8mml.h new file mode 100644 index 0000000..5ddb8ae --- /dev/null +++ b/Drivers/CMSIS/Include/core_armv8mml.h @@ -0,0 +1,2835 @@ +/**************************************************************************//** + * @file core_armv8mml.h + * @brief CMSIS Armv8-M Mainline Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 12. September 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV8MML_H_GENERIC +#define __CORE_ARMV8MML_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMv8MML + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS Armv8MML definitions */ +#define __ARMv8MML_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv8MML_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv8MML_CMSIS_VERSION ((__ARMv8MML_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv8MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (81U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MML_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV8MML_H_DEPENDANT +#define __CORE_ARMV8MML_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv8MML_REV + #define __ARMv8MML_REV 0x0000U + #warning "__ARMv8MML_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv8MML */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MML_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_cm0.h b/Drivers/CMSIS/Include/core_cm0.h new file mode 100644 index 0000000..cafae5a --- /dev/null +++ b/Drivers/CMSIS/Include/core_cm0.h @@ -0,0 +1,952 @@ +/**************************************************************************//** + * @file core_cm0.h + * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File + * @version V5.0.6 + * @date 13. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0_H_GENERIC +#define __CORE_CM0_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M0 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM0 definitions */ +#define __CM0_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM0_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \ + __CM0_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (0U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0_H_DEPENDANT +#define __CORE_CM0_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0_REV + #define __CM0_REV 0x0000U + #warning "__CM0_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M0 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + Address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = 0x0U; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M0 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = 0x0U; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_cm0plus.h b/Drivers/CMSIS/Include/core_cm0plus.h new file mode 100644 index 0000000..d104965 --- /dev/null +++ b/Drivers/CMSIS/Include/core_cm0plus.h @@ -0,0 +1,1085 @@ +/**************************************************************************//** + * @file core_cm0plus.h + * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File + * @version V5.0.7 + * @date 13. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0PLUS_H_GENERIC +#define __CORE_CM0PLUS_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex-M0+ + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM0+ definitions */ +#define __CM0PLUS_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM0PLUS_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \ + __CM0PLUS_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (0U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0PLUS_H_DEPENDANT +#define __CORE_CM0PLUS_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0PLUS_REV + #define __CM0PLUS_REV 0x0000U + #warning "__CM0PLUS_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex-M0+ */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0+ header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0+ */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t vectors = SCB->VTOR; +#else + uint32_t vectors = 0x0U; +#endif + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M0+ does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t vectors = SCB->VTOR; +#else + uint32_t vectors = 0x0U; +#endif + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_cm1.h b/Drivers/CMSIS/Include/core_cm1.h new file mode 100644 index 0000000..76b4569 --- /dev/null +++ b/Drivers/CMSIS/Include/core_cm1.h @@ -0,0 +1,979 @@ +/**************************************************************************//** + * @file core_cm1.h + * @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File + * @version V1.0.1 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM1_H_GENERIC +#define __CORE_CM1_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M1 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM1 definitions */ +#define __CM1_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM1_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM1_CMSIS_VERSION ((__CM1_CMSIS_VERSION_MAIN << 16U) | \ + __CM1_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (1U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM1_H_DEPENDANT +#define __CORE_CM1_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM1_REV + #define __CM1_REV 0x0100U + #warning "__CM1_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M1 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_ITCMUAEN_Pos 4U /*!< ACTLR: Instruction TCM Upper Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMUAEN_Msk (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos) /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */ + +#define SCnSCB_ACTLR_ITCMLAEN_Pos 3U /*!< ACTLR: Instruction TCM Lower Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMLAEN_Msk (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos) /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M1 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M1 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + Address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)0x0U; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M1 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)0x0U; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_cm23.h b/Drivers/CMSIS/Include/core_cm23.h new file mode 100644 index 0000000..b79c6af --- /dev/null +++ b/Drivers/CMSIS/Include/core_cm23.h @@ -0,0 +1,1996 @@ +/**************************************************************************//** + * @file core_cm23.h + * @brief CMSIS Cortex-M23 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM23_H_GENERIC +#define __CORE_CM23_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M23 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS definitions */ +#define __CM23_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM23_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM23_CMSIS_VERSION ((__CM23_CMSIS_VERSION_MAIN << 16U) | \ + __CM23_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (23U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM23_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM23_H_DEPENDANT +#define __CORE_CM23_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM23_REV + #define __CM23_REV 0x0000U + #warning "__CM23_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif + + #ifndef __ETM_PRESENT + #define __ETM_PRESENT 0U + #warning "__ETM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MTB_PRESENT + #define __MTB_PRESENT 0U + #warning "__MTB_PRESENT not defined in device header file; using default!" + #endif + +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M23 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + uint32_t RESERVED0[6U]; + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + uint32_t RESERVED0[7U]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#endif +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else +/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for Cortex-M23 */ +/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for Cortex-M23 */ + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM23_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_cm3.h b/Drivers/CMSIS/Include/core_cm3.h new file mode 100644 index 0000000..8157ca7 --- /dev/null +++ b/Drivers/CMSIS/Include/core_cm3.h @@ -0,0 +1,1937 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 13. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM3_H_GENERIC +#define __CORE_CM3_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M3 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM3 definitions */ +#define __CM3_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16U) | \ + __CM3_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (3U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM3_H_DEPENDANT +#define __CORE_CM3_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM3_REV + #define __CM3_REV 0x0200U + #warning "__CM3_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M3 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#if defined (__CM3_REV) && (__CM3_REV < 0x0201U) /* core r2p1 */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#else +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ +#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +#else + uint32_t RESERVED1[1U]; +#endif +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) +#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ +#endif + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M3 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_cm33.h b/Drivers/CMSIS/Include/core_cm33.h new file mode 100644 index 0000000..7fed59a --- /dev/null +++ b/Drivers/CMSIS/Include/core_cm33.h @@ -0,0 +1,2910 @@ +/**************************************************************************//** + * @file core_cm33.h + * @brief CMSIS Cortex-M33 Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM33_H_GENERIC +#define __CORE_CM33_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M33 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM33 definitions */ +#define __CM33_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM33_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM33_CMSIS_VERSION ((__CM33_CMSIS_VERSION_MAIN << 16U) | \ + __CM33_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (33U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined (__TARGET_FPU_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined (__ARM_FP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined (__ARMVFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined (__TI_VFP_SUPPORT__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined (__FPU_VFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM33_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM33_H_DEPENDANT +#define __CORE_CM33_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM33_REV + #define __CM33_REV 0x0000U + #warning "__CM33_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M33 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM33_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_cm35p.h b/Drivers/CMSIS/Include/core_cm35p.h new file mode 100644 index 0000000..5579c82 --- /dev/null +++ b/Drivers/CMSIS/Include/core_cm35p.h @@ -0,0 +1,2910 @@ +/**************************************************************************//** + * @file core_cm35p.h + * @brief CMSIS Cortex-M35P Core Peripheral Access Layer Header File + * @version V1.0.0 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM35P_H_GENERIC +#define __CORE_CM35P_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M35P + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM35P definitions */ +#define __CM35P_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM35P_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM35P_CMSIS_VERSION ((__CM35P_CMSIS_VERSION_MAIN << 16U) | \ + __CM35P_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (35U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined (__TARGET_FPU_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined (__ARM_FP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined (__ARMVFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined (__TI_VFP_SUPPORT__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined (__FPU_VFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM35P_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM35P_H_DEPENDANT +#define __CORE_CM35P_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM35P_REV + #define __CM35P_REV 0x0000U + #warning "__CM35P_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M35P */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM35P_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_cm4.h b/Drivers/CMSIS/Include/core_cm4.h new file mode 100644 index 0000000..12c023b --- /dev/null +++ b/Drivers/CMSIS/Include/core_cm4.h @@ -0,0 +1,2124 @@ +/**************************************************************************//** + * @file core_cm4.h + * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 13. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM4_H_GENERIC +#define __CORE_CM4_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M4 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM4 definitions */ +#define __CM4_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM4_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16U) | \ + __CM4_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (4U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM4_H_DEPENDANT +#define __CORE_CM4_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM4_REV + #define __CM4_REV 0x0000U + #warning "__CM4_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M4 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and FP Feature Register 2 Definitions */ + +#define FPU_MVFR2_VFP_Misc_Pos 4U /*!< MVFR2: VFP Misc bits Position */ +#define FPU_MVFR2_VFP_Misc_Msk (0xFUL << FPU_MVFR2_VFP_Misc_Pos) /*!< MVFR2: VFP Misc bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ +#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M4 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_cm7.h b/Drivers/CMSIS/Include/core_cm7.h new file mode 100644 index 0000000..c4515d8 --- /dev/null +++ b/Drivers/CMSIS/Include/core_cm7.h @@ -0,0 +1,2725 @@ +/**************************************************************************//** + * @file core_cm7.h + * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File + * @version V5.1.1 + * @date 28. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM7_H_GENERIC +#define __CORE_CM7_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M7 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM7 definitions */ +#define __CM7_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM7_CMSIS_VERSION_SUB ( __CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16U) | \ + __CM7_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (7U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM7_H_DEPENDANT +#define __CORE_CM7_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM7_REV + #define __CM7_REV 0x0000U + #warning "__CM7_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __ICACHE_PRESENT + #define __ICACHE_PRESENT 0U + #warning "__ICACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DCACHE_PRESENT + #define __DCACHE_PRESENT 0U + #warning "__DCACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DTCM_PRESENT + #define __DTCM_PRESENT 0U + #warning "__DTCM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M7 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[1U]; + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED3[93U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: Branch prediction enable bit Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: Instruction cache enable bit Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: Cache enable bit Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */ + +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISDYNADD_Pos 26U /*!< ACTLR: DISDYNADD Position */ +#define SCnSCB_ACTLR_DISDYNADD_Msk (1UL << SCnSCB_ACTLR_DISDYNADD_Pos) /*!< ACTLR: DISDYNADD Mask */ + +#define SCnSCB_ACTLR_DISISSCH1_Pos 21U /*!< ACTLR: DISISSCH1 Position */ +#define SCnSCB_ACTLR_DISISSCH1_Msk (0x1FUL << SCnSCB_ACTLR_DISISSCH1_Pos) /*!< ACTLR: DISISSCH1 Mask */ + +#define SCnSCB_ACTLR_DISDI_Pos 16U /*!< ACTLR: DISDI Position */ +#define SCnSCB_ACTLR_DISDI_Msk (0x1FUL << SCnSCB_ACTLR_DISDI_Pos) /*!< ACTLR: DISDI Mask */ + +#define SCnSCB_ACTLR_DISCRITAXIRUR_Pos 15U /*!< ACTLR: DISCRITAXIRUR Position */ +#define SCnSCB_ACTLR_DISCRITAXIRUR_Msk (1UL << SCnSCB_ACTLR_DISCRITAXIRUR_Pos) /*!< ACTLR: DISCRITAXIRUR Mask */ + +#define SCnSCB_ACTLR_DISBTACALLOC_Pos 14U /*!< ACTLR: DISBTACALLOC Position */ +#define SCnSCB_ACTLR_DISBTACALLOC_Msk (1UL << SCnSCB_ACTLR_DISBTACALLOC_Pos) /*!< ACTLR: DISBTACALLOC Mask */ + +#define SCnSCB_ACTLR_DISBTACREAD_Pos 13U /*!< ACTLR: DISBTACREAD Position */ +#define SCnSCB_ACTLR_DISBTACREAD_Msk (1UL << SCnSCB_ACTLR_DISBTACREAD_Pos) /*!< ACTLR: DISBTACREAD Mask */ + +#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */ +#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ + +#define SCnSCB_ACTLR_DISRAMODE_Pos 11U /*!< ACTLR: DISRAMODE Position */ +#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */ + +#define SCnSCB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */ +#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED3[981U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and FP Feature Register 2 Definitions */ + +#define FPU_MVFR2_VFP_Misc_Pos 4U /*!< MVFR2: VFP Misc bits Position */ +#define FPU_MVFR2_VFP_Misc_Msk (0xFUL << FPU_MVFR2_VFP_Misc_Pos) /*!< MVFR2: VFP Misc bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ +#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = SCB->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## Cache functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_CacheFunctions Cache Functions + \brief Functions that configure Instruction and Data cache. + @{ + */ + +/* Cache Size ID Register Macros */ +#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos) +#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos ) + +#define __SCB_DCACHE_LINE_SIZE 32U /*!< Cortex-M7 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ +#define __SCB_ICACHE_LINE_SIZE 32U /*!< Cortex-M7 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ + +/** + \brief Enable I-Cache + \details Turns on I-Cache + */ +__STATIC_FORCEINLINE void SCB_EnableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if (SCB->CCR & SCB_CCR_IC_Msk) return; /* return if ICache is already enabled */ + + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable I-Cache + \details Turns off I-Cache + */ +__STATIC_FORCEINLINE void SCB_DisableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */ + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate I-Cache + \details Invalidates I-Cache + */ +__STATIC_FORCEINLINE void SCB_InvalidateICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; + __DSB(); + __ISB(); + #endif +} + + +/** + \brief I-Cache Invalidate by address + \details Invalidates I-Cache for the given address. + I-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + I-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address + \param[in] isize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_InvalidateICache_by_Addr (void *addr, int32_t isize) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if ( isize > 0 ) { + int32_t op_size = isize + (((uint32_t)addr) & (__SCB_ICACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_ICACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->ICIMVAU = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_ICACHE_LINE_SIZE; + op_size -= __SCB_ICACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief Enable D-Cache + \details Turns on D-Cache + */ +__STATIC_FORCEINLINE void SCB_EnableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + if (SCB->CCR & SCB_CCR_DC_Msk) return; /* return if DCache is already enabled */ + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + __DSB(); + + SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */ + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable D-Cache + \details Turns off D-Cache + */ +__STATIC_FORCEINLINE void SCB_DisableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate D-Cache + \details Invalidates D-Cache + */ +__STATIC_FORCEINLINE void SCB_InvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean D-Cache + \details Cleans D-Cache + */ +__STATIC_FORCEINLINE void SCB_CleanDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) | + ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean & Invalidate D-Cache + \details Cleans and Invalidates D-Cache + */ +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Invalidate by address + \details Invalidates D-Cache for the given address. + D-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_InvalidateDCache_by_Addr (void *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief D-Cache Clean by address + \details Cleans D-Cache for the given address + D-Cache is cleaned starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned. + \param[in] addr address + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCCMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief D-Cache Clean and Invalidate by address + \details Cleans and invalidates D_Cache for the given address + D-Cache is cleaned and invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned and invalidated. + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + +/*@} end of CMSIS_Core_CacheFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_sc000.h b/Drivers/CMSIS/Include/core_sc000.h new file mode 100644 index 0000000..cf92577 --- /dev/null +++ b/Drivers/CMSIS/Include/core_sc000.h @@ -0,0 +1,1025 @@ +/**************************************************************************//** + * @file core_sc000.h + * @brief CMSIS SC000 Core Peripheral Access Layer Header File + * @version V5.0.6 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC000_H_GENERIC +#define __CORE_SC000_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC000 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS SC000 definitions */ +#define __SC000_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __SC000_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16U) | \ + __SC000_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_SC (000U) /*!< Cortex secure core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC000_H_DEPENDANT +#define __CORE_SC000_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC000_REV + #define __SC000_REV 0x0000U + #warning "__SC000_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC000 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + uint32_t RESERVED1[154U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the SC000 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else +/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for SC000 */ +/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for SC000 */ + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for SC000 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M0 and M0+ do not require the architectural barrier - assume SC000 is the same */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_sc300.h b/Drivers/CMSIS/Include/core_sc300.h new file mode 100644 index 0000000..40f3af8 --- /dev/null +++ b/Drivers/CMSIS/Include/core_sc300.h @@ -0,0 +1,1912 @@ +/**************************************************************************//** + * @file core_sc300.h + * @brief CMSIS SC300 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 31. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC300_H_GENERIC +#define __CORE_SC300_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC3000 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS SC300 definitions */ +#define __SC300_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __SC300_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16U) | \ + __SC300_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_SC (300U) /*!< Cortex secure core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC300_H_DEPENDANT +#define __CORE_SC300_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC300_REV + #define __SC300_REV 0x0000U + #warning "__SC300_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC300 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED1[129U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M3 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/mpu_armv7.h b/Drivers/CMSIS/Include/mpu_armv7.h new file mode 100644 index 0000000..66ef59b --- /dev/null +++ b/Drivers/CMSIS/Include/mpu_armv7.h @@ -0,0 +1,272 @@ +/****************************************************************************** + * @file mpu_armv7.h + * @brief CMSIS MPU API for Armv7-M MPU + * @version V5.1.0 + * @date 08. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2017-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV7_H +#define ARM_MPU_ARMV7_H + +#define ARM_MPU_REGION_SIZE_32B ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes +#define ARM_MPU_REGION_SIZE_64B ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes +#define ARM_MPU_REGION_SIZE_128B ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes +#define ARM_MPU_REGION_SIZE_256B ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes +#define ARM_MPU_REGION_SIZE_512B ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes +#define ARM_MPU_REGION_SIZE_1KB ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte +#define ARM_MPU_REGION_SIZE_2KB ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes +#define ARM_MPU_REGION_SIZE_4KB ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes +#define ARM_MPU_REGION_SIZE_8KB ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes +#define ARM_MPU_REGION_SIZE_16KB ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes +#define ARM_MPU_REGION_SIZE_32KB ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes +#define ARM_MPU_REGION_SIZE_64KB ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes +#define ARM_MPU_REGION_SIZE_128KB ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes +#define ARM_MPU_REGION_SIZE_256KB ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes +#define ARM_MPU_REGION_SIZE_512KB ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes +#define ARM_MPU_REGION_SIZE_1MB ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte +#define ARM_MPU_REGION_SIZE_2MB ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes +#define ARM_MPU_REGION_SIZE_4MB ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes +#define ARM_MPU_REGION_SIZE_8MB ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes +#define ARM_MPU_REGION_SIZE_16MB ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes +#define ARM_MPU_REGION_SIZE_32MB ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes +#define ARM_MPU_REGION_SIZE_64MB ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes +#define ARM_MPU_REGION_SIZE_128MB ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes +#define ARM_MPU_REGION_SIZE_256MB ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes +#define ARM_MPU_REGION_SIZE_512MB ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes +#define ARM_MPU_REGION_SIZE_1GB ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte +#define ARM_MPU_REGION_SIZE_2GB ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes +#define ARM_MPU_REGION_SIZE_4GB ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes + +#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access +#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only +#define ARM_MPU_AP_URO 2U ///!< MPU Access Permission unprivileged access read-only +#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access +#define ARM_MPU_AP_PRO 5U ///!< MPU Access Permission privileged access read-only +#define ARM_MPU_AP_RO 6U ///!< MPU Access Permission read-only access + +/** MPU Region Base Address Register Value +* +* \param Region The region to be configured, number 0 to 15. +* \param BaseAddress The base address for the region. +*/ +#define ARM_MPU_RBAR(Region, BaseAddress) \ + (((BaseAddress) & MPU_RBAR_ADDR_Msk) | \ + ((Region) & MPU_RBAR_REGION_Msk) | \ + (MPU_RBAR_VALID_Msk)) + +/** +* MPU Memory Access Attributes +* +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +*/ +#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable) \ + ((((TypeExtField) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \ + (((IsShareable) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \ + (((IsCacheable) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \ + (((IsBufferable) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk)) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param AccessAttributes Memory access attribution, see \ref ARM_MPU_ACCESS_. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \ + ((((DisableExec) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \ + (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \ + (((AccessAttributes) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk))) | \ + (((SubRegionDisable) << MPU_RASR_SRD_Pos) & MPU_RASR_SRD_Msk) | \ + (((Size) << MPU_RASR_SIZE_Pos) & MPU_RASR_SIZE_Msk) | \ + (((MPU_RASR_ENABLE_Msk)))) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \ + ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size) + +/** +* MPU Memory Access Attribute for strongly ordered memory. +* - TEX: 000b +* - Shareable +* - Non-cacheable +* - Non-bufferable +*/ +#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U) + +/** +* MPU Memory Access Attribute for device memory. +* - TEX: 000b (if shareable) or 010b (if non-shareable) +* - Shareable or non-shareable +* - Non-cacheable +* - Bufferable (if shareable) or non-bufferable (if non-shareable) +* +* \param IsShareable Configures the device memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U)) + +/** +* MPU Memory Access Attribute for normal memory. +* - TEX: 1BBb (reflecting outer cacheability rules) +* - Shareable or non-shareable +* - Cacheable or non-cacheable (reflecting inner cacheability rules) +* - Bufferable or non-bufferable (reflecting inner cacheability rules) +* +* \param OuterCp Configures the outer cache policy. +* \param InnerCp Configures the inner cache policy. +* \param IsShareable Configures the memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) & 2U), ((InnerCp) & 1U)) + +/** +* MPU Memory Access Attribute non-cacheable policy. +*/ +#define ARM_MPU_CACHEP_NOCACHE 0U + +/** +* MPU Memory Access Attribute write-back, write and read allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_WRA 1U + +/** +* MPU Memory Access Attribute write-through, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WT_NWA 2U + +/** +* MPU Memory Access Attribute write-back, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_NWA 3U + + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; //!< The region base address register value (RBAR) + uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + MPU->RNR = rnr; + MPU->RASR = 0U; +} + +/** Configure an MPU region. +* \param rbar Value for RBAR register. +* \param rsar Value for RSAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr) +{ + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rsar Value for RSAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr) +{ + MPU->RNR = rnr; + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Memcopy with strictly ordered memory access, e.g. for register targets. +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + while (cnt > MPU_TYPE_RALIASES) { + ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize); + table += MPU_TYPE_RALIASES; + cnt -= MPU_TYPE_RALIASES; + } + ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize); +} + +#endif diff --git a/Drivers/CMSIS/Include/mpu_armv8.h b/Drivers/CMSIS/Include/mpu_armv8.h new file mode 100644 index 0000000..0041d4d --- /dev/null +++ b/Drivers/CMSIS/Include/mpu_armv8.h @@ -0,0 +1,346 @@ +/****************************************************************************** + * @file mpu_armv8.h + * @brief CMSIS MPU API for Armv8-M and Armv8.1-M MPU + * @version V5.1.0 + * @date 08. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2017-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV8_H +#define ARM_MPU_ARMV8_H + +/** \brief Attribute for device memory (outer only) */ +#define ARM_MPU_ATTR_DEVICE ( 0U ) + +/** \brief Attribute for non-cacheable, normal memory */ +#define ARM_MPU_ATTR_NON_CACHEABLE ( 4U ) + +/** \brief Attribute for normal memory (outer and inner) +* \param NT Non-Transient: Set to 1 for non-transient data. +* \param WB Write-Back: Set to 1 to use write-back update policy. +* \param RA Read Allocation: Set to 1 to use cache allocation on read miss. +* \param WA Write Allocation: Set to 1 to use cache allocation on write miss. +*/ +#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \ + (((NT & 1U) << 3U) | ((WB & 1U) << 2U) | ((RA & 1U) << 1U) | (WA & 1U)) + +/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U) + +/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRE (1U) + +/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGRE (2U) + +/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_GRE (3U) + +/** \brief Memory Attribute +* \param O Outer memory attributes +* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes +*/ +#define ARM_MPU_ATTR(O, I) (((O & 0xFU) << 4U) | (((O & 0xFU) != 0U) ? (I & 0xFU) : ((I & 0x3U) << 2U))) + +/** \brief Normal memory non-shareable */ +#define ARM_MPU_SH_NON (0U) + +/** \brief Normal memory outer shareable */ +#define ARM_MPU_SH_OUTER (2U) + +/** \brief Normal memory inner shareable */ +#define ARM_MPU_SH_INNER (3U) + +/** \brief Memory access permissions +* \param RO Read-Only: Set to 1 for read-only memory. +* \param NP Non-Privileged: Set to 1 for non-privileged memory. +*/ +#define ARM_MPU_AP_(RO, NP) (((RO & 1U) << 1U) | (NP & 1U)) + +/** \brief Region Base Address Register value +* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned. +* \param SH Defines the Shareability domain for this memory region. +* \param RO Read-Only: Set to 1 for a read-only memory region. +* \param NP Non-Privileged: Set to 1 for a non-privileged memory region. +* \oaram XN eXecute Never: Set to 1 for a non-executable memory region. +*/ +#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \ + ((BASE & MPU_RBAR_BASE_Msk) | \ + ((SH << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \ + ((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \ + ((XN << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk)) + +/** \brief Region Limit Address Register value +* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. +* \param IDX The attribute index to be associated with this memory region. +*/ +#define ARM_MPU_RLAR(LIMIT, IDX) \ + ((LIMIT & MPU_RLAR_LIMIT_Msk) | \ + ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (MPU_RLAR_EN_Msk)) + +#if defined(MPU_RLAR_PXN_Pos) + +/** \brief Region Limit Address Register with PXN value +* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. +* \param PXN Privileged execute never. Defines whether code can be executed from this privileged region. +* \param IDX The attribute index to be associated with this memory region. +*/ +#define ARM_MPU_RLAR_PXN(LIMIT, PXN, IDX) \ + ((LIMIT & MPU_RLAR_LIMIT_Msk) | \ + ((PXN << MPU_RLAR_PXN_Pos) & MPU_RLAR_PXN_Msk) | \ + ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (MPU_RLAR_EN_Msk)) + +#endif + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; /*!< Region Base Address Register value */ + uint32_t RLAR; /*!< Region Limit Address Register value */ +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} + +#ifdef MPU_NS +/** Enable the Non-secure MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control) +{ + MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the Non-secure MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable_NS(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU_NS->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} +#endif + +/** Set the memory attribute encoding to the given MPU. +* \param mpu Pointer to the MPU to be configured. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr) +{ + const uint8_t reg = idx / 4U; + const uint32_t pos = ((idx % 4U) * 8U); + const uint32_t mask = 0xFFU << pos; + + if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) { + return; // invalid index + } + + mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask)); +} + +/** Set the memory attribute encoding. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU, idx, attr); +} + +#ifdef MPU_NS +/** Set the memory attribute encoding to the Non-secure MPU. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr); +} +#endif + +/** Clear and disable the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr) +{ + mpu->RNR = rnr; + mpu->RLAR = 0U; +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU, rnr); +} + +#ifdef MPU_NS +/** Clear and disable the given Non-secure MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU_NS, rnr); +} +#endif + +/** Configure the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + mpu->RNR = rnr; + mpu->RBAR = rbar; + mpu->RLAR = rlar; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar); +} + +#ifdef MPU_NS +/** Configure the given Non-secure MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar); +} +#endif + +/** Memcopy with strictly ordered memory access, e.g. for register targets. +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table to the given MPU. +* \param mpu Pointer to the MPU registers to be used. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + if (cnt == 1U) { + mpu->RNR = rnr; + ARM_MPU_OrderedMemcpy(&(mpu->RBAR), &(table->RBAR), rowWordSize); + } else { + uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U); + uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES; + + mpu->RNR = rnrBase; + while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) { + uint32_t c = MPU_TYPE_RALIASES - rnrOffset; + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize); + table += c; + cnt -= c; + rnrOffset = 0U; + rnrBase += MPU_TYPE_RALIASES; + mpu->RNR = rnrBase; + } + + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize); + } +} + +/** Load the given number of MPU regions from a table. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU, rnr, table, cnt); +} + +#ifdef MPU_NS +/** Load the given number of MPU regions from a table to the Non-secure MPU. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt); +} +#endif + +#endif + diff --git a/Drivers/CMSIS/Include/tz_context.h b/Drivers/CMSIS/Include/tz_context.h new file mode 100644 index 0000000..0d09749 --- /dev/null +++ b/Drivers/CMSIS/Include/tz_context.h @@ -0,0 +1,70 @@ +/****************************************************************************** + * @file tz_context.h + * @brief Context Management for Armv8-M TrustZone + * @version V1.0.1 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2017-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef TZ_CONTEXT_H +#define TZ_CONTEXT_H + +#include + +#ifndef TZ_MODULEID_T +#define TZ_MODULEID_T +/// \details Data type that identifies secure software modules called by a process. +typedef uint32_t TZ_ModuleId_t; +#endif + +/// \details TZ Memory ID identifies an allocated memory slot. +typedef uint32_t TZ_MemoryId_t; + +/// Initialize secure context memory system +/// \return execution status (1: success, 0: error) +uint32_t TZ_InitContextSystem_S (void); + +/// Allocate context memory for calling secure software modules in TrustZone +/// \param[in] module identifies software modules called from non-secure mode +/// \return value != 0 id TrustZone memory slot identifier +/// \return value 0 no memory available or internal error +TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module); + +/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id); + +/// Load secure context (called on RTOS thread context switch) +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_LoadContext_S (TZ_MemoryId_t id); + +/// Store secure context (called on RTOS thread context switch) +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_StoreContext_S (TZ_MemoryId_t id); + +#endif // TZ_CONTEXT_H diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/Drivers/STM32G0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h new file mode 100644 index 0000000..4aba5af --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h @@ -0,0 +1,3919 @@ +/** + ****************************************************************************** + * @file stm32_hal_legacy.h + * @author MCD Application Team + * @brief This file contains aliases definition for the STM32Cube HAL constants + * macros and functions maintained for legacy purpose. + ****************************************************************************** + * @attention + * + * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32_HAL_LEGACY +#define STM32_HAL_LEGACY + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose + * @{ + */ +#define AES_FLAG_RDERR CRYP_FLAG_RDERR +#define AES_FLAG_WRERR CRYP_FLAG_WRERR +#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF +#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR +#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR +#if defined(STM32H7) || defined(STM32MP1) +#define CRYP_DATATYPE_32B CRYP_NO_SWAP +#define CRYP_DATATYPE_16B CRYP_HALFWORD_SWAP +#define CRYP_DATATYPE_8B CRYP_BYTE_SWAP +#define CRYP_DATATYPE_1B CRYP_BIT_SWAP +#endif /* STM32H7 || STM32MP1 */ +/** + * @} + */ + +/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose + * @{ + */ +#define ADC_RESOLUTION12b ADC_RESOLUTION_12B +#define ADC_RESOLUTION10b ADC_RESOLUTION_10B +#define ADC_RESOLUTION8b ADC_RESOLUTION_8B +#define ADC_RESOLUTION6b ADC_RESOLUTION_6B +#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN +#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED +#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV +#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV +#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV +#define REGULAR_GROUP ADC_REGULAR_GROUP +#define INJECTED_GROUP ADC_INJECTED_GROUP +#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP +#define AWD_EVENT ADC_AWD_EVENT +#define AWD1_EVENT ADC_AWD1_EVENT +#define AWD2_EVENT ADC_AWD2_EVENT +#define AWD3_EVENT ADC_AWD3_EVENT +#define OVR_EVENT ADC_OVR_EVENT +#define JQOVF_EVENT ADC_JQOVF_EVENT +#define ALL_CHANNELS ADC_ALL_CHANNELS +#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS +#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS +#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR +#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT +#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1 +#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2 +#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4 +#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6 +#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8 +#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO +#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2 +#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO +#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4 +#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO +#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11 +#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1 +#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE +#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING +#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING +#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING +#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5 + +#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY +#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY +#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC +#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC +#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL +#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL +#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1 + +#if defined(STM32H7) +#define ADC_CHANNEL_VBAT_DIV4 ADC_CHANNEL_VBAT +#endif /* STM32H7 */ + + +/** + * @} + */ + +/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose + * @{ + */ +#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE +#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE +#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1 +#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2 +#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3 +#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4 +#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5 +#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6 +#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7 +#if defined(STM32L0) +#define COMP_LPTIMCONNECTION_ENABLED ((uint32_t)0x00000003U) /*!< COMPX output generic naming: connected to LPTIM + input 1 for COMP1, LPTIM input 2 for COMP2 */ +#endif +#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR +#if defined(STM32F373xC) || defined(STM32F378xx) +#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1 +#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR +#endif /* STM32F373xC || STM32F378xx */ + +#if defined(STM32L0) || defined(STM32L4) +#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON + +#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1 +#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2 +#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3 +#define COMP_NONINVERTINGINPUT_IO4 COMP_INPUT_PLUS_IO4 +#define COMP_NONINVERTINGINPUT_IO5 COMP_INPUT_PLUS_IO5 +#define COMP_NONINVERTINGINPUT_IO6 COMP_INPUT_PLUS_IO6 + +#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT +#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT +#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT +#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT +#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1 +#if defined(STM32L0) +/* Issue fixed on STM32L0 COMP driver: only 2 dedicated IO (IO1 and IO2), */ +/* IO2 was wrongly assigned to IO shared with DAC and IO3 was corresponding */ +/* to the second dedicated IO (only for COMP2). */ +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO2 +#else +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3 +#endif +#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4 +#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5 + +#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW +#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH + +/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */ +/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */ +#if defined(COMP_CSR_LOCK) +#define COMP_FLAG_LOCK COMP_CSR_LOCK +#elif defined(COMP_CSR_COMP1LOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK +#elif defined(COMP_CSR_COMPxLOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK +#endif + +#if defined(STM32L4) +#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1 +#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2 +#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2 +#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2 +#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE +#endif + +#if defined(STM32L0) +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER +#else +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED +#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER +#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER +#endif + +#endif + + +/** + * @} + */ + +/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose + * @{ + */ +#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig +/** + * @} + */ + +/** @defgroup CRC_Aliases CRC API aliases + * @{ + */ +#define HAL_CRC_Input_Data_Reverse HAL_CRCEx_Input_Data_Reverse /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for + inter STM32 series compatibility */ +#define HAL_CRC_Output_Data_Reverse HAL_CRCEx_Output_Data_Reverse /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for + inter STM32 series compatibility */ +/** + * @} + */ + +/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE +#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define DAC1_CHANNEL_1 DAC_CHANNEL_1 +#define DAC1_CHANNEL_2 DAC_CHANNEL_2 +#define DAC2_CHANNEL_1 DAC_CHANNEL_1 +#define DAC_WAVE_NONE 0x00000000U +#define DAC_WAVE_NOISE DAC_CR_WAVE1_0 +#define DAC_WAVE_TRIANGLE DAC_CR_WAVE1_1 +#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE +#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE +#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE + +#if defined(STM32G4) || defined(STM32H7) +#define DAC_CHIPCONNECT_DISABLE DAC_CHIPCONNECT_EXTERNAL +#define DAC_CHIPCONNECT_ENABLE DAC_CHIPCONNECT_INTERNAL +#endif + + + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || \ + defined(STM32F4) || defined(STM32G4) +#define HAL_DAC_MSP_INIT_CB_ID HAL_DAC_MSPINIT_CB_ID +#define HAL_DAC_MSP_DEINIT_CB_ID HAL_DAC_MSPDEINIT_CB_ID +#endif + +/** + * @} + */ + +/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2 +#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4 +#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5 +#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4 +#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2 +#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32 +#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6 +#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7 +#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67 +#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67 +#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76 +#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6 +#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7 +#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6 + +#define IS_HAL_REMAPDMA IS_DMA_REMAP +#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE +#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE + +#if defined(STM32L4) + +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI1 HAL_DMAMUX1_REQ_GEN_EXTI1 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI2 HAL_DMAMUX1_REQ_GEN_EXTI2 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI3 HAL_DMAMUX1_REQ_GEN_EXTI3 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI4 HAL_DMAMUX1_REQ_GEN_EXTI4 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI5 HAL_DMAMUX1_REQ_GEN_EXTI5 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI6 HAL_DMAMUX1_REQ_GEN_EXTI6 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI7 HAL_DMAMUX1_REQ_GEN_EXTI7 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI8 HAL_DMAMUX1_REQ_GEN_EXTI8 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI9 HAL_DMAMUX1_REQ_GEN_EXTI9 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI10 HAL_DMAMUX1_REQ_GEN_EXTI10 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI11 HAL_DMAMUX1_REQ_GEN_EXTI11 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI12 HAL_DMAMUX1_REQ_GEN_EXTI12 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI13 HAL_DMAMUX1_REQ_GEN_EXTI13 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI14 HAL_DMAMUX1_REQ_GEN_EXTI14 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI15 HAL_DMAMUX1_REQ_GEN_EXTI15 +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH3_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_DSI_TE HAL_DMAMUX1_REQ_GEN_DSI_TE +#define HAL_DMAMUX1_REQUEST_GEN_DSI_EOT HAL_DMAMUX1_REQ_GEN_DSI_EOT +#define HAL_DMAMUX1_REQUEST_GEN_DMA2D_EOT HAL_DMAMUX1_REQ_GEN_DMA2D_EOT +#define HAL_DMAMUX1_REQUEST_GEN_LTDC_IT HAL_DMAMUX1_REQ_GEN_LTDC_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#if defined(STM32L4R5xx) || defined(STM32L4R9xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || \ + defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define DMA_REQUEST_DCMI_PSSI DMA_REQUEST_DCMI +#endif + +#endif /* STM32L4 */ + +#if defined(STM32G0) +#define DMA_REQUEST_DAC1_CHANNEL1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC1_CHANNEL2 DMA_REQUEST_DAC1_CH2 +#define DMA_REQUEST_TIM16_TRIG_COM DMA_REQUEST_TIM16_COM +#define DMA_REQUEST_TIM17_TRIG_COM DMA_REQUEST_TIM17_COM + +#define LL_DMAMUX_REQ_TIM16_TRIG_COM LL_DMAMUX_REQ_TIM16_COM +#define LL_DMAMUX_REQ_TIM17_TRIG_COM LL_DMAMUX_REQ_TIM17_COM +#endif + +#if defined(STM32H7) + +#define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC2 DMA_REQUEST_DAC1_CH2 + +#define BDMA_REQUEST_LP_UART1_RX BDMA_REQUEST_LPUART1_RX +#define BDMA_REQUEST_LP_UART1_TX BDMA_REQUEST_LPUART1_TX + +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_TIM12_TRGO HAL_DMAMUX1_REQ_GEN_TIM12_TRGO + +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH0_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH1_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH2_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH3_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH4_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH5_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH6_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM4_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM5_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_WKUP HAL_DMAMUX2_REQ_GEN_I2C4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_WKUP HAL_DMAMUX2_REQ_GEN_SPI6_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_COMP1_OUT HAL_DMAMUX2_REQ_GEN_COMP1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_COMP2_OUT HAL_DMAMUX2_REQ_GEN_COMP2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_RTC_WKUP HAL_DMAMUX2_REQ_GEN_RTC_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_EXTI0 HAL_DMAMUX2_REQ_GEN_EXTI0 +#define HAL_DMAMUX2_REQUEST_GEN_EXTI2 HAL_DMAMUX2_REQ_GEN_EXTI2 +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_IT_EVT HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_IT HAL_DMAMUX2_REQ_GEN_SPI6_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_IT HAL_DMAMUX2_REQ_GEN_ADC3_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_AWD1_OUT HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH0_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH1_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#define DFSDM_FILTER_EXT_TRIG_LPTIM1 DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM2 DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM3 DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT + +#define DAC_TRIGGER_LP1_OUT DAC_TRIGGER_LPTIM1_OUT +#define DAC_TRIGGER_LP2_OUT DAC_TRIGGER_LPTIM2_OUT + +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD +#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD +#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS +#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES +#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES +#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE +#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE +#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE +#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE +#define OBEX_PCROP OPTIONBYTE_PCROP +#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG +#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE +#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE +#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE +#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD +#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD +#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE +#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD +#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD +#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE +#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD +#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD +#define PAGESIZE FLASH_PAGE_SIZE +#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD +#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1 +#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2 +#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3 +#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4 +#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST +#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST +#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA +#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB +#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA +#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB +#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE +#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN +#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE +#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN +#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE +#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD +#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP +#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV +#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR +#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA +#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS +#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST +#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR +#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO +#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS +#define OB_WDG_SW OB_IWDG_SW +#define OB_WDG_HW OB_IWDG_HW +#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET +#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET +#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET +#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET +#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR +#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0 +#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1 +#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2 +#if defined(STM32G0) +#define OB_BOOT_LOCK_DISABLE OB_BOOT_ENTRY_FORCED_NONE +#define OB_BOOT_LOCK_ENABLE OB_BOOT_ENTRY_FORCED_FLASH +#else +#define OB_BOOT_ENTRY_FORCED_NONE OB_BOOT_LOCK_DISABLE +#define OB_BOOT_ENTRY_FORCED_FLASH OB_BOOT_LOCK_ENABLE +#endif +#if defined(STM32H7) +#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1 +#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1 +#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1 +#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2 +#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2 +#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2 +#define FLASH_FLAG_WDW FLASH_FLAG_WBNE +#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_JPEG_Aliased_Macros HAL JPEG Aliased Macros maintained for legacy purpose + * @{ + */ + +#if defined(STM32H7) +#define __HAL_RCC_JPEG_CLK_ENABLE __HAL_RCC_JPGDECEN_CLK_ENABLE +#define __HAL_RCC_JPEG_CLK_DISABLE __HAL_RCC_JPGDECEN_CLK_DISABLE +#define __HAL_RCC_JPEG_FORCE_RESET __HAL_RCC_JPGDECRST_FORCE_RESET +#define __HAL_RCC_JPEG_RELEASE_RESET __HAL_RCC_JPGDECRST_RELEASE_RESET +#define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE +#define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose + * @{ + */ + +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1 +#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2 +#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3 +#if defined(STM32G4) + +#define HAL_SYSCFG_EnableIOAnalogSwitchBooster HAL_SYSCFG_EnableIOSwitchBooster +#define HAL_SYSCFG_DisableIOAnalogSwitchBooster HAL_SYSCFG_DisableIOSwitchBooster +#define HAL_SYSCFG_EnableIOAnalogSwitchVDD HAL_SYSCFG_EnableIOSwitchVDD +#define HAL_SYSCFG_DisableIOAnalogSwitchVDD HAL_SYSCFG_DisableIOSwitchVDD +#endif /* STM32G4 */ + + + +/** + * @} + */ + + +/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose + * @{ + */ +#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7) || defined(STM32G4) +#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE +#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE +#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8 +#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16 +#elif defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) +#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE +#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE +#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8 +#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16 +#endif +/** + * @} + */ + +/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef +#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef +/** + * @} + */ + +/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose + * @{ + */ +#define GET_GPIO_SOURCE GPIO_GET_INDEX +#define GET_GPIO_INDEX GPIO_GET_INDEX + +#if defined(STM32F4) +#define GPIO_AF12_SDMMC GPIO_AF12_SDIO +#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO +#endif + +#if defined(STM32F7) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32L4) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32H7) +#define GPIO_AF7_SDIO1 GPIO_AF7_SDMMC1 +#define GPIO_AF8_SDIO1 GPIO_AF8_SDMMC1 +#define GPIO_AF12_SDIO1 GPIO_AF12_SDMMC1 +#define GPIO_AF9_SDIO2 GPIO_AF9_SDMMC2 +#define GPIO_AF10_SDIO2 GPIO_AF10_SDMMC2 +#define GPIO_AF11_SDIO2 GPIO_AF11_SDMMC2 + +#if defined (STM32H743xx) || defined (STM32H753xx) || defined (STM32H750xx) || defined (STM32H742xx) || \ + defined (STM32H745xx) || defined (STM32H755xx) || defined (STM32H747xx) || defined (STM32H757xx) +#define GPIO_AF10_OTG2_HS GPIO_AF10_OTG2_FS +#define GPIO_AF10_OTG1_FS GPIO_AF10_OTG1_HS +#define GPIO_AF12_OTG2_FS GPIO_AF12_OTG1_FS +#endif /*STM32H743xx || STM32H753xx || STM32H750xx || STM32H742xx || STM32H745xx || STM32H755xx || STM32H747xx || \ + STM32H757xx */ +#endif /* STM32H7 */ + +#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1 +#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1 +#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1 + +#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) || defined(STM32WB) +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7 || STM32WB */ + +#if defined(STM32L1) +#define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L1 */ + +#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1) +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH +#endif /* STM32F0 || STM32F3 || STM32F1 */ + +#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1 + +/** + * @} + */ + +/** @defgroup HAL_GTZC_Aliased_Defines HAL GTZC Aliased Defines maintained for legacy purpose + * @{ + */ +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7 + +#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER +#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER +#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD +#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD +#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER +#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER +#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE +#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE + +#if defined(STM32G4) +#define HAL_HRTIM_ExternalEventCounterConfig HAL_HRTIM_ExtEventCounterConfig +#define HAL_HRTIM_ExternalEventCounterEnable HAL_HRTIM_ExtEventCounterEnable +#define HAL_HRTIM_ExternalEventCounterDisable HAL_HRTIM_ExtEventCounterDisable +#define HAL_HRTIM_ExternalEventCounterReset HAL_HRTIM_ExtEventCounterReset +#define HRTIM_TIMEEVENT_A HRTIM_EVENTCOUNTER_A +#define HRTIM_TIMEEVENT_B HRTIM_EVENTCOUNTER_B +#define HRTIM_TIMEEVENTRESETMODE_UNCONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_UNCONDITIONAL +#define HRTIM_TIMEEVENTRESETMODE_CONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_CONDITIONAL +#endif /* STM32G4 */ + +#if defined(STM32H7) +#define HRTIM_OUTPUTSET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 + +#define HRTIM_OUTPUTRESET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 +#endif /* STM32H7 */ + +#if defined(STM32F3) +/** @brief Constants defining available sources associated to external events. + */ +#define HRTIM_EVENTSRC_1 (0x00000000U) +#define HRTIM_EVENTSRC_2 (HRTIM_EECR1_EE1SRC_0) +#define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1) +#define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0) + +/** @brief Constants defining the DLL calibration periods (in micro seconds) + */ +#define HRTIM_CALIBRATIONRATE_7300 0x00000000U +#define HRTIM_CALIBRATIONRATE_910 (HRTIM_DLLCR_CALRTE_0) +#define HRTIM_CALIBRATIONRATE_114 (HRTIM_DLLCR_CALRTE_1) +#define HRTIM_CALIBRATIONRATE_14 (HRTIM_DLLCR_CALRTE_1 | HRTIM_DLLCR_CALRTE_0) + +#endif /* STM32F3 */ +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE +#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE +#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE +#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE +#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE +#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE +#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE +#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE +#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || \ + defined(STM32L1) || defined(STM32F7) +#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX +#endif +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose + * @{ + */ +#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE +#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define KR_KEY_RELOAD IWDG_KEY_RELOAD +#define KR_KEY_ENABLE IWDG_KEY_ENABLE +#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE +#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE +/** + * @} + */ + +/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose + * @{ + */ + +#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION +#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS + +#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING +#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING +#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING + +#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION +#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS + +/* The following 3 definition have also been present in a temporary version of lptim.h */ +/* They need to be renamed also to the right name, just in case */ +#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS + + +/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_LPTIM_ReadCompare HAL_LPTIM_ReadCapturedValue +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b +#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b +#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b +#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b + +#define NAND_AddressTypedef NAND_AddressTypeDef + +#define __ARRAY_ADDRESS ARRAY_ADDRESS +#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE +#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE +#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE +#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE +/** + * @} + */ + +/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose + * @{ + */ +#define NOR_StatusTypedef HAL_NOR_StatusTypeDef +#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS +#define NOR_ONGOING HAL_NOR_STATUS_ONGOING +#define NOR_ERROR HAL_NOR_STATUS_ERROR +#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT + +#define __NOR_WRITE NOR_WRITE +#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT +/** + * @} + */ + +/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose + * @{ + */ + +#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0 +#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1 +#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2 +#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3 + +#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0 +#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1 +#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2 +#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3 + +#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0 +#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO +#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0 +#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1 + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7) || defined(STM32G4) +#define HAL_OPAMP_MSP_INIT_CB_ID HAL_OPAMP_MSPINIT_CB_ID +#define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID +#endif + +#if defined(STM32L4) || defined(STM32L5) +#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALPOWER +#elif defined(STM32G4) +#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALSPEED +#endif + +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS + +#if defined(STM32H7) +#define I2S_IT_TXE I2S_IT_TXP +#define I2S_IT_RXNE I2S_IT_RXP + +#define I2S_FLAG_TXE I2S_FLAG_TXP +#define I2S_FLAG_RXNE I2S_FLAG_RXP +#endif + +#if defined(STM32F7) +#define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL +#endif +/** + * @} + */ + +/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose + * @{ + */ + +/* Compact Flash-ATA registers description */ +#define CF_DATA ATA_DATA +#define CF_SECTOR_COUNT ATA_SECTOR_COUNT +#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER +#define CF_CYLINDER_LOW ATA_CYLINDER_LOW +#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH +#define CF_CARD_HEAD ATA_CARD_HEAD +#define CF_STATUS_CMD ATA_STATUS_CMD +#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE +#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA + +/* Compact Flash-ATA commands */ +#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD +#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD +#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD +#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD + +#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef +#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS +#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING +#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR +#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FORMAT_BIN RTC_FORMAT_BIN +#define FORMAT_BCD RTC_FORMAT_BCD + +#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE +#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE +#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE + +#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE +#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE +#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT +#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT + +#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT +#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2 + +#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE +#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1 +#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1 + +#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT +#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1 +#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1 + + + + +#if defined(STM32F7) +#define RTC_TAMPCR_TAMPXE RTC_TAMPER_ENABLE_BITS_MASK +#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_IT_ENABLE_BITS_MASK +#endif /* STM32F7 */ + +#if defined(STM32H7) +#define RTC_TAMPCR_TAMPXE RTC_TAMPER_X +#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_X_INTERRUPT +#endif /* STM32H7 */ + +#if defined(STM32F7) || defined(STM32H7) || defined(STM32L0) +#define RTC_TAMPER1_INTERRUPT RTC_IT_TAMP1 +#define RTC_TAMPER2_INTERRUPT RTC_IT_TAMP2 +#define RTC_TAMPER3_INTERRUPT RTC_IT_TAMP3 +#define RTC_ALL_TAMPER_INTERRUPT RTC_IT_TAMP +#endif /* STM32F7 || STM32H7 || STM32L0 */ + +/** + * @} + */ + + +/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE +#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE + +#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE +#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE + +#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE +#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE + +#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE +#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE +/** + * @} + */ + + +/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE +#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE +#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE +#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE +#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE +#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE +#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE +#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE +#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE +#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE +#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose + * @{ + */ +#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE +#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE + +#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE +#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE + +#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE +#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE + +#if defined(STM32H7) + +#define SPI_FLAG_TXE SPI_FLAG_TXP +#define SPI_FLAG_RXNE SPI_FLAG_RXP + +#define SPI_IT_TXE SPI_IT_TXP +#define SPI_IT_RXNE SPI_IT_RXP + +#define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET +#define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET +#define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET +#define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET + +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose + * @{ + */ +#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK +#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK + +#define TIM_DMABase_CR1 TIM_DMABASE_CR1 +#define TIM_DMABase_CR2 TIM_DMABASE_CR2 +#define TIM_DMABase_SMCR TIM_DMABASE_SMCR +#define TIM_DMABase_DIER TIM_DMABASE_DIER +#define TIM_DMABase_SR TIM_DMABASE_SR +#define TIM_DMABase_EGR TIM_DMABASE_EGR +#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1 +#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2 +#define TIM_DMABase_CCER TIM_DMABASE_CCER +#define TIM_DMABase_CNT TIM_DMABASE_CNT +#define TIM_DMABase_PSC TIM_DMABASE_PSC +#define TIM_DMABase_ARR TIM_DMABASE_ARR +#define TIM_DMABase_RCR TIM_DMABASE_RCR +#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1 +#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2 +#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3 +#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4 +#define TIM_DMABase_BDTR TIM_DMABASE_BDTR +#define TIM_DMABase_DCR TIM_DMABASE_DCR +#define TIM_DMABase_DMAR TIM_DMABASE_DMAR +#define TIM_DMABase_OR1 TIM_DMABASE_OR1 +#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3 +#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5 +#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6 +#define TIM_DMABase_OR2 TIM_DMABASE_OR2 +#define TIM_DMABase_OR3 TIM_DMABASE_OR3 +#define TIM_DMABase_OR TIM_DMABASE_OR + +#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE +#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1 +#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2 +#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3 +#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4 +#define TIM_EventSource_COM TIM_EVENTSOURCE_COM +#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER +#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK +#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2 + +#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER +#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS +#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS +#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS +#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS +#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS +#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS +#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS +#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS +#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS +#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS +#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS +#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS +#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS +#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS +#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS +#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS +#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS + +#if defined(STM32L0) +#define TIM22_TI1_GPIO1 TIM22_TI1_GPIO +#define TIM22_TI1_GPIO2 TIM22_TI1_GPIO +#endif + +#if defined(STM32F3) +#define IS_TIM_HALL_INTERFACE_INSTANCE IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE +#endif + +#if defined(STM32H7) +#define TIM_TIM1_ETR_COMP1_OUT TIM_TIM1_ETR_COMP1 +#define TIM_TIM1_ETR_COMP2_OUT TIM_TIM1_ETR_COMP2 +#define TIM_TIM8_ETR_COMP1_OUT TIM_TIM8_ETR_COMP1 +#define TIM_TIM8_ETR_COMP2_OUT TIM_TIM8_ETR_COMP2 +#define TIM_TIM2_ETR_COMP1_OUT TIM_TIM2_ETR_COMP1 +#define TIM_TIM2_ETR_COMP2_OUT TIM_TIM2_ETR_COMP2 +#define TIM_TIM3_ETR_COMP1_OUT TIM_TIM3_ETR_COMP1 +#define TIM_TIM1_TI1_COMP1_OUT TIM_TIM1_TI1_COMP1 +#define TIM_TIM8_TI1_COMP2_OUT TIM_TIM8_TI1_COMP2 +#define TIM_TIM2_TI4_COMP1_OUT TIM_TIM2_TI4_COMP1 +#define TIM_TIM2_TI4_COMP2_OUT TIM_TIM2_TI4_COMP2 +#define TIM_TIM2_TI4_COMP1COMP2_OUT TIM_TIM2_TI4_COMP1_COMP2 +#define TIM_TIM3_TI1_COMP1_OUT TIM_TIM3_TI1_COMP1 +#define TIM_TIM3_TI1_COMP2_OUT TIM_TIM3_TI1_COMP2 +#define TIM_TIM3_TI1_COMP1COMP2_OUT TIM_TIM3_TI1_COMP1_COMP2 +#endif + +/** + * @} + */ + +/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose + * @{ + */ +#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING +#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose + * @{ + */ +#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE +#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE + +#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE +#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE + +#define __DIV_SAMPLING16 UART_DIV_SAMPLING16 +#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16 +#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16 +#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16 + +#define __DIV_SAMPLING8 UART_DIV_SAMPLING8 +#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8 +#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8 +#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8 + +#define __DIV_LPUART UART_DIV_LPUART + +#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE +#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose + * @{ + */ + +#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE +#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE + +#define USARTNACK_ENABLED USART_NACK_ENABLE +#define USARTNACK_DISABLED USART_NACK_DISABLE +/** + * @} + */ + +/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define CFR_BASE WWDG_CFR_BASE + +/** + * @} + */ + +/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose + * @{ + */ +#define CAN_FilterFIFO0 CAN_FILTER_FIFO0 +#define CAN_FilterFIFO1 CAN_FILTER_FIFO1 +#define CAN_IT_RQCP0 CAN_IT_TME +#define CAN_IT_RQCP1 CAN_IT_TME +#define CAN_IT_RQCP2 CAN_IT_TME +#define INAK_TIMEOUT CAN_TIMEOUT_VALUE +#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE +#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U) +#define CAN_TXSTATUS_OK ((uint8_t)0x01U) +#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U) + +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define VLAN_TAG ETH_VLAN_TAG +#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD +#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD +#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD +#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK +#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK +#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK +#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK + +#define ETH_MMCCR 0x00000100U +#define ETH_MMCRIR 0x00000104U +#define ETH_MMCTIR 0x00000108U +#define ETH_MMCRIMR 0x0000010CU +#define ETH_MMCTIMR 0x00000110U +#define ETH_MMCTGFSCCR 0x0000014CU +#define ETH_MMCTGFMSCCR 0x00000150U +#define ETH_MMCTGFCR 0x00000168U +#define ETH_MMCRFCECR 0x00000194U +#define ETH_MMCRFAECR 0x00000198U +#define ETH_MMCRGUFCR 0x000001C4U + +#define ETH_MAC_TXFIFO_FULL 0x02000000U /* Tx FIFO full */ +#define ETH_MAC_TXFIFONOT_EMPTY 0x01000000U /* Tx FIFO not empty */ +#define ETH_MAC_TXFIFO_WRITE_ACTIVE 0x00400000U /* Tx FIFO write active */ +#define ETH_MAC_TXFIFO_IDLE 0x00000000U /* Tx FIFO read status: Idle */ +#define ETH_MAC_TXFIFO_READ 0x00100000U /* Tx FIFO read status: Read (transferring data to + the MAC transmitter) */ +#define ETH_MAC_TXFIFO_WAITING 0x00200000U /* Tx FIFO read status: Waiting for TxStatus from + MAC transmitter */ +#define ETH_MAC_TXFIFO_WRITING 0x00300000U /* Tx FIFO read status: Writing the received TxStatus + or flushing the TxFIFO */ +#define ETH_MAC_TRANSMISSION_PAUSE 0x00080000U /* MAC transmitter in pause */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE 0x00000000U /* MAC transmit frame controller: Idle */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING 0x00020000U /* MAC transmit frame controller: Waiting for Status + of previous frame or IFG/backoff period to be over */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF 0x00040000U /* MAC transmit frame controller: Generating and + transmitting a Pause control frame (in full duplex mode) */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING 0x00060000U /* MAC transmit frame controller: Transferring input + frame for transmission */ +#define ETH_MAC_MII_TRANSMIT_ACTIVE 0x00010000U /* MAC MII transmit engine active */ +#define ETH_MAC_RXFIFO_EMPTY 0x00000000U /* Rx FIFO fill level: empty */ +#define ETH_MAC_RXFIFO_BELOW_THRESHOLD 0x00000100U /* Rx FIFO fill level: fill-level below flow-control + de-activate threshold */ +#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD 0x00000200U /* Rx FIFO fill level: fill-level above flow-control + activate threshold */ +#define ETH_MAC_RXFIFO_FULL 0x00000300U /* Rx FIFO fill level: full */ +#if defined(STM32F1) +#else +#define ETH_MAC_READCONTROLLER_IDLE 0x00000000U /* Rx FIFO read controller IDLE state */ +#define ETH_MAC_READCONTROLLER_READING_DATA 0x00000020U /* Rx FIFO read controller Reading frame data */ +#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U /* Rx FIFO read controller Reading frame status + (or time-stamp) */ +#endif +#define ETH_MAC_READCONTROLLER_FLUSHING 0x00000060U /* Rx FIFO read controller Flushing the frame data and + status */ +#define ETH_MAC_RXFIFO_WRITE_ACTIVE 0x00000010U /* Rx FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_NOTACTIVE 0x00000000U /* MAC small FIFO read / write controllers not active */ +#define ETH_MAC_SMALL_FIFO_READ_ACTIVE 0x00000002U /* MAC small FIFO read controller active */ +#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE 0x00000004U /* MAC small FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_RW_ACTIVE 0x00000006U /* MAC small FIFO read / write controllers active */ +#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE 0x00000001U /* MAC MII receive protocol engine active */ + +#define ETH_TxPacketConfig ETH_TxPacketConfig_t /* Transmit Packet Configuration structure definition */ + +/** + * @} + */ + +/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR +#define DCMI_IT_OVF DCMI_IT_OVR +#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI +#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI + +#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop +#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop +#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop + +/** + * @} + */ + +#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \ + || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \ + || defined(STM32H7) +/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose + * @{ + */ +#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888 +#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888 +#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565 +#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555 +#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444 + +#define CM_ARGB8888 DMA2D_INPUT_ARGB8888 +#define CM_RGB888 DMA2D_INPUT_RGB888 +#define CM_RGB565 DMA2D_INPUT_RGB565 +#define CM_ARGB1555 DMA2D_INPUT_ARGB1555 +#define CM_ARGB4444 DMA2D_INPUT_ARGB4444 +#define CM_L8 DMA2D_INPUT_L8 +#define CM_AL44 DMA2D_INPUT_AL44 +#define CM_AL88 DMA2D_INPUT_AL88 +#define CM_L4 DMA2D_INPUT_L4 +#define CM_A8 DMA2D_INPUT_A8 +#define CM_A4 DMA2D_INPUT_A4 +/** + * @} + */ +#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 */ + +#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32H7) +/** @defgroup DMA2D_Aliases DMA2D API Aliases + * @{ + */ +#define HAL_DMA2D_DisableCLUT HAL_DMA2D_CLUTLoading_Abort /*!< Aliased to HAL_DMA2D_CLUTLoading_Abort + for compatibility with legacy code */ +/** + * @} + */ + +#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 */ + +/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback +/** + * @} + */ + +/** @defgroup HAL_DCACHE_Aliased_Functions HAL DCACHE Aliased Functions maintained for legacy purpose + * @{ + */ + + +/** + * @} + */ + +#if !defined(STM32F2) +/** @defgroup HASH_alias HASH API alias + * @{ + */ +#define HAL_HASHEx_IRQHandler HAL_HASH_IRQHandler /*!< Redirection for compatibility with legacy code */ +/** + * + * @} + */ +#endif /* STM32F2 */ +/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef +#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef +#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish +#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish +#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish +#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish + +/*HASH Algorithm Selection*/ + +#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1 +#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224 +#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256 +#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5 + +#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH +#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC + +#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY +#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY + +#if defined(STM32L4) || defined(STM32L5) || defined(STM32F2) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7) + +#define HAL_HASH_MD5_Accumulate HAL_HASH_MD5_Accmlt +#define HAL_HASH_MD5_Accumulate_End HAL_HASH_MD5_Accmlt_End +#define HAL_HASH_MD5_Accumulate_IT HAL_HASH_MD5_Accmlt_IT +#define HAL_HASH_MD5_Accumulate_End_IT HAL_HASH_MD5_Accmlt_End_IT + +#define HAL_HASH_SHA1_Accumulate HAL_HASH_SHA1_Accmlt +#define HAL_HASH_SHA1_Accumulate_End HAL_HASH_SHA1_Accmlt_End +#define HAL_HASH_SHA1_Accumulate_IT HAL_HASH_SHA1_Accmlt_IT +#define HAL_HASH_SHA1_Accumulate_End_IT HAL_HASH_SHA1_Accmlt_End_IT + +#define HAL_HASHEx_SHA224_Accumulate HAL_HASHEx_SHA224_Accmlt +#define HAL_HASHEx_SHA224_Accumulate_End HAL_HASHEx_SHA224_Accmlt_End +#define HAL_HASHEx_SHA224_Accumulate_IT HAL_HASHEx_SHA224_Accmlt_IT +#define HAL_HASHEx_SHA224_Accumulate_End_IT HAL_HASHEx_SHA224_Accmlt_End_IT + +#define HAL_HASHEx_SHA256_Accumulate HAL_HASHEx_SHA256_Accmlt +#define HAL_HASHEx_SHA256_Accumulate_End HAL_HASHEx_SHA256_Accmlt_End +#define HAL_HASHEx_SHA256_Accumulate_IT HAL_HASHEx_SHA256_Accmlt_IT +#define HAL_HASHEx_SHA256_Accumulate_End_IT HAL_HASHEx_SHA256_Accmlt_End_IT + +#endif /* STM32L4 || STM32L5 || STM32F2 || STM32F4 || STM32F7 || STM32H7 */ +/** + * @} + */ + +/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode +#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode +#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode +#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode +#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode +#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode +#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd\ + )==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : \ + HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) +#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect +#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT()) +#if defined(STM32L0) +#else +#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT()) +#endif +#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT()) +#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd\ + )==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : \ + HAL_ADCEx_DisableVREFINTTempSensor()) +#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || \ + defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ) +#define HAL_EnableSRDomainDBGStopMode HAL_EnableDomain3DBGStopMode +#define HAL_DisableSRDomainDBGStopMode HAL_DisableDomain3DBGStopMode +#define HAL_EnableSRDomainDBGStandbyMode HAL_EnableDomain3DBGStandbyMode +#define HAL_DisableSRDomainDBGStandbyMode HAL_DisableDomain3DBGStandbyMode +#endif /* STM32H7A3xx || STM32H7B3xx || STM32H7B0xx || STM32H7A3xxQ || STM32H7B3xxQ || STM32H7B0xxQ */ + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram +#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown +#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown +#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock +#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock +#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase +#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program + +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter +#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter +#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter +#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter + +#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) ((cmd == ENABLE)? \ + HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): \ + HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) + +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || \ + defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || \ + defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT +#define HAL_I2C_Master_Sequential_Receive_IT HAL_I2C_Master_Seq_Receive_IT +#define HAL_I2C_Slave_Sequential_Transmit_IT HAL_I2C_Slave_Seq_Transmit_IT +#define HAL_I2C_Slave_Sequential_Receive_IT HAL_I2C_Slave_Seq_Receive_IT +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || + STM32L4 || STM32L5 || STM32G4 || STM32L1 */ +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || \ + defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)|| defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA +#define HAL_I2C_Master_Sequential_Receive_DMA HAL_I2C_Master_Seq_Receive_DMA +#define HAL_I2C_Slave_Sequential_Transmit_DMA HAL_I2C_Slave_Seq_Transmit_DMA +#define HAL_I2C_Slave_Sequential_Receive_DMA HAL_I2C_Slave_Seq_Receive_DMA +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ + +#if defined(STM32F4) +#define HAL_FMPI2C_Master_Sequential_Transmit_IT HAL_FMPI2C_Master_Seq_Transmit_IT +#define HAL_FMPI2C_Master_Sequential_Receive_IT HAL_FMPI2C_Master_Seq_Receive_IT +#define HAL_FMPI2C_Slave_Sequential_Transmit_IT HAL_FMPI2C_Slave_Seq_Transmit_IT +#define HAL_FMPI2C_Slave_Sequential_Receive_IT HAL_FMPI2C_Slave_Seq_Receive_IT +#define HAL_FMPI2C_Master_Sequential_Transmit_DMA HAL_FMPI2C_Master_Seq_Transmit_DMA +#define HAL_FMPI2C_Master_Sequential_Receive_DMA HAL_FMPI2C_Master_Seq_Receive_DMA +#define HAL_FMPI2C_Slave_Sequential_Transmit_DMA HAL_FMPI2C_Slave_Seq_Transmit_DMA +#define HAL_FMPI2C_Slave_Sequential_Receive_DMA HAL_FMPI2C_Slave_Seq_Receive_DMA +#endif /* STM32F4 */ +/** + * @} + */ + +/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose + * @{ + */ + +#if defined(STM32G0) +#define HAL_PWR_ConfigPVD HAL_PWREx_ConfigPVD +#define HAL_PWR_EnablePVD HAL_PWREx_EnablePVD +#define HAL_PWR_DisablePVD HAL_PWREx_DisablePVD +#define HAL_PWR_PVD_IRQHandler HAL_PWREx_PVD_IRQHandler +#endif +#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD +#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg +#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown +#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor +#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg +#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown +#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor +#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler +#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD +#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler +#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback +#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive +#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive +#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC +#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC +#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM + +#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL +#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING +#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING +#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING +#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING +#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING +#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING + +#define CR_OFFSET_BB PWR_CR_OFFSET_BB +#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB +#define PMODE_BIT_NUMBER VOS_BIT_NUMBER +#define CR_PMODE_BB CR_VOS_BB + +#define DBP_BitNumber DBP_BIT_NUMBER +#define PVDE_BitNumber PVDE_BIT_NUMBER +#define PMODE_BitNumber PMODE_BIT_NUMBER +#define EWUP_BitNumber EWUP_BIT_NUMBER +#define FPDS_BitNumber FPDS_BIT_NUMBER +#define ODEN_BitNumber ODEN_BIT_NUMBER +#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER +#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER +#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER +#define BRE_BitNumber BRE_BIT_NUMBER + +#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL + + +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Functions HAL RTC Aliased Functions maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT +#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback +#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt +#define HAL_TIM_DMAError TIM_DMAError +#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt +#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt +#if defined(STM32H7) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || \ + defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) +#define HAL_TIM_SlaveConfigSynchronization HAL_TIM_SlaveConfigSynchro +#define HAL_TIM_SlaveConfigSynchronization_IT HAL_TIM_SlaveConfigSynchro_IT +#define HAL_TIMEx_CommutationCallback HAL_TIMEx_CommutCallback +#define HAL_TIMEx_ConfigCommutationEvent HAL_TIMEx_ConfigCommutEvent +#define HAL_TIMEx_ConfigCommutationEvent_IT HAL_TIMEx_ConfigCommutEvent_IT +#define HAL_TIMEx_ConfigCommutationEvent_DMA HAL_TIMEx_ConfigCommutEvent_DMA +#endif /* STM32H7 || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 */ +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback +#define HAL_LTDC_Relaod HAL_LTDC_Reload +#define HAL_LTDC_StructInitFromVideoConfig HAL_LTDCEx_StructInitFromVideoConfig +#define HAL_LTDC_StructInitFromAdaptedCommandConfig HAL_LTDCEx_StructInitFromAdaptedCommandConfig +/** + * @} + */ + + +/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported macros ------------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose + * @{ + */ +#define AES_IT_CC CRYP_IT_CC +#define AES_IT_ERR CRYP_IT_ERR +#define AES_FLAG_CCF CRYP_FLAG_CCF +/** + * @} + */ + +/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE +#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH +#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH +#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM +#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC +#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM +#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC +#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI +#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK +#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG +#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG +#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE +#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE +#define __HAL_SYSCFG_SRAM2_WRP_ENABLE __HAL_SYSCFG_SRAM2_WRP_0_31_ENABLE + +#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY +#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48 +#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS +#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER +#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER + +/** + * @} + */ + + +/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __ADC_ENABLE __HAL_ADC_ENABLE +#define __ADC_DISABLE __HAL_ADC_DISABLE +#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS +#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS +#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE +#define __ADC_IS_ENABLED ADC_IS_ENABLE +#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR +#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR +#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING +#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE + +#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION +#define __HAL_ADC_JSQR_RK ADC_JSQR_RK +#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT +#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR +#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION +#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE +#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS +#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM +#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT +#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS +#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN +#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ +#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET +#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET +#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL +#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL +#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET +#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET +#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD + +#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION +#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER +#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI +#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER +#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER +#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE + +#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT +#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT +#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL +#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM +#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET +#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE +#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE +#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER + +#define __HAL_ADC_SQR1 ADC_SQR1 +#define __HAL_ADC_SMPR1 ADC_SMPR1 +#define __HAL_ADC_SMPR2 ADC_SMPR2 +#define __HAL_ADC_SQR3_RK ADC_SQR3_RK +#define __HAL_ADC_SQR2_RK ADC_SQR2_RK +#define __HAL_ADC_SQR1_RK ADC_SQR1_RK +#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS +#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS +#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV +#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection +#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq +#define __HAL_ADC_JSQR ADC_JSQR + +#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL +#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF +#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT +#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS +#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN +#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR +#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT +#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT +#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT +#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE + +/** + * @} + */ + +/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1 +#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1 +#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2 +#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2 +#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3 +#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3 +#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4 +#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4 +#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5 +#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5 +#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6 +#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6 +#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7 +#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7 +#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8 +#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8 + +#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9 +#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9 +#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10 +#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10 +#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11 +#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11 +#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12 +#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12 +#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13 +#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13 +#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14 +#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14 +#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2 +#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2 + + +#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15 +#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15 +#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16 +#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16 +#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17 +#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17 +#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC +#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC +#if defined(STM32H7) +#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1 +#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1 +#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1 +#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1 +#else +#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG +#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG +#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG +#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG +#endif /* STM32H7 */ +#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT +#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT +#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT +#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT +#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT +#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT +#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1 +#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1 +#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1 +#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1 +#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2 +#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2 + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32F3) +#define COMP_START __HAL_COMP_ENABLE +#define COMP_STOP __HAL_COMP_DISABLE +#define COMP_LOCK __HAL_COMP_LOCK + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || \ + defined(STM32F334x8) || defined(STM32F328xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F302xE) || defined(STM32F302xC) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP7_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP7_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F373xC) ||defined(STM32F378xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +# endif +#else +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +#endif + +#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE + +#if defined(STM32L0) || defined(STM32L4) +/* Note: On these STM32 families, the only argument of this macro */ +/* is COMP_FLAG_LOCK. */ +/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */ +/* argument. */ +#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__)) +#endif +/** + * @} + */ + +#if defined(STM32L0) || defined(STM32L4) +/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is + done into HAL_COMP_Init() */ +#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is + done into HAL_COMP_Init() */ +/** + * @} + */ +#endif + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \ + ((WAVE) == DAC_WAVE_NOISE)|| \ + ((WAVE) == DAC_WAVE_TRIANGLE)) + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_WRPAREA IS_OB_WRPAREA +#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM +#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM +#define IS_TYPEERASE IS_FLASH_TYPEERASE +#define IS_NBSECTORS IS_FLASH_NBSECTORS +#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE + +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2 +#define __HAL_I2C_GENERATE_START I2C_GENERATE_START +#if defined(STM32F1) +#define __HAL_I2C_FREQ_RANGE I2C_FREQRANGE +#else +#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE +#endif /* STM32F1 */ +#define __HAL_I2C_RISE_TIME I2C_RISE_TIME +#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD +#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST +#define __HAL_I2C_SPEED I2C_SPEED +#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE +#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ +#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS +#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE +#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ +#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB +#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB +#define __HAL_I2C_FREQRANGE I2C_FREQRANGE +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE +#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT + +#if defined(STM32H7) +#define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG +#endif + +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __IRDA_DISABLE __HAL_IRDA_DISABLE +#define __IRDA_ENABLE __HAL_IRDA_ENABLE + +#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION +#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION + +#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE + + +/** + * @} + */ + + +/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS +#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS +/** + * @} + */ + + +/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT +#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT +#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE + +/** + * @} + */ + + +/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose + * @{ + */ +#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD +#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX +#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX +#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX +#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX +#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L +#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H +#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM +#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES +#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX +#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT +#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION +#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET + +/** + * @} + */ + + +/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE +#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE +#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine +#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig +#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) +#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2(); \ + HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); \ + } while(0) +#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2(); \ + HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); \ + } while(0) +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention +#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2 +#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2 +#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB +#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB + +#if defined (STM32F4) +#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT() +#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT() +#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG() +#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG() +#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT() +#else +#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG +#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT +#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT +#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT +#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG +#endif /* STM32F4 */ +/** + * @} + */ + + +/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose + * @{ + */ + +#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI +#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI + +#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback +#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? \ + HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) + +#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE +#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE +#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE +#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE +#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET +#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET +#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE +#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE +#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET +#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET +#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE +#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE +#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE +#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE +#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET +#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET +#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE +#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE +#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET +#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET +#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE +#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE +#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE +#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE +#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET +#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET +#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE +#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE +#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET +#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET +#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET +#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET +#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET +#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET +#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET +#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET +#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET +#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET +#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET +#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET +#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET +#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET +#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE +#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE +#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET +#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET +#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE +#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE +#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE +#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE +#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET +#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET +#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE +#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE +#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE +#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE +#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET +#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET +#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE +#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE +#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET +#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET +#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE +#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE +#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE +#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE +#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET +#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET +#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE +#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE +#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET +#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET +#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE +#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE +#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE +#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE +#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET +#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET +#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE +#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE +#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET +#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET +#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE +#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE +#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE +#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE +#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET +#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET +#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE +#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE +#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE +#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE +#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET +#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET +#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE +#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE +#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE +#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE +#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET +#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET +#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE +#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE +#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET +#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET +#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE +#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE +#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE +#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE +#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE +#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE +#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE +#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE +#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE +#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE +#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET +#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET +#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE +#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE +#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET +#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET +#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE +#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE +#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE +#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE +#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE +#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE +#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET +#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET +#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE +#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE +#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE +#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE +#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE +#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE +#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET +#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET +#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE +#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE +#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE +#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE +#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET +#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET +#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE +#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE +#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE +#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE +#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET +#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET +#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE +#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE +#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE +#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE +#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET +#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET +#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE +#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE +#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE +#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE +#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET +#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET +#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE +#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE +#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE +#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE +#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET +#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET +#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE +#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE +#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE +#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE +#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET +#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET +#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE +#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE +#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE +#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE +#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET +#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET +#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE +#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE +#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE +#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE +#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET +#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET +#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE +#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE +#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE +#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE +#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET +#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET +#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE +#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE +#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE +#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE +#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET +#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET +#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE +#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE +#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE +#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE +#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET +#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET +#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE +#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE +#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE +#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE +#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET +#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET +#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE +#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE +#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE +#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE +#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET +#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET +#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE +#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE +#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE +#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE +#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET +#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET +#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE +#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE +#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE +#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE +#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET +#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET +#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE +#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE +#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE +#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE +#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET +#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET +#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE +#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE +#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE +#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE +#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET +#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET +#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE +#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE +#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE +#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE +#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET +#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET + +#if defined(STM32WB) +#define __HAL_RCC_QSPI_CLK_DISABLE __HAL_RCC_QUADSPI_CLK_DISABLE +#define __HAL_RCC_QSPI_CLK_ENABLE __HAL_RCC_QUADSPI_CLK_ENABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QUADSPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QUADSPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_QSPI_FORCE_RESET __HAL_RCC_QUADSPI_FORCE_RESET +#define __HAL_RCC_QSPI_RELEASE_RESET __HAL_RCC_QUADSPI_RELEASE_RESET +#define __HAL_RCC_QSPI_IS_CLK_ENABLED __HAL_RCC_QUADSPI_IS_CLK_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_DISABLED __HAL_RCC_QUADSPI_IS_CLK_DISABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_DISABLED +#define QSPI_IRQHandler QUADSPI_IRQHandler +#endif /* __HAL_RCC_QUADSPI_CLK_ENABLE */ + +#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE +#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE +#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE +#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE +#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET +#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET +#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE +#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE +#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE +#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE +#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET +#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET +#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE +#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE +#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE +#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE +#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET +#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET +#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE +#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE +#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE +#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE +#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET +#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET +#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE +#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE +#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE +#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE +#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET +#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET +#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE +#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE +#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE +#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE +#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET +#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET +#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE +#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE +#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE +#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE +#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET +#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET +#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE +#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE +#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE +#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE +#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE +#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE +#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE +#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE +#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE +#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE +#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET +#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET +#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE +#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE +#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE +#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE +#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET +#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET +#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE +#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE +#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE +#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE +#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET +#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET +#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE +#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE +#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET +#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET +#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE +#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE +#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET +#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET +#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE +#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE +#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET +#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET +#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE +#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE +#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET +#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET +#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE +#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE +#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET +#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET +#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE +#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE +#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE +#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE +#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET +#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET +#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE +#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE +#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE +#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE +#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET +#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET +#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE +#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE +#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE +#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE +#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET +#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET +#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE +#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE +#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE +#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE +#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET +#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET +#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE +#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE +#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE +#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE +#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET +#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET +#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE +#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE +#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE +#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE +#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET +#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET +#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE +#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE +#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE +#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE +#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET +#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET +#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE +#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE +#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE +#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE +#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET +#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET +#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE +#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE +#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE +#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE +#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET +#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET +#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE +#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE +#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE +#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE +#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET +#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET +#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE +#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE +#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET +#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET +#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE +#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE +#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE +#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE +#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET +#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET +#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE +#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE +#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE +#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE +#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET +#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET +#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE +#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE +#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE +#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE +#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET +#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET +#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE +#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE +#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE +#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE +#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET +#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET +#define __USART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __USART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __USART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __USART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __USART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __USART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __USART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __USART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __USART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __USART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __USART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __USART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __USART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __USART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __USART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE +#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE +#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET +#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE +#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE +#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE +#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE +#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET + +#if defined(STM32H7) +#define __HAL_RCC_WWDG_CLK_DISABLE __HAL_RCC_WWDG1_CLK_DISABLE +#define __HAL_RCC_WWDG_CLK_ENABLE __HAL_RCC_WWDG1_CLK_ENABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG1_CLK_SLEEP_DISABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG1_CLK_SLEEP_ENABLE + +#define __HAL_RCC_WWDG_FORCE_RESET ((void)0U) /* Not available on the STM32H7*/ +#define __HAL_RCC_WWDG_RELEASE_RESET ((void)0U) /* Not available on the STM32H7*/ + + +#define __HAL_RCC_WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG1_IS_CLK_ENABLED +#define __HAL_RCC_WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG1_IS_CLK_DISABLED +#define RCC_SPI4CLKSOURCE_D2PCLK1 RCC_SPI4CLKSOURCE_D2PCLK2 +#define RCC_SPI5CLKSOURCE_D2PCLK1 RCC_SPI5CLKSOURCE_D2PCLK2 +#define RCC_SPI45CLKSOURCE_D2PCLK1 RCC_SPI45CLKSOURCE_D2PCLK2 +#define RCC_SPI45CLKSOURCE_CDPCLK1 RCC_SPI45CLKSOURCE_CDPCLK2 +#define RCC_SPI45CLKSOURCE_PCLK1 RCC_SPI45CLKSOURCE_PCLK2 +#endif + +#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE +#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE +#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE +#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE +#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET +#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET + +#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE +#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE +#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET +#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET +#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE +#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE +#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE +#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE +#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET +#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET +#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE +#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE +#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE +#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE +#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE +#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE +#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET +#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET +#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE +#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE + +#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET +#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE +#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE +#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE +#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE +#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE +#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE +#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE +#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE +#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE +#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE +#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE +#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE +#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE +#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET +#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET +#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE +#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE +#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE +#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE +#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE +#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET +#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET +#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE +#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE +#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE +#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE +#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET +#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET +#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE +#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE +#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE +#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE +#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET +#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET +#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE +#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE +#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE +#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE +#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE +#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE +#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE +#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE +#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE +#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE +#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE +#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE +#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE +#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE +#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE +#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE +#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE +#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE +#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE +#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET +#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET +#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE +#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE +#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE +#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE +#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET +#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET +#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE +#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE +#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE +#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE +#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET +#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET +#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE +#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE +#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE +#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE +#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET +#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET +#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE +#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE +#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE +#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE +#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET +#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE +#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE +#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE +#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE +#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE +#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE +#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET +#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET +#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE +#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE +#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE +#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE +#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE +#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE +#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED +#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED +#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE +#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE +#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE +#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE +#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE +#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE +#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE +#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET +#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET +#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE +#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE +#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE +#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE +#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET +#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET +#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE + +/* alias define maintained for legacy */ +#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET + +#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE +#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE +#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE +#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE +#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE +#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE +#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE +#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE +#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE +#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE +#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE +#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE +#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE +#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE +#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE +#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE +#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE +#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE +#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE +#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE + +#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET +#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET +#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET +#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET +#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET +#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET +#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET +#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET +#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET +#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET +#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET +#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET +#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET +#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET +#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET +#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET +#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET +#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET +#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET +#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET + +#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED +#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED +#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED +#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED +#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED +#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED +#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED +#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED +#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED +#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED +#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED +#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED +#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED +#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED +#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED +#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED +#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED +#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED +#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED +#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED +#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED +#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED +#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED +#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED +#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED +#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED +#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED +#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED +#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED +#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED +#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED +#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED +#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED +#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED +#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED +#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED +#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED +#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED +#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED +#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED +#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED +#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED +#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED +#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED +#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED +#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED +#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED +#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED +#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED +#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED +#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED +#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED +#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED +#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED +#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED +#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED +#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED +#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED +#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED +#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED +#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED +#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED +#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED +#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED +#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED +#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED +#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED +#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED +#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED +#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED +#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED +#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED +#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED +#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED +#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED +#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED +#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED +#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED +#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED +#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED +#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED +#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED +#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED +#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED +#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED +#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED +#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED +#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED +#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED +#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED +#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED +#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED +#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED +#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED +#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED +#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED +#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED +#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED +#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED +#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED +#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED +#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED +#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED +#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED +#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED +#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED +#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED +#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED +#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED +#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED +#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED +#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED +#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED +#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED +#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED +#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED + +#if defined(STM32L1) +#define __HAL_RCC_CRYP_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __HAL_RCC_CRYP_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __HAL_RCC_CRYP_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __HAL_RCC_CRYP_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#endif /* STM32L1 */ + +#if defined(STM32F4) +#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED +#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED +#define Sdmmc1ClockSelection SdioClockSelection +#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO +#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48 +#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK +#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG +#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET +#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET +#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE +#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE +#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED +#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED +#define SdioClockSelection Sdmmc1ClockSelection +#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1 +#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG +#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE +#endif + +#if defined(STM32F7) +#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48 +#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK +#endif + +#if defined(STM32H7) +#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() __HAL_RCC_USB1_OTG_HS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() __HAL_RCC_USB1_OTG_HS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE() + +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() __HAL_RCC_USB2_OTG_FS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() __HAL_RCC_USB2_OTG_FS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE() +#endif + +#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG +#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG + +#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE + +#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE +#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE +#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK +#define IS_RCC_HCLK_DIV IS_RCC_PCLK +#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK + +#define RCC_IT_HSI14 RCC_IT_HSI14RDY + +#define RCC_IT_CSSLSE RCC_IT_LSECSS +#define RCC_IT_CSSHSE RCC_IT_CSS + +#define RCC_PLLMUL_3 RCC_PLL_MUL3 +#define RCC_PLLMUL_4 RCC_PLL_MUL4 +#define RCC_PLLMUL_6 RCC_PLL_MUL6 +#define RCC_PLLMUL_8 RCC_PLL_MUL8 +#define RCC_PLLMUL_12 RCC_PLL_MUL12 +#define RCC_PLLMUL_16 RCC_PLL_MUL16 +#define RCC_PLLMUL_24 RCC_PLL_MUL24 +#define RCC_PLLMUL_32 RCC_PLL_MUL32 +#define RCC_PLLMUL_48 RCC_PLL_MUL48 + +#define RCC_PLLDIV_2 RCC_PLL_DIV2 +#define RCC_PLLDIV_3 RCC_PLL_DIV3 +#define RCC_PLLDIV_4 RCC_PLL_DIV4 + +#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE +#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG +#define RCC_MCO_NODIV RCC_MCODIV_1 +#define RCC_MCO_DIV1 RCC_MCODIV_1 +#define RCC_MCO_DIV2 RCC_MCODIV_2 +#define RCC_MCO_DIV4 RCC_MCODIV_4 +#define RCC_MCO_DIV8 RCC_MCODIV_8 +#define RCC_MCO_DIV16 RCC_MCODIV_16 +#define RCC_MCO_DIV32 RCC_MCODIV_32 +#define RCC_MCO_DIV64 RCC_MCODIV_64 +#define RCC_MCO_DIV128 RCC_MCODIV_128 +#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK +#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI +#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE +#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK +#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI +#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14 +#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48 +#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE +#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2 + + +#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) +#define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE +#else +#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK +#endif + +#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1 +#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL +#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI +#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5 +#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2 +#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3 + +#define HSION_BitNumber RCC_HSION_BIT_NUMBER +#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER +#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER +#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER +#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER +#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER +#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER +#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER +#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER +#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER +#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER +#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER +#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER +#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER +#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER +#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER +#define LSION_BitNumber RCC_LSION_BIT_NUMBER +#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER +#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER +#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER +#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER +#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER +#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER +#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER +#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER +#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER +#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS +#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS +#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS +#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS +#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE +#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE + +#define CR_HSION_BB RCC_CR_HSION_BB +#define CR_CSSON_BB RCC_CR_CSSON_BB +#define CR_PLLON_BB RCC_CR_PLLON_BB +#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB +#define CR_MSION_BB RCC_CR_MSION_BB +#define CSR_LSION_BB RCC_CSR_LSION_BB +#define CSR_LSEON_BB RCC_CSR_LSEON_BB +#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB +#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB +#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB +#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB +#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB +#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB +#define CR_HSEON_BB RCC_CR_HSEON_BB +#define CSR_RMVF_BB RCC_CSR_RMVF_BB +#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB +#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB + +#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE +#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE +#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE +#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE +#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE + +#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT + +#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN +#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF + +#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48 +#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ +#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP +#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ +#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE +#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48 + +#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE +#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED +#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET +#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET +#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE +#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED +#define DfsdmClockSelection Dfsdm1ClockSelection +#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1 +#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK +#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG +#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE +#define RCC_DFSDM1CLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_SWPMI1CLKSOURCE_PCLK RCC_SWPMI1CLKSOURCE_PCLK1 +#define RCC_LPTIM1CLKSOURCE_PCLK RCC_LPTIM1CLKSOURCE_PCLK1 +#define RCC_LPTIM2CLKSOURCE_PCLK RCC_LPTIM2CLKSOURCE_PCLK1 + +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM1AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM1AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM2AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM2AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2 +#define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1 + + +/** + * @} + */ + +/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose + * @{ + */ +#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit) + +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx)|| defined (STM32L4Q5xx) || defined (STM32G4) +#else +#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG +#endif +#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT +#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT + +#if defined (STM32F1) +#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() + +#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT() + +#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT() + +#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG() + +#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() +#else +#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG())) +#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT())) +#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT())) +#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG())) +#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) +#endif /* STM32F1 */ + +#if defined (STM32F0) || defined (STM32F2) || defined (STM32F3) || defined (STM32F4) || defined (STM32F7) || \ + defined (STM32H7) || \ + defined (STM32L0) || defined (STM32L1) || \ + defined (STM32WB) +#define __HAL_RTC_TAMPER_GET_IT __HAL_RTC_TAMPER_GET_FLAG +#endif + +#define IS_ALARM IS_RTC_ALARM +#define IS_ALARM_MASK IS_RTC_ALARM_MASK +#define IS_TAMPER IS_RTC_TAMPER +#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE +#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER +#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT +#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE +#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION +#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE +#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ +#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION +#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER +#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK +#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER + +#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE +#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE + + +/** + * @} + */ + +/** @defgroup HAL_SD_Aliased_Macros HAL SD/MMC Aliased Macros maintained for legacy purpose + * @{ + */ + +#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE +#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS + +#if !defined(STM32F1) && !defined(STM32F2) && !defined(STM32F4) && !defined(STM32L1) +#define eMMC_HIGH_VOLTAGE_RANGE EMMC_HIGH_VOLTAGE_RANGE +#define eMMC_DUAL_VOLTAGE_RANGE EMMC_DUAL_VOLTAGE_RANGE +#define eMMC_LOW_VOLTAGE_RANGE EMMC_LOW_VOLTAGE_RANGE + +#define SDMMC_NSpeed_CLK_DIV SDMMC_NSPEED_CLK_DIV +#define SDMMC_HSpeed_CLK_DIV SDMMC_HSPEED_CLK_DIV +#endif + +#if defined(STM32F4) || defined(STM32F2) +#define SD_SDMMC_DISABLED SD_SDIO_DISABLED +#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY +#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED +#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION +#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND +#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT +#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED +#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE +#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE +#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE +#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL +#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT +#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT +#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG +#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG +#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT +#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT +#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS +#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT +#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND +/* alias CMSIS */ +#define SDMMC1_IRQn SDIO_IRQn +#define SDMMC1_IRQHandler SDIO_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define SD_SDIO_DISABLED SD_SDMMC_DISABLED +#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY +#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED +#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION +#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND +#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT +#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED +#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE +#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE +#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE +#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE +#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT +#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT +#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG +#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG +#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT +#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT +#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS +#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT +#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND +/* alias CMSIS for compatibilities */ +#define SDIO_IRQn SDMMC1_IRQn +#define SDIO_IRQHandler SDMMC1_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2) || defined(STM32L4) || defined(STM32H7) +#define HAL_SD_CardCIDTypedef HAL_SD_CardCIDTypeDef +#define HAL_SD_CardCSDTypedef HAL_SD_CardCSDTypeDef +#define HAL_SD_CardStatusTypedef HAL_SD_CardStatusTypeDef +#define HAL_SD_CardStateTypedef HAL_SD_CardStateTypeDef +#endif + +#if defined(STM32H7) || defined(STM32L5) +#define HAL_MMCEx_Read_DMADoubleBuffer0CpltCallback HAL_MMCEx_Read_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Read_DMADoubleBuffer1CpltCallback HAL_MMCEx_Read_DMADoubleBuf1CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer0CpltCallback HAL_MMCEx_Write_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer1CpltCallback HAL_MMCEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer0CpltCallback HAL_SDEx_Read_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer1CpltCallback HAL_SDEx_Read_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer0CpltCallback HAL_SDEx_Write_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer1CpltCallback HAL_SDEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SD_DriveTransciver_1_8V_Callback HAL_SD_DriveTransceiver_1_8V_Callback +#endif +/** + * @} + */ + +/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT +#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT +#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE +#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE +#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE +#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE + +#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE +#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE + +#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE + +/** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1 +#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2 +#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START +#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH +#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR +#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE +#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE +#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_SPI_1LINE_TX SPI_1LINE_TX +#define __HAL_SPI_1LINE_RX SPI_1LINE_RX +#define __HAL_SPI_RESET_CRC SPI_RESET_CRC + +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION +#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION + +#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD + +#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE +#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT +#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT +#define __USART_ENABLE __HAL_USART_ENABLE +#define __USART_DISABLE __HAL_USART_DISABLE + +#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE +#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE + +#if defined(STM32F0) || defined(STM32F3) || defined(STM32F7) +#define USART_OVERSAMPLING_16 0x00000000U +#define USART_OVERSAMPLING_8 USART_CR1_OVER8 + +#define IS_USART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == USART_OVERSAMPLING_16) || \ + ((__SAMPLING__) == USART_OVERSAMPLING_8)) +#endif /* STM32F0 || STM32F3 || STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose + * @{ + */ +#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE + +#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE +#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE +#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE + +#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE +#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE +#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE + +#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE + +#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT + +#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT + +#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup +#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup + +#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo +#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE +#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE + +#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE +#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT + +#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE + +#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN +#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER +#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER +#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER +#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD +#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD +#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION +#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION +#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER +#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER +#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE +#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE + +#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1 + +#define TIM_OCMODE_ASSYMETRIC_PWM1 TIM_OCMODE_ASYMMETRIC_PWM1 +#define TIM_OCMODE_ASSYMETRIC_PWM2 TIM_OCMODE_ASYMMETRIC_PWM2 +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT +#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT +#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG +#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER + +#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE +#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE +#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_LTDC_LAYER LTDC_LAYER +#define __HAL_LTDC_RELOAD_CONFIG __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG +/** + * @} + */ + +/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose + * @{ + */ +#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE +#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE +#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE +#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE +#define SAI_STREOMODE SAI_STEREOMODE +#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY +#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL +#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL +#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL +#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL +#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL +#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE +#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1 +#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE +/** + * @} + */ + +/** @defgroup HAL_SPDIFRX_Aliased_Macros HAL SPDIFRX Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32H7) +#define HAL_SPDIFRX_ReceiveControlFlow HAL_SPDIFRX_ReceiveCtrlFlow +#define HAL_SPDIFRX_ReceiveControlFlow_IT HAL_SPDIFRX_ReceiveCtrlFlow_IT +#define HAL_SPDIFRX_ReceiveControlFlow_DMA HAL_SPDIFRX_ReceiveCtrlFlow_DMA +#endif +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Functions HAL HRTIM Aliased Functions maintained for legacy purpose + * @{ + */ +#if defined (STM32H7) || defined (STM32G4) || defined (STM32F3) +#define HAL_HRTIM_WaveformCounterStart_IT HAL_HRTIM_WaveformCountStart_IT +#define HAL_HRTIM_WaveformCounterStart_DMA HAL_HRTIM_WaveformCountStart_DMA +#define HAL_HRTIM_WaveformCounterStart HAL_HRTIM_WaveformCountStart +#define HAL_HRTIM_WaveformCounterStop_IT HAL_HRTIM_WaveformCountStop_IT +#define HAL_HRTIM_WaveformCounterStop_DMA HAL_HRTIM_WaveformCountStop_DMA +#define HAL_HRTIM_WaveformCounterStop HAL_HRTIM_WaveformCountStop +#endif +/** + * @} + */ + +/** @defgroup HAL_QSPI_Aliased_Macros HAL QSPI Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32L4) || defined (STM32F4) || defined (STM32F7) || defined(STM32H7) +#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE HAL_QSPI_TIMEOUT_DEFAULT_VALUE +#endif /* STM32L4 || STM32F4 || STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_Generic_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32F7) +#define ART_ACCLERATOR_ENABLE ART_ACCELERATOR_ENABLE +#endif /* STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32_HAL_LEGACY */ + + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h new file mode 100644 index 0000000..1f855e2 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h @@ -0,0 +1,838 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the HAL + * module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_H +#define STM32G0xx_HAL_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_conf.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL HAL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup HAL_TICK_FREQ Tick Frequency + * @{ + */ +typedef enum +{ + HAL_TICK_FREQ_10HZ = 100U, + HAL_TICK_FREQ_100HZ = 10U, + HAL_TICK_FREQ_1KHZ = 1U, + HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ +} HAL_TickFreqTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup HAL_Exported_Constants HAL Exported Constants + * @{ + */ + +/** @defgroup SYSCFG_Exported_Constants SYSCFG Exported Constants + * @{ + */ + +/** @defgroup SYSCFG_BootMode Boot Mode + * @{ + */ +#define SYSCFG_BOOT_MAINFLASH 0x00000000U /*!< Main Flash memory mapped at 0x0000 0000 */ +#define SYSCFG_BOOT_SYSTEMFLASH SYSCFG_CFGR1_MEM_MODE_0 /*!< System Flash memory mapped at 0x0000 0000 */ +#define SYSCFG_BOOT_SRAM (SYSCFG_CFGR1_MEM_MODE_1 | SYSCFG_CFGR1_MEM_MODE_0) /*!< Embedded SRAM mapped at 0x0000 0000 */ + +/** + * @} + */ + +/** @defgroup SYSCFG_Break Break + * @{ + */ +#define SYSCFG_BREAK_SP SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM Parity error signal with Break Input of TIM1/15/16/17 */ +#if defined(SYSCFG_CFGR2_PVDL) +#define SYSCFG_BREAK_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection with TIM1/15/16/17 Break Input and also the PVDE and PLS bits of the Power Control Interface */ +#endif /* SYSCFG_CFGR2_PVDL */ +#define SYSCFG_BREAK_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM0+ with Break Input of TIM1/15/16/17 */ +#define SYSCFG_BREAK_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC of CortexM0+ with Break Input of TIM1/15/16/17 */ +/** + * @} + */ + +#if defined(SYSCFG_CDEN_SUPPORT) +/** @defgroup SYSCFG_ClampingDiode Clamping Diode + * @{ + */ +#define SYSCFG_CDEN_PA1 SYSCFG_CFGR2_PA1_CDEN /*!< Enables Clamping Diode on PA1 */ +#define SYSCFG_CDEN_PA3 SYSCFG_CFGR2_PA3_CDEN /*!< Enables Clamping Diode on PA3 */ +#define SYSCFG_CDEN_PA5 SYSCFG_CFGR2_PA5_CDEN /*!< Enables Clamping Diode on PA5 */ +#define SYSCFG_CDEN_PA6 SYSCFG_CFGR2_PA6_CDEN /*!< Enables Clamping Diode on PA6 */ +#define SYSCFG_CDEN_PA13 SYSCFG_CFGR2_PA13_CDEN /*!< Enables Clamping Diode on PA13 */ +#define SYSCFG_CDEN_PB0 SYSCFG_CFGR2_PB0_CDEN /*!< Enables Clamping Diode on PB0 */ +#define SYSCFG_CDEN_PB1 SYSCFG_CFGR2_PB1_CDEN /*!< Enables Clamping Diode on PB1 */ +#define SYSCFG_CDEN_PB2 SYSCFG_CFGR2_PB2_CDEN /*!< Enables Clamping Diode on PB2 */ + +/** + * @} + */ +#endif /* SYSCFG_CDEN_SUPPORT */ + +/** @defgroup HAL_Pin_remapping Pin remapping + * @{ + */ +/* Only available on cut2.0 */ +#define SYSCFG_REMAP_PA11 SYSCFG_CFGR1_PA11_RMP /*!< PA11 pad behaves digitally as PA9 GPIO pin */ +#define SYSCFG_REMAP_PA12 SYSCFG_CFGR1_PA12_RMP /*!< PA12 pad behaves digitally as PA10 GPIO pin */ +/** + * @} + */ + +/** @defgroup HAL_IR_ENV_SEL IR Modulation Envelope signal selection + * @{ + */ +#define HAL_SYSCFG_IRDA_ENV_SEL_TIM16 (SYSCFG_CFGR1_IR_MOD_0 & SYSCFG_CFGR1_IR_MOD_1) /*!< 00: Timer16 is selected as IR Modulation envelope source */ +#define HAL_SYSCFG_IRDA_ENV_SEL_USART1 (SYSCFG_CFGR1_IR_MOD_0) /*!< 01: USART1 is selected as IR Modulation envelope source */ +#if defined(USART4) +#define HAL_SYSCFG_IRDA_ENV_SEL_USART4 (SYSCFG_CFGR1_IR_MOD_1) /*!< 10: USART4 is selected as IR Modulation envelope source */ +#else +#define HAL_SYSCFG_IRDA_ENV_SEL_USART2 (SYSCFG_CFGR1_IR_MOD_1) /*!< 10: USART2 is selected as IR Modulation envelope source */ +#endif /* USART4 */ + +/** + * @} + */ + +/** @defgroup HAL_IR_POL_SEL IR output polarity selection + * @{ + */ +#define HAL_SYSCFG_IRDA_POLARITY_NOT_INVERTED 0x00000000U /*!< 00: IR output polarity not inverted */ +#define HAL_SYSCFG_IRDA_POLARITY_INVERTED SYSCFG_CFGR1_IR_POL /*!< 01: IR output polarity inverted */ + +/** + * @} + */ + +#if defined(VREFBUF) +/** @defgroup SYSCFG_VREFBUF_VoltageScale VREFBUF Voltage Scale + * @{ + */ +#define SYSCFG_VREFBUF_VOLTAGE_SCALE0 0x00000000U /*!< Voltage reference scale 0: VREF_OUT1 around 2.048 V. + This requires VDDA equal to or higher than 2.4 V. */ +#define SYSCFG_VREFBUF_VOLTAGE_SCALE1 VREFBUF_CSR_VRS /*!< Voltage reference scale 1: VREF_OUT1 around 2.5 V. + This requires VDDA equal to or higher than 2.8 V. */ + +/** + * @} + */ + +/** @defgroup SYSCFG_VREFBUF_HighImpedance VREFBUF High Impedance + * @{ + */ +#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE 0x00000000U /*!< VREF_plus pin is internally connected to Voltage reference buffer output */ +#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE VREFBUF_CSR_HIZ /*!< VREF_plus pin is high impedance */ + +/** + * @} + */ +#endif /* VREFBUF */ + +/** @defgroup SYSCFG_FastModePlus_GPIO Fast mode Plus on GPIO + * @{ + */ + +/** @brief Fast mode Plus driving capability on a specific GPIO + */ +#define SYSCFG_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast mode Plus on PB6 */ +#define SYSCFG_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast mode Plus on PB7 */ +#define SYSCFG_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast mode Plus on PB8 */ +#define SYSCFG_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast mode Plus on PB9 */ +#define SYSCFG_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_PA9_FMP /*!< Enable Fast mode Plus on PA9 */ +#define SYSCFG_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_PA10_FMP /*!< Enable Fast mode Plus on PA10 */ + +/** + * @} + */ + +/** @defgroup SYSCFG_FastModePlus_I2Cx Fast mode Plus driving capability activation for I2Cx + * @{ + */ + +/** @brief Fast mode Plus driving capability on a specific GPIO + */ +#define SYSCFG_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast mode Plus on I2C1 */ +#define SYSCFG_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C2_FMP /*!< Enable Fast mode Plus on I2C2 */ +#if defined (I2C3) +#define SYSCFG_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast mode Plus on I2C3 */ +#endif /* I2C3 */ + +/** + * @} + */ +#if defined (SYSCFG_CFGR1_UCPD1_STROBE) || defined (SYSCFG_CFGR1_UCPD2_STROBE) +/** @defgroup SYSCFG_UCPDx_STROBE SYSCFG Dead Battery feature configuration + * @{ + */ +#define SYSCFG_UCPD1_STROBE SYSCFG_CFGR1_UCPD1_STROBE /*!< UCPD1 Dead battery sw configuration */ +#define SYSCFG_UCPD2_STROBE SYSCFG_CFGR1_UCPD2_STROBE /*!< UCPD2 Dead battery sw configuration */ +/** + * @} + */ +#endif /* SYSCFG_CFGR1_UCPD1_STROBE) || SYSCFG_CFGR1_UCPD2_STROBE */ + +/** @defgroup HAL_ISR_Wrapper HAL ISR Wrapper + * @brief ISR Wrapper + * @{ + */ +#define HAL_SYSCFG_ITLINE0 0x00000000U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE1 0x00000001U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE2 0x00000002U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE3 0x00000003U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE4 0x00000004U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE5 0x00000005U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE6 0x00000006U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE7 0x00000007U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE8 0x00000008U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE9 0x00000009U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE10 0x0000000AU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE11 0x0000000BU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE12 0x0000000CU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE13 0x0000000DU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE14 0x0000000EU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE15 0x0000000FU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE16 0x00000010U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE17 0x00000011U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE18 0x00000012U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE19 0x00000013U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE20 0x00000014U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE21 0x00000015U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE22 0x00000016U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE23 0x00000017U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE24 0x00000018U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE25 0x00000019U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE26 0x0000001AU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE27 0x0000001BU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE28 0x0000001CU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE29 0x0000001DU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE30 0x0000001EU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE31 0x0000001FU /*!< Internal define for macro handling */ + +#define HAL_ITLINE_WWDG ((HAL_SYSCFG_ITLINE0 << 0x18U) | SYSCFG_ITLINE0_SR_EWDG) /*!< WWDG has expired .... */ +#if defined (PWR_PVD_SUPPORT) +#define HAL_ITLINE_PVDOUT ((HAL_SYSCFG_ITLINE1 << 0x18U) | SYSCFG_ITLINE1_SR_PVDOUT) /*!< Power voltage detection Interrupt .... */ +#endif /* PWR_PVD_SUPPORT */ +#if defined (PWR_PVM_SUPPORT) +#define HAL_ITLINE_PVMOUT ((HAL_SYSCFG_ITLINE1 << 0x18U) | SYSCFG_ITLINE1_SR_PVMOUT) /*!< Power voltage monitor Interrupt .... */ +#endif /* PWR_PVM_SUPPORT */ +#define HAL_ITLINE_RTC ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_RTC) /*!< RTC -> exti[19] Interrupt */ +#define HAL_ITLINE_TAMPER ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_TAMPER) /*!< TAMPER -> exti[21] interrupt .... */ +#define HAL_ITLINE_FLASH_ECC ((HAL_SYSCFG_ITLINE3 << 0x18U) | SYSCFG_ITLINE3_SR_FLASH_ECC) /*!< Flash ECC Interrupt */ +#define HAL_ITLINE_FLASH_ITF ((HAL_SYSCFG_ITLINE3 << 0x18U) | SYSCFG_ITLINE3_SR_FLASH_ITF) /*!< Flash ITF Interrupt */ +#define HAL_ITLINE_CLK_CTRL ((HAL_SYSCFG_ITLINE4 << 0x18U) | SYSCFG_ITLINE4_SR_CLK_CTRL) /*!< CLK Control Interrupt */ +#if defined (CRS) +#define HAL_ITLINE_CRS ((HAL_SYSCFG_ITLINE4 << 0x18U) | SYSCFG_ITLINE4_SR_CRS) /*!< CRS Interrupt */ +#endif /*CRS */ +#define HAL_ITLINE_EXTI0 ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI0) /*!< External Interrupt 0 */ +#define HAL_ITLINE_EXTI1 ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI1) /*!< External Interrupt 1 */ +#define HAL_ITLINE_EXTI2 ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI2) /*!< External Interrupt 2 */ +#define HAL_ITLINE_EXTI3 ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI3) /*!< External Interrupt 3 */ +#define HAL_ITLINE_EXTI4 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI4) /*!< EXTI4 Interrupt */ +#define HAL_ITLINE_EXTI5 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI5) /*!< EXTI5 Interrupt */ +#define HAL_ITLINE_EXTI6 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI6) /*!< EXTI6 Interrupt */ +#define HAL_ITLINE_EXTI7 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI7) /*!< EXTI7 Interrupt */ +#define HAL_ITLINE_EXTI8 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI8) /*!< EXTI8 Interrupt */ +#define HAL_ITLINE_EXTI9 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI9) /*!< EXTI9 Interrupt */ +#define HAL_ITLINE_EXTI10 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI10) /*!< EXTI10 Interrupt */ +#define HAL_ITLINE_EXTI11 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI11) /*!< EXTI11 Interrupt */ +#define HAL_ITLINE_EXTI12 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI12) /*!< EXTI12 Interrupt */ +#define HAL_ITLINE_EXTI13 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI13) /*!< EXTI13 Interrupt */ +#define HAL_ITLINE_EXTI14 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI14) /*!< EXTI14 Interrupt */ +#define HAL_ITLINE_EXTI15 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI15) /*!< EXTI15 Interrupt */ +#if defined (UCPD1) +#define HAL_ITLINE_UCPD1 ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_UCPD1) /*!< UCPD1 Interrupt */ +#endif /* UCPD1 */ +#if defined (UCPD2) +#define HAL_ITLINE_UCPD2 ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_UCPD2) /*!< UCPD2 Interrupt */ +#endif /* UCPD2 */ +#if defined (STM32G0C1xx) || defined (STM32G0B1xx) || defined (STM32G0B0xx) +#define HAL_ITLINE_USB ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_USB) /*!< USB Interrupt */ +#endif /* STM32G0C1xx) || STM32G0B1xx) || STM32G0B0xx */ +#define HAL_ITLINE_DMA1_CH1 ((HAL_SYSCFG_ITLINE9 << 0x18U) | SYSCFG_ITLINE9_SR_DMA1_CH1) /*!< DMA1 Channel 1 Interrupt */ +#define HAL_ITLINE_DMA1_CH2 ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH2) /*!< DMA1 Channel 2 Interrupt */ +#define HAL_ITLINE_DMA1_CH3 ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH3) /*!< DMA1 Channel 3 Interrupt */ +#define HAL_ITLINE_DMAMUX1 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMAMUX1) /*!< DMAMUX1 Interrupt */ +#define HAL_ITLINE_DMA1_CH4 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH4) /*!< DMA1 Channel 4 Interrupt */ +#define HAL_ITLINE_DMA1_CH5 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH5) /*!< DMA1 Channel 5 Interrupt */ +#if defined(DMA1_Channel7) +#define HAL_ITLINE_DMA1_CH6 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH6) /*!< DMA1 Channel 6 Interrupt */ +#define HAL_ITLINE_DMA1_CH7 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH7) /*!< DMA1 Channel 7 Interrupt */ +#endif /* DMA1_Channel7 */ +#if defined (DMA2) +#define HAL_ITLINE_DMA2_CH1 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH1) /*!< DMA2 Channel 1 Interrupt */ +#define HAL_ITLINE_DMA2_CH2 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH2) /*!< DMA2 Channel 2 Interrupt */ +#define HAL_ITLINE_DMA2_CH3 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH3) /*!< DMA2 Channel 3 Interrupt */ +#define HAL_ITLINE_DMA2_CH4 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH4) /*!< DMA2 Channel 4 Interrupt */ +#define HAL_ITLINE_DMA2_CH5 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH5) /*!< DMA2 Channel 5 Interrupt */ +#endif /* DMA2 */ +#define HAL_ITLINE_ADC ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_ADC) /*!< ADC Interrupt */ +#if defined (COMP1) +#define HAL_ITLINE_COMP1 ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP1) /*!< COMP1 Interrupt -> exti[17] */ +#endif /* COMP1 */ +#if defined (COMP2) +#define HAL_ITLINE_COMP2 ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP2) /*!< COMP2 Interrupt -> exti[18] */ +#endif /* COMP2 */ +#if defined (COMP3) +#define HAL_ITLINE_COMP3 ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP3) /*!< COMP3 Interrupt -> exti[1x] */ +#endif /* COMP3 */ +#define HAL_ITLINE_TIM1_BRK ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_BRK) /*!< TIM1 BRK Interrupt */ +#define HAL_ITLINE_TIM1_UPD ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_UPD) /*!< TIM1 UPD Interrupt */ +#define HAL_ITLINE_TIM1_TRG ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_TRG) /*!< TIM1 TRG Interrupt */ +#define HAL_ITLINE_TIM1_CCU ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_CCU) /*!< TIM1 CCU Interrupt */ +#define HAL_ITLINE_TIM1_CC ((HAL_SYSCFG_ITLINE14 << 0x18U) | SYSCFG_ITLINE14_SR_TIM1_CC) /*!< TIM1 CC Interrupt */ +#if defined (TIM2) +#define HAL_ITLINE_TIM2 ((HAL_SYSCFG_ITLINE15 << 0x18U) | SYSCFG_ITLINE15_SR_TIM2_GLB) /*!< TIM2 Interrupt */ +#endif /* TIM2 */ +#define HAL_ITLINE_TIM3 ((HAL_SYSCFG_ITLINE16 << 0x18U) | SYSCFG_ITLINE16_SR_TIM3_GLB) /*!< TIM3 Interrupt */ +#if defined (TIM4) +#define HAL_ITLINE_TIM4 ((HAL_SYSCFG_ITLINE16 << 0x18U) | SYSCFG_ITLINE16_SR_TIM4_GLB) /*!< TIM4 Interrupt */ +#endif /* TIM4 */ +#if defined(TIM6) +#define HAL_ITLINE_TIM6 ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_TIM6_GLB) /*!< TIM6 Interrupt */ +#endif /* TIM6 */ +#if defined(DAC1) +#define HAL_ITLINE_DAC ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_DAC) /*!< DAC Interrupt */ +#endif /* DAC1 */ +#if defined(LPTIM1) +#define HAL_ITLINE_LPTIM1 ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_LPTIM1_GLB) /*!< LPTIM1 Interrupt -> exti[29] */ +#endif /* LPTIM1 */ +#if defined(TIM7) +#define HAL_ITLINE_TIM7 ((HAL_SYSCFG_ITLINE18 << 0x18U) | SYSCFG_ITLINE18_SR_TIM7_GLB) /*!< TIM7 Interrupt */ +#endif /* TIM7 */ +#if defined(LPTIM2) +#define HAL_ITLINE_LPTIM2 ((HAL_SYSCFG_ITLINE18 << 0x18U) | SYSCFG_ITLINE18_SR_LPTIM2_GLB) /*!< LPTIM2 Interrupt -> exti[30] */ +#endif /* LPTIM2 */ +#define HAL_ITLINE_TIM14 ((HAL_SYSCFG_ITLINE19 << 0x18U) | SYSCFG_ITLINE19_SR_TIM14_GLB) /*!< TIM14 Interrupt */ +#if defined(TIM15) +#define HAL_ITLINE_TIM15 ((HAL_SYSCFG_ITLINE20 << 0x18U) | SYSCFG_ITLINE20_SR_TIM15_GLB) /*!< TIM15 Interrupt */ +#endif /* TIM15 */ +#define HAL_ITLINE_TIM16 ((HAL_SYSCFG_ITLINE21 << 0x18U) | SYSCFG_ITLINE21_SR_TIM16_GLB) /*!< TIM16 Interrupt */ +#if defined (FDCAN1) || defined (FDCAN2) +#define HAL_ITLINE_FDCAN1_IT0 ((HAL_SYSCFG_ITLINE21 << 0x18U) | SYSCFG_ITLINE21_SR_FDCAN1_IT0) /*!< FDCAN1_IT0 Interrupt */ +#define HAL_ITLINE_FDCAN2_IT0 ((HAL_SYSCFG_ITLINE21 << 0x18U) | SYSCFG_ITLINE21_SR_FDCAN2_IT0) /*!< FDCAN2_IT0 Interrupt */ +#endif /* FDCAN1 || FDCAN2 */ +#define HAL_ITLINE_TIM17 ((HAL_SYSCFG_ITLINE22 << 0x18U) | SYSCFG_ITLINE22_SR_TIM17_GLB) /*!< TIM17 Interrupt */ +#if defined (FDCAN1) || defined (FDCAN2) +#define HAL_ITLINE_FDCAN1_IT1 ((HAL_SYSCFG_ITLINE22 << 0x18U) | SYSCFG_ITLINE22_SR_FDCAN1_IT1) /*!< FDCAN1_IT1 Interrupt */ +#define HAL_ITLINE_FDCAN2_IT1 ((HAL_SYSCFG_ITLINE22 << 0x18U) | SYSCFG_ITLINE22_SR_FDCAN2_IT1) /*!< FDCAN2_IT1 Interrupt */ +#endif /* FDCAN1 || FDCAN2 */ +#define HAL_ITLINE_I2C1 ((HAL_SYSCFG_ITLINE23 << 0x18U) | SYSCFG_ITLINE23_SR_I2C1_GLB) /*!< I2C1 Interrupt -> exti[23] */ +#define HAL_ITLINE_I2C2 ((HAL_SYSCFG_ITLINE24 << 0x18U) | SYSCFG_ITLINE24_SR_I2C2_GLB) /*!< I2C2 Interrupt -> exti[24] */ +#if defined (I2C3) +#define HAL_ITLINE_I2C3 ((HAL_SYSCFG_ITLINE24 << 0x18U) | SYSCFG_ITLINE24_SR_I2C3_GLB) /*!< I2C3 Interrupt -> exti[22] */ +#endif /* I2C3 */ +#define HAL_ITLINE_SPI1 ((HAL_SYSCFG_ITLINE25 << 0x18U) | SYSCFG_ITLINE25_SR_SPI1) /*!< SPI1 Interrupt */ +#define HAL_ITLINE_SPI2 ((HAL_SYSCFG_ITLINE26 << 0x18U) | SYSCFG_ITLINE26_SR_SPI2) /*!< SPI2 Interrupt */ +#if defined (SPI3) +#define HAL_ITLINE_SPI3 ((HAL_SYSCFG_ITLINE26 << 0x18U) | SYSCFG_ITLINE26_SR_SPI3) /*!< SPI3 Interrupt */ +#endif /* SPI3 */ +#define HAL_ITLINE_USART1 ((HAL_SYSCFG_ITLINE27 << 0x18U) | SYSCFG_ITLINE27_SR_USART1_GLB) /*!< USART1 GLB Interrupt -> exti[25] */ +#define HAL_ITLINE_USART2 ((HAL_SYSCFG_ITLINE28 << 0x18U) | SYSCFG_ITLINE28_SR_USART2_GLB) /*!< USART2 GLB Interrupt -> exti[26] */ +#if defined (LPUART2) +#define HAL_ITLINE_LPUART2 ((HAL_SYSCFG_ITLINE28 << 0x18U) | SYSCFG_ITLINE28_SR_LPUART2_GLB) /*!< LPUART2 GLB Interrupt -> exti[26] */ +#endif /* LPUART2 */ +#if defined(USART3) +#define HAL_ITLINE_USART3 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART3_GLB) /*!< USART3 Interrupt .... */ +#endif /* USART3 */ +#if defined(USART4) +#define HAL_ITLINE_USART4 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART4_GLB) /*!< USART4 Interrupt .... */ +#endif /* USART4 */ +#if defined (LPUART1) +#define HAL_ITLINE_LPUART1 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_LPUART1_GLB) /*!< LPUART1 Interrupt -> exti[28]*/ +#endif /* LPUART1 */ +#if defined (USART5) +#define HAL_ITLINE_USART5 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART5_GLB) /*!< USART5 Interrupt .... */ +#endif /* USART5 */ +#if defined (USART6) +#define HAL_ITLINE_USART6 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART6_GLB) /*!< USART6 Interrupt .... */ +#endif /* USART6 */ +#if defined (CEC) +#define HAL_ITLINE_CEC ((HAL_SYSCFG_ITLINE30 << 0x18U) | SYSCFG_ITLINE30_SR_CEC) /*!< CEC Interrupt -> exti[27] */ +#endif /* CEC */ +#if defined (RNG) +#define HAL_ITLINE_RNG ((HAL_SYSCFG_ITLINE31 << 0x18U) | SYSCFG_ITLINE31_SR_RNG) /*!< RNG Interrupt */ +#endif /* RNG */ +#if defined (AES) +#define HAL_ITLINE_AES ((HAL_SYSCFG_ITLINE31 << 0x18U) | SYSCFG_ITLINE31_SR_AES) /*!< AES Interrupt */ +#endif /* AES */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup HAL_Exported_Macros HAL Exported Macros + * @{ + */ + +/** @defgroup DBG_Exported_Macros DBG Exported Macros + * @{ + */ + +/** @brief Freeze and Unfreeze Peripherals in Debug mode + */ +#if defined(DBG_APB_FZ1_DBG_TIM2_STOP) +#define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM2_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM2_STOP) +#endif /* DBG_APB_FZ1_DBG_TIM2_STOP */ + +#if defined(DBG_APB_FZ1_DBG_TIM3_STOP) +#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM3_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM3_STOP) +#endif /* DBG_APB_FZ1_DBG_TIM3_STOP */ + +#if defined(DBG_APB_FZ1_DBG_TIM4_STOP) +#define __HAL_DBGMCU_FREEZE_TIM4() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM4_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM4() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM4_STOP) +#endif /* DBG_APB_FZ1_DBG_TIM4_STOP */ + +#if defined(DBG_APB_FZ1_DBG_TIM6_STOP) +#define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM6_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM6_STOP) +#endif /* DBG_APB_FZ1_DBG_TIM6_STOP */ + +#if defined(DBG_APB_FZ1_DBG_TIM7_STOP) +#define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM7_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM7_STOP) +#endif /* DBG_APB_FZ1_DBG_TIM7_STOP */ + +#if defined(DBG_APB_FZ1_DBG_RTC_STOP) +#define __HAL_DBGMCU_FREEZE_RTC() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_RTC_STOP) +#define __HAL_DBGMCU_UNFREEZE_RTC() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_RTC_STOP) +#endif /* DBG_APB_FZ1_DBG_RTC_STOP */ + +#if defined(DBG_APB_FZ1_DBG_WWDG_STOP) +#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_WWDG_STOP) +#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_WWDG_STOP) +#endif /* DBG_APB_FZ1_DBG_WWDG_STOP */ + +#if defined(DBG_APB_FZ1_DBG_IWDG_STOP) +#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_IWDG_STOP) +#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_IWDG_STOP) +#endif /* DBG_APB_FZ1_DBG_IWDG_STOP */ + +#if defined(DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP) +#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP) +#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP) +#endif /* DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP */ + +#if defined(DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP) +#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP) +#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP) +#endif /* DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP */ + +#if defined(DBG_APB_FZ1_DBG_LPTIM1_STOP) +#define __HAL_DBGMCU_FREEZE_LPTIM1() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM1_STOP) +#define __HAL_DBGMCU_UNFREEZE_LPTIM1() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM1_STOP) +#endif /* DBG_APB_FZ1_DBG_LPTIM1_STOP */ + +#if defined(DBG_APB_FZ1_DBG_LPTIM2_STOP) +#define __HAL_DBGMCU_FREEZE_LPTIM2() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM2_STOP) +#define __HAL_DBGMCU_UNFREEZE_LPTIM2() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM2_STOP) +#endif /* DBG_APB_FZ1_DBG_LPTIM2_STOP */ + +#if defined(DBG_APB_FZ2_DBG_TIM1_STOP) +#define __HAL_DBGMCU_FREEZE_TIM1() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM1_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM1() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM1_STOP) +#endif /* DBG_APB_FZ2_DBG_TIM1_STOP */ + +#if defined(DBG_APB_FZ2_DBG_TIM14_STOP) +#define __HAL_DBGMCU_FREEZE_TIM14() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM14_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM14() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM14_STOP) +#endif /* DBG_APB_FZ2_DBG_TIM14_STOP */ + +#if defined(DBG_APB_FZ2_DBG_TIM15_STOP) +#define __HAL_DBGMCU_FREEZE_TIM15() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM15_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM15() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM15_STOP) +#endif /* DBG_APB_FZ2_DBG_TIM15_STOP */ + +#if defined(DBG_APB_FZ2_DBG_TIM16_STOP) +#define __HAL_DBGMCU_FREEZE_TIM16() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM16_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM16() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM16_STOP) +#endif /* DBG_APB_FZ2_DBG_TIM16_STOP */ + +#if defined(DBG_APB_FZ2_DBG_TIM17_STOP) +#define __HAL_DBGMCU_FREEZE_TIM17() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM17_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM17() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM17_STOP) +#endif /* DBG_APB_FZ2_DBG_TIM17_STOP */ + +/** + * @} + */ + +/** @defgroup SYSCFG_Exported_Macros SYSCFG Exported Macros + * @{ + */ + +/** + * @brief ISR wrapper check + * @note Allow to determine interrupt source per line. + */ +#define __HAL_GET_PENDING_IT(__SOURCE__) (SYSCFG->IT_LINE_SR[((__SOURCE__) >> 0x18U)] & ((__SOURCE__) & 0x00FFFFFF)) + +/** @brief Main Flash memory mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_FLASH() CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE) + +/** @brief System Flash memory mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, SYSCFG_CFGR1_MEM_MODE_0) + +/** @brief Embedded SRAM mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_SRAM() \ + MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, (SYSCFG_CFGR1_MEM_MODE_1|SYSCFG_CFGR1_MEM_MODE_0)) + +/** + * @brief Return the boot mode as configured by user. + * @retval The boot mode as configured by user. The returned value can be one + * of the following values @ref SYSCFG_BootMode + */ +#define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE) + +/** @brief SYSCFG Break ECC lock. + * Enable and lock the connection of Flash ECC error connection to TIM1 Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + */ +#define __HAL_SYSCFG_BREAK_ECC_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_ECCL) + + +/** @brief SYSCFG Break Cortex-M0+ Lockup lock. + * Enables and locks the connection of Cortex-M0+ LOCKUP (Hardfault) output to TIM1/15/16/17 Break input + * @note The selected configuration is locked and can be unlocked only by system reset. + */ +#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL) + +#if defined(SYSCFG_CFGR2_PVDL) +/** @brief SYSCFG Break PVD lock. + * Enables and locks the PVD connection with Timer1/15/16/17 Break input, as well as the PVDE and PLS[2:0] in the PWR_CR register + * @note The selected configuration is locked and can be unlocked only by system reset + */ +#define __HAL_SYSCFG_BREAK_PVD_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_PVDL) +#endif /* SYSCFG_CFGR2_PVDL */ + +/** @brief SYSCFG Break SRAM PARITY lock + * Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1/15/16/17 + * @note The selected configuration is locked and can only be unlocked by system reset + */ +#define __HAL_SYSCFG_BREAK_SRAMPARITY_LOCK() SET_BIT(SYSCFG->CFGR2,SYSCFG_CFGR2_SPL) + +/** @brief Parity check on RAM disable macro + * @note Disabling the parity check on RAM locks the configuration bit. + * To re-enable the parity check on RAM perform a system reset. + */ +#define __HAL_SYSCFG_RAM_PARITYCHECK_DISABLE() (SYSCFG->CFGR2 |= SYSCFG_CFGR2_SPF) + +/** @brief Set the PEF bit to clear the SRAM Parity Error Flag. + */ +#define __HAL_SYSCFG_CLEAR_FLAG() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPF) + +/** @brief Fast-mode Plus driving capability enable/disable macros + * @param __FASTMODEPLUS__ This parameter can be a value of @ref SYSCFG_FastModePlus_GPIO + */ +#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ + SET_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\ + }while(0U) + +#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ + CLEAR_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\ + }while(0U) + +#if defined(SYSCFG_CDEN_SUPPORT) +/** @brief Clamping Diode on specific pins enable/disable macros + * @param __PIN__ This parameter can be a combination of values @ref SYSCFG_ClampingDiode + */ +#define __HAL_SYSCFG_CLAMPINGDIODE_ENABLE(__PIN__) do {assert_param(IS_SYSCFG_CLAMPINGDIODE((__PIN__)));\ + SET_BIT(SYSCFG->CFGR2, (__PIN__));\ + }while(0U) + +#define __HAL_SYSCFG_CLAMPINGDIODE_DISABLE(__PIN__) do {assert_param(IS_SYSCFG_CLAMPINGDIODE((__PIN__)));\ + CLEAR_BIT(SYSCFG->CFGR2, (__PIN__));\ + }while(0U) +#endif /* SYSCFG_CDEN_SUPPORT */ + +/** @brief ISR wrapper check + * @note Allow to determine interrupt source per line. + */ +#define __HAL_SYSCFG_GET_PENDING_IT(__SOURCE__) \ + (SYSCFG->IT_LINE_SR[((__SOURCE__) >> 0x18U)] & ((__SOURCE__) & 0x00FFFFFFU)) + +/** @brief selection of the modulation envelope signal macro, using bits [7:6] of SYSCFG_CFGR1 register + * @param __SOURCE__ This parameter can be a value of @ref HAL_IR_ENV_SEL + */ +#define __HAL_SYSCFG_IRDA_ENV_SELECTION(__SOURCE__) do {assert_param(IS_HAL_SYSCFG_IRDA_ENV_SEL((__SOURCE__)));\ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_MOD);\ + SET_BIT(SYSCFG->CFGR1, (__SOURCE__));\ + }while(0U) + +#define __HAL_SYSCFG_GET_IRDA_ENV_SELECTION() ((SYSCFG->CFGR1) & 0x000000C0U) + +/** @brief IROut Polarity Selection, using bit[5] of SYSCFG_CFGR1 register + * @param __SEL__ This parameter can be a value of @ref HAL_IR_POL_SEL + */ +#define __HAL_SYSCFG_IRDA_OUT_POLARITY_SELECTION(__SEL__) do { assert_param(IS_HAL_SYSCFG_IRDA_POL_SEL((__SEL__)));\ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_POL);\ + SET_BIT(SYSCFG->CFGR1,(__SEL__));\ + }while(0U) + +/** + * @brief Return the IROut Polarity mode as configured by user. + * @retval The IROut polarity as configured by user. The returned value can be one + * of @ref HAL_IR_POL_SEL + */ +#define __HAL_SYSCFG_GET_POLARITY() READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_POL) + +/** @brief Break input to TIM1/15/16/17 capability enable/disable macros + * @param __BREAK__ This parameter can be a value of @ref SYSCFG_Break + */ +#define __HAL_SYSCFG_BREAK_ENABLE(__BREAK__) do {assert_param(IS_SYSCFG_BREAK_CONFIG((__BREAK__)));\ + SET_BIT(SYSCFG->CFGR2, (__BREAK__));\ + }while(0U) + +#define __HAL_SYSCFG_BREAK_DISABLE(__BREAK__) do {assert_param(IS_SYSCFG_BREAK_CONFIG((__BREAK__)));\ + CLEAR_BIT(SYSCFG->CFGR2, (__BREAK__));\ + }while(0U) + + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SYSCFG_Private_Macros SYSCFG Private Macros + * @{ + */ +#if defined (PWR_PVD_SUPPORT) +#define IS_SYSCFG_BREAK_CONFIG(__CONFIG__) (((__CONFIG__) == SYSCFG_BREAK_SP) || \ + ((__CONFIG__) == SYSCFG_BREAK_PVD) || \ + ((__CONFIG__) == SYSCFG_BREAK_ECC) || \ + ((__CONFIG__) == SYSCFG_BREAK_LOCKUP)) +#else +#define IS_SYSCFG_BREAK_CONFIG(__CONFIG__) (((__CONFIG__) == SYSCFG_BREAK_SP) || \ + ((__CONFIG__) == SYSCFG_BREAK_ECC) || \ + ((__CONFIG__) == SYSCFG_BREAK_LOCKUP)) +#endif /* PWR_PVD_SUPPORT */ + +#if defined(SYSCFG_CDEN_SUPPORT) +#define IS_SYSCFG_CLAMPINGDIODE(__PIN__) ((((__PIN__) & SYSCFG_CDEN_PA1) == SYSCFG_CDEN_PA1) || \ + (((__PIN__) & SYSCFG_CDEN_PA3) == SYSCFG_CDEN_PA3) || \ + (((__PIN__) & SYSCFG_CDEN_PA5) == SYSCFG_CDEN_PA5) || \ + (((__PIN__) & SYSCFG_CDEN_PA6) == SYSCFG_CDEN_PA6) || \ + (((__PIN__) & SYSCFG_CDEN_PA13) == SYSCFG_CDEN_PA13) || \ + (((__PIN__) & SYSCFG_CDEN_PB0) == SYSCFG_CDEN_PB0) || \ + (((__PIN__) & SYSCFG_CDEN_PB1) == SYSCFG_CDEN_PB1) || \ + (((__PIN__) & SYSCFG_CDEN_PB2) == SYSCFG_CDEN_PB2)) +#endif /* SYSCFG_CDEN_SUPPORT */ + +#if defined (USART4) +#define IS_HAL_SYSCFG_IRDA_ENV_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_TIM16) || \ + ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART1) || \ + ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART4)) +#else +#define IS_HAL_SYSCFG_IRDA_ENV_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_TIM16) || \ + ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART1) || \ + ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART2)) +#endif /* USART4 */ +#define IS_HAL_SYSCFG_IRDA_POL_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_POLARITY_NOT_INVERTED) || \ + ((SEL) == HAL_SYSCFG_IRDA_POLARITY_INVERTED)) + +#if defined (SYSCFG_CFGR1_UCPD1_STROBE) || defined (SYSCFG_CFGR1_UCPD2_STROBE) +#define IS_SYSCFG_DBATT_CONFIG(__CONFIG__) (((__CONFIG__) == SYSCFG_UCPD1_STROBE) || \ + ((__CONFIG__) == SYSCFG_UCPD2_STROBE) || \ + ((__CONFIG__) == (SYSCFG_UCPD1_STROBE | SYSCFG_UCPD2_STROBE))) +#endif /* SYSCFG_CFGR1_UCPD1_STROBE || SYSCFG_CFGR1_UCPD2_STROBE */ +#if defined(VREFBUF) +#define IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(__SCALE__) (((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE0) || \ + ((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE1)) + +#define IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(__VALUE__) (((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE) || \ + ((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE)) + +#define IS_SYSCFG_VREFBUF_TRIMMING(__VALUE__) (((__VALUE__) > 0U) && ((__VALUE__) <= VREFBUF_CCR_TRIM)) +#endif /* VREFBUF */ + +#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PA9) == SYSCFG_FASTMODEPLUS_PA9) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PA10) == SYSCFG_FASTMODEPLUS_PA10) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9)) + +#define IS_HAL_REMAP_PIN(RMP) (((RMP) == SYSCFG_REMAP_PA11) || \ + ((RMP) == SYSCFG_REMAP_PA12) || \ + ((RMP) == (SYSCFG_REMAP_PA11 | SYSCFG_REMAP_PA12))) +/** + * @} + */ + +/** @defgroup HAL_Private_Macros HAL Private Macros + * @{ + */ +#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \ + ((FREQ) == HAL_TICK_FREQ_100HZ) || \ + ((FREQ) == HAL_TICK_FREQ_1KHZ)) +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Functions HAL Exported Functions + * @{ + */ + +/** @defgroup HAL_Exported_Functions_Group1 HAL Initialization and Configuration functions + * @{ + */ + +/* Initialization and Configuration functions ******************************/ +HAL_StatusTypeDef HAL_Init(void); +HAL_StatusTypeDef HAL_DeInit(void); +void HAL_MspInit(void); +void HAL_MspDeInit(void); +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority); + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_IncTick(void); +void HAL_Delay(uint32_t Delay); +uint32_t HAL_GetTick(void); +uint32_t HAL_GetTickPrio(void); +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq); +HAL_TickFreqTypeDef HAL_GetTickFreq(void); +void HAL_SuspendTick(void); +void HAL_ResumeTick(void); +uint32_t HAL_GetHalVersion(void); +uint32_t HAL_GetREVID(void); +uint32_t HAL_GetDEVID(void); +uint32_t HAL_GetUIDw0(void); +uint32_t HAL_GetUIDw1(void); +uint32_t HAL_GetUIDw2(void); + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group3 DBGMCU Control functions + * @{ + */ + +/* DBGMCU Peripheral Control functions *****************************************/ +void HAL_DBGMCU_EnableDBGStopMode(void); +void HAL_DBGMCU_DisableDBGStopMode(void); +void HAL_DBGMCU_EnableDBGStandbyMode(void); +void HAL_DBGMCU_DisableDBGStandbyMode(void); + +/** + * @} + */ + +/* Exported variables ---------------------------------------------------------*/ +/** @addtogroup HAL_Exported_Variables + * @{ + */ +extern __IO uint32_t uwTick; +extern uint32_t uwTickPrio; +extern HAL_TickFreqTypeDef uwTickFreq; +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group4 SYSCFG configuration functions + * @{ + */ + +/* SYSCFG Control functions ****************************************************/ + +#if defined(VREFBUF) +void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling); +void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode); +void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue); +HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void); +void HAL_SYSCFG_DisableVREFBUF(void); +#endif /* VREFBUF */ + +void HAL_SYSCFG_EnableIOAnalogSwitchBooster(void); +void HAL_SYSCFG_DisableIOAnalogSwitchBooster(void); +void HAL_SYSCFG_EnableRemap(uint32_t PinRemap); +void HAL_SYSCFG_DisableRemap(uint32_t PinRemap); +#if defined(SYSCFG_CDEN_SUPPORT) +void HAL_SYSCFG_EnableClampingDiode(uint32_t PinConfig); +void HAL_SYSCFG_DisableClampingDiode(uint32_t PinConfig); +#endif /* SYSCFG_CDEN_SUPPORT */ +#if defined (SYSCFG_CFGR1_UCPD1_STROBE) || defined (SYSCFG_CFGR1_UCPD2_STROBE) +void HAL_SYSCFG_StrobeDBattpinsConfig(uint32_t ConfigDeadBattery); +#endif /* SYSCFG_CFGR1_UCPD1_STROBE || SYSCFG_CFGR1_UCPD2_STROBE */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_H */ + + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc.h new file mode 100644 index 0000000..7b2c360 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc.h @@ -0,0 +1,1943 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_adc.h + * @author MCD Application Team + * @brief Header file of ADC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_ADC_H +#define STM32G0xx_HAL_ADC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/* Include low level driver */ +#include "stm32g0xx_ll_adc.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup ADC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup ADC_Exported_Types ADC Exported Types + * @{ + */ + +/** + * @brief ADC group regular oversampling structure definition + */ +typedef struct +{ + uint32_t Ratio; /*!< Configures the oversampling ratio. + This parameter can be a value of @ref ADC_HAL_EC_OVS_RATIO */ + + uint32_t RightBitShift; /*!< Configures the division coefficient for the Oversampler. + This parameter can be a value of @ref ADC_HAL_EC_OVS_SHIFT */ + + uint32_t TriggeredMode; /*!< Selects the regular triggered oversampling mode. + This parameter can be a value of @ref ADC_HAL_EC_OVS_DISCONT_MODE */ + +} ADC_OversamplingTypeDef; + +/** + * @brief Structure definition of ADC instance and ADC group regular. + * @note Parameters of this structure are shared within 2 scopes: + * - Scope entire ADC (differentiation done for compatibility with some other STM32 series featuring ADC + * groups regular and injected): ClockPrescaler, Resolution, DataAlign, + * ScanConvMode, EOCSelection, LowPowerAutoWait. + * - Scope ADC group regular: ContinuousConvMode, NbrOfConversion, DiscontinuousConvMode, + * ExternalTrigConv, ExternalTrigConvEdge, DMAContinuousRequests, Overrun, OversamplingMode, Oversampling. + * @note The setting of these parameters by function HAL_ADC_Init() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters: ADC disabled + * - For all parameters except 'ClockPrescaler' and 'Resolution': ADC enabled without conversion on going on + * group regular. + * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed + * without error reporting (as it can be the expected behavior in case of intended action to update another + * parameter (which fulfills the ADC state condition) on the fly). + */ +typedef struct +{ + uint32_t ClockPrescaler; /*!< Select ADC clock source (synchronous clock derived from APB clock or asynchronous + clock derived from system clock or PLL (Refer to reference manual for list of + clocks available)) and clock prescaler. + This parameter can be a value of @ref ADC_HAL_EC_COMMON_CLOCK_SOURCE. + Note: The ADC clock configuration is common to all ADC instances. + Note: In case of synchronous clock mode based on HCLK/1, the configuration must + be enabled only if the system clock has a 50% duty clock cycle (APB + prescaler configured inside RCC must be bypassed and PCLK clock must have + 50% duty cycle). Refer to reference manual for details. + Note: In case of usage of asynchronous clock, the selected clock must be + preliminarily enabled at RCC top level. + Note: This parameter can be modified only if all ADC instances are disabled. */ + + uint32_t Resolution; /*!< Configure the ADC resolution. + This parameter can be a value of @ref ADC_HAL_EC_RESOLUTION */ + + uint32_t DataAlign; /*!< Specify ADC data alignment in conversion data register (right or left). + Refer to reference manual for alignments formats versus resolutions. + This parameter can be a value of @ref ADC_HAL_EC_DATA_ALIGN */ + + uint32_t ScanConvMode; /*!< Configure the sequencer of ADC group regular. + On this STM32 series, ADC group regular sequencer both modes "fully configurable" + or "not fully configurable" are available: + - sequencer configured to fully configurable: + sequencer length and each rank affectation to a channel are configurable. + - Sequence length: Set number of ranks in the scan sequence. + - Sequence direction: Unless specified in parameters, sequencer + scan direction is forward (from rank 1 to rank n). + - sequencer configured to not fully configurable: + sequencer length and each rank affectation to a channel are fixed by channel + HW number. + - Sequence length: Number of ranks in the scan sequence is + defined by number of channels set in the sequence, + rank of each channel is fixed by channel HW number. + (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + - Sequence direction: Unless specified in parameters, sequencer + scan direction is forward (from lowest channel number to + highest channel number). + This parameter can be associated to parameter 'DiscontinuousConvMode' to have + main sequence subdivided in successive parts. Sequencer is automatically enabled + if several channels are set (sequencer cannot be disabled, as it can be the case + on other STM32 devices): + If only 1 channel is set: Conversion is performed in single mode. + If several channels are set: Conversions are performed in sequence mode. + This parameter can be a value of @ref ADC_Scan_mode */ + + uint32_t EOCSelection; /*!< Specify which EOC (End Of Conversion) flag is used for conversion by polling and + interruption: end of unitary conversion or end of sequence conversions. + This parameter can be a value of @ref ADC_EOCSelection. */ + + FunctionalState LowPowerAutoWait; /*!< Select the dynamic low power Auto Delay: new conversion start only when the + previous conversion (for ADC group regular) has been retrieved by user software, + using function HAL_ADC_GetValue(). + This feature automatically adapts the frequency of ADC conversions triggers to + the speed of the system that reads the data. Moreover, this avoids risk of + overrun for low frequency applications. + This parameter can be set to ENABLE or DISABLE. + Note: It is not recommended to use with interruption or DMA (HAL_ADC_Start_IT(), + HAL_ADC_Start_DMA()) since these modes have to clear immediately the EOC + flag (by CPU to free the IRQ pending event or by DMA). + Auto wait will work but fort a very short time, discarding its intended + benefit (except specific case of high load of CPU or DMA transfers which + can justify usage of auto wait). + Do use with polling: 1. Start conversion with HAL_ADC_Start(), 2. Later on, + when ADC conversion data is needed: + use HAL_ADC_PollForConversion() to ensure that conversion is completed and + HAL_ADC_GetValue() to retrieve conversion result and trig another + conversion start. */ + + FunctionalState LowPowerAutoPowerOff; /*!< Select the auto-off mode: the ADC automatically powers-off after a + conversion and automatically wakes-up when a new conversion is triggered + (with startup time between trigger and start of sampling). + This feature can be combined with automatic wait mode + (parameter 'LowPowerAutoWait'). + This parameter can be set to ENABLE or DISABLE. */ + + FunctionalState ContinuousConvMode; /*!< Specify whether the conversion is performed in single mode (one conversion) + or continuous mode for ADC group regular, after the first ADC conversion + start trigger occurred (software start or external trigger). This parameter + can be set to ENABLE or DISABLE. */ + + uint32_t NbrOfConversion; /*!< Specify the number of ranks that will be converted within the regular group + sequencer. + This parameter is dependent on ScanConvMode: + - sequencer configured to fully configurable: + Number of ranks in the scan sequence is configurable using this parameter. + Note: After the first call of 'HAL_ADC_Init()', each rank corresponding to + parameter "NbrOfConversion" must be set using 'HAL_ADC_ConfigChannel()'. + Afterwards, when all needed sequencer ranks are set, parameter + 'NbrOfConversion' can be updated without modifying configuration of + sequencer ranks (sequencer ranks above 'NbrOfConversion' are discarded). + - sequencer configured to not fully configurable: + Number of ranks in the scan sequence is defined by number of channels set in + the sequence. This parameter is discarded. + This parameter must be a number between Min_Data = 1 and Max_Data = 8. + Note: This parameter must be modified when no conversion is on going on regular + group (ADC disabled, or ADC enabled without continuous mode or external + trigger that could launch a conversion). */ + + FunctionalState DiscontinuousConvMode; /*!< Specify whether the conversions sequence of ADC group regular is performed + in Complete-sequence/Discontinuous-sequence (main sequence subdivided in + successive parts). + Discontinuous mode is used only if sequencer is enabled (parameter + 'ScanConvMode'). If sequencer is disabled, this parameter is discarded. + Discontinuous mode can be enabled only if continuous mode is disabled. + If continuous mode is enabled, this parameter setting is discarded. + This parameter can be set to ENABLE or DISABLE. + Note: On this STM32 series, ADC group regular number of discontinuous + ranks increment is fixed to one-by-one. */ + + uint32_t ExternalTrigConv; /*!< Select the external event source used to trigger ADC group regular conversion + start. + If set to ADC_SOFTWARE_START, external triggers are disabled and software trigger + is used instead. + This parameter can be a value of @ref ADC_regular_external_trigger_source. + Caution: external trigger source is common to all ADC instances. */ + + uint32_t ExternalTrigConvEdge; /*!< Select the external event edge used to trigger ADC group regular conversion start + If trigger source is set to ADC_SOFTWARE_START, this parameter is discarded. + This parameter can be a value of @ref ADC_regular_external_trigger_edge */ + + FunctionalState DMAContinuousRequests; /*!< Specify whether the DMA requests are performed in one shot mode (DMA + transfer stops when number of conversions is reached) or in continuous + mode (DMA transfer unlimited, whatever number of conversions). + This parameter can be set to ENABLE or DISABLE. + Note: In continuous mode, DMA must be configured in circular mode. + Otherwise an overrun will be triggered when DMA buffer maximum + pointer is reached. */ + + uint32_t Overrun; /*!< Select the behavior in case of overrun: data overwritten or preserved (default). + This parameter can be a value of @ref ADC_HAL_EC_REG_OVR_DATA_BEHAVIOR. + Note: In case of overrun set to data preserved and usage with programming model + with interruption (HAL_Start_IT()): ADC IRQ handler has to clear end of + conversion flags, this induces the release of the preserved data. If + needed, this data can be saved in function HAL_ADC_ConvCpltCallback(), + placed in user program code (called before end of conversion flags clear) + Note: Error reporting with respect to the conversion mode: + - Usage with ADC conversion by polling for event or interruption: Error is + reported only if overrun is set to data preserved. If overrun is set to + data overwritten, user can willingly not read all the converted data, + this is not considered as an erroneous case. + - Usage with ADC conversion by DMA: Error is reported whatever overrun + setting (DMA is expected to process all data from data register). */ + + uint32_t SamplingTimeCommon1; /*!< Set sampling time common to a group of channels. + Unit: ADC clock cycles + Conversion time is the addition of sampling time and processing time + (12.5 ADC clock cycles at ADC resolution 12 bits, + 10.5 cycles at 10 bits, + 8.5 cycles at 8 bits, + 6.5 cycles at 6 bits). + Note: On this STM32 family, two different sampling time settings are available, + each channel can use one of these two settings. On some other STM32 devices + this parameter in channel wise and is located into ADC channel + initialization structure. + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL_SAMPLINGTIME + Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor) + sampling time constraints must be respected (sampling time can be adjusted + in function of ADC clock frequency and sampling time setting) + Refer to device datasheet for timings values, parameters TS_vrefint, + TS_vbat, TS_temp (values rough order: few tens of microseconds). */ + + uint32_t SamplingTimeCommon2; /*!< Set sampling time common to a group of channels, second common setting possible. + Unit: ADC clock cycles + Conversion time is the addition of sampling time and processing time + (12.5 ADC clock cycles at ADC resolution 12 bits, + 10.5 cycles at 10 bits, + 8.5 cycles at 8 bits, + 6.5 cycles at 6 bits). + Note: On this STM32 family, two different sampling time settings are available, + each channel can use one of these two settings. On some other STM32 devices + this parameter in channel wise and is located into ADC channel + initialization structure. + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL_SAMPLINGTIME + Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor) + sampling time constraints must be respected (sampling time can be adjusted + in function of ADC clock frequency and sampling time setting) + Refer to device datasheet for timings values, parameters TS_vrefint, + TS_vbat, TS_temp (values rough order: few tens of microseconds). */ + + FunctionalState OversamplingMode; /*!< Specify whether the oversampling feature is enabled or disabled. + This parameter can be set to ENABLE or DISABLE. + Note: This parameter can be modified only if there is no conversion is + ongoing on ADC group regular. */ + + ADC_OversamplingTypeDef Oversampling; /*!< Specify the Oversampling parameters. + Caution: this setting overwrites the previous oversampling configuration + if oversampling is already enabled. */ + + uint32_t TriggerFrequencyMode; /*!< Set ADC trigger frequency mode. + This parameter can be a value of @ref ADC_HAL_EC_REG_TRIGGER_FREQ. + Note: ADC trigger frequency mode must be set to low frequency when + a duration is exceeded before ADC conversion start trigger event + (between ADC enable and ADC conversion start trigger event + or between two ADC conversion start trigger event). + Duration value: Refer to device datasheet, parameter "tIdle". + Note: When ADC trigger frequency mode is set to low frequency, + some rearm cycles are inserted before performing ADC conversion + start, inducing a delay of 2 ADC clock cycles. */ + +} ADC_InitTypeDef; + +/** + * @brief Structure definition of ADC channel for regular group + * @note The setting of these parameters by function HAL_ADC_ConfigChannel() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters: ADC disabled or enabled without conversion on going on regular group. + * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed + * without error reporting (as it can be the expected behavior in case of intended action to update another + * parameter (which fulfills the ADC state condition) on the fly). + */ +typedef struct +{ + uint32_t Channel; /*!< Specify the channel to configure into ADC regular group. + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL + Note: Depending on devices and ADC instances, some channels may not be available + on device package pins. Refer to device datasheet for channels + availability. */ + + uint32_t Rank; /*!< Add or remove the channel from ADC regular group sequencer and specify its + conversion rank. + This parameter is dependent on ScanConvMode: + - sequencer configured to fully configurable: + Channels ordering into each rank of scan sequence: + whatever channel can be placed into whatever rank. + - sequencer configured to not fully configurable: + rank of each channel is fixed by channel HW number. + (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + Despite the channel rank is fixed, this parameter allow an additional + possibility: to remove the selected rank (selected channel) from sequencer. + This parameter can be a value of @ref ADC_HAL_EC_REG_SEQ_RANKS */ + + uint32_t SamplingTime; /*!< Sampling time value to be set for the selected channel. + Unit: ADC clock cycles + Conversion time is the addition of sampling time and processing time + (12.5 ADC clock cycles at ADC resolution 12 bits, + 10.5 cycles at 10 bits, + 8.5 cycles at 8 bits, + 6.5 cycles at 6 bits). + This parameter can be a value of @ref ADC_HAL_EC_SAMPLINGTIME_COMMON + Note: On this STM32 family, two different sampling time settings are available + (refer to parameters "SamplingTimeCommon1" and "SamplingTimeCommon2"), + each channel can use one of these two settings. + + Note: In case of usage of internal measurement channels (VrefInt/Vbat/ + TempSensor), sampling time constraints must be respected (sampling time + can be adjusted in function of ADC clock frequency and sampling time + setting) + Refer to device datasheet for timings values. */ + +} ADC_ChannelConfTypeDef; + +/** + * @brief Structure definition of ADC analog watchdog + * @note The setting of these parameters by function HAL_ADC_AnalogWDGConfig() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters except 'HighThreshold', 'LowThreshold': ADC disabled or ADC enabled without conversion + on going on ADC groups regular. + * - For parameters 'HighThreshold', 'LowThreshold': ADC enabled with conversion on going on regular. + */ +typedef struct +{ + uint32_t WatchdogNumber; /*!< Select which ADC analog watchdog is monitoring the selected channel. + For Analog Watchdog 1: Only 1 channel can be monitored (or overall group of channels + by setting parameter 'WatchdogMode') + For Analog Watchdog 2 and 3: Several channels can be monitored (by successive calls + of 'HAL_ADC_AnalogWDGConfig()' for each channel) + This parameter can be a value of @ref ADC_HAL_EC_AWD_NUMBER. */ + + uint32_t WatchdogMode; /*!< Configure the ADC analog watchdog mode: single/all/none channels. + For Analog Watchdog 1: Configure the ADC analog watchdog mode: single channel or all + channels, ADC group regular. + For Analog Watchdog 2 and 3: Several channels can be monitored by applying + successively the AWD init structure. + This parameter can be a value of @ref ADC_analog_watchdog_mode. */ + + uint32_t Channel; /*!< Select which ADC channel to monitor by analog watchdog. + For Analog Watchdog 1: this parameter has an effect only if parameter 'WatchdogMode' + is configured on single channel (only 1 channel can be + monitored). + For Analog Watchdog 2 and 3: Several channels can be monitored. To use this feature, + call successively the function HAL_ADC_AnalogWDGConfig() + for each channel to be added (or removed with value + 'ADC_ANALOGWATCHDOG_NONE'). + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL. */ + + FunctionalState ITMode; /*!< Specify whether the analog watchdog is configured in interrupt or polling mode. + This parameter can be set to ENABLE or DISABLE */ + + uint32_t HighThreshold; /*!< Configure the ADC analog watchdog High threshold value. + Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a + number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F + respectively. + Note: Analog watchdog 2 and 3 are limited to a resolution of 8 bits: if ADC + resolution is 12 bits the 4 LSB are ignored, if ADC resolution is 10 bits the 2 + LSB are ignored. + Note: If ADC oversampling is enabled, ADC analog watchdog thresholds are + impacted: the comparison of analog watchdog thresholds is done on + oversampling final computation (after ratio and shift application): + ADC data register bitfield [15:4] (12 most significant bits). */ + + uint32_t LowThreshold; /*!< Configures the ADC analog watchdog Low threshold value. + Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a + number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F + respectively. + Note: Analog watchdog 2 and 3 are limited to a resolution of 8 bits: if ADC + resolution is 12 bits the 4 LSB are ignored, if ADC resolution is 10 bits the 2 + LSB are ignored. + Note: If ADC oversampling is enabled, ADC analog watchdog thresholds are + impacted: the comparison of analog watchdog thresholds is done on + oversampling final computation (after ratio and shift application): + ADC data register bitfield [15:4] (12 most significant bits).*/ +} ADC_AnalogWDGConfTypeDef; + +/** @defgroup ADC_States ADC States + * @{ + */ + +/** + * @brief HAL ADC state machine: ADC states definition (bitfields) + * @note ADC state machine is managed by bitfields, state must be compared + * with bit by bit. + * For example: + * " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_REG_BUSY) != 0UL) " + * " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD1) != 0UL) " + */ +/* States of ADC global scope */ +#define HAL_ADC_STATE_RESET (0x00000000UL) /*!< ADC not yet initialized or disabled */ +#define HAL_ADC_STATE_READY (0x00000001UL) /*!< ADC peripheral ready for use */ +#define HAL_ADC_STATE_BUSY_INTERNAL (0x00000002UL) /*!< ADC is busy from internal process (ex : calibration, ...) */ +#define HAL_ADC_STATE_TIMEOUT (0x00000004UL) /*!< TimeOut occurrence */ + +/* States of ADC errors */ +#define HAL_ADC_STATE_ERROR_INTERNAL (0x00000010UL) /*!< Internal error occurrence */ +#define HAL_ADC_STATE_ERROR_CONFIG (0x00000020UL) /*!< Configuration error occurrence */ +#define HAL_ADC_STATE_ERROR_DMA (0x00000040UL) /*!< DMA error occurrence */ + +/* States of ADC group regular */ +#define HAL_ADC_STATE_REG_BUSY (0x00000100UL) /*!< A conversion on ADC group regular is ongoing or can occur + (either by continuous mode, external trigger, low power + auto power-on (if feature available), multimode ADC master + control (if feature available)) */ +#define HAL_ADC_STATE_REG_EOC (0x00000200UL) /*!< Conversion data available on group regular */ +#define HAL_ADC_STATE_REG_OVR (0x00000400UL) /*!< Overrun occurrence */ +#define HAL_ADC_STATE_REG_EOSMP (0x00000800UL) /*!< Not available on this STM32 series: End Of Sampling flag + raised */ + +/* States of ADC group injected */ +#define HAL_ADC_STATE_INJ_BUSY (0x00001000UL) /*!< Not available on this STM32 series: A conversion on group + injected is ongoing or can occur (either by auto-injection + mode, external trigger, low power auto power-on (if feature + available), multimode ADC master control (if feature + available))*/ +#define HAL_ADC_STATE_INJ_EOC (0x00002000UL) /*!< Not available on this STM32 series: Conversion data + available on group injected */ +#define HAL_ADC_STATE_INJ_JQOVF (0x00004000UL) /*!< Not available on this STM32 series: Injected queue overflow + occurrence */ + +/* States of ADC analog watchdogs */ +#define HAL_ADC_STATE_AWD1 (0x00010000UL) /*!< Out-of-window occurrence of ADC analog watchdog 1 */ +#define HAL_ADC_STATE_AWD2 (0x00020000UL) /*!< Out-of-window occurrence of ADC analog watchdog 2 */ +#define HAL_ADC_STATE_AWD3 (0x00040000UL) /*!< Out-of-window occurrence of ADC analog watchdog 3 */ + +/* States of ADC multi-mode */ +#define HAL_ADC_STATE_MULTIMODE_SLAVE (0x00100000UL) /*!< Not available on this STM32 series: ADC in multimode slave + state, controlled by another ADC master (when feature + available) */ + + +/** + * @} + */ + +/** + * @brief ADC handle Structure definition + */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +typedef struct __ADC_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +{ + ADC_TypeDef *Instance; /*!< Register base address */ + ADC_InitTypeDef Init; /*!< ADC initialization parameters and regular conversions setting */ + DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */ + HAL_LockTypeDef Lock; /*!< ADC locking object */ + __IO uint32_t State; /*!< ADC communication state (bitmap of ADC states) */ + __IO uint32_t ErrorCode; /*!< ADC Error code */ + + uint32_t ADCGroupRegularSequencerRanks; /*!< ADC group regular sequencer memorization of ranks + setting, used in mode "fully configurable" (refer to + parameter 'ScanConvMode') */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + void (* ConvCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion complete callback */ + void (* ConvHalfCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion DMA half-transfer + callback */ + void (* LevelOutOfWindowCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 1 callback */ + void (* ErrorCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC error callback */ + void (* LevelOutOfWindow2Callback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 2 callback */ + void (* LevelOutOfWindow3Callback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 3 callback */ + void (* EndOfSamplingCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC end of sampling callback */ + void (* MspInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp Init callback */ + void (* MspDeInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp DeInit callback */ +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +} ADC_HandleTypeDef; + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL ADC Callback ID enumeration definition + */ +typedef enum +{ + HAL_ADC_CONVERSION_COMPLETE_CB_ID = 0x00U, /*!< ADC conversion complete callback ID */ + HAL_ADC_CONVERSION_HALF_CB_ID = 0x01U, /*!< ADC conversion DMA half-transfer callback ID */ + HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID = 0x02U, /*!< ADC analog watchdog 1 callback ID */ + HAL_ADC_ERROR_CB_ID = 0x03U, /*!< ADC error callback ID */ + HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID = 0x06U, /*!< ADC analog watchdog 2 callback ID */ + HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID = 0x07U, /*!< ADC analog watchdog 3 callback ID */ + HAL_ADC_END_OF_SAMPLING_CB_ID = 0x08U, /*!< ADC end of sampling callback ID */ + HAL_ADC_MSPINIT_CB_ID = 0x09U, /*!< ADC Msp Init callback ID */ + HAL_ADC_MSPDEINIT_CB_ID = 0x0AU /*!< ADC Msp DeInit callback ID */ +} HAL_ADC_CallbackIDTypeDef; + +/** + * @brief HAL ADC Callback pointer definition + */ +typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to a ADC callback function */ + +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @} + */ + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Constants ADC Exported Constants + * @{ + */ + +/** @defgroup ADC_Error_Code ADC Error Code + * @{ + */ +#define HAL_ADC_ERROR_NONE (0x00U) /*!< No error */ +#define HAL_ADC_ERROR_INTERNAL (0x01U) /*!< ADC peripheral internal error (problem of clocking, + enable/disable, erroneous state, ...) */ +#define HAL_ADC_ERROR_OVR (0x02U) /*!< Overrun error */ +#define HAL_ADC_ERROR_DMA (0x04U) /*!< DMA transfer error */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +#define HAL_ADC_ERROR_INVALID_CALLBACK (0x10U) /*!< Invalid Callback error */ +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_COMMON_CLOCK_SOURCE ADC common - Clock source + * @{ + */ +#define ADC_CLOCK_SYNC_PCLK_DIV1 (LL_ADC_CLOCK_SYNC_PCLK_DIV1) /*!< ADC synchronous clock from AHB clock + without prescaler. This configuration must be enabled only if PCLK has + a 50% duty clock cycle (APB prescaler configured inside the RCC must + be bypassed and the system clock must by 50% duty cycle) */ +#define ADC_CLOCK_SYNC_PCLK_DIV2 (LL_ADC_CLOCK_SYNC_PCLK_DIV2) /*!< ADC synchronous clock from AHB clock + with prescaler division by 2 */ +#define ADC_CLOCK_SYNC_PCLK_DIV4 (LL_ADC_CLOCK_SYNC_PCLK_DIV4) /*!< ADC synchronous clock from AHB clock + with prescaler division by 4 */ + +#define ADC_CLOCK_ASYNC_DIV1 (LL_ADC_CLOCK_ASYNC_DIV1) /*!< ADC asynchronous clock without + prescaler */ +#define ADC_CLOCK_ASYNC_DIV2 (LL_ADC_CLOCK_ASYNC_DIV2) /*!< ADC asynchronous clock with prescaler + division by 2 */ +#define ADC_CLOCK_ASYNC_DIV4 (LL_ADC_CLOCK_ASYNC_DIV4) /*!< ADC asynchronous clock with prescaler + division by 4 */ +#define ADC_CLOCK_ASYNC_DIV6 (LL_ADC_CLOCK_ASYNC_DIV6) /*!< ADC asynchronous clock with prescaler + division by 6 */ +#define ADC_CLOCK_ASYNC_DIV8 (LL_ADC_CLOCK_ASYNC_DIV8) /*!< ADC asynchronous clock with prescaler + division by 8 */ +#define ADC_CLOCK_ASYNC_DIV10 (LL_ADC_CLOCK_ASYNC_DIV10) /*!< ADC asynchronous clock with prescaler + division by 10 */ +#define ADC_CLOCK_ASYNC_DIV12 (LL_ADC_CLOCK_ASYNC_DIV12) /*!< ADC asynchronous clock with prescaler + division by 12 */ +#define ADC_CLOCK_ASYNC_DIV16 (LL_ADC_CLOCK_ASYNC_DIV16) /*!< ADC asynchronous clock with prescaler + division by 16 */ +#define ADC_CLOCK_ASYNC_DIV32 (LL_ADC_CLOCK_ASYNC_DIV32) /*!< ADC asynchronous clock with prescaler + division by 32 */ +#define ADC_CLOCK_ASYNC_DIV64 (LL_ADC_CLOCK_ASYNC_DIV64) /*!< ADC asynchronous clock with prescaler + division by 64 */ +#define ADC_CLOCK_ASYNC_DIV128 (LL_ADC_CLOCK_ASYNC_DIV128) /*!< ADC asynchronous clock with prescaler + division by 128 */ +#define ADC_CLOCK_ASYNC_DIV256 (LL_ADC_CLOCK_ASYNC_DIV256) /*!< ADC asynchronous clock with prescaler + division by 256 */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_RESOLUTION ADC instance - Resolution + * @{ + */ +#define ADC_RESOLUTION_12B (LL_ADC_RESOLUTION_12B) /*!< ADC resolution 12 bits */ +#define ADC_RESOLUTION_10B (LL_ADC_RESOLUTION_10B) /*!< ADC resolution 10 bits */ +#define ADC_RESOLUTION_8B (LL_ADC_RESOLUTION_8B) /*!< ADC resolution 8 bits */ +#define ADC_RESOLUTION_6B (LL_ADC_RESOLUTION_6B) /*!< ADC resolution 6 bits */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_DATA_ALIGN ADC conversion data alignment + * @{ + */ +#define ADC_DATAALIGN_RIGHT (LL_ADC_DATA_ALIGN_RIGHT) /*!< ADC conversion data alignment: right aligned + (alignment on data register LSB bit 0)*/ +#define ADC_DATAALIGN_LEFT (LL_ADC_DATA_ALIGN_LEFT) /*!< ADC conversion data alignment: left aligned + (alignment on data register MSB bit 15)*/ +/** + * @} + */ + +/** @defgroup ADC_Scan_mode ADC sequencer scan mode + * @{ + */ +/* Note: On this STM32 family, ADC group regular sequencer both modes */ +/* "fully configurable" or "not fully configurable" are */ +/* available. */ +/* Scan mode values must be compatible with other STM32 devices having */ +/* a configurable sequencer. */ +/* Scan direction setting values are defined by taking in account */ +/* already defined values for other STM32 devices: */ +/* ADC_SCAN_DISABLE (0x00000000UL) */ +/* ADC_SCAN_ENABLE (0x00000001UL) */ +/* Sequencer fully configurable with only rank 1 enabled is considered */ +/* as default setting equivalent to scan enable. */ +/* In case of migration from another STM32 device, the user will be */ +/* warned of change of setting choices with assert check. */ +/* Sequencer set to fully configurable */ +#define ADC_SCAN_DISABLE (0x00000000UL) /*!< Sequencer set to fully configurable: + only the rank 1 is enabled (no scan sequence on several ranks) */ +#define ADC_SCAN_ENABLE (ADC_CFGR1_CHSELRMOD) /*!< Sequencer set to fully configurable: + sequencer length and each rank affectation to a channel are configurable. */ + +/* Sequencer set to not fully configurable */ +#define ADC_SCAN_SEQ_FIXED (ADC_SCAN_SEQ_FIXED_INT) /*!< Sequencer set to not fully configurable: + sequencer length and each rank affectation to a channel are fixed by + channel HW number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + Scan direction forward: from channel 0 to channel 18 */ +#define ADC_SCAN_SEQ_FIXED_BACKWARD (ADC_SCAN_SEQ_FIXED_INT \ + | ADC_CFGR1_SCANDIR) /*!< Sequencer set to not fully configurable: + sequencer length and each rank affectation to a channel are fixed by + channel HW number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + Scan direction backward: from channel 18 to channel 0 */ + +#define ADC_SCAN_DIRECTION_FORWARD (ADC_SCAN_SEQ_FIXED) /* For compatibility with other STM32 series */ +#define ADC_SCAN_DIRECTION_BACKWARD (ADC_SCAN_SEQ_FIXED_BACKWARD) /* For compatibility with other STM32 series */ +/** + * @} + */ + +/** @defgroup ADC_regular_external_trigger_source ADC group regular trigger source + * @{ + */ +/* ADC group regular trigger sources for all ADC instances */ +#define ADC_SOFTWARE_START (LL_ADC_REG_TRIG_SOFTWARE) /*!< ADC group regular conversion + trigger software start */ +#define ADC_EXTERNALTRIG_T1_TRGO2 (LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) /*!< ADC group regular conversion + trigger from external peripheral: TIM1 TRGO. */ +#define ADC_EXTERNALTRIG_T1_CC4 (LL_ADC_REG_TRIG_EXT_TIM1_CH4) /*!< ADC group regular conversion + trigger from external peripheral: TIM1 channel 4 event (capture compare). */ +#if defined(TIM2) +#define ADC_EXTERNALTRIG_T2_TRGO (LL_ADC_REG_TRIG_EXT_TIM2_TRGO) /*!< ADC group regular conversion + trigger from external peripheral: TIM2 TRGO. */ +#endif /* TIM2 */ +#define ADC_EXTERNALTRIG_T3_TRGO (LL_ADC_REG_TRIG_EXT_TIM3_TRGO) /*!< ADC group regular conversion + trigger from external peripheral: TIM3 TRGO. */ +#if defined(TIM4) +#define ADC_EXTERNALTRIG_T4_TRGO (LL_ADC_REG_TRIG_EXT_TIM4_TRGO) /*!< ADC group regular conversion + trigger from external peripheral: TIM4 TRGO. */ +#endif /* TIM4 */ +#if defined(TIM6) +#define ADC_EXTERNALTRIG_T6_TRGO (LL_ADC_REG_TRIG_EXT_TIM6_TRGO) /*!< ADC group regular conversion + trigger from external peripheral: TIM6 TRGO. */ +#endif /* TIM6 */ +#if defined(TIM15) +#define ADC_EXTERNALTRIG_T15_TRGO (LL_ADC_REG_TRIG_EXT_TIM15_TRGO) /*!< ADC group regular conversion + trigger from external peripheral: TIM15 TRGO. */ +#endif /* TIM15 */ +#define ADC_EXTERNALTRIG_EXT_IT11 (LL_ADC_REG_TRIG_EXT_EXTI_LINE11) /*!< ADC group regular conversion + trigger from external peripheral: external interrupt line 11. */ +/** + * @} + */ + +/** @defgroup ADC_regular_external_trigger_edge ADC group regular trigger edge (when external trigger is selected) + * @{ + */ +#define ADC_EXTERNALTRIGCONVEDGE_NONE (0x00000000UL) /*!< ADC group regular trigger + disabled (SW start)*/ +#define ADC_EXTERNALTRIGCONVEDGE_RISING (LL_ADC_REG_TRIG_EXT_RISING) /*!< ADC group regular conversion + trigger polarity set to rising edge */ +#define ADC_EXTERNALTRIGCONVEDGE_FALLING (LL_ADC_REG_TRIG_EXT_FALLING) /*!< ADC group regular conversion + trigger polarity set to falling edge */ +#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING (LL_ADC_REG_TRIG_EXT_RISINGFALLING) /*!< ADC group regular conversion + trigger polarity set to both rising and falling edges */ +/** + * @} + */ + +/** @defgroup ADC_EOCSelection ADC sequencer end of unitary conversion or sequence conversions + * @{ + */ +#define ADC_EOC_SINGLE_CONV (ADC_ISR_EOC) /*!< End of unitary conversion flag */ +#define ADC_EOC_SEQ_CONV (ADC_ISR_EOS) /*!< End of sequence conversions flag */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_REG_OVR_DATA_BEHAVIOR ADC group regular - Overrun behavior on conversion data + * @{ + */ +#define ADC_OVR_DATA_PRESERVED (LL_ADC_REG_OVR_DATA_PRESERVED) /*!< ADC group regular behavior in case + of overrun: data preserved */ +#define ADC_OVR_DATA_OVERWRITTEN (LL_ADC_REG_OVR_DATA_OVERWRITTEN) /*!< ADC group regular behavior in case + of overrun: data overwritten */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_REG_SEQ_RANKS ADC group regular - Sequencer ranks + * @{ + */ +#define ADC_RANK_CHANNEL_NUMBER (0x00000001U) /*!< Enable the rank of the selected channels. Number of + ranks in the sequence is defined by number of channels enabled, rank of + each channel is defined by channel number (channel 0 fixed on rank 0, + channel 1 fixed on rank1, ...). + Setting relevant if parameter "ScanConvMode" is set to sequencer not fully + configurable. */ +#define ADC_RANK_NONE (0x00000002U) /*!< Disable the selected rank (selected channel) from + sequencer. + Setting relevant if parameter "ScanConvMode" is set to sequencer not fully + configurable. */ + +#define ADC_REGULAR_RANK_1 (LL_ADC_REG_RANK_1) /*!< ADC group regular sequencer rank 1 */ +#define ADC_REGULAR_RANK_2 (LL_ADC_REG_RANK_2) /*!< ADC group regular sequencer rank 2 */ +#define ADC_REGULAR_RANK_3 (LL_ADC_REG_RANK_3) /*!< ADC group regular sequencer rank 3 */ +#define ADC_REGULAR_RANK_4 (LL_ADC_REG_RANK_4) /*!< ADC group regular sequencer rank 4 */ +#define ADC_REGULAR_RANK_5 (LL_ADC_REG_RANK_5) /*!< ADC group regular sequencer rank 5 */ +#define ADC_REGULAR_RANK_6 (LL_ADC_REG_RANK_6) /*!< ADC group regular sequencer rank 6 */ +#define ADC_REGULAR_RANK_7 (LL_ADC_REG_RANK_7) /*!< ADC group regular sequencer rank 7 */ +#define ADC_REGULAR_RANK_8 (LL_ADC_REG_RANK_8) /*!< ADC group regular sequencer rank 8 */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_SAMPLINGTIME_COMMON ADC instance - Sampling time common to a group of channels + * @{ + */ +#define ADC_SAMPLINGTIME_COMMON_1 (LL_ADC_SAMPLINGTIME_COMMON_1) /*!< Set sampling time common to a group of + channels: sampling time nb 1 */ +#define ADC_SAMPLINGTIME_COMMON_2 (LL_ADC_SAMPLINGTIME_COMMON_2) /*!< Set sampling time common to a group of + channels: sampling time nb 2 */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_CHANNEL_SAMPLINGTIME Channel - Sampling time + * @{ + */ +#define ADC_SAMPLETIME_1CYCLE_5 (LL_ADC_SAMPLINGTIME_1CYCLE_5) /*!< Sampling time 1.5 ADC clock cycle */ +#define ADC_SAMPLETIME_3CYCLES_5 (LL_ADC_SAMPLINGTIME_3CYCLES_5) /*!< Sampling time 3.5 ADC clock cycles */ +#define ADC_SAMPLETIME_7CYCLES_5 (LL_ADC_SAMPLINGTIME_7CYCLES_5) /*!< Sampling time 7.5 ADC clock cycles */ +#define ADC_SAMPLETIME_12CYCLES_5 (LL_ADC_SAMPLINGTIME_12CYCLES_5) /*!< Sampling time 12.5 ADC clock cycles */ +#define ADC_SAMPLETIME_19CYCLES_5 (LL_ADC_SAMPLINGTIME_19CYCLES_5) /*!< Sampling time 19.5 ADC clock cycles */ +#define ADC_SAMPLETIME_39CYCLES_5 (LL_ADC_SAMPLINGTIME_39CYCLES_5) /*!< Sampling time 39.5 ADC clock cycles */ +#define ADC_SAMPLETIME_79CYCLES_5 (LL_ADC_SAMPLINGTIME_79CYCLES_5) /*!< Sampling time 79.5 ADC clock cycles */ +#define ADC_SAMPLETIME_160CYCLES_5 (LL_ADC_SAMPLINGTIME_160CYCLES_5) /*!< Sampling time 160.5 ADC clock cycles */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_CHANNEL ADC instance - Channel number + * @{ + */ +#define ADC_CHANNEL_0 (LL_ADC_CHANNEL_0) /*!< External channel (GPIO pin) ADCx_IN0 */ +#define ADC_CHANNEL_1 (LL_ADC_CHANNEL_1) /*!< External channel (GPIO pin) ADCx_IN1 */ +#define ADC_CHANNEL_2 (LL_ADC_CHANNEL_2) /*!< External channel (GPIO pin) ADCx_IN2 */ +#define ADC_CHANNEL_3 (LL_ADC_CHANNEL_3) /*!< External channel (GPIO pin) ADCx_IN3 */ +#define ADC_CHANNEL_4 (LL_ADC_CHANNEL_4) /*!< External channel (GPIO pin) ADCx_IN4 */ +#define ADC_CHANNEL_5 (LL_ADC_CHANNEL_5) /*!< External channel (GPIO pin) ADCx_IN5 */ +#define ADC_CHANNEL_6 (LL_ADC_CHANNEL_6) /*!< External channel (GPIO pin) ADCx_IN6 */ +#define ADC_CHANNEL_7 (LL_ADC_CHANNEL_7) /*!< External channel (GPIO pin) ADCx_IN7 */ +#define ADC_CHANNEL_8 (LL_ADC_CHANNEL_8) /*!< External channel (GPIO pin) ADCx_IN8 */ +#define ADC_CHANNEL_9 (LL_ADC_CHANNEL_9) /*!< External channel (GPIO pin) ADCx_IN9 */ +#define ADC_CHANNEL_10 (LL_ADC_CHANNEL_10) /*!< External channel (GPIO pin) ADCx_IN10 */ +#define ADC_CHANNEL_11 (LL_ADC_CHANNEL_11) /*!< External channel (GPIO pin) ADCx_IN11 */ +#define ADC_CHANNEL_12 (LL_ADC_CHANNEL_12) /*!< External channel (GPIO pin) ADCx_IN12 */ +#define ADC_CHANNEL_13 (LL_ADC_CHANNEL_13) /*!< External channel (GPIO pin) ADCx_IN13 */ +#define ADC_CHANNEL_14 (LL_ADC_CHANNEL_14) /*!< External channel (GPIO pin) ADCx_IN14 */ +#define ADC_CHANNEL_15 (LL_ADC_CHANNEL_15) /*!< External channel (GPIO pin) ADCx_IN15 */ +#define ADC_CHANNEL_16 (LL_ADC_CHANNEL_16) /*!< External channel (GPIO pin) ADCx_IN16 */ +#define ADC_CHANNEL_17 (LL_ADC_CHANNEL_17) /*!< External channel (GPIO pin) ADCx_IN17 */ +#define ADC_CHANNEL_18 (LL_ADC_CHANNEL_18) /*!< External channel (GPIO pin) ADCx_IN18 */ +#define ADC_CHANNEL_VREFINT (LL_ADC_CHANNEL_VREFINT) /*!< Internal channel VrefInt: Internal + voltage reference. */ +#define ADC_CHANNEL_TEMPSENSOR (LL_ADC_CHANNEL_TEMPSENSOR) /*!< Internal channel Temperature sensor. */ +#define ADC_CHANNEL_VBAT (LL_ADC_CHANNEL_VBAT) /*!< Internal channel Vbat/3: Vbat voltage + through a divider ladder of factor 1/3 to have channel voltage always below + Vdda. */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_AWD_NUMBER Analog watchdog - ADC analog watchdog (AWD) number + * @{ + */ +#define ADC_ANALOGWATCHDOG_1 (LL_ADC_AWD1) /*!< ADC analog watchdog number 1 */ +#define ADC_ANALOGWATCHDOG_2 (LL_ADC_AWD2) /*!< ADC analog watchdog number 2 */ +#define ADC_ANALOGWATCHDOG_3 (LL_ADC_AWD3) /*!< ADC analog watchdog number 3 */ +/** + * @} + */ + +/** @defgroup ADC_analog_watchdog_mode ADC analog watchdog (AWD) mode + * @{ + */ +#define ADC_ANALOGWATCHDOG_NONE (0x00000000UL) /*!< ADC AWD not selected */ +#define ADC_ANALOGWATCHDOG_SINGLE_REG (ADC_CFGR1_AWD1SGL | ADC_CFGR1_AWD1EN) /*!< ADC AWD applied to a regular + group single channel */ +#define ADC_ANALOGWATCHDOG_ALL_REG (ADC_CFGR1_AWD1EN) /*!< ADC AWD applied to regular + group all channels */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_OVS_RATIO Oversampling - Ratio + * @{ + */ +/** + * @note The oversampling ratio is the number of ADC conversions performed, sum of these conversions data is computed + * to result as the ADC oversampling conversion data (before potential shift) + */ +#define ADC_OVERSAMPLING_RATIO_2 (LL_ADC_OVS_RATIO_2) /*!< ADC oversampling ratio 2 */ +#define ADC_OVERSAMPLING_RATIO_4 (LL_ADC_OVS_RATIO_4) /*!< ADC oversampling ratio 4 */ +#define ADC_OVERSAMPLING_RATIO_8 (LL_ADC_OVS_RATIO_8) /*!< ADC oversampling ratio 8 */ +#define ADC_OVERSAMPLING_RATIO_16 (LL_ADC_OVS_RATIO_16) /*!< ADC oversampling ratio 16 */ +#define ADC_OVERSAMPLING_RATIO_32 (LL_ADC_OVS_RATIO_32) /*!< ADC oversampling ratio 32 */ +#define ADC_OVERSAMPLING_RATIO_64 (LL_ADC_OVS_RATIO_64) /*!< ADC oversampling ratio 64 */ +#define ADC_OVERSAMPLING_RATIO_128 (LL_ADC_OVS_RATIO_128) /*!< ADC oversampling ratio 128 */ +#define ADC_OVERSAMPLING_RATIO_256 (LL_ADC_OVS_RATIO_256) /*!< ADC oversampling ratio 256 */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_OVS_SHIFT Oversampling - Data shift + * @{ + */ +/** + * @note The sum of the ADC conversions data is divided by "Rightbitshift" number to result as the ADC oversampling + * conversion data) + */ +#define ADC_RIGHTBITSHIFT_NONE (LL_ADC_OVS_SHIFT_NONE) /*!< ADC oversampling no shift */ +#define ADC_RIGHTBITSHIFT_1 (LL_ADC_OVS_SHIFT_RIGHT_1) /*!< ADC oversampling right shift of 1 ranks */ +#define ADC_RIGHTBITSHIFT_2 (LL_ADC_OVS_SHIFT_RIGHT_2) /*!< ADC oversampling right shift of 2 ranks */ +#define ADC_RIGHTBITSHIFT_3 (LL_ADC_OVS_SHIFT_RIGHT_3) /*!< ADC oversampling right shift of 3 ranks */ +#define ADC_RIGHTBITSHIFT_4 (LL_ADC_OVS_SHIFT_RIGHT_4) /*!< ADC oversampling right shift of 4 ranks */ +#define ADC_RIGHTBITSHIFT_5 (LL_ADC_OVS_SHIFT_RIGHT_5) /*!< ADC oversampling right shift of 5 ranks */ +#define ADC_RIGHTBITSHIFT_6 (LL_ADC_OVS_SHIFT_RIGHT_6) /*!< ADC oversampling right shift of 6 ranks */ +#define ADC_RIGHTBITSHIFT_7 (LL_ADC_OVS_SHIFT_RIGHT_7) /*!< ADC oversampling right shift of 7 ranks */ +#define ADC_RIGHTBITSHIFT_8 (LL_ADC_OVS_SHIFT_RIGHT_8) /*!< ADC oversampling right shift of 8 ranks */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_OVS_DISCONT_MODE Oversampling - Discontinuous mode + * @{ + */ +#define ADC_TRIGGEREDMODE_SINGLE_TRIGGER (LL_ADC_OVS_REG_CONT) /*!< ADC oversampling discontinuous mode: + continuous mode (all conversions of OVS ratio are done from 1 trigger) */ +#define ADC_TRIGGEREDMODE_MULTI_TRIGGER (LL_ADC_OVS_REG_DISCONT) /*!< ADC oversampling discontinuous mode: + discontinuous mode (each conversion of OVS ratio needs a trigger) */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_REG_TRIGGER_FREQ ADC group regular - Trigger frequency mode + * @{ + */ + +/** + * @note ADC trigger frequency mode must be set to low frequency when a duration is exceeded before ADC conversion + * start trigger event (between ADC enable and ADC conversion start trigger event or between two ADC conversion + * start trigger event). + * Duration value: Refer to device datasheet, parameter "tIdle". + */ +#define ADC_TRIGGER_FREQ_HIGH (LL_ADC_TRIGGER_FREQ_HIGH) /*!< Trigger frequency mode set to high frequency. */ +#define ADC_TRIGGER_FREQ_LOW (LL_ADC_TRIGGER_FREQ_LOW) /*!< Trigger frequency mode set to low frequency. */ +/** + * @} + */ + +/** @defgroup ADC_Event_type ADC Event type + * @{ + */ +/** + * @note Analog watchdog 1 is available on all stm32 series + * Analog watchdog 2 and 3 are not available on all series + */ +#define ADC_EOSMP_EVENT (ADC_FLAG_EOSMP) /*!< ADC End of Sampling event */ +#define ADC_AWD1_EVENT (ADC_FLAG_AWD1) /*!< ADC Analog watchdog 1 event (main analog watchdog) */ +#define ADC_AWD2_EVENT (ADC_FLAG_AWD2) /*!< ADC Analog watchdog 2 event (additional analog watchdog) */ +#define ADC_AWD3_EVENT (ADC_FLAG_AWD3) /*!< ADC Analog watchdog 3 event (additional analog watchdog) */ +#define ADC_OVR_EVENT (ADC_FLAG_OVR) /*!< ADC overrun event */ +/** + * @} + */ +#define ADC_AWD_EVENT ADC_AWD1_EVENT /*!< ADC Analog watchdog 1 event: Naming for compatibility + with other STM32 devices having only one analog watchdog */ + +/** @defgroup ADC_interrupts_definition ADC interrupts definition + * @{ + */ +#define ADC_IT_RDY ADC_IER_ADRDYIE /*!< ADC Ready interrupt source */ +#define ADC_IT_CCRDY ADC_IER_CCRDYIE /*!< ADC channel configuration ready interrupt source */ +#define ADC_IT_EOSMP ADC_IER_EOSMPIE /*!< ADC End of sampling interrupt source */ +#define ADC_IT_EOC ADC_IER_EOCIE /*!< ADC End of regular conversion interrupt source */ +#define ADC_IT_EOS ADC_IER_EOSIE /*!< ADC End of regular sequence of conversions interrupt source */ +#define ADC_IT_OVR ADC_IER_OVRIE /*!< ADC overrun interrupt source */ +#define ADC_IT_AWD1 ADC_IER_AWD1IE /*!< ADC Analog watchdog 1 interrupt source (main analog watchdog) */ +#define ADC_IT_AWD2 ADC_IER_AWD2IE /*!< ADC Analog watchdog 2 interrupt source (additional analog + watchdog) */ +#define ADC_IT_AWD3 ADC_IER_AWD3IE /*!< ADC Analog watchdog 3 interrupt source (additional analog + watchdog) */ +/** + * @} + */ + +/** @defgroup ADC_flags_definition ADC flags definition + * @{ + */ +#define ADC_FLAG_RDY ADC_ISR_ADRDY /*!< ADC Ready flag */ +#define ADC_FLAG_CCRDY ADC_ISR_CCRDY /*!< ADC channel configuration ready flag */ +#define ADC_FLAG_EOSMP ADC_ISR_EOSMP /*!< ADC End of Sampling flag */ +#define ADC_FLAG_EOC ADC_ISR_EOC /*!< ADC End of Regular Conversion flag */ +#define ADC_FLAG_EOS ADC_ISR_EOS /*!< ADC End of Regular sequence of Conversions flag */ +#define ADC_FLAG_OVR ADC_ISR_OVR /*!< ADC overrun flag */ +#define ADC_FLAG_AWD1 ADC_ISR_AWD1 /*!< ADC Analog watchdog 1 flag (main analog watchdog) */ +#define ADC_FLAG_AWD2 ADC_ISR_AWD2 /*!< ADC Analog watchdog 2 flag (additional analog watchdog) */ +#define ADC_FLAG_AWD3 ADC_ISR_AWD3 /*!< ADC Analog watchdog 3 flag (additional analog watchdog) */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup ADC_Private_Macros ADC Private Macros + * @{ + */ +/* Macro reserved for internal HAL driver usage, not intended to be used in */ +/* code of final user. */ + +/** + * @brief Test if conversion trigger of regular group is software start + * or external trigger. + * @param __HANDLE__ ADC handle + * @retval SET (software start) or RESET (external trigger) + */ +#define ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__) \ + (((__HANDLE__)->Instance->CFGR1 & ADC_CFGR1_EXTEN) == 0UL) + +/** + * @brief Return resolution bits in CFGR1 register RES[1:0] field. + * @param __HANDLE__ ADC handle + * @retval Value of bitfield RES in CFGR1 register. + */ +#define ADC_GET_RESOLUTION(__HANDLE__) \ + (LL_ADC_GetResolution((__HANDLE__)->Instance)) + +/** + * @brief Clear ADC error code (set it to no error code "HAL_ADC_ERROR_NONE"). + * @param __HANDLE__ ADC handle + * @retval None + */ +#define ADC_CLEAR_ERRORCODE(__HANDLE__) ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE) + +/** + * @brief Simultaneously clear and set specific bits of the handle State. + * @note ADC_STATE_CLR_SET() macro is merely aliased to generic macro MODIFY_REG(), + * the first parameter is the ADC handle State, the second parameter is the + * bit field to clear, the third and last parameter is the bit field to set. + * @retval None + */ +#define ADC_STATE_CLR_SET MODIFY_REG + +/** + * @brief Enable ADC discontinuous conversion mode for regular group + * @param _REG_DISCONTINUOUS_MODE_: Regular discontinuous mode. + * @retval None + */ +#define ADC_CFGR1_REG_DISCCONTINUOUS(_REG_DISCONTINUOUS_MODE_) \ + ((_REG_DISCONTINUOUS_MODE_) << 16U) + +/** + * @brief Enable the ADC auto off mode. + * @param _AUTOOFF_ Auto off bit enable or disable. + * @retval None + */ +#define ADC_CFGR1_AUTOOFF(_AUTOOFF_) \ + ((_AUTOOFF_) << 15U) + +/** + * @brief Enable the ADC auto delay mode. + * @param _AUTOWAIT_ Auto delay bit enable or disable. + * @retval None + */ +#define ADC_CFGR1_AUTOWAIT(_AUTOWAIT_) \ + ((_AUTOWAIT_) << 14U) + +/** + * @brief Enable ADC continuous conversion mode. + * @param _CONTINUOUS_MODE_ Continuous mode. + * @retval None + */ +#define ADC_CFGR1_CONTINUOUS(_CONTINUOUS_MODE_) \ + ((_CONTINUOUS_MODE_) << 13U) + +/** + * @brief Enable ADC overrun mode. + * @param _OVERRUN_MODE_ Overrun mode. + * @retval Overrun bit setting to be programmed into CFGR register + */ +/* Note: Bit ADC_CFGR1_OVRMOD not used directly in constant */ +/* "ADC_OVR_DATA_OVERWRITTEN" to have this case defined to 0x00, to set it */ +/* as the default case to be compliant with other STM32 devices. */ +#define ADC_CFGR1_OVERRUN(_OVERRUN_MODE_) \ + ( ( (_OVERRUN_MODE_) != (ADC_OVR_DATA_PRESERVED) \ + )? (ADC_CFGR1_OVRMOD) : (0x00000000UL) \ + ) + +/** + * @brief Set ADC scan mode with differentiation of sequencer setting + * fixed or configurable + * @param _SCAN_MODE_ Scan conversion mode. + * @retval None + */ +/* Note: Scan mode set using this macro (instead of parameter direct set) */ +/* due to different modes on other STM32 devices: */ +/* if scan mode is disabled, sequencer is set to fully configurable */ +/* with setting of only rank 1 enabled afterwards. */ +#define ADC_SCAN_SEQ_MODE(_SCAN_MODE_) \ + ( (((_SCAN_MODE_) & ADC_SCAN_SEQ_FIXED_INT) != 0UL \ + )? \ + ((_SCAN_MODE_) & (~ADC_SCAN_SEQ_FIXED_INT)) \ + : \ + (ADC_CFGR1_CHSELRMOD) \ + ) + +/** + * @brief Enable the ADC DMA continuous request. + * @param _DMACONTREQ_MODE_: DMA continuous request mode. + * @retval None + */ +#define ADC_CFGR1_DMACONTREQ(_DMACONTREQ_MODE_) \ + ((_DMACONTREQ_MODE_) << 1U) + +/** + * @brief Shift the AWD threshold in function of the selected ADC resolution. + * Thresholds have to be left-aligned on bit 11, the LSB (right bits) are set to 0. + * If resolution 12 bits, no shift. + * If resolution 10 bits, shift of 2 ranks on the left. + * If resolution 8 bits, shift of 4 ranks on the left. + * If resolution 6 bits, shift of 6 ranks on the left. + * therefore, shift = (12 - resolution) = 12 - (12- (((RES[1:0]) >> 3)*2)) + * @param __HANDLE__ ADC handle + * @param _Threshold_ Value to be shifted + * @retval None + */ +#define ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, _Threshold_) \ + ((_Threshold_) << ((((__HANDLE__)->Instance->CFGR1 & ADC_CFGR1_RES) >> 3U)*2U)) + +#define IS_ADC_CLOCKPRESCALER(ADC_CLOCK) (((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV1) ||\ + ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV2) ||\ + ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV4) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV1 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV2 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV4 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV6 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV8 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV10 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV12 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV16 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV32 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV64 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV128 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV256)) + +#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION_12B) || \ + ((RESOLUTION) == ADC_RESOLUTION_10B) || \ + ((RESOLUTION) == ADC_RESOLUTION_8B) || \ + ((RESOLUTION) == ADC_RESOLUTION_6B) ) + +#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \ + ((ALIGN) == ADC_DATAALIGN_LEFT) ) + +#define IS_ADC_SCAN_MODE(SCAN_MODE) (((SCAN_MODE) == ADC_SCAN_DISABLE) || \ + ((SCAN_MODE) == ADC_SCAN_ENABLE) || \ + ((SCAN_MODE) == ADC_SCAN_SEQ_FIXED) || \ + ((SCAN_MODE) == ADC_SCAN_SEQ_FIXED_BACKWARD) ) + +#define IS_ADC_EXTTRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \ + ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \ + ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \ + ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING) ) + +#if defined(TIM15) && defined(TIM6) && defined(TIM2) +#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIG_T1_TRGO2) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T1_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T2_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T3_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T6_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T15_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_EXT_IT11) || \ + ((REGTRIG) == ADC_SOFTWARE_START) ) +#elif defined(TIM15) && defined(TIM6) +#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIG_T1_TRGO2) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T1_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T3_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T6_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T15_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_EXT_IT11) || \ + ((REGTRIG) == ADC_SOFTWARE_START) ) +#elif defined(TIM2) +#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIG_T1_TRGO2) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T1_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T2_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T3_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_EXT_IT11) || \ + ((REGTRIG) == ADC_SOFTWARE_START) ) +#else +#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIG_T1_TRGO2) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T1_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T3_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_EXT_IT11) || \ + ((REGTRIG) == ADC_SOFTWARE_START) ) +#endif /* TIM15 && TIM6 && TIM2 */ + +#define IS_ADC_EOC_SELECTION(EOC_SELECTION) (((EOC_SELECTION) == ADC_EOC_SINGLE_CONV) || \ + ((EOC_SELECTION) == ADC_EOC_SEQ_CONV)) + +#define IS_ADC_OVERRUN(OVR) (((OVR) == ADC_OVR_DATA_PRESERVED) || \ + ((OVR) == ADC_OVR_DATA_OVERWRITTEN) ) + +#define IS_ADC_REGULAR_RANK_SEQ_FIXED(RANK) (((RANK) == ADC_RANK_CHANNEL_NUMBER) || \ + ((RANK) == ADC_RANK_NONE) ) + +#define IS_ADC_REGULAR_RANK(RANK) (((RANK) == ADC_REGULAR_RANK_1 ) || \ + ((RANK) == ADC_REGULAR_RANK_2 ) || \ + ((RANK) == ADC_REGULAR_RANK_3 ) || \ + ((RANK) == ADC_REGULAR_RANK_4 ) || \ + ((RANK) == ADC_REGULAR_RANK_5 ) || \ + ((RANK) == ADC_REGULAR_RANK_6 ) || \ + ((RANK) == ADC_REGULAR_RANK_7 ) || \ + ((RANK) == ADC_REGULAR_RANK_8 ) ) + +#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0) || \ + ((CHANNEL) == ADC_CHANNEL_1) || \ + ((CHANNEL) == ADC_CHANNEL_2) || \ + ((CHANNEL) == ADC_CHANNEL_3) || \ + ((CHANNEL) == ADC_CHANNEL_4) || \ + ((CHANNEL) == ADC_CHANNEL_5) || \ + ((CHANNEL) == ADC_CHANNEL_6) || \ + ((CHANNEL) == ADC_CHANNEL_7) || \ + ((CHANNEL) == ADC_CHANNEL_8) || \ + ((CHANNEL) == ADC_CHANNEL_9) || \ + ((CHANNEL) == ADC_CHANNEL_10) || \ + ((CHANNEL) == ADC_CHANNEL_11) || \ + ((CHANNEL) == ADC_CHANNEL_12) || \ + ((CHANNEL) == ADC_CHANNEL_13) || \ + ((CHANNEL) == ADC_CHANNEL_14) || \ + ((CHANNEL) == ADC_CHANNEL_15) || \ + ((CHANNEL) == ADC_CHANNEL_16) || \ + ((CHANNEL) == ADC_CHANNEL_17) || \ + ((CHANNEL) == ADC_CHANNEL_18) || \ + ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR) || \ + ((CHANNEL) == ADC_CHANNEL_VREFINT) || \ + ((CHANNEL) == ADC_CHANNEL_VBAT) ) + +#define IS_ADC_SAMPLING_TIME_COMMON(SAMPLING_TIME_COMMON) (((SAMPLING_TIME_COMMON) == ADC_SAMPLINGTIME_COMMON_1) || \ + ((SAMPLING_TIME_COMMON) == ADC_SAMPLINGTIME_COMMON_2) ) + +#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_1CYCLE_5) || \ + ((TIME) == ADC_SAMPLETIME_3CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_7CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_12CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_19CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_39CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_79CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_160CYCLES_5) ) + +#define IS_ADC_ANALOG_WATCHDOG_NUMBER(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_1) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_2) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_3) ) + +#define IS_ADC_ANALOG_WATCHDOG_MODE(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) ) + +#define IS_ADC_TRIGGER_FREQ(TRIGGER_FREQ) (((TRIGGER_FREQ) == LL_ADC_TRIGGER_FREQ_HIGH) || \ + ((TRIGGER_FREQ) == LL_ADC_TRIGGER_FREQ_LOW) ) + +#define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == ADC_EOSMP_EVENT) || \ + ((EVENT) == ADC_AWD1_EVENT) || \ + ((EVENT) == ADC_AWD2_EVENT) || \ + ((EVENT) == ADC_AWD3_EVENT) || \ + ((EVENT) == ADC_OVR_EVENT) ) + +/** + * @brief Verify that a given value is aligned with the ADC resolution range. + * @param __RESOLUTION__ ADC resolution (12, 10, 8 or 6 bits). + * @param __ADC_VALUE__ value checked against the resolution. + * @retval SET (__ADC_VALUE__ in line with __RESOLUTION__) or RESET (__ADC_VALUE__ not in line with __RESOLUTION__) + */ +#define IS_ADC_RANGE(__RESOLUTION__, __ADC_VALUE__) \ + ((__ADC_VALUE__) <= __LL_ADC_DIGITAL_SCALE(__RESOLUTION__)) + +/** @defgroup ADC_regular_nb_conv_verification ADC Regular Conversion Number Verification + * @{ + */ +#define IS_ADC_REGULAR_NB_CONV(LENGTH) (((LENGTH) >= 1UL) && ((LENGTH) <= 8UL)) +/** + * @} + */ + + +/* Private constants ---------------------------------------------------------*/ + +/** @defgroup ADC_Private_Constants ADC Private Constants + * @{ + */ + +/* Combination of all post-conversion flags bits: EOC/EOS, OVR, AWD */ +#define ADC_FLAG_POSTCONV_ALL (ADC_FLAG_AWD | ADC_FLAG_OVR | ADC_FLAG_EOS | ADC_FLAG_EOC) + +/* Internal definition to differentiate sequencer setting fixed or configurable */ +#define ADC_SCAN_SEQ_FIXED_INT 0x80000000U + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Macros ADC Exported Macros + * @{ + */ +/* Macro for internal HAL driver usage, and possibly can be used into code of */ +/* final user. */ + +/** @defgroup ADC_HAL_EM_HANDLE_IT_FLAG HAL ADC macro to manage HAL ADC handle, IT and flags. + * @{ + */ + +/** @brief Reset ADC handle state. + * @param __HANDLE__ ADC handle + * @retval None + */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \ + do{ \ + (__HANDLE__)->State = HAL_ADC_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \ + ((__HANDLE__)->State = HAL_ADC_STATE_RESET) +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @brief Enable ADC interrupt. + * @param __HANDLE__ ADC handle + * @param __INTERRUPT__ ADC Interrupt + * This parameter can be one of the following values: + * @arg @ref ADC_IT_RDY ADC Ready interrupt source + * @arg @ref ADC_IT_CCRDY ADC channel configuration ready interrupt source + * @arg @ref ADC_IT_EOSMP ADC End of Sampling interrupt source + * @arg @ref ADC_IT_EOC ADC End of Regular Conversion interrupt source + * @arg @ref ADC_IT_EOS ADC End of Regular sequence of Conversions interrupt source + * @arg @ref ADC_IT_OVR ADC overrun interrupt source + * @arg @ref ADC_IT_AWD1 ADC Analog watchdog 1 interrupt source (main analog watchdog) + * @arg @ref ADC_IT_AWD2 ADC Analog watchdog 2 interrupt source (additional analog watchdog) + * @arg @ref ADC_IT_AWD3 ADC Analog watchdog 3 interrupt source (additional analog watchdog) + * @retval None + */ +#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__)) + +/** + * @brief Disable ADC interrupt. + * @param __HANDLE__ ADC handle + * @param __INTERRUPT__ ADC Interrupt + * This parameter can be one of the following values: + * @arg @ref ADC_IT_RDY ADC Ready interrupt source + * @arg @ref ADC_IT_CCRDY ADC channel configuration ready interrupt source + * @arg @ref ADC_IT_EOSMP ADC End of Sampling interrupt source + * @arg @ref ADC_IT_EOC ADC End of Regular Conversion interrupt source + * @arg @ref ADC_IT_EOS ADC End of Regular sequence of Conversions interrupt source + * @arg @ref ADC_IT_OVR ADC overrun interrupt source + * @arg @ref ADC_IT_AWD1 ADC Analog watchdog 1 interrupt source (main analog watchdog) + * @arg @ref ADC_IT_AWD2 ADC Analog watchdog 2 interrupt source (additional analog watchdog) + * @arg @ref ADC_IT_AWD3 ADC Analog watchdog 3 interrupt source (additional analog watchdog) + * @retval None + */ +#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__)) + +/** @brief Checks if the specified ADC interrupt source is enabled or disabled. + * @param __HANDLE__ ADC handle + * @param __INTERRUPT__ ADC interrupt source to check + * This parameter can be one of the following values: + * @arg @ref ADC_IT_RDY ADC Ready interrupt source + * @arg @ref ADC_IT_CCRDY ADC channel configuration ready interrupt source + * @arg @ref ADC_IT_EOSMP ADC End of Sampling interrupt source + * @arg @ref ADC_IT_EOC ADC End of Regular Conversion interrupt source + * @arg @ref ADC_IT_EOS ADC End of Regular sequence of Conversions interrupt source + * @arg @ref ADC_IT_OVR ADC overrun interrupt source + * @arg @ref ADC_IT_AWD1 ADC Analog watchdog 1 interrupt source (main analog watchdog) + * @arg @ref ADC_IT_AWD2 ADC Analog watchdog 2 interrupt source (additional analog watchdog) + * @arg @ref ADC_IT_AWD3 ADC Analog watchdog 3 interrupt source (additional analog watchdog) + * @retval State of interruption (SET or RESET) + */ +#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @brief Check whether the specified ADC flag is set or not. + * @param __HANDLE__ ADC handle + * @param __FLAG__ ADC flag + * This parameter can be one of the following values: + * @arg @ref ADC_FLAG_RDY ADC Ready flag + * @arg @ref ADC_FLAG_CCRDY ADC channel configuration ready flag + * @arg @ref ADC_FLAG_EOSMP ADC End of Sampling flag + * @arg @ref ADC_FLAG_EOC ADC End of Regular Conversion flag + * @arg @ref ADC_FLAG_EOS ADC End of Regular sequence of Conversions flag + * @arg @ref ADC_FLAG_OVR ADC overrun flag + * @arg @ref ADC_FLAG_AWD1 ADC Analog watchdog 1 flag (main analog watchdog) + * @arg @ref ADC_FLAG_AWD2 ADC Analog watchdog 2 flag (additional analog watchdog) + * @arg @ref ADC_FLAG_AWD3 ADC Analog watchdog 3 flag (additional analog watchdog) + * @retval State of flag (TRUE or FALSE). + */ +#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) \ + ((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the specified ADC flag. + * @param __HANDLE__ ADC handle + * @param __FLAG__ ADC flag + * This parameter can be one of the following values: + * @arg @ref ADC_FLAG_RDY ADC Ready flag + * @arg @ref ADC_FLAG_CCRDY ADC channel configuration ready flag + * @arg @ref ADC_FLAG_EOSMP ADC End of Sampling flag + * @arg @ref ADC_FLAG_EOC ADC End of Regular Conversion flag + * @arg @ref ADC_FLAG_EOS ADC End of Regular sequence of Conversions flag + * @arg @ref ADC_FLAG_OVR ADC overrun flag + * @arg @ref ADC_FLAG_AWD1 ADC Analog watchdog 1 flag (main analog watchdog) + * @arg @ref ADC_FLAG_AWD2 ADC Analog watchdog 2 flag (additional analog watchdog) + * @arg @ref ADC_FLAG_AWD3 ADC Analog watchdog 3 flag (additional analog watchdog) + * @retval None + */ +/* Note: bit cleared bit by writing 1 (writing 0 has no effect on any bit of register ISR) */ +#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) \ + (((__HANDLE__)->Instance->ISR) = (__FLAG__)) + +/** + * @} + */ + +/** @defgroup ADC_HAL_EM_HELPER_MACRO HAL ADC helper macro + * @{ + */ + +/** + * @brief Helper macro to get ADC channel number in decimal format + * from literals ADC_CHANNEL_x. + * @note Example: + * __HAL_ADC_CHANNEL_TO_DECIMAL_NB(ADC_CHANNEL_4) + * will return decimal number "4". + * @note The input can be a value from functions where a channel + * number is returned, either defined with number + * or with bitfield (only one bit must be set). + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 + * @arg @ref ADC_CHANNEL_9 + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (1) + * @arg @ref ADC_CHANNEL_18 + * @arg @ref ADC_CHANNEL_VREFINT + * @arg @ref ADC_CHANNEL_TEMPSENSOR + * @arg @ref ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval Value between Min_Data=0 and Max_Data=18 + */ +#define __HAL_ADC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \ + __LL_ADC_CHANNEL_TO_DECIMAL_NB((__CHANNEL__)) + +/** + * @brief Helper macro to get ADC channel in literal format ADC_CHANNEL_x + * from number in decimal format. + * @note Example: + * __HAL_ADC_DECIMAL_NB_TO_CHANNEL(4) + * will return a data equivalent to "ADC_CHANNEL_4". + * @param __DECIMAL_NB__ Value between Min_Data=0 and Max_Data=18 + * @retval Returned value can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 + * @arg @ref ADC_CHANNEL_9 + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (1) + * @arg @ref ADC_CHANNEL_18 + * @arg @ref ADC_CHANNEL_VREFINT (2) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref ADC_CHANNEL_VBAT (2) + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + */ +#define __HAL_ADC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ + __LL_ADC_DECIMAL_NB_TO_CHANNEL((__DECIMAL_NB__)) + +/** + * @brief Helper macro to determine whether the selected channel + * corresponds to literal definitions of driver. + * @note The different literal definitions of ADC channels are: + * - ADC internal channel: + * ADC_CHANNEL_VREFINT, ADC_CHANNEL_TEMPSENSOR, ... + * - ADC external channel (channel connected to a GPIO pin): + * ADC_CHANNEL_1, ADC_CHANNEL_2, ... + * @note The channel parameter must be a value defined from literal + * definition of a ADC internal channel (ADC_CHANNEL_VREFINT, + * ADC_CHANNEL_TEMPSENSOR, ...), + * ADC external channel (ADC_CHANNEL_1, ADC_CHANNEL_2, ...), + * must not be a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 + * @arg @ref ADC_CHANNEL_9 + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (1) + * @arg @ref ADC_CHANNEL_18 + * @arg @ref ADC_CHANNEL_VREFINT + * @arg @ref ADC_CHANNEL_TEMPSENSOR + * @arg @ref ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval Value "0" if the channel corresponds to a parameter definition of a ADC external channel + * (channel connected to a GPIO pin). + * Value "1" if the channel corresponds to a parameter definition of a ADC internal channel. + */ +#define __HAL_ADC_IS_CHANNEL_INTERNAL(__CHANNEL__) \ + __LL_ADC_IS_CHANNEL_INTERNAL((__CHANNEL__)) + +/** + * @brief Helper macro to convert a channel defined from parameter + * definition of a ADC internal channel (ADC_CHANNEL_VREFINT, + * ADC_CHANNEL_TEMPSENSOR, ...), + * to its equivalent parameter definition of a ADC external channel + * (ADC_CHANNEL_1, ADC_CHANNEL_2, ...). + * @note The channel parameter can be, additionally to a value + * defined from parameter definition of a ADC internal channel + * (ADC_CHANNEL_VREFINT, ADC_CHANNEL_TEMPSENSOR, ...), + * a value defined from parameter definition of + * ADC external channel (ADC_CHANNEL_1, ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is returned + * from ADC registers. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 + * @arg @ref ADC_CHANNEL_9 + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (1) + * @arg @ref ADC_CHANNEL_18 + * @arg @ref ADC_CHANNEL_VREFINT + * @arg @ref ADC_CHANNEL_TEMPSENSOR + * @arg @ref ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval Returned value can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 + * @arg @ref ADC_CHANNEL_9 + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 + * @arg @ref ADC_CHANNEL_16 + * @arg @ref ADC_CHANNEL_17 + * @arg @ref ADC_CHANNEL_18 + */ +#define __HAL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(__CHANNEL__) \ + __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL((__CHANNEL__)) + +/** + * @brief Helper macro to determine whether the internal channel + * selected is available on the ADC instance selected. + * @note The channel parameter must be a value defined from parameter + * definition of a ADC internal channel (ADC_CHANNEL_VREFINT, + * ADC_CHANNEL_TEMPSENSOR, ...), + * must not be a value defined from parameter definition of + * ADC external channel (ADC_CHANNEL_1, ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __ADC_INSTANCE__ ADC instance + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_VREFINT + * @arg @ref ADC_CHANNEL_TEMPSENSOR + * @arg @ref ADC_CHANNEL_VBAT + * @retval Value "0" if the internal channel selected is not available on the ADC instance selected. + * Value "1" if the internal channel selected is available on the ADC instance selected. + */ +#define __HAL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE(__ADC_INSTANCE__, __CHANNEL__) \ + __LL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE((__ADC_INSTANCE__), (__CHANNEL__)) + +/** + * @brief Helper macro to select the ADC common instance + * to which is belonging the selected ADC instance. + * @note ADC common register instance can be used for: + * - Set parameters common to several ADC instances + * - Multimode (for devices with several ADC instances) + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @param __ADCx__ ADC instance + * @retval ADC common register instance + */ +#define __HAL_ADC_COMMON_INSTANCE(__ADCx__) \ + __LL_ADC_COMMON_INSTANCE((__ADCx__)) + +/** + * @brief Helper macro to check if all ADC instances sharing the same + * ADC common instance are disabled. + * @note This check is required by functions with setting conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @note On devices with only 1 ADC common instance, parameter of this macro + * is useless and can be ignored (parameter kept for compatibility + * with devices featuring several ADC common instances). + * @param __ADCXY_COMMON__ ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Value "0" if all ADC instances sharing the same ADC common instance + * are disabled. + * Value "1" if at least one ADC instance sharing the same ADC common instance + * is enabled. + */ +#define __HAL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__ADCXY_COMMON__) \ + __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE((__ADCXY_COMMON__)) + +/** + * @brief Helper macro to define the ADC conversion data full-scale digital + * value corresponding to the selected ADC resolution. + * @note ADC conversion data full-scale corresponds to voltage range + * determined by analog voltage references Vref+ and Vref- + * (refer to reference manual). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval ADC conversion data full-scale digital value + */ +#define __HAL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \ + __LL_ADC_DIGITAL_SCALE((__ADC_RESOLUTION__)) + +/** + * @brief Helper macro to convert the ADC conversion data from + * a resolution to another resolution. + * @param __DATA__ ADC conversion data to be converted + * @param __ADC_RESOLUTION_CURRENT__ Resolution of to the data to be converted + * This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @param __ADC_RESOLUTION_TARGET__ Resolution of the data after conversion + * This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval ADC conversion data to the requested resolution + */ +#define __HAL_ADC_CONVERT_DATA_RESOLUTION(__DATA__,\ + __ADC_RESOLUTION_CURRENT__,\ + __ADC_RESOLUTION_TARGET__) \ +__LL_ADC_CONVERT_DATA_RESOLUTION((__DATA__),\ + (__ADC_RESOLUTION_CURRENT__),\ + (__ADC_RESOLUTION_TARGET__)) + +/** + * @brief Helper macro to calculate the voltage (unit: mVolt) + * corresponding to a ADC conversion data (unit: digital value). + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __ADC_DATA__ ADC conversion data (resolution 12 bits) + * (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __HAL_ADC_CALC_DATA_TO_VOLTAGE(__VREFANALOG_VOLTAGE__,\ + __ADC_DATA__,\ + __ADC_RESOLUTION__) \ +__LL_ADC_CALC_DATA_TO_VOLTAGE((__VREFANALOG_VOLTAGE__),\ + (__ADC_DATA__),\ + (__ADC_RESOLUTION__)) + +/** + * @brief Helper macro to calculate analog reference voltage (Vref+) + * (unit: mVolt) from ADC conversion data of internal voltage + * reference VrefInt. + * @note Computation is using VrefInt calibration value + * stored in system memory for each device during production. + * @note This voltage depends on user board environment: voltage level + * connected to pin Vref+. + * On devices with small package, the pin Vref+ is not present + * and internally bonded to pin Vdda. + * @note On this STM32 series, calibration data of internal voltage reference + * VrefInt corresponds to a resolution of 12 bits, + * this is the recommended ADC resolution to convert voltage of + * internal voltage reference VrefInt. + * Otherwise, this macro performs the processing to scale + * ADC conversion data to 12 bits. + * @param __VREFINT_ADC_DATA__ ADC conversion data (resolution 12 bits) + * of internal voltage reference VrefInt (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval Analog reference voltage (unit: mV) + */ +#define __HAL_ADC_CALC_VREFANALOG_VOLTAGE(__VREFINT_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +__LL_ADC_CALC_VREFANALOG_VOLTAGE((__VREFINT_ADC_DATA__),\ + (__ADC_RESOLUTION__)) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor calibration values + * stored in system memory for each device during production. + * @note Calculation formula: + * Temperature = ((TS_ADC_DATA - TS_CAL1) + * * (TS_CAL2_TEMP - TS_CAL1_TEMP)) + * / (TS_CAL2 - TS_CAL1) + TS_CAL1_TEMP + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * Avg_Slope = (TS_CAL2 - TS_CAL1) + * / (TS_CAL2_TEMP - TS_CAL1_TEMP) + * TS_CAL1 = equivalent TS_ADC_DATA at temperature + * TEMP_DEGC_CAL1 (calibrated in factory) + * TS_CAL2 = equivalent TS_ADC_DATA at temperature + * TEMP_DEGC_CAL2 (calibrated in factory) + * Caution: Calculation relevancy under reserve that calibration + * parameters are correct (address and data). + * To calculate temperature using temperature sensor + * datasheet typical values (generic values less, therefore + * less accurate than calibrated values), + * use helper macro @ref __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(). + * @note As calculation input, the analog reference voltage (Vref+) must be + * defined as it impacts the ADC LSB equivalent voltage. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @note On this STM32 series, calibration data of temperature sensor + * corresponds to a resolution of 12 bits, + * this is the recommended ADC resolution to convert voltage of + * temperature sensor. + * Otherwise, this macro performs the processing to scale + * ADC conversion data to 12 bits. + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal + * temperature sensor (unit: digital value). + * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature + * sensor voltage has been measured. + * This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval Temperature (unit: degree Celsius) + */ +#define __HAL_ADC_CALC_TEMPERATURE(__VREFANALOG_VOLTAGE__,\ + __TEMPSENSOR_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +__LL_ADC_CALC_TEMPERATURE((__VREFANALOG_VOLTAGE__),\ + (__TEMPSENSOR_ADC_DATA__),\ + (__ADC_RESOLUTION__)) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor typical values + * (refer to device datasheet). + * @note Calculation formula: + * Temperature = (TS_TYP_CALx_VOLT(uV) - TS_ADC_DATA * Conversion_uV) + * / Avg_Slope + CALx_TEMP + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * (unit: digital value) + * Avg_Slope = temperature sensor slope + * (unit: uV/Degree Celsius) + * TS_TYP_CALx_VOLT = temperature sensor digital value at + * temperature CALx_TEMP (unit: mV) + * Caution: Calculation relevancy under reserve the temperature sensor + * of the current device has characteristics in line with + * datasheet typical values. + * If temperature sensor calibration values are available on + * on this device (presence of macro __LL_ADC_CALC_TEMPERATURE()), + * temperature calculation will be more accurate using + * helper macro @ref __LL_ADC_CALC_TEMPERATURE(). + * @note As calculation input, the analog reference voltage (Vref+) must be + * defined as it impacts the ADC LSB equivalent voltage. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @note ADC measurement data must correspond to a resolution of 12bits + * (full scale digital value 4095). If not the case, the data must be + * preliminarily rescaled to an equivalent resolution of 12 bits. + * @param __TEMPSENSOR_TYP_AVGSLOPE__ Device datasheet data: Temperature sensor slope typical value + (unit: uV/DegCelsius). + * On STM32G0, refer to device datasheet parameter "Avg_Slope". + * @param __TEMPSENSOR_TYP_CALX_V__ Device datasheet data: Temperature sensor voltage typical value (at + temperature and Vref+ defined in parameters below) (unit: mV). + * On STM32G0, refer to device datasheet parameter "V30" + (corresponding to TS_CAL1). + * @param __TEMPSENSOR_CALX_TEMP__ Device datasheet data: Temperature at which temperature sensor voltage (see + parameter above) is corresponding (unit: mV) + * @param __VREFANALOG_VOLTAGE__ Analog voltage reference (Vref+) voltage (unit: mV) + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal temperature sensor (unit: digital value). + * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature sensor voltage has been measured. + * This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval Temperature (unit: degree Celsius) + */ +#define __HAL_ADC_CALC_TEMPERATURE_TYP_PARAMS(__TEMPSENSOR_TYP_AVGSLOPE__,\ + __TEMPSENSOR_TYP_CALX_V__,\ + __TEMPSENSOR_CALX_TEMP__,\ + __VREFANALOG_VOLTAGE__,\ + __TEMPSENSOR_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +__LL_ADC_CALC_TEMPERATURE_TYP_PARAMS((__TEMPSENSOR_TYP_AVGSLOPE__),\ + (__TEMPSENSOR_TYP_CALX_V__),\ + (__TEMPSENSOR_CALX_TEMP__),\ + (__VREFANALOG_VOLTAGE__),\ + (__TEMPSENSOR_ADC_DATA__),\ + (__ADC_RESOLUTION__)) + +/** + * @} + */ + +/** + * @} + */ + +/* Include ADC HAL Extended module */ +#include "stm32g0xx_hal_adc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADC_Exported_Functions + * @{ + */ + +/** @addtogroup ADC_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc); +void HAL_ADC_MspInit(ADC_HandleTypeDef *hadc); +void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc); + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, + pADC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup ADC_Exported_Functions_Group2 + * @brief IO operation functions + * @{ + */ +/* IO operation functions *****************************************************/ + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout); +HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef *hadc, uint32_t EventType, uint32_t Timeout); + +/* Non-blocking mode: Interruption */ +HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef *hadc); + +/* Non-blocking mode: DMA */ +HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length); +HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef *hadc); + +/* ADC retrieve conversion value intended to be used with polling or interruption */ +uint32_t HAL_ADC_GetValue(const ADC_HandleTypeDef *hadc); + +/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption and DMA) */ +void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc); +void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef *hadc); +void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef *hadc); +void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef *hadc); +void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc); +/** + * @} + */ + +/** @addtogroup ADC_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, const ADC_ChannelConfTypeDef *pConfig); +HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, + const ADC_AnalogWDGConfTypeDef *pAnalogWDGConfig); + +/** + * @} + */ + +/* Peripheral State functions *************************************************/ +/** @addtogroup ADC_Exported_Functions_Group4 + * @{ + */ +uint32_t HAL_ADC_GetState(const ADC_HandleTypeDef *hadc); +uint32_t HAL_ADC_GetError(const ADC_HandleTypeDef *hadc); + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef *hadc); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32G0xx_HAL_ADC_H */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc_ex.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc_ex.h new file mode 100644 index 0000000..b555431 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc_ex.h @@ -0,0 +1,186 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_adc_ex.h + * @author MCD Application Team + * @brief Header file of ADC HAL extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_ADC_EX_H +#define STM32G0xx_HAL_ADC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup ADCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup ADCEx_Exported_Types ADC Extended Exported Types + * @{ + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup ADCEx_Exported_Constants ADC Extended Exported Constants + * @{ + */ + +/** @defgroup ADC_HAL_EC_GROUPS ADC instance - Groups + * @{ + */ +#define ADC_REGULAR_GROUP (LL_ADC_GROUP_REGULAR) /*!< ADC group regular (available on + all STM32 devices) */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/** @defgroup ADCEx_Private_Macro_internal_HAL_driver ADC Extended Private Macros + * @{ + */ +/* Macro reserved for internal HAL driver usage, not intended to be used in */ +/* code of final user. */ + +/** + * @brief Check whether or not ADC is independent. + * @param __HANDLE__ ADC handle. + * @note When multimode feature is not available, the macro always returns SET. + * @retval SET (ADC is independent) or RESET (ADC is not). + */ +#define ADC_IS_INDEPENDENT(__HANDLE__) (SET) + + +/** + * @brief Calibration factor size verification (7 bits maximum). + * @param __CALIBRATION_FACTOR__ Calibration factor value. + * @retval SET (__CALIBRATION_FACTOR__ is within the authorized size) or RESET (__CALIBRATION_FACTOR__ is too large) + */ +#define IS_ADC_CALFACT(__CALIBRATION_FACTOR__) ((__CALIBRATION_FACTOR__) <= (0x7FU)) + +/** + * @brief Verify the ADC oversampling ratio. + * @param __RATIO__ programmed ADC oversampling ratio. + * @retval SET (__RATIO__ is a valid value) or RESET (__RATIO__ is invalid) + */ +#define IS_ADC_OVERSAMPLING_RATIO(__RATIO__) (((__RATIO__) == ADC_OVERSAMPLING_RATIO_2 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_4 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_8 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_16 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_32 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_64 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_128 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_256 )) + +/** + * @brief Verify the ADC oversampling shift. + * @param __SHIFT__ programmed ADC oversampling shift. + * @retval SET (__SHIFT__ is a valid value) or RESET (__SHIFT__ is invalid) + */ +#define IS_ADC_RIGHT_BIT_SHIFT(__SHIFT__) (((__SHIFT__) == ADC_RIGHTBITSHIFT_NONE) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_1 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_2 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_3 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_4 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_5 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_6 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_7 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_8 )) + +/** + * @brief Verify the ADC oversampling triggered mode. + * @param __MODE__ programmed ADC oversampling triggered mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_ADC_TRIGGERED_OVERSAMPLING_MODE(__MODE__) (((__MODE__) == ADC_TRIGGEREDMODE_SINGLE_TRIGGER) || \ + ((__MODE__) == ADC_TRIGGEREDMODE_MULTI_TRIGGER) ) + + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADCEx_Exported_Functions + * @{ + */ + +/** @addtogroup ADCEx_Exported_Functions_Group1 + * @{ + */ +/* IO operation functions *****************************************************/ + +/* ADC calibration */ +HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef *hadc); +uint32_t HAL_ADCEx_Calibration_GetValue(const ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32_t CalibrationFactor); + +/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */ +void HAL_ADCEx_LevelOutOfWindow2Callback(ADC_HandleTypeDef *hadc); +void HAL_ADCEx_LevelOutOfWindow3Callback(ADC_HandleTypeDef *hadc); +void HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef *hadc); +void HAL_ADCEx_ChannelConfigReadyCallback(ADC_HandleTypeDef *hadc); + +/** + * @} + */ + +/** @addtogroup ADCEx_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef *hadc); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_ADC_EX_H */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cortex.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cortex.h new file mode 100644 index 0000000..9a7e9a3 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cortex.h @@ -0,0 +1,387 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_CORTEX_H +#define STM32G0xx_HAL_CORTEX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup CORTEX CORTEX + * @brief CORTEX HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Types CORTEX Exported Types + * @{ + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition + * @brief MPU Region initialization structure + * @{ + */ +typedef struct +{ + uint8_t Enable; /*!< Specifies the status of the region. + This parameter can be a value of @ref CORTEX_MPU_Region_Enable */ + uint8_t Number; /*!< Specifies the number of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Number */ + uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. + */ + uint8_t Size; /*!< Specifies the size of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Size */ + uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + uint8_t TypeExtField; /*!< Specifies the TEX field level. + This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */ + uint8_t AccessPermission; /*!< Specifies the region access permission type. + This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */ + uint8_t DisableExec; /*!< Specifies the instruction access status. + This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */ + uint8_t IsShareable; /*!< Specifies the shareability status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */ + uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected. + This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */ + uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */ +} MPU_Region_InitTypeDef; +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick clock source + * @{ + */ +#define SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U +#define SYSTICK_CLKSOURCE_HCLK 0x00000004U + +/** + * @} + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control CORTEX MPU HFNMI and PRIVILEGED Access control + * @{ + */ +#define MPU_HFNMI_PRIVDEF_NONE 0x00000000U +#define MPU_HARDFAULT_NMI (MPU_CTRL_HFNMIENA_Msk) +#define MPU_PRIVILEGED_DEFAULT (MPU_CTRL_PRIVDEFENA_Msk) +#define MPU_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable + * @{ + */ +#define MPU_REGION_ENABLE ((uint8_t)0x01) +#define MPU_REGION_DISABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access + * @{ + */ +#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00) +#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable + * @{ + */ +#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable + * @{ + */ +#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable + * @{ + */ +#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_TEX_Levels CORTEX MPU TEX Levels + * @{ + */ +#define MPU_TEX_LEVEL0 ((uint8_t)0x00) +#define MPU_TEX_LEVEL1 ((uint8_t)0x01) +#define MPU_TEX_LEVEL2 ((uint8_t)0x02) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size + * @{ + */ +#define MPU_REGION_SIZE_256B ((uint8_t)0x07) +#define MPU_REGION_SIZE_512B ((uint8_t)0x08) +#define MPU_REGION_SIZE_1KB ((uint8_t)0x09) +#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A) +#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B) +#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C) +#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D) +#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E) +#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F) +#define MPU_REGION_SIZE_128KB ((uint8_t)0x10) +#define MPU_REGION_SIZE_256KB ((uint8_t)0x11) +#define MPU_REGION_SIZE_512KB ((uint8_t)0x12) +#define MPU_REGION_SIZE_1MB ((uint8_t)0x13) +#define MPU_REGION_SIZE_2MB ((uint8_t)0x14) +#define MPU_REGION_SIZE_4MB ((uint8_t)0x15) +#define MPU_REGION_SIZE_8MB ((uint8_t)0x16) +#define MPU_REGION_SIZE_16MB ((uint8_t)0x17) +#define MPU_REGION_SIZE_32MB ((uint8_t)0x18) +#define MPU_REGION_SIZE_64MB ((uint8_t)0x19) +#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A) +#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B) +#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C) +#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D) +#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E) +#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes + * @{ + */ +#define MPU_REGION_NO_ACCESS ((uint8_t)0x00) +#define MPU_REGION_PRIV_RW ((uint8_t)0x01) +#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02) +#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03) +#define MPU_REGION_PRIV_RO ((uint8_t)0x05) +#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number + * @{ + */ +#define MPU_REGION_NUMBER0 ((uint8_t)0x00) +#define MPU_REGION_NUMBER1 ((uint8_t)0x01) +#define MPU_REGION_NUMBER2 ((uint8_t)0x02) +#define MPU_REGION_NUMBER3 ((uint8_t)0x03) +#define MPU_REGION_NUMBER4 ((uint8_t)0x04) +#define MPU_REGION_NUMBER5 ((uint8_t)0x05) +#define MPU_REGION_NUMBER6 ((uint8_t)0x06) +#define MPU_REGION_NUMBER7 ((uint8_t)0x07) +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Macros CORTEX Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions + * @{ + */ + +/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * @{ + */ +/* Initialization and Configuration functions *****************************/ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority); +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); +void HAL_NVIC_SystemReset(void); +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); +/** + * @} + */ + +/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions + * @brief Cortex control functions + * @{ + */ +/* Peripheral Control functions *************************************************/ +uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn); +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource); +void HAL_SYSTICK_IRQHandler(void); +void HAL_SYSTICK_Callback(void); + +#if (__MPU_PRESENT == 1U) +void HAL_MPU_Enable(uint32_t MPU_Control); +void HAL_MPU_Disable(void); +void HAL_MPU_EnableRegion(uint32_t RegionNumber); +void HAL_MPU_DisableRegion(uint32_t RegionNumber); +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init); +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CORTEX_Private_Macros CORTEX Private Macros + * @{ + */ +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x4U) + +#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) > SysTick_IRQn) + +#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \ + ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8)) + +#if (__MPU_PRESENT == 1) +#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \ + ((STATE) == MPU_REGION_DISABLE)) + +#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \ + ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE)) + +#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \ + ((STATE) == MPU_ACCESS_NOT_SHAREABLE)) + +#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \ + ((STATE) == MPU_ACCESS_NOT_CACHEABLE)) + +#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \ + ((STATE) == MPU_ACCESS_NOT_BUFFERABLE)) + +#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \ + ((TYPE) == MPU_TEX_LEVEL1) || \ + ((TYPE) == MPU_TEX_LEVEL2)) + +#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RW) || \ + ((TYPE) == MPU_REGION_PRIV_RW_URO) || \ + ((TYPE) == MPU_REGION_FULL_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RO) || \ + ((TYPE) == MPU_REGION_PRIV_RO_URO)) + +#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \ + ((NUMBER) == MPU_REGION_NUMBER1) || \ + ((NUMBER) == MPU_REGION_NUMBER2) || \ + ((NUMBER) == MPU_REGION_NUMBER3) || \ + ((NUMBER) == MPU_REGION_NUMBER4) || \ + ((NUMBER) == MPU_REGION_NUMBER5) || \ + ((NUMBER) == MPU_REGION_NUMBER6) || \ + ((NUMBER) == MPU_REGION_NUMBER7)) + +#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_256B) || \ + ((SIZE) == MPU_REGION_SIZE_512B) || \ + ((SIZE) == MPU_REGION_SIZE_1KB) || \ + ((SIZE) == MPU_REGION_SIZE_2KB) || \ + ((SIZE) == MPU_REGION_SIZE_4KB) || \ + ((SIZE) == MPU_REGION_SIZE_8KB) || \ + ((SIZE) == MPU_REGION_SIZE_16KB) || \ + ((SIZE) == MPU_REGION_SIZE_32KB) || \ + ((SIZE) == MPU_REGION_SIZE_64KB) || \ + ((SIZE) == MPU_REGION_SIZE_128KB) || \ + ((SIZE) == MPU_REGION_SIZE_256KB) || \ + ((SIZE) == MPU_REGION_SIZE_512KB) || \ + ((SIZE) == MPU_REGION_SIZE_1MB) || \ + ((SIZE) == MPU_REGION_SIZE_2MB) || \ + ((SIZE) == MPU_REGION_SIZE_4MB) || \ + ((SIZE) == MPU_REGION_SIZE_8MB) || \ + ((SIZE) == MPU_REGION_SIZE_16MB) || \ + ((SIZE) == MPU_REGION_SIZE_32MB) || \ + ((SIZE) == MPU_REGION_SIZE_64MB) || \ + ((SIZE) == MPU_REGION_SIZE_128MB) || \ + ((SIZE) == MPU_REGION_SIZE_256MB) || \ + ((SIZE) == MPU_REGION_SIZE_512MB) || \ + ((SIZE) == MPU_REGION_SIZE_1GB) || \ + ((SIZE) == MPU_REGION_SIZE_2GB) || \ + ((SIZE) == MPU_REGION_SIZE_4GB)) + +#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FFU) +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_CORTEX_H */ + + + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_crc.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_crc.h new file mode 100644 index 0000000..0a4ddcc --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_crc.h @@ -0,0 +1,342 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_crc.h + * @author MCD Application Team + * @brief Header file of CRC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_CRC_H +#define STM32G0xx_HAL_CRC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup CRC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CRC_Exported_Types CRC Exported Types + * @{ + */ + +/** + * @brief CRC HAL State Structure definition + */ +typedef enum +{ + HAL_CRC_STATE_RESET = 0x00U, /*!< CRC not yet initialized or disabled */ + HAL_CRC_STATE_READY = 0x01U, /*!< CRC initialized and ready for use */ + HAL_CRC_STATE_BUSY = 0x02U, /*!< CRC internal process is ongoing */ + HAL_CRC_STATE_TIMEOUT = 0x03U, /*!< CRC timeout state */ + HAL_CRC_STATE_ERROR = 0x04U /*!< CRC error state */ +} HAL_CRC_StateTypeDef; + +/** + * @brief CRC Init Structure definition + */ +typedef struct +{ + uint8_t DefaultPolynomialUse; /*!< This parameter is a value of @ref CRC_Default_Polynomial and indicates if default polynomial is used. + If set to DEFAULT_POLYNOMIAL_ENABLE, resort to default + X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + + X^4 + X^2+ X +1. + In that case, there is no need to set GeneratingPolynomial field. + If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and + CRCLength fields must be set. */ + + uint8_t DefaultInitValueUse; /*!< This parameter is a value of @ref CRC_Default_InitValue_Use and indicates if default init value is used. + If set to DEFAULT_INIT_VALUE_ENABLE, resort to default + 0xFFFFFFFF value. In that case, there is no need to set InitValue field. If + otherwise set to DEFAULT_INIT_VALUE_DISABLE, InitValue field must be set. */ + + uint32_t GeneratingPolynomial; /*!< Set CRC generating polynomial as a 7, 8, 16 or 32-bit long value for a polynomial degree + respectively equal to 7, 8, 16 or 32. This field is written in normal, + representation e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 + is written 0x65. No need to specify it if DefaultPolynomialUse is set to + DEFAULT_POLYNOMIAL_ENABLE. */ + + uint32_t CRCLength; /*!< This parameter is a value of @ref CRC_Polynomial_Sizes and indicates CRC length. + Value can be either one of + @arg @ref CRC_POLYLENGTH_32B (32-bit CRC), + @arg @ref CRC_POLYLENGTH_16B (16-bit CRC), + @arg @ref CRC_POLYLENGTH_8B (8-bit CRC), + @arg @ref CRC_POLYLENGTH_7B (7-bit CRC). */ + + uint32_t InitValue; /*!< Init value to initiate CRC computation. No need to specify it if DefaultInitValueUse + is set to DEFAULT_INIT_VALUE_ENABLE. */ + + uint32_t InputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Input_Data_Inversion and specifies input data inversion mode. + Can be either one of the following values + @arg @ref CRC_INPUTDATA_INVERSION_NONE no input data inversion + @arg @ref CRC_INPUTDATA_INVERSION_BYTE byte-wise inversion, 0x1A2B3C4D + becomes 0x58D43CB2 + @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD halfword-wise inversion, + 0x1A2B3C4D becomes 0xD458B23C + @arg @ref CRC_INPUTDATA_INVERSION_WORD word-wise inversion, 0x1A2B3C4D + becomes 0xB23CD458 */ + + uint32_t OutputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Output_Data_Inversion and specifies output data (i.e. CRC) inversion mode. + Can be either + @arg @ref CRC_OUTPUTDATA_INVERSION_DISABLE no CRC inversion, + @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE CRC 0x11223344 is converted + into 0x22CC4488 */ +} CRC_InitTypeDef; + +/** + * @brief CRC Handle Structure definition + */ +typedef struct +{ + CRC_TypeDef *Instance; /*!< Register base address */ + + CRC_InitTypeDef Init; /*!< CRC configuration parameters */ + + HAL_LockTypeDef Lock; /*!< CRC Locking object */ + + __IO HAL_CRC_StateTypeDef State; /*!< CRC communication state */ + + uint32_t InputDataFormat; /*!< This parameter is a value of @ref CRC_Input_Buffer_Format and specifies input data format. + Can be either + @arg @ref CRC_INPUTDATA_FORMAT_BYTES input data is a stream of bytes + (8-bit data) + @arg @ref CRC_INPUTDATA_FORMAT_HALFWORDS input data is a stream of + half-words (16-bit data) + @arg @ref CRC_INPUTDATA_FORMAT_WORDS input data is a stream of words + (32-bit data) + + Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization + error must occur if InputBufferFormat is not one of the three values listed + above */ +} CRC_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRC_Exported_Constants CRC Exported Constants + * @{ + */ + +/** @defgroup CRC_Default_Polynomial_Value Default CRC generating polynomial + * @{ + */ +#define DEFAULT_CRC32_POLY 0x04C11DB7U /*!< X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1 */ +/** + * @} + */ + +/** @defgroup CRC_Default_InitValue Default CRC computation initialization value + * @{ + */ +#define DEFAULT_CRC_INITVALUE 0xFFFFFFFFU /*!< Initial CRC default value */ +/** + * @} + */ + +/** @defgroup CRC_Default_Polynomial Indicates whether or not default polynomial is used + * @{ + */ +#define DEFAULT_POLYNOMIAL_ENABLE ((uint8_t)0x00U) /*!< Enable default generating polynomial 0x04C11DB7 */ +#define DEFAULT_POLYNOMIAL_DISABLE ((uint8_t)0x01U) /*!< Disable default generating polynomial 0x04C11DB7 */ +/** + * @} + */ + +/** @defgroup CRC_Default_InitValue_Use Indicates whether or not default init value is used + * @{ + */ +#define DEFAULT_INIT_VALUE_ENABLE ((uint8_t)0x00U) /*!< Enable initial CRC default value */ +#define DEFAULT_INIT_VALUE_DISABLE ((uint8_t)0x01U) /*!< Disable initial CRC default value */ +/** + * @} + */ + +/** @defgroup CRC_Polynomial_Sizes Polynomial sizes to configure the peripheral + * @{ + */ +#define CRC_POLYLENGTH_32B 0x00000000U /*!< Resort to a 32-bit long generating polynomial */ +#define CRC_POLYLENGTH_16B CRC_CR_POLYSIZE_0 /*!< Resort to a 16-bit long generating polynomial */ +#define CRC_POLYLENGTH_8B CRC_CR_POLYSIZE_1 /*!< Resort to a 8-bit long generating polynomial */ +#define CRC_POLYLENGTH_7B CRC_CR_POLYSIZE /*!< Resort to a 7-bit long generating polynomial */ +/** + * @} + */ + +/** @defgroup CRC_Polynomial_Size_Definitions CRC polynomial possible sizes actual definitions + * @{ + */ +#define HAL_CRC_LENGTH_32B 32U /*!< 32-bit long CRC */ +#define HAL_CRC_LENGTH_16B 16U /*!< 16-bit long CRC */ +#define HAL_CRC_LENGTH_8B 8U /*!< 8-bit long CRC */ +#define HAL_CRC_LENGTH_7B 7U /*!< 7-bit long CRC */ +/** + * @} + */ + +/** @defgroup CRC_Input_Buffer_Format Input Buffer Format + * @{ + */ +/* WARNING: CRC_INPUT_FORMAT_UNDEFINED is created for reference purposes but + * an error is triggered in HAL_CRC_Init() if InputDataFormat field is set + * to CRC_INPUT_FORMAT_UNDEFINED: the format MUST be defined by the user for + * the CRC APIs to provide a correct result */ +#define CRC_INPUTDATA_FORMAT_UNDEFINED 0x00000000U /*!< Undefined input data format */ +#define CRC_INPUTDATA_FORMAT_BYTES 0x00000001U /*!< Input data in byte format */ +#define CRC_INPUTDATA_FORMAT_HALFWORDS 0x00000002U /*!< Input data in half-word format */ +#define CRC_INPUTDATA_FORMAT_WORDS 0x00000003U /*!< Input data in word format */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup CRC_Exported_Macros CRC Exported Macros + * @{ + */ + +/** @brief Reset CRC handle state. + * @param __HANDLE__ CRC handle. + * @retval None + */ +#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET) + +/** + * @brief Reset CRC Data Register. + * @param __HANDLE__ CRC handle + * @retval None + */ +#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET) + +/** + * @brief Set CRC INIT non-default value + * @param __HANDLE__ CRC handle + * @param __INIT__ 32-bit initial value + * @retval None + */ +#define __HAL_CRC_INITIALCRCVALUE_CONFIG(__HANDLE__, __INIT__) ((__HANDLE__)->Instance->INIT = (__INIT__)) + +/** + * @brief Store data in the Independent Data (ID) register. + * @param __HANDLE__ CRC handle + * @param __VALUE__ Value to be stored in the ID register + * @note Refer to the Reference Manual to get the authorized __VALUE__ length in bits + * @retval None + */ +#define __HAL_CRC_SET_IDR(__HANDLE__, __VALUE__) (WRITE_REG((__HANDLE__)->Instance->IDR, (__VALUE__))) + +/** + * @brief Return the data stored in the Independent Data (ID) register. + * @param __HANDLE__ CRC handle + * @note Refer to the Reference Manual to get the authorized __VALUE__ length in bits + * @retval Value of the ID register + */ +#define __HAL_CRC_GET_IDR(__HANDLE__) (((__HANDLE__)->Instance->IDR) & CRC_IDR_IDR) +/** + * @} + */ + + +/* Private macros --------------------------------------------------------*/ +/** @defgroup CRC_Private_Macros CRC Private Macros + * @{ + */ + +#define IS_DEFAULT_POLYNOMIAL(DEFAULT) (((DEFAULT) == DEFAULT_POLYNOMIAL_ENABLE) || \ + ((DEFAULT) == DEFAULT_POLYNOMIAL_DISABLE)) + +#define IS_DEFAULT_INIT_VALUE(VALUE) (((VALUE) == DEFAULT_INIT_VALUE_ENABLE) || \ + ((VALUE) == DEFAULT_INIT_VALUE_DISABLE)) + +#define IS_CRC_POL_LENGTH(LENGTH) (((LENGTH) == CRC_POLYLENGTH_32B) || \ + ((LENGTH) == CRC_POLYLENGTH_16B) || \ + ((LENGTH) == CRC_POLYLENGTH_8B) || \ + ((LENGTH) == CRC_POLYLENGTH_7B)) + +#define IS_CRC_INPUTDATA_FORMAT(FORMAT) (((FORMAT) == CRC_INPUTDATA_FORMAT_BYTES) || \ + ((FORMAT) == CRC_INPUTDATA_FORMAT_HALFWORDS) || \ + ((FORMAT) == CRC_INPUTDATA_FORMAT_WORDS)) + +/** + * @} + */ + +/* Include CRC HAL Extended module */ +#include "stm32g0xx_hal_crc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRC_Exported_Functions CRC Exported Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc); +HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc); +void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc); +void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc); +/** + * @} + */ + +/* Peripheral Control functions ***********************************************/ +/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions + * @{ + */ +uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength); +uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength); +/** + * @} + */ + +/* Peripheral State and Error functions ***************************************/ +/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions + * @{ + */ +HAL_CRC_StateTypeDef HAL_CRC_GetState(const CRC_HandleTypeDef *hcrc); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_CRC_H */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_crc_ex.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_crc_ex.h new file mode 100644 index 0000000..e9ecb8e --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_crc_ex.h @@ -0,0 +1,150 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_crc_ex.h + * @author MCD Application Team + * @brief Header file of CRC HAL extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_CRC_EX_H +#define STM32G0xx_HAL_CRC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup CRCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRCEx_Exported_Constants CRC Extended Exported Constants + * @{ + */ + +/** @defgroup CRCEx_Input_Data_Inversion Input Data Inversion Modes + * @{ + */ +#define CRC_INPUTDATA_INVERSION_NONE 0x00000000U /*!< No input data inversion */ +#define CRC_INPUTDATA_INVERSION_BYTE CRC_CR_REV_IN_0 /*!< Byte-wise input data inversion */ +#define CRC_INPUTDATA_INVERSION_HALFWORD CRC_CR_REV_IN_1 /*!< HalfWord-wise input data inversion */ +#define CRC_INPUTDATA_INVERSION_WORD CRC_CR_REV_IN /*!< Word-wise input data inversion */ +/** + * @} + */ + +/** @defgroup CRCEx_Output_Data_Inversion Output Data Inversion Modes + * @{ + */ +#define CRC_OUTPUTDATA_INVERSION_DISABLE 0x00000000U /*!< No output data inversion */ +#define CRC_OUTPUTDATA_INVERSION_ENABLE CRC_CR_REV_OUT /*!< Bit-wise output data inversion */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup CRCEx_Exported_Macros CRC Extended Exported Macros + * @{ + */ + +/** + * @brief Set CRC output reversal + * @param __HANDLE__ CRC handle + * @retval None + */ +#define __HAL_CRC_OUTPUTREVERSAL_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_REV_OUT) + +/** + * @brief Unset CRC output reversal + * @param __HANDLE__ CRC handle + * @retval None + */ +#define __HAL_CRC_OUTPUTREVERSAL_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(CRC_CR_REV_OUT)) + +/** + * @brief Set CRC non-default polynomial + * @param __HANDLE__ CRC handle + * @param __POLYNOMIAL__ 7, 8, 16 or 32-bit polynomial + * @retval None + */ +#define __HAL_CRC_POLYNOMIAL_CONFIG(__HANDLE__, __POLYNOMIAL__) ((__HANDLE__)->Instance->POL = (__POLYNOMIAL__)) + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup CRCEx_Private_Macros CRC Extended Private Macros + * @{ + */ + +#define IS_CRC_INPUTDATA_INVERSION_MODE(MODE) (((MODE) == CRC_INPUTDATA_INVERSION_NONE) || \ + ((MODE) == CRC_INPUTDATA_INVERSION_BYTE) || \ + ((MODE) == CRC_INPUTDATA_INVERSION_HALFWORD) || \ + ((MODE) == CRC_INPUTDATA_INVERSION_WORD)) + +#define IS_CRC_OUTPUTDATA_INVERSION_MODE(MODE) (((MODE) == CRC_OUTPUTDATA_INVERSION_DISABLE) || \ + ((MODE) == CRC_OUTPUTDATA_INVERSION_ENABLE)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup CRCEx_Exported_Functions + * @{ + */ + +/** @addtogroup CRCEx_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength); +HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode); +HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_CRC_EX_H */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_def.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_def.h new file mode 100644 index 0000000..3f5d08f --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_def.h @@ -0,0 +1,215 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_def.h + * @author MCD Application Team + * @brief This file contains HAL common defines, enumeration, macros and + * structures definitions. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_DEF +#define STM32G0xx_HAL_DEF + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" +#include "Legacy/stm32_hal_legacy.h" /* Aliases file for old names compatibility */ +#include + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief HAL Status structures definition + */ +typedef enum +{ + HAL_OK = 0x00U, + HAL_ERROR = 0x01U, + HAL_BUSY = 0x02U, + HAL_TIMEOUT = 0x03U +} HAL_StatusTypeDef; + +/** + * @brief HAL Lock structures definition + */ +typedef enum +{ + HAL_UNLOCKED = 0x00U, + HAL_LOCKED = 0x01U +} HAL_LockTypeDef; + +/* Exported macros -----------------------------------------------------------*/ + +#if !defined(UNUSED) +#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */ +#endif /* UNUSED */ + +#define HAL_MAX_DELAY 0xFFFFFFFFU + +#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT)) +#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) + +#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ + do{ \ + (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ + (__DMA_HANDLE__).Parent = (__HANDLE__); \ + } while(0U) + +/** @brief Reset the Handles State field. + * @param __HANDLE__ specifies the Peripheral Handle. + * @note This macro can be used for the following purpose: + * - When the Handle is declared as local variable; before passing it as parameter + * to HAL_PPP_Init() for the first time, it is mandatory to use this macro + * to set to 0 the Handles "State" field. + * Otherwise, "State" field may have any random value and the first time the function + * HAL_PPP_Init() is called, the low level hardware initialization will be missed + * (i.e. HAL_PPP_MspInit() will not be executed). + * - When there is a need to reconfigure the low level hardware: instead of calling + * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). + * In this later function, when the Handles "State" field is set to 0, it will execute the function + * HAL_PPP_MspInit() which will reconfigure the low level hardware. + * @retval None + */ +#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U) + +#if (USE_RTOS == 1U) +/* Reserved for future use */ +#error " USE_RTOS should be 0 in the current HAL release " +#else +#define __HAL_LOCK(__HANDLE__) \ + do{ \ + if((__HANDLE__)->Lock == HAL_LOCKED) \ + { \ + return HAL_BUSY; \ + } \ + else \ + { \ + (__HANDLE__)->Lock = HAL_LOCKED; \ + } \ + }while (0U) + +#define __HAL_UNLOCK(__HANDLE__) \ + do{ \ + (__HANDLE__)->Lock = HAL_UNLOCKED; \ + }while (0U) +#endif /* USE_RTOS */ + +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #ifndef __weak + #define __weak __attribute__((weak)) + #endif /* __weak */ + #ifndef __packed + #define __packed __attribute__((packed)) + #endif /* __packed */ +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ +#ifndef __weak +#define __weak __attribute__((weak)) +#endif /* __weak */ +#ifndef __packed +#define __packed __attribute__((__packed__)) +#endif /* __packed */ +#endif /* __GNUC__ */ + + +/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ +/* GNU Compiler */ +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif /* __ALIGN_BEGIN */ + #ifndef __ALIGN_END + #define __ALIGN_END __attribute__ ((aligned (4))) + #endif /* __ALIGN_END */ +#elif defined (__GNUC__) && !defined (__CC_ARM) /* GNU Compiler */ +#ifndef __ALIGN_END +#define __ALIGN_END __attribute__ ((aligned (4U))) +#endif /* __ALIGN_END */ +#ifndef __ALIGN_BEGIN +#define __ALIGN_BEGIN +#endif /* __ALIGN_BEGIN */ +#else +#ifndef __ALIGN_END +#define __ALIGN_END +#endif /* __ALIGN_END */ +#ifndef __ALIGN_BEGIN +/* ARM Compiler */ +#if defined (__CC_ARM) /* ARM Compiler V5 */ +#define __ALIGN_BEGIN __align(4U) +/* IAR Compiler */ +#elif defined (__ICCARM__) +#define __ALIGN_BEGIN +#endif /* __CC_ARM */ +#endif /* __ALIGN_BEGIN */ +#endif /* __GNUC__ */ + +/** + * @brief __RAM_FUNC definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) +/* ARM Compiler V4/V5 and V6 + -------------------------- + RAM functions are defined using the toolchain options. + Functions that are executed in RAM should reside in a separate source module. + Using the 'Options for File' dialog you can simply change the 'Code / Const' + area of a module to a memory space in physical RAM. + Available memory areas are declared in the 'Target' tab of the 'Options for Target' + dialog. +*/ +#define __RAM_FUNC + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- + RAM functions are defined using a specific toolchain keyword "__ramfunc". +*/ +#define __RAM_FUNC __ramfunc + +#elif defined ( __GNUC__ ) +/* GNU Compiler + ------------ + RAM functions are defined using a specific toolchain attribute + "__attribute__((section(".RamFunc")))". +*/ +#define __RAM_FUNC __attribute__((section(".RamFunc"))) + +#endif /* __CC_ARM || __ARMCC_VERSION */ + +/** + * @brief __NOINLINE definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ ) +/* ARM V4/V5 and V6 & GNU Compiler + ------------------------------- +*/ +#define __NOINLINE __attribute__ ( (noinline) ) + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- +*/ +#define __NOINLINE _Pragma("optimize = no_inline") + +#endif /* __CC_ARM || __ARMCC_VERSION */ + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_DEF */ + + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma.h new file mode 100644 index 0000000..0ab6528 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma.h @@ -0,0 +1,803 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_dma.h + * @author MCD Application Team + * @brief Header file of DMA HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_DMA_H +#define STM32G0xx_HAL_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" +#include "stm32g0xx_ll_dma.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DMA_Exported_Types DMA Exported Types + * @{ + */ + +/** + * @brief DMA Configuration Structure definition + */ +typedef struct +{ + uint32_t Request; /*!< Specifies the request selected for the specified channel. + This parameter can be a value of @ref DMA_request */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_Data_transfer_direction */ + + uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. + This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ + + uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. + This parameter can be a value of @ref DMA_Memory_incremented_mode */ + + uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_Peripheral_data_size */ + + uint32_t MemDataAlignment; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_Memory_data_size */ + + uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx. + This parameter can be a value of @ref DMA_mode + @note The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Channel */ + + uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx. + This parameter can be a value of @ref DMA_Priority_level */ +} DMA_InitTypeDef; + +/** + * @brief HAL DMA State structures definition + */ +typedef enum +{ + HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ + HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ + HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ + HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */ +} HAL_DMA_StateTypeDef; + +/** + * @brief HAL DMA Error Code structure definition + */ +typedef enum +{ + HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ + HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */ +} HAL_DMA_LevelCompleteTypeDef; + +/** + * @brief HAL DMA Callback ID structure definition + */ +typedef enum +{ + HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ + HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */ + HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */ + HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */ + HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */ + +} HAL_DMA_CallbackIDTypeDef; + +/** + * @brief DMA handle Structure definition + */ +typedef struct __DMA_HandleTypeDef +{ + DMA_Channel_TypeDef *Instance; /*!< Register base address */ + + DMA_InitTypeDef Init; /*!< DMA communication parameters */ + + HAL_LockTypeDef Lock; /*!< DMA locking object */ + + __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ + + void *Parent; /*!< Parent object state */ + + void (* XferCpltCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer complete callback */ + + void (* XferHalfCpltCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA Half transfer complete callback */ + + void (* XferErrorCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer error callback */ + + void (* XferAbortCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer abort callback */ + + __IO uint32_t ErrorCode; /*!< DMA Error code */ + +#if defined(DMA2) + DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */ + +#endif /* DMA2 */ + uint32_t ChannelIndex; /*!< DMA Channel Index */ + + DMAMUX_Channel_TypeDef *DMAmuxChannel; /*!< Register base address */ + + DMAMUX_ChannelStatus_TypeDef *DMAmuxChannelStatus; /*!< DMAMUX Channels Status Base Address */ + + uint32_t DMAmuxChannelStatusMask; /*!< DMAMUX Channel Status Mask */ + + DMAMUX_RequestGen_TypeDef *DMAmuxRequestGen; /*!< DMAMUX request generator Base Address */ + + DMAMUX_RequestGenStatus_TypeDef *DMAmuxRequestGenStatus; /*!< DMAMUX request generator Address */ + + uint32_t DMAmuxRequestGenStatusMask; /*!< DMAMUX request generator Status mask */ +} DMA_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Constants DMA Exported Constants + * @{ + */ + +/** @defgroup DMA_Error_Code DMA Error Code + * @{ + */ +#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */ +#define HAL_DMA_ERROR_NO_XFER 0x00000004U /*!< Abort requested with no Xfer ongoing */ +#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */ +#define HAL_DMA_ERROR_PARAM 0x00000040U /*!< Parameter error */ +#define HAL_DMA_ERROR_BUSY 0x00000080U /*!< DMA Busy error */ +#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */ +#define HAL_DMA_ERROR_SYNC 0x00000200U /*!< DMAMUX sync overrun error */ +#define HAL_DMA_ERROR_REQGEN 0x00000400U /*!< DMAMUX request generator overrun error */ + +/** + * @} + */ + +/** @defgroup DMA_request DMA request + * @{ + */ +#define DMA_REQUEST_MEM2MEM LL_DMAMUX_REQ_MEM2MEM /*!< memory to memory transfer */ +#define DMA_REQUEST_GENERATOR0 LL_DMAMUX_REQ_GENERATOR0 /*!< DMAMUX request generator 0 */ +#define DMA_REQUEST_GENERATOR1 LL_DMAMUX_REQ_GENERATOR1 /*!< DMAMUX request generator 1 */ +#define DMA_REQUEST_GENERATOR2 LL_DMAMUX_REQ_GENERATOR2 /*!< DMAMUX request generator 2 */ +#define DMA_REQUEST_GENERATOR3 LL_DMAMUX_REQ_GENERATOR3 /*!< DMAMUX request generator 3 */ +#define DMA_REQUEST_ADC1 LL_DMAMUX_REQ_ADC1 /*!< DMAMUX ADC1 request */ +#if defined(AES) +#define DMA_REQUEST_AES_IN LL_DMAMUX_REQ_AES_IN /*!< DMAMUX AES_IN request */ +#define DMA_REQUEST_AES_OUT LL_DMAMUX_REQ_AES_OUT /*!< DMAMUX AES_OUT request */ +#endif /* AES */ +#if defined(DAC1) +#define DMA_REQUEST_DAC1_CH1 LL_DMAMUX_REQ_DAC1_CH1 /*!< DMAMUX DAC_CH1 request */ +#define DMA_REQUEST_DAC1_CH2 LL_DMAMUX_REQ_DAC1_CH2 /*!< DMAMUX DAC_CH2 request */ +#endif /* DAC1 */ +#define DMA_REQUEST_I2C1_RX LL_DMAMUX_REQ_I2C1_RX /*!< DMAMUX I2C1 RX request */ +#define DMA_REQUEST_I2C1_TX LL_DMAMUX_REQ_I2C1_TX /*!< DMAMUX I2C1 TX request */ +#define DMA_REQUEST_I2C2_RX LL_DMAMUX_REQ_I2C2_RX /*!< DMAMUX I2C2 RX request */ +#define DMA_REQUEST_I2C2_TX LL_DMAMUX_REQ_I2C2_TX /*!< DMAMUX I2C2 TX request */ +#if defined(LPUART1) +#define DMA_REQUEST_LPUART1_RX LL_DMAMUX_REQ_LPUART1_RX /*!< DMAMUX LPUART1 RX request */ +#define DMA_REQUEST_LPUART1_TX LL_DMAMUX_REQ_LPUART1_TX /*!< DMAMUX LPUART1 TX request */ +#endif /* LPUART1 */ +#define DMA_REQUEST_SPI1_RX LL_DMAMUX_REQ_SPI1_RX /*!< DMAMUX SPI1 RX request */ +#define DMA_REQUEST_SPI1_TX LL_DMAMUX_REQ_SPI1_TX /*!< DMAMUX SPI1 TX request */ +#define DMA_REQUEST_SPI2_RX LL_DMAMUX_REQ_SPI2_RX /*!< DMAMUX SPI2 RX request */ +#define DMA_REQUEST_SPI2_TX LL_DMAMUX_REQ_SPI2_TX /*!< DMAMUX SPI2 TX request */ +#define DMA_REQUEST_TIM1_CH1 LL_DMAMUX_REQ_TIM1_CH1 /*!< DMAMUX TIM1 CH1 request */ +#define DMA_REQUEST_TIM1_CH2 LL_DMAMUX_REQ_TIM1_CH2 /*!< DMAMUX TIM1 CH2 request */ +#define DMA_REQUEST_TIM1_CH3 LL_DMAMUX_REQ_TIM1_CH3 /*!< DMAMUX TIM1 CH3 request */ +#define DMA_REQUEST_TIM1_CH4 LL_DMAMUX_REQ_TIM1_CH4 /*!< DMAMUX TIM1 CH4 request */ +#define DMA_REQUEST_TIM1_TRIG_COM LL_DMAMUX_REQ_TIM1_TRIG_COM /*!< DMAMUX TIM1 TRIG COM request */ +#define DMA_REQUEST_TIM1_UP LL_DMAMUX_REQ_TIM1_UP /*!< DMAMUX TIM1 UP request */ +#if defined(TIM2) +#define DMA_REQUEST_TIM2_CH1 LL_DMAMUX_REQ_TIM2_CH1 /*!< DMAMUX TIM2 CH1 request */ +#define DMA_REQUEST_TIM2_CH2 LL_DMAMUX_REQ_TIM2_CH2 /*!< DMAMUX TIM2 CH2 request */ +#define DMA_REQUEST_TIM2_CH3 LL_DMAMUX_REQ_TIM2_CH3 /*!< DMAMUX TIM2 CH3 request */ +#define DMA_REQUEST_TIM2_CH4 LL_DMAMUX_REQ_TIM2_CH4 /*!< DMAMUX TIM2 CH4 request */ +#define DMA_REQUEST_TIM2_TRIG LL_DMAMUX_REQ_TIM2_TRIG /*!< DMAMUX TIM2 TRIG request */ +#define DMA_REQUEST_TIM2_UP LL_DMAMUX_REQ_TIM2_UP /*!< DMAMUX TIM2 UP request */ +#endif /* TIM2 */ +#define DMA_REQUEST_TIM3_CH1 LL_DMAMUX_REQ_TIM3_CH1 /*!< DMAMUX TIM3 CH1 request */ +#define DMA_REQUEST_TIM3_CH2 LL_DMAMUX_REQ_TIM3_CH2 /*!< DMAMUX TIM3 CH2 request */ +#define DMA_REQUEST_TIM3_CH3 LL_DMAMUX_REQ_TIM3_CH3 /*!< DMAMUX TIM3 CH3 request */ +#define DMA_REQUEST_TIM3_CH4 LL_DMAMUX_REQ_TIM3_CH4 /*!< DMAMUX TIM3 CH4 request */ +#define DMA_REQUEST_TIM3_TRIG LL_DMAMUX_REQ_TIM3_TRIG /*!< DMAMUX TIM3 TRIG request */ +#define DMA_REQUEST_TIM3_UP LL_DMAMUX_REQ_TIM3_UP /*!< DMAMUX TIM3 UP request */ +#if defined(TIM6) +#define DMA_REQUEST_TIM6_UP LL_DMAMUX_REQ_TIM6_UP /*!< DMAMUX TIM6 UP request */ +#endif /* TIM6 */ +#if defined(TIM7) +#define DMA_REQUEST_TIM7_UP LL_DMAMUX_REQ_TIM7_UP /*!< DMAMUX TIM7 UP request */ +#endif /* TIM7 */ +#if defined(TIM15) +#define DMA_REQUEST_TIM15_CH1 LL_DMAMUX_REQ_TIM15_CH1 /*!< DMAMUX TIM15 CH1 request */ +#define DMA_REQUEST_TIM15_CH2 LL_DMAMUX_REQ_TIM15_CH2 /*!< DMAMUX TIM15 CH2 request */ +#define DMA_REQUEST_TIM15_TRIG_COM LL_DMAMUX_REQ_TIM15_TRIG_COM /*!< DMAMUX TIM15 TRIG COM request */ +#define DMA_REQUEST_TIM15_UP LL_DMAMUX_REQ_TIM15_UP /*!< DMAMUX TIM15 UP request */ +#endif /* TIM15 */ +#define DMA_REQUEST_TIM16_CH1 LL_DMAMUX_REQ_TIM16_CH1 /*!< DMAMUX TIM16 CH1 request */ +#define DMA_REQUEST_TIM16_COM LL_DMAMUX_REQ_TIM16_COM /*!< DMAMUX TIM16 COM request */ +#define DMA_REQUEST_TIM16_UP LL_DMAMUX_REQ_TIM16_UP /*!< DMAMUX TIM16 UP request */ +#define DMA_REQUEST_TIM17_CH1 LL_DMAMUX_REQ_TIM17_CH1 /*!< DMAMUX TIM17 CH1 request */ +#define DMA_REQUEST_TIM17_COM LL_DMAMUX_REQ_TIM17_COM /*!< DMAMUX TIM17 COM request */ +#define DMA_REQUEST_TIM17_UP LL_DMAMUX_REQ_TIM17_UP /*!< DMAMUX TIM17 UP request */ +#define DMA_REQUEST_USART1_RX LL_DMAMUX_REQ_USART1_RX /*!< DMAMUX USART1 RX request */ +#define DMA_REQUEST_USART1_TX LL_DMAMUX_REQ_USART1_TX /*!< DMAMUX USART1 TX request */ +#define DMA_REQUEST_USART2_RX LL_DMAMUX_REQ_USART2_RX /*!< DMAMUX USART2 RX request */ +#define DMA_REQUEST_USART2_TX LL_DMAMUX_REQ_USART2_TX /*!< DMAMUX USART2 TX request */ +#if defined(USART3) +#define DMA_REQUEST_USART3_RX LL_DMAMUX_REQ_USART3_RX /*!< DMAMUX USART3 RX request */ +#define DMA_REQUEST_USART3_TX LL_DMAMUX_REQ_USART3_TX /*!< DMAMUX USART3 TX request */ +#endif /* USART3 */ +#if defined(USART4) +#define DMA_REQUEST_USART4_RX LL_DMAMUX_REQ_USART4_RX /*!< DMAMUX USART4 RX request */ +#define DMA_REQUEST_USART4_TX LL_DMAMUX_REQ_USART4_TX /*!< DMAMUX USART4 TX request */ +#endif /* USART4 */ +#if defined(UCPD1) +#define DMA_REQUEST_UCPD1_RX LL_DMAMUX_REQ_UCPD1_RX /*!< DMAMUX UCPD1 RX request */ +#define DMA_REQUEST_UCPD1_TX LL_DMAMUX_REQ_UCPD1_TX /*!< DMAMUX UCPD1 TX request */ +#endif/* UCPD1 */ +#if defined(UCPD2) +#define DMA_REQUEST_UCPD2_RX LL_DMAMUX_REQ_UCPD2_RX /*!< DMAMUX UCPD2 RX request */ +#define DMA_REQUEST_UCPD2_TX LL_DMAMUX_REQ_UCPD2_TX /*!< DMAMUX UCPD2 TX request */ +#endif /* UCPD2 */ + +#if defined(I2C3) +#define DMA_REQUEST_I2C3_RX LL_DMAMUX_REQ_I2C3_RX /*!< DMAMUX I2C3 RX request */ +#define DMA_REQUEST_I2C3_TX LL_DMAMUX_REQ_I2C3_TX /*!< DMAMUX I2C3 TX request */ +#endif /* I2C3 */ + +#if defined(LPUART2) +#define DMA_REQUEST_LPUART2_RX LL_DMAMUX_REQ_LPUART2_RX /*!< DMAMUX LPUART2 RX request */ +#define DMA_REQUEST_LPUART2_TX LL_DMAMUX_REQ_LPUART2_TX /*!< DMAMUX LPUART2 TX request */ +#endif /* LPUART2 */ + +#if defined(SPI3) +#define DMA_REQUEST_SPI3_RX LL_DMAMUX_REQ_SPI3_RX /*!< DMAMUX SPI3 RX request */ +#define DMA_REQUEST_SPI3_TX LL_DMAMUX_REQ_SPI3_TX /*!< DMAMUX SPI3 TX request */ +#endif /* SPI3 */ + +#if defined(TIM4) +#define DMA_REQUEST_TIM4_CH1 LL_DMAMUX_REQ_TIM4_CH1 /*!< DMAMUX TIM4 CH1 request */ +#define DMA_REQUEST_TIM4_CH2 LL_DMAMUX_REQ_TIM4_CH2 /*!< DMAMUX TIM4 CH2 request */ +#define DMA_REQUEST_TIM4_CH3 LL_DMAMUX_REQ_TIM4_CH3 /*!< DMAMUX TIM4 CH3 request */ +#define DMA_REQUEST_TIM4_CH4 LL_DMAMUX_REQ_TIM4_CH4 /*!< DMAMUX TIM4 CH4 request */ +#define DMA_REQUEST_TIM4_TRIG LL_DMAMUX_REQ_TIM4_TRIG /*!< DMAMUX TIM4 TRIG request */ +#define DMA_REQUEST_TIM4_UP LL_DMAMUX_REQ_TIM4_UP /*!< DMAMUX TIM4 UP request */ +#endif /* TIM4 */ + +#if defined(USART5) +#define DMA_REQUEST_USART5_RX LL_DMAMUX_REQ_USART5_RX /*!< DMAMUX USART5 RX request */ +#define DMA_REQUEST_USART5_TX LL_DMAMUX_REQ_USART5_TX /*!< DMAMUX USART5 TX request */ +#endif /* USART5 */ + +#if defined(USART6) +#define DMA_REQUEST_USART6_RX LL_DMAMUX_REQ_USART6_RX /*!< DMAMUX USART6 RX request */ +#define DMA_REQUEST_USART6_TX LL_DMAMUX_REQ_USART6_TX /*!< DMAMUX USART6 TX request */ +#endif /* USART6 */ + + +#define DMA_MAX_REQUEST LL_DMAMUX_MAX_REQ +/** + * @} + */ + +/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction + * @{ + */ +#define DMA_PERIPH_TO_MEMORY LL_DMA_DIRECTION_PERIPH_TO_MEMORY /*!< Peripheral to memory direction */ +#define DMA_MEMORY_TO_PERIPH LL_DMA_DIRECTION_MEMORY_TO_PERIPH /*!< Memory to peripheral direction */ +#define DMA_MEMORY_TO_MEMORY LL_DMA_DIRECTION_MEMORY_TO_MEMORY /*!< Memory to memory direction */ + +/** + * @} + */ + +/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode + * @{ + */ +#define DMA_PINC_ENABLE LL_DMA_PERIPH_INCREMENT /*!< Peripheral increment mode Enable */ +#define DMA_PINC_DISABLE LL_DMA_PERIPH_NOINCREMENT /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode + * @{ + */ +#define DMA_MINC_ENABLE LL_DMA_MEMORY_INCREMENT /*!< Memory increment mode Enable */ +#define DMA_MINC_DISABLE LL_DMA_MEMORY_NOINCREMENT /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size + * @{ + */ +#define DMA_PDATAALIGN_BYTE LL_DMA_PDATAALIGN_BYTE /*!< Peripheral data alignment : Byte */ +#define DMA_PDATAALIGN_HALFWORD LL_DMA_PDATAALIGN_HALFWORD /*!< Peripheral data alignment : HalfWord */ +#define DMA_PDATAALIGN_WORD LL_DMA_PDATAALIGN_WORD /*!< Peripheral data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_Memory_data_size DMA Memory data size + * @{ + */ +#define DMA_MDATAALIGN_BYTE LL_DMA_MDATAALIGN_BYTE /*!< Memory data alignment : Byte */ +#define DMA_MDATAALIGN_HALFWORD LL_DMA_MDATAALIGN_HALFWORD /*!< Memory data alignment : HalfWord */ +#define DMA_MDATAALIGN_WORD LL_DMA_MDATAALIGN_WORD /*!< Memory data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_mode DMA mode + * @{ + */ +#define DMA_NORMAL LL_DMA_MODE_NORMAL /*!< Normal mode */ +#define DMA_CIRCULAR LL_DMA_MODE_CIRCULAR /*!< Circular mode */ +/** + * @} + */ + +/** @defgroup DMA_Priority_level DMA Priority level + * @{ + */ +#define DMA_PRIORITY_LOW LL_DMA_PRIORITY_LOW /*!< Priority level : Low */ +#define DMA_PRIORITY_MEDIUM LL_DMA_PRIORITY_MEDIUM /*!< Priority level : Medium */ +#define DMA_PRIORITY_HIGH LL_DMA_PRIORITY_HIGH /*!< Priority level : High */ +#define DMA_PRIORITY_VERY_HIGH LL_DMA_PRIORITY_VERYHIGH /*!< Priority level : Very_High */ +/** + * @} + */ + +/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions + * @{ + */ +#define DMA_IT_TC DMA_CCR_TCIE /*!< Transfer Complete interrupt */ +#define DMA_IT_HT DMA_CCR_HTIE /*!< Half Transfer Complete interrupt */ +#define DMA_IT_TE DMA_CCR_TEIE /*!< Transfer Error interrupt */ +/** + * @} + */ + +/** @defgroup DMA_flag_definitions DMA flag definitions + * @{ + */ + +#define DMA_FLAG_GI1 DMA_ISR_GIF1 /*!< Global Interrupt flag for Channel 1 */ +#define DMA_FLAG_TC1 DMA_ISR_TCIF1 /*!< Transfer Complete flag for Channel 1 */ +#define DMA_FLAG_HT1 DMA_ISR_HTIF1 /*!< Half Transfer flag for Channel 1 */ +#define DMA_FLAG_TE1 DMA_ISR_TEIF1 /*!< Transfer Error flag for Channel 1 */ +#define DMA_FLAG_GI2 DMA_ISR_GIF2 /*!< Global Interrupt flag for Channel 2 */ +#define DMA_FLAG_TC2 DMA_ISR_TCIF2 /*!< Transfer Complete flag for Channel 2 */ +#define DMA_FLAG_HT2 DMA_ISR_HTIF2 /*!< Half Transfer flag for Channel 2 */ +#define DMA_FLAG_TE2 DMA_ISR_TEIF2 /*!< Transfer Error flag for Channel 2 */ +#define DMA_FLAG_GI3 DMA_ISR_GIF3 /*!< Global Interrupt flag for Channel 3 */ +#define DMA_FLAG_TC3 DMA_ISR_TCIF3 /*!< Transfer Complete flag for Channel 3 */ +#define DMA_FLAG_HT3 DMA_ISR_HTIF3 /*!< Half Transfer flag for Channel 3 */ +#define DMA_FLAG_TE3 DMA_ISR_TEIF3 /*!< Transfer Error flag for Channel 3 */ +#define DMA_FLAG_GI4 DMA_ISR_GIF4 /*!< Global Interrupt flag for Channel 4 */ +#define DMA_FLAG_TC4 DMA_ISR_TCIF4 /*!< Transfer Complete flag for Channel 4 */ +#define DMA_FLAG_HT4 DMA_ISR_HTIF4 /*!< Half Transfer flag for Channel 4 */ +#define DMA_FLAG_TE4 DMA_ISR_TEIF4 /*!< Transfer Error flag for Channel 4 */ +#define DMA_FLAG_GI5 DMA_ISR_GIF5 /*!< Global Interrupt flag for Channel 5 */ +#define DMA_FLAG_TC5 DMA_ISR_TCIF5 /*!< Transfer Complete flag for Channel 5 */ +#define DMA_FLAG_HT5 DMA_ISR_HTIF5 /*!< Half Transfer flag for Channel 5 */ +#define DMA_FLAG_TE5 DMA_ISR_TEIF5 /*!< Transfer Error for Channel 5 */ +#if defined(DMA1_Channel6) +#define DMA_FLAG_GI6 DMA_ISR_GIF6 /*!< Global Interrupt flag for Channel 6 */ +#define DMA_FLAG_TC6 DMA_ISR_TCIF6 /*!< Transfer Complete flag for Channel 6 */ +#define DMA_FLAG_HT6 DMA_ISR_HTIF6 /*!< Half Transfer flag for Channel 6 */ +#define DMA_FLAG_TE6 DMA_ISR_TEIF6 /*!< Transfer Error flag for Channel 6 */ +#endif /* DMA1_Channel6 */ +#if defined(DMA1_Channel7) +#define DMA_FLAG_GI7 DMA_ISR_GIF7 /*!< Global Interrupt flag for Channel 7 */ +#define DMA_FLAG_TC7 DMA_ISR_TCIF7 /*!< Transfer Complete flag for Channel 7 */ +#define DMA_FLAG_HT7 DMA_ISR_HTIF7 /*!< Half Transfer flag for Channel 7 */ +#define DMA_FLAG_TE7 DMA_ISR_TEIF7 /*!< Transfer Error flag for Channel 7 */ +#endif /* DMA1_Channel7 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup DMA_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @brief Reset DMA handle state + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) + +/** + * @brief Enable the specified DMA Channel. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN) + +/** + * @brief Disable the specified DMA Channel. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN) + +/** + * @brief Return the current DMA Channel transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer complete flag index. + */ +#if defined(DMA2) +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + DMA_FLAG_TC7) +#else /* DMA1 */ +#if defined(DMA1_Channel7) +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + DMA_FLAG_TC7) +#else +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + DMA_FLAG_TC5) +#endif /* DMA1_Channel8 */ +#endif /* DMA2 */ + +/** + * @brief Return the current DMA Channel half transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified half transfer complete flag index. + */ +#if defined(DMA2) +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + DMA_FLAG_HT7) +#else /* DMA1 */ +#if defined(DMA1_Channel7) +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + DMA_FLAG_HT7) +#else +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + DMA_FLAG_HT5) +#endif /* DMA1_Channel8 */ +#endif /* DMA2 */ + +/** + * @brief Return the current DMA Channel transfer error flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#if defined(DMA2) +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + DMA_FLAG_TE7) +#else /* DMA1 */ +#if defined(DMA1_Channel7) +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + DMA_FLAG_TE7) +#else +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + DMA_FLAG_TE5) +#endif /* DMA1_Channel8 */ +#endif /* DMA2 */ + +/** + * @brief Return the current DMA Channel Global interrupt flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#if defined(DMA2) +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GI1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_GI1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GI2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_GI2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GI3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_GI3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GI4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_GI4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GI5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_GI5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GI6 :\ + DMA_FLAG_GI7) +#else /* DMA1 */ +#if defined(DMA1_Channel7) +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GI1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GI2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GI3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GI4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GI5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GI6 :\ + DMA_FLAG_GI7) +#else +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GI1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GI2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GI3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GI4 :\ + DMA_FLAG_GI5) +#endif /* DMA1_Channel8 */ +#endif /* DMA2 */ + +/** + * @brief Get the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * @arg DMA_FLAG_GIx: Global interrupt flag + * Where x can be 1 to max Channel supported by the product to select the DMA Channel flag. + * @retval The state of FLAG (SET or RESET). + */ +#if defined(DMA2) +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (((uint32_t)((__HANDLE__)->Instance) > ((uint32_t)DMA1_Channel7))? \ + (DMA2->ISR & (__FLAG__)) : (DMA1->ISR & (__FLAG__))) +#else /* DMA1 */ +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__)) +#endif /* DMA2 */ + +/** + * @brief Clear the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * @arg DMA_FLAG_GIx: Global interrupt flag + * Where x can be 1 to max Channel supported by the product to select the DMA Channel flag. + * @retval None + */ +#if defined(DMA2) +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (((uint32_t)((__HANDLE__)->Instance) > ((uint32_t)DMA1_Channel7))? \ + (DMA2->IFCR = (__FLAG__)) : (DMA1->IFCR = (__FLAG__))) +#else /* DMA1 */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR |= (__FLAG__)) +#endif /* DMA2 */ + +/** + * @brief Enable the specified DMA Channel interrupts. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__)) + +/** + * @brief Disable the specified DMA Channel interrupts. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified DMA Channel interrupt is enabled or disabled. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval The state of DMA_IT (SET or RESET). + */ +#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CCR & (__INTERRUPT__))) + +/** + * @brief Returns the number of remaining data units in the current DMA Channel transfer. + * @param __HANDLE__ DMA handle + * @retval The number of remaining data units in the current DMA Channel transfer. + */ +#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR) + +/** + * @} + */ + +/* Include DMA HAL Extension module */ +#include "stm32g0xx_hal_dma_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup DMA_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, + uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, + uint32_t Timeout); +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)); +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); + +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMA_Private_Macros DMA Private Macros + * @{ + */ + +#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ + ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ + ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) + +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < DMA_CNDTR_NDT)) + +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ + ((STATE) == DMA_PINC_DISABLE)) + +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ + ((STATE) == DMA_MINC_DISABLE)) + +#define IS_DMA_ALL_REQUEST(REQUEST) ((REQUEST) <= DMA_MAX_REQUEST) + +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ + ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_PDATAALIGN_WORD)) + +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ + ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_MDATAALIGN_WORD )) + +#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ + ((MODE) == DMA_CIRCULAR)) + +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ + ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ + ((PRIORITY) == DMA_PRIORITY_HIGH) || \ + ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_DMA_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma_ex.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma_ex.h new file mode 100644 index 0000000..b48dec7 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma_ex.h @@ -0,0 +1,278 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_dma_ex.h + * @author MCD Application Team + * @brief Header file of DMA HAL extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_DMA_EX_H +#define STM32G0xx_HAL_DMA_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" +#include "stm32g0xx_ll_dmamux.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMAEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Types DMAEx Exported Types + * @{ + */ + +/** + * @brief HAL DMAMUX Synchronization configuration structure definition + */ +typedef struct +{ + uint32_t SyncSignalID; /*!< Specifies the synchronization signal gating the DMA request in periodic mode. + This parameter can be a value of @ref DMAEx_DMAMUX_SyncSignalID_selection */ + + uint32_t SyncPolarity; /*!< Specifies the polarity of the signal on which the DMA request is synchronized. + This parameter can be a value of @ref DMAEx_DMAMUX_SyncPolarity_selection */ + + FunctionalState SyncEnable; /*!< Specifies if the synchronization shall be enabled or disabled + This parameter can take the value ENABLE or DISABLE */ + + FunctionalState EventEnable; /*!< Specifies if an event shall be generated once the RequestNumber is reached. + This parameter can take the value ENABLE or DISABLE */ + + uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be authorized after a sync event + This parameter must be a number between Min_Data = 1 and Max_Data = 32 */ + + +} HAL_DMA_MuxSyncConfigTypeDef; + + +/** + * @brief HAL DMAMUX request generator parameters structure definition + */ +typedef struct +{ + uint32_t SignalID; /*!< Specifies the ID of the signal used for DMAMUX request generator + This parameter can be a value of @ref DMAEx_DMAMUX_SignalGeneratorID_selection */ + + uint32_t Polarity; /*!< Specifies the polarity of the signal on which the request is generated. + This parameter can be a value of @ref DMAEx_DMAMUX_RequestGeneneratorPolarity_selection */ + + uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be generated after a signal event + This parameter must be a number between Min_Data = 1 and Max_Data = 32 */ + +} HAL_DMA_MuxRequestGeneratorConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Constants DMAEx Exported Constants + * @{ + */ + +/** @defgroup DMAEx_DMAMUX_SyncSignalID_selection DMAMUX SyncSignalID selection + * @{ + */ +#define HAL_DMAMUX1_SYNC_EXTI0 LL_DMAMUX_SYNC_EXTI_LINE0 /*!< Synchronization signal from EXTI Line0 */ +#define HAL_DMAMUX1_SYNC_EXTI1 LL_DMAMUX_SYNC_EXTI_LINE1 /*!< Synchronization signal from EXTI Line1 */ +#define HAL_DMAMUX1_SYNC_EXTI2 LL_DMAMUX_SYNC_EXTI_LINE2 /*!< Synchronization signal from EXTI Line2 */ +#define HAL_DMAMUX1_SYNC_EXTI3 LL_DMAMUX_SYNC_EXTI_LINE3 /*!< Synchronization signal from EXTI Line3 */ +#define HAL_DMAMUX1_SYNC_EXTI4 LL_DMAMUX_SYNC_EXTI_LINE4 /*!< Synchronization signal from EXTI Line4 */ +#define HAL_DMAMUX1_SYNC_EXTI5 LL_DMAMUX_SYNC_EXTI_LINE5 /*!< Synchronization signal from EXTI Line5 */ +#define HAL_DMAMUX1_SYNC_EXTI6 LL_DMAMUX_SYNC_EXTI_LINE6 /*!< Synchronization signal from EXTI Line6 */ +#define HAL_DMAMUX1_SYNC_EXTI7 LL_DMAMUX_SYNC_EXTI_LINE7 /*!< Synchronization signal from EXTI Line7 */ +#define HAL_DMAMUX1_SYNC_EXTI8 LL_DMAMUX_SYNC_EXTI_LINE8 /*!< Synchronization signal from EXTI Line8 */ +#define HAL_DMAMUX1_SYNC_EXTI9 LL_DMAMUX_SYNC_EXTI_LINE9 /*!< Synchronization signal from EXTI Line9 */ +#define HAL_DMAMUX1_SYNC_EXTI10 LL_DMAMUX_SYNC_EXTI_LINE10 /*!< Synchronization signal from EXTI Line10 */ +#define HAL_DMAMUX1_SYNC_EXTI11 LL_DMAMUX_SYNC_EXTI_LINE11 /*!< Synchronization signal from EXTI Line11 */ +#define HAL_DMAMUX1_SYNC_EXTI12 LL_DMAMUX_SYNC_EXTI_LINE12 /*!< Synchronization signal from EXTI Line12 */ +#define HAL_DMAMUX1_SYNC_EXTI13 LL_DMAMUX_SYNC_EXTI_LINE13 /*!< Synchronization signal from EXTI Line1 3 */ +#define HAL_DMAMUX1_SYNC_EXTI14 LL_DMAMUX_SYNC_EXTI_LINE14 /*!< Synchronization signal from EXTI Line1 4 */ +#define HAL_DMAMUX1_SYNC_EXTI15 LL_DMAMUX_SYNC_EXTI_LINE15 /*!< Synchronization signal from EXTI Line1 5 */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH0_EVT LL_DMAMUX_SYNC_DMAMUX_CH0 /*!< Synchronization signal from DMAMUX channel0 Event */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH1_EVT LL_DMAMUX_SYNC_DMAMUX_CH1 /*!< Synchronization signal from DMAMUX channel1 Event */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH2_EVT LL_DMAMUX_SYNC_DMAMUX_CH2 /*!< Synchronization signal from DMAMUX channel2 Event */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH3_EVT LL_DMAMUX_SYNC_DMAMUX_CH3 /*!< Synchronization signal from DMAMUX channel3 Event */ +#if defined(LPTIM1) +#define HAL_DMAMUX1_SYNC_LPTIM1_OUT LL_DMAMUX_SYNC_LPTIM1_OUT /*!< Synchronization signal from LPTIM1 Output */ +#endif /* LPTIM1 */ +#if defined(LPTIM2) +#define HAL_DMAMUX1_SYNC_LPTIM2_OUT LL_DMAMUX_SYNC_LPTIM2_OUT /*!< Synchronization signal from LPTIM2 Output */ +#endif /* LPTIM2 */ +#define HAL_DMAMUX1_SYNC_TIM14_OC LL_DMAMUX_SYNC_TIM14_OC /*!< Synchronization signal from TIM14 OC */ + +#define HAL_DMAMUX1_MAX_SYNC HAL_DMAMUX1_SYNC_TIM14_OC +/** + * @} + */ + +/** @defgroup DMAEx_DMAMUX_SyncPolarity_selection DMAMUX SyncPolarity selection + * @{ + */ +#define HAL_DMAMUX_SYNC_NO_EVENT LL_DMAMUX_SYNC_NO_EVENT /*!< block synchronization events */ +#define HAL_DMAMUX_SYNC_RISING LL_DMAMUX_SYNC_POL_RISING /*!< synchronize with rising edge events */ +#define HAL_DMAMUX_SYNC_FALLING LL_DMAMUX_SYNC_POL_FALLING /*!< synchronize with falling edge events */ +#define HAL_DMAMUX_SYNC_RISING_FALLING LL_DMAMUX_SYNC_POL_RISING_FALLING /*!< synchronize with rising and falling edge events */ + +/** + * @} + */ + +/** @defgroup DMAEx_DMAMUX_SignalGeneratorID_selection DMAMUX SignalGeneratorID selection + * @{ + */ +#define HAL_DMAMUX1_REQ_GEN_EXTI0 LL_DMAMUX_REQ_GEN_EXTI_LINE0 /*!< Request signal generation from EXTI Line0 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI1 LL_DMAMUX_REQ_GEN_EXTI_LINE1 /*!< Request signal generation from EXTI Line1 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI2 LL_DMAMUX_REQ_GEN_EXTI_LINE2 /*!< Request signal generation from EXTI Line2 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI3 LL_DMAMUX_REQ_GEN_EXTI_LINE3 /*!< Request signal generation from EXTI Line3 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI4 LL_DMAMUX_REQ_GEN_EXTI_LINE4 /*!< Request signal generation from EXTI Line4 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI5 LL_DMAMUX_REQ_GEN_EXTI_LINE5 /*!< Request signal generation from EXTI Line5 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI6 LL_DMAMUX_REQ_GEN_EXTI_LINE6 /*!< Request signal generation from EXTI Line6 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI7 LL_DMAMUX_REQ_GEN_EXTI_LINE7 /*!< Request signal generation from EXTI Line7 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI8 LL_DMAMUX_REQ_GEN_EXTI_LINE8 /*!< Request signal generation from EXTI Line8 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI9 LL_DMAMUX_REQ_GEN_EXTI_LINE9 /*!< Request signal generation from EXTI Line9 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI10 LL_DMAMUX_REQ_GEN_EXTI_LINE10 /*!< Request signal generation from EXTI Line10 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI11 LL_DMAMUX_REQ_GEN_EXTI_LINE11 /*!< Request signal generation from EXTI Line11 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI12 LL_DMAMUX_REQ_GEN_EXTI_LINE12 /*!< Request signal generation from EXTI Line12 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI13 LL_DMAMUX_REQ_GEN_EXTI_LINE13 /*!< Request signal generation from EXTI Line13 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI14 LL_DMAMUX_REQ_GEN_EXTI_LINE14 /*!< Request signal generation from EXTI Line14 */ +#define HAL_DMAMUX1_REQ_GEN_EXTI15 LL_DMAMUX_REQ_GEN_EXTI_LINE15 /*!< Request signal generation from EXTI Line15 */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT LL_DMAMUX_REQ_GEN_DMAMUX_CH0 /*!< Request signal generation from DMAMUX channel0 Event */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT LL_DMAMUX_REQ_GEN_DMAMUX_CH1 /*!< Request signal generation from DMAMUX channel1 Event */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT LL_DMAMUX_REQ_GEN_DMAMUX_CH2 /*!< Request signal generation from DMAMUX channel2 Event */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT LL_DMAMUX_REQ_GEN_DMAMUX_CH3 /*!< Request signal generation from DMAMUX channel3 Event */ +#if defined(LPTIM1) +#define HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT LL_DMAMUX_REQ_GEN_LPTIM1_OUT /*!< Request signal generation from LPTIM1 Output */ +#endif /* LPTIM1 */ +#if defined(LPTIM2) +#define HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT LL_DMAMUX_REQ_GEN_LPTIM2_OUT /*!< Request signal generation from LPTIM2 Output */ +#endif /* LPTIM2 */ +#define HAL_DMAMUX1_REQ_GEN_TIM14_OC LL_DMAMUX_REQ_GEN_TIM14_OC /*!< Request signal generation from TIM14 OC */ + +#define HAL_DMAMUX1_MAX_REQ_GEN HAL_DMAMUX1_REQ_GEN_TIM14_OC +/** + * @} + */ + +/** @defgroup DMAEx_DMAMUX_RequestGeneneratorPolarity_selection DMAMUX RequestGeneneratorPolarity selection + * @{ + */ +#define HAL_DMAMUX_REQ_GEN_NO_EVENT LL_DMAMUX_REQ_GEN_NO_EVENT /*!< block request generator events */ +#define HAL_DMAMUX_REQ_GEN_RISING LL_DMAMUX_REQ_GEN_POL_RISING /*!< generate request on rising edge events */ +#define HAL_DMAMUX_REQ_GEN_FALLING LL_DMAMUX_REQ_GEN_POL_FALLING /*!< generate request on falling edge events */ +#define HAL_DMAMUX_REQ_GEN_RISING_FALLING LL_DMAMUX_REQ_GEN_POL_RISING_FALLING /*!< generate request on rising and falling edge events */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DMAEx_Exported_Functions + * @{ + */ + +/* IO operation functions *****************************************************/ +/** @addtogroup DMAEx_Exported_Functions_Group1 + * @{ + */ + +/* ------------------------- REQUEST -----------------------------------------*/ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator(DMA_HandleTypeDef *hdma, + HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig); +HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator(DMA_HandleTypeDef *hdma); +/* -------------------------------------------------------------------------- */ + +/* ------------------------- SYNCHRO -----------------------------------------*/ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig); +/* -------------------------------------------------------------------------- */ + +void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma); + +/** + * @} + */ + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMAEx_Private_Macros DMAEx Private Macros + * @brief DMAEx private macros + * @{ + */ + +#define IS_DMAMUX_SYNC_SIGNAL_ID(SIGNAL_ID) (((SIGNAL_ID) == HAL_DMAMUX1_SYNC_EXTI0) || \ + (((SIGNAL_ID) >= HAL_DMAMUX1_SYNC_EXTI1) && \ + ((SIGNAL_ID) <= HAL_DMAMUX1_MAX_SYNC))) + +#define IS_DMAMUX_SYNC_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U)) + +#define IS_DMAMUX_SYNC_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_SYNC_NO_EVENT) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_RISING) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_FALLING) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_RISING_FALLING)) + +#define IS_DMAMUX_SYNC_STATE(SYNC) (((SYNC) == DISABLE) || ((SYNC) == ENABLE)) + +#define IS_DMAMUX_SYNC_EVENT(EVENT) (((EVENT) == DISABLE) || \ + ((EVENT) == ENABLE)) + +#define IS_DMAMUX_REQUEST_GEN_SIGNAL_ID(SIGNAL_ID) (((SIGNAL_ID) == HAL_DMAMUX1_REQ_GEN_EXTI0) || \ + (((SIGNAL_ID) >= HAL_DMAMUX1_REQ_GEN_EXTI1) && \ + ((SIGNAL_ID) <= HAL_DMAMUX1_MAX_REQ_GEN))) + +#define IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U)) + +#define IS_DMAMUX_REQUEST_GEN_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_REQ_GEN_NO_EVENT)|| \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING) || \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_FALLING) || \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING_FALLING)) + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_DMA_EX_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_exti.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_exti.h new file mode 100644 index 0000000..8a20c24 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_exti.h @@ -0,0 +1,387 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_exti.h + * @author MCD Application Team + * @brief Header file of EXTI HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_EXTI_H +#define STM32G0xx_HAL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup EXTI EXTI + * @brief EXTI HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup EXTI_Exported_Types EXTI Exported Types + * @{ + */ +typedef enum +{ + HAL_EXTI_COMMON_CB_ID = 0x00U, + HAL_EXTI_RISING_CB_ID = 0x01U, + HAL_EXTI_FALLING_CB_ID = 0x02U, +} EXTI_CallbackIDTypeDef; + + +/** + * @brief EXTI Handle structure definition + */ +typedef struct +{ + uint32_t Line; /*!< Exti line number */ + void (* RisingCallback)(void); /*!< Exti rising callback */ + void (* FallingCallback)(void); /*!< Exti falling callback */ +} EXTI_HandleTypeDef; + +/** + * @brief EXTI Configuration structure definition + */ +typedef struct +{ + uint32_t Line; /*!< The Exti line to be configured. This parameter + can be a value of @ref EXTI_Line */ + uint32_t Mode; /*!< The Exit Mode to be configured for a core. + This parameter can be a combination of @ref EXTI_Mode */ + uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter + can be a value of @ref EXTI_Trigger */ + uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured. + This parameter is only possible for line 0 to 15. It + can be a value of @ref EXTI_GPIOSel */ +} EXTI_ConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_Line EXTI Line + * @{ + */ +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | 0x10u) +#if defined(COMP1) +#define EXTI_LINE_17 (EXTI_CONFIG | EXTI_REG1 | 0x11u) +#else +#define EXTI_LINE_17 (EXTI_RESERVED | EXTI_REG1 | 0x11u) +#endif /* COMP1 */ +#if defined(COMP2) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | 0x12u) +#else +#define EXTI_LINE_18 (EXTI_RESERVED | EXTI_REG1 | 0x12u) +#endif /* COMP2 */ +#define EXTI_LINE_19 (EXTI_DIRECT | EXTI_REG1 | 0x13u) +#if defined(COMP3) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | 0x14u) +#else +#define EXTI_LINE_20 (EXTI_RESERVED | EXTI_REG1 | 0x14u) +#endif /* COMP3 */ +#define EXTI_LINE_21 (EXTI_DIRECT | EXTI_REG1 | 0x15u) +#if defined(RCC_CCIPR_I2C2SEL) +#define EXTI_LINE_22 (EXTI_DIRECT | EXTI_REG1 | 0x16u) +#else +#define EXTI_LINE_22 (EXTI_RESERVED | EXTI_REG1 | 0x16u) +#endif /* RCC_CCIPR_I2C2SEL */ +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | 0x17u) +#if defined(RCC_CCIPR_USART3SEL) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | 0x18u) +#else +#define EXTI_LINE_24 (EXTI_RESERVED | EXTI_REG1 | 0x18u) +#endif /* RCC_CCIPR_USART3SEL */ +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | 0x19u) +#if defined(RCC_CCIPR_USART2SEL) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | 0x1Au) +#else +#define EXTI_LINE_26 (EXTI_RESERVED | EXTI_REG1 | 0x1Au) +#endif /* RCC_CCIPR_USART2SEL */ +#if defined(CEC) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | 0x1Bu) +#else +#define EXTI_LINE_27 (EXTI_RESERVED | EXTI_REG1 | 0x1Bu) +#endif /* CEC */ +#if defined(LPUART1) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | 0x1Cu) +#else +#define EXTI_LINE_28 (EXTI_RESERVED | EXTI_REG1 | 0x1Cu) +#endif /* LPUART1 */ +#if defined(LPTIM1) +#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | 0x1Du) +#else +#define EXTI_LINE_29 (EXTI_RESERVED | EXTI_REG1 | 0x1Du) +#endif /* LPTIM1 */ +#if defined(LPTIM2) +#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | 0x1Eu) +#else +#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu) +#endif /* LPTIM2 */ +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | 0x1Fu) +#if defined(UCPD1) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | 0x00u) +#else +#define EXTI_LINE_32 (EXTI_RESERVED | EXTI_REG2 | 0x00u) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | 0x01u) +#else +#define EXTI_LINE_33 (EXTI_RESERVED | EXTI_REG2 | 0x01u) +#endif /* UCPD2 */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +#define EXTI_LINE_34 (EXTI_CONFIG | EXTI_REG2 | 0x02u) +#else +#define EXTI_LINE_34 (EXTI_RESERVED | EXTI_REG2 | 0x02u) +#endif /* STM32G0C1xx || STM32G0B1xx */ +#if defined(LPUART2) +#define EXTI_LINE_35 (EXTI_DIRECT | EXTI_REG2 | 0x03u) +#else +#define EXTI_LINE_35 (EXTI_RESERVED | EXTI_REG2 | 0x03u) +#endif /* LPUART2 */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define EXTI_LINE_36 (EXTI_DIRECT | EXTI_REG2 | 0x04u) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +/** + * @} + */ + +/** @defgroup EXTI_Mode EXTI Mode + * @{ + */ +#define EXTI_MODE_NONE 0x00000000u +#define EXTI_MODE_INTERRUPT 0x00000001u +#define EXTI_MODE_EVENT 0x00000002u +/** + * @} + */ + +/** @defgroup EXTI_Trigger EXTI Trigger + * @{ + */ +#define EXTI_TRIGGER_NONE 0x00000000u +#define EXTI_TRIGGER_RISING 0x00000001u +#define EXTI_TRIGGER_FALLING 0x00000002u +#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) +/** + * @} + */ + +/** @defgroup EXTI_GPIOSel EXTI GPIOSel + * @brief + * @{ + */ +#define EXTI_GPIOA 0x00000000u +#define EXTI_GPIOB 0x00000001u +#define EXTI_GPIOC 0x00000002u +#define EXTI_GPIOD 0x00000003u +#if defined(GPIOE) +#define EXTI_GPIOE 0x00000004u +#endif /* GPIOE */ +#define EXTI_GPIOF 0x00000005u +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Private constants --------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +/** + * @brief EXTI Line property definition + */ +#define EXTI_PROPERTY_SHIFT 24u +#define EXTI_DIRECT (0x01uL << EXTI_PROPERTY_SHIFT) +#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT) +#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG) +#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT) +#define EXTI_PROPERTY_MASK (EXTI_DIRECT | EXTI_CONFIG | EXTI_GPIO) + +/** + * @brief EXTI Register and bit usage + */ +#define EXTI_REG_SHIFT 16u +#define EXTI_REG1 (0x00uL << EXTI_REG_SHIFT) +#define EXTI_REG2 (0x01uL << EXTI_REG_SHIFT) +#define EXTI_REG_MASK (EXTI_REG1 | EXTI_REG2) +#define EXTI_PIN_MASK 0x0000001Fu + +/** + * @brief EXTI Mask for interrupt & event mode + */ +#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT) + +/** + * @brief EXTI Mask for trigger possibilities + */ +#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) + +/** + * @brief EXTI Line number + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +#define EXTI_LINE_NB 37uL +#elif defined(STM32G0B0xx) +#define EXTI_LINE_NB 37uL +#elif defined(STM32G081xx) || defined(STM32G071xx) +#define EXTI_LINE_NB 34uL +#elif defined(STM32G070xx) +#define EXTI_LINE_NB 34uL +#elif defined(STM32G041xx) || defined(STM32G031xx) +#define EXTI_LINE_NB 32uL +#else +#define EXTI_LINE_NB 32uL +#endif /* STM32G0C1xx || STM32G0B1xx */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Macros EXTI Private Macros + * @{ + */ +#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_REG_MASK | EXTI_PIN_MASK)) == 0x00u) && \ + ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \ + (((__EXTI_LINE__) & (EXTI_REG_MASK | EXTI_PIN_MASK)) < \ + (((EXTI_LINE_NB / 32u) << EXTI_REG_SHIFT) | (EXTI_LINE_NB % 32u)))) + +#define IS_EXTI_MODE(__MODE__) ((((__MODE__) & EXTI_MODE_MASK) != 0x00u) && \ + (((__MODE__) & ~EXTI_MODE_MASK) == 0x00u)) + +#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u) + +#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) (((__EXTI_LINE__) == EXTI_TRIGGER_RISING) || \ + ((__EXTI_LINE__) == EXTI_TRIGGER_FALLING)) + +#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u) + +#if defined(GPIOE) +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOF)) +#else +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOF)) +#endif /* GPIOE */ + +#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16u) + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Functions EXTI Exported Functions + * @brief EXTI Exported Functions + * @{ + */ + +/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions + * @brief Configuration functions + * @{ + */ +/* Configuration functions ****************************************************/ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti); +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)); +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine); +/** + * @} + */ + +/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * @{ + */ +/* IO operation functions *****************************************************/ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti); +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_EXTI_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash.h new file mode 100644 index 0000000..25a316a --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash.h @@ -0,0 +1,1033 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_flash.h + * @author MCD Application Team + * @brief Header file of FLASH HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_FLASH_H +#define STM32G0xx_HAL_FLASH_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Types FLASH Exported Types + * @{ + */ + +/** + * @brief FLASH Erase structure definition + */ +typedef struct +{ + uint32_t TypeErase; /*!< Mass erase or page erase. + This parameter can be a value of @ref FLASH_Type_Erase */ + uint32_t Banks; /*!< Select bank to erase. + This parameter must be a value of @ref FLASH_Banks + (FLASH_BANK_BOTH should be used only for mass erase) */ + uint32_t Page; /*!< Initial Flash page to erase when page erase is enabled + This parameter must be a value between 0 and (FLASH_PAGE_NB - 1) */ + uint32_t NbPages; /*!< Number of pages to be erased. + This parameter must be a value between 1 and (FLASH_PAGE_NB - value of initial page)*/ +} FLASH_EraseInitTypeDef; + +/** + * @brief FLASH Option Bytes Program structure definition + */ +typedef struct +{ + uint32_t OptionType; /*!< Option byte to be configured. + This parameter can be a combination of the values of @ref FLASH_OB_Type */ + uint32_t WRPArea; /*!< Write protection area to be programmed (used for OPTIONBYTE_WRP). + Only one WRP area could be programmed at the same time. + This parameter can be value of @ref FLASH_OB_WRP_Area */ + uint32_t WRPStartOffset; /*!< Write protection start offset (used for OPTIONBYTE_WRP). + This parameter must be a value between 0 and [FLASH_PAGE_NB - 1]*/ + uint32_t WRPEndOffset; /*!< Write protection end offset (used for OPTIONBYTE_WRP). + This parameter must be a value between WRPStartOffset and [FLASH_PAGE_NB - 1] */ + uint32_t RDPLevel; /*!< Set the read protection level (used for OPTIONBYTE_RDP). + This parameter can be a value of @ref FLASH_OB_Read_Protection */ + uint32_t USERType; /*!< User option byte(s) to be configured (used for OPTIONBYTE_USER). + This parameter can be a combination of @ref FLASH_OB_USER_Type */ + uint32_t USERConfig; /*!< Value of the user option byte (used for OPTIONBYTE_USER). + This parameter can be a combination of + @ref FLASH_OB_USER_BOR_ENABLE(*), + @ref FLASH_OB_USER_BOR_LEVEL(*), + @ref FLASH_OB_USER_RESET_CONFIG(*), + @ref FLASH_OB_USER_nRST_STOP, + @ref FLASH_OB_USER_nRST_STANDBY, + @ref FLASH_OB_USER_nRST_SHUTDOWN(*), + @ref FLASH_OB_USER_IWDG_SW, + @ref FLASH_OB_USER_IWDG_STOP, + @ref FLASH_OB_USER_IWDG_STANDBY, + @ref FLASH_OB_USER_WWDG_SW, + @ref FLASH_OB_USER_SRAM_PARITY, + @ref FLASH_OB_USER_BANK_SWAP(*), + @ref FLASH_OB_USER_DUAL_BANK(*), + @ref FLASH_OB_USER_nBOOT_SEL, + @ref FLASH_OB_USER_nBOOT1, + @ref FLASH_OB_USER_nBOOT0, + @ref FLASH_OB_USER_INPUT_RESET_HOLDER(*) + @note (*) availability depends on devices */ +#if defined(FLASH_PCROP_SUPPORT) + uint32_t PCROPConfig; /*!< Configuration of the PCROP (used for OPTIONBYTE_PCROP). + This parameter must be a combination of @ref FLASH_OB_PCROP_ZONE + and @ref FLASH_OB_PCROP_RDP. Note that once set, Pcrop erase on RDP level 1 regression + (PCROP_RDP bit) can not be reset. It will be reset by mass erase */ + uint32_t PCROP1AStartAddr; /*!< PCROP Start address (used for OPTIONBYTE_PCROP). It represents first address of start block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ + uint32_t PCROP1AEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP). It represents first address of end block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ + uint32_t PCROP1BStartAddr; /*!< PCROP Start address (used for OPTIONBYTE_PCROP). It represents first address of start block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ + uint32_t PCROP1BEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP). It represents first address of end block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ +#if defined(FLASH_DBANK_SUPPORT) + uint32_t PCROP2AStartAddr; /*!< PCROP Start address (used for OPTIONBYTE_PCROP). It represents first address of start block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ + uint32_t PCROP2AEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP). It represents first address of end block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ + uint32_t PCROP2BStartAddr; /*!< PCROP Start address (used for OPTIONBYTE_PCROP). It represents first address of start block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ + uint32_t PCROP2BEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP). It represents first address of end block + to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/ +#endif /* FLASH_DBANK_SUPPORT */ +#endif /* FLASH_PCROP_SUPPORT */ +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) + uint32_t BootEntryPoint; /*!< Allow to force a unique boot entry point to Flash or system Flash */ + uint32_t SecSize; /*!< This parameter defines securable memory area width in number of pages starting from Flash base address. + This parameter must be a value between [0] and [FLASH_PAGE_NB], + [0] meaning no secure area defined, [1] meaning first page only protected, etc... */ +#if defined(FLASH_DBANK_SUPPORT) + uint32_t SecSize2; /*!< This parameter defines securable memory area width in number of pages starting from 2nd Bank start address. + This parameter must be a value between [0] and [FLASH_PAGE_NB], + [0] meaning no secure area defined, [1] meaning first page only protected, etc... */ +#endif /* FLASH_SECURABLE_MEMORY_SUPPORT */ +#endif /* FLASH_DBANK_SUPPORT */ +} FLASH_OBProgramInitTypeDef; + +/** + * @brief FLASH handle Structure definition + */ +typedef struct +{ + HAL_LockTypeDef Lock; /* FLASH locking object */ + uint32_t ErrorCode; /* FLASH error code */ + uint32_t ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */ + uint32_t Address; /* Internal variable to save address selected for program in IT context */ + uint32_t Banks; /* Internal variable to save current bank selected during erase in IT context */ + uint32_t Page; /* Internal variable to define the current page which is erasing in IT context */ + uint32_t NbPagesToErase; /* Internal variable to save the remaining pages to erase in IT context */ +} FLASH_ProcessTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Constants FLASH Exported Constants + * @{ + */ +/** @defgroup FLASH_Keys FLASH Keys + * @{ + */ +#define FLASH_KEY1 0x45670123U /*!< Flash key1 */ +#define FLASH_KEY2 0xCDEF89ABU /*!< Flash key2: used with FLASH_KEY1 + to unlock the FLASH registers access */ +#define FLASH_OPTKEY1 0x08192A3BU /*!< Flash option byte key1 */ +#define FLASH_OPTKEY2 0x4C5D6E7FU /*!< Flash option byte key2: used with FLASH_OPTKEY1 + to allow option bytes operations */ +/** + * @} + */ + +/** @defgroup FLASH_Latency FLASH Latency + * @{ + */ +#define FLASH_LATENCY_0 0x00000000UL /*!< FLASH Zero wait state */ +#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_0 /*!< FLASH One wait state */ +#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_1 /*!< FLASH Two wait states */ +/** + * @} + */ + +/** @defgroup FLASH_Flags FLASH Flags Definition + * @{ + */ +#define FLASH_FLAG_EOP ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_EOP_Pos) /*!< FLASH End of operation flag */ +#define FLASH_FLAG_OPERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_OPERR_Pos) /*!< FLASH Operation error flag */ +#define FLASH_FLAG_PROGERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_PROGERR_Pos) /*!< FLASH Programming error flag */ +#define FLASH_FLAG_WRPERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_WRPERR_Pos) /*!< FLASH Write protection error flag */ +#define FLASH_FLAG_PGAERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_PGAERR_Pos) /*!< FLASH Programming alignment error flag */ +#define FLASH_FLAG_SIZERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_SIZERR_Pos) /*!< FLASH Size error flag */ +#define FLASH_FLAG_PGSERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_PGSERR_Pos) /*!< FLASH Programming sequence error flag */ +#define FLASH_FLAG_MISERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_MISERR_Pos) /*!< FLASH Fast programming data miss error flag */ +#define FLASH_FLAG_FASTERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_FASTERR_Pos) /*!< FLASH Fast programming error flag */ +#if defined(FLASH_PCROP_SUPPORT) +#define FLASH_FLAG_RDERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_RDERR_Pos) /*!< FLASH PCROP read error flag */ +#endif /* FLASH_PCROP_SUPPORT */ +#define FLASH_FLAG_OPTVERR ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_OPTVERR_Pos) /*!< FLASH Option validity error flag */ +#define FLASH_FLAG_BSY1 ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_BSY1_Pos) /*!< FLASH Operation Busy flag for Bank 1 */ +#if defined(FLASH_DBANK_SUPPORT) +#define FLASH_FLAG_BSY2 ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_BSY2_Pos) /*!< FLASH Operation Busy flag for Bank 2 */ +#endif /* FLASH_DBANK_SUPPORT */ +#define FLASH_FLAG_BSY FLASH_FLAG_BSY1 /*!< FLASH Operation Busy flag - legacy name for single bank */ +#define FLASH_FLAG_CFGBSY ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_CFGBSY_Pos) /*!< FLASH Configuration Busy flag */ +#if defined(FLASH_DBANK_SUPPORT) +#define FLASH_FLAG_PESD ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_PESD_Pos) /*!< FLASH Programming/erase operation suspended */ +#endif /* FLASH_DBANK_SUPPORT */ +#define FLASH_FLAG_ECCC1 ((FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS) | FLASH_ECCR_ECCC_Pos) /*!< FLASH ECC correction on bank 1 */ +#define FLASH_FLAG_ECCD1 ((FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS) | FLASH_ECCR_ECCD_Pos) /*!< FLASH ECC detection on bank 1 */ +#if defined(FLASH_DBANK_SUPPORT) +#define FLASH_FLAG_ECCC2 ((FLASH_FLAG_ECCR2_ID << FLASH_FLAG_REG_POS) | FLASH_ECC2R_ECCC_Pos) /*!< FLASH ECC correction on bank 2 */ +#define FLASH_FLAG_ECCD2 ((FLASH_FLAG_ECCR2_ID << FLASH_FLAG_REG_POS) | FLASH_ECC2R_ECCD_Pos) /*!< FLASH ECC detection on bank 2 */ +#endif /* FLASH_DBANK_SUPPORT */ +#define FLASH_FLAG_ECCC FLASH_FLAG_ECCC1 /*!< FLASH ECC correction - legacy name for single bank */ +#define FLASH_FLAG_ECCD FLASH_FLAG_ECCD1 /*!< FLASH ECC detection - legacy name for single bank */ +/** + * @} + */ + +/** @defgroup FLASH_Interrupt_definition FLASH Interrupts Definition + * @brief FLASH Interrupt definition + * @{ + */ +#define FLASH_IT_EOP ((FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS) | FLASH_CR_EOPIE_Pos) /*!< End of FLASH Operation Interrupt source */ +#define FLASH_IT_OPERR ((FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS) | FLASH_CR_ERRIE_Pos) /*!< Error Interrupt source */ +#if defined(FLASH_PCROP_SUPPORT) +#define FLASH_IT_RDERR ((FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS) | FLASH_CR_RDERRIE_Pos) /*!< PCROP Read Error Interrupt source*/ +#endif /* FLASH_PCROP_SUPPORT */ +#define FLASH_IT_ECCC1 ((FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS) | FLASH_ECCR_ECCCIE_Pos) /*!< ECC Correction on Bank 1 Interrupt source */ +#if defined(FLASH_DBANK_SUPPORT) +#define FLASH_IT_ECCC2 ((FLASH_FLAG_ECCR2_ID << FLASH_FLAG_REG_POS) | FLASH_ECC2R_ECCCIE_Pos) /*!< ECC Correction on Bank 2 Interrupt source */ +#endif /* FLASH_DBANK_SUPPORT */ +#define FLASH_IT_ECCC FLASH_IT_ECCC1 /*!< ECC Correction - legacy name for single bank */ +/** + * @} + */ + +/** @defgroup FLASH_Error FLASH Error + * @{ + */ +#define HAL_FLASH_ERROR_NONE 0x00000000U +#define HAL_FLASH_ERROR_OP FLASH_SR_OPERR +#define HAL_FLASH_ERROR_PROG FLASH_SR_PROGERR +#define HAL_FLASH_ERROR_WRP FLASH_SR_WRPERR +#define HAL_FLASH_ERROR_PGA FLASH_SR_PGAERR +#define HAL_FLASH_ERROR_SIZ FLASH_SR_SIZERR +#define HAL_FLASH_ERROR_PGS FLASH_SR_PGSERR +#define HAL_FLASH_ERROR_MIS FLASH_SR_MISERR +#define HAL_FLASH_ERROR_FAST FLASH_SR_FASTERR +#if defined(FLASH_PCROP_SUPPORT) +#define HAL_FLASH_ERROR_RD FLASH_SR_RDERR +#endif /* FLASH_PCROP_SUPPORT */ +#define HAL_FLASH_ERROR_OPTV FLASH_SR_OPTVERR +#define HAL_FLASH_ERROR_ECCD FLASH_ECCR_ECCD +/** + * @} + */ + +/** @defgroup FLASH_Type_Erase FLASH Erase Type + * @{ + */ +#define FLASH_TYPEERASE_PAGES FLASH_CR_PER /*!< Pages erase only */ +#define FLASH_TYPEERASE_MASS FLASH_CR_MER1 /*!< Flash mass erase activation */ +/** + * @} + */ + +/** @defgroup FLASH_Banks FLASH Banks + * @{ + */ +#define FLASH_BANK_1 FLASH_CR_MER1 /*!< Bank 1 */ +#if defined(FLASH_DBANK_SUPPORT) +#define FLASH_BANK_2 FLASH_CR_MER2 /*!< Bank 2 */ +#endif /* FLASH_DBANK_SUPPORT */ +/** + * @} + */ + + +/** @defgroup FLASH_Type_Program FLASH Program Type + * @{ + */ +#define FLASH_TYPEPROGRAM_DOUBLEWORD FLASH_CR_PG /*!< Program a double-word (64-bit) at a specified address */ +#define FLASH_TYPEPROGRAM_FAST FLASH_CR_FSTPG /*!< Fast program a 32 row double-word (64-bit) at a specified address */ +/** + * @} + */ + +/** @defgroup FLASH_OB_Type FLASH Option Bytes Type + * @{ + */ +#define OPTIONBYTE_WRP 0x00000001U /*!< WRP option byte configuration */ +#define OPTIONBYTE_RDP 0x00000002U /*!< RDP option byte configuration */ +#define OPTIONBYTE_USER 0x00000004U /*!< USER option byte configuration */ +#if defined(FLASH_PCROP_SUPPORT) +#define OPTIONBYTE_PCROP 0x00000008U /*!< PCROP option byte configuration */ +#endif /* FLASH_PCROP_SUPPORT */ +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +#define OPTIONBYTE_SEC 0x00000010U /*!< SEC option byte configuration */ +#endif /* FLASH_SECURABLE_MEMORY_SUPPORT */ + +#if defined(FLASH_PCROP_SUPPORT) && defined(FLASH_SECURABLE_MEMORY_SUPPORT) +#define OPTIONBYTE_ALL (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | \ + OPTIONBYTE_PCROP | OPTIONBYTE_SEC) /*!< All option byte configuration */ +#else +#define OPTIONBYTE_ALL (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER) /*!< All option byte configuration */ +#endif /* FLASH_PCROP_SUPPORT && FLASH_SECURABLE_MEMORY_SUPPORT */ +/** + * @} + */ + +/** @defgroup FLASH_OB_WRP_Area FLASH WRP Area + * @{ + */ +#define OB_WRPAREA_ZONE_A 0x00000001U /*!< Flash Zone A */ +#define OB_WRPAREA_ZONE_B 0x00000002U /*!< Flash Zone B */ +#if defined(FLASH_DBANK_SUPPORT) +#define OB_WRPAREA_ZONE2_A 0x00000004U /*!< Flash Bank 2 Zone A */ +#define OB_WRPAREA_ZONE2_B 0x00000008U /*!< Flash Bank 2 Zone B */ +#endif /* FLASH_DBANK_SUPPORT */ +/** + * @} + */ + +/** @defgroup FLASH_OB_Read_Protection FLASH Option Bytes Read Protection + * @{ + */ +#define OB_RDP_LEVEL_0 0x000000AAU +#define OB_RDP_LEVEL_1 0x000000BBU +#define OB_RDP_LEVEL_2 0x000000CCU /*!< Warning: When enabling read protection level 2 + it is no more possible to go back to level 1 or 0 */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_Type FLASH Option Bytes User Type + * @{ + */ +#if defined(PWR_BOR_SUPPORT) +#define OB_USER_BOR_EN FLASH_OPTR_BOR_EN /*!< BOR reset enable */ +#define OB_USER_BOR_LEV (FLASH_OPTR_BORF_LEV | FLASH_OPTR_BORR_LEV) /*!< BOR reset Level */ +#endif /* PWR_BOR_SUPPORT */ +#define OB_USER_nRST_STOP FLASH_OPTR_nRST_STOP /*!< Reset generated when entering the stop mode */ +#define OB_USER_nRST_STDBY FLASH_OPTR_nRST_STDBY /*!< Reset generated when entering the standby mode */ +#if defined(PWR_SHDW_SUPPORT) +#define OB_USER_nRST_SHDW FLASH_OPTR_nRST_SHDW /*!< Reset generated when entering the shutdown mode */ +#endif /* PWR_SHDW_SUPPORT */ +#define OB_USER_IWDG_SW FLASH_OPTR_IWDG_SW /*!< Independent watchdog selection */ +#define OB_USER_IWDG_STOP FLASH_OPTR_IWDG_STOP /*!< Independent watchdog counter freeze in stop mode */ +#define OB_USER_IWDG_STDBY FLASH_OPTR_IWDG_STDBY /*!< Independent watchdog counter freeze in standby mode */ +#define OB_USER_WWDG_SW FLASH_OPTR_WWDG_SW /*!< Window watchdog selection */ +#if defined(FLASH_DBANK_SUPPORT) +#define OB_USER_BANK_SWAP FLASH_OPTR_nSWAP_BANK /*!< Swap bank memory addresses */ +#define OB_USER_DUAL_BANK FLASH_OPTR_DUAL_BANK /*!< Select single or dual bank (depending of device memory size) */ +#endif /* FLASH_DBANK_SUPPORT */ +#define OB_USER_RAM_PARITY_CHECK FLASH_OPTR_RAM_PARITY_CHECK /*!< Sram parity check control */ +#define OB_USER_nBOOT_SEL FLASH_OPTR_nBOOT_SEL /*!< Boot Selection */ +#define OB_USER_nBOOT1 FLASH_OPTR_nBOOT1 /*!< nBoot1 configuration */ +#define OB_USER_nBOOT0 FLASH_OPTR_nBOOT0 /*!< nBoot0 configuration */ +#if defined(GPIO_NRST_CONFIG_SUPPORT) +#define OB_USER_NRST_MODE FLASH_OPTR_NRST_MODE /*!< Reset pin configuration */ +#endif /* GPIO_NRST_CONFIG_SUPPORT */ +#if defined(FLASH_OPTR_IRHEN) +#define OB_USER_INPUT_RESET_HOLDER FLASH_OPTR_IRHEN /*!< Internal reset holder enable */ +#endif /* FLASH_OPTR_IRHEN */ + +#if defined(FLASH_DBANK_SUPPORT) +#if defined(PWR_BOR_SUPPORT) && defined(PWR_SHDW_SUPPORT) && defined(GPIO_NRST_CONFIG_SUPPORT) +#define OB_USER_ALL (OB_USER_BOR_EN | OB_USER_BOR_LEV | OB_USER_nRST_STOP | \ + OB_USER_nRST_STDBY | OB_USER_nRST_SHDW | OB_USER_IWDG_SW | \ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_WWDG_SW | \ + OB_USER_BANK_SWAP | OB_USER_DUAL_BANK | \ + OB_USER_RAM_PARITY_CHECK | OB_USER_nBOOT_SEL | OB_USER_nBOOT1 | \ + OB_USER_nBOOT0 | OB_USER_NRST_MODE | OB_USER_INPUT_RESET_HOLDER) /*!< all option bits */ +#else +#define OB_USER_ALL ( OB_USER_nRST_STOP | \ + OB_USER_nRST_STDBY | OB_USER_IWDG_SW | \ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_WWDG_SW | \ + OB_USER_BANK_SWAP | OB_USER_DUAL_BANK | \ + OB_USER_RAM_PARITY_CHECK | OB_USER_nBOOT_SEL | OB_USER_nBOOT1 | \ + OB_USER_nBOOT0) /*!< all option bits */ +#endif /* PWR_BOR_SUPPORT && PWR_SHDW_SUPPORT && GPIO_NRST_CONFIG_SUPPORT */ +#else +#if defined(PWR_BOR_SUPPORT) && defined(PWR_SHDW_SUPPORT) && defined(GPIO_NRST_CONFIG_SUPPORT) +#define OB_USER_ALL (OB_USER_BOR_EN | OB_USER_BOR_LEV | OB_USER_nRST_STOP | \ + OB_USER_nRST_STDBY | OB_USER_nRST_SHDW | OB_USER_IWDG_SW | \ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_WWDG_SW | \ + OB_USER_RAM_PARITY_CHECK | OB_USER_nBOOT_SEL | OB_USER_nBOOT1 | \ + OB_USER_nBOOT0 | OB_USER_NRST_MODE | OB_USER_INPUT_RESET_HOLDER) /*!< all option bits */ +#else +#define OB_USER_ALL ( OB_USER_nRST_STOP | \ + OB_USER_nRST_STDBY | OB_USER_IWDG_SW | \ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_WWDG_SW | \ + OB_USER_RAM_PARITY_CHECK | OB_USER_nBOOT_SEL | OB_USER_nBOOT1 | \ + OB_USER_nBOOT0) /*!< all option bits */ +#endif /* PWR_BOR_SUPPORT && PWR_SHDW_SUPPORT && GPIO_NRST_CONFIG_SUPPORT */ +#endif /* FLASH_DBANK_SUPPORT */ +/** + * @} + */ + +#if defined(PWR_BOR_SUPPORT) +/** @defgroup FLASH_OB_USER_BOR_ENABLE FLASH Option Bytes User BOR enable + * @{ + */ +#define OB_BOR_DISABLE 0x00000000U /*!< BOR Reset set to default */ +#define OB_BOR_ENABLE FLASH_OPTR_BOR_EN /*!< Use option byte to define BOR thresholds */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_BOR_LEVEL FLASH Option Bytes User BOR Level + * @{ + */ +#define OB_BOR_LEVEL_FALLING_0 0x00000000U /*!< BOR falling level 1 with threshold around 2.0V */ +#define OB_BOR_LEVEL_FALLING_1 FLASH_OPTR_BORF_LEV_0 /*!< BOR falling level 2 with threshold around 2.2V */ +#define OB_BOR_LEVEL_FALLING_2 FLASH_OPTR_BORF_LEV_1 /*!< BOR falling level 3 with threshold around 2.5V */ +#define OB_BOR_LEVEL_FALLING_3 (FLASH_OPTR_BORF_LEV_0 | FLASH_OPTR_BORF_LEV_1) /*!< BOR falling level 4 with threshold around 2.8V */ +#define OB_BOR_LEVEL_RISING_0 0x00000000U /*!< BOR rising level 1 with threshold around 2.1V */ +#define OB_BOR_LEVEL_RISING_1 FLASH_OPTR_BORR_LEV_0 /*!< BOR rising level 2 with threshold around 2.3V */ +#define OB_BOR_LEVEL_RISING_2 FLASH_OPTR_BORR_LEV_1 /*!< BOR rising level 3 with threshold around 2.6V */ +#define OB_BOR_LEVEL_RISING_3 (FLASH_OPTR_BORR_LEV_0 | FLASH_OPTR_BORR_LEV_1) /*!< BOR rising level 4 with threshold around 2.9V */ +/** + * @} + */ +#endif /* PWR_BOR_SUPPORT */ + +/** @defgroup FLASH_OB_USER_nRST_STOP FLASH Option Bytes User Reset On Stop + * @{ + */ +#define OB_STOP_RST 0x00000000U /*!< Reset generated when entering the stop mode */ +#define OB_STOP_NORST FLASH_OPTR_nRST_STOP /*!< No reset generated when entering the stop mode */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_nRST_STANDBY FLASH Option Bytes User Reset On Standby + * @{ + */ +#define OB_STANDBY_RST 0x00000000U /*!< Reset generated when entering the standby mode */ +#define OB_STANDBY_NORST FLASH_OPTR_nRST_STDBY /*!< No reset generated when entering the standby mode */ +/** + * @} + */ + +#if defined(PWR_SHDW_SUPPORT) +/** @defgroup FLASH_OB_USER_nRST_SHUTDOWN FLASH Option Bytes User Reset On Shutdown + * @{ + */ +#define OB_SHUTDOWN_RST 0x00000000U /*!< Reset generated when entering the shutdown mode */ +#define OB_SHUTDOWN_NORST FLASH_OPTR_nRST_SHDW /*!< No reset generated when entering the shutdown mode */ +/** + * @} + */ +#endif /* PWR_SHDW_SUPPORT */ + +/** @defgroup FLASH_OB_USER_IWDG_SW FLASH Option Bytes User IWDG Type + * @{ + */ +#define OB_IWDG_HW 0x00000000U /*!< Hardware independent watchdog */ +#define OB_IWDG_SW FLASH_OPTR_IWDG_SW /*!< Software independent watchdog */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_IWDG_STOP FLASH Option Bytes User IWDG Mode On Stop + * @{ + */ +#define OB_IWDG_STOP_FREEZE 0x00000000U /*!< Independent watchdog counter is frozen in Stop mode */ +#define OB_IWDG_STOP_RUN FLASH_OPTR_IWDG_STOP /*!< Independent watchdog counter is running in Stop mode */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_IWDG_STANDBY FLASH Option Bytes User IWDG Mode On Standby + * @{ + */ +#define OB_IWDG_STDBY_FREEZE 0x00000000U /*!< Independent watchdog counter is frozen in Standby mode */ +#define OB_IWDG_STDBY_RUN FLASH_OPTR_IWDG_STDBY /*!< Independent watchdog counter is running in Standby mode */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_WWDG_SW FLASH Option Bytes User WWDG Type + * @{ + */ +#define OB_WWDG_HW 0x00000000U /*!< Hardware window watchdog */ +#define OB_WWDG_SW FLASH_OPTR_WWDG_SW /*!< Software window watchdog */ +/** + * @} + */ + +#if defined(FLASH_DBANK_SUPPORT) +/** @defgroup FLASH_OB_USER_BANK_SWAP FLASH Option Bytes User bank swap Type + * @{ + */ +#define OB_USER_DUALBANK_SWAP_ENABLE 0x00000000U /*!< Enable bank swap */ +#define OB_USER_DUALBANK_SWAP_DISABLE FLASH_OPTR_nSWAP_BANK /*!< Disable bank swap */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_DUAL_BANK FLASH Option Bytes User dual bank enable Type + * @{ + */ +#define OB_USER_DUALBANK_DISABLE 0x00000000U /*!< Disable dual bank */ +#define OB_USER_DUALBANK_ENABLE FLASH_OPTR_DUAL_BANK /*!< Enable dual bank */ +/** + * @} + */ +#endif /* FLASH_DBANK_SUPPORT */ + +/** @defgroup FLASH_OB_USER_SRAM_PARITY FLASH Option Bytes User SRAM parity + * @{ + */ +#define OB_SRAM_PARITY_ENABLE 0x00000000U /*!< Sram parity enable */ +#define OB_SRAM_PARITY_DISABLE FLASH_OPTR_RAM_PARITY_CHECK /*!< Sram parity disable */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_nBOOT_SEL FLASH Option Bytes User Boot0 Selection + * @{ + */ +#define OB_BOOT0_FROM_PIN 0x00000000U /*!< BOOT0 signal is defined by PA14/BOOT0 pin value */ +#define OB_BOOT0_FROM_OB FLASH_OPTR_nBOOT_SEL /*!< BOOT0 signal is defined by nBOOT0 option bit */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_nBOOT1 FLASH Option Bytes User BOOT1 Type + * @{ + */ +#define OB_BOOT1_SRAM 0x00000000U /*!< Embedded SRAM is selected as boot space (if nBOOT0=0 or BOOT0_pin=1) */ +#define OB_BOOT1_SYSTEM FLASH_OPTR_nBOOT1 /*!< System memory is selected as boot space (if nBOOT0=0 or BOOT0_pin=1) */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_nBOOT0 FLASH Option Bytes User nBOOT0 option bit + * @{ + */ +#define OB_nBOOT0_RESET 0x00000000U /*!< nBOOT0 = 0 */ +#define OB_nBOOT0_SET FLASH_OPTR_nBOOT0 /*!< nBOOT0 = 1 */ +/** + * @} + */ + +#if defined(GPIO_NRST_CONFIG_SUPPORT) +/** @defgroup FLASH_OB_USER_RESET_CONFIG FLASH Option Bytes User reset config bit + * @{ + */ +#define OB_RESET_MODE_INPUT_ONLY FLASH_OPTR_NRST_MODE_0 /*!< Reset pin is in Reset input mode only */ +#define OB_RESET_MODE_GPIO FLASH_OPTR_NRST_MODE_1 /*!< Reset pin is in GPIO mode mode only */ +#define OB_RESET_MODE_INPUT_OUTPUT FLASH_OPTR_NRST_MODE /*!< Reset pin is in reset input and output mode */ +/** + * @} + */ +#endif /* GPIO_NRST_CONFIG_SUPPORT */ + +#if defined(FLASH_OPTR_IRHEN) +/** @defgroup FLASH_OB_USER_INPUT_RESET_HOLDER FLASH Option Bytes User input reset holder bit + * @{ + */ +#define OB_IRH_ENABLE 0x00000000U /*!< Internal Reset handler enable */ +#define OB_IRH_DISABLE FLASH_OPTR_IRHEN /*!< Internal Reset handler disable */ +/** + * @} + */ +#endif /* FLASH_OPTR_IRHEN */ + +#if defined(FLASH_PCROP_SUPPORT) +/** @defgroup FLASH_OB_PCROP_ZONE FLASH Option Bytes PCROP ZONE + * @{ + */ +#define OB_PCROP_ZONE_A 0x00000001U /*!< PCROP Zone A */ +#define OB_PCROP_ZONE_B 0x00000002U /*!< PCROP Zone B */ +#if defined(FLASH_DBANK_SUPPORT) +#define OB_PCROP_ZONE2_A 0x00000004U /*!< PCROP Bank 2 Zone A */ +#define OB_PCROP_ZONE2_B 0x00000008U /*!< PCROP Bank 2 Zone B */ +#endif /* FLASH_DBANK_SUPPORT */ +/** + * @} + */ + +/** @defgroup FLASH_OB_PCROP_RDP FLASH Option Bytes PCROP On RDP Level Type + * @{ + */ +#define OB_PCROP_RDP_NOT_ERASE 0x00000000U /*!< PCROP area is not erased when the RDP level + is decreased from Level 1 to Level 0 */ +#define OB_PCROP_RDP_ERASE FLASH_PCROP1AER_PCROP_RDP /*!< PCROP area is erased when the RDP level is + decreased from Level 1 to Level 0 (full mass erase). + Once this bit is set only, it will be reset by mass erase */ +/** + * @} + */ +#endif /* FLASH_PCROP_SUPPORT */ + +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +/** @defgroup FLASH_OB_SEC_BOOT_LOCK FLASH Option Bytes Secure boot lock + * @{ + */ +#define OB_BOOT_ENTRY_FORCED_NONE 0x00000000U /*!< Boot entry is free */ +#define OB_BOOT_ENTRY_FORCED_FLASH FLASH_SECR_BOOT_LOCK /*!< Boot entry is forced to Flash or System Flash */ +/** + * @} + */ +#endif /* FLASH_SECURABLE_MEMORY_SUPPORT */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Macros FLASH Exported Macros + * @brief macros to control FLASH features + * @{ + */ + +/** + * @brief Set the FLASH Latency. + * @param __LATENCY__ FLASH Latency + * This parameter can be one of the following values : + * @arg @ref FLASH_LATENCY_0 FLASH Zero wait state + * @arg @ref FLASH_LATENCY_1 FLASH One wait state + * @arg @ref FLASH_LATENCY_2 FLASH Two wait states + * @retval None + */ +#define __HAL_FLASH_SET_LATENCY(__LATENCY__) MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (__LATENCY__)) + +/** + * @brief Get the FLASH Latency. + * @retval FLASH Latency + * Returned value can be one of the following values : + * @arg @ref FLASH_LATENCY_0 FLASH Zero wait state + * @arg @ref FLASH_LATENCY_1 FLASH One wait state + * @arg @ref FLASH_LATENCY_2 FLASH Two wait states + */ +#define __HAL_FLASH_GET_LATENCY() READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY) + +/** + * @brief Enable the FLASH prefetch buffer. + * @retval None + */ +#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) + +/** + * @brief Disable the FLASH prefetch buffer. + * @retval None + */ +#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) + +/** + * @brief Enable the FLASH instruction cache. + * @retval none + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_ICEN) + +/** + * @brief Disable the FLASH instruction cache. + * @retval none + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICEN) + +/** + * @brief Reset the FLASH instruction Cache. + * @note This function must be used only when the Instruction Cache is disabled. + * @retval None + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do { SET_BIT(FLASH->ACR, FLASH_ACR_ICRST); \ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICRST); \ + } while (0U) +/** + * @} + */ + +/** @defgroup FLASH_Interrupt FLASH Interrupts Macros + * @brief macros to handle FLASH interrupts + * @{ + */ + +/** + * @brief Enable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be one of the following values : + * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt + * @arg @ref FLASH_IT_OPERR Error Interrupt + * @arg @ref FLASH_IT_RDERR PCROP Read Error Interrupt(*) + * @arg @ref FLASH_IT_ECCC1 ECC Correction Interrupt on bank 1 + * @arg @ref FLASH_IT_ECCC2 ECC Correction Interrupt on bank 2(*) + * @arg @ref FLASH_IT_ECCC ECC Correction Interrupt - legacy name for single bank + * @note (*) availability depends on devices + * @retval none + */ +#if defined(FLASH_DBANK_SUPPORT) +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & (FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS)) != 0U) { SET_BIT(FLASH->CR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + else if(((__INTERRUPT__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) { SET_BIT(FLASH->ECCR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + else if(((__INTERRUPT__) & (FLASH_FLAG_ECCR2_ID << FLASH_FLAG_REG_POS)) != 0U) { SET_BIT(FLASH->ECC2R, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + } while(0U) +#else +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & (FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS)) != 0U) { SET_BIT(FLASH->CR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + else if(((__INTERRUPT__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) { SET_BIT(FLASH->ECCR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + } while(0U) +#endif /* FLASH_DBANK_SUPPORT */ + +/** + * @brief Disable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be one of the following values : + * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt + * @arg @ref FLASH_IT_OPERR Error Interrupt + * @arg @ref FLASH_IT_RDERR PCROP Read Error Interrupt(*) + * @arg @ref FLASH_IT_ECCC1 ECC Correction Interrupt on bank 1 + * @arg @ref FLASH_IT_ECCC2 ECC Correction Interrupt on bank 2(*) + * @arg @ref FLASH_IT_ECCC ECC Correction Interrupt - legacy name for single bank + * @note (*) availability depends on devices + * @retval none + */ +#if defined(FLASH_DBANK_SUPPORT) +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & (FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS)) != 0U) { CLEAR_BIT(FLASH->CR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + else if(((__INTERRUPT__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) { CLEAR_BIT(FLASH->ECCR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + else if(((__INTERRUPT__) & (FLASH_FLAG_ECCR2_ID << FLASH_FLAG_REG_POS)) != 0U) { CLEAR_BIT(FLASH->ECC2R, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + } while(0U) +#else +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & (FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS)) != 0U) { CLEAR_BIT(FLASH->CR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + else if(((__INTERRUPT__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) { CLEAR_BIT(FLASH->ECCR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \ + } while(0U) +#endif /* FLASH_DBANK_SUPPORT */ + +/** + * @brief Check whether the specified FLASH flag is set or not. + * @param __FLAG__ specifies the FLASH flag to check. + * This parameter can be one of the following values : + * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag + * @arg @ref FLASH_FLAG_OPERR FLASH Operation error flag + * @arg @ref FLASH_FLAG_PROGERR FLASH Programming error flag + * @arg @ref FLASH_FLAG_WRPERR FLASH Write protection error flag + * @arg @ref FLASH_FLAG_PGAERR FLASH Programming alignment error flag + * @arg @ref FLASH_FLAG_SIZERR FLASH Size error flag + * @arg @ref FLASH_FLAG_PGSERR FLASH Programming sequence error flag + * @arg @ref FLASH_FLAG_MISERR FLASH Fast programming data miss error flag + * @arg @ref FLASH_FLAG_FASTERR FLASH Fast programming error flag + * @arg @ref FLASH_FLAG_RDERR FLASH PCROP read error flag(*) + * @arg @ref FLASH_FLAG_OPTVERR FLASH Option validity error flag + * @arg @ref FLASH_FLAG_BSY1 FLASH bank 1 write/erase operations in progress flag + * @arg @ref FLASH_FLAG_BSY2 FLASH bank 2 write/erase operations in progress flag(*) + * @arg @ref FLASH_FLAG_BSY FLASH write/erase operations in progress flag - legacy name for single bank + * @arg @ref FLASH_FLAG_CFGBSY FLASH configuration is busy : program or erase setting are used. + * @arg @ref FLASH_FLAG_ECCC1 FLASH one ECC error has been detected and corrected + * @arg @ref FLASH_FLAG_ECCD1 FLASH two ECC errors have been detected on bank 1 + * @arg @ref FLASH_FLAG_ECCC2 FLASH one ECC error has been detected and corrected on bank 2(*) + * @arg @ref FLASH_FLAG_ECCD2 FLASH two ECC errors have been detected on bank 2(*) + * @arg @ref FLASH_FLAG_ECCC FLASH one ECC error has been detected and corrected - legacy name for single bank + * @arg @ref FLASH_FLAG_ECCD FLASH two ECC errors have been detected - legacy name for single bank + * @note (*) availability depends on devices + * @retval The state of FLASH_FLAG (SET or RESET). + */ +#if defined(FLASH_DBANK_SUPPORT) +#define __HAL_FLASH_GET_FLAG(__FLAG__) ((((__FLAG__) & (FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS)) != 0U) ? \ + (READ_BIT(FLASH->SR, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u) : \ + ((((__FLAG__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) ? \ + (READ_BIT(FLASH->ECCR, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u) : \ + (READ_BIT(FLASH->ECC2R, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u))) +#else +#define __HAL_FLASH_GET_FLAG(__FLAG__) ((((__FLAG__) & (FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS)) != 0U) ? \ + (READ_BIT(FLASH->SR, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u) : \ + (READ_BIT(FLASH->ECCR, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u)) +#endif /* FLASH_DBANK_SUPPORT */ + +/** + * @brief Clear the FLASH pending flag. + * @param __FLAG__ specifies the FLASH flag to clear. + * This parameter can be one of the following values : + * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag + * @arg @ref FLASH_FLAG_OPERR FLASH Operation error flag + * @arg @ref FLASH_FLAG_PROGERR FLASH Programming error flag + * @arg @ref FLASH_FLAG_WRPERR FLASH Write protection error flag + * @arg @ref FLASH_FLAG_PGAERR FLASH Programming alignment error flag + * @arg @ref FLASH_FLAG_SIZERR FLASH Size error flag + * @arg @ref FLASH_FLAG_PGSERR FLASH Programming sequence error flag + * @arg @ref FLASH_FLAG_MISERR FLASH Fast programming data miss error flag + * @arg @ref FLASH_FLAG_FASTERR FLASH Fast programming error flag + * @arg @ref FLASH_FLAG_RDERR FLASH PCROP read error flag + * @arg @ref FLASH_FLAG_OPTVERR FLASH Option validity error flag + * @arg @ref FLASH_FLAG_ECCC1 FLASH one ECC error has been detected and corrected + * @arg @ref FLASH_FLAG_ECCD1 FLASH two ECC errors have been detected on bank 1 + * @arg @ref FLASH_FLAG_ECCC2 FLASH one ECC error has been detected and corrected on bank 2(*) + * @arg @ref FLASH_FLAG_ECCD2 FLASH two ECC errors have been detected on bank 2(*) + * @arg @ref FLASH_FLAG_ECCC FLASH one ECC error has been detected and corrected - legacy name for single bank + * @arg @ref FLASH_FLAG_ECCD FLASH two ECC errors have been detected - legacy name for single bank + * @note (*) availability depends on devices + * @retval None + */ +#if defined(FLASH_DBANK_SUPPORT) +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { if(((__FLAG__) & (FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS)) != 0U) { FLASH->SR = (1uL << ((__FLAG__) & 0x1Fu)); } \ + else if(((__FLAG__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) { FLASH->ECCR |= (1uL << ((__FLAG__) & 0x1Fu)); } \ + else if(((__FLAG__) & (FLASH_FLAG_ECCR2_ID << FLASH_FLAG_REG_POS)) != 0U) { FLASH->ECC2R |= (1uL << ((__FLAG__) & 0x1Fu)); } \ + } while(0U) +#else +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { if(((__FLAG__) & (FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS)) != 0U) { FLASH->SR = (1uL << ((__FLAG__) & 0x1Fu)); } \ + else if(((__FLAG__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) { FLASH->ECCR |= (1uL << ((__FLAG__) & 0x1Fu)); } \ + } while(0U) +#endif /* FLASH_DBANK_SUPPORT */ +/** + * @} + */ + +/* Include FLASH HAL Extended module */ +#include "stm32g0xx_hal_flash_ex.h" +/* Exported variables --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Variables FLASH Exported Variables + * @{ + */ +extern FLASH_ProcessTypeDef pFlash; +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASH_Exported_Functions + * @{ + */ + +/* Program operation functions ***********************************************/ +/** @addtogroup FLASH_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); +/* FLASH IRQ handler method */ +void HAL_FLASH_IRQHandler(void); +/* Callbacks in non blocking modes */ +void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); +void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); +/** + * @} + */ + +/* Peripheral Control functions **********************************************/ +/** @addtogroup FLASH_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_Lock(void); +/* Option bytes control */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); +/** + * @} + */ + +/* Peripheral State functions ************************************************/ +/** @addtogroup FLASH_Exported_Functions_Group3 + * @{ + */ +uint32_t HAL_FLASH_GetError(void); +/** + * @} + */ + +/** + * @} + */ + +/* Private types --------------------------------------------------------*/ +/** @defgroup FLASH_Private_types FLASH Private Types + * @{ + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); +/** + * @} + */ + +/* Private constants --------------------------------------------------------*/ +/** @defgroup FLASH_Private_Constants FLASH Private Constants + * @{ + */ +#define FLASH_SIZE_DATA_REGISTER FLASHSIZE_BASE + +#if defined(FLASH_DBANK_SUPPORT) +#define OB_DUAL_BANK_BASE (FLASH_R_BASE + 0x20U) /*!< Not use cmsis FLASH alias to avoid iar warning about volatile reading sequence */ +#define FLASH_SALES_TYPE_Pos (24U) +#define FLASH_SALES_TYPE (0x3UL << FLASH_SALES_TYPE_Pos) /*!< 0x000001E0 */ +#define FLASH_SALES_TYPE_0 (0x1UL << FLASH_SALES_TYPE_Pos) /*!< 0x01000000 */ +#define FLASH_SALES_TYPE_1 (0x2UL << FLASH_SALES_TYPE_Pos) /*!< 0x02000000 */ +#define FLASH_SALES_VALUE ((*((uint32_t *)PACKAGE_BASE)) & (FLASH_SALES_TYPE)) +#define OB_DUAL_BANK_VALUE ((*((uint32_t *)OB_DUAL_BANK_BASE)) & (FLASH_OPTR_DUAL_BANK)) +#define FLASH_BANK_NB (((FLASH_SALES_VALUE == 0U)\ + || ((FLASH_SALES_VALUE == FLASH_SALES_TYPE_0) && (OB_DUAL_BANK_VALUE == 0U)))?1U:2U) +#define FLASH_BANK_SIZE ((FLASH_BANK_NB==1U)?(FLASH_SIZE):(FLASH_SIZE >> 1U)) /*!< FLASH Bank Size. Divided by 2 if 2 Banks */ +#else /* FLASH_DBANK_SUPPORT */ +#define FLASH_BANK_SIZE (FLASH_SIZE) /*!< FLASH Bank Size */ +#endif /* FLASH_DBANK_SUPPORT */ + +#define FLASH_PAGE_SIZE 0x00000800U /*!< FLASH Page Size, 2 KBytes */ +#define FLASH_PAGE_NB (FLASH_BANK_SIZE/FLASH_PAGE_SIZE) /* Number of pages per bank */ +#define FLASH_TIMEOUT_VALUE 1000U /*!< FLASH Execution Timeout, 1 s */ +#define FLASH_TYPENONE 0x00000000U /*!< No programming Procedure On Going */ + +#if defined(FLASH_PCROP_SUPPORT) +#define FLASH_SR_ERRORS (FLASH_SR_OPERR | FLASH_SR_PROGERR | FLASH_SR_WRPERR | \ + FLASH_SR_PGAERR | FLASH_SR_SIZERR | FLASH_SR_PGSERR | \ + FLASH_SR_MISERR | FLASH_SR_FASTERR | FLASH_SR_RDERR | \ + FLASH_SR_OPTVERR) /*!< All SR error flags */ +#else +#define FLASH_SR_ERRORS (FLASH_SR_OPERR | FLASH_SR_PROGERR | FLASH_SR_WRPERR | \ + FLASH_SR_PGAERR | FLASH_SR_SIZERR | FLASH_SR_PGSERR | \ + FLASH_SR_MISERR | FLASH_SR_FASTERR | \ + FLASH_SR_OPTVERR) /*!< All SR error flags */ +#endif /* FLASH_PCROP_SUPPORT */ + +#if defined(FLASH_DBANK_SUPPORT) +#define FLASH_SR_CLEAR (FLASH_SR_ERRORS | FLASH_SR_EOP | FLASH_SR_PESD) +#else +#define FLASH_SR_CLEAR (FLASH_SR_ERRORS | FLASH_SR_EOP) +#endif /* FLASH_DBANK_SUPPORT */ + +/* Internal defines for HAL macro usage */ +#define FLASH_FLAG_REG_POS 16u +#define FLASH_FLAG_SR_ID 1u +#define FLASH_FLAG_CR_ID 2u +#define FLASH_FLAG_ECCR1_ID 4u +#define FLASH_FLAG_ECCR2_ID 8u + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FLASH_Private_Macros FLASH Private Macros + * @{ + */ +#define IS_FLASH_MAIN_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE))\ + && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 1UL))) + +#define IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE))\ + && ((__ADDRESS__) <= (FLASH_BASE + FLASH_BANK_SIZE - 1UL))) +#if defined(FLASH_DBANK_SUPPORT) +#define IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE + FLASH_BANK_SIZE))\ + && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 1UL))) +#endif /* FLASH_DBANK_SUPPORT */ + +#define IS_FLASH_PROGRAM_MAIN_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE))\ + && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 8UL))) + +#define IS_FLASH_PROGRAM_OTP_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= 0x1FFF7000U)\ + && ((__ADDRESS__) <= (0x1FFF7400U - 8UL))) + +#define IS_FLASH_PROGRAM_ADDRESS(__ADDRESS__) ((IS_FLASH_PROGRAM_MAIN_MEM_ADDRESS(__ADDRESS__))\ + || (IS_FLASH_PROGRAM_OTP_ADDRESS(__ADDRESS__))) + +#define IS_FLASH_FAST_PROGRAM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE))\ + && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 256UL))) + +#define IS_FLASH_PAGE(__PAGE__) ((__PAGE__) < FLASH_PAGE_NB) + +#if defined(FLASH_DBANK_SUPPORT) +#define IS_FLASH_BANK(__BANK__) \ + ((FLASH_BANK_NB == 2U) ? \ + (((__BANK__) == FLASH_BANK_1) || \ + ((__BANK__) == FLASH_BANK_2) || \ + ((__BANK__) == (FLASH_BANK_2 | FLASH_BANK_1))): \ + ((__BANK__) == FLASH_BANK_1)) +#else +#define IS_FLASH_BANK(__BANK__) ((__BANK__) == FLASH_BANK_1) +#endif /* FLASH_DBANK_SUPPORT */ + +#define IS_FLASH_TYPEERASE(__VALUE__) (((__VALUE__) == FLASH_TYPEERASE_PAGES) || \ + ((__VALUE__) == FLASH_TYPEERASE_MASS)) + +#define IS_FLASH_TYPEPROGRAM(__VALUE__) (((__VALUE__) == FLASH_TYPEPROGRAM_DOUBLEWORD) || \ + ((__VALUE__) == FLASH_TYPEPROGRAM_FAST)) + +#define IS_OPTIONBYTE(__VALUE__) ((((__VALUE__) & OPTIONBYTE_ALL) != 0x00U) && \ + (((__VALUE__) & ~OPTIONBYTE_ALL) == 0x00U)) + +#if defined(FLASH_DBANK_SUPPORT) +#define IS_OB_WRPAREA(__VALUE__) \ + ((FLASH_BANK_NB == 2U) ? \ + (((__VALUE__) == OB_WRPAREA_ZONE_A) || ((__VALUE__) == OB_WRPAREA_ZONE_B) || \ + ((__VALUE__) == OB_WRPAREA_ZONE2_A) || ((__VALUE__) == OB_WRPAREA_ZONE2_B)) : \ + (((__VALUE__) == OB_WRPAREA_ZONE_A) || ((__VALUE__) == OB_WRPAREA_ZONE_B))) +#else +#define IS_OB_WRPAREA(__VALUE__) (((__VALUE__) == OB_WRPAREA_ZONE_A)\ + || ((__VALUE__) == OB_WRPAREA_ZONE_B)) +#endif /* FLASH_DBANK_SUPPORT */ + +#define IS_OB_RDP_LEVEL(__LEVEL__) (((__LEVEL__) == OB_RDP_LEVEL_0) ||\ + ((__LEVEL__) == OB_RDP_LEVEL_1) ||\ + ((__LEVEL__) == OB_RDP_LEVEL_2)) + +#define IS_OB_USER_TYPE(__TYPE__) ((((__TYPE__) & OB_USER_ALL) != 0x00U) && \ + (((__TYPE__) & ~OB_USER_ALL) == 0x00U)) + +#define IS_OB_USER_CONFIG(__TYPE__,__CONFIG__) ((~(__TYPE__) & (__CONFIG__)) == 0x00U) + +#if defined(FLASH_PCROP_SUPPORT) +#if defined(FLASH_DBANK_SUPPORT) +#define IS_OB_PCROP_CONFIG(__CONFIG__) \ + ((FLASH_BANK_NB == 2U) ? \ + (((__CONFIG__) & ~(OB_PCROP_ZONE_A | OB_PCROP_ZONE_B | \ + OB_PCROP_ZONE2_A | OB_PCROP_ZONE2_B | OB_PCROP_RDP_ERASE)) == 0x00U): \ + (((__CONFIG__) & ~(OB_PCROP_ZONE_A | OB_PCROP_ZONE_B | OB_PCROP_RDP_ERASE)) == 0x00U)) +#else +#define IS_OB_PCROP_CONFIG(__CONFIG__) (((__CONFIG__)\ + & ~(OB_PCROP_ZONE_A | OB_PCROP_ZONE_B | OB_PCROP_RDP_ERASE)) == 0x00U) +#endif /* FLASH_DBANK_SUPPORT */ +#endif /* FLASH_PCROP_SUPPORT */ + +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +#define IS_OB_SEC_BOOT_LOCK(__VALUE__) (((__VALUE__) == OB_BOOT_ENTRY_FORCED_NONE)\ + || ((__VALUE__) == OB_BOOT_ENTRY_FORCED_FLASH)) + +#define IS_OB_SEC_SIZE(__VALUE__) ((__VALUE__) < (FLASH_PAGE_NB + 1U)) +#endif /* FLASH_SECURABLE_MEMORY_SUPPORT */ + +#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \ + ((__LATENCY__) == FLASH_LATENCY_1) || \ + ((__LATENCY__) == FLASH_LATENCY_2)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_FLASH_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ex.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ex.h new file mode 100644 index 0000000..6df8410 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ex.h @@ -0,0 +1,116 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_flash_ex.h + * @author MCD Application Team + * @brief Header file of FLASH HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_FLASH_EX_H +#define STM32G0xx_HAL_FLASH_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASHEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants + * @{ + */ +/** @defgroup FLASHEx_Empty_Check FLASHEx Empty Check + * @{ + */ +#define FLASH_PROG_NOT_EMPTY 0x00000000u /*!< 1st location in Flash is programmed */ +#define FLASH_PROG_EMPTY FLASH_ACR_PROGEMPTY /*!< 1st location in Flash is empty */ +/** + * @} + */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASHEx_Exported_Functions + * @{ + */ + +/* Extended Program operation functions *************************************/ +/** @addtogroup FLASHEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError); +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit); +void HAL_FLASHEx_EnableDebugger(void); +void HAL_FLASHEx_DisableDebugger(void); +uint32_t HAL_FLASHEx_FlashEmptyCheck(void); +void HAL_FLASHEx_ForceFlashEmpty(uint32_t FlashEmpty); +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +void HAL_FLASHEx_EnableSecMemProtection(uint32_t Banks); +#endif /* FLASH_SECURABLE_MEMORY_SUPPORT */ +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit); +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FLASHEx_Private_Constants FLASHEx Private Constants + * @{ + */ +#define FLASH_PCROP_GRANULARITY_OFFSET 9u /*!< FLASH Code Readout Protection granularity offset */ +#define FLASH_PCROP_GRANULARITY (1UL << FLASH_PCROP_GRANULARITY_OFFSET) /*!< FLASH Code Readout Protection granularity, 512 Bytes */ +/** + * @} + */ + + +/** @defgroup FLASHEx_Private_Macros FLASHEx Private Macros + * @{ + */ +#define IS_FLASH_EMPTY_CHECK(__VALUE__) (((__VALUE__) == FLASH_PROG_EMPTY) || ((__VALUE__) == FLASH_PROG_NOT_EMPTY)) +void FLASH_PageErase(uint32_t Banks, uint32_t Page); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_FLASH_EX_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio.h new file mode 100644 index 0000000..3768993 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio.h @@ -0,0 +1,362 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_GPIO_H +#define STM32G0xx_HAL_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIO GPIO + * @brief GPIO HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Types GPIO Exported Types + * @{ + */ +/** + * @brief GPIO Init structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_mode */ + + uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. + This parameter can be a value of @ref GPIO_pull */ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_speed */ + + uint32_t Alternate; /*!< Peripheral to be connected to the selected pins + This parameter can be a value of @ref GPIOEx_Alternate_function_selection */ +} GPIO_InitTypeDef; + +/** + * @brief GPIO Bit SET and Bit RESET enumeration + */ +typedef enum +{ + GPIO_PIN_RESET = 0U, + GPIO_PIN_SET +} GPIO_PinState; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Constants GPIO Exported Constants + * @{ + */ +/** @defgroup GPIO_pins GPIO pins + * @{ + */ +#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */ +#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */ +#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */ +#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */ +#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */ +#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */ +#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */ +#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */ +#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */ +#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */ +#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */ +#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */ +#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */ +#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */ +#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */ +#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */ +#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */ + +#define GPIO_PIN_MASK (0x0000FFFFu) /* PIN mask for assert test */ +/** + * @} + */ + +/** @defgroup GPIO_mode GPIO mode + * @brief GPIO Configuration Mode + * Elements values convention: 0x00WX00YZ + * - W : EXTI trigger detection on 3 bits + * - X : EXTI mode (IT or Event) on 2 bits + * - Y : Output type (Push Pull or Open Drain) on 1 bit + * - Z : GPIO mode (Input, Output, Alternate or Analog) on 2 bits + * @{ + */ +#define GPIO_MODE_INPUT MODE_INPUT /*!< Input Floating Mode */ +#define GPIO_MODE_OUTPUT_PP (MODE_OUTPUT | OUTPUT_PP) /*!< Output Push Pull Mode */ +#define GPIO_MODE_OUTPUT_OD (MODE_OUTPUT | OUTPUT_OD) /*!< Output Open Drain Mode */ +#define GPIO_MODE_AF_PP (MODE_AF | OUTPUT_PP) /*!< Alternate Function Push Pull Mode */ +#define GPIO_MODE_AF_OD (MODE_AF | OUTPUT_OD) /*!< Alternate Function Open Drain Mode */ +#define GPIO_MODE_ANALOG MODE_ANALOG /*!< Analog Mode */ +#define GPIO_MODE_IT_RISING (MODE_INPUT | EXTI_IT | TRIGGER_RISING) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define GPIO_MODE_IT_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_FALLING) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define GPIO_MODE_IT_RISING_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING) /*!< External Event Mode with Rising edge trigger detection */ +#define GPIO_MODE_EVT_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING) /*!< External Event Mode with Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + +/** @defgroup GPIO_speed GPIO speed + * @brief GPIO Output Maximum frequency + * @{ + */ +#define GPIO_SPEED_FREQ_LOW 0x00000000u /*!< Low speed */ +#define GPIO_SPEED_FREQ_MEDIUM 0x00000001u /*!< Medium speed */ +#define GPIO_SPEED_FREQ_HIGH 0x00000002u /*!< High speed */ +#define GPIO_SPEED_FREQ_VERY_HIGH 0x00000003u /*!< Very high speed */ +/** + * @} + */ + +/** @defgroup GPIO_pull GPIO pull + * @brief GPIO Pull-Up or Pull-Down Activation + * @{ + */ +#define GPIO_NOPULL 0x00000000u /*!< No Pull-up or Pull-down activation */ +#define GPIO_PULLUP 0x00000001u /*!< Pull-up activation */ +#define GPIO_PULLDOWN 0x00000002u /*!< Pull-down activation */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** + * @brief Check whether the specified EXTI line is rising edge asserted or not. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_RISING_IT(__EXTI_LINE__) (EXTI->RPR1 & (__EXTI_LINE__)) + +/** + * @brief Clear the EXTI line rising pending bits. + * @param __EXTI_LINE__ specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_RISING_IT(__EXTI_LINE__) (EXTI->RPR1 = (__EXTI_LINE__)) + +/** + * @brief Check whether the specified EXTI line is falling edge asserted or not. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_FALLING_IT(__EXTI_LINE__) (EXTI->FPR1 & (__EXTI_LINE__)) + +/** + * @brief Clear the EXTI line falling pending bits. + * @param __EXTI_LINE__ specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_FALLING_IT(__EXTI_LINE__) (EXTI->FPR1 = (__EXTI_LINE__)) + +/** + * @brief Check whether the specified EXTI line is asserted or not. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (__HAL_GPIO_EXTI_GET_RISING_IT(__EXTI_LINE__) || \ + __HAL_GPIO_EXTI_GET_FALLING_IT(__EXTI_LINE__)) + +/** + * @brief Clear the EXTI's line pending bits. + * @param __EXTI_LINE__ specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) \ + do { \ + __HAL_GPIO_EXTI_CLEAR_RISING_IT(__EXTI_LINE__); \ + __HAL_GPIO_EXTI_CLEAR_FALLING_IT(__EXTI_LINE__); \ + } while(0) + + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER1 |= (__EXTI_LINE__)) + +/** + * @brief Check whether the specified EXTI line flag is set or not. + * @param __EXTI_LINE__ specifies the EXTI line flag to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) + +/** + * @brief Clear the EXTI line pending flags. + * @param __EXTI_LINE__ specifies the EXTI lines flags to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup GPIO_Private_Constants GPIO Private Constants + * @{ + */ +#define GPIO_MODE_Pos 0u +#define GPIO_MODE (0x3uL << GPIO_MODE_Pos) +#define MODE_INPUT (0x0uL << GPIO_MODE_Pos) +#define MODE_OUTPUT (0x1uL << GPIO_MODE_Pos) +#define MODE_AF (0x2uL << GPIO_MODE_Pos) +#define MODE_ANALOG (0x3uL << GPIO_MODE_Pos) +#define OUTPUT_TYPE_Pos 4u +#define OUTPUT_TYPE (0x1uL << OUTPUT_TYPE_Pos) +#define OUTPUT_PP (0x0uL << OUTPUT_TYPE_Pos) +#define OUTPUT_OD (0x1uL << OUTPUT_TYPE_Pos) +#define EXTI_MODE_Pos 16u +#define EXTI_MODE (0x3uL << EXTI_MODE_Pos) +#define EXTI_IT (0x1uL << EXTI_MODE_Pos) +#define EXTI_EVT (0x2uL << EXTI_MODE_Pos) +#define TRIGGER_MODE_Pos 20u +#define TRIGGER_MODE (0x7uL << TRIGGER_MODE_Pos) +#define TRIGGER_RISING (0x1uL << TRIGGER_MODE_Pos) +#define TRIGGER_FALLING (0x2uL << TRIGGER_MODE_Pos) +/** + * @} + */ + +/** @defgroup GPIO_Private_Macros GPIO Private Macros + * @{ + */ +#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) + +#define IS_GPIO_PIN(__PIN__) ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00u) &&\ + (((uint32_t)(__PIN__) & ~GPIO_PIN_MASK) == 0x00u)) + +#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\ + ((__MODE__) == GPIO_MODE_AF_PP) ||\ + ((__MODE__) == GPIO_MODE_AF_OD) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING) ||\ + ((__MODE__) == GPIO_MODE_IT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING) ||\ + ((__MODE__) == GPIO_MODE_EVT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_ANALOG)) + +#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_HIGH) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_VERY_HIGH)) + +#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\ + ((__PULL__) == GPIO_PULLUP) || \ + ((__PULL__) == GPIO_PULLDOWN)) +/** + * @} + */ + +/* Include GPIO HAL Extended module */ +#include "stm32g0xx_hal_gpio_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Functions GPIO Exported Functions + * @brief GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * @{ + */ + +/* Initialization and de-initialization functions *****************************/ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init); +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); +void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_Rising_Callback(uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_Falling_Callback(uint16_t GPIO_Pin); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_GPIO_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio_ex.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio_ex.h new file mode 100644 index 0000000..5ddf336 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio_ex.h @@ -0,0 +1,836 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_gpio_ex.h + * @author MCD Application Team + * @brief Header file of GPIO HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_GPIO_EX_H +#define STM32G0xx_HAL_GPIO_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIOEx GPIOEx + * @brief GPIO Extended HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants + * @{ + */ + +/** @defgroup GPIOEx_Alternate_function_selection GPIOEx Alternate function selection + * @{ + */ +#if defined (STM32G0C1xx) || defined (STM32G0B1xx) +/*------------------------- STM32G0C1xx / STM32G0B1xx ------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_CEC ((uint8_t)0x00) /*!< CEC Alternate Function mapping */ +#define GPIO_AF0_CRS ((uint8_t)0x00) /*!< CRS Alternate Function mapping */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_LPTIM1 ((uint8_t)0x00) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF0_TIM16 ((uint8_t)0x00) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< USART4 Alternate Function mapping */ +#define GPIO_AF0_UCPD1 ((uint8_t)0x00) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF0_UCPD2 ((uint8_t)0x00) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_CEC ((uint8_t)0x01) /*!< CEC Alternate Function mapping */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_LPTIM2 ((uint8_t)0x01) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF1_LPUART1 ((uint8_t)0x01) /*!< LPUART1 Alternate Function mapping */ +#define GPIO_AF1_LPUART2 ((uint8_t)0x01) /*!< LPUART2 Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF1_USART4 ((uint8_t)0x01) /*!< USART4 Alternate Function mapping */ +#define GPIO_AF1_UCPD1 ((uint8_t)0x01) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF1_UCPD2 ((uint8_t)0x01) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_LPTIM1 ((uint8_t)0x02) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF2_LPTIM2 ((uint8_t)0x02) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /*!< TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF2_USB ((uint8_t)0x02) /*!< USB Alternate Function mapping */ + + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_FDCAN1 ((uint8_t)0x03) /*!< FDCAN1 Alternate Function mapping */ +#define GPIO_AF3_FDCAN2 ((uint8_t)0x03) /*!< FDCAN2 Alternate Function mapping */ +#define GPIO_AF3_LPUART2 ((uint8_t)0x03) /*!< LPUART2 Alternate Function mapping */ +#define GPIO_AF3_USART5 ((uint8_t)0x03) /*!< USART5 Alternate Function mapping */ +#define GPIO_AF3_USART6 ((uint8_t)0x03) /*!< USART6 Alternate Function mapping */ +#define GPIO_AF3_MCO2 ((uint8_t)0x03) /*!< MCO2 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_CRS ((uint8_t)0x04) /*!< CRS Alternate Function mapping */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_SPI3 ((uint8_t)0x04) /*!< SPI3 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< USART4 Alternate Function mapping */ +#define GPIO_AF4_USART6 ((uint8_t)0x04) /*!< USART6 Alternate Function mapping */ +#define GPIO_AF4_UCPD1 ((uint8_t)0x04) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF4_UCPD2 ((uint8_t)0x04) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_LPTIM1 ((uint8_t)0x05) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF5_LPTIM2 ((uint8_t)0x05) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF5_USART3 ((uint8_t)0x05) /*!< USART3 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF6_I2C3 ((uint8_t)0x06) /*!< I2C3 Alternate Function mapping */ +#define GPIO_AF6_LPUART1 ((uint8_t)0x06) /*!< LPUART1 Alternate Function mapping */ +#define GPIO_AF6_UCPD1 ((uint8_t)0x06) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF6_UCPD2 ((uint8_t)0x06) /*!< UCPD2 Alternate Function mapping */ +#define GPIO_AF6_USB ((uint8_t)0x06) /*!< USB Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_COMP1 ((uint8_t)0x07) /*!< COMP1 Alternate Function mapping */ +#define GPIO_AF7_COMP2 ((uint8_t)0x07) /*!< COMP2 Alternate Function mapping */ +#define GPIO_AF7_COMP3 ((uint8_t)0x07) /*!< COMP3 Alternate Function mapping */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_I2C2 ((uint8_t)0x08) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF8_USART5 ((uint8_t)0x08) /*!< USART5 Alternate Function mapping */ +#define GPIO_AF8_USART6 ((uint8_t)0x08) /*!< USART5 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_I2C3 ((uint8_t)0x09) /*!< I2C3 Alternate Function mapping */ +#define GPIO_AF9_SPI3 ((uint8_t)0x09) /*!< SPI3 Alternate Function mapping */ +#define GPIO_AF9_TIM4 ((uint8_t)0x09) /*!< TIM4 Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_LPUART2 ((uint8_t)0x0A) /*!< LPUART2 Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0A) + +#endif /* STM32G0C1xx || STM32G0B1xx */ + +#if defined (STM32G0B0xx) +/*------------------------- STM32G0B0xx ------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_CRS ((uint8_t)0x00) /*!< CRS Alternate Function mapping */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF0_TIM16 ((uint8_t)0x00) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< USART4 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF1_USART4 ((uint8_t)0x01) /*!< USART4 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /*!< TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF2_USB ((uint8_t)0x02) /*!< USB Alternate Function mapping */ + + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_USART5 ((uint8_t)0x03) /*!< USART5 Alternate Function mapping */ +#define GPIO_AF3_USART6 ((uint8_t)0x03) /*!< USART6 Alternate Function mapping */ +#define GPIO_AF3_MCO2 ((uint8_t)0x03) /*!< MCO2 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_CRS ((uint8_t)0x04) /*!< CRS Alternate Function mapping */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_SPI3 ((uint8_t)0x04) /*!< SPI3 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< USART4 Alternate Function mapping */ +#define GPIO_AF4_USART6 ((uint8_t)0x04) /*!< USART6 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF5_USART3 ((uint8_t)0x05) /*!< USART3 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF6_I2C3 ((uint8_t)0x06) /*!< I2C3 Alternate Function mapping */ +#define GPIO_AF6_USB ((uint8_t)0x06) /*!< USB Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_I2C2 ((uint8_t)0x08) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF8_USART5 ((uint8_t)0x08) /*!< USART5 Alternate Function mapping */ +#define GPIO_AF8_USART6 ((uint8_t)0x08) /*!< USART5 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_I2C3 ((uint8_t)0x09) /*!< I2C3 Alternate Function mapping */ +#define GPIO_AF9_SPI3 ((uint8_t)0x09) /*!< SPI3 Alternate Function mapping */ +#define GPIO_AF9_TIM4 ((uint8_t)0x09) /*!< TIM4 Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x09) + +#endif /* STM32G0B0xx */ + + +#if defined (STM32G081xx) || defined (STM32G071xx) +/*------------------------- STM32G081xx / STM32G071xx ------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_CEC ((uint8_t)0x00) /*!< CEC Alternate Function mapping */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_LPTIM1 ((uint8_t)0x00) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF0_UCPD1 ((uint8_t)0x00) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF0_UCPD2 ((uint8_t)0x00) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_CEC ((uint8_t)0x01) /*!< CEC Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_LPUART1 ((uint8_t)0x01) /*!< LPUART1 Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF1_USART4 ((uint8_t)0x01) /*!< USART4 Alternate Function mapping */ +#define GPIO_AF1_UCPD1 ((uint8_t)0x01) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF1_UCPD2 ((uint8_t)0x01) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_LPTIM1 ((uint8_t)0x02) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF2_LPTIM2 ((uint8_t)0x02) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_UCPD1 ((uint8_t)0x03) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF3_UCPD2 ((uint8_t)0x03) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< USART4 Alternate Function mapping */ +#define GPIO_AF4_UCPD1 ((uint8_t)0x04) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF4_UCPD2 ((uint8_t)0x04) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_LPTIM1 ((uint8_t)0x05) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF5_LPTIM2 ((uint8_t)0x05) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF5_USART3 ((uint8_t)0x05) /*!< USART3 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF6_LPUART1 ((uint8_t)0x06) /*!< LPUART1 Alternate Function mapping */ +#define GPIO_AF6_UCPD1 ((uint8_t)0x06) /*!< UCPD1 Alternate Function mapping */ +#define GPIO_AF6_UCPD2 ((uint8_t)0x06) /*!< UCPD2 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_COMP1 ((uint8_t)0x07) /*!< COMP1 Alternate Function mapping */ +#define GPIO_AF7_COMP2 ((uint8_t)0x07) /*!< COMP2 Alternate Function mapping */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07) + +#endif /* STM32G081xx || STM32G071xx */ + +#if defined (STM32G070xx) +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< USART3 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF1_USART4 ((uint8_t)0x01) /*!< USART4 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< USART4 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ +#define GPIO_AF5_USART3 ((uint8_t)0x05) /*!< USART3 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07) + +#endif /* STM32G070xx */ + +#if defined (STM32G051xx) || defined (STM32G061xx) +/*------------------------- STM32G061xx / STM32G051xx ------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_LPUART1 ((uint8_t)0x01) /*!< LPUART1 Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_LPTIM1 ((uint8_t)0x05) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF5_LPTIM2 ((uint8_t)0x05) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF6_LPUART1 ((uint8_t)0x06) /*!< LPUART1 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_COMP1 ((uint8_t)0x07) /*!< COMP1 Alternate Function mapping */ +#define GPIO_AF7_COMP2 ((uint8_t)0x07) /*!< COMP2 Alternate Function mapping */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07) + +#endif /* STM32G051xx || STM32G061xx */ + +#if defined (STM32G050xx) +/*------------------------- STM32G050xx --------------------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07) + +#endif /* STM32G050xx */ + +#if defined (STM32G031xx) || defined (STM32G041xx) +/*------------------------- STM32G041xx / STM32G031xx ------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_LPUART1 ((uint8_t)0x01) /*!< LPUART1 Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_LPTIM1 ((uint8_t)0x05) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF5_LPTIM2 ((uint8_t)0x05) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF6_LPUART1 ((uint8_t)0x06) /*!< LPUART1 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07) + +#endif /* STM32G031xx || STM32G041xx */ + +#if defined (STM32G030xx) +/*------------------------- STM32G030xx --------------------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_SPI2 ((uint8_t)0x04) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF6_I2C2 ((uint8_t)0x06) /*!< I2C2 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07) + +#endif /* STM32G030xx */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Macros GPIOEx Exported Macros + * @{ + */ + +/** @defgroup GPIOEx_Get_Port_Index GPIOEx Get Port Index +* @{ + */ +#if defined(GPIOE) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL :\ + ((__GPIOx__) == (GPIOE))? 4uL : 5uL) +#else +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL : 5uL) +#endif /* GPIOE */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_GPIO_EX_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c.h new file mode 100644 index 0000000..cb78a18 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c.h @@ -0,0 +1,838 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_i2c.h + * @author MCD Application Team + * @brief Header file of I2C HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_I2C_H +#define STM32G0xx_HAL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2C + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I2C_Exported_Types I2C Exported Types + * @{ + */ + +/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition + * @brief I2C Configuration Structure definition + * @{ + */ +typedef struct +{ + uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value. + This parameter calculated by referring to I2C initialization section + in Reference manual */ + + uint32_t OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. + This parameter can be a value of @ref I2C_ADDRESSING_MODE */ + + uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. + This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */ + + uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected + This parameter can be a 7-bit address. */ + + uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing + mode is selected. + This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */ + + uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. + This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */ + + uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. + This parameter can be a value of @ref I2C_NOSTRETCH_MODE */ + +} I2C_InitTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_state_structure_definition HAL state structure definition + * @brief HAL State structure definition + * @note HAL I2C State value coding follow below described bitmap :\n + * b7-b6 Error information\n + * 00 : No Error\n + * 01 : Abort (Abort user request on going)\n + * 10 : Timeout\n + * 11 : Error\n + * b5 Peripheral initialization status\n + * 0 : Reset (peripheral not initialized)\n + * 1 : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n + * b4 (not used)\n + * x : Should be set to 0\n + * b3\n + * 0 : Ready or Busy (No Listen mode ongoing)\n + * 1 : Listen (peripheral in Address Listen Mode)\n + * b2 Intrinsic process state\n + * 0 : Ready\n + * 1 : Busy (peripheral busy with some configuration or internal operations)\n + * b1 Rx state\n + * 0 : Ready (no Rx operation ongoing)\n + * 1 : Busy (Rx operation ongoing)\n + * b0 Tx state\n + * 0 : Ready (no Tx operation ongoing)\n + * 1 : Busy (Tx operation ongoing) + * @{ + */ +typedef enum +{ + HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */ + HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */ + HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */ + HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */ + HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ + HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */ + HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission + process is ongoing */ + HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception + process is ongoing */ + HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ + +} HAL_I2C_StateTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_mode_structure_definition HAL mode structure definition + * @brief HAL Mode structure definition + * @note HAL I2C Mode value coding follow below described bitmap :\n + * b7 (not used)\n + * x : Should be set to 0\n + * b6\n + * 0 : None\n + * 1 : Memory (HAL I2C communication is in Memory Mode)\n + * b5\n + * 0 : None\n + * 1 : Slave (HAL I2C communication is in Slave Mode)\n + * b4\n + * 0 : None\n + * 1 : Master (HAL I2C communication is in Master Mode)\n + * b3-b2-b1-b0 (not used)\n + * xxxx : Should be set to 0000 + * @{ + */ +typedef enum +{ + HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */ + HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */ + HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */ + HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */ + +} HAL_I2C_ModeTypeDef; + +/** + * @} + */ + +/** @defgroup I2C_Error_Code_definition I2C Error Code definition + * @brief I2C Error Code definition + * @{ + */ +#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */ +#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */ +#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */ +#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */ +#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ +#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */ +#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define HAL_I2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +#define HAL_I2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ +/** + * @} + */ + +/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition + * @brief I2C handle Structure definition + * @{ + */ +typedef struct __I2C_HandleTypeDef +{ + I2C_TypeDef *Instance; /*!< I2C registers base address */ + + I2C_InitTypeDef Init; /*!< I2C communication parameters */ + + uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */ + + uint16_t XferSize; /*!< I2C transfer size */ + + __IO uint16_t XferCount; /*!< I2C transfer counter */ + + __IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can + be a value of @ref I2C_XFEROPTIONS */ + + __IO uint32_t PreviousState; /*!< I2C communication Previous state */ + + HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); + /*!< I2C transfer IRQ handler function pointer */ + + DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */ + + + HAL_LockTypeDef Lock; /*!< I2C locking object */ + + __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */ + + __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */ + + __IO uint32_t ErrorCode; /*!< I2C Error code */ + + __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */ + + __IO uint32_t Devaddress; /*!< I2C Target device address */ + + __IO uint32_t Memaddress; /*!< I2C Target memory address */ + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Master Tx Transfer completed callback */ + void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Master Rx Transfer completed callback */ + void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Slave Tx Transfer completed callback */ + void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Slave Rx Transfer completed callback */ + void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Listen Complete callback */ + void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Memory Tx Transfer completed callback */ + void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Memory Rx Transfer completed callback */ + void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Error callback */ + void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Abort callback */ + + void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); + /*!< I2C Slave Address Match callback */ + + void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Msp Init callback */ + void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Msp DeInit callback */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} I2C_HandleTypeDef; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief HAL I2C Callback ID enumeration definition + */ +typedef enum +{ + HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */ + HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */ + HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */ + HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */ + HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */ + HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */ + HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */ + HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */ + HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */ + + HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */ + HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */ + +} HAL_I2C_CallbackIDTypeDef; + +/** + * @brief HAL I2C Callback pointer definition + */ +typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); +/*!< pointer to an I2C callback function */ +typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, + uint16_t AddrMatchCode); +/*!< pointer to an I2C Address Match callback function */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options + * @{ + */ +#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE) +#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE) + +/* List of XferOptions in usage of : + * 1- Restart condition in all use cases (direction change or not) + */ +#define I2C_OTHER_FRAME (0x000000AAU) +#define I2C_OTHER_AND_LAST_FRAME (0x0000AA00U) +/** + * @} + */ + +/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode + * @{ + */ +#define I2C_ADDRESSINGMODE_7BIT (0x00000001U) +#define I2C_ADDRESSINGMODE_10BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode + * @{ + */ +#define I2C_DUALADDRESS_DISABLE (0x00000000U) +#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN +/** + * @} + */ + +/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks + * @{ + */ +#define I2C_OA2_NOMASK ((uint8_t)0x00U) +#define I2C_OA2_MASK01 ((uint8_t)0x01U) +#define I2C_OA2_MASK02 ((uint8_t)0x02U) +#define I2C_OA2_MASK03 ((uint8_t)0x03U) +#define I2C_OA2_MASK04 ((uint8_t)0x04U) +#define I2C_OA2_MASK05 ((uint8_t)0x05U) +#define I2C_OA2_MASK06 ((uint8_t)0x06U) +#define I2C_OA2_MASK07 ((uint8_t)0x07U) +/** + * @} + */ + +/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode + * @{ + */ +#define I2C_GENERALCALL_DISABLE (0x00000000U) +#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN +/** + * @} + */ + +/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode + * @{ + */ +#define I2C_NOSTRETCH_DISABLE (0x00000000U) +#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH +/** + * @} + */ + +/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size + * @{ + */ +#define I2C_MEMADD_SIZE_8BIT (0x00000001U) +#define I2C_MEMADD_SIZE_16BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View + * @{ + */ +#define I2C_DIRECTION_TRANSMIT (0x00000000U) +#define I2C_DIRECTION_RECEIVE (0x00000001U) +/** + * @} + */ + +/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode + * @{ + */ +#define I2C_RELOAD_MODE I2C_CR2_RELOAD +#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND +#define I2C_SOFTEND_MODE (0x00000000U) +/** + * @} + */ + +/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode + * @{ + */ +#define I2C_NO_STARTSTOP (0x00000000U) +#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/** + * @} + */ + +/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition + * @brief I2C Interrupt definition + * Elements values convention: 0xXXXXXXXX + * - XXXXXXXX : Interrupt control mask + * @{ + */ +#define I2C_IT_ERRI I2C_CR1_ERRIE +#define I2C_IT_TCI I2C_CR1_TCIE +#define I2C_IT_STOPI I2C_CR1_STOPIE +#define I2C_IT_NACKI I2C_CR1_NACKIE +#define I2C_IT_ADDRI I2C_CR1_ADDRIE +#define I2C_IT_RXI I2C_CR1_RXIE +#define I2C_IT_TXI I2C_CR1_TXIE +/** + * @} + */ + +/** @defgroup I2C_Flag_definition I2C Flag definition + * @{ + */ +#define I2C_FLAG_TXE I2C_ISR_TXE +#define I2C_FLAG_TXIS I2C_ISR_TXIS +#define I2C_FLAG_RXNE I2C_ISR_RXNE +#define I2C_FLAG_ADDR I2C_ISR_ADDR +#define I2C_FLAG_AF I2C_ISR_NACKF +#define I2C_FLAG_STOPF I2C_ISR_STOPF +#define I2C_FLAG_TC I2C_ISR_TC +#define I2C_FLAG_TCR I2C_ISR_TCR +#define I2C_FLAG_BERR I2C_ISR_BERR +#define I2C_FLAG_ARLO I2C_ISR_ARLO +#define I2C_FLAG_OVR I2C_ISR_OVR +#define I2C_FLAG_PECERR I2C_ISR_PECERR +#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT +#define I2C_FLAG_ALERT I2C_ISR_ALERT +#define I2C_FLAG_BUSY I2C_ISR_BUSY +#define I2C_FLAG_DIR I2C_ISR_DIR +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @brief Reset I2C handle state. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_I2C_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET) +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** @brief Enable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) + +/** @brief Disable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) + +/** @brief Check whether the specified I2C interrupt source is enabled or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the I2C interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & \ + (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified I2C flag is set or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_TXIS Transmit interrupt status + * @arg @ref I2C_FLAG_RXNE Receive data register not empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_TC Transfer complete (master mode) + * @arg @ref I2C_FLAG_TCR Transfer complete reload + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * @arg @ref I2C_FLAG_BUSY Bus busy + * @arg @ref I2C_FLAG_DIR Transfer direction (slave mode) + * + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define I2C_FLAG_MASK (0x0001FFFFU) +#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & \ + (__FLAG__)) == (__FLAG__)) ? SET : RESET) + +/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * + * @retval None + */ +#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? \ + ((__HANDLE__)->Instance->ISR |= (__FLAG__)) : \ + ((__HANDLE__)->Instance->ICR = (__FLAG__))) + +/** @brief Enable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Disable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK)) +/** + * @} + */ + +/* Include I2C HAL Extended module */ +#include "stm32g0xx_hal_i2c_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2C_Exported_Functions + * @{ + */ + +/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +/* Initialization and de-initialization functions******************************/ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, + pI2C_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +/* IO operation functions ****************************************************/ +/******* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout); + +/******* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress); + +/******* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +/** + * @} + */ + +/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ +/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); +void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @{ + */ +/* Peripheral State, Mode and Error functions *********************************/ +HAL_I2C_StateTypeDef HAL_I2C_GetState(const I2C_HandleTypeDef *hi2c); +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(const I2C_HandleTypeDef *hi2c); +uint32_t HAL_I2C_GetError(const I2C_HandleTypeDef *hi2c); + +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Constants I2C Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2C_Private_Macro I2C Private Macros + * @{ + */ + +#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \ + ((MODE) == I2C_ADDRESSINGMODE_10BIT)) + +#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \ + ((ADDRESS) == I2C_DUALADDRESS_ENABLE)) + +#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \ + ((MASK) == I2C_OA2_MASK01) || \ + ((MASK) == I2C_OA2_MASK02) || \ + ((MASK) == I2C_OA2_MASK03) || \ + ((MASK) == I2C_OA2_MASK04) || \ + ((MASK) == I2C_OA2_MASK05) || \ + ((MASK) == I2C_OA2_MASK06) || \ + ((MASK) == I2C_OA2_MASK07)) + +#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \ + ((CALL) == I2C_GENERALCALL_ENABLE)) + +#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \ + ((STRETCH) == I2C_NOSTRETCH_ENABLE)) + +#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \ + ((SIZE) == I2C_MEMADD_SIZE_16BIT)) + +#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \ + ((MODE) == I2C_AUTOEND_MODE) || \ + ((MODE) == I2C_SOFTEND_MODE)) + +#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \ + ((REQUEST) == I2C_GENERATE_START_READ) || \ + ((REQUEST) == I2C_GENERATE_START_WRITE) || \ + ((REQUEST) == I2C_NO_STARTSTOP)) + +#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \ + ((REQUEST) == I2C_NEXT_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \ + IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)) + +#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \ + ((REQUEST) == I2C_OTHER_AND_LAST_FRAME)) + +#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \ + (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | \ + I2C_CR2_NBYTES | I2C_CR2_RELOAD | \ + I2C_CR2_RD_WRN))) + +#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) \ + >> 16U)) +#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) \ + >> 16U)) +#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND) +#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1)) +#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2)) + +#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) +#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) + +#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & \ + (uint16_t)(0xFF00U))) >> 8U))) +#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU)))) + +#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ + (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & \ + (~I2C_CR2_RD_WRN)) : \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ + (I2C_CR2_ADD10) | (I2C_CR2_START) | \ + (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN))) + +#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == \ + ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) +#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions are defined in stm32g0xx_hal_i2c.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32G0xx_HAL_I2C_H */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c_ex.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c_ex.h new file mode 100644 index 0000000..8db972b --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c_ex.h @@ -0,0 +1,177 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_i2c_ex.h + * @author MCD Application Team + * @brief Header file of I2C HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_I2C_EX_H +#define STM32G0xx_HAL_I2C_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2CEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants + * @{ + */ + +/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter + * @{ + */ +#define I2C_ANALOGFILTER_ENABLE 0x00000000U +#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF +/** + * @} + */ + +/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus + * @{ + */ +#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */ +#define I2C_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_PA9_FMP /*!< Enable Fast Mode Plus on PA9 */ +#define I2C_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_PA10_FMP /*!< Enable Fast Mode Plus on PA10 */ +#define I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */ +#define I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */ +#define I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */ +#define I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */ +#define I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */ +#define I2C_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */ +#if defined(SYSCFG_CFGR1_I2C3_FMP) +#define I2C_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */ +#else +#define I2C_FASTMODEPLUS_I2C3 (uint32_t)(0x00000400U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C3 not supported */ +#endif /* SYSCFG_CFGR1_I2C3_FMP */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2CEx_Exported_Macros I2C Extended Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @addtogroup I2CEx_Exported_Functions_Group1 Filter Mode Functions + * @{ + */ +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter); +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter); +/** + * @} + */ + +/** @addtogroup I2CEx_Exported_Functions_Group2 WakeUp Mode Functions + * @{ + */ +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @{ + */ +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus); +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros + * @{ + */ +#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \ + ((FILTER) == I2C_ANALOGFILTER_DISABLE)) + +#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) + +#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FMP_NOT_SUPPORTED) != I2C_FMP_NOT_SUPPORTED) && \ + ((((__CONFIG__) & (I2C_FASTMODEPLUS_PA9)) == I2C_FASTMODEPLUS_PA9) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PA10)) == I2C_FASTMODEPLUS_PA10) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB6)) == I2C_FASTMODEPLUS_PB6) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB7)) == I2C_FASTMODEPLUS_PB7) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB8)) == I2C_FASTMODEPLUS_PB8) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB9)) == I2C_FASTMODEPLUS_PB9) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C1)) == I2C_FASTMODEPLUS_I2C1) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C2)) == I2C_FASTMODEPLUS_I2C2) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C3)) == I2C_FASTMODEPLUS_I2C3))) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions + * @{ + */ +/* Private functions are defined in stm32g0xx_hal_i2c_ex.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_I2C_EX_H */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd.h new file mode 100644 index 0000000..78543fd --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd.h @@ -0,0 +1,629 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pcd.h + * @author MCD Application Team + * @brief Header file of PCD HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_PCD_H +#define STM32G0xx_HAL_PCD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_usb.h" + +#if defined (USB_DRD_FS) + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup PCD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PCD_Exported_Types PCD Exported Types + * @{ + */ + +/** + * @brief PCD State structure definition + */ +typedef enum +{ + HAL_PCD_STATE_RESET = 0x00, + HAL_PCD_STATE_READY = 0x01, + HAL_PCD_STATE_ERROR = 0x02, + HAL_PCD_STATE_BUSY = 0x03, + HAL_PCD_STATE_TIMEOUT = 0x04 +} PCD_StateTypeDef; + +/* Device LPM suspend state */ +typedef enum +{ + LPM_L0 = 0x00, /* on */ + LPM_L1 = 0x01, /* LPM L1 sleep */ + LPM_L2 = 0x02, /* suspend */ + LPM_L3 = 0x03, /* off */ +} PCD_LPM_StateTypeDef; + +typedef enum +{ + PCD_LPM_L0_ACTIVE = 0x00, /* on */ + PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */ +} PCD_LPM_MsgTypeDef; + +typedef enum +{ + PCD_BCD_ERROR = 0xFF, + PCD_BCD_CONTACT_DETECTION = 0xFE, + PCD_BCD_STD_DOWNSTREAM_PORT = 0xFD, + PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFC, + PCD_BCD_DEDICATED_CHARGING_PORT = 0xFB, + PCD_BCD_DISCOVERY_COMPLETED = 0x00, + +} PCD_BCD_MsgTypeDef; + +typedef USB_DRD_TypeDef PCD_TypeDef; +typedef USB_DRD_CfgTypeDef PCD_InitTypeDef; +typedef USB_DRD_EPTypeDef PCD_EPTypeDef; + +/** + * @brief PCD Handle Structure definition + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +typedef struct __PCD_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + PCD_TypeDef *Instance; /*!< Register base address */ + PCD_InitTypeDef Init; /*!< PCD required parameters */ + __IO uint8_t USB_Address; /*!< USB Address */ + PCD_EPTypeDef IN_ep[8]; /*!< IN endpoint parameters */ + PCD_EPTypeDef OUT_ep[8]; /*!< OUT endpoint parameters */ + HAL_LockTypeDef Lock; /*!< PCD peripheral status */ + __IO PCD_StateTypeDef State; /*!< PCD communication state */ + __IO uint32_t ErrorCode; /*!< PCD Error code */ + uint32_t Setup[12]; /*!< Setup packet buffer */ + PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */ + uint32_t BESL; + + + uint32_t lpm_active; /*!< Enable or disable the Link Power Management . + This parameter can be set to ENABLE or DISABLE */ + + uint32_t battery_charging_active; /*!< Enable or disable Battery charging. + This parameter can be set to ENABLE or DISABLE */ + void *pData; /*!< Pointer to upper stack Handler */ + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD SOF callback */ + void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Setup Stage callback */ + void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Reset callback */ + void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Suspend callback */ + void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Resume callback */ + void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Connect callback */ + void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Disconnect callback */ + + void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data OUT Stage callback */ + void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data IN Stage callback */ + void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO OUT Incomplete callback */ + void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO IN Incomplete callback */ + void (* BCDCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< USB OTG PCD BCD callback */ + void (* LPMCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< USB OTG PCD LPM callback */ + + void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp Init callback */ + void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp DeInit callback */ +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +} PCD_HandleTypeDef; + +/** + * @} + */ + +/* Include PCD HAL Extended module */ +#include "stm32g0xx_hal_pcd_ex.h" + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PCD_Exported_Constants PCD Exported Constants + * @{ + */ + +/** @defgroup PCD_Speed PCD Speed + * @{ + */ +#define PCD_SPEED_FULL USBD_FS_SPEED +/** + * @} + */ + +/** @defgroup PCD_PHY_Module PCD PHY Module + * @{ + */ +#define PCD_PHY_ULPI 1U +#define PCD_PHY_EMBEDDED 2U +#define PCD_PHY_UTMI 3U +/** + * @} + */ + +/** @defgroup PCD_Error_Code_definition PCD Error Code definition + * @brief PCD Error Code definition + * @{ + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +#define HAL_PCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */ +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup PCD_Exported_Macros PCD Exported Macros + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ +#define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance) +#define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance) + +#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) \ + ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) + + +#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR)\ + &= (uint16_t)(~(__INTERRUPT__))) + +#define __HAL_USB_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR2 |= USB_WAKEUP_EXTI_LINE +#define __HAL_USB_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR2 &= ~(USB_WAKEUP_EXTI_LINE) + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCD_Exported_Functions PCD Exported Functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +/** @defgroup HAL_PCD_Callback_ID_enumeration_definition HAL USB OTG PCD Callback ID enumeration definition + * @brief HAL USB OTG PCD Callback ID enumeration definition + * @{ + */ +typedef enum +{ + HAL_PCD_SOF_CB_ID = 0x01, /*!< USB PCD SOF callback ID */ + HAL_PCD_SETUPSTAGE_CB_ID = 0x02, /*!< USB PCD Setup Stage callback ID */ + HAL_PCD_RESET_CB_ID = 0x03, /*!< USB PCD Reset callback ID */ + HAL_PCD_SUSPEND_CB_ID = 0x04, /*!< USB PCD Suspend callback ID */ + HAL_PCD_RESUME_CB_ID = 0x05, /*!< USB PCD Resume callback ID */ + HAL_PCD_CONNECT_CB_ID = 0x06, /*!< USB PCD Connect callback ID */ + HAL_PCD_DISCONNECT_CB_ID = 0x07, /*!< USB PCD Disconnect callback ID */ + + HAL_PCD_MSPINIT_CB_ID = 0x08, /*!< USB PCD MspInit callback ID */ + HAL_PCD_MSPDEINIT_CB_ID = 0x09 /*!< USB PCD MspDeInit callback ID */ + +} HAL_PCD_CallbackIDTypeDef; +/** + * @} + */ + +/** @defgroup HAL_PCD_Callback_pointer_definition HAL USB OTG PCD Callback pointer definition + * @brief HAL USB OTG PCD Callback pointer definition + * @{ + */ + +typedef void (*pPCD_CallbackTypeDef)(PCD_HandleTypeDef *hpcd); /*!< pointer to a common USB OTG PCD callback function */ +typedef void (*pPCD_DataOutStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data OUT Stage callback */ +typedef void (*pPCD_DataInStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data IN Stage callback */ +typedef void (*pPCD_IsoOutIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO OUT Incomplete callback */ +typedef void (*pPCD_IsoInIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO IN Incomplete callback */ +typedef void (*pPCD_LpmCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< pointer to USB OTG PCD LPM callback */ +typedef void (*pPCD_BcdCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< pointer to USB OTG PCD BCD callback */ + +/** + * @} + */ + +HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID, + pPCD_CallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataOutStageCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataInStageCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoOutIncpltCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoInIncpltCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* I/O operation functions ***************************************************/ +/* Non-Blocking mode: Interrupt */ +/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd); +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd); + +void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd); + +void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +/** + * @} + */ + +/* Peripheral Control functions **********************************************/ +/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address); +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type); +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Abort(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); +uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef const *hpcd, uint8_t ep_addr); +/** + * @} + */ + +/* Peripheral State functions ************************************************/ +/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions + * @{ + */ +PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef const *hpcd); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup PCD_Private_Constants PCD Private Constants + * @{ + */ +/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt + * @{ + */ + + +#define USB_WAKEUP_EXTI_LINE (0x1U << 4) /*!< USB FS EXTI Line WakeUp Interrupt */ + + +/** + * @} + */ + +/** @defgroup PCD_EP0_MPS PCD EP0 MPS + * @{ + */ +#define PCD_EP0MPS_64 EP_MPS_64 +#define PCD_EP0MPS_32 EP_MPS_32 +#define PCD_EP0MPS_16 EP_MPS_16 +#define PCD_EP0MPS_08 EP_MPS_8 +/** + * @} + */ + +/** @defgroup PCD_ENDP PCD ENDP + * @{ + */ +#define PCD_ENDP0 0U +#define PCD_ENDP1 1U +#define PCD_ENDP2 2U +#define PCD_ENDP3 3U +#define PCD_ENDP4 4U +#define PCD_ENDP5 5U +#define PCD_ENDP6 6U +#define PCD_ENDP7 7U +/** + * @} + */ + +/** @defgroup PCD_ENDP_Kind PCD Endpoint Kind + * @{ + */ +#define PCD_SNG_BUF 0U +#define PCD_DBL_BUF 1U +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PCD_Private_Macros PCD Private Macros + * @{ + */ + +/* PMA RX counter */ +#ifndef PCD_RX_PMA_CNT +#define PCD_RX_PMA_CNT 10U +#endif /* PCD_RX_PMA_CNT */ + +/* SetENDPOINT */ +#define PCD_SET_ENDPOINT USB_DRD_SET_CHEP + +/* GetENDPOINT Register value*/ +#define PCD_GET_ENDPOINT USB_DRD_GET_CHEP + + +/** + * @brief free buffer used from the application realizing it to the line + * toggles bit SW_BUF in the double buffered endpoint register + * @param USBx USB device. + * @param bEpNum, bDir + * @retval None + */ +#define PCD_FREE_USER_BUFFER USB_DRD_FREE_USER_BUFFER + +/** + * @brief sets the status for tx transfer (bits STAT_TX[1:0]). + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wState new state + * @retval None + */ +#define PCD_SET_EP_TX_STATUS USB_DRD_SET_CHEP_TX_STATUS + +/** + * @brief sets the status for rx transfer (bits STAT_TX[1:0]) + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wState new state + * @retval None + */ +#define PCD_SET_EP_RX_STATUS USB_DRD_SET_CHEP_RX_STATUS + +/** + * @brief Sets/clears directly EP_KIND bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_SET_EP_KIND USB_DRD_SET_CHEP_KIND +#define PCD_CLEAR_EP_KIND USB_DRD_CLEAR_CHEP_KIND +#define PCD_SET_BULK_EP_DBUF PCD_SET_EP_KIND +#define PCD_CLEAR_BULK_EP_DBUF PCD_CLEAR_EP_KIND + + +/** + * @brief Clears bit CTR_RX / CTR_TX in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_CLEAR_RX_EP_CTR USB_DRD_CLEAR_RX_CHEP_CTR +#define PCD_CLEAR_TX_EP_CTR USB_DRD_CLEAR_TX_CHEP_CTR +/** + * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_RX_DTOG USB_DRD_RX_DTOG +#define PCD_TX_DTOG USB_DRD_TX_DTOG +/** + * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval None + */ +#define PCD_CLEAR_RX_DTOG USB_DRD_CLEAR_RX_DTOG +#define PCD_CLEAR_TX_DTOG USB_DRD_CLEAR_TX_DTOG + +/** + * @brief Sets address in an endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param bAddr Address. + * @retval None + */ +#define PCD_SET_EP_ADDRESS USB_DRD_SET_CHEP_ADDRESS + +/** + * @brief sets address of the tx/rx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wAddr address to be set (must be word aligned). + * @retval None + */ +#define PCD_SET_EP_TX_ADDRESS USB_DRD_SET_CHEP_TX_ADDRESS +#define PCD_SET_EP_RX_ADDRESS USB_DRD_SET_CHEP_RX_ADDRESS + +/** + * @brief sets counter for the tx/rx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wCount Counter value. + * @retval None + */ +#define PCD_SET_EP_TX_CNT USB_DRD_SET_CHEP_TX_CNT +#define PCD_SET_EP_RX_CNT USB_DRD_SET_CHEP_RX_CNT + +/** + * @brief gets counter of the tx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @retval Counter value + */ +#define PCD_GET_EP_TX_CNT USB_DRD_GET_CHEP_TX_CNT + +/** + * @brief gets counter of the rx buffer. + * @param Instance USB peripheral instance register address. + * @param bEpNum channel Number. + * @retval Counter value + */ +__STATIC_INLINE uint16_t PCD_GET_EP_RX_CNT(const PCD_TypeDef *Instance, uint16_t bEpNum) +{ + UNUSED(Instance); + __IO uint32_t count = PCD_RX_PMA_CNT; + + /* WA: few cycles for RX PMA descriptor to update */ + while (count > 0U) + { + count--; + } + + return (uint16_t)USB_DRD_GET_CHEP_RX_CNT((Instance), (bEpNum)); +} + +/** + * @brief Sets addresses in a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param wBuf0Addr: buffer 0 address. + * @param wBuf1Addr = buffer 1 address. + * @retval None + */ +#define PCD_SET_EP_DBUF_ADDR USB_DRD_SET_CHEP_DBUF_ADDR + +/** + * @brief Gets buffer 0/1 address of a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpNum Endpoint Number. + * @param bDir endpoint dir EP_DBUF_OUT = OUT + * EP_DBUF_IN = IN + * @param wCount: Counter value + * @retval None + */ +#define PCD_SET_EP_DBUF0_CNT USB_DRD_SET_CHEP_DBUF0_CNT +#define PCD_SET_EP_DBUF1_CNT USB_DRD_SET_CHEP_DBUF1_CNT +#define PCD_SET_EP_DBUF_CNT USB_DRD_SET_CHEP_DBUF_CNT + +/** + * @brief gets counter of the rx buffer0. + * @param Instance USB peripheral instance register address. + * @param bEpNum channel Number. + * @retval Counter value + */ +__STATIC_INLINE uint16_t PCD_GET_EP_DBUF0_CNT(const PCD_TypeDef *Instance, uint16_t bEpNum) +{ + UNUSED(Instance); + __IO uint32_t count = PCD_RX_PMA_CNT; + + /* WA: few cycles for RX PMA descriptor to update */ + while (count > 0U) + { + count--; + } + + return (uint16_t)USB_DRD_GET_CHEP_DBUF0_CNT((Instance), (bEpNum)); +} + +/** + * @brief gets counter of the rx buffer1. + * @param Instance USB peripheral instance register address. + * @param bEpNum channel Number. + * @retval Counter value + */ +__STATIC_INLINE uint16_t PCD_GET_EP_DBUF1_CNT(const PCD_TypeDef *Instance, uint16_t bEpNum) +{ + UNUSED(Instance); + __IO uint32_t count = PCD_RX_PMA_CNT; + + /* WA: few cycles for RX PMA descriptor to update */ + while (count > 0U) + { + count--; + } + + return (uint16_t)USB_DRD_GET_CHEP_DBUF1_CNT((Instance), (bEpNum)); +} + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_DRD_FS) */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_PCD_H */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd_ex.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd_ex.h new file mode 100644 index 0000000..4e3ca49 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pcd_ex.h @@ -0,0 +1,88 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pcd_ex.h + * @author MCD Application Team + * @brief Header file of PCD HAL Extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_PCD_EX_H +#define STM32G0xx_HAL_PCD_EX_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +#if defined (USB_DRD_FS) +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup PCDEx + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions + * @{ + */ +/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions + * @{ + */ + + + +HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, uint16_t ep_addr, + uint16_t ep_kind, uint32_t pmaadress); + + +HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd); + + +HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd); +void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd); + +void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); +void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_DRD_FS) */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + + +#endif /* STM32G0xx_HAL_PCD_EX_H */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr.h new file mode 100644 index 0000000..2defd85 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr.h @@ -0,0 +1,325 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pwr.h + * @author MCD Application Team + * @brief Header file of PWR HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_PWR_H +#define STM32G0xx_HAL_PWR_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup PWR PWR + * @brief PWR HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PWR_Exported_Types PWR Exported Types + * @{ + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWR_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_WakeUp_Pins PWR WakeUp pins + * @{ + */ +#define PWR_WAKEUP_PIN1 PWR_CR3_EWUP1 /*!< Wakeup pin 1 (with high level detection) */ +#define PWR_WAKEUP_PIN2 PWR_CR3_EWUP2 /*!< Wakeup pin 2 (with high level detection) */ +#if defined(PWR_CR3_EWUP3) +#define PWR_WAKEUP_PIN3 PWR_CR3_EWUP3 /*!< Wakeup pin 3 (with high level detection) */ +#endif /* PWR_CR3_EWUP3 */ +#define PWR_WAKEUP_PIN4 PWR_CR3_EWUP4 /*!< Wakeup pin 4 (with high level detection) */ +#if defined(PWR_CR3_EWUP5) +#define PWR_WAKEUP_PIN5 PWR_CR3_EWUP5 /*!< Wakeup pin 5 (with high level detection) */ +#endif /* PWR_CR3_EWUP5 */ +#define PWR_WAKEUP_PIN6 PWR_CR3_EWUP6 /*!< Wakeup pin 6 (with high level detection) */ +#define PWR_WAKEUP_PIN1_HIGH PWR_CR3_EWUP1 /*!< Wakeup pin 1 (with high level detection) */ +#define PWR_WAKEUP_PIN2_HIGH PWR_CR3_EWUP2 /*!< Wakeup pin 2 (with high level detection) */ +#if defined(PWR_CR3_EWUP3) +#define PWR_WAKEUP_PIN3_HIGH PWR_CR3_EWUP3 /*!< Wakeup pin 3 (with high level detection) */ +#endif /* PWR_CR3_EWUP3 */ +#define PWR_WAKEUP_PIN4_HIGH PWR_CR3_EWUP4 /*!< Wakeup pin 4 (with high level detection) */ +#if defined(PWR_CR3_EWUP5) +#define PWR_WAKEUP_PIN5_HIGH PWR_CR3_EWUP5 /*!< Wakeup pin 5 (with high level detection) */ +#endif /* PWR_CR3_EWUP5*/ +#define PWR_WAKEUP_PIN6_HIGH PWR_CR3_EWUP6 /*!< Wakeup pin 6 (with high level detection) */ +#define PWR_WAKEUP_PIN1_LOW ((PWR_CR4_WP1 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP1) /*!< Wakeup pin 1 (with low level detection) */ +#define PWR_WAKEUP_PIN2_LOW ((PWR_CR4_WP2 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP2) /*!< Wakeup pin 2 (with low level detection) */ +#if defined(PWR_CR3_EWUP3) +#define PWR_WAKEUP_PIN3_LOW ((PWR_CR4_WP3 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP3) /*!< Wakeup pin 3 (with low level detection) */ +#endif /* PWR_CR3_EWUP3 */ +#define PWR_WAKEUP_PIN4_LOW ((PWR_CR4_WP4 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP4) /*!< Wakeup pin 4 (with low level detection) */ +#if defined(PWR_CR3_EWUP5) +#define PWR_WAKEUP_PIN5_LOW ((PWR_CR4_WP5 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP5) /*!< Wakeup pin 5 (with low level detection) */ +#endif /* PWR_CR3_EWUP5 */ +#define PWR_WAKEUP_PIN6_LOW ((PWR_CR4_WP6 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP6) /*!< Wakeup pin 6 (with low level detection) */ +/** + * @} + */ + +/** @defgroup PWR_Low_Power_Mode_Selection PWR Low Power Mode Selection + * @{ + */ +#define PWR_LOWPOWERMODE_STOP0 (0x00000000u) /*!< Stop 0: stop mode with main regulator */ +#define PWR_LOWPOWERMODE_STOP1 (PWR_CR1_LPMS_0) /*!< Stop 1: stop mode with low power regulator */ +#define PWR_LOWPOWERMODE_STANDBY (PWR_CR1_LPMS_0 | PWR_CR1_LPMS_1) /*!< Standby mode */ +#if defined(PWR_SHDW_SUPPORT) +#define PWR_LOWPOWERMODE_SHUTDOWN (PWR_CR1_LPMS_2) /*!< Shutdown mode */ +#endif /* PWR_SHDW_SUPPORT */ +/** + * @} + */ + +/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR regulator mode + * @{ + */ +#define PWR_MAINREGULATOR_ON (0x00000000u) /*!< Regulator in main mode */ +#define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPR /*!< Regulator in low-power mode */ +/** + * @} + */ + +/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry + * @{ + */ +#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01u) /*!< Wait For Interruption instruction to enter Sleep mode */ +#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02u) /*!< Wait For Event instruction to enter Sleep mode */ +/** + * @} + */ + +/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry + * @{ + */ +#define PWR_STOPENTRY_WFI ((uint8_t)0x01u) /*!< Wait For Interruption instruction to enter Stop mode */ +#define PWR_STOPENTRY_WFE ((uint8_t)0x02u) /*!< Wait For Event instruction to enter Stop mode */ +/** + * @} + */ + +/** @defgroup PWR_Flag PWR Status Flags + * @brief Elements values convention: 0000 00XX 000Y YYYYb + * - Y YYYY : Flag position in the XX register (5 bits) + * - XX : Status register (2 bits) + * - 01: SR1 register + * - 10: SR2 register + * The only exception is PWR_FLAG_WU, encompassing all + * wake-up flags and set to PWR_SR1_WUF. + * @{ + */ +#define PWR_FLAG_WUF1 (0x00010000u | PWR_SR1_WUF1) /*!< Wakeup event on wakeup pin 1 */ +#define PWR_FLAG_WUF2 (0x00010000u | PWR_SR1_WUF2) /*!< Wakeup event on wakeup pin 2 */ +#if defined(PWR_CR3_EWUP3) +#define PWR_FLAG_WUF3 (0x00010000u | PWR_SR1_WUF3) /*!< Wakeup event on wakeup pin 3 */ +#endif /* PWR_CR3_EWUP3 */ +#define PWR_FLAG_WUF4 (0x00010000u | PWR_SR1_WUF4) /*!< Wakeup event on wakeup pin 4 */ +#if defined(PWR_CR3_EWUP5) +#define PWR_FLAG_WUF5 (0x00010000u | PWR_SR1_WUF5) /*!< Wakeup event on wakeup pin 5 */ +#endif /* PWR_CR3_EWUP5 */ +#define PWR_FLAG_WUF6 (0x00010000u | PWR_SR1_WUF6) /*!< Wakeup event on wakeup pin 6 */ +#define PWR_FLAG_WUF (0x00010000u | PWR_SR1_WUF) /*!< Wakeup event on all wakeup pin */ +#define PWR_FLAG_SB (0x00010000u | PWR_SR1_SBF) /*!< Standby flag */ +#define PWR_FLAG_WUFI (0x00010000u | PWR_SR1_WUFI) /*!< Wakeup on internal wakeup line */ +#define PWR_FLAG_FLASH_READY (0x00020000u | PWR_SR2_FLASH_RDY) /*!< Flash ready */ +#define PWR_FLAG_REGLPS (0x00020000u | PWR_SR2_REGLPS) /*!< Regulator Low Power started */ +#define PWR_FLAG_REGLPF (0x00020000u | PWR_SR2_REGLPF) /*!< Regulator Low Power flag */ +#if defined(PWR_PVD_SUPPORT) +#define PWR_FLAG_PVDO (0x00020000u | PWR_SR2_PVDO) /*!< Power Voltage Detector output */ +#endif /* PWR_PVD_SUPPORT */ +#if defined(PWR_PVM_SUPPORT) +#define PWR_FLAG_PVMO_USB (0x00020000u | PWR_SR2_PVMO_USB) /*!< Power Voltage Monitoring output */ +#endif /* PWR_PVM_SUPPORT */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup PWR_Exported_Macros PWR Exported Macros + * @{ + */ +/** @brief Check whether or not a specific PWR flag is set. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one a combination of following values: + * @arg PWR_FLAG_WUF1: Wake Up Flag 1. Indicates that a wakeup event + * was received from the WKUP pin 1. + * @arg PWR_FLAG_WUF2: Wake Up Flag 2. Indicates that a wakeup event + * was received from the WKUP pin 2. + * @arg PWR_FLAG_WUF3: Wake Up Flag 3. Indicates that a wakeup event + * was received from the WKUP pin 3. (*) + * @arg PWR_FLAG_WUF4: Wake Up Flag 4. Indicates that a wakeup event + * was received from the WKUP pin 4. + * @arg PWR_FLAG_WUF5: Wake Up Flag 5. Indicates that a wakeup event + * was received from the WKUP pin 5. (*) + * @arg PWR_FLAG_WUF6: Wake Up Flag 6. Indicates that a wakeup event + * was received from the WKUP pin 6. + * @arg PWR_FLAG_SB: StandBy Flag. Indicates that the system + * entered StandBy mode. + * @arg PWR_FLAG_WUFI: Wake-Up Flag Internal. Set when a wakeup is + * detected on the internal wakeup line. + * OR a combination of following values: + * @arg PWR_FLAG_FLASH_READY: Flash is ready. Indicates whether flash + * can be used or not + * @arg PWR_FLAG_REGLPS: Low Power Regulator Started. Indicates whether + * or not the low-power regulator is ready. + * @arg PWR_FLAG_REGLPF: Low Power Regulator Flag. Indicates whether the + * regulator is ready in main mode or is in low-power mode. + * @if defined(STM32G081xx) + * @arg PWR_FLAG_PVDO: Power Voltage Detector Output. Indicates whether + * VDD voltage is below or above the selected PVD threshold. + * @endif + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_PWR_GET_FLAG(__FLAG__) (((__FLAG__) & 0x00010000u) ?\ + ((PWR->SR1 & ((__FLAG__) & ~0x00030000u)) == ((__FLAG__) & ~0x00030000u)) :\ + ((PWR->SR2 & ((__FLAG__) & ~0x00030000u)) == ((__FLAG__) & ~0x00030000u))) + +/** @brief Clear a specific PWR flag. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be a combination of following values: + * @arg PWR_FLAG_WUF1: Wake Up Flag 1. Indicates that a wakeup event + * was received from the WKUP pin 1. + * @arg PWR_FLAG_WUF2: Wake Up Flag 2. Indicates that a wakeup event + * was received from the WKUP pin 2. + * @arg PWR_FLAG_WUF3: Wake Up Flag 3. Indicates that a wakeup event + * was received from the WKUP pin 3. (*) + * @arg PWR_FLAG_WUF4: Wake Up Flag 4. Indicates that a wakeup event + * was received from the WKUP pin 4. + * @arg PWR_FLAG_WUF5: Wake Up Flag 5. Indicates that a wakeup event + * was received from the WKUP pin 5. (*) + * @arg PWR_FLAG_WUF6: Wake Up Flag 6. Indicates that a wakeup event + * was received from the WKUP pin 6. + * @arg PWR_FLAG_WUF: Encompasses all Wake Up Flags. + * @arg PWR_FLAG_SB: Standby Flag. Indicates that the system + * entered Standby mode. + * @retval None + */ +#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->SCR = (__FLAG__)) + +/** + * @} + */ + +/* Private constants-------------------------------------------------------*/ +/** @defgroup PWR_WUP_Polarity Shift to apply to retrieve polarity information from PWR_WAKEUP_PINy_xxx constants + * @{ + */ +#define PWR_WUP_POLARITY_SHIFT 0x08u /*!< Internal constant used to retrieve wakeup pin polariry */ +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup PWR_Private_Macros PWR Private Macros + * @{ + */ + +#define IS_PWR_WAKEUP_PIN(PIN) ((((PIN) & ((PWR_CR4_WP << 8U) | (PWR_CR3_EWUP))) != 0x00000000u) && \ + (((PIN) & ~((PWR_CR4_WP << 8U) | (PWR_CR3_EWUP))) == 0x00000000u)) + +#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ + ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) + +#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || \ + ((ENTRY) == PWR_SLEEPENTRY_WFE)) + +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || \ + ((ENTRY) == PWR_STOPENTRY_WFE)) +/** + * @} + */ + +/* Include PWR HAL Extended module */ +#include "stm32g0xx_hal_pwr_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions *******************************/ +void HAL_PWR_DeInit(void); +/** + * @} + */ + +/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @{ + */ +/* Peripheral Control functions ************************************************/ +void HAL_PWR_EnableBkUpAccess(void); +void HAL_PWR_DisableBkUpAccess(void); + +/* WakeUp pins configuration functions ****************************************/ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity); +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); + +/* Low Power modes configuration functions ************************************/ +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); +void HAL_PWR_EnterSTANDBYMode(void); +void HAL_PWR_EnableSleepOnExit(void); +void HAL_PWR_DisableSleepOnExit(void); +void HAL_PWR_EnableSEVOnPend(void); +void HAL_PWR_DisableSEVOnPend(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32G0xx_HAL_PWR_H */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr_ex.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr_ex.h new file mode 100644 index 0000000..7a33498 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr_ex.h @@ -0,0 +1,641 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pwr_ex.h + * @author MCD Application Team + * @brief Header file of PWR HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_PWR_EX_H +#define STM32G0xx_HAL_PWR_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup PWREx PWREx + * @brief PWR Extended HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PWREx_Exported_Types PWR Extended Exported Types + * @{ + */ + +#if defined(PWR_PVM_SUPPORT) +/** + * @brief PWR PVM configuration structure definition + */ +typedef struct +{ + uint32_t PVMType; /*!< PVMType: Specifies which voltage is monitored and against which threshold. + This parameter can be a value of @ref PWREx_PVM_Type. + @arg @ref PWR_PVM_USB Peripheral Voltage Monitoring USB enable */ + + uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. + This parameter can be a value of @ref PWREx_PVM_Mode. */ +} PWR_PVMTypeDef; +#endif /* PWR_PVM_SUPPORT */ + +#if defined(PWR_PVD_SUPPORT) +/** + * @brief PWR PVD configuration structure definition + */ +typedef struct +{ + uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. + This parameter can be a value or a combination of + @ref PWR_PVD_detection_level. */ + + uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. + This parameter can be a value of @ref PWR_PVD_Mode. */ +} PWR_PVDTypeDef; +#endif /* PWR_PVD_SUPPORT */ + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWREx_Exported_Constants PWR Extended Exported Constants + * @{ + */ +#if defined(PWR_PVD_SUPPORT) +/** @defgroup PWR_PVD_detection_level Programmable Voltage Detection levels + * @note see datasheet for selection voltage value + * @{ + */ +#define PWR_PVDLEVEL_RISING_0 (0x00000000u) /*!< PVD threshold level 0 for rising detection */ +#define PWR_PVDLEVEL_RISING_1 (PWR_CR2_PVDRT_0) /*!< PVD threshold level 1 for rising detection */ +#define PWR_PVDLEVEL_RISING_2 (PWR_CR2_PVDRT_1) /*!< PVD threshold level 2 for rising detection */ +#define PWR_PVDLEVEL_RISING_3 (PWR_CR2_PVDRT_0 | PWR_CR2_PVDRT_1) /*!< PVD threshold level 3 for rising detection */ +#define PWR_PVDLEVEL_RISING_4 (PWR_CR2_PVDRT_2) /*!< PVD threshold level 4 for rising detection */ +#define PWR_PVDLEVEL_RISING_5 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_0) /*!< PVD threshold level 5 for rising detection */ +#define PWR_PVDLEVEL_RISING_6 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_1) /*!< PVD threshold level 6 for rising detection */ +#define PWR_PVDLEVEL_FALLING_0 (0x00000000u) /*!< PVD threshold level 0 for falling detection */ +#define PWR_PVDLEVEL_FALLING_1 (PWR_CR2_PVDFT_0) /*!< PVD threshold level 1 for falling detection */ +#define PWR_PVDLEVEL_FALLING_2 (PWR_CR2_PVDFT_1) /*!< PVD threshold level 2 for falling detection */ +#define PWR_PVDLEVEL_FALLING_3 (PWR_CR2_PVDFT_0 | PWR_CR2_PVDFT_1) /*!< PVD threshold level 3 for falling detection */ +#define PWR_PVDLEVEL_FALLING_4 (PWR_CR2_PVDFT_2) /*!< PVD threshold level 4 for falling detection */ +#define PWR_PVDLEVEL_FALLING_5 (PWR_CR2_PVDFT_2 | PWR_CR2_PVDFT_0) /*!< PVD threshold level 5 for falling detection */ +#define PWR_PVDLEVEL_FALLING_6 (PWR_CR2_PVDFT_2 | PWR_CR2_PVDFT_1) /*!< PVD threshold level 6 for falling detection */ +#define PWR_PVDLEVEL_0 (PWR_PVDLEVEL_RISING_0 | PWR_PVDLEVEL_FALLING_0) /*!< same PVD threshold level 0 on rising & falling */ +#define PWR_PVDLEVEL_1 (PWR_PVDLEVEL_RISING_1 | PWR_PVDLEVEL_FALLING_1) /*!< same PVD threshold level 1 on rising & falling */ +#define PWR_PVDLEVEL_2 (PWR_PVDLEVEL_RISING_2 | PWR_PVDLEVEL_FALLING_2) /*!< same PVD threshold level 2 on rising & falling */ +#define PWR_PVDLEVEL_3 (PWR_PVDLEVEL_RISING_3 | PWR_PVDLEVEL_FALLING_3) /*!< same PVD threshold level 3 on rising & falling */ +#define PWR_PVDLEVEL_4 (PWR_PVDLEVEL_RISING_4 | PWR_PVDLEVEL_FALLING_4) /*!< same PVD threshold level 4 on rising & falling */ +#define PWR_PVDLEVEL_5 (PWR_PVDLEVEL_RISING_5 | PWR_PVDLEVEL_FALLING_5) /*!< same PVD threshold level 5 on rising & falling */ +#define PWR_PVDLEVEL_6 (PWR_PVDLEVEL_RISING_6 | PWR_PVDLEVEL_FALLING_6) /*!< same PVD threshold level 6 on rising & falling */ +#define PWR_PVDLEVEL_7 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_1 | PWR_CR2_PVDRT_0) /*!< External input analog voltage (compared internally to VREFINT) */ +/** + * @} + */ + +/** @defgroup PWR_PVD_Mode PWR PVD interrupt and event mode + * @{ + */ +#define PWR_PVD_MODE_NORMAL (0x00000000u) /*!< basic mode is used */ +#define PWR_PVD_MODE_IT_RISING (0x00010001u) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_IT_FALLING (0x00010002u) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_IT_RISING_FALLING (0x00010003u) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING (0x00020001u) /*!< Event Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_EVENT_FALLING (0x00020002u) /*!< Event Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING_FALLING (0x00020003u) /*!< Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + +/** @defgroup PWR_PVD_EXTI_LINE PWR PVD external interrupt line + * @{ + */ +#define PWR_EXTI_LINE_PVD (EXTI_IMR1_IM16) /*!< External interrupt line 16 connected to PVD */ +/** + * @} + */ + +/** @defgroup PWR_PVD_EVENT_LINE PWR PVD event line + * @{ + */ +#define PWR_EVENT_LINE_PVD (EXTI_EMR1_EM16) /*!< Event line 16 connected to PVD */ +/** + * @} + */ +#endif /* PWR_PVD_SUPPORT */ + +#if defined(PWR_PVM_SUPPORT) +/** @defgroup PWREx_PVM_Type Peripheral Voltage Monitoring type + * @{ + */ +#define PWR_PVM_USB PWR_CR2_PVMEN_USB /*!< Peripheral Voltage Monitoring enable for USB peripheral: Enable to keep the USB peripheral voltage monitoring under control (power domain Vddio2) */ +/** + * @} + */ +/** @defgroup PWREx_PVM_Mode PWR PVM interrupt and event mode + * @{ + */ +#define PWR_PVM_MODE_NORMAL ((uint32_t)0x00000000) /*!< basic mode is used */ +#define PWR_PVM_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define PWR_PVM_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define PWR_PVM_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define PWR_PVM_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */ +#define PWR_PVM_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */ +#define PWR_PVM_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ +/** @defgroup PWR_PVM_EXTI_LINE PWR PVM external interrupt line + * @{ + */ +#define PWR_EXTI_LINE_PVM (EXTI_IMR2_IM34) /*!< External interrupt line 34 connected to PVM */ +/** + * @} + */ + +/** @defgroup PWR_PVM_EVENT_LINE PWR PVM event line + * @{ + */ +#define PWR_EVENT_LINE_PVM (EXTI_EMR2_EM34) /*!< Event line 34 connected to PVM */ +/** + * @} + */ +#endif /* PWR_PVM_SUPPORT */ + +/** @defgroup PWREx_VBAT_Battery_Charging_Selection PWR battery charging resistor selection + * @{ + */ +#define PWR_BATTERY_CHARGING_RESISTOR_5 (0x00000000u) /*!< VBAT charging through a 5 kOhms resistor */ +#define PWR_BATTERY_CHARGING_RESISTOR_1_5 PWR_CR4_VBRS /*!< VBAT charging through a 1.5 kOhms resistor */ +/** + * @} + */ + +/** @defgroup PWREx_GPIO_Bit_Number GPIO bit position + * @brief for I/O pull up/down setting in standby/shutdown mode + * @{ + */ +#define PWR_GPIO_BIT_0 PWR_PUCRB_PU0 /*!< GPIO port I/O pin 0 */ +#define PWR_GPIO_BIT_1 PWR_PUCRB_PU1 /*!< GPIO port I/O pin 1 */ +#define PWR_GPIO_BIT_2 PWR_PUCRB_PU2 /*!< GPIO port I/O pin 2 */ +#define PWR_GPIO_BIT_3 PWR_PUCRB_PU3 /*!< GPIO port I/O pin 3 */ +#define PWR_GPIO_BIT_4 PWR_PUCRB_PU4 /*!< GPIO port I/O pin 4 */ +#define PWR_GPIO_BIT_5 PWR_PUCRB_PU5 /*!< GPIO port I/O pin 5 */ +#define PWR_GPIO_BIT_6 PWR_PUCRB_PU6 /*!< GPIO port I/O pin 6 */ +#define PWR_GPIO_BIT_7 PWR_PUCRB_PU7 /*!< GPIO port I/O pin 7 */ +#define PWR_GPIO_BIT_8 PWR_PUCRB_PU8 /*!< GPIO port I/O pin 8 */ +#define PWR_GPIO_BIT_9 PWR_PUCRB_PU9 /*!< GPIO port I/O pin 9 */ +#define PWR_GPIO_BIT_10 PWR_PUCRB_PU10 /*!< GPIO port I/O pin 10 */ +#define PWR_GPIO_BIT_11 PWR_PUCRB_PU11 /*!< GPIO port I/O pin 11 */ +#define PWR_GPIO_BIT_12 PWR_PUCRB_PU12 /*!< GPIO port I/O pin 12 */ +#define PWR_GPIO_BIT_13 PWR_PUCRB_PU13 /*!< GPIO port I/O pin 13 */ +#define PWR_GPIO_BIT_14 PWR_PUCRB_PU14 /*!< GPIO port I/O pin 14 */ +#define PWR_GPIO_BIT_15 PWR_PUCRB_PU15 /*!< GPIO port I/O pin 15 */ +/** + * @} + */ + +/** @defgroup PWREx_GPIO_Port GPIO Port + * @{ + */ +#define PWR_GPIO_A (0x00000000u) /*!< GPIO port A */ +#define PWR_GPIO_B (0x00000001u) /*!< GPIO port B */ +#define PWR_GPIO_C (0x00000002u) /*!< GPIO port C */ +#define PWR_GPIO_D (0x00000003u) /*!< GPIO port D */ +#if defined (GPIOE) +#define PWR_GPIO_E (0x00000004u) /*!< GPIO port E */ +#endif /* GPIOE */ +#define PWR_GPIO_F (0x00000005u) /*!< GPIO port F */ +/** + * @} + */ + +/** @defgroup PWREx_Flash_PowerDown Flash Power Down modes + * @{ + */ +#define PWR_FLASHPD_LPRUN PWR_CR1_FPD_LPRUN /*!< Enable Flash power down in low power run mode */ +#define PWR_FLASHPD_LPSLEEP PWR_CR1_FPD_LPSLP /*!< Enable Flash power down in low power sleep mode */ +#define PWR_FLASHPD_STOP PWR_CR1_FPD_STOP /*!< Enable Flash power down in stop mode */ +/** + * @} + */ + +/** @defgroup PWREx_Regulator_Voltage_Scale PWR Regulator voltage scale + * @{ + */ +#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR1_VOS_0 /*!< Voltage scaling range 1 */ +#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR1_VOS_1 /*!< Voltage scaling range 2 */ +/** + * @} + */ + +/** @addtogroup PWR_Flag PWR Status Flags + * @brief Elements values convention: 0000 00XX 000Y YYYYb + * - Y YYYY : Flag position in the XX register (5 bits) + * - XX : Status register (2 bits) + * - 01: SR1 register + * - 10: SR2 register + * The only exception is PWR_FLAG_WU, encompassing all + * wake-up flags and set to PWR_SR1_WUF. + * @{ + */ +#if defined(PWR_PVM_SUPPORT) +#define PWR_FLAG_PVMOUSB (0x00020000u | PWR_SR2_PVMO_USB) /*!< USB Peripheral Voltage Monitoring output */ +#endif /* PWR_PVM_SUPPORT */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @addtogroup PWREx_Exported_Macros PWR Extended Exported Macros + * @{ + */ +#if defined(PWR_PVD_SUPPORT) +/** + * @brief Enable the PVD Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Event Line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD) + +/** + * @brief Disable the PVD Event Line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD) + +/** + * @brief Enable the PVD Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0U) + +/** + * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0U) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_PVD) + +/** + * @brief Check whether or not the PVD EXTI interrupt Rising flag is set. + * @retval EXTI PVD Line Status. + */ +#define __HAL_PWR_PVD_EXTI_GET_RISING_FLAG() (EXTI->RPR1 & PWR_EXTI_LINE_PVD) + +/** + * @brief Check whether or not the PVD EXTI interrupt Falling flag is set. + * @retval EXTI PVD Line Status. + */ +#define __HAL_PWR_PVD_EXTI_GET_FALLING_FLAG() (EXTI->FPR1 & PWR_EXTI_LINE_PVD) + +/** + * @brief Clear the PVD EXTI interrupt Rising flag. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_CLEAR_RISING_FLAG() WRITE_REG(EXTI->RPR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Clear the PVD EXTI interrupt Falling flag. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_CLEAR_FALLING_FLAG() WRITE_REG(EXTI->FPR1, PWR_EXTI_LINE_PVD) +#endif /* PWR_PVD_SUPPORT */ + +#if defined(PWR_PVM_SUPPORT) +/** + * @brief Enable the PVM Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM) + +/** + * @brief Disable the PVM Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM) + +/** + * @brief Enable the PVM Event Line. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM) + +/** + * @brief Disable the PVM Event Line. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM) + +/** + * @brief Enable the PVM Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM) + +/** + * @brief Disable the PVM Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM) + +/** + * @brief Enable the PVM Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM) + +/** + * @brief Disable the PVM Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM) + +/** + * @brief Enable the PVM Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_PVM_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0U) + +/** + * @brief Disable the PVM Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVM_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0U) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, PWR_EXTI_LINE_PVM) + +/** + * @brief Check whether or not the PVM EXTI interrupt Rising flag is set. + * @retval EXTI PVM Line Status. + */ +#define __HAL_PWR_PVM_EXTI_GET_RISING_FLAG() (EXTI->RPR2 & PWR_EXTI_LINE_PVM) + +/** + * @brief Check whether or not the PVM EXTI interrupt Falling flag is set. + * @retval EXTI PVM Line Status. + */ +#define __HAL_PWR_PVM_EXTI_GET_FALLING_FLAG() (EXTI->FPR2 & PWR_EXTI_LINE_PVM) + +/** + * @brief Clear the PVM EXTI interrupt Rising flag. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_CLEAR_RISING_FLAG() WRITE_REG(EXTI->RPR2, PWR_EXTI_LINE_PVM) + +/** + * @brief Clear the PVM EXTI interrupt Falling flag. + * @retval None + */ +#define __HAL_PWR_PVM_EXTI_CLEAR_FALLING_FLAG() WRITE_REG(EXTI->FPR2, PWR_EXTI_LINE_PVM) +#endif /* PWR_PVM_SUPPORT */ +/** + * @} + */ + +/* Private define ------------------------------------------------------------*/ +/** @defgroup PWR_Extended_Private_Defines PWR Extended Private Defines + * @{ + */ + +/** @defgroup PWREx_PVM_Mode_Mask PWR PVM Mode Mask + * @{ + */ +#define PVM_MODE_IT ((uint32_t)0x00010000) /*!< Mask for interruption yielded by PVM threshold crossing */ +#define PVM_MODE_EVT ((uint32_t)0x00020000) /*!< Mask for event yielded by PVM threshold crossing */ +#define PVM_RISING_EDGE ((uint32_t)0x00000001) /*!< Mask for rising edge set as PVM trigger */ +#define PVM_FALLING_EDGE ((uint32_t)0x00000002) /*!< Mask for falling edge set as PVM trigger */ +/** + * @} + */ + +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup PWREx_Private_Macros PWR Extended Private Macros + * @{ + */ + +#define IS_PWR_BATTERY_RESISTOR_SELECT(__RESISTOR__) (((__RESISTOR__) == PWR_BATTERY_CHARGING_RESISTOR_5) || \ + ((__RESISTOR__) == PWR_BATTERY_CHARGING_RESISTOR_1_5)) + +#define IS_PWR_GPIO_BIT_NUMBER(__BIT_NUMBER__) ((((__BIT_NUMBER__) & 0x0000FFFFu) != 0x00u) && \ + (((__BIT_NUMBER__) & 0xFFFF0000u) == 0x00u)) +#if defined (GPIOE) +#define IS_PWR_GPIO(__GPIO__) (((__GPIO__) == PWR_GPIO_A) || \ + ((__GPIO__) == PWR_GPIO_B) || \ + ((__GPIO__) == PWR_GPIO_C) || \ + ((__GPIO__) == PWR_GPIO_D) || \ + ((__GPIO__) == PWR_GPIO_E) || \ + ((__GPIO__) == PWR_GPIO_F)) +#else +#define IS_PWR_GPIO(__GPIO__) (((__GPIO__) == PWR_GPIO_A) || \ + ((__GPIO__) == PWR_GPIO_B) || \ + ((__GPIO__) == PWR_GPIO_C) || \ + ((__GPIO__) == PWR_GPIO_D) || \ + ((__GPIO__) == PWR_GPIO_F)) +#endif /* GPIOE */ + +#define IS_PWR_FLASH_POWERDOWN(__MODE__) ((((__MODE__) & (PWR_FLASHPD_LPRUN | PWR_FLASHPD_LPSLEEP | PWR_FLASHPD_STOP)) != 0x00u) && \ + (((__MODE__) & ~(PWR_FLASHPD_LPRUN | PWR_FLASHPD_LPSLEEP | PWR_FLASHPD_STOP)) == 0x00u)) + +#define IS_PWR_VOLTAGE_SCALING_RANGE(RANGE) (((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ + ((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE2)) + +#if defined(PWR_PVD_SUPPORT) +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) & ~(PWR_CR2_PVDRT | PWR_CR2_PVDFT)) == 0x00000000u) + +#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_NORMAL) || \ + ((MODE) == PWR_PVD_MODE_IT_RISING) || \ + ((MODE) == PWR_PVD_MODE_IT_FALLING) || \ + ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || \ + ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \ + ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || \ + ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING)) +#endif /* PWR_PVD_SUPPORT */ + +#if defined(PWR_PVM_SUPPORT) +#define IS_PWR_PVM_TYPE(TYPE) ((TYPE) == PWR_PVM_USB) + +#define IS_PWR_PVM_MODE(MODE) (((MODE) == PWR_PVM_MODE_NORMAL) ||\ + ((MODE) == PWR_PVM_MODE_IT_RISING) ||\ + ((MODE) == PWR_PVM_MODE_IT_FALLING) ||\ + ((MODE) == PWR_PVM_MODE_IT_RISING_FALLING) ||\ + ((MODE) == PWR_PVM_MODE_EVENT_RISING) ||\ + ((MODE) == PWR_PVM_MODE_EVENT_FALLING) ||\ + ((MODE) == PWR_PVM_MODE_EVENT_RISING_FALLING)) +#endif /* PWR_PVM_SUPPORT */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PWREx_Exported_Functions PWR Extended Exported Functions + * @{ + */ + +/** @defgroup PWREx_Exported_Functions_Group1 Extended Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions **********************************************/ +void HAL_PWREx_EnableBatteryCharging(uint32_t ResistorSelection); +void HAL_PWREx_DisableBatteryCharging(void); +#if defined(PWR_CR3_ENB_ULP) +void HAL_PWREx_EnablePORMonitorSampling(void); +void HAL_PWREx_DisablePORMonitorSampling(void); +#endif /* PWR_CR3_ENB_ULP */ +void HAL_PWREx_EnableInternalWakeUpLine(void); +void HAL_PWREx_DisableInternalWakeUpLine(void); +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber); +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber); +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber); +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber); +void HAL_PWREx_EnablePullUpPullDownConfig(void); +void HAL_PWREx_DisablePullUpPullDownConfig(void); +#if defined(PWR_CR3_RRS) +void HAL_PWREx_EnableSRAMRetention(void); +void HAL_PWREx_DisableSRAMRetention(void); +#endif /* PWR_CR3_RRS */ +void HAL_PWREx_EnableFlashPowerDown(uint32_t PowerMode); +void HAL_PWREx_DisableFlashPowerDown(uint32_t PowerMode); +uint32_t HAL_PWREx_GetVoltageRange(void); +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling); +#if defined(PWR_PVD_SUPPORT) +/* Power voltage detection configuration functions ****************************/ +HAL_StatusTypeDef HAL_PWREx_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); +void HAL_PWREx_EnablePVD(void); +void HAL_PWREx_DisablePVD(void); +#endif /* PWR_PVD_SUPPORT */ +#if defined(PWR_PVM_SUPPORT) +/* Power voltage monitoring configuration functions ***************************/ +void HAL_PWREx_EnableVddIO2(void); +void HAL_PWREx_DisableVddIO2(void); +void HAL_PWREx_EnablePVMUSB(void); +void HAL_PWREx_DisablePVMUSB(void); +HAL_StatusTypeDef HAL_PWREx_ConfigPVM(PWR_PVMTypeDef *sConfigPVM); +#endif /* PWR_PVM_SUPPORT */ +#if defined(PWR_CR2_USV) +void HAL_PWREx_EnableVddUSB(void); +void HAL_PWREx_DisableVddUSB(void); +#endif /* PWR_CR2_USV */ +/* Low Power modes configuration functions ************************************/ +void HAL_PWREx_EnableLowPowerRunMode(void); +HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void); +#if defined(PWR_SHDW_SUPPORT) +void HAL_PWREx_EnterSHUTDOWNMode(void); +#endif /* PWR_SHDW_SUPPORT */ + +#if defined(PWR_PVD_SUPPORT) && defined(PWR_PVM_SUPPORT) +void HAL_PWREx_PVD_PVM_IRQHandler(void); +void HAL_PWREx_PVD_PVM_Rising_Callback(void); +void HAL_PWREx_PVD_PVM_Falling_Callback(void); +#elif defined(PWR_PVD_SUPPORT) +void HAL_PWREx_PVD_IRQHandler(void); +void HAL_PWREx_PVD_Rising_Callback(void); +void HAL_PWREx_PVD_Falling_Callback(void); +#endif /* PWR_PVD_SUPPORT && PWR_PVM_SUPPORT */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32G0xx_HAL_PWR_EX_H */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc.h new file mode 100644 index 0000000..dce1f7b --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc.h @@ -0,0 +1,3169 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rcc.h + * @author MCD Application Team + * @brief Header file of RCC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_RCC_H +#define STM32G0xx_HAL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" +#include "stm32g0xx_ll_rcc.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup RCC_Private_Constants + * @{ + */ +/* Defines used for Flags */ +#define CR_REG_INDEX 1U +#define BDCR_REG_INDEX 2U +#define CSR_REG_INDEX 3U +#if defined(RCC_HSI48_SUPPORT) +#define CRRCR_REG_INDEX 4U +#endif /* RCC_HSI48_SUPPORT */ + +#define RCC_FLAG_MASK 0x1FU + +/* Define used for IS_RCC_CLOCKTYPE() */ +#define RCC_CLOCKTYPE_ALL (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1) /*!< All clocktype to configure */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCC_Private_Macros + * @{ + */ + +#if defined(RCC_HSI48_SUPPORT) +#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) \ + (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)) +#else +#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) \ + (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)) +#endif /* RCC_HSI48_SUPPORT */ + +#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \ + ((__HSE__) == RCC_HSE_BYPASS)) + +#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \ + ((__LSE__) == RCC_LSE_BYPASS)) + +#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON)) + +#if defined(RCC_HSI48_SUPPORT) +#define IS_RCC_HSI48(__HSI48__) (((__HSI48__) == RCC_HSI48_OFF) || ((__HSI48__) == RCC_HSI48_ON)) +#endif /* RCC_HSI48_SUPPORT */ + +#define IS_RCC_HSI_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= (uint32_t)127U) + +#define IS_RCC_HSIDIV(__DIV__) (((__DIV__) == RCC_HSI_DIV1) || ((__DIV__) == RCC_HSI_DIV2) || \ + ((__DIV__) == RCC_HSI_DIV4) || ((__DIV__) == RCC_HSI_DIV8) || \ + ((__DIV__) == RCC_HSI_DIV16) || ((__DIV__) == RCC_HSI_DIV32)|| \ + ((__DIV__) == RCC_HSI_DIV64) || ((__DIV__) == RCC_HSI_DIV128)) + +#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON)) + +#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) ||((__PLL__) == RCC_PLL_OFF) || \ + ((__PLL__) == RCC_PLL_ON)) + +#define IS_RCC_PLLSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLSOURCE_NONE) || \ + ((__SOURCE__) == RCC_PLLSOURCE_HSI) || \ + ((__SOURCE__) == RCC_PLLSOURCE_HSE)) + +#define IS_RCC_PLLM_VALUE(__VALUE__) (((__VALUE__) == RCC_PLLM_DIV1) || ((__VALUE__) == RCC_PLLM_DIV2) || \ + ((__VALUE__) == RCC_PLLM_DIV3) || ((__VALUE__) == RCC_PLLM_DIV4) || \ + ((__VALUE__) == RCC_PLLM_DIV5) || ((__VALUE__) == RCC_PLLM_DIV6) || \ + ((__VALUE__) == RCC_PLLM_DIV7) || ((__VALUE__) == RCC_PLLM_DIV8)) + +#define IS_RCC_PLLN_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 86U)) + +#define IS_RCC_PLLP_VALUE(__VALUE__) ((RCC_PLLP_DIV2 <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLP_DIV32)) + +#if defined(RCC_PLLQ_SUPPORT) +#define IS_RCC_PLLQ_VALUE(__VALUE__) ((RCC_PLLQ_DIV2 <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLQ_DIV8)) +#endif /* RCC_PLLQ_SUPPORT */ + +#define IS_RCC_PLLR_VALUE(__VALUE__) ((RCC_PLLR_DIV2 <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLR_DIV8)) + +#define IS_RCC_CLOCKTYPE(__CLK__) ((((__CLK__)\ + & RCC_CLOCKTYPE_ALL) != 0x00UL) && (((__CLK__) & ~RCC_CLOCKTYPE_ALL) == 0x00UL)) + +#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_PLLCLK)) + +#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \ + ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \ + ((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV64) || \ + ((__HCLK__) == RCC_SYSCLK_DIV128) || ((__HCLK__) == RCC_SYSCLK_DIV256) || \ + ((__HCLK__) == RCC_SYSCLK_DIV512)) + +#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \ + ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \ + ((__PCLK__) == RCC_HCLK_DIV16)) + +#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV32)) + +#if defined(RCC_MCO2_SUPPORT) +#define IS_RCC_MCO(__MCOX__) ( ((__MCOX__) == RCC_MCO_PA8) || \ + ((__MCOX__) == RCC_MCO_PA9) || \ + ((__MCOX__) == RCC_MCO_PD10) || \ + ((__MCOX__) == RCC_MCO_PF2) || \ + ((__MCOX__) == RCC_MCO_PA10) || \ + ((__MCOX__) == RCC_MCO_PA15) || \ + ((__MCOX__) == RCC_MCO_PB2) || \ + ((__MCOX__) == RCC_MCO_PD7)) +#else +#define IS_RCC_MCO(__MCOX__) ( ((__MCOX__) == RCC_MCO_PA8) || \ + ((__MCOX__) == RCC_MCO_PA9) || \ + ((__MCOX__) == RCC_MCO_PD10) || \ + ((__MCOX__) == RCC_MCO_PF2)) +#endif /* RCC_MCO2_SUPPORT */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI48) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLPCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLQCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_RTCCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_RTC_WKUP)) +#elif defined(STM32G0B0xx) +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLPCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLQCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_RTCCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_RTC_WKUP)) +#else +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSE)) +#endif /* STM32G0C1xx || STM32G0B1xx */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_1) || ((__DIV__) == RCC_MCODIV_2) || \ + ((__DIV__) == RCC_MCODIV_4) || ((__DIV__) == RCC_MCODIV_8) || \ + ((__DIV__) == RCC_MCODIV_16) || ((__DIV__) == RCC_MCODIV_32) || \ + ((__DIV__) == RCC_MCODIV_64) || ((__DIV__) == RCC_MCODIV_128) || \ + ((__DIV__) == RCC_MCODIV_256)|| ((__DIV__) == RCC_MCODIV_512) || \ + ((__DIV__) == RCC_MCODIV_1024)) +#else +#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_1) || ((__DIV__) == RCC_MCODIV_2) || \ + ((__DIV__) == RCC_MCODIV_4) || ((__DIV__) == RCC_MCODIV_8) || \ + ((__DIV__) == RCC_MCODIV_16) || ((__DIV__) == RCC_MCODIV_32) || \ + ((__DIV__) == RCC_MCODIV_64) || ((__DIV__) == RCC_MCODIV_128)) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(RCC_MCO2_SUPPORT) +#if defined(RCC_HSI48_SUPPORT) +#define IS_RCC_MCO2SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO2SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_HSI48) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_LSI) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_LSE) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_PLLPCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_PLLQCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_RTCCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_RTC_WKUP)) +#else +#define IS_RCC_MCO2SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO2SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_LSI) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_LSE) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_PLLPCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_PLLQCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_RTCCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_RTC_WKUP)) +#endif /* RCC_HSI48_SUPPORT */ +#define IS_RCC_MCO2DIV(__DIV__) (((__DIV__) == RCC_MCO2DIV_1) || ((__DIV__) == RCC_MCO2DIV_2) || \ + ((__DIV__) == RCC_MCO2DIV_4) || ((__DIV__) == RCC_MCO2DIV_8) || \ + ((__DIV__) == RCC_MCO2DIV_16) || ((__DIV__) == RCC_MCO2DIV_32) || \ + ((__DIV__) == RCC_MCO2DIV_64) || ((__DIV__) == RCC_MCO2DIV_128)|| \ + ((__DIV__) == RCC_MCO2DIV_256)|| ((__DIV__) == RCC_MCO2DIV_512)|| \ + ((__DIV__) == RCC_MCO2DIV_1024)) + +#endif /* RCC_MCO2_SUPPORT */ + +#define IS_RCC_LSE_DRIVE(__DRIVE__) (((__DRIVE__) == RCC_LSEDRIVE_LOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMLOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMHIGH) || \ + ((__DRIVE__) == RCC_LSEDRIVE_HIGH)) + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RCC_Exported_Types RCC Exported Types + * @{ + */ + +/** + * @brief RCC PLL configuration structure definition + */ +typedef struct +{ + uint32_t PLLState; /*!< The new state of the PLL. + This parameter can be a value of @ref RCC_PLL_Config */ + + uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source. + This parameter must be a value of @ref RCC_PLL_Clock_Source */ + + uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock. + This parameter must be a value of @ref RCC_PLLM_Clock_Divider */ + + uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock. + This parameter must be a number between Min_Data = 8 and Max_Data = 86 */ + + uint32_t PLLP; /*!< PLLP: PLL Division factor. + User have to set the PLLQ parameter correctly to not exceed max frequency 64MHZ. + This parameter must be a value of @ref RCC_PLLP_Clock_Divider */ + +#if defined(RCC_PLLQ_SUPPORT) + uint32_t PLLQ; /*!< PLLQ: PLL Division factor. + User have to set the PLLQ parameter correctly to not exceed max frequency 64MHZ. + This parameter must be a value of @ref RCC_PLLQ_Clock_Divider */ +#endif /* RCC_PLLQ_SUPPORT */ + + uint32_t PLLR; /*!< PLLR: PLL Division for the main system clock. + User have to set the PLLR parameter correctly to not exceed max frequency 64MHZ. + This parameter must be a value of @ref RCC_PLLR_Clock_Divider */ + +} RCC_PLLInitTypeDef; + +/** + * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition + */ +typedef struct +{ + uint32_t OscillatorType; /*!< The oscillators to be configured. + This parameter can be a value of @ref RCC_Oscillator_Type */ + + uint32_t HSEState; /*!< The new state of the HSE. + This parameter can be a value of @ref RCC_HSE_Config */ + + uint32_t LSEState; /*!< The new state of the LSE. + This parameter can be a value of @ref RCC_LSE_Config */ + + uint32_t HSIState; /*!< The new state of the HSI. + This parameter can be a value of @ref RCC_HSI_Config */ + + uint32_t HSIDiv; /*!< The division factor of the HSI16. + This parameter can be a value of @ref RCC_HSI_Div */ + + uint32_t HSICalibrationValue; /*!< The calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT). + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */ + + uint32_t LSIState; /*!< The new state of the LSI. + This parameter can be a value of @ref RCC_LSI_Config */ + +#if defined(RCC_HSI48_SUPPORT) + uint32_t HSI48State; /*!< The new state of the HSI48 (only applicable to STM32G0C1xx/STM32G0B1xx/STM32G0B0xx devices). + This parameter can be a value of @ref RCC_HSI48_Config */ + +#endif /* RCC_HSI48_SUPPORT */ + + RCC_PLLInitTypeDef PLL; /*!< Main PLL structure parameters */ + +} RCC_OscInitTypeDef; + +/** + * @brief RCC System, AHB and APB buses clock configuration structure definition + */ +typedef struct +{ + uint32_t ClockType; /*!< The clock to be configured. + This parameter can be a combination of @ref RCC_System_Clock_Type */ + + uint32_t SYSCLKSource; /*!< The clock source used as system clock (SYSCLK). + This parameter can be a value of @ref RCC_System_Clock_Source */ + + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_AHB_Clock_Source */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB1_Clock_Source */ + + +} RCC_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_Timeout_Value Timeout Values + * @{ + */ +#define RCC_DBP_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT /* LSE timeout in ms */ +/** + * @} + */ + +/** @defgroup RCC_Oscillator_Type Oscillator Type + * @{ + */ +#define RCC_OSCILLATORTYPE_NONE 0x00000000U /*!< Oscillator configuration unchanged */ +#define RCC_OSCILLATORTYPE_HSE 0x00000001U /*!< HSE to configure */ +#define RCC_OSCILLATORTYPE_HSI 0x00000002U /*!< HSI to configure */ +#define RCC_OSCILLATORTYPE_LSE 0x00000004U /*!< LSE to configure */ +#define RCC_OSCILLATORTYPE_LSI 0x00000008U /*!< LSI to configure */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_OSCILLATORTYPE_HSI48 0x00000020U /*!< HSI48 to configure */ +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @} + */ + +/** @defgroup RCC_HSE_Config HSE Config + * @{ + */ +#define RCC_HSE_OFF 0x00000000U /*!< HSE clock deactivation */ +#define RCC_HSE_ON RCC_CR_HSEON /*!< HSE clock activation */ +#define RCC_HSE_BYPASS (RCC_CR_HSEBYP | RCC_CR_HSEON) /*!< External clock source for HSE clock */ +/** + * @} + */ + +/** @defgroup RCC_LSE_Config LSE Config + * @{ + */ +#define RCC_LSE_OFF 0x00000000U /*!< LSE clock deactivation */ +#define RCC_LSE_ON RCC_BDCR_LSEON /*!< LSE clock activation */ +#define RCC_LSE_BYPASS (RCC_BDCR_LSEBYP | RCC_BDCR_LSEON) /*!< External clock source for LSE clock */ +/** + * @} + */ + +/** @defgroup RCC_HSI_Config HSI Config + * @{ + */ +#define RCC_HSI_OFF 0x00000000U /*!< HSI clock deactivation */ +#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */ + +#define RCC_HSICALIBRATION_DEFAULT 64U /*!< Default HSI calibration trimming value */ +/** + * @} + */ + +/** @defgroup RCC_HSI_Div HSI Div + * @{ + */ +#define RCC_HSI_DIV1 0x00000000U /*!< HSI clock is not divided */ +#define RCC_HSI_DIV2 RCC_CR_HSIDIV_0 /*!< HSI clock is divided by 2 */ +#define RCC_HSI_DIV4 RCC_CR_HSIDIV_1 /*!< HSI clock is divided by 4 */ +#define RCC_HSI_DIV8 (RCC_CR_HSIDIV_1|RCC_CR_HSIDIV_0) /*!< HSI clock is divided by 8 */ +#define RCC_HSI_DIV16 RCC_CR_HSIDIV_2 /*!< HSI clock is divided by 16 */ +#define RCC_HSI_DIV32 (RCC_CR_HSIDIV_2|RCC_CR_HSIDIV_0) /*!< HSI clock is divided by 32 */ +#define RCC_HSI_DIV64 (RCC_CR_HSIDIV_2|RCC_CR_HSIDIV_1) /*!< HSI clock is divided by 64 */ +#define RCC_HSI_DIV128 (RCC_CR_HSIDIV_2|RCC_CR_HSIDIV_1|RCC_CR_HSIDIV_0) /*!< HSI clock is divided by 128 */ +/** + * @} + */ + +/** @defgroup RCC_LSI_Config LSI Config + * @{ + */ +#define RCC_LSI_OFF 0x00000000U /*!< LSI clock deactivation */ +#define RCC_LSI_ON RCC_CSR_LSION /*!< LSI clock activation */ +/** + * @} + */ + +#if defined(RCC_HSI48_SUPPORT) +/** @defgroup RCC_HSI48_Config HSI48 Config + * @{ + */ +#define RCC_HSI48_OFF 0x00000000U /*!< HSI48 clock deactivation */ +#define RCC_HSI48_ON RCC_CR_HSI48ON /*!< HSI48 clock activation */ +/** + * @} + */ +#endif /* RCC_HSI48_SUPPORT */ + +/** @defgroup RCC_PLL_Config PLL Config + * @{ + */ +#define RCC_PLL_NONE 0x00000000U /*!< PLL configuration unchanged */ +#define RCC_PLL_OFF 0x00000001U /*!< PLL deactivation */ +#define RCC_PLL_ON 0x00000002U /*!< PLL activation */ +/** + * @} + */ + +/** @defgroup RCC_PLLM_Clock_Divider PLLM Clock Divider + * @{ + */ +#define RCC_PLLM_DIV1 0x00000000U /*!< PLLM division factor = 8 */ +#define RCC_PLLM_DIV2 RCC_PLLCFGR_PLLM_0 /*!< PLLM division factor = 2 */ +#define RCC_PLLM_DIV3 RCC_PLLCFGR_PLLM_1 /*!< PLLM division factor = 3 */ +#define RCC_PLLM_DIV4 (RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLLM division factor = 4 */ +#define RCC_PLLM_DIV5 RCC_PLLCFGR_PLLM_2 /*!< PLLM division factor = 5 */ +#define RCC_PLLM_DIV6 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLLM division factor = 6 */ +#define RCC_PLLM_DIV7 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLLM division factor = 7 */ +#define RCC_PLLM_DIV8 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1| RCC_PLLCFGR_PLLM_0) /*!< PLLM division factor = 8 */ +/** + * @} + */ + +/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider + * @{ + */ +#define RCC_PLLP_DIV2 RCC_PLLCFGR_PLLP_0 /*!< PLLP division factor = 2 */ +#define RCC_PLLP_DIV3 RCC_PLLCFGR_PLLP_1 /*!< PLLP division factor = 3 */ +#define RCC_PLLP_DIV4 (RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 4 */ +#define RCC_PLLP_DIV5 RCC_PLLCFGR_PLLP_2 /*!< PLLP division factor = 5 */ +#define RCC_PLLP_DIV6 (RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 6 */ +#define RCC_PLLP_DIV7 (RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1) /*!< PLLP division factor = 7 */ +#define RCC_PLLP_DIV8 (RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 8 */ +#define RCC_PLLP_DIV9 RCC_PLLCFGR_PLLP_3 /*!< PLLP division factor = 9 */ +#define RCC_PLLP_DIV10 (RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 10 */ +#define RCC_PLLP_DIV11 (RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_1) /*!< PLLP division factor = 11 */ +#define RCC_PLLP_DIV12 (RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 12 */ +#define RCC_PLLP_DIV13 (RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2) /*!< PLLP division factor = 13 */ +#define RCC_PLLP_DIV14 (RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 14 */ +#define RCC_PLLP_DIV15 (RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1) /*!< PLLP division factor = 15 */ +#define RCC_PLLP_DIV16 (RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 16 */ +#define RCC_PLLP_DIV17 RCC_PLLCFGR_PLLP_4 /*!< PLLP division factor = 17 */ +#define RCC_PLLP_DIV18 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 18 */ +#define RCC_PLLP_DIV19 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_1) /*!< PLLP division factor = 19 */ +#define RCC_PLLP_DIV20 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 20 */ +#define RCC_PLLP_DIV21 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_2) /*!< PLLP division factor = 21 */ +#define RCC_PLLP_DIV22 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 22 */ +#define RCC_PLLP_DIV23 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1) /*!< PLLP division factor = 23 */ +#define RCC_PLLP_DIV24 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 24 */ +#define RCC_PLLP_DIV25 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3) /*!< PLLP division factor = 25 */ +#define RCC_PLLP_DIV26 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 26 */ +#define RCC_PLLP_DIV27 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_1) /*!< PLLP division factor = 27 */ +#define RCC_PLLP_DIV28 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 28 */ +#define RCC_PLLP_DIV29 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2) /*!< PLLP division factor = 29 */ +#define RCC_PLLP_DIV30 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 30 */ +#define RCC_PLLP_DIV31 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1) /*!< PLLP division factor = 31 */ +#define RCC_PLLP_DIV32 (RCC_PLLCFGR_PLLP_4 | RCC_PLLCFGR_PLLP_3 | RCC_PLLCFGR_PLLP_2 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< PLLP division factor = 32 */ +/** + * @} + */ + +#if defined(RCC_PLLQ_SUPPORT) +/** @defgroup RCC_PLLQ_Clock_Divider PLLQ Clock Divider + * @{ + */ +#define RCC_PLLQ_DIV2 RCC_PLLCFGR_PLLQ_0 /*!< PLLQ division factor = 2 */ +#define RCC_PLLQ_DIV3 RCC_PLLCFGR_PLLQ_1 /*!< PLLQ division factor = 3 */ +#define RCC_PLLQ_DIV4 (RCC_PLLCFGR_PLLQ_1 | RCC_PLLCFGR_PLLQ_0) /*!< PLLQ division factor = 4 */ +#define RCC_PLLQ_DIV5 RCC_PLLCFGR_PLLQ_2 /*!< PLLQ division factor = 5 */ +#define RCC_PLLQ_DIV6 (RCC_PLLCFGR_PLLQ_2 | RCC_PLLCFGR_PLLQ_0) /*!< PLLQ division factor = 6 */ +#define RCC_PLLQ_DIV7 (RCC_PLLCFGR_PLLQ_2 | RCC_PLLCFGR_PLLQ_1) /*!< PLLQ division factor = 7 */ +#define RCC_PLLQ_DIV8 (RCC_PLLCFGR_PLLQ_2 |RCC_PLLCFGR_PLLQ_1 | RCC_PLLCFGR_PLLQ_0) /*!< PLLQ division factor = 8 */ +/** * @} + */ +#endif /* RCC_PLLQ_SUPPORT */ + +/** @defgroup RCC_PLLR_Clock_Divider PLLR Clock Divider + * @{ + */ +#define RCC_PLLR_DIV2 RCC_PLLCFGR_PLLR_0 /*!< PLLR division factor = 2 */ +#define RCC_PLLR_DIV3 RCC_PLLCFGR_PLLR_1 /*!< PLLR division factor = 3 */ +#define RCC_PLLR_DIV4 (RCC_PLLCFGR_PLLR_1 | RCC_PLLCFGR_PLLR_0) /*!< PLLR division factor = 4 */ +#define RCC_PLLR_DIV5 RCC_PLLCFGR_PLLR_2 /*!< PLLR division factor = 5 */ +#define RCC_PLLR_DIV6 (RCC_PLLCFGR_PLLR_2 | RCC_PLLCFGR_PLLR_0) /*!< PLLR division factor = 6 */ +#define RCC_PLLR_DIV7 (RCC_PLLCFGR_PLLR_2 | RCC_PLLCFGR_PLLR_1) /*!< PLLR division factor = 7 */ +#define RCC_PLLR_DIV8 (RCC_PLLCFGR_PLLR_2 | RCC_PLLCFGR_PLLR_1 | RCC_PLLCFGR_PLLR_0) /*!< PLLR division factor = 8 */ +/** * @} + */ + +/** @defgroup RCC_PLL_Clock_Source PLL Clock Source + * @{ + */ +#define RCC_PLLSOURCE_NONE 0x00000000U /*!< No clock selected as PLL entry clock source */ +#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI /*!< HSI clock selected as PLL entry clock source */ +#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE /*!< HSE clock selected as PLL entry clock source */ +/** + * @} + */ + +/** @defgroup RCC_PLL_Clock_Output PLL Clock Output + * @{ + */ +#define RCC_PLLPCLK RCC_PLLCFGR_PLLPEN /*!< PLLPCLK selection from main PLL */ +#if defined(RCC_PLLQ_SUPPORT) +#define RCC_PLLQCLK RCC_PLLCFGR_PLLQEN /*!< PLLQCLK selection from main PLL */ +#endif /* RCC_PLLQ_SUPPORT */ +#define RCC_PLLRCLK RCC_PLLCFGR_PLLREN /*!< PLLRCLK selection from main PLL */ + +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Type System Clock Type + * @{ + */ +#define RCC_CLOCKTYPE_SYSCLK 0x00000001U /*!< SYSCLK to configure */ +#define RCC_CLOCKTYPE_HCLK 0x00000002U /*!< HCLK to configure */ +#define RCC_CLOCKTYPE_PCLK1 0x00000004U /*!< PCLK1 to configure */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source System Clock Source + * @{ + */ +#define RCC_SYSCLKSOURCE_HSI 0x00000000U /*!< HSI selection as system clock */ +#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_0 /*!< HSE selection as system clock */ +#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_1 /*!< PLL selection as system clock */ +#define RCC_SYSCLKSOURCE_LSI (RCC_CFGR_SW_1 | RCC_CFGR_SW_0) /*!< LSI selection as system clock */ +#define RCC_SYSCLKSOURCE_LSE RCC_CFGR_SW_2 /*!< LSE selection as system clock */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status + * @{ + */ +#define RCC_SYSCLKSOURCE_STATUS_HSI 0x00000000U /*!< HSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_0 /*!< HSE used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_1 /*!< PLL used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_LSI (RCC_CFGR_SWS_1 | RCC_CFGR_SWS_0) /*!< LSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_LSE RCC_CFGR_SWS_2 /*!< LSE used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Source AHB Clock Source + * @{ + */ +#define RCC_SYSCLK_DIV1 0x00000000U /*!< SYSCLK not divided */ +#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_3 /*!< SYSCLK divided by 2 */ +#define RCC_SYSCLK_DIV4 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 4 */ +#define RCC_SYSCLK_DIV8 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_1) /*!< SYSCLK divided by 8 */ +#define RCC_SYSCLK_DIV16 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_1 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 16 */ +#define RCC_SYSCLK_DIV64 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2) /*!< SYSCLK divided by 64 */ +#define RCC_SYSCLK_DIV128 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 128 */ +#define RCC_SYSCLK_DIV256 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1) /*!< SYSCLK divided by 256 */ +#define RCC_SYSCLK_DIV512 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 512 */ +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Source APB Clock Source + * @{ + */ +#define RCC_HCLK_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_HCLK_DIV2 RCC_CFGR_PPRE_2 /*!< HCLK divided by 2 */ +#define RCC_HCLK_DIV4 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_0) /*!< HCLK divided by 4 */ +#define RCC_HCLK_DIV8 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_1) /*!< HCLK divided by 8 */ +#define RCC_HCLK_DIV16 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_1 | RCC_CFGR_PPRE_0) /*!< HCLK divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Source RTC Clock Source + * @{ + */ +#define RCC_RTCCLKSOURCE_NONE 0x00000000U /*!< No clock configured for RTC */ +#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by 32 used as RTC clock */ +/** + * @} + */ + +/** @defgroup RCC_MCO_Index MCO Index + * @{ + */ + +/* 32 28 20 16 0 + -------------------------------- + | MCO | GPIO | GPIO | GPIO | + | Index | AF | Port | Pin | + -------------------------------*/ + +#define RCC_MCO_GPIOPORT_POS 16U +#define RCC_MCO_GPIOPORT_MASK (0xFUL << RCC_MCO_GPIOPORT_POS) +#define RCC_MCO_GPIOAF_POS 20U +#define RCC_MCO_GPIOAF_MASK (0xFFUL << RCC_MCO_GPIOAF_POS) +#define RCC_MCO_INDEX_POS 28U +#define RCC_MCO_INDEX_MASK (0x1UL << RCC_MCO_INDEX_POS) +#define RCC_MCO1_INDEX (0x0UL << RCC_MCO_INDEX_POS) /*!< MCO1 index */ +#define RCC_MCO_PA8 (RCC_MCO1_INDEX | (GPIO_AF0_MCO << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOA) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_8) +#define RCC_MCO_PA9 (RCC_MCO1_INDEX | (GPIO_AF0_MCO << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOA) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_9) +#define RCC_MCO_PD10 (RCC_MCO1_INDEX | (GPIO_AF0_MCO << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOD) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_10) /* Not defined for all stm32g0xx family lines */ +#define RCC_MCO_PF2 (RCC_MCO1_INDEX | (GPIO_AF0_MCO << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOF) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_2) /* Not defined for all stm32g0xx family lines */ +#define RCC_MCO1 RCC_MCO_PA8 + +#if defined(RCC_MCO2_SUPPORT) +#define RCC_MCO2_INDEX (0x1u << RCC_MCO_INDEX_POS) /*!< MCO2 index */ +#define RCC_MCO_PA10 (RCC_MCO2_INDEX | (GPIO_AF3_MCO2 << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOA) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_10) +#define RCC_MCO_PA15 (RCC_MCO2_INDEX | (GPIO_AF3_MCO2 << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOA) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_15) +#define RCC_MCO_PB2 (RCC_MCO2_INDEX | (GPIO_AF3_MCO2 << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOB) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_2) +#define RCC_MCO_PD7 (RCC_MCO2_INDEX | (GPIO_AF3_MCO2 << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOD) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_7) +#define RCC_MCO2 RCC_MCO_PA10 +#endif /* RCC_MCO2_SUPPORT */ + +#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 2 MCOs*/ +/** + * @} + */ + +/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source + * @{ + */ +#define RCC_MCO1SOURCE_NOCLOCK 0x00000000U /*!< MCO1 output disabled, no clock on MCO1 */ +#define RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_0 /*!< SYSCLK selection as MCO1 source */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCOSEL_1 /*!< HSI48 selection as MCO1 source */ +#endif /* RCC_HSI48_SUPPORT */ +#define RCC_MCO1SOURCE_HSI (RCC_CFGR_MCOSEL_0| RCC_CFGR_MCOSEL_1) /*!< HSI selection as MCO1 source */ +#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_2 /*!< HSE selection as MCO1 source */ +#define RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_2) /*!< PLLCLK selection as MCO1 source */ +#define RCC_MCO1SOURCE_LSI (RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSI selection as MCO1 source */ +#define RCC_MCO1SOURCE_LSE (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSE selection as MCO1 source */ +#if defined(RCC_CFGR_MCOSEL_3) +#define RCC_MCO1SOURCE_PLLPCLK RCC_CFGR_MCOSEL_3 /*!< PLLPCLK selection as MCO1 source */ +#define RCC_MCO1SOURCE_PLLQCLK (RCC_CFGR_MCOSEL_3|RCC_CFGR_MCOSEL_0) /*!< PLLQCLK selection as MCO1 source */ +#define RCC_MCO1SOURCE_RTCCLK (RCC_CFGR_MCOSEL_3|RCC_CFGR_MCOSEL_1) /*!< RTCCLK selection as MCO1 source */ +#define RCC_MCO1SOURCE_RTC_WKUP (RCC_CFGR_MCOSEL_3|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_0) /*!< RTC_Wakeup selection as MCO1 source */ +#endif /* RCC_CFGR_MCOSEL_3 */ +/** + * @} + */ + +/** @defgroup RCC_MCO1_Clock_Prescaler MCO1 Clock Prescaler + * @{ + */ +#define RCC_MCODIV_1 0x00000000U /*!< MCO not divided */ +#define RCC_MCODIV_2 RCC_CFGR_MCOPRE_0 /*!< MCO divided by 2 */ +#define RCC_MCODIV_4 RCC_CFGR_MCOPRE_1 /*!< MCO divided by 4 */ +#define RCC_MCODIV_8 (RCC_CFGR_MCOPRE_1 | RCC_CFGR_MCOPRE_0) /*!< MCO divided by 8 */ +#define RCC_MCODIV_16 RCC_CFGR_MCOPRE_2 /*!< MCO divided by 16 */ +#define RCC_MCODIV_32 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_0) /*!< MCO divided by 32 */ +#define RCC_MCODIV_64 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_1) /*!< MCO divided by 64 */ +#define RCC_MCODIV_128 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_1 | RCC_CFGR_MCOPRE_0) /*!< MCO divided by 128 */ +#if defined(RCC_CFGR_MCOPRE_3) +#define RCC_MCODIV_256 RCC_CFGR_MCOPRE_3 /*!< MCO divided by 256 */ +#define RCC_MCODIV_512 (RCC_CFGR_MCOPRE_3 | RCC_CFGR_MCOPRE_0) /*!< MCO divided by 512 */ +#define RCC_MCODIV_1024 (RCC_CFGR_MCOPRE_3 | RCC_CFGR_MCOPRE_1) /*!< MCO divided by 1024 */ +#endif /* RCC_CFGR_MCOSEL_3 */ +/** + * @} + */ + +#if defined(RCC_MCO2_SUPPORT) +/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source + * @{ + */ +#define RCC_MCO2SOURCE_NOCLOCK 0x00000000U /*!< MCO2 output disabled, no clock on MCO2 */ +#define RCC_MCO2SOURCE_SYSCLK RCC_CFGR_MCO2SEL_0 /*!< SYSCLK selection as MCO2 source */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_MCO2SOURCE_HSI48 RCC_CFGR_MCO2SEL_1 /*!< HSI48 selection as MCO2 source */ +#endif /* RCC_HSI48_SUPPORT */ +#define RCC_MCO2SOURCE_HSI (RCC_CFGR_MCO2SEL_1| RCC_CFGR_MCO2SEL_0) /*!< HSI selection as MCO2 source */ +#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2SEL_2 /*!< HSE selection as MCO2 source */ +#define RCC_MCO2SOURCE_PLLCLK (RCC_CFGR_MCO2SEL_2|RCC_CFGR_MCO2SEL_0) /*!< PLLCLK selection as MCO2 source */ +#define RCC_MCO2SOURCE_LSI (RCC_CFGR_MCO2SEL_2|RCC_CFGR_MCO2SEL_1) /*!< LSI selection as MCO2 source */ +#define RCC_MCO2SOURCE_LSE (RCC_CFGR_MCO2SEL_2|RCC_CFGR_MCO2SEL_1|RCC_CFGR_MCO2SEL_0) /*!< LSE selection as MCO2 source */ +#define RCC_MCO2SOURCE_PLLPCLK RCC_CFGR_MCO2SEL_3 /*!< PLLPCLK selection as MCO2 source */ +#define RCC_MCO2SOURCE_PLLQCLK (RCC_CFGR_MCO2SEL_3|RCC_CFGR_MCO2SEL_0) /*!< PLLQCLK selection as MCO2 source */ +#define RCC_MCO2SOURCE_RTCCLK (RCC_CFGR_MCO2SEL_3|RCC_CFGR_MCO2SEL_1) /*!< RTCCLK selection as MCO2 source */ +#define RCC_MCO2SOURCE_RTC_WKUP (RCC_CFGR_MCO2SEL_3|RCC_CFGR_MCO2SEL_1|RCC_CFGR_MCO2SEL_0) /*!< RTC_Wakeup selection as MCO2 source */ +/** + * @} + */ + +/** @defgroup RCC_MCO2_Clock_Prescaler MCO2 Clock Prescaler + * @{ + */ +#define RCC_MCO2DIV_1 0x00000000U /*!< MCO2 not divided */ +#define RCC_MCO2DIV_2 RCC_CFGR_MCO2PRE_0 /*!< MCO2 divided by 2 */ +#define RCC_MCO2DIV_4 RCC_CFGR_MCO2PRE_1 /*!< MCO2 divided by 4 */ +#define RCC_MCO2DIV_8 (RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 8 */ +#define RCC_MCO2DIV_16 RCC_CFGR_MCO2PRE_2 /*!< MCO2 divided by 16 */ +#define RCC_MCO2DIV_32 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 32 */ +#define RCC_MCO2DIV_64 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_1) /*!< MCO2 divided by 64 */ +#define RCC_MCO2DIV_128 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 128 */ +#define RCC_MCO2DIV_256 RCC_CFGR_MCO2PRE_3 /*!< MCO2 divided by 256 */ +#define RCC_MCO2DIV_512 (RCC_CFGR_MCO2PRE_3 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 512 */ +#define RCC_MCO2DIV_1024 (RCC_CFGR_MCO2PRE_3 | RCC_CFGR_MCO2PRE_1) /*!< MCO2 divided by 1024 */ +/** + * @} + */ +#endif /* RCC_MCO2_SUPPORT */ + +/** @defgroup RCC_Interrupt Interrupts + * @{ + */ +#define RCC_IT_LSIRDY RCC_CIFR_LSIRDYF /*!< LSI Ready Interrupt flag */ +#define RCC_IT_LSERDY RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt flag */ +#define RCC_IT_HSIRDY RCC_CIFR_HSIRDYF /*!< HSI Ready Interrupt flag */ +#define RCC_IT_HSERDY RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */ +#define RCC_IT_PLLRDY RCC_CIFR_PLLRDYF /*!< PLL Ready Interrupt flag */ +#define RCC_IT_CSS RCC_CIFR_CSSF /*!< HSE Clock Security System Interrupt flag */ +#define RCC_IT_LSECSS RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt flag */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_IT_HSI48RDY RCC_CIFR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_Flag Flags + * Elements values convention: XXXYYYYYb + * - YYYYY : Flag position in the register + * - XXX : Register index + * - 001: CR register + * - 010: BDCR register + * - 011: CSR register + * @{ + */ +/* Flags in the CR register */ +#define RCC_FLAG_HSIRDY ((CR_REG_INDEX << 5U) | RCC_CR_HSIRDY_Pos) /*!< HSI Ready flag */ +#define RCC_FLAG_HSERDY ((CR_REG_INDEX << 5U) | RCC_CR_HSERDY_Pos) /*!< HSE Ready flag */ +#define RCC_FLAG_PLLRDY ((CR_REG_INDEX << 5U) | RCC_CR_PLLRDY_Pos) /*!< PLL Ready flag */ + +#if defined(RCC_HSI48_SUPPORT) +/* Flags in the CR register */ +#define RCC_FLAG_HSI48RDY ((CR_REG_INDEX << 5U) | RCC_CR_HSI48RDY_Pos) /*!< HSI48 Ready flag */ +#endif /* RCC_HSI48_SUPPORT */ + +/* Flags in the BDCR register */ +#define RCC_FLAG_LSERDY ((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSERDY_Pos) /*!< LSE Ready flag */ +#define RCC_FLAG_LSECSSD ((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSECSSD_Pos) /*!< LSE Clock Security System Interrupt flag */ + +/* Flags in the CSR register */ +#define RCC_FLAG_LSIRDY ((CSR_REG_INDEX << 5U) | RCC_CSR_LSIRDY_Pos) /*!< LSI Ready flag */ +#define RCC_FLAG_OBLRST ((CSR_REG_INDEX << 5U) | RCC_CSR_OBLRSTF_Pos) /*!< Option Byte Loader reset flag */ +#define RCC_FLAG_PINRST ((CSR_REG_INDEX << 5U) | RCC_CSR_PINRSTF_Pos) /*!< PIN reset flag */ +#define RCC_FLAG_PWRRST ((CSR_REG_INDEX << 5U) | RCC_CSR_PWRRSTF_Pos) /*!< BOR or POR/PDR reset flag */ +#define RCC_FLAG_SFTRST ((CSR_REG_INDEX << 5U) | RCC_CSR_SFTRSTF_Pos) /*!< Software Reset flag */ +#define RCC_FLAG_IWDGRST ((CSR_REG_INDEX << 5U) | RCC_CSR_IWDGRSTF_Pos) /*!< Independent Watchdog reset flag */ +#define RCC_FLAG_WWDGRST ((CSR_REG_INDEX << 5U) | RCC_CSR_WWDGRSTF_Pos) /*!< Window watchdog reset flag */ +#define RCC_FLAG_LPWRRST ((CSR_REG_INDEX << 5U) | RCC_CSR_LPWRRSTF_Pos) /*!< Low-Power reset flag */ + +/** + * @} + */ + +/** @defgroup RCC_LSEDrive_Config LSE Drive Configuration + * @{ + */ +#define RCC_LSEDRIVE_LOW 0x00000000U /*!< LSE low drive capability */ +#define RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_0 /*!< LSE medium low drive capability */ +#define RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_1 /*!< LSE medium high drive capability */ +#define RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< LSE high drive capability */ +/** + * @} + */ + +/** @defgroup RCC_Reset_Flag Reset Flag + * @{ + */ +#define RCC_RESET_FLAG_OBL RCC_CSR_OBLRSTF /*!< Option Byte Loader reset flag */ +#define RCC_RESET_FLAG_PIN RCC_CSR_PINRSTF /*!< PIN reset flag */ +#define RCC_RESET_FLAG_PWR RCC_CSR_PWRRSTF /*!< BOR or POR/PDR reset flag */ +#define RCC_RESET_FLAG_SW RCC_CSR_SFTRSTF /*!< Software Reset flag */ +#define RCC_RESET_FLAG_IWDG RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */ +#define RCC_RESET_FLAG_WWDG RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */ +#define RCC_RESET_FLAG_LPWR RCC_CSR_LPWRRSTF /*!< Low power reset flag */ +#define RCC_RESET_FLAG_ALL (RCC_RESET_FLAG_OBL | RCC_RESET_FLAG_PIN | RCC_RESET_FLAG_PWR | \ + RCC_RESET_FLAG_SW | RCC_RESET_FLAG_IWDG | RCC_RESET_FLAG_WWDG | \ + RCC_RESET_FLAG_LPWR) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_AHB_Peripheral_Clock_Enable_Disable AHB Peripheral Clock Enable Disable + * @brief Enable or disable the AHB peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(DMA2) +#define __HAL_RCC_DMA2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#endif /* DMA2 */ + + +#define __HAL_RCC_FLASH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(RNG) +#define __HAL_RCC_RNG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* RNG */ + +#if defined(AES) +#define __HAL_RCC_AES_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_AESEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_AESEN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* AES */ + +#define __HAL_RCC_DMA1_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN) +#if defined(DMA2) +#define __HAL_RCC_DMA2_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN) +#define __HAL_RCC_CRC_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN) +#if defined(RNG) +#define __HAL_RCC_RNG_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_AESEN) +#endif /* AES */ +/** + * @} + */ + +/** @defgroup RCC_IOPORT_Clock_Enable_Disable IOPORT Clock Enable Disable + * @brief Enable or disable the IO Ports clock. + * @note After reset, the IO ports clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* GPIOE */ + +#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOA_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN) +#define __HAL_RCC_GPIOB_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN) +#define __HAL_RCC_GPIOC_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN) +#define __HAL_RCC_GPIOD_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable + * @brief Enable or disable the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#if defined(TIM2) +#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM2EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* TIM2 */ + +#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(TIM4) +#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM4EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM4EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* TIM4 */ + +#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM6EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM6EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM7EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM7EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_CRSEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_CRSEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* CRS */ + +#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_WWDGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_WWDGEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_SPI2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI2EN); \ + UNUSED(tmpreg); \ + } while(0U) +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_SPI3EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI3EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_USART3EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART3EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_USART4EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART4EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(USART5) +#define __HAL_RCC_USART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_USART5EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART5EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* USART5 */ + +#if defined(USART6) +#define __HAL_RCC_USART6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_USART6EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART6EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* USART6 */ + +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_LPUART1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART1EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* LPUART1 */ + +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_LPUART2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART2EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* LPUART2 */ + +#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_I2C2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_I2C2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C2EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(I2C3) +#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_I2C3EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C3EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* I2C3 */ + +#if defined(CEC) +#define __HAL_RCC_CEC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_CECEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_CECEN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* CEC */ + +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_UCPD1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD1EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* UCPD1 */ + +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_UCPD2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD2EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* UCPD2 */ + +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_USBEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USBEN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ + +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_FDCANEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_FDCANEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* FDCAN1 || FDCAN2 */ + +#define __HAL_RCC_DBGMCU_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_PWR_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_PWREN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_PWREN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_DAC1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_DAC1EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* DAC1 */ + +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM2EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* LPTIM2 */ + +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM1EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* LPTIM1 */ + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable + * @brief Enable or disable the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(TIM15) +#define __HAL_RCC_TIM15_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM15EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM15EN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* TIM15 */ + +#define __HAL_RCC_TIM16_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM17_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_ADC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(TIM2) +#define __HAL_RCC_TIM2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_TIM2EN) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN) +#if defined(TIM4) +#define __HAL_RCC_TIM4_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_TIM4EN) +#endif /* TIM4 */ +#if defined(TIM6) +#define __HAL_RCC_TIM6_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_TIM6EN) +#endif /* TIM6 */ +#if defined(TIM7) +#define __HAL_RCC_TIM7_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_TIM7EN) +#endif /* TIM7 */ +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_CRSEN); +#endif /* CRS */ +#define __HAL_RCC_RTCAPB_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN) +#define __HAL_RCC_SPI2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_SPI2EN) +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_SPI3EN) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN) +#if defined(USART3) +#define __HAL_RCC_USART3_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_USART3EN) +#endif /* USART3 */ +#if defined(USART4) +#define __HAL_RCC_USART4_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_USART4EN) +#endif /* USART4 */ +#if defined(USART5) +#define __HAL_RCC_USART5_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_USART5EN) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_USART6EN) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_LPUART1EN) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_LPUART2EN) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN) +#define __HAL_RCC_I2C2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_I2C2EN) +#if defined(I2C3) +#define __HAL_RCC_I2C3_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_I2C3EN) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_CECEN) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_UCPD1EN) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_UCPD2EN) +#endif /* UCPD2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_USBEN) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_FDCANEN) +#endif /* FDCAN1 || FDCAN2 */ +#define __HAL_RCC_DBGMCU_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN) +#define __HAL_RCC_PWR_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_PWREN) +#if defined(DAC1) +#define __HAL_RCC_DAC1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_DAC1EN) +#endif /* DAC1 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM1EN) +#endif /* LPTIM1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM2EN) +#endif /* LPTIM2 */ +#define __HAL_RCC_SYSCFG_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN) +#define __HAL_RCC_TIM1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN) +#define __HAL_RCC_SPI1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN) +#define __HAL_RCC_USART1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN) +#define __HAL_RCC_TIM14_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN) +#if defined(TIM15) +#define __HAL_RCC_TIM15_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_TIM15EN) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN) +#define __HAL_RCC_TIM17_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN) +#define __HAL_RCC_ADC_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN) + +/** + * @} + */ + +/** @defgroup RCC_AHB_Peripheral_Clock_Enabled_Disabled_Status AHB Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_DMA1_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN) != RESET) +#if defined(DMA2) +#define __HAL_RCC_DMA2_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN) != RESET) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN) != RESET) +#define __HAL_RCC_CRC_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN) != RESET) +#if defined(RNG) +#define __HAL_RCC_RNG_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN) != RESET) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_AESEN) != RESET) +#endif /* AES */ + +#define __HAL_RCC_DMA1_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN) == RESET) +#if defined(DMA2) +#define __HAL_RCC_DMA2_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN) == RESET) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN) == RESET) +#define __HAL_RCC_CRC_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN) == RESET) +#if defined(RNG) +#define __HAL_RCC_RNG_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN) == RESET) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_AESEN) == RESET) +#endif /* AES */ +/** + * @} + */ + +/** @defgroup RCC_IOPORT_Clock_Enabled_Disabled_Status IOPORT Clock Enabled or Disabled Status + * @brief Check whether the IO Port clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN) != RESET) +#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN) != RESET) +#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN) != RESET) +#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN) != RESET) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN) != RESET) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN) != RESET) + + +#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN) == RESET) +#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN) == RESET) +#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN) == RESET) +#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN) == RESET) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN) == RESET) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enabled_Disabled_Status APB1 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB1 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(TIM2) +#define __HAL_RCC_TIM2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM2EN) != 0U) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN) != 0U) +#if defined(TIM4) +#define __HAL_RCC_TIM4_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM4EN) != 0U) +#endif /* TIM4 */ +#define __HAL_RCC_TIM6_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM6EN) != 0U) +#define __HAL_RCC_TIM7_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM7EN) != 0U) +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_CRSEN) != 0U) +#endif /* CRS */ +#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN) != 0U) +#define __HAL_RCC_WWDG_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_WWDGEN) != 0U) +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_FDCANEN) != 0U) +#endif /* FDCAN1 || FDCAN2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USBEN) != 0U) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#define __HAL_RCC_SPI2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI2EN) != 0U) +#if defined(SPI3) +#define __HAL_RCC_SPI3_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI3EN) != 0U) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN) != 0U) +#define __HAL_RCC_USART3_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART3EN) != 0U) +#define __HAL_RCC_USART4_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART4EN) != 0U) +#if defined(USART5) +#define __HAL_RCC_USART5_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART5EN) != 0U) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART6EN) != 0U) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART1EN)!= 0U) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART2EN)!= 0U) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN) != 0U) +#define __HAL_RCC_I2C2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C2EN) != 0U) +#if defined(I2C3) +#define __HAL_RCC_I2C3_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C3EN) != 0U) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_CECEN) != 0U) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD1EN) != 0U) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD2EN) != 0U) +#endif /* UCPD2 */ +#define __HAL_RCC_DBGMCU_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN) != 0U) +#define __HAL_RCC_PWR_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_PWREN) != 0U) +#if defined(DAC1) +#define __HAL_RCC_DAC1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_DAC1EN) != 0U) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM2EN) != 0U) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM1EN) != 0U) +#endif /* LPTIM1 */ +#if defined(TIM2) +#define __HAL_RCC_TIM2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM2EN) == 0U) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN) == 0U) +#if defined(TIM4) +#define __HAL_RCC_TIM4_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM4EN) == 0U) +#endif /* TIM4 */ +#define __HAL_RCC_TIM6_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM6EN) == 0U) +#define __HAL_RCC_TIM7_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM7EN) == 0U) +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_CRSEN) == 0U) +#endif /* CRS */ +#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN) == 0U) +#define __HAL_RCC_WWDG_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_WWDGEN) == 0U) +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_FDCANEN) == 0U) +#endif /* FDCAN1 || FDCAN2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USBEN) == 0U) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#define __HAL_RCC_SPI2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI2EN) == 0U) +#if defined(SPI3) +#define __HAL_RCC_SPI3_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI3EN) == 0U) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN) == 0U) +#define __HAL_RCC_USART3_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART3EN) == 0U) +#define __HAL_RCC_USART4_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART4EN) == 0U) +#if defined(USART5) +#define __HAL_RCC_USART5_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART5EN) == 0U) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART6EN) == 0U) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART1EN)== 0U) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART2EN)== 0U) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN) == 0U) +#define __HAL_RCC_I2C2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C2EN) == 0U) +#if defined(I2C3) +#define __HAL_RCC_I2C3_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C3EN) == 0U) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_CECEN) == 0U) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD1EN) == 0U) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD2EN) == 0U) +#endif /* UCPD2 */ +#define __HAL_RCC_DBGMCU_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN) == 0U) +#define __HAL_RCC_PWR_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_PWREN) == 0U) +#if defined(DAC1) +#define __HAL_RCC_DAC1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_DAC1EN) == 0U) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM2EN) == 0U) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM1EN) == 0U) +#endif /* LPTIM1 */ + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Enabled_Disabled_Status APB2 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB2 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN) != 0U) +#define __HAL_RCC_TIM1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN) != 0U) +#define __HAL_RCC_SPI1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN) != 0U) +#define __HAL_RCC_USART1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN) != 0U) +#define __HAL_RCC_TIM14_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN) != 0U) +#if defined(TIM15) +#define __HAL_RCC_TIM15_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM15EN) != 0U) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN) != 0U) +#define __HAL_RCC_TIM17_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN) != 0U) +#define __HAL_RCC_ADC_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN) != 0U) + +#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN) == 0U) +#define __HAL_RCC_TIM1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN) == 0U) +#define __HAL_RCC_SPI1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN) == 0U) +#define __HAL_RCC_USART1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN) == 0U) +#define __HAL_RCC_TIM14_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN) == 0U) +#if defined(TIM15) +#define __HAL_RCC_TIM15_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM15EN) == 0U) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN) == 0U) +#define __HAL_RCC_TIM17_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN) == 0U) +#define __HAL_RCC_ADC_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN) == 0U) + +/** + * @} + */ + +/** @defgroup RCC_AHB_Force_Release_Reset AHB Peripheral Force Release Reset + * @brief Force or release AHB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB_FORCE_RESET() WRITE_REG(RCC->AHBRSTR, 0xFFFFFFFFU) +#define __HAL_RCC_DMA1_FORCE_RESET() SET_BIT(RCC->AHBRSTR, RCC_AHBRSTR_DMA1RST) +#if defined(DMA2) +#define __HAL_RCC_DMA2_FORCE_RESET() SET_BIT(RCC->AHBRSTR, RCC_AHBRSTR_DMA2RST) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_FORCE_RESET() SET_BIT(RCC->AHBRSTR, RCC_AHBRSTR_FLASHRST) +#define __HAL_RCC_CRC_FORCE_RESET() SET_BIT(RCC->AHBRSTR, RCC_AHBRSTR_CRCRST) +#if defined(RNG) +#define __HAL_RCC_RNG_FORCE_RESET() SET_BIT(RCC->AHBRSTR, RCC_AHBRSTR_RNGRST) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_FORCE_RESET() SET_BIT(RCC->AHBRSTR, RCC_AHBRSTR_AESRST) +#endif /* AES */ + +#define __HAL_RCC_AHB_RELEASE_RESET() WRITE_REG(RCC->AHBRSTR, 0x00000000U) +#define __HAL_RCC_DMA1_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, RCC_AHBRSTR_DMA1RST) +#if defined(DMA2) +#define __HAL_RCC_DMA2_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, RCC_AHBRSTR_DMA2RST) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, RCC_AHBRSTR_FLASHRST) +#define __HAL_RCC_CRC_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, RCC_AHBRSTR_CRCRST) +#if defined(RNG) +#define __HAL_RCC_RNG_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, RCC_AHBRSTR_RNGRST) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, RCC_AHBRSTR_AESRST) +#endif /* AES */ +/** + * @} + */ + +/** @defgroup RCC_IOPORT_Force_Release_Reset IOPORT Force Release Reset + * @brief Force or release IO Port reset. + * @{ + */ +#define __HAL_RCC_IOP_FORCE_RESET() WRITE_REG(RCC->IOPRSTR, 0xFFFFFFFFU) +#define __HAL_RCC_GPIOA_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOARST) +#define __HAL_RCC_GPIOB_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOBRST) +#define __HAL_RCC_GPIOC_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOCRST) +#define __HAL_RCC_GPIOD_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIODRST) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOERST) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOFRST) + +#define __HAL_RCC_IOP_RELEASE_RESET() WRITE_REG(RCC->IOPRSTR, 0x00000000U) +#define __HAL_RCC_GPIOA_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOARST) +#define __HAL_RCC_GPIOB_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOBRST) +#define __HAL_RCC_GPIOC_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOCRST) +#define __HAL_RCC_GPIOD_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIODRST) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOERST) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOFRST) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Force_Release_Reset APB1 Peripheral Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB1_FORCE_RESET() WRITE_REG(RCC->APBRSTR1, 0xFFFFFFFFU) + +#if defined(TIM2) +#define __HAL_RCC_TIM2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM2RST) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM3RST) +#if defined(TIM4) +#define __HAL_RCC_TIM4_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM4RST) +#endif /* TIM4 */ +#define __HAL_RCC_TIM6_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM6RST) +#define __HAL_RCC_TIM7_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM7RST) +#if defined(CRS) +#define __HAL_RCC_CRS_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_CRSRST) +#endif /* CRS */ +#define __HAL_RCC_SPI2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_SPI2RST) +#if defined(SPI3) +#define __HAL_RCC_SPI3_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_SPI3RST) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART2RST) +#define __HAL_RCC_USART3_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART3RST) +#define __HAL_RCC_USART4_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART4RST) +#if defined(USART5) +#define __HAL_RCC_USART5_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART5RST) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART6RST) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPUART1RST) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPUART2RST) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_I2C1RST) +#define __HAL_RCC_I2C2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_I2C2RST) +#if defined(I2C3) +#define __HAL_RCC_I2C3_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_I2C3RST) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_CECRST) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_UCPD1RST) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_UCPD2RST) +#endif /* UCPD2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USBRST) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_FDCANRST) +#endif /* FDCAN1 || FDCAN2 */ +#define __HAL_RCC_DBGMCU_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_DBGRST) +#define __HAL_RCC_PWR_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_PWRRST) +#if defined(DAC1) +#define __HAL_RCC_DAC1_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_DAC1RST) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPTIM2RST) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPTIM1RST) +#endif /* LPTIM1 */ +#define __HAL_RCC_APB1_RELEASE_RESET() WRITE_REG(RCC->APBRSTR1, 0x00000000U) +#if defined(TIM2) +#define __HAL_RCC_TIM2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM2RST) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM3RST) +#if defined(TIM4) +#define __HAL_RCC_TIM4_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM4RST) +#endif /* TIM4 */ +#define __HAL_RCC_TIM6_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM6RST) +#define __HAL_RCC_TIM7_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM7RST) +#if defined(CRS) +#define __HAL_RCC_CRS_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_CRSRST) +#endif /* CRS */ +#define __HAL_RCC_SPI2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_SPI2RST) +#if defined(SPI3) +#define __HAL_RCC_SPI3_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_SPI3RST) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART2RST) +#define __HAL_RCC_USART3_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART3RST) +#define __HAL_RCC_USART4_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART4RST) +#if defined(USART5) +#define __HAL_RCC_USART5_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART5RST) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART6RST) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPUART1RST) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPUART2RST) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_I2C1RST) +#define __HAL_RCC_I2C2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_I2C2RST) +#if defined(I2C3) +#define __HAL_RCC_I2C3_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_I2C3RST) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_CECRST) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_UCPD1RST) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_UCPD2RST) +#endif /* UCPD2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USBRST) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_FDCANRST) +#endif /* FDCAN1 || FDCAN2 */ +#define __HAL_RCC_DBGMCU_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_DBGRST) +#define __HAL_RCC_PWR_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_PWRRST) +#if defined(DAC1) +#define __HAL_RCC_DAC1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_DAC1RST) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPTIM2RST) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_LPTIM1RST) +#endif /* LPTIM1 */ +/** + * @} + */ + +/** @defgroup RCC_APB2_Force_Release_Reset APB2 Peripheral Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB2_FORCE_RESET() WRITE_REG(RCC->APBRSTR2, 0xFFFFFFFFU) +#define __HAL_RCC_SYSCFG_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_SYSCFGRST) +#define __HAL_RCC_TIM1_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM1RST) +#define __HAL_RCC_SPI1_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_SPI1RST) +#define __HAL_RCC_USART1_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_USART1RST) +#define __HAL_RCC_TIM14_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM14RST) +#if defined(TIM15) +#define __HAL_RCC_TIM15_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM15RST) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM16RST) +#define __HAL_RCC_TIM17_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM17RST) +#define __HAL_RCC_ADC_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_ADCRST) + +#define __HAL_RCC_APB2_RELEASE_RESET() WRITE_REG(RCC->APBRSTR2, 0x00U) +#define __HAL_RCC_SYSCFG_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_SYSCFGRST) +#define __HAL_RCC_TIM1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM1RST) +#define __HAL_RCC_SPI1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_SPI1RST) +#define __HAL_RCC_USART1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_USART1RST) +#define __HAL_RCC_TIM14_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM14RST) +#if defined(TIM15) +#define __HAL_RCC_TIM15_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM15RST) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM16RST) +#define __HAL_RCC_TIM17_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM17RST) +#define __HAL_RCC_ADC_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_ADCRST) + +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Sleep_Enable_Disable AHB Peripherals Clock Sleep Enable Disable + * @brief Enable or disable the AHB peripherals clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA1SMEN) +#if defined(DMA2) +#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA2SMEN) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_FLASHSMEN) +#define __HAL_RCC_SRAM_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_SRAMSMEN) +#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_CRCSMEN) +#if defined(RNG) +#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_RNGSMEN) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_AESSMEN) +#endif /* AES */ +#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA1SMEN) +#if defined(DMA2) +#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA2SMEN) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_FLASHSMEN) +#define __HAL_RCC_SRAM_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_SRAMSMEN) +#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_CRCSMEN) +#if defined(RNG) +#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_RNGSMEN) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_AESSMEN) +#endif /* AES */ + +/** + * @} + */ + +/** @defgroup RCC_IOPORT_Clock_Sleep_Enable_Disable IOPORT Clock Sleep Enable Disable + * @brief Enable or disable the IOPORT clock during Low Power (Sleep) mode. + * @note IOPORT clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOASMEN) +#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOBSMEN) +#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOCSMEN) +#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIODSMEN) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOESMEN) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOFSMEN) + +#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOASMEN) +#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOBSMEN) +#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOCSMEN) +#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIODSMEN) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOESMEN) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOFSMEN) +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable APB1 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#if defined(TIM2) +#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM2SMEN) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM3SMEN) +#if defined(TIM4) +#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM4SMEN) +#endif /* TIM4 */ +#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM6SMEN) +#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM7SMEN) +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CRSSMEN) +#endif /* CRS */ +#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_RTCAPBSMEN) +#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_WWDGSMEN) +#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI2SMEN) +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI3SMEN) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART2SMEN) +#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART3SMEN) +#define __HAL_RCC_USART4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART4SMEN) +#if defined(USART5) +#define __HAL_RCC_USART5_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART5SMEN) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART6SMEN) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART1SMEN) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART2SMEN) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C1SMEN) +#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C2SMEN) +#if defined(I2C3) +#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C3SMEN) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CECSMEN) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD1SMEN) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD2SMEN) +#endif /* UCPD2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USBSMEN) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_FDCANSMEN) +#endif /* FDCAN1 || FDCAN2 */ +#define __HAL_RCC_DBGMCU_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DBGSMEN) +#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_PWRSMEN) +#if defined(DAC1) +#define __HAL_RCC_DAC1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DAC1SMEN) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM2SMEN) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM1SMEN) +#endif /* LPTIM1 */ +#if defined(TIM2) +#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM2SMEN) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM3SMEN) +#if defined(TIM4) +#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM4SMEN) +#endif /* TIM4 */ +#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM6SMEN) +#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM7SMEN) +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CRSSMEN) +#endif /* CRS */ +#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_RTCAPBSMEN) +#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_WWDGSMEN) +#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI2SMEN) +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI3SMEN) +#endif /* TIM2 */ +#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART2SMEN) +#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART3SMEN) +#define __HAL_RCC_USART4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART4SMEN) +#if defined(USART5) +#define __HAL_RCC_USART5_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART5SMEN) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART6SMEN) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART1SMEN) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART2SMEN) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C1SMEN) +#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C2SMEN) +#if defined(I2C3) +#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C3SMEN) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CECSMEN) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD1SMEN) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD2SMEN) +#endif /* UCPD2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USBSMEN) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_FDCANSMEN) +#endif /* FDCAN1) || FDCAN2 */ +#define __HAL_RCC_DBGMCU_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DBGSMEN) +#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_PWRSMEN) +#if defined(DAC1) +#define __HAL_RCC_DAC1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DAC1SMEN) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM2SMEN) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM1SMEN) +#endif /* LPTIM1 */ +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable APB2 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SYSCFGSMEN) +#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM1SMEN) +#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SPI1SMEN) +#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_USART1SMEN) +#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM14SMEN) +#if defined(TIM15) +#define __HAL_RCC_TIM15_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM15SMEN) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM16SMEN) +#define __HAL_RCC_TIM17_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM17SMEN) +#define __HAL_RCC_ADC_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_ADCSMEN) + +#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SYSCFGSMEN) +#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM1SMEN) +#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SPI1SMEN) +#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_USART1SMEN) +#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM14SMEN) +#if defined(TIM15) +#define __HAL_RCC_TIM15_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM15SMEN) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM16SMEN) +#define __HAL_RCC_TIM17_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM17SMEN) +#define __HAL_RCC_ADC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_ADCSMEN) + +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Sleep_Enabled_Disabled_Status AHB Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the AHB peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_DMA1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA1SMEN) != RESET) +#if defined(DMA2) +#define __HAL_RCC_DMA2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA2SMEN) != RESET) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_FLASHSMEN)!= RESET) +#define __HAL_RCC_SRAM_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_SRAMSMEN) != RESET) +#define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_CRCSMEN) != RESET) +#if defined(RNG) +#define __HAL_RCC_RNG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_RNGSMEN) != RESET) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_AESSMEN) != RESET) +#endif /* AES */ +#define __HAL_RCC_DMA1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA1SMEN) == RESET) +#if defined(DMA2) +#define __HAL_RCC_DMA2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA2SMEN) == RESET) +#endif /* DMA2 */ +#define __HAL_RCC_FLASH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_FLASHSMEN) == RESET) +#define __HAL_RCC_SRAM_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_SRAMSMEN) == RESET) +#define __HAL_RCC_CRC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_CRCSMEN) == RESET) +#if defined(RNG) +#define __HAL_RCC_RNG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_RNGSMEN) == RESET) +#endif /* RNG */ +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_AESSMEN) == RESET) +#endif /* AES */ + +/** + * @} + */ + +/** @defgroup RCC_IOPORT_Clock_Sleep_Enabled_Disabled_Status IOPORT Clock Sleep Enabled or Disabled Status + * @brief Check whether the IOPORT clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + + +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOASMEN)!= RESET) +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOBSMEN)!= RESET) +#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOCSMEN)!= RESET) +#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIODSMEN)!= RESET) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOESMEN)!= RESET) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOFSMEN)!= RESET) + + + +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOASMEN) == RESET) +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOBSMEN) == RESET) +#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOCSMEN) == RESET) +#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIODSMEN) == RESET) +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOESMEN) == RESET) +#endif /* GPIOE */ +#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOFSMEN) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Sleep_Enabled_Disabled_Status APB1 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the APB1 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#if defined(TIM2) +#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM2SMEN) != RESET) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM3SMEN) != RESET) +#if defined(TIM4) +#define __HAL_RCC_TIM4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM4SMEN) != RESET) +#endif /* TIM4 */ +#if defined(TIM6) +#define __HAL_RCC_TIM6_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM6SMEN) != RESET) +#endif /* TIM6 */ +#if defined(TIM7) +#define __HAL_RCC_TIM7_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM7SMEN) != RESET) +#endif /* TIM7 */ +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CRSSMEN) != RESET) +#endif /* CRS */ +#define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_RTCAPBSMEN) != RESET) +#define __HAL_RCC_WWDG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_WWDGSMEN) != RESET) +#define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI2SMEN) != RESET) +#if defined(SPI3) +#define __HAL_RCC_SPI3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI3SMEN) != RESET) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART2SMEN) != RESET) +#if defined(USART3) +#define __HAL_RCC_USART3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART3SMEN) != RESET) +#endif /* USART3 */ +#if defined(USART4) +#define __HAL_RCC_USART4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART4SMEN) != RESET) +#endif /* USART4 */ +#if defined(USART5) +#define __HAL_RCC_USART5_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART5SMEN) != RESET) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART6SMEN) != RESET) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART1SMEN)!= RESET) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART2SMEN)!= RESET) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C1SMEN) != RESET) +#define __HAL_RCC_I2C2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C2SMEN) != RESET) +#if defined(I2C3) +#define __HAL_RCC_I2C3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C3SMEN) != RESET) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CECSMEN) != RESET) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD1SMEN) != RESET) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD2SMEN) != RESET) +#endif /* UCPD2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USBSMEN) != RESET) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_FDCANSMEN) != RESET) +#endif /* FDCAN1 || FDCAN2 */ +#define __HAL_RCC_DBGMCU_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DBGSMEN) != RESET) +#define __HAL_RCC_PWR_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_PWRSMEN) != RESET) +#if defined(DAC1) +#define __HAL_RCC_DAC1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DAC1SMEN) != RESET) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM2SMEN) != RESET) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM1SMEN) != RESET) +#endif /* LPTIM1 */ +#if defined(TIM2) +#define __HAL_RCC_TIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM2SMEN) == RESET) +#endif /* TIM2 */ +#define __HAL_RCC_TIM3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM3SMEN) == RESET) +#if defined(TIM4) +#define __HAL_RCC_TIM4_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM4SMEN) == RESET) +#endif /* TIM4 */ +#if defined(TIM6) +#define __HAL_RCC_TIM6_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM6SMEN) == RESET) +#endif /* TIM6 */ +#if defined(TIM7) +#define __HAL_RCC_TIM7_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM7SMEN) == RESET) +#endif /* TIM7 */ +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CRSSMEN) == RESET) +#endif /* CRS */ +#define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_RTCAPBSMEN) == RESET) +#define __HAL_RCC_WWDG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_WWDGSMEN) == RESET) +#define __HAL_RCC_SPI2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI2SMEN) == RESET) +#if defined(SPI3) +#define __HAL_RCC_SPI3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_SPI3SMEN) == RESET) +#endif /* SPI3 */ +#define __HAL_RCC_USART2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART2SMEN) == RESET) +#if defined(USART3) +#define __HAL_RCC_USART3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART3SMEN) == RESET) +#endif /* USART3 */ +#if defined(USART4) +#define __HAL_RCC_USART4_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART4SMEN) == RESET) +#endif /* USART4 */ +#if defined(USART5) +#define __HAL_RCC_USART5_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART5SMEN) == RESET) +#endif /* USART5 */ +#if defined(USART6) +#define __HAL_RCC_USART6_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART6SMEN) == RESET) +#endif /* USART6 */ +#if defined(LPUART1) +#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART1SMEN)== RESET) +#endif /* LPUART1 */ +#if defined(LPUART2) +#define __HAL_RCC_LPUART2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPUART2SMEN)== RESET) +#endif /* LPUART2 */ +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C1SMEN) == RESET) +#define __HAL_RCC_I2C2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C2SMEN) == RESET) +#if defined(I2C3) +#define __HAL_RCC_I2C3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C3SMEN) == RESET) +#endif /* I2C3 */ +#if defined(CEC) +#define __HAL_RCC_CEC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_CECSMEN) == RESET) +#endif /* CEC */ +#if defined(UCPD1) +#define __HAL_RCC_UCPD1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD1SMEN) == RESET) +#endif /* UCPD1 */ +#if defined(UCPD2) +#define __HAL_RCC_UCPD2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_UCPD2SMEN) == RESET) +#endif /* UCPD2 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define __HAL_RCC_USB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USBSMEN) == RESET) +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +#if defined(FDCAN1) || defined(FDCAN2) +#define __HAL_RCC_FDCAN_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_FDCANSMEN) == RESET) +#endif /* FDCAN1 || FDCAN2 */ +#define __HAL_RCC_DBGMCU_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DBGSMEN) == RESET) +#define __HAL_RCC_PWR_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_PWRSMEN) == RESET) +#if defined(DAC1) +#define __HAL_RCC_DAC1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DAC1SMEN) == RESET) +#endif /* DAC1 */ +#if defined(LPTIM2) +#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM2SMEN) == RESET) +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_LPTIM1SMEN) == RESET) +#endif /* LPTIM1 */ + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Sleep_Enabled_Disabled_Status APB2 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the APB2 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SYSCFGSMEN) != RESET) +#define __HAL_RCC_TIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM1SMEN) != RESET) +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SPI1SMEN) != RESET) +#define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_USART1SMEN) != RESET) +#define __HAL_RCC_TIM14_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM14SMEN) != RESET) +#if defined(TIM15) +#define __HAL_RCC_TIM15_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM15SMEN) != RESET) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM16SMEN) != RESET) +#define __HAL_RCC_TIM17_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM17SMEN) != RESET) +#define __HAL_RCC_ADC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_ADCSMEN) != RESET) + + +#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SYSCFGSMEN) == RESET) +#define __HAL_RCC_TIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM1SMEN) == RESET) +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SPI1SMEN) == RESET) +#define __HAL_RCC_USART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_USART1SMEN) == RESET) +#define __HAL_RCC_TIM14_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM14SMEN) == RESET) +#if defined(TIM15) +#define __HAL_RCC_TIM15_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM15SMEN) == RESET) +#endif /* TIM15 */ +#define __HAL_RCC_TIM16_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM16SMEN) == RESET) +#define __HAL_RCC_TIM17_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM17SMEN) == RESET) +#define __HAL_RCC_ADC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_ADCSMEN) == RESET) + + +/** + * @} + */ + +/** @defgroup RCC_Backup_Domain_Reset RCC Backup Domain Reset + * @{ + */ + +/** @brief Macros to force or release the Backup domain reset. + * @note This function resets the RTC peripheral (including the backup registers) + * and the RTC clock source selection in RCC_CSR register. + * @note The BKPSRAM is not affected by this reset. + * @retval None + */ +#define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->BDCR, RCC_BDCR_BDRST) + +#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST) + +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration + * @{ + */ + +/** @brief Macros to enable or disable the RTC clock. + * @note As the RTC is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the RTC + * (to be done once after reset). + * @note These macros must be used after the RTC clock source was selected. + * @retval None + */ +#define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN) + +#define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN) + +/** + * @} + */ + +/** @defgroup RCC_Clock_Configuration RCC Clock Configuration + * @{ + */ + +/** @brief Macros to enable the Internal High Speed oscillator (HSI). + * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. + * It is used (enabled by hardware) as system clock source after startup + * from Reset, wakeup from STOP and STANDBY mode, or in case of failure + * of the HSE used directly or indirectly as system clock (if the Clock + * Security System CSS is enabled). + * @note After enabling the HSI, the application software should wait on HSIRDY + * flag to be set indicating that HSI clock is stable and can be used as + * system clock source. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION) + +/** @brief Macros to disable the Internal High Speed oscillator (HSI). + * @note HSI can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI. + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + * @retval None + */ +#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION) + +/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * @param __HSICALIBRATIONVALUE__ specifies the calibration trimming value + * (default is RCC_HSICALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 127. + * @retval None + */ +#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICALIBRATIONVALUE__) \ + MODIFY_REG(RCC->ICSCR, RCC_ICSCR_HSITRIM, (uint32_t)(__HSICALIBRATIONVALUE__) << RCC_ICSCR_HSITRIM_Pos) + +/** + * @brief Macros to enable or disable the force of the Internal High Speed oscillator (HSI) + * in STOP mode to be quickly available as kernel clock for USARTs and I2Cs. + * @note Keeping the HSI ON in STOP mode allows to avoid slowing down the communication + * speed because of the HSI startup time. + * @note The enable of this function has not effect on the HSION bit. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSISTOP_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSIKERON) + +#define __HAL_RCC_HSISTOP_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON) + +/** @brief Macro to configure the HSISYS clock. + * @param __HSIDIV__ specifies the HSI16 division factor. + * This parameter can be one of the following values: + * @arg @ref RCC_HSI_DIV1 HSI clock source is divided by 1 + * @arg @ref RCC_HSI_DIV2 HSI clock source is divided by 2 + * @arg @ref RCC_HSI_DIV4 HSI clock source is divided by 4 + * @arg @ref RCC_HSI_DIV8 HSI clock source is divided by 8 + * @arg @ref RCC_HSI_DIV16 HSI clock source is divided by 16 + * @arg @ref RCC_HSI_DIV32 HSI clock source is divided by 32 + * @arg @ref RCC_HSI_DIV64 HSI clock source is divided by 64 + * @arg @ref RCC_HSI_DIV128 HSI clock source is divided by 128 + */ +#define __HAL_RCC_HSI_CONFIG(__HSIDIV__) \ + MODIFY_REG(RCC->CR, RCC_CR_HSIDIV, (__HSIDIV__)) + +/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI). + * @note After enabling the LSI, the application software should wait on + * LSIRDY flag to be set indicating that LSI clock is stable and can + * be used to clock the IWDG and/or the RTC. + * @note LSI can not be disabled if the IWDG is running. + * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator + * clock cycles. + * @retval None + */ +#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION) + +#define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_LSION) + +/** + * @brief Macro to configure the External High Speed oscillator (HSE). + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application + * software should wait on HSERDY flag to be set indicating that HSE clock + * is stable and can be used to clock the PLL and/or system clock. + * @note HSE state can not be changed if it is used directly or through the + * PLL as system clock. In this case, you have to select another source + * of the system clock then change the HSE state (ex. disable it). + * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. + * @note This function reset the CSSON bit, so if the clock security system(CSS) + * was previously enabled you have to enable it again after calling this + * function. + * @param __STATE__ specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg @ref RCC_HSE_OFF Turn OFF the HSE oscillator, HSERDY flag goes low after + * 6 HSE oscillator clock cycles. + * @arg @ref RCC_HSE_ON Turn ON the HSE oscillator. + * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock. + * @retval None + */ +#define __HAL_RCC_HSE_CONFIG(__STATE__) do { \ + if((__STATE__) == RCC_HSE_ON) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else if((__STATE__) == RCC_HSE_BYPASS) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + } while(0U) + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE). + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this macro. User should request a transition to LSE Off + * first and then LSE On or LSE Bypass. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application + * software should wait on LSERDY flag to be set indicating that LSE clock + * is stable and can be used to clock the RTC. + * @param __STATE__ specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg @ref RCC_LSE_OFF Turn OFF the LSE oscillator, LSERDY flag goes low after + * 6 LSE oscillator clock cycles. + * @arg @ref RCC_LSE_ON Turn ON the LSE oscillator. + * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock. + * @retval None + */ +#define __HAL_RCC_LSE_CONFIG(__STATE__) do { \ + if((__STATE__) == RCC_LSE_ON) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else if((__STATE__) == RCC_LSE_BYPASS) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + } while(0U) + +#if defined(RCC_HSI48_SUPPORT) +/** @brief Macros to enable or disable the Internal High Speed 48MHz oscillator (HSI48). + * @note The HSI48 is stopped by hardware when entering STOP and STANDBY modes. + * @note After enabling the HSI48, the application software should wait on HSI48RDY + * flag to be set indicating that HSI48 clock is stable. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSI48_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSI48ON) + +#define __HAL_RCC_HSI48_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSI48ON) + +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @} + */ + +/** @addtogroup RCC_RTC_Clock_Configuration + * @{ + */ + +/** @brief Macros to configure the RTC clock (RTCCLK). + * @note As the RTC clock configuration bits are in the Backup domain and write + * access is denied to this domain after reset, you have to enable write + * access using the Power Backup Access macro before to configure + * the RTC clock source (to be done once after reset). + * @note Once the RTC clock is configured it cannot be changed unless the + * Backup domain is reset using __HAL_RCC_BACKUPRESET_FORCE() macro, or by + * a Power On Reset (POR). + * + * @param __RTC_CLKSOURCE__ specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_NONE No clock selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 selected + * + * @note If the LSE or LSI is used as RTC clock source, the RTC continues to + * work in STOP and STANDBY modes, and can be used as wakeup source. + * However, when the HSE clock is used as RTC clock source, the RTC + * cannot be used in STOP and STANDBY modes. + * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as + * RTC clock source). + * @retval None + */ +#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) \ + MODIFY_REG( RCC->BDCR, RCC_BDCR_RTCSEL, (__RTC_CLKSOURCE__)) + + +/** @brief Macro to get the RTC clock source. + * @retval The returned value can be one of the following: + * @arg @ref RCC_RTCCLKSOURCE_NONE No clock selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 selected + */ +#define __HAL_RCC_GET_RTC_SOURCE() ((uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL))) + +/** @brief Macros to enable or disable the main PLL. + * @note After enabling the main PLL, the application software should wait on + * PLLRDY flag to be set indicating that PLL clock is stable and can + * be used as system clock source. + * @note The main PLL can not be disabled if it is used as system clock source + * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. + * @retval None + */ + +/** + * @} + */ + +/** @addtogroup RCC_Clock_Configuration + * @{ + */ + +#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON) + +#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLON) + +/** @brief Macro to configure the PLL clock source. + * @note This function must be used only when the main PLL is disabled. + * @param __PLLSOURCE__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSOURCE_NONE No clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry + * @retval None + * + */ +#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__)) + +/** @brief Macro to configure the PLL multiplication factor. + * @note This function must be used only when the main PLL is disabled. + * @param __PLLM__ specifies the division factor for PLL VCO input clock + * This parameter must be a value of RCC_PLLM_Clock_Divider. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 4 to 16 MHz. It is recommended to select a frequency + * of 16 MHz to limit PLL jitter. + * @retval None + * + */ +#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, (__PLLM__)) + +/** + * @brief Macro to configure the main PLL clock source, multiplication and division factors. + * @note This function must be used only when the main PLL is disabled. + * + * @param __PLLSOURCE__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSOURCE_NONE No clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry + * + * @param __PLLM__ specifies the division factor for PLL VCO input clock. + * This parameter must be a value of RCC_PLLM_Clock_Divider. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 4 to 16 MHz. It is recommended to select a frequency + * of 16 MHz to limit PLL jitter. + * + * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock. + * This parameter must be a number between 8 and 86. + * @note You have to set the PLLN parameter correctly to ensure that the VCO + * output frequency is between 64 and 344 MHz. + * + * @param __PLLP__ specifies the division factor for ADC clock. + * This parameter must be a value of @ref RCC_PLLP_Clock_Divider. + * + * @param __PLLQ__ specifies the division factor for RBG & HS Timers clocks.(1) + * This parameter must be a value of @ref RCC_PLLQ_Clock_Divider + * @note (1)__PLLQ__ parameter availability depends on devices + * @note If the USB FS is used in your application, you have to set the + * PLLQ parameter correctly to have 48 MHz clock for the USB. However, + * the RNG needs a frequency lower than or equal to 48 MHz to work + * correctly. + * + * @param __PLLR__ specifies the division factor for the main system clock. + * This parameter must be a value of RCC_PLLR_Clock_Divider + * @note You have to set the PLL parameters correctly to not exceed 64MHZ. + * @retval None + */ +#if defined(RCC_PLLQ_SUPPORT) +#define __HAL_RCC_PLL_CONFIG(__PLLSOURCE__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__ ) \ + MODIFY_REG(RCC->PLLCFGR, \ + (RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | \ + RCC_PLLCFGR_PLLP | RCC_PLLCFGR_PLLQ | RCC_PLLCFGR_PLLR), \ + ((uint32_t) (__PLLSOURCE__) | \ + (uint32_t) (__PLLM__) | \ + (uint32_t) ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ + (uint32_t) (__PLLP__) | \ + (uint32_t) (__PLLQ__) | \ + (uint32_t) (__PLLR__))) +#else +#define __HAL_RCC_PLL_CONFIG(__PLLSOURCE__, __PLLM__, __PLLN__, __PLLP__, __PLLR__ ) \ + MODIFY_REG(RCC->PLLCFGR, \ + (RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | \ + RCC_PLLCFGR_PLLP | RCC_PLLCFGR_PLLR), \ + ((uint32_t) (__PLLSOURCE__) | \ + (uint32_t) (__PLLM__) | \ + (uint32_t) ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ + (uint32_t) (__PLLP__) | \ + (uint32_t) (__PLLR__))) +#endif /* RCC_PLLQ_SUPPORT */ +/** @brief Macro to get the oscillator used as PLL clock source. + * @retval The oscillator used as PLL clock source. The returned value can be one + * of the following: + * @arg @ref RCC_PLLSOURCE_NONE No oscillator is used as PLL clock source. + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator is used as PLL clock source. + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator is used as PLL clock source. + */ +#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC)) + +/** + * @brief Enable each clock output (RCC_PLLRCLK, RCC_PLLQCLK(*), RCC_PLLPCLK) + * @note Enabling clock outputs RCC_PLLPCLK and RCC_PLLQCLK(*) can be done at anytime + * without the need to stop the PLL in order to save power. But RCC_PLLRCLK cannot + * be stopped if used as System Clock. + * @note (*) RCC_PLLQCLK availability depends on devices + * @param __PLLCLOCKOUT__ specifies the PLL clock to be output. + * This parameter can be one or a combination of the following values: + * @arg @ref RCC_PLLPCLK This clock is used to generate the clock for the ADC. + * @if defined(STM32G081xx) + * @arg @ref RCC_PLLQCLK This Clock is used to generate the clock for the High Speed Timers, + * and the random analog generator (<=48 MHz). + * @endif + * @arg @ref RCC_PLLRCLK This Clock is used to generate the high speed system clock (up to 64MHz) + * @retval None + */ +#define __HAL_RCC_PLLCLKOUT_ENABLE(__PLLCLOCKOUT__) SET_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) + +/** + * @brief Disable each clock output (RCC_PLLRCLK, RCC_PLLQCLK(*), RCC_PLLPCLK) + * @note Disabling clock outputs RCC_PLLPCLK and RCC_PLLQCLK(*) can be done at anytime + * without the need to stop the PLL in order to save power. But RCC_PLLRCLK cannot + * be stopped if used as System Clock. + * @note (*) RCC_PLLQCLK availability depends on devices + * @param __PLLCLOCKOUT__ specifies the PLL clock to be output. + * This parameter can be one or a combination of the following values: + * @arg @ref RCC_PLLPCLK This clock may be used to generate the clock for the ADC, I2S1. + * @if defined(STM32G081xx) + * @arg @ref RCC_PLLQCLK This Clock may be used to generate the clock for the High Speed Timers, + * and RNG (<=48 MHz). + * @endif + * @arg @ref RCC_PLLRCLK This Clock is used to generate the high speed system clock (up to 64MHz) + * @retval None + */ +#define __HAL_RCC_PLLCLKOUT_DISABLE(__PLLCLOCKOUT__) CLEAR_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) + +/** + * @brief Get clock output enable status (RCC_PLLRCLK, RCC_PLLQCLK(*), RCC_PLLPCLK) + * @param __PLLCLOCKOUT__ specifies the output PLL clock to be checked. + * This parameter can be one of the following values: + * @arg RCC_PLLPCLK This clock may be used to generate the clock for ADC, I2S1. + * @if defined(STM32G081xx) + * @arg RCC_PLLQCLK This Clock may be used to generate the clock for the HS Timers, + * the RNG (<=48 MHz). + * @endif + * @arg @ref RCC_PLLRCLK This Clock is used to generate the high speed system clock (up to 64MHz) + * @retval SET / RESET + * @note (*) RCC_PLLQCLK availability depends on devices + */ +#define __HAL_RCC_GET_PLLCLKOUT_CONFIG(__PLLCLOCKOUT__) READ_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) + +/** + * @brief Macro to configure the system clock source. + * @param __SYSCLKSOURCE__ specifies the system clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_SYSCLKSOURCE_HSI HSI oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_HSE HSE oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_PLLCLK PLL output is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_LSI LSI oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_LSE LSE oscillator is used as system clock source. + * @retval None + */ +#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__)) + +/** @brief Macro to get the clock source used as system clock. + * @retval The clock source used as system clock. The returned value can be one + * of the following: + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSI HSI used as system clock. + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSE HSE used as system clock. + * @arg @ref RCC_SYSCLKSOURCE_STATUS_PLLCLK PLL used as system clock. + * @arg @ref RCC_SYSCLKSOURCE_STATUS_LSI LSI used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_STATUS_LSE LSE used as system clock source. + */ +#define __HAL_RCC_GET_SYSCLK_SOURCE() (RCC->CFGR & RCC_CFGR_SWS) + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE) drive capability. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @param __LSEDRIVE__ specifies the new state of the LSE drive capability. + * This parameter can be one of the following values: + * @arg @ref RCC_LSEDRIVE_LOW LSE oscillator low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMLOW LSE oscillator medium low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMHIGH LSE oscillator medium high drive capability. + * @arg @ref RCC_LSEDRIVE_HIGH LSE oscillator high drive capability. + * @retval None + */ +#define __HAL_RCC_LSEDRIVE_CONFIG(__LSEDRIVE__) \ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, (uint32_t)(__LSEDRIVE__)) + +/** @brief Macro to configure the Microcontroller output clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK MCO output disabled + * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSI HSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSE HSE clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLLCLK Main PLL clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSI LSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSE LSE clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLLPCLK PLLP output clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLLQCLK PLLQ output clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_RTCCLK RTC clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_RTC_WKUP RTC_WKUP clock selected as MCO source + @if STM32G0C1xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 clock selected as MCO source for devices with HSI48 + @endif + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 MCO clock source is divided by 1 + * @arg @ref RCC_MCODIV_2 MCO clock source is divided by 2 + * @arg @ref RCC_MCODIV_4 MCO clock source is divided by 4 + * @arg @ref RCC_MCODIV_8 MCO clock source is divided by 8 + * @arg @ref RCC_MCODIV_16 MCO clock source is divided by 16 + * @arg @ref RCC_MCODIV_32 MCO clock source is divided by 32 + * @arg @ref RCC_MCODIV_64 MCO clock source is divided by 64 + * @arg @ref RCC_MCODIV_128 MCO clock source is divided by 128 + @if STM32G0C1xx + * @arg @ref RCC_MCODIV_256 MCO clock source is divided by 256 + * @arg @ref RCC_MCODIV_512 MCO clock source is divided by 512 + * @arg @ref RCC_MCODIV_1024 MCO clock source is divided by 1024 + @endif + */ +#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) + +#if defined(RCC_MCO2_SUPPORT) +/** @brief Macro to configure the Microcontroller output clock 2. + * @param __MCOCLKSOURCE__ specifies the MCO2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO2SOURCE_NOCLOCK MCO2 output disabled + * @arg @ref RCC_MCO2SOURCE_SYSCLK System clock selected as MCO source + * @arg @ref RCC_MCO2SOURCE_HSI HSI clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_HSE HSE clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_PLLCLK Main PLL clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_LSI LSI clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_LSE LSE clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_PLLPCLK PLLP output clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_PLLQCLK PLLQ output clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_RTCCLK RTC clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_RTC_WKUP RTC_WKUP clock selected as MCO2 source + @if STM32G0C1xx + * @arg @ref RCC_MCO2SOURCE_HSI48 HSI48 clock selected as MCO2 source for devices with HSI48 + @endif + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO2DIV_1 MCO2 clock source is divided by 1 + * @arg @ref RCC_MCO2DIV_2 MCO2 clock source is divided by 2 + * @arg @ref RCC_MCO2DIV_4 MCO2 clock source is divided by 4 + * @arg @ref RCC_MCO2DIV_8 MCO2 clock source is divided by 8 + * @arg @ref RCC_MCO2DIV_16 MCO2 clock source is divided by 16 + * @arg @ref RCC_MCO2DIV_32 MCO2 clock source is divided by 32 + * @arg @ref RCC_MCO2DIV_64 MCO2 clock source is divided by 64 + * @arg @ref RCC_MCO2DIV_128 MCO2 clock source is divided by 128 + * @arg @ref RCC_MCO2DIV_256 MCO2 clock source is divided by 256 + * @arg @ref RCC_MCO2DIV_512 MCO2 clock source is divided by 512 + * @arg @ref RCC_MCO2DIV_1024 MCO2 clock source is divided by 1024 + */ +#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2SEL | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) +#endif /* RCC_MCO2_SUPPORT */ + +/** + * @} + */ + +/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management + * @brief macros to manage the specified RCC Flags and interrupts. + * @{ + */ + +/** @brief Enable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt + @if STM32G0C1xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @retval None + */ +#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) SET_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Disable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt + @if STM32G0C1xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @retval None + */ +#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Clear RCC interrupt pending bits. + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt + * @arg @ref RCC_IT_CSS HSE Clock security system interrupt + * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt + @if STM32G0C1xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @retval None + */ +#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (RCC->CICR = (__INTERRUPT__)) + +/** @brief Check whether the RCC interrupt has occurred or not. + * @param __INTERRUPT__ specifies the RCC interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt + * @arg @ref RCC_IT_CSS HSE Clock security system interrupt + * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt + @if STM32G0C1xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIFR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Set RMVF bit to clear the reset flags. + * The reset flags are: RCC_FLAG_OBLRST, RCC_FLAG_PINRST, RCC_FLAG_PWRRST, + * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST. + * @retval None + */ +#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF) + +/** @brief Check whether the selected RCC flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready + * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready + * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready + * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready + * @arg @ref RCC_FLAG_LSECSSD Clock security system failure on LSE oscillator detection + * @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready + @if STM32G0C1xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @arg @ref RCC_FLAG_PWRRST BOR or POR/PDR reset + * @arg @ref RCC_FLAG_OBLRST OBLRST reset + * @arg @ref RCC_FLAG_PINRST Pin reset + * @arg @ref RCC_FLAG_SFTRST Software reset + * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset + * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset + * @arg @ref RCC_FLAG_LPWRRST Low Power reset + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#if defined(RCC_HSI48_SUPPORT) +#define __HAL_RCC_GET_FLAG(__FLAG__) \ + (((((((__FLAG__) >> 5U) == CR_REG_INDEX) ? RCC->CR : \ + ((((__FLAG__) >> 5U) == CRRCR_REG_INDEX) ? RCC->CRRCR : \ + ((((__FLAG__) >> 5U) == BDCR_REG_INDEX) ? RCC->BDCR : \ + ((((__FLAG__) >> 5U) == CSR_REG_INDEX) ? RCC->CSR : RCC->CIFR)))) & \ + (1U << ((__FLAG__) & RCC_FLAG_MASK))) != RESET) ? 1U : 0U) +#else +#define __HAL_RCC_GET_FLAG(__FLAG__) \ + (((((((__FLAG__) >> 5U) == CR_REG_INDEX) ? RCC->CR : \ + ((((__FLAG__) >> 5U) == BDCR_REG_INDEX) ? RCC->BDCR : \ + ((((__FLAG__) >> 5U) == CSR_REG_INDEX) ? RCC->CSR : RCC->CIFR))) & \ + (1U << ((__FLAG__) & RCC_FLAG_MASK))) != RESET) ? 1U : 0U) +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @} + */ + +/** + * @} + */ + +/* Include RCC HAL Extended module */ +#include "stm32g0xx_hal_rcc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_Exported_Functions + * @{ + */ + + +/** @addtogroup RCC_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_RCC_DeInit(void); +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); + +/** + * @} + */ + +/** @addtogroup RCC_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); +void HAL_RCC_EnableCSS(void); +void HAL_RCC_EnableLSECSS(void); +void HAL_RCC_DisableLSECSS(void); +uint32_t HAL_RCC_GetSysClockFreq(void); +uint32_t HAL_RCC_GetHCLKFreq(void); +uint32_t HAL_RCC_GetPCLK1Freq(void); +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); +uint32_t HAL_RCC_GetResetSource(void); +/* LSE & HSE CSS NMI IRQ handler */ +void HAL_RCC_NMI_IRQHandler(void); +/* User Callbacks in non blocking mode (IT mode) */ +void HAL_RCC_CSSCallback(void); +void HAL_RCC_LSECSSCallback(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_RCC_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc_ex.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc_ex.h new file mode 100644 index 0000000..9c2cdda --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc_ex.h @@ -0,0 +1,1590 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rcc_ex.h + * @author MCD Application Team + * @brief Header file of RCC HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_RCC_EX_H +#define STM32G0xx_HAL_RCC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Types RCCEx Exported Types + * @{ + */ + +/** + * @brief RCC extended clocks structure definition + */ +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t Usart1ClockSelection; /*!< Specifies USART1 clock source. + This parameter can be a value of @ref RCCEx_USART1_Clock_Source */ +#if defined(RCC_CCIPR_USART2SEL) + uint32_t Usart2ClockSelection; /*!< Specifies USART2 clock source. + This parameter can be a value of @ref RCCEx_USART2_Clock_Source */ +#endif /* RCC_CCIPR_USART2SEL */ + +#if defined(RCC_CCIPR_USART3SEL) + uint32_t Usart3ClockSelection; /*!< Specifies USART3 clock source. + This parameter can be a value of @ref RCCEx_USART3_Clock_Source */ +#endif /* RCC_CCIPR_USART3SEL */ + +#if defined(LPUART1) + uint32_t Lpuart1ClockSelection; /*!< Specifies LPUART1 clock source + This parameter can be a value of @ref RCCEx_LPUART1_Clock_Source */ +#endif /* LPUART1 */ + +#if defined(LPUART2) + uint32_t Lpuart2ClockSelection; /*!< Specifies LPUART2 clock source + This parameter can be a value of @ref RCCEx_LPUART2_Clock_Source */ +#endif /* LPUART2 */ + + uint32_t I2c1ClockSelection; /*!< Specifies I2C1 clock source + This parameter can be a value of @ref RCCEx_I2C1_Clock_Source */ + +#if defined(RCC_CCIPR_I2C2SEL) + uint32_t I2c2ClockSelection; /*!< Specifies I2C2 clock source + This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */ +#endif /* RCC_CCIPR_I2C2SEL */ + + uint32_t I2s1ClockSelection; /*!< Specifies I2S1 clock source + This parameter can be a value of @ref RCCEx_I2S1_Clock_Source */ +#if defined(RCC_CCIPR2_I2S2SEL) + uint32_t I2s2ClockSelection; /*!< Specifies I2S2 clock source + This parameter can be a value of @ref RCCEx_I2S2_Clock_Source */ +#endif /* RCC_CCIPR2_I2S2SEL */ +#if defined(RCC_CCIPR_LPTIM1SEL) + uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 clock source + This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */ +#endif /* RCC_CCIPR_LPTIM1SEL */ +#if defined(RCC_CCIPR_LPTIM2SEL) + uint32_t Lptim2ClockSelection; /*!< Specifies LPTIM2 clock source + This parameter can be a value of @ref RCCEx_LPTIM2_Clock_Source */ +#endif /* RCC_CCIPR_LPTIM2SEL */ +#if defined(RNG) + uint32_t RngClockSelection; /*!< Specifies RNG clock source + This parameter can be a value of @ref RCCEx_RNG_Clock_Source */ +#endif /* RNG */ + uint32_t AdcClockSelection; /*!< Specifies ADC interface clock source + This parameter can be a value of @ref RCCEx_ADC_Clock_Source */ +#if defined(CEC) + uint32_t CecClockSelection; /*!< Specifies CEC Clock clock source + This parameter can be a value of @ref RCCEx_CEC_Clock_Source */ +#endif /* CEC */ +#if defined(RCC_CCIPR_TIM1SEL) + uint32_t Tim1ClockSelection; /*!< Specifies TIM1 Clock clock source + This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */ +#endif /* RCC_CCIPR_TIM1SEL */ +#if defined(RCC_CCIPR_TIM15SEL) + uint32_t Tim15ClockSelection; /*!< Specifies TIM15 Clock clock source + This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */ +#endif /* RCC_CCIPR_TIM15SEL */ + uint32_t RTCClockSelection; /*!< Specifies RTC clock source. + This parameter can be a value of @ref RCC_RTC_Clock_Source */ +#if defined(RCC_CCIPR2_USBSEL) + uint32_t UsbClockSelection; /*!< Specifies USB Clock clock source + This parameter can be a value of @ref RCCEx_USB_Clock_Source */ +#endif /* RCC_CCIPR2_USBSEL */ +#if defined(FDCAN1) || defined(FDCAN2) + uint32_t FdcanClockSelection; /*!< Specifies FDCAN Clock clock source + This parameter can be a value of @ref RCCEx_FDCAN_Clock_Source */ +#endif /* FDCAN1 || FDCAN2 */ +} RCC_PeriphCLKInitTypeDef; + +#if defined(CRS) + +/** + * @brief RCC_CRS Init structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the division factor of the SYNC signal. + This parameter can be a value of @ref RCCEx_CRS_SynchroDivider */ + + uint32_t Source; /*!< Specifies the SYNC signal source. + This parameter can be a value of @ref RCCEx_CRS_SynchroSource */ + + uint32_t Polarity; /*!< Specifies the input polarity for the SYNC signal source. + This parameter can be a value of @ref RCCEx_CRS_SynchroPolarity */ + + uint32_t ReloadValue; /*!< Specifies the value to be loaded in the frequency error counter with each SYNC event. + It can be calculated in using macro __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) + This parameter must be a number between 0 and 0xFFFF or a value of @ref RCCEx_CRS_ReloadValueDefault .*/ + + uint32_t ErrorLimitValue; /*!< Specifies the value to be used to evaluate the captured frequency error value. + This parameter must be a number between 0 and 0xFF or a value of @ref RCCEx_CRS_ErrorLimitDefault */ + + uint32_t HSI48CalibrationValue; /*!< Specifies a user-programmable trimming value to the HSI48 oscillator. + This parameter must be a number between 0 and 0x7F or a value of @ref RCCEx_CRS_HSI48CalibrationDefault */ + +} RCC_CRSInitTypeDef; + +/** + * @brief RCC_CRS Synchronization structure definition + */ +typedef struct +{ + uint32_t ReloadValue; /*!< Specifies the value loaded in the Counter reload value. + This parameter must be a number between 0 and 0xFFFF */ + + uint32_t HSI48CalibrationValue; /*!< Specifies value loaded in HSI48 oscillator smooth trimming. + This parameter must be a number between 0 and 0x7F */ + + uint32_t FreqErrorCapture; /*!< Specifies the value loaded in the .FECAP, the frequency error counter + value latched in the time of the last SYNC event. + This parameter must be a number between 0 and 0xFFFF */ + + uint32_t FreqErrorDirection; /*!< Specifies the value loaded in the .FEDIR, the counting direction of the + frequency error counter latched in the time of the last SYNC event. + It shows whether the actual frequency is below or above the target. + This parameter must be a value of @ref RCCEx_CRS_FreqErrorDirection*/ + +} RCC_CRSSynchroInfoTypeDef; + +#endif /* CRS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants + * @{ + */ + +/** @defgroup RCCEx_LSCO_Clock_Source Low Speed Clock Source + * @{ + */ +#define RCC_LSCOSOURCE_LSI 0x00000000U /*!< LSI selection for low speed clock output */ +#define RCC_LSCOSOURCE_LSE RCC_BDCR_LSCOSEL /*!< LSE selection for low speed clock output */ +/** + * @} + */ + +/** @defgroup RCCEx_Periph_Clock_Selection Periph Clock Selection + * @{ + */ +#define RCC_PERIPHCLK_USART1 0x00000001U +#if defined(RCC_CCIPR_USART2SEL) +#define RCC_PERIPHCLK_USART2 0x00000002U +#endif /* RCC_CCIPR_USART2SEL */ +#if defined(RCC_CCIPR_USART3SEL) +#define RCC_PERIPHCLK_USART3 0x00000004U +#endif /* RCC_CCIPR_USART3SEL */ +#if defined(LPUART1) +#define RCC_PERIPHCLK_LPUART1 0x00000010U +#endif /* LPUART1 */ +#define RCC_PERIPHCLK_I2C1 0x00000020U +#if defined(RCC_CCIPR_I2C2SEL) +#define RCC_PERIPHCLK_I2C2 0x00000040U +#endif /* RCC_CCIPR_I2C2SEL */ +#if defined(RCC_CCIPR_LPTIM1SEL) +#define RCC_PERIPHCLK_LPTIM1 0x00000200U +#endif /* RCC_CCIPR_LPTIM1SEL */ +#if defined(RCC_CCIPR_LPTIM2SEL) +#define RCC_PERIPHCLK_LPTIM2 0x00000400U +#endif /* RCC_CCIPR_LPTIM2SEL */ +#define RCC_PERIPHCLK_I2S1 0x00000800U +#if defined(LPUART2) +#define RCC_PERIPHCLK_LPUART2 0x00001000U +#endif /* LPUART2 */ +#if defined(RCC_CCIPR2_I2S2SEL) +#define RCC_PERIPHCLK_I2S2 0x00002000U +#endif /* RCC_CCIPR2_I2S2SEL */ +#define RCC_PERIPHCLK_ADC 0x00004000U +#define RCC_PERIPHCLK_RTC 0x00020000U +#if defined(RCC_CCIPR_RNGSEL) +#define RCC_PERIPHCLK_RNG 0x00040000U +#endif /* RCC_CCIPR_RNGSEL */ +#if defined(RCC_CCIPR_CECSEL) +#define RCC_PERIPHCLK_CEC 0x00080000U +#endif /* RCC_CCIPR_CECSEL */ +#if defined(RCC_CCIPR_TIM1SEL) +#define RCC_PERIPHCLK_TIM1 0x00200000U +#endif /* RCC_CCIPR_TIM1SEL */ +#if defined(RCC_CCIPR_TIM15SEL) +#define RCC_PERIPHCLK_TIM15 0x00400000U +#endif /* RCC_CCIPR_TIM15SEL */ +#if defined(RCC_CCIPR2_USBSEL) +#define RCC_PERIPHCLK_USB 0x01000000U +#endif /* RCC_CCIPR2_USBSEL */ +#if defined(FDCAN1) || defined(FDCAN2) +#define RCC_PERIPHCLK_FDCAN 0x02000000U +#endif /* FDCAN1 || FDCAN2 */ +/** + * @} + */ + + +/** @defgroup RCCEx_USART1_Clock_Source RCC USART1 Clock Source + * @{ + */ +#define RCC_USART1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as USART1 clock */ +#define RCC_USART1CLKSOURCE_SYSCLK RCC_CCIPR_USART1SEL_0 /*!< SYSCLK clock selected as USART1 clock */ +#define RCC_USART1CLKSOURCE_HSI RCC_CCIPR_USART1SEL_1 /*!< HSI clock selected as USART1 clock */ +#define RCC_USART1CLKSOURCE_LSE (RCC_CCIPR_USART1SEL_0 | RCC_CCIPR_USART1SEL_1) /*!< LSE clock selected as USART1 clock */ +/** + * @} + */ + +#if defined(RCC_CCIPR_USART2SEL) +/** @defgroup RCCEx_USART2_Clock_Source RCC USART2 Clock Source + * @{ + */ +#define RCC_USART2CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as USART2 clock */ +#define RCC_USART2CLKSOURCE_SYSCLK RCC_CCIPR_USART2SEL_0 /*!< SYSCLK clock selected as USART2 clock */ +#define RCC_USART2CLKSOURCE_HSI RCC_CCIPR_USART2SEL_1 /*!< HSI clock selected as USART2 clock */ +#define RCC_USART2CLKSOURCE_LSE (RCC_CCIPR_USART2SEL_0 | RCC_CCIPR_USART2SEL_1) /*!< LSE clock selected as USART2 clock */ +/** + * @} + */ +#endif /* RCC_CCIPR_USART2SEL */ +#if defined(RCC_CCIPR_USART3SEL) +/** @defgroup RCCEx_USART3_Clock_Source RCC USART3 Clock Source + * @{ + */ +#define RCC_USART3CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as USART3 clock */ +#define RCC_USART3CLKSOURCE_SYSCLK RCC_CCIPR_USART3SEL_0 /*!< SYSCLK clock selected as USART3 clock */ +#define RCC_USART3CLKSOURCE_HSI RCC_CCIPR_USART3SEL_1 /*!< HSI clock selected as USART3 clock */ +#define RCC_USART3CLKSOURCE_LSE (RCC_CCIPR_USART3SEL_0 | RCC_CCIPR_USART3SEL_1) /*!< LSE clock selected as USART3 clock */ +/** + * @} + */ +#endif /* RCC_CCIPR_USART3SEL */ + +#if defined(LPUART1) +/** @defgroup RCCEx_LPUART1_Clock_Source RCC LPUART1 Clock Source + * @{ + */ +#define RCC_LPUART1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as LPUART1 clock */ +#define RCC_LPUART1CLKSOURCE_SYSCLK RCC_CCIPR_LPUART1SEL_0 /*!< SYSCLK clock selected as LPUART1 clock */ +#define RCC_LPUART1CLKSOURCE_HSI RCC_CCIPR_LPUART1SEL_1 /*!< HSI clock selected as LPUART1 clock */ +#define RCC_LPUART1CLKSOURCE_LSE (RCC_CCIPR_LPUART1SEL_0 | RCC_CCIPR_LPUART1SEL_1) /*!< LSE clock selected as LPUART1 clock */ +/** + * @} + */ +#endif /* LPUART1 */ + +#if defined(LPUART2) +/** @defgroup RCCEx_LPUART2_Clock_Source RCC LPUART2 Clock Source + * @{ + */ +#define RCC_LPUART2CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as LPUART2 clock */ +#define RCC_LPUART2CLKSOURCE_SYSCLK RCC_CCIPR_LPUART2SEL_0 /*!< SYSCLK clock selected as LPUART2 clock */ +#define RCC_LPUART2CLKSOURCE_HSI RCC_CCIPR_LPUART2SEL_1 /*!< HSI clock selected as LPUART2 clock */ +#define RCC_LPUART2CLKSOURCE_LSE (RCC_CCIPR_LPUART2SEL_0 | RCC_CCIPR_LPUART2SEL_1) /*!< LSE clock selected as LPUART2 clock */ +/** + * @} + */ +#endif /* LPUART2 */ + +/** @defgroup RCCEx_I2C1_Clock_Source RCC I2C1 Clock Source + * @{ + */ +#define RCC_I2C1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as I2C1 clock */ +#define RCC_I2C1CLKSOURCE_SYSCLK RCC_CCIPR_I2C1SEL_0 /*!< SYSCLK clock selected as I2C1 clock */ +#define RCC_I2C1CLKSOURCE_HSI RCC_CCIPR_I2C1SEL_1 /*!< HSI clock selected as I2C1 clock */ +/** + * @} + */ + +#if defined(RCC_CCIPR_I2C2SEL) +/** @defgroup RCCEx_I2C2_Clock_Source RCC I2C2 Clock Source + * @{ + */ +#define RCC_I2C2CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as I2C2 clock */ +#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CCIPR_I2C2SEL_0 /*!< SYSCLK clock selected as I2C2 clock */ +#define RCC_I2C2CLKSOURCE_HSI RCC_CCIPR_I2C2SEL_1 /*!< HSI clock selected as I2C2 clock */ +/** + * @} + */ +#endif /* RCC_CCIPR_I2C2SEL */ + +/** @defgroup RCCEx_I2S1_Clock_Source RCC I2S1 Clock Source + * @{ + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define RCC_I2S1CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK clock selected as I2S1 clock */ +#define RCC_I2S1CLKSOURCE_PLL RCC_CCIPR2_I2S1SEL_0 /*!< PLL "P" selected as I2S1 clock */ +#define RCC_I2S1CLKSOURCE_HSI RCC_CCIPR2_I2S1SEL_1 /*!< HSI clock selected as I2S1 clock */ +#define RCC_I2S1CLKSOURCE_EXT RCC_CCIPR2_I2S1SEL /*!< External I2S clock source selected as I2S1 clock */ +#else +#define RCC_I2S1CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK clock selected as I2S1 clock */ +#define RCC_I2S1CLKSOURCE_PLL RCC_CCIPR_I2S1SEL_0 /*!< PLL "P" selected as I2S1 clock */ +#define RCC_I2S1CLKSOURCE_HSI RCC_CCIPR_I2S1SEL_1 /*!< HSI clock selected as I2S1 clock */ +#define RCC_I2S1CLKSOURCE_EXT RCC_CCIPR_I2S1SEL /*!< External I2S clock source selected as I2S1 clock */ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +/** + * @} + */ + +#if defined(RCC_CCIPR2_I2S2SEL) +/** @defgroup RCCEx_I2S2_Clock_Source RCC I2S2 Clock Source + * @{ + */ +#define RCC_I2S2CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK clock selected as I2S2 clock */ +#define RCC_I2S2CLKSOURCE_PLL RCC_CCIPR2_I2S2SEL_0 /*!< PLL "P" selected as I2S2 clock */ +#define RCC_I2S2CLKSOURCE_HSI RCC_CCIPR2_I2S2SEL_1 /*!< HSI clock selected as I2S2 clock */ +#define RCC_I2S2CLKSOURCE_EXT RCC_CCIPR2_I2S2SEL /*!< External I2S clock source selected as I2S2 clock */ +/** + * @} + */ +#endif /* RCC_CCIPR2_I2S2SEL */ + +#if defined(RCC_CCIPR_LPTIM1SEL) +/** @defgroup RCCEx_LPTIM1_Clock_Source RCC LPTIM1 Clock Source + * @{ + */ +#define RCC_LPTIM1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as LPTimer 1 clock */ +#define RCC_LPTIM1CLKSOURCE_LSI RCC_CCIPR_LPTIM1SEL_0 /*!< LSI clock selected as LPTimer 1 clock */ +#define RCC_LPTIM1CLKSOURCE_HSI RCC_CCIPR_LPTIM1SEL_1 /*!< HSI clock selected as LPTimer 1 clock */ +#define RCC_LPTIM1CLKSOURCE_LSE RCC_CCIPR_LPTIM1SEL /*!< LSE clock selected as LPTimer 1 clock */ +/** + * @} + */ +#endif /* RCC_CCIPR_LPTIM1SEL */ + +#if defined(RCC_CCIPR_LPTIM2SEL) +/** @defgroup RCCEx_LPTIM2_Clock_Source RCC LPTIM2 Clock Source + * @{ + */ +#define RCC_LPTIM2CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as LPTimer 2 clock */ +#define RCC_LPTIM2CLKSOURCE_LSI RCC_CCIPR_LPTIM2SEL_0 /*!< LSI clock selected as LPTimer 2 clock */ +#define RCC_LPTIM2CLKSOURCE_HSI RCC_CCIPR_LPTIM2SEL_1 /*!< HSI clock selected as LPTimer 2 clock */ +#define RCC_LPTIM2CLKSOURCE_LSE RCC_CCIPR_LPTIM2SEL /*!< LSE clock selected as LPTimer 2 clock */ +/** + * @} + */ +#endif /* RCC_CCIPR_LPTIM2SEL */ + +#if defined(RNG) +/** @defgroup RCCEx_RNG_Clock_Source RCC RNG Clock Source + * @{ + */ +#define RCC_RNGCLKSOURCE_NONE 0x00000000U /*!< No clock selected */ +#define RCC_RNGCLKSOURCE_HSI_DIV8 RCC_CCIPR_RNGSEL_0 /*!< HSI oscillator divided by 8 clock selected as RNG clock */ +#define RCC_RNGCLKSOURCE_SYSCLK RCC_CCIPR_RNGSEL_1 /*!< SYSCLK selected as RNG clock */ +#define RCC_RNGCLKSOURCE_PLL (RCC_CCIPR_RNGSEL_0|RCC_CCIPR_RNGSEL_1) /*!< PLL "Q" selected as RNG clock */ + +/** + * @} + */ + +/** @defgroup RCCEx_RNG_Division_factor RCC RNG Division factor + * @{ + */ +#define RCC_RNGCLK_DIV1 0x00000000U /*!< RNG clock not divided */ +#define RCC_RNGCLK_DIV2 RCC_CCIPR_RNGDIV_0 /*!< RNG clock divided by 2 */ +#define RCC_RNGCLK_DIV4 RCC_CCIPR_RNGDIV_1 /*!< RNG clock divided by 4 */ +#define RCC_RNGCLK_DIV8 (RCC_CCIPR_RNGDIV_0|RCC_CCIPR_RNGDIV_1) /*!< RNG clock divided by 8 */ + +/** + * @} + */ +#endif /* RNG */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** @defgroup RCCEx_FDCAN_Clock_Source RCC FDCAN Clock Source + * @{ + */ +#define RCC_FDCANCLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 selected as FDCAN clock */ +#define RCC_FDCANCLKSOURCE_PLL RCC_CCIPR2_FDCANSEL_0 /*!< PLL "Q" selected as FDCAN clock */ +#define RCC_FDCANCLKSOURCE_HSE RCC_CCIPR2_FDCANSEL_1 /*!< HSE oscillator clock selected as FDCAN clock */ + +/** + * @} + */ +#endif /* FDCAN1 || FDCAN2 */ + +#if defined(RCC_CCIPR2_USBSEL) +/** @defgroup RCCEx_USB_Clock_Source USB Clock Source + * @{ + */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_USBCLKSOURCE_HSI48 0x00000000U /*!< HSI48 oscillator clock selected as USB clock */ +#endif /* RCC_HSI48_SUPPORT */ +#define RCC_USBCLKSOURCE_HSE RCC_CCIPR2_USBSEL_0 /*!< HSE oscillator clock selected as USB clock */ +#define RCC_USBCLKSOURCE_PLL RCC_CCIPR2_USBSEL_1 /*!< PLL "Q" selected as USB clock */ +/** + * @} + */ +#endif /* RCC_CCIPR2_USBSEL */ + +/** @defgroup RCCEx_ADC_Clock_Source RCC ADC Clock Source + * @{ + */ + +#define RCC_ADCCLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK used as ADC clock */ +#define RCC_ADCCLKSOURCE_PLLADC RCC_CCIPR_ADCSEL_0 /*!< PLL "P" (PLLADC) used as ADC clock */ +#define RCC_ADCCLKSOURCE_HSI RCC_CCIPR_ADCSEL_1 /*!< HSI used as ADC clock */ +/** + * @} + */ + +#if defined(CEC) +/** @defgroup RCCEx_CEC_Clock_Source RCC CEC Clock Source + * @{ + */ +#define RCC_CECCLKSOURCE_HSI_DIV488 0x00000000U /*!< HSI oscillator clock divided by 488 used as default CEC clock */ +#define RCC_CECCLKSOURCE_LSE RCC_CCIPR_CECSEL /*!< LSE oscillator clock used as CEC clock */ +/** + * @} + */ +#endif /* CEC */ + +#if defined(RCC_CCIPR_TIM1SEL) +/** @defgroup RCCEx_TIM1_Clock_Source RCC TIM1 Clock Source + * @{ + */ +#define RCC_TIM1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as Timer 1 clock */ +#define RCC_TIM1CLKSOURCE_PLL RCC_CCIPR_TIM1SEL /*!< PLL "Q" clock selected as Timer 1 clock */ +/** + * @} + */ +#endif /* RCC_CCIPR_TIM1SEL */ + +#if defined(RCC_CCIPR_TIM15SEL) +/** @defgroup RCCEx_TIM15_Clock_Source RCC TIM15 Clock Source + * @{ + */ +#define RCC_TIM15CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as Timer 15 clock */ +#define RCC_TIM15CLKSOURCE_PLL RCC_CCIPR_TIM15SEL /*!< PLL "Q" clock selected as Timer 15 clock */ + +/** + * @} + */ +#endif /* RCC_CCIPR_TIM15SEL */ + +#if defined(CRS) + +/** @defgroup RCCEx_CRS_Status RCCEx CRS Status + * @{ + */ +#define RCC_CRS_NONE 0x00000000U +#define RCC_CRS_TIMEOUT 0x00000001U +#define RCC_CRS_SYNCOK 0x00000002U +#define RCC_CRS_SYNCWARN 0x00000004U +#define RCC_CRS_SYNCERR 0x00000008U +#define RCC_CRS_SYNCMISS 0x00000010U +#define RCC_CRS_TRIMOVF 0x00000020U +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroSource RCCEx CRS SynchroSource + * @{ + */ +#define RCC_CRS_SYNC_SOURCE_GPIO 0x00000000U /*!< Synchro Signal source GPIO */ +#define RCC_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */ +#define RCC_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroDivider RCCEx CRS SynchroDivider + * @{ + */ +#define RCC_CRS_SYNC_DIV1 0x00000000U /*!< Synchro Signal not divided (default) */ +#define RCC_CRS_SYNC_DIV2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */ +#define RCC_CRS_SYNC_DIV4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */ +#define RCC_CRS_SYNC_DIV8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */ +#define RCC_CRS_SYNC_DIV16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */ +#define RCC_CRS_SYNC_DIV32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */ +#define RCC_CRS_SYNC_DIV64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */ +#define RCC_CRS_SYNC_DIV128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroPolarity RCCEx CRS SynchroPolarity + * @{ + */ +#define RCC_CRS_SYNC_POLARITY_RISING 0x00000000U /*!< Synchro Active on rising edge (default) */ +#define RCC_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_ReloadValueDefault RCCEx CRS ReloadValueDefault + * @{ + */ +#define RCC_CRS_RELOADVALUE_DEFAULT 0x0000BB7FU /*!< The reset value of the RELOAD field corresponds + to a target frequency of 48 MHz and a synchronization signal frequency of 1 kHz (SOF signal from USB). */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_ErrorLimitDefault RCCEx CRS ErrorLimitDefault + * @{ + */ +#define RCC_CRS_ERRORLIMIT_DEFAULT 0x00000022U /*!< Default Frequency error limit */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_HSI48CalibrationDefault RCCEx CRS HSI48CalibrationDefault + * @{ + */ +#define RCC_CRS_HSI48CALIBRATION_DEFAULT 0x00000040U /*!< The default value is 64, which corresponds to the middle of the trimming interval. + The trimming step is specified in the product datasheet. A higher TRIM value + corresponds to a higher output frequency */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_FreqErrorDirection RCCEx CRS FreqErrorDirection + * @{ + */ +#define RCC_CRS_FREQERRORDIR_UP 0x00000000U /*!< Upcounting direction, the actual frequency is above the target */ +#define RCC_CRS_FREQERRORDIR_DOWN CRS_ISR_FEDIR /*!< Downcounting direction, the actual frequency is below the target */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_Interrupt_Sources RCCEx CRS Interrupt Sources + * @{ + */ +#define RCC_CRS_IT_SYNCOK CRS_CR_SYNCOKIE /*!< SYNC event OK */ +#define RCC_CRS_IT_SYNCWARN CRS_CR_SYNCWARNIE /*!< SYNC warning */ +#define RCC_CRS_IT_ERR CRS_CR_ERRIE /*!< Error */ +#define RCC_CRS_IT_ESYNC CRS_CR_ESYNCIE /*!< Expected SYNC */ +#define RCC_CRS_IT_SYNCERR CRS_CR_ERRIE /*!< SYNC error */ +#define RCC_CRS_IT_SYNCMISS CRS_CR_ERRIE /*!< SYNC missed */ +#define RCC_CRS_IT_TRIMOVF CRS_CR_ERRIE /*!< Trimming overflow or underflow */ + +/** + * @} + */ + +/** @defgroup RCCEx_CRS_Flags RCCEx CRS Flags + * @{ + */ +#define RCC_CRS_FLAG_SYNCOK CRS_ISR_SYNCOKF /*!< SYNC event OK flag */ +#define RCC_CRS_FLAG_SYNCWARN CRS_ISR_SYNCWARNF /*!< SYNC warning flag */ +#define RCC_CRS_FLAG_ERR CRS_ISR_ERRF /*!< Error flag */ +#define RCC_CRS_FLAG_ESYNC CRS_ISR_ESYNCF /*!< Expected SYNC flag */ +#define RCC_CRS_FLAG_SYNCERR CRS_ISR_SYNCERR /*!< SYNC error */ +#define RCC_CRS_FLAG_SYNCMISS CRS_ISR_SYNCMISS /*!< SYNC missed*/ +#define RCC_CRS_FLAG_TRIMOVF CRS_ISR_TRIMOVF /*!< Trimming overflow or underflow */ + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros + * @{ + */ + + +/** @brief Macro to configure the I2C1 clock (I2C1CLK). + * + * @param __I2C1_CLKSOURCE__ specifies the I2C1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock + */ +#define __HAL_RCC_I2C1_CONFIG(__I2C1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C1SEL, (uint32_t)(__I2C1_CLKSOURCE__)) + +/** @brief Macro to get the I2C1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock + */ +#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C1SEL))) + +#if defined(RCC_CCIPR_I2C2SEL) +/** @brief Macro to configure the I2C2 clock (I2C2CLK). + * + * @param __I2C2_CLKSOURCE__ specifies the I2C2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock + * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock + */ +#define __HAL_RCC_I2C2_CONFIG(__I2C2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C2SEL, (uint32_t)(__I2C2_CLKSOURCE__)) + +/** @brief Macro to get the I2C2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock + * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock + */ +#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C2SEL))) +#endif /* RCC_CCIPR_I2C2SEL */ + +/** @brief Macro to configure the I2S1 clock (I2S1CLK). + * + * @param __I2S1_CLKSOURCE__ specifies the I2S1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2S1CLKSOURCE_SYSCLK System Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_PLL PLLP Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_HSI HSI Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_EXT External clock selected as I2S1 clock + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define __HAL_RCC_I2S1_CONFIG(__I2S1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_I2S1SEL, (uint32_t)(__I2S1_CLKSOURCE__)) +#else +#define __HAL_RCC_I2S1_CONFIG(__I2S1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2S1SEL, (uint32_t)(__I2S1_CLKSOURCE__)) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +/** @brief Macro to get the I2S1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2S1CLKSOURCE_SYSCLK System Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_PLL PLLP Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_HSI HSI Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_EXT External clock selected as I2S1 clock + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define __HAL_RCC_GET_I2S1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_I2S1SEL))) +#else +#define __HAL_RCC_GET_I2S1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_I2S1SEL))) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(RCC_CCIPR2_I2S2SEL) +/** @brief Macro to configure the I2S2 clock (I2S2CLK). + * + * @param __I2S2_CLKSOURCE__ specifies the I2S2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2S2CLKSOURCE_SYSCLK System Clock selected as I2S2 clock + * @arg @ref RCC_I2S2CLKSOURCE_PLL PLLP Clock selected as I2S2 clock + * @arg @ref RCC_I2S2CLKSOURCE_HSI HSI Clock selected as I2S2 clock + * @arg @ref RCC_I2S2CLKSOURCE_EXT External clock selected as I2S2 clock + */ +#define __HAL_RCC_I2S2_CONFIG(__I2S2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_I2S2SEL, (uint32_t)(__I2S2_CLKSOURCE__)) + +/** @brief Macro to get the I2S2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2S2CLKSOURCE_SYSCLK System Clock selected as I2S2 clock + * @arg @ref RCC_I2S2CLKSOURCE_PLL PLLP Clock selected as I2S2 clock + * @arg @ref RCC_I2S2CLKSOURCE_HSI HSI Clock selected as I2S2 clock + * @arg @ref RCC_I2S2CLKSOURCE_EXT External clock selected as I2S2 clock + */ +#define __HAL_RCC_GET_I2S2_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_I2S2SEL))) +#endif /* RCC_CCIPR2_I2S2SEL */ + +/** @brief Macro to configure the USART1 clock (USART1CLK). + * + * @param __USART1_CLKSOURCE__ specifies the USART1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock + */ +#define __HAL_RCC_USART1_CONFIG(__USART1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART1SEL, (uint32_t)(__USART1_CLKSOURCE__)) + +/** @brief Macro to get the USART1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock + */ +#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_USART1SEL))) + +#if defined(RCC_CCIPR_USART2SEL) +/** @brief Macro to configure the USART2 clock (USART2CLK). + * + * @param __USART2_CLKSOURCE__ specifies the USART2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock + */ +#define __HAL_RCC_USART2_CONFIG(__USART2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART2SEL, (uint32_t)(__USART2_CLKSOURCE__)) + +/** @brief Macro to get the USART2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock + */ +#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_USART2SEL))) +#endif /* RCC_CCIPR_USART2SEL */ + +#if defined(RCC_CCIPR_USART3SEL) +/** @brief Macro to configure the USART3 clock (USART3CLK). + * + * @param __USART3_CLKSOURCE__ specifies the USART3 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock + */ +#define __HAL_RCC_USART3_CONFIG(__USART3_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART3SEL, (uint32_t)(__USART3_CLKSOURCE__)) + +/** @brief Macro to get the USART3 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock + */ +#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_USART3SEL))) +#endif /* RCC_CCIPR_USART3SEL */ + +#if defined(RCC_CCIPR_LPUART1SEL) +/** @brief Macro to configure the LPUART1 clock (LPUART1CLK). + * + * @param __LPUART1_CLKSOURCE__ specifies the LPUART1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_LPUART1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_HSI HSI selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_SYSCLK System Clock selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock + */ +#define __HAL_RCC_LPUART1_CONFIG(__LPUART1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPUART1SEL, (uint32_t)(__LPUART1_CLKSOURCE__)) + +/** @brief Macro to get the LPUART1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_LPUART1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_HSI HSI selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_SYSCLK System Clock selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock + */ +#define __HAL_RCC_GET_LPUART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_LPUART1SEL))) +#endif /* RCC_CCIPR_LPUART1SEL */ + +#if defined(RCC_CCIPR_LPUART2SEL) +/** @brief Macro to configure the LPUART2 clock (LPUART2CLK). + * + * @param __LPUART2_CLKSOURCE__ specifies the LPUART2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_LPUART2CLKSOURCE_PCLK1 PCLK1 selected as LPUART2 clock + * @arg @ref RCC_LPUART2CLKSOURCE_HSI HSI selected as LPUART2 clock + * @arg @ref RCC_LPUART2CLKSOURCE_SYSCLK System Clock selected as LPUART2 clock + * @arg @ref RCC_LPUART2CLKSOURCE_LSE LSE selected as LPUART2 clock + */ +#define __HAL_RCC_LPUART2_CONFIG(__LPUART2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPUART2SEL, (uint32_t)(__LPUART2_CLKSOURCE__)) + +/** @brief Macro to get the LPUART2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_LPUART2CLKSOURCE_PCLK1 PCLK1 selected as LPUART2 clock + * @arg @ref RCC_LPUART2CLKSOURCE_HSI HSI selected as LPUART2 clock + * @arg @ref RCC_LPUART2CLKSOURCE_SYSCLK System Clock selected as LPUART2 clock + * @arg @ref RCC_LPUART2CLKSOURCE_LSE LSE selected as LPUART2 clock + */ +#define __HAL_RCC_GET_LPUART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_LPUART2SEL))) +#endif /* RCC_CCIPR_LPUART2SEL */ + +#if defined(RCC_CCIPR_LPTIM1SEL) +/** @brief Macro to configure the LPTIM1 clock (LPTIM1CLK). + * + * @param __LPTIM1_CLKSOURCE__ specifies the LPTIM1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_LPTIM1CLKSOURCE_PCLK1 PCLK1 selected as LPTIM1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_LSI HSI selected as LPTIM1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_HSI LSI selected as LPTIM1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_LSE LSE selected as LPTIM1 clock + */ +#define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPTIM1SEL, (uint32_t)(__LPTIM1_CLKSOURCE__)) + +/** @brief Macro to get the LPTIM1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_LPTIM1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_LSI HSI selected as LPUART1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_HSI System Clock selected as LPUART1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_LSE LSE selected as LPUART1 clock + */ +#define __HAL_RCC_GET_LPTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_LPTIM1SEL))) +#endif /* RCC_CCIPR_LPTIM1SEL */ + +#if defined(RCC_CCIPR_LPTIM2SEL) +/** @brief Macro to configure the LPTIM2 clock (LPTIM2CLK). + * + * @param __LPTIM2_CLKSOURCE__ specifies the LPTIM2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_LPTIM2CLKSOURCE_PCLK1 PCLK1 selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_LSI HSI selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_HSI LSI selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_LSE LSE selected as LPTIM2 clock + */ +#define __HAL_RCC_LPTIM2_CONFIG(__LPTIM2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPTIM2SEL, (uint32_t)(__LPTIM2_CLKSOURCE__)) + +/** @brief Macro to get the LPTIM2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_LPTIM2CLKSOURCE_PCLK1 PCLK1 selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_LSI HSI selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_HSI System Clock selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_LSE LSE selected as LPTIM2 clock + */ +#define __HAL_RCC_GET_LPTIM2_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_LPTIM2SEL))) +#endif /* RCC_CCIPR_LPTIM2SEL */ + +#if defined(CEC) +/** @brief Macro to configure the CEC clock (CECCLK). + * + * @param __CEC_CLKSOURCE__ specifies the CEC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_CECCLKSOURCE_HSI_DIV488 HSI_DIV_488 selected as CEC clock + * @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock + */ +#define __HAL_RCC_CEC_CONFIG(__CEC_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CECSEL, (uint32_t)(__CEC_CLKSOURCE__)) + +/** @brief Macro to get the CEC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_CECCLKSOURCE_HSI_DIV488 HSI_DIV_488 Clock selected as CEC clock + * @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock + */ +#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_CECSEL))) +#endif /* CEC */ + +#if defined(RNG) +/** @brief Macro to configure the RNG clock. + * + * + * @param __RNG_CLKSOURCE__ specifies the RNG clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_RNGCLKSOURCE_NONE No clock selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_HSI_DIV8 HSI Clock divided by 8 selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_SYSCLK System Clock selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_PLL PLLQ Output Clock selected as RNG clock + */ +#define __HAL_RCC_RNG_CONFIG(__RNG_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_RNGSEL, (uint32_t)(__RNG_CLKSOURCE__)) + +/** @brief Macro to get the RNG clock. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_RNGCLKSOURCE_NONE No clock selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_HSI_DIV8 HSI Clock divide by 8 selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_SYSCLK System clock selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_PLL PLLQ Output Clock selected as RNG clock + */ +#define __HAL_RCC_GET_RNG_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGSEL))) + +/** @brief Macro to configure the RNG clock. + * + * + * @param __RNG_CLKDIV__ specifies the RNG clock division factor. + * This parameter can be one of the following values: + * @arg @ref RCC_RNGCLK_DIV1 RNG Clock not divided + * @arg @ref RCC_RNGCLK_DIV2 RNG Clock divided by 2 + * @arg @ref RCC_RNGCLK_DIV4 RNG Clock divided by 4 + * @arg @ref RCC_RNGCLK_DIV8 RNG Clock divided by 8 + */ +#define __HAL_RCC_RNGDIV_CONFIG(__RNG_CLKDIV__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_RNGDIV, (uint32_t)(__RNG_CLKDIV__)) + +/** @brief Macro to get the RNG clock division factor. + * @retval The division factor can be one of the following values: + * @arg @ref RCC_RNGCLK_DIV1 RNG Clock not divided + * @arg @ref RCC_RNGCLK_DIV2 RNG Clock divided by 2 + * @arg @ref RCC_RNGCLK_DIV4 RNG Clock divided by 4 + * @arg @ref RCC_RNGCLK_DIV8 RNG Clock divided by 8 + */ +#define __HAL_RCC_GET_RNG_DIV() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGDIV))) +#endif /* RNG */ + +/** @brief Macro to configure the ADC interface clock + * @param __ADC_CLKSOURCE__ specifies the ADC digital interface clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_ADCCLKSOURCE_PLLADC PLL "P" (PLLADC) Clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_HSI HSI Clock selected as ADC clock + */ +#define __HAL_RCC_ADC_CONFIG(__ADC_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_ADCSEL, (uint32_t)(__ADC_CLKSOURCE__)) + +/** @brief Macro to get the ADC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_ADCCLKSOURCE_PLLADC PLL "P" (PLLADC) Clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_HSI HSI Clock selected as ADC clock + */ +#define __HAL_RCC_GET_ADC_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_ADCSEL))) + +#if defined(RCC_CCIPR_TIM1SEL) +/** @brief Macro to configure the TIM1 interface clock + * @param __TIM1_CLKSOURCE__ specifies the TIM1 digital interface clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_TIM1CLKSOURCE_PLL PLLQ Output Clock selected as TIM1 clock + * @arg @ref RCC_TIM1CLKSOURCE_PCLK1 System Clock selected as TIM1 clock + */ +#define __HAL_RCC_TIM1_CONFIG(__TIM1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_TIM1SEL, (uint32_t)(__TIM1_CLKSOURCE__)) + +/** @brief Macro to get the TIM1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_TIM1CLKSOURCE_PLL PLLQ Output Clock selected as TIM1 clock + * @arg @ref RCC_TIM1CLKSOURCE_PCLK1 System Clock selected as TIM1 clock + */ +#define __HAL_RCC_GET_TIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_TIM1SEL))) +#endif /* RCC_CCIPR_TIM1SEL */ + +#if defined(RCC_CCIPR_TIM15SEL) +/** @brief Macro to configure the TIM15 interface clock + * @param __TIM15_CLKSOURCE__ specifies the TIM15 digital interface clock source. + * This parameter can be one of the following values: + * @arg RCC_TIM15CLKSOURCE_PLL PLLQ Output Clock selected as TIM15 clock + * @arg RCC_TIM15CLKSOURCE_PCLK1 System Clock selected as TIM15 clock + */ +#define __HAL_RCC_TIM15_CONFIG(__TIM15_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_TIM15SEL, (uint32_t)(__TIM15_CLKSOURCE__)) + +/** @brief Macro to get the TIM15 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_TIM15CLKSOURCE_PLL PLLQ Output Clock selected as TIM15 clock + * @arg @ref RCC_TIM15CLKSOURCE_PCLK1 System Clock selected as TIM15 clock + */ +#define __HAL_RCC_GET_TIM15_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_TIM15SEL))) +#endif /* RCC_CCIPR_TIM15SEL */ + +#if defined(RCC_CCIPR2_USBSEL) +/** @brief Macro to configure the USB interface clock + * @param __USB_CLKSOURCE__ specifies the USB digital interface clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USBCLKSOURCE_PLL PLLQ Output Clock selected as USB clock (*) + * @arg @ref RCC_USBCLKSOURCE_HSE HSE Output Clock selected as USB clock + * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 Clock selected as USB clock (*) + * (*) Feature not available on all devices + */ +#define __HAL_RCC_USB_CONFIG(__USB_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_USBSEL, (uint32_t)(__USB_CLKSOURCE__)) + +/** @brief Macro to get the USB clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 Clock selected as USB clock + * @arg @ref RCC_USBCLKSOURCE_HSE HSE Output Clock selected as USB clock + * @arg @ref RCC_USBCLKSOURCE_PLL PLLQ Output Clock selected as USB clock + */ +#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_USBSEL))) +#endif /* RCC_CCIPR2_USBSEL */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** @brief Macro to configure the FDCAN interface clock + * @param __FDCAN_CLKSOURCE__ specifies the FDCAN digital interface clock source. + * This parameter can be one of the following values: + * @arg RCC_FDCANCLKSOURCE_PLL PLLQ Output Clock selected as FDCAN clock + * @arg RCC_FDCANCLKSOURCE_PCLK1 System Clock selected as FDCAN clock + * @arg RCC_FDCANCLKSOURCE_HSE HSE Clock selected as FDCAN clock + */ +#define __HAL_RCC_FDCAN_CONFIG(__FDCAN_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_FDCANSEL, (uint32_t)(__FDCAN_CLKSOURCE__)) + +/** @brief Macro to get the FDCAN clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_FDCANCLKSOURCE_PLL PLLQ Output Clock selected as FDCAN clock + * @arg @ref RCC_FDCANCLKSOURCE_PCLK1 System Clock selected as FDCAN clock + * @arg @ref RCC_FDCANCLKSOURCE_HSE HSE Clock selected as FDCAN clock + */ +#define __HAL_RCC_GET_FDCAN_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_FDCANSEL))) +#endif /* FDCAN1 || FDCAN2 */ + +#if defined(CRS) + +/** + * @brief Enable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_ENABLE_IT(__INTERRUPT__) SET_BIT(CRS->CR, (__INTERRUPT__)) + +/** + * @brief Disable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(CRS->CR, (__INTERRUPT__)) + +/** @brief Check whether the CRS interrupt has occurred or not. + * @param __INTERRUPT__ specifies the CRS interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_RCC_CRS_GET_IT_SOURCE(__INTERRUPT__) ((READ_BIT(CRS->CR, (__INTERRUPT__)) != 0U) ? SET : RESET) + +/** @brief Clear the CRS interrupt pending bits + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @arg @ref RCC_CRS_IT_TRIMOVF Trimming overflow or underflow interrupt + * @arg @ref RCC_CRS_IT_SYNCERR SYNC error interrupt + * @arg @ref RCC_CRS_IT_SYNCMISS SYNC missed interrupt + */ +/* CRS IT Error Mask */ +#define RCC_CRS_IT_ERROR_MASK (RCC_CRS_IT_TRIMOVF | RCC_CRS_IT_SYNCERR | RCC_CRS_IT_SYNCMISS) + +#define __HAL_RCC_CRS_CLEAR_IT(__INTERRUPT__) do { \ + if(((__INTERRUPT__) & RCC_CRS_IT_ERROR_MASK) != 0U) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__INTERRUPT__) & ~RCC_CRS_IT_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__INTERRUPT__)); \ + } \ + } while(0) + +/** + * @brief Check whether the specified CRS flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @retval The new state of _FLAG_ (TRUE or FALSE). + */ +#define __HAL_RCC_CRS_GET_FLAG(__FLAG__) (READ_BIT(CRS->ISR, (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the CRS specified FLAG. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @note RCC_CRS_FLAG_ERR clears RCC_CRS_FLAG_TRIMOVF, RCC_CRS_FLAG_SYNCERR, RCC_CRS_FLAG_SYNCMISS and consequently RCC_CRS_FLAG_ERR + * @retval None + */ + +/* CRS Flag Error Mask */ +#define RCC_CRS_FLAG_ERROR_MASK (RCC_CRS_FLAG_TRIMOVF | RCC_CRS_FLAG_SYNCERR | RCC_CRS_FLAG_SYNCMISS) + +#define __HAL_RCC_CRS_CLEAR_FLAG(__FLAG__) do { \ + if(((__FLAG__) & RCC_CRS_FLAG_ERROR_MASK) != 0U) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__FLAG__) & ~RCC_CRS_FLAG_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__FLAG__)); \ + } \ + } while(0) + +#endif /* CRS */ + +/** + * @} + */ + +#if defined(CRS) + +/** @defgroup RCCEx_CRS_Extended_Features RCCEx CRS Extended Features + * @{ + */ +/** + * @brief Enable the oscillator clock for frequency error counter. + * @note when the CEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE() SET_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Disable the oscillator clock for frequency error counter. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Enable the automatic hardware adjustment of TRIM bits. + * @note When the AUTOTRIMEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE() SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Enable or disable the automatic hardware adjustment of TRIM bits. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies + * @note The RELOAD value should be selected according to the ratio between the target frequency and the frequency + * of the synchronization source after prescaling. It is then decreased by one in order to + * reach the expected synchronization on the zero value. The formula is the following: + * RELOAD = (fTARGET / fSYNC) -1 + * @param __FTARGET__ Target frequency (value in Hz) + * @param __FSYNC__ Synchronization signal frequency (value in Hz) + * @retval None + */ +#define __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U) + +/** + * @} + */ + +#endif /* CRS */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCCEx_Exported_Functions + * @{ + */ + +/** @addtogroup RCCEx_Exported_Functions_Group1 + * @{ + */ + +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); + +/** + * @} + */ + +/** @addtogroup RCCEx_Exported_Functions_Group2 + * @{ + */ + +void HAL_RCCEx_EnableLSCO(uint32_t LSCOSource); +void HAL_RCCEx_DisableLSCO(void); + +/** + * @} + */ + +#if defined(CRS) + +/** @addtogroup RCCEx_Exported_Functions_Group3 + * @{ + */ + +void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit); +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void); +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo); +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout); +void HAL_RCCEx_CRS_IRQHandler(void); +void HAL_RCCEx_CRS_SyncOkCallback(void); +void HAL_RCCEx_CRS_SyncWarnCallback(void); +void HAL_RCCEx_CRS_ExpectedSyncCallback(void); +void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error); + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Macros RCCEx Private Macros + * @{ + */ + +#define IS_RCC_LSCOSOURCE(__SOURCE__) (((__SOURCE__) == RCC_LSCOSOURCE_LSI) || \ + ((__SOURCE__) == RCC_LSCOSOURCE_LSE)) + +#if defined(STM32G0C1xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART2) == RCC_PERIPHCLK_LPUART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \ + (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_FDCAN) == RCC_PERIPHCLK_FDCAN) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)) + +#elif defined(STM32G0B1xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART2) == RCC_PERIPHCLK_LPUART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_FDCAN) == RCC_PERIPHCLK_FDCAN) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)) + +#elif defined(STM32G0B0xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB)) + +#elif defined(STM32G081xx) +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \ + (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)) +#elif defined(STM32G071xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)) + +#elif defined(STM32G070xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC)) + +#elif defined(STM32G061xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)) + +#elif defined(STM32G051xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)) + +#elif defined(STM32G041xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1)) + +#elif defined(STM32G031xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1)) + +#elif defined(STM32G030xx) || defined(STM32G050xx) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC)) +#endif /* STM32G0C1xx */ + +#define IS_RCC_USART1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USART1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_HSI)) + +#if defined(RCC_CCIPR_USART2SEL) +#define IS_RCC_USART2CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USART2CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_USART2CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_USART2CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_USART2CLKSOURCE_HSI)) +#endif /* RCC_CCIPR_USART2SEL */ + +#if defined(RCC_CCIPR_USART3SEL) +#define IS_RCC_USART3CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USART3CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_USART3CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_USART3CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_USART3CLKSOURCE_HSI)) +#endif /* RCC_CCIPR_USART3SEL */ + +#if defined(LPUART1) +#define IS_RCC_LPUART1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_LPUART1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_LPUART1CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_LPUART1CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_LPUART1CLKSOURCE_HSI)) +#endif /* LPUART1 */ + +#if defined(LPUART2) +#define IS_RCC_LPUART2CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_LPUART2CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_LPUART2CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_LPUART2CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_LPUART2CLKSOURCE_HSI)) +#endif /* LPUART2 */ + +#define IS_RCC_I2C1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2C1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_I2C1CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_I2C1CLKSOURCE_HSI)) + +#if defined(RCC_CCIPR_I2C2SEL) +#define IS_RCC_I2C2CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2C2CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_I2C2CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_I2C2CLKSOURCE_HSI)) + +#endif /* RCC_CCIPR_I2C2SEL */ + +#define IS_RCC_I2S1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2S1CLKSOURCE_SYSCLK)|| \ + ((__SOURCE__) == RCC_I2S1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_I2S1CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_I2S1CLKSOURCE_EXT)) + +#if defined(RCC_CCIPR2_I2S2SEL) +#define IS_RCC_I2S2CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2S2CLKSOURCE_SYSCLK)|| \ + ((__SOURCE__) == RCC_I2S2CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_I2S2CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_I2S2CLKSOURCE_EXT)) +#endif /* RCC_CCIPR2_I2S2SEL */ + +#if defined(RCC_CCIPR_LPTIM1SEL) +#define IS_RCC_LPTIM1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_LPTIM1CLKSOURCE_PCLK1)|| \ + ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSE)) +#endif /* RCC_CCIPR_LPTIM1SEL */ + +#if defined(RCC_CCIPR_LPTIM2SEL) +#define IS_RCC_LPTIM2CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_LPTIM2CLKSOURCE_PCLK1)|| \ + ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSE)) +#endif /* RCC_CCIPR_LPTIM2SEL */ + +#define IS_RCC_ADCCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_ADCCLKSOURCE_PLLADC) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_HSI)) + +#if defined(RNG) +#define IS_RCC_RNGCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_RNGCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_HSI_DIV8) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_PLL)) +#define IS_RCC_RNGDIV(__DIV__) \ + (((__DIV__) == RCC_RNGCLK_DIV1) || \ + ((__DIV__) == RCC_RNGCLK_DIV2) || \ + ((__DIV__) == RCC_RNGCLK_DIV4) || \ + ((__DIV__) == RCC_RNGCLK_DIV8)) +#endif /* RNG */ + +#if defined(CEC) +#define IS_RCC_CECCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_CECCLKSOURCE_HSI_DIV488)|| \ + ((__SOURCE__) == RCC_CECCLKSOURCE_LSE)) +#endif /* CEC */ + +#if defined(FDCAN1) || defined(FDCAN2) +#define IS_RCC_FDCANCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_FDCANCLKSOURCE_HSE)|| \ + ((__SOURCE__) == RCC_FDCANCLKSOURCE_PLL)|| \ + ((__SOURCE__) == RCC_FDCANCLKSOURCE_PCLK1)) + +#endif /* FDCAN1 */ + +#if defined(RCC_HSI48_SUPPORT) +#define IS_RCC_USBCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USBCLKSOURCE_HSI48)|| \ + ((__SOURCE__) == RCC_USBCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_USBCLKSOURCE_PLL)) +#else +#define IS_RCC_USBCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USBCLKSOURCE_HSE)|| \ + ((__SOURCE__) == RCC_USBCLKSOURCE_PLL)) +#endif /* RCC_HSI48_SUPPORT */ + +#if defined(RCC_CCIPR_TIM1SEL) +#define IS_RCC_TIM1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_TIM1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_TIM1CLKSOURCE_PCLK1)) +#endif /* RCC_CCIPR_TIM1SEL */ + +#if defined(RCC_CCIPR_TIM15SEL) +#define IS_RCC_TIM15CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_TIM15CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_TIM15CLKSOURCE_PCLK1)) +#endif /* RCC_CCIPR_TIM15SEL */ + +#if defined(CRS) + +#define IS_RCC_CRS_SYNC_SOURCE(__SOURCE__) (((__SOURCE__) == RCC_CRS_SYNC_SOURCE_GPIO) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_LSE) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_USB)) + +#define IS_RCC_CRS_SYNC_DIV(__DIV__) (((__DIV__) == RCC_CRS_SYNC_DIV1) || ((__DIV__) == RCC_CRS_SYNC_DIV2) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV4) || ((__DIV__) == RCC_CRS_SYNC_DIV8) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV16) || ((__DIV__) == RCC_CRS_SYNC_DIV32) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV64) || ((__DIV__) == RCC_CRS_SYNC_DIV128)) + +#define IS_RCC_CRS_SYNC_POLARITY(__POLARITY__) (((__POLARITY__) == RCC_CRS_SYNC_POLARITY_RISING) || \ + ((__POLARITY__) == RCC_CRS_SYNC_POLARITY_FALLING)) + +#define IS_RCC_CRS_RELOADVALUE(__VALUE__) (((__VALUE__) <= 0xFFFFU)) + +#define IS_RCC_CRS_ERRORLIMIT(__VALUE__) (((__VALUE__) <= 0xFFU)) + +#define IS_RCC_CRS_HSI48CALIBRATION(__VALUE__) (((__VALUE__) <= 0x7FU)) + +#define IS_RCC_CRS_FREQERRORDIR(__DIR__) (((__DIR__) == RCC_CRS_FREQERRORDIR_UP) || \ + ((__DIR__) == RCC_CRS_FREQERRORDIR_DOWN)) + +#endif /* CRS */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_RCC_EX_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rtc.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rtc.h new file mode 100644 index 0000000..14f55c9 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rtc.h @@ -0,0 +1,989 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rtc.h + * @author MCD Application Team + * @brief Header file of RTC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_RTC_H +#define STM32G0xx_HAL_RTC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup RTC RTC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RTC_Exported_Types RTC Exported Types + * @{ + */ + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_RTC_STATE_RESET = 0x00U, /*!< RTC not yet initialized or disabled */ + HAL_RTC_STATE_READY = 0x01U, /*!< RTC initialized and ready for use */ + HAL_RTC_STATE_BUSY = 0x02U, /*!< RTC process is ongoing */ + HAL_RTC_STATE_TIMEOUT = 0x03U, /*!< RTC timeout state */ + HAL_RTC_STATE_ERROR = 0x04U /*!< RTC error state */ + +}HAL_RTCStateTypeDef; + +/** + * @brief RTC Configuration Structure definition + */ +typedef struct +{ + uint32_t HourFormat; /*!< Specifies the RTC Hour Format. + This parameter can be a value of @ref RTC_Hour_Formats */ + + uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */ + + uint32_t SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF */ + + uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC output. + This parameter can be a value of @ref RTCEx_Output_selection_Definitions */ + + uint32_t OutPutRemap; /*!< Specifies the remap for RTC output. + This parameter can be a value of @ref RTC_Output_ALARM_OUT_Remap */ + + uint32_t OutPutPolarity; /*!< Specifies the polarity of the output signal. + This parameter can be a value of @ref RTC_Output_Polarity_Definitions */ + + uint32_t OutPutType; /*!< Specifies the RTC Output Pin mode. + This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */ + + uint32_t OutPutPullUp; /*!< Specifies the RTC Output Pull-Up mode. + This parameter can be a value of @ref RTC_Output_PullUp_ALARM_OUT */ +}RTC_InitTypeDef; + +/** + * @brief RTC Time structure definition + */ +typedef struct +{ + uint8_t Hours; /*!< Specifies the RTC Time Hour. + This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected. + This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected */ + + uint8_t Minutes; /*!< Specifies the RTC Time Minutes. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ + + uint8_t Seconds; /*!< Specifies the RTC Time Seconds. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ + + uint8_t TimeFormat; /*!< Specifies the RTC AM/PM Time. + This parameter can be a value of @ref RTC_AM_PM_Definitions */ + + uint32_t SubSeconds; /*!< Specifies the RTC_SSR RTC Sub Second register content. + This parameter corresponds to a time unit range between [0-1] Second + with [1 Sec / SecondFraction +1] granularity */ + + uint32_t SecondFraction; /*!< Specifies the range or granularity of Sub Second register content + corresponding to Synchronous pre-scaler factor value (PREDIV_S) + This parameter corresponds to a time unit range between [0-1] Second + with [1 Sec / SecondFraction +1] granularity. + This field will be used only by HAL_RTC_GetTime function */ + + uint32_t DayLightSaving; /*!< This interface is deprecated. To manage Daylight Saving Time, + please use HAL_RTC_DST_xxx functions */ + + uint32_t StoreOperation; /*!< This interface is deprecated. To manage Daylight Saving Time, + please use HAL_RTC_DST_xxx functions */ +}RTC_TimeTypeDef; + +/** + * @brief RTC Date structure definition + */ +typedef struct +{ + uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay. + This parameter can be a value of @ref RTC_WeekDay_Definitions */ + + uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format). + This parameter can be a value of @ref RTC_Month_Date_Definitions */ + + uint8_t Date; /*!< Specifies the RTC Date. + This parameter must be a number between Min_Data = 1 and Max_Data = 31 */ + + uint8_t Year; /*!< Specifies the RTC Date Year. + This parameter must be a number between Min_Data = 0 and Max_Data = 99 */ + +}RTC_DateTypeDef; + +/** + * @brief RTC Alarm structure definition + */ +typedef struct +{ + RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */ + + uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks. + This parameter can be a value of @ref RTC_AlarmMask_Definitions */ + + uint32_t AlarmSubSecondMask; /*!< Specifies the RTC Alarm SubSeconds Masks. + This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */ + + uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay. + This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */ + + uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay. + If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range. + If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */ + + uint32_t Alarm; /*!< Specifies the alarm . + This parameter can be a value of @ref RTC_Alarms_Definitions */ +}RTC_AlarmTypeDef; + +/** + * @brief RTC Handle Structure definition + */ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +typedef struct __RTC_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ +{ + RTC_TypeDef *Instance; /*!< Register base address */ + + uint32_t TampOffset; /*!< Offset to TAMP instance */ + + RTC_InitTypeDef Init; /*!< RTC required parameters */ + + HAL_LockTypeDef Lock; /*!< RTC locking object */ + + __IO HAL_RTCStateTypeDef State; /*!< Time communication state */ + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + void (* AlarmAEventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Alarm A Event callback */ + + void (* AlarmBEventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Alarm B Event callback */ + + void (* TimeStampEventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC TimeStamp Event callback */ + + void (* WakeUpTimerEventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC WakeUpTimer Event callback */ + + void (* Tamper1EventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Tamper 1 Event callback */ + + void (* Tamper2EventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Tamper 2 Event callback */ + +#if defined(TAMP_CR1_TAMP3E) + void (* Tamper3EventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Tamper 3 Event callback */ +#endif /* TAMP_CR1_TAMP3E */ + + void (* InternalTamper3EventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Internal Tamper 3 Event callback */ + + void (* InternalTamper4EventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Internal Tamper 4 Event callback */ + + void (* InternalTamper5EventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Internal Tamper 5 Event callback */ + + void (* InternalTamper6EventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Internal Tamper 6 Event callback */ + + + void (* MspInitCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Msp Init callback */ + + void (* MspDeInitCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Msp DeInit callback */ + +#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */ + +}RTC_HandleTypeDef; + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL RTC Callback ID enumeration definition + */ +typedef enum +{ + HAL_RTC_ALARM_A_EVENT_CB_ID = 0x00U, /*!< RTC Alarm A Event Callback ID */ + HAL_RTC_ALARM_B_EVENT_CB_ID = 0x01U, /*!< RTC Alarm B Event Callback ID */ + HAL_RTC_TIMESTAMP_EVENT_CB_ID = 0x02U, /*!< RTC TimeStamp Event Callback ID */ + HAL_RTC_WAKEUPTIMER_EVENT_CB_ID = 0x03U, /*!< RTC WakeUp Timer Event Callback ID */ + HAL_RTC_TAMPER1_EVENT_CB_ID = 0x04U, /*!< RTC Tamper 1 Callback ID */ + HAL_RTC_TAMPER2_EVENT_CB_ID = 0x05U, /*!< RTC Tamper 2 Callback ID */ +#if defined(TAMP_CR1_TAMP3E) + HAL_RTC_TAMPER3_EVENT_CB_ID = 0x06U, /*!< RTC Tamper 3 Callback ID */ +#endif /* TAMP_CR1_TAMP3E */ + HAL_RTC_INTERNAL_TAMPER3_EVENT_CB_ID = 0x09U, /*!< RTC Internal Tamper 3 Callback ID */ + HAL_RTC_INTERNAL_TAMPER4_EVENT_CB_ID = 0x0AU, /*!< RTC Internal Tamper 4 Callback ID */ + HAL_RTC_INTERNAL_TAMPER5_EVENT_CB_ID = 0x0BU, /*!< RTC Internal Tamper 5 Callback ID */ + HAL_RTC_INTERNAL_TAMPER6_EVENT_CB_ID = 0x0CU, /*!< RTC Internal Tamper 6 Callback ID */ + HAL_RTC_MSPINIT_CB_ID = 0x0EU, /*!< RTC Msp Init callback ID */ + HAL_RTC_MSPDEINIT_CB_ID = 0x0FU /*!< RTC Msp DeInit callback ID */ +}HAL_RTC_CallbackIDTypeDef; + +/** + * @brief HAL RTC Callback pointer definition + */ +typedef void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef * hrtc); /*!< pointer to an RTC callback function */ +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RTC_Exported_Constants RTC Exported Constants + * @{ + */ + +/** @defgroup RTC_Hour_Formats RTC Hour Formats + * @{ + */ +#define RTC_HOURFORMAT_24 0x00000000u +#define RTC_HOURFORMAT_12 RTC_CR_FMT +/** + * @} + */ + +/** @defgroup RTCEx_Output_selection_Definitions RTCEx Output Selection Definition + * @{ + */ +#define RTC_OUTPUT_DISABLE 0x00000000u +#define RTC_OUTPUT_ALARMA RTC_CR_OSEL_0 +#define RTC_OUTPUT_ALARMB RTC_CR_OSEL_1 +#define RTC_OUTPUT_WAKEUP RTC_CR_OSEL +#define RTC_OUTPUT_TAMPER RTC_CR_TAMPOE +/** + * @} + */ + +/** @defgroup RTC_Output_Polarity_Definitions RTC Output Polarity Definitions + * @{ + */ +#define RTC_OUTPUT_POLARITY_HIGH 0x00000000u +#define RTC_OUTPUT_POLARITY_LOW RTC_CR_POL +/** + * @} + */ + +/** @defgroup RTC_Output_Type_ALARM_OUT RTC Output Type ALARM OUT + * @{ + */ +#define RTC_OUTPUT_TYPE_PUSHPULL 0x00000000u +#define RTC_OUTPUT_TYPE_OPENDRAIN RTC_CR_TAMPALRM_TYPE +/** + * @} + */ + +/** @defgroup RTC_Output_PullUp_ALARM_OUT RTC Output Pull-Up ALARM OUT + * @{ + */ +#define RTC_OUTPUT_PULLUP_NONE 0x00000000u +#define RTC_OUTPUT_PULLUP_ON RTC_CR_TAMPALRM_PU +/** + * @} + */ + +/** @defgroup RTC_Output_ALARM_OUT_Remap RTC Output ALARM OUT Remap + * @{ + */ +#define RTC_OUTPUT_REMAP_NONE 0x00000000u +#define RTC_OUTPUT_REMAP_POS1 RTC_CR_OUT2EN +/** + * @} + */ + +/** @defgroup RTC_AM_PM_Definitions RTC AM PM Definitions + * @{ + */ +#define RTC_HOURFORMAT12_AM 0x0u +#define RTC_HOURFORMAT12_PM 0x1u +/** + * @} + */ + +/** @defgroup RTC_DayLightSaving_Definitions RTC DayLightSaving Definitions + * @{ + */ +#define RTC_DAYLIGHTSAVING_SUB1H RTC_CR_SUB1H +#define RTC_DAYLIGHTSAVING_ADD1H RTC_CR_ADD1H +#define RTC_DAYLIGHTSAVING_NONE 0x00000000u +/** + * @} + */ + +/** @defgroup RTC_StoreOperation_Definitions RTC StoreOperation Definitions + * @{ + */ +#define RTC_STOREOPERATION_RESET 0x00000000u +#define RTC_STOREOPERATION_SET RTC_CR_BKP +/** + * @} + */ + +/** @defgroup RTC_Input_parameter_format_definitions RTC Input Parameter Format Definitions + * @{ + */ +#define RTC_FORMAT_BIN 0x00000000u +#define RTC_FORMAT_BCD 0x00000001u +/** + * @} + */ + +/** @defgroup RTC_Month_Date_Definitions RTC Month Date Definitions + * @{ + */ + +/* Coded in BCD format */ +#define RTC_MONTH_JANUARY ((uint8_t)0x01U) +#define RTC_MONTH_FEBRUARY ((uint8_t)0x02U) +#define RTC_MONTH_MARCH ((uint8_t)0x03U) +#define RTC_MONTH_APRIL ((uint8_t)0x04U) +#define RTC_MONTH_MAY ((uint8_t)0x05U) +#define RTC_MONTH_JUNE ((uint8_t)0x06U) +#define RTC_MONTH_JULY ((uint8_t)0x07U) +#define RTC_MONTH_AUGUST ((uint8_t)0x08U) +#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09U) +#define RTC_MONTH_OCTOBER ((uint8_t)0x10U) +#define RTC_MONTH_NOVEMBER ((uint8_t)0x11U) +#define RTC_MONTH_DECEMBER ((uint8_t)0x12U) + +/** + * @} + */ + +/** @defgroup RTC_WeekDay_Definitions RTC WeekDay Definitions + * @{ + */ +#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01U) +#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02U) +#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03U) +#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04U) +#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05U) +#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06U) +#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x07U) + +/** + * @} + */ + +/** @defgroup RTC_AlarmDateWeekDay_Definitions RTC AlarmDateWeekDay Definitions + * @{ + */ +#define RTC_ALARMDATEWEEKDAYSEL_DATE 0x00000000u +#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY RTC_ALRMAR_WDSEL + +/** + * @} + */ + +/** @defgroup RTC_AlarmMask_Definitions RTC AlarmMask Definitions + * @{ + */ +#define RTC_ALARMMASK_NONE 0x00000000u +#define RTC_ALARMMASK_DATEWEEKDAY RTC_ALRMAR_MSK4 +#define RTC_ALARMMASK_HOURS RTC_ALRMAR_MSK3 +#define RTC_ALARMMASK_MINUTES RTC_ALRMAR_MSK2 +#define RTC_ALARMMASK_SECONDS RTC_ALRMAR_MSK1 +#define RTC_ALARMMASK_ALL (RTC_ALARMMASK_NONE | RTC_ALARMMASK_DATEWEEKDAY | \ + RTC_ALARMMASK_HOURS | RTC_ALARMMASK_MINUTES | \ + RTC_ALARMMASK_SECONDS) + +/** + * @} + */ + +/** @defgroup RTC_Alarms_Definitions RTC Alarms Definitions + * @{ + */ +#define RTC_ALARM_A RTC_CR_ALRAE +#define RTC_ALARM_B RTC_CR_ALRBE + +/** + * @} + */ + + + /** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions RTC Alarm Sub Seconds Masks Definitions + * @{ + */ +#define RTC_ALARMSUBSECONDMASK_ALL 0x00000000u /*!< All Alarm SS fields are masked. + There is no comparison on sub seconds + for Alarm */ +#define RTC_ALARMSUBSECONDMASK_SS14_1 RTC_ALRMASSR_MASKSS_0 /*!< SS[14:1] not used in Alarm + comparison. Only SS[0] is compared. */ +#define RTC_ALARMSUBSECONDMASK_SS14_2 RTC_ALRMASSR_MASKSS_1 /*!< SS[14:2] not used in Alarm + comparison. Only SS[1:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_3 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1) /*!< SS[14:3] not used in Alarm + comparison. Only SS[2:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_4 RTC_ALRMASSR_MASKSS_2 /*!< SS[14:4] not used in Alarm + comparison. Only SS[3:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_5 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_2) /*!< SS[14:5] not used in Alarm + comparison. Only SS[4:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_6 (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2) /*!< SS[14:6] not used in Alarm + comparison. Only SS[5:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_7 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2) /*!< SS[14:7] not used in Alarm + comparison. Only SS[6:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_8 RTC_ALRMASSR_MASKSS_3 /*!< SS[14:8] not used in Alarm + comparison. Only SS[7:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_9 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14:9] not used in Alarm + comparison. Only SS[8:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_10 (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14:10] not used in Alarm + comparison. Only SS[9:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_11 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14:11] not used in Alarm + comparison. Only SS[10:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_12 (RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14:12] not used in Alarm + comparison.Only SS[11:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_13 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14:13] not used in Alarm + comparison. Only SS[12:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14 (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14] not used in Alarm + comparison.Only SS[13:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_NONE RTC_ALRMASSR_MASKSS /*!< SS[14:0] are compared and must match + to activate alarm. */ +/** + * @} + */ + +/** @defgroup RTC_Interrupts_Definitions RTC Interrupts Definitions + * @{ + */ +#define RTC_IT_TS RTC_CR_TSIE /*!< Enable Timestamp Interrupt */ +#define RTC_IT_WUT RTC_CR_WUTIE /*!< Enable Wakeup timer Interrupt */ +#define RTC_IT_ALRA RTC_CR_ALRAIE /*!< Enable Alarm A Interrupt */ +#define RTC_IT_ALRB RTC_CR_ALRBIE /*!< Enable Alarm B Interrupt */ +/** + * @} + */ + +/** @defgroup RTC_Flag_Mask RTC Flag Mask (5bits) describe in RTC_Flags_Definitions + * @{ + */ +#define RTC_FLAG_MASK 0x001Fu /*!< RTC flags mask (5bits) */ +/** + * @} + */ + +/** @defgroup RTC_Flags_Definitions RTC Flags Definitions + * Elements values convention: 000000XX000YYYYYb + * - YYYYY : Interrupt flag position in the XX register (5bits) + * - XX : Interrupt status register (2bits) + * - 01: ICSR register + * - 10: SR or SCR or MISR registers + * @{ + */ +#define RTC_FLAG_RECALPF (0x00000100U | RTC_ICSR_RECALPF_Pos) /*!< Recalibration pending Flag */ +#define RTC_FLAG_INITF (0x00000100U | RTC_ICSR_INITF_Pos) /*!< Initialization flag */ +#define RTC_FLAG_RSF (0x00000100U | RTC_ICSR_RSF_Pos) /*!< Registers synchronization flag */ +#define RTC_FLAG_INITS (0x00000100U | RTC_ICSR_INITS_Pos) /*!< Initialization status flag */ +#define RTC_FLAG_SHPF (0x00000100U | RTC_ICSR_SHPF_Pos) /*!< Shift operation pending flag */ +#define RTC_FLAG_WUTWF (0x00000100U | RTC_ICSR_WUTWF_Pos) /*!< Wakeup timer write flag */ +#define RTC_FLAG_ALRBWF (0x00000100U | RTC_ICSR_ALRBWF_Pos) /*!< Alarm B write flag */ +#define RTC_FLAG_ALRAWF (0x00000100U | RTC_ICSR_ALRAWF_Pos) /*!< Alarm A write flag */ +#define RTC_FLAG_ITSF (0x00000200U | RTC_SR_ITSF_Pos) /*!< Internal Time-stamp flag */ +#define RTC_FLAG_TSOVF (0x00000200U | RTC_SR_TSOVF_Pos) /*!< Time-stamp overflow flag */ +#define RTC_FLAG_TSF (0x00000200U | RTC_SR_TSF_Pos) /*!< Time-stamp flag */ +#define RTC_FLAG_WUTF (0x00000200U | RTC_SR_WUTF_Pos) /*!< Wakeup timer flag */ +#define RTC_FLAG_ALRBF (0x00000200U | RTC_SR_ALRBF_Pos) /*!< Alarm B flag */ +#define RTC_FLAG_ALRAF (0x00000200U | RTC_SR_ALRAF_Pos) /*!< Alarm A flag */ +/** + * @} + */ + +/** @defgroup RTC_Clear_Flags_Definitions RTC Clear Flags Definitions + * @{ + */ +#define RTC_CLEAR_ITSF RTC_SCR_CITSF /*!< Clear Internal Time-stamp flag */ +#define RTC_CLEAR_TSOVF RTC_SCR_CTSOVF /*!< Clear Time-stamp overflow flag */ +#define RTC_CLEAR_TSF RTC_SCR_CTSF /*!< Clear Time-stamp flag */ +#define RTC_CLEAR_WUTF RTC_SCR_CWUTF /*!< Clear Wakeup timer flag */ +#define RTC_CLEAR_ALRBF RTC_SCR_CALRBF /*!< Clear Alarm B flag */ +#define RTC_CLEAR_ALRAF RTC_SCR_CALRAF /*!< Clear Alarm A flag */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup RTC_Exported_Macros RTC Exported Macros + * @{ + */ + +/** @brief Reset RTC handle state + * @param __HANDLE__ RTC handle. + * @retval None + */ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) do{\ + (__HANDLE__)->State = HAL_RTC_STATE_RESET;\ + (__HANDLE__)->MspInitCallback = NULL;\ + (__HANDLE__)->MspDeInitCallback = NULL;\ + }while(0) +#else +#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET) +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @brief Disable the write protection for RTC registers. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) \ + do{ \ + (__HANDLE__)->Instance->WPR = 0xCAU; \ + (__HANDLE__)->Instance->WPR = 0x53U; \ + } while(0U) + +/** + * @brief Enable the write protection for RTC registers. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) \ + do{ \ + (__HANDLE__)->Instance->WPR = 0xFFU; \ + } while(0U) + +/** + * @brief Check whether the RTC Calendar is initialized. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_IS_CALENDAR_INITIALIZED(__HANDLE__) (((((__HANDLE__)->Instance->ICSR) & (RTC_ICSR_INITS)) == RTC_ICSR_INITS) ? 1U : 0U) + +/** + * @brief Add 1 hour (summer time change). + * @note This interface is deprecated. + * To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions + * @param __HANDLE__ specifies the RTC handle. + * @param __BKP__ Backup + * This parameter can be: + * @arg @ref RTC_STOREOPERATION_RESET + * @arg @ref RTC_STOREOPERATION_SET + * @retval None + */ +#define __HAL_RTC_DAYLIGHT_SAVING_TIME_ADD1H(__HANDLE__, __BKP__) \ + do { \ + __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__); \ + SET_BIT((__HANDLE__)->Instance->CR, RTC_CR_ADD1H); \ + MODIFY_REG((__HANDLE__)->Instance->CR, RTC_CR_BKP , (__BKP__)); \ + __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__); \ + } while(0); + +/** + * @brief Subtract 1 hour (winter time change). + * @note This interface is deprecated. + * To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions + * @param __HANDLE__ specifies the RTC handle. + * @param __BKP__ Backup + * This parameter can be: + * @arg @ref RTC_STOREOPERATION_RESET + * @arg @ref RTC_STOREOPERATION_SET + * @retval None + */ +#define __HAL_RTC_DAYLIGHT_SAVING_TIME_SUB1H(__HANDLE__, __BKP__) \ + do { \ + __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__); \ + SET_BIT((__HANDLE__)->Instance->CR, RTC_CR_SUB1H); \ + MODIFY_REG((__HANDLE__)->Instance->CR, RTC_CR_BKP , (__BKP__)); \ + __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__); \ + } while(0); + + /** + * @brief Enable the RTC ALARMA peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE)) + +/** + * @brief Disable the RTC ALARMA peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE)) + +/** + * @brief Enable the RTC ALARMB peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_ALARMB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRBE)) + +/** + * @brief Disable the RTC ALARMB peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_ALARMB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRBE)) + +/** + * @brief Enable the RTC Alarm interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg @ref RTC_IT_ALRA Alarm A interrupt, @ref RTC_Interrupts_Definitions + * @arg @ref RTC_IT_ALRB Alarm B interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) + +/** + * @brief Disable the RTC Alarm interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg @ref RTC_IT_ALRA Alarm A interrupt + * @arg @ref RTC_IT_ALRB Alarm B interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified RTC Alarm interrupt has occurred or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to check. + * This parameter can be: + * @arg @ref RTC_IT_ALRA Alarm A interrupt + * @arg @ref RTC_IT_ALRB Alarm B interrupt + * @retval The state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->MISR) & ((__INTERRUPT__) >> 12U)) != 0U) ? 1U : 0U) + +/** + * @brief Check whether the specified RTC Alarm interrupt has been enabled or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to check. + * This parameter can be: + * @arg @ref RTC_IT_ALRA Alarm A interrupt + * @arg @ref RTC_IT_ALRB Alarm B interrupt + * @retval The state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) + +/** + * @brief Get the selected RTC Alarms flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Alarm Flag sources to check. + * This parameter can be: + * @arg @ref RTC_FLAG_ALRAF + * @arg @ref RTC_FLAG_ALRBF + * @arg @ref RTC_FLAG_ALRAWF + * @arg @ref RTC_FLAG_ALRBWF + * @retval The state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__)( \ + ((__FLAG__) == RTC_FLAG_ALRAF) ? (((((__HANDLE__)->Instance->SR) & (RTC_SR_ALRAF)) != 0U) ? 1U : 0U):\ + ((__FLAG__) == RTC_FLAG_ALRBF) ? (((((__HANDLE__)->Instance->SR) & (RTC_SR_ALRBF)) != 0U) ? 1U : 0U):\ + ((__FLAG__) == RTC_FLAG_ALRAWF) ? (((((__HANDLE__)->Instance->ICSR) & (RTC_ICSR_ALRAWF)) != 0U) ? 1U : 0U):\ + (((((__HANDLE__)->Instance->ICSR) & (RTC_ICSR_ALRBWF)) != 0U) ? 1U : 0U)) + +/** + * @brief Clear the RTC Alarms pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Alarm Flag sources to clear. + * This parameter can be: + * @arg @ref RTC_FLAG_ALRAF + * @arg @ref RTC_FLAG_ALRBF + * @retval None + */ +#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__)( \ + ((__FLAG__) == RTC_FLAG_ALRAF) ? ((__HANDLE__)->Instance->SCR |= (RTC_SCR_CALRAF)):\ + ((__HANDLE__)->Instance->SCR |= (RTC_SCR_CALRBF))) + +/** + * @brief Enable interrupt on the RTC Alarm associated Exti line. + * @retval None + */ +#define __HAL_RTC_ALARM_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief Disable interrupt on the RTC Alarm associated Exti line. + * @retval None + */ +#define __HAL_RTC_ALARM_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_ALARM_EVENT)) + +/** + * @brief Enable event on the RTC Alarm associated Exti line. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief Disable event on the RTC Alarm associated Exti line. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_ALARM_EVENT)) + +/** + * @} + */ + +/* Include RTC HAL Extended module */ +#include "stm32g0xx_hal_rtc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RTC_Exported_Functions RTC Exported Functions + * @{ + */ + +/** @defgroup RTC_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc); + +void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc); +void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group2 RTC Time and Date functions + * @{ + */ +/* RTC Time and Date functions ************************************************/ +HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); +void HAL_RTC_DST_Add1Hour(RTC_HandleTypeDef *hrtc); +void HAL_RTC_DST_Sub1Hour(RTC_HandleTypeDef *hrtc); +void HAL_RTC_DST_SetStoreOperation(RTC_HandleTypeDef *hrtc); +void HAL_RTC_DST_ClearStoreOperation(RTC_HandleTypeDef *hrtc); +uint32_t HAL_RTC_DST_ReadStoreOperation(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group3 RTC Alarm functions + * @{ + */ +/* RTC Alarm functions ********************************************************/ +HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm); +HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format); +void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group4 Peripheral Control functions + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc); +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group5 Peripheral State functions + * @{ + */ +/* Peripheral State functions *************************************************/ +HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RTC_Private_Constants RTC Private Constants + * @{ + */ +/* Masks Definition */ +#define RTC_TR_RESERVED_MASK (RTC_TR_PM | RTC_TR_HT | RTC_TR_HU | \ + RTC_TR_MNT | RTC_TR_MNU| RTC_TR_ST | \ + RTC_TR_SU) +#define RTC_DR_RESERVED_MASK (RTC_DR_YT | RTC_DR_YU | RTC_DR_WDU | \ + RTC_DR_MT | RTC_DR_MU | RTC_DR_DT | \ + RTC_DR_DU) +#define RTC_ICSR_RESERVED_MASK (RTC_ICSR_RECALPF | RTC_ICSR_INIT | RTC_ICSR_INITF | \ + RTC_ICSR_RSF | RTC_ICSR_INITS | RTC_ICSR_SHPF | \ + RTC_ICSR_WUTWF | RTC_ICSR_ALRBWF | RTC_ICSR_ALRAWF) +#define RTC_INIT_MASK 0xFFFFFFFFu +#define RTC_RSF_MASK (~(RTC_ICSR_INIT | RTC_ICSR_RSF)) + +#define RTC_TIMEOUT_VALUE 1000u + +#define RTC_EXTI_LINE_ALARM_EVENT EXTI_IMR1_IM19 /*!< External interrupt line 19 Connected to the RTC Alarm event */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RTC_Private_Macros RTC Private Macros + * @{ + */ + +/** @defgroup RTC_IS_RTC_Definitions RTC Private macros to check input parameters + * @{ + */ +#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \ + ((OUTPUT) == RTC_OUTPUT_ALARMA) || \ + ((OUTPUT) == RTC_OUTPUT_ALARMB) || \ + ((OUTPUT) == RTC_OUTPUT_WAKEUP) || \ + ((OUTPUT) == RTC_OUTPUT_TAMPER)) + +#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HOURFORMAT_12) || \ + ((FORMAT) == RTC_HOURFORMAT_24)) + +#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \ + ((POL) == RTC_OUTPUT_POLARITY_LOW)) + +#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \ + ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL)) + +#define IS_RTC_OUTPUT_PULLUP(TYPE) (((TYPE) == RTC_OUTPUT_PULLUP_NONE) || \ + ((TYPE) == RTC_OUTPUT_PULLUP_ON)) + +#define IS_RTC_OUTPUT_REMAP(REMAP) (((REMAP) == RTC_OUTPUT_REMAP_NONE) || \ + ((REMAP) == RTC_OUTPUT_REMAP_POS1)) + +#define IS_RTC_HOURFORMAT12(PM) (((PM) == RTC_HOURFORMAT12_AM) || \ + ((PM) == RTC_HOURFORMAT12_PM)) + +#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \ + ((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \ + ((SAVE) == RTC_DAYLIGHTSAVING_NONE)) + +#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \ + ((OPERATION) == RTC_STOREOPERATION_SET)) + +#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_FORMAT_BIN) || \ + ((FORMAT) == RTC_FORMAT_BCD)) + +#define IS_RTC_YEAR(YEAR) ((YEAR) <= 99u) + +#define IS_RTC_MONTH(MONTH) (((MONTH) >= 1u) && ((MONTH) <= 12u)) + +#define IS_RTC_DATE(DATE) (((DATE) >= 1u) && ((DATE) <= 31u)) + +#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SUNDAY)) + +#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) >0u) && ((DATE) <= 31u)) + +#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SUNDAY)) + +#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \ + ((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY)) + +#define IS_RTC_ALARM_MASK(MASK) (((MASK) & ~(RTC_ALARMMASK_ALL)) == 0U) + +#define IS_RTC_ALARM(ALARM) (((ALARM) == RTC_ALARM_A) || \ + ((ALARM) == RTC_ALARM_B)) + +#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= RTC_ALRMASSR_SS) + +#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_ALARMSUBSECONDMASK_ALL) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_1) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_2) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_3) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_4) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_5) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_6) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_7) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_8) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_9) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_10) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_11) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_12) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_13) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_NONE)) + +#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7Fu) + +#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7FFFu) + +#define IS_RTC_HOUR12(HOUR) (((HOUR) > 0u) && ((HOUR) <= 12u)) + +#define IS_RTC_HOUR24(HOUR) ((HOUR) <= 23u) + +#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= 59u) + +#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= 59u) + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions -------------------------------------------------------------*/ +/** @defgroup RTC_Private_Functions RTC Private Functions + * @{ + */ +HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc); +HAL_StatusTypeDef RTC_ExitInitMode(RTC_HandleTypeDef *hrtc); +uint8_t RTC_ByteToBcd2(uint8_t Value); +uint8_t RTC_Bcd2ToByte(uint8_t Value); +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_RTC_H */ + + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rtc_ex.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rtc_ex.h new file mode 100644 index 0000000..496e1ca --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rtc_ex.h @@ -0,0 +1,1162 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rtc_ex.h + * @author MCD Application Team + * @brief Header file of RTC HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_RTC_EX_H +#define STM32G0xx_HAL_RTC_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup RTCEx RTCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Types RTCEx Exported Types + * @{ + */ + +/** @defgroup RTCEx_Tamper_structure_definition RTCEx Tamper structure definition + * @{ + */ +typedef struct +{ + uint32_t Tamper; /*!< Specifies the Tamper Pin. + This parameter can be a value of @ref RTCEx_Tamper_Pins */ + + uint32_t Trigger; /*!< Specifies the Tamper Trigger. + This parameter can be a value of @ref RTCEx_Tamper_Trigger */ + + uint32_t NoErase; /*!< Specifies the Tamper no erase mode. + This parameter can be a value of @ref RTCEx_Tamper_EraseBackUp */ + + uint32_t MaskFlag; /*!< Specifies the Tamper Flag masking. + This parameter can be a value of @ref RTCEx_Tamper_MaskFlag */ + + uint32_t Filter; /*!< Specifies the TAMP Filter Tamper. + This parameter can be a value of @ref RTCEx_Tamper_Filter */ + + uint32_t SamplingFrequency; /*!< Specifies the sampling frequency. + This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies */ + + uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration . + This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration */ + + uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp . + This parameter can be a value of @ref RTCEx_Tamper_Pull_UP */ + + uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection. + This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */ +}RTC_TamperTypeDef; +/** + * @} + */ + + +/** @defgroup RTCEx_Internal_Tamper_structure_definition RTCEx Internal Tamper structure definition + * @{ + */ +typedef struct +{ + uint32_t IntTamper; /*!< Specifies the Internal Tamper Pin. + This parameter can be a value of @ref RTCEx_Internal_Tamper_Pins */ + + uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection. + This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */ +} RTC_InternalTamperTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants + * @{ + */ + +/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definition + * @{ + */ +#define RTC_TIMESTAMPEDGE_RISING 0x00000000u +#define RTC_TIMESTAMPEDGE_FALLING RTC_CR_TSEDGE +/** + * @} + */ + +/** @defgroup RTCEx_TimeStamp_Pin_Selections RTCEx TimeStamp Pin Selection + * @{ + */ +#define RTC_TIMESTAMPPIN_DEFAULT 0x00000000u +/** + * @} + */ + +/** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definitions + * @{ + */ +#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 0x00000000u +#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 RTC_CR_WUCKSEL_0 +#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 RTC_CR_WUCKSEL_1 +#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 (RTC_CR_WUCKSEL_0 | RTC_CR_WUCKSEL_1) +#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS RTC_CR_WUCKSEL_2 +#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS (RTC_CR_WUCKSEL_1 | RTC_CR_WUCKSEL_2) +/** + * @} + */ + +/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definitions + * @{ + */ +#define RTC_SMOOTHCALIB_PERIOD_32SEC 0x00000000u /*!< If RTCCLK = 32768 Hz, Smooth calibation + period is 32s, else 2exp20 RTCCLK pulses */ +#define RTC_SMOOTHCALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< If RTCCLK = 32768 Hz, Smooth calibation + period is 16s, else 2exp19 RTCCLK pulses */ +#define RTC_SMOOTHCALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< If RTCCLK = 32768 Hz, Smooth calibation + period is 8s, else 2exp18 RTCCLK pulses */ +/** + * @} + */ + +/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definitions + * @{ + */ +#define RTC_SMOOTHCALIB_PLUSPULSES_SET RTC_CALR_CALP /*!< The number of RTCCLK pulses added + during a X -second window = Y - CALM[8:0] + with Y = 512, 256, 128 when X = 32, 16, 8 */ +#define RTC_SMOOTHCALIB_PLUSPULSES_RESET 0x00000000u /*!< The number of RTCCLK pulses subbstited + during a 32-second window = CALM[8:0] */ + +/** + * @} + */ + /** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output selection Definitions + * @{ + */ +#define RTC_CALIBOUTPUT_512HZ 0x00000000u +#define RTC_CALIBOUTPUT_1HZ RTC_CR_COSEL + +/** + * @} + */ + + +/** @defgroup RTCEx_Add_1_Second_Parameter_Definition RTCEx Add 1 Second Parameter Definitions + * @{ + */ +#define RTC_SHIFTADD1S_RESET 0x00000000u +#define RTC_SHIFTADD1S_SET RTC_SHIFTR_ADD1S +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Pins RTCEx Tamper Pins Definition + * @{ + */ +#define RTC_TAMPER_1 TAMP_CR1_TAMP1E +#define RTC_TAMPER_2 TAMP_CR1_TAMP2E +#if defined(TAMP_CR1_TAMP3E) +#define RTC_TAMPER_3 TAMP_CR1_TAMP3E +#define RTC_TAMPER_ALL (TAMP_CR1_TAMP1E | TAMP_CR1_TAMP2E | TAMP_CR1_TAMP3E) +#else +#define RTC_TAMPER_ALL (TAMP_CR1_TAMP1E | TAMP_CR1_TAMP2E) +#endif /* TAMP_CR1_TAMP3E */ +/** + * @} + */ + +/** @defgroup RTCEx_Internal_Tamper_Pins RTCEx Internal Tamper Pins Definition + * @{ + */ +#define RTC_INT_TAMPER_3 TAMP_CR1_ITAMP3E +#define RTC_INT_TAMPER_4 TAMP_CR1_ITAMP4E +#define RTC_INT_TAMPER_5 TAMP_CR1_ITAMP5E +#define RTC_INT_TAMPER_6 TAMP_CR1_ITAMP6E +#define RTC_INT_TAMPER_ALL (TAMP_CR1_ITAMP3E | TAMP_CR1_ITAMP4E | \ + TAMP_CR1_ITAMP5E | TAMP_CR1_ITAMP6E) +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Trigger RTCEx Tamper Trigger + * @{ + */ +#define RTC_TAMPERTRIGGER_RISINGEDGE 0x00u +#define RTC_TAMPERTRIGGER_FALLINGEDGE 0x01u +#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE +#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_MaskFlag RTCEx Tamper MaskFlag + * @{ + */ +#define RTC_TAMPERMASK_FLAG_DISABLE 0x00u +#define RTC_TAMPERMASK_FLAG_ENABLE 0x01u +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_EraseBackUp RTCEx Tamper EraseBackUp +* @{ +*/ +#define RTC_TAMPER_ERASE_BACKUP_ENABLE 0x00u +#define RTC_TAMPER_ERASE_BACKUP_DISABLE 0x01u +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Filter RTCEx Tamper Filter + * @{ + */ +#define RTC_TAMPERFILTER_DISABLE 0x00000000U /*!< Tamper filter is disabled */ +#define RTC_TAMPERFILTER_2SAMPLE TAMP_FLTCR_TAMPFLT_0 /*!< Tamper is activated after 2 + consecutive samples at the active level */ +#define RTC_TAMPERFILTER_4SAMPLE TAMP_FLTCR_TAMPFLT_1 /*!< Tamper is activated after 4 + consecutive samples at the active level */ +#define RTC_TAMPERFILTER_8SAMPLE TAMP_FLTCR_TAMPFLT /*!< Tamper is activated after 8 + consecutive samples at the active level */ +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Sampling_Frequencies RTCEx Tamper Sampling Frequencies + * @{ + */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 0x00000000U /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 32768 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 TAMP_FLTCR_TAMPFREQ_0 /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 16384 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 TAMP_FLTCR_TAMPFREQ_1 /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 8192 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 (TAMP_FLTCR_TAMPFREQ_0 | TAMP_FLTCR_TAMPFREQ_1) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 4096 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 TAMP_FLTCR_TAMPFREQ_2 /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 2048 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 (TAMP_FLTCR_TAMPFREQ_0 | TAMP_FLTCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 1024 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 (TAMP_FLTCR_TAMPFREQ_1 | TAMP_FLTCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 512 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 (TAMP_FLTCR_TAMPFREQ_0 | TAMP_FLTCR_TAMPFREQ_1 | \ + TAMP_FLTCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 256 */ +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration RTCEx Tamper Pin Precharge Duration + * @{ + */ +#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK 0x00000000U /*!< Tamper pins are pre-charged before + sampling during 1 RTCCLK cycle */ +#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK TAMP_FLTCR_TAMPPRCH_0 /*!< Tamper pins are pre-charged before + sampling during 2 RTCCLK cycles */ +#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK TAMP_FLTCR_TAMPPRCH_1 /*!< Tamper pins are pre-charged before + sampling during 4 RTCCLK cycles */ +#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK (TAMP_FLTCR_TAMPPRCH_0 | TAMP_FLTCR_TAMPPRCH_1) /*!< Tamper pins are pre-charged before + sampling during 8 RTCCLK cycles */ +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Pull_UP RTCEx Tamper Pull UP + * @{ + */ +#define RTC_TAMPER_PULLUP_ENABLE 0x00000000u /*!< Tamper pins are pre-charged before sampling */ +#define RTC_TAMPER_PULLUP_DISABLE TAMP_FLTCR_TAMPPUDIS /*!< Tamper pins pre-charge is disabled */ +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTCEx Tamper TimeStamp On Tamper Detection Definitions + * @{ + */ +#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE 0x00000000u /*!< TimeStamp on Tamper Detection event is not saved */ +#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE RTC_CR_TAMPTS /*!< TimeStamp on Tamper Detection event saved */ +/** + * @} + */ + + +/** @defgroup RTCEx_Internal_Tamper_Interrupt RTCEx Internal Tamper Interrupt + * @{ + */ +#define RTC_IT_TAMP1 TAMP_IER_TAMP1IE /*!< Tamper 1 Interrupt */ +#define RTC_IT_TAMP2 TAMP_IER_TAMP2IE /*!< Tamper 2 Interrupt */ +#if defined(TAMP_CR1_TAMP3E) +#define RTC_IT_TAMP3 TAMP_IER_TAMP3IE /*!< Tamper 3 Interrupt */ +#define RTC_IT_TAMPALL (TAMP_IER_TAMP1IE | TAMP_IER_TAMP2IE | TAMP_IER_TAMP3IE) +#else +#define RTC_IT_TAMPALL (TAMP_IER_TAMP1IE | TAMP_IER_TAMP2IE) +#endif /* TAMP_CR1_TAMP3E */ + +#define RTC_IT_INT_TAMP3 TAMP_IER_ITAMP3IE +#define RTC_IT_INT_TAMP4 TAMP_IER_ITAMP4IE +#define RTC_IT_INT_TAMP5 TAMP_IER_ITAMP5IE +#define RTC_IT_INT_TAMP6 TAMP_IER_ITAMP6IE +#define RTC_IT_INT_TAMPALL (RTC_IT_INT_TAMP3 | RTC_IT_INT_TAMP4 | \ + RTC_IT_INT_TAMP5 | RTC_IT_INT_TAMP6) +/** + * @} + */ + +/** @defgroup RTCEx_Flags RTCEx Flags + * @{ + */ +#define RTC_FLAG_TAMP1 TAMP_SR_TAMP1F +#define RTC_FLAG_TAMP2 TAMP_SR_TAMP2F +#if defined(TAMP_CR1_TAMP3E) +#define RTC_FLAG_TAMP3 TAMP_SR_TAMP3F +#define RTC_FLAG_TAMPALL (RTC_FLAG_TAMP1 | RTC_FLAG_TAMP2 | RTC_FLAG_TAMP3) +#else +#define RTC_FLAG_TAMPALL (RTC_FLAG_TAMP1 | RTC_FLAG_TAMP2) +#endif /* TAMP_CR1_TAMP3E */ +#define RTC_FLAG_INT_TAMP3 TAMP_SR_ITAMP3F +#define RTC_FLAG_INT_TAMP4 TAMP_SR_ITAMP4F +#define RTC_FLAG_INT_TAMP5 TAMP_SR_ITAMP5F +#define RTC_FLAG_INT_TAMP6 TAMP_SR_ITAMP6F +#define RTC_FLAG_INT_TAMPALL (RTC_FLAG_INT_TAMP3 | RTC_FLAG_INT_TAMP4 | \ + RTC_FLAG_INT_TAMP5 | RTC_FLAG_INT_TAMP6) +/** + * @} + */ + + +/** @defgroup RTCEx_Backup_Registers RTCEx Backup Registers Definition + * @{ + */ +#define RTC_BKP_NUMBER 0x00000005u +#define RTC_BKP_DR0 0x00000000u +#define RTC_BKP_DR1 0x00000001u +#define RTC_BKP_DR2 0x00000002u +#define RTC_BKP_DR3 0x00000003u +#define RTC_BKP_DR4 0x00000004u +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros + * @{ + */ + +/** @brief Clear the specified RTC pending flag. + * @param __HANDLE__ specifies the RTC Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref RTC_CLEAR_ITSF Clear Internal Time-stamp flag + * @arg @ref RTC_CLEAR_TSOVF Clear Time-stamp overflow flag + * @arg @ref RTC_CLEAR_TSF Clear Time-stamp flag + * @arg @ref RTC_CLEAR_WUTF Clear Wakeup timer flag + * @arg @ref RTC_CLEAR_ALRBF Clear Alarm B flag + * @arg @ref RTC_CLEAR_ALRAF Clear Alarm A flag + * @retval None + */ +#define __HAL_RTC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SCR |= (__FLAG__)) + +/** @brief Check whether the specified RTC flag is set or not. + * @param __HANDLE__ specifies the RTC Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be: + * @arg @ref RTC_FLAG_RECALPF Recalibration pending Flag + * @arg @ref RTC_FLAG_INITF Initialization flag + * @arg @ref RTC_FLAG_RSF Registers synchronization flag + * @arg @ref RTC_FLAG_INITS Initialization status flag + * @arg @ref RTC_FLAG_SHPF Shift operation pending flag + * @arg @ref RTC_FLAG_WUTWF Wakeup timer write flag + * @arg @ref RTC_FLAG_ALRBWF Alarm B write flag + * @arg @ref RTC_FLAG_ALRAWF Alarm A write flag + * @arg @ref RTC_FLAG_ITSF Internal Time-stamp flag + * @arg @ref RTC_FLAG_TSOVF Time-stamp overflow flag + * @arg @ref RTC_FLAG_TSF Time-stamp flag + * @arg @ref RTC_FLAG_WUTF Wakeup timer flag + * @arg @ref RTC_FLAG_ALRBF Alarm B flag + * @arg @ref RTC_FLAG_ALRAF Alarm A flag + * @retval The state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_RTC_GET_FLAG(__HANDLE__, __FLAG__) (((((__FLAG__)) >> 8U) == 1U) ? ((((__HANDLE__)->Instance->ICSR & (1U << (((uint16_t)(__FLAG__)) & RTC_FLAG_MASK))) != 0U) ? 1U : 0U) :\ + ((((__HANDLE__)->Instance->SR & (1U << (((uint16_t)(__FLAG__)) & RTC_FLAG_MASK))) != 0U) ? 1U : 0U)) + +/* ---------------------------------WAKEUPTIMER---------------------------------*/ +/** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer + * @{ + */ +/** + * @brief Enable the RTC WakeUp Timer peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE)) + +/** + * @brief Disable the RTC WakeUp Timer peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE)) + +/** + * @brief Enable the RTC WakeUpTimer interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be enabled. + * This parameter can be: + * @arg @ref RTC_IT_WUT WakeUpTimer interrupt + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) + +/** + * @brief Disable the RTC WakeUpTimer interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be disabled. + * This parameter can be: + * @arg @ref RTC_IT_WUT WakeUpTimer interrupt + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt to check. + * This parameter can be: + * @arg @ref RTC_IT_WUT WakeUpTimer interrupt + * @retval The state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->MISR) & ((__INTERRUPT__) >> 12U)) != 0U) ? 1U : 0U) + +/** + * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Wake Up timer interrupt sources to check. + * This parameter can be: + * @arg @ref RTC_IT_WUT WakeUpTimer interrupt + * @retval The state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) + +/** + * @brief Get the selected RTC WakeUpTimers flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC WakeUpTimer Flag is pending or not. + * This parameter can be: + * @arg @ref RTC_FLAG_WUTF + * @arg @ref RTC_FLAG_WUTWF + * @retval The state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__)( \ + ((__FLAG__) == RTC_FLAG_WUTF) ? (((((__HANDLE__)->Instance->SR) & (RTC_SR_WUTF)) != 0) ? 1U : 0U):\ + (((((__HANDLE__)->Instance->ICSR) & (RTC_ICSR_WUTWF)) != 0) ? 1U : 0U)) + +/** + * @brief Clear the RTC Wake Up timers pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC WakeUpTimer Flag to clear. + * This parameter can be: + * @arg @ref RTC_FLAG_WUTF + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SCR |= (RTC_SCR_CWUTF)) + +/* WAKE-UP TIMER EXTI */ +/* ------------------ */ +/** + * @brief Enable interrupt on the RTC WakeUp Timer associated Exti line. + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) + +/** + * @brief Disable interrupt on the RTC WakeUp Timer associated Exti line. + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) + +/** + * @brief Enable event on the RTC WakeUp Timer associated Exti line. + * @retval None. + */ +#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) + +/** + * @brief Disable event on the RTC WakeUp Timer associated Exti line. + * @retval None. + */ +#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) + +/** + * @} + */ + +/* ---------------------------------TIMESTAMP---------------------------------*/ +/** @defgroup RTCEx_Timestamp RTC Timestamp + * @{ + */ +/** + * @brief Enable the RTC TimeStamp peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE)) + +/** + * @brief Disable the RTC TimeStamp peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE)) + +/** + * @brief Enable the RTC TimeStamp interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be enabled. + * This parameter can be: + * @arg @ref RTC_IT_TS TimeStamp interrupt + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) + +/** + * @brief Disable the RTC TimeStamp interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be disabled. + * This parameter can be: + * @arg @ref RTC_IT_TS TimeStamp interrupt + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt to check. + * This parameter can be: + * @arg @ref RTC_IT_TS TimeStamp interrupt + * @retval The state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->MISR) & ((__INTERRUPT__) >> 12U)) != 0U) ? 1U : 0U) + +/** + * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Time Stamp interrupt source to check. + * This parameter can be: + * @arg @ref RTC_IT_TS TimeStamp interrupt + * @retval The state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) + +/** + * @brief Get the selected RTC TimeStamps flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC TimeStamp Flag is pending or not. + * This parameter can be: + * @arg @ref RTC_FLAG_TSF + * @arg @ref RTC_FLAG_TSOVF + * @retval The state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__)( \ + ((__FLAG__) == RTC_FLAG_TSF) ? (((((__HANDLE__)->Instance->SR) & (RTC_SR_TSF)) != 0) ? 1U : 0U):\ + (((((__HANDLE__)->Instance->SR) & (RTC_SR_TSOVF)) != 0) ? 1U : 0U)) + +/** + * @brief Clear the RTC Time Stamps pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC TimeStamp Flag to clear. + * This parameter can be: + * @arg @ref RTC_FLAG_TSF + * @arg @ref RTC_FLAG_TSOVF + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__)( \ + ((__FLAG__) == RTC_FLAG_TSF) ? ((__HANDLE__)->Instance->SCR |= (RTC_SCR_CTSF)):\ + ((__HANDLE__)->Instance->SCR |= (RTC_SCR_CTSOVF))) + +/** + * @brief Enable interrupt on the RTC Timestamp associated Exti line. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_TIMESTAMP_EVENT) + +/** + * @brief Disable interrupt on the RTC Timestamp associated Exti line. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_TIMESTAMP_EVENT)) + +/** + * @brief Enable event on the RTC Timestamp associated Exti line. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_TIMESTAMP_EVENT) + +/** + * @brief Disable event on the RTC Timestamp associated Exti line. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_TIMESTAMP_EVENT)) + +/** + * @brief Enable the RTC internal TimeStamp peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ITSE)) + +/** + * @brief Disable the RTC internal TimeStamp peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ITSE)) + +/** + * @brief Get the selected RTC Internal Time Stamps flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Internal Time Stamp Flag is pending or not. + * This parameter can be: + * @arg @ref RTC_FLAG_ITSF + * @retval The state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->SR) & (RTC_SR_ITSF)) != 0) ? 1U : 0U) + +/** + * @brief Clear the RTC Internal Time Stamps pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Internal Time Stamp Flag source to clear. + * This parameter can be: + * @arg @ref RTC_FLAG_ITSF + * @retval None + */ +#define __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SCR |= (RTC_SCR_CITSF)) + +/** + * @brief Enable the RTC TimeStamp on Tamper detection. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TAMPTS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TAMPTS)) + +/** + * @brief Disable the RTC TimeStamp on Tamper detection. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TAMPTS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TAMPTS)) + +/** + * @brief Enable the RTC Tamper detection output. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TAMPOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TAMPOE)) + +/** + * @brief Disable the RTC Tamper detection output. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TAMPOE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TAMPOE)) + + +/** + * @} + */ + + +/* ------------------------------Calibration----------------------------------*/ +/** @defgroup RTCEx_Calibration RTC Calibration + * @{ + */ + +/** + * @brief Enable the RTC calibration output. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE)) + +/** + * @brief Disable the calibration output. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE)) + + +/** + * @brief Enable the clock reference detection. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON)) + +/** + * @brief Disable the clock reference detection. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON)) + + +/** + * @brief Get the selected RTC shift operations flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC shift operation Flag is pending or not. + * This parameter can be: + * @arg @ref RTC_FLAG_SHPF + * @retval The state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ICSR) & (RTC_ICSR_SHPF)) != 0U) ? 1U : 0U) +/** + * @} + */ + + +/* ------------------------------Tamper----------------------------------*/ +/** @defgroup RTCEx_Tamper RTCEx tamper + * @{ + */ +/** + * @brief Enable the TAMP Tamper input detection. + * @param __HANDLE__ specifies the RTC handle. + * @param __TAMPER__ specifies the RTC Tamper source to be enabled. + * This parameter can be any combination of the following values: + * @arg RTC_ALL_TAMPER: All tampers + * @arg RTC_TAMPER_1: Tamper1 + * @arg RTC_TAMPER_2: Tamper2 + * @arg RTC_TAMPER_3: Tamper3 (*) + * @retval None + */ +#define __HAL_RTC_TAMPER_ENABLE(__HANDLE__, __TAMPER__) (((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->CR1 |= (__TAMPER__)) + +/** + * @brief Disable the TAMP Tamper input detection. + * @param __HANDLE__ specifies the TAMP handle. + * @param __TAMPER__ specifies the TAMP Tamper sources to be enabled. + * This parameter can be any combination of the following values: + * @arg RTC_ALL_TAMPER: All tampers + * @arg RTC_TAMPER_1: Tamper1 + * @arg RTC_TAMPER_2: Tamper2 + * @arg RTC_TAMPER_3: Tamper3 (*) + */ +#define __HAL_RTC_TAMPER_DISABLE(__HANDLE__, __TAMPER__) (((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->CR1 &= ~(__TAMPER__)) + + +/**************************************************************************************************/ +/** + * @brief Enable the TAMP Tamper interrupt. + * @param __HANDLE__ specifies the TAMP handle. + * @param __INTERRUPT__ specifies the TAMP Tamper interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_TAMPALL: All tampers interrupts + * @arg RTC_IT_TAMP1: Tamper1 interrupt + * @arg RTC_IT_TAMP2: Tamper2 interrupt + * @arg RTC_IT_TAMP3: Tamper3 interrupt (*) + * @retval None + */ +#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->IER |= (__INTERRUPT__)) + +/** + * @brief Disable the TAMP Tamper interrupt. + * @param __HANDLE__ specifies the TAMP handle. + * @param __INTERRUPT__ specifies the TAMP Tamper interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_TAMPALL: All tampers interrupts + * @arg RTC_IT_TAMP1: Tamper1 interrupt + * @arg RTC_IT_TAMP2: Tamper2 interrupt + * @arg RTC_IT_TAMP3: Tamper3 interrupt (*) + * @retval None + */ +#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->IER &= ~(__INTERRUPT__)) + + +/**************************************************************************************************/ +/** + * @brief Check whether the specified TAMP Tamper interrupt has occurred or not. + * @param __HANDLE__ specifies the TAMP handle. + * @param __INTERRUPT__ specifies the TAMP Tamper interrupt to check. + * This parameter can be: + * @arg RTC_IT_TAMPALL: All tampers interrupts + * @arg RTC_IT_TAMP1: Tamper1 interrupt + * @arg RTC_IT_TAMP2: Tamper2 interrupt + * @arg RTC_IT_TAMP3: Tamper3 interrupt (*) + * @arg RTC_IT_INT_TAMP3: Internal Tamper3 interrupt + * @arg RTC_IT_INT_TAMP4: Internal Tamper4 interrupt + * @arg RTC_IT_INT_TAMP5: Internal Tamper5 interrupt + * @arg RTC_IT_INT_TAMP6: Internal Tamper6 interrupt + * @retval The state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) ((((((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->MISR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) + + +/** + * @brief Check whether the specified TAMP Tamper interrupt has been enabled or not. + * @param __HANDLE__ specifies the TAMP handle. + * @param __INTERRUPT__ specifies the TAMP Tamper interrupt source to check. + * This parameter can be: + * @arg RTC_IT_TAMPALL: All tampers interrupts + * @arg RTC_IT_TAMP1: Tamper1 interrupt + * @arg RTC_IT_TAMP2: Tamper2 interrupt + * @arg RTC_IT_TAMP3: Tamper3 interrupt (*) + * @arg RTC_IT_INT_TAMPALL: All internal tampers interrupts + * @arg RTC_IT_INT_TAMP3: Internal Tamper3 interrupt + * @arg RTC_IT_INT_TAMP4: Internal Tamper4 interrupt + * @arg RTC_IT_INT_TAMP5: Internal Tamper5 interrupt + * @arg RTC_IT_INT_TAMP6: Internal Tamper6 interrupt + * @retval The state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->IER) & (__INTERRUPT__)) != 0U) ? 1U : 0U) + + +/** + * @brief Get the selected TAMP Tampers flag status. + * @param __HANDLE__ specifies the TAMP handle. + * @param __FLAG__ specifies the TAMP Tamper Flag is pending or not. + * This parameter can be: + * @arg RTC_FLAG_TAMP1: Tamper1 flag + * @arg RTC_FLAG_TAMP2: Tamper2 flag + * @arg RTC_FLAG_TAMP3: Tamper3 flag (*) + * @arg RTC_FLAG_INT_TAMP3: Internal Tamper3 flag + * @arg RTC_FLAG_INT_TAMP4: Internal Tamper4 flag + * @arg RTC_FLAG_INT_TAMP5: Internal Tamper5 flag + * @arg RTC_FLAG_INT_TAMP6: Internal Tamper6 flag + * @retval The state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->SR) & (__FLAG__)) != 0U) + +/** + * @brief Clear the TAMP Tampers pending flags. + * @param __HANDLE__ specifies the TAMP handle. + * @param __FLAG__ specifies the TAMP Tamper Flag to clear. + * This parameter can be: + * @arg RTC_FLAG_TAMPALL: All Tamper flags + * @arg RTC_FLAG_TAMP1: Tamper1 flag + * @arg RTC_FLAG_TAMP2: Tamper2 flag + * @arg RTC_FLAG_TAMP3: Tamper3 flag (*) + * @arg RTC_FLAG_INT_TAMP3: Internal Tamper3 flag + * @arg RTC_FLAG_INT_TAMP4: Internal Tamper4 flag + * @arg RTC_FLAG_INT_TAMP5: Internal Tamper5 flag + * @arg RTC_FLAG_INT_TAMP6: Internal Tamper6 flag + * @retval None + */ +#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->SCR) |= (__FLAG__)) + +/** + * @brief Enable interrupt on the TAMP associated Exti line. + * @retval None + */ +#define __HAL_RTC_TAMPER_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_TAMPER_EVENT) + +/** + * @brief Disable interrupt on the TAMP associated Exti line. + * @retval None + */ +#define __HAL_RTC_TAMPER_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_TAMPER_EVENT)) + +/** + * @brief Enable event on the TAMP associated Exti line. + * @retval None + */ +#define __HAL_RTC_TAMPER_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_TAMPER_EVENT) + +/** + * @brief Disable event on the TAMP associated Exti line. + * @retval None + */ +#define __HAL_RTC_TAMPER_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_TAMPER_EVENT)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions + * @{ + */ + +/* RTC TimeStamp functions *****************************************/ +/** @defgroup RTCEx_Exported_Functions_Group1 Extended RTC TimeStamp functions + * @{ + */ + +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); +HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format); + +void HAL_RTCEx_TimeStampIRQHandler(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + + +/* RTC Wake-up functions ******************************************************/ +/** @defgroup RTCEx_Exported_Functions_Group2 Extended RTC Wake-up functions + * @{ + */ + +HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); +HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); +HAL_StatusTypeDef HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc); +uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +/** + * @} + */ + +/* Extended Control functions ************************************************/ +/** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions + * @{ + */ + +HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue); +HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS); +HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput); +HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/* Extended RTC features functions *******************************************/ +/** @defgroup RTCEx_Exported_Functions_Group4 Extended features functions + * @{ + */ + +void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +/** + * @} + */ + +/** @defgroup RTCEx_Exported_Functions_Group5 Extended RTC Tamper functions + * @{ + */ +HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); +HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); +HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper); +HAL_StatusTypeDef HAL_RTCEx_PollForTamperEvent(RTC_HandleTypeDef *hrtc, uint32_t Tamper, uint32_t Timeout); +HAL_StatusTypeDef HAL_RTCEx_SetInternalTamper(RTC_HandleTypeDef *hrtc, RTC_InternalTamperTypeDef* sIntTamper); +HAL_StatusTypeDef HAL_RTCEx_SetInternalTamper_IT(RTC_HandleTypeDef *hrtc, RTC_InternalTamperTypeDef* sIntTamper); +HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTamper(RTC_HandleTypeDef *hrtc, uint32_t IntTamper); +HAL_StatusTypeDef HAL_RTCEx_PollForInternalTamperEvent(RTC_HandleTypeDef *hrtc, uint32_t IntTamper, uint32_t Timeout); +void HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc); +#if defined(TAMP_CR1_TAMP3E) +void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc); +#endif /* TAMP_CR1_TAMP3E */ +void HAL_RTCEx_InternalTamper3EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_InternalTamper4EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_InternalTamper5EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_InternalTamper6EventCallback(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/** @defgroup RTCEx_Exported_Functions_Group6 Extended RTC Backup register functions + * @{ + */ +void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data); +uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister); +/** + * @} + */ + + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RTCEx_Private_Constants RTCEx Private Constants + * @{ + */ +#define RTC_EXTI_LINE_TIMESTAMP_EVENT EXTI_IMR1_IM19 /*!< External interrupt line 19 Connected to the RTC Time Stamp events */ +#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT EXTI_IMR1_IM19 /*!< External interrupt line 19 Connected to the RTC Wakeup event */ +#define RTC_EXTI_LINE_TAMPER_EVENT EXTI_IMR1_IM21 /*!< External interrupt line 19 Connected to the RTC tamper events*/ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RTCEx_Private_Macros RTCEx Private Macros + * @{ + */ + +/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters + * @{ + */ +#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \ + ((EDGE) == RTC_TIMESTAMPEDGE_FALLING)) + + +#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT)) + + + +#define IS_RTC_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \ + ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE)) + +#define IS_RTC_TAMPER_TAMPERDETECTIONOUTPUT(MODE) (((MODE) == RTC_TAMPERDETECTIONOUTPUT_ENABLE) || \ + ((MODE) == RTC_TAMPERDETECTIONOUTPUT_DISABLE)) + + +#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS)) + +#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= RTC_WUTR_WUT) + +#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \ + ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \ + ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC)) + +#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \ + ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET)) + +#define IS_RTC_TAMPER(__TAMPER__) ((((__TAMPER__) & RTC_TAMPER_ALL) != 0x00U) && \ + (((__TAMPER__) & ~RTC_TAMPER_ALL) == 0x00U)) + +#define IS_RTC_INTERNAL_TAMPER(__INT_TAMPER__) ((((__INT_TAMPER__) & RTC_INT_TAMPER_ALL) != 0x00U) && \ + (((__INT_TAMPER__) & ~RTC_INT_TAMPER_ALL) == 0x00U)) + +#define IS_RTC_TAMPER_TRIGGER(__TRIGGER__) (((__TRIGGER__) == RTC_TAMPERTRIGGER_RISINGEDGE) || \ + ((__TRIGGER__) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \ + ((__TRIGGER__) == RTC_TAMPERTRIGGER_LOWLEVEL) || \ + ((__TRIGGER__) == RTC_TAMPERTRIGGER_HIGHLEVEL)) + +#define IS_RTC_TAMPER_ERASE_MODE(__MODE__) (((__MODE__) == RTC_TAMPER_ERASE_BACKUP_ENABLE) || \ + ((__MODE__) == RTC_TAMPER_ERASE_BACKUP_DISABLE)) + +#define IS_RTC_TAMPER_MASKFLAG_STATE(__STATE__) (((__STATE__) == RTC_TAMPERMASK_FLAG_ENABLE) || \ + ((__STATE__) == RTC_TAMPERMASK_FLAG_DISABLE)) + +#define IS_RTC_TAMPER_FILTER(__FILTER__) (((__FILTER__) == RTC_TAMPERFILTER_DISABLE) || \ + ((__FILTER__) == RTC_TAMPERFILTER_2SAMPLE) || \ + ((__FILTER__) == RTC_TAMPERFILTER_4SAMPLE) || \ + ((__FILTER__) == RTC_TAMPERFILTER_8SAMPLE)) + +#define IS_RTC_TAMPER_SAMPLING_FREQ(__FREQ__) (((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \ + ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \ + ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \ + ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \ + ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \ + ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \ + ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \ + ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256)) + +#define IS_RTC_TAMPER_PRECHARGE_DURATION(__DURATION__) (((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \ + ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \ + ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \ + ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK)) + +#define IS_RTC_TAMPER_PULLUP_STATE(__STATE__) (((__STATE__) == RTC_TAMPER_PULLUP_ENABLE) || \ + ((__STATE__) == RTC_TAMPER_PULLUP_DISABLE)) + +#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \ + ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE)) + +#define IS_RTC_BKP(__BKP__) ((__BKP__) < RTC_BKP_NUMBER) + + +/** @defgroup RTCEx_Smooth_calib_Minus_pulses_Definitions RTCEx Smooth calib Minus pulses Definitions + * @{ + */ +#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= RTC_CALR_CALM) +/** + * @} + */ + + +#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \ + ((SEL) == RTC_SHIFTADD1S_SET)) + + + +/** @defgroup RTCEx_Subtract_Fraction_Of_Second_Value RTCEx Subtract Fraction Of Second Value + * @{ + */ +#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= RTC_SHIFTR_SUBFS) +/** + * @} + */ +#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \ + ((OUTPUT) == RTC_CALIBOUTPUT_1HZ)) + +/** + * @} + */ + +/** + * @} + */ + + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_RTC_EX_H */ + + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi.h new file mode 100644 index 0000000..4416e93 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi.h @@ -0,0 +1,851 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_spi.h + * @author MCD Application Team + * @brief Header file of SPI HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_SPI_H +#define STM32G0xx_HAL_SPI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup SPI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SPI_Exported_Types SPI Exported Types + * @{ + */ + +/** + * @brief SPI Configuration Structure definition + */ +typedef struct +{ + uint32_t Mode; /*!< Specifies the SPI operating mode. + This parameter can be a value of @ref SPI_Mode */ + + uint32_t Direction; /*!< Specifies the SPI bidirectional mode state. + This parameter can be a value of @ref SPI_Direction */ + + uint32_t DataSize; /*!< Specifies the SPI data size. + This parameter can be a value of @ref SPI_Data_Size */ + + uint32_t CLKPolarity; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_Clock_Polarity */ + + uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_Clock_Phase */ + + uint32_t NSS; /*!< Specifies whether the NSS signal is managed by + hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_Slave_Select_management */ + + uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be + used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_BaudRate_Prescaler + @note The communication clock is derived from the master + clock. The slave clock does not need to be set. */ + + uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_MSB_LSB_transmission */ + + uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not. + This parameter can be a value of @ref SPI_TI_mode */ + + uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not. + This parameter can be a value of @ref SPI_CRC_Calculation */ + + uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. + This parameter must be an odd number between Min_Data = 1 and Max_Data = 65535 */ + + uint32_t CRCLength; /*!< Specifies the CRC Length used for the CRC calculation. + CRC Length is only used with Data8 and Data16, not other data size + This parameter can be a value of @ref SPI_CRC_length */ + + uint32_t NSSPMode; /*!< Specifies whether the NSSP signal is enabled or not . + This parameter can be a value of @ref SPI_NSSP_Mode + This mode is activated by the NSSP bit in the SPIx_CR2 register and + it takes effect only if the SPI interface is configured as Motorola SPI + master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0, + CPOL setting is ignored).. */ +} SPI_InitTypeDef; + +/** + * @brief HAL SPI State structure definition + */ +typedef enum +{ + HAL_SPI_STATE_RESET = 0x00U, /*!< Peripheral not Initialized */ + HAL_SPI_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_SPI_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */ + HAL_SPI_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */ + HAL_SPI_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */ + HAL_SPI_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */ + HAL_SPI_STATE_ERROR = 0x06U, /*!< SPI error state */ + HAL_SPI_STATE_ABORT = 0x07U /*!< SPI abort is ongoing */ +} HAL_SPI_StateTypeDef; + +/** + * @brief SPI handle Structure definition + */ +typedef struct __SPI_HandleTypeDef +{ + SPI_TypeDef *Instance; /*!< SPI registers base address */ + + SPI_InitTypeDef Init; /*!< SPI communication parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< SPI Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< SPI Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */ + + uint32_t CRCSize; /*!< SPI CRC size used for the transfer */ + + void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx ISR */ + + void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx ISR */ + + DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_SPI_StateTypeDef State; /*!< SPI communication state */ + + __IO uint32_t ErrorCode; /*!< SPI Error code */ + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + void (* TxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Completed callback */ + void (* RxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Completed callback */ + void (* TxRxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Completed callback */ + void (* TxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Half Completed callback */ + void (* RxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Half Completed callback */ + void (* TxRxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Half Completed callback */ + void (* ErrorCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Error callback */ + void (* AbortCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Abort callback */ + void (* MspInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp Init callback */ + void (* MspDeInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp DeInit callback */ + +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} SPI_HandleTypeDef; + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +/** + * @brief HAL SPI Callback ID enumeration definition + */ +typedef enum +{ + HAL_SPI_TX_COMPLETE_CB_ID = 0x00U, /*!< SPI Tx Completed callback ID */ + HAL_SPI_RX_COMPLETE_CB_ID = 0x01U, /*!< SPI Rx Completed callback ID */ + HAL_SPI_TX_RX_COMPLETE_CB_ID = 0x02U, /*!< SPI TxRx Completed callback ID */ + HAL_SPI_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< SPI Tx Half Completed callback ID */ + HAL_SPI_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< SPI Rx Half Completed callback ID */ + HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID = 0x05U, /*!< SPI TxRx Half Completed callback ID */ + HAL_SPI_ERROR_CB_ID = 0x06U, /*!< SPI Error callback ID */ + HAL_SPI_ABORT_CB_ID = 0x07U, /*!< SPI Abort callback ID */ + HAL_SPI_MSPINIT_CB_ID = 0x08U, /*!< SPI Msp Init callback ID */ + HAL_SPI_MSPDEINIT_CB_ID = 0x09U /*!< SPI Msp DeInit callback ID */ + +} HAL_SPI_CallbackIDTypeDef; + +/** + * @brief HAL SPI Callback pointer definition + */ +typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to an SPI callback function */ + +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SPI_Exported_Constants SPI Exported Constants + * @{ + */ + +/** @defgroup SPI_Error_Code SPI Error Code + * @{ + */ +#define HAL_SPI_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_SPI_ERROR_MODF (0x00000001U) /*!< MODF error */ +#define HAL_SPI_ERROR_CRC (0x00000002U) /*!< CRC error */ +#define HAL_SPI_ERROR_OVR (0x00000004U) /*!< OVR error */ +#define HAL_SPI_ERROR_FRE (0x00000008U) /*!< FRE error */ +#define HAL_SPI_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_SPI_ERROR_FLAG (0x00000020U) /*!< Error on RXNE/TXE/BSY/FTLVL/FRLVL Flag */ +#define HAL_SPI_ERROR_ABORT (0x00000040U) /*!< Error during SPI Abort procedure */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +#define HAL_SPI_ERROR_INVALID_CALLBACK (0x00000080U) /*!< Invalid Callback error */ +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SPI_Mode SPI Mode + * @{ + */ +#define SPI_MODE_SLAVE (0x00000000U) +#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI) +/** + * @} + */ + +/** @defgroup SPI_Direction SPI Direction Mode + * @{ + */ +#define SPI_DIRECTION_2LINES (0x00000000U) +#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY +#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE +/** + * @} + */ + +/** @defgroup SPI_Data_Size SPI Data Size + * @{ + */ +#define SPI_DATASIZE_4BIT (0x00000300U) +#define SPI_DATASIZE_5BIT (0x00000400U) +#define SPI_DATASIZE_6BIT (0x00000500U) +#define SPI_DATASIZE_7BIT (0x00000600U) +#define SPI_DATASIZE_8BIT (0x00000700U) +#define SPI_DATASIZE_9BIT (0x00000800U) +#define SPI_DATASIZE_10BIT (0x00000900U) +#define SPI_DATASIZE_11BIT (0x00000A00U) +#define SPI_DATASIZE_12BIT (0x00000B00U) +#define SPI_DATASIZE_13BIT (0x00000C00U) +#define SPI_DATASIZE_14BIT (0x00000D00U) +#define SPI_DATASIZE_15BIT (0x00000E00U) +#define SPI_DATASIZE_16BIT (0x00000F00U) +/** + * @} + */ + +/** @defgroup SPI_Clock_Polarity SPI Clock Polarity + * @{ + */ +#define SPI_POLARITY_LOW (0x00000000U) +#define SPI_POLARITY_HIGH SPI_CR1_CPOL +/** + * @} + */ + +/** @defgroup SPI_Clock_Phase SPI Clock Phase + * @{ + */ +#define SPI_PHASE_1EDGE (0x00000000U) +#define SPI_PHASE_2EDGE SPI_CR1_CPHA +/** + * @} + */ + +/** @defgroup SPI_Slave_Select_management SPI Slave Select Management + * @{ + */ +#define SPI_NSS_SOFT SPI_CR1_SSM +#define SPI_NSS_HARD_INPUT (0x00000000U) +#define SPI_NSS_HARD_OUTPUT (SPI_CR2_SSOE << 16U) +/** + * @} + */ + +/** @defgroup SPI_NSSP_Mode SPI NSS Pulse Mode + * @{ + */ +#define SPI_NSS_PULSE_ENABLE SPI_CR2_NSSP +#define SPI_NSS_PULSE_DISABLE (0x00000000U) +/** + * @} + */ + +/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler + * @{ + */ +#define SPI_BAUDRATEPRESCALER_2 (0x00000000U) +#define SPI_BAUDRATEPRESCALER_4 (SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_8 (SPI_CR1_BR_1) +#define SPI_BAUDRATEPRESCALER_16 (SPI_CR1_BR_1 | SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_32 (SPI_CR1_BR_2) +#define SPI_BAUDRATEPRESCALER_64 (SPI_CR1_BR_2 | SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_128 (SPI_CR1_BR_2 | SPI_CR1_BR_1) +#define SPI_BAUDRATEPRESCALER_256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0) +/** + * @} + */ + +/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transmission + * @{ + */ +#define SPI_FIRSTBIT_MSB (0x00000000U) +#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST +/** + * @} + */ + +/** @defgroup SPI_TI_mode SPI TI Mode + * @{ + */ +#define SPI_TIMODE_DISABLE (0x00000000U) +#define SPI_TIMODE_ENABLE SPI_CR2_FRF +/** + * @} + */ + +/** @defgroup SPI_CRC_Calculation SPI CRC Calculation + * @{ + */ +#define SPI_CRCCALCULATION_DISABLE (0x00000000U) +#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN +/** + * @} + */ + +/** @defgroup SPI_CRC_length SPI CRC Length + * @{ + * This parameter can be one of the following values: + * SPI_CRC_LENGTH_DATASIZE: aligned with the data size + * SPI_CRC_LENGTH_8BIT : CRC 8bit + * SPI_CRC_LENGTH_16BIT : CRC 16bit + */ +#define SPI_CRC_LENGTH_DATASIZE (0x00000000U) +#define SPI_CRC_LENGTH_8BIT (0x00000001U) +#define SPI_CRC_LENGTH_16BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup SPI_FIFO_reception_threshold SPI FIFO Reception Threshold + * @{ + * This parameter can be one of the following values: + * SPI_RXFIFO_THRESHOLD or SPI_RXFIFO_THRESHOLD_QF : + * RXNE event is generated if the FIFO + * level is greater or equal to 1/4(8-bits). + * SPI_RXFIFO_THRESHOLD_HF: RXNE event is generated if the FIFO + * level is greater or equal to 1/2(16 bits). */ +#define SPI_RXFIFO_THRESHOLD SPI_CR2_FRXTH +#define SPI_RXFIFO_THRESHOLD_QF SPI_CR2_FRXTH +#define SPI_RXFIFO_THRESHOLD_HF (0x00000000U) +/** + * @} + */ + +/** @defgroup SPI_Interrupt_definition SPI Interrupt Definition + * @{ + */ +#define SPI_IT_TXE SPI_CR2_TXEIE +#define SPI_IT_RXNE SPI_CR2_RXNEIE +#define SPI_IT_ERR SPI_CR2_ERRIE +/** + * @} + */ + +/** @defgroup SPI_Flags_definition SPI Flags Definition + * @{ + */ +#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */ +#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */ +#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */ +#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */ +#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */ +#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */ +#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */ +#define SPI_FLAG_FTLVL SPI_SR_FTLVL /* SPI fifo transmission level */ +#define SPI_FLAG_FRLVL SPI_SR_FRLVL /* SPI fifo reception level */ +#define SPI_FLAG_MASK (SPI_SR_RXNE | SPI_SR_TXE | SPI_SR_BSY | SPI_SR_CRCERR\ + | SPI_SR_MODF | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_FTLVL | SPI_SR_FRLVL) +/** + * @} + */ + +/** @defgroup SPI_transmission_fifo_status_level SPI Transmission FIFO Status Level + * @{ + */ +#define SPI_FTLVL_EMPTY (0x00000000U) +#define SPI_FTLVL_QUARTER_FULL (0x00000800U) +#define SPI_FTLVL_HALF_FULL (0x00001000U) +#define SPI_FTLVL_FULL (0x00001800U) + +/** + * @} + */ + +/** @defgroup SPI_reception_fifo_status_level SPI Reception FIFO Status Level + * @{ + */ +#define SPI_FRLVL_EMPTY (0x00000000U) +#define SPI_FRLVL_QUARTER_FULL (0x00000200U) +#define SPI_FRLVL_HALF_FULL (0x00000400U) +#define SPI_FRLVL_FULL (0x00000600U) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup SPI_Exported_Macros SPI Exported Macros + * @{ + */ + +/** @brief Reset SPI handle state. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_SPI_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET) +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + +/** @brief Enable the specified SPI interrupts. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) + +/** @brief Disable the specified SPI interrupts. + * @param __HANDLE__ specifies the SPI handle. + * This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) + +/** @brief Check whether the specified SPI interrupt source is enabled or not. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified SPI flag is set or not. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SPI_FLAG_RXNE: Receive buffer not empty flag + * @arg SPI_FLAG_TXE: Transmit buffer empty flag + * @arg SPI_FLAG_CRCERR: CRC error flag + * @arg SPI_FLAG_MODF: Mode fault flag + * @arg SPI_FLAG_OVR: Overrun flag + * @arg SPI_FLAG_BSY: Busy flag + * @arg SPI_FLAG_FRE: Frame format error flag + * @arg SPI_FLAG_FTLVL: SPI fifo transmission level + * @arg SPI_FLAG_FRLVL: SPI fifo reception level + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the SPI CRCERR pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR)) + +/** @brief Clear the SPI MODF pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_modf = 0x00U; \ + tmpreg_modf = (__HANDLE__)->Instance->SR; \ + CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE); \ + UNUSED(tmpreg_modf); \ + } while(0U) + +/** @brief Clear the SPI OVR pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_ovr = 0x00U; \ + tmpreg_ovr = (__HANDLE__)->Instance->DR; \ + tmpreg_ovr = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg_ovr); \ + } while(0U) + +/** @brief Clear the SPI FRE pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_fre = 0x00U; \ + tmpreg_fre = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg_fre); \ + }while(0U) + +/** @brief Enable the SPI peripheral. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE) + +/** @brief Disable the SPI peripheral. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SPI_Private_Macros SPI Private Macros + * @{ + */ + +/** @brief Set the SPI transmit-only mode. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_1LINE_TX(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE) + +/** @brief Set the SPI receive-only mode. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_1LINE_RX(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE) + +/** @brief Reset the CRC calculation of the SPI. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_RESET_CRC(__HANDLE__) do{CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);\ + SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);}while(0U) + +/** @brief Check whether the specified SPI flag is set or not. + * @param __SR__ copy of SPI SR register. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SPI_FLAG_RXNE: Receive buffer not empty flag + * @arg SPI_FLAG_TXE: Transmit buffer empty flag + * @arg SPI_FLAG_CRCERR: CRC error flag + * @arg SPI_FLAG_MODF: Mode fault flag + * @arg SPI_FLAG_OVR: Overrun flag + * @arg SPI_FLAG_BSY: Busy flag + * @arg SPI_FLAG_FRE: Frame format error flag + * @arg SPI_FLAG_FTLVL: SPI fifo transmission level + * @arg SPI_FLAG_FRLVL: SPI fifo reception level + * @retval SET or RESET. + */ +#define SPI_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__) & ((__FLAG__) & SPI_FLAG_MASK)) == \ + ((__FLAG__) & SPI_FLAG_MASK)) ? SET : RESET) + +/** @brief Check whether the specified SPI Interrupt is set or not. + * @param __CR2__ copy of SPI CR2 register. + * @param __INTERRUPT__ specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval SET or RESET. + */ +#define SPI_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__) & (__INTERRUPT__)) == \ + (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks if SPI Mode parameter is in allowed range. + * @param __MODE__ specifies the SPI Mode. + * This parameter can be a value of @ref SPI_Mode + * @retval None + */ +#define IS_SPI_MODE(__MODE__) (((__MODE__) == SPI_MODE_SLAVE) || \ + ((__MODE__) == SPI_MODE_MASTER)) + +/** @brief Checks if SPI Direction Mode parameter is in allowed range. + * @param __MODE__ specifies the SPI Direction Mode. + * This parameter can be a value of @ref SPI_Direction + * @retval None + */ +#define IS_SPI_DIRECTION(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \ + ((__MODE__) == SPI_DIRECTION_2LINES_RXONLY) || \ + ((__MODE__) == SPI_DIRECTION_1LINE)) + +/** @brief Checks if SPI Direction Mode parameter is 2 lines. + * @param __MODE__ specifies the SPI Direction Mode. + * @retval None + */ +#define IS_SPI_DIRECTION_2LINES(__MODE__) ((__MODE__) == SPI_DIRECTION_2LINES) + +/** @brief Checks if SPI Direction Mode parameter is 1 or 2 lines. + * @param __MODE__ specifies the SPI Direction Mode. + * @retval None + */ +#define IS_SPI_DIRECTION_2LINES_OR_1LINE(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \ + ((__MODE__) == SPI_DIRECTION_1LINE)) + +/** @brief Checks if SPI Data Size parameter is in allowed range. + * @param __DATASIZE__ specifies the SPI Data Size. + * This parameter can be a value of @ref SPI_Data_Size + * @retval None + */ +#define IS_SPI_DATASIZE(__DATASIZE__) (((__DATASIZE__) == SPI_DATASIZE_16BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_15BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_14BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_13BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_12BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_11BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_10BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_9BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_8BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_7BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_6BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_5BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_4BIT)) + +/** @brief Checks if SPI Serial clock steady state parameter is in allowed range. + * @param __CPOL__ specifies the SPI serial clock steady state. + * This parameter can be a value of @ref SPI_Clock_Polarity + * @retval None + */ +#define IS_SPI_CPOL(__CPOL__) (((__CPOL__) == SPI_POLARITY_LOW) || \ + ((__CPOL__) == SPI_POLARITY_HIGH)) + +/** @brief Checks if SPI Clock Phase parameter is in allowed range. + * @param __CPHA__ specifies the SPI Clock Phase. + * This parameter can be a value of @ref SPI_Clock_Phase + * @retval None + */ +#define IS_SPI_CPHA(__CPHA__) (((__CPHA__) == SPI_PHASE_1EDGE) || \ + ((__CPHA__) == SPI_PHASE_2EDGE)) + +/** @brief Checks if SPI Slave Select parameter is in allowed range. + * @param __NSS__ specifies the SPI Slave Select management parameter. + * This parameter can be a value of @ref SPI_Slave_Select_management + * @retval None + */ +#define IS_SPI_NSS(__NSS__) (((__NSS__) == SPI_NSS_SOFT) || \ + ((__NSS__) == SPI_NSS_HARD_INPUT) || \ + ((__NSS__) == SPI_NSS_HARD_OUTPUT)) + +/** @brief Checks if SPI NSS Pulse parameter is in allowed range. + * @param __NSSP__ specifies the SPI NSS Pulse Mode parameter. + * This parameter can be a value of @ref SPI_NSSP_Mode + * @retval None + */ +#define IS_SPI_NSSP(__NSSP__) (((__NSSP__) == SPI_NSS_PULSE_ENABLE) || \ + ((__NSSP__) == SPI_NSS_PULSE_DISABLE)) + +/** @brief Checks if SPI Baudrate prescaler parameter is in allowed range. + * @param __PRESCALER__ specifies the SPI Baudrate prescaler. + * This parameter can be a value of @ref SPI_BaudRate_Prescaler + * @retval None + */ +#define IS_SPI_BAUDRATE_PRESCALER(__PRESCALER__) (((__PRESCALER__) == SPI_BAUDRATEPRESCALER_2) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_4) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_8) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_16) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_32) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_64) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_128) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_256)) + +/** @brief Checks if SPI MSB LSB transmission parameter is in allowed range. + * @param __BIT__ specifies the SPI MSB LSB transmission (whether data transfer starts from MSB or LSB bit). + * This parameter can be a value of @ref SPI_MSB_LSB_transmission + * @retval None + */ +#define IS_SPI_FIRST_BIT(__BIT__) (((__BIT__) == SPI_FIRSTBIT_MSB) || \ + ((__BIT__) == SPI_FIRSTBIT_LSB)) + +/** @brief Checks if SPI TI mode parameter is in allowed range. + * @param __MODE__ specifies the SPI TI mode. + * This parameter can be a value of @ref SPI_TI_mode + * @retval None + */ +#define IS_SPI_TIMODE(__MODE__) (((__MODE__) == SPI_TIMODE_DISABLE) || \ + ((__MODE__) == SPI_TIMODE_ENABLE)) + +/** @brief Checks if SPI CRC calculation enabled state is in allowed range. + * @param __CALCULATION__ specifies the SPI CRC calculation enable state. + * This parameter can be a value of @ref SPI_CRC_Calculation + * @retval None + */ +#define IS_SPI_CRC_CALCULATION(__CALCULATION__) (((__CALCULATION__) == SPI_CRCCALCULATION_DISABLE) || \ + ((__CALCULATION__) == SPI_CRCCALCULATION_ENABLE)) + +/** @brief Checks if SPI CRC length is in allowed range. + * @param __LENGTH__ specifies the SPI CRC length. + * This parameter can be a value of @ref SPI_CRC_length + * @retval None + */ +#define IS_SPI_CRC_LENGTH(__LENGTH__) (((__LENGTH__) == SPI_CRC_LENGTH_DATASIZE) || \ + ((__LENGTH__) == SPI_CRC_LENGTH_8BIT) || \ + ((__LENGTH__) == SPI_CRC_LENGTH_16BIT)) + +/** @brief Checks if SPI polynomial value to be used for the CRC calculation, is in allowed range. + * @param __POLYNOMIAL__ specifies the SPI polynomial value to be used for the CRC calculation. + * This parameter must be a number between Min_Data = 0 and Max_Data = 65535 + * @retval None + */ +#define IS_SPI_CRC_POLYNOMIAL(__POLYNOMIAL__) (((__POLYNOMIAL__) >= 0x1U) && \ + ((__POLYNOMIAL__) <= 0xFFFFU) && \ + (((__POLYNOMIAL__)&0x1U) != 0U)) + +/** @brief Checks if DMA handle is valid. + * @param __HANDLE__ specifies a DMA Handle. + * @retval None + */ +#define IS_SPI_DMA_HANDLE(__HANDLE__) ((__HANDLE__) != NULL) + +/** + * @} + */ + +/* Include SPI HAL Extended module */ +#include "stm32g0xx_hal_spi_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPI_Exported_Functions + * @{ + */ + +/** @addtogroup SPI_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi); +void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi); +void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, + pSPI_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup SPI_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ***************************************************/ +HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); +HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi); + +void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** @addtogroup SPI_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi); +uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_SPI_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi_ex.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi_ex.h new file mode 100644 index 0000000..e1fdd71 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi_ex.h @@ -0,0 +1,73 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_spi_ex.h + * @author MCD Application Team + * @brief Header file of SPI HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_SPI_EX_H +#define STM32G0xx_HAL_SPI_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup SPIEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPIEx_Exported_Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/* IO operation functions *****************************************************/ +/** @addtogroup SPIEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(const SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_SPI_EX_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim.h new file mode 100644 index 0000000..44e276d --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim.h @@ -0,0 +1,2469 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_tim.h + * @author MCD Application Team + * @brief Header file of TIM HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_TIM_H +#define STM32G0xx_HAL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIM + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIM_Exported_Types TIM Exported Types + * @{ + */ + +/** + * @brief TIM Time base Configuration Structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_Counter_Mode */ + + uint32_t Period; /*!< Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_ClockDivision */ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + GP timers: this parameter must be a number between Min_Data = 0x00 and + Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and + Max_Data = 0xFFFF. */ + + uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload. + This parameter can be a value of @ref TIM_AutoReloadPreload */ +} TIM_Base_InitTypeDef; + +/** + * @brief TIM Output Compare Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCFastMode; /*!< Specifies the Fast mode state. + This parameter can be a value of @ref TIM_Output_Fast_State + @note This parameter is valid only in PWM1 and PWM2 mode. */ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ +} TIM_OC_InitTypeDef; + +/** + * @brief TIM One Pulse Mode Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_OnePulse_InitTypeDef; + +/** + * @brief TIM Input Capture Configuration Structure definition + */ +typedef struct +{ + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_IC_InitTypeDef; + +/** + * @brief TIM Encoder Configuration Structure definition + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Mode */ + + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC1Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC2Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC2Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_Encoder_InitTypeDef; + +/** + * @brief Clock Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClockSource; /*!< TIM clock sources + This parameter can be a value of @ref TIM_Clock_Source */ + uint32_t ClockPolarity; /*!< TIM clock polarity + This parameter can be a value of @ref TIM_Clock_Polarity */ + uint32_t ClockPrescaler; /*!< TIM clock prescaler + This parameter can be a value of @ref TIM_Clock_Prescaler */ + uint32_t ClockFilter; /*!< TIM clock filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClockConfigTypeDef; + +/** + * @brief TIM Clear Input Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClearInputState; /*!< TIM clear Input state + This parameter can be ENABLE or DISABLE */ + uint32_t ClearInputSource; /*!< TIM clear Input sources + This parameter can be a value of @ref TIM_ClearInput_Source */ + uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity + This parameter can be a value of @ref TIM_ClearInput_Polarity */ + uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler + This parameter must be 0: When OCRef clear feature is used with ETR source, + ETR prescaler must be off */ + uint32_t ClearInputFilter; /*!< TIM Clear Input filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClearInputConfigTypeDef; + +/** + * @brief TIM Master configuration Structure definition + * @note Advanced timers provide TRGO2 internal line which is redirected + * to the ADC + */ +typedef struct +{ + uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection */ + uint32_t MasterOutputTrigger2; /*!< Trigger output2 (TRGO2) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection_2 */ + uint32_t MasterSlaveMode; /*!< Master/slave mode selection + This parameter can be a value of @ref TIM_Master_Slave_Mode + @note When the Master/slave mode is enabled, the effect of + an event on the trigger input (TRGI) is delayed to allow a + perfect synchronization between the current timer and its + slaves (through TRGO). It is not mandatory in case of timer + synchronization mode. */ +} TIM_MasterConfigTypeDef; + +/** + * @brief TIM Slave configuration Structure definition + */ +typedef struct +{ + uint32_t SlaveMode; /*!< Slave mode selection + This parameter can be a value of @ref TIM_Slave_Mode */ + uint32_t InputTrigger; /*!< Input Trigger source + This parameter can be a value of @ref TIM_Trigger_Selection */ + uint32_t TriggerPolarity; /*!< Input Trigger polarity + This parameter can be a value of @ref TIM_Trigger_Polarity */ + uint32_t TriggerPrescaler; /*!< Input trigger prescaler + This parameter can be a value of @ref TIM_Trigger_Prescaler */ + uint32_t TriggerFilter; /*!< Input trigger filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + +} TIM_SlaveConfigTypeDef; + +/** + * @brief TIM Break input(s) and Dead time configuration Structure definition + * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable + * filter and polarity. + */ +typedef struct +{ + uint32_t OffStateRunMode; /*!< TIM off state in run mode, This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ + + uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode, This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ + + uint32_t LockLevel; /*!< TIM Lock level, This parameter can be a value of @ref TIM_Lock_level */ + + uint32_t DeadTime; /*!< TIM dead Time, This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + + uint32_t BreakState; /*!< TIM Break State, This parameter can be a value of @ref TIM_Break_Input_enable_disable */ + + uint32_t BreakPolarity; /*!< TIM Break input polarity, This parameter can be a value of @ref TIM_Break_Polarity */ + + uint32_t BreakFilter; /*!< Specifies the break input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t BreakAFMode; /*!< Specifies the alternate function mode of the break input.This parameter can be a value of @ref TIM_Break_Input_AF_Mode */ + + uint32_t Break2State; /*!< TIM Break2 State, This parameter can be a value of @ref TIM_Break2_Input_enable_disable */ + + uint32_t Break2Polarity; /*!< TIM Break2 input polarity, This parameter can be a value of @ref TIM_Break2_Polarity */ + + uint32_t Break2Filter; /*!< TIM break2 input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t Break2AFMode; /*!< Specifies the alternate function mode of the break2 input.This parameter can be a value of @ref TIM_Break2_Input_AF_Mode */ + + uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state, This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ + +} TIM_BreakDeadTimeConfigTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */ + HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ + HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ + HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ +} HAL_TIM_StateTypeDef; + +/** + * @brief TIM Channel States definition + */ +typedef enum +{ + HAL_TIM_CHANNEL_STATE_RESET = 0x00U, /*!< TIM Channel initial state */ + HAL_TIM_CHANNEL_STATE_READY = 0x01U, /*!< TIM Channel ready for use */ + HAL_TIM_CHANNEL_STATE_BUSY = 0x02U, /*!< An internal process is ongoing on the TIM channel */ +} HAL_TIM_ChannelStateTypeDef; + +/** + * @brief DMA Burst States definition + */ +typedef enum +{ + HAL_DMA_BURST_STATE_RESET = 0x00U, /*!< DMA Burst initial state */ + HAL_DMA_BURST_STATE_READY = 0x01U, /*!< DMA Burst ready for use */ + HAL_DMA_BURST_STATE_BUSY = 0x02U, /*!< Ongoing DMA Burst */ +} HAL_TIM_DMABurstStateTypeDef; + +/** + * @brief HAL Active channel structures definition + */ +typedef enum +{ + HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */ + HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */ + HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */ + HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */ + HAL_TIM_ACTIVE_CHANNEL_5 = 0x10U, /*!< The active channel is 5 */ + HAL_TIM_ACTIVE_CHANNEL_6 = 0x20U, /*!< The active channel is 6 */ + HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */ +} HAL_TIM_ActiveChannel; + +/** + * @brief TIM Time Base Handle Structure definition + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +typedef struct __TIM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +{ + TIM_TypeDef *Instance; /*!< Register base address */ + TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ + HAL_TIM_ActiveChannel Channel; /*!< Active channel */ + DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array + This array is accessed by a @ref DMA_Handle_index */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelState[6]; /*!< TIM channel operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelNState[4]; /*!< TIM complementary channel operation state */ + __IO HAL_TIM_DMABurstStateTypeDef DMABurstState; /*!< DMA burst operation state */ + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */ + void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */ + void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */ + void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */ + void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */ + void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */ + void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */ + void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */ + void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */ + void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */ + void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */ + void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */ + void (* HallSensor_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */ + void (* HallSensor_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */ + void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */ + void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed half complete Callback */ + void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */ + void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger half complete Callback */ + void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */ + void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture half complete Callback */ + void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */ + void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */ + void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback */ + void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */ + void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */ + void (* CommutationHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation half complete Callback */ + void (* BreakCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */ + void (* Break2Callback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break2 Callback */ +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} TIM_HandleTypeDef; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief HAL TIM Callback ID enumeration definition + */ +typedef enum +{ + HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ + , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ + , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ + , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ + , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ + , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ + , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ + , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ + , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ + , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ + , HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ + , HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ + , HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ + , HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ + , HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ + , HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ + , HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ + , HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */ + , HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ + , HAL_TIM_BREAK2_CB_ID = 0x1BU /*!< TIM Break2 Callback ID */ +} HAL_TIM_CallbackIDTypeDef; + +/** + * @brief HAL TIM Callback pointer definition + */ +typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to the TIM callback function */ + +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_ClearInput_Source TIM Clear Input Source + * @{ + */ +#define TIM_CLEARINPUTSOURCE_NONE 0x10000000U /*!< OCREF_CLR is disabled */ +#define TIM_CLEARINPUTSOURCE_ETR 0x20000000U /*!< OCREF_CLR is connected to ETRF input */ +#if defined(COMP1) && defined(COMP2) && defined(COMP3) +#define TIM_CLEARINPUTSOURCE_COMP1 0x00000000U /*!< OCREF_CLR_INT is connected to COMP1 output */ +#define TIM_CLEARINPUTSOURCE_COMP2 TIM1_OR1_OCREF_CLR_0 /*!< OCREF_CLR_INT is connected to COMP2 output */ +#define TIM_CLEARINPUTSOURCE_COMP3 TIM1_OR1_OCREF_CLR_1 /*!< OCREF_CLR_INT is connected to COMP3 output */ +#elif defined(COMP1) && defined(COMP2) +#define TIM_CLEARINPUTSOURCE_COMP1 0x00000000U /*!< OCREF_CLR_INT is connected to COMP1 output */ +#define TIM_CLEARINPUTSOURCE_COMP2 TIM1_OR1_OCREF_CLR /*!< OCREF_CLR_INT is connected to COMP2 output */ +#endif /* COMP1 && COMP2 && COMP3 */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Base_address TIM DMA Base Address + * @{ + */ +#define TIM_DMABASE_CR1 0x00000000U +#define TIM_DMABASE_CR2 0x00000001U +#define TIM_DMABASE_SMCR 0x00000002U +#define TIM_DMABASE_DIER 0x00000003U +#define TIM_DMABASE_SR 0x00000004U +#define TIM_DMABASE_EGR 0x00000005U +#define TIM_DMABASE_CCMR1 0x00000006U +#define TIM_DMABASE_CCMR2 0x00000007U +#define TIM_DMABASE_CCER 0x00000008U +#define TIM_DMABASE_CNT 0x00000009U +#define TIM_DMABASE_PSC 0x0000000AU +#define TIM_DMABASE_ARR 0x0000000BU +#define TIM_DMABASE_RCR 0x0000000CU +#define TIM_DMABASE_CCR1 0x0000000DU +#define TIM_DMABASE_CCR2 0x0000000EU +#define TIM_DMABASE_CCR3 0x0000000FU +#define TIM_DMABASE_CCR4 0x00000010U +#define TIM_DMABASE_BDTR 0x00000011U +#define TIM_DMABASE_DCR 0x00000012U +#define TIM_DMABASE_DMAR 0x00000013U +#define TIM_DMABASE_OR1 0x00000014U +#define TIM_DMABASE_CCMR3 0x00000015U +#define TIM_DMABASE_CCR5 0x00000016U +#define TIM_DMABASE_CCR6 0x00000017U +#define TIM_DMABASE_AF1 0x00000018U +#define TIM_DMABASE_AF2 0x00000019U +#define TIM_DMABASE_TISEL 0x0000001AU +/** + * @} + */ + +/** @defgroup TIM_Event_Source TIM Event Source + * @{ + */ +#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */ +#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */ +#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */ +#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */ +#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */ +#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */ +#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */ +#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */ +#define TIM_EVENTSOURCE_BREAK2 TIM_EGR_B2G /*!< A break 2 event is generated */ +/** + * @} + */ + +/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity + * @{ + */ +#define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_FALLING TIM_CCER_CC1P /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Polarity TIM ETR Polarity + * @{ + */ +#define TIM_ETRPOLARITY_INVERTED TIM_SMCR_ETP /*!< Polarity for ETR source */ +#define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler + * @{ + */ +#define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */ +#define TIM_ETRPRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR input source is divided by 2 */ +#define TIM_ETRPRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR input source is divided by 4 */ +#define TIM_ETRPRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR input source is divided by 8 */ +/** + * @} + */ + +/** @defgroup TIM_Counter_Mode TIM Counter Mode + * @{ + */ +#define TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as up-counter */ +#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as down-counter */ +#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 /*!< Center-aligned mode 1 */ +#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 /*!< Center-aligned mode 2 */ +#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS /*!< Center-aligned mode 3 */ +/** + * @} + */ + +/** @defgroup TIM_Update_Interrupt_Flag_Remap TIM Update Interrupt Flag Remap + * @{ + */ +#define TIM_UIFREMAP_DISABLE 0x00000000U /*!< Update interrupt flag remap disabled */ +#define TIM_UIFREMAP_ENABLE TIM_CR1_UIFREMAP /*!< Update interrupt flag remap enabled */ +/** + * @} + */ + +/** @defgroup TIM_ClockDivision TIM Clock Division + * @{ + */ +#define TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< Clock division: tDTS=tCK_INT */ +#define TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< Clock division: tDTS=2*tCK_INT */ +#define TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< Clock division: tDTS=4*tCK_INT */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_State TIM Output Compare State + * @{ + */ +#define TIM_OUTPUTSTATE_DISABLE 0x00000000U /*!< Capture/Compare 1 output disabled */ +#define TIM_OUTPUTSTATE_ENABLE TIM_CCER_CC1E /*!< Capture/Compare 1 output enabled */ +/** + * @} + */ + +/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload + * @{ + */ +#define TIM_AUTORELOAD_PRELOAD_DISABLE 0x00000000U /*!< TIMx_ARR register is not buffered */ +#define TIM_AUTORELOAD_PRELOAD_ENABLE TIM_CR1_ARPE /*!< TIMx_ARR register is buffered */ + +/** + * @} + */ + +/** @defgroup TIM_Output_Fast_State TIM Output Fast State + * @{ + */ +#define TIM_OCFAST_DISABLE 0x00000000U /*!< Output Compare fast disable */ +#define TIM_OCFAST_ENABLE TIM_CCMR1_OC1FE /*!< Output Compare fast enable */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State + * @{ + */ +#define TIM_OUTPUTNSTATE_DISABLE 0x00000000U /*!< OCxN is disabled */ +#define TIM_OUTPUTNSTATE_ENABLE TIM_CCER_CC1NE /*!< OCxN is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity + * @{ + */ +#define TIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */ +#define TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< Capture/Compare output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity + * @{ + */ +#define TIM_OCNPOLARITY_HIGH 0x00000000U /*!< Capture/Compare complementary output polarity */ +#define TIM_OCNPOLARITY_LOW TIM_CCER_CC1NP /*!< Capture/Compare complementary output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State + * @{ + */ +#define TIM_OCIDLESTATE_SET TIM_CR2_OIS1 /*!< Output Idle state: OCx=1 when MOE=0 */ +#define TIM_OCIDLESTATE_RESET 0x00000000U /*!< Output Idle state: OCx=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State + * @{ + */ +#define TIM_OCNIDLESTATE_SET TIM_CR2_OIS1N /*!< Complementary output Idle state: OCxN=1 when MOE=0 */ +#define TIM_OCNIDLESTATE_RESET 0x00000000U /*!< Complementary output Idle state: OCxN=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity + * @{ + */ +#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */ +#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */ +#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input*/ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity + * @{ + */ +#define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */ +#define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection + * @{ + */ +#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC2, IC1, IC4 or IC3, respectively */ +#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler + * @{ + */ +#define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */ +#define TIM_ICPSC_DIV2 TIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */ +#define TIM_ICPSC_DIV4 TIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */ +#define TIM_ICPSC_DIV8 TIM_CCMR1_IC1PSC /*!< Capture performed once every 8 events */ +/** + * @} + */ + +/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode + * @{ + */ +#define TIM_OPMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ +#define TIM_OPMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Mode TIM Encoder Mode + * @{ + */ +#define TIM_ENCODERMODE_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level */ +#define TIM_ENCODERMODE_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */ +#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */ +/** + * @} + */ + +/** @defgroup TIM_Interrupt_definition TIM interrupt Definition + * @{ + */ +#define TIM_IT_UPDATE TIM_DIER_UIE /*!< Update interrupt */ +#define TIM_IT_CC1 TIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt */ +#define TIM_IT_CC2 TIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt */ +#define TIM_IT_CC3 TIM_DIER_CC3IE /*!< Capture/Compare 3 interrupt */ +#define TIM_IT_CC4 TIM_DIER_CC4IE /*!< Capture/Compare 4 interrupt */ +#define TIM_IT_COM TIM_DIER_COMIE /*!< Commutation interrupt */ +#define TIM_IT_TRIGGER TIM_DIER_TIE /*!< Trigger interrupt */ +#define TIM_IT_BREAK TIM_DIER_BIE /*!< Break interrupt */ +/** + * @} + */ + +/** @defgroup TIM_Commutation_Source TIM Commutation Source + * @{ + */ +#define TIM_COMMUTATION_TRGI TIM_CR2_CCUS /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */ +#define TIM_COMMUTATION_SOFTWARE 0x00000000U /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */ +/** + * @} + */ + +/** @defgroup TIM_DMA_sources TIM DMA Sources + * @{ + */ +#define TIM_DMA_UPDATE TIM_DIER_UDE /*!< DMA request is triggered by the update event */ +#define TIM_DMA_CC1 TIM_DIER_CC1DE /*!< DMA request is triggered by the capture/compare macth 1 event */ +#define TIM_DMA_CC2 TIM_DIER_CC2DE /*!< DMA request is triggered by the capture/compare macth 2 event event */ +#define TIM_DMA_CC3 TIM_DIER_CC3DE /*!< DMA request is triggered by the capture/compare macth 3 event event */ +#define TIM_DMA_CC4 TIM_DIER_CC4DE /*!< DMA request is triggered by the capture/compare macth 4 event event */ +#define TIM_DMA_COM TIM_DIER_COMDE /*!< DMA request is triggered by the commutation event */ +#define TIM_DMA_TRIGGER TIM_DIER_TDE /*!< DMA request is triggered by the trigger event */ +/** + * @} + */ + +/** @defgroup TIM_CC_DMA_Request CCx DMA request selection + * @{ + */ +#define TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when capture or compare match event occurs */ +#define TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */ +/** + * @} + */ + +/** @defgroup TIM_Flag_definition TIM Flag Definition + * @{ + */ +#define TIM_FLAG_UPDATE TIM_SR_UIF /*!< Update interrupt flag */ +#define TIM_FLAG_CC1 TIM_SR_CC1IF /*!< Capture/Compare 1 interrupt flag */ +#define TIM_FLAG_CC2 TIM_SR_CC2IF /*!< Capture/Compare 2 interrupt flag */ +#define TIM_FLAG_CC3 TIM_SR_CC3IF /*!< Capture/Compare 3 interrupt flag */ +#define TIM_FLAG_CC4 TIM_SR_CC4IF /*!< Capture/Compare 4 interrupt flag */ +#define TIM_FLAG_CC5 TIM_SR_CC5IF /*!< Capture/Compare 5 interrupt flag */ +#define TIM_FLAG_CC6 TIM_SR_CC6IF /*!< Capture/Compare 6 interrupt flag */ +#define TIM_FLAG_COM TIM_SR_COMIF /*!< Commutation interrupt flag */ +#define TIM_FLAG_TRIGGER TIM_SR_TIF /*!< Trigger interrupt flag */ +#define TIM_FLAG_BREAK TIM_SR_BIF /*!< Break interrupt flag */ +#define TIM_FLAG_BREAK2 TIM_SR_B2IF /*!< Break 2 interrupt flag */ +#define TIM_FLAG_SYSTEM_BREAK TIM_SR_SBIF /*!< System Break interrupt flag */ +#define TIM_FLAG_CC1OF TIM_SR_CC1OF /*!< Capture 1 overcapture flag */ +#define TIM_FLAG_CC2OF TIM_SR_CC2OF /*!< Capture 2 overcapture flag */ +#define TIM_FLAG_CC3OF TIM_SR_CC3OF /*!< Capture 3 overcapture flag */ +#define TIM_FLAG_CC4OF TIM_SR_CC4OF /*!< Capture 4 overcapture flag */ +/** + * @} + */ + +/** @defgroup TIM_Channel TIM Channel + * @{ + */ +#define TIM_CHANNEL_1 0x00000000U /*!< Capture/compare channel 1 identifier */ +#define TIM_CHANNEL_2 0x00000004U /*!< Capture/compare channel 2 identifier */ +#define TIM_CHANNEL_3 0x00000008U /*!< Capture/compare channel 3 identifier */ +#define TIM_CHANNEL_4 0x0000000CU /*!< Capture/compare channel 4 identifier */ +#define TIM_CHANNEL_5 0x00000010U /*!< Compare channel 5 identifier */ +#define TIM_CHANNEL_6 0x00000014U /*!< Compare channel 6 identifier */ +#define TIM_CHANNEL_ALL 0x0000003CU /*!< Global Capture/compare channel identifier */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Source TIM Clock Source + * @{ + */ +#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */ +#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ +#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */ +#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ +#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ +#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ +#define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */ +#define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */ +#define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */ +#define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */ +#if defined(USB_BASE) +#define TIM_CLOCKSOURCE_ITR7 TIM_TS_ITR7 /*!< External clock source mode 1 (ITR7) */ +#endif /* USB_BASE */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Polarity TIM Clock Polarity + * @{ + */ +#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler + * @{ + */ +#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ +#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ +#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity + * @{ + */ +#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ +#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler + * @{ + */ +#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state + * @{ + */ +#define TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ + +/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state + * @{ + */ +#define TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ +/** @defgroup TIM_Lock_level TIM Lock level + * @{ + */ +#define TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF */ +#define TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ +#define TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ +#define TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ +/** + * @} + */ + +/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable + * @{ + */ +#define TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break input BRK is enabled */ +#define TIM_BREAK_DISABLE 0x00000000U /*!< Break input BRK is disabled */ +/** + * @} + */ + +/** @defgroup TIM_Break_Polarity TIM Break Input Polarity + * @{ + */ +#define TIM_BREAKPOLARITY_LOW 0x00000000U /*!< Break input BRK is active low */ +#define TIM_BREAKPOLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */ +/** + * @} + */ + +/** @defgroup TIM_Break_Input_AF_Mode TIM Break Input Alternate Function Mode + * @{ + */ +#define TIM_BREAK_AFMODE_INPUT 0x00000000U /*!< Break input BRK in input mode */ +#define TIM_BREAK_AFMODE_BIDIRECTIONAL TIM_BDTR_BKBID /*!< Break input BRK in bidirectional mode */ +/** + * @} + */ + +/** @defgroup TIM_Break2_Input_enable_disable TIM Break input 2 Enable + * @{ + */ +#define TIM_BREAK2_DISABLE 0x00000000U /*!< Break input BRK2 is disabled */ +#define TIM_BREAK2_ENABLE TIM_BDTR_BK2E /*!< Break input BRK2 is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Break2_Polarity TIM Break Input 2 Polarity + * @{ + */ +#define TIM_BREAK2POLARITY_LOW 0x00000000U /*!< Break input BRK2 is active low */ +#define TIM_BREAK2POLARITY_HIGH TIM_BDTR_BK2P /*!< Break input BRK2 is active high */ +/** + * @} + */ + +/** @defgroup TIM_Break2_Input_AF_Mode TIM Break2 Input Alternate Function Mode + * @{ + */ +#define TIM_BREAK2_AFMODE_INPUT 0x00000000U /*!< Break2 input BRK2 in input mode */ +#define TIM_BREAK2_AFMODE_BIDIRECTIONAL TIM_BDTR_BK2BID /*!< Break2 input BRK2 in bidirectional mode */ +/** + * @} + */ + +/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable + * @{ + */ +#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ +#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event (if none of the break inputs BRK and BRK2 is active) */ +/** + * @} + */ + +/** @defgroup TIM_Group_Channel5 TIM Group Channel 5 and Channel 1, 2 or 3 + * @{ + */ +#define TIM_GROUPCH5_NONE 0x00000000U /*!< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */ +#define TIM_GROUPCH5_OC1REFC TIM_CCR5_GC5C1 /*!< OC1REFC is the logical AND of OC1REFC and OC5REF */ +#define TIM_GROUPCH5_OC2REFC TIM_CCR5_GC5C2 /*!< OC2REFC is the logical AND of OC2REFC and OC5REF */ +#define TIM_GROUPCH5_OC3REFC TIM_CCR5_GC5C3 /*!< OC3REFC is the logical AND of OC3REFC and OC5REF */ +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection + * @{ + */ +#define TIM_TRGO_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO) */ +#define TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO) */ +#define TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1 (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output (TRGO) */ +#define TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output(TRGO) */ +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection_2 TIM Master Mode Selection 2 (TRGO2) + * @{ + */ +#define TIM_TRGO2_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO2) */ +#define TIM_TRGO2_ENABLE TIM_CR2_MMS2_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO2) */ +#define TIM_TRGO2_UPDATE TIM_CR2_MMS2_1 /*!< Update event is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC1 (TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC1REF TIM_CR2_MMS2_2 /*!< OC1REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC2REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC2REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC3REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1) /*!< OC3REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC4REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC4REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC5REF TIM_CR2_MMS2_3 /*!< OC5REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC6REF (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0) /*!< OC6REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC4REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1) /*!< OC4REF rising or falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC6REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC6REF rising or falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC4REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2) /*!< OC4REF or OC6REF rising edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC4REF rising or OC6REF falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC5REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */ +/** + * @} + */ + +/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode + * @{ + */ +#define TIM_MASTERSLAVEMODE_ENABLE TIM_SMCR_MSM /*!< No action */ +#define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U /*!< Master/slave mode is selected */ +/** + * @} + */ + +/** @defgroup TIM_Slave_Mode TIM Slave mode + * @{ + */ +#define TIM_SLAVEMODE_DISABLE 0x00000000U /*!< Slave mode disabled */ +#define TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode */ +#define TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode */ +#define TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode */ +#define TIM_SLAVEMODE_EXTERNAL1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1 */ +#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER TIM_SMCR_SMS_3 /*!< Combined reset + trigger mode */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes + * @{ + */ +#define TIM_OCMODE_TIMING 0x00000000U /*!< Frozen */ +#define TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!< Set channel to active level on match */ +#define TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!< Set channel to inactive level on match */ +#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< Toggle */ +#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!< PWM mode 1 */ +#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2 */ +#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!< Force active level */ +#define TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!< Force inactive level */ +#define TIM_OCMODE_RETRIGERRABLE_OPM1 TIM_CCMR1_OC1M_3 /*!< Retrigerrable OPM mode 1 */ +#define TIM_OCMODE_RETRIGERRABLE_OPM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0) /*!< Retrigerrable OPM mode 2 */ +#define TIM_OCMODE_COMBINED_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 1 */ +#define TIM_OCMODE_COMBINED_PWM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 2 */ +#define TIM_OCMODE_ASYMMETRIC_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2) /*!< Asymmetric PWM mode 1 */ +#define TIM_OCMODE_ASYMMETRIC_PWM2 TIM_CCMR1_OC1M /*!< Asymmetric PWM mode 2 */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Selection TIM Trigger Selection + * @{ + */ +#define TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) */ +#define TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) */ +#define TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) */ +#define TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) */ +#if defined(USB_BASE) +#define TIM_TS_ITR7 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_3) /*!< Internal Trigger 7 (ITR7) */ +#endif /* USB_BASE */ +#define TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) */ +#define TIM_TS_TI1FP1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 1 (TI1FP1) */ +#define TIM_TS_TI2FP2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 2 (TI2FP2) */ +#define TIM_TS_ETRF (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered External Trigger input (ETRF) */ +#define TIM_TS_NONE 0x0000FFFFU /*!< No trigger selected */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity + * @{ + */ +#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler + * @{ + */ +#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ +#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ +#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection + * @{ + */ +#define TIM_TI1SELECTION_CH1 0x00000000U /*!< The TIMx_CH1 pin is connected to TI1 input */ +#define TIM_TI1SELECTION_XORCOMBINATION TIM_CR2_TI1S /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length + * @{ + */ +#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +/** + * @} + */ + +/** @defgroup DMA_Handle_index TIM DMA Handle Index + * @{ + */ +#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */ +#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ +#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ +#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ +#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ +#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005) /*!< Index of the DMA handle used for Commutation DMA requests */ +#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */ +/** + * @} + */ + +/** @defgroup Channel_CC_State TIM Capture/Compare Channel State + * @{ + */ +#define TIM_CCx_ENABLE 0x00000001U /*!< Input or output channel is enabled */ +#define TIM_CCx_DISABLE 0x00000000U /*!< Input or output channel is disabled */ +#define TIM_CCxN_ENABLE 0x00000004U /*!< Complementary output channel is enabled */ +#define TIM_CCxN_DISABLE 0x00000000U /*!< Complementary output channel is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Break_System TIM Break System + * @{ + */ +#define TIM_BREAK_SYSTEM_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC error signal with Break Input of TIM1/15/16/17 */ +#define TIM_BREAK_SYSTEM_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection with TIM1/15/16/17 Break Input and also the PVDE and PLS bits of the Power Control Interface */ +#define TIM_BREAK_SYSTEM_SRAM_PARITY_ERROR SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIM1/15/16/17 */ +#define TIM_BREAK_SYSTEM_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM4 with Break Input of TIM1/15/16/17 */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup TIM_Exported_Macros TIM Exported Macros + * @{ + */ + +/** @brief Reset TIM handle state. + * @param __HANDLE__ TIM handle. + * @retval None + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[4] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[5] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + (__HANDLE__)->Base_MspInitCallback = NULL; \ + (__HANDLE__)->Base_MspDeInitCallback = NULL; \ + (__HANDLE__)->IC_MspInitCallback = NULL; \ + (__HANDLE__)->IC_MspDeInitCallback = NULL; \ + (__HANDLE__)->OC_MspInitCallback = NULL; \ + (__HANDLE__)->OC_MspDeInitCallback = NULL; \ + (__HANDLE__)->PWM_MspInitCallback = NULL; \ + (__HANDLE__)->PWM_MspDeInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[4] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[5] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + } while(0) +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @brief Enable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) + +/** + * @brief Enable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE)) + +/** + * @brief Disable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been + * disabled + */ +#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled unconditionally + */ +#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE) + +/** @brief Enable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to enable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) + +/** @brief Disable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to disable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) + +/** @brief Enable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to enable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) + +/** @brief Disable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to disable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) + +/** @brief Check whether the specified TIM interrupt flag is set or not. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to check. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_CC5: Compare 5 interrupt flag + * @arg TIM_FLAG_CC6: Compare 6 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag + * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified TIM interrupt flag. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to clear. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_CC5: Compare 5 interrupt flag + * @arg TIM_FLAG_CC6: Compare 6 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag + * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** + * @brief Check whether the specified TIM interrupt source is enabled or not. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the TIM interrupt source to check. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval The state of TIM_IT (SET or RESET). + */ +#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \ + == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Clear the TIM interrupt pending bits. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) + +/** + * @brief Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31). + * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read + * in an atomic way. + * @param __HANDLE__ TIM handle. + * @retval None +mode. + */ +#define __HAL_TIM_UIFREMAP_ENABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 |= TIM_CR1_UIFREMAP)) + +/** + * @brief Disable update interrupt flag (UIF) remapping. + * @param __HANDLE__ TIM handle. + * @retval None +mode. + */ +#define __HAL_TIM_UIFREMAP_DISABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 &= ~TIM_CR1_UIFREMAP)) + +/** + * @brief Get update interrupt flag (UIF) copy status. + * @param __COUNTER__ Counter value. + * @retval The state of UIFCPY (TRUE or FALSE). +mode. + */ +#define __HAL_TIM_GET_UIFCPY(__COUNTER__) (((__COUNTER__) & (TIM_CNT_UIFCPY)) == (TIM_CNT_UIFCPY)) + +/** + * @brief Indicates whether or not the TIM Counter is used as downcounter. + * @param __HANDLE__ TIM handle. + * @retval False (Counter used as upcounter) or True (Counter used as downcounter) + * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode + * or Encoder mode. + */ +#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR)) + +/** + * @brief Set the TIM Prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __PRESC__ specifies the Prescaler new value. + * @retval None + */ +#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) + +/** + * @brief Set the TIM Counter Register value on runtime. + * Note Please check if the bit 31 of CNT register is used as UIF copy or not, this may affect the counter range in + * case of 32 bits counter TIM instance. + * Bit 31 of CNT can be enabled/disabled using __HAL_TIM_UIFREMAP_ENABLE()/__HAL_TIM_UIFREMAP_DISABLE() macros. + * @param __HANDLE__ TIM handle. + * @param __COUNTER__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) + +/** + * @brief Get the TIM Counter Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT) + */ +#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT) + +/** + * @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __AUTORELOAD__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \ + do{ \ + (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ + (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ + } while(0) + +/** + * @brief Get the TIM Autoreload Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR) + */ +#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR) + +/** + * @brief Set the TIM Clock Division value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __CKD__ specifies the clock division value. + * This parameter can be one of the following value: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + * @retval None + */ +#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \ + do{ \ + (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD); \ + (__HANDLE__)->Instance->CR1 |= (__CKD__); \ + (__HANDLE__)->Init.ClockDivision = (__CKD__); \ + } while(0) + +/** + * @brief Get the TIM Clock Division value on runtime. + * @param __HANDLE__ TIM handle. + * @retval The clock division can be one of the following values: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + */ +#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) + +/** + * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() + * function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __ICPSC__ specifies the Input Capture4 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \ + do{ \ + TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ + } while(0) + +/** + * @brief Get the TIM Input Capture prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get input capture 1 prescaler value + * @arg TIM_CHANNEL_2: get input capture 2 prescaler value + * @arg TIM_CHANNEL_3: get input capture 3 prescaler value + * @arg TIM_CHANNEL_4: get input capture 4 prescaler value + * @retval The input capture prescaler can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + */ +#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ + (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U) + +/** + * @brief Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @param __COMPARE__ specifies the Capture Compare register new value. + * @retval None + */ +#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5 = (__COMPARE__)) :\ + ((__HANDLE__)->Instance->CCR6 = (__COMPARE__))) + +/** + * @brief Get the TIM Capture Compare Register value on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channel associated with the capture compare register + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get capture/compare 1 register value + * @arg TIM_CHANNEL_2: get capture/compare 2 register value + * @arg TIM_CHANNEL_3: get capture/compare 3 register value + * @arg TIM_CHANNEL_4: get capture/compare 4 register value + * @arg TIM_CHANNEL_5: get capture/compare 5 register value + * @arg TIM_CHANNEL_6: get capture/compare 6 register value + * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy) + */ +#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5) :\ + ((__HANDLE__)->Instance->CCR6)) + +/** + * @brief Set the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5PE) :\ + ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6PE)) + +/** + * @brief Reset the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5PE) :\ + ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6PE)) + +/** + * @brief Enable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @note When fast mode is enabled an active edge on the trigger input acts + * like a compare match on CCx output. Delay to sample the trigger + * input and to activate CCx output is reduced to 3 clock cycles. + * @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode. + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5FE) :\ + ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6FE)) + +/** + * @brief Disable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @note When fast mode is disabled CCx output behaves normally depending + * on counter and CCRx values even when the trigger is ON. The minimum + * delay to activate CCx output when an active edge occurs on the + * trigger input is 5 clock cycles. + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE) :\ + ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE)) + +/** + * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is set, only counter + * overflow/underflow generates an update interrupt or DMA request (if + * enabled) + * @retval None + */ +#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS) + +/** + * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is reset, any of the + * following events generate an update interrupt or DMA request (if + * enabled): + * _ Counter overflow underflow + * _ Setting the UG bit + * _ Update generation through the slave mode controller + * @retval None + */ +#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS) + +/** + * @brief Set the TIM Capture x input polarity on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __POLARITY__ Polarity for TIx source + * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge + * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge + * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge + * @retval None + */ +#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + do{ \ + TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ + }while(0) + +/** @brief Select the Capture/compare DMA request source. + * @param __HANDLE__ specifies the TIM Handle. + * @param __CCDMA__ specifies Capture/compare DMA request source + * This parameter can be one of the following values: + * @arg TIM_CCDMAREQUEST_CC: CCx DMA request generated on Capture/Compare event + * @arg TIM_CCDMAREQUEST_UPDATE: CCx DMA request generated on Update event + * @retval None + */ +#define __HAL_TIM_SELECT_CCDMAREQUEST(__HANDLE__, __CCDMA__) \ + MODIFY_REG((__HANDLE__)->Instance->CR2, TIM_CR2_CCDS, (__CCDMA__)) + +/** + * @} + */ +/* End of exported macros ----------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_Private_Constants TIM Private Constants + * @{ + */ +/* The counter of a timer instance is disabled only if all the CCx and CCxN + channels have been disabled */ +#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) +#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) +/** + * @} + */ +/* End of private constants --------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_Private_Macros TIM Private Macros + * @{ + */ +#if defined(COMP1) && defined(COMP2) && defined(COMP3) +#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_ETR) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_COMP1) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_COMP2) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_COMP3) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_NONE)) +#elif defined(COMP1) && defined(COMP2) +#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_ETR) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_COMP1) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_COMP2) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_NONE)) +#else +#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_ETR) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_NONE)) +#endif /* COMP1 && COMP2 && COMP3 */ + +#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \ + ((__BASE__) == TIM_DMABASE_CR2) || \ + ((__BASE__) == TIM_DMABASE_SMCR) || \ + ((__BASE__) == TIM_DMABASE_DIER) || \ + ((__BASE__) == TIM_DMABASE_SR) || \ + ((__BASE__) == TIM_DMABASE_EGR) || \ + ((__BASE__) == TIM_DMABASE_CCMR1) || \ + ((__BASE__) == TIM_DMABASE_CCMR2) || \ + ((__BASE__) == TIM_DMABASE_CCER) || \ + ((__BASE__) == TIM_DMABASE_CNT) || \ + ((__BASE__) == TIM_DMABASE_PSC) || \ + ((__BASE__) == TIM_DMABASE_ARR) || \ + ((__BASE__) == TIM_DMABASE_RCR) || \ + ((__BASE__) == TIM_DMABASE_CCR1) || \ + ((__BASE__) == TIM_DMABASE_CCR2) || \ + ((__BASE__) == TIM_DMABASE_CCR3) || \ + ((__BASE__) == TIM_DMABASE_CCR4) || \ + ((__BASE__) == TIM_DMABASE_BDTR) || \ + ((__BASE__) == TIM_DMABASE_OR1) || \ + ((__BASE__) == TIM_DMABASE_CCMR3) || \ + ((__BASE__) == TIM_DMABASE_CCR5) || \ + ((__BASE__) == TIM_DMABASE_CCR6) || \ + ((__BASE__) == TIM_DMABASE_AF1) || \ + ((__BASE__) == TIM_DMABASE_AF2) || \ + ((__BASE__) == TIM_DMABASE_TISEL)) + +#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFE00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \ + ((__MODE__) == TIM_COUNTERMODE_DOWN) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3)) + +#define IS_TIM_UIFREMAP_MODE(__MODE__) (((__MODE__) == TIM_UIFREMAP_DISABLE) || \ + ((__MODE__) == TIM_UIFREMAP_ENABLE)) + +#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV4)) + +#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \ + ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE)) + +#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \ + ((__STATE__) == TIM_OCFAST_ENABLE)) + +#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCPOLARITY_LOW)) + +#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCNPOLARITY_LOW)) + +#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCIDLESTATE_RESET)) + +#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCNIDLESTATE_RESET)) + +#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING)) + +#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE)) + +#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_TRC)) + +#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV2) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV4) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV8)) + +#define IS_TIM_CCX_CHANNEL(__INSTANCE__, __CHANNEL__) (IS_TIM_CCX_INSTANCE(__INSTANCE__, __CHANNEL__) && \ + ((__CHANNEL__) != (TIM_CHANNEL_5)) && \ + ((__CHANNEL__) != (TIM_CHANNEL_6))) + +#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \ + ((__MODE__) == TIM_OPMODE_REPETITIVE)) + +#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \ + ((__MODE__) == TIM_ENCODERMODE_TI2) || \ + ((__MODE__) == TIM_ENCODERMODE_TI12)) + +#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3) || \ + ((__CHANNEL__) == TIM_CHANNEL_4) || \ + ((__CHANNEL__) == TIM_CHANNEL_5) || \ + ((__CHANNEL__) == TIM_CHANNEL_6) || \ + ((__CHANNEL__) == TIM_CHANNEL_ALL)) + +#define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2)) + +#define IS_TIM_PERIOD(__HANDLE__, __PERIOD__) ((IS_TIM_32B_COUNTER_INSTANCE(((__HANDLE__)->Instance)) == 0U) ? \ + (((__PERIOD__) > 0U) && ((__PERIOD__) <= 0x0000FFFFU)) : \ + ((__PERIOD__) > 0U)) + +#define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3)) + +#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3)) + +#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE)) + +#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8)) + +#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) + +#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8)) + +#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \ + ((__STATE__) == TIM_OSSR_DISABLE)) + +#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \ + ((__STATE__) == TIM_OSSI_DISABLE)) + +#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_1) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_2) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_3)) + +#define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL) + +#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \ + ((__STATE__) == TIM_BREAK_DISABLE)) + +#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH)) + +#define IS_TIM_BREAK_AFMODE(__AFMODE__) (((__AFMODE__) == TIM_BREAK_AFMODE_INPUT) || \ + ((__AFMODE__) == TIM_BREAK_AFMODE_BIDIRECTIONAL)) + + +#define IS_TIM_BREAK2_STATE(__STATE__) (((__STATE__) == TIM_BREAK2_ENABLE) || \ + ((__STATE__) == TIM_BREAK2_DISABLE)) + +#define IS_TIM_BREAK2_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAK2POLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAK2POLARITY_HIGH)) + +#define IS_TIM_BREAK2_AFMODE(__AFMODE__) (((__AFMODE__) == TIM_BREAK2_AFMODE_INPUT) || \ + ((__AFMODE__) == TIM_BREAK2_AFMODE_BIDIRECTIONAL)) + + +#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \ + ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE)) + +#define IS_TIM_GROUPCH5(__OCREF__) ((((__OCREF__) & 0x1FFFFFFFU) == 0x00000000U)) + +#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \ + ((__SOURCE__) == TIM_TRGO_ENABLE) || \ + ((__SOURCE__) == TIM_TRGO_UPDATE) || \ + ((__SOURCE__) == TIM_TRGO_OC1) || \ + ((__SOURCE__) == TIM_TRGO_OC1REF) || \ + ((__SOURCE__) == TIM_TRGO_OC2REF) || \ + ((__SOURCE__) == TIM_TRGO_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO_OC4REF)) + +#define IS_TIM_TRGO2_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO2_RESET) || \ + ((__SOURCE__) == TIM_TRGO2_ENABLE) || \ + ((__SOURCE__) == TIM_TRGO2_UPDATE) || \ + ((__SOURCE__) == TIM_TRGO2_OC1) || \ + ((__SOURCE__) == TIM_TRGO2_OC1REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC2REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC6REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISINGFALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC6REF_RISINGFALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_RISING) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_RISING) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING)) + +#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \ + ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE)) + +#define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE) || \ + ((__MODE__) == TIM_SLAVEMODE_RESET) || \ + ((__MODE__) == TIM_SLAVEMODE_GATED) || \ + ((__MODE__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1) || \ + ((__MODE__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER)) + +#define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1) || \ + ((__MODE__) == TIM_OCMODE_PWM2) || \ + ((__MODE__) == TIM_OCMODE_COMBINED_PWM1) || \ + ((__MODE__) == TIM_OCMODE_COMBINED_PWM2) || \ + ((__MODE__) == TIM_OCMODE_ASYMMETRIC_PWM1) || \ + ((__MODE__) == TIM_OCMODE_ASYMMETRIC_PWM2)) + +#define IS_TIM_OC_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_TIMING) || \ + ((__MODE__) == TIM_OCMODE_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_TOGGLE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \ + ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM2)) + +#if defined(USB_BASE) +#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ETRF)) +#else +#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ETRF)) +#endif /* USB_BASE */ + +#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_NONE)) + +#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE )) + +#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8)) + +#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \ + ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION)) + +#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS)) + +#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U)) + +#define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU) + +#if defined(PWR_PVD_SUPPORT) +#define IS_TIM_BREAK_SYSTEM(__CONFIG__) (((__CONFIG__) == TIM_BREAK_SYSTEM_ECC) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_PVD) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_SRAM_PARITY_ERROR) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_LOCKUP)) +#else +#define IS_TIM_BREAK_SYSTEM(__CONFIG__) (((__CONFIG__) == TIM_BREAK_SYSTEM_ECC) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_SRAM_PARITY_ERROR) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_LOCKUP)) +#endif /* PWR_PVD_SUPPORT */ + +#define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) (((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__TRIGGER__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER)) + +#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ + ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U))) + +#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC)) + +#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\ + ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U)))) + +#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ + ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP))) + +#define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelState[2] :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? (__HANDLE__)->ChannelState[3] :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? (__HANDLE__)->ChannelState[4] :\ + (__HANDLE__)->ChannelState[5]) + +#define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->ChannelState[4] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelState[5] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelState[0] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[1] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[2] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[3] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[4] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[5] = \ + (__CHANNEL_STATE__); \ + } while(0) + +#define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\ + (__HANDLE__)->ChannelNState[3]) + +#define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelNState[0] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[1] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[2] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[3] = \ + (__CHANNEL_STATE__); \ + } while(0) + +/** + * @} + */ +/* End of private macros -----------------------------------------------------*/ + +/* Include TIM HAL Extended module */ +#include "stm32g0xx_hal_tim_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * @{ + */ +/* Time Base functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, const uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * @{ + */ +/* Timer Output Compare functions *********************************************/ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * @{ + */ +/* Timer PWM functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * @{ + */ +/* Timer Input Capture functions **********************************************/ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * @{ + */ +/* Timer One Pulse functions **************************************************/ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * @{ + */ +/* Timer Encoder functions ****************************************************/ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, const TIM_Encoder_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief IRQ handler management + * @{ + */ +/* Interrupt Handler functions ***********************************************/ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Control functions *********************************************************/ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_IC_InitTypeDef *sConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel); +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, + const TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, const TIM_ClockConfigTypeDef *sClockSourceConfig); +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); +uint32_t HAL_TIM_ReadCapturedValue(const TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * @{ + */ +/* Callback in non blocking modes (Interrupt and DMA) *************************/ +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief Peripheral State functions + * @{ + */ +/* Peripheral State functions ************************************************/ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(const TIM_HandleTypeDef *htim); + +/* Peripheral Channel state functions ************************************************/ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(const TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(const TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(const TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, const TIM_Base_InitTypeDef *Structure); +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); + +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_DMAError(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +void TIM_ResetCallback(TIM_HandleTypeDef *htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_TIM_H */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim_ex.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim_ex.h new file mode 100644 index 0000000..a157ec5 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim_ex.h @@ -0,0 +1,494 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_tim_ex.h + * @author MCD Application Team + * @brief Header file of TIM HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_TIM_EX_H +#define STM32G0xx_HAL_TIM_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIMEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types + * @{ + */ + +/** + * @brief TIM Hall sensor Configuration Structure definition + */ + +typedef struct +{ + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ +} TIM_HallSensor_InitTypeDef; + +/** + * @brief TIM Break/Break2 input configuration + */ +typedef struct +{ + uint32_t Source; /*!< Specifies the source of the timer break input. + This parameter can be a value of @ref TIMEx_Break_Input_Source */ + uint32_t Enable; /*!< Specifies whether or not the break input source is enabled. + This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */ + uint32_t Polarity; /*!< Specifies the break input source polarity. + This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity */ +} TIMEx_BreakInputConfigTypeDef; + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants + * @{ + */ + +/** @defgroup TIMEx_Remap TIM Extended Remapping + * @{ + */ +#define TIM_TIM1_ETR_GPIO 0x00000000U /*!< TIM1_ETR is connected to GPIO */ +#if defined(COMP1) && defined(COMP2) +#define TIM_TIM1_ETR_COMP1 TIM1_AF1_ETRSEL_0 /*!< TIM1_ETR is connected to COMP1 output */ +#define TIM_TIM1_ETR_COMP2 TIM1_AF1_ETRSEL_1 /*!< TIM1_ETR is connected to COMP2 output */ +#endif /* COMP1 && COMP2 */ +#define TIM_TIM1_ETR_ADC1_AWD1 (TIM1_AF1_ETRSEL_1 | TIM1_AF1_ETRSEL_0) /*!< TIM1_ETR is connected to ADC1 AWD1 */ +#define TIM_TIM1_ETR_ADC1_AWD2 TIM1_AF1_ETRSEL_2 /*!< TIM1_ETR is connected to ADC1 AWD2 */ +#define TIM_TIM1_ETR_ADC1_AWD3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_0) /*!< TIM1_ETR is connected to ADC1 AWD3 */ +#if defined(COMP3) +#define TIM_TIM1_ETR_COMP3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1) /*!< TIM1_ETR is connected to COMP3 output */ +#endif /* COMP3 */ +#if defined(TIM2) +#define TIM_TIM2_ETR_GPIO 0x00000000U /*!< TIM2_ETR is connected to GPIO */ +#define TIM_TIM2_ETR_COMP1 TIM2_AF1_ETRSEL_0 /*!< TIM2_ETR is connected to COMP1 output */ +#define TIM_TIM2_ETR_COMP2 TIM2_AF1_ETRSEL_1 /*!< TIM2_ETR is connected to COMP2 output */ +#define TIM_TIM2_ETR_LSE (TIM2_AF1_ETRSEL_1 | TIM2_AF1_ETRSEL_0) /*!< TIM2_ETR is connected to LSE */ +#if defined(COMP3) +#define TIM_TIM2_ETR_MCO TIM2_AF1_ETRSEL_2 /*!< TIM2_ETR is connected to MCO */ +#define TIM_TIM2_ETR_MCO2 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_0) /*!< TIM2_ETR is connected to MCO2 */ +#define TIM_TIM2_ETR_COMP3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1) /*!< TIM2_ETR is connected to COMP3 output */ +#endif /* COMP3 */ +#endif /* TIM2 */ +#if defined(TIM3) +#define TIM_TIM3_ETR_GPIO 0x00000000U /*!< TIM3_ETR is connected to GPIO */ +#if defined(COMP1) && defined(COMP2) +#define TIM_TIM3_ETR_COMP1 TIM3_AF1_ETRSEL_0 /*!< TIM3_ETR is connected to COMP1 output */ +#define TIM_TIM3_ETR_COMP2 TIM3_AF1_ETRSEL_1 /*!< TIM3_ETR is connected to COMP2 output */ +#endif /* COMP1 && COMP2 */ +#if defined(COMP3) +#define TIM_TIM3_ETR_COMP3 (TIM3_AF1_ETRSEL_1 | TIM3_AF1_ETRSEL_0) /*!< TIM3_ETR is connected to COMP3 output */ +#endif /* COMP3 */ +#endif /* TIM3 */ +#if defined(TIM4) +#define TIM_TIM4_ETR_GPIO 0x00000000U /*!< TIM4_ETR is connected to GPIO */ +#if defined(COMP1) && defined(COMP2) +#define TIM_TIM4_ETR_COMP1 TIM4_AF1_ETRSEL_0 /*!< TIM4_ETR is connected to COMP1 output */ +#define TIM_TIM4_ETR_COMP2 TIM4_AF1_ETRSEL_1 /*!< TIM4_ETR is connected to COMP2 output */ +#endif /* COMP1 && COMP2 */ +#if defined(COMP3) +#define TIM_TIM4_ETR_COMP3 (TIM4_AF1_ETRSEL_1 | TIM4_AF1_ETRSEL_0) /*!< TIM4_ETR is connected to COMP3 output */ +#endif /* COMP3 */ +#endif /* TIM4 */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input TIM Extended Break input + * @{ + */ +#define TIM_BREAKINPUT_BRK 0x00000001U /*!< Timer break input */ +#define TIM_BREAKINPUT_BRK2 0x00000002U /*!< Timer break2 input */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source + * @{ + */ +#define TIM_BREAKINPUTSOURCE_BKIN 0x00000001U /*!< An external source (GPIO) is connected to the BKIN pin */ +#if defined(COMP1) && defined(COMP2) +#define TIM_BREAKINPUTSOURCE_COMP1 0x00000002U /*!< The COMP1 output is connected to the break input */ +#define TIM_BREAKINPUTSOURCE_COMP2 0x00000004U /*!< The COMP2 output is connected to the break input */ +#endif /* COMP1 && COMP2 */ +#if defined(COMP3) +#define TIM_BREAKINPUTSOURCE_COMP3 0x00000008U /*!< The COMP3 output is connected to the break input */ +#endif /* COMP3 */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling + * @{ + */ +#define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /*!< Break input source is disabled */ +#define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /*!< Break input source is enabled */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity + * @{ + */ +#define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /*!< Break input source is active low */ +#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /*!< Break input source is active_high */ +/** + * @} + */ + +/** @defgroup TIMEx_Timer_Input_Selection TIM Extended Timer input selection + * @{ + */ +#define TIM_TIM1_TI1_GPIO 0x00000000U /*!< TIM1_TI1 is connected to GPIO */ +#if defined(COMP1) +#define TIM_TIM1_TI1_COMP1 0x00000001U /*!< TIM1_TI1 is connected to COMP1 OUT */ +#endif /* COMP1 */ + +#define TIM_TIM1_TI2_GPIO 0x00000000U /*!< TIM1_TI2 is connected to GPIO */ +#if defined(COMP2) +#define TIM_TIM1_TI2_COMP2 0x00000100U /*!< TIM1_TI2 is connected to COMP2 OUT */ +#endif /* COMP2 */ + +#define TIM_TIM1_TI3_GPIO 0x00000000U /*!< TIM1_TI3 is connected to GPIO */ +#if defined(COMP3) +#define TIM_TIM1_TI3_COMP3 0x00010000U /*!< TIM1_TI3 is connected to COMP3 OUT */ +#endif /* COMP3 */ + +#if defined(TIM2) +#define TIM_TIM2_TI1_GPIO 0x00000000U /*!< TIM2_TI1 is connected to GPIO */ +#define TIM_TIM2_TI1_COMP1 0x00000001U /*!< TIM2_TI1 is connected to COMP1 OUT */ + +#define TIM_TIM2_TI2_GPIO 0x00000000U /*!< TIM2_TI2 is connected to GPIO */ +#define TIM_TIM2_TI2_COMP2 0x00000100U /*!< TIM2_TI2 is connected to COMP2 OUT */ + +#define TIM_TIM2_TI3_GPIO 0x00000000U /*!< TIM2_TI3 is connected to GPIO */ +#if defined(COMP3) +#define TIM_TIM2_TI3_COMP3 0x00010000U /*!< TIM2_TI3 is connected to COMP3 OUT */ +#endif /* COMP3 */ +#endif /* TIM2 */ + +#define TIM_TIM3_TI1_GPIO 0x00000000U /*!< TIM3_TI1 is connected to GPIO */ +#if defined(COMP1) +#define TIM_TIM3_TI1_COMP1 0x00000001U /*!< TIM3_TI1 is connected to COMP1 OUT */ +#endif /* COMP1 */ + +#define TIM_TIM3_TI2_GPIO 0x00000000U /*!< TIM3_TI2 is connected to GPIO */ +#if defined(COMP2) +#define TIM_TIM3_TI2_COMP2 0x00000100U /*!< TIM3_TI2 is connected to COMP2 OUT */ +#endif /* COMP2 */ + +#define TIM_TIM3_TI3_GPIO 0x00000000U /*!< TIM3_TI3 is connected to GPIO */ +#if defined(COMP3) +#define TIM_TIM3_TI3_COMP3 0x00010000U /*!< TIM3_TI3 is connected to COMP3 OUT */ +#endif /* COMP3 */ + +#if defined(TIM4) +#define TIM_TIM4_TI1_GPIO 0x00000000U /*!< TIM4_TI1 is connected to GPIO */ +#if defined(COMP1) +#define TIM_TIM4_TI1_COMP1 0x00000001U /*!< TIM4_TI1 is connected to COMP1 OUT */ +#endif /* COMP1 */ + +#define TIM_TIM4_TI2_GPIO 0x00000000U /*!< TIM4_TI2 is connected to GPIO */ +#if defined(COMP2) +#define TIM_TIM4_TI2_COMP2 0x00000100U /*!< TIM4_TI2 is connected to COMP2 OUT */ +#endif /* COMP2 */ + +#define TIM_TIM4_TI3_GPIO 0x00000000U /*!< TIM4_TI3 is connected to GPIO */ +#if defined(COMP3) +#define TIM_TIM4_TI3_COMP3 0x00010000U /*!< TIM4_TI3 is connected to COMP3 OUT */ +#endif /* COMP3 */ +#endif /* TIM4 */ + +#define TIM_TIM14_TI1_GPIO 0x00000000U /*!< TIM14_TI1 is connected to GPIO */ +#define TIM_TIM14_TI1_RTC 0x00000001U /*!< TIM14_TI1 is connected to RTC clock */ +#define TIM_TIM14_TI1_HSE_32 0x00000002U /*!< TIM14_TI1 is connected to HSE div 32 */ +#define TIM_TIM14_TI1_MCO 0x00000003U /*!< TIM14_TI1 is connected to MCO */ +#if defined(RCC_MCO2_SUPPORT) +#define TIM_TIM14_TI1_MCO2 0x00000004U /*!< TIM14_TI1 is connected to MCO2 */ +#endif /* RCC_MCO2_SUPPORT */ + +#if defined(TIM15) +#define TIM_TIM15_TI1_GPIO 0x00000000U /*!< TIM15_TI1 is connected to GPIO */ +#define TIM_TIM15_TI1_TIM2_CH1 0x00000001U /*!< TIM15_TI1 is connected to TIM2 CH1 */ +#define TIM_TIM15_TI1_TIM3_CH1 0x00000002U /*!< TIM15_TI1 is connected to TIM3 CH1 */ + +#define TIM_TIM15_TI2_GPIO 0x00000000U /*!< TIM15_TI2 is connected to GPIO */ +#define TIM_TIM15_TI2_TIM2_CH2 0x00000100U /*!< TIM15_TI2 is connected to TIM2 CH2 */ +#define TIM_TIM15_TI2_TIM3_CH2 0x00000200U /*!< TIM15_TI2 is connected to TIM3 CH2 */ +#endif /* TIM15 */ + +#define TIM_TIM16_TI1_GPIO 0x00000000U /*!< TIM16_TI1 is connected to GPIO */ +#define TIM_TIM16_TI1_LSI 0x00000001U /*!< TIM16_TI1 is connected to LSI */ +#define TIM_TIM16_TI1_LSE 0x00000002U /*!< TIM16_TI1 is connected to LSE */ +#define TIM_TIM16_TI1_RTC_WAKEUP 0x00000003U /*!< TIM16_TI1 is connected to TRC wakeup interrupt */ +#if defined(RCC_MCO2_SUPPORT) +#define TIM_TIM16_TI1_MCO2 0x00000004U /*!< TIM16_TI1 is connected to MCO2 */ +#endif /* RCC_MCO2_SUPPORT */ + +#define TIM_TIM17_TI1_GPIO 0x00000000U /*!< TIM17_TI1 is connected to GPIO */ +#if defined(RCC_HSI48_SUPPORT) +#define TIM_TIM17_TI1_HSI48 0x00000001U /*!< TIM17_TI1 is connected to HSI48/256 */ +#endif /* RCC_HSI48_SUPPORT */ +#define TIM_TIM17_TI1_HSE_32 0x00000002U /*!< TIM17_TI1 is connected to HSE div 32 */ +#define TIM_TIM17_TI1_MCO 0x00000003U /*!< TIM17_TI1 is connected to MCO */ +#if defined(RCC_MCO2_SUPPORT) +#define TIM_TIM17_TI1_MCO2 0x00000004U /*!< TIM17_TI1 is connected to MCO2 */ +#endif /* RCC_MCO2_SUPPORT */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros + * @{ + */ + +/** + * @} + */ +/* End of exported macro -----------------------------------------------------*/ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros + * @{ + */ +#define IS_TIM_REMAP(__REMAP__) ((((__REMAP__) & 0xFFFC3FFFU) == 0x00000000U)) + +#define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \ + ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2)) + +#if defined(COMP1) && defined(COMP2) && defined(COMP3) +#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP3)) +#elif defined(COMP1) && defined(COMP2) +#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2)) +#else +#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) ((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) +#endif /* COMP1 && COMP2 && COMP3 */ + +#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \ + ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE)) + +#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH)) + +#define IS_TIM_TISEL(__TISEL__) ((((__TISEL__) & 0xF0F0F0F0U) == 0x00000000U)) + +/** + * @} + */ +/* End of private macro ------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * @{ + */ +/* Timer Hall Sensor functions **********************************************/ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, const TIM_HallSensor_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); + +void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim); + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * @{ + */ +/* Timer Complementary Output Compare functions *****************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * @{ + */ +/* Timer Complementary PWM functions ****************************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * @{ + */ +/* Timer Complementary One Pulse functions **********************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Extended Control functions ************************************************/ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + const TIM_MasterConfigTypeDef *sMasterConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + const TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput, + const TIMEx_BreakInputConfigTypeDef *sBreakInputConfig); +HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels); +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); +HAL_StatusTypeDef HAL_TIMEx_TISelection(TIM_HandleTypeDef *htim, uint32_t TISelection, uint32_t Channel); + +HAL_StatusTypeDef HAL_TIMEx_DisarmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput); +HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(const TIM_HandleTypeDef *htim, uint32_t BreakInput); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * @{ + */ +/* Extended Callback **********************************************************/ +void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * @{ + */ +/* Extended Peripheral State functions ***************************************/ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(const TIM_HandleTypeDef *htim, uint32_t ChannelN); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @addtogroup TIMEx_Private_Functions TIM Extended Private Functions + * @{ + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma); +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32G0xx_HAL_TIM_EX_H */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart.h new file mode 100644 index 0000000..e8f3c25 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart.h @@ -0,0 +1,1745 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_uart.h + * @author MCD Application Team + * @brief Header file of UART HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_UART_H +#define STM32G0xx_HAL_UART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup UART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UART_Exported_Types UART Exported Types + * @{ + */ + +/** + * @brief UART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the UART communication baud rate. + The baud rate register is computed using the following formula: + LPUART: + ======= + Baud Rate Register = ((256 * lpuart_ker_ckpres) / ((huart->Init.BaudRate))) + where lpuart_ker_ck_pres is the UART input clock divided by a prescaler + UART: + ===== + - If oversampling is 16 or in LIN mode, + Baud Rate Register = ((uart_ker_ckpres) / ((huart->Init.BaudRate))) + - If oversampling is 8, + Baud Rate Register[15:4] = ((2 * uart_ker_ckpres) / + ((huart->Init.BaudRate)))[15:4] + Baud Rate Register[3] = 0 + Baud Rate Register[2:0] = (((2 * uart_ker_ckpres) / + ((huart->Init.BaudRate)))[3:0]) >> 1 + where uart_ker_ck_pres is the UART input clock divided by a prescaler */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref UARTEx_Word_Length. */ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref UART_Stop_Bits. */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref UART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref UART_Mode. */ + + uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled + or disabled. + This parameter can be a value of @ref UART_Hardware_Flow_Control. */ + + uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, + to achieve higher speed (up to f_PCLK/8). + This parameter can be a value of @ref UART_Over_Sampling. */ + + uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected. + Selecting the single sample method increases the receiver tolerance to clock + deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */ + + uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the UART clock source. + This parameter can be a value of @ref UART_ClockPrescaler. */ + +} UART_InitTypeDef; + +/** + * @brief UART Advanced Features initialization structure definition + */ +typedef struct +{ + uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several + Advanced Features may be initialized at the same time . + This parameter can be a value of + @ref UART_Advanced_Features_Initialization_Type. */ + + uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. + This parameter can be a value of @ref UART_Tx_Inv. */ + + uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. + This parameter can be a value of @ref UART_Rx_Inv. */ + + uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic + vs negative/inverted logic). + This parameter can be a value of @ref UART_Data_Inv. */ + + uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. + This parameter can be a value of @ref UART_Rx_Tx_Swap. */ + + uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. + This parameter can be a value of @ref UART_Overrun_Disable. */ + + uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. + This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error. */ + + uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled. + This parameter can be a value of @ref UART_AutoBaudRate_Enable. */ + + uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate + detection is carried out. + This parameter can be a value of @ref UART_AutoBaud_Rate_Mode. */ + + uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. + This parameter can be a value of @ref UART_MSB_First. */ +} UART_AdvFeatureInitTypeDef; + +/** + * @brief HAL UART State definition + * @note HAL UART State value is a combination of 2 different substates: + * gState and RxState (see @ref UART_State_Definition). + * - gState contains UART state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized. HAL UART Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (Peripheral busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef uint32_t HAL_UART_StateTypeDef; + +/** + * @brief UART clock sources definition + */ +typedef enum +{ + UART_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ + UART_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ + UART_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ + UART_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */ + UART_CLOCKSOURCE_UNDEFINED = 0x10U /*!< Undefined clock source */ +} UART_ClockSourceTypeDef; + +/** + * @brief HAL UART Reception type definition + * @note HAL UART Reception type value aims to identify which type of Reception is ongoing. + * This parameter can be a value of @ref UART_Reception_Type_Values : + * HAL_UART_RECEPTION_STANDARD = 0x00U, + * HAL_UART_RECEPTION_TOIDLE = 0x01U, + * HAL_UART_RECEPTION_TORTO = 0x02U, + * HAL_UART_RECEPTION_TOCHARMATCH = 0x03U, + */ +typedef uint32_t HAL_UART_RxTypeTypeDef; + +/** + * @brief HAL UART Rx Event type definition + * @note HAL UART Rx Event type value aims to identify which type of Event has occurred + * leading to call of the RxEvent callback. + * This parameter can be a value of @ref UART_RxEvent_Type_Values : + * HAL_UART_RXEVENT_TC = 0x00U, + * HAL_UART_RXEVENT_HT = 0x01U, + * HAL_UART_RXEVENT_IDLE = 0x02U, + */ +typedef uint32_t HAL_UART_RxEventTypeTypeDef; + +/** + * @brief UART handle Structure definition + */ +typedef struct __UART_HandleTypeDef +{ + USART_TypeDef *Instance; /*!< UART registers base address */ + + UART_InitTypeDef Init; /*!< UART communication parameters */ + + UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< UART Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< UART Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */ + + uint16_t Mask; /*!< UART Rx RDR register mask */ + + uint32_t FifoMode; /*!< Specifies if the FIFO mode is being used. + This parameter can be a value of @ref UARTEx_FIFO_mode. */ + + uint16_t NbRxDataToProcess; /*!< Number of data to process during RX ISR execution */ + + uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */ + + __IO HAL_UART_RxTypeTypeDef ReceptionType; /*!< Type of ongoing reception */ + + __IO HAL_UART_RxEventTypeTypeDef RxEventType; /*!< Type of Rx Event */ + + void (*RxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ + + void (*TxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ + + DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management + and also related to Tx operations. This parameter + can be a value of @ref HAL_UART_StateTypeDef */ + + __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations. This + parameter can be a value of @ref HAL_UART_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< UART Error code */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + void (* TxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Half Complete Callback */ + void (* TxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Complete Callback */ + void (* RxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Half Complete Callback */ + void (* RxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Complete Callback */ + void (* ErrorCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Error Callback */ + void (* AbortCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Complete Callback */ + void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */ + void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Receive Complete Callback */ + void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */ + void (* RxFifoFullCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Fifo Full Callback */ + void (* TxFifoEmptyCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Fifo Empty Callback */ + void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback */ + + void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */ + void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +} UART_HandleTypeDef; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief HAL UART Callback ID enumeration definition + */ +typedef enum +{ + HAL_UART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< UART Tx Half Complete Callback ID */ + HAL_UART_TX_COMPLETE_CB_ID = 0x01U, /*!< UART Tx Complete Callback ID */ + HAL_UART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< UART Rx Half Complete Callback ID */ + HAL_UART_RX_COMPLETE_CB_ID = 0x03U, /*!< UART Rx Complete Callback ID */ + HAL_UART_ERROR_CB_ID = 0x04U, /*!< UART Error Callback ID */ + HAL_UART_ABORT_COMPLETE_CB_ID = 0x05U, /*!< UART Abort Complete Callback ID */ + HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< UART Abort Transmit Complete Callback ID */ + HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< UART Abort Receive Complete Callback ID */ + HAL_UART_WAKEUP_CB_ID = 0x08U, /*!< UART Wakeup Callback ID */ + HAL_UART_RX_FIFO_FULL_CB_ID = 0x09U, /*!< UART Rx Fifo Full Callback ID */ + HAL_UART_TX_FIFO_EMPTY_CB_ID = 0x0AU, /*!< UART Tx Fifo Empty Callback ID */ + + HAL_UART_MSPINIT_CB_ID = 0x0BU, /*!< UART MspInit callback ID */ + HAL_UART_MSPDEINIT_CB_ID = 0x0CU /*!< UART MspDeInit callback ID */ + +} HAL_UART_CallbackIDTypeDef; + +/** + * @brief HAL UART Callback pointer definition + */ +typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */ +typedef void (*pUART_RxEventCallbackTypeDef) +(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */ + +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UART_Exported_Constants UART Exported Constants + * @{ + */ + +/** @defgroup UART_State_Definition UART State Code Definition + * @{ + */ +#define HAL_UART_STATE_RESET 0x00000000U /*!< Peripheral is not initialized + Value is allowed for gState and RxState */ +#define HAL_UART_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ +#define HAL_UART_STATE_BUSY 0x00000024U /*!< an internal process is ongoing + Value is allowed for gState only */ +#define HAL_UART_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing + Value is allowed for gState only */ +#define HAL_UART_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing + Value is allowed for RxState only */ +#define HAL_UART_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing + Not to be used for neither gState nor RxState.Value is result + of combination (Or) between gState and RxState values */ +#define HAL_UART_STATE_TIMEOUT 0x000000A0U /*!< Timeout state + Value is allowed for gState only */ +#define HAL_UART_STATE_ERROR 0x000000E0U /*!< Error + Value is allowed for gState only */ +/** + * @} + */ + +/** @defgroup UART_Error_Definition UART Error Definition + * @{ + */ +#define HAL_UART_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_UART_ERROR_PE (0x00000001U) /*!< Parity error */ +#define HAL_UART_ERROR_NE (0x00000002U) /*!< Noise error */ +#define HAL_UART_ERROR_FE (0x00000004U) /*!< Frame error */ +#define HAL_UART_ERROR_ORE (0x00000008U) /*!< Overrun error */ +#define HAL_UART_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_UART_ERROR_RTO (0x00000020U) /*!< Receiver Timeout error */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define HAL_UART_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup UART_Stop_Bits UART Number of Stop Bits + * @{ + */ +#define UART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< UART frame with 0.5 stop bit */ +#define UART_STOPBITS_1 0x00000000U /*!< UART frame with 1 stop bit */ +#define UART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< UART frame with 1.5 stop bits */ +#define UART_STOPBITS_2 USART_CR2_STOP_1 /*!< UART frame with 2 stop bits */ +/** + * @} + */ + +/** @defgroup UART_Parity UART Parity + * @{ + */ +#define UART_PARITY_NONE 0x00000000U /*!< No parity */ +#define UART_PARITY_EVEN USART_CR1_PCE /*!< Even parity */ +#define UART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */ +/** + * @} + */ + +/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control + * @{ + */ +#define UART_HWCONTROL_NONE 0x00000000U /*!< No hardware control */ +#define UART_HWCONTROL_RTS USART_CR3_RTSE /*!< Request To Send */ +#define UART_HWCONTROL_CTS USART_CR3_CTSE /*!< Clear To Send */ +#define UART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< Request and Clear To Send */ +/** + * @} + */ + +/** @defgroup UART_Mode UART Transfer Mode + * @{ + */ +#define UART_MODE_RX USART_CR1_RE /*!< RX mode */ +#define UART_MODE_TX USART_CR1_TE /*!< TX mode */ +#define UART_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */ +/** + * @} + */ + +/** @defgroup UART_State UART State + * @{ + */ +#define UART_STATE_DISABLE 0x00000000U /*!< UART disabled */ +#define UART_STATE_ENABLE USART_CR1_UE /*!< UART enabled */ +/** + * @} + */ + +/** @defgroup UART_Over_Sampling UART Over Sampling + * @{ + */ +#define UART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#define UART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +/** + * @} + */ + +/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method + * @{ + */ +#define UART_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< One-bit sampling disable */ +#define UART_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< One-bit sampling enable */ +/** + * @} + */ + +/** @defgroup UART_ClockPrescaler UART Clock Prescaler + * @{ + */ +#define UART_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ +#define UART_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ +#define UART_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ +#define UART_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ +#define UART_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ +#define UART_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ +#define UART_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ +#define UART_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ +#define UART_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ +#define UART_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ +#define UART_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ +#define UART_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ +/** + * @} + */ + +/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode + * @{ + */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT 0x00000000U /*!< Auto Baud rate detection + on start bit */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE USART_CR2_ABRMODE_0 /*!< Auto Baud rate detection + on falling edge */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME USART_CR2_ABRMODE_1 /*!< Auto Baud rate detection + on 0x7F frame detection */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME USART_CR2_ABRMODE /*!< Auto Baud rate detection + on 0x55 frame detection */ +/** + * @} + */ + +/** @defgroup UART_Receiver_Timeout UART Receiver Timeout + * @{ + */ +#define UART_RECEIVER_TIMEOUT_DISABLE 0x00000000U /*!< UART Receiver Timeout disable */ +#define UART_RECEIVER_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< UART Receiver Timeout enable */ +/** + * @} + */ + +/** @defgroup UART_LIN UART Local Interconnection Network mode + * @{ + */ +#define UART_LIN_DISABLE 0x00000000U /*!< Local Interconnect Network disable */ +#define UART_LIN_ENABLE USART_CR2_LINEN /*!< Local Interconnect Network enable */ +/** + * @} + */ + +/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection + * @{ + */ +#define UART_LINBREAKDETECTLENGTH_10B 0x00000000U /*!< LIN 10-bit break detection length */ +#define UART_LINBREAKDETECTLENGTH_11B USART_CR2_LBDL /*!< LIN 11-bit break detection length */ +/** + * @} + */ + +/** @defgroup UART_DMA_Tx UART DMA Tx + * @{ + */ +#define UART_DMA_TX_DISABLE 0x00000000U /*!< UART DMA TX disabled */ +#define UART_DMA_TX_ENABLE USART_CR3_DMAT /*!< UART DMA TX enabled */ +/** + * @} + */ + +/** @defgroup UART_DMA_Rx UART DMA Rx + * @{ + */ +#define UART_DMA_RX_DISABLE 0x00000000U /*!< UART DMA RX disabled */ +#define UART_DMA_RX_ENABLE USART_CR3_DMAR /*!< UART DMA RX enabled */ +/** + * @} + */ + +/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection + * @{ + */ +#define UART_HALF_DUPLEX_DISABLE 0x00000000U /*!< UART half-duplex disabled */ +#define UART_HALF_DUPLEX_ENABLE USART_CR3_HDSEL /*!< UART half-duplex enabled */ +/** + * @} + */ + +/** @defgroup UART_WakeUp_Methods UART WakeUp Methods + * @{ + */ +#define UART_WAKEUPMETHOD_IDLELINE 0x00000000U /*!< UART wake-up on idle line */ +#define UART_WAKEUPMETHOD_ADDRESSMARK USART_CR1_WAKE /*!< UART wake-up on address mark */ +/** + * @} + */ + +/** @defgroup UART_Request_Parameters UART Request Parameters + * @{ + */ +#define UART_AUTOBAUD_REQUEST USART_RQR_ABRRQ /*!< Auto-Baud Rate Request */ +#define UART_SENDBREAK_REQUEST USART_RQR_SBKRQ /*!< Send Break Request */ +#define UART_MUTE_MODE_REQUEST USART_RQR_MMRQ /*!< Mute Mode Request */ +#define UART_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ +#define UART_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ +/** + * @} + */ + +/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type + * @{ + */ +#define UART_ADVFEATURE_NO_INIT 0x00000000U /*!< No advanced feature initialization */ +#define UART_ADVFEATURE_TXINVERT_INIT 0x00000001U /*!< TX pin active level inversion */ +#define UART_ADVFEATURE_RXINVERT_INIT 0x00000002U /*!< RX pin active level inversion */ +#define UART_ADVFEATURE_DATAINVERT_INIT 0x00000004U /*!< Binary data inversion */ +#define UART_ADVFEATURE_SWAP_INIT 0x00000008U /*!< TX/RX pins swap */ +#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT 0x00000010U /*!< RX overrun disable */ +#define UART_ADVFEATURE_DMADISABLEONERROR_INIT 0x00000020U /*!< DMA disable on Reception Error */ +#define UART_ADVFEATURE_AUTOBAUDRATE_INIT 0x00000040U /*!< Auto Baud rate detection initialization */ +#define UART_ADVFEATURE_MSBFIRST_INIT 0x00000080U /*!< Most significant bit sent/received first */ +/** + * @} + */ + +/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion + * @{ + */ +#define UART_ADVFEATURE_TXINV_DISABLE 0x00000000U /*!< TX pin active level inversion disable */ +#define UART_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV /*!< TX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion + * @{ + */ +#define UART_ADVFEATURE_RXINV_DISABLE 0x00000000U /*!< RX pin active level inversion disable */ +#define UART_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV /*!< RX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion + * @{ + */ +#define UART_ADVFEATURE_DATAINV_DISABLE 0x00000000U /*!< Binary data inversion disable */ +#define UART_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV /*!< Binary data inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap + * @{ + */ +#define UART_ADVFEATURE_SWAP_DISABLE 0x00000000U /*!< TX/RX pins swap disable */ +#define UART_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP /*!< TX/RX pins swap enable */ +/** + * @} + */ + +/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable + * @{ + */ +#define UART_ADVFEATURE_OVERRUN_ENABLE 0x00000000U /*!< RX overrun enable */ +#define UART_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS /*!< RX overrun disable */ +/** + * @} + */ + +/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable + * @{ + */ +#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE 0x00000000U /*!< RX Auto Baud rate detection enable */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE USART_CR2_ABREN /*!< RX Auto Baud rate detection disable */ +/** + * @} + */ + +/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error + * @{ + */ +#define UART_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U /*!< DMA enable on Reception Error */ +#define UART_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE /*!< DMA disable on Reception Error */ +/** + * @} + */ + +/** @defgroup UART_MSB_First UART Advanced Feature MSB First + * @{ + */ +#define UART_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received + first disable */ +#define UART_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received + first enable */ +/** + * @} + */ + +/** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable + * @{ + */ +#define UART_ADVFEATURE_STOPMODE_DISABLE 0x00000000U /*!< UART stop mode disable */ +#define UART_ADVFEATURE_STOPMODE_ENABLE USART_CR1_UESM /*!< UART stop mode enable */ +/** + * @} + */ + +/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable + * @{ + */ +#define UART_ADVFEATURE_MUTEMODE_DISABLE 0x00000000U /*!< UART mute mode disable */ +#define UART_ADVFEATURE_MUTEMODE_ENABLE USART_CR1_MME /*!< UART mute mode enable */ +/** + * @} + */ + +/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register + * @{ + */ +#define UART_CR2_ADDRESS_LSB_POS 24U /*!< UART address-matching LSB position in CR2 register */ +/** + * @} + */ + +/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection + * @{ + */ +#define UART_WAKEUP_ON_ADDRESS 0x00000000U /*!< UART wake-up on address */ +#define UART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< UART wake-up on start bit */ +#define UART_WAKEUP_ON_READDATA_NONEMPTY USART_CR3_WUS /*!< UART wake-up on receive data register + not empty or RXFIFO is not empty */ +/** + * @} + */ + +/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity + * @{ + */ +#define UART_DE_POLARITY_HIGH 0x00000000U /*!< Driver enable signal is active high */ +#define UART_DE_POLARITY_LOW USART_CR3_DEP /*!< Driver enable signal is active low */ +/** + * @} + */ + +/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register + * @{ + */ +#define UART_CR1_DEAT_ADDRESS_LSB_POS 21U /*!< UART Driver Enable assertion time LSB + position in CR1 register */ +/** + * @} + */ + +/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register + * @{ + */ +#define UART_CR1_DEDT_ADDRESS_LSB_POS 16U /*!< UART Driver Enable de-assertion time LSB + position in CR1 register */ +/** + * @} + */ + +/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask + * @{ + */ +#define UART_IT_MASK 0x001FU /*!< UART interruptions flags mask */ +/** + * @} + */ + +/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value + * @{ + */ +#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFFU /*!< UART polling-based communications time-out value */ +/** + * @} + */ + +/** @defgroup UART_Flags UART Status Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define UART_FLAG_TXFT USART_ISR_TXFT /*!< UART TXFIFO threshold flag */ +#define UART_FLAG_RXFT USART_ISR_RXFT /*!< UART RXFIFO threshold flag */ +#define UART_FLAG_RXFF USART_ISR_RXFF /*!< UART RXFIFO Full flag */ +#define UART_FLAG_TXFE USART_ISR_TXFE /*!< UART TXFIFO Empty flag */ +#define UART_FLAG_REACK USART_ISR_REACK /*!< UART receive enable acknowledge flag */ +#define UART_FLAG_TEACK USART_ISR_TEACK /*!< UART transmit enable acknowledge flag */ +#define UART_FLAG_WUF USART_ISR_WUF /*!< UART wake-up from stop mode flag */ +#define UART_FLAG_RWU USART_ISR_RWU /*!< UART receiver wake-up from mute mode flag */ +#define UART_FLAG_SBKF USART_ISR_SBKF /*!< UART send break flag */ +#define UART_FLAG_CMF USART_ISR_CMF /*!< UART character match flag */ +#define UART_FLAG_BUSY USART_ISR_BUSY /*!< UART busy flag */ +#define UART_FLAG_ABRF USART_ISR_ABRF /*!< UART auto Baud rate flag */ +#define UART_FLAG_ABRE USART_ISR_ABRE /*!< UART auto Baud rate error */ +#define UART_FLAG_RTOF USART_ISR_RTOF /*!< UART receiver timeout flag */ +#define UART_FLAG_CTS USART_ISR_CTS /*!< UART clear to send flag */ +#define UART_FLAG_CTSIF USART_ISR_CTSIF /*!< UART clear to send interrupt flag */ +#define UART_FLAG_LBDF USART_ISR_LBDF /*!< UART LIN break detection flag */ +#define UART_FLAG_TXE USART_ISR_TXE_TXFNF /*!< UART transmit data register empty */ +#define UART_FLAG_TXFNF USART_ISR_TXE_TXFNF /*!< UART TXFIFO not full */ +#define UART_FLAG_TC USART_ISR_TC /*!< UART transmission complete */ +#define UART_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< UART read data register not empty */ +#define UART_FLAG_RXFNE USART_ISR_RXNE_RXFNE /*!< UART RXFIFO not empty */ +#define UART_FLAG_IDLE USART_ISR_IDLE /*!< UART idle flag */ +#define UART_FLAG_ORE USART_ISR_ORE /*!< UART overrun error */ +#define UART_FLAG_NE USART_ISR_NE /*!< UART noise error */ +#define UART_FLAG_FE USART_ISR_FE /*!< UART frame error */ +#define UART_FLAG_PE USART_ISR_PE /*!< UART parity error */ +/** + * @} + */ + +/** @defgroup UART_Interrupt_definition UART Interrupts Definition + * Elements values convention: 000ZZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZZ : Flag position in the ISR register(5bits) + * Elements values convention: 000000000XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * Elements values convention: 0000ZZZZ00000000b + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ +#define UART_IT_PE 0x0028U /*!< UART parity error interruption */ +#define UART_IT_TXE 0x0727U /*!< UART transmit data register empty interruption */ +#define UART_IT_TXFNF 0x0727U /*!< UART TX FIFO not full interruption */ +#define UART_IT_TC 0x0626U /*!< UART transmission complete interruption */ +#define UART_IT_RXNE 0x0525U /*!< UART read data register not empty interruption */ +#define UART_IT_RXFNE 0x0525U /*!< UART RXFIFO not empty interruption */ +#define UART_IT_IDLE 0x0424U /*!< UART idle interruption */ +#define UART_IT_LBD 0x0846U /*!< UART LIN break detection interruption */ +#define UART_IT_CTS 0x096AU /*!< UART CTS interruption */ +#define UART_IT_CM 0x112EU /*!< UART character match interruption */ +#define UART_IT_WUF 0x1476U /*!< UART wake-up from stop mode interruption */ +#define UART_IT_RXFF 0x183FU /*!< UART RXFIFO full interruption */ +#define UART_IT_TXFE 0x173EU /*!< UART TXFIFO empty interruption */ +#define UART_IT_RXFT 0x1A7CU /*!< UART RXFIFO threshold reached interruption */ +#define UART_IT_TXFT 0x1B77U /*!< UART TXFIFO threshold reached interruption */ +#define UART_IT_RTO 0x0B3AU /*!< UART receiver timeout interruption */ + +#define UART_IT_ERR 0x0060U /*!< UART error interruption */ + +#define UART_IT_ORE 0x0300U /*!< UART overrun error interruption */ +#define UART_IT_NE 0x0200U /*!< UART noise error interruption */ +#define UART_IT_FE 0x0100U /*!< UART frame error interruption */ +/** + * @} + */ + +/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags + * @{ + */ +#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define UART_CLEAR_NEF USART_ICR_NECF /*!< Noise Error detected Clear Flag */ +#define UART_CLEAR_OREF USART_ICR_ORECF /*!< Overrun Error Clear Flag */ +#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#define UART_CLEAR_TXFECF USART_ICR_TXFECF /*!< TXFIFO empty clear flag */ +#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag */ +#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ +#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */ +#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */ +#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< UART receiver timeout clear flag */ +/** + * @} + */ + +/** @defgroup UART_Reception_Type_Values UART Reception type values + * @{ + */ +#define HAL_UART_RECEPTION_STANDARD (0x00000000U) /*!< Standard reception */ +#define HAL_UART_RECEPTION_TOIDLE (0x00000001U) /*!< Reception till completion or IDLE event */ +#define HAL_UART_RECEPTION_TORTO (0x00000002U) /*!< Reception till completion or RTO event */ +#define HAL_UART_RECEPTION_TOCHARMATCH (0x00000003U) /*!< Reception till completion or CM event */ +/** + * @} + */ + +/** @defgroup UART_RxEvent_Type_Values UART RxEvent type values + * @{ + */ +#define HAL_UART_RXEVENT_TC (0x00000000U) /*!< RxEvent linked to Transfer Complete event */ +#define HAL_UART_RXEVENT_HT (0x00000001U) /*!< RxEvent linked to Half Transfer event */ +#define HAL_UART_RXEVENT_IDLE (0x00000002U) /*!< RxEvent linked to IDLE event */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup UART_Exported_Macros UART Exported Macros + * @{ + */ + +/** @brief Reset UART handle states. + * @param __HANDLE__ UART handle. + * @retval None + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + } while(0U) +#endif /*USE_HAL_UART_REGISTER_CALLBACKS */ + +/** @brief Flush the UART Data registers. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \ + } while(0U) + +/** @brief Clear the specified UART pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref UART_CLEAR_TXFECF TXFIFO empty clear Flag + * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver Timeout clear flag + * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag + * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag + * @arg @ref UART_CLEAR_CMF Character Match Clear Flag + * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag + * @retval None + */ +#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the UART PE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_PEF) + +/** @brief Clear the UART FE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_FEF) + +/** @brief Clear the UART NE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_NEF) + +/** @brief Clear the UART ORE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_OREF) + +/** @brief Clear the UART IDLE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_IDLEF) + +/** @brief Clear the UART TX FIFO empty clear flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_TXFECF(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_TXFECF) + +/** @brief Check whether the specified UART flag is set or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref UART_FLAG_TXFT TXFIFO threshold flag + * @arg @ref UART_FLAG_RXFT RXFIFO threshold flag + * @arg @ref UART_FLAG_RXFF RXFIFO Full flag + * @arg @ref UART_FLAG_TXFE TXFIFO Empty flag + * @arg @ref UART_FLAG_REACK Receive enable acknowledge flag + * @arg @ref UART_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref UART_FLAG_WUF Wake up from stop mode flag + * @arg @ref UART_FLAG_RWU Receiver wake up flag (if the UART in mute mode) + * @arg @ref UART_FLAG_SBKF Send Break flag + * @arg @ref UART_FLAG_CMF Character match flag + * @arg @ref UART_FLAG_BUSY Busy flag + * @arg @ref UART_FLAG_ABRF Auto Baud rate detection flag + * @arg @ref UART_FLAG_ABRE Auto Baud rate detection error flag + * @arg @ref UART_FLAG_CTS CTS Change flag + * @arg @ref UART_FLAG_LBDF LIN Break detection flag + * @arg @ref UART_FLAG_TXE Transmit data register empty flag + * @arg @ref UART_FLAG_TXFNF UART TXFIFO not full flag + * @arg @ref UART_FLAG_TC Transmission Complete flag + * @arg @ref UART_FLAG_RXNE Receive data register not empty flag + * @arg @ref UART_FLAG_RXFNE UART RXFIFO not empty flag + * @arg @ref UART_FLAG_RTOF Receiver Timeout flag + * @arg @ref UART_FLAG_IDLE Idle Line detection flag + * @arg @ref UART_FLAG_ORE Overrun Error flag + * @arg @ref UART_FLAG_NE Noise Error flag + * @arg @ref UART_FLAG_FE Framing Error flag + * @arg @ref UART_FLAG_PE Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + +/** @brief Enable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) + +/** @brief Disable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) + +/** @brief Check whether the specified UART interrupt has occurred or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt to check. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_UART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\ + & (1U << ((__INTERRUPT__)>> 8U))) != RESET) ? SET : RESET) + +/** @brief Check whether the specified UART interrupt source is enabled or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U) ?\ + (__HANDLE__)->Instance->CR1 : \ + (((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U) ?\ + (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) & (1U <<\ + (((uint16_t)(__INTERRUPT__)) &\ + UART_IT_MASK))) != RESET) ? SET : RESET) + +/** @brief Clear the specified UART ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt + * This parameter can be one of the following values: + * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver timeout clear flag + * @arg @ref UART_CLEAR_TXFECF TXFIFO empty Clear Flag + * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag + * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag + * @arg @ref UART_CLEAR_CMF Character Match Clear Flag + * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag + * @retval None + */ +#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) + +/** @brief Set a specific UART request flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __REQ__ specifies the request flag to set + * This parameter can be one of the following values: + * @arg @ref UART_AUTOBAUD_REQUEST Auto-Baud Rate Request + * @arg @ref UART_SENDBREAK_REQUEST Send Break Request + * @arg @ref UART_MUTE_MODE_REQUEST Mute Mode Request + * @arg @ref UART_RXDATA_FLUSH_REQUEST Receive Data flush Request + * @arg @ref UART_TXDATA_FLUSH_REQUEST Transmit data flush Request + * @retval None + */ +#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the UART one bit sample method. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the UART one bit sample method. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= ~USART_CR3_ONEBIT) + +/** @brief Enable UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** @brief Enable CTS flow control. + * @note This macro allows to enable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ + do{ \ + ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ + } while(0U) + +/** @brief Disable CTS flow control. + * @note This macro allows to disable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ + do{ \ + ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ + } while(0U) + +/** @brief Enable RTS flow control. + * @note This macro allows to enable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ + do{ \ + ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ + } while(0U) + +/** @brief Disable RTS flow control. + * @note This macro allows to disable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ + do{ \ + ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ + } while(0U) +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup UART_Private_Macros UART Private Macros + * @{ + */ +/** @brief Get UART clok division factor from clock prescaler value. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval UART clock division factor + */ +#define UART_GET_DIV_FACTOR(__CLOCKPRESCALER__) \ + (((__CLOCKPRESCALER__) == UART_PRESCALER_DIV1) ? 1U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV2) ? 2U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV4) ? 4U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV6) ? 6U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV8) ? 8U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV10) ? 10U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV12) ? 12U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV16) ? 16U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV32) ? 32U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV64) ? 64U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV128) ? 128U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV256) ? 256U : 1U) + +/** @brief BRR division operation to set BRR register with LPUART. + * @param __PCLK__ LPUART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_LPUART(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + ((uint32_t)((((((uint64_t)(__PCLK__))/(UARTPrescTable[(__CLOCKPRESCALER__)]))*256U)+ \ + (uint32_t)((__BAUD__)/2U)) / (__BAUD__)) \ + ) + +/** @brief BRR division operation to set BRR register in 8-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + (((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)])*2U) + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief BRR division operation to set BRR register in 16-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + ((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)]) + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief Check whether or not UART instance is Low Power UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval SET (instance is LPUART) or RESET (instance isn't LPUART) + */ +#define UART_INSTANCE_LOWPOWER(__HANDLE__) (IS_LPUART_INSTANCE((__HANDLE__)->Instance)) + +/** @brief Check UART Baud rate. + * @param __BAUDRATE__ Baudrate specified by the user. + * The maximum Baud Rate is derived from the maximum clock on G0 (i.e. 64 MHz) + * divided by the smallest oversampling used on the USART (i.e. 8) + * @retval SET (__BAUDRATE__ is valid) or RESET (__BAUDRATE__ is invalid) + */ +#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 8000001U) + +/** @brief Check UART assertion time. + * @param __TIME__ 5-bit value assertion time. + * @retval Test result (TRUE or FALSE). + */ +#define IS_UART_ASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) + +/** @brief Check UART deassertion time. + * @param __TIME__ 5-bit value deassertion time. + * @retval Test result (TRUE or FALSE). + */ +#define IS_UART_DEASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) + +/** + * @brief Ensure that UART frame number of stop bits is valid. + * @param __STOPBITS__ UART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_UART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_0_5) || \ + ((__STOPBITS__) == UART_STOPBITS_1) || \ + ((__STOPBITS__) == UART_STOPBITS_1_5) || \ + ((__STOPBITS__) == UART_STOPBITS_2)) + +/** + * @brief Ensure that LPUART frame number of stop bits is valid. + * @param __STOPBITS__ LPUART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_LPUART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_1) || \ + ((__STOPBITS__) == UART_STOPBITS_2)) + +/** + * @brief Ensure that UART frame parity is valid. + * @param __PARITY__ UART frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_UART_PARITY(__PARITY__) (((__PARITY__) == UART_PARITY_NONE) || \ + ((__PARITY__) == UART_PARITY_EVEN) || \ + ((__PARITY__) == UART_PARITY_ODD)) + +/** + * @brief Ensure that UART hardware flow control is valid. + * @param __CONTROL__ UART hardware flow control. + * @retval SET (__CONTROL__ is valid) or RESET (__CONTROL__ is invalid) + */ +#define IS_UART_HARDWARE_FLOW_CONTROL(__CONTROL__)\ + (((__CONTROL__) == UART_HWCONTROL_NONE) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS) || \ + ((__CONTROL__) == UART_HWCONTROL_CTS) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS_CTS)) + +/** + * @brief Ensure that UART communication mode is valid. + * @param __MODE__ UART communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_UART_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(UART_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U)) + +/** + * @brief Ensure that UART state is valid. + * @param __STATE__ UART state. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_UART_STATE(__STATE__) (((__STATE__) == UART_STATE_DISABLE) || \ + ((__STATE__) == UART_STATE_ENABLE)) + +/** + * @brief Ensure that UART oversampling is valid. + * @param __SAMPLING__ UART oversampling. + * @retval SET (__SAMPLING__ is valid) or RESET (__SAMPLING__ is invalid) + */ +#define IS_UART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == UART_OVERSAMPLING_16) || \ + ((__SAMPLING__) == UART_OVERSAMPLING_8)) + +/** + * @brief Ensure that UART frame sampling is valid. + * @param __ONEBIT__ UART frame sampling. + * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) + */ +#define IS_UART_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == UART_ONE_BIT_SAMPLE_DISABLE) || \ + ((__ONEBIT__) == UART_ONE_BIT_SAMPLE_ENABLE)) + +/** + * @brief Ensure that UART auto Baud rate detection mode is valid. + * @param __MODE__ UART auto Baud rate detection mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME)) + +/** + * @brief Ensure that UART receiver timeout setting is valid. + * @param __TIMEOUT__ UART receiver timeout setting. + * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid) + */ +#define IS_UART_RECEIVER_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_DISABLE) || \ + ((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_ENABLE)) + +/** @brief Check the receiver timeout value. + * @note The maximum UART receiver timeout value is 0xFFFFFF. + * @param __TIMEOUTVALUE__ receiver timeout value. + * @retval Test result (TRUE or FALSE) + */ +#define IS_UART_RECEIVER_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU) + +/** + * @brief Ensure that UART LIN state is valid. + * @param __LIN__ UART LIN state. + * @retval SET (__LIN__ is valid) or RESET (__LIN__ is invalid) + */ +#define IS_UART_LIN(__LIN__) (((__LIN__) == UART_LIN_DISABLE) || \ + ((__LIN__) == UART_LIN_ENABLE)) + +/** + * @brief Ensure that UART LIN break detection length is valid. + * @param __LENGTH__ UART LIN break detection length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) (((__LENGTH__) == UART_LINBREAKDETECTLENGTH_10B) || \ + ((__LENGTH__) == UART_LINBREAKDETECTLENGTH_11B)) + +/** + * @brief Ensure that UART DMA TX state is valid. + * @param __DMATX__ UART DMA TX state. + * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid) + */ +#define IS_UART_DMA_TX(__DMATX__) (((__DMATX__) == UART_DMA_TX_DISABLE) || \ + ((__DMATX__) == UART_DMA_TX_ENABLE)) + +/** + * @brief Ensure that UART DMA RX state is valid. + * @param __DMARX__ UART DMA RX state. + * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid) + */ +#define IS_UART_DMA_RX(__DMARX__) (((__DMARX__) == UART_DMA_RX_DISABLE) || \ + ((__DMARX__) == UART_DMA_RX_ENABLE)) + +/** + * @brief Ensure that UART half-duplex state is valid. + * @param __HDSEL__ UART half-duplex state. + * @retval SET (__HDSEL__ is valid) or RESET (__HDSEL__ is invalid) + */ +#define IS_UART_HALF_DUPLEX(__HDSEL__) (((__HDSEL__) == UART_HALF_DUPLEX_DISABLE) || \ + ((__HDSEL__) == UART_HALF_DUPLEX_ENABLE)) + +/** + * @brief Ensure that UART wake-up method is valid. + * @param __WAKEUP__ UART wake-up method . + * @retval SET (__WAKEUP__ is valid) or RESET (__WAKEUP__ is invalid) + */ +#define IS_UART_WAKEUPMETHOD(__WAKEUP__) (((__WAKEUP__) == UART_WAKEUPMETHOD_IDLELINE) || \ + ((__WAKEUP__) == UART_WAKEUPMETHOD_ADDRESSMARK)) + +/** + * @brief Ensure that UART request parameter is valid. + * @param __PARAM__ UART request parameter. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \ + ((__PARAM__) == UART_SENDBREAK_REQUEST) || \ + ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \ + ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == UART_TXDATA_FLUSH_REQUEST)) + +/** + * @brief Ensure that UART advanced features initialization is valid. + * @param __INIT__ UART advanced features initialization. + * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid) + */ +#define IS_UART_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (UART_ADVFEATURE_NO_INIT | \ + UART_ADVFEATURE_TXINVERT_INIT | \ + UART_ADVFEATURE_RXINVERT_INIT | \ + UART_ADVFEATURE_DATAINVERT_INIT | \ + UART_ADVFEATURE_SWAP_INIT | \ + UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ + UART_ADVFEATURE_DMADISABLEONERROR_INIT | \ + UART_ADVFEATURE_AUTOBAUDRATE_INIT | \ + UART_ADVFEATURE_MSBFIRST_INIT)) + +/** + * @brief Ensure that UART frame TX inversion setting is valid. + * @param __TXINV__ UART frame TX inversion setting. + * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == UART_ADVFEATURE_TXINV_DISABLE) || \ + ((__TXINV__) == UART_ADVFEATURE_TXINV_ENABLE)) + +/** + * @brief Ensure that UART frame RX inversion setting is valid. + * @param __RXINV__ UART frame RX inversion setting. + * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == UART_ADVFEATURE_RXINV_DISABLE) || \ + ((__RXINV__) == UART_ADVFEATURE_RXINV_ENABLE)) + +/** + * @brief Ensure that UART frame data inversion setting is valid. + * @param __DATAINV__ UART frame data inversion setting. + * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == UART_ADVFEATURE_DATAINV_DISABLE) || \ + ((__DATAINV__) == UART_ADVFEATURE_DATAINV_ENABLE)) + +/** + * @brief Ensure that UART frame RX/TX pins swap setting is valid. + * @param __SWAP__ UART frame RX/TX pins swap setting. + * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid) + */ +#define IS_UART_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == UART_ADVFEATURE_SWAP_DISABLE) || \ + ((__SWAP__) == UART_ADVFEATURE_SWAP_ENABLE)) + +/** + * @brief Ensure that UART frame overrun setting is valid. + * @param __OVERRUN__ UART frame overrun setting. + * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid) + */ +#define IS_UART_OVERRUN(__OVERRUN__) (((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_ENABLE) || \ + ((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_DISABLE)) + +/** + * @brief Ensure that UART auto Baud rate state is valid. + * @param __AUTOBAUDRATE__ UART auto Baud rate state. + * @retval SET (__AUTOBAUDRATE__ is valid) or RESET (__AUTOBAUDRATE__ is invalid) + */ +#define IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__) (((__AUTOBAUDRATE__) == \ + UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \ + ((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE)) + +/** + * @brief Ensure that UART DMA enabling or disabling on error setting is valid. + * @param __DMA__ UART DMA enabling or disabling on error setting. + * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid) + */ +#define IS_UART_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \ + ((__DMA__) == UART_ADVFEATURE_DMA_DISABLEONRXERROR)) + +/** + * @brief Ensure that UART frame MSB first setting is valid. + * @param __MSBFIRST__ UART frame MSB first setting. + * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid) + */ +#define IS_UART_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \ + ((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_ENABLE)) + +/** + * @brief Ensure that UART stop mode state is valid. + * @param __STOPMODE__ UART stop mode state. + * @retval SET (__STOPMODE__ is valid) or RESET (__STOPMODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) (((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_DISABLE) || \ + ((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_ENABLE)) + +/** + * @brief Ensure that UART mute mode state is valid. + * @param __MUTE__ UART mute mode state. + * @retval SET (__MUTE__ is valid) or RESET (__MUTE__ is invalid) + */ +#define IS_UART_MUTE_MODE(__MUTE__) (((__MUTE__) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \ + ((__MUTE__) == UART_ADVFEATURE_MUTEMODE_ENABLE)) + +/** + * @brief Ensure that UART wake-up selection is valid. + * @param __WAKE__ UART wake-up selection. + * @retval SET (__WAKE__ is valid) or RESET (__WAKE__ is invalid) + */ +#define IS_UART_WAKEUP_SELECTION(__WAKE__) (((__WAKE__) == UART_WAKEUP_ON_ADDRESS) || \ + ((__WAKE__) == UART_WAKEUP_ON_STARTBIT) || \ + ((__WAKE__) == UART_WAKEUP_ON_READDATA_NONEMPTY)) + +/** + * @brief Ensure that UART driver enable polarity is valid. + * @param __POLARITY__ UART driver enable polarity. + * @retval SET (__POLARITY__ is valid) or RESET (__POLARITY__ is invalid) + */ +#define IS_UART_DE_POLARITY(__POLARITY__) (((__POLARITY__) == UART_DE_POLARITY_HIGH) || \ + ((__POLARITY__) == UART_DE_POLARITY_LOW)) + +/** + * @brief Ensure that UART Prescaler is valid. + * @param __CLOCKPRESCALER__ UART Prescaler value. + * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) + */ +#define IS_UART_PRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == UART_PRESCALER_DIV1) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV2) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV4) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV6) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV8) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV10) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV12) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV16) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV32) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV64) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV128) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV256)) + +/** + * @} + */ + +/* Include UART HAL Extended module */ +#include "stm32g0xx_hal_uart_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart); +void HAL_UART_MspInit(UART_HandleTypeDef *huart); +void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart); + +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); +void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart); + +void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue); +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart); + +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart); +void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State and Errors functions **************************************************/ +HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart); +uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions -----------------------------------------------------------*/ +/** @addtogroup UART_Private_Functions UART Private Functions + * @{ + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); + +/** + * @} + */ + +/* Private variables -----------------------------------------------------------*/ +/** @defgroup UART_Private_variables UART Private variables + * @{ + */ +/* Prescaler Table used in BRR computation macros. + Declared as extern here to allow use of private UART macros, outside of HAL UART functions */ +extern const uint16_t UARTPrescTable[12]; +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_UART_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h new file mode 100644 index 0000000..1ad91e9 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h @@ -0,0 +1,771 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_uart_ex.h + * @author MCD Application Team + * @brief Header file of UART HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_UART_EX_H +#define STM32G0xx_HAL_UART_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup UARTEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Types UARTEx Exported Types + * @{ + */ + +/** + * @brief UART wake up from stop mode parameters + */ +typedef struct +{ + uint32_t WakeUpEvent; /*!< Specifies which event will activate the Wakeup from Stop mode flag (WUF). + This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection. + If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must + be filled up. */ + + uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long. + This parameter can be a value of @ref UARTEx_WakeUp_Address_Length. */ + + uint8_t Address; /*!< UART/USART node address (7-bit long max). */ +} UART_WakeUpTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants + * @{ + */ + +/** @defgroup UARTEx_Word_Length UARTEx Word Length + * @{ + */ +#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */ +#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */ +#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */ +/** + * @} + */ + +/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length + * @{ + */ +#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */ +#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */ +/** + * @} + */ + +/** @defgroup UARTEx_FIFO_mode UARTEx FIFO mode + * @brief UART FIFO mode + * @{ + */ +#define UART_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ +#define UART_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup UARTEx_TXFIFO_threshold_level UARTEx TXFIFO threshold level + * @brief UART TXFIFO threshold level + * @{ + */ +#define UART_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TX FIFO reaches 1/8 of its depth */ +#define UART_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TX FIFO reaches 1/4 of its depth */ +#define UART_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TX FIFO reaches 1/2 of its depth */ +#define UART_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TX FIFO reaches 3/4 of its depth */ +#define UART_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TX FIFO reaches 7/8 of its depth */ +#define UART_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TX FIFO becomes empty */ +/** + * @} + */ + +/** @defgroup UARTEx_RXFIFO_threshold_level UARTEx RXFIFO threshold level + * @brief UART RXFIFO threshold level + * @{ + */ +#define UART_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RX FIFO reaches 1/8 of its depth */ +#define UART_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RX FIFO reaches 1/4 of its depth */ +#define UART_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RX FIFO reaches 1/2 of its depth */ +#define UART_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RX FIFO reaches 3/4 of its depth */ +#define UART_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RX FIFO reaches 7/8 of its depth */ +#define UART_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RX FIFO becomes full */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UARTEx_Exported_Functions + * @{ + */ + +/** @addtogroup UARTEx_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime); + +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group2 + * @{ + */ + +void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart); + +void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart); +void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group3 + * @{ + */ + +/* Peripheral Control functions **********************************************/ +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart); + +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength); + +HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); +HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); + +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, + uint32_t Timeout); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); + +HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(const UART_HandleTypeDef *huart); + + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UARTEx_Private_Macros UARTEx Private Macros + * @{ + */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + switch(__HAL_RCC_GET_USART3_SOURCE()) \ + { \ + case RCC_USART3CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART3CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART3CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART3CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART5) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART6) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == LPUART2) \ + { \ + switch(__HAL_RCC_GET_LPUART2_SOURCE()) \ + { \ + case RCC_LPUART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined(STM32G0B0xx) +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + switch(__HAL_RCC_GET_USART3_SOURCE()) \ + { \ + case RCC_USART3CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART3CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART3CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART3CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART5) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART6) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined(STM32G081xx) || defined(STM32G071xx) +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined(STM32G070xx) +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined(STM32G041xx) || defined(STM32G031xx) || defined(STM32G051xx) || defined(STM32G061xx) +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined(STM32G030xx) || defined(STM32G050xx) +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#endif /* STM32G0C1xx || STM32G0B1xx */ + +/** @brief Report the UART mask to apply to retrieve the received data + * according to the word length and to the parity bits activation. + * @note If PCE = 1, the parity bit is not included in the data extracted + * by the reception API(). + * This masking operation is not carried out in the case of + * DMA transfers. + * @param __HANDLE__ specifies the UART Handle. + * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field. + */ +#define UART_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x003FU ; \ + } \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x0000U; \ + } \ + } while(0U) + +/** + * @brief Ensure that UART frame length is valid. + * @param __LENGTH__ UART frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \ + ((__LENGTH__) == UART_WORDLENGTH_8B) || \ + ((__LENGTH__) == UART_WORDLENGTH_9B)) + +/** + * @brief Ensure that UART wake-up address length is valid. + * @param __ADDRESS__ UART wake-up address length. + * @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid) + */ +#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \ + ((__ADDRESS__) == UART_ADDRESS_DETECT_7B)) + +/** + * @brief Ensure that UART TXFIFO threshold level is valid. + * @param __THRESHOLD__ UART TXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_UART_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_8_8)) + +/** + * @brief Ensure that UART RXFIFO threshold level is valid. + * @param __THRESHOLD__ UART RXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_UART_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_8_8)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_UART_EX_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_adc.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_adc.h new file mode 100644 index 0000000..7db42c8 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_adc.h @@ -0,0 +1,5496 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_adc.h + * @author MCD Application Team + * @brief Header file of ADC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_ADC_H +#define STM32G0xx_LL_ADC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (ADC1) + +/** @defgroup ADC_LL ADC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup ADC_LL_Private_Constants ADC Private Constants + * @{ + */ + +/* Internal mask for ADC group regular sequencer: */ +/* To select into literal LL_ADC_REG_RANK_x the relevant bits for: */ +/* - sequencer rank bits position into the selected register */ + +#define ADC_REG_RANK_ID_SQRX_MASK (ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0) + +/* Definition of ADC group regular sequencer bits information to be inserted */ +/* into ADC group regular sequencer ranks literals definition. */ +#define ADC_REG_RANK_1_SQRX_BITOFFSET_POS ( 0UL) /* Equivalent to bitfield "ADC_CHSELR_SQ1" position in register */ +#define ADC_REG_RANK_2_SQRX_BITOFFSET_POS ( 4UL) /* Equivalent to bitfield "ADC_CHSELR_SQ2" position in register */ +#define ADC_REG_RANK_3_SQRX_BITOFFSET_POS ( 8UL) /* Equivalent to bitfield "ADC_CHSELR_SQ3" position in register */ +#define ADC_REG_RANK_4_SQRX_BITOFFSET_POS (12UL) /* Equivalent to bitfield "ADC_CHSELR_SQ4" position in register */ +#define ADC_REG_RANK_5_SQRX_BITOFFSET_POS (16UL) /* Equivalent to bitfield "ADC_CHSELR_SQ5" position in register */ +#define ADC_REG_RANK_6_SQRX_BITOFFSET_POS (20UL) /* Equivalent to bitfield "ADC_CHSELR_SQ6" position in register */ +#define ADC_REG_RANK_7_SQRX_BITOFFSET_POS (24UL) /* Equivalent to bitfield "ADC_CHSELR_SQ7" position in register */ +#define ADC_REG_RANK_8_SQRX_BITOFFSET_POS (28UL) /* Equivalent to bitfield "ADC_CHSELR_SQ8" position in register */ + + + +/* Internal mask for ADC group regular trigger: */ +/* To select into literal LL_ADC_REG_TRIG_x the relevant bits for: */ +/* - regular trigger source */ +/* - regular trigger edge */ +#define ADC_REG_TRIG_EXT_EDGE_DEFAULT (ADC_CFGR1_EXTEN_0) /* Trigger edge set to rising edge (default setting for + compatibility with some ADC on other STM32 series + having this setting set by HW default value) */ + +/* Mask containing trigger source masks for each of possible */ +/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ +/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */ +#define ADC_REG_TRIG_SOURCE_MASK (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR1_EXTSEL) << (4U * 0UL)) | \ + ((ADC_CFGR1_EXTSEL) << (4U * 1UL)) | \ + ((ADC_CFGR1_EXTSEL) << (4U * 2UL)) | \ + ((ADC_CFGR1_EXTSEL) << (4U * 3UL)) ) + +/* Mask containing trigger edge masks for each of possible */ +/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ +/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */ +#define ADC_REG_TRIG_EDGE_MASK (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR1_EXTEN) << (4U * 0UL)) | \ + ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) << (4U * 1UL)) | \ + ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) << (4U * 2UL)) | \ + ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) << (4U * 3UL)) ) + +/* Definition of ADC group regular trigger bits information. */ +#define ADC_REG_TRIG_EXTSEL_BITOFFSET_POS ( 6UL) /* Equivalent to bitfield "ADC_CFGR1_EXTSEL" position in register */ +#define ADC_REG_TRIG_EXTEN_BITOFFSET_POS (10UL) /* Equivalent to bitfield "ADC_CFGR1_EXTEN" position in register */ + + + +/* Internal mask for ADC channel: */ +/* To select into literal LL_ADC_CHANNEL_x the relevant bits for: */ +/* - channel identifier defined by number */ +/* - channel identifier defined by bitfield */ +/* - channel differentiation between external channels (connected to */ +/* GPIO pins) and internal channels (connected to internal paths) */ +#define ADC_CHANNEL_ID_NUMBER_MASK (ADC_CFGR1_AWD1CH) +#define ADC_CHANNEL_ID_BITFIELD_MASK (ADC_CHSELR_CHSEL) +#define ADC_CHANNEL_ID_NUMBER_MASK_SEQ (ADC_CHSELR_SQ1 << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) /* Equivalent to + ADC_CHANNEL_ID_NUMBER_MASK with reduced range: on this STM32 series, ADC group regular sequencer, + if set to mode "fully configurable", can contain channels with a restricted channel number. + Refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). */ +#define ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS (26UL) /* Equivalent to bitfield "ADC_CHANNEL_ID_NUMBER_MASK" + position in register */ +#define ADC_CHANNEL_ID_MASK (ADC_CHANNEL_ID_NUMBER_MASK | ADC_CHANNEL_ID_BITFIELD_MASK | \ + ADC_CHANNEL_ID_INTERNAL_CH_MASK) +/* Equivalent mask of ADC_CHANNEL_NUMBER_MASK aligned on register LSB (bit 0) */ +#define ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0 (0x0000001FUL) /* Equivalent to shift: (ADC_CHANNEL_NUMBER_MASK + >> [Position of bitfield "ADC_CHANNEL_NUMBER_MASK" in register]) */ + +/* Channel differentiation between external and internal channels */ +#define ADC_CHANNEL_ID_INTERNAL_CH (0x80000000UL) /* Marker of internal channel */ +#define ADC_CHANNEL_ID_INTERNAL_CH_MASK (ADC_CHANNEL_ID_INTERNAL_CH) + +/* Definition of channels ID number information to be inserted into */ +/* channels literals definition. */ +#define ADC_CHANNEL_0_NUMBER (0x00000000UL) +#define ADC_CHANNEL_1_NUMBER (ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_2_NUMBER (ADC_CFGR1_AWD1CH_1) +#define ADC_CHANNEL_3_NUMBER (ADC_CFGR1_AWD1CH_1 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_4_NUMBER (ADC_CFGR1_AWD1CH_2) +#define ADC_CHANNEL_5_NUMBER (ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_6_NUMBER (ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_1) +#define ADC_CHANNEL_7_NUMBER (ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_1 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_8_NUMBER (ADC_CFGR1_AWD1CH_3) +#define ADC_CHANNEL_9_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_10_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_1) +#define ADC_CHANNEL_11_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_1 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_12_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_2) +#define ADC_CHANNEL_13_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_14_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_1) +#define ADC_CHANNEL_15_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_2 | \ + ADC_CFGR1_AWD1CH_1 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_16_NUMBER (ADC_CFGR1_AWD1CH_4) +#define ADC_CHANNEL_17_NUMBER (ADC_CFGR1_AWD1CH_4 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_18_NUMBER (ADC_CFGR1_AWD1CH_4 | ADC_CFGR1_AWD1CH_1) + +/* Definition of channels ID bitfield information to be inserted into */ +/* channels literals definition. */ +#define ADC_CHANNEL_0_BITFIELD (ADC_CHSELR_CHSEL0) +#define ADC_CHANNEL_1_BITFIELD (ADC_CHSELR_CHSEL1) +#define ADC_CHANNEL_2_BITFIELD (ADC_CHSELR_CHSEL2) +#define ADC_CHANNEL_3_BITFIELD (ADC_CHSELR_CHSEL3) +#define ADC_CHANNEL_4_BITFIELD (ADC_CHSELR_CHSEL4) +#define ADC_CHANNEL_5_BITFIELD (ADC_CHSELR_CHSEL5) +#define ADC_CHANNEL_6_BITFIELD (ADC_CHSELR_CHSEL6) +#define ADC_CHANNEL_7_BITFIELD (ADC_CHSELR_CHSEL7) +#define ADC_CHANNEL_8_BITFIELD (ADC_CHSELR_CHSEL8) +#define ADC_CHANNEL_9_BITFIELD (ADC_CHSELR_CHSEL9) +#define ADC_CHANNEL_10_BITFIELD (ADC_CHSELR_CHSEL10) +#define ADC_CHANNEL_11_BITFIELD (ADC_CHSELR_CHSEL11) +#define ADC_CHANNEL_12_BITFIELD (ADC_CHSELR_CHSEL12) +#define ADC_CHANNEL_13_BITFIELD (ADC_CHSELR_CHSEL13) +#define ADC_CHANNEL_14_BITFIELD (ADC_CHSELR_CHSEL14) +#define ADC_CHANNEL_15_BITFIELD (ADC_CHSELR_CHSEL15) +#define ADC_CHANNEL_16_BITFIELD (ADC_CHSELR_CHSEL16) +#define ADC_CHANNEL_17_BITFIELD (ADC_CHSELR_CHSEL17) +#define ADC_CHANNEL_18_BITFIELD (ADC_CHSELR_CHSEL18) + +/* Internal mask for ADC channel sampling time: */ +/* To select into literals LL_ADC_SAMPLINGTIME_x */ +/* the relevant bits for: */ +/* (concatenation of multiple bits used in register SMPR) */ +/* - ADC channels sampling time: setting channel wise, to map each channel */ +/* on one of the common sampling time available. */ +/* - ADC channels common sampling time: set a sampling time into one of the */ +/* common sampling time available. */ +#define ADC_SAMPLING_TIME_CH_MASK (ADC_CHANNEL_ID_BITFIELD_MASK << ADC_SMPR_SMPSEL0_BITOFFSET_POS) +#define ADC_SAMPLING_TIME_SMP_MASK (ADC_SMPR_SMP2 | ADC_SMPR_SMP1) +#define ADC_SAMPLING_TIME_SMP_SHIFT_MASK (ADC_SMPR_SMP2_BITOFFSET_POS | ADC_SMPR_SMP1_BITOFFSET_POS) + +/* Internal mask for ADC analog watchdog: */ +/* To select into literals LL_ADC_AWD_CHANNELx_xxx the relevant bits for: */ +/* (concatenation of multiple bits used in different analog watchdogs, */ +/* (feature of several watchdogs not available on all STM32 series)). */ +/* - analog watchdog 1: monitored channel defined by number, */ +/* selection of ADC group (ADC group regular). */ +/* - analog watchdog 2 and 3: monitored channel defined by bitfield, no */ +/* selection on groups. */ + +/* Internal register offset for ADC analog watchdog channel configuration */ +#define ADC_AWD_CR1_REGOFFSET (0x00000000UL) +#define ADC_AWD_CR2_REGOFFSET (0x00100000UL) +#define ADC_AWD_CR3_REGOFFSET (0x00200000UL) + +/* Register offset gap between AWD1 and AWD2-AWD3 configuration registers */ +/* (Set separately as ADC_AWD_CRX_REGOFFSET to spare 32 bits space */ +#define ADC_AWD_CR12_REGOFFSETGAP_MASK (ADC_AWD2CR_AWD2CH_0) +#define ADC_AWD_CR12_REGOFFSETGAP_VAL (0x00000024UL) + +#define ADC_AWD_CRX_REGOFFSET_MASK (ADC_AWD_CR1_REGOFFSET | ADC_AWD_CR2_REGOFFSET | ADC_AWD_CR3_REGOFFSET) +#define ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS (20UL) + +#define ADC_AWD_CR1_CHANNEL_MASK (ADC_CFGR1_AWD1CH | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) +#define ADC_AWD_CR23_CHANNEL_MASK (ADC_AWD2CR_AWD2CH) +#define ADC_AWD_CR_ALL_CHANNEL_MASK (ADC_AWD_CR1_CHANNEL_MASK | ADC_AWD_CR23_CHANNEL_MASK) + +#define ADC_AWD_CRX_REGOFFSET_POS (20UL) /* Position of bits ADC_AWD_CRx_REGOFFSET + in ADC_AWD_CRX_REGOFFSET_MASK */ + +/* Internal register offset for ADC analog watchdog threshold configuration */ +#define ADC_AWD_TR1_REGOFFSET (ADC_AWD_CR1_REGOFFSET) +#define ADC_AWD_TR2_REGOFFSET (ADC_AWD_CR2_REGOFFSET) +#define ADC_AWD_TR3_REGOFFSET (ADC_AWD_CR3_REGOFFSET + (1UL << ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS)) +#define ADC_AWD_TRX_REGOFFSET_MASK (ADC_AWD_TR1_REGOFFSET | ADC_AWD_TR2_REGOFFSET | ADC_AWD_TR3_REGOFFSET) +#define ADC_AWD_TRX_REGOFFSET_POS (ADC_AWD_CRX_REGOFFSET_POS) /* Position of bits ADC_SQRx_REGOFFSET + in ADC_AWD_TRX_REGOFFSET_MASK */ +#define ADC_AWD_TRX_BIT_HIGH_MASK (0x00010000UL) /* Selection of 1 bit to discriminate + threshold high: mask of bit */ +#define ADC_AWD_TRX_BIT_HIGH_POS (16UL) /* Selection of 1 bit to discriminate + threshold high: position of bit */ +#define ADC_AWD_TRX_BIT_HIGH_SHIFT4 (ADC_AWD_TRX_BIT_HIGH_POS - 4UL) /* Shift of bit ADC_AWD_TRX_BIT_HIGH to + position to perform a shift of 4 ranks */ +#define ADC_AWD_TRX_REGOFFSET_BITOFFSET_POS (20UL) + + + +/* ADC registers bits positions */ +#define ADC_CFGR1_RES_BITOFFSET_POS ( 3UL) /* Equivalent to bitfield "ADC_CFGR1_RES" position in register */ +#define ADC_CFGR1_AWDSGL_BITOFFSET_POS (22UL) /* Equivalent to bitfield "ADC_CFGR1_AWDSGL" position in register */ +#define ADC_TR1_HT1_BITOFFSET_POS (16UL) /* Equivalent to bitfield "ADC_TR1_HT1" position in register */ +#define ADC_CHSELR_CHSEL0_BITOFFSET_POS ( 0UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL0" position in register */ +#define ADC_CHSELR_CHSEL1_BITOFFSET_POS ( 1UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL1" position in register */ +#define ADC_CHSELR_CHSEL2_BITOFFSET_POS ( 2UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL2" position in register */ +#define ADC_CHSELR_CHSEL3_BITOFFSET_POS ( 3UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL3" position in register */ +#define ADC_CHSELR_CHSEL4_BITOFFSET_POS ( 4UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL4" position in register */ +#define ADC_CHSELR_CHSEL5_BITOFFSET_POS ( 5UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL5" position in register */ +#define ADC_CHSELR_CHSEL6_BITOFFSET_POS ( 6UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL6" position in register */ +#define ADC_CHSELR_CHSEL7_BITOFFSET_POS ( 7UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL7" position in register */ +#define ADC_CHSELR_CHSEL8_BITOFFSET_POS ( 8UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL8" position in register */ +#define ADC_CHSELR_CHSEL9_BITOFFSET_POS ( 9UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL9" position in register */ +#define ADC_CHSELR_CHSEL10_BITOFFSET_POS (10UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL10" position in register */ +#define ADC_CHSELR_CHSEL11_BITOFFSET_POS (11UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL11" position in register */ +#define ADC_CHSELR_CHSEL12_BITOFFSET_POS (12UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL12" position in register */ +#define ADC_CHSELR_CHSEL13_BITOFFSET_POS (13UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL13" position in register */ +#define ADC_CHSELR_CHSEL14_BITOFFSET_POS (14UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL14" position in register */ +#define ADC_CHSELR_CHSEL15_BITOFFSET_POS (15UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL15" position in register */ +#define ADC_CHSELR_CHSEL16_BITOFFSET_POS (16UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL16" position in register */ +#define ADC_CHSELR_CHSEL17_BITOFFSET_POS (17UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL17" position in register */ +#define ADC_CHSELR_CHSEL18_BITOFFSET_POS (18UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL18" position in register */ +#define ADC_SMPR_SMP1_BITOFFSET_POS ( 0UL) /* Equivalent to bitfield "ADC_SMPR_SMP1" position in register */ +#define ADC_SMPR_SMP2_BITOFFSET_POS ( 4UL) /* Equivalent to bitfield "ADC_SMPR_SMP2" position in register */ +#define ADC_SMPR_SMPSEL0_BITOFFSET_POS ( 8UL) /* Equivalent to bitfield "ADC_SMPR_SMPSEL0" position in register */ + + +/* ADC registers bits groups */ +#define ADC_CR_BITS_PROPERTY_RS (ADC_CR_ADCAL | ADC_CR_ADEN | ADC_CR_ADDIS \ + | ADC_CR_ADSTART | ADC_CR_ADSTP) /* ADC register CR bits with + HW property "rs": Software can read as well as set this bit. + Writing '0' has no effect on the bit value. */ + + +/* ADC internal channels related definitions */ +/* Internal voltage reference VrefInt */ +#define VREFINT_CAL_ADDR ((uint16_t*) (0x1FFF75AAUL)) /* Internal voltage reference, address of + parameter VREFINT_CAL: VrefInt ADC raw data acquired at temperature 30 DegC + (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */ +#define VREFINT_CAL_VREF ( 3000UL) /* Analog voltage reference (Vref+) value + with which VrefInt has been calibrated in production + (tolerance: +-10 mV) (unit: mV). */ +/* Temperature sensor */ +#define TEMPSENSOR_CAL1_ADDR ((uint16_t*) (0x1FFF75A8UL)) /* Address of parameter TS_CAL1: On STM32G0, + temperature sensor ADC raw data acquired at temperature 30 DegC + (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */ +#define TEMPSENSOR_CAL2_ADDR ((uint16_t*) (0x1FFF75CAUL)) /* Address of parameter TS_CAL2: On STM32G0, + temperature sensor ADC raw data acquired at temperature 130 DegC + (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */ +#define TEMPSENSOR_CAL1_TEMP (( int32_t) 30) /* Temperature at which temperature sensor + has been calibrated in production for data into TEMPSENSOR_CAL1_ADDR + (tolerance: +-5 DegC) (unit: DegC). */ +#define TEMPSENSOR_CAL2_TEMP (( int32_t) 130) /* Temperature at which temperature sensor + has been calibrated in production for data into TEMPSENSOR_CAL2_ADDR + (tolerance: +-5 DegC) (unit: DegC). */ +#define TEMPSENSOR_CAL_VREFANALOG ( 3000UL) /* Analog voltage reference (Vref+) value + with which temperature sensor has been calibrated in production + (tolerance: +-10 mV) (unit: mV). */ + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup ADC_LL_Private_Macros ADC Private Macros + * @{ + */ + +/** + * @brief Driver macro reserved for internal use: set a pointer to + * a register from a register basis from which an offset + * is applied. + * @param __REG__ Register basis from which the offset is applied. + * @param __REG_OFFFSET__ Offset to be applied (unit: number of registers). + * @retval Pointer to register address + */ +#define __ADC_PTR_REG_OFFSET(__REG__, __REG_OFFFSET__) \ + ((__IO uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2UL)))) + +/** + * @} + */ + + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup ADC_LL_ES_INIT ADC Exported Init structure + * @{ + */ + +/** + * @brief Structure definition of some features of ADC common parameters + * and multimode + * (all ADC instances belonging to the same ADC common instance). + * @note The setting of these parameters by function @ref LL_ADC_CommonInit() + * is conditioned to ADC instances state (all ADC instances + * sharing the same ADC common instance): + * All ADC instances sharing the same ADC common instance must be + * disabled. + */ +typedef struct +{ + uint32_t CommonClock; /*!< Set parameter common to several ADC: Clock source and prescaler. + This parameter can be a value of @ref ADC_LL_EC_COMMON_CLOCK_SOURCE + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetCommonClock(). */ + +} LL_ADC_CommonInitTypeDef; + +/** + * @brief Structure definition of some features of ADC instance. + * @note These parameters have an impact on ADC scope: ADC instance. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Instance . + * @note The setting of these parameters by function @ref LL_ADC_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 series. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + */ +typedef struct +{ + uint32_t Clock; /*!< Set ADC instance clock source and prescaler. + This parameter can be a value of @ref ADC_LL_EC_CLOCK_SOURCE + @note On this STM32 series, this parameter has some clock ratio constraints: + ADC clock synchronous (from PCLK) with prescaler 1 must be enabled + only if PCLK has a 50% duty clock cycle (APB prescaler configured + inside the RCC must be bypassed and the system clock must by 50% duty + cycle). + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetClock(). + For more details, refer to description of this function. */ + + uint32_t Resolution; /*!< Set ADC resolution. + This parameter can be a value of @ref ADC_LL_EC_RESOLUTION + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetResolution(). */ + + uint32_t DataAlignment; /*!< Set ADC conversion data alignment. + This parameter can be a value of @ref ADC_LL_EC_DATA_ALIGN + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetDataAlignment(). */ + + uint32_t LowPowerMode; /*!< Set ADC low power mode. + This parameter can be a value of @ref ADC_LL_EC_LP_MODE + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetLowPowerMode(). */ + +} LL_ADC_InitTypeDef; + +/** + * @brief Structure definition of some features of ADC group regular. + * @note These parameters have an impact on ADC scope: ADC group regular. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Group_Regular + * (functions with prefix "REG"). + * @note The setting of these parameters by function @ref LL_ADC_REG_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 series. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + */ +typedef struct +{ + uint32_t TriggerSource; /*!< Set ADC group regular conversion trigger source: internal (SW start) or + from external peripheral (timer event, external interrupt line). + This parameter can be a value of @ref ADC_LL_EC_REG_TRIGGER_SOURCE + @note On this STM32 series, setting trigger source to external trigger also + set trigger polarity to rising edge(default setting for compatibility + with some ADC on other STM32 series having this setting set by HW + default value). + In case of need to modify trigger edge, use function + @ref LL_ADC_REG_SetTriggerEdge(). + This feature can be modified afterwards using unitary function + @ref LL_ADC_REG_SetTriggerSource(). */ + + uint32_t SequencerLength; /*!< Set ADC group regular sequencer length. + @note This parameter has an effect only if group regular sequencer is set + to mode "fully configurable". Refer to function + @ref LL_ADC_REG_SetSequencerConfigurable(). + This parameter can be a value of @ref ADC_LL_EC_REG_SEQ_SCAN_LENGTH + This feature can be modified afterwards using unitary function + @ref LL_ADC_REG_SetSequencerLength(). */ + + uint32_t SequencerDiscont; /*!< Set ADC group regular sequencer discontinuous mode: sequence subdivided + and scan conversions interrupted every selected number of ranks. + This parameter can be a value of @ref ADC_LL_EC_REG_SEQ_DISCONT_MODE + @note This parameter has an effect only if group regular sequencer is + enabled (depending on the sequencer mode: scan length of 2 ranks or + more, or several ADC channels enabled in group regular sequencer. + Refer to function @ref LL_ADC_REG_SetSequencerConfigurable() ). + This feature can be modified afterwards using unitary function + @ref LL_ADC_REG_SetSequencerDiscont(). */ + + uint32_t ContinuousMode; /*!< Set ADC continuous conversion mode on ADC group regular, whether ADC + conversions are performed in single mode (one conversion per trigger) or in + continuous mode (after the first trigger, following conversions launched + successively automatically). + This parameter can be a value of @ref ADC_LL_EC_REG_CONTINUOUS_MODE + Note: It is not possible to enable both ADC group regular continuous mode + and discontinuous mode. + This feature can be modified afterwards using unitary function + @ref LL_ADC_REG_SetContinuousMode(). */ + + uint32_t DMATransfer; /*!< Set ADC group regular conversion data transfer: no transfer or transfer + by DMA, and DMA requests mode. + This parameter can be a value of @ref ADC_LL_EC_REG_DMA_TRANSFER + This feature can be modified afterwards using unitary function + @ref LL_ADC_REG_SetDMATransfer(). */ + + uint32_t Overrun; /*!< Set ADC group regular behavior in case of overrun: + data preserved or overwritten. + This parameter can be a value of @ref ADC_LL_EC_REG_OVR_DATA_BEHAVIOR + This feature can be modified afterwards using unitary function + @ref LL_ADC_REG_SetOverrun(). */ + +} LL_ADC_REG_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup ADC_LL_Exported_Constants ADC Exported Constants + * @{ + */ + +/** @defgroup ADC_LL_EC_FLAG ADC flags + * @brief Flags defines which can be used with LL_ADC_ReadReg function + * @{ + */ +#define LL_ADC_FLAG_ADRDY ADC_ISR_ADRDY /*!< ADC flag ADC instance ready */ +#define LL_ADC_FLAG_CCRDY ADC_ISR_CCRDY /*!< ADC flag ADC channel configuration ready */ +#define LL_ADC_FLAG_EOC ADC_ISR_EOC /*!< ADC flag ADC group regular end of unitary + conversion */ +#define LL_ADC_FLAG_EOS ADC_ISR_EOS /*!< ADC flag ADC group regular end of sequence + conversions */ +#define LL_ADC_FLAG_OVR ADC_ISR_OVR /*!< ADC flag ADC group regular overrun */ +#define LL_ADC_FLAG_EOSMP ADC_ISR_EOSMP /*!< ADC flag ADC group regular end of sampling phase */ +#define LL_ADC_FLAG_AWD1 ADC_ISR_AWD1 /*!< ADC flag ADC analog watchdog 1 */ +#define LL_ADC_FLAG_AWD2 ADC_ISR_AWD2 /*!< ADC flag ADC analog watchdog 2 */ +#define LL_ADC_FLAG_AWD3 ADC_ISR_AWD3 /*!< ADC flag ADC analog watchdog 3 */ +#define LL_ADC_FLAG_EOCAL ADC_ISR_EOCAL /*!< ADC flag end of calibration */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_IT ADC interruptions for configuration (interruption enable or disable) + * @brief IT defines which can be used with LL_ADC_ReadReg and LL_ADC_WriteReg functions + * @{ + */ +#define LL_ADC_IT_ADRDY ADC_IER_ADRDYIE /*!< ADC interruption ADC instance ready */ +#define LL_ADC_IT_CCRDY ADC_IER_CCRDYIE /*!< ADC interruption channel configuration ready */ +#define LL_ADC_IT_EOC ADC_IER_EOCIE /*!< ADC interruption ADC group regular end of unitary + conversion */ +#define LL_ADC_IT_EOS ADC_IER_EOSIE /*!< ADC interruption ADC group regular end of sequence + conversions */ +#define LL_ADC_IT_OVR ADC_IER_OVRIE /*!< ADC interruption ADC group regular overrun */ +#define LL_ADC_IT_EOSMP ADC_IER_EOSMPIE /*!< ADC interruption ADC group regular end of sampling + phase */ +#define LL_ADC_IT_AWD1 ADC_IER_AWD1IE /*!< ADC interruption ADC analog watchdog 1 */ +#define LL_ADC_IT_AWD2 ADC_IER_AWD2IE /*!< ADC interruption ADC analog watchdog 2 */ +#define LL_ADC_IT_AWD3 ADC_IER_AWD3IE /*!< ADC interruption ADC analog watchdog 3 */ +#define LL_ADC_IT_EOCAL ADC_IER_EOCALIE /*!< ADC interruption ADC end of calibration */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REGISTERS ADC registers compliant with specific purpose + * @{ + */ +/* List of ADC registers intended to be used (most commonly) with */ +/* DMA transfer. */ +/* Refer to function @ref LL_ADC_DMA_GetRegAddr(). */ +#define LL_ADC_DMA_REG_REGULAR_DATA (0x00000000UL) /* ADC group regular conversion data register + (corresponding to register DR) to be used with ADC configured in independent + mode. Without DMA transfer, register accessed by LL function + @ref LL_ADC_REG_ReadConversionData32() and other + functions @ref LL_ADC_REG_ReadConversionDatax() */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_COMMON_CLOCK_SOURCE ADC common - Clock source + * @{ + */ +#define LL_ADC_CLOCK_ASYNC_DIV1 (0x00000000UL) /*!< ADC asynchronous clock without + prescaler */ +#define LL_ADC_CLOCK_ASYNC_DIV2 (ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with + prescaler division by 2. Setting common to ADC instances of ADC common + group, applied ADC instance wise to each instance clock set to clock source + asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV4 (ADC_CCR_PRESC_1) /*!< ADC asynchronous clock with + prescaler division by 4. Setting common to ADC instances of ADC common + group, applied ADC instance wise to each instance clock set to clock source + asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV6 (ADC_CCR_PRESC_1 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with + prescaler division by 6. Setting common to ADC instances of ADC common + group, applied ADC instance wise to each instance clock set to clock source + asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV8 (ADC_CCR_PRESC_2) /*!< ADC asynchronous clock with + prescaler division by 8. Setting common to ADC instances of ADC common + group, applied ADC instance wise to each instance clock set to clock source + asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV10 (ADC_CCR_PRESC_2 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with + prescaler division by 10. Setting common to ADC instances of ADC common + group, applied ADC instance wise to each instance clock set to clock source + asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV12 (ADC_CCR_PRESC_2 | ADC_CCR_PRESC_1) /*!< ADC asynchronous clock with + prescaler division by 12. Setting common to ADC instances of ADC common + group, applied ADC instance wise to each instance clock set to clock source + asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV16 (ADC_CCR_PRESC_2 | ADC_CCR_PRESC_1 \ + | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with + prescaler division by 16. Setting common to ADC instances of ADC common + group, applied ADC instance wise to each instance clock set to clock source + asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV32 (ADC_CCR_PRESC_3) /*!< ADC asynchronous clock with + prescaler division by 32. Setting common to ADC instances of ADC common + group, applied ADC instance wise to each instance clock set to clock source + asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV64 (ADC_CCR_PRESC_3 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with + prescaler division by 64. Setting common to ADC instances of ADC common + group, applied ADC instance wise to each instance clock set to clock source + asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV128 (ADC_CCR_PRESC_3 | ADC_CCR_PRESC_1) /*!< ADC asynchronous clock with + prescaler division by 128. Setting common to ADC instances of ADC common + group, applied ADC instance wise to each instance clock set to clock source + asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV256 (ADC_CCR_PRESC_3 | ADC_CCR_PRESC_1 \ + | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with + prescaler division by 256. Setting common to ADC instances of ADC common + group, applied ADC instance wise to each instance clock set to clock source + asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_COMMON_CLOCK_FREQ_MODE ADC common - Clock frequency mode + * @{ + */ +#define LL_ADC_CLOCK_FREQ_MODE_HIGH (0x00000000UL) /*!< ADC clock mode to high frequency. + On STM32G0, ADC clock frequency above 3.5MHz. */ +#define LL_ADC_CLOCK_FREQ_MODE_LOW (ADC_CCR_LFMEN) /*!< ADC clock mode to low frequency. + On STM32G0,ADC clock frequency below 3.5MHz. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_COMMON_PATH_INTERNAL ADC common - Measurement path to internal channels + * @{ + */ +/* Note: Other measurement paths to internal channels may be available */ +/* (connections to other peripherals). */ +/* If they are not listed below, they do not require any specific */ +/* path enable. In this case, Access to measurement path is done */ +/* only by selecting the corresponding ADC internal channel. */ +#define LL_ADC_PATH_INTERNAL_NONE (0x00000000UL) /*!< ADC measurement paths all disabled */ +#define LL_ADC_PATH_INTERNAL_VREFINT (ADC_CCR_VREFEN) /*!< ADC measurement path to internal channel VrefInt */ +#define LL_ADC_PATH_INTERNAL_TEMPSENSOR (ADC_CCR_TSEN) /*!< ADC measurement path to internal channel + temperature sensor */ +#define LL_ADC_PATH_INTERNAL_VBAT (ADC_CCR_VBATEN) /*!< ADC measurement path to internal channel Vbat */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_CLOCK_SOURCE ADC instance - Clock source + * @{ + */ +#define LL_ADC_CLOCK_SYNC_PCLK_DIV4 (ADC_CFGR2_CKMODE_1) /*!< ADC synchronous clock derived from AHB clock + divided by 4 */ +#define LL_ADC_CLOCK_SYNC_PCLK_DIV2 (ADC_CFGR2_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock + divided by 2 */ +#define LL_ADC_CLOCK_SYNC_PCLK_DIV1 (ADC_CFGR2_CKMODE_1 \ + | ADC_CFGR2_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock + not divided */ +#define LL_ADC_CLOCK_ASYNC (0x00000000UL) /*!< ADC asynchronous clock. Asynchronous clock + prescaler can be configured using function @ref LL_ADC_SetCommonClock(). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_RESOLUTION ADC instance - Resolution + * @{ + */ +#define LL_ADC_RESOLUTION_12B (0x00000000UL) /*!< ADC resolution 12 bits */ +#define LL_ADC_RESOLUTION_10B ( ADC_CFGR1_RES_0) /*!< ADC resolution 10 bits */ +#define LL_ADC_RESOLUTION_8B (ADC_CFGR1_RES_1 ) /*!< ADC resolution 8 bits */ +#define LL_ADC_RESOLUTION_6B (ADC_CFGR1_RES_1 | ADC_CFGR1_RES_0) /*!< ADC resolution 6 bits */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_DATA_ALIGN ADC instance - Data alignment + * @{ + */ +#define LL_ADC_DATA_ALIGN_RIGHT (0x00000000UL) /*!< ADC conversion data alignment: right aligned + (alignment on data register LSB bit 0)*/ +#define LL_ADC_DATA_ALIGN_LEFT (ADC_CFGR1_ALIGN) /*!< ADC conversion data alignment: left aligned + (alignment on data register MSB bit 15)*/ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_LP_MODE ADC instance - Low power mode + * @{ + */ +#define LL_ADC_LP_MODE_NONE (0x00000000UL) /*!< No ADC low power mode activated */ +#define LL_ADC_LP_AUTOWAIT (ADC_CFGR1_WAIT) /*!< ADC low power mode auto delay: Dynamic low power + mode, ADC conversions are performed only when necessary + (when previous ADC conversion data is read). + See description with function @ref LL_ADC_SetLowPowerMode(). */ +#define LL_ADC_LP_AUTOPOWEROFF (ADC_CFGR1_AUTOFF) /*!< ADC low power mode auto power-off: the ADC + automatically powers-off after a ADC conversion and automatically wakes up + when a new ADC conversion is triggered (with startup time between trigger + and start of sampling). See description with function + @ref LL_ADC_SetLowPowerMode(). */ +#define LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF (ADC_CFGR1_WAIT | ADC_CFGR1_AUTOFF) /*!< ADC low power modes auto wait +and auto power-off combined. See description with function @ref LL_ADC_SetLowPowerMode(). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_TRIGGER_FREQ ADC group regular - Trigger frequency mode + * @{ + */ +#define LL_ADC_TRIGGER_FREQ_HIGH (0x00000000UL) /*!< ADC trigger frequency mode set to high frequency. + Note: ADC trigger frequency mode must be set to low frequency when a duration + is exceeded before ADC conversion start trigger event (between ADC enable + and ADC conversion start trigger event or between two ADC conversion start + trigger event). + Duration value: Refer to device datasheet, parameter "tIdle". */ +#define LL_ADC_TRIGGER_FREQ_LOW (ADC_CFGR2_LFTRIG) /*!< ADC trigger frequency mode set to low frequency. + Note: ADC trigger frequency mode must be set to low frequency when a duration + is exceeded before ADC conversion start trigger event (between ADC enable + and ADC conversion start trigger event or between two ADC conversion start + trigger event). + Duration value: Refer to device datasheet, parameter "tIdle". */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_SAMPLINGTIME_COMMON ADC instance - Sampling time common to a group of channels + * @{ + */ +#define LL_ADC_SAMPLINGTIME_COMMON_1 (ADC_SMPR_SMP1_BITOFFSET_POS) /*!< Set sampling time common to a group + of channels: sampling time nb 1 */ +#define LL_ADC_SAMPLINGTIME_COMMON_2 (ADC_SMPR_SMP2_BITOFFSET_POS \ + | ADC_SAMPLING_TIME_CH_MASK) /*!< Set sampling time common to a group + of channels: sampling time nb 2 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_GROUPS ADC instance - Groups + * @{ + */ +#define LL_ADC_GROUP_REGULAR (0x00000001UL) /*!< ADC group regular (available on all STM32 devices) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_CHANNEL ADC instance - Channel number + * @{ + */ +#define LL_ADC_CHANNEL_0 (ADC_CHANNEL_0_NUMBER \ + | ADC_CHANNEL_0_BITFIELD ) /*!< ADC channel ADCx_IN0 */ +#define LL_ADC_CHANNEL_1 (ADC_CHANNEL_1_NUMBER \ + | ADC_CHANNEL_1_BITFIELD ) /*!< ADC channel ADCx_IN1 */ +#define LL_ADC_CHANNEL_2 (ADC_CHANNEL_2_NUMBER \ + | ADC_CHANNEL_2_BITFIELD ) /*!< ADC channel ADCx_IN2 */ +#define LL_ADC_CHANNEL_3 (ADC_CHANNEL_3_NUMBER \ + | ADC_CHANNEL_3_BITFIELD ) /*!< ADC channel ADCx_IN3 */ +#define LL_ADC_CHANNEL_4 (ADC_CHANNEL_4_NUMBER \ + | ADC_CHANNEL_4_BITFIELD ) /*!< ADC channel ADCx_IN4 */ +#define LL_ADC_CHANNEL_5 (ADC_CHANNEL_5_NUMBER \ + | ADC_CHANNEL_5_BITFIELD ) /*!< ADC channel ADCx_IN5 */ +#define LL_ADC_CHANNEL_6 (ADC_CHANNEL_6_NUMBER \ + | ADC_CHANNEL_6_BITFIELD ) /*!< ADC channel ADCx_IN6 */ +#define LL_ADC_CHANNEL_7 (ADC_CHANNEL_7_NUMBER \ + | ADC_CHANNEL_7_BITFIELD ) /*!< ADC channel ADCx_IN7 */ +#define LL_ADC_CHANNEL_8 (ADC_CHANNEL_8_NUMBER \ + | ADC_CHANNEL_8_BITFIELD ) /*!< ADC channel ADCx_IN8 */ +#define LL_ADC_CHANNEL_9 (ADC_CHANNEL_9_NUMBER \ + | ADC_CHANNEL_9_BITFIELD ) /*!< ADC channel ADCx_IN9 */ +#define LL_ADC_CHANNEL_10 (ADC_CHANNEL_10_NUMBER \ + | ADC_CHANNEL_10_BITFIELD) /*!< ADC channel ADCx_IN10 */ +#define LL_ADC_CHANNEL_11 (ADC_CHANNEL_11_NUMBER \ + | ADC_CHANNEL_11_BITFIELD) /*!< ADC channel ADCx_IN11 */ +#define LL_ADC_CHANNEL_12 (ADC_CHANNEL_12_NUMBER \ + | ADC_CHANNEL_12_BITFIELD) /*!< ADC channel ADCx_IN12 */ +#define LL_ADC_CHANNEL_13 (ADC_CHANNEL_13_NUMBER \ + | ADC_CHANNEL_13_BITFIELD) /*!< ADC channel ADCx_IN13 */ +#define LL_ADC_CHANNEL_14 (ADC_CHANNEL_14_NUMBER \ + | ADC_CHANNEL_14_BITFIELD) /*!< ADC channel ADCx_IN14 */ +#define LL_ADC_CHANNEL_15 (ADC_CHANNEL_15_NUMBER \ + | ADC_CHANNEL_15_BITFIELD) /*!< ADC channel ADCx_IN15 */ +#define LL_ADC_CHANNEL_16 (ADC_CHANNEL_16_NUMBER \ + | ADC_CHANNEL_16_BITFIELD) /*!< ADC channel ADCx_IN16 */ +#define LL_ADC_CHANNEL_17 (ADC_CHANNEL_17_NUMBER \ + | ADC_CHANNEL_17_BITFIELD) /*!< ADC channel ADCx_IN17 */ +#define LL_ADC_CHANNEL_18 (ADC_CHANNEL_18_NUMBER \ + | ADC_CHANNEL_18_BITFIELD) /*!< ADC channel ADCx_IN18 */ +#define LL_ADC_CHANNEL_VREFINT (LL_ADC_CHANNEL_13 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel + connected to VrefInt: Internal voltage reference. */ +#define LL_ADC_CHANNEL_TEMPSENSOR (LL_ADC_CHANNEL_12 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel + connected to Temperature sensor. */ +#define LL_ADC_CHANNEL_VBAT (LL_ADC_CHANNEL_14 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel + connected to Vbat/4: Vbat voltage through a divider ladder of factor 1/3 + to have channel voltage always below Vdda. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_TRIGGER_SOURCE ADC group regular - Trigger source + * @{ + */ +#define LL_ADC_REG_TRIG_SOFTWARE (0x00000000UL) /*!< ADC group regular + conversion trigger internal: SW start. */ +#define LL_ADC_REG_TRIG_EXT_TIM1_TRGO2 (ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM1 TRGO. + Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM1_CH4 (ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM1 channel 4 event + (capture compare: input capture or output capture). + Trigger edge set to rising edge (default setting). */ +#if defined(TIM2) +#define LL_ADC_REG_TRIG_EXT_TIM2_TRGO (ADC_CFGR1_EXTSEL_1\ + | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM2 TRGO. + Trigger edge set to rising edge (default setting). */ +#endif /* TIM2 */ +#define LL_ADC_REG_TRIG_EXT_TIM3_TRGO (ADC_CFGR1_EXTSEL_1 | ADC_CFGR1_EXTSEL_0 | \ + ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM3 TRGO. + Trigger edge set to rising edge (default setting). */ +#if defined(TIM4) +#define LL_ADC_REG_TRIG_EXT_TIM4_TRGO (ADC_CFGR1_EXTSEL_2 | ADC_CFGR1_EXTSEL_1 | \ + ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM4 TRGO. + Trigger edge set to rising edge (default setting). */ +#endif /* TIM4 */ +#if defined(TIM6) +#define LL_ADC_REG_TRIG_EXT_TIM6_TRGO (ADC_CFGR1_EXTSEL_2 | ADC_CFGR1_EXTSEL_0 | \ + ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM6 TRGO. + Trigger edge set to rising edge (default setting). */ +#endif /* TIM6 */ +#if defined(TIM15) +#define LL_ADC_REG_TRIG_EXT_TIM15_TRGO (ADC_CFGR1_EXTSEL_2 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM15 TRGO. + Trigger edge set to rising edge (default setting). */ +#endif /* TIM15 */ +#define LL_ADC_REG_TRIG_EXT_EXTI_LINE11 (ADC_CFGR1_EXTSEL_2 | ADC_CFGR1_EXTSEL_1 | \ + ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: external interrupt line 11. + Trigger edge set to rising edge (default setting). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_TRIGGER_EDGE ADC group regular - Trigger edge + * @{ + */ +#define LL_ADC_REG_TRIG_EXT_RISING (ADC_CFGR1_EXTEN_0) /*!< ADC group regular conversion + trigger polarity set to rising edge */ +#define LL_ADC_REG_TRIG_EXT_FALLING (ADC_CFGR1_EXTEN_1) /*!< ADC group regular conversion + trigger polarity set to falling edge */ +#define LL_ADC_REG_TRIG_EXT_RISINGFALLING (ADC_CFGR1_EXTEN_1 | ADC_CFGR1_EXTEN_0) /*!< ADC group regular conversion + trigger polarity set to both rising and falling edges */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_CONTINUOUS_MODE ADC group regular - Continuous mode + * @{ + */ +#define LL_ADC_REG_CONV_SINGLE (0x00000000UL) /*!< ADC conversions performed in single mode: + one conversion per trigger */ +#define LL_ADC_REG_CONV_CONTINUOUS (ADC_CFGR1_CONT) /*!< ADC conversions performed in continuous mode: + after the first trigger, following conversions launched successively + automatically */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_DMA_TRANSFER ADC group regular - DMA transfer of ADC conversion data + * @{ + */ +#define LL_ADC_REG_DMA_TRANSFER_NONE (0x00000000UL) /*!< ADC conversions are not transferred by DMA */ +#define LL_ADC_REG_DMA_TRANSFER_LIMITED (ADC_CFGR1_DMAEN) /*!< ADC conversion data are transferred by DMA, + in limited mode (one shot mode): DMA transfer requests are stopped when + number of DMA data transfers (number of ADC conversions) is reached. + This ADC mode is intended to be used with DMA mode non-circular. */ +#define LL_ADC_REG_DMA_TRANSFER_UNLIMITED (ADC_CFGR1_DMACFG | ADC_CFGR1_DMAEN) /*!< ADC conversion data are + transferred by DMA, in unlimited mode: DMA transfer requests are unlimited, + whatever number of DMA data transferred (number of ADC conversions). + This ADC mode is intended to be used with DMA mode circular. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_OVR_DATA_BEHAVIOR ADC group regular - Overrun behavior on conversion data + * @{ + */ +#define LL_ADC_REG_OVR_DATA_PRESERVED (0x00000000UL) /*!< ADC group regular behavior in case of overrun: + data preserved */ +#define LL_ADC_REG_OVR_DATA_OVERWRITTEN (ADC_CFGR1_OVRMOD) /*!< ADC group regular behavior in case of overrun: + data overwritten */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_MODE ADC group regular - Sequencer configuration flexibility + * @{ + */ +#define LL_ADC_REG_SEQ_FIXED (0x00000000UL) /*!< Sequencer configured to not fully configurable: + sequencer length and each rank affectation to a channel are fixed + by channel HW number. Refer to description of function + @ref LL_ADC_REG_SetSequencerChannels(). */ +#define LL_ADC_REG_SEQ_CONFIGURABLE (ADC_CFGR1_CHSELRMOD) /*!< Sequencer configured to fully configurable: + sequencer length and each rank affectation to a channel are configurable. + Refer to description of function @ref LL_ADC_REG_SetSequencerLength(). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_SCAN_LENGTH ADC group regular - Sequencer scan length + * @{ + */ +#define LL_ADC_REG_SEQ_SCAN_DISABLE (ADC_CHSELR_SQ2) /*!< ADC group regular sequencer disable + (equivalent to sequencer of 1 rank: ADC conversion on only 1 channel) */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS (ADC_CHSELR_SQ3) /*!< ADC group regular sequencer enable + with 2 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS (ADC_CHSELR_SQ4) /*!< ADC group regular sequencer enable + with 3 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS (ADC_CHSELR_SQ5) /*!< ADC group regular sequencer enable + with 4 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS (ADC_CHSELR_SQ6) /*!< ADC group regular sequencer enable + with 5 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS (ADC_CHSELR_SQ7) /*!< ADC group regular sequencer enable + with 6 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS (ADC_CHSELR_SQ8) /*!< ADC group regular sequencer enable + with 7 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS (0x00000000UL) /*!< ADC group regular sequencer enable + with 8 ranks in the sequence */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_SCAN_DIRECTION ADC group regular - Sequencer scan direction + * @{ + */ +#define LL_ADC_REG_SEQ_SCAN_DIR_FORWARD (0x00000000UL) /*!< On this STM32 series, parameter relevant only if + sequencer set to mode not fully configurable, refer to function + @ref LL_ADC_REG_SetSequencerConfigurable(). ADC group regular sequencer scan + direction forward: from lowest channel number to highest channel number + (scan of all ranks, ADC conversion of ranks with channels enabled in + sequencer). On some other STM32 series, this setting is not available + and the default scan direction is forward. */ +#define LL_ADC_REG_SEQ_SCAN_DIR_BACKWARD (ADC_CFGR1_SCANDIR) /*!< On this STM32 series, parameter relevant only if + sequencer set to mode not fully configurable, refer to function + @ref LL_ADC_REG_SetSequencerConfigurable(). ADC group regular sequencer scan + direction backward: from highest channel number to lowest channel number + (scan of all ranks, ADC conversion of ranks with channels enabled in + sequencer) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_DISCONT_MODE ADC group regular - Sequencer discontinuous mode + * @{ + */ +#define LL_ADC_REG_SEQ_DISCONT_DISABLE (0x00000000UL) /*!< ADC group regular sequencer + discontinuous mode disable */ +#define LL_ADC_REG_SEQ_DISCONT_1RANK (ADC_CFGR1_DISCEN) /*!< ADC group regular sequencer + discontinuous mode enable with sequence interruption every rank */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_RANKS ADC group regular - Sequencer ranks + * @{ + */ +#define LL_ADC_REG_RANK_1 (ADC_REG_RANK_1_SQRX_BITOFFSET_POS) /*!< ADC group regular seq. rank 1 */ +#define LL_ADC_REG_RANK_2 (ADC_REG_RANK_2_SQRX_BITOFFSET_POS) /*!< ADC group regular seq. rank 2 */ +#define LL_ADC_REG_RANK_3 (ADC_REG_RANK_3_SQRX_BITOFFSET_POS) /*!< ADC group regular seq. rank 3 */ +#define LL_ADC_REG_RANK_4 (ADC_REG_RANK_4_SQRX_BITOFFSET_POS) /*!< ADC group regular seq. rank 4 */ +#define LL_ADC_REG_RANK_5 (ADC_REG_RANK_5_SQRX_BITOFFSET_POS) /*!< ADC group regular seq. rank 5 */ +#define LL_ADC_REG_RANK_6 (ADC_REG_RANK_6_SQRX_BITOFFSET_POS) /*!< ADC group regular seq. rank 6 */ +#define LL_ADC_REG_RANK_7 (ADC_REG_RANK_7_SQRX_BITOFFSET_POS) /*!< ADC group regular seq. rank 7 */ +#define LL_ADC_REG_RANK_8 (ADC_REG_RANK_8_SQRX_BITOFFSET_POS) /*!< ADC group regular seq. rank 8 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_CHANNEL_SAMPLINGTIME Channel - Sampling time + * @{ + */ +#define LL_ADC_SAMPLINGTIME_1CYCLE_5 (0x00000000UL) /*!< Sampling time 1.5 ADC clock cycle */ +#define LL_ADC_SAMPLINGTIME_3CYCLES_5 (ADC_SMPR_SMP1_0) /*!< Sampling time 3.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_7CYCLES_5 (ADC_SMPR_SMP1_1) /*!< Sampling time 7.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_12CYCLES_5 (ADC_SMPR_SMP1_1 \ + | ADC_SMPR_SMP1_0) /*!< Sampling time 12.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_19CYCLES_5 (ADC_SMPR_SMP1_2) /*!< Sampling time 19.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_39CYCLES_5 (ADC_SMPR_SMP1_2 \ + | ADC_SMPR_SMP1_0) /*!< Sampling time 39.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_79CYCLES_5 (ADC_SMPR_SMP1_2 \ + | ADC_SMPR_SMP1_1) /*!< Sampling time 79.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_160CYCLES_5 (ADC_SMPR_SMP1_2 \ + | ADC_SMPR_SMP1_1 \ + | ADC_SMPR_SMP1_0) /*!< Sampling time 160.5 ADC clock cycles */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_AWD_NUMBER Analog watchdog - Analog watchdog number + * @{ + */ +#define LL_ADC_AWD1 (ADC_AWD_CR1_CHANNEL_MASK \ + | ADC_AWD_CR1_REGOFFSET) /*!< ADC analog watchdog number 1 */ +#define LL_ADC_AWD2 (ADC_AWD_CR23_CHANNEL_MASK \ + | ADC_AWD_CR2_REGOFFSET) /*!< ADC analog watchdog number 2 */ +#define LL_ADC_AWD3 (ADC_AWD_CR23_CHANNEL_MASK \ + | ADC_AWD_CR3_REGOFFSET) /*!< ADC analog watchdog number 3 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_AWD_CHANNELS Analog watchdog - Monitored channels + * @{ + */ +#define LL_ADC_AWD_DISABLE (0x00000000UL) /*!< ADC analog watchdog monitoring + disabled */ +#define LL_ADC_AWD_ALL_CHANNELS_REG (ADC_AWD_CR23_CHANNEL_MASK \ + | ADC_CFGR1_AWD1EN) /*!< ADC analog watchdog monitoring + of all channels, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_0_REG ((LL_ADC_CHANNEL_0 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN0, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_1_REG ((LL_ADC_CHANNEL_1 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN1, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_2_REG ((LL_ADC_CHANNEL_2 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN2, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_3_REG ((LL_ADC_CHANNEL_3 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN3, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_4_REG ((LL_ADC_CHANNEL_4 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN4, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_5_REG ((LL_ADC_CHANNEL_5 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN5, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_6_REG ((LL_ADC_CHANNEL_6 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN6, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_7_REG ((LL_ADC_CHANNEL_7 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN7, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_8_REG ((LL_ADC_CHANNEL_8 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN8, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_9_REG ((LL_ADC_CHANNEL_9 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN9, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_10_REG ((LL_ADC_CHANNEL_10 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN10, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_11_REG ((LL_ADC_CHANNEL_11 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN11, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_12_REG ((LL_ADC_CHANNEL_12 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN12, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_13_REG ((LL_ADC_CHANNEL_13 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN13, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_14_REG ((LL_ADC_CHANNEL_14 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN14, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_15_REG ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN15, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_16_REG ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN16, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_17_REG ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN17, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_18_REG ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN18, converted by group regular only */ +#define LL_ADC_AWD_CH_VREFINT_REG ((LL_ADC_CHANNEL_VREFINT & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC internal channel connected to VrefInt: Internal + voltage reference, converted by group regular only */ +#define LL_ADC_AWD_CH_TEMPSENSOR_REG ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC internal channel connected to internal temperature sensor, + converted by group regular only */ +#define LL_ADC_AWD_CH_VBAT_REG ((LL_ADC_CHANNEL_VBAT & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC internal channel connected to Vbat/3: Vbat + voltage through a divider ladder of factor 1/3 to have channel voltage always + below Vdda, converted by group regular only */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_AWD_THRESHOLDS Analog watchdog - Thresholds + * @{ + */ +#define LL_ADC_AWD_THRESHOLD_HIGH (ADC_AWD1TR_HT1) /*!< ADC analog watchdog threshold high */ +#define LL_ADC_AWD_THRESHOLD_LOW (ADC_AWD1TR_LT1) /*!< ADC analog watchdog threshold low */ +#define LL_ADC_AWD_THRESHOLDS_HIGH_LOW (ADC_AWD1TR_HT1 \ + | ADC_AWD1TR_LT1) /*!< ADC analog watchdog both thresholds high and low + concatenated into the same data */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OVS_SCOPE Oversampling - Oversampling scope + * @{ + */ +#define LL_ADC_OVS_DISABLE (0x00000000UL) /*!< ADC oversampling disabled. */ +#define LL_ADC_OVS_GRP_REGULAR_CONTINUED (ADC_CFGR2_OVSE) /*!< ADC oversampling on conversions of + ADC group regular. Literal suffix "continued" is kept for compatibility + with other STM32 devices featuring ADC group injected, in this case other + oversampling scope parameters are available. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OVS_DISCONT_MODE Oversampling - Discontinuous mode + * @{ + */ +#define LL_ADC_OVS_REG_CONT (0x00000000UL) /*!< ADC oversampling discontinuous mode: continuous mode +(all conversions of oversampling ratio are done from 1 trigger) */ +#define LL_ADC_OVS_REG_DISCONT (ADC_CFGR2_TOVS) /*!< ADC oversampling discontinuous mode: discontinuous + mode (each conversion of oversampling ratio needs a trigger) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OVS_RATIO Oversampling - Ratio + * @{ + */ +#define LL_ADC_OVS_RATIO_2 (0x00000000UL) /*!< ADC oversampling ratio of 2 + (sum of conversions data computed to result as oversampling conversion data + (before potential shift) */ +#define LL_ADC_OVS_RATIO_4 (ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 4 + (sum of conversions data computed to result as oversampling conversion data + (before potential shift) */ +#define LL_ADC_OVS_RATIO_8 (ADC_CFGR2_OVSR_1) /*!< ADC oversampling ratio of 8 + (sum of conversions data computed to result as oversampling conversion data + (before potential shift) */ +#define LL_ADC_OVS_RATIO_16 (ADC_CFGR2_OVSR_1 | ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 16 + (sum of conversions data computed to result as oversampling conversion data + (before potential shift) */ +#define LL_ADC_OVS_RATIO_32 (ADC_CFGR2_OVSR_2) /*!< ADC oversampling ratio of 32 + (sum of conversions data computed to result as oversampling conversion data + (before potential shift) */ +#define LL_ADC_OVS_RATIO_64 (ADC_CFGR2_OVSR_2 | ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 64 + (sum of conversions data computed to result as oversampling conversion data + (before potential shift) */ +#define LL_ADC_OVS_RATIO_128 (ADC_CFGR2_OVSR_2 | ADC_CFGR2_OVSR_1) /*!< ADC oversampling ratio of 128 + (sum of conversions data computed to result as oversampling conversion data + (before potential shift) */ +#define LL_ADC_OVS_RATIO_256 (ADC_CFGR2_OVSR_2 | ADC_CFGR2_OVSR_1 \ + | ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 256 + (sum of conversions data computed to result as oversampling conversion data + (before potential shift) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OVS_SHIFT Oversampling - Data right shift + * @{ + */ +#define LL_ADC_OVS_SHIFT_NONE (0x00000000UL) /*!< ADC oversampling no shift + (sum of the ADC conversions data is not divided to result as oversampling + conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_1 (ADC_CFGR2_OVSS_0) /*!< ADC oversampling right shift of 1 + (sum of the ADC conversions data (after OVS ratio) is divided by 2 + to result as oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_2 (ADC_CFGR2_OVSS_1) /*!< ADC oversampling right shift of 2 + (sum of the ADC conversions data (after OVS ratio) is divided by 4 + to result as oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_3 (ADC_CFGR2_OVSS_1 | ADC_CFGR2_OVSS_0) /*!< ADC oversampling right shift of 3 + (sum of the ADC conversions data (after OVS ratio) is divided by 8 + to result as oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_4 (ADC_CFGR2_OVSS_2) /*!< ADC oversampling right shift of 4 + (sum of the ADC conversions data (after OVS ratio) is divided by 16 + to result as oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_5 (ADC_CFGR2_OVSS_2 | ADC_CFGR2_OVSS_0) /*!< ADC oversampling right shift of 5 + (sum of the ADC conversions data (after OVS ratio) is divided by 32 + to result as oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_6 (ADC_CFGR2_OVSS_2 | ADC_CFGR2_OVSS_1) /*!< ADC oversampling right shift of 6 + (sum of the ADC conversions data (after OVS ratio) is divided by 64 + to result as oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_7 (ADC_CFGR2_OVSS_2 | ADC_CFGR2_OVSS_1 \ + | ADC_CFGR2_OVSS_0) /*!< ADC oversampling right shift of 7 + (sum of the ADC conversions data (after OVS ratio) is divided by 128 + to result as oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_8 (ADC_CFGR2_OVSS_3) /*!< ADC oversampling right shift of 8 + (sum of the ADC conversions data (after OVS ratio) is divided by 256 + to result as oversampling conversion data) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_HELPER_MACRO Definitions of constants used by helper macro + * @{ + */ +#define LL_ADC_TEMPERATURE_CALC_ERROR ((int16_t)0x7FFF) /* Temperature calculation error using helper macro + @ref __LL_ADC_CALC_TEMPERATURE(), due to issue on + calibration parameters. This value is coded on 16 bits + (to fit on signed word or double word) and corresponds + to an inconsistent temperature value. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_HW_DELAYS Definitions of ADC hardware constraints delays + * @note Only ADC peripheral HW delays are defined in ADC LL driver driver, + * not timeout values. + * For details on delays values, refer to descriptions in source code + * above each literal definition. + * @{ + */ + +/* Note: Only ADC peripheral HW delays are defined in ADC LL driver driver, */ +/* not timeout values. */ +/* Timeout values for ADC operations are dependent to device clock */ +/* configuration (system clock versus ADC clock), */ +/* and therefore must be defined in user application. */ +/* Indications for estimation of ADC timeout delays, for this */ +/* STM32 series: */ +/* - ADC calibration time: maximum delay is 82/fADC. */ +/* (refer to device datasheet, parameter "tCAL") */ +/* - ADC enable time: maximum delay is 1 conversion cycle. */ +/* (refer to device datasheet, parameter "tSTAB") */ +/* - ADC disable time: maximum delay should be a few ADC clock cycles */ +/* - ADC stop conversion time: maximum delay should be a few ADC clock */ +/* cycles */ +/* - ADC conversion time: duration depending on ADC clock and ADC */ +/* configuration. */ +/* (refer to device reference manual, section "Timing") */ + +/* Delay for ADC stabilization time (ADC voltage regulator start-up time) */ +/* Delay set to maximum value (refer to device datasheet, */ +/* parameter "tADCVREG_STUP"). */ +/* Unit: us */ +#define LL_ADC_DELAY_INTERNAL_REGUL_STAB_US ( 20UL) /*!< Delay for ADC stabilization time (ADC voltage + regulator start-up time) */ + +/* Delay for internal voltage reference stabilization time. */ +/* Delay set to maximum value (refer to device datasheet, */ +/* parameter "tstart_vrefint"). */ +/* Unit: us */ +#define LL_ADC_DELAY_VREFINT_STAB_US ( 12UL) /*!< Delay for internal voltage reference stabilization + time */ + +/* Delay for temperature sensor stabilization time. */ +/* Literal set to maximum value (refer to device datasheet, */ +/* parameter "tSTART"). */ +/* Unit: us */ +#define LL_ADC_DELAY_TEMPSENSOR_STAB_US (120UL) /*!< Delay for temperature sensor stabilization time + (starting from temperature sensor enable, refer to + @ref LL_ADC_SetCommonPathInternalCh()) */ +#define LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US ( 15UL) /*!< Delay for temperature sensor buffer stabilization + time (starting from ADC enable, refer to + @ref LL_ADC_Enable()) */ + +/* Delay required between ADC end of calibration and ADC enable. */ +/* Note: On this STM32 series, a minimum number of ADC clock cycles */ +/* are required between ADC end of calibration and ADC enable. */ +/* Wait time can be computed in user application by waiting for the */ +/* equivalent number of CPU cycles, by taking into account */ +/* ratio of CPU clock versus ADC clock prescalers. */ +/* Unit: ADC clock cycles. */ +#define LL_ADC_DELAY_CALIB_ENABLE_ADC_CYCLES ( 2UL) /*!< Delay required between ADC end of calibration + and ADC enable */ + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup ADC_LL_Exported_Macros ADC Exported Macros + * @{ + */ + +/** @defgroup ADC_LL_EM_WRITE_READ Common write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in ADC register + * @param __INSTANCE__ ADC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_ADC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in ADC register + * @param __INSTANCE__ ADC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_ADC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup ADC_LL_EM_HELPER_MACRO ADC helper macro + * @{ + */ + +/** + * @brief Helper macro to get ADC channel number in decimal format + * from literals LL_ADC_CHANNEL_x. + * @note Example: + * __LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_CHANNEL_4) + * will return decimal number "4". + * @note The input can be a value from functions where a channel + * number is returned, either defined with number + * or with bitfield (only one bit must be set). + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval Value between Min_Data=0 and Max_Data=18 + */ +#define __LL_ADC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \ + ((((__CHANNEL__) & ADC_CHANNEL_ID_BITFIELD_MASK) == 0UL) ? \ + ( \ + ((__CHANNEL__) & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS \ + ) \ + : \ + ((((__CHANNEL__) & ADC_CHANNEL_0_BITFIELD) == ADC_CHANNEL_0_BITFIELD) ? (0UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_1_BITFIELD) == ADC_CHANNEL_1_BITFIELD) ? (1UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_2_BITFIELD) == ADC_CHANNEL_2_BITFIELD) ? (2UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_3_BITFIELD) == ADC_CHANNEL_3_BITFIELD) ? (3UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_4_BITFIELD) == ADC_CHANNEL_4_BITFIELD) ? (4UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_5_BITFIELD) == ADC_CHANNEL_5_BITFIELD) ? (5UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_6_BITFIELD) == ADC_CHANNEL_6_BITFIELD) ? (6UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_7_BITFIELD) == ADC_CHANNEL_7_BITFIELD) ? (7UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_8_BITFIELD) == ADC_CHANNEL_8_BITFIELD) ? (8UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_9_BITFIELD) == ADC_CHANNEL_9_BITFIELD) ? (9UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_10_BITFIELD) == ADC_CHANNEL_10_BITFIELD) ? (10UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_11_BITFIELD) == ADC_CHANNEL_11_BITFIELD) ? (11UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_12_BITFIELD) == ADC_CHANNEL_12_BITFIELD) ? (12UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_13_BITFIELD) == ADC_CHANNEL_13_BITFIELD) ? (13UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_14_BITFIELD) == ADC_CHANNEL_14_BITFIELD) ? (14UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_15_BITFIELD) == ADC_CHANNEL_15_BITFIELD) ? (15UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_16_BITFIELD) == ADC_CHANNEL_16_BITFIELD) ? (16UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_17_BITFIELD) == ADC_CHANNEL_17_BITFIELD) ? (17UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_18_BITFIELD) == ADC_CHANNEL_18_BITFIELD) ? (18UL) : \ + (0UL))))))))))))))))))))) + +/** + * @brief Helper macro to get ADC channel in literal format LL_ADC_CHANNEL_x + * from number in decimal format. + * @note Example: + * __LL_ADC_DECIMAL_NB_TO_CHANNEL(4) + * will return a data equivalent to "LL_ADC_CHANNEL_4". + * @param __DECIMAL_NB__ Value between Min_Data=0 and Max_Data=18 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (2) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref LL_ADC_CHANNEL_VBAT (2) + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + */ +#define __LL_ADC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ + (((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) | \ + (ADC_CHSELR_CHSEL0 << (__DECIMAL_NB__))) + +/** + * @brief Helper macro to determine whether the selected channel + * corresponds to literal definitions of driver. + * @note The different literal definitions of ADC channels are: + * - ADC internal channel: + * LL_ADC_CHANNEL_VREFINT, LL_ADC_CHANNEL_TEMPSENSOR, ... + * - ADC external channel (channel connected to a GPIO pin): + * LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ... + * @note The channel parameter must be a value defined from literal + * definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT, + * LL_ADC_CHANNEL_TEMPSENSOR, ...), + * ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...), + * must not be a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval Value "0" if the channel corresponds to a parameter definition of a ADC external channel (channel + connected to a GPIO pin). + * Value "1" if the channel corresponds to a parameter definition of a ADC internal channel. + */ +#define __LL_ADC_IS_CHANNEL_INTERNAL(__CHANNEL__) \ + (((__CHANNEL__) & ADC_CHANNEL_ID_INTERNAL_CH_MASK) != 0UL) + +/** + * @brief Helper macro to convert a channel defined from parameter + * definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT, + * LL_ADC_CHANNEL_TEMPSENSOR, ...), + * to its equivalent parameter definition of a ADC external channel + * (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...). + * @note The channel parameter can be, additionally to a value + * defined from parameter definition of a ADC internal channel + * (LL_ADC_CHANNEL_VREFINT, LL_ADC_CHANNEL_TEMPSENSOR, ...), + * a value defined from parameter definition of + * ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is returned + * from ADC registers. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + */ +#define __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(__CHANNEL__) \ + ((__CHANNEL__) & ~ADC_CHANNEL_ID_INTERNAL_CH_MASK) + +/** + * @brief Helper macro to determine whether the internal channel + * selected is available on the ADC instance selected. + * @note The channel parameter must be a value defined from parameter + * definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT, + * LL_ADC_CHANNEL_TEMPSENSOR, ...), + * must not be a value defined from parameter definition of + * ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __ADC_INSTANCE__ ADC instance + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * @retval Value "0" if the internal channel selected is not available on the ADC instance selected. + * Value "1" if the internal channel selected is available on the ADC instance selected. + */ +#define __LL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE(__ADC_INSTANCE__, __CHANNEL__) \ + (((__CHANNEL__) == LL_ADC_CHANNEL_VREFINT) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_TEMPSENSOR) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VBAT)) + +/** + * @brief Helper macro to define ADC analog watchdog parameter: + * define a single channel to monitor with analog watchdog + * from sequencer channel and groups definition. + * @note To be used with function @ref LL_ADC_SetAnalogWDMonitChannels(). + * Example: + * LL_ADC_SetAnalogWDMonitChannels( + * ADC1, LL_ADC_AWD1, + * __LL_ADC_ANALOGWD_CHANNEL_GROUP(LL_ADC_CHANNEL4, LL_ADC_GROUP_REGULAR)) + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (2) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref LL_ADC_CHANNEL_VBAT (2) + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * @param __GROUP__ This parameter can be one of the following values: + * @arg @ref LL_ADC_GROUP_REGULAR + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_AWD_DISABLE + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG + * @arg @ref LL_ADC_AWD_CH_VREFINT_REG + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG + * @arg @ref LL_ADC_AWD_CH_VBAT_REG + */ +#define __LL_ADC_ANALOGWD_CHANNEL_GROUP(__CHANNEL__, __GROUP__) \ + (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) + +/** + * @brief Helper macro to set the value of ADC analog watchdog threshold high + * or low in function of ADC resolution, when ADC resolution is + * different of 12 bits. + * @note To be used with function @ref LL_ADC_ConfigAnalogWDThresholds() + * or @ref LL_ADC_SetAnalogWDThresholds(). + * Example, with a ADC resolution of 8 bits, to set the value of + * analog watchdog threshold high (on 8 bits): + * LL_ADC_SetAnalogWDThresholds + * (< ADCx param >, + * __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(LL_ADC_RESOLUTION_8B, ) + * ); + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @param __AWD_THRESHOLD__ Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +#define __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(__ADC_RESOLUTION__, __AWD_THRESHOLD__) \ + ((__AWD_THRESHOLD__) << ((__ADC_RESOLUTION__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1U ))) + +/** + * @brief Helper macro to get the value of ADC analog watchdog threshold high + * or low in function of ADC resolution, when ADC resolution is + * different of 12 bits. + * @note To be used with function @ref LL_ADC_GetAnalogWDThresholds(). + * Example, with a ADC resolution of 8 bits, to get the value of + * analog watchdog threshold high (on 8 bits): + * < threshold_value_6_bits > = __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION + * (LL_ADC_RESOLUTION_8B, + * LL_ADC_GetAnalogWDThresholds(, LL_ADC_AWD_THRESHOLD_HIGH) + * ); + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @param __AWD_THRESHOLD_12_BITS__ Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +#define __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION(__ADC_RESOLUTION__, __AWD_THRESHOLD_12_BITS__) \ + ((__AWD_THRESHOLD_12_BITS__) >> ((__ADC_RESOLUTION__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1U ))) + +/** + * @brief Helper macro to get the ADC analog watchdog threshold high + * or low from raw value containing both thresholds concatenated. + * @note To be used with function @ref LL_ADC_GetAnalogWDThresholds(). + * Example, to get analog watchdog threshold high from the register raw value: + * __LL_ADC_ANALOGWD_THRESHOLDS_HIGH_LOW(LL_ADC_AWD_THRESHOLD_HIGH, ); + * @param __AWD_THRESHOLD_TYPE__ This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH + * @arg @ref LL_ADC_AWD_THRESHOLD_LOW + * @param __AWD_THRESHOLDS__ Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +#define __LL_ADC_ANALOGWD_THRESHOLDS_HIGH_LOW(__AWD_THRESHOLD_TYPE__, __AWD_THRESHOLDS__) \ + (((__AWD_THRESHOLDS__) >> (((__AWD_THRESHOLD_TYPE__) & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4)) \ + & LL_ADC_AWD_THRESHOLD_LOW) + +/** + * @brief Helper macro to select the ADC common instance + * to which is belonging the selected ADC instance. + * @note ADC common register instance can be used for: + * - Set parameters common to several ADC instances + * - Multimode (for devices with several ADC instances) + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @param __ADCx__ ADC instance + * @retval ADC common register instance + */ +#define __LL_ADC_COMMON_INSTANCE(__ADCx__) \ + (ADC1_COMMON) + +/** + * @brief Helper macro to check if all ADC instances sharing the same + * ADC common instance are disabled. + * @note This check is required by functions with setting conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @note On devices with only 1 ADC common instance, parameter of this macro + * is useless and can be ignored (parameter kept for compatibility + * with devices featuring several ADC common instances). + * @param __ADCXY_COMMON__ ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Value "0" if all ADC instances sharing the same ADC common instance + * are disabled. + * Value "1" if at least one ADC instance sharing the same ADC common instance + * is enabled. + */ +#define __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__ADCXY_COMMON__) \ + LL_ADC_IsEnabled(ADC1) + +/** + * @brief Helper macro to define the ADC conversion data full-scale digital + * value corresponding to the selected ADC resolution. + * @note ADC conversion data full-scale corresponds to voltage range + * determined by analog voltage references Vref+ and Vref- + * (refer to reference manual). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval ADC conversion data full-scale digital value (unit: digital value of ADC conversion data) + */ +#define __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \ + (0xFFFUL >> ((__ADC_RESOLUTION__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1UL))) + +/** + * @brief Helper macro to convert the ADC conversion data from + * a resolution to another resolution. + * @param __DATA__ ADC conversion data to be converted + * @param __ADC_RESOLUTION_CURRENT__ Resolution of the data to be converted + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @param __ADC_RESOLUTION_TARGET__ Resolution of the data after conversion + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval ADC conversion data to the requested resolution + */ +#define __LL_ADC_CONVERT_DATA_RESOLUTION(__DATA__,\ + __ADC_RESOLUTION_CURRENT__,\ + __ADC_RESOLUTION_TARGET__) \ +(((__DATA__) \ + << ((__ADC_RESOLUTION_CURRENT__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1UL))) \ + >> ((__ADC_RESOLUTION_TARGET__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1UL)) \ +) + +/** + * @brief Helper macro to calculate the voltage (unit: mVolt) + * corresponding to a ADC conversion data (unit: digital value). + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __ADC_DATA__ ADC conversion data (resolution 12 bits) + * (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __LL_ADC_CALC_DATA_TO_VOLTAGE(__VREFANALOG_VOLTAGE__,\ + __ADC_DATA__,\ + __ADC_RESOLUTION__) \ +((__ADC_DATA__) * (__VREFANALOG_VOLTAGE__) \ + / __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \ +) + +/** + * @brief Helper macro to calculate analog reference voltage (Vref+) + * (unit: mVolt) from ADC conversion data of internal voltage + * reference VrefInt. + * @note Computation is using VrefInt calibration value + * stored in system memory for each device during production. + * @note This voltage depends on user board environment: voltage level + * connected to pin Vref+. + * On devices with small package, the pin Vref+ is not present + * and internally bonded to pin Vdda. + * @note On this STM32 series, calibration data of internal voltage reference + * VrefInt corresponds to a resolution of 12 bits, + * this is the recommended ADC resolution to convert voltage of + * internal voltage reference VrefInt. + * Otherwise, this macro performs the processing to scale + * ADC conversion data to 12 bits. + * @param __VREFINT_ADC_DATA__ ADC conversion data (resolution 12 bits) + * of internal voltage reference VrefInt (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval Analog reference voltage (unit: mV) + */ +#define __LL_ADC_CALC_VREFANALOG_VOLTAGE(__VREFINT_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +(((uint32_t)(*VREFINT_CAL_ADDR) * VREFINT_CAL_VREF) \ + / __LL_ADC_CONVERT_DATA_RESOLUTION((__VREFINT_ADC_DATA__), \ + (__ADC_RESOLUTION__), \ + LL_ADC_RESOLUTION_12B) \ +) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor calibration values + * stored in system memory for each device during production. + * @note Calculation formula: + * Temperature = ((TS_ADC_DATA - TS_CAL1) + * * (TS_CAL2_TEMP - TS_CAL1_TEMP)) + * / (TS_CAL2 - TS_CAL1) + TS_CAL1_TEMP + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * Avg_Slope = (TS_CAL2 - TS_CAL1) + * / (TS_CAL2_TEMP - TS_CAL1_TEMP) + * TS_CAL1 = equivalent TS_ADC_DATA at temperature + * TEMP_DEGC_CAL1 (calibrated in factory) + * TS_CAL2 = equivalent TS_ADC_DATA at temperature + * TEMP_DEGC_CAL2 (calibrated in factory) + * Caution: Calculation relevancy under reserve that calibration + * parameters are correct (address and data). + * To calculate temperature using temperature sensor + * datasheet typical values (generic values less, therefore + * less accurate than calibrated values), + * use helper macro @ref __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(). + * @note As calculation input, the analog reference voltage (Vref+) must be + * defined as it impacts the ADC LSB equivalent voltage. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @note On this STM32 series, calibration data of temperature sensor + * corresponds to a resolution of 12 bits, + * this is the recommended ADC resolution to convert voltage of + * temperature sensor. + * Otherwise, this macro performs the processing to scale + * ADC conversion data to 12 bits. + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal + * temperature sensor (unit: digital value). + * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature + * sensor voltage has been measured. + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval Temperature (unit: degree Celsius) + * In case or error, value LL_ADC_TEMPERATURE_CALC_ERROR is returned (inconsistent temperature value) + */ +#define __LL_ADC_CALC_TEMPERATURE(__VREFANALOG_VOLTAGE__,\ + __TEMPSENSOR_ADC_DATA__,\ + __ADC_RESOLUTION__)\ +((((int32_t)*TEMPSENSOR_CAL2_ADDR - (int32_t)*TEMPSENSOR_CAL1_ADDR) != 0) ? \ + (((( ((int32_t)((__LL_ADC_CONVERT_DATA_RESOLUTION((__TEMPSENSOR_ADC_DATA__), \ + (__ADC_RESOLUTION__), \ + LL_ADC_RESOLUTION_12B) \ + * (__VREFANALOG_VOLTAGE__)) \ + / TEMPSENSOR_CAL_VREFANALOG) \ + - (int32_t) *TEMPSENSOR_CAL1_ADDR) \ + ) * (int32_t)(TEMPSENSOR_CAL2_TEMP - TEMPSENSOR_CAL1_TEMP) \ + ) / (int32_t)((int32_t)*TEMPSENSOR_CAL2_ADDR - (int32_t)*TEMPSENSOR_CAL1_ADDR) \ + ) + TEMPSENSOR_CAL1_TEMP \ + ) \ + : \ + ((int32_t)LL_ADC_TEMPERATURE_CALC_ERROR) \ +) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor typical values + * (refer to device datasheet). + * @note Calculation formula: + * Temperature = (TS_TYP_CALx_VOLT(uV) - TS_ADC_DATA * Conversion_uV) + * / Avg_Slope + CALx_TEMP + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * (unit: digital value) + * Avg_Slope = temperature sensor slope + * (unit: uV/Degree Celsius) + * TS_TYP_CALx_VOLT = temperature sensor digital value at + * temperature CALx_TEMP (unit: mV) + * Caution: Calculation relevancy under reserve the temperature sensor + * of the current device has characteristics in line with + * datasheet typical values. + * If temperature sensor calibration values are available on + * on this device (presence of macro __LL_ADC_CALC_TEMPERATURE()), + * temperature calculation will be more accurate using + * helper macro @ref __LL_ADC_CALC_TEMPERATURE(). + * @note As calculation input, the analog reference voltage (Vref+) must be + * defined as it impacts the ADC LSB equivalent voltage. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @note ADC measurement data must correspond to a resolution of 12 bits + * (full scale digital value 4095). If not the case, the data must be + * preliminarily rescaled to an equivalent resolution of 12 bits. + * @param __TEMPSENSOR_TYP_AVGSLOPE__ Device datasheet data: Temperature sensor slope typical value + (unit: uV/DegCelsius). + * On STM32G0, refer to device datasheet parameter "Avg_Slope". + * @param __TEMPSENSOR_TYP_CALX_V__ Device datasheet data: Temperature sensor voltage typical value + (at temperature and Vref+ defined in parameters below) (unit: mV). + * On STM32G0, refer to datasheet parameter "V30" (corresponding to TS_CAL1). + * @param __TEMPSENSOR_CALX_TEMP__ Device datasheet data: Temperature at which temperature sensor voltage + (see parameter above) is corresponding (unit: degree Celsius) + * @param __VREFANALOG_VOLTAGE__ Analog voltage reference (Vref+) value (unit: mV) + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal temperature sensor (unit: digital value). + * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature sensor voltage has been measured. + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval Temperature (unit: degree Celsius) + */ +#define __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(__TEMPSENSOR_TYP_AVGSLOPE__,\ + __TEMPSENSOR_TYP_CALX_V__,\ + __TEMPSENSOR_CALX_TEMP__,\ + __VREFANALOG_VOLTAGE__,\ + __TEMPSENSOR_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +(((((int32_t)((((__TEMPSENSOR_ADC_DATA__) * (__VREFANALOG_VOLTAGE__)) \ + / __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__)) \ + * 1000UL) \ + - \ + (int32_t)(((__TEMPSENSOR_TYP_CALX_V__)) \ + * 1000UL) \ + ) \ + ) / (int32_t)(__TEMPSENSOR_TYP_AVGSLOPE__) \ + ) + (int32_t)(__TEMPSENSOR_CALX_TEMP__) \ +) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup ADC_LL_Exported_Functions ADC Exported Functions + * @{ + */ + +/** @defgroup ADC_LL_EF_DMA_Management ADC DMA management + * @{ + */ +/* Note: LL ADC functions to set DMA transfer are located into sections of */ +/* configuration of ADC instance, groups and multimode (if available): */ +/* @ref LL_ADC_REG_SetDMATransfer(), ... */ + +/** + * @brief Function to help to configure DMA transfer from ADC: retrieve the + * ADC register address from ADC instance and a list of ADC registers + * intended to be used (most commonly) with DMA transfer. + * @note These ADC registers are data registers: + * when ADC conversion data is available in ADC data registers, + * ADC generates a DMA transfer request. + * @note This macro is intended to be used with LL DMA driver, refer to + * function "LL_DMA_ConfigAddresses()". + * Example: + * LL_DMA_ConfigAddresses(DMA1, + * LL_DMA_CHANNEL_1, + * LL_ADC_DMA_GetRegAddr(ADC1, LL_ADC_DMA_REG_REGULAR_DATA), + * (uint32_t)&< array or variable >, + * LL_DMA_DIRECTION_PERIPH_TO_MEMORY); + * @note For devices with several ADC: in multimode, some devices + * use a different data register outside of ADC instance scope + * (common data register). This macro manages this register difference, + * only ADC instance has to be set as parameter. + * @rmtoll DR DATA LL_ADC_DMA_GetRegAddr + * @param ADCx ADC instance + * @param Register This parameter can be one of the following values: + * @arg @ref LL_ADC_DMA_REG_REGULAR_DATA + * @retval ADC register address + */ +__STATIC_INLINE uint32_t LL_ADC_DMA_GetRegAddr(const ADC_TypeDef *ADCx, uint32_t Register) +{ + /* Prevent unused argument(s) compilation warning */ + (void)(Register); + + /* Retrieve address of register DR */ + return (uint32_t) &(ADCx->DR); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_Common Configuration of ADC hierarchical scope: common to several + * ADC instances + * @{ + */ + +/** + * @brief Set parameter common to several ADC: Clock source and prescaler. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * This check can be done with function @ref LL_ADC_IsEnabled() for each + * ADC instance or by using helper macro helper macro + * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CCR PRESC LL_ADC_SetCommonClock + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param CommonClock This parameter can be one of the following values: + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV1 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV2 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV4 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV6 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV8 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV10 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV12 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV16 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV32 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV64 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV128 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV256 (1) + * + * (1) ADC common clock asynchronous prescaler is applied to + * each ADC instance if the corresponding ADC instance clock + * is set to clock source asynchronous. + * (refer to function @ref LL_ADC_SetClock() ). + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonClock(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t CommonClock) +{ + MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_PRESC, CommonClock); +} + +/** + * @brief Get parameter common to several ADC: Clock source and prescaler. + * @rmtoll CCR PRESC LL_ADC_GetCommonClock + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV1 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV2 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV4 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV6 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV8 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV10 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV12 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV16 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV32 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV64 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV128 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV256 (1) + * + * (1) ADC common clock asynchronous prescaler is applied to + * each ADC instance if the corresponding ADC instance clock + * is set to clock source asynchronous. + * (refer to function @ref LL_ADC_SetClock() ). + */ +__STATIC_INLINE uint32_t LL_ADC_GetCommonClock(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_PRESC)); +} + +/** + * @brief Legacy feature, useless on STM32G0 (ADC common clock low frequency + mode is automatically managed by ADC peripheral on STM32G0). + Function kept for legacy purpose. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CCR LFMEN LL_ADC_SetCommonFrequencyMode + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param CommonFrequencyMode This parameter can be one of the following values: + * @arg @ref LL_ADC_CLOCK_FREQ_MODE_HIGH + * @arg @ref LL_ADC_CLOCK_FREQ_MODE_LOW + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonFrequencyMode(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t CommonFrequencyMode) +{ + MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_LFMEN, CommonFrequencyMode); +} + +/** + * @brief Legacy feature, useless on STM32G0 (ADC common clock low frequency + mode is automatically managed by ADC peripheral on STM32G0). + Function kept for legacy purpose. + * @rmtoll CCR LFMEN LL_ADC_GetCommonFrequencyMode + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CLOCK_FREQ_MODE_HIGH + * @arg @ref LL_ADC_CLOCK_FREQ_MODE_LOW + */ +__STATIC_INLINE uint32_t LL_ADC_GetCommonFrequencyMode(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_LFMEN)); +} + +/** + * @brief Set parameter common to several ADC: measurement path to + * internal channels (VrefInt, temperature sensor, ...). + * Configure all paths (overwrite current configuration). + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * The values not selected are removed from configuration. + * @note Stabilization time of measurement path to internal channel: + * After enabling internal paths, before starting ADC conversion, + * a delay is required for internal voltage reference and + * temperature sensor stabilization time. + * Refer to device datasheet. + * Refer to literal @ref LL_ADC_DELAY_VREFINT_STAB_US. + * Refer to literals @ref LL_ADC_DELAY_TEMPSENSOR_STAB_US, + * @ref LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US. + * @note ADC internal channel sampling time constraint: + * For ADC conversion of internal channels, + * a sampling time minimum value is required. + * Refer to device datasheet. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * This check can be done with function @ref LL_ADC_IsEnabled() for each + * ADC instance or by using helper macro helper macro + * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CCR VREFEN LL_ADC_SetCommonPathInternalCh\n + * CCR TSEN LL_ADC_SetCommonPathInternalCh\n + * CCR VBATEN LL_ADC_SetCommonPathInternalCh + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param PathInternal This parameter can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @arg @ref LL_ADC_PATH_INTERNAL_VBAT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonPathInternalCh(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t PathInternal) +{ + MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_VREFEN | ADC_CCR_TSEN | ADC_CCR_VBATEN, PathInternal); +} + +/** + * @brief Set parameter common to several ADC: measurement path to + * internal channels (VrefInt, temperature sensor, ...). + * Add paths to the current configuration. + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * @note Stabilization time of measurement path to internal channel: + * After enabling internal paths, before starting ADC conversion, + * a delay is required for internal voltage reference and + * temperature sensor stabilization time. + * Refer to device datasheet. + * Refer to literal @ref LL_ADC_DELAY_VREFINT_STAB_US. + * Refer to literals @ref LL_ADC_DELAY_TEMPSENSOR_STAB_US, + * @ref LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US. + * @note ADC internal channel sampling time constraint: + * For ADC conversion of internal channels, + * a sampling time minimum value is required. + * Refer to device datasheet. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * This check can be done with function @ref LL_ADC_IsEnabled() for each + * ADC instance or by using helper macro helper macro + * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CCR VREFEN LL_ADC_SetCommonPathInternalChAdd\n + * CCR TSEN LL_ADC_SetCommonPathInternalChAdd\n + * CCR VBATEN LL_ADC_SetCommonPathInternalChAdd + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param PathInternal This parameter can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @arg @ref LL_ADC_PATH_INTERNAL_VBAT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonPathInternalChAdd(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t PathInternal) +{ + SET_BIT(ADCxy_COMMON->CCR, PathInternal); +} + +/** + * @brief Set parameter common to several ADC: measurement path to + * internal channels (VrefInt, temperature sensor, ...). + * Remove paths to the current configuration. + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * This check can be done with function @ref LL_ADC_IsEnabled() for each + * ADC instance or by using helper macro helper macro + * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CCR VREFEN LL_ADC_SetCommonPathInternalChRem\n + * CCR TSEN LL_ADC_SetCommonPathInternalChRem\n + * CCR VBATEN LL_ADC_SetCommonPathInternalChRem + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param PathInternal This parameter can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @arg @ref LL_ADC_PATH_INTERNAL_VBAT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonPathInternalChRem(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t PathInternal) +{ + CLEAR_BIT(ADCxy_COMMON->CCR, PathInternal); +} + +/** + * @brief Get parameter common to several ADC: measurement path to internal + * channels (VrefInt, temperature sensor, ...). + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * @rmtoll CCR VREFEN LL_ADC_GetCommonPathInternalCh\n + * CCR TSEN LL_ADC_GetCommonPathInternalCh\n + * CCR VBATEN LL_ADC_GetCommonPathInternalCh + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Returned value can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @arg @ref LL_ADC_PATH_INTERNAL_VBAT + */ +__STATIC_INLINE uint32_t LL_ADC_GetCommonPathInternalCh(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_VREFEN | ADC_CCR_TSEN | ADC_CCR_VBATEN)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_Instance Configuration of ADC hierarchical scope: ADC instance + * @{ + */ + +/** + * @brief Set ADC instance clock source and prescaler. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR2 CKMODE LL_ADC_SetClock + * @param ADCx ADC instance + * @param ClockSource This parameter can be one of the following values: + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV1 (2) + * @arg @ref LL_ADC_CLOCK_ASYNC (1) + * + * (1) Asynchronous clock prescaler can be configured using + * function @ref LL_ADC_SetCommonClock().\n + * (2) Caution: This parameter has some clock ratio constraints: + * This configuration must be enabled only if PCLK has a 50% + * duty clock cycle (APB prescaler configured inside the RCC + * must be bypassed and the system clock must by 50% duty + * cycle). + * Refer to reference manual. + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetClock(ADC_TypeDef *ADCx, uint32_t ClockSource) +{ + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_CKMODE, ClockSource); +} + +/** + * @brief Get ADC instance clock source and prescaler. + * @rmtoll CFGR2 CKMODE LL_ADC_GetClock + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV1 (2) + * @arg @ref LL_ADC_CLOCK_ASYNC (1) + * + * (1) Asynchronous clock prescaler can be retrieved using + * function @ref LL_ADC_GetCommonClock().\n + * (2) Caution: This parameter has some clock ratio constraints: + * This configuration must be enabled only if PCLK has a 50% + * duty clock cycle (APB prescaler configured inside the RCC + * must be bypassed and the system clock must by 50% duty + * cycle). + * Refer to reference manual. + */ +__STATIC_INLINE uint32_t LL_ADC_GetClock(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_CKMODE)); +} + +/** + * @brief Set ADC calibration factor in the mode single-ended + * or differential (for devices with differential mode available). + * @note This function is intended to set calibration parameters + * without having to perform a new calibration using + * @ref LL_ADC_StartCalibration(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be enabled, without calibration on going, without conversion + * on going on group regular. + * @rmtoll CALFACT CALFACT LL_ADC_SetCalibrationFactor + * @param ADCx ADC instance + * @param CalibrationFactor Value between Min_Data=0x00 and Max_Data=0x7F + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCalibrationFactor(ADC_TypeDef *ADCx, uint32_t CalibrationFactor) +{ + MODIFY_REG(ADCx->CALFACT, + ADC_CALFACT_CALFACT, + CalibrationFactor); +} + +/** + * @brief Get ADC calibration factor in the mode single-ended + * or differential (for devices with differential mode available). + * @note Calibration factors are set by hardware after performing + * a calibration run using function @ref LL_ADC_StartCalibration(). + * @rmtoll CALFACT CALFACT LL_ADC_GetCalibrationFactor + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00 and Max_Data=0x7F + */ +__STATIC_INLINE uint32_t LL_ADC_GetCalibrationFactor(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CALFACT, ADC_CALFACT_CALFACT)); +} + +/** + * @brief Set ADC resolution. + * Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR1 RES LL_ADC_SetResolution + * @param ADCx ADC instance + * @param Resolution This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetResolution(ADC_TypeDef *ADCx, uint32_t Resolution) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_RES, Resolution); +} + +/** + * @brief Get ADC resolution. + * Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @rmtoll CFGR1 RES LL_ADC_GetResolution + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + */ +__STATIC_INLINE uint32_t LL_ADC_GetResolution(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_RES)); +} + +/** + * @brief Set ADC conversion data alignment. + * @note Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR1 ALIGN LL_ADC_SetDataAlignment + * @param ADCx ADC instance + * @param DataAlignment This parameter can be one of the following values: + * @arg @ref LL_ADC_DATA_ALIGN_RIGHT + * @arg @ref LL_ADC_DATA_ALIGN_LEFT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetDataAlignment(ADC_TypeDef *ADCx, uint32_t DataAlignment) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_ALIGN, DataAlignment); +} + +/** + * @brief Get ADC conversion data alignment. + * @note Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @rmtoll CFGR1 ALIGN LL_ADC_GetDataAlignment + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_DATA_ALIGN_RIGHT + * @arg @ref LL_ADC_DATA_ALIGN_LEFT + */ +__STATIC_INLINE uint32_t LL_ADC_GetDataAlignment(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_ALIGN)); +} + +/** + * @brief Set ADC low power mode. + * @note Description of ADC low power modes: + * - ADC low power mode "auto wait": Dynamic low power mode, + * ADC conversions occurrences are limited to the minimum necessary + * in order to reduce power consumption. + * New ADC conversion starts only when the previous + * unitary conversion data (for ADC group regular) + * has been retrieved by user software. + * In the meantime, ADC remains idle: does not performs any + * other conversion. + * This mode allows to automatically adapt the ADC conversions + * triggers to the speed of the software that reads the data. + * Moreover, this avoids risk of overrun for low frequency + * applications. + * How to use this low power mode: + * - It is not recommended to use with interruption or DMA + * since these modes have to clear immediately the EOC flag + * (by CPU to free the IRQ pending event or by DMA). + * Auto wait will work but fort a very short time, discarding + * its intended benefit (except specific case of high load of CPU + * or DMA transfers which can justify usage of auto wait). + * - Do use with polling: 1. Start conversion, + * 2. Later on, when conversion data is needed: poll for end of + * conversion to ensure that conversion is completed and + * retrieve ADC conversion data. This will trig another + * ADC conversion start. + * - ADC low power mode "auto power-off" (feature available on + * this device if parameter LL_ADC_LP_AUTOPOWEROFF is available): + * the ADC automatically powers-off after a conversion and + * automatically wakes up when a new conversion is triggered + * (with startup time between trigger and start of sampling). + * This feature can be combined with low power mode "auto wait". + * @note With ADC low power mode "auto wait", the ADC conversion data read + * is corresponding to previous ADC conversion start, independently + * of delay during which ADC was idle. + * Therefore, the ADC conversion data may be outdated: does not + * correspond to the current voltage level on the selected + * ADC channel. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR1 WAIT LL_ADC_SetLowPowerMode\n + * CFGR1 AUTOFF LL_ADC_SetLowPowerMode + * @param ADCx ADC instance + * @param LowPowerMode This parameter can be one of the following values: + * @arg @ref LL_ADC_LP_MODE_NONE + * @arg @ref LL_ADC_LP_AUTOWAIT + * @arg @ref LL_ADC_LP_AUTOPOWEROFF + * @arg @ref LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetLowPowerMode(ADC_TypeDef *ADCx, uint32_t LowPowerMode) +{ + MODIFY_REG(ADCx->CFGR1, (ADC_CFGR1_WAIT | ADC_CFGR1_AUTOFF), LowPowerMode); +} + +/** + * @brief Get ADC low power mode: + * @note Description of ADC low power modes: + * - ADC low power mode "auto wait": Dynamic low power mode, + * ADC conversions occurrences are limited to the minimum necessary + * in order to reduce power consumption. + * New ADC conversion starts only when the previous + * unitary conversion data (for ADC group regular) + * has been retrieved by user software. + * In the meantime, ADC remains idle: does not performs any + * other conversion. + * This mode allows to automatically adapt the ADC conversions + * triggers to the speed of the software that reads the data. + * Moreover, this avoids risk of overrun for low frequency + * applications. + * How to use this low power mode: + * - It is not recommended to use with interruption or DMA + * since these modes have to clear immediately the EOC flag + * (by CPU to free the IRQ pending event or by DMA). + * Auto wait will work but fort a very short time, discarding + * its intended benefit (except specific case of high load of CPU + * or DMA transfers which can justify usage of auto wait). + * - Do use with polling: 1. Start conversion, + * 2. Later on, when conversion data is needed: poll for end of + * conversion to ensure that conversion is completed and + * retrieve ADC conversion data. This will trig another + * ADC conversion start. + * - ADC low power mode "auto power-off" (feature available on + * this device if parameter LL_ADC_LP_AUTOPOWEROFF is available): + * the ADC automatically powers-off after a conversion and + * automatically wakes up when a new conversion is triggered + * (with startup time between trigger and start of sampling). + * This feature can be combined with low power mode "auto wait". + * @note With ADC low power mode "auto wait", the ADC conversion data read + * is corresponding to previous ADC conversion start, independently + * of delay during which ADC was idle. + * Therefore, the ADC conversion data may be outdated: does not + * correspond to the current voltage level on the selected + * ADC channel. + * @rmtoll CFGR1 WAIT LL_ADC_GetLowPowerMode\n + * CFGR1 AUTOFF LL_ADC_GetLowPowerMode + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_LP_MODE_NONE + * @arg @ref LL_ADC_LP_AUTOWAIT + * @arg @ref LL_ADC_LP_AUTOPOWEROFF + * @arg @ref LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF + */ +__STATIC_INLINE uint32_t LL_ADC_GetLowPowerMode(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, (ADC_CFGR1_WAIT | ADC_CFGR1_AUTOFF))); +} + +/** + * @brief Set ADC trigger frequency mode. + * @note ADC trigger frequency mode must be set to low frequency when + * a duration is exceeded before ADC conversion start trigger event + * (between ADC enable and ADC conversion start trigger event + * or between two ADC conversion start trigger event). + * Duration value: Refer to device datasheet, parameter "tIdle". + * @note When ADC trigger frequency mode is set to low frequency, + * some rearm cycles are inserted before performing ADC conversion + * start, inducing a delay of 2 ADC clock cycles. + * @note Usage of ADC trigger frequency mode with ADC low power mode: + * - Low power mode auto wait: Only the first ADC conversion + * start trigger inserts the rearm delay. + * - Low power mode auto power-off: ADC trigger frequency mode + * is discarded. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR2 LFTRIG LL_ADC_SetTriggerFrequencyMode + * @param ADCx ADC instance + * @param TriggerFrequencyMode This parameter can be one of the following values: + * @arg @ref LL_ADC_TRIGGER_FREQ_HIGH + * @arg @ref LL_ADC_TRIGGER_FREQ_LOW + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetTriggerFrequencyMode(ADC_TypeDef *ADCx, uint32_t TriggerFrequencyMode) +{ + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_LFTRIG, TriggerFrequencyMode); +} + +/** + * @brief Get ADC trigger frequency mode. + * @rmtoll CFGR2 LFTRIG LL_ADC_GetTriggerFrequencyMode + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_TRIGGER_FREQ_HIGH + * @arg @ref LL_ADC_TRIGGER_FREQ_LOW + */ +__STATIC_INLINE uint32_t LL_ADC_GetTriggerFrequencyMode(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_LFTRIG)); +} + +/** + * @brief Set sampling time common to a group of channels. + * @note Unit: ADC clock cycles. + * @note On this STM32 series, sampling time scope is on ADC instance: + * Sampling time common to all channels. + * (on some other STM32 series, sampling time is channel wise) + * @note In case of internal channel (VrefInt, TempSensor, ...) to be + * converted: + * sampling time constraints must be respected (sampling time can be + * adjusted in function of ADC clock frequency and sampling time + * setting). + * Refer to device datasheet for timings values (parameters TS_vrefint, + * TS_temp, ...). + * @note Conversion time is the addition of sampling time and processing time. + * On this STM32 series, ADC processing time is: + * - 12.5 ADC clock cycles at ADC resolution 12 bits + * - 10.5 ADC clock cycles at ADC resolution 10 bits + * - 8.5 ADC clock cycles at ADC resolution 8 bits + * - 6.5 ADC clock cycles at ADC resolution 6 bits + * @note In case of ADC conversion of internal channel (VrefInt, + * temperature sensor, ...), a sampling time minimum value + * is required. + * Refer to device datasheet. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll SMPR SMP1 LL_ADC_SetSamplingTimeCommonChannels\n + * @rmtoll SMPR SMP2 LL_ADC_SetSamplingTimeCommonChannels + * @param ADCx ADC instance + * @param SamplingTimeY This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_1 + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_2 + * @param SamplingTime This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_1CYCLE_5 + * @arg @ref LL_ADC_SAMPLINGTIME_3CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_7CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_12CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_19CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_39CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_79CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_160CYCLES_5 + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetSamplingTimeCommonChannels(ADC_TypeDef *ADCx, uint32_t SamplingTimeY, + uint32_t SamplingTime) +{ + MODIFY_REG(ADCx->SMPR, + ADC_SMPR_SMP1 << (SamplingTimeY & ADC_SAMPLING_TIME_SMP_SHIFT_MASK), + SamplingTime << (SamplingTimeY & ADC_SAMPLING_TIME_SMP_SHIFT_MASK)); +} + +/** + * @brief Get sampling time common to a group of channels. + * @note Unit: ADC clock cycles. + * @note On this STM32 series, sampling time scope is on ADC instance: + * Sampling time common to all channels. + * (on some other STM32 series, sampling time is channel wise) + * @note Conversion time is the addition of sampling time and processing time. + * Refer to reference manual for ADC processing time of + * this STM32 series. + * @rmtoll SMPR SMP1 LL_ADC_GetSamplingTimeCommonChannels\n + * @rmtoll SMPR SMP2 LL_ADC_GetSamplingTimeCommonChannels + * @param ADCx ADC instance + * @param SamplingTimeY This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_1 + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_1CYCLE_5 + * @arg @ref LL_ADC_SAMPLINGTIME_3CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_7CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_12CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_19CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_39CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_79CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_160CYCLES_5 + */ +__STATIC_INLINE uint32_t LL_ADC_GetSamplingTimeCommonChannels(const ADC_TypeDef *ADCx, uint32_t SamplingTimeY) +{ + return (uint32_t)((READ_BIT(ADCx->SMPR, ADC_SMPR_SMP1 << (SamplingTimeY & ADC_SAMPLING_TIME_SMP_SHIFT_MASK))) + >> (SamplingTimeY & ADC_SAMPLING_TIME_SMP_SHIFT_MASK)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_Group_Regular Configuration of ADC hierarchical scope: group regular + * @{ + */ + +/** + * @brief Set ADC group regular conversion trigger source: + * internal (SW start) or from external peripheral (timer event, + * external interrupt line). + * @note On this STM32 series, setting trigger source to external trigger + * also set trigger polarity to rising edge + * (default setting for compatibility with some ADC on other + * STM32 series having this setting set by HW default value). + * In case of need to modify trigger edge, use + * function @ref LL_ADC_REG_SetTriggerEdge(). + * @note On this STM32 series, ADC trigger frequency mode must be set + * in function of frequency of ADC group regular conversion trigger. + * Refer to description of function + * @ref LL_ADC_SetTriggerFrequencyMode(). + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR1 EXTSEL LL_ADC_REG_SetTriggerSource\n + * CFGR1 EXTEN LL_ADC_REG_SetTriggerSource + * @param ADCx ADC instance + * @param TriggerSource This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_SOFTWARE + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_TRGO2 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH4 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_TRGO (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM6_TRGO (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM15_TRGO (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_EXTI_LINE11 + * + * (1) On STM32G0, parameter not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetTriggerSource(ADC_TypeDef *ADCx, uint32_t TriggerSource) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_EXTEN | ADC_CFGR1_EXTSEL, TriggerSource); +} + +/** + * @brief Get ADC group regular conversion trigger source: + * internal (SW start) or from external peripheral (timer event, + * external interrupt line). + * @note To determine whether group regular trigger source is + * internal (SW start) or external, without detail + * of which peripheral is selected as external trigger, + * (equivalent to + * "if(LL_ADC_REG_GetTriggerSource(ADC1) == LL_ADC_REG_TRIG_SOFTWARE)") + * use function @ref LL_ADC_REG_IsTriggerSourceSWStart. + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @rmtoll CFGR1 EXTSEL LL_ADC_REG_GetTriggerSource\n + * CFGR1 EXTEN LL_ADC_REG_GetTriggerSource + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_SOFTWARE + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_TRGO2 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH4 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_TRGO (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM6_TRGO (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM15_TRGO (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_EXTI_LINE11 + * + * (1) On STM32G0, parameter not available on all devices + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerSource(const ADC_TypeDef *ADCx) +{ + __IO uint32_t trigger_source = READ_BIT(ADCx->CFGR1, ADC_CFGR1_EXTSEL | ADC_CFGR1_EXTEN); + + /* Value for shift of {0; 4; 8; 12} depending on value of bitfield */ + /* corresponding to ADC_CFGR1_EXTEN {0; 1; 2; 3}. */ + uint32_t shift_exten = ((trigger_source & ADC_CFGR1_EXTEN) >> (ADC_REG_TRIG_EXTEN_BITOFFSET_POS - 2UL)); + + /* Set bitfield corresponding to ADC_CFGR1_EXTEN and ADC_CFGR1_EXTSEL */ + /* to match with triggers literals definition. */ + return ((trigger_source + & (ADC_REG_TRIG_SOURCE_MASK >> shift_exten) & ADC_CFGR1_EXTSEL) + | ((ADC_REG_TRIG_EDGE_MASK >> shift_exten) & ADC_CFGR1_EXTEN) + ); +} + +/** + * @brief Get ADC group regular conversion trigger source internal (SW start) + * or external. + * @note In case of group regular trigger source set to external trigger, + * to determine which peripheral is selected as external trigger, + * use function @ref LL_ADC_REG_GetTriggerSource(). + * @rmtoll CFGR1 EXTEN LL_ADC_REG_IsTriggerSourceSWStart + * @param ADCx ADC instance + * @retval Value "0" if trigger source external trigger + * Value "1" if trigger source SW start. + */ +__STATIC_INLINE uint32_t LL_ADC_REG_IsTriggerSourceSWStart(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CFGR1, ADC_CFGR1_EXTEN) == (LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR1_EXTEN)) ? 1UL : 0UL); +} + +/** + * @brief Set ADC group regular conversion trigger polarity. + * @note Applicable only for trigger source set to external trigger. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR1 EXTEN LL_ADC_REG_SetTriggerEdge + * @param ADCx ADC instance + * @param ExternalTriggerEdge This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_EXT_RISING + * @arg @ref LL_ADC_REG_TRIG_EXT_FALLING + * @arg @ref LL_ADC_REG_TRIG_EXT_RISINGFALLING + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetTriggerEdge(ADC_TypeDef *ADCx, uint32_t ExternalTriggerEdge) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_EXTEN, ExternalTriggerEdge); +} + +/** + * @brief Get ADC group regular conversion trigger polarity. + * @note Applicable only for trigger source set to external trigger. + * @rmtoll CFGR1 EXTEN LL_ADC_REG_GetTriggerEdge + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_EXT_RISING + * @arg @ref LL_ADC_REG_TRIG_EXT_FALLING + * @arg @ref LL_ADC_REG_TRIG_EXT_RISINGFALLING + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerEdge(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_EXTEN)); +} + +/** + * @brief Set ADC group regular sequencer configuration flexibility. + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" are + * available: + * - sequencer configured to fully configurable: + * sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function + * @ref LL_ADC_REG_SetSequencerLength(). + * - sequencer configured to not fully configurable: + * sequencer length and each rank affectation to a channel + * are fixed by channel HW number. + * Refer to description of function + * @ref LL_ADC_REG_SetSequencerChannels(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR CHSELRMOD LL_ADC_REG_SetSequencerConfigurable + * @param ADCx ADC instance + * @param Configurability This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_FIXED + * @arg @ref LL_ADC_REG_SEQ_CONFIGURABLE + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerConfigurable(ADC_TypeDef *ADCx, uint32_t Configurability) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_CHSELRMOD, Configurability); +} + +/** + * @brief Get ADC group regular sequencer configuration flexibility. + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" are + * available: + * - sequencer configured to fully configurable: + * sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function + * @ref LL_ADC_REG_SetSequencerLength(). + * - sequencer configured to not fully configurable: + * sequencer length and each rank affectation to a channel + * are fixed by channel HW number. + * Refer to description of function + * @ref LL_ADC_REG_SetSequencerChannels(). + * @rmtoll CFGR CHSELRMOD LL_ADC_REG_SetSequencerConfigurable + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_FIXED + * @arg @ref LL_ADC_REG_SEQ_CONFIGURABLE + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerConfigurable(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_CHSELRMOD)); +} + +/** + * @brief Set ADC group regular sequencer length and scan direction. + * @note Description of ADC group regular sequencer features: + * - For devices with sequencer fully configurable + * (function "LL_ADC_REG_SetSequencerRanks()" available): + * sequencer length and each rank affectation to a channel + * are configurable. + * This function performs configuration of: + * - Sequence length: Number of ranks in the scan sequence. + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from rank 1 to rank n). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerRanks()". + * - For devices with sequencer not fully configurable + * (function "LL_ADC_REG_SetSequencerChannels()" available): + * sequencer length and each rank affectation to a channel + * are defined by channel number. + * This function performs configuration of: + * - Sequence length: Number of ranks in the scan sequence is + * defined by number of channels set in the sequence, + * rank of each channel is fixed by channel HW number. + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from lowest channel number to + * highest channel number). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerChannels()". + * To set scan direction differently, refer to function + * @ref LL_ADC_REG_SetSequencerScanDirection(). + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note Sequencer disabled is equivalent to sequencer of 1 rank: + * ADC conversion on only 1 channel. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CHSELR SQ1 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ2 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ3 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ4 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ5 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ6 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ7 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ8 LL_ADC_REG_SetSequencerLength + * @param ADCx ADC instance + * @param SequencerNbRanks This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DISABLE + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerLength(ADC_TypeDef *ADCx, uint32_t SequencerNbRanks) +{ + SET_BIT(ADCx->CHSELR, SequencerNbRanks); +} + +/** + * @brief Get ADC group regular sequencer length and scan direction. + * @note Description of ADC group regular sequencer features: + * - For devices with sequencer fully configurable + * (function "LL_ADC_REG_SetSequencerRanks()" available): + * sequencer length and each rank affectation to a channel + * are configurable. + * This function retrieves: + * - Sequence length: Number of ranks in the scan sequence. + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from rank 1 to rank n). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerRanks()". + * - For devices with sequencer not fully configurable + * (function "LL_ADC_REG_SetSequencerChannels()" available): + * sequencer length and each rank affectation to a channel + * are defined by channel number. + * This function retrieves: + * - Sequence length: Number of ranks in the scan sequence is + * defined by number of channels set in the sequence, + * rank of each channel is fixed by channel HW number. + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from lowest channel number to + * highest channel number). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerChannels()". + * To set scan direction differently, refer to function + * @ref LL_ADC_REG_SetSequencerScanDirection(). + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @note Sequencer disabled is equivalent to sequencer of 1 rank: + * ADC conversion on only 1 channel. + * @rmtoll CHSELR SQ1 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ2 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ3 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ4 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ5 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ6 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ7 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ8 LL_ADC_REG_GetSequencerLength + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DISABLE + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerLength(const ADC_TypeDef *ADCx) +{ + __IO uint32_t channels_ranks = READ_BIT(ADCx->CHSELR, ADC_CHSELR_SQ_ALL); + uint32_t sequencer_length = LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS; + uint32_t rank_index; + uint32_t rank_shifted; + + /* Parse register for end of sequence identifier */ + /* Note: Value "0xF0UL" corresponds to bitfield of sequencer 2nd rank + (ADC_CHSELR_SQ2), value "4" to length of end of sequence + identifier (0xF) */ + for (rank_index = 0U; rank_index <= (28U - 4U); rank_index += 4U) + { + rank_shifted = (uint32_t)(0xF0UL << rank_index); + if ((channels_ranks & rank_shifted) == rank_shifted) + { + sequencer_length = rank_shifted; + break; + } + } + + return sequencer_length; +} + +/** + * @brief Set ADC group regular sequencer scan direction. + * @note On this STM32 series, parameter relevant only is sequencer is set + * to mode not fully configurable, + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @note On some other STM32 series, this setting is not available and + * the default scan direction is forward. + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR1 SCANDIR LL_ADC_REG_SetSequencerScanDirection + * @param ADCx ADC instance + * @param ScanDirection This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_FORWARD + * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_BACKWARD + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerScanDirection(ADC_TypeDef *ADCx, uint32_t ScanDirection) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_SCANDIR, ScanDirection); +} + +/** + * @brief Get ADC group regular sequencer scan direction. + * @note On this STM32 series, parameter relevant only is sequencer is set + * to mode not fully configurable, + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @note On some other STM32 series, this setting is not available and + * the default scan direction is forward. + * @rmtoll CFGR1 SCANDIR LL_ADC_REG_GetSequencerScanDirection + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_FORWARD + * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_BACKWARD + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerScanDirection(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_SCANDIR)); +} + +/** + * @brief Set ADC group regular sequencer discontinuous mode: + * sequence subdivided and scan conversions interrupted every selected + * number of ranks. + * @note It is not possible to enable both ADC group regular + * continuous mode and sequencer discontinuous mode. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR1 DISCEN LL_ADC_REG_SetSequencerDiscont\n + * @param ADCx ADC instance + * @param SeqDiscont This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_DISCONT_DISABLE + * @arg @ref LL_ADC_REG_SEQ_DISCONT_1RANK + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerDiscont(ADC_TypeDef *ADCx, uint32_t SeqDiscont) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_DISCEN, SeqDiscont); +} + +/** + * @brief Get ADC group regular sequencer discontinuous mode: + * sequence subdivided and scan conversions interrupted every selected + * number of ranks. + * @rmtoll CFGR1 DISCEN LL_ADC_REG_GetSequencerDiscont\n + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_DISCONT_DISABLE + * @arg @ref LL_ADC_REG_SEQ_DISCONT_1RANK + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerDiscont(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_DISCEN)); +} + +/** + * @brief Set ADC group regular sequence: channel on the selected + * scan sequence rank. + * @note This function performs configuration of: + * - Channels ordering into each rank of scan sequence: + * whatever channel can be placed into whatever rank. + * @note On this STM32 series, ADC group regular sequencer is + * fully configurable: sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function @ref LL_ADC_REG_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CHSELR SQ1 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ2 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ3 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ4 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ5 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ6 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ7 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ8 LL_ADC_REG_SetSequencerRanks + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_RANK_1 + * @arg @ref LL_ADC_REG_RANK_2 + * @arg @ref LL_ADC_REG_RANK_3 + * @arg @ref LL_ADC_REG_RANK_4 + * @arg @ref LL_ADC_REG_RANK_5 + * @arg @ref LL_ADC_REG_RANK_6 + * @arg @ref LL_ADC_REG_RANK_7 + * @arg @ref LL_ADC_REG_RANK_8 + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank, uint32_t Channel) +{ + /* Set bits with content of parameter "Channel" with bits position */ + /* in register depending on parameter "Rank". */ + /* Parameters "Rank" and "Channel" are used with masks because containing */ + /* other bits reserved for other purpose. */ + MODIFY_REG(ADCx->CHSELR, + ADC_CHSELR_SQ1 << (Rank & ADC_REG_RANK_ID_SQRX_MASK), + ((Channel & ADC_CHANNEL_ID_NUMBER_MASK_SEQ) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) + << (Rank & ADC_REG_RANK_ID_SQRX_MASK)); +} + +/** + * @brief Get ADC group regular sequence: channel on the selected + * scan sequence rank. + * @note On this STM32 series, ADC group regular sequencer is + * fully configurable: sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function @ref LL_ADC_REG_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note Usage of the returned channel number: + * - To reinject this channel into another function LL_ADC_xxx: + * the returned channel number is only partly formatted on definition + * of literals LL_ADC_CHANNEL_x. Therefore, it has to be compared + * with parts of literals LL_ADC_CHANNEL_x or using + * helper macro @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * Then the selected literal LL_ADC_CHANNEL_x can be used + * as parameter for another function. + * - To get the channel number in decimal format: + * process the returned value with the helper macro + * @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * @rmtoll CHSELR SQ1 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ2 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ3 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ4 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ5 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ6 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ7 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ8 LL_ADC_REG_GetSequencerRanks + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_RANK_1 + * @arg @ref LL_ADC_REG_RANK_2 + * @arg @ref LL_ADC_REG_RANK_3 + * @arg @ref LL_ADC_REG_RANK_4 + * @arg @ref LL_ADC_REG_RANK_5 + * @arg @ref LL_ADC_REG_RANK_6 + * @arg @ref LL_ADC_REG_RANK_7 + * @arg @ref LL_ADC_REG_RANK_8 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (2) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref LL_ADC_CHANNEL_VBAT (2) + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerRanks(const ADC_TypeDef *ADCx, uint32_t Rank) +{ + return (uint32_t)((READ_BIT(ADCx->CHSELR, + ADC_CHSELR_SQ1 << (Rank & ADC_REG_RANK_ID_SQRX_MASK)) + >> (Rank & ADC_REG_RANK_ID_SQRX_MASK) + ) << (ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) + ); +} + +/** + * @brief Set ADC group regular sequence: channel on rank corresponding to + * channel number. + * @note This function performs: + * - Channels ordering into each rank of scan sequence: + * rank of each channel is fixed by channel HW number + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Set channels selected by overwriting the current sequencer + * configuration. + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * This function can be used with setting "not fully configurable". + * Refer to description of functions @ref LL_ADC_REG_SetSequencerConfigurable() + * and @ref LL_ADC_REG_SetSequencerLength(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @note One or several values can be selected. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll CHSELR CHSEL0 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL1 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL2 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL3 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL4 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL5 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL6 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL7 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL8 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL9 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL10 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL11 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL12 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL13 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL14 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL15 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL16 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL17 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL18 LL_ADC_REG_SetSequencerChannels + * @param ADCx ADC instance + * @param Channel This parameter can be a combination of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerChannels(ADC_TypeDef *ADCx, uint32_t Channel) +{ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + WRITE_REG(ADCx->CHSELR, (Channel & ADC_CHANNEL_ID_BITFIELD_MASK)); +} + +/** + * @brief Add channel to ADC group regular sequence: channel on rank corresponding to + * channel number. + * @note This function performs: + * - Channels ordering into each rank of scan sequence: + * rank of each channel is fixed by channel HW number + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Set channels selected by adding them to the current sequencer + * configuration. + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * This function can be used with setting "not fully configurable". + * Refer to description of functions @ref LL_ADC_REG_SetSequencerConfigurable() + * and @ref LL_ADC_REG_SetSequencerLength(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @note One or several values can be selected. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll CHSELR CHSEL0 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL1 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL2 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL3 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL4 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL5 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL6 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL7 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL8 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL9 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL10 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL11 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL12 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL13 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL14 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL15 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL16 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL17 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL18 LL_ADC_REG_SetSequencerChAdd + * @param ADCx ADC instance + * @param Channel This parameter can be a combination of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerChAdd(ADC_TypeDef *ADCx, uint32_t Channel) +{ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + SET_BIT(ADCx->CHSELR, (Channel & ADC_CHANNEL_ID_BITFIELD_MASK)); +} + +/** + * @brief Remove channel to ADC group regular sequence: channel on rank corresponding to + * channel number. + * @note This function performs: + * - Channels ordering into each rank of scan sequence: + * rank of each channel is fixed by channel HW number + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Set channels selected by removing them to the current sequencer + * configuration. + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * This function can be used with setting "not fully configurable". + * Refer to description of functions @ref LL_ADC_REG_SetSequencerConfigurable() + * and @ref LL_ADC_REG_SetSequencerLength(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @note One or several values can be selected. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll CHSELR CHSEL0 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL1 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL2 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL3 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL4 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL5 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL6 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL7 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL8 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL9 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL10 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL11 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL12 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL13 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL14 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL15 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL16 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL17 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL18 LL_ADC_REG_SetSequencerChRem + * @param ADCx ADC instance + * @param Channel This parameter can be a combination of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerChRem(ADC_TypeDef *ADCx, uint32_t Channel) +{ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + CLEAR_BIT(ADCx->CHSELR, (Channel & ADC_CHANNEL_ID_BITFIELD_MASK)); +} + +/** + * @brief Get ADC group regular sequence: channel on rank corresponding to + * channel number. + * @note This function performs: + * - Channels order reading into each rank of scan sequence: + * rank of each channel is fixed by channel HW number + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * This function can be used with setting "not fully configurable". + * Refer to description of functions @ref LL_ADC_REG_SetSequencerConfigurable() + * and @ref LL_ADC_REG_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @note One or several values can be retrieved. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll CHSELR CHSEL0 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL1 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL2 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL3 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL4 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL5 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL6 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL7 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL8 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL9 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL10 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL11 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL12 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL13 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL14 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL15 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL16 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL17 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL18 LL_ADC_REG_GetSequencerChannels + * @param ADCx ADC instance + * @retval Returned value can be a combination of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerChannels(const ADC_TypeDef *ADCx) +{ + uint32_t channels_bitfield = (uint32_t)READ_BIT(ADCx->CHSELR, ADC_CHSELR_CHSEL); + + return ((((channels_bitfield & ADC_CHSELR_CHSEL0) >> ADC_CHSELR_CHSEL0_BITOFFSET_POS) * LL_ADC_CHANNEL_0) + | (((channels_bitfield & ADC_CHSELR_CHSEL1) >> ADC_CHSELR_CHSEL1_BITOFFSET_POS) * LL_ADC_CHANNEL_1) + | (((channels_bitfield & ADC_CHSELR_CHSEL2) >> ADC_CHSELR_CHSEL2_BITOFFSET_POS) * LL_ADC_CHANNEL_2) + | (((channels_bitfield & ADC_CHSELR_CHSEL3) >> ADC_CHSELR_CHSEL3_BITOFFSET_POS) * LL_ADC_CHANNEL_3) + | (((channels_bitfield & ADC_CHSELR_CHSEL4) >> ADC_CHSELR_CHSEL4_BITOFFSET_POS) * LL_ADC_CHANNEL_4) + | (((channels_bitfield & ADC_CHSELR_CHSEL5) >> ADC_CHSELR_CHSEL5_BITOFFSET_POS) * LL_ADC_CHANNEL_5) + | (((channels_bitfield & ADC_CHSELR_CHSEL6) >> ADC_CHSELR_CHSEL6_BITOFFSET_POS) * LL_ADC_CHANNEL_6) + | (((channels_bitfield & ADC_CHSELR_CHSEL7) >> ADC_CHSELR_CHSEL7_BITOFFSET_POS) * LL_ADC_CHANNEL_7) + | (((channels_bitfield & ADC_CHSELR_CHSEL8) >> ADC_CHSELR_CHSEL8_BITOFFSET_POS) * LL_ADC_CHANNEL_8) + | (((channels_bitfield & ADC_CHSELR_CHSEL9) >> ADC_CHSELR_CHSEL9_BITOFFSET_POS) * LL_ADC_CHANNEL_9) + | (((channels_bitfield & ADC_CHSELR_CHSEL10) >> ADC_CHSELR_CHSEL10_BITOFFSET_POS) * LL_ADC_CHANNEL_10) + | (((channels_bitfield & ADC_CHSELR_CHSEL11) >> ADC_CHSELR_CHSEL11_BITOFFSET_POS) * LL_ADC_CHANNEL_11) + | (((channels_bitfield & ADC_CHSELR_CHSEL12) >> ADC_CHSELR_CHSEL12_BITOFFSET_POS) * LL_ADC_CHANNEL_12) + | (((channels_bitfield & ADC_CHSELR_CHSEL13) >> ADC_CHSELR_CHSEL13_BITOFFSET_POS) * LL_ADC_CHANNEL_13) + | (((channels_bitfield & ADC_CHSELR_CHSEL14) >> ADC_CHSELR_CHSEL14_BITOFFSET_POS) * LL_ADC_CHANNEL_14) + | (((channels_bitfield & ADC_CHSELR_CHSEL15) >> ADC_CHSELR_CHSEL15_BITOFFSET_POS) * LL_ADC_CHANNEL_15) + | (((channels_bitfield & ADC_CHSELR_CHSEL16) >> ADC_CHSELR_CHSEL16_BITOFFSET_POS) * LL_ADC_CHANNEL_16) + | (((channels_bitfield & ADC_CHSELR_CHSEL17) >> ADC_CHSELR_CHSEL17_BITOFFSET_POS) * LL_ADC_CHANNEL_17) +#if defined(ADC_CCR_VBATEN) + | (((channels_bitfield & ADC_CHSELR_CHSEL18) >> ADC_CHSELR_CHSEL18_BITOFFSET_POS) * LL_ADC_CHANNEL_18) +#endif /* ADC_CCR_VBATEN */ + ); +} + +/** + * @brief Set ADC continuous conversion mode on ADC group regular. + * @note Description of ADC continuous conversion mode: + * - single mode: one conversion per trigger + * - continuous mode: after the first trigger, following + * conversions launched successively automatically. + * @note It is not possible to enable both ADC group regular + * continuous mode and sequencer discontinuous mode. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR1 CONT LL_ADC_REG_SetContinuousMode + * @param ADCx ADC instance + * @param Continuous This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_CONV_SINGLE + * @arg @ref LL_ADC_REG_CONV_CONTINUOUS + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetContinuousMode(ADC_TypeDef *ADCx, uint32_t Continuous) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_CONT, Continuous); +} + +/** + * @brief Get ADC continuous conversion mode on ADC group regular. + * @note Description of ADC continuous conversion mode: + * - single mode: one conversion per trigger + * - continuous mode: after the first trigger, following + * conversions launched successively automatically. + * @rmtoll CFGR1 CONT LL_ADC_REG_GetContinuousMode + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_CONV_SINGLE + * @arg @ref LL_ADC_REG_CONV_CONTINUOUS + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetContinuousMode(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_CONT)); +} + +/** + * @brief Set ADC group regular conversion data transfer: no transfer or + * transfer by DMA, and DMA requests mode. + * @note If transfer by DMA selected, specifies the DMA requests + * mode: + * - Limited mode (One shot mode): DMA transfer requests are stopped + * when number of DMA data transfers (number of + * ADC conversions) is reached. + * This ADC mode is intended to be used with DMA mode non-circular. + * - Unlimited mode: DMA transfer requests are unlimited, + * whatever number of DMA data transfers (number of + * ADC conversions). + * This ADC mode is intended to be used with DMA mode circular. + * @note If ADC DMA requests mode is set to unlimited and DMA is set to + * mode non-circular: + * when DMA transfers size will be reached, DMA will stop transfers of + * ADC conversions data ADC will raise an overrun error + * (overrun flag and interruption if enabled). + * @note To configure DMA source address (peripheral address), + * use function @ref LL_ADC_DMA_GetRegAddr(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR1 DMAEN LL_ADC_REG_SetDMATransfer\n + * CFGR1 DMACFG LL_ADC_REG_SetDMATransfer + * @param ADCx ADC instance + * @param DMATransfer This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_DMA_TRANSFER_NONE + * @arg @ref LL_ADC_REG_DMA_TRANSFER_LIMITED + * @arg @ref LL_ADC_REG_DMA_TRANSFER_UNLIMITED + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetDMATransfer(ADC_TypeDef *ADCx, uint32_t DMATransfer) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG, DMATransfer); +} + +/** + * @brief Get ADC group regular conversion data transfer: no transfer or + * transfer by DMA, and DMA requests mode. + * @note If transfer by DMA selected, specifies the DMA requests + * mode: + * - Limited mode (One shot mode): DMA transfer requests are stopped + * when number of DMA data transfers (number of + * ADC conversions) is reached. + * This ADC mode is intended to be used with DMA mode non-circular. + * - Unlimited mode: DMA transfer requests are unlimited, + * whatever number of DMA data transfers (number of + * ADC conversions). + * This ADC mode is intended to be used with DMA mode circular. + * @note If ADC DMA requests mode is set to unlimited and DMA is set to + * mode non-circular: + * when DMA transfers size will be reached, DMA will stop transfers of + * ADC conversions data ADC will raise an overrun error + * (overrun flag and interruption if enabled). + * @note To configure DMA source address (peripheral address), + * use function @ref LL_ADC_DMA_GetRegAddr(). + * @rmtoll CFGR1 DMAEN LL_ADC_REG_GetDMATransfer\n + * CFGR1 DMACFG LL_ADC_REG_GetDMATransfer + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_DMA_TRANSFER_NONE + * @arg @ref LL_ADC_REG_DMA_TRANSFER_LIMITED + * @arg @ref LL_ADC_REG_DMA_TRANSFER_UNLIMITED + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetDMATransfer(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG)); +} + +/** + * @brief Set ADC group regular behavior in case of overrun: + * data preserved or overwritten. + * @note Compatibility with devices without feature overrun: + * other devices without this feature have a behavior + * equivalent to data overwritten. + * The default setting of overrun is data preserved. + * Therefore, for compatibility with all devices, parameter + * overrun should be set to data overwritten. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR1 OVRMOD LL_ADC_REG_SetOverrun + * @param ADCx ADC instance + * @param Overrun This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_OVR_DATA_PRESERVED + * @arg @ref LL_ADC_REG_OVR_DATA_OVERWRITTEN + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetOverrun(ADC_TypeDef *ADCx, uint32_t Overrun) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_OVRMOD, Overrun); +} + +/** + * @brief Get ADC group regular behavior in case of overrun: + * data preserved or overwritten. + * @rmtoll CFGR1 OVRMOD LL_ADC_REG_GetOverrun + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_OVR_DATA_PRESERVED + * @arg @ref LL_ADC_REG_OVR_DATA_OVERWRITTEN + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetOverrun(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_OVRMOD)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_Channels Configuration of ADC hierarchical scope: channels + * @{ + */ + +/** + * @brief Set sampling time of the selected ADC channel + * Unit: ADC clock cycles. + * @note On this device, sampling time is on channel scope: independently + * of channel mapped on ADC group regular or injected. + * @note In case of internal channel (VrefInt, TempSensor, ...) to be + * converted: + * sampling time constraints must be respected (sampling time can be + * adjusted in function of ADC clock frequency and sampling time + * setting). + * Refer to device datasheet for timings values (parameters TS_vrefint, + * TS_temp, ...). + * @note Conversion time is the addition of sampling time and processing time. + * Refer to reference manual for ADC processing time of + * this STM32 series. + * @note In case of ADC conversion of internal channel (VrefInt, + * temperature sensor, ...), a sampling time minimum value + * is required. + * Refer to device datasheet. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll SMPR SMPSEL0 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL1 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL2 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL3 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL4 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL5 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL6 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL7 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL8 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL9 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL10 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL11 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL12 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL13 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL14 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL15 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL16 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL17 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL18 LL_ADC_SetChannelSamplingTime + * @param ADCx ADC instance + * @param Channel This parameter can be a combination of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @param SamplingTimeY This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_1 + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_2 + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t Channel, uint32_t SamplingTimeY) +{ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + MODIFY_REG(ADCx->SMPR, + (Channel << ADC_SMPR_SMPSEL0_BITOFFSET_POS), + (Channel << ADC_SMPR_SMPSEL0_BITOFFSET_POS) & (SamplingTimeY & ADC_SAMPLING_TIME_CH_MASK) + ); +} + +/** + * @brief Get sampling time of the selected ADC channel + * Unit: ADC clock cycles. + * @note On this device, sampling time is on channel scope: independently + * of channel mapped on ADC group regular or injected. + * @note Conversion time is the addition of sampling time and processing time. + * Refer to reference manual for ADC processing time of + * this STM32 series. + * @rmtoll SMPR SMPSEL0 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL1 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL2 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL3 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL4 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL5 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL6 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL7 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL8 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL9 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL10 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL11 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL12 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL13 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL14 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL15 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL16 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL17 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL18 LL_ADC_GetChannelSamplingTime + * @param ADCx ADC instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 (1) + * @arg @ref LL_ADC_CHANNEL_16 (1) + * @arg @ref LL_ADC_CHANNEL_17 (1) + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (1) On STM32G0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_1 + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_2 + */ +__STATIC_INLINE uint32_t LL_ADC_GetChannelSamplingTime(const ADC_TypeDef *ADCx, uint32_t Channel) +{ + __IO uint32_t smpr = READ_REG(ADCx->SMPR); + + /* Retrieve sampling time bit corresponding to the selected channel */ + /* and shift it to position 0. */ + uint32_t smp_channel_posbit0 = ((smpr & ADC_SAMPLING_TIME_CH_MASK) + >> ((((Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) + + ADC_SMPR_SMPSEL0_BITOFFSET_POS) + & 0x1FUL)); + + /* Select sampling time bitfield depending on sampling time bit value 0 or 1. */ + return ((~(smp_channel_posbit0) * LL_ADC_SAMPLINGTIME_COMMON_1) + | (smp_channel_posbit0 * LL_ADC_SAMPLINGTIME_COMMON_2)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_AnalogWatchdog Configuration of ADC transversal scope: analog watchdog + * @{ + */ + +/** + * @brief Set ADC analog watchdog monitored channels: + * a single channel, multiple channels or all channels, + * on ADC group regular. + * @note Once monitored channels are selected, analog watchdog + * is enabled. + * @note In case of need to define a single channel to monitor + * with analog watchdog from sequencer channel definition, + * use helper macro @ref __LL_ADC_ANALOGWD_CHANNEL_GROUP(). + * @note On this STM32 series, there are 2 kinds of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC group regular. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * - AWD flexible (instances AWD2, AWD3): + * - channels monitored: flexible on channels monitored, selection is + * channel wise, from from 1 to all channels. + * Specificity of this analog watchdog: Multiple channels can + * be selected. For example: + * (LL_ADC_AWD_CHANNEL4_REG_INJ | LL_ADC_AWD_CHANNEL5_REG_INJ | ...) + * - groups monitored: not selection possible (monitoring on both + * groups regular and injected). + * Channels selected are monitored on groups regular and injected: + * LL_ADC_AWD_CHANNELxx_REG_INJ (do not use parameters + * LL_ADC_AWD_CHANNELxx_REG and LL_ADC_AWD_CHANNELxx_INJ) + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR1 AWD1CH LL_ADC_SetAnalogWDMonitChannels\n + * CFGR1 AWD1SGL LL_ADC_SetAnalogWDMonitChannels\n + * CFGR1 AWD1EN LL_ADC_SetAnalogWDMonitChannels\n + * AWD2CR AWD2CH LL_ADC_SetAnalogWDMonitChannels\n + * AWD3CR AWD3CH LL_ADC_SetAnalogWDMonitChannels + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 + * @arg @ref LL_ADC_AWD3 + * @param AWDChannelGroup This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_DISABLE + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG + * @arg @ref LL_ADC_AWD_CH_VREFINT_REG + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG + * @arg @ref LL_ADC_AWD_CH_VBAT_REG + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDChannelGroup) +{ + /* Set bits with content of parameter "AWDChannelGroup" with bits position */ + /* in register and register position depending on parameter "AWDy". */ + /* Parameters "AWDChannelGroup" and "AWDy" are used with masks because */ + /* containing other bits reserved for other purpose. */ + __IO uint32_t *preg; + + if (AWDy == LL_ADC_AWD1) + { + preg = __ADC_PTR_REG_OFFSET(ADCx->CFGR1, 0UL); + } + else + { + preg = __ADC_PTR_REG_OFFSET(ADCx->AWD2CR, + ((AWDy & ADC_AWD_CRX_REGOFFSET_MASK)) >> (ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS + 1UL)); + } + + MODIFY_REG(*preg, + (AWDy & ADC_AWD_CR_ALL_CHANNEL_MASK), + AWDChannelGroup & AWDy); +} + +/** + * @brief Get ADC analog watchdog monitored channel. + * @note Usage of the returned channel number: + * - To reinject this channel into another function LL_ADC_xxx: + * the returned channel number is only partly formatted on definition + * of literals LL_ADC_CHANNEL_x. Therefore, it has to be compared + * with parts of literals LL_ADC_CHANNEL_x or using + * helper macro @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * Then the selected literal LL_ADC_CHANNEL_x can be used + * as parameter for another function. + * - To get the channel number in decimal format: + * process the returned value with the helper macro + * @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * Applicable only when the analog watchdog is set to monitor + * one channel. + * @note On this STM32 series, there are 2 kinds of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC group regular. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * - AWD flexible (instances AWD2, AWD3): + * - channels monitored: flexible on channels monitored, selection is + * channel wise, from from 1 to all channels. + * Specificity of this analog watchdog: Multiple channels can + * be selected. For example: + * (LL_ADC_AWD_CHANNEL4_REG_INJ | LL_ADC_AWD_CHANNEL5_REG_INJ | ...) + * - groups monitored: not selection possible (monitoring on both + * groups regular and injected). + * Channels selected are monitored on groups regular and injected: + * LL_ADC_AWD_CHANNELxx_REG_INJ (do not use parameters + * LL_ADC_AWD_CHANNELxx_REG and LL_ADC_AWD_CHANNELxx_INJ) + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 AWD1CH LL_ADC_GetAnalogWDMonitChannels\n + * CFGR1 AWD1SGL LL_ADC_GetAnalogWDMonitChannels\n + * CFGR1 AWD1EN LL_ADC_GetAnalogWDMonitChannels\n + * AWD2CR AWD2CH LL_ADC_GetAnalogWDMonitChannels\n + * AWD3CR AWD3CH LL_ADC_GetAnalogWDMonitChannels + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 (1) + * @arg @ref LL_ADC_AWD3 (1) + * + * (1) On this AWD number, monitored channel can be retrieved + * if only 1 channel is programmed (or none or all channels). + * This function cannot retrieve monitored channel if + * multiple channels are programmed simultaneously + * by bitfield. + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_AWD_DISABLE + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG + */ +__STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(const ADC_TypeDef *ADCx, uint32_t AWDy) +{ + __IO const uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->CFGR1, + ((AWDy & ADC_AWD_CRX_REGOFFSET_MASK) >> ADC_AWD_CRX_REGOFFSET_POS) + + ((AWDy & ADC_AWD_CR12_REGOFFSETGAP_MASK) + * ADC_AWD_CR12_REGOFFSETGAP_VAL)); + + uint32_t analog_wd_monit_channels = (READ_BIT(*preg, AWDy) & AWDy & ADC_AWD_CR_ALL_CHANNEL_MASK); + + /* If "analog_wd_monit_channels" == 0, then the selected AWD is disabled */ + /* (parameter value LL_ADC_AWD_DISABLE). */ + /* Else, the selected AWD is enabled and is monitoring a group of channels */ + /* or a single channel. */ + if (analog_wd_monit_channels != 0UL) + { + if (AWDy == LL_ADC_AWD1) + { + if ((analog_wd_monit_channels & ADC_CFGR1_AWD1SGL) == 0UL) + { + /* AWD monitoring a group of channels */ + analog_wd_monit_channels = ((analog_wd_monit_channels + | (ADC_AWD_CR23_CHANNEL_MASK) + ) + & (~(ADC_CFGR1_AWD1CH)) + ); + } + else + { + /* AWD monitoring a single channel */ + analog_wd_monit_channels = (analog_wd_monit_channels + | (ADC_AWD2CR_AWD2CH_0 << (analog_wd_monit_channels >> ADC_CFGR1_AWD1CH_Pos)) + ); + } + } + else + { + if ((analog_wd_monit_channels & ADC_AWD_CR23_CHANNEL_MASK) == ADC_AWD_CR23_CHANNEL_MASK) + { + /* AWD monitoring a group of channels */ + analog_wd_monit_channels = (ADC_AWD_CR23_CHANNEL_MASK + | (ADC_CFGR1_AWD1EN) + ); + } + else + { + /* AWD monitoring a single channel */ + /* AWD monitoring a group of channels */ + analog_wd_monit_channels = (analog_wd_monit_channels + | (ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) + | (__LL_ADC_CHANNEL_TO_DECIMAL_NB(analog_wd_monit_channels) << ADC_CFGR1_AWD1CH_Pos) + ); + } + } + } + + return analog_wd_monit_channels; +} + +/** + * @brief Set ADC analog watchdog thresholds value of both thresholds + * high and low. + * @note If value of only one threshold high or low must be set, + * use function @ref LL_ADC_SetAnalogWDThresholds(). + * @note In case of ADC resolution different of 12 bits, + * analog watchdog thresholds data require a specific shift. + * Use helper macro @ref __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(). + * @note On this STM32 series, there are 2 kinds of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC group regular. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * - AWD flexible (instances AWD2, AWD3): + * - channels monitored: flexible on channels monitored, selection is + * channel wise, from from 1 to all channels. + * Specificity of this analog watchdog: Multiple channels can + * be selected. For example: + * (LL_ADC_AWD_CHANNEL4_REG_INJ | LL_ADC_AWD_CHANNEL5_REG_INJ | ...) + * - groups monitored: not selection possible (monitoring on both + * groups regular and injected). + * Channels selected are monitored on groups regular and injected: + * LL_ADC_AWD_CHANNELxx_REG_INJ (do not use parameters + * LL_ADC_AWD_CHANNELxx_REG and LL_ADC_AWD_CHANNELxx_INJ) + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * @note If ADC oversampling is enabled, ADC analog watchdog thresholds are + * impacted: the comparison of analog watchdog thresholds is done on + * oversampling final computation (after ratio and shift application): + * ADC data register bitfield [15:4] (12 most significant bits). + * Examples: + * - Oversampling ratio and shift selected to have ADC conversion data + * on 12 bits (ratio 16 and shift 4, or ratio 32 and shift 5, ...): + * ADC analog watchdog thresholds must be divided by 16. + * - Oversampling ratio and shift selected to have ADC conversion data + * on 14 bits (ratio 16 and shift 2, or ratio 32 and shift 3, ...): + * ADC analog watchdog thresholds must be divided by 4. + * - Oversampling ratio and shift selected to have ADC conversion data + * on 16 bits (ratio 16 and shift none, or ratio 32 and shift 1, ...): + * ADC analog watchdog thresholds match directly to ADC data register. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll AWD1TR HT1 LL_ADC_ConfigAnalogWDThresholds\n + * AWD2TR HT2 LL_ADC_ConfigAnalogWDThresholds\n + * AWD3TR HT3 LL_ADC_ConfigAnalogWDThresholds\n + * AWD1TR LT1 LL_ADC_ConfigAnalogWDThresholds\n + * AWD2TR LT2 LL_ADC_ConfigAnalogWDThresholds\n + * AWD3TR LT3 LL_ADC_ConfigAnalogWDThresholds + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 + * @arg @ref LL_ADC_AWD3 + * @param AWDThresholdHighValue Value between Min_Data=0x000 and Max_Data=0xFFF + * @param AWDThresholdLowValue Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_ADC_ConfigAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDThresholdHighValue, + uint32_t AWDThresholdLowValue) +{ + /* Set bits with content of parameter "AWDThresholdxxxValue" with bits */ + /* position in register and register position depending on parameter */ + /* "AWDy". */ + /* Parameters "AWDy" and "AWDThresholdxxxValue" are used with masks because */ + /* containing other bits reserved for other purpose. */ + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->AWD1TR, + (((AWDy & ADC_AWD_TRX_REGOFFSET_MASK)) + >> (ADC_AWD_TRX_REGOFFSET_BITOFFSET_POS)) + + ((ADC_AWD_CR3_REGOFFSET & AWDy) + >> (ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS + 1UL)) + ); + + MODIFY_REG(*preg, + ADC_AWD1TR_HT1 | ADC_AWD1TR_LT1, + (AWDThresholdHighValue << ADC_TR1_HT1_BITOFFSET_POS) | AWDThresholdLowValue); +} + +/** + * @brief Set ADC analog watchdog threshold value of threshold + * high or low. + * @note If values of both thresholds high or low must be set, + * use function @ref LL_ADC_ConfigAnalogWDThresholds(). + * @note In case of ADC resolution different of 12 bits, + * analog watchdog thresholds data require a specific shift. + * Use helper macro @ref __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(). + * @note On this STM32 series, there are 2 kinds of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC group regular. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * - AWD flexible (instances AWD2, AWD3): + * - channels monitored: flexible on channels monitored, selection is + * channel wise, from from 1 to all channels. + * Specificity of this analog watchdog: Multiple channels can + * be selected. For example: + * (LL_ADC_AWD_CHANNEL4_REG_INJ | LL_ADC_AWD_CHANNEL5_REG_INJ | ...) + * - groups monitored: not selection possible (monitoring on both + * groups regular and injected). + * Channels selected are monitored on groups regular and injected: + * LL_ADC_AWD_CHANNELxx_REG_INJ (do not use parameters + * LL_ADC_AWD_CHANNELxx_REG and LL_ADC_AWD_CHANNELxx_INJ) + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * @note If ADC oversampling is enabled, ADC analog watchdog thresholds are + * impacted: the comparison of analog watchdog thresholds is done on + * oversampling final computation (after ratio and shift application): + * ADC data register bitfield [15:4] (12 most significant bits). + * Examples: + * - Oversampling ratio and shift selected to have ADC conversion data + * on 12 bits (ratio 16 and shift 4, or ratio 32 and shift 5, ...): + * ADC analog watchdog thresholds must be divided by 16. + * - Oversampling ratio and shift selected to have ADC conversion data + * on 14 bits (ratio 16 and shift 2, or ratio 32 and shift 3, ...): + * ADC analog watchdog thresholds must be divided by 4. + * - Oversampling ratio and shift selected to have ADC conversion data + * on 16 bits (ratio 16 and shift none, or ratio 32 and shift 1, ...): + * ADC analog watchdog thresholds match directly to ADC data register. + * @note On this STM32 series, setting of this feature is not conditioned to + * ADC state: + * ADC can be disabled, enabled with or without conversion on going + * on ADC group regular. + * @rmtoll AWD1TR HT1 LL_ADC_SetAnalogWDThresholds\n + * AWD2TR HT2 LL_ADC_SetAnalogWDThresholds\n + * AWD3TR HT3 LL_ADC_SetAnalogWDThresholds\n + * AWD1TR LT1 LL_ADC_SetAnalogWDThresholds\n + * AWD2TR LT2 LL_ADC_SetAnalogWDThresholds\n + * AWD3TR LT3 LL_ADC_SetAnalogWDThresholds + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 + * @arg @ref LL_ADC_AWD3 + * @param AWDThresholdsHighLow This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH + * @arg @ref LL_ADC_AWD_THRESHOLD_LOW + * @param AWDThresholdValue Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDThresholdsHighLow, + uint32_t AWDThresholdValue) +{ + /* Set bits with content of parameter "AWDThresholdValue" with bits */ + /* position in register and register position depending on parameters */ + /* "AWDThresholdsHighLow" and "AWDy". */ + /* Parameters "AWDy" and "AWDThresholdValue" are used with masks because */ + /* containing other bits reserved for other purpose. */ + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->AWD1TR, + (((AWDy & ADC_AWD_TRX_REGOFFSET_MASK)) + >> (ADC_AWD_TRX_REGOFFSET_BITOFFSET_POS)) + + ((ADC_AWD_CR3_REGOFFSET & AWDy) + >> (ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS + 1UL))); + + MODIFY_REG(*preg, + AWDThresholdsHighLow, + AWDThresholdValue << ((AWDThresholdsHighLow & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4)); +} + +/** + * @brief Get ADC analog watchdog threshold value of threshold high, + * threshold low or raw data with ADC thresholds high and low + * concatenated. + * @note If raw data with ADC thresholds high and low is retrieved, + * the data of each threshold high or low can be isolated + * using helper macro: + * @ref __LL_ADC_ANALOGWD_THRESHOLDS_HIGH_LOW(). + * @note In case of ADC resolution different of 12 bits, + * analog watchdog thresholds data require a specific shift. + * Use helper macro @ref __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION(). + * @rmtoll AWD1TR HT1 LL_ADC_GetAnalogWDThresholds\n + * AWD2TR HT2 LL_ADC_GetAnalogWDThresholds\n + * AWD3TR HT3 LL_ADC_GetAnalogWDThresholds\n + * AWD1TR LT1 LL_ADC_GetAnalogWDThresholds\n + * AWD2TR LT2 LL_ADC_GetAnalogWDThresholds\n + * AWD3TR LT3 LL_ADC_GetAnalogWDThresholds + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 + * @arg @ref LL_ADC_AWD3 + * @param AWDThresholdsHighLow This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH + * @arg @ref LL_ADC_AWD_THRESHOLD_LOW + * @arg @ref LL_ADC_AWD_THRESHOLDS_HIGH_LOW + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_ADC_GetAnalogWDThresholds(const ADC_TypeDef *ADCx, + uint32_t AWDy, uint32_t AWDThresholdsHighLow) +{ + /* Set bits with content of parameter "AWDThresholdValue" with bits */ + /* position in register and register position depending on parameters */ + /* "AWDThresholdsHighLow" and "AWDy". */ + /* Parameters "AWDy" and "AWDThresholdValue" are used with masks because */ + /* containing other bits reserved for other purpose. */ + const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->AWD1TR, + (((AWDy & ADC_AWD_TRX_REGOFFSET_MASK)) + >> (ADC_AWD_TRX_REGOFFSET_BITOFFSET_POS)) + + ((ADC_AWD_CR3_REGOFFSET & AWDy) + >> (ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS + 1UL))); + + return (uint32_t)(READ_BIT(*preg, + (AWDThresholdsHighLow | ADC_AWD1TR_LT1)) + >> (((AWDThresholdsHighLow & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4) + & ~(AWDThresholdsHighLow & ADC_AWD1TR_LT1))); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_oversampling Configuration of ADC transversal scope: oversampling + * @{ + */ + +/** + * @brief Set ADC oversampling scope. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR2 OVSE LL_ADC_SetOverSamplingScope + * @param ADCx ADC instance + * @param OvsScope This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_DISABLE + * @arg @ref LL_ADC_OVS_GRP_REGULAR_CONTINUED + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetOverSamplingScope(ADC_TypeDef *ADCx, uint32_t OvsScope) +{ + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_OVSE, OvsScope); +} + +/** + * @brief Get ADC oversampling scope. + * @rmtoll CFGR2 OVSE LL_ADC_GetOverSamplingScope + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_OVS_DISABLE + * @arg @ref LL_ADC_OVS_GRP_REGULAR_CONTINUED + */ +__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingScope(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_OVSE)); +} + +/** + * @brief Set ADC oversampling discontinuous mode (triggered mode) + * on the selected ADC group. + * @note Number of oversampled conversions are done either in: + * - continuous mode (all conversions of oversampling ratio + * are done from 1 trigger) + * - discontinuous mode (each conversion of oversampling ratio + * needs a trigger) + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR2 TOVS LL_ADC_SetOverSamplingDiscont + * @param ADCx ADC instance + * @param OverSamplingDiscont This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_REG_CONT + * @arg @ref LL_ADC_OVS_REG_DISCONT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetOverSamplingDiscont(ADC_TypeDef *ADCx, uint32_t OverSamplingDiscont) +{ + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_TOVS, OverSamplingDiscont); +} + +/** + * @brief Get ADC oversampling discontinuous mode (triggered mode) + * on the selected ADC group. + * @note Number of oversampled conversions are done either in: + * - continuous mode (all conversions of oversampling ratio + * are done from 1 trigger) + * - discontinuous mode (each conversion of oversampling ratio + * needs a trigger) + * @rmtoll CFGR2 TOVS LL_ADC_GetOverSamplingDiscont + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_OVS_REG_CONT + * @arg @ref LL_ADC_OVS_REG_DISCONT + */ +__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingDiscont(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_TOVS)); +} + +/** + * @brief Set ADC oversampling + * @note This function set the 2 items of oversampling configuration: + * - ratio + * - shift + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR2 OVSS LL_ADC_ConfigOverSamplingRatioShift\n + * CFGR2 OVSR LL_ADC_ConfigOverSamplingRatioShift + * @param ADCx ADC instance + * @param Ratio This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_RATIO_2 + * @arg @ref LL_ADC_OVS_RATIO_4 + * @arg @ref LL_ADC_OVS_RATIO_8 + * @arg @ref LL_ADC_OVS_RATIO_16 + * @arg @ref LL_ADC_OVS_RATIO_32 + * @arg @ref LL_ADC_OVS_RATIO_64 + * @arg @ref LL_ADC_OVS_RATIO_128 + * @arg @ref LL_ADC_OVS_RATIO_256 + * @param Shift This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_SHIFT_NONE + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_1 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_2 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_3 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_4 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_5 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_6 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_7 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_8 + * @retval None + */ +__STATIC_INLINE void LL_ADC_ConfigOverSamplingRatioShift(ADC_TypeDef *ADCx, uint32_t Ratio, uint32_t Shift) +{ + MODIFY_REG(ADCx->CFGR2, (ADC_CFGR2_OVSS | ADC_CFGR2_OVSR), (Shift | Ratio)); +} + +/** + * @brief Get ADC oversampling ratio + * @rmtoll CFGR2 OVSR LL_ADC_GetOverSamplingRatio + * @param ADCx ADC instance + * @retval Ratio This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_RATIO_2 + * @arg @ref LL_ADC_OVS_RATIO_4 + * @arg @ref LL_ADC_OVS_RATIO_8 + * @arg @ref LL_ADC_OVS_RATIO_16 + * @arg @ref LL_ADC_OVS_RATIO_32 + * @arg @ref LL_ADC_OVS_RATIO_64 + * @arg @ref LL_ADC_OVS_RATIO_128 + * @arg @ref LL_ADC_OVS_RATIO_256 + */ +__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingRatio(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_OVSR)); +} + +/** + * @brief Get ADC oversampling shift + * @rmtoll CFGR2 OVSS LL_ADC_GetOverSamplingShift + * @param ADCx ADC instance + * @retval Shift This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_SHIFT_NONE + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_1 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_2 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_3 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_4 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_5 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_6 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_7 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_8 + */ +__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingShift(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_OVSS)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Operation_ADC_Instance Operation on ADC hierarchical scope: ADC instance + * @{ + */ + +/** + * @brief Enable ADC instance internal voltage regulator. + * @note On this STM32 series, there are three possibilities to enable + * the voltage regulator: + * - by enabling it manually + * using function @ref LL_ADC_EnableInternalRegulator(). + * - by launching a calibration + * using function @ref LL_ADC_StartCalibration(). + * - by enabling the ADC + * using function @ref LL_ADC_Enable(). + * @note On this STM32 series, after ADC internal voltage regulator enable, + * a delay for ADC internal voltage regulator stabilization + * is required before performing a ADC calibration or ADC enable. + * Refer to device datasheet, parameter "tADCVREG_STUP". + * Refer to literal @ref LL_ADC_DELAY_INTERNAL_REGUL_STAB_US. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled. + * @rmtoll CR ADVREGEN LL_ADC_EnableInternalRegulator + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableInternalRegulator(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADVREGEN); +} + +/** + * @brief Disable ADC internal voltage regulator. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled. + * @rmtoll CR ADVREGEN LL_ADC_DisableInternalRegulator + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableInternalRegulator(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->CR, (ADC_CR_ADVREGEN | ADC_CR_BITS_PROPERTY_RS)); +} + +/** + * @brief Get the selected ADC instance internal voltage regulator state. + * @rmtoll CR ADVREGEN LL_ADC_IsInternalRegulatorEnabled + * @param ADCx ADC instance + * @retval 0: internal regulator is disabled, 1: internal regulator is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsInternalRegulatorEnabled(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADVREGEN) == (ADC_CR_ADVREGEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable the selected ADC instance. + * @note On this STM32 series, after ADC enable, a delay for + * ADC internal analog stabilization is required before performing a + * ADC conversion start. + * Refer to device datasheet, parameter tSTAB. + * @note On this STM32 series, flag LL_ADC_FLAG_ADRDY is raised when the ADC + * is enabled and when conversion clock is active. + * (not only core clock: this ADC has a dual clock domain) + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled and ADC internal voltage regulator enabled. + * @rmtoll CR ADEN LL_ADC_Enable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_Enable(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADEN); +} + +/** + * @brief Disable the selected ADC instance. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be not disabled. Must be enabled without conversion on going + * on group regular. + * @rmtoll CR ADDIS LL_ADC_Disable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_Disable(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADDIS); +} + +/** + * @brief Get the selected ADC instance enable state. + * @note On this STM32 series, flag LL_ADC_FLAG_ADRDY is raised when the ADC + * is enabled and when conversion clock is active. + * (not only core clock: this ADC has a dual clock domain) + * @rmtoll CR ADEN LL_ADC_IsEnabled + * @param ADCx ADC instance + * @retval 0: ADC is disabled, 1: ADC is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabled(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADEN) == (ADC_CR_ADEN)) ? 1UL : 0UL); +} + +/** + * @brief Get the selected ADC instance disable state. + * @rmtoll CR ADDIS LL_ADC_IsDisableOngoing + * @param ADCx ADC instance + * @retval 0: no ADC disable command on going. + */ +__STATIC_INLINE uint32_t LL_ADC_IsDisableOngoing(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADDIS) == (ADC_CR_ADDIS)) ? 1UL : 0UL); +} + +/** + * @brief Start ADC calibration in the mode single-ended + * or differential (for devices with differential mode available). + * @note On this STM32 series, a minimum number of ADC clock cycles + * are required between ADC end of calibration and ADC enable. + * Refer to literal @ref LL_ADC_DELAY_CALIB_ENABLE_ADC_CYCLES. + * @note In case of usage of ADC with DMA transfer: + * On this STM32 series, ADC DMA transfer request should be disabled + * during calibration: + * Calibration factor is available in data register + * and also transferred by DMA. + * To not insert ADC calibration factor among ADC conversion data + * in array variable, DMA transfer must be disabled during + * calibration. + * (DMA transfer setting backup and disable before calibration, + * DMA transfer setting restore after calibration. + * Refer to functions @ref LL_ADC_REG_GetDMATransfer(), + * @ref LL_ADC_REG_SetDMATransfer() ). + * @note In case of usage of feature auto power-off: + * This mode must be disabled during calibration + * Refer to function @ref LL_ADC_SetLowPowerMode(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled. + * @rmtoll CR ADCAL LL_ADC_StartCalibration + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_StartCalibration(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADCAL); +} + +/** + * @brief Get ADC calibration state. + * @rmtoll CR ADCAL LL_ADC_IsCalibrationOnGoing + * @param ADCx ADC instance + * @retval 0: calibration complete, 1: calibration in progress. + */ +__STATIC_INLINE uint32_t LL_ADC_IsCalibrationOnGoing(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADCAL) == (ADC_CR_ADCAL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Operation_ADC_Group_Regular Operation on ADC hierarchical scope: group regular + * @{ + */ + +/** + * @brief Start ADC group regular conversion. + * @note On this STM32 series, this function is relevant for both + * internal trigger (SW start) and external trigger: + * - If ADC trigger has been set to software start, ADC conversion + * starts immediately. + * - If ADC trigger has been set to external trigger, ADC conversion + * will start at next trigger event (on the selected trigger edge) + * following the ADC start conversion command. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be enabled without conversion on going on group regular, + * without conversion stop command on going on group regular, + * without ADC disable command on going. + * @rmtoll CR ADSTART LL_ADC_REG_StartConversion + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_StartConversion(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADSTART); +} + +/** + * @brief Stop ADC group regular conversion. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be enabled (potentially with conversion on going on group regular), + * without ADC disable command on going. + * @rmtoll CR ADSTP LL_ADC_REG_StopConversion + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_StopConversion(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADSTP); +} + +/** + * @brief Get ADC group regular conversion state. + * @rmtoll CR ADSTART LL_ADC_REG_IsConversionOngoing + * @param ADCx ADC instance + * @retval 0: no conversion is on going on ADC group regular. + */ +__STATIC_INLINE uint32_t LL_ADC_REG_IsConversionOngoing(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADSTART) == (ADC_CR_ADSTART)) ? 1UL : 0UL); +} + +/** + * @brief Get ADC group regular command of conversion stop state + * @rmtoll CR ADSTP LL_ADC_REG_IsStopConversionOngoing + * @param ADCx ADC instance + * @retval 0: no command of conversion stop is on going on ADC group regular. + */ +__STATIC_INLINE uint32_t LL_ADC_REG_IsStopConversionOngoing(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADSTP) == (ADC_CR_ADSTP)) ? 1UL : 0UL); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * all ADC configurations: all ADC resolutions and + * all oversampling increased data width (for devices + * with feature oversampling). + * @rmtoll DR DATA LL_ADC_REG_ReadConversionData32 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_ADC_REG_ReadConversionData32(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 12 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR DATA LL_ADC_REG_ReadConversionData12 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData12(const ADC_TypeDef *ADCx) +{ + return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA) & 0x00000FFFUL); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 10 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR DATA LL_ADC_REG_ReadConversionData10 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x000 and Max_Data=0x3FF + */ +__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData10(const ADC_TypeDef *ADCx) +{ + return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA) & 0x000003FFUL); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 8 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR DATA LL_ADC_REG_ReadConversionData8 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData8(const ADC_TypeDef *ADCx) +{ + return (uint8_t)(READ_BIT(ADCx->DR, ADC_DR_DATA) & 0x000000FFUL); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 6 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR DATA LL_ADC_REG_ReadConversionData6 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00 and Max_Data=0x3F + */ +__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData6(const ADC_TypeDef *ADCx) +{ + return (uint8_t)(READ_BIT(ADCx->DR, ADC_DR_DATA) & 0x0000003FUL); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_FLAG_Management ADC flag management + * @{ + */ + +/** + * @brief Get flag ADC ready. + * @note On this STM32 series, flag LL_ADC_FLAG_ADRDY is raised when the ADC + * is enabled and when conversion clock is active. + * (not only core clock: this ADC has a dual clock domain) + * @rmtoll ISR ADRDY LL_ADC_IsActiveFlag_ADRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_ADRDY(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_ADRDY) == (LL_ADC_FLAG_ADRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC channel configuration ready. + * @note On this STM32 series, after modifying sequencer + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, performing some actions (configuration update, + * ADC conversion start, ... ) will be ignored. + * Functions requiring wait for CCRDY flag are: + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks() + * @ref LL_ADC_REG_SetSequencerChannels() + * @ref LL_ADC_REG_SetSequencerChAdd() + * @ref LL_ADC_REG_SetSequencerChRem() + * @ref LL_ADC_REG_SetSequencerScanDirection() + * @ref LL_ADC_REG_SetSequencerConfigurable() + * @note Duration of ADC channel configuration ready: CCRDY handshake + * requires 1APB + 2 ADC + 3 APB cycles after the channel configuration + * has been changed. + * @rmtoll ISR CCRDY LL_ADC_IsActiveFlag_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_CCRDY(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_CCRDY) == (LL_ADC_FLAG_CCRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group regular end of unitary conversion. + * @rmtoll ISR EOC LL_ADC_IsActiveFlag_EOC + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOC(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, ADC_ISR_EOC) == (ADC_ISR_EOC)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group regular end of sequence conversions. + * @rmtoll ISR EOS LL_ADC_IsActiveFlag_EOS + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOS(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_EOS) == (LL_ADC_FLAG_EOS)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group regular overrun. + * @rmtoll ISR OVR LL_ADC_IsActiveFlag_OVR + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_OVR(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_OVR) == (LL_ADC_FLAG_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group regular end of sampling phase. + * @rmtoll ISR EOSMP LL_ADC_IsActiveFlag_EOSMP + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOSMP(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_EOSMP) == (LL_ADC_FLAG_EOSMP)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC analog watchdog 1 flag + * @rmtoll ISR AWD1 LL_ADC_IsActiveFlag_AWD1 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD1(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_AWD1) == (LL_ADC_FLAG_AWD1)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC analog watchdog 2. + * @rmtoll ISR AWD2 LL_ADC_IsActiveFlag_AWD2 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD2(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_AWD2) == (LL_ADC_FLAG_AWD2)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC analog watchdog 3. + * @rmtoll ISR AWD3 LL_ADC_IsActiveFlag_AWD3 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD3(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_AWD3) == (LL_ADC_FLAG_AWD3)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC end of calibration. + * @rmtoll ISR EOCAL LL_ADC_IsActiveFlag_EOCAL + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOCAL(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_EOCAL) == (LL_ADC_FLAG_EOCAL)) ? 1UL : 0UL); +} + +/** + * @brief Clear flag ADC ready. + * @note On this STM32 series, flag LL_ADC_FLAG_ADRDY is raised when the ADC + * is enabled and when conversion clock is active. + * (not only core clock: this ADC has a dual clock domain) + * @rmtoll ISR ADRDY LL_ADC_ClearFlag_ADRDY + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_ADRDY(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_ADRDY); +} + +/** + * @brief Clear flag ADC channel configuration ready. + * @rmtoll ISR CCRDY LL_ADC_ClearFlag_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE void LL_ADC_ClearFlag_CCRDY(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_CCRDY); +} + +/** + * @brief Clear flag ADC group regular end of unitary conversion. + * @rmtoll ISR EOC LL_ADC_ClearFlag_EOC + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOC(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOC); +} + +/** + * @brief Clear flag ADC group regular end of sequence conversions. + * @rmtoll ISR EOS LL_ADC_ClearFlag_EOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOS(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOS); +} + +/** + * @brief Clear flag ADC group regular overrun. + * @rmtoll ISR OVR LL_ADC_ClearFlag_OVR + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_OVR(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_OVR); +} + +/** + * @brief Clear flag ADC group regular end of sampling phase. + * @rmtoll ISR EOSMP LL_ADC_ClearFlag_EOSMP + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOSMP(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOSMP); +} + +/** + * @brief Clear flag ADC analog watchdog 1. + * @rmtoll ISR AWD1 LL_ADC_ClearFlag_AWD1 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_AWD1(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_AWD1); +} + +/** + * @brief Clear flag ADC analog watchdog 2. + * @rmtoll ISR AWD2 LL_ADC_ClearFlag_AWD2 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_AWD2(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_AWD2); +} + +/** + * @brief Clear flag ADC analog watchdog 3. + * @rmtoll ISR AWD3 LL_ADC_ClearFlag_AWD3 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_AWD3(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_AWD3); +} + +/** + * @brief Clear flag ADC end of calibration. + * @rmtoll ISR EOCAL LL_ADC_ClearFlag_EOCAL + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOCAL(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOCAL); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_IT_Management ADC IT management + * @{ + */ + +/** + * @brief Enable ADC ready. + * @rmtoll IER ADRDYIE LL_ADC_EnableIT_ADRDY + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_ADRDY(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_ADRDY); +} + +/** + * @brief Enable interruption ADC channel configuration ready. + * @rmtoll IER CCRDYIE LL_ADC_EnableIT_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE void LL_ADC_EnableIT_CCRDY(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_FLAG_CCRDY); +} + +/** + * @brief Enable interruption ADC group regular end of unitary conversion. + * @rmtoll IER EOCIE LL_ADC_EnableIT_EOC + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOC(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_EOC); +} + +/** + * @brief Enable interruption ADC group regular end of sequence conversions. + * @rmtoll IER EOSIE LL_ADC_EnableIT_EOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOS(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_EOS); +} + +/** + * @brief Enable ADC group regular interruption overrun. + * @rmtoll IER OVRIE LL_ADC_EnableIT_OVR + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_OVR(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_OVR); +} + +/** + * @brief Enable interruption ADC group regular end of sampling. + * @rmtoll IER EOSMPIE LL_ADC_EnableIT_EOSMP + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOSMP(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_EOSMP); +} + +/** + * @brief Enable interruption ADC analog watchdog 1. + * @rmtoll IER AWD1IE LL_ADC_EnableIT_AWD1 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_AWD1(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_AWD1); +} + +/** + * @brief Enable interruption ADC analog watchdog 2. + * @rmtoll IER AWD2IE LL_ADC_EnableIT_AWD2 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_AWD2(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_AWD2); +} + +/** + * @brief Enable interruption ADC analog watchdog 3. + * @rmtoll IER AWD3IE LL_ADC_EnableIT_AWD3 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_AWD3(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_AWD3); +} + +/** + * @brief Enable interruption ADC end of calibration. + * @rmtoll IER EOCALIE LL_ADC_EnableIT_EOCAL + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOCAL(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_EOCAL); +} + +/** + * @brief Disable interruption ADC ready. + * @rmtoll IER ADRDYIE LL_ADC_DisableIT_ADRDY + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_ADRDY(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_ADRDY); +} + +/** + * @brief Disable interruption ADC channel configuration ready. + * @rmtoll IER CCRDYIE LL_ADC_DisableIT_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE void LL_ADC_DisableIT_CCRDY(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_FLAG_CCRDY); +} + +/** + * @brief Disable interruption ADC group regular end of unitary conversion. + * @rmtoll IER EOCIE LL_ADC_DisableIT_EOC + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOC(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOC); +} + +/** + * @brief Disable interruption ADC group regular end of sequence conversions. + * @rmtoll IER EOSIE LL_ADC_DisableIT_EOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOS(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOS); +} + +/** + * @brief Disable interruption ADC group regular overrun. + * @rmtoll IER OVRIE LL_ADC_DisableIT_OVR + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_OVR(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_OVR); +} + +/** + * @brief Disable interruption ADC group regular end of sampling. + * @rmtoll IER EOSMPIE LL_ADC_DisableIT_EOSMP + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOSMP(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOSMP); +} + +/** + * @brief Disable interruption ADC analog watchdog 1. + * @rmtoll IER AWD1IE LL_ADC_DisableIT_AWD1 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_AWD1(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_AWD1); +} + +/** + * @brief Disable interruption ADC analog watchdog 2. + * @rmtoll IER AWD2IE LL_ADC_DisableIT_AWD2 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_AWD2(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_AWD2); +} + +/** + * @brief Disable interruption ADC analog watchdog 3. + * @rmtoll IER AWD3IE LL_ADC_DisableIT_AWD3 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_AWD3(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_AWD3); +} + +/** + * @brief Disable interruption ADC end of calibration. + * @rmtoll IER EOCALIE LL_ADC_DisableIT_EOCAL + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOCAL(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOCAL); +} + +/** + * @brief Get state of interruption ADC ready + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER ADRDYIE LL_ADC_IsEnabledIT_ADRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_ADRDY(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_ADRDY) == (LL_ADC_IT_ADRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC channel configuration ready. + * @rmtoll IER CCRDYIE LL_ADC_IsEnabledIT_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_CCRDY(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_FLAG_CCRDY) == (LL_ADC_FLAG_CCRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group regular end of unitary conversion + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER EOCIE LL_ADC_IsEnabledIT_EOC + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOC(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOC) == (LL_ADC_IT_EOC)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group regular end of sequence conversions + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER EOSIE LL_ADC_IsEnabledIT_EOS + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOS(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOS) == (LL_ADC_IT_EOS)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group regular overrun + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER OVRIE LL_ADC_IsEnabledIT_OVR + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_OVR(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_OVR) == (LL_ADC_IT_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group regular end of sampling + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER EOSMPIE LL_ADC_IsEnabledIT_EOSMP + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOSMP(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOSMP) == (LL_ADC_IT_EOSMP)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC analog watchdog 1 + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER AWD1IE LL_ADC_IsEnabledIT_AWD1 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD1(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_AWD1) == (LL_ADC_IT_AWD1)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption Get ADC analog watchdog 2 + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER AWD2IE LL_ADC_IsEnabledIT_AWD2 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD2(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_AWD2) == (LL_ADC_IT_AWD2)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption Get ADC analog watchdog 3 + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER AWD3IE LL_ADC_IsEnabledIT_AWD3 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD3(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_AWD3) == (LL_ADC_IT_AWD3)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC end of calibration + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER EOCALIE LL_ADC_IsEnabledIT_EOCAL + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOCAL(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOCAL) == (LL_ADC_IT_EOCAL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup ADC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +/* Initialization of some features of ADC common parameters and multimode */ +ErrorStatus LL_ADC_CommonDeInit(ADC_Common_TypeDef *ADCxy_COMMON); +ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, const LL_ADC_CommonInitTypeDef *pADC_CommonInitStruct); +void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *pADC_CommonInitStruct); + +/* De-initialization of ADC instance */ +ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx); + +/* Initialization of some features of ADC instance */ +ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, const LL_ADC_InitTypeDef *pADC_InitStruct); +void LL_ADC_StructInit(LL_ADC_InitTypeDef *pADC_InitStruct); + +/* Initialization of some features of ADC instance and ADC group regular */ +ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, const LL_ADC_REG_InitTypeDef *pADC_RegInitStruct); +void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *pADC_RegInitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ADC1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_ADC_H */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_bus.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_bus.h new file mode 100644 index 0000000..4309003 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_bus.h @@ -0,0 +1,1306 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_bus.h + * @author MCD Application Team + * @brief Header file of BUS LL module. + + @verbatim + ##### RCC Limitations ##### + ============================================================================== + [..] + A delay between an RCC peripheral clock enable and the effective peripheral + enabling should be taken into account in order to manage the peripheral read/write + from/to registers. + (+) This delay depends on the peripheral mapping. + (++) AHB & APB peripherals, 1 dummy read is necessary + + [..] + Workarounds: + (#) For AHB & APB peripherals, a dummy read to the peripheral register has been + inserted in each LL_{BUS}_GRP{x}_EnableClock() function. + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_BUS_H +#define STM32G0xx_LL_BUS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup BUS_LL BUS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants + * @{ + */ + +/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH + * @{ + */ +#define LL_AHB1_GRP1_PERIPH_ALL 0xFFFFFFFFU +#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHBENR_DMA1EN +#if defined(DMA2) +#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHBENR_DMA2EN +#endif /* DMA2 */ +#define LL_AHB1_GRP1_PERIPH_FLASH RCC_AHBENR_FLASHEN +#define LL_AHB1_GRP1_PERIPH_SRAM RCC_AHBSMENR_SRAMSMEN +#if defined(CRC) +#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHBENR_CRCEN +#endif /* CRC */ +#if defined(AES) +#define LL_AHB1_GRP1_PERIPH_CRYP RCC_AHBENR_AESEN +#endif /* AES */ +#if defined(RNG) +#define LL_AHB1_GRP1_PERIPH_RNG RCC_AHBENR_RNGEN +#endif /* RNG */ +/** + * @} + */ + + +/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH + * @{ + */ +#define LL_APB1_GRP1_PERIPH_ALL 0xFFFFFFFFU +#if defined(TIM2) +#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APBENR1_TIM2EN +#endif /* TIM2 */ +#if defined(TIM3) +#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APBENR1_TIM3EN +#endif /* TIM3 */ +#if defined(TIM4) +#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APBENR1_TIM4EN +#endif /* TIM4 */ +#if defined(TIM6) +#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APBENR1_TIM6EN +#endif /* TIM6 */ +#if defined(TIM7) +#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APBENR1_TIM7EN +#endif /* TIM7 */ +#if defined(LPUART2) +#define LL_APB1_GRP1_PERIPH_LPUART2 RCC_APBENR1_LPUART2EN +#endif /* LPUART2 */ +#if defined(USART5) +#define LL_APB1_GRP1_PERIPH_USART5 RCC_APBENR1_USART5EN +#endif /* USART5 */ +#if defined(USART6) +#define LL_APB1_GRP1_PERIPH_USART6 RCC_APBENR1_USART6EN +#endif /* USART6 */ +#define LL_APB1_GRP1_PERIPH_RTC RCC_APBENR1_RTCAPBEN +#define LL_APB1_GRP1_PERIPH_WWDG RCC_APBENR1_WWDGEN +#if defined(FDCAN1) || defined(FDCAN2) +#define LL_APB1_GRP1_PERIPH_FDCAN RCC_APBENR1_FDCANEN +#endif /* FDCAN1 */ +#if defined(USB_DRD_FS) +#define LL_APB1_GRP1_PERIPH_USB RCC_APBENR1_USBEN +#endif /* USB_DRD_FS */ +#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APBENR1_SPI2EN +#if defined(SPI3) +#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APBENR1_SPI3EN +#endif /* SPI3 */ +#if defined(CRS) +#define LL_APB1_GRP1_PERIPH_CRS RCC_APBENR1_CRSEN +#endif /* CRS */ +#define LL_APB1_GRP1_PERIPH_USART2 RCC_APBENR1_USART2EN +#if defined(USART3) +#define LL_APB1_GRP1_PERIPH_USART3 RCC_APBENR1_USART3EN +#endif /* USART3 */ +#if defined(USART4) +#define LL_APB1_GRP1_PERIPH_USART4 RCC_APBENR1_USART4EN +#endif /* USART4 */ +#if defined(LPUART1) +#define LL_APB1_GRP1_PERIPH_LPUART1 RCC_APBENR1_LPUART1EN +#endif /* LPUART1 */ +#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APBENR1_I2C1EN +#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APBENR1_I2C2EN +#if defined(I2C3) +#define LL_APB1_GRP1_PERIPH_I2C3 RCC_APBENR1_I2C3EN +#endif /* I2C3 */ +#if defined(CEC) +#define LL_APB1_GRP1_PERIPH_CEC RCC_APBENR1_CECEN +#endif /* CEC */ +#if defined(UCPD1) +#define LL_APB1_GRP1_PERIPH_UCPD1 RCC_APBENR1_UCPD1EN +#endif /* UCPD1 */ +#if defined(UCPD2) +#define LL_APB1_GRP1_PERIPH_UCPD2 RCC_APBENR1_UCPD2EN +#endif /* UCPD2 */ +#define LL_APB1_GRP1_PERIPH_DBGMCU RCC_APBENR1_DBGEN +#define LL_APB1_GRP1_PERIPH_PWR RCC_APBENR1_PWREN +#if defined(DAC1) +#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APBENR1_DAC1EN +#endif /* DAC1 */ +#if defined(LPTIM2) +#define LL_APB1_GRP1_PERIPH_LPTIM2 RCC_APBENR1_LPTIM2EN +#endif /* LPTIM2 */ +#if defined(LPTIM1) +#define LL_APB1_GRP1_PERIPH_LPTIM1 RCC_APBENR1_LPTIM1EN +#endif /* LPTIM1 */ +/** + * @} + */ + +/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH + * @{ + */ +#define LL_APB2_GRP1_PERIPH_ALL 0xFFFFFFFFU +#define LL_APB2_GRP1_PERIPH_SYSCFG RCC_APBENR2_SYSCFGEN +#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APBENR2_TIM1EN +#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APBENR2_SPI1EN +#define LL_APB2_GRP1_PERIPH_USART1 RCC_APBENR2_USART1EN +#if defined(TIM14) +#define LL_APB2_GRP1_PERIPH_TIM14 RCC_APBENR2_TIM14EN +#endif /* TIM14 */ +#if defined(TIM15) +#define LL_APB2_GRP1_PERIPH_TIM15 RCC_APBENR2_TIM15EN +#endif /* TIM15 */ +#if defined(TIM16) +#define LL_APB2_GRP1_PERIPH_TIM16 RCC_APBENR2_TIM16EN +#endif /* TIM16 */ +#if defined(TIM17) +#define LL_APB2_GRP1_PERIPH_TIM17 RCC_APBENR2_TIM17EN +#endif /* TIM17 */ +#if defined(ADC) +#define LL_APB2_GRP1_PERIPH_ADC RCC_APBENR2_ADCEN +#endif /* ADC */ +/** + * @} + */ + +/** @defgroup BUS_LL_EC_IOP_GRP1_PERIPH IOP GRP1 PERIPH + * @{ + */ +#define LL_IOP_GRP1_PERIPH_ALL 0xFFFFFFFFU +#define LL_IOP_GRP1_PERIPH_GPIOA RCC_IOPENR_GPIOAEN +#define LL_IOP_GRP1_PERIPH_GPIOB RCC_IOPENR_GPIOBEN +#define LL_IOP_GRP1_PERIPH_GPIOC RCC_IOPENR_GPIOCEN +#define LL_IOP_GRP1_PERIPH_GPIOD RCC_IOPENR_GPIODEN +#if defined(GPIOE) +#define LL_IOP_GRP1_PERIPH_GPIOE RCC_IOPENR_GPIOEEN +#endif /* GPIOE */ +#if defined(GPIOF) +#define LL_IOP_GRP1_PERIPH_GPIOF RCC_IOPENR_GPIOFEN +#endif /* GPIOF */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions + * @{ + */ + +/** @defgroup BUS_LL_EF_AHB1 AHB1 + * @{ + */ + +/** + * @brief Enable AHB1 peripherals clock. + * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_EnableClock\n + * AHBENR FLASHEN LL_AHB1_GRP1_EnableClock\n + * AHBENR CRCEN LL_AHB1_GRP1_EnableClock\n + * AHBENR AESEN LL_AHB1_GRP1_EnableClock\n + * AHBENR RNGEN LL_AHB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) + * @note (*) RNG & CRYP Peripherals available only on STM32G081xx + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHBENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHBENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB1 peripheral clock is enabled or not + * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR FLASHEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR AESEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR RNGEN LL_AHB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) + * @note (*) RNG & CRYP Peripherals available only on STM32G081xx + * @retval State of Periphs (1 or 0). + */ +__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->AHBENR, Periphs) == Periphs) ? 1UL : 0UL); +} + +/** + * @brief Disable AHB1 peripherals clock. + * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_DisableClock\n + * AHBENR FLASHEN LL_AHB1_GRP1_DisableClock\n + * AHBENR CRCEN LL_AHB1_GRP1_DisableClock\n + * AHBENR AESEN LL_AHB1_GRP1_DisableClock\n + * AHBENR RNGEN LL_AHB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) + * @note (*) RNG & CRYP Peripherals available only on STM32G081xx + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHBENR, Periphs); +} + +/** + * @brief Force AHB1 peripherals reset. + * @rmtoll AHBRSTR DMA1RST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR FLASHRST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR CRCRST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR AESRST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR RNGRST LL_AHB1_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_ALL + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) + * @note (*) RNG & CRYP Peripherals available only on STM32G081xx + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHBRSTR, Periphs); +} + +/** + * @brief Release AHB1 peripherals reset. + * @rmtoll AHBRSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR FLASHRST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR AESRST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR RNGRST LL_AHB1_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_ALL + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) + * @note (*) RNG & CRYP Peripherals available only on STM32G081xx + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHBRSTR, Periphs); +} + +/** + * @brief Enable AHB1 peripheral clocks in Sleep and Stop modes + * @rmtoll AHBSMENR DMA1SMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * AHBSMENR FLASHSMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * AHBSMENR SRAMSMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * AHBSMENR CRCSMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * AHBSMENR AESSMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * AHBSMENR RNGSMEN LL_AHB1_GRP1_EnableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) + * @note (*) RNG & CRYP Peripherals available only on STM32G081xx + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClockStopSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHBSMENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHBSMENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB1 peripheral clocks in Sleep and Stop modes + * @rmtoll AHBSMENR DMA1SMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * AHBSMENR FLASHSMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * AHBSMENR SRAMSMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * AHBSMENR CRCSMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * AHBSMENR AESSMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * AHBSMENR RNGSMEN LL_AHB1_GRP1_DisableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) + * @note (*) RNG & CRYP Peripherals available only on STM32G081xx + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClockStopSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHBSMENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB1 APB1 + * @{ + */ + +/** + * @brief Enable APB1 peripherals clock. + * @rmtoll APBENR1 TIM2EN LL_APB1_GRP1_EnableClock\n + * APBENR1 TIM3EN LL_APB1_GRP1_EnableClock\n + * APBENR1 TIM4EN LL_APB1_GRP1_EnableClock\n + * APBENR1 TIM6EN LL_APB1_GRP1_EnableClock\n + * APBENR1 TIM7EN LL_APB1_GRP1_EnableClock\n + * APBENR1 RTCAPBEN LL_APB1_GRP1_EnableClock\n + * APBENR1 WWDGEN LL_APB1_GRP1_EnableClock\n + * APBENR1 SPI2EN LL_APB1_GRP1_EnableClock\n + * APBENR1 SPI3EN LL_APB1_GRP1_EnableClock\n + * APBENR1 USART2EN LL_APB1_GRP1_EnableClock\n + * APBENR1 USART3EN LL_APB1_GRP1_EnableClock\n + * APBENR1 USART4EN LL_APB1_GRP1_EnableClock\n + * APBENR1 USART5EN LL_APB1_GRP1_EnableClock\n + * APBENR1 USART6EN LL_APB1_GRP1_EnableClock\n + * APBENR1 LPUART1EN LL_APB1_GRP1_EnableClock\n + * APBENR1 LPUART2EN LL_APB1_GRP1_EnableClock\n + * APBENR1 I2C1EN LL_APB1_GRP1_EnableClock\n + * APBENR1 I2C2EN LL_APB1_GRP1_EnableClock\n + * APBENR1 I2C3EN LL_APB1_GRP1_EnableClock\n + * APBENR1 CECEN LL_APB1_GRP1_EnableClock\n + * APBENR1 UCPD1EN LL_APB1_GRP1_EnableClock\n + * APBENR1 UCPD2EN LL_APB1_GRP1_EnableClock\n + * APBENR1 USBEN LL_APB1_GRP1_EnableClock\n + * APBENR1 FDCANEN LL_APB1_GRP1_EnableClock\n + * APBENR1 DBGEN LL_APB1_GRP1_EnableClock\n + * APBENR1 PWREN LL_APB1_GRP1_EnableClock\n + * APBENR1 DAC1EN LL_APB1_GRP1_EnableClock\n + * APBENR1 LPTIM2EN LL_APB1_GRP1_EnableClock\n + * APBENR1 LPTIM1EN LL_APB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_RTC + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (1) + * @arg @ref LL_APB1_GRP1_PERIPH_FDCAN (1) + * @arg @ref LL_APB1_GRP1_PERIPH_DBGMCU + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (1) + * @note Peripheral marked with (1) are not available all devices + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APBENR1, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APBENR1, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB1 peripheral clock is enabled or not + * @rmtoll APBENR1 TIM2EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 TIM3EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 TIM4EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 TIM6EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 TIM7EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 RTCAPBEN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 WWDGEN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 SPI2EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 SPI3EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 USART2EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 USART3EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 USART4EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 USART5EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 USART6EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 LPUART1EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 LPUART2EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 I2C1EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 I2C2EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 I2C3EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 CECEN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 UCPD1EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 UCPD2EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 USBEN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 FDCANEN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 DBGEN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 PWREN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 DAC1EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 LPTIM2EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 LPTIM1EN LL_APB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_RTC + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (1) + * @arg @ref LL_APB1_GRP1_PERIPH_FDCAN (1) + * @arg @ref LL_APB1_GRP1_PERIPH_DBGMCU + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (1) + * @note Peripheral marked with (1) are not available all devices + * @retval State of Periphs (1 or 0). + */ +__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APBENR1, Periphs) == (Periphs)) ? 1UL : 0UL); +} + +/** + * @brief Disable APB1 peripherals clock. + * @rmtoll APBENR1 TIM2EN LL_APB1_GRP1_DisableClock\n + * APBENR1 TIM3EN LL_APB1_GRP1_DisableClock\n + * APBENR1 TIM4EN LL_APB1_GRP1_DisableClock\n + * APBENR1 TIM6EN LL_APB1_GRP1_DisableClock\n + * APBENR1 TIM7EN LL_APB1_GRP1_DisableClock\n + * APBENR1 RTCAPBEN LL_APB1_GRP1_DisableClock\n + * APBENR1 WWDGEN LL_APB1_GRP1_DisableClock\n + * APBENR1 SPI2EN LL_APB1_GRP1_DisableClock\n + * APBENR1 SPI3EN LL_APB1_GRP1_DisableClock\n + * APBENR1 USART2EN LL_APB1_GRP1_DisableClock\n + * APBENR1 USART3EN LL_APB1_GRP1_DisableClock\n + * APBENR1 USART4EN LL_APB1_GRP1_DisableClock\n + * APBENR1 USART5EN LL_APB1_GRP1_DisableClock\n + * APBENR1 USART6EN LL_APB1_GRP1_DisableClock\n + * APBENR1 LPUART1EN LL_APB1_GRP1_DisableClock\n + * APBENR1 LPUART2EN LL_APB1_GRP1_DisableClock\n + * APBENR1 I2C1EN LL_APB1_GRP1_DisableClock\n + * APBENR1 I2C2EN LL_APB1_GRP1_DisableClock\n + * APBENR1 I2C3EN LL_APB1_GRP1_DisableClock\n + * APBENR1 CECEN LL_APB1_GRP1_DisableClock\n + * APBENR1 UCPD1EN LL_APB1_GRP1_DisableClock\n + * APBENR1 UCPD2EN LL_APB1_GRP1_DisableClock\n + * APBENR1 USBEN LL_APB1_GRP1_DisableClock\n + * APBENR1 FDCANEN LL_APB1_GRP1_DisableClock\n + * APBENR1 DBGEN LL_APB1_GRP1_DisableClock\n + * APBENR1 PWREN LL_APB1_GRP1_DisableClock\n + * APBENR1 DAC1EN LL_APB1_GRP1_DisableClock\n + * APBENR1 LPTIM2EN LL_APB1_GRP1_DisableClock\n + * APBENR1 LPTIM1EN LL_APB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_RTC + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (1) + * @arg @ref LL_APB1_GRP1_PERIPH_FDCAN (1) + * @arg @ref LL_APB1_GRP1_PERIPH_DBGMCU + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (1) + * @note Peripheral marked with (1) are not available all devices + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APBENR1, Periphs); +} + +/** + * @brief Force APB1 peripherals reset. + * @rmtoll APBRSTR1 TIM2RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 TIM3RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 TIM4RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 TIM6RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 TIM7RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 RTCRST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 SPI2RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 SPI3RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 USART2RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 USART3RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 USART4RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 USART5RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 USART6RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 LPUART1RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 LPUART2RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 I2C1RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 I2C2RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 I2C3RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 CECRST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 UCPD1RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 UCPD2RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 USBRST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 FDCANRST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 DBGRST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 PWRRST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 DAC1RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 LPTIM2RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 LPTIM1RST LL_APB1_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_RTC + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (1) + * @arg @ref LL_APB1_GRP1_PERIPH_FDCAN (1) + * @arg @ref LL_APB1_GRP1_PERIPH_DBGMCU + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (1) + * @note Peripheral marked with (1) are not available all devices + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APBRSTR1, Periphs); +} + +/** + * @brief Release APB1 peripherals reset. + * @rmtoll APBRSTR1 TIM2RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 TIM4RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 TIM6RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 TIM7RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 RTCRST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 SPI2RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 SPI3RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 USART2RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 USART3RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 USART4RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 USART5RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 USART6RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 LPUART1RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 LPUART2RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 I2C1RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 I2C2RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 I2C3RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 CECRST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 UCPD1RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 UCPD2RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 USBRST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 FDCANRST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 DBGRST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 PWRRST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 DAC1RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 LPTIM2RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 LPTIM1RST LL_APB1_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_RTC + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (1) + * @arg @ref LL_APB1_GRP1_PERIPH_FDCAN (1) + * @arg @ref LL_APB1_GRP1_PERIPH_DBGMCU + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (1) + * @note Peripheral marked with (1) are not available all devices + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APBRSTR1, Periphs); +} + +/** + * @brief Enable APB1 peripheral clocks in Sleep and Stop modes + * @rmtoll APBSMENR1 TIM2SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 TIM3SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 TIM4SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 TIM6SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 TIM7SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 RTCAPBSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 WWDGSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 SPI2SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 SPI3SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 USART2SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 USART3SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 USART4SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 USART5SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 USART6SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 LPUART1SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 LPUART2SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 I2C1SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 I2C2SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 I2C3SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 CECSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 UCPD1SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 UCPD2SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 USBSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 FDCANSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 DBGSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 PWRSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 DAC1SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 LPTIM2SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 LPTIM1SMEN LL_APB1_GRP1_EnableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_RTC + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (1) + * @arg @ref LL_APB1_GRP1_PERIPH_FDCAN (1) + * @arg @ref LL_APB1_GRP1_PERIPH_DBGMCU + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (1) + * @note Peripheral marked with (1) are not available all devices + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_EnableClockStopSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APBSMENR1, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APBSMENR1, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB1 peripheral clocks in Sleep and Stop modes + * @rmtoll APBSMENR1 TIM2SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 TIM3SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 TIM'SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 TIM6SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 TIM7SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 RTCAPBSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 WWDGSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 SPI2SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 SPI3SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 USART2SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 USART3SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 USART4SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 USART5SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 USART6SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 LPUART1SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 LPUART2SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 I2C1SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 I2C2SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 I2C3SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 CECSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 UCPD1SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 UCPD2SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 USBSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 FSCANSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 DBGSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 PWRSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 DAC1SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 LPTIM2SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 LPTIM1SMEN LL_APB1_GRP1_DisableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_RTC + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USART6 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPUART2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_UCPD2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (1) + * @arg @ref LL_APB1_GRP1_PERIPH_FDCAN (1) + * @arg @ref LL_APB1_GRP1_PERIPH_DBGMCU + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM2 (1) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (1) + * @note Peripheral marked with (1) are not available all devices + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_DisableClockStopSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APBSMENR1, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB2 APB2 + * @{ + */ + +/** + * @brief Enable APB2 peripherals clock. + * @rmtoll APBENR2 SYSCFGEN LL_APB2_GRP1_EnableClock\n + * APBENR2 TIM1EN LL_APB2_GRP1_EnableClock\n + * APBENR2 SPI1EN LL_APB2_GRP1_EnableClock\n + * APBENR2 USART1EN LL_APB2_GRP1_EnableClock\n + * APBENR2 TIM14EN LL_APB2_GRP1_EnableClock\n + * APBENR2 TIM15EN LL_APB2_GRP1_EnableClock\n + * APBENR2 TIM16EN LL_APB2_GRP1_EnableClock\n + * APBENR2 TIM17EN LL_APB2_GRP1_EnableClock\n + * APBENR2 ADCEN LL_APB2_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @note (*) peripheral not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APBENR2, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APBENR2, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB2 peripheral clock is enabled or not + * @rmtoll APBENR2 SYSCFGEN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 TIM1EN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 SPI1EN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 USART1EN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 TIM14EN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 TIM15EN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 TIM16EN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 TIM17EN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 ADCEN LL_APB2_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @note (*) peripheral not available on all devices + * @retval State of Periphs (1 or 0). + */ +__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APBENR2, Periphs) == (Periphs)) ? 1UL : 0UL); +} + +/** + * @brief Disable APB2 peripherals clock. + * @rmtoll APBENR2 SYSCFGEN LL_APB2_GRP1_DisableClock\n + * APBENR2 TIM1EN LL_APB2_GRP1_DisableClock\n + * APBENR2 SPI1EN LL_APB2_GRP1_DisableClock\n + * APBENR2 USART1EN LL_APB2_GRP1_DisableClock\n + * APBENR2 TIM14EN LL_APB2_GRP1_DisableClock\n + * APBENR2 TIM15EN LL_APB2_GRP1_DisableClock\n + * APBENR2 TIM16EN LL_APB2_GRP1_DisableClock\n + * APBENR2 TIM17EN LL_APB2_GRP1_DisableClock\n + * APBENR2 ADCEN LL_APB2_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @note (*) peripheral not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APBENR2, Periphs); +} + +/** + * @brief Force APB2 peripherals reset. + * @rmtoll APBRSTR2 SYSCFGRST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 TIM1RST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 SPI1RST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 USART1RST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 TIM14RST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 TIM15RST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 TIM16RST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 TIM17RST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 ADCRST LL_APB2_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ALL + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @note (*) peripheral not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APBRSTR2, Periphs); +} + +/** + * @brief Release APB2 peripherals reset. + * @rmtoll APBRSTR2 SYSCFGRST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 TIM1RST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 SPI1RST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 USART1RST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 TIM14RST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 TIM15RST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 TIM16RST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 TIM17RST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 ADCRST LL_APB2_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ALL + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @note (*) peripheral not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APBRSTR2, Periphs); +} + +/** + * @brief Enable APB2 peripheral clocks in Sleep and Stop modes + * @rmtoll APBSMENR2 SYSCFGSMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 TIM1SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 SPI1SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 USART1SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 TIM14SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 TIM15SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 TIM16SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 TIM17SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 ADCSMEN LL_APB2_GRP1_EnableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @note (*) peripheral not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_EnableClockStopSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APBSMENR2, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APBSMENR2, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB2 peripheral clocks in Sleep and Stop modes + * @rmtoll APBSMENR2 SYSCFGSMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 TIM1SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 SPI1SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 USART1SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 TIM14SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 TIM15SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 TIM16SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 TIM17SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 ADCSMEN LL_APB2_GRP1_DisableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @note (*) peripheral not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_DisableClockStopSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APBSMENR2, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_IOP IOP + * @{ + */ + +/** + * @brief Enable IOP peripherals clock. + * @rmtoll IOPENR GPIOAEN LL_IOP_GRP1_EnableClock\n + * IOPENR GPIOBEN LL_IOP_GRP1_EnableClock\n + * IOPENR GPIOCEN LL_IOP_GRP1_EnableClock\n + * IOPENR GPIODEN LL_IOP_GRP1_EnableClock\n + * IOPENR GPIOEEN LL_IOP_GRP1_EnableClock\n + * IOPENR GPIOFEN LL_IOP_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOE + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOF + * @retval None + */ +__STATIC_INLINE void LL_IOP_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->IOPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->IOPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if IOP peripheral clock is enabled or not + * @rmtoll IOPENR GPIOAEN LL_IOP_GRP1_IsEnabledClock\n + * IOPENR GPIOBEN LL_IOP_GRP1_IsEnabledClock\n + * IOPENR GPIOCEN LL_IOP_GRP1_IsEnabledClock\n + * IOPENR GPIODEN LL_IOP_GRP1_IsEnabledClock\n + * IOPENR GPIOEEN LL_IOP_GRP1_IsEnabledClock\n + * IOPENR GPIOFEN LL_IOP_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOE + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOF + * @retval State of Periphs (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IOP_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->IOPENR, Periphs) == Periphs) ? 1UL : 0UL); +} + +/** + * @brief Disable IOP peripherals clock. + * @rmtoll IOPENR GPIOAEN LL_IOP_GRP1_DisableClock\n + * IOPENR GPIOBEN LL_IOP_GRP1_DisableClock\n + * IOPENR GPIOCEN LL_IOP_GRP1_DisableClock\n + * IOPENR GPIODEN LL_IOP_GRP1_DisableClock\n + * IOPENR GPIOEEN LL_IOP_GRP1_DisableClock\n + * IOPENR GPIOFEN LL_IOP_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOE + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOF + * @retval None + */ +__STATIC_INLINE void LL_IOP_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->IOPENR, Periphs); +} + +/** + * @brief Disable IOP peripherals clock. + * @rmtoll IOPRSTR GPIOARST LL_IOP_GRP1_ForceReset\n + * IOPRSTR GPIOBRST LL_IOP_GRP1_ForceReset\n + * IOPRSTR GPIOCRST LL_IOP_GRP1_ForceReset\n + * IOPRSTR GPIODRST LL_IOP_GRP1_ForceReset\n + * IOPRSTR GPIOERST LL_IOP_GRP1_ForceReset\n + * IOPRSTR GPIOFRST LL_IOP_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_IOP_GRP1_PERIPH_ALL + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOE + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOF + * @retval None + */ +__STATIC_INLINE void LL_IOP_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->IOPRSTR, Periphs); +} + +/** + * @brief Release IOP peripherals reset. + * @rmtoll IOPRSTR GPIOARST LL_IOP_GRP1_ReleaseReset\n + * IOPRSTR GPIOBRST LL_IOP_GRP1_ReleaseReset\n + * IOPRSTR GPIOCRST LL_IOP_GRP1_ReleaseReset\n + * IOPRSTR GPIODRST LL_IOP_GRP1_ReleaseReset\n + * IOPRSTR GPIOERST LL_IOP_GRP1_ReleaseReset\n + * IOPRSTR GPIOFRST LL_IOP_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_IOP_GRP1_PERIPH_ALL + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOE + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOF + * @retval None + */ +__STATIC_INLINE void LL_IOP_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->IOPRSTR, Periphs); +} + +/** + * @brief Enable IOP peripheral clocks in Sleep and Stop modes + * @rmtoll IOPSMENR GPIOASMEN LL_IOP_GRP1_EnableClockStopSleep\n + * IOPSMENR GPIOBSMEN LL_IOP_GRP1_EnableClockStopSleep\n + * IOPSMENR GPIOCSMEN LL_IOP_GRP1_EnableClockStopSleep\n + * IOPSMENR GPIODSMEN LL_IOP_GRP1_EnableClockStopSleep\n + * IOPSMENR GPIOESMEN LL_IOP_GRP1_EnableClockStopSleep\n + * IOPSMENR GPIOFSMEN LL_IOP_GRP1_EnableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOE + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOF + * @retval None + */ +__STATIC_INLINE void LL_IOP_GRP1_EnableClockStopSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->IOPSMENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->IOPSMENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable IOP peripheral clocks in Sleep and Stop modes + * @rmtoll IOPSMENR GPIOASMEN LL_IOP_GRP1_DisableClockStopSleep\n + * IOPSMENR GPIOBSMEN LL_IOP_GRP1_DisableClockStopSleep\n + * IOPSMENR GPIOCSMEN LL_IOP_GRP1_DisableClockStopSleep\n + * IOPSMENR GPIODSMEN LL_IOP_GRP1_DisableClockStopSleep\n + * IOPSMENR GPIOESMEN LL_IOP_GRP1_DisableClockStopSleep\n + * IOPSMENR GPIOFSMEN LL_IOP_GRP1_DisableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOE + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOF + * @retval None + */ +__STATIC_INLINE void LL_IOP_GRP1_DisableClockStopSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->IOPSMENR, Periphs); +} + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* RCC */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_BUS_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_cortex.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_cortex.h new file mode 100644 index 0000000..518e081 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_cortex.h @@ -0,0 +1,585 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX LL module. + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL CORTEX driver contains a set of generic APIs that can be + used by user: + (+) SYSTICK configuration used by LL_mDelay and LL_Init1msTick + functions + (+) Low power mode configuration (SCB register of Cortex-MCU) + (+) MPU API to configure and enable regions + (+) API to access to MCU info (CPUID register) + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_CORTEX_H +#define STM32G0xx_LL_CORTEX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +/** @defgroup CORTEX_LL CORTEX + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source + * @{ + */ +#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U /*!< AHB clock divided by 8 selected as SysTick clock source.*/ +#define LL_SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk /*!< AHB clock selected as SysTick clock source. */ +/** + * @} + */ + +#if __MPU_PRESENT + +/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control + * @{ + */ +#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE 0x00000000U /*!< Disable NMI and privileged SW access */ +#define LL_MPU_CTRL_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */ +#define LL_MPU_CTRL_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk /*!< Enable privileged software access to default memory map */ +#define LL_MPU_CTRL_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION MPU Region Number + * @{ + */ +#define LL_MPU_REGION_NUMBER0 0x00U /*!< REGION Number 0 */ +#define LL_MPU_REGION_NUMBER1 0x01U /*!< REGION Number 1 */ +#define LL_MPU_REGION_NUMBER2 0x02U /*!< REGION Number 2 */ +#define LL_MPU_REGION_NUMBER3 0x03U /*!< REGION Number 3 */ +#define LL_MPU_REGION_NUMBER4 0x04U /*!< REGION Number 4 */ +#define LL_MPU_REGION_NUMBER5 0x05U /*!< REGION Number 5 */ +#define LL_MPU_REGION_NUMBER6 0x06U /*!< REGION Number 6 */ +#define LL_MPU_REGION_NUMBER7 0x07U /*!< REGION Number 7 */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size + * @{ + */ +#define LL_MPU_REGION_SIZE_256B (0x07U << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512B (0x08U << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1KB (0x09U << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2KB (0x0AU << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4KB (0x0BU << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_8KB (0x0CU << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_16KB (0x0DU << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_32KB (0x0EU << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64KB (0x0FU << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128KB (0x10U << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256KB (0x11U << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512KB (0x12U << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1MB (0x13U << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2MB (0x14U << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4MB (0x15U << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_8MB (0x16U << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_16MB (0x17U << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_32MB (0x18U << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64MB (0x19U << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128MB (0x1AU << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256MB (0x1BU << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512MB (0x1CU << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1GB (0x1DU << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2GB (0x1EU << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4GB (0x1FU << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges + * @{ + */ +#define LL_MPU_REGION_NO_ACCESS (0x00U << MPU_RASR_AP_Pos) /*!< No access*/ +#define LL_MPU_REGION_PRIV_RW (0x01U << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/ +#define LL_MPU_REGION_PRIV_RW_URO (0x02U << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user program generates a fault) */ +#define LL_MPU_REGION_FULL_ACCESS (0x03U << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */ +#define LL_MPU_REGION_PRIV_RO (0x05U << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/ +#define LL_MPU_REGION_PRIV_RO_URO (0x06U << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level + * @{ + */ +#define LL_MPU_TEX_LEVEL0 (0x00U << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */ +#define LL_MPU_TEX_LEVEL1 (0x01U << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */ +#define LL_MPU_TEX_LEVEL2 (0x02U << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */ +#define LL_MPU_TEX_LEVEL4 (0x04U << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access + * @{ + */ +#define LL_MPU_INSTRUCTION_ACCESS_ENABLE 0x00U /*!< Instruction fetches enabled */ +#define LL_MPU_INSTRUCTION_ACCESS_DISABLE MPU_RASR_XN_Msk /*!< Instruction fetches disabled*/ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access + * @{ + */ +#define LL_MPU_ACCESS_SHAREABLE MPU_RASR_S_Msk /*!< Shareable memory attribute */ +#define LL_MPU_ACCESS_NOT_SHAREABLE 0x00U /*!< Not Shareable memory attribute */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access + * @{ + */ +#define LL_MPU_ACCESS_CACHEABLE MPU_RASR_C_Msk /*!< Cacheable memory attribute */ +#define LL_MPU_ACCESS_NOT_CACHEABLE 0x00U /*!< Not Cacheable memory attribute */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access + * @{ + */ +#define LL_MPU_ACCESS_BUFFERABLE MPU_RASR_B_Msk /*!< Bufferable memory attribute */ +#define LL_MPU_ACCESS_NOT_BUFFERABLE 0x00U /*!< Not Bufferable memory attribute */ +/** + * @} + */ +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions + * @{ + */ + +/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK + * @{ + */ + +/** + * @brief This function checks if the Systick counter flag is active or not. + * @note It can be used in timeout function on application side. + * @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void) +{ + return (((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk)) ? 1UL : 0UL); +} + +/** + * @brief Configures the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source) +{ + if (Source == LL_SYSTICK_CLKSOURCE_HCLK) + { + SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); + } + else + { + CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); + } +} + +/** + * @brief Get the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK + */ +__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void) +{ + return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); +} + +/** + * @brief Enable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_EnableIT(void) +{ + SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Disable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_DisableIT(void) +{ + CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Checks if the SYSTICK interrupt is enabled or disabled. + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void) +{ + return ((READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE + * @{ + */ + +/** + * @brief Processor uses sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableSleep(void) +{ + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + +/** + * @brief Processor uses deep sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableDeepSleep(void) +{ + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + +/** + * @brief Configures sleep-on-exit when returning from Handler mode to Thread mode. + * @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an + * empty main application. + * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + +/** + * @brief Do not sleep when returning to Thread mode. + * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit + * @retval None + */ +__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + +/** + * @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the + * processor. + * @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableEventOnPend(void) +{ + /* Set SEVEONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are + * excluded + * @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend + * @retval None + */ +__STATIC_INLINE void LL_LPM_DisableEventOnPend(void) +{ + /* Clear SEVEONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO + * @{ + */ + +/** + * @brief Get Implementer code + * @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer + * @retval Value should be equal to 0x41 for ARM + */ +__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos); +} + +/** + * @brief Get Variant number (The r value in the rnpn product revision identifier) + * @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant + * @retval Value between 0 and 255 (0x0: revision 0) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos); +} + +/** + * @brief Get Architecture number + * @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetArchitecture + * @retval Value should be equal to 0xC for Cortex-M0+ devices + */ +__STATIC_INLINE uint32_t LL_CPUID_GetArchitecture(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos); +} + +/** + * @brief Get Part number + * @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo + * @retval Value should be equal to 0xC60 for Cortex-M0+ + */ +__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos); +} + +/** + * @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release) + * @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision + * @retval Value between 0 and 255 (0x1: patch 1) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos); +} + +/** + * @} + */ + +#if __MPU_PRESENT +/** @defgroup CORTEX_LL_EF_MPU MPU + * @{ + */ + +/** + * @brief Enable MPU with input options + * @rmtoll MPU_CTRL ENABLE LL_MPU_Enable + * @param Options This parameter can be one of the following values: + * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE + * @arg @ref LL_MPU_CTRL_HARDFAULT_NMI + * @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT + * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF + * @retval None + */ +__STATIC_INLINE void LL_MPU_Enable(uint32_t Options) +{ + /* Enable the MPU*/ + WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options)); + /* Ensure MPU settings take effects */ + __DSB(); + /* Sequence instruction fetches using update settings */ + __ISB(); +} + +/** + * @brief Disable MPU + * @rmtoll MPU_CTRL ENABLE LL_MPU_Disable + * @retval None + */ +__STATIC_INLINE void LL_MPU_Disable(void) +{ + /* Make sure outstanding transfers are done */ + __DMB(); + /* Disable MPU*/ + WRITE_REG(MPU->CTRL, 0U); +} + +/** + * @brief Check if MPU is enabled or not + * @rmtoll MPU_CTRL ENABLE LL_MPU_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void) +{ + return ((READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk)) ? 1UL : 0UL); +} + +/** + * @brief Enable a MPU region + * @rmtoll MPU_RASR ENABLE LL_MPU_EnableRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @retval None + */ +__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Enable the MPU region */ + SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @brief Configure and enable a region + * @rmtoll MPU_RNR REGION LL_MPU_ConfigRegion\n + * MPU_RBAR REGION LL_MPU_ConfigRegion\n + * MPU_RBAR ADDR LL_MPU_ConfigRegion\n + * MPU_RASR XN LL_MPU_ConfigRegion\n + * MPU_RASR AP LL_MPU_ConfigRegion\n + * MPU_RASR S LL_MPU_ConfigRegion\n + * MPU_RASR C LL_MPU_ConfigRegion\n + * MPU_RASR B LL_MPU_ConfigRegion\n + * MPU_RASR SIZE LL_MPU_ConfigRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @param Address Value of region base address + * @param SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF + * @param Attributes This parameter can be a combination of the following values: + * @arg @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B + * or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB + * or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB + * or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB + * or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB + * or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB + * @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO or @ref LL_MPU_REGION_FULL_ACCESS + * or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO + * @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 or @ref LL_MPU_TEX_LEVEL4 + * @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE + * @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE + * @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE + * @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE + * @retval None + */ +__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, uint32_t Attributes) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Set base address */ + WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U)); + /* Configure MPU */ + WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | (SubRegionDisable << MPU_RASR_SRD_Pos))); +} + +/** + * @brief Disable a region + * @rmtoll MPU_RNR REGION LL_MPU_DisableRegion\n + * MPU_RASR ENABLE LL_MPU_DisableRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @retval None + */ +__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Disable the MPU region */ + CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @} + */ + +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_CORTEX_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_crc.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_crc.h new file mode 100644 index 0000000..901a147 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_crc.h @@ -0,0 +1,461 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_crc.h + * @author MCD Application Team + * @brief Header file of CRC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_CRC_H +#define STM32G0xx_LL_CRC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined(CRC) + +/** @defgroup CRC_LL CRC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRC_LL_Exported_Constants CRC Exported Constants + * @{ + */ + +/** @defgroup CRC_LL_EC_POLYLENGTH Polynomial length + * @{ + */ +#define LL_CRC_POLYLENGTH_32B 0x00000000U /*!< 32 bits Polynomial size */ +#define LL_CRC_POLYLENGTH_16B CRC_CR_POLYSIZE_0 /*!< 16 bits Polynomial size */ +#define LL_CRC_POLYLENGTH_8B CRC_CR_POLYSIZE_1 /*!< 8 bits Polynomial size */ +#define LL_CRC_POLYLENGTH_7B (CRC_CR_POLYSIZE_1 | CRC_CR_POLYSIZE_0) /*!< 7 bits Polynomial size */ +/** + * @} + */ + +/** @defgroup CRC_LL_EC_INDATA_REVERSE Input Data Reverse + * @{ + */ +#define LL_CRC_INDATA_REVERSE_NONE 0x00000000U /*!< Input Data bit order not affected */ +#define LL_CRC_INDATA_REVERSE_BYTE CRC_CR_REV_IN_0 /*!< Input Data bit reversal done by byte */ +#define LL_CRC_INDATA_REVERSE_HALFWORD CRC_CR_REV_IN_1 /*!< Input Data bit reversal done by half-word */ +#define LL_CRC_INDATA_REVERSE_WORD (CRC_CR_REV_IN_1 | CRC_CR_REV_IN_0) /*!< Input Data bit reversal done by word */ +/** + * @} + */ + +/** @defgroup CRC_LL_EC_OUTDATA_REVERSE Output Data Reverse + * @{ + */ +#define LL_CRC_OUTDATA_REVERSE_NONE 0x00000000U /*!< Output Data bit order not affected */ +#define LL_CRC_OUTDATA_REVERSE_BIT CRC_CR_REV_OUT /*!< Output Data bit reversal done by bit */ +/** + * @} + */ + +/** @defgroup CRC_LL_EC_Default_Polynomial_Value Default CRC generating polynomial value + * @brief Normal representation of this polynomial value is + * X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2 + X + 1 . + * @{ + */ +#define LL_CRC_DEFAULT_CRC32_POLY 0x04C11DB7U /*!< Default CRC generating polynomial value */ +/** + * @} + */ + +/** @defgroup CRC_LL_EC_Default_InitValue Default CRC computation initialization value + * @{ + */ +#define LL_CRC_DEFAULT_CRC_INITVALUE 0xFFFFFFFFU /*!< Default CRC computation initialization value */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup CRC_LL_Exported_Macros CRC Exported Macros + * @{ + */ + +/** @defgroup CRC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in CRC register + * @param __INSTANCE__ CRC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_CRC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, __VALUE__) + +/** + * @brief Read a value in CRC register + * @param __INSTANCE__ CRC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_CRC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRC_LL_Exported_Functions CRC Exported Functions + * @{ + */ + +/** @defgroup CRC_LL_EF_Configuration CRC Configuration functions + * @{ + */ + +/** + * @brief Reset the CRC calculation unit. + * @note If Programmable Initial CRC value feature + * is available, also set the Data Register to the value stored in the + * CRC_INIT register, otherwise, reset Data Register to its default value. + * @rmtoll CR RESET LL_CRC_ResetCRCCalculationUnit + * @param CRCx CRC Instance + * @retval None + */ +__STATIC_INLINE void LL_CRC_ResetCRCCalculationUnit(CRC_TypeDef *CRCx) +{ + SET_BIT(CRCx->CR, CRC_CR_RESET); +} + +/** + * @brief Configure size of the polynomial. + * @rmtoll CR POLYSIZE LL_CRC_SetPolynomialSize + * @param CRCx CRC Instance + * @param PolySize This parameter can be one of the following values: + * @arg @ref LL_CRC_POLYLENGTH_32B + * @arg @ref LL_CRC_POLYLENGTH_16B + * @arg @ref LL_CRC_POLYLENGTH_8B + * @arg @ref LL_CRC_POLYLENGTH_7B + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetPolynomialSize(CRC_TypeDef *CRCx, uint32_t PolySize) +{ + MODIFY_REG(CRCx->CR, CRC_CR_POLYSIZE, PolySize); +} + +/** + * @brief Return size of the polynomial. + * @rmtoll CR POLYSIZE LL_CRC_GetPolynomialSize + * @param CRCx CRC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRC_POLYLENGTH_32B + * @arg @ref LL_CRC_POLYLENGTH_16B + * @arg @ref LL_CRC_POLYLENGTH_8B + * @arg @ref LL_CRC_POLYLENGTH_7B + */ +__STATIC_INLINE uint32_t LL_CRC_GetPolynomialSize(const CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_POLYSIZE)); +} + +/** + * @brief Configure the reversal of the bit order of the input data + * @rmtoll CR REV_IN LL_CRC_SetInputDataReverseMode + * @param CRCx CRC Instance + * @param ReverseMode This parameter can be one of the following values: + * @arg @ref LL_CRC_INDATA_REVERSE_NONE + * @arg @ref LL_CRC_INDATA_REVERSE_BYTE + * @arg @ref LL_CRC_INDATA_REVERSE_HALFWORD + * @arg @ref LL_CRC_INDATA_REVERSE_WORD + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetInputDataReverseMode(CRC_TypeDef *CRCx, uint32_t ReverseMode) +{ + MODIFY_REG(CRCx->CR, CRC_CR_REV_IN, ReverseMode); +} + +/** + * @brief Return type of reversal for input data bit order + * @rmtoll CR REV_IN LL_CRC_GetInputDataReverseMode + * @param CRCx CRC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRC_INDATA_REVERSE_NONE + * @arg @ref LL_CRC_INDATA_REVERSE_BYTE + * @arg @ref LL_CRC_INDATA_REVERSE_HALFWORD + * @arg @ref LL_CRC_INDATA_REVERSE_WORD + */ +__STATIC_INLINE uint32_t LL_CRC_GetInputDataReverseMode(const CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_REV_IN)); +} + +/** + * @brief Configure the reversal of the bit order of the Output data + * @rmtoll CR REV_OUT LL_CRC_SetOutputDataReverseMode + * @param CRCx CRC Instance + * @param ReverseMode This parameter can be one of the following values: + * @arg @ref LL_CRC_OUTDATA_REVERSE_NONE + * @arg @ref LL_CRC_OUTDATA_REVERSE_BIT + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetOutputDataReverseMode(CRC_TypeDef *CRCx, uint32_t ReverseMode) +{ + MODIFY_REG(CRCx->CR, CRC_CR_REV_OUT, ReverseMode); +} + +/** + * @brief Return type of reversal of the bit order of the Output data + * @rmtoll CR REV_OUT LL_CRC_GetOutputDataReverseMode + * @param CRCx CRC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRC_OUTDATA_REVERSE_NONE + * @arg @ref LL_CRC_OUTDATA_REVERSE_BIT + */ +__STATIC_INLINE uint32_t LL_CRC_GetOutputDataReverseMode(const CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_REV_OUT)); +} + +/** + * @brief Initialize the Programmable initial CRC value. + * @note If the CRC size is less than 32 bits, the least significant bits + * are used to write the correct value + * @note LL_CRC_DEFAULT_CRC_INITVALUE could be used as value for InitCrc parameter. + * @rmtoll INIT INIT LL_CRC_SetInitialData + * @param CRCx CRC Instance + * @param InitCrc Value to be programmed in Programmable initial CRC value register + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetInitialData(CRC_TypeDef *CRCx, uint32_t InitCrc) +{ + WRITE_REG(CRCx->INIT, InitCrc); +} + +/** + * @brief Return current Initial CRC value. + * @note If the CRC size is less than 32 bits, the least significant bits + * are used to read the correct value + * @rmtoll INIT INIT LL_CRC_GetInitialData + * @param CRCx CRC Instance + * @retval Value programmed in Programmable initial CRC value register + */ +__STATIC_INLINE uint32_t LL_CRC_GetInitialData(const CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->INIT)); +} + +/** + * @brief Initialize the Programmable polynomial value + * (coefficients of the polynomial to be used for CRC calculation). + * @note LL_CRC_DEFAULT_CRC32_POLY could be used as value for PolynomCoef parameter. + * @note Please check Reference Manual and existing Errata Sheets, + * regarding possible limitations for Polynomial values usage. + * For example, for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 + * @rmtoll POL POL LL_CRC_SetPolynomialCoef + * @param CRCx CRC Instance + * @param PolynomCoef Value to be programmed in Programmable Polynomial value register + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetPolynomialCoef(CRC_TypeDef *CRCx, uint32_t PolynomCoef) +{ + WRITE_REG(CRCx->POL, PolynomCoef); +} + +/** + * @brief Return current Programmable polynomial value + * @note Please check Reference Manual and existing Errata Sheets, + * regarding possible limitations for Polynomial values usage. + * For example, for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 + * @rmtoll POL POL LL_CRC_GetPolynomialCoef + * @param CRCx CRC Instance + * @retval Value programmed in Programmable Polynomial value register + */ +__STATIC_INLINE uint32_t LL_CRC_GetPolynomialCoef(const CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->POL)); +} + +/** + * @} + */ + +/** @defgroup CRC_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Write given 32-bit data to the CRC calculator + * @rmtoll DR DR LL_CRC_FeedData32 + * @param CRCx CRC Instance + * @param InData value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_FeedData32(CRC_TypeDef *CRCx, uint32_t InData) +{ + WRITE_REG(CRCx->DR, InData); +} + +/** + * @brief Write given 16-bit data to the CRC calculator + * @rmtoll DR DR LL_CRC_FeedData16 + * @param CRCx CRC Instance + * @param InData 16 bit value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_FeedData16(CRC_TypeDef *CRCx, uint16_t InData) +{ + __IO uint16_t *pReg; + + pReg = (__IO uint16_t *)(__IO void *)(&CRCx->DR); /* Derogation MisraC2012 R.11.5 */ + *pReg = InData; +} + +/** + * @brief Write given 8-bit data to the CRC calculator + * @rmtoll DR DR LL_CRC_FeedData8 + * @param CRCx CRC Instance + * @param InData 8 bit value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_FeedData8(CRC_TypeDef *CRCx, uint8_t InData) +{ + *(uint8_t __IO *)(&CRCx->DR) = (uint8_t) InData; +} + +/** + * @brief Return current CRC calculation result. 32 bits value is returned. + * @rmtoll DR DR LL_CRC_ReadData32 + * @param CRCx CRC Instance + * @retval Current CRC calculation result as stored in CRC_DR register (32 bits). + */ +__STATIC_INLINE uint32_t LL_CRC_ReadData32(const CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->DR)); +} + +/** + * @brief Return current CRC calculation result. 16 bits value is returned. + * @note This function is expected to be used in a 16 bits CRC polynomial size context. + * @rmtoll DR DR LL_CRC_ReadData16 + * @param CRCx CRC Instance + * @retval Current CRC calculation result as stored in CRC_DR register (16 bits). + */ +__STATIC_INLINE uint16_t LL_CRC_ReadData16(const CRC_TypeDef *CRCx) +{ + return (uint16_t)READ_REG(CRCx->DR); +} + +/** + * @brief Return current CRC calculation result. 8 bits value is returned. + * @note This function is expected to be used in a 8 bits CRC polynomial size context. + * @rmtoll DR DR LL_CRC_ReadData8 + * @param CRCx CRC Instance + * @retval Current CRC calculation result as stored in CRC_DR register (8 bits). + */ +__STATIC_INLINE uint8_t LL_CRC_ReadData8(const CRC_TypeDef *CRCx) +{ + return (uint8_t)READ_REG(CRCx->DR); +} + +/** + * @brief Return current CRC calculation result. 7 bits value is returned. + * @note This function is expected to be used in a 7 bits CRC polynomial size context. + * @rmtoll DR DR LL_CRC_ReadData7 + * @param CRCx CRC Instance + * @retval Current CRC calculation result as stored in CRC_DR register (7 bits). + */ +__STATIC_INLINE uint8_t LL_CRC_ReadData7(const CRC_TypeDef *CRCx) +{ + return (uint8_t)(READ_REG(CRCx->DR) & 0x7FU); +} + +/** + * @brief Return data stored in the Independent Data(IDR) register. + * @note This register can be used as a temporary storage location for one 32-bit long data. + * @rmtoll IDR IDR LL_CRC_Read_IDR + * @param CRCx CRC Instance + * @retval Value stored in CRC_IDR register (General-purpose 32-bit data register). + */ +__STATIC_INLINE uint32_t LL_CRC_Read_IDR(const CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->IDR)); +} + +/** + * @brief Store data in the Independent Data(IDR) register. + * @note This register can be used as a temporary storage location for one 32-bit long data. + * @rmtoll IDR IDR LL_CRC_Write_IDR + * @param CRCx CRC Instance + * @param InData value to be stored in CRC_IDR register (32-bit) between Min_Data=0 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_Write_IDR(CRC_TypeDef *CRCx, uint32_t InData) +{ + *((uint32_t __IO *)(&CRCx->IDR)) = (uint32_t) InData; +} +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup CRC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_CRC_DeInit(const CRC_TypeDef *CRCx); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(CRC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_CRC_H */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_crs.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_crs.h new file mode 100644 index 0000000..9c96713 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_crs.h @@ -0,0 +1,780 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_crs.h + * @author MCD Application Team + * @brief Header file of CRS LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2019 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_CRS_H +#define STM32G0xx_LL_CRS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined(CRS) + +/** @defgroup CRS_LL CRS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRS_LL_Exported_Constants CRS Exported Constants + * @{ + */ + +/** @defgroup CRS_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_CRS_ReadReg function + * @{ + */ +#define LL_CRS_ISR_SYNCOKF CRS_ISR_SYNCOKF +#define LL_CRS_ISR_SYNCWARNF CRS_ISR_SYNCWARNF +#define LL_CRS_ISR_ERRF CRS_ISR_ERRF +#define LL_CRS_ISR_ESYNCF CRS_ISR_ESYNCF +#define LL_CRS_ISR_SYNCERR CRS_ISR_SYNCERR +#define LL_CRS_ISR_SYNCMISS CRS_ISR_SYNCMISS +#define LL_CRS_ISR_TRIMOVF CRS_ISR_TRIMOVF +/** + * @} + */ + +/** @defgroup CRS_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_CRS_ReadReg and LL_CRS_WriteReg functions + * @{ + */ +#define LL_CRS_CR_SYNCOKIE CRS_CR_SYNCOKIE +#define LL_CRS_CR_SYNCWARNIE CRS_CR_SYNCWARNIE +#define LL_CRS_CR_ERRIE CRS_CR_ERRIE +#define LL_CRS_CR_ESYNCIE CRS_CR_ESYNCIE +/** + * @} + */ + +/** @defgroup CRS_LL_EC_SYNC_DIV Synchronization Signal Divider + * @{ + */ +#define LL_CRS_SYNC_DIV_1 0x00000000U /*!< Synchro Signal not divided (default) */ +#define LL_CRS_SYNC_DIV_2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */ +#define LL_CRS_SYNC_DIV_4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */ +#define LL_CRS_SYNC_DIV_8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */ +#define LL_CRS_SYNC_DIV_16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */ +#define LL_CRS_SYNC_DIV_32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */ +#define LL_CRS_SYNC_DIV_64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */ +#define LL_CRS_SYNC_DIV_128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_SYNC_SOURCE Synchronization Signal Source + * @{ + */ +#define LL_CRS_SYNC_SOURCE_GPIO 0x00000000U /*!< Synchro Signal source GPIO */ +#define LL_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */ +#define LL_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_SYNC_POLARITY Synchronization Signal Polarity + * @{ + */ +#define LL_CRS_SYNC_POLARITY_RISING 0x00000000U /*!< Synchro Active on rising edge (default) */ +#define LL_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_FREQERRORDIR Frequency Error Direction + * @{ + */ +#define LL_CRS_FREQ_ERROR_DIR_UP 0x00000000U /*!< Upcounting direction, the actual frequency is above the target */ +#define LL_CRS_FREQ_ERROR_DIR_DOWN CRS_ISR_FEDIR /*!< Downcounting direction, the actual frequency is below the target */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_DEFAULTVALUES Default Values + * @{ + */ +/** + * @brief Reset value of the RELOAD field + * @note The reset value of the RELOAD field corresponds to a target frequency of 48 MHz + * and a synchronization signal frequency of 1 kHz (SOF signal from USB) + */ +#define LL_CRS_RELOADVALUE_DEFAULT 0x0000BB7FU + +/** + * @brief Reset value of Frequency error limit. + */ +#define LL_CRS_ERRORLIMIT_DEFAULT 0x00000022U + +/** + * @brief Reset value of the HSI48 Calibration field + * @note The default value is 64, which corresponds to the middle of the trimming interval. + * The trimming step is specified in the product datasheet. + * A higher TRIM value corresponds to a higher output frequency. + */ +#define LL_CRS_HSI48CALIBRATION_DEFAULT 0x00000040U +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup CRS_LL_Exported_Macros CRS Exported Macros + * @{ + */ + +/** @defgroup CRS_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in CRS register + * @param __INSTANCE__ CRS Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_CRS_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in CRS register + * @param __INSTANCE__ CRS Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_CRS_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup CRS_LL_EM_Exported_Macros_Calculate_Reload Exported_Macros_Calculate_Reload + * @{ + */ + +/** + * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies + * @note The RELOAD value should be selected according to the ratio between + * the target frequency and the frequency of the synchronization source after + * prescaling. It is then decreased by one in order to reach the expected + * synchronization on the zero value. The formula is the following: + * RELOAD = (fTARGET / fSYNC) -1 + * @param __FTARGET__ Target frequency (value in Hz) + * @param __FSYNC__ Synchronization signal frequency (value in Hz) + * @retval Reload value (in Hz) + */ +#define __LL_CRS_CALC_CALCULATE_RELOADVALUE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRS_LL_Exported_Functions CRS Exported Functions + * @{ + */ + +/** @defgroup CRS_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable Frequency error counter + * @note When this bit is set, the CRS_CFGR register is write-protected and cannot be modified + * @rmtoll CR CEN LL_CRS_EnableFreqErrorCounter + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableFreqErrorCounter(void) +{ + SET_BIT(CRS->CR, CRS_CR_CEN); +} + +/** + * @brief Disable Frequency error counter + * @rmtoll CR CEN LL_CRS_DisableFreqErrorCounter + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableFreqErrorCounter(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_CEN); +} + +/** + * @brief Check if Frequency error counter is enabled or not + * @rmtoll CR CEN LL_CRS_IsEnabledFreqErrorCounter + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledFreqErrorCounter(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_CEN) == (CRS_CR_CEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable Automatic trimming counter + * @rmtoll CR AUTOTRIMEN LL_CRS_EnableAutoTrimming + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableAutoTrimming(void) +{ + SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN); +} + +/** + * @brief Disable Automatic trimming counter + * @rmtoll CR AUTOTRIMEN LL_CRS_DisableAutoTrimming + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableAutoTrimming(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN); +} + +/** + * @brief Check if Automatic trimming is enabled or not + * @rmtoll CR AUTOTRIMEN LL_CRS_IsEnabledAutoTrimming + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledAutoTrimming(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) == (CRS_CR_AUTOTRIMEN)) ? 1UL : 0UL); +} + +/** + * @brief Set HSI48 oscillator smooth trimming + * @note When the AUTOTRIMEN bit is set, this field is controlled by hardware and is read-only + * @rmtoll CR TRIM LL_CRS_SetHSI48SmoothTrimming + * @param Value a number between Min_Data = 0 and Max_Data = 127 + * @note Default value can be set thanks to @ref LL_CRS_HSI48CALIBRATION_DEFAULT + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetHSI48SmoothTrimming(uint32_t Value) +{ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, Value << CRS_CR_TRIM_Pos); +} + +/** + * @brief Get HSI48 oscillator smooth trimming + * @rmtoll CR TRIM LL_CRS_GetHSI48SmoothTrimming + * @retval a number between Min_Data = 0 and Max_Data = 127 + */ +__STATIC_INLINE uint32_t LL_CRS_GetHSI48SmoothTrimming(void) +{ + return (uint32_t)(READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos); +} + +/** + * @brief Set counter reload value + * @rmtoll CFGR RELOAD LL_CRS_SetReloadCounter + * @param Value a number between Min_Data = 0 and Max_Data = 0xFFFF + * @note Default value can be set thanks to @ref LL_CRS_RELOADVALUE_DEFAULT + * Otherwise it can be calculated in using macro @ref __LL_CRS_CALC_CALCULATE_RELOADVALUE (_FTARGET_, _FSYNC_) + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetReloadCounter(uint32_t Value) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_RELOAD, Value); +} + +/** + * @brief Get counter reload value + * @rmtoll CFGR RELOAD LL_CRS_GetReloadCounter + * @retval a number between Min_Data = 0 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_CRS_GetReloadCounter(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD)); +} + +/** + * @brief Set frequency error limit + * @rmtoll CFGR FELIM LL_CRS_SetFreqErrorLimit + * @param Value a number between Min_Data = 0 and Max_Data = 255 + * @note Default value can be set thanks to @ref LL_CRS_ERRORLIMIT_DEFAULT + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetFreqErrorLimit(uint32_t Value) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_FELIM, Value << CRS_CFGR_FELIM_Pos); +} + +/** + * @brief Get frequency error limit + * @rmtoll CFGR FELIM LL_CRS_GetFreqErrorLimit + * @retval A number between Min_Data = 0 and Max_Data = 255 + */ +__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorLimit(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_FELIM) >> CRS_CFGR_FELIM_Pos); +} + +/** + * @brief Set division factor for SYNC signal + * @rmtoll CFGR SYNCDIV LL_CRS_SetSyncDivider + * @param Divider This parameter can be one of the following values: + * @arg @ref LL_CRS_SYNC_DIV_1 + * @arg @ref LL_CRS_SYNC_DIV_2 + * @arg @ref LL_CRS_SYNC_DIV_4 + * @arg @ref LL_CRS_SYNC_DIV_8 + * @arg @ref LL_CRS_SYNC_DIV_16 + * @arg @ref LL_CRS_SYNC_DIV_32 + * @arg @ref LL_CRS_SYNC_DIV_64 + * @arg @ref LL_CRS_SYNC_DIV_128 + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetSyncDivider(uint32_t Divider) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCDIV, Divider); +} + +/** + * @brief Get division factor for SYNC signal + * @rmtoll CFGR SYNCDIV LL_CRS_GetSyncDivider + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_SYNC_DIV_1 + * @arg @ref LL_CRS_SYNC_DIV_2 + * @arg @ref LL_CRS_SYNC_DIV_4 + * @arg @ref LL_CRS_SYNC_DIV_8 + * @arg @ref LL_CRS_SYNC_DIV_16 + * @arg @ref LL_CRS_SYNC_DIV_32 + * @arg @ref LL_CRS_SYNC_DIV_64 + * @arg @ref LL_CRS_SYNC_DIV_128 + */ +__STATIC_INLINE uint32_t LL_CRS_GetSyncDivider(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCDIV)); +} + +/** + * @brief Set SYNC signal source + * @rmtoll CFGR SYNCSRC LL_CRS_SetSyncSignalSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_CRS_SYNC_SOURCE_GPIO + * @arg @ref LL_CRS_SYNC_SOURCE_LSE + * @arg @ref LL_CRS_SYNC_SOURCE_USB + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetSyncSignalSource(uint32_t Source) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCSRC, Source); +} + +/** + * @brief Get SYNC signal source + * @rmtoll CFGR SYNCSRC LL_CRS_GetSyncSignalSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_SYNC_SOURCE_GPIO + * @arg @ref LL_CRS_SYNC_SOURCE_LSE + * @arg @ref LL_CRS_SYNC_SOURCE_USB + */ +__STATIC_INLINE uint32_t LL_CRS_GetSyncSignalSource(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCSRC)); +} + +/** + * @brief Set input polarity for the SYNC signal source + * @rmtoll CFGR SYNCPOL LL_CRS_SetSyncPolarity + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_CRS_SYNC_POLARITY_RISING + * @arg @ref LL_CRS_SYNC_POLARITY_FALLING + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetSyncPolarity(uint32_t Polarity) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCPOL, Polarity); +} + +/** + * @brief Get input polarity for the SYNC signal source + * @rmtoll CFGR SYNCPOL LL_CRS_GetSyncPolarity + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_SYNC_POLARITY_RISING + * @arg @ref LL_CRS_SYNC_POLARITY_FALLING + */ +__STATIC_INLINE uint32_t LL_CRS_GetSyncPolarity(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCPOL)); +} + +/** + * @brief Configure CRS for the synchronization + * @rmtoll CR TRIM LL_CRS_ConfigSynchronization\n + * CFGR RELOAD LL_CRS_ConfigSynchronization\n + * CFGR FELIM LL_CRS_ConfigSynchronization\n + * CFGR SYNCDIV LL_CRS_ConfigSynchronization\n + * CFGR SYNCSRC LL_CRS_ConfigSynchronization\n + * CFGR SYNCPOL LL_CRS_ConfigSynchronization + * @param HSI48CalibrationValue a number between Min_Data = 0 and Max_Data = 127 + * @param ErrorLimitValue a number between Min_Data = 0 and Max_Data = 0xFFFF + * @param ReloadValue a number between Min_Data = 0 and Max_Data = 255 + * @param Settings This parameter can be a combination of the following values: + * @arg @ref LL_CRS_SYNC_DIV_1 or @ref LL_CRS_SYNC_DIV_2 or @ref LL_CRS_SYNC_DIV_4 or @ref LL_CRS_SYNC_DIV_8 + * or @ref LL_CRS_SYNC_DIV_16 or @ref LL_CRS_SYNC_DIV_32 or @ref LL_CRS_SYNC_DIV_64 or @ref LL_CRS_SYNC_DIV_128 + * @arg @ref LL_CRS_SYNC_SOURCE_GPIO or @ref LL_CRS_SYNC_SOURCE_LSE or @ref LL_CRS_SYNC_SOURCE_USB + * @arg @ref LL_CRS_SYNC_POLARITY_RISING or @ref LL_CRS_SYNC_POLARITY_FALLING + * @retval None + */ +__STATIC_INLINE void LL_CRS_ConfigSynchronization(uint32_t HSI48CalibrationValue, uint32_t ErrorLimitValue, uint32_t ReloadValue, uint32_t Settings) +{ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, HSI48CalibrationValue); + MODIFY_REG(CRS->CFGR, + CRS_CFGR_RELOAD | CRS_CFGR_FELIM | CRS_CFGR_SYNCDIV | CRS_CFGR_SYNCSRC | CRS_CFGR_SYNCPOL, + ReloadValue | (ErrorLimitValue << CRS_CFGR_FELIM_Pos) | Settings); +} + +/** + * @} + */ + +/** @defgroup CRS_LL_EF_CRS_Management CRS_Management + * @{ + */ + +/** + * @brief Generate software SYNC event + * @rmtoll CR SWSYNC LL_CRS_GenerateEvent_SWSYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_GenerateEvent_SWSYNC(void) +{ + SET_BIT(CRS->CR, CRS_CR_SWSYNC); +} + +/** + * @brief Get the frequency error direction latched in the time of the last + * SYNC event + * @rmtoll ISR FEDIR LL_CRS_GetFreqErrorDirection + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_FREQ_ERROR_DIR_UP + * @arg @ref LL_CRS_FREQ_ERROR_DIR_DOWN + */ +__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorDirection(void) +{ + return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FEDIR)); +} + +/** + * @brief Get the frequency error counter value latched in the time of the last SYNC event + * @rmtoll ISR FECAP LL_CRS_GetFreqErrorCapture + * @retval A number between Min_Data = 0x0000 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorCapture(void) +{ + return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos); +} + +/** + * @} + */ + +/** @defgroup CRS_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if SYNC event OK signal occurred or not + * @rmtoll ISR SYNCOKF LL_CRS_IsActiveFlag_SYNCOK + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCOK(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_SYNCOKF) == (CRS_ISR_SYNCOKF)) ? 1UL : 0UL); +} + +/** + * @brief Check if SYNC warning signal occurred or not + * @rmtoll ISR SYNCWARNF LL_CRS_IsActiveFlag_SYNCWARN + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCWARN(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_SYNCWARNF) == (CRS_ISR_SYNCWARNF)) ? 1UL : 0UL); +} + +/** + * @brief Check if Synchronization or trimming error signal occurred or not + * @rmtoll ISR ERRF LL_CRS_IsActiveFlag_ERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ERR(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_ERRF) == (CRS_ISR_ERRF)) ? 1UL : 0UL); +} + +/** + * @brief Check if Expected SYNC signal occurred or not + * @rmtoll ISR ESYNCF LL_CRS_IsActiveFlag_ESYNC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ESYNC(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_ESYNCF) == (CRS_ISR_ESYNCF)) ? 1UL : 0UL); +} + +/** + * @brief Check if SYNC error signal occurred or not + * @rmtoll ISR SYNCERR LL_CRS_IsActiveFlag_SYNCERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCERR(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_SYNCERR) == (CRS_ISR_SYNCERR)) ? 1UL : 0UL); +} + +/** + * @brief Check if SYNC missed error signal occurred or not + * @rmtoll ISR SYNCMISS LL_CRS_IsActiveFlag_SYNCMISS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCMISS(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_SYNCMISS) == (CRS_ISR_SYNCMISS)) ? 1UL : 0UL); +} + +/** + * @brief Check if Trimming overflow or underflow occurred or not + * @rmtoll ISR TRIMOVF LL_CRS_IsActiveFlag_TRIMOVF + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_TRIMOVF(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_TRIMOVF) == (CRS_ISR_TRIMOVF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the SYNC event OK flag + * @rmtoll ICR SYNCOKC LL_CRS_ClearFlag_SYNCOK + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_SYNCOK(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC); +} + +/** + * @brief Clear the SYNC warning flag + * @rmtoll ICR SYNCWARNC LL_CRS_ClearFlag_SYNCWARN + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_SYNCWARN(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC); +} + +/** + * @brief Clear TRIMOVF, SYNCMISS and SYNCERR bits and consequently also + * the ERR flag + * @rmtoll ICR ERRC LL_CRS_ClearFlag_ERR + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_ERR(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC); +} + +/** + * @brief Clear Expected SYNC flag + * @rmtoll ICR ESYNCC LL_CRS_ClearFlag_ESYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_ESYNC(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC); +} + +/** + * @} + */ + +/** @defgroup CRS_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable SYNC event OK interrupt + * @rmtoll CR SYNCOKIE LL_CRS_EnableIT_SYNCOK + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_SYNCOK(void) +{ + SET_BIT(CRS->CR, CRS_CR_SYNCOKIE); +} + +/** + * @brief Disable SYNC event OK interrupt + * @rmtoll CR SYNCOKIE LL_CRS_DisableIT_SYNCOK + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_SYNCOK(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_SYNCOKIE); +} + +/** + * @brief Check if SYNC event OK interrupt is enabled or not + * @rmtoll CR SYNCOKIE LL_CRS_IsEnabledIT_SYNCOK + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCOK(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_SYNCOKIE) == (CRS_CR_SYNCOKIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable SYNC warning interrupt + * @rmtoll CR SYNCWARNIE LL_CRS_EnableIT_SYNCWARN + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_SYNCWARN(void) +{ + SET_BIT(CRS->CR, CRS_CR_SYNCWARNIE); +} + +/** + * @brief Disable SYNC warning interrupt + * @rmtoll CR SYNCWARNIE LL_CRS_DisableIT_SYNCWARN + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_SYNCWARN(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_SYNCWARNIE); +} + +/** + * @brief Check if SYNC warning interrupt is enabled or not + * @rmtoll CR SYNCWARNIE LL_CRS_IsEnabledIT_SYNCWARN + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCWARN(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_SYNCWARNIE) == (CRS_CR_SYNCWARNIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Synchronization or trimming error interrupt + * @rmtoll CR ERRIE LL_CRS_EnableIT_ERR + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_ERR(void) +{ + SET_BIT(CRS->CR, CRS_CR_ERRIE); +} + +/** + * @brief Disable Synchronization or trimming error interrupt + * @rmtoll CR ERRIE LL_CRS_DisableIT_ERR + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_ERR(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_ERRIE); +} + +/** + * @brief Check if Synchronization or trimming error interrupt is enabled or not + * @rmtoll CR ERRIE LL_CRS_IsEnabledIT_ERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ERR(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_ERRIE) == (CRS_CR_ERRIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Expected SYNC interrupt + * @rmtoll CR ESYNCIE LL_CRS_EnableIT_ESYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_ESYNC(void) +{ + SET_BIT(CRS->CR, CRS_CR_ESYNCIE); +} + +/** + * @brief Disable Expected SYNC interrupt + * @rmtoll CR ESYNCIE LL_CRS_DisableIT_ESYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_ESYNC(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_ESYNCIE); +} + +/** + * @brief Check if Expected SYNC interrupt is enabled or not + * @rmtoll CR ESYNCIE LL_CRS_IsEnabledIT_ESYNC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ESYNC(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_ESYNCIE) == (CRS_CR_ESYNCIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup CRS_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_CRS_DeInit(void); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(CRS) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_CRS_H */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dma.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dma.h new file mode 100644 index 0000000..57db1bc --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dma.h @@ -0,0 +1,2270 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_dma.h + * @author MCD Application Team + * @brief Header file of DMA LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_DMA_H +#define STM32G0xx_LL_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" +#include "stm32g0xx_ll_dmamux.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (DMA1) || defined (DMA2) + +/** @defgroup DMA_LL DMA + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup DMA_LL_Private_Variables DMA Private Variables + * @{ + */ +/* Array used to get the DMA channel register offset versus channel index LL_DMA_CHANNEL_x */ +static const uint8_t CHANNEL_OFFSET_TAB[] = +{ + (uint8_t)(DMA1_Channel1_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel2_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel3_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel4_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel5_BASE - DMA1_BASE), +#if defined(DMA1_Channel6_BASE) + (uint8_t)(DMA1_Channel6_BASE - DMA1_BASE), +#endif /* DMA1_Channel6_BASE */ +#if defined(DMA1_Channel7_BASE) + (uint8_t)(DMA1_Channel7_BASE - DMA1_BASE), +#endif /* DMA1_Channel7_BASE */ +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/** @defgroup DMA_LL_Private_Macros DMA Private Macros + * @{ + */ +/** + * @brief Helper macro to convert DMA Instance DMAx into DMAMUX channel + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @param __DMA_INSTANCE__ DMAx + * @retval Channel_Offset (LL_DMA_CHANNEL_7 or 0). + */ +#define __LL_DMA_INSTANCE_TO_DMAMUX_CHANNEL(__DMA_INSTANCE__) \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) ? 0 : LL_DMA_CHANNEL_7) +/** + * @} + */ +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure + * @{ + */ +typedef struct +{ + uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer + or as Source base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer + or as Destination base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_LL_EC_DIRECTION + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */ + + uint32_t Mode; /*!< Specifies the normal or circular operation mode. + This parameter can be a value of @ref DMA_LL_EC_MODE + @note: The circular buffer mode cannot be used if the memory to memory + data transfer direction is configured on the selected Channel + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */ + + uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_PERIPH + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */ + + uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_MEMORY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */ + + uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */ + + uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */ + + uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit. + The data unit is equal to the source buffer configuration set in PeripheralSize + or MemorySize parameters depending in the transfer direction. + This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */ + + uint32_t PeriphRequest; /*!< Specifies the peripheral request. + This parameter can be a value of @ref DMAMUX_LL_EC_REQUEST + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphRequest(). */ + + uint32_t Priority; /*!< Specifies the channel priority level. + This parameter can be a value of @ref DMA_LL_EC_PRIORITY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetChannelPriorityLevel(). */ + +} LL_DMA_InitTypeDef; +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants + * @{ + */ +/** @defgroup DMA_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_DMA_WriteReg function + * @{ + */ +#define LL_DMA_IFCR_CGIF1 DMA_IFCR_CGIF1 /*!< Channel 1 global flag */ +#define LL_DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1 /*!< Channel 1 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1 /*!< Channel 1 half transfer flag */ +#define LL_DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1 /*!< Channel 1 transfer error flag */ +#define LL_DMA_IFCR_CGIF2 DMA_IFCR_CGIF2 /*!< Channel 2 global flag */ +#define LL_DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2 /*!< Channel 2 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2 /*!< Channel 2 half transfer flag */ +#define LL_DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2 /*!< Channel 2 transfer error flag */ +#define LL_DMA_IFCR_CGIF3 DMA_IFCR_CGIF3 /*!< Channel 3 global flag */ +#define LL_DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3 /*!< Channel 3 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3 /*!< Channel 3 half transfer flag */ +#define LL_DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3 /*!< Channel 3 transfer error flag */ +#define LL_DMA_IFCR_CGIF4 DMA_IFCR_CGIF4 /*!< Channel 4 global flag */ +#define LL_DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4 /*!< Channel 4 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4 /*!< Channel 4 half transfer flag */ +#define LL_DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4 /*!< Channel 4 transfer error flag */ +#define LL_DMA_IFCR_CGIF5 DMA_IFCR_CGIF5 /*!< Channel 5 global flag */ +#define LL_DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5 /*!< Channel 5 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5 /*!< Channel 5 half transfer flag */ +#define LL_DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5 /*!< Channel 5 transfer error flag */ +#if defined(DMA1_Channel6) +#define LL_DMA_IFCR_CGIF6 DMA_IFCR_CGIF6 /*!< Channel 6 global flag */ +#define LL_DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6 /*!< Channel 6 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6 /*!< Channel 6 half transfer flag */ +#define LL_DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6 /*!< Channel 6 transfer error flag */ +#endif /* DMA1_Channel6 */ +#if defined(DMA1_Channel7) +#define LL_DMA_IFCR_CGIF7 DMA_IFCR_CGIF7 /*!< Channel 7 global flag */ +#define LL_DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7 /*!< Channel 7 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7 /*!< Channel 7 half transfer flag */ +#define LL_DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7 /*!< Channel 7 transfer error flag */ +#endif /* DMA1_Channel7 */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_DMA_ReadReg function + * @{ + */ +#define LL_DMA_ISR_GIF1 DMA_ISR_GIF1 /*!< Channel 1 global flag */ +#define LL_DMA_ISR_TCIF1 DMA_ISR_TCIF1 /*!< Channel 1 transfer complete flag */ +#define LL_DMA_ISR_HTIF1 DMA_ISR_HTIF1 /*!< Channel 1 half transfer flag */ +#define LL_DMA_ISR_TEIF1 DMA_ISR_TEIF1 /*!< Channel 1 transfer error flag */ +#define LL_DMA_ISR_GIF2 DMA_ISR_GIF2 /*!< Channel 2 global flag */ +#define LL_DMA_ISR_TCIF2 DMA_ISR_TCIF2 /*!< Channel 2 transfer complete flag */ +#define LL_DMA_ISR_HTIF2 DMA_ISR_HTIF2 /*!< Channel 2 half transfer flag */ +#define LL_DMA_ISR_TEIF2 DMA_ISR_TEIF2 /*!< Channel 2 transfer error flag */ +#define LL_DMA_ISR_GIF3 DMA_ISR_GIF3 /*!< Channel 3 global flag */ +#define LL_DMA_ISR_TCIF3 DMA_ISR_TCIF3 /*!< Channel 3 transfer complete flag */ +#define LL_DMA_ISR_HTIF3 DMA_ISR_HTIF3 /*!< Channel 3 half transfer flag */ +#define LL_DMA_ISR_TEIF3 DMA_ISR_TEIF3 /*!< Channel 3 transfer error flag */ +#define LL_DMA_ISR_GIF4 DMA_ISR_GIF4 /*!< Channel 4 global flag */ +#define LL_DMA_ISR_TCIF4 DMA_ISR_TCIF4 /*!< Channel 4 transfer complete flag */ +#define LL_DMA_ISR_HTIF4 DMA_ISR_HTIF4 /*!< Channel 4 half transfer flag */ +#define LL_DMA_ISR_TEIF4 DMA_ISR_TEIF4 /*!< Channel 4 transfer error flag */ +#define LL_DMA_ISR_GIF5 DMA_ISR_GIF5 /*!< Channel 5 global flag */ +#define LL_DMA_ISR_TCIF5 DMA_ISR_TCIF5 /*!< Channel 5 transfer complete flag */ +#define LL_DMA_ISR_HTIF5 DMA_ISR_HTIF5 /*!< Channel 5 half transfer flag */ +#define LL_DMA_ISR_TEIF5 DMA_ISR_TEIF5 /*!< Channel 5 transfer error flag */ +#if defined(DMA1_Channel6) +#define LL_DMA_ISR_GIF6 DMA_ISR_GIF6 /*!< Channel 6 global flag */ +#define LL_DMA_ISR_TCIF6 DMA_ISR_TCIF6 /*!< Channel 6 transfer complete flag */ +#define LL_DMA_ISR_HTIF6 DMA_ISR_HTIF6 /*!< Channel 6 half transfer flag */ +#define LL_DMA_ISR_TEIF6 DMA_ISR_TEIF6 /*!< Channel 6 transfer error flag */ +#endif /* DMA1_Channel6 */ +#if defined(DMA1_Channel7) +#define LL_DMA_ISR_GIF7 DMA_ISR_GIF7 /*!< Channel 7 global flag */ +#define LL_DMA_ISR_TCIF7 DMA_ISR_TCIF7 /*!< Channel 7 transfer complete flag */ +#define LL_DMA_ISR_HTIF7 DMA_ISR_HTIF7 /*!< Channel 7 half transfer flag */ +#define LL_DMA_ISR_TEIF7 DMA_ISR_TEIF7 /*!< Channel 7 transfer error flag */ +#endif /* DMA1_Channel7 */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMA_WriteReg functions + * @{ + */ +#define LL_DMA_CCR_TCIE DMA_CCR_TCIE /*!< Transfer complete interrupt */ +#define LL_DMA_CCR_HTIE DMA_CCR_HTIE /*!< Half Transfer interrupt */ +#define LL_DMA_CCR_TEIE DMA_CCR_TEIE /*!< Transfer error interrupt */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_CHANNEL CHANNEL + * @{ + */ +#define LL_DMA_CHANNEL_1 0x00000000U /*!< DMA Channel 1 */ +#define LL_DMA_CHANNEL_2 0x00000001U /*!< DMA Channel 2 */ +#define LL_DMA_CHANNEL_3 0x00000002U /*!< DMA Channel 3 */ +#define LL_DMA_CHANNEL_4 0x00000003U /*!< DMA Channel 4 */ +#define LL_DMA_CHANNEL_5 0x00000004U /*!< DMA Channel 5 */ +#if defined(DMA1_Channel6) +#define LL_DMA_CHANNEL_6 0x00000005U /*!< DMA Channel 6 */ +#endif /* DMA1_Channel6 */ +#if defined(DMA1_Channel7) +#define LL_DMA_CHANNEL_7 0x00000006U /*!< DMA Channel 7 */ +#endif /* DMA1_Channel7 */ +#if defined(USE_FULL_LL_DRIVER) +#define LL_DMA_CHANNEL_ALL 0xFFFF0000U /*!< DMA Channel all (used only for function @ref LL_DMA_DeInit(). */ +#endif /*USE_FULL_LL_DRIVER*/ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_DIRECTION Transfer Direction + * @{ + */ +#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_CCR_DIR /*!< Memory to peripheral direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_CCR_MEM2MEM /*!< Memory to memory direction */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MODE Transfer mode + * @{ + */ +#define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */ +#define LL_DMA_MODE_CIRCULAR DMA_CCR_CIRC /*!< Circular Mode */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PERIPH Peripheral increment mode + * @{ + */ +#define LL_DMA_PERIPH_INCREMENT DMA_CCR_PINC /*!< Peripheral increment mode Enable */ +#define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MEMORY Memory increment mode + * @{ + */ +#define LL_DMA_MEMORY_INCREMENT DMA_CCR_MINC /*!< Memory increment mode Enable */ +#define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PDATAALIGN Peripheral data alignment + * @{ + */ +#define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */ +#define LL_DMA_PDATAALIGN_HALFWORD DMA_CCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */ +#define LL_DMA_PDATAALIGN_WORD DMA_CCR_PSIZE_1 /*!< Peripheral data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MDATAALIGN Memory data alignment + * @{ + */ +#define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */ +#define LL_DMA_MDATAALIGN_HALFWORD DMA_CCR_MSIZE_0 /*!< Memory data alignment : HalfWord */ +#define LL_DMA_MDATAALIGN_WORD DMA_CCR_MSIZE_1 /*!< Memory data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PRIORITY Transfer Priority level + * @{ + */ +#define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ +#define LL_DMA_PRIORITY_MEDIUM DMA_CCR_PL_0 /*!< Priority level : Medium */ +#define LL_DMA_PRIORITY_HIGH DMA_CCR_PL_1 /*!< Priority level : High */ +#define LL_DMA_PRIORITY_VERYHIGH DMA_CCR_PL /*!< Priority level : Very_High */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxChannely + * @{ + */ +/** + * @brief Convert DMAx_Channely into DMAx + * @param __CHANNEL_INSTANCE__ DMAx_Channely + * @retval DMAx + */ +#if defined(DMA2) +#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) \ + (((uint32_t)(__CHANNEL_INSTANCE__) > ((uint32_t)DMA1_Channel7)) ? DMA2 : DMA1) +#else /* DMA1 */ +#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) (DMA1) +#endif /* DMA2 */ + +/** + * @brief Convert DMAx_Channely into LL_DMA_CHANNEL_y + * @param __CHANNEL_INSTANCE__ DMAx_Channely + * @retval LL_DMA_CHANNEL_y + */ +#if defined(DMA2) +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ + (((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \ + LL_DMA_CHANNEL_7) +#else /* DMA1 */ +#if defined(DMA1_Channel7) +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ + (((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \ + LL_DMA_CHANNEL_7) +#else +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ + (((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + LL_DMA_CHANNEL_5) +#endif /* DMA1_Channel8 */ +#endif /* DMA2 */ + +/** + * @brief Convert DMA Instance DMAx and LL_DMA_CHANNEL_y into DMAx_Channely + * @param __DMA_INSTANCE__ DMAx + * @param __CHANNEL__ LL_DMA_CHANNEL_y + * @retval DMAx_Channely + */ +#if defined(DMA2) +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ + ((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \ + DMA1_Channel7) +#else /* DMA1 */ +#if defined(DMA1_Channel7) +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ + ((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \ + DMA1_Channel7) +#else +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ + ((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + DMA1_Channel5) +#endif /* DMA1_Channel8 */ +#endif /* DMA2 */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Enable DMA channel. + * @rmtoll CCR EN LL_DMA_EnableChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableChannel(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_EN); +} + +/** + * @brief Disable DMA channel. + * @rmtoll CCR EN LL_DMA_DisableChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableChannel(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_EN); +} + +/** + * @brief Check if DMA channel is enabled or disabled. + * @rmtoll CCR EN LL_DMA_IsEnabledChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledChannel(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_EN) == (DMA_CCR_EN)) ? 1UL : 0UL); +} + +/** + * @brief Configure all parameters link to DMA transfer. + * @rmtoll CCR DIR LL_DMA_ConfigTransfer\n + * CCR MEM2MEM LL_DMA_ConfigTransfer\n + * CCR CIRC LL_DMA_ConfigTransfer\n + * CCR PINC LL_DMA_ConfigTransfer\n + * CCR MINC LL_DMA_ConfigTransfer\n + * CCR PSIZE LL_DMA_ConfigTransfer\n + * CCR MSIZE LL_DMA_ConfigTransfer\n + * CCR PL LL_DMA_ConfigTransfer + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR + * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT + * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT + * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD + * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD + * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigTransfer(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Configuration) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM | DMA_CCR_CIRC | DMA_CCR_PINC | DMA_CCR_MINC | DMA_CCR_PSIZE | DMA_CCR_MSIZE | DMA_CCR_PL, + Configuration); +} + +/** + * @brief Set Data transfer direction (read from peripheral or from memory). + * @rmtoll CCR DIR LL_DMA_SetDataTransferDirection\n + * CCR MEM2MEM LL_DMA_SetDataTransferDirection + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataTransferDirection(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Direction) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM, Direction); +} + +/** + * @brief Get Data transfer direction (read from peripheral or from memory). + * @rmtoll CCR DIR LL_DMA_GetDataTransferDirection\n + * CCR MEM2MEM LL_DMA_GetDataTransferDirection + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM)); +} + +/** + * @brief Set DMA mode circular or normal. + * @note The circular buffer mode cannot be used if the memory-to-memory + * data transfer is configured on the selected Channel. + * @rmtoll CCR CIRC LL_DMA_SetMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMode(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Mode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_CIRC, + Mode); +} + +/** + * @brief Get DMA mode circular or normal. + * @rmtoll CCR CIRC LL_DMA_GetMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + */ +__STATIC_INLINE uint32_t LL_DMA_GetMode(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_CIRC)); +} + +/** + * @brief Set Peripheral increment mode. + * @rmtoll CCR PINC LL_DMA_SetPeriphIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphOrM2MSrcIncMode This parameter can be one of the following values: + * @arg @ref LL_DMA_PERIPH_INCREMENT + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphIncMode(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcIncMode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_PINC, + PeriphOrM2MSrcIncMode); +} + +/** + * @brief Get Peripheral increment mode. + * @rmtoll CCR PINC LL_DMA_GetPeriphIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PERIPH_INCREMENT + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_PINC)); +} + +/** + * @brief Set Memory increment mode. + * @rmtoll CCR MINC LL_DMA_SetMemoryIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryOrM2MDstIncMode This parameter can be one of the following values: + * @arg @ref LL_DMA_MEMORY_INCREMENT + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryIncMode(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstIncMode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_MINC, + MemoryOrM2MDstIncMode); +} + +/** + * @brief Get Memory increment mode. + * @rmtoll CCR MINC LL_DMA_GetMemoryIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MEMORY_INCREMENT + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_MINC)); +} + +/** + * @brief Set Peripheral size. + * @rmtoll CCR PSIZE LL_DMA_SetPeriphSize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphOrM2MSrcDataSize This parameter can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphSize(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcDataSize) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_PSIZE, + PeriphOrM2MSrcDataSize); +} + +/** + * @brief Get Peripheral size. + * @rmtoll CCR PSIZE LL_DMA_GetPeriphSize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_PSIZE)); +} + +/** + * @brief Set Memory size. + * @rmtoll CCR MSIZE LL_DMA_SetMemorySize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryOrM2MDstDataSize This parameter can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemorySize(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstDataSize) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_MSIZE, + MemoryOrM2MDstDataSize); +} + +/** + * @brief Get Memory size. + * @rmtoll CCR MSIZE LL_DMA_GetMemorySize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_MSIZE)); +} + +/** + * @brief Set Channel priority level. + * @rmtoll CCR PL LL_DMA_SetChannelPriorityLevel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Priority This parameter can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetChannelPriorityLevel(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Priority) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_PL, + Priority); +} + +/** + * @brief Get Channel priority level. + * @rmtoll CCR PL LL_DMA_GetChannelPriorityLevel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + */ +__STATIC_INLINE uint32_t LL_DMA_GetChannelPriorityLevel(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_PL)); +} + +/** + * @brief Set Number of data to transfer. + * @note This action has no effect if + * channel is enabled. + * @rmtoll CNDTR NDT LL_DMA_SetDataLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param NbData Between Min_Data = 0 and Max_Data = 0x0000FFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataLength(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t NbData) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CNDTR, + DMA_CNDTR_NDT, NbData); +} + +/** + * @brief Get Number of data to transfer. + * @note Once the channel is enabled, the return value indicate the + * remaining bytes to be transmitted. + * @rmtoll CNDTR NDT LL_DMA_GetDataLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataLength(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CNDTR, + DMA_CNDTR_NDT)); +} + +/** + * @brief Configure the Source and Destination addresses. + * @note This API must not be called when the DMA channel is enabled. + * @note Each peripheral using DMA provides an API to get directly the register address (LL_PPP_DMA_GetRegAddr). + * @rmtoll CPAR PA LL_DMA_ConfigAddresses\n + * CMAR MA LL_DMA_ConfigAddresses + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param SrcAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @param DstAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigAddresses(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAddress, + uint32_t DstAddress, uint32_t Direction) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + /* Direction Memory to Periph */ + if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) + { + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR, SrcAddress); + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR, DstAddress); + } + /* Direction Periph to Memory and Memory to Memory */ + else + { + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR, SrcAddress); + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR, DstAddress); + } +} + +/** + * @brief Set the Memory address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CMAR MA LL_DMA_SetMemoryAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryAddress(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR, MemoryAddress); +} + +/** + * @brief Set the Peripheral address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CPAR PA LL_DMA_SetPeriphAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphAddress(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR, PeriphAddress); +} + +/** + * @brief Get Memory address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @rmtoll CMAR MA LL_DMA_GetMemoryAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR)); +} + +/** + * @brief Get Peripheral address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @rmtoll CPAR PA LL_DMA_GetPeriphAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR)); +} + +/** + * @brief Set the Memory to Memory Source address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CPAR PA LL_DMA_SetM2MSrcAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR, MemoryAddress); +} + +/** + * @brief Set the Memory to Memory Destination address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CMAR MA LL_DMA_SetM2MDstAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MDstAddress(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR, MemoryAddress); +} + +/** + * @brief Get the Memory to Memory Source address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @rmtoll CPAR PA LL_DMA_GetM2MSrcAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR)); +} + +/** + * @brief Get the Memory to Memory Destination address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @rmtoll CMAR MA LL_DMA_GetM2MDstAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR)); +} + +/** + * @brief Set DMA request for DMA Channels on DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR DMAREQ_ID LL_DMA_SetPeriphRequest + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Request This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX_REQ_ADC1 + * @arg @ref LL_DMAMUX_REQ_AES_IN + * @arg @ref LL_DMAMUX_REQ_AES_OUT + * @arg @ref LL_DMAMUX_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_I2C2_RX + * @arg @ref LL_DMAMUX_REQ_I2C2_TX + * @arg @ref LL_DMAMUX_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_SPI2_RX + * @arg @ref LL_DMAMUX_REQ_SPI2_TX + * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM1_UP + * @arg @ref LL_DMAMUX_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM2_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM2_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM3_UP + * @arg @ref LL_DMAMUX_REQ_TIM6_UP + * @arg @ref LL_DMAMUX_REQ_TIM7_UP + * @arg @ref LL_DMAMUX_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM15_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM15_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM15_UP + * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM16_COM + * @arg @ref LL_DMAMUX_REQ_TIM16_UP + * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM17_COM + * @arg @ref LL_DMAMUX_REQ_TIM17_UP + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_USART2_RX + * @arg @ref LL_DMAMUX_REQ_USART2_TX + * @arg @ref LL_DMAMUX_REQ_USART3_RX + * @arg @ref LL_DMAMUX_REQ_USART3_TX + * @arg @ref LL_DMAMUX_REQ_USART4_RX + * @arg @ref LL_DMAMUX_REQ_USART4_TX + * @arg @ref LL_DMAMUX_REQ_UCPD1_RX + * @arg @ref LL_DMAMUX_REQ_UCPD1_TX + * @arg @ref LL_DMAMUX_REQ_UCPD2_RX + * @arg @ref LL_DMAMUX_REQ_UCPD2_TX + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphRequest(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Request) +{ + uint32_t dmamux_ccr_offset = ((((uint32_t)DMAx ^ (uint32_t)DMA1) >> 10U) * 7U); + MODIFY_REG((DMAMUX1_Channel0 + Channel + dmamux_ccr_offset)->CCR, DMAMUX_CxCR_DMAREQ_ID, Request); +} + +/** + * @brief Get DMA request for DMA Channels on DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR DMAREQ_ID LL_DMA_GetPeriphRequest + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX_REQ_ADC1 + * @arg @ref LL_DMAMUX_REQ_AES_IN + * @arg @ref LL_DMAMUX_REQ_AES_OUT + * @arg @ref LL_DMAMUX_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_I2C2_RX + * @arg @ref LL_DMAMUX_REQ_I2C2_TX + * @arg @ref LL_DMAMUX_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_SPI2_RX + * @arg @ref LL_DMAMUX_REQ_SPI2_TX + * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM1_UP + * @arg @ref LL_DMAMUX_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM2_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM2_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM3_UP + * @arg @ref LL_DMAMUX_REQ_TIM6_UP + * @arg @ref LL_DMAMUX_REQ_TIM7_UP + * @arg @ref LL_DMAMUX_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM15_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM15_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM15_UP + * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM16_COM + * @arg @ref LL_DMAMUX_REQ_TIM16_UP + * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM17_COM + * @arg @ref LL_DMAMUX_REQ_TIM17_UP + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_USART2_RX + * @arg @ref LL_DMAMUX_REQ_USART2_TX + * @arg @ref LL_DMAMUX_REQ_USART3_RX + * @arg @ref LL_DMAMUX_REQ_USART3_TX + * @arg @ref LL_DMAMUX_REQ_USART4_RX + * @arg @ref LL_DMAMUX_REQ_USART4_TX + * @arg @ref LL_DMAMUX_REQ_UCPD1_RX + * @arg @ref LL_DMAMUX_REQ_UCPD1_TX + * @arg @ref LL_DMAMUX_REQ_UCPD2_RX + * @arg @ref LL_DMAMUX_REQ_UCPD2_TX + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphRequest(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dmamux_ccr_offset = ((((uint32_t)DMAx ^ (uint32_t)DMA1) >> 10U) * 7U); + return (READ_BIT((DMAMUX1_Channel0 + Channel + dmamux_ccr_offset)->CCR, DMAMUX_CxCR_DMAREQ_ID)); +} + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Channel 1 global interrupt flag. + * @rmtoll ISR GIF1 LL_DMA_IsActiveFlag_GI1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI1(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF1) == (DMA_ISR_GIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 global interrupt flag. + * @rmtoll ISR GIF2 LL_DMA_IsActiveFlag_GI2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI2(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF2) == (DMA_ISR_GIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 global interrupt flag. + * @rmtoll ISR GIF3 LL_DMA_IsActiveFlag_GI3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI3(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF3) == (DMA_ISR_GIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 4 global interrupt flag. + * @rmtoll ISR GIF4 LL_DMA_IsActiveFlag_GI4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI4(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF4) == (DMA_ISR_GIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 5 global interrupt flag. + * @rmtoll ISR GIF5 LL_DMA_IsActiveFlag_GI5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI5(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF5) == (DMA_ISR_GIF5)) ? 1UL : 0UL); +} + +#if defined(DMA1_Channel6) +/** + * @brief Get Channel 6 global interrupt flag. + * @rmtoll ISR GIF6 LL_DMA_IsActiveFlag_GI6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI6(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF6) == (DMA_ISR_GIF6)) ? 1UL : 0UL); +} + +#endif /* DMA1_Channel6 */ +#if defined(DMA1_Channel7) +/** + * @brief Get Channel 7 global interrupt flag. + * @rmtoll ISR GIF7 LL_DMA_IsActiveFlag_GI7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI7(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF7) == (DMA_ISR_GIF7)) ? 1UL : 0UL); +} + +#endif /* DMA1_Channel7 */ +/** + * @brief Get Channel 1 transfer complete flag. + * @rmtoll ISR TCIF1 LL_DMA_IsActiveFlag_TC1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF1) == (DMA_ISR_TCIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 transfer complete flag. + * @rmtoll ISR TCIF2 LL_DMA_IsActiveFlag_TC2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF2) == (DMA_ISR_TCIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 transfer complete flag. + * @rmtoll ISR TCIF3 LL_DMA_IsActiveFlag_TC3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF3) == (DMA_ISR_TCIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 4 transfer complete flag. + * @rmtoll ISR TCIF4 LL_DMA_IsActiveFlag_TC4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF4) == (DMA_ISR_TCIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 5 transfer complete flag. + * @rmtoll ISR TCIF5 LL_DMA_IsActiveFlag_TC5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF5) == (DMA_ISR_TCIF5)) ? 1UL : 0UL); +} + +#if defined(DMA1_Channel6) +/** + * @brief Get Channel 6 transfer complete flag. + * @rmtoll ISR TCIF6 LL_DMA_IsActiveFlag_TC6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF6) == (DMA_ISR_TCIF6)) ? 1UL : 0UL); +} + +#endif /* DMA1_Channel6 */ +#if defined(DMA1_Channel7) +/** + * @brief Get Channel 7 transfer complete flag. + * @rmtoll ISR TCIF7 LL_DMA_IsActiveFlag_TC7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF7) == (DMA_ISR_TCIF7)) ? 1UL : 0UL); +} + +#endif /* DMA1_Channel7 */ +/** + * @brief Get Channel 1 half transfer flag. + * @rmtoll ISR HTIF1 LL_DMA_IsActiveFlag_HT1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF1) == (DMA_ISR_HTIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 half transfer flag. + * @rmtoll ISR HTIF2 LL_DMA_IsActiveFlag_HT2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF2) == (DMA_ISR_HTIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 half transfer flag. + * @rmtoll ISR HTIF3 LL_DMA_IsActiveFlag_HT3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF3) == (DMA_ISR_HTIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 4 half transfer flag. + * @rmtoll ISR HTIF4 LL_DMA_IsActiveFlag_HT4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF4) == (DMA_ISR_HTIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 5 half transfer flag. + * @rmtoll ISR HTIF5 LL_DMA_IsActiveFlag_HT5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF5) == (DMA_ISR_HTIF5)) ? 1UL : 0UL); +} + +#if defined(DMA1_Channel6) +/** + * @brief Get Channel 6 half transfer flag. + * @rmtoll ISR HTIF6 LL_DMA_IsActiveFlag_HT6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF6) == (DMA_ISR_HTIF6)) ? 1UL : 0UL); +} + +#endif /* DMA1_Channel6 */ +#if defined(DMA1_Channel7) +/** + * @brief Get Channel 7 half transfer flag. + * @rmtoll ISR HTIF7 LL_DMA_IsActiveFlag_HT7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF7) == (DMA_ISR_HTIF7)) ? 1UL : 0UL); +} + +#endif /* DMA1_Channel7 */ +/** + * @brief Get Channel 1 transfer error flag. + * @rmtoll ISR TEIF1 LL_DMA_IsActiveFlag_TE1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF1) == (DMA_ISR_TEIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 transfer error flag. + * @rmtoll ISR TEIF2 LL_DMA_IsActiveFlag_TE2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF2) == (DMA_ISR_TEIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 transfer error flag. + * @rmtoll ISR TEIF3 LL_DMA_IsActiveFlag_TE3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF3) == (DMA_ISR_TEIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 4 transfer error flag. + * @rmtoll ISR TEIF4 LL_DMA_IsActiveFlag_TE4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF4) == (DMA_ISR_TEIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 5 transfer error flag. + * @rmtoll ISR TEIF5 LL_DMA_IsActiveFlag_TE5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF5) == (DMA_ISR_TEIF5)) ? 1UL : 0UL); +} + +#if defined(DMA1_Channel6) +/** + * @brief Get Channel 6 transfer error flag. + * @rmtoll ISR TEIF6 LL_DMA_IsActiveFlag_TE6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF6) == (DMA_ISR_TEIF6)) ? 1UL : 0UL); +} + +#endif /* DMA1_Channel6 */ +#if defined(DMA1_Channel7) +/** + * @brief Get Channel 7 transfer error flag. + * @rmtoll ISR TEIF7 LL_DMA_IsActiveFlag_TE7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(const DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF7) == (DMA_ISR_TEIF7)) ? 1UL : 0UL); +} + +#endif /* DMA1_Channel7 */ +/** + * @brief Clear Channel 1 global interrupt flag. + * @note Do not Clear Channel 1 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC1, LL_DMA_ClearFlag_HT1, + LL_DMA_ClearFlag_TE1. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF1 LL_DMA_ClearFlag_GI1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF1); +} + +/** + * @brief Clear Channel 2 global interrupt flag. + * @note Do not Clear Channel 2 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC2, LL_DMA_ClearFlag_HT2, + LL_DMA_ClearFlag_TE2. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF2 LL_DMA_ClearFlag_GI2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF2); +} + +/** + * @brief Clear Channel 3 global interrupt flag. + * @note Do not Clear Channel 3 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC3, LL_DMA_ClearFlag_HT3, + LL_DMA_ClearFlag_TE3. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF3 LL_DMA_ClearFlag_GI3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF3); +} + +/** + * @brief Clear Channel 4 global interrupt flag. + * @note Do not Clear Channel 4 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC4, LL_DMA_ClearFlag_HT4, + LL_DMA_ClearFlag_TE4. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF4 LL_DMA_ClearFlag_GI4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF4); +} + +/** + * @brief Clear Channel 5 global interrupt flag. + * @note Do not Clear Channel 5 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC5, LL_DMA_ClearFlag_HT5, + LL_DMA_ClearFlag_TE5. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF5 LL_DMA_ClearFlag_GI5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF5); +} + +#if defined(DMA1_Channel6) +/** + * @brief Clear Channel 6 global interrupt flag. + * @note Do not Clear Channel 6 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC6, LL_DMA_ClearFlag_HT6, + LL_DMA_ClearFlag_TE6. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF6 LL_DMA_ClearFlag_GI6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF6); +} + +#endif /* DMA1_Channel6 */ +#if defined(DMA1_Channel7) +/** + * @brief Clear Channel 7 global interrupt flag. + * @note Do not Clear Channel 7 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC7, LL_DMA_ClearFlag_HT7, + LL_DMA_ClearFlag_TE7. bug id 2.4.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF7 LL_DMA_ClearFlag_GI7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF7); +} + +#endif /* DMA1_Channel7 */ +/** + * @brief Clear Channel 1 transfer complete flag. + * @rmtoll IFCR CTCIF1 LL_DMA_ClearFlag_TC1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF1); +} + +/** + * @brief Clear Channel 2 transfer complete flag. + * @rmtoll IFCR CTCIF2 LL_DMA_ClearFlag_TC2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF2); +} + +/** + * @brief Clear Channel 3 transfer complete flag. + * @rmtoll IFCR CTCIF3 LL_DMA_ClearFlag_TC3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF3); +} + +/** + * @brief Clear Channel 4 transfer complete flag. + * @rmtoll IFCR CTCIF4 LL_DMA_ClearFlag_TC4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF4); +} + +/** + * @brief Clear Channel 5 transfer complete flag. + * @rmtoll IFCR CTCIF5 LL_DMA_ClearFlag_TC5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF5); +} + +#if defined(DMA1_Channel6) +/** + * @brief Clear Channel 6 transfer complete flag. + * @rmtoll IFCR CTCIF6 LL_DMA_ClearFlag_TC6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF6); +} + +#endif /* DMA1_Channel6 */ +#if defined(DMA1_Channel7) +/** + * @brief Clear Channel 7 transfer complete flag. + * @rmtoll IFCR CTCIF7 LL_DMA_ClearFlag_TC7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF7); +} + +#endif /* DMA1_Channel7 */ +/** + * @brief Clear Channel 1 half transfer flag. + * @rmtoll IFCR CHTIF1 LL_DMA_ClearFlag_HT1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF1); +} + +/** + * @brief Clear Channel 2 half transfer flag. + * @rmtoll IFCR CHTIF2 LL_DMA_ClearFlag_HT2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF2); +} + +/** + * @brief Clear Channel 3 half transfer flag. + * @rmtoll IFCR CHTIF3 LL_DMA_ClearFlag_HT3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF3); +} + +/** + * @brief Clear Channel 4 half transfer flag. + * @rmtoll IFCR CHTIF4 LL_DMA_ClearFlag_HT4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF4); +} + +/** + * @brief Clear Channel 5 half transfer flag. + * @rmtoll IFCR CHTIF5 LL_DMA_ClearFlag_HT5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF5); +} + +#if defined(DMA1_Channel6) +/** + * @brief Clear Channel 6 half transfer flag. + * @rmtoll IFCR CHTIF6 LL_DMA_ClearFlag_HT6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF6); +} + +#endif /* DMA1_Channel6 */ +#if defined(DMA1_Channel7) +/** + * @brief Clear Channel 7 half transfer flag. + * @rmtoll IFCR CHTIF7 LL_DMA_ClearFlag_HT7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF7); +} + +#endif /* DMA1_Channel7 */ +/** + * @brief Clear Channel 1 transfer error flag. + * @rmtoll IFCR CTEIF1 LL_DMA_ClearFlag_TE1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF1); +} + +/** + * @brief Clear Channel 2 transfer error flag. + * @rmtoll IFCR CTEIF2 LL_DMA_ClearFlag_TE2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF2); +} + +/** + * @brief Clear Channel 3 transfer error flag. + * @rmtoll IFCR CTEIF3 LL_DMA_ClearFlag_TE3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF3); +} + +/** + * @brief Clear Channel 4 transfer error flag. + * @rmtoll IFCR CTEIF4 LL_DMA_ClearFlag_TE4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF4); +} + +/** + * @brief Clear Channel 5 transfer error flag. + * @rmtoll IFCR CTEIF5 LL_DMA_ClearFlag_TE5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF5); +} + +#if defined(DMA1_Channel6) +/** + * @brief Clear Channel 6 transfer error flag. + * @rmtoll IFCR CTEIF6 LL_DMA_ClearFlag_TE6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF6); +} + +#endif /* DMA1_Channel6 */ +#if defined(DMA1_Channel7) +/** + * @brief Clear Channel 7 transfer error flag. + * @rmtoll IFCR CTEIF7 LL_DMA_ClearFlag_TE7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF7); +} + +#endif /* DMA1_Channel7 */ +/** + * @} + */ + +/** @defgroup DMA_LL_EF_IT_Management IT_Management + * @{ + */ +/** + * @brief Enable Transfer complete interrupt. + * @rmtoll CCR TCIE LL_DMA_EnableIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TC(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TCIE); +} + +/** + * @brief Enable Half transfer interrupt. + * @rmtoll CCR HTIE LL_DMA_EnableIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_HT(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_HTIE); +} + +/** + * @brief Enable Transfer error interrupt. + * @rmtoll CCR TEIE LL_DMA_EnableIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TE(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TEIE); +} + +/** + * @brief Disable Transfer complete interrupt. + * @rmtoll CCR TCIE LL_DMA_DisableIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TC(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TCIE); +} + +/** + * @brief Disable Half transfer interrupt. + * @rmtoll CCR HTIE LL_DMA_DisableIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_HT(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_HTIE); +} + +/** + * @brief Disable Transfer error interrupt. + * @rmtoll CCR TEIE LL_DMA_DisableIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TE(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TEIE); +} + +/** + * @brief Check if Transfer complete Interrupt is enabled. + * @rmtoll CCR TCIE LL_DMA_IsEnabledIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_TCIE) == (DMA_CCR_TCIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Half transfer Interrupt is enabled. + * @rmtoll CCR HTIE LL_DMA_IsEnabledIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_HTIE) == (DMA_CCR_HTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Transfer error Interrupt is enabled. + * @rmtoll CCR TEIE LL_DMA_IsEnabledIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_TEIE) == (DMA_CCR_TEIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct); +ErrorStatus LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel); +void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMA1 || DMA2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_DMA_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dmamux.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dmamux.h new file mode 100644 index 0000000..c808634 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dmamux.h @@ -0,0 +1,1838 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_dmamux.h + * @author MCD Application Team + * @brief Header file of DMAMUX LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_DMAMUX_H +#define STM32G0xx_LL_DMAMUX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (DMAMUX1) + +/** @defgroup DMAMUX_LL DMAMUX + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Private_Constants DMAMUX Private Constants + * @{ + */ +/* Define used to get DMAMUX CCR register size */ +#define DMAMUX_CCR_SIZE 0x00000004UL + +/* Define used to get DMAMUX RGCR register size */ +#define DMAMUX_RGCR_SIZE 0x00000004UL +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Constants DMAMUX Exported Constants + * @{ + */ +/** @defgroup DMAMUX_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_DMAMUX_WriteReg function + * @{ + */ +#define LL_DMAMUX_CFR_CSOF0 DMAMUX_CFR_CSOF0 /*!< Synchronization Event Overrun Flag Channel 0 */ +#define LL_DMAMUX_CFR_CSOF1 DMAMUX_CFR_CSOF1 /*!< Synchronization Event Overrun Flag Channel 1 */ +#define LL_DMAMUX_CFR_CSOF2 DMAMUX_CFR_CSOF2 /*!< Synchronization Event Overrun Flag Channel 2 */ +#define LL_DMAMUX_CFR_CSOF3 DMAMUX_CFR_CSOF3 /*!< Synchronization Event Overrun Flag Channel 3 */ +#define LL_DMAMUX_CFR_CSOF4 DMAMUX_CFR_CSOF4 /*!< Synchronization Event Overrun Flag Channel 4 */ +#if defined(DMAMUX1_Channel5) +#define LL_DMAMUX_CFR_CSOF5 DMAMUX_CFR_CSOF5 /*!< Synchronization Event Overrun Flag Channel 5 */ +#endif /* DMAMUX1_Channel5 */ +#if defined(DMAMUX1_Channel6) +#define LL_DMAMUX_CFR_CSOF6 DMAMUX_CFR_CSOF6 /*!< Synchronization Event Overrun Flag Channel 6 */ +#endif /* DMAMUX1_Channel6 */ +#if defined(DMA2) +#define LL_DMAMUX_CFR_CSOF7 DMAMUX_CFR_CSOF7 /*!< Synchronization Event Overrun Flag Channel 7 */ +#define LL_DMAMUX_CFR_CSOF8 DMAMUX_CFR_CSOF8 /*!< Synchronization Event Overrun Flag Channel 8 */ +#define LL_DMAMUX_CFR_CSOF9 DMAMUX_CFR_CSOF9 /*!< Synchronization Event Overrun Flag Channel 9 */ +#define LL_DMAMUX_CFR_CSOF10 DMAMUX_CFR_CSOF10 /*!< Synchronization Event Overrun Flag Channel 10 */ +#define LL_DMAMUX_CFR_CSOF11 DMAMUX_CFR_CSOF11 /*!< Synchronization Event Overrun Flag Channel 11 */ +#endif /* DMA2 */ +#define LL_DMAMUX_RGCFR_RGCOF0 DMAMUX_RGCFR_COF0 /*!< Request Generator 0 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF1 DMAMUX_RGCFR_COF1 /*!< Request Generator 1 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF2 DMAMUX_RGCFR_COF2 /*!< Request Generator 2 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF3 DMAMUX_RGCFR_COF3 /*!< Request Generator 3 Trigger Event Overrun Flag */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_DMAMUX_ReadReg function + * @{ + */ +#define LL_DMAMUX_CSR_SOF0 DMAMUX_CSR_SOF0 /*!< Synchronization Event Overrun Flag Channel 0 */ +#define LL_DMAMUX_CSR_SOF1 DMAMUX_CSR_SOF1 /*!< Synchronization Event Overrun Flag Channel 1 */ +#define LL_DMAMUX_CSR_SOF2 DMAMUX_CSR_SOF2 /*!< Synchronization Event Overrun Flag Channel 2 */ +#define LL_DMAMUX_CSR_SOF3 DMAMUX_CSR_SOF3 /*!< Synchronization Event Overrun Flag Channel 3 */ +#define LL_DMAMUX_CSR_SOF4 DMAMUX_CSR_SOF4 /*!< Synchronization Event Overrun Flag Channel 4 */ +#if defined(DMAMUX1_Channel5) +#define LL_DMAMUX_CSR_SOF5 DMAMUX_CSR_SOF5 /*!< Synchronization Event Overrun Flag Channel 5 */ +#endif /* DMAMUX1_Channel5 */ +#if defined(DMAMUX1_Channel6) +#define LL_DMAMUX_CSR_SOF6 DMAMUX_CSR_SOF6 /*!< Synchronization Event Overrun Flag Channel 6 */ +#endif /* DMAMUX1_Channel6 */ +#if defined(DMA2) +#define LL_DMAMUX_CSR_SOF7 DMAMUX_CSR_SOF7 /*!< Synchronization Event Overrun Flag Channel 7 */ +#define LL_DMAMUX_CSR_SOF8 DMAMUX_CSR_SOF8 /*!< Synchronization Event Overrun Flag Channel 8 */ +#define LL_DMAMUX_CSR_SOF9 DMAMUX_CSR_SOF9 /*!< Synchronization Event Overrun Flag Channel 9 */ +#define LL_DMAMUX_CSR_SOF10 DMAMUX_CSR_SOF10 /*!< Synchronization Event Overrun Flag Channel 10 */ +#define LL_DMAMUX_CSR_SOF11 DMAMUX_CSR_SOF11 /*!< Synchronization Event Overrun Flag Channel 11 */ +#endif /* DMA2 */ +#define LL_DMAMUX_RGSR_RGOF0 DMAMUX_RGSR_OF0 /*!< Request Generator 0 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF1 DMAMUX_RGSR_OF1 /*!< Request Generator 1 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF2 DMAMUX_RGSR_OF2 /*!< Request Generator 2 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF3 DMAMUX_RGSR_OF3 /*!< Request Generator 3 Trigger Event Overrun Flag */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMAMUX_WriteReg functions + * @{ + */ +#define LL_DMAMUX_CCR_SOIE DMAMUX_CxCR_SOIE /*!< Synchronization Event Overrun Interrupt */ +#define LL_DMAMUX_RGCR_RGOIE DMAMUX_RGxCR_OIE /*!< Request Generation Trigger Event Overrun Interrupt */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST Transfer request + * @{ + */ +#define LL_DMAMUX_REQ_MEM2MEM 0x00000000U /*!< memory to memory transfer */ +#define LL_DMAMUX_REQ_GENERATOR0 0x00000001U /*!< DMAMUX request generator 0 */ +#define LL_DMAMUX_REQ_GENERATOR1 0x00000002U /*!< DMAMUX request generator 1 */ +#define LL_DMAMUX_REQ_GENERATOR2 0x00000003U /*!< DMAMUX request generator 2 */ +#define LL_DMAMUX_REQ_GENERATOR3 0x00000004U /*!< DMAMUX request generator 3 */ +#define LL_DMAMUX_REQ_ADC1 0x00000005U /*!< DMAMUX ADC1 request */ +#if defined(AES) +#define LL_DMAMUX_REQ_AES_IN 0x00000006U /*!< DMAMUX AES_IN request */ +#define LL_DMAMUX_REQ_AES_OUT 0x00000007U /*!< DMAMUX AES_OUT request */ +#endif /* AES */ +#if defined(DAC1) +#define LL_DMAMUX_REQ_DAC1_CH1 0x00000008U /*!< DMAMUX DAC_CH1 request */ +#define LL_DMAMUX_REQ_DAC1_CH2 0x00000009U /*!< DMAMUX DAC_CH2 request */ +#endif /* DAC1 */ +#define LL_DMAMUX_REQ_I2C1_RX 0x0000000AU /*!< DMAMUX I2C1 RX request */ +#define LL_DMAMUX_REQ_I2C1_TX 0x0000000BU /*!< DMAMUX I2C1 TX request */ +#define LL_DMAMUX_REQ_I2C2_RX 0x0000000CU /*!< DMAMUX I2C2 RX request */ +#define LL_DMAMUX_REQ_I2C2_TX 0x0000000DU /*!< DMAMUX I2C2 TX request */ +#if defined(LPUART1) +#define LL_DMAMUX_REQ_LPUART1_RX 0x0000000EU /*!< DMAMUX LPUART1 RX request */ +#define LL_DMAMUX_REQ_LPUART1_TX 0x0000000FU /*!< DMAMUX LPUART1 TX request */ +#endif /* LPUART1 */ +#define LL_DMAMUX_REQ_SPI1_RX 0x00000010U /*!< DMAMUX SPI1 RX request */ +#define LL_DMAMUX_REQ_SPI1_TX 0x00000011U /*!< DMAMUX SPI1 TX request */ +#define LL_DMAMUX_REQ_SPI2_RX 0x00000012U /*!< DMAMUX SPI2 RX request */ +#define LL_DMAMUX_REQ_SPI2_TX 0x00000013U /*!< DMAMUX SPI2 TX request */ +#define LL_DMAMUX_REQ_TIM1_CH1 0x00000014U /*!< DMAMUX TIM1 CH1 request */ +#define LL_DMAMUX_REQ_TIM1_CH2 0x00000015U /*!< DMAMUX TIM1 CH2 request */ +#define LL_DMAMUX_REQ_TIM1_CH3 0x00000016U /*!< DMAMUX TIM1 CH3 request */ +#define LL_DMAMUX_REQ_TIM1_CH4 0x00000017U /*!< DMAMUX TIM1 CH4 request */ +#define LL_DMAMUX_REQ_TIM1_TRIG_COM 0x00000018U /*!< DMAMUX TIM1 TRIG COM request */ +#define LL_DMAMUX_REQ_TIM1_UP 0x00000019U /*!< DMAMUX TIM1 UP request */ +#if defined(TIM2) +#define LL_DMAMUX_REQ_TIM2_CH1 0x0000001AU /*!< DMAMUX TIM2 CH1 request */ +#define LL_DMAMUX_REQ_TIM2_CH2 0x0000001BU /*!< DMAMUX TIM2 CH2 request */ +#define LL_DMAMUX_REQ_TIM2_CH3 0x0000001CU /*!< DMAMUX TIM2 CH3 request */ +#define LL_DMAMUX_REQ_TIM2_CH4 0x0000001DU /*!< DMAMUX TIM2 CH4 request */ +#define LL_DMAMUX_REQ_TIM2_TRIG 0x0000001EU /*!< DMAMUX TIM2 TRIG request */ +#define LL_DMAMUX_REQ_TIM2_UP 0x0000001FU /*!< DMAMUX TIM2 UP request */ +#endif /* TIM2 */ +#define LL_DMAMUX_REQ_TIM3_CH1 0x00000020U /*!< DMAMUX TIM3 CH1 request */ +#define LL_DMAMUX_REQ_TIM3_CH2 0x00000021U /*!< DMAMUX TIM3 CH2 request */ +#define LL_DMAMUX_REQ_TIM3_CH3 0x00000022U /*!< DMAMUX TIM3 CH3 request */ +#define LL_DMAMUX_REQ_TIM3_CH4 0x00000023U /*!< DMAMUX TIM3 CH4 request */ +#define LL_DMAMUX_REQ_TIM3_TRIG 0x00000024U /*!< DMAMUX TIM3 TRIG request */ +#define LL_DMAMUX_REQ_TIM3_UP 0x00000025U /*!< DMAMUX TIM3 UP request */ +#if defined(TIM6) +#define LL_DMAMUX_REQ_TIM6_UP 0x00000026U /*!< DMAMUX TIM6 UP request */ +#endif /* TIM6 */ +#if defined(TIM7) +#define LL_DMAMUX_REQ_TIM7_UP 0x00000027U /*!< DMAMUX TIM7 UP request */ +#endif /* TIM7 */ +#if defined(TIM15) +#define LL_DMAMUX_REQ_TIM15_CH1 0x00000028U /*!< DMAMUX TIM15 CH1 request */ +#define LL_DMAMUX_REQ_TIM15_CH2 0x00000029U /*!< DMAMUX TIM15 CH2 request */ +#define LL_DMAMUX_REQ_TIM15_TRIG_COM 0x0000002AU /*!< DMAMUX TIM15 TRIG COM request */ +#define LL_DMAMUX_REQ_TIM15_UP 0x0000002BU /*!< DMAMUX TIM15 UP request */ +#endif /* TIM15 */ +#define LL_DMAMUX_REQ_TIM16_CH1 0x0000002CU /*!< DMAMUX TIM16 CH1 request */ +#define LL_DMAMUX_REQ_TIM16_COM 0x0000002DU /*!< DMAMUX TIM16 COM request */ +#define LL_DMAMUX_REQ_TIM16_UP 0x0000002EU /*!< DMAMUX TIM16 UP request */ +#define LL_DMAMUX_REQ_TIM17_CH1 0x0000002FU /*!< DMAMUX TIM17 CH1 request */ +#define LL_DMAMUX_REQ_TIM17_COM 0x00000030U /*!< DMAMUX TIM17 COM request */ +#define LL_DMAMUX_REQ_TIM17_UP 0x00000031U /*!< DMAMUX TIM17 UP request */ +#define LL_DMAMUX_REQ_USART1_RX 0x00000032U /*!< DMAMUX USART1 RX request */ +#define LL_DMAMUX_REQ_USART1_TX 0x00000033U /*!< DMAMUX USART1 TX request */ +#define LL_DMAMUX_REQ_USART2_RX 0x00000034U /*!< DMAMUX USART2 RX request */ +#define LL_DMAMUX_REQ_USART2_TX 0x00000035U /*!< DMAMUX USART2 TX request */ +#if defined(USART3) +#define LL_DMAMUX_REQ_USART3_RX 0x00000036U /*!< DMAMUX USART3 RX request */ +#define LL_DMAMUX_REQ_USART3_TX 0x00000037U /*!< DMAMUX USART3 TX request */ +#endif /* USART3 */ +#if defined(USART4) +#define LL_DMAMUX_REQ_USART4_RX 0x00000038U /*!< DMAMUX USART4 RX request */ +#define LL_DMAMUX_REQ_USART4_TX 0x00000039U /*!< DMAMUX USART4 TX request */ +#endif /* USART4 */ +#if defined(UCPD1) +#define LL_DMAMUX_REQ_UCPD1_RX 0x0000003AU /*!< DMAMUX UCPD1 RX request */ +#define LL_DMAMUX_REQ_UCPD1_TX 0x0000003BU /*!< DMAMUX UCPD1 TX request */ +#endif /* UCPD1 */ +#if defined(UCPD2) +#define LL_DMAMUX_REQ_UCPD2_RX 0x0000003CU /*!< DMAMUX UCPD2 RX request */ +#define LL_DMAMUX_REQ_UCPD2_TX 0x0000003DU /*!< DMAMUX UCPD2 TX request */ +#endif /* UCPD2 */ + +#if defined(I2C3) +#define LL_DMAMUX_REQ_I2C3_RX 0x0000003EU /*!< DMAMUX I2C3 RX request */ +#define LL_DMAMUX_REQ_I2C3_TX 0x0000003FU /*!< DMAMUX I2C3 TX request */ +#endif /* I2C3 */ + +#if defined(LPUART2) +#define LL_DMAMUX_REQ_LPUART2_RX 0x00000040U /*!< DMAMUX LPUART2 RX request */ +#define LL_DMAMUX_REQ_LPUART2_TX 0x00000041U /*!< DMAMUX LPUART2 TX request */ +#endif /* LPUART2 */ + +#if defined(SPI3) +#define LL_DMAMUX_REQ_SPI3_RX 0x00000042U /*!< DMAMUX SPI3 RX request */ +#define LL_DMAMUX_REQ_SPI3_TX 0x00000043U /*!< DMAMUX SPI3 TX request */ +#endif /* SPI3 */ + +#if defined(TIM4) +#define LL_DMAMUX_REQ_TIM4_CH1 0x00000044U /*!< DMAMUX TIM4 CH1 request */ +#define LL_DMAMUX_REQ_TIM4_CH2 0x00000045U /*!< DMAMUX TIM4 CH2 request */ +#define LL_DMAMUX_REQ_TIM4_CH3 0x00000046U /*!< DMAMUX TIM4 CH3 request */ +#define LL_DMAMUX_REQ_TIM4_CH4 0x00000047U /*!< DMAMUX TIM4 CH4 request */ +#define LL_DMAMUX_REQ_TIM4_TRIG 0x00000048U /*!< DMAMUX TIM4 TRIG request */ +#define LL_DMAMUX_REQ_TIM4_UP 0x00000049U /*!< DMAMUX TIM4 UP request */ +#endif /* TIM4 */ + +#if defined(USART5) +#define LL_DMAMUX_REQ_USART5_RX 0x0000004AU /*!< DMAMUX USART5 RX request */ +#define LL_DMAMUX_REQ_USART5_TX 0x0000004BU /*!< DMAMUX USART5 TX request */ +#endif /* USART5 */ + +#if defined(USART6) +#define LL_DMAMUX_REQ_USART6_RX 0x0000004CU /*!< DMAMUX USART6 RX request */ +#define LL_DMAMUX_REQ_USART6_TX 0x0000004DU /*!< DMAMUX USART6 TX request */ +#endif /* USART6 */ + +#if defined(STM32G0C1xx)||defined(STM32G0B1xx) +#define LL_DMAMUX_MAX_REQ LL_DMAMUX_REQ_USART6_TX +#elif defined(STM32G0B0xx) +#define LL_DMAMUX_MAX_REQ LL_DMAMUX_REQ_USART4_TX +#elif defined(STM32G081xx)||defined(STM32G071xx) +#define LL_DMAMUX_MAX_REQ LL_DMAMUX_REQ_UCPD2_TX +#elif defined(STM32G070xx) +#define LL_DMAMUX_MAX_REQ LL_DMAMUX_REQ_USART4_TX +#else +#define LL_DMAMUX_MAX_REQ LL_DMAMUX_REQ_USART2_TX +#endif /* STM32G0C1xx || STM32G0B1xx */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_CHANNEL DMAMUX Channel + * @{ + */ +#define LL_DMAMUX_CHANNEL_0 0x00000000U /*!< DMAMUX Channel 0 connected to DMA1 Channel 1 */ +#define LL_DMAMUX_CHANNEL_1 0x00000001U /*!< DMAMUX Channel 1 connected to DMA1 Channel 2 */ +#define LL_DMAMUX_CHANNEL_2 0x00000002U /*!< DMAMUX Channel 2 connected to DMA1 Channel 3 */ +#define LL_DMAMUX_CHANNEL_3 0x00000003U /*!< DMAMUX Channel 3 connected to DMA1 Channel 4 */ +#define LL_DMAMUX_CHANNEL_4 0x00000004U /*!< DMAMUX Channel 4 connected to DMA1 Channel 5 */ +#if defined(DMAMUX1_Channel5) +#define LL_DMAMUX_CHANNEL_5 0x00000005U /*!< DMAMUX Channel 5 connected to DMA1 Channel 6 */ +#endif /* DMAMUX1_Channel5 */ +#if defined(DMAMUX1_Channel6) +#define LL_DMAMUX_CHANNEL_6 0x00000006U /*!< DMAMUX Channel 6 connected to DMA1 Channel 7 */ +#endif /* DMAMUX1_Channel6 */ +#if defined(DMA2) +#define LL_DMAMUX_CHANNEL_7 0x00000007U /*!< DMAMUX Channel 7 connected to DMA2 Channel 1 */ +#define LL_DMAMUX_CHANNEL_8 0x00000008U /*!< DMAMUX Channel 8 connected to DMA2 Channel 2 */ +#define LL_DMAMUX_CHANNEL_9 0x00000009U /*!< DMAMUX Channel 9 connected to DMA2 Channel 3 */ +#define LL_DMAMUX_CHANNEL_10 0x0000000AU /*!< DMAMUX Channel 10 connected to DMA2 Channel 4 */ +#define LL_DMAMUX_CHANNEL_11 0x0000000BU /*!< DMAMUX Channel 11 connected to DMA2 Channel 5 */ +#endif /* DMA2 */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_SYNC_NO Synchronization Signal Polarity + * @{ + */ +#define LL_DMAMUX_SYNC_NO_EVENT 0x00000000U /*!< All requests are blocked */ +#define LL_DMAMUX_SYNC_POL_RISING DMAMUX_CxCR_SPOL_0 /*!< Synchronization on event on rising edge */ +#define LL_DMAMUX_SYNC_POL_FALLING DMAMUX_CxCR_SPOL_1 /*!< Synchronization on event on falling edge */ +#define LL_DMAMUX_SYNC_POL_RISING_FALLING (DMAMUX_CxCR_SPOL_0 | DMAMUX_CxCR_SPOL_1) /*!< Synchronization on event on rising and falling edge */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_SYNC_EVT Synchronization Signal Event + * @{ + */ +#define LL_DMAMUX_SYNC_EXTI_LINE0 0x00000000U /*!< Synchronization signal from EXTI Line0 */ +#define LL_DMAMUX_SYNC_EXTI_LINE1 DMAMUX_CxCR_SYNC_ID_0 /*!< Synchronization signal from EXTI Line1 */ +#define LL_DMAMUX_SYNC_EXTI_LINE2 DMAMUX_CxCR_SYNC_ID_1 /*!< Synchronization signal from EXTI Line2 */ +#define LL_DMAMUX_SYNC_EXTI_LINE3 (DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line3 */ +#define LL_DMAMUX_SYNC_EXTI_LINE4 DMAMUX_CxCR_SYNC_ID_2 /*!< Synchronization signal from EXTI Line4 */ +#define LL_DMAMUX_SYNC_EXTI_LINE5 (DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line5 */ +#define LL_DMAMUX_SYNC_EXTI_LINE6 (DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from EXTI Line6 */ +#define LL_DMAMUX_SYNC_EXTI_LINE7 (DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line7 */ +#define LL_DMAMUX_SYNC_EXTI_LINE8 DMAMUX_CxCR_SYNC_ID_3 /*!< Synchronization signal from EXTI Line8 */ +#define LL_DMAMUX_SYNC_EXTI_LINE9 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line9 */ +#define LL_DMAMUX_SYNC_EXTI_LINE10 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from EXTI Line10 */ +#define LL_DMAMUX_SYNC_EXTI_LINE11 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line11 */ +#define LL_DMAMUX_SYNC_EXTI_LINE12 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_2) /*!< Synchronization signal from EXTI Line12 */ +#define LL_DMAMUX_SYNC_EXTI_LINE13 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line1 3 */ +#define LL_DMAMUX_SYNC_EXTI_LINE14 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from EXTI Line1 4 */ +#define LL_DMAMUX_SYNC_EXTI_LINE15 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line1 5 */ +#define LL_DMAMUX_SYNC_DMAMUX_CH0 DMAMUX_CxCR_SYNC_ID_4 /*!< Synchronization signal from DMAMUX channel0 Event */ +#define LL_DMAMUX_SYNC_DMAMUX_CH1 (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from DMAMUX channel1 Event */ +#define LL_DMAMUX_SYNC_DMAMUX_CH2 (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from DMAMUX channel2 Event */ +#define LL_DMAMUX_SYNC_DMAMUX_CH3 (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from DMAMUX channel3 Event */ +#if defined(LPTIM1) +#define LL_DMAMUX_SYNC_LPTIM1_OUT (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_2) /*!< Synchronization signal from LPTIM1 Output */ +#endif /* LPTIM1 */ +#if defined(LPTIM2) +#define LL_DMAMUX_SYNC_LPTIM2_OUT (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from LPTIM2 Output */ +#endif /* LPTIM2 */ +#define LL_DMAMUX_SYNC_TIM14_OC (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from TIM14 OC */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST_GENERATOR Request Generator Channel + * @{ + */ +#define LL_DMAMUX_REQ_GEN_0 0x00000000U +#define LL_DMAMUX_REQ_GEN_1 0x00000001U +#define LL_DMAMUX_REQ_GEN_2 0x00000002U +#define LL_DMAMUX_REQ_GEN_3 0x00000003U +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST_GEN_POLARITY External Request Signal Generation Polarity + * @{ + */ +#define LL_DMAMUX_REQ_GEN_NO_EVENT 0x00000000U /*!< No external DMA request generation */ +#define LL_DMAMUX_REQ_GEN_POL_RISING DMAMUX_RGxCR_GPOL_0 /*!< External DMA request generation on event on rising edge */ +#define LL_DMAMUX_REQ_GEN_POL_FALLING DMAMUX_RGxCR_GPOL_1 /*!< External DMA request generation on event on falling edge */ +#define LL_DMAMUX_REQ_GEN_POL_RISING_FALLING (DMAMUX_RGxCR_GPOL_0 | DMAMUX_RGxCR_GPOL_1) /*!< External DMA request generation on rising and falling edge */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST_GEN External Request Signal Generation + * @{ + */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE0 0x00000000U /*!< Request signal generation from EXTI Line0 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE1 DMAMUX_RGxCR_SIG_ID_0 /*!< Request signal generation from EXTI Line1 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE2 DMAMUX_RGxCR_SIG_ID_1 /*!< Request signal generation from EXTI Line2 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE3 (DMAMUX_RGxCR_SIG_ID_1 |DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line3 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE4 DMAMUX_RGxCR_SIG_ID_2 /*!< Request signal generation from EXTI Line4 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE5 (DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line5 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE6 (DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from EXTI Line6 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE7 (DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line7 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE8 DMAMUX_RGxCR_SIG_ID_3 /*!< Request signal generation from EXTI Line8 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE9 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line9 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE10 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from EXTI Line10 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE11 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_1 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line11 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE12 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_2) /*!< Request signal generation from EXTI Line12 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE13 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line13 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE14 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from EXTI Line14 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE15 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line15 */ +#define LL_DMAMUX_REQ_GEN_DMAMUX_CH0 DMAMUX_RGxCR_SIG_ID_4 /*!< Request signal generation from DMAMUX channel0 Event */ +#define LL_DMAMUX_REQ_GEN_DMAMUX_CH1 (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from DMAMUX channel1 Event */ +#define LL_DMAMUX_REQ_GEN_DMAMUX_CH2 (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from DMAMUX channel2 Event */ +#define LL_DMAMUX_REQ_GEN_DMAMUX_CH3 (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_1 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from DMAMUX channel3 Event */ +#if defined(LPTIM1) +#define LL_DMAMUX_REQ_GEN_LPTIM1_OUT (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_2) /*!< Request signal generation from LPTIM1 Output */ +#endif /* LPTIM1 */ +#if defined(LPTIM2) +#define LL_DMAMUX_REQ_GEN_LPTIM2_OUT (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from LPTIM2 Output */ +#endif /* LPTIM2 */ +#define LL_DMAMUX_REQ_GEN_TIM14_OC (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from TIM14 OC */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Macros DMAMUX Exported Macros + * @{ + */ + +/** @defgroup DMAMUX_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in DMAMUX register + * @param __INSTANCE__ DMAMUX Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DMAMUX_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMAMUX register + * @param __INSTANCE__ DMAMUX Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DMAMUX_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Functions DMAMUX Exported Functions + * @{ + */ + +/** @defgroup DMAMUX_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Set DMAMUX request ID for DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR DMAREQ_ID LL_DMAMUX_SetRequestID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @param Request This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX_REQ_ADC1 + * @arg @ref LL_DMAMUX_REQ_AES_IN + * @arg @ref LL_DMAMUX_REQ_AES_OUT + * @arg @ref LL_DMAMUX_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_I2C2_RX + * @arg @ref LL_DMAMUX_REQ_I2C2_TX + * @arg @ref LL_DMAMUX_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_SPI2_RX + * @arg @ref LL_DMAMUX_REQ_SPI2_TX + * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM1_UP + * @arg @ref LL_DMAMUX_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM2_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM2_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM3_UP + * @arg @ref LL_DMAMUX_REQ_TIM6_UP + * @arg @ref LL_DMAMUX_REQ_TIM7_UP + * @arg @ref LL_DMAMUX_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM15_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM15_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM15_UP + * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM16_COM + * @arg @ref LL_DMAMUX_REQ_TIM16_UP + * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM17_COM + * @arg @ref LL_DMAMUX_REQ_TIM17_UP + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_USART2_RX + * @arg @ref LL_DMAMUX_REQ_USART2_TX + * @arg @ref LL_DMAMUX_REQ_USART3_RX + * @arg @ref LL_DMAMUX_REQ_USART3_TX + * @arg @ref LL_DMAMUX_REQ_USART4_RX + * @arg @ref LL_DMAMUX_REQ_USART4_TX + * @arg @ref LL_DMAMUX_REQ_UCPD1_RX + * @arg @ref LL_DMAMUX_REQ_UCPD1_TX + * @arg @ref LL_DMAMUX_REQ_UCPD2_RX + * @arg @ref LL_DMAMUX_REQ_UCPD2_TX + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestID(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t Request) +{ + (void)(DMAMUXx); + MODIFY_REG((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_DMAREQ_ID, Request); +} + +/** + * @brief Get DMAMUX request ID for DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR DMAREQ_ID LL_DMAMUX_GetRequestID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX_REQ_ADC1 + * @arg @ref LL_DMAMUX_REQ_AES_IN + * @arg @ref LL_DMAMUX_REQ_AES_OUT + * @arg @ref LL_DMAMUX_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_I2C2_RX + * @arg @ref LL_DMAMUX_REQ_I2C2_TX + * @arg @ref LL_DMAMUX_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_SPI2_RX + * @arg @ref LL_DMAMUX_REQ_SPI2_TX + * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM1_UP + * @arg @ref LL_DMAMUX_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM2_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM2_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM3_UP + * @arg @ref LL_DMAMUX_REQ_TIM6_UP + * @arg @ref LL_DMAMUX_REQ_TIM7_UP + * @arg @ref LL_DMAMUX_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM15_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM15_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM15_UP + * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM16_COM + * @arg @ref LL_DMAMUX_REQ_TIM16_UP + * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM17_COM + * @arg @ref LL_DMAMUX_REQ_TIM17_UP + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_USART2_RX + * @arg @ref LL_DMAMUX_REQ_USART2_TX + * @arg @ref LL_DMAMUX_REQ_USART3_RX + * @arg @ref LL_DMAMUX_REQ_USART3_TX + * @arg @ref LL_DMAMUX_REQ_USART4_RX + * @arg @ref LL_DMAMUX_REQ_USART4_TX + * @arg @ref LL_DMAMUX_REQ_UCPD1_RX + * @arg @ref LL_DMAMUX_REQ_UCPD1_TX + * @arg @ref LL_DMAMUX_REQ_UCPD2_RX + * @arg @ref LL_DMAMUX_REQ_UCPD2_TX + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestID(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_DMAREQ_ID)); +} + +/** + * @brief Set the number of DMA request that will be autorized after a synchronization event and/or the number of DMA request needed to generate an event. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR NBREQ LL_DMAMUX_SetSyncRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @param RequestNb This parameter must be a value between Min_Data = 1 and Max_Data = 32. + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetSyncRequestNb(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t RequestNb) +{ + (void)(DMAMUXx); + MODIFY_REG((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_NBREQ, ((RequestNb - 1U) << DMAMUX_CxCR_NBREQ_Pos)); +} + +/** + * @brief Get the number of DMA request that will be autorized after a synchronization event and/or the number of DMA request needed to generate an event. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR NBREQ LL_DMAMUX_GetSyncRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval Between Min_Data = 1 and Max_Data = 32 + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetSyncRequestNb(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (uint32_t)(((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_NBREQ)) >> DMAMUX_CxCR_NBREQ_Pos) + 1U); +} + +/** + * @brief Set the polarity of the signal on which the DMA request is synchronized. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SPOL LL_DMAMUX_SetSyncPolarity + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_NO_EVENT + * @arg @ref LL_DMAMUX_SYNC_POL_RISING + * @arg @ref LL_DMAMUX_SYNC_POL_FALLING + * @arg @ref LL_DMAMUX_SYNC_POL_RISING_FALLING + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetSyncPolarity(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t Polarity) +{ + (void)(DMAMUXx); + MODIFY_REG((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SPOL, Polarity); +} + +/** + * @brief Get the polarity of the signal on which the DMA request is synchronized. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SPOL LL_DMAMUX_GetSyncPolarity + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_NO_EVENT + * @arg @ref LL_DMAMUX_SYNC_POL_RISING + * @arg @ref LL_DMAMUX_SYNC_POL_FALLING + * @arg @ref LL_DMAMUX_SYNC_POL_RISING_FALLING + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetSyncPolarity(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SPOL)); +} + +/** + * @brief Enable the Event Generation on DMAMUX channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR EGE LL_DMAMUX_EnableEventGeneration + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableEventGeneration(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + SET_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_EGE); +} + +/** + * @brief Disable the Event Generation on DMAMUX channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR EGE LL_DMAMUX_DisableEventGeneration + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableEventGeneration(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + CLEAR_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_EGE); +} + +/** + * @brief Check if the Event Generation on DMAMUX channel x is enabled or disabled. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR EGE LL_DMAMUX_IsEnabledEventGeneration + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledEventGeneration(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return ((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_EGE) == (DMAMUX_CxCR_EGE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the synchronization mode. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SE LL_DMAMUX_EnableSync + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableSync(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + SET_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SE); +} + +/** + * @brief Disable the synchronization mode. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SE LL_DMAMUX_DisableSync + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableSync(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + CLEAR_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SE); +} + +/** + * @brief Check if the synchronization mode is enabled or disabled. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SE LL_DMAMUX_IsEnabledSync + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledSync(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return ((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SE) == (DMAMUX_CxCR_SE)) ? 1UL : 0UL); +} + +/** + * @brief Set DMAMUX synchronization ID on DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SYNC_ID LL_DMAMUX_SetSyncID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @param SyncID This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE0 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE1 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE2 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE3 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE4 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE5 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE6 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE7 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE8 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE9 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE10 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE11 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE12 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE13 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE14 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE15 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH0 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH1 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH2 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH3 + * @arg @ref LL_DMAMUX_SYNC_LPTIM1_OUT + * @arg @ref LL_DMAMUX_SYNC_LPTIM2_OUT + * @arg @ref LL_DMAMUX_SYNC_TIM14_OC + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetSyncID(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t SyncID) +{ + (void)(DMAMUXx); + MODIFY_REG((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SYNC_ID, SyncID); +} + +/** + * @brief Get DMAMUX synchronization ID on DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SYNC_ID LL_DMAMUX_GetSyncID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE0 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE1 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE2 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE3 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE4 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE5 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE6 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE7 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE8 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE9 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE10 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE11 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE12 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE13 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE14 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE15 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH0 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH1 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH2 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH3 + * @arg @ref LL_DMAMUX_SYNC_LPTIM1_OUT + * @arg @ref LL_DMAMUX_SYNC_LPTIM2_OUT + * @arg @ref LL_DMAMUX_SYNC_TIM14_OC + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetSyncID(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SYNC_ID)); +} + +/** + * @brief Enable the Request Generator. + * @rmtoll RGxCR GE LL_DMAMUX_EnableRequestGen + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableRequestGen(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + SET_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * + (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GE); +} + +/** + * @brief Disable the Request Generator. + * @rmtoll RGxCR GE LL_DMAMUX_DisableRequestGen + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableRequestGen(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + CLEAR_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * + (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GE); +} + +/** + * @brief Check if the Request Generator is enabled or disabled. + * @rmtoll RGxCR GE LL_DMAMUX_IsEnabledRequestGen + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledRequestGen(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return ((READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * + (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GE) == (DMAMUX_RGxCR_GE)) ? 1UL : 0UL); +} + +/** + * @brief Set the polarity of the signal on which the DMA request is generated. + * @rmtoll RGxCR GPOL LL_DMAMUX_SetRequestGenPolarity + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_NO_EVENT + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_FALLING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING_FALLING + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestGenPolarity(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel, + uint32_t Polarity) +{ + (void)(DMAMUXx); + MODIFY_REG(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * + (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GPOL, Polarity); +} + +/** + * @brief Get the polarity of the signal on which the DMA request is generated. + * @rmtoll RGxCR GPOL LL_DMAMUX_GetRequestGenPolarity + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_NO_EVENT + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_FALLING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING_FALLING + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestGenPolarity(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GPOL)); +} + +/** + * @brief Set the number of DMA request that will be autorized after a generation event. + * @note This field can only be written when Generator is disabled. + * @rmtoll RGxCR GNBREQ LL_DMAMUX_SetGenRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @param RequestNb This parameter must be a value between Min_Data = 1 and Max_Data = 32. + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetGenRequestNb(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel, + uint32_t RequestNb) +{ + (void)(DMAMUXx); + MODIFY_REG(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * + (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GNBREQ, (RequestNb - 1U) << DMAMUX_RGxCR_GNBREQ_Pos); +} + +/** + * @brief Get the number of DMA request that will be autorized after a generation event. + * @rmtoll RGxCR GNBREQ LL_DMAMUX_GetGenRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval Between Min_Data = 1 and Max_Data = 32 + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetGenRequestNb(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return (uint32_t)((READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GNBREQ) >> DMAMUX_RGxCR_GNBREQ_Pos) + 1U); +} + +/** + * @brief Set DMAMUX external Request Signal ID on DMAMUX Request Generation Trigger Event Channel x. + * @rmtoll RGxCR SIG_ID LL_DMAMUX_SetRequestSignalID + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @param RequestSignalID This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE0 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE1 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE2 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE3 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE4 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE5 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE6 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE7 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE8 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE9 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE10 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE11 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE12 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE13 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE14 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE15 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH0 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH1 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH2 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH3 + * @arg @ref LL_DMAMUX_REQ_GEN_LPTIM1_OUT + * @arg @ref LL_DMAMUX_REQ_GEN_LPTIM2_OUT + * @arg @ref LL_DMAMUX_REQ_GEN_TIM14_OC + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestSignalID(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel, + uint32_t RequestSignalID) +{ + (void)(DMAMUXx); + MODIFY_REG(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * + (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_SIG_ID, RequestSignalID); +} + +/** + * @brief Get DMAMUX external Request Signal ID set on DMAMUX Channel x. + * @rmtoll RGxCR SIG_ID LL_DMAMUX_GetRequestSignalID + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE0 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE1 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE2 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE3 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE4 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE5 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE6 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE7 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE8 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE9 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE10 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE11 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE12 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE13 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE14 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE15 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH0 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH1 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH2 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH3 + * @arg @ref LL_DMAMUX_REQ_GEN_LPTIM1_OUT + * @arg @ref LL_DMAMUX_REQ_GEN_LPTIM2_OUT + * @arg @ref LL_DMAMUX_REQ_GEN_TIM14_OC + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestSignalID(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_SIG_ID)); +} + +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Synchronization Event Overrun Flag Channel 0. + * @rmtoll CSR SOF0 LL_DMAMUX_IsActiveFlag_SO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO0(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF0) == (DMAMUX_CSR_SOF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 1. + * @rmtoll CSR SOF1 LL_DMAMUX_IsActiveFlag_SO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO1(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF1) == (DMAMUX_CSR_SOF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 2. + * @rmtoll CSR SOF2 LL_DMAMUX_IsActiveFlag_SO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO2(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF2) == (DMAMUX_CSR_SOF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 3. + * @rmtoll CSR SOF3 LL_DMAMUX_IsActiveFlag_SO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO3(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF3) == (DMAMUX_CSR_SOF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 4. + * @rmtoll CSR SOF4 LL_DMAMUX_IsActiveFlag_SO4 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO4(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF4) == (DMAMUX_CSR_SOF4)) ? 1UL : 0UL); +} + +#if defined(DMAMUX1_Channel5) +/** + * @brief Get Synchronization Event Overrun Flag Channel 5. + * @rmtoll CSR SOF5 LL_DMAMUX_IsActiveFlag_SO5 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO5(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF5) == (DMAMUX_CSR_SOF5)) ? 1UL : 0UL); +} + +#endif /* DMAMUX1_Channel5 */ +#if defined(DMAMUX1_Channel6) +/** + * @brief Get Synchronization Event Overrun Flag Channel 6. + * @rmtoll CSR SOF6 LL_DMAMUX_IsActiveFlag_SO6 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO6(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF6) == (DMAMUX_CSR_SOF6)) ? 1UL : 0UL); +} + +#endif /* DMAMUX1_Channel6 */ +#if defined(DMAMUX1_Channel7) +/** + * @brief Get Synchronization Event Overrun Flag Channel 7. + * @rmtoll CSR SOF7 LL_DMAMUX_IsActiveFlag_SO7 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO7(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF7) == (DMAMUX_CSR_SOF7)) ? 1UL : 0UL); +} + +#endif /* DMAMUX1_Channel7 */ +#if defined(DMAMUX1_Channel8) +/** + * @brief Get Synchronization Event Overrun Flag Channel 8. + * @rmtoll CSR SOF8 LL_DMAMUX_IsActiveFlag_SO8 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO8(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF8) == (DMAMUX_CSR_SOF8)) ? 1UL : 0UL); +} + +#endif /* DMAMUX1_Channel8 */ +#if defined(DMAMUX1_Channel9) +/** + * @brief Get Synchronization Event Overrun Flag Channel 9. + * @rmtoll CSR SOF9 LL_DMAMUX_IsActiveFlag_SO9 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO9(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF9) == (DMAMUX_CSR_SOF9)) ? 1UL : 0UL); +} + +#endif /* DMAMUX1_Channel9 */ +#if defined(DMAMUX1_Channel10) +/** + * @brief Get Synchronization Event Overrun Flag Channel 10. + * @rmtoll CSR SOF10 LL_DMAMUX_IsActiveFlag_SO10 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO10(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF10) == (DMAMUX_CSR_SOF10)) ? 1UL : 0UL); +} + +#endif /* DMAMUX1_Channel10 */ +#if defined(DMAMUX1_Channel11) +/** + * @brief Get Synchronization Event Overrun Flag Channel 11. + * @rmtoll CSR SOF11 LL_DMAMUX_IsActiveFlag_SO11 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO11(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF11) == (DMAMUX_CSR_SOF11)) ? 1UL : 0UL); +} + +#endif /* DMAMUX1_Channel11 */ +/** + * @brief Get Request Generator 0 Trigger Event Overrun Flag. + * @rmtoll RGSR OF0 LL_DMAMUX_IsActiveFlag_RGO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO0(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_RequestGenStatus->RGSR, DMAMUX_RGSR_OF0) == (DMAMUX_RGSR_OF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 1 Trigger Event Overrun Flag. + * @rmtoll RGSR OF1 LL_DMAMUX_IsActiveFlag_RGO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO1(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_RequestGenStatus->RGSR, DMAMUX_RGSR_OF1) == (DMAMUX_RGSR_OF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 2 Trigger Event Overrun Flag. + * @rmtoll RGSR OF2 LL_DMAMUX_IsActiveFlag_RGO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO2(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_RequestGenStatus->RGSR, DMAMUX_RGSR_OF2) == (DMAMUX_RGSR_OF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 3 Trigger Event Overrun Flag. + * @rmtoll RGSR OF3 LL_DMAMUX_IsActiveFlag_RGO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO3(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_RequestGenStatus->RGSR, DMAMUX_RGSR_OF3) == (DMAMUX_RGSR_OF3)) ? 1UL : 0UL); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 0. + * @rmtoll CFR CSOF0 LL_DMAMUX_ClearFlag_SO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO0(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF0); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 1. + * @rmtoll CFR CSOF1 LL_DMAMUX_ClearFlag_SO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO1(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF1); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 2. + * @rmtoll CFR CSOF2 LL_DMAMUX_ClearFlag_SO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO2(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF2); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 3. + * @rmtoll CFR CSOF3 LL_DMAMUX_ClearFlag_SO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO3(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF3); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 4. + * @rmtoll CFR CSOF4 LL_DMAMUX_ClearFlag_SO4 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO4(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF4); +} + +#if defined(DMAMUX1_Channel5) +/** + * @brief Clear Synchronization Event Overrun Flag Channel 5. + * @rmtoll CFR CSOF5 LL_DMAMUX_ClearFlag_SO5 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO5(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF5); +} + +#endif /* DMAMUX1_Channel5 */ +#if defined(DMAMUX1_Channel6) +/** + * @brief Clear Synchronization Event Overrun Flag Channel 6. + * @rmtoll CFR CSOF6 LL_DMAMUX_ClearFlag_SO6 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO6(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF6); +} + +#endif /* DMAMUX1_Channel6 */ +#if defined(DMAMUX1_Channel7) +/** + * @brief Clear Synchronization Event Overrun Flag Channel 7. + * @rmtoll CFR CSOF7 LL_DMAMUX_ClearFlag_SO7 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO7(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF7); +} + +#endif /* DMAMUX1_Channel7 */ +#if defined(DMAMUX1_Channel8) +/** + * @brief Clear Synchronization Event Overrun Flag Channel 8. + * @rmtoll CFR CSOF8 LL_DMAMUX_ClearFlag_SO8 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO8(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF8); +} + +#endif /* DMAMUX1_Channel8 */ +#if defined(DMAMUX1_Channel9) +/** + * @brief Clear Synchronization Event Overrun Flag Channel 9. + * @rmtoll CFR CSOF9 LL_DMAMUX_ClearFlag_SO9 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO9(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF9); +} + +#endif /* DMAMUX1_Channel9 */ +#if defined(DMAMUX1_Channel10) +/** + * @brief Clear Synchronization Event Overrun Flag Channel 10. + * @rmtoll CFR CSOF10 LL_DMAMUX_ClearFlag_SO10 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO10(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF10); +} + +#endif /* DMAMUX1_Channel10 */ +#if defined(DMAMUX1_Channel11) +/** + * @brief Clear Synchronization Event Overrun Flag Channel 11. + * @rmtoll CFR CSOF11 LL_DMAMUX_ClearFlag_SO11 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO11(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF11); +} + +#endif /* DMAMUX1_Channel11 */ +/** + * @brief Clear Request Generator 0 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF0 LL_DMAMUX_ClearFlag_RGO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO0(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_RequestGenStatus->RGCFR, DMAMUX_RGCFR_COF0); +} + +/** + * @brief Clear Request Generator 1 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF1 LL_DMAMUX_ClearFlag_RGO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO1(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_RequestGenStatus->RGCFR, DMAMUX_RGCFR_COF1); +} + +/** + * @brief Clear Request Generator 2 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF2 LL_DMAMUX_ClearFlag_RGO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO2(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_RequestGenStatus->RGCFR, DMAMUX_RGCFR_COF2); +} + +/** + * @brief Clear Request Generator 3 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF3 LL_DMAMUX_ClearFlag_RGO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO3(const DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_RequestGenStatus->RGCFR, DMAMUX_RGCFR_COF3); +} + +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable the Synchronization Event Overrun Interrupt on DMAMUX channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SOIE LL_DMAMUX_EnableIT_SO + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableIT_SO(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + SET_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SOIE); +} + +/** + * @brief Disable the Synchronization Event Overrun Interrupt on DMAMUX channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SOIE LL_DMAMUX_DisableIT_SO + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableIT_SO(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + CLEAR_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SOIE); +} + +/** + * @brief Check if the Synchronization Event Overrun Interrupt on DMAMUX channel x is enabled or disabled. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 11 are mapped to DMA2 channel 1 to 5 (**** only available on chip which support DMA2 ****). + * @rmtoll CxCR SOIE LL_DMAMUX_IsEnabledIT_SO + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 (**** only available on some devices ****) + * @arg @ref LL_DMAMUX_CHANNEL_6 (**** only available on some devices ****) + * + * @arg All the next values are only available on chip which support DMA2: + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledIT_SO(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SOIE)) == (DMAMUX_CxCR_SOIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the Request Generation Trigger Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll RGxCR OIE LL_DMAMUX_EnableIT_RGO + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableIT_RGO(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + SET_BIT((DMAMUX1_RequestGenerator0 + RequestGenChannel)->RGCR, DMAMUX_RGxCR_OIE); +} + +/** + * @brief Disable the Request Generation Trigger Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll RGxCR OIE LL_DMAMUX_DisableIT_RGO + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableIT_RGO(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + CLEAR_BIT((DMAMUX1_RequestGenerator0 + RequestGenChannel)->RGCR, DMAMUX_RGxCR_OIE); +} + +/** + * @brief Check if the Request Generation Trigger Event Overrun Interrupt on DMAMUX channel x is enabled or disabled. + * @rmtoll RGxCR OIE LL_DMAMUX_IsEnabledIT_RGO + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledIT_RGO(const DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return ((READ_BIT((DMAMUX1_RequestGenerator0 + RequestGenChannel)->RGCR, DMAMUX_RGxCR_OIE) == (DMAMUX_RGxCR_OIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMAMUX1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_DMAMUX_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_exti.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_exti.h new file mode 100644 index 0000000..d63b0bc --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_exti.h @@ -0,0 +1,1557 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_exti.h + * @author MCD Application Team + * @brief Header file of EXTI LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_EXTI_H +#define STM32G0xx_LL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (EXTI) + +/** @defgroup EXTI_LL EXTI + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +#define LL_EXTI_REGISTER_PINPOS_SHFT 16u /*!< Define used to shift pin position in EXTICR register */ + +/* Private Macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure + * @{ + */ +typedef struct +{ + + uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31 + This parameter can be any combination of @ref EXTI_LL_EC_LINE */ +#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) + uint32_t Line_32_63; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 32 to 63 + This parameter can be any combination of @ref EXTI_LL_EC_LINE */ +#endif /* STM32G081xx || STM32G071xx || STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines. + This parameter can be set either to ENABLE or DISABLE */ + + uint8_t Mode; /*!< Specifies the mode for the EXTI lines. + This parameter can be a value of @ref EXTI_LL_EC_MODE. */ + + uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. + This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */ +} LL_EXTI_InitTypeDef; + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_LL_EC_LINE LINE + * @{ + */ +#define LL_EXTI_LINE_0 EXTI_IMR1_IM0 /*!< Extended line 0 */ +#define LL_EXTI_LINE_1 EXTI_IMR1_IM1 /*!< Extended line 1 */ +#define LL_EXTI_LINE_2 EXTI_IMR1_IM2 /*!< Extended line 2 */ +#define LL_EXTI_LINE_3 EXTI_IMR1_IM3 /*!< Extended line 3 */ +#define LL_EXTI_LINE_4 EXTI_IMR1_IM4 /*!< Extended line 4 */ +#define LL_EXTI_LINE_5 EXTI_IMR1_IM5 /*!< Extended line 5 */ +#define LL_EXTI_LINE_6 EXTI_IMR1_IM6 /*!< Extended line 6 */ +#define LL_EXTI_LINE_7 EXTI_IMR1_IM7 /*!< Extended line 7 */ +#define LL_EXTI_LINE_8 EXTI_IMR1_IM8 /*!< Extended line 8 */ +#define LL_EXTI_LINE_9 EXTI_IMR1_IM9 /*!< Extended line 9 */ +#define LL_EXTI_LINE_10 EXTI_IMR1_IM10 /*!< Extended line 10 */ +#define LL_EXTI_LINE_11 EXTI_IMR1_IM11 /*!< Extended line 11 */ +#define LL_EXTI_LINE_12 EXTI_IMR1_IM12 /*!< Extended line 12 */ +#define LL_EXTI_LINE_13 EXTI_IMR1_IM13 /*!< Extended line 13 */ +#define LL_EXTI_LINE_14 EXTI_IMR1_IM14 /*!< Extended line 14 */ +#define LL_EXTI_LINE_15 EXTI_IMR1_IM15 /*!< Extended line 15 */ +#if defined(EXTI_IMR1_IM16) +#define LL_EXTI_LINE_16 EXTI_IMR1_IM16 /*!< Extended line 16 */ +#endif /* EXTI_IMR1_IM16 */ +#if defined(EXTI_IMR1_IM17) +#define LL_EXTI_LINE_17 EXTI_IMR1_IM17 /*!< Extended line 17 */ +#endif /* EXTI_IMR1_IM17 */ +#if defined(EXTI_IMR1_IM18) +#define LL_EXTI_LINE_18 EXTI_IMR1_IM18 /*!< Extended line 18 */ +#endif /* EXTI_IMR1_IM18 */ +#define LL_EXTI_LINE_19 EXTI_IMR1_IM19 /*!< Extended line 19 */ +#if defined(EXTI_IMR1_IM20) +#define LL_EXTI_LINE_20 EXTI_IMR1_IM20 /*!< Extended line 20 */ +#endif /* EXTI_IMR1_IM20 */ +#if defined(EXTI_IMR1_IM21) +#define LL_EXTI_LINE_21 EXTI_IMR1_IM21 /*!< Extended line 21 */ +#endif /* EXTI_IMR1_IM21 */ +#if defined(EXTI_IMR1_IM22) +#define LL_EXTI_LINE_22 EXTI_IMR1_IM22 /*!< Extended line 22 */ +#endif /* EXTI_IMR1_IM22 */ +#define LL_EXTI_LINE_23 EXTI_IMR1_IM23 /*!< Extended line 23 */ +#if defined(EXTI_IMR1_IM24) +#define LL_EXTI_LINE_24 EXTI_IMR1_IM24 /*!< Extended line 24 */ +#endif /* EXTI_IMR1_IM24 */ +#if defined(EXTI_IMR1_IM25) +#define LL_EXTI_LINE_25 EXTI_IMR1_IM25 /*!< Extended line 25 */ +#endif /* EXTI_IMR1_IM25 */ +#if defined(EXTI_IMR1_IM26) +#define LL_EXTI_LINE_26 EXTI_IMR1_IM26 /*!< Extended line 26 */ +#endif /* EXTI_IMR1_IM26 */ +#if defined(EXTI_IMR1_IM27) +#define LL_EXTI_LINE_27 EXTI_IMR1_IM27 /*!< Extended line 27 */ +#endif /* EXTI_IMR1_IM27 */ +#if defined(EXTI_IMR1_IM28) +#define LL_EXTI_LINE_28 EXTI_IMR1_IM28 /*!< Extended line 28 */ +#endif /* EXTI_IMR1_IM28 */ +#if defined(EXTI_IMR1_IM29) +#define LL_EXTI_LINE_29 EXTI_IMR1_IM29 /*!< Extended line 29 */ +#endif /* EXTI_IMR1_IM29 */ +#if defined(EXTI_IMR1_IM30) +#define LL_EXTI_LINE_30 EXTI_IMR1_IM30 /*!< Extended line 30 */ +#endif /* EXTI_IMR1_IM30 */ +#if defined(EXTI_IMR1_IM31) +#define LL_EXTI_LINE_31 EXTI_IMR1_IM31 /*!< Extended line 31 */ +#endif /* EXTI_IMR1_IM31 */ +#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR1_IM /*!< All Extended line not reserved*/ + +#if defined(EXTI_IMR2_IM32) +#define LL_EXTI_LINE_32 EXTI_IMR2_IM32 /*!< Extended line 32 */ +#endif /* EXTI_IMR2_IM32 */ +#if defined(EXTI_IMR2_IM33) +#define LL_EXTI_LINE_33 EXTI_IMR2_IM33 /*!< Extended line 33 */ +#endif /* EXTI_IMR2_IM33 */ +#if defined(EXTI_IMR2_IM34) +#define LL_EXTI_LINE_34 EXTI_IMR2_IM34 /*!< Extended line 34 */ +#endif /* EXTI_IMR2_IM34 */ +#if defined(EXTI_IMR2_IM35) +#define LL_EXTI_LINE_35 EXTI_IMR2_IM35 /*!< Extended line 35 */ +#endif /* EXTI_IMR2_IM35 */ +#if defined(EXTI_IMR2_IM36) +#define LL_EXTI_LINE_36 EXTI_IMR2_IM36 /*!< Extended line 36 */ +#endif /* EXTI_IMR2_IM36 */ +#if defined(EXTI_IMR2_IM32) || defined(EXTI_IMR2_IM33) || defined(EXTI_IMR2_IM34) || defined(EXTI_IMR2_IM35) || defined(EXTI_IMR2_IM36) +#define LL_EXTI_LINE_ALL_32_63 EXTI_IMR2_IM /*!< All Extended line not reserved*/ +#endif /* EXTI_IMR2_IM32 || EXTI_IMR2_IM33 || EXTI_IMR2_IM34 || EXTI_IMR2_IM35 || EXTI_IMR2_IM36 */ + +#define LL_EXTI_LINE_ALL 0xFFFFFFFFU /*!< All Extended line */ + +#if defined(USE_FULL_LL_DRIVER) +#define LL_EXTI_LINE_NONE 0x00000000U /*!< None Extended line */ +#endif /*USE_FULL_LL_DRIVER*/ + +/** @defgroup EXTI_LL_EC_CONFIG_PORT EXTI CONFIG PORT + * @{ + */ +#define LL_EXTI_CONFIG_PORTA 0U /*!< EXTI PORT A */ +#define LL_EXTI_CONFIG_PORTB EXTI_EXTICR1_EXTI0_0 /*!< EXTI PORT B */ +#define LL_EXTI_CONFIG_PORTC EXTI_EXTICR1_EXTI0_1 /*!< EXTI PORT C */ +#if defined(GPIOD_BASE) +#define LL_EXTI_CONFIG_PORTD (EXTI_EXTICR1_EXTI0_1|EXTI_EXTICR1_EXTI0_0) /*!< EXTI PORT D */ +#endif /*GPIOD_BASE*/ +#if defined(GPIOE_BASE) +#define LL_EXTI_CONFIG_PORTE EXTI_EXTICR1_EXTI0_2 /*!< EXTI PORT E */ +#endif /*GPIOE_BASE*/ +#define LL_EXTI_CONFIG_PORTF (EXTI_EXTICR1_EXTI0_2|EXTI_EXTICR1_EXTI0_0) /*!< EXTI PORT F */ +/** + * @} + */ + +/** @defgroup EXTI_LL_EC_CONFIG_LINE EXTI CONFIG LINE + * @{ + */ +#define LL_EXTI_CONFIG_LINE0 ((0uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_POSITION_0 | EXTICR[0] */ +#define LL_EXTI_CONFIG_LINE1 ((8uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_POSITION_8 | EXTICR[0] */ +#define LL_EXTI_CONFIG_LINE2 ((16uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_POSITION_16 | EXTICR[0] */ +#define LL_EXTI_CONFIG_LINE3 ((24uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_POSITION_24 | EXTICR[0] */ +#define LL_EXTI_CONFIG_LINE4 ((0uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_POSITION_0 | EXTICR[1] */ +#define LL_EXTI_CONFIG_LINE5 ((8uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_POSITION_8 | EXTICR[1] */ +#define LL_EXTI_CONFIG_LINE6 ((16uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_POSITION_16 | EXTICR[1] */ +#define LL_EXTI_CONFIG_LINE7 ((24uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_POSITION_24 | EXTICR[1] */ +#define LL_EXTI_CONFIG_LINE8 ((0uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /*!< EXTI_POSITION_0 | EXTICR[2] */ +#define LL_EXTI_CONFIG_LINE9 ((8uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /*!< EXTI_POSITION_8 | EXTICR[2] */ +#define LL_EXTI_CONFIG_LINE10 ((16uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /*!< EXTI_POSITION_16 | EXTICR[2] */ +#define LL_EXTI_CONFIG_LINE11 ((24uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /*!< EXTI_POSITION_24 | EXTICR[2] */ +#define LL_EXTI_CONFIG_LINE12 ((0uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /*!< EXTI_POSITION_0 | EXTICR[3] */ +#define LL_EXTI_CONFIG_LINE13 ((8uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /*!< EXTI_POSITION_8 | EXTICR[3] */ +#define LL_EXTI_CONFIG_LINE14 ((16uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /*!< EXTI_POSITION_16 | EXTICR[3] */ +#define LL_EXTI_CONFIG_LINE15 ((24uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /*!< EXTI_POSITION_24 | EXTICR[3] */ +/** + * @} + */ +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup EXTI_LL_EC_MODE Mode + * @{ + */ +#define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */ +#define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */ +#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */ +/** + * @} + */ + +/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger + * @{ + */ +#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */ +#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */ +#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */ +#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */ + +/** + * @} + */ + + +#endif /*USE_FULL_LL_DRIVER*/ + + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in EXTI register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__)) + +/** + * @brief Read a value in EXTI register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__) +/** + * @} + */ + + +/** + * @} + */ + + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions + * @{ + */ +/** @defgroup EXTI_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR1 IMx LL_EXTI_EnableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->IMR1, ExtiLine); +} + +#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 32 to 63 + * @note The reset value for the direct lines (lines 32 & 33) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR2 IMx LL_EXTI_EnableIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableIT_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->IMR2, ExtiLine); +} +#endif /* STM32G081xx || STM32G071xx || STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR1 IMx LL_EXTI_DisableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->IMR1, ExtiLine); +} + +#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 32 to 63 + * @note The reset value for the direct lines (lines 32 & 33) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR2 IMx LL_EXTI_DisableIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableIT_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->IMR2, ExtiLine); +} +#endif /* STM32G081xx || STM32G071xx || STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR1 IMx LL_EXTI_IsEnabledIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->IMR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 32 to 63 + * @note The reset value for the direct lines (lines 32 & 33) + * is set to 1 in order to enable the interrupt by default. + * @rmtoll IMR2 IMx LL_EXTI_IsEnabledIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->IMR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} +#endif /* STM32G081xx || STM32G071xx || STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Event_Management Event_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Event request for Lines in range 0 to 31 + * @rmtoll EMR1 EMx LL_EXTI_EnableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->EMR1, ExtiLine); + +} + +#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Enable ExtiLine Event request for Lines in range 32 to 63 + * @rmtoll EMR2 EMx LL_EXTI_EnableEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableEvent_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->EMR2, ExtiLine); +} +#endif /* STM32G081xx || STM32G071xx || STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +/** + * @brief Disable ExtiLine Event request for Lines in range 0 to 31 + * @rmtoll EMR1 EMx LL_EXTI_DisableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->EMR1, ExtiLine); +} + +#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Disable ExtiLine Event request for Lines in range 32 to 63 + * @rmtoll EMR2 EMx LL_EXTI_DisableEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableEvent_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->EMR2, ExtiLine); +} +#endif +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31 + * @rmtoll EMR1 EMx LL_EXTI_IsEnabledEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->EMR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 32 to 63 + * @rmtoll EMR2 EMx LL_EXTI_IsEnabledEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->EMR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} +#endif /* STM32G081xx || STM32G071xx || STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR1 RTx LL_EXTI_EnableRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->RTSR1, ExtiLine); + +} +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR2 RTx LL_EXTI_EnableRisingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableRisingTrig_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->RTSR2, ExtiLine); + +} +#endif /* STM32G0C1xx || STM32G0B1xx */ + +/** + * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR1 RTx LL_EXTI_DisableRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->RTSR1, ExtiLine); + +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR2 RTx LL_EXTI_DisableRisingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableRisingTrig_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->RTSR2, ExtiLine); + +} +#endif /* STM32G0C1xx || STM32G0B1xx */ + +/** + * @brief Check if rising edge trigger is enabled for Lines in range 0 to 31 + * @rmtoll RTSR1 RTx LL_EXTI_IsEnabledRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->RTSR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Check if rising edge trigger is enabled for Lines in range 32 to 63 + * @rmtoll RTSR2 RTx LL_EXTI_IsEnabledRisingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->RTSR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} +#endif /* STM32G0C1xx || STM32G0B1xx */ + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll FTSR1 FTx LL_EXTI_EnableFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->FTSR1, ExtiLine); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll FTSR2 FTx LL_EXTI_EnableFallingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableFallingTrig_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->FTSR2, ExtiLine); +} +#endif /* STM32G0C1xx || STM32G0B1xx */ + +/** + * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for the same interrupt line. + * In this case, both generate a trigger condition. + * @rmtoll FTSR1 FTx LL_EXTI_DisableFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->FTSR1, ExtiLine); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for the same interrupt line. + * In this case, both generate a trigger condition. + * @rmtoll FTSR2 FTx LL_EXTI_DisableFallingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableFallingTrig_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->FTSR2, ExtiLine); +} +#endif /* STM32G0C1xx || STM32G0B1xx */ + +/** + * @brief Check if falling edge trigger is enabled for Lines in range 0 to 31 + * @rmtoll FTSR1 FTx LL_EXTI_IsEnabledFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->FTSR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Check if falling edge trigger is enabled for Lines in range 32 to 63 + * @rmtoll FTSR2 FTx LL_EXTI_IsEnabledFallingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->FTSR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} +#endif /* STM32G0C1xx || STM32G0B1xx */ +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management + * @{ + */ + +/** + * @brief Generate a software Interrupt Event for Lines in range 0 to 31 + * @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to + * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR + * resulting in an interrupt request generation. + * This bit is cleared by clearing the corresponding bit in the EXTI_PR + * register (by writing a 1 into the bit) + * @rmtoll SWIER1 SWIx LL_EXTI_GenerateSWI_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->SWIER1, ExtiLine); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Generate a software Interrupt Event for Lines in range 32 to 63 + * @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to + * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR + * resulting in an interrupt request generation. + * This bit is cleared by clearing the corresponding bit in the EXTI_PR + * register (by writing a 1 into the bit) + * @rmtoll SWIER2 SWIx LL_EXTI_GenerateSWI_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_GenerateSWI_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->SWIER2, ExtiLine); +} +#endif /* STM32G0C1xx || STM32G0B1xx */ + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management + * @{ + */ + +/** + * @brief Check if the ExtLine Falling Flag is set or not for Lines in range 0 to 31 + * @note This bit is set when the falling edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll FPR1 FPIFx LL_EXTI_IsActiveFallingFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveFallingFlag_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->FPR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Check if the ExtLine Falling Flag is set or not for Lines in range 32 to 63 + * @note This bit is set when the falling edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll FPR2 FPIFx LL_EXTI_IsActiveFallingFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveFallingFlag_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->FPR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} +#endif /* STM32G0C1xx || STM32G0B1xx */ + +/** + * @brief Read ExtLine Combination Falling Flag for Lines in range 0 to 31 + * @note This bit is set when the falling edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll FPR1 FPIFx LL_EXTI_ReadFallingFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadFallingFlag_0_31(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->FPR1, ExtiLine)); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Read ExtLine Combination Falling Flag for Lines in range 32 to 63 + * @note This bit is set when the falling edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll FPR2 FPIFx LL_EXTI_ReadFallingFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadFallingFlag_32_63(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->FPR2, ExtiLine)); +} +#endif /* STM32G0C1xx || STM32G0B1xx */ + +/** + * @brief Clear ExtLine Falling Flags for Lines in range 0 to 31 + * @note This bit is set when the falling edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll FPR1 FPIFx LL_EXTI_ClearFallingFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearFallingFlag_0_31(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->FPR1, ExtiLine); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Clear ExtLine Falling Flags for Lines in range 32 to 63 + * @note This bit is set when the falling edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll FPR2 FPIFx LL_EXTI_ClearFallingFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearFallingFlag_32_63(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->FPR2, ExtiLine); +} +#endif /* STM32G0C1xx || STM32G0B1xx */ + +/** + * @brief Check if the ExtLine Rising Flag is set or not for Lines in range 0 to 31 + * @note This bit is set when the Rising edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll RPR1 RPIFx LL_EXTI_IsActiveRisingFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveRisingFlag_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->RPR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Check if the ExtLine Rising Flag is set or not for Lines in range 32 to 63 + * @note This bit is set when the Rising edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll RPR2 RPIFx LL_EXTI_IsActiveRisingFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveRisingFlag_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->RPR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} +#endif /* STM32G0C1xx || STM32G0B1xx */ + +/** + * @brief Read ExtLine Combination Rising Flag for Lines in range 0 to 31 + * @note This bit is set when the Rising edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll RPR1 RPIFx LL_EXTI_ReadRisingFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadRisingFlag_0_31(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->RPR1, ExtiLine)); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Read ExtLine Combination Rising Flag for Lines in range 32 to 63 + * @note This bit is set when the Rising edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll RPR2 RPIFx LL_EXTI_ReadRisingFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadRisingFlag_32_63(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->RPR2, ExtiLine)); +} +#endif /* STM32G0C1xx || STM32G0B1xx */ + +/** + * @brief Clear ExtLine Rising Flags for Lines in range 0 to 31 + * @note This bit is set when the Rising edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll RPR1 RPIFx LL_EXTI_ClearRisingFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_20 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearRisingFlag_0_31(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->RPR1, ExtiLine); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Clear ExtLine Rising Flags for Lines in range 32 to 63 + * @note This bit is set when the Rising edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll RPR2 RPIFx LL_EXTI_ClearRisingFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearRisingFlag_32_63(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->RPR2, ExtiLine); +} +#endif /* STM32G0C1xx || STM32G0B1xx */ + +/** + * @} + */ +/** @defgroup EXTI_LL_EF_Config EF configuration functions + * @{ + */ + +/** + * @brief Configure source input for the EXTI external interrupt. + * @rmtoll EXTI_EXTICR1 EXTI0 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR1 EXTI1 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR1 EXTI2 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR1 EXTI3 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI4 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI5 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI6 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI7 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI8 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI9 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI10 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI11 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI12 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI13 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI14 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI15 LL_EXTI_SetEXTISource + * @param Port This parameter can be one of the following values: + * @arg @ref EXTI_LL_EC_CONFIG_PORT + * + * (*) value not defined in all devices + * @param Line This parameter can be one of the following values: + * @arg @ref LL_EXTI_CONFIG_LINE0 + * @arg @ref LL_EXTI_CONFIG_LINE1 + * @arg @ref LL_EXTI_CONFIG_LINE2 + * @arg @ref LL_EXTI_CONFIG_LINE3 + * @arg @ref LL_EXTI_CONFIG_LINE4 + * @arg @ref LL_EXTI_CONFIG_LINE5 + * @arg @ref LL_EXTI_CONFIG_LINE6 + * @arg @ref LL_EXTI_CONFIG_LINE7 + * @arg @ref LL_EXTI_CONFIG_LINE8 + * @arg @ref LL_EXTI_CONFIG_LINE9 + * @arg @ref LL_EXTI_CONFIG_LINE10 + * @arg @ref LL_EXTI_CONFIG_LINE11 + * @arg @ref LL_EXTI_CONFIG_LINE12 + * @arg @ref LL_EXTI_CONFIG_LINE13 + * @arg @ref LL_EXTI_CONFIG_LINE14 + * @arg @ref LL_EXTI_CONFIG_LINE15 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_SetEXTISource(uint32_t Port, uint32_t Line) +{ + MODIFY_REG(EXTI->EXTICR[Line & 0x03u], EXTI_EXTICR1_EXTI0 << (Line >> LL_EXTI_REGISTER_PINPOS_SHFT), Port << (Line >> LL_EXTI_REGISTER_PINPOS_SHFT)); +} + +/** + * @brief Get the configured defined for specific EXTI Line + * @rmtoll EXTI_EXTICR1 EXTI0 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR1 EXTI1 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR1 EXTI2 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR1 EXTI3 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI4 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI5 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI6 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI7 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI8 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI9 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI10 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI11 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI12 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI13 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI14 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI15 LL_EXTI_SetEXTISource + * @param Line This parameter can be one of the following values: + * @arg @ref LL_EXTI_CONFIG_LINE0 + * @arg @ref LL_EXTI_CONFIG_LINE1 + * @arg @ref LL_EXTI_CONFIG_LINE2 + * @arg @ref LL_EXTI_CONFIG_LINE3 + * @arg @ref LL_EXTI_CONFIG_LINE4 + * @arg @ref LL_EXTI_CONFIG_LINE5 + * @arg @ref LL_EXTI_CONFIG_LINE6 + * @arg @ref LL_EXTI_CONFIG_LINE7 + * @arg @ref LL_EXTI_CONFIG_LINE8 + * @arg @ref LL_EXTI_CONFIG_LINE9 + * @arg @ref LL_EXTI_CONFIG_LINE10 + * @arg @ref LL_EXTI_CONFIG_LINE11 + * @arg @ref LL_EXTI_CONFIG_LINE12 + * @arg @ref LL_EXTI_CONFIG_LINE13 + * @arg @ref LL_EXTI_CONFIG_LINE14 + * @arg @ref LL_EXTI_CONFIG_LINE15 + * @retval Returned value can be one of the following values: + * @arg @ref EXTI_LL_EC_CONFIG_PORT + * + * (*) value not defined in all devices + */ +__STATIC_INLINE uint32_t LL_EXTI_GetEXTISource(uint32_t Line) +{ + return (READ_BIT(EXTI->EXTICR[Line & 0x03u], (EXTI_EXTICR1_EXTI0 << (Line >> LL_EXTI_REGISTER_PINPOS_SHFT))) >> (Line >> LL_EXTI_REGISTER_PINPOS_SHFT)); +} +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct); +uint32_t LL_EXTI_DeInit(void); +void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct); + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* EXTI */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_EXTI_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_gpio.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_gpio.h new file mode 100644 index 0000000..2b221dd --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_gpio.h @@ -0,0 +1,958 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_GPIO_H +#define STM32G0xx_LL_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) + +/** @defgroup GPIO_LL GPIO + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rules: + * Rule-18.1_d - Medium: Array pointer `GPIOx' is accessed with index [..,..] + * which may be out of array bounds [..,UNKNOWN] in following APIs: + * LL_GPIO_GetAFPin_0_7 + * LL_GPIO_SetAFPin_0_7 + * LL_GPIO_SetAFPin_8_15 + * LL_GPIO_GetAFPin_8_15 + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros + * @{ + */ + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures + * @{ + */ + +/** + * @brief LL GPIO Init Structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_LL_EC_PIN */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_MODE. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_SPEED. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/ + + uint32_t OutputType; /*!< Specifies the operating output type for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_OUTPUT. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/ + + uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_PULL. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/ + + uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_AF. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/ +} LL_GPIO_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants + * @{ + */ + +/** @defgroup GPIO_LL_EC_PIN PIN + * @{ + */ +#define LL_GPIO_PIN_0 GPIO_BSRR_BS0 /*!< Select pin 0 */ +#define LL_GPIO_PIN_1 GPIO_BSRR_BS1 /*!< Select pin 1 */ +#define LL_GPIO_PIN_2 GPIO_BSRR_BS2 /*!< Select pin 2 */ +#define LL_GPIO_PIN_3 GPIO_BSRR_BS3 /*!< Select pin 3 */ +#define LL_GPIO_PIN_4 GPIO_BSRR_BS4 /*!< Select pin 4 */ +#define LL_GPIO_PIN_5 GPIO_BSRR_BS5 /*!< Select pin 5 */ +#define LL_GPIO_PIN_6 GPIO_BSRR_BS6 /*!< Select pin 6 */ +#define LL_GPIO_PIN_7 GPIO_BSRR_BS7 /*!< Select pin 7 */ +#define LL_GPIO_PIN_8 GPIO_BSRR_BS8 /*!< Select pin 8 */ +#define LL_GPIO_PIN_9 GPIO_BSRR_BS9 /*!< Select pin 9 */ +#define LL_GPIO_PIN_10 GPIO_BSRR_BS10 /*!< Select pin 10 */ +#define LL_GPIO_PIN_11 GPIO_BSRR_BS11 /*!< Select pin 11 */ +#define LL_GPIO_PIN_12 GPIO_BSRR_BS12 /*!< Select pin 12 */ +#define LL_GPIO_PIN_13 GPIO_BSRR_BS13 /*!< Select pin 13 */ +#define LL_GPIO_PIN_14 GPIO_BSRR_BS14 /*!< Select pin 14 */ +#define LL_GPIO_PIN_15 GPIO_BSRR_BS15 /*!< Select pin 15 */ +#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS0 | GPIO_BSRR_BS1 | GPIO_BSRR_BS2 | \ + GPIO_BSRR_BS3 | GPIO_BSRR_BS4 | GPIO_BSRR_BS5 | \ + GPIO_BSRR_BS6 | GPIO_BSRR_BS7 | GPIO_BSRR_BS8 | \ + GPIO_BSRR_BS9 | GPIO_BSRR_BS10 | GPIO_BSRR_BS11 | \ + GPIO_BSRR_BS12 | GPIO_BSRR_BS13 | GPIO_BSRR_BS14 | \ + GPIO_BSRR_BS15) /*!< Select all pins */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_MODE Mode + * @{ + */ +#define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */ +#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODE0_0 /*!< Select output mode */ +#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODE0_1 /*!< Select alternate function mode */ +#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODE0 /*!< Select analog mode */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_OUTPUT Output Type + * @{ + */ +#define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */ +#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT0 /*!< Select open-drain as output type */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_SPEED Output Speed + * @{ + */ +#define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */ +#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDR_OSPEED0_0 /*!< Select I/O medium output speed */ +#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDR_OSPEED0_1 /*!< Select I/O fast output speed */ +#define LL_GPIO_SPEED_FREQ_VERY_HIGH GPIO_OSPEEDR_OSPEED0 /*!< Select I/O high output speed */ +/** + * @} + */ +#define LL_GPIO_SPEED_LOW LL_GPIO_SPEED_FREQ_LOW +#define LL_GPIO_SPEED_MEDIUM LL_GPIO_SPEED_FREQ_MEDIUM +#define LL_GPIO_SPEED_FAST LL_GPIO_SPEED_FREQ_HIGH +#define LL_GPIO_SPEED_HIGH LL_GPIO_SPEED_FREQ_VERY_HIGH + + +/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down + * @{ + */ +#define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */ +#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPD0_0 /*!< Select I/O pull up */ +#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPD0_1 /*!< Select I/O pull down */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_AF Alternate Function + * @{ + */ +#define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */ +#define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */ +#define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */ +#define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */ +#define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */ +#define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */ +#define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */ +#define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */ +#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx) +#define LL_GPIO_AF_8 (0x0000008U) /*!< Select alternate function 8 */ +#define LL_GPIO_AF_9 (0x0000009U) /*!< Select alternate function 9 */ +#define LL_GPIO_AF_10 (0x000000AU) /*!< Select alternate function 10 */ +#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration + * @{ + */ + +/** + * @brief Configure gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_SetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode) +{ + MODIFY_REG(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODE0), ((Pin * Pin) * Mode)); +} + +/** + * @brief Return gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_GetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODE0)) / (Pin * Pin)); +} + +/** + * @brief Configure gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @param OutputType This parameter can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType) +{ + MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType)); +} + +/** + * @brief Return gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) / Pin); +} + +/** + * @brief Configure gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Speed This parameter can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed) +{ + MODIFY_REG(GPIOx->OSPEEDR, ((Pin * Pin) * GPIO_OSPEEDR_OSPEED0), ((Pin * Pin) * Speed)); +} + +/** + * @brief Return gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OSPEEDR, ((Pin * Pin) * GPIO_OSPEEDR_OSPEED0)) / (Pin * Pin)); +} + +/** + * @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Pull This parameter can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull) +{ + MODIFY_REG(GPIOx->PUPDR, ((Pin * Pin) * GPIO_PUPDR_PUPD0), ((Pin * Pin) * Pull)); +} + +/** + * @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->PUPDR, ((Pin * Pin) * GPIO_PUPDR_PUPD0)) / (Pin * Pin)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @note Possible values are from AF0 to AF7 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[0], ((((Pin * Pin) * Pin) * Pin) * GPIO_AFRL_AFSEL0), + ((((Pin * Pin) * Pin) * Pin) * Alternate)); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[0], + ((((Pin * Pin) * Pin) * Pin) * GPIO_AFRL_AFSEL0)) / (((Pin * Pin) * Pin) * Pin)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF7 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[1], (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * GPIO_AFRH_AFSEL8), + (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * Alternate)); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF7 depending on target. + * @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[1], + (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * GPIO_AFRH_AFSEL8)) / ((((Pin >> 8U) * + (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U))); +} + + +/** + * @brief Lock configuration of several pins for a dedicated port. + * @note When the lock sequence has been applied on a port bit, the + * value of this port bit can no longer be modified until the + * next reset. + * @note Each lock bit freezes a specific configuration register + * (control and alternate function registers). + * @rmtoll LCKR LCKK LL_GPIO_LockPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + __IO uint32_t temp; + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + WRITE_REG(GPIOx->LCKR, PinMask); + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + /* Read LCKK register. This read is mandatory to complete key lock sequence */ + temp = READ_REG(GPIOx->LCKR); + (void) temp; +} + +/** + * @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0. + * @rmtoll LCKR LCKy LL_GPIO_IsPinLocked + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->LCKR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Return 1 if one of the pin of a dedicated port is locked. else return 0. + * @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked + * @param GPIOx GPIO Port + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx) +{ + return ((READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup GPIO_LL_EF_Data_Access Data Access + * @{ + */ + +/** + * @brief Return full input data register value for a dedicated port. + * @rmtoll IDR IDy LL_GPIO_ReadInputPort + * @param GPIOx GPIO Port + * @retval Input data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->IDR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll IDR IDy LL_GPIO_IsInputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->IDR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Write output data register for the port. + * @rmtoll ODR ODy LL_GPIO_WriteOutputPort + * @param GPIOx GPIO Port + * @param PortValue Level value for each pin of the port + * @retval None + */ +__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue) +{ + WRITE_REG(GPIOx->ODR, PortValue); +} + +/** + * @brief Return full output data register value for a dedicated port. + * @rmtoll ODR ODy LL_GPIO_ReadOutputPort + * @param GPIOx GPIO Port + * @retval Output data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->ODR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll ODR ODy LL_GPIO_IsOutputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->ODR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Set several pins to high level on dedicated gpio port. + * @rmtoll BSRR BSy LL_GPIO_SetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BSRR, PinMask); +} + +/** + * @brief Set several pins to low level on dedicated gpio port. + * @rmtoll BRR BRy LL_GPIO_ResetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BRR, PinMask); +} + +/** + * @brief Toggle data value for several pin of dedicated port. + * @rmtoll ODR ODy LL_GPIO_TogglePin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + uint32_t odr = READ_REG(GPIOx->ODR); + WRITE_REG(GPIOx->BSRR, ((odr & PinMask) << 16u) | (~odr & PinMask)); +} + + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx); +ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct); +void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) */ +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_GPIO_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_i2c.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_i2c.h new file mode 100644 index 0000000..4a2b154 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_i2c.h @@ -0,0 +1,2279 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_i2c.h + * @author MCD Application Team + * @brief Header file of I2C LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_I2C_H +#define STM32G0xx_LL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (I2C1) || defined (I2C2) || defined (I2C3) + +/** @defgroup I2C_LL I2C + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_LL_Private_Constants I2C Private Constants + * @{ + */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_Private_Macros I2C Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_ES_INIT I2C Exported Init structure + * @{ + */ +typedef struct +{ + uint32_t PeripheralMode; /*!< Specifies the peripheral mode. + This parameter can be a value of @ref I2C_LL_EC_PERIPHERAL_MODE. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetMode(). */ + + uint32_t Timing; /*!< Specifies the SDA setup, hold time and the SCL high, low period values. + This parameter must be set by referring to the STM32CubeMX Tool and + the helper macro @ref __LL_I2C_CONVERT_TIMINGS(). + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetTiming(). */ + + uint32_t AnalogFilter; /*!< Enables or disables analog noise filter. + This parameter can be a value of @ref I2C_LL_EC_ANALOGFILTER_SELECTION. + + This feature can be modified afterwards using unitary functions + @ref LL_I2C_EnableAnalogFilter() or LL_I2C_DisableAnalogFilter(). */ + + uint32_t DigitalFilter; /*!< Configures the digital noise filter. + This parameter can be a number between Min_Data = 0x00 and Max_Data = 0x0F. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetDigitalFilter(). */ + + uint32_t OwnAddress1; /*!< Specifies the device own address 1. + This parameter must be a value between Min_Data = 0x00 and Max_Data = 0x3FF. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetOwnAddress1(). */ + + uint32_t TypeAcknowledge; /*!< Specifies the ACKnowledge or Non ACKnowledge condition after the address receive + match code or next received byte. + This parameter can be a value of @ref I2C_LL_EC_I2C_ACKNOWLEDGE. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_AcknowledgeNextData(). */ + + uint32_t OwnAddrSize; /*!< Specifies the device own address 1 size (7-bit or 10-bit). + This parameter can be a value of @ref I2C_LL_EC_OWNADDRESS1. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetOwnAddress1(). */ +} LL_I2C_InitTypeDef; +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_I2C_WriteReg function + * @{ + */ +#define LL_I2C_ICR_ADDRCF I2C_ICR_ADDRCF /*!< Address Matched flag */ +#define LL_I2C_ICR_NACKCF I2C_ICR_NACKCF /*!< Not Acknowledge flag */ +#define LL_I2C_ICR_STOPCF I2C_ICR_STOPCF /*!< Stop detection flag */ +#define LL_I2C_ICR_BERRCF I2C_ICR_BERRCF /*!< Bus error flag */ +#define LL_I2C_ICR_ARLOCF I2C_ICR_ARLOCF /*!< Arbitration Lost flag */ +#define LL_I2C_ICR_OVRCF I2C_ICR_OVRCF /*!< Overrun/Underrun flag */ +#define LL_I2C_ICR_PECCF I2C_ICR_PECCF /*!< PEC error flag */ +#define LL_I2C_ICR_TIMOUTCF I2C_ICR_TIMOUTCF /*!< Timeout detection flag */ +#define LL_I2C_ICR_ALERTCF I2C_ICR_ALERTCF /*!< Alert flag */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_I2C_ReadReg function + * @{ + */ +#define LL_I2C_ISR_TXE I2C_ISR_TXE /*!< Transmit data register empty */ +#define LL_I2C_ISR_TXIS I2C_ISR_TXIS /*!< Transmit interrupt status */ +#define LL_I2C_ISR_RXNE I2C_ISR_RXNE /*!< Receive data register not empty */ +#define LL_I2C_ISR_ADDR I2C_ISR_ADDR /*!< Address matched (slave mode) */ +#define LL_I2C_ISR_NACKF I2C_ISR_NACKF /*!< Not Acknowledge received flag */ +#define LL_I2C_ISR_STOPF I2C_ISR_STOPF /*!< Stop detection flag */ +#define LL_I2C_ISR_TC I2C_ISR_TC /*!< Transfer Complete (master mode) */ +#define LL_I2C_ISR_TCR I2C_ISR_TCR /*!< Transfer Complete Reload */ +#define LL_I2C_ISR_BERR I2C_ISR_BERR /*!< Bus error */ +#define LL_I2C_ISR_ARLO I2C_ISR_ARLO /*!< Arbitration lost */ +#define LL_I2C_ISR_OVR I2C_ISR_OVR /*!< Overrun/Underrun (slave mode) */ +#define LL_I2C_ISR_PECERR I2C_ISR_PECERR /*!< PEC Error in reception (SMBus mode) */ +#define LL_I2C_ISR_TIMEOUT I2C_ISR_TIMEOUT /*!< Timeout detection flag (SMBus mode) */ +#define LL_I2C_ISR_ALERT I2C_ISR_ALERT /*!< SMBus alert (SMBus mode) */ +#define LL_I2C_ISR_BUSY I2C_ISR_BUSY /*!< Bus busy */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_I2C_ReadReg and LL_I2C_WriteReg functions + * @{ + */ +#define LL_I2C_CR1_TXIE I2C_CR1_TXIE /*!< TX Interrupt enable */ +#define LL_I2C_CR1_RXIE I2C_CR1_RXIE /*!< RX Interrupt enable */ +#define LL_I2C_CR1_ADDRIE I2C_CR1_ADDRIE /*!< Address match Interrupt enable (slave only) */ +#define LL_I2C_CR1_NACKIE I2C_CR1_NACKIE /*!< Not acknowledge received Interrupt enable */ +#define LL_I2C_CR1_STOPIE I2C_CR1_STOPIE /*!< STOP detection Interrupt enable */ +#define LL_I2C_CR1_TCIE I2C_CR1_TCIE /*!< Transfer Complete interrupt enable */ +#define LL_I2C_CR1_ERRIE I2C_CR1_ERRIE /*!< Error interrupts enable */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_PERIPHERAL_MODE Peripheral Mode + * @{ + */ +#define LL_I2C_MODE_I2C 0x00000000U /*!< I2C Master or Slave mode */ +#define LL_I2C_MODE_SMBUS_HOST I2C_CR1_SMBHEN /*!< SMBus Host address acknowledge */ +#define LL_I2C_MODE_SMBUS_DEVICE 0x00000000U /*!< SMBus Device default mode + (Default address not acknowledge) */ +#define LL_I2C_MODE_SMBUS_DEVICE_ARP I2C_CR1_SMBDEN /*!< SMBus Device Default address acknowledge */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_ANALOGFILTER_SELECTION Analog Filter Selection + * @{ + */ +#define LL_I2C_ANALOGFILTER_ENABLE 0x00000000U /*!< Analog filter is enabled. */ +#define LL_I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF /*!< Analog filter is disabled. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_ADDRESSING_MODE Master Addressing Mode + * @{ + */ +#define LL_I2C_ADDRESSING_MODE_7BIT 0x00000000U /*!< Master operates in 7-bit addressing mode. */ +#define LL_I2C_ADDRESSING_MODE_10BIT I2C_CR2_ADD10 /*!< Master operates in 10-bit addressing mode.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_OWNADDRESS1 Own Address 1 Length + * @{ + */ +#define LL_I2C_OWNADDRESS1_7BIT 0x00000000U /*!< Own address 1 is a 7-bit address. */ +#define LL_I2C_OWNADDRESS1_10BIT I2C_OAR1_OA1MODE /*!< Own address 1 is a 10-bit address.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_OWNADDRESS2 Own Address 2 Masks + * @{ + */ +#define LL_I2C_OWNADDRESS2_NOMASK I2C_OAR2_OA2NOMASK /*!< Own Address2 No mask. */ +#define LL_I2C_OWNADDRESS2_MASK01 I2C_OAR2_OA2MASK01 /*!< Only Address2 bits[7:2] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK02 I2C_OAR2_OA2MASK02 /*!< Only Address2 bits[7:3] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK03 I2C_OAR2_OA2MASK03 /*!< Only Address2 bits[7:4] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK04 I2C_OAR2_OA2MASK04 /*!< Only Address2 bits[7:5] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK05 I2C_OAR2_OA2MASK05 /*!< Only Address2 bits[7:6] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK06 I2C_OAR2_OA2MASK06 /*!< Only Address2 bits[7] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK07 I2C_OAR2_OA2MASK07 /*!< No comparison is done. + All Address2 are acknowledged. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_I2C_ACKNOWLEDGE Acknowledge Generation + * @{ + */ +#define LL_I2C_ACK 0x00000000U /*!< ACK is sent after current received byte. */ +#define LL_I2C_NACK I2C_CR2_NACK /*!< NACK is sent after current received byte.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_ADDRSLAVE Slave Address Length + * @{ + */ +#define LL_I2C_ADDRSLAVE_7BIT 0x00000000U /*!< Slave Address in 7-bit. */ +#define LL_I2C_ADDRSLAVE_10BIT I2C_CR2_ADD10 /*!< Slave Address in 10-bit.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_REQUEST Transfer Request Direction + * @{ + */ +#define LL_I2C_REQUEST_WRITE 0x00000000U /*!< Master request a write transfer. */ +#define LL_I2C_REQUEST_READ I2C_CR2_RD_WRN /*!< Master request a read transfer. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_MODE Transfer End Mode + * @{ + */ +#define LL_I2C_MODE_RELOAD I2C_CR2_RELOAD /*!< Enable I2C Reload mode. */ +#define LL_I2C_MODE_AUTOEND I2C_CR2_AUTOEND /*!< Enable I2C Automatic end mode + with no HW PEC comparison. */ +#define LL_I2C_MODE_SOFTEND 0x00000000U /*!< Enable I2C Software end mode + with no HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_RELOAD LL_I2C_MODE_RELOAD /*!< Enable SMBUS Automatic end mode + with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_AUTOEND_NO_PEC LL_I2C_MODE_AUTOEND /*!< Enable SMBUS Automatic end mode + with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_SOFTEND_NO_PEC LL_I2C_MODE_SOFTEND /*!< Enable SMBUS Software end mode + with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_AUTOEND_WITH_PEC (uint32_t)(LL_I2C_MODE_AUTOEND | I2C_CR2_PECBYTE) +/*!< Enable SMBUS Automatic end mode with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_SOFTEND_WITH_PEC (uint32_t)(LL_I2C_MODE_SOFTEND | I2C_CR2_PECBYTE) +/*!< Enable SMBUS Software end mode with HW PEC comparison. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_GENERATE Start And Stop Generation + * @{ + */ +#define LL_I2C_GENERATE_NOSTARTSTOP 0x00000000U +/*!< Don't Generate Stop and Start condition. */ +#define LL_I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +/*!< Generate Stop condition (Size should be set to 0). */ +#define LL_I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +/*!< Generate Start for read request. */ +#define LL_I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/*!< Generate Start for write request. */ +#define LL_I2C_GENERATE_RESTART_7BIT_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +/*!< Generate Restart for read request, slave 7Bit address. */ +#define LL_I2C_GENERATE_RESTART_7BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/*!< Generate Restart for write request, slave 7Bit address. */ +#define LL_I2C_GENERATE_RESTART_10BIT_READ (uint32_t)(0x80000000U | I2C_CR2_START | \ + I2C_CR2_RD_WRN | I2C_CR2_HEAD10R) +/*!< Generate Restart for read request, slave 10Bit address. */ +#define LL_I2C_GENERATE_RESTART_10BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/*!< Generate Restart for write request, slave 10Bit address.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_DIRECTION Read Write Direction + * @{ + */ +#define LL_I2C_DIRECTION_WRITE 0x00000000U /*!< Write transfer request by master, + slave enters receiver mode. */ +#define LL_I2C_DIRECTION_READ I2C_ISR_DIR /*!< Read transfer request by master, + slave enters transmitter mode.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_I2C_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for + transmission */ +#define LL_I2C_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for + reception */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_SMBUS_TIMEOUTA_MODE SMBus TimeoutA Mode SCL SDA Timeout + * @{ + */ +#define LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW 0x00000000U /*!< TimeoutA is used to detect + SCL low level timeout. */ +#define LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH I2C_TIMEOUTR_TIDLE /*!< TimeoutA is used to detect + both SCL and SDA high level timeout.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_SMBUS_TIMEOUT_SELECTION SMBus Timeout Selection + * @{ + */ +#define LL_I2C_SMBUS_TIMEOUTA I2C_TIMEOUTR_TIMOUTEN /*!< TimeoutA enable bit */ +#define LL_I2C_SMBUS_TIMEOUTB I2C_TIMEOUTR_TEXTEN /*!< TimeoutB (extended clock) + enable bit */ +#define LL_I2C_SMBUS_ALL_TIMEOUT (uint32_t)(I2C_TIMEOUTR_TIMOUTEN | \ + I2C_TIMEOUTR_TEXTEN) /*!< TimeoutA and TimeoutB +(extended clock) enable bits */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @defgroup I2C_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in I2C register + * @param __INSTANCE__ I2C Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_I2C_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in I2C register + * @param __INSTANCE__ I2C Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_I2C_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup I2C_LL_EM_CONVERT_TIMINGS Convert SDA SCL timings + * @{ + */ +/** + * @brief Configure the SDA setup, hold time and the SCL high, low period. + * @param __PRESCALER__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. + * @param __SETUP_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. + (tscldel = (SCLDEL+1)xtpresc) + * @param __HOLD_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. + (tsdadel = SDADELxtpresc) + * @param __SCLH_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + (tsclh = (SCLH+1)xtpresc) + * @param __SCLL_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + (tscll = (SCLL+1)xtpresc) + * @retval Value between Min_Data=0 and Max_Data=0xFFFFFFFF + */ +#define __LL_I2C_CONVERT_TIMINGS(__PRESCALER__, __SETUP_TIME__, __HOLD_TIME__, __SCLH_PERIOD__, __SCLL_PERIOD__) \ + ((((uint32_t)(__PRESCALER__) << I2C_TIMINGR_PRESC_Pos) & I2C_TIMINGR_PRESC) | \ + (((uint32_t)(__SETUP_TIME__) << I2C_TIMINGR_SCLDEL_Pos) & I2C_TIMINGR_SCLDEL) | \ + (((uint32_t)(__HOLD_TIME__) << I2C_TIMINGR_SDADEL_Pos) & I2C_TIMINGR_SDADEL) | \ + (((uint32_t)(__SCLH_PERIOD__) << I2C_TIMINGR_SCLH_Pos) & I2C_TIMINGR_SCLH) | \ + (((uint32_t)(__SCLL_PERIOD__) << I2C_TIMINGR_SCLL_Pos) & I2C_TIMINGR_SCLL)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable I2C peripheral (PE = 1). + * @rmtoll CR1 PE LL_I2C_Enable + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_Enable(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_PE); +} + +/** + * @brief Disable I2C peripheral (PE = 0). + * @note When PE = 0, the I2C SCL and SDA lines are released. + * Internal state machines and status bits are put back to their reset value. + * When cleared, PE must be kept low for at least 3 APB clock cycles. + * @rmtoll CR1 PE LL_I2C_Disable + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_Disable(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_PE); +} + +/** + * @brief Check if the I2C peripheral is enabled or disabled. + * @rmtoll CR1 PE LL_I2C_IsEnabled + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabled(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_PE) == (I2C_CR1_PE)) ? 1UL : 0UL); +} + +/** + * @brief Configure Noise Filters (Analog and Digital). + * @note If the analog filter is also enabled, the digital filter is added to analog filter. + * The filters can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 ANFOFF LL_I2C_ConfigFilters\n + * CR1 DNF LL_I2C_ConfigFilters + * @param I2Cx I2C Instance. + * @param AnalogFilter This parameter can be one of the following values: + * @arg @ref LL_I2C_ANALOGFILTER_ENABLE + * @arg @ref LL_I2C_ANALOGFILTER_DISABLE + * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) + and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk). + * This parameter is used to configure the digital noise filter on SDA and SCL input. + * The digital filter will filter spikes with a length of up to DNF[3:0]*ti2cclk. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ConfigFilters(I2C_TypeDef *I2Cx, uint32_t AnalogFilter, uint32_t DigitalFilter) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_ANFOFF | I2C_CR1_DNF, AnalogFilter | (DigitalFilter << I2C_CR1_DNF_Pos)); +} + +/** + * @brief Configure Digital Noise Filter. + * @note If the analog filter is also enabled, the digital filter is added to analog filter. + * This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 DNF LL_I2C_SetDigitalFilter + * @param I2Cx I2C Instance. + * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) + and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk). + * This parameter is used to configure the digital noise filter on SDA and SCL input. + * The digital filter will filter spikes with a length of up to DNF[3:0]*ti2cclk. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetDigitalFilter(I2C_TypeDef *I2Cx, uint32_t DigitalFilter) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_DNF, DigitalFilter << I2C_CR1_DNF_Pos); +} + +/** + * @brief Get the current Digital Noise Filter configuration. + * @rmtoll CR1 DNF LL_I2C_GetDigitalFilter + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDigitalFilter(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR1, I2C_CR1_DNF) >> I2C_CR1_DNF_Pos); +} + +/** + * @brief Enable Analog Noise Filter. + * @note This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 ANFOFF LL_I2C_EnableAnalogFilter + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAnalogFilter(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ANFOFF); +} + +/** + * @brief Disable Analog Noise Filter. + * @note This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 ANFOFF LL_I2C_DisableAnalogFilter + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAnalogFilter(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ANFOFF); +} + +/** + * @brief Check if Analog Noise Filter is enabled or disabled. + * @rmtoll CR1 ANFOFF LL_I2C_IsEnabledAnalogFilter + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAnalogFilter(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ANFOFF) != (I2C_CR1_ANFOFF)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA transmission requests. + * @rmtoll CR1 TXDMAEN LL_I2C_EnableDMAReq_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableDMAReq_TX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN); +} + +/** + * @brief Disable DMA transmission requests. + * @rmtoll CR1 TXDMAEN LL_I2C_DisableDMAReq_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableDMAReq_TX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN); +} + +/** + * @brief Check if DMA transmission requests are enabled or disabled. + * @rmtoll CR1 TXDMAEN LL_I2C_IsEnabledDMAReq_TX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_TX(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN) == (I2C_CR1_TXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA reception requests. + * @rmtoll CR1 RXDMAEN LL_I2C_EnableDMAReq_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableDMAReq_RX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN); +} + +/** + * @brief Disable DMA reception requests. + * @rmtoll CR1 RXDMAEN LL_I2C_DisableDMAReq_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableDMAReq_RX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN); +} + +/** + * @brief Check if DMA reception requests are enabled or disabled. + * @rmtoll CR1 RXDMAEN LL_I2C_IsEnabledDMAReq_RX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_RX(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN) == (I2C_CR1_RXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll TXDR TXDATA LL_I2C_DMA_GetRegAddr\n + * RXDR RXDATA LL_I2C_DMA_GetRegAddr + * @param I2Cx I2C Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_I2C_DMA_REG_DATA_TRANSMIT + * @arg @ref LL_I2C_DMA_REG_DATA_RECEIVE + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_I2C_DMA_GetRegAddr(const I2C_TypeDef *I2Cx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_I2C_DMA_REG_DATA_TRANSMIT) + { + /* return address of TXDR register */ + data_reg_addr = (uint32_t) &(I2Cx->TXDR); + } + else + { + /* return address of RXDR register */ + data_reg_addr = (uint32_t) &(I2Cx->RXDR); + } + + return data_reg_addr; +} + +/** + * @brief Enable Clock stretching. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 NOSTRETCH LL_I2C_EnableClockStretching + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableClockStretching(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); +} + +/** + * @brief Disable Clock stretching. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 NOSTRETCH LL_I2C_DisableClockStretching + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableClockStretching(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); +} + +/** + * @brief Check if Clock stretching is enabled or disabled. + * @rmtoll CR1 NOSTRETCH LL_I2C_IsEnabledClockStretching + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledClockStretching(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH) != (I2C_CR1_NOSTRETCH)) ? 1UL : 0UL); +} + +/** + * @brief Enable hardware byte control in slave mode. + * @rmtoll CR1 SBC LL_I2C_EnableSlaveByteControl + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSlaveByteControl(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_SBC); +} + +/** + * @brief Disable hardware byte control in slave mode. + * @rmtoll CR1 SBC LL_I2C_DisableSlaveByteControl + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSlaveByteControl(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_SBC); +} + +/** + * @brief Check if hardware byte control in slave mode is enabled or disabled. + * @rmtoll CR1 SBC LL_I2C_IsEnabledSlaveByteControl + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSlaveByteControl(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_SBC) == (I2C_CR1_SBC)) ? 1UL : 0UL); +} + +/** + * @brief Enable Wakeup from STOP. + * @note The macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not + * WakeUpFromStop feature is supported by the I2Cx Instance. + * @note This bit can only be programmed when Digital Filter is disabled. + * @rmtoll CR1 WUPEN LL_I2C_EnableWakeUpFromStop + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableWakeUpFromStop(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_WUPEN); +} + +/** + * @brief Disable Wakeup from STOP. + * @note The macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not + * WakeUpFromStop feature is supported by the I2Cx Instance. + * @rmtoll CR1 WUPEN LL_I2C_DisableWakeUpFromStop + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableWakeUpFromStop(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_WUPEN); +} + +/** + * @brief Check if Wakeup from STOP is enabled or disabled. + * @note The macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not + * WakeUpFromStop feature is supported by the I2Cx Instance. + * @rmtoll CR1 WUPEN LL_I2C_IsEnabledWakeUpFromStop + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledWakeUpFromStop(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_WUPEN) == (I2C_CR1_WUPEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable General Call. + * @note When enabled the Address 0x00 is ACKed. + * @rmtoll CR1 GCEN LL_I2C_EnableGeneralCall + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableGeneralCall(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_GCEN); +} + +/** + * @brief Disable General Call. + * @note When disabled the Address 0x00 is NACKed. + * @rmtoll CR1 GCEN LL_I2C_DisableGeneralCall + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableGeneralCall(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_GCEN); +} + +/** + * @brief Check if General Call is enabled or disabled. + * @rmtoll CR1 GCEN LL_I2C_IsEnabledGeneralCall + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledGeneralCall(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_GCEN) == (I2C_CR1_GCEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the Master to operate in 7-bit or 10-bit addressing mode. + * @note Changing this bit is not allowed, when the START bit is set. + * @rmtoll CR2 ADD10 LL_I2C_SetMasterAddressingMode + * @param I2Cx I2C Instance. + * @param AddressingMode This parameter can be one of the following values: + * @arg @ref LL_I2C_ADDRESSING_MODE_7BIT + * @arg @ref LL_I2C_ADDRESSING_MODE_10BIT + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetMasterAddressingMode(I2C_TypeDef *I2Cx, uint32_t AddressingMode) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_ADD10, AddressingMode); +} + +/** + * @brief Get the Master addressing mode. + * @rmtoll CR2 ADD10 LL_I2C_GetMasterAddressingMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_ADDRESSING_MODE_7BIT + * @arg @ref LL_I2C_ADDRESSING_MODE_10BIT + */ +__STATIC_INLINE uint32_t LL_I2C_GetMasterAddressingMode(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_ADD10)); +} + +/** + * @brief Set the Own Address1. + * @rmtoll OAR1 OA1 LL_I2C_SetOwnAddress1\n + * OAR1 OA1MODE LL_I2C_SetOwnAddress1 + * @param I2Cx I2C Instance. + * @param OwnAddress1 This parameter must be a value between Min_Data=0 and Max_Data=0x3FF. + * @param OwnAddrSize This parameter can be one of the following values: + * @arg @ref LL_I2C_OWNADDRESS1_7BIT + * @arg @ref LL_I2C_OWNADDRESS1_10BIT + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetOwnAddress1(I2C_TypeDef *I2Cx, uint32_t OwnAddress1, uint32_t OwnAddrSize) +{ + MODIFY_REG(I2Cx->OAR1, I2C_OAR1_OA1 | I2C_OAR1_OA1MODE, OwnAddress1 | OwnAddrSize); +} + +/** + * @brief Enable acknowledge on Own Address1 match address. + * @rmtoll OAR1 OA1EN LL_I2C_EnableOwnAddress1 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableOwnAddress1(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN); +} + +/** + * @brief Disable acknowledge on Own Address1 match address. + * @rmtoll OAR1 OA1EN LL_I2C_DisableOwnAddress1 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableOwnAddress1(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN); +} + +/** + * @brief Check if Own Address1 acknowledge is enabled or disabled. + * @rmtoll OAR1 OA1EN LL_I2C_IsEnabledOwnAddress1 + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledOwnAddress1(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN) == (I2C_OAR1_OA1EN)) ? 1UL : 0UL); +} + +/** + * @brief Set the 7bits Own Address2. + * @note This action has no effect if own address2 is enabled. + * @rmtoll OAR2 OA2 LL_I2C_SetOwnAddress2\n + * OAR2 OA2MSK LL_I2C_SetOwnAddress2 + * @param I2Cx I2C Instance. + * @param OwnAddress2 Value between Min_Data=0 and Max_Data=0x7F. + * @param OwnAddrMask This parameter can be one of the following values: + * @arg @ref LL_I2C_OWNADDRESS2_NOMASK + * @arg @ref LL_I2C_OWNADDRESS2_MASK01 + * @arg @ref LL_I2C_OWNADDRESS2_MASK02 + * @arg @ref LL_I2C_OWNADDRESS2_MASK03 + * @arg @ref LL_I2C_OWNADDRESS2_MASK04 + * @arg @ref LL_I2C_OWNADDRESS2_MASK05 + * @arg @ref LL_I2C_OWNADDRESS2_MASK06 + * @arg @ref LL_I2C_OWNADDRESS2_MASK07 + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetOwnAddress2(I2C_TypeDef *I2Cx, uint32_t OwnAddress2, uint32_t OwnAddrMask) +{ + MODIFY_REG(I2Cx->OAR2, I2C_OAR2_OA2 | I2C_OAR2_OA2MSK, OwnAddress2 | OwnAddrMask); +} + +/** + * @brief Enable acknowledge on Own Address2 match address. + * @rmtoll OAR2 OA2EN LL_I2C_EnableOwnAddress2 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableOwnAddress2(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN); +} + +/** + * @brief Disable acknowledge on Own Address2 match address. + * @rmtoll OAR2 OA2EN LL_I2C_DisableOwnAddress2 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableOwnAddress2(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN); +} + +/** + * @brief Check if Own Address1 acknowledge is enabled or disabled. + * @rmtoll OAR2 OA2EN LL_I2C_IsEnabledOwnAddress2 + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledOwnAddress2(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN) == (I2C_OAR2_OA2EN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the SDA setup, hold time and the SCL high, low period. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll TIMINGR TIMINGR LL_I2C_SetTiming + * @param I2Cx I2C Instance. + * @param Timing This parameter must be a value between Min_Data=0 and Max_Data=0xFFFFFFFF. + * @note This parameter is computed with the STM32CubeMX Tool. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetTiming(I2C_TypeDef *I2Cx, uint32_t Timing) +{ + WRITE_REG(I2Cx->TIMINGR, Timing); +} + +/** + * @brief Get the Timing Prescaler setting. + * @rmtoll TIMINGR PRESC LL_I2C_GetTimingPrescaler + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetTimingPrescaler(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_PRESC) >> I2C_TIMINGR_PRESC_Pos); +} + +/** + * @brief Get the SCL low period setting. + * @rmtoll TIMINGR SCLL LL_I2C_GetClockLowPeriod + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetClockLowPeriod(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLL) >> I2C_TIMINGR_SCLL_Pos); +} + +/** + * @brief Get the SCL high period setting. + * @rmtoll TIMINGR SCLH LL_I2C_GetClockHighPeriod + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetClockHighPeriod(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLH) >> I2C_TIMINGR_SCLH_Pos); +} + +/** + * @brief Get the SDA hold time. + * @rmtoll TIMINGR SDADEL LL_I2C_GetDataHoldTime + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDataHoldTime(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SDADEL) >> I2C_TIMINGR_SDADEL_Pos); +} + +/** + * @brief Get the SDA setup time. + * @rmtoll TIMINGR SCLDEL LL_I2C_GetDataSetupTime + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDataSetupTime(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLDEL) >> I2C_TIMINGR_SCLDEL_Pos); +} + +/** + * @brief Configure peripheral mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 SMBHEN LL_I2C_SetMode\n + * CR1 SMBDEN LL_I2C_SetMode + * @param I2Cx I2C Instance. + * @param PeripheralMode This parameter can be one of the following values: + * @arg @ref LL_I2C_MODE_I2C + * @arg @ref LL_I2C_MODE_SMBUS_HOST + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetMode(I2C_TypeDef *I2Cx, uint32_t PeripheralMode) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_SMBHEN | I2C_CR1_SMBDEN, PeripheralMode); +} + +/** + * @brief Get peripheral mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 SMBHEN LL_I2C_GetMode\n + * CR1 SMBDEN LL_I2C_GetMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_MODE_I2C + * @arg @ref LL_I2C_MODE_SMBUS_HOST + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP + */ +__STATIC_INLINE uint32_t LL_I2C_GetMode(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR1, I2C_CR1_SMBHEN | I2C_CR1_SMBDEN)); +} + +/** + * @brief Enable SMBus alert (Host or Device mode) + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note SMBus Device mode: + * - SMBus Alert pin is drived low and + * Alert Response Address Header acknowledge is enabled. + * SMBus Host mode: + * - SMBus Alert pin management is supported. + * @rmtoll CR1 ALERTEN LL_I2C_EnableSMBusAlert + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusAlert(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ALERTEN); +} + +/** + * @brief Disable SMBus alert (Host or Device mode) + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note SMBus Device mode: + * - SMBus Alert pin is not drived (can be used as a standard GPIO) and + * Alert Response Address Header acknowledge is disabled. + * SMBus Host mode: + * - SMBus Alert pin management is not supported. + * @rmtoll CR1 ALERTEN LL_I2C_DisableSMBusAlert + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusAlert(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ALERTEN); +} + +/** + * @brief Check if SMBus alert (Host or Device mode) is enabled or disabled. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 ALERTEN LL_I2C_IsEnabledSMBusAlert + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusAlert(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ALERTEN) == (I2C_CR1_ALERTEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable SMBus Packet Error Calculation (PEC). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PECEN LL_I2C_EnableSMBusPEC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusPEC(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_PECEN); +} + +/** + * @brief Disable SMBus Packet Error Calculation (PEC). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PECEN LL_I2C_DisableSMBusPEC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusPEC(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_PECEN); +} + +/** + * @brief Check if SMBus Packet Error Calculation (PEC) is enabled or disabled. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PECEN LL_I2C_IsEnabledSMBusPEC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPEC(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_PECEN) == (I2C_CR1_PECEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the SMBus Clock Timeout. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This configuration can only be programmed when associated Timeout is disabled (TimeoutA and/orTimeoutB). + * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_ConfigSMBusTimeout\n + * TIMEOUTR TIDLE LL_I2C_ConfigSMBusTimeout\n + * TIMEOUTR TIMEOUTB LL_I2C_ConfigSMBusTimeout + * @param I2Cx I2C Instance. + * @param TimeoutA This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. + * @param TimeoutAMode This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH + * @param TimeoutB + * @retval None + */ +__STATIC_INLINE void LL_I2C_ConfigSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t TimeoutA, uint32_t TimeoutAMode, + uint32_t TimeoutB) +{ + MODIFY_REG(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTA | I2C_TIMEOUTR_TIDLE | I2C_TIMEOUTR_TIMEOUTB, + TimeoutA | TimeoutAMode | (TimeoutB << I2C_TIMEOUTR_TIMEOUTB_Pos)); +} + +/** + * @brief Configure the SMBus Clock TimeoutA (SCL low timeout or SCL and SDA high timeout depends on TimeoutA mode). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note These bits can only be programmed when TimeoutA is disabled. + * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_SetSMBusTimeoutA + * @param I2Cx I2C Instance. + * @param TimeoutA This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSMBusTimeoutA(I2C_TypeDef *I2Cx, uint32_t TimeoutA) +{ + WRITE_REG(I2Cx->TIMEOUTR, TimeoutA); +} + +/** + * @brief Get the SMBus Clock TimeoutA setting. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_GetSMBusTimeoutA + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutA(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTA)); +} + +/** + * @brief Set the SMBus Clock TimeoutA mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This bit can only be programmed when TimeoutA is disabled. + * @rmtoll TIMEOUTR TIDLE LL_I2C_SetSMBusTimeoutAMode + * @param I2Cx I2C Instance. + * @param TimeoutAMode This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSMBusTimeoutAMode(I2C_TypeDef *I2Cx, uint32_t TimeoutAMode) +{ + WRITE_REG(I2Cx->TIMEOUTR, TimeoutAMode); +} + +/** + * @brief Get the SMBus Clock TimeoutA mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIDLE LL_I2C_GetSMBusTimeoutAMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutAMode(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIDLE)); +} + +/** + * @brief Configure the SMBus Extended Cumulative Clock TimeoutB (Master or Slave mode). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note These bits can only be programmed when TimeoutB is disabled. + * @rmtoll TIMEOUTR TIMEOUTB LL_I2C_SetSMBusTimeoutB + * @param I2Cx I2C Instance. + * @param TimeoutB This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSMBusTimeoutB(I2C_TypeDef *I2Cx, uint32_t TimeoutB) +{ + WRITE_REG(I2Cx->TIMEOUTR, TimeoutB << I2C_TIMEOUTR_TIMEOUTB_Pos); +} + +/** + * @brief Get the SMBus Extended Cumulative Clock TimeoutB setting. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMEOUTB LL_I2C_GetSMBusTimeoutB + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutB(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTB) >> I2C_TIMEOUTR_TIMEOUTB_Pos); +} + +/** + * @brief Enable the SMBus Clock Timeout. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_EnableSMBusTimeout\n + * TIMEOUTR TEXTEN LL_I2C_EnableSMBusTimeout + * @param I2Cx I2C Instance. + * @param ClockTimeout This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA + * @arg @ref LL_I2C_SMBUS_TIMEOUTB + * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t ClockTimeout) +{ + SET_BIT(I2Cx->TIMEOUTR, ClockTimeout); +} + +/** + * @brief Disable the SMBus Clock Timeout. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_DisableSMBusTimeout\n + * TIMEOUTR TEXTEN LL_I2C_DisableSMBusTimeout + * @param I2Cx I2C Instance. + * @param ClockTimeout This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA + * @arg @ref LL_I2C_SMBUS_TIMEOUTB + * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t ClockTimeout) +{ + CLEAR_BIT(I2Cx->TIMEOUTR, ClockTimeout); +} + +/** + * @brief Check if the SMBus Clock Timeout is enabled or disabled. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_IsEnabledSMBusTimeout\n + * TIMEOUTR TEXTEN LL_I2C_IsEnabledSMBusTimeout + * @param I2Cx I2C Instance. + * @param ClockTimeout This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA + * @arg @ref LL_I2C_SMBUS_TIMEOUTB + * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusTimeout(const I2C_TypeDef *I2Cx, uint32_t ClockTimeout) +{ + return ((READ_BIT(I2Cx->TIMEOUTR, (I2C_TIMEOUTR_TIMOUTEN | I2C_TIMEOUTR_TEXTEN)) == \ + (ClockTimeout)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable TXIS interrupt. + * @rmtoll CR1 TXIE LL_I2C_EnableIT_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_TX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_TXIE); +} + +/** + * @brief Disable TXIS interrupt. + * @rmtoll CR1 TXIE LL_I2C_DisableIT_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_TX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_TXIE); +} + +/** + * @brief Check if the TXIS Interrupt is enabled or disabled. + * @rmtoll CR1 TXIE LL_I2C_IsEnabledIT_TX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_TX(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_TXIE) == (I2C_CR1_TXIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable RXNE interrupt. + * @rmtoll CR1 RXIE LL_I2C_EnableIT_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_RX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_RXIE); +} + +/** + * @brief Disable RXNE interrupt. + * @rmtoll CR1 RXIE LL_I2C_DisableIT_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_RX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_RXIE); +} + +/** + * @brief Check if the RXNE Interrupt is enabled or disabled. + * @rmtoll CR1 RXIE LL_I2C_IsEnabledIT_RX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_RX(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_RXIE) == (I2C_CR1_RXIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Address match interrupt (slave mode only). + * @rmtoll CR1 ADDRIE LL_I2C_EnableIT_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_ADDR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ADDRIE); +} + +/** + * @brief Disable Address match interrupt (slave mode only). + * @rmtoll CR1 ADDRIE LL_I2C_DisableIT_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_ADDR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ADDRIE); +} + +/** + * @brief Check if Address match interrupt is enabled or disabled. + * @rmtoll CR1 ADDRIE LL_I2C_IsEnabledIT_ADDR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_ADDR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ADDRIE) == (I2C_CR1_ADDRIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Not acknowledge received interrupt. + * @rmtoll CR1 NACKIE LL_I2C_EnableIT_NACK + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_NACK(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_NACKIE); +} + +/** + * @brief Disable Not acknowledge received interrupt. + * @rmtoll CR1 NACKIE LL_I2C_DisableIT_NACK + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_NACK(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_NACKIE); +} + +/** + * @brief Check if Not acknowledge received interrupt is enabled or disabled. + * @rmtoll CR1 NACKIE LL_I2C_IsEnabledIT_NACK + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_NACK(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_NACKIE) == (I2C_CR1_NACKIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable STOP detection interrupt. + * @rmtoll CR1 STOPIE LL_I2C_EnableIT_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_STOP(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_STOPIE); +} + +/** + * @brief Disable STOP detection interrupt. + * @rmtoll CR1 STOPIE LL_I2C_DisableIT_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_STOP(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_STOPIE); +} + +/** + * @brief Check if STOP detection interrupt is enabled or disabled. + * @rmtoll CR1 STOPIE LL_I2C_IsEnabledIT_STOP + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_STOP(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_STOPIE) == (I2C_CR1_STOPIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Transfer Complete interrupt. + * @note Any of these events will generate interrupt : + * Transfer Complete (TC) + * Transfer Complete Reload (TCR) + * @rmtoll CR1 TCIE LL_I2C_EnableIT_TC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_TC(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_TCIE); +} + +/** + * @brief Disable Transfer Complete interrupt. + * @note Any of these events will generate interrupt : + * Transfer Complete (TC) + * Transfer Complete Reload (TCR) + * @rmtoll CR1 TCIE LL_I2C_DisableIT_TC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_TC(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_TCIE); +} + +/** + * @brief Check if Transfer Complete interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_I2C_IsEnabledIT_TC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_TC(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_TCIE) == (I2C_CR1_TCIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Error interrupts. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note Any of these errors will generate interrupt : + * Arbitration Loss (ARLO) + * Bus Error detection (BERR) + * Overrun/Underrun (OVR) + * SMBus Timeout detection (TIMEOUT) + * SMBus PEC error detection (PECERR) + * SMBus Alert pin event detection (ALERT) + * @rmtoll CR1 ERRIE LL_I2C_EnableIT_ERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_ERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ERRIE); +} + +/** + * @brief Disable Error interrupts. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note Any of these errors will generate interrupt : + * Arbitration Loss (ARLO) + * Bus Error detection (BERR) + * Overrun/Underrun (OVR) + * SMBus Timeout detection (TIMEOUT) + * SMBus PEC error detection (PECERR) + * SMBus Alert pin event detection (ALERT) + * @rmtoll CR1 ERRIE LL_I2C_DisableIT_ERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_ERR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ERRIE); +} + +/** + * @brief Check if Error interrupts are enabled or disabled. + * @rmtoll CR1 ERRIE LL_I2C_IsEnabledIT_ERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_ERR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ERRIE) == (I2C_CR1_ERRIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_FLAG_management FLAG_management + * @{ + */ + +/** + * @brief Indicate the status of Transmit data register empty flag. + * @note RESET: When next data is written in Transmit data register. + * SET: When Transmit data register is empty. + * @rmtoll ISR TXE LL_I2C_IsActiveFlag_TXE + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TXE(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TXE) == (I2C_ISR_TXE)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Transmit interrupt flag. + * @note RESET: When next data is written in Transmit data register. + * SET: When Transmit data register is empty. + * @rmtoll ISR TXIS LL_I2C_IsActiveFlag_TXIS + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TXIS(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TXIS) == (I2C_ISR_TXIS)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Receive data register not empty flag. + * @note RESET: When Receive data register is read. + * SET: When the received data is copied in Receive data register. + * @rmtoll ISR RXNE LL_I2C_IsActiveFlag_RXNE + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_RXNE(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_RXNE) == (I2C_ISR_RXNE)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Address matched flag (slave mode). + * @note RESET: Clear default value. + * SET: When the received slave address matched with one of the enabled slave address. + * @rmtoll ISR ADDR LL_I2C_IsActiveFlag_ADDR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ADDR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_ADDR) == (I2C_ISR_ADDR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Not Acknowledge received flag. + * @note RESET: Clear default value. + * SET: When a NACK is received after a byte transmission. + * @rmtoll ISR NACKF LL_I2C_IsActiveFlag_NACK + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_NACK(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_NACKF) == (I2C_ISR_NACKF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Stop detection flag. + * @note RESET: Clear default value. + * SET: When a Stop condition is detected. + * @rmtoll ISR STOPF LL_I2C_IsActiveFlag_STOP + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_STOP(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_STOPF) == (I2C_ISR_STOPF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Transfer complete flag (master mode). + * @note RESET: Clear default value. + * SET: When RELOAD=0, AUTOEND=0 and NBYTES date have been transferred. + * @rmtoll ISR TC LL_I2C_IsActiveFlag_TC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TC(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TC) == (I2C_ISR_TC)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Transfer complete flag (master mode). + * @note RESET: Clear default value. + * SET: When RELOAD=1 and NBYTES date have been transferred. + * @rmtoll ISR TCR LL_I2C_IsActiveFlag_TCR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TCR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TCR) == (I2C_ISR_TCR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Bus error flag. + * @note RESET: Clear default value. + * SET: When a misplaced Start or Stop condition is detected. + * @rmtoll ISR BERR LL_I2C_IsActiveFlag_BERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BERR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_BERR) == (I2C_ISR_BERR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Arbitration lost flag. + * @note RESET: Clear default value. + * SET: When arbitration lost. + * @rmtoll ISR ARLO LL_I2C_IsActiveFlag_ARLO + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ARLO(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_ARLO) == (I2C_ISR_ARLO)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Overrun/Underrun flag (slave mode). + * @note RESET: Clear default value. + * SET: When an overrun/underrun error occurs (Clock Stretching Disabled). + * @rmtoll ISR OVR LL_I2C_IsActiveFlag_OVR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_OVR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_OVR) == (I2C_ISR_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of SMBus PEC error flag in reception. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: Clear default value. + * SET: When the received PEC does not match with the PEC register content. + * @rmtoll ISR PECERR LL_I2C_IsActiveSMBusFlag_PECERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_PECERR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_PECERR) == (I2C_ISR_PECERR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of SMBus Timeout detection flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: Clear default value. + * SET: When a timeout or extended clock timeout occurs. + * @rmtoll ISR TIMEOUT LL_I2C_IsActiveSMBusFlag_TIMEOUT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_TIMEOUT(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TIMEOUT) == (I2C_ISR_TIMEOUT)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of SMBus alert flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: Clear default value. + * SET: When SMBus host configuration, SMBus alert enabled and + * a falling edge event occurs on SMBA pin. + * @rmtoll ISR ALERT LL_I2C_IsActiveSMBusFlag_ALERT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_ALERT(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_ALERT) == (I2C_ISR_ALERT)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Bus Busy flag. + * @note RESET: Clear default value. + * SET: When a Start condition is detected. + * @rmtoll ISR BUSY LL_I2C_IsActiveFlag_BUSY + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BUSY(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_BUSY) == (I2C_ISR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Clear Address Matched flag. + * @rmtoll ICR ADDRCF LL_I2C_ClearFlag_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_ADDR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_ADDRCF); +} + +/** + * @brief Clear Not Acknowledge flag. + * @rmtoll ICR NACKCF LL_I2C_ClearFlag_NACK + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_NACK(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_NACKCF); +} + +/** + * @brief Clear Stop detection flag. + * @rmtoll ICR STOPCF LL_I2C_ClearFlag_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_STOP(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_STOPCF); +} + +/** + * @brief Clear Transmit data register empty flag (TXE). + * @note This bit can be clear by software in order to flush the transmit data register (TXDR). + * @rmtoll ISR TXE LL_I2C_ClearFlag_TXE + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_TXE(I2C_TypeDef *I2Cx) +{ + WRITE_REG(I2Cx->ISR, I2C_ISR_TXE); +} + +/** + * @brief Clear Bus error flag. + * @rmtoll ICR BERRCF LL_I2C_ClearFlag_BERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_BERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_BERRCF); +} + +/** + * @brief Clear Arbitration lost flag. + * @rmtoll ICR ARLOCF LL_I2C_ClearFlag_ARLO + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_ARLO(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_ARLOCF); +} + +/** + * @brief Clear Overrun/Underrun flag. + * @rmtoll ICR OVRCF LL_I2C_ClearFlag_OVR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_OVR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_OVRCF); +} + +/** + * @brief Clear SMBus PEC error flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll ICR PECCF LL_I2C_ClearSMBusFlag_PECERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_PECERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_PECCF); +} + +/** + * @brief Clear SMBus Timeout detection flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll ICR TIMOUTCF LL_I2C_ClearSMBusFlag_TIMEOUT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_TIMEOUT(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_TIMOUTCF); +} + +/** + * @brief Clear SMBus Alert flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll ICR ALERTCF LL_I2C_ClearSMBusFlag_ALERT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_ALERT(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_ALERTCF); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Enable automatic STOP condition generation (master mode). + * @note Automatic end mode : a STOP condition is automatically sent when NBYTES data are transferred. + * This bit has no effect in slave mode or when RELOAD bit is set. + * @rmtoll CR2 AUTOEND LL_I2C_EnableAutoEndMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAutoEndMode(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_AUTOEND); +} + +/** + * @brief Disable automatic STOP condition generation (master mode). + * @note Software end mode : TC flag is set when NBYTES data are transferre, stretching SCL low. + * @rmtoll CR2 AUTOEND LL_I2C_DisableAutoEndMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAutoEndMode(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_AUTOEND); +} + +/** + * @brief Check if automatic STOP condition is enabled or disabled. + * @rmtoll CR2 AUTOEND LL_I2C_IsEnabledAutoEndMode + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAutoEndMode(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_AUTOEND) == (I2C_CR2_AUTOEND)) ? 1UL : 0UL); +} + +/** + * @brief Enable reload mode (master mode). + * @note The transfer is not completed after the NBYTES data transfer, NBYTES will be reloaded when TCR flag is set. + * @rmtoll CR2 RELOAD LL_I2C_EnableReloadMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableReloadMode(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_RELOAD); +} + +/** + * @brief Disable reload mode (master mode). + * @note The transfer is completed after the NBYTES data transfer(STOP or RESTART will follow). + * @rmtoll CR2 RELOAD LL_I2C_DisableReloadMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableReloadMode(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_RELOAD); +} + +/** + * @brief Check if reload mode is enabled or disabled. + * @rmtoll CR2 RELOAD LL_I2C_IsEnabledReloadMode + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledReloadMode(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_RELOAD) == (I2C_CR2_RELOAD)) ? 1UL : 0UL); +} + +/** + * @brief Configure the number of bytes for transfer. + * @note Changing these bits when START bit is set is not allowed. + * @rmtoll CR2 NBYTES LL_I2C_SetTransferSize + * @param I2Cx I2C Instance. + * @param TransferSize This parameter must be a value between Min_Data=0x00 and Max_Data=0xFF. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetTransferSize(I2C_TypeDef *I2Cx, uint32_t TransferSize) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_NBYTES, TransferSize << I2C_CR2_NBYTES_Pos); +} + +/** + * @brief Get the number of bytes configured for transfer. + * @rmtoll CR2 NBYTES LL_I2C_GetTransferSize + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferSize(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_NBYTES) >> I2C_CR2_NBYTES_Pos); +} + +/** + * @brief Prepare the generation of a ACKnowledge or Non ACKnowledge condition after the address receive match code + or next received byte. + * @note Usage in Slave mode only. + * @rmtoll CR2 NACK LL_I2C_AcknowledgeNextData + * @param I2Cx I2C Instance. + * @param TypeAcknowledge This parameter can be one of the following values: + * @arg @ref LL_I2C_ACK + * @arg @ref LL_I2C_NACK + * @retval None + */ +__STATIC_INLINE void LL_I2C_AcknowledgeNextData(I2C_TypeDef *I2Cx, uint32_t TypeAcknowledge) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_NACK, TypeAcknowledge); +} + +/** + * @brief Generate a START or RESTART condition + * @note The START bit can be set even if bus is BUSY or I2C is in slave mode. + * This action has no effect when RELOAD is set. + * @rmtoll CR2 START LL_I2C_GenerateStartCondition + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_GenerateStartCondition(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_START); +} + +/** + * @brief Generate a STOP condition after the current byte transfer (master mode). + * @rmtoll CR2 STOP LL_I2C_GenerateStopCondition + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_GenerateStopCondition(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_STOP); +} + +/** + * @brief Enable automatic RESTART Read request condition for 10bit address header (master mode). + * @note The master sends the complete 10bit slave address read sequence : + * Start + 2 bytes 10bit address in Write direction + Restart + first 7 bits of 10bit address + in Read direction. + * @rmtoll CR2 HEAD10R LL_I2C_EnableAuto10BitRead + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAuto10BitRead(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_HEAD10R); +} + +/** + * @brief Disable automatic RESTART Read request condition for 10bit address header (master mode). + * @note The master only sends the first 7 bits of 10bit address in Read direction. + * @rmtoll CR2 HEAD10R LL_I2C_DisableAuto10BitRead + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAuto10BitRead(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_HEAD10R); +} + +/** + * @brief Check if automatic RESTART Read request condition for 10bit address header is enabled or disabled. + * @rmtoll CR2 HEAD10R LL_I2C_IsEnabledAuto10BitRead + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAuto10BitRead(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_HEAD10R) != (I2C_CR2_HEAD10R)) ? 1UL : 0UL); +} + +/** + * @brief Configure the transfer direction (master mode). + * @note Changing these bits when START bit is set is not allowed. + * @rmtoll CR2 RD_WRN LL_I2C_SetTransferRequest + * @param I2Cx I2C Instance. + * @param TransferRequest This parameter can be one of the following values: + * @arg @ref LL_I2C_REQUEST_WRITE + * @arg @ref LL_I2C_REQUEST_READ + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetTransferRequest(I2C_TypeDef *I2Cx, uint32_t TransferRequest) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_RD_WRN, TransferRequest); +} + +/** + * @brief Get the transfer direction requested (master mode). + * @rmtoll CR2 RD_WRN LL_I2C_GetTransferRequest + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_REQUEST_WRITE + * @arg @ref LL_I2C_REQUEST_READ + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferRequest(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_RD_WRN)); +} + +/** + * @brief Configure the slave address for transfer (master mode). + * @note Changing these bits when START bit is set is not allowed. + * @rmtoll CR2 SADD LL_I2C_SetSlaveAddr + * @param I2Cx I2C Instance. + * @param SlaveAddr This parameter must be a value between Min_Data=0x00 and Max_Data=0x3F. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSlaveAddr(I2C_TypeDef *I2Cx, uint32_t SlaveAddr) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_SADD, SlaveAddr); +} + +/** + * @brief Get the slave address programmed for transfer. + * @rmtoll CR2 SADD LL_I2C_GetSlaveAddr + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0x3F + */ +__STATIC_INLINE uint32_t LL_I2C_GetSlaveAddr(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_SADD)); +} + +/** + * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). + * @rmtoll CR2 SADD LL_I2C_HandleTransfer\n + * CR2 ADD10 LL_I2C_HandleTransfer\n + * CR2 RD_WRN LL_I2C_HandleTransfer\n + * CR2 START LL_I2C_HandleTransfer\n + * CR2 STOP LL_I2C_HandleTransfer\n + * CR2 RELOAD LL_I2C_HandleTransfer\n + * CR2 NBYTES LL_I2C_HandleTransfer\n + * CR2 AUTOEND LL_I2C_HandleTransfer\n + * CR2 HEAD10R LL_I2C_HandleTransfer + * @param I2Cx I2C Instance. + * @param SlaveAddr Specifies the slave address to be programmed. + * @param SlaveAddrSize This parameter can be one of the following values: + * @arg @ref LL_I2C_ADDRSLAVE_7BIT + * @arg @ref LL_I2C_ADDRSLAVE_10BIT + * @param TransferSize Specifies the number of bytes to be programmed. + * This parameter must be a value between Min_Data=0 and Max_Data=255. + * @param EndMode This parameter can be one of the following values: + * @arg @ref LL_I2C_MODE_RELOAD + * @arg @ref LL_I2C_MODE_AUTOEND + * @arg @ref LL_I2C_MODE_SOFTEND + * @arg @ref LL_I2C_MODE_SMBUS_RELOAD + * @arg @ref LL_I2C_MODE_SMBUS_AUTOEND_NO_PEC + * @arg @ref LL_I2C_MODE_SMBUS_SOFTEND_NO_PEC + * @arg @ref LL_I2C_MODE_SMBUS_AUTOEND_WITH_PEC + * @arg @ref LL_I2C_MODE_SMBUS_SOFTEND_WITH_PEC + * @param Request This parameter can be one of the following values: + * @arg @ref LL_I2C_GENERATE_NOSTARTSTOP + * @arg @ref LL_I2C_GENERATE_STOP + * @arg @ref LL_I2C_GENERATE_START_READ + * @arg @ref LL_I2C_GENERATE_START_WRITE + * @arg @ref LL_I2C_GENERATE_RESTART_7BIT_READ + * @arg @ref LL_I2C_GENERATE_RESTART_7BIT_WRITE + * @arg @ref LL_I2C_GENERATE_RESTART_10BIT_READ + * @arg @ref LL_I2C_GENERATE_RESTART_10BIT_WRITE + * @retval None + */ +__STATIC_INLINE void LL_I2C_HandleTransfer(I2C_TypeDef *I2Cx, uint32_t SlaveAddr, uint32_t SlaveAddrSize, + uint32_t TransferSize, uint32_t EndMode, uint32_t Request) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp = ((uint32_t)(((uint32_t)SlaveAddr & I2C_CR2_SADD) | \ + ((uint32_t)SlaveAddrSize & I2C_CR2_ADD10) | \ + (((uint32_t)TransferSize << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \ + (uint32_t)EndMode | (uint32_t)Request) & (~0x80000000U)); + + /* update CR2 register */ + MODIFY_REG(I2Cx->CR2, I2C_CR2_SADD | I2C_CR2_ADD10 | + (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | + I2C_CR2_START | I2C_CR2_STOP | I2C_CR2_RELOAD | + I2C_CR2_NBYTES | I2C_CR2_AUTOEND | I2C_CR2_HEAD10R, + tmp); +} + +/** + * @brief Indicate the value of transfer direction (slave mode). + * @note RESET: Write transfer, Slave enters in receiver mode. + * SET: Read transfer, Slave enters in transmitter mode. + * @rmtoll ISR DIR LL_I2C_GetTransferDirection + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_DIRECTION_WRITE + * @arg @ref LL_I2C_DIRECTION_READ + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferDirection(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->ISR, I2C_ISR_DIR)); +} + +/** + * @brief Return the slave matched address. + * @rmtoll ISR ADDCODE LL_I2C_GetAddressMatchCode + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0x3F + */ +__STATIC_INLINE uint32_t LL_I2C_GetAddressMatchCode(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->ISR, I2C_ISR_ADDCODE) >> I2C_ISR_ADDCODE_Pos << 1); +} + +/** + * @brief Enable internal comparison of the SMBus Packet Error byte (transmission or reception mode). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This feature is cleared by hardware when the PEC byte is transferred, or when a STOP condition + or an Address Matched is received. + * This bit has no effect when RELOAD bit is set. + * This bit has no effect in device mode when SBC bit is not set. + * @rmtoll CR2 PECBYTE LL_I2C_EnableSMBusPECCompare + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusPECCompare(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_PECBYTE); +} + +/** + * @brief Check if the SMBus Packet Error byte internal comparison is requested or not. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR2 PECBYTE LL_I2C_IsEnabledSMBusPECCompare + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPECCompare(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_PECBYTE) == (I2C_CR2_PECBYTE)) ? 1UL : 0UL); +} + +/** + * @brief Get the SMBus Packet Error byte calculated. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll PECR PEC LL_I2C_GetSMBusPEC + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusPEC(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->PECR, I2C_PECR_PEC)); +} + +/** + * @brief Read Receive Data register. + * @rmtoll RXDR RXDATA LL_I2C_ReceiveData8 + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_I2C_ReceiveData8(const I2C_TypeDef *I2Cx) +{ + return (uint8_t)(READ_BIT(I2Cx->RXDR, I2C_RXDR_RXDATA)); +} + +/** + * @brief Write in Transmit Data Register . + * @rmtoll TXDR TXDATA LL_I2C_TransmitData8 + * @param I2Cx I2C Instance. + * @param Data Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_I2C_TransmitData8(I2C_TypeDef *I2Cx, uint8_t Data) +{ + WRITE_REG(I2Cx->TXDR, Data); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_I2C_Init(I2C_TypeDef *I2Cx, const LL_I2C_InitTypeDef *I2C_InitStruct); +ErrorStatus LL_I2C_DeInit(const I2C_TypeDef *I2Cx); +void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct); + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* I2C1 || I2C2 || I2C3 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_I2C_H */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_lpuart.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_lpuart.h new file mode 100644 index 0000000..1450dda --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_lpuart.h @@ -0,0 +1,2643 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_lpuart.h + * @author MCD Application Team + * @brief Header file of LPUART LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_LPUART_H +#define STM32G0xx_LL_LPUART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (LPUART1) || defined (LPUART2) + +/** @defgroup LPUART_LL LPUART + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup LPUART_LL_Private_Variables LPUART Private Variables + * @{ + */ +/* Array used to get the LPUART prescaler division decimal values versus @ref LPUART_LL_EC_PRESCALER values */ +static const uint16_t LPUART_PRESCALER_TAB[] = +{ + (uint16_t)1, + (uint16_t)2, + (uint16_t)4, + (uint16_t)6, + (uint16_t)8, + (uint16_t)10, + (uint16_t)12, + (uint16_t)16, + (uint16_t)32, + (uint16_t)64, + (uint16_t)128, + (uint16_t)256 +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup LPUART_LL_Private_Constants LPUART Private Constants + * @{ + */ +/* Defines used in Baud Rate related macros and corresponding register setting computation */ +#define LPUART_LPUARTDIV_FREQ_MUL 256U +#define LPUART_BRR_MASK 0x000FFFFFU +#define LPUART_BRR_MIN_VALUE 0x00000300U +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPUART_LL_Private_Macros LPUART Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPUART_LL_ES_INIT LPUART Exported Init structures + * @{ + */ + +/** + * @brief LL LPUART Init Structure definition + */ +typedef struct +{ + uint32_t PrescalerValue; /*!< Specifies the Prescaler to compute the communication baud rate. + This parameter can be a value of @ref LPUART_LL_EC_PRESCALER. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetPrescaler().*/ + + uint32_t BaudRate; /*!< This field defines expected LPUART communication baud rate. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetBaudRate().*/ + + uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref LPUART_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetDataWidth().*/ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref LPUART_LL_EC_STOPBITS. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetStopBitsLength().*/ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref LPUART_LL_EC_PARITY. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetParity().*/ + + uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled. + This parameter can be a value of @ref LPUART_LL_EC_DIRECTION. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetTransferDirection().*/ + + uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled. + This parameter can be a value of @ref LPUART_LL_EC_HWCONTROL. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetHWFlowCtrl().*/ + +} LL_LPUART_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup LPUART_LL_Exported_Constants LPUART Exported Constants + * @{ + */ + +/** @defgroup LPUART_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_LPUART_WriteReg function + * @{ + */ +#define LL_LPUART_ICR_PECF USART_ICR_PECF /*!< Parity error clear flag */ +#define LL_LPUART_ICR_FECF USART_ICR_FECF /*!< Framing error clear flag */ +#define LL_LPUART_ICR_NCF USART_ICR_NECF /*!< Noise error detected clear flag */ +#define LL_LPUART_ICR_ORECF USART_ICR_ORECF /*!< Overrun error clear flag */ +#define LL_LPUART_ICR_IDLECF USART_ICR_IDLECF /*!< Idle line detected clear flag */ +#define LL_LPUART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete clear flag */ +#define LL_LPUART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS clear flag */ +#define LL_LPUART_ICR_CMCF USART_ICR_CMCF /*!< Character match clear flag */ +#define LL_LPUART_ICR_WUCF USART_ICR_WUCF /*!< Wakeup from Stop mode clear flag */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_LPUART_ReadReg function + * @{ + */ +#define LL_LPUART_ISR_PE USART_ISR_PE /*!< Parity error flag */ +#define LL_LPUART_ISR_FE USART_ISR_FE /*!< Framing error flag */ +#define LL_LPUART_ISR_NE USART_ISR_NE /*!< Noise detected flag */ +#define LL_LPUART_ISR_ORE USART_ISR_ORE /*!< Overrun error flag */ +#define LL_LPUART_ISR_IDLE USART_ISR_IDLE /*!< Idle line detected flag */ +#define LL_LPUART_ISR_RXNE_RXFNE USART_ISR_RXNE_RXFNE /*!< Read data register or RX FIFO not empty flag */ +#define LL_LPUART_ISR_TC USART_ISR_TC /*!< Transmission complete flag */ +#define LL_LPUART_ISR_TXE_TXFNF USART_ISR_TXE_TXFNF /*!< Transmit data register empty or TX FIFO Not Full flag*/ +#define LL_LPUART_ISR_CTSIF USART_ISR_CTSIF /*!< CTS interrupt flag */ +#define LL_LPUART_ISR_CTS USART_ISR_CTS /*!< CTS flag */ +#define LL_LPUART_ISR_BUSY USART_ISR_BUSY /*!< Busy flag */ +#define LL_LPUART_ISR_CMF USART_ISR_CMF /*!< Character match flag */ +#define LL_LPUART_ISR_SBKF USART_ISR_SBKF /*!< Send break flag */ +#define LL_LPUART_ISR_RWU USART_ISR_RWU /*!< Receiver wakeup from Mute mode flag */ +#define LL_LPUART_ISR_WUF USART_ISR_WUF /*!< Wakeup from Stop mode flag */ +#define LL_LPUART_ISR_TEACK USART_ISR_TEACK /*!< Transmit enable acknowledge flag */ +#define LL_LPUART_ISR_REACK USART_ISR_REACK /*!< Receive enable acknowledge flag */ +#define LL_LPUART_ISR_TXFE USART_ISR_TXFE /*!< TX FIFO empty flag */ +#define LL_LPUART_ISR_RXFF USART_ISR_RXFF /*!< RX FIFO full flag */ +#define LL_LPUART_ISR_RXFT USART_ISR_RXFT /*!< RX FIFO threshold flag */ +#define LL_LPUART_ISR_TXFT USART_ISR_TXFT /*!< TX FIFO threshold flag */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_LPUART_ReadReg and LL_LPUART_WriteReg functions + * @{ + */ +#define LL_LPUART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */ +#define LL_LPUART_CR1_RXNEIE_RXFNEIE USART_CR1_RXNEIE_RXFNEIE /*!< Read data register and RXFIFO not empty + interrupt enable */ +#define LL_LPUART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */ +#define LL_LPUART_CR1_TXEIE_TXFNFIE USART_CR1_TXEIE_TXFNFIE /*!< Transmit data register empty and TX FIFO + not full interrupt enable */ +#define LL_LPUART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */ +#define LL_LPUART_CR1_CMIE USART_CR1_CMIE /*!< Character match interrupt enable */ +#define LL_LPUART_CR1_TXFEIE USART_CR1_TXFEIE /*!< TX FIFO empty interrupt enable */ +#define LL_LPUART_CR1_RXFFIE USART_CR1_RXFFIE /*!< RX FIFO full interrupt enable */ +#define LL_LPUART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */ +#define LL_LPUART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */ +#define LL_LPUART_CR3_WUFIE USART_CR3_WUFIE /*!< Wakeup from Stop mode interrupt enable */ +#define LL_LPUART_CR3_TXFTIE USART_CR3_TXFTIE /*!< TX FIFO threshold interrupt enable */ +#define LL_LPUART_CR3_RXFTIE USART_CR3_RXFTIE /*!< RX FIFO threshold interrupt enable */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_FIFOTHRESHOLD FIFO Threshold + * @{ + */ +#define LL_LPUART_FIFOTHRESHOLD_1_8 0x00000000U /*!< FIFO reaches 1/8 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_1_4 0x00000001U /*!< FIFO reaches 1/4 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_1_2 0x00000002U /*!< FIFO reaches 1/2 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_3_4 0x00000003U /*!< FIFO reaches 3/4 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_7_8 0x00000004U /*!< FIFO reaches 7/8 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_8_8 0x00000005U /*!< FIFO becomes empty for TX and full for RX */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DIRECTION Direction + * @{ + */ +#define LL_LPUART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */ +#define LL_LPUART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */ +#define LL_LPUART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */ +#define LL_LPUART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_PARITY Parity Control + * @{ + */ +#define LL_LPUART_PARITY_NONE 0x00000000U /*!< Parity control disabled */ +#define LL_LPUART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */ +#define LL_LPUART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_WAKEUP Wakeup + * @{ + */ +#define LL_LPUART_WAKEUP_IDLELINE 0x00000000U /*!< LPUART wake up from Mute mode on Idle Line */ +#define LL_LPUART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< LPUART wake up from Mute mode on Address Mark */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_LPUART_DATAWIDTH_7B USART_CR1_M1 /*!< 7 bits word length : Start bit, 7 data bits, n stop bits */ +#define LL_LPUART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */ +#define LL_LPUART_DATAWIDTH_9B USART_CR1_M0 /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_PRESCALER Clock Source Prescaler + * @{ + */ +#define LL_LPUART_PRESCALER_DIV1 0x00000000U /*!< Input clock not divided */ +#define LL_LPUART_PRESCALER_DIV2 (USART_PRESC_PRESCALER_0) /*!< Input clock divided by 2 */ +#define LL_LPUART_PRESCALER_DIV4 (USART_PRESC_PRESCALER_1) /*!< Input clock divided by 4 */ +#define LL_LPUART_PRESCALER_DIV6 (USART_PRESC_PRESCALER_1 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 6 */ +#define LL_LPUART_PRESCALER_DIV8 (USART_PRESC_PRESCALER_2) /*!< Input clock divided by 8 */ +#define LL_LPUART_PRESCALER_DIV10 (USART_PRESC_PRESCALER_2 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 10 */ +#define LL_LPUART_PRESCALER_DIV12 (USART_PRESC_PRESCALER_2 |\ + USART_PRESC_PRESCALER_1) /*!< Input clock divided by 12 */ +#define LL_LPUART_PRESCALER_DIV16 (USART_PRESC_PRESCALER_2 |\ + USART_PRESC_PRESCALER_1 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 16 */ +#define LL_LPUART_PRESCALER_DIV32 (USART_PRESC_PRESCALER_3) /*!< Input clock divided by 32 */ +#define LL_LPUART_PRESCALER_DIV64 (USART_PRESC_PRESCALER_3 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 64 */ +#define LL_LPUART_PRESCALER_DIV128 (USART_PRESC_PRESCALER_3 |\ + USART_PRESC_PRESCALER_1) /*!< Input clock divided by 128 */ +#define LL_LPUART_PRESCALER_DIV256 (USART_PRESC_PRESCALER_3 |\ + USART_PRESC_PRESCALER_1 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 256 */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_STOPBITS Stop Bits + * @{ + */ +#define LL_LPUART_STOPBITS_1 0x00000000U /*!< 1 stop bit */ +#define LL_LPUART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_TXRX TX RX Pins Swap + * @{ + */ +#define LL_LPUART_TXRX_STANDARD 0x00000000U /*!< TX/RX pins are used as defined in standard pinout */ +#define LL_LPUART_TXRX_SWAPPED (USART_CR2_SWAP) /*!< TX and RX pins functions are swapped. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_RXPIN_LEVEL RX Pin Active Level Inversion + * @{ + */ +#define LL_LPUART_RXPIN_LEVEL_STANDARD 0x00000000U /*!< RX pin signal works using the standard logic levels */ +#define LL_LPUART_RXPIN_LEVEL_INVERTED (USART_CR2_RXINV) /*!< RX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_TXPIN_LEVEL TX Pin Active Level Inversion + * @{ + */ +#define LL_LPUART_TXPIN_LEVEL_STANDARD 0x00000000U /*!< TX pin signal works using the standard logic levels */ +#define LL_LPUART_TXPIN_LEVEL_INVERTED (USART_CR2_TXINV) /*!< TX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_BINARY_LOGIC Binary Data Inversion + * @{ + */ +#define LL_LPUART_BINARY_LOGIC_POSITIVE 0x00000000U /*!< Logical data from the data register are send/received + in positive/direct logic. (1=H, 0=L) */ +#define LL_LPUART_BINARY_LOGIC_NEGATIVE USART_CR2_DATAINV /*!< Logical data from the data register are send/received + in negative/inverse logic. (1=L, 0=H). + The parity bit is also inverted. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_BITORDER Bit Order + * @{ + */ +#define LL_LPUART_BITORDER_LSBFIRST 0x00000000U /*!< data is transmitted/received with data bit 0 first, + following the start bit */ +#define LL_LPUART_BITORDER_MSBFIRST USART_CR2_MSBFIRST /*!< data is transmitted/received with the MSB first, + following the start bit */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_ADDRESS_DETECT Address Length Detection + * @{ + */ +#define LL_LPUART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit address detection method selected */ +#define LL_LPUART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit address detection (in 8-bit data mode) method selected */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_HWCONTROL Hardware Control + * @{ + */ +#define LL_LPUART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */ +#define LL_LPUART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested + when there is space in the receive buffer */ +#define LL_LPUART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted + when the nCTS input is asserted (tied to 0)*/ +#define LL_LPUART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_WAKEUP_ON Wakeup Activation + * @{ + */ +#define LL_LPUART_WAKEUP_ON_ADDRESS 0x00000000U /*!< Wake up active on address match */ +#define LL_LPUART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< Wake up active on Start bit detection */ +#define LL_LPUART_WAKEUP_ON_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1) /*!< Wake up active on RXNE */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DE_POLARITY Driver Enable Polarity + * @{ + */ +#define LL_LPUART_DE_POLARITY_HIGH 0x00000000U /*!< DE signal is active high */ +#define LL_LPUART_DE_POLARITY_LOW USART_CR3_DEP /*!< DE signal is active low */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_LPUART_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */ +#define LL_LPUART_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup LPUART_LL_Exported_Macros LPUART Exported Macros + * @{ + */ + +/** @defgroup LPUART_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in LPUART register + * @param __INSTANCE__ LPUART Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_LPUART_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in LPUART register + * @param __INSTANCE__ LPUART Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_LPUART_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup LPUART_LL_EM_Exported_Macros_Helper Helper Macros + * @{ + */ + +/** + * @brief Compute LPUARTDIV value according to Peripheral Clock and + * expected Baud Rate (20-bit value of LPUARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for LPUART Instance + * @param __PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + * @param __BAUDRATE__ Baud Rate value to achieve + * @retval LPUARTDIV value to be used for BRR register filling + */ +#define __LL_LPUART_DIV(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) (uint32_t)\ + ((((((uint64_t)(__PERIPHCLK__)/(uint64_t)(LPUART_PRESCALER_TAB[(uint16_t)(__PRESCALER__)]))\ + * LPUART_LPUARTDIV_FREQ_MUL) + (uint32_t)((__BAUDRATE__)/2U))/(__BAUDRATE__)) & LPUART_BRR_MASK) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup LPUART_LL_Exported_Functions LPUART Exported Functions + * @{ + */ + +/** @defgroup LPUART_LL_EF_Configuration Configuration functions + * @{ + */ + +/** + * @brief LPUART Enable + * @rmtoll CR1 UE LL_LPUART_Enable + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_Enable(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_UE); +} + +/** + * @brief LPUART Disable + * @note When LPUART is disabled, LPUART prescalers and outputs are stopped immediately, + * and current operations are discarded. The configuration of the LPUART is kept, but all the status + * flags, in the LPUARTx_ISR are set to their default values. + * @note In order to go into low-power mode without generating errors on the line, + * the TE bit must be reset before and the software must wait + * for the TC bit in the LPUART_ISR to be set before resetting the UE bit. + * The DMA requests are also reset when UE = 0 so the DMA channel must + * be disabled before resetting the UE bit. + * @rmtoll CR1 UE LL_LPUART_Disable + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_Disable(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_UE); +} + +/** + * @brief Indicate if LPUART is enabled + * @rmtoll CR1 UE LL_LPUART_IsEnabled + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabled(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_UE) == (USART_CR1_UE)) ? 1UL : 0UL); +} + +/** + * @brief FIFO Mode Enable + * @rmtoll CR1 FIFOEN LL_LPUART_EnableFIFO + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableFIFO(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief FIFO Mode Disable + * @rmtoll CR1 FIFOEN LL_LPUART_DisableFIFO + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableFIFO(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief Indicate if FIFO Mode is enabled + * @rmtoll CR1 FIFOEN LL_LPUART_IsEnabledFIFO + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledFIFO(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_FIFOEN) == (USART_CR1_FIFOEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure TX FIFO Threshold + * @rmtoll CR3 TXFTCFG LL_LPUART_SetTXFIFOThreshold + * @param LPUARTx LPUART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTXFIFOThreshold(USART_TypeDef *LPUARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG, Threshold << USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Return TX FIFO Threshold Configuration + * @rmtoll CR3 TXFTCFG LL_LPUART_GetTXFIFOThreshold + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTXFIFOThreshold(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Configure RX FIFO Threshold + * @rmtoll CR3 RXFTCFG LL_LPUART_SetRXFIFOThreshold + * @param LPUARTx LPUART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetRXFIFOThreshold(USART_TypeDef *LPUARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(LPUARTx->CR3, USART_CR3_RXFTCFG, Threshold << USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Return RX FIFO Threshold Configuration + * @rmtoll CR3 RXFTCFG LL_LPUART_GetRXFIFOThreshold + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetRXFIFOThreshold(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Configure TX and RX FIFOs Threshold + * @rmtoll CR3 TXFTCFG LL_LPUART_ConfigFIFOsThreshold\n + * CR3 RXFTCFG LL_LPUART_ConfigFIFOsThreshold + * @param LPUARTx LPUART Instance + * @param TXThreshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @param RXThreshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ConfigFIFOsThreshold(USART_TypeDef *LPUARTx, uint32_t TXThreshold, uint32_t RXThreshold) +{ + ATOMIC_MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | \ + (RXThreshold << USART_CR3_RXFTCFG_Pos)); +} + +/** + * @brief LPUART enabled in STOP Mode + * @note When this function is enabled, LPUART is able to wake up the MCU from Stop mode, provided that + * LPUART clock selection is HSI or LSE in RCC. + * @rmtoll CR1 UESM LL_LPUART_EnableInStopMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableInStopMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief LPUART disabled in STOP Mode + * @note When this function is disabled, LPUART is not able to wake up the MCU from Stop mode + * @rmtoll CR1 UESM LL_LPUART_DisableInStopMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableInStopMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief Indicate if LPUART is enabled in STOP Mode + * (able to wake up MCU from Stop mode or not) + * @rmtoll CR1 UESM LL_LPUART_IsEnabledInStopMode + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledInStopMode(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_UESM) == (USART_CR1_UESM)) ? 1UL : 0UL); +} + +/** + * @brief Receiver Enable (Receiver is enabled and begins searching for a start bit) + * @rmtoll CR1 RE LL_LPUART_EnableDirectionRx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDirectionRx(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Receiver Disable + * @rmtoll CR1 RE LL_LPUART_DisableDirectionRx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDirectionRx(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Transmitter Enable + * @rmtoll CR1 TE LL_LPUART_EnableDirectionTx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDirectionTx(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Transmitter Disable + * @rmtoll CR1 TE LL_LPUART_DisableDirectionTx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDirectionTx(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Configure simultaneously enabled/disabled states + * of Transmitter and Receiver + * @rmtoll CR1 RE LL_LPUART_SetTransferDirection\n + * CR1 TE LL_LPUART_SetTransferDirection + * @param LPUARTx LPUART Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_LPUART_DIRECTION_NONE + * @arg @ref LL_LPUART_DIRECTION_RX + * @arg @ref LL_LPUART_DIRECTION_TX + * @arg @ref LL_LPUART_DIRECTION_TX_RX + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTransferDirection(USART_TypeDef *LPUARTx, uint32_t TransferDirection) +{ + ATOMIC_MODIFY_REG(LPUARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); +} + +/** + * @brief Return enabled/disabled states of Transmitter and Receiver + * @rmtoll CR1 RE LL_LPUART_GetTransferDirection\n + * CR1 TE LL_LPUART_GetTransferDirection + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_DIRECTION_NONE + * @arg @ref LL_LPUART_DIRECTION_RX + * @arg @ref LL_LPUART_DIRECTION_TX + * @arg @ref LL_LPUART_DIRECTION_TX_RX + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTransferDirection(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_RE | USART_CR1_TE)); +} + +/** + * @brief Configure Parity (enabled/disabled and parity mode if enabled) + * @note This function selects if hardware parity control (generation and detection) is enabled or disabled. + * When the parity control is enabled (Odd or Even), computed parity bit is inserted at the MSB position + * (depending on data width) and parity is checked on the received data. + * @rmtoll CR1 PS LL_LPUART_SetParity\n + * CR1 PCE LL_LPUART_SetParity + * @param LPUARTx LPUART Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_LPUART_PARITY_NONE + * @arg @ref LL_LPUART_PARITY_EVEN + * @arg @ref LL_LPUART_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetParity(USART_TypeDef *LPUARTx, uint32_t Parity) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_PS | USART_CR1_PCE, Parity); +} + +/** + * @brief Return Parity configuration (enabled/disabled and parity mode if enabled) + * @rmtoll CR1 PS LL_LPUART_GetParity\n + * CR1 PCE LL_LPUART_GetParity + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_PARITY_NONE + * @arg @ref LL_LPUART_PARITY_EVEN + * @arg @ref LL_LPUART_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_LPUART_GetParity(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_PS | USART_CR1_PCE)); +} + +/** + * @brief Set Receiver Wake Up method from Mute mode. + * @rmtoll CR1 WAKE LL_LPUART_SetWakeUpMethod + * @param LPUARTx LPUART Instance + * @param Method This parameter can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_IDLELINE + * @arg @ref LL_LPUART_WAKEUP_ADDRESSMARK + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetWakeUpMethod(USART_TypeDef *LPUARTx, uint32_t Method) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_WAKE, Method); +} + +/** + * @brief Return Receiver Wake Up method from Mute mode + * @rmtoll CR1 WAKE LL_LPUART_GetWakeUpMethod + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_IDLELINE + * @arg @ref LL_LPUART_WAKEUP_ADDRESSMARK + */ +__STATIC_INLINE uint32_t LL_LPUART_GetWakeUpMethod(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_WAKE)); +} + +/** + * @brief Set Word length (nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M LL_LPUART_SetDataWidth + * @param LPUARTx LPUART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_LPUART_DATAWIDTH_7B + * @arg @ref LL_LPUART_DATAWIDTH_8B + * @arg @ref LL_LPUART_DATAWIDTH_9B + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDataWidth(USART_TypeDef *LPUARTx, uint32_t DataWidth) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_M, DataWidth); +} + +/** + * @brief Return Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M LL_LPUART_GetDataWidth + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_DATAWIDTH_7B + * @arg @ref LL_LPUART_DATAWIDTH_8B + * @arg @ref LL_LPUART_DATAWIDTH_9B + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDataWidth(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_M)); +} + +/** + * @brief Allow switch between Mute Mode and Active mode + * @rmtoll CR1 MME LL_LPUART_EnableMuteMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableMuteMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Prevent Mute Mode use. Set Receiver in active mode permanently. + * @rmtoll CR1 MME LL_LPUART_DisableMuteMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableMuteMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Indicate if switch between Mute Mode and Active mode is allowed + * @rmtoll CR1 MME LL_LPUART_IsEnabledMuteMode + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledMuteMode(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_MME) == (USART_CR1_MME)) ? 1UL : 0UL); +} + +/** + * @brief Configure Clock source prescaler for baudrate generator and oversampling + * @rmtoll PRESC PRESCALER LL_LPUART_SetPrescaler + * @param LPUARTx LPUART Instance + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetPrescaler(USART_TypeDef *LPUARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(LPUARTx->PRESC, USART_PRESC_PRESCALER, (uint16_t)PrescalerValue); +} + +/** + * @brief Retrieve the Clock source prescaler for baudrate generator and oversampling + * @rmtoll PRESC PRESCALER LL_LPUART_GetPrescaler + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetPrescaler(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->PRESC, USART_PRESC_PRESCALER)); +} + +/** + * @brief Set the length of the stop bits + * @rmtoll CR2 STOP LL_LPUART_SetStopBitsLength + * @param LPUARTx LPUART Instance + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_LPUART_STOPBITS_1 + * @arg @ref LL_LPUART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetStopBitsLength(USART_TypeDef *LPUARTx, uint32_t StopBits) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Retrieve the length of the stop bits + * @rmtoll CR2 STOP LL_LPUART_GetStopBitsLength + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_STOPBITS_1 + * @arg @ref LL_LPUART_STOPBITS_2 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetStopBitsLength(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_STOP)); +} + +/** + * @brief Configure Character frame format (Datawidth, Parity control, Stop Bits) + * @note Call of this function is equivalent to following function call sequence : + * - Data Width configuration using @ref LL_LPUART_SetDataWidth() function + * - Parity Control and mode configuration using @ref LL_LPUART_SetParity() function + * - Stop bits configuration using @ref LL_LPUART_SetStopBitsLength() function + * @rmtoll CR1 PS LL_LPUART_ConfigCharacter\n + * CR1 PCE LL_LPUART_ConfigCharacter\n + * CR1 M LL_LPUART_ConfigCharacter\n + * CR2 STOP LL_LPUART_ConfigCharacter + * @param LPUARTx LPUART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_LPUART_DATAWIDTH_7B + * @arg @ref LL_LPUART_DATAWIDTH_8B + * @arg @ref LL_LPUART_DATAWIDTH_9B + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_LPUART_PARITY_NONE + * @arg @ref LL_LPUART_PARITY_EVEN + * @arg @ref LL_LPUART_PARITY_ODD + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_LPUART_STOPBITS_1 + * @arg @ref LL_LPUART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ConfigCharacter(USART_TypeDef *LPUARTx, uint32_t DataWidth, uint32_t Parity, + uint32_t StopBits) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_PS | USART_CR1_PCE | USART_CR1_M, Parity | DataWidth); + MODIFY_REG(LPUARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Configure TX/RX pins swapping setting. + * @rmtoll CR2 SWAP LL_LPUART_SetTXRXSwap + * @param LPUARTx LPUART Instance + * @param SwapConfig This parameter can be one of the following values: + * @arg @ref LL_LPUART_TXRX_STANDARD + * @arg @ref LL_LPUART_TXRX_SWAPPED + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTXRXSwap(USART_TypeDef *LPUARTx, uint32_t SwapConfig) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_SWAP, SwapConfig); +} + +/** + * @brief Retrieve TX/RX pins swapping configuration. + * @rmtoll CR2 SWAP LL_LPUART_GetTXRXSwap + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_TXRX_STANDARD + * @arg @ref LL_LPUART_TXRX_SWAPPED + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTXRXSwap(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_SWAP)); +} + +/** + * @brief Configure RX pin active level logic + * @rmtoll CR2 RXINV LL_LPUART_SetRXPinLevel + * @param LPUARTx LPUART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_LPUART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_RXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetRXPinLevel(USART_TypeDef *LPUARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_RXINV, PinInvMethod); +} + +/** + * @brief Retrieve RX pin active level logic configuration + * @rmtoll CR2 RXINV LL_LPUART_GetRXPinLevel + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_RXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_LPUART_GetRXPinLevel(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_RXINV)); +} + +/** + * @brief Configure TX pin active level logic + * @rmtoll CR2 TXINV LL_LPUART_SetTXPinLevel + * @param LPUARTx LPUART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_LPUART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_TXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTXPinLevel(USART_TypeDef *LPUARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_TXINV, PinInvMethod); +} + +/** + * @brief Retrieve TX pin active level logic configuration + * @rmtoll CR2 TXINV LL_LPUART_GetTXPinLevel + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_TXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTXPinLevel(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_TXINV)); +} + +/** + * @brief Configure Binary data logic. + * + * @note Allow to define how Logical data from the data register are send/received : + * either in positive/direct logic (1=H, 0=L) or in negative/inverse logic (1=L, 0=H) + * @rmtoll CR2 DATAINV LL_LPUART_SetBinaryDataLogic + * @param LPUARTx LPUART Instance + * @param DataLogic This parameter can be one of the following values: + * @arg @ref LL_LPUART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_LPUART_BINARY_LOGIC_NEGATIVE + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetBinaryDataLogic(USART_TypeDef *LPUARTx, uint32_t DataLogic) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_DATAINV, DataLogic); +} + +/** + * @brief Retrieve Binary data configuration + * @rmtoll CR2 DATAINV LL_LPUART_GetBinaryDataLogic + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_LPUART_BINARY_LOGIC_NEGATIVE + */ +__STATIC_INLINE uint32_t LL_LPUART_GetBinaryDataLogic(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_DATAINV)); +} + +/** + * @brief Configure transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_LPUART_SetTransferBitOrder + * @param LPUARTx LPUART Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_LPUART_BITORDER_LSBFIRST + * @arg @ref LL_LPUART_BITORDER_MSBFIRST + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTransferBitOrder(USART_TypeDef *LPUARTx, uint32_t BitOrder) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_MSBFIRST, BitOrder); +} + +/** + * @brief Return transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_LPUART_GetTransferBitOrder + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_BITORDER_LSBFIRST + * @arg @ref LL_LPUART_BITORDER_MSBFIRST + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTransferBitOrder(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_MSBFIRST)); +} + +/** + * @brief Set Address of the LPUART node. + * @note This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with address mark detection. + * @note 4bits address node is used when 4-bit Address Detection is selected in ADDM7. + * (b7-b4 should be set to 0) + * 8bits address node is used when 7-bit Address Detection is selected in ADDM7. + * (This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with 7-bit address mark detection. + * The MSB of the character sent by the transmitter should be equal to 1. + * It may also be used for character detection during normal reception, + * Mute mode inactive (for example, end of block detection in ModBus protocol). + * In this case, the whole received character (8-bit) is compared to the ADD[7:0] + * value and CMF flag is set on match) + * @rmtoll CR2 ADD LL_LPUART_ConfigNodeAddress\n + * CR2 ADDM7 LL_LPUART_ConfigNodeAddress + * @param LPUARTx LPUART Instance + * @param AddressLen This parameter can be one of the following values: + * @arg @ref LL_LPUART_ADDRESS_DETECT_4B + * @arg @ref LL_LPUART_ADDRESS_DETECT_7B + * @param NodeAddress 4 or 7 bit Address of the LPUART node. + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ConfigNodeAddress(USART_TypeDef *LPUARTx, uint32_t AddressLen, uint32_t NodeAddress) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_ADD | USART_CR2_ADDM7, + (uint32_t)(AddressLen | (NodeAddress << USART_CR2_ADD_Pos))); +} + +/** + * @brief Return 8 bit Address of the LPUART node as set in ADD field of CR2. + * @note If 4-bit Address Detection is selected in ADDM7, + * only 4bits (b3-b0) of returned value are relevant (b31-b4 are not relevant) + * If 7-bit Address Detection is selected in ADDM7, + * only 8bits (b7-b0) of returned value are relevant (b31-b8 are not relevant) + * @rmtoll CR2 ADD LL_LPUART_GetNodeAddress + * @param LPUARTx LPUART Instance + * @retval Address of the LPUART node (Value between Min_Data=0 and Max_Data=255) + */ +__STATIC_INLINE uint32_t LL_LPUART_GetNodeAddress(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_ADD) >> USART_CR2_ADD_Pos); +} + +/** + * @brief Return Length of Node Address used in Address Detection mode (7-bit or 4-bit) + * @rmtoll CR2 ADDM7 LL_LPUART_GetNodeAddressLen + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_ADDRESS_DETECT_4B + * @arg @ref LL_LPUART_ADDRESS_DETECT_7B + */ +__STATIC_INLINE uint32_t LL_LPUART_GetNodeAddressLen(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_ADDM7)); +} + +/** + * @brief Enable RTS HW Flow Control + * @rmtoll CR3 RTSE LL_LPUART_EnableRTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableRTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Disable RTS HW Flow Control + * @rmtoll CR3 RTSE LL_LPUART_DisableRTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableRTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Enable CTS HW Flow Control + * @rmtoll CR3 CTSE LL_LPUART_EnableCTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableCTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Disable CTS HW Flow Control + * @rmtoll CR3 CTSE LL_LPUART_DisableCTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableCTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Configure HW Flow Control mode (both CTS and RTS) + * @rmtoll CR3 RTSE LL_LPUART_SetHWFlowCtrl\n + * CR3 CTSE LL_LPUART_SetHWFlowCtrl + * @param LPUARTx LPUART Instance + * @param HardwareFlowControl This parameter can be one of the following values: + * @arg @ref LL_LPUART_HWCONTROL_NONE + * @arg @ref LL_LPUART_HWCONTROL_RTS + * @arg @ref LL_LPUART_HWCONTROL_CTS + * @arg @ref LL_LPUART_HWCONTROL_RTS_CTS + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetHWFlowCtrl(USART_TypeDef *LPUARTx, uint32_t HardwareFlowControl) +{ + MODIFY_REG(LPUARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE, HardwareFlowControl); +} + +/** + * @brief Return HW Flow Control configuration (both CTS and RTS) + * @rmtoll CR3 RTSE LL_LPUART_GetHWFlowCtrl\n + * CR3 CTSE LL_LPUART_GetHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_HWCONTROL_NONE + * @arg @ref LL_LPUART_HWCONTROL_RTS + * @arg @ref LL_LPUART_HWCONTROL_CTS + * @arg @ref LL_LPUART_HWCONTROL_RTS_CTS + */ +__STATIC_INLINE uint32_t LL_LPUART_GetHWFlowCtrl(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE)); +} + +/** + * @brief Enable Overrun detection + * @rmtoll CR3 OVRDIS LL_LPUART_EnableOverrunDetect + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableOverrunDetect(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Disable Overrun detection + * @rmtoll CR3 OVRDIS LL_LPUART_DisableOverrunDetect + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableOverrunDetect(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Indicate if Overrun detection is enabled + * @rmtoll CR3 OVRDIS LL_LPUART_IsEnabledOverrunDetect + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledOverrunDetect(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_OVRDIS) != USART_CR3_OVRDIS) ? 1UL : 0UL); +} + +/** + * @brief Select event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @rmtoll CR3 WUS LL_LPUART_SetWKUPType + * @param LPUARTx LPUART Instance + * @param Type This parameter can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_ON_ADDRESS + * @arg @ref LL_LPUART_WAKEUP_ON_STARTBIT + * @arg @ref LL_LPUART_WAKEUP_ON_RXNE + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetWKUPType(USART_TypeDef *LPUARTx, uint32_t Type) +{ + MODIFY_REG(LPUARTx->CR3, USART_CR3_WUS, Type); +} + +/** + * @brief Return event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @rmtoll CR3 WUS LL_LPUART_GetWKUPType + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_ON_ADDRESS + * @arg @ref LL_LPUART_WAKEUP_ON_STARTBIT + * @arg @ref LL_LPUART_WAKEUP_ON_RXNE + */ +__STATIC_INLINE uint32_t LL_LPUART_GetWKUPType(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_WUS)); +} + +/** + * @brief Configure LPUART BRR register for achieving expected Baud Rate value. + * + * @note Compute and set LPUARTDIV value in BRR Register (full BRR content) + * according to used Peripheral Clock and expected Baud Rate values + * @note Peripheral clock and Baud Rate values provided as function parameters should be valid + * (Baud rate value != 0). + * @note Provided that LPUARTx_BRR must be > = 0x300 and LPUART_BRR is 20-bit, + * a care should be taken when generating high baud rates using high PeriphClk + * values. PeriphClk must be in the range [3 x BaudRate, 4096 x BaudRate]. + * @rmtoll BRR BRR LL_LPUART_SetBaudRate + * @param LPUARTx LPUART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + * @param BaudRate Baud Rate + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetBaudRate(USART_TypeDef *LPUARTx, uint32_t PeriphClk, uint32_t PrescalerValue, + uint32_t BaudRate) +{ + if (BaudRate != 0U) + { + LPUARTx->BRR = __LL_LPUART_DIV(PeriphClk, PrescalerValue, BaudRate); + } +} + +/** + * @brief Return current Baud Rate value, according to LPUARTDIV present in BRR register + * (full BRR content), and to used Peripheral Clock values + * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned. + * @rmtoll BRR BRR LL_LPUART_GetBaudRate + * @param LPUARTx LPUART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + * @retval Baud Rate + */ +__STATIC_INLINE uint32_t LL_LPUART_GetBaudRate(const USART_TypeDef *LPUARTx, uint32_t PeriphClk, + uint32_t PrescalerValue) +{ + uint32_t lpuartdiv; + uint32_t brrresult; + uint32_t periphclkpresc = (uint32_t)(PeriphClk / (LPUART_PRESCALER_TAB[(uint16_t)PrescalerValue])); + + lpuartdiv = LPUARTx->BRR & LPUART_BRR_MASK; + + if (lpuartdiv >= LPUART_BRR_MIN_VALUE) + { + brrresult = (uint32_t)(((uint64_t)(periphclkpresc) * LPUART_LPUARTDIV_FREQ_MUL) / lpuartdiv); + } + else + { + brrresult = 0x0UL; + } + + return (brrresult); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Configuration_HalfDuplex Configuration functions related to Half Duplex feature + * @{ + */ + +/** + * @brief Enable Single Wire Half-Duplex mode + * @rmtoll CR3 HDSEL LL_LPUART_EnableHalfDuplex + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableHalfDuplex(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Disable Single Wire Half-Duplex mode + * @rmtoll CR3 HDSEL LL_LPUART_DisableHalfDuplex + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableHalfDuplex(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Indicate if Single Wire Half-Duplex mode is enabled + * @rmtoll CR3 HDSEL LL_LPUART_IsEnabledHalfDuplex + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledHalfDuplex(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_HDSEL) == (USART_CR3_HDSEL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Configuration_DE Configuration functions related to Driver Enable feature + * @{ + */ + +/** + * @brief Set DEDT (Driver Enable De-Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @rmtoll CR1 DEDT LL_LPUART_SetDEDeassertionTime + * @param LPUARTx LPUART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDEDeassertionTime(USART_TypeDef *LPUARTx, uint32_t Time) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_DEDT, Time << USART_CR1_DEDT_Pos); +} + +/** + * @brief Return DEDT (Driver Enable De-Assertion Time) + * @rmtoll CR1 DEDT LL_LPUART_GetDEDeassertionTime + * @param LPUARTx LPUART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : c + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDEDeassertionTime(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_DEDT) >> USART_CR1_DEDT_Pos); +} + +/** + * @brief Set DEAT (Driver Enable Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @rmtoll CR1 DEAT LL_LPUART_SetDEAssertionTime + * @param LPUARTx LPUART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDEAssertionTime(USART_TypeDef *LPUARTx, uint32_t Time) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_DEAT, Time << USART_CR1_DEAT_Pos); +} + +/** + * @brief Return DEAT (Driver Enable Assertion Time) + * @rmtoll CR1 DEAT LL_LPUART_GetDEAssertionTime + * @param LPUARTx LPUART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Time Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDEAssertionTime(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_DEAT) >> USART_CR1_DEAT_Pos); +} + +/** + * @brief Enable Driver Enable (DE) Mode + * @rmtoll CR3 DEM LL_LPUART_EnableDEMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDEMode(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Disable Driver Enable (DE) Mode + * @rmtoll CR3 DEM LL_LPUART_DisableDEMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDEMode(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Indicate if Driver Enable (DE) Mode is enabled + * @rmtoll CR3 DEM LL_LPUART_IsEnabledDEMode + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDEMode(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DEM) == (USART_CR3_DEM)) ? 1UL : 0UL); +} + +/** + * @brief Select Driver Enable Polarity + * @rmtoll CR3 DEP LL_LPUART_SetDESignalPolarity + * @param LPUARTx LPUART Instance + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_LPUART_DE_POLARITY_HIGH + * @arg @ref LL_LPUART_DE_POLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDESignalPolarity(USART_TypeDef *LPUARTx, uint32_t Polarity) +{ + MODIFY_REG(LPUARTx->CR3, USART_CR3_DEP, Polarity); +} + +/** + * @brief Return Driver Enable Polarity + * @rmtoll CR3 DEP LL_LPUART_GetDESignalPolarity + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_DE_POLARITY_HIGH + * @arg @ref LL_LPUART_DE_POLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDESignalPolarity(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_DEP)); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if the LPUART Parity Error Flag is set or not + * @rmtoll ISR PE LL_LPUART_IsActiveFlag_PE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_PE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_PE) == (USART_ISR_PE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Framing Error Flag is set or not + * @rmtoll ISR FE LL_LPUART_IsActiveFlag_FE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_FE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_FE) == (USART_ISR_FE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Noise error detected Flag is set or not + * @rmtoll ISR NE LL_LPUART_IsActiveFlag_NE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_NE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_NE) == (USART_ISR_NE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART OverRun Error Flag is set or not + * @rmtoll ISR ORE LL_LPUART_IsActiveFlag_ORE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_ORE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_ORE) == (USART_ISR_ORE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART IDLE line detected Flag is set or not + * @rmtoll ISR IDLE LL_LPUART_IsActiveFlag_IDLE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_IDLE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_IDLE) == (USART_ISR_IDLE)) ? 1UL : 0UL); +} + +#define LL_LPUART_IsActiveFlag_RXNE LL_LPUART_IsActiveFlag_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Check if the LPUART Read Data Register or LPUART RX FIFO Not Empty Flag is set or not + * @rmtoll ISR RXNE_RXFNE LL_LPUART_IsActiveFlag_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RXNE_RXFNE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RXNE_RXFNE) == (USART_ISR_RXNE_RXFNE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Transmission Complete Flag is set or not + * @rmtoll ISR TC LL_LPUART_IsActiveFlag_TC + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TC(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TC) == (USART_ISR_TC)) ? 1UL : 0UL); +} + +#define LL_LPUART_IsActiveFlag_TXE LL_LPUART_IsActiveFlag_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Check if the LPUART Transmit Data Register Empty or LPUART TX FIFO Not Full Flag is set or not + * @rmtoll ISR TXE_TXFNF LL_LPUART_IsActiveFlag_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TXE_TXFNF(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TXE_TXFNF) == (USART_ISR_TXE_TXFNF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART CTS interrupt Flag is set or not + * @rmtoll ISR CTSIF LL_LPUART_IsActiveFlag_nCTS + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_nCTS(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_CTSIF) == (USART_ISR_CTSIF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART CTS Flag is set or not + * @rmtoll ISR CTS LL_LPUART_IsActiveFlag_CTS + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_CTS(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_CTS) == (USART_ISR_CTS)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Busy Flag is set or not + * @rmtoll ISR BUSY LL_LPUART_IsActiveFlag_BUSY + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_BUSY(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_BUSY) == (USART_ISR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Character Match Flag is set or not + * @rmtoll ISR CMF LL_LPUART_IsActiveFlag_CM + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_CM(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_CMF) == (USART_ISR_CMF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Send Break Flag is set or not + * @rmtoll ISR SBKF LL_LPUART_IsActiveFlag_SBK + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_SBK(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_SBKF) == (USART_ISR_SBKF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Receive Wake Up from mute mode Flag is set or not + * @rmtoll ISR RWU LL_LPUART_IsActiveFlag_RWU + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RWU(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RWU) == (USART_ISR_RWU)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Wake Up from stop mode Flag is set or not + * @rmtoll ISR WUF LL_LPUART_IsActiveFlag_WKUP + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_WKUP(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_WUF) == (USART_ISR_WUF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Transmit Enable Acknowledge Flag is set or not + * @rmtoll ISR TEACK LL_LPUART_IsActiveFlag_TEACK + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TEACK(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TEACK) == (USART_ISR_TEACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Receive Enable Acknowledge Flag is set or not + * @rmtoll ISR REACK LL_LPUART_IsActiveFlag_REACK + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_REACK(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_REACK) == (USART_ISR_REACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART TX FIFO Empty Flag is set or not + * @rmtoll ISR TXFE LL_LPUART_IsActiveFlag_TXFE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TXFE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TXFE) == (USART_ISR_TXFE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART RX FIFO Full Flag is set or not + * @rmtoll ISR RXFF LL_LPUART_IsActiveFlag_RXFF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RXFF(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RXFF) == (USART_ISR_RXFF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART TX FIFO Threshold Flag is set or not + * @rmtoll ISR TXFT LL_LPUART_IsActiveFlag_TXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TXFT(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TXFT) == (USART_ISR_TXFT)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART RX FIFO Threshold Flag is set or not + * @rmtoll ISR RXFT LL_LPUART_IsActiveFlag_RXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RXFT(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RXFT) == (USART_ISR_RXFT)) ? 1UL : 0UL); +} + +/** + * @brief Clear Parity Error Flag + * @rmtoll ICR PECF LL_LPUART_ClearFlag_PE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_PE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_PECF); +} + +/** + * @brief Clear Framing Error Flag + * @rmtoll ICR FECF LL_LPUART_ClearFlag_FE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_FE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_FECF); +} + +/** + * @brief Clear Noise detected Flag + * @rmtoll ICR NECF LL_LPUART_ClearFlag_NE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_NE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_NECF); +} + +/** + * @brief Clear OverRun Error Flag + * @rmtoll ICR ORECF LL_LPUART_ClearFlag_ORE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_ORE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_ORECF); +} + +/** + * @brief Clear IDLE line detected Flag + * @rmtoll ICR IDLECF LL_LPUART_ClearFlag_IDLE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_IDLE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_IDLECF); +} + +/** + * @brief Clear Transmission Complete Flag + * @rmtoll ICR TCCF LL_LPUART_ClearFlag_TC + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_TC(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_TCCF); +} + +/** + * @brief Clear CTS Interrupt Flag + * @rmtoll ICR CTSCF LL_LPUART_ClearFlag_nCTS + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_nCTS(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_CTSCF); +} + +/** + * @brief Clear Character Match Flag + * @rmtoll ICR CMCF LL_LPUART_ClearFlag_CM + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_CM(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_CMCF); +} + +/** + * @brief Clear Wake Up from stop mode Flag + * @rmtoll ICR WUCF LL_LPUART_ClearFlag_WKUP + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_WKUP(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_WUCF); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_LPUART_EnableIT_IDLE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_IDLE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_IDLEIE); +} + +#define LL_LPUART_EnableIT_RXNE LL_LPUART_EnableIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Enable RX Not Empty and RX FIFO Not Empty Interrupt + * @rmtoll CR1 RXNEIE_RXFNEIE LL_LPUART_EnableIT_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_RXNE_RXFNE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Enable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_LPUART_EnableIT_TC + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TC(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TCIE); +} + +#define LL_LPUART_EnableIT_TXE LL_LPUART_EnableIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Enable TX Empty and TX FIFO Not Full Interrupt + * @rmtoll CR1 TXEIE_TXFNFIE LL_LPUART_EnableIT_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TXE_TXFNF(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Enable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_LPUART_EnableIT_PE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_PE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Enable Character Match Interrupt + * @rmtoll CR1 CMIE LL_LPUART_EnableIT_CM + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_CM(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Enable TX FIFO Empty Interrupt + * @rmtoll CR1 TXFEIE LL_LPUART_EnableIT_TXFE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TXFE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Enable RX FIFO Full Interrupt + * @rmtoll CR1 RXFFIE LL_LPUART_EnableIT_RXFF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_RXFF(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Enable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register). + * - 0: Interrupt is inhibited + * - 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register. + * @rmtoll CR3 EIE LL_LPUART_EnableIT_ERROR + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_ERROR(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Enable CTS Interrupt + * @rmtoll CR3 CTSIE LL_LPUART_EnableIT_CTS + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_CTS(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Enable Wake Up from Stop Mode Interrupt + * @rmtoll CR3 WUFIE LL_LPUART_EnableIT_WKUP + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_WKUP(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Enable TX FIFO Threshold Interrupt + * @rmtoll CR3 TXFTIE LL_LPUART_EnableIT_TXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TXFT(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Enable RX FIFO Threshold Interrupt + * @rmtoll CR3 RXFTIE LL_LPUART_EnableIT_RXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_RXFT(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Disable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_LPUART_DisableIT_IDLE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_IDLE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_IDLEIE); +} + +#define LL_LPUART_DisableIT_RXNE LL_LPUART_DisableIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Disable RX Not Empty and RX FIFO Not Empty Interrupt + * @rmtoll CR1 RXNEIE_RXFNEIE LL_LPUART_DisableIT_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_RXNE_RXFNE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Disable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_LPUART_DisableIT_TC + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TC(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TCIE); +} + +#define LL_LPUART_DisableIT_TXE LL_LPUART_DisableIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Disable TX Empty and TX FIFO Not Full Interrupt + * @rmtoll CR1 TXEIE_TXFNFIE LL_LPUART_DisableIT_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TXE_TXFNF(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Disable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_LPUART_DisableIT_PE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_PE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Disable Character Match Interrupt + * @rmtoll CR1 CMIE LL_LPUART_DisableIT_CM + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_CM(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Disable TX FIFO Empty Interrupt + * @rmtoll CR1 TXFEIE LL_LPUART_DisableIT_TXFE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TXFE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Disable RX FIFO Full Interrupt + * @rmtoll CR1 RXFFIE LL_LPUART_DisableIT_RXFF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_RXFF(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Disable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register). + * - 0: Interrupt is inhibited + * - 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register. + * @rmtoll CR3 EIE LL_LPUART_DisableIT_ERROR + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_ERROR(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Disable CTS Interrupt + * @rmtoll CR3 CTSIE LL_LPUART_DisableIT_CTS + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_CTS(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Disable Wake Up from Stop Mode Interrupt + * @rmtoll CR3 WUFIE LL_LPUART_DisableIT_WKUP + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_WKUP(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Disable TX FIFO Threshold Interrupt + * @rmtoll CR3 TXFTIE LL_LPUART_DisableIT_TXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TXFT(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Disable RX FIFO Threshold Interrupt + * @rmtoll CR3 RXFTIE LL_LPUART_DisableIT_RXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_RXFT(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Check if the LPUART IDLE Interrupt source is enabled or disabled. + * @rmtoll CR1 IDLEIE LL_LPUART_IsEnabledIT_IDLE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_IDLE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_IDLEIE) == (USART_CR1_IDLEIE)) ? 1UL : 0UL); +} + +#define LL_LPUART_IsEnabledIT_RXNE LL_LPUART_IsEnabledIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Check if the LPUART RX Not Empty and LPUART RX FIFO Not Empty Interrupt is enabled or disabled. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_LPUART_IsEnabledIT_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_RXNE_RXFNE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE) == (USART_CR1_RXNEIE_RXFNEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Transmission Complete Interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_LPUART_IsEnabledIT_TC + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TC(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_TCIE) == (USART_CR1_TCIE)) ? 1UL : 0UL); +} + +#define LL_LPUART_IsEnabledIT_TXE LL_LPUART_IsEnabledIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Check if the LPUART TX Empty and LPUART TX FIFO Not Full Interrupt is enabled or disabled + * @rmtoll CR1 TXEIE_TXFNFIE LL_LPUART_IsEnabledIT_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TXE_TXFNF(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE) == (USART_CR1_TXEIE_TXFNFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Parity Error Interrupt is enabled or disabled. + * @rmtoll CR1 PEIE LL_LPUART_IsEnabledIT_PE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_PE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_PEIE) == (USART_CR1_PEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Character Match Interrupt is enabled or disabled. + * @rmtoll CR1 CMIE LL_LPUART_IsEnabledIT_CM + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_CM(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_CMIE) == (USART_CR1_CMIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART TX FIFO Empty Interrupt is enabled or disabled + * @rmtoll CR1 TXFEIE LL_LPUART_IsEnabledIT_TXFE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TXFE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_TXFEIE) == (USART_CR1_TXFEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART RX FIFO Full Interrupt is enabled or disabled + * @rmtoll CR1 RXFFIE LL_LPUART_IsEnabledIT_RXFF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_RXFF(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_RXFFIE) == (USART_CR1_RXFFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Error Interrupt is enabled or disabled. + * @rmtoll CR3 EIE LL_LPUART_IsEnabledIT_ERROR + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_ERROR(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_EIE) == (USART_CR3_EIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART CTS Interrupt is enabled or disabled. + * @rmtoll CR3 CTSIE LL_LPUART_IsEnabledIT_CTS + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_CTS(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Wake Up from Stop Mode Interrupt is enabled or disabled. + * @rmtoll CR3 WUFIE LL_LPUART_IsEnabledIT_WKUP + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_WKUP(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_WUFIE) == (USART_CR3_WUFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if LPUART TX FIFO Threshold Interrupt is enabled or disabled + * @rmtoll CR3 TXFTIE LL_LPUART_IsEnabledIT_TXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TXFT(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_TXFTIE) == (USART_CR3_TXFTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if LPUART RX FIFO Threshold Interrupt is enabled or disabled + * @rmtoll CR3 RXFTIE LL_LPUART_IsEnabledIT_RXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_RXFT(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_RXFTIE) == (USART_CR3_RXFTIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_DMA_Management DMA_Management + * @{ + */ + +/** + * @brief Enable DMA Mode for reception + * @rmtoll CR3 DMAR LL_LPUART_EnableDMAReq_RX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDMAReq_RX(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Disable DMA Mode for reception + * @rmtoll CR3 DMAR LL_LPUART_DisableDMAReq_RX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDMAReq_RX(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Check if DMA Mode is enabled for reception + * @rmtoll CR3 DMAR LL_LPUART_IsEnabledDMAReq_RX + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDMAReq_RX(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DMAR) == (USART_CR3_DMAR)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_LPUART_EnableDMAReq_TX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDMAReq_TX(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Disable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_LPUART_DisableDMAReq_TX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDMAReq_TX(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Check if DMA Mode is enabled for transmission + * @rmtoll CR3 DMAT LL_LPUART_IsEnabledDMAReq_TX + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDMAReq_TX(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DMAT) == (USART_CR3_DMAT)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_LPUART_EnableDMADeactOnRxErr + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDMADeactOnRxErr(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Disable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_LPUART_DisableDMADeactOnRxErr + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDMADeactOnRxErr(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Indicate if DMA Disabling on Reception Error is disabled + * @rmtoll CR3 DDRE LL_LPUART_IsEnabledDMADeactOnRxErr + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDMADeactOnRxErr(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DDRE) == (USART_CR3_DDRE)) ? 1UL : 0UL); +} + +/** + * @brief Get the LPUART data register address used for DMA transfer + * @rmtoll RDR RDR LL_LPUART_DMA_GetRegAddr\n + * @rmtoll TDR TDR LL_LPUART_DMA_GetRegAddr + * @param LPUARTx LPUART Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_LPUART_DMA_REG_DATA_TRANSMIT + * @arg @ref LL_LPUART_DMA_REG_DATA_RECEIVE + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_LPUART_DMA_GetRegAddr(const USART_TypeDef *LPUARTx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_LPUART_DMA_REG_DATA_TRANSMIT) + { + /* return address of TDR register */ + data_reg_addr = (uint32_t) &(LPUARTx->TDR); + } + else + { + /* return address of RDR register */ + data_reg_addr = (uint32_t) &(LPUARTx->RDR); + } + + return data_reg_addr; +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Read Receiver Data register (Receive Data value, 8 bits) + * @rmtoll RDR RDR LL_LPUART_ReceiveData8 + * @param LPUARTx LPUART Instance + * @retval Time Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_LPUART_ReceiveData8(const USART_TypeDef *LPUARTx) +{ + return (uint8_t)(READ_BIT(LPUARTx->RDR, USART_RDR_RDR) & 0xFFU); +} + +/** + * @brief Read Receiver Data register (Receive Data value, 9 bits) + * @rmtoll RDR RDR LL_LPUART_ReceiveData9 + * @param LPUARTx LPUART Instance + * @retval Time Value between Min_Data=0x00 and Max_Data=0x1FF + */ +__STATIC_INLINE uint16_t LL_LPUART_ReceiveData9(const USART_TypeDef *LPUARTx) +{ + return (uint16_t)(READ_BIT(LPUARTx->RDR, USART_RDR_RDR)); +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 8 bits) + * @rmtoll TDR TDR LL_LPUART_TransmitData8 + * @param LPUARTx LPUART Instance + * @param Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_LPUART_TransmitData8(USART_TypeDef *LPUARTx, uint8_t Value) +{ + LPUARTx->TDR = Value; +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 9 bits) + * @rmtoll TDR TDR LL_LPUART_TransmitData9 + * @param LPUARTx LPUART Instance + * @param Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_LPUART_TransmitData9(USART_TypeDef *LPUARTx, uint16_t Value) +{ + LPUARTx->TDR = Value & 0x1FFUL; +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Execution Execution + * @{ + */ + +/** + * @brief Request Break sending + * @rmtoll RQR SBKRQ LL_LPUART_RequestBreakSending + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_RequestBreakSending(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_SBKRQ); +} + +/** + * @brief Put LPUART in mute mode and set the RWU flag + * @rmtoll RQR MMRQ LL_LPUART_RequestEnterMuteMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_RequestEnterMuteMode(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_MMRQ); +} + +/** + * @brief Request a Receive Data and FIFO flush + * @note Allows to discard the received data without reading them, and avoid an overrun + * condition. + * @rmtoll RQR RXFRQ LL_LPUART_RequestRxDataFlush + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_RequestRxDataFlush(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_RXFRQ); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPUART_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_LPUART_DeInit(const USART_TypeDef *LPUARTx); +ErrorStatus LL_LPUART_Init(USART_TypeDef *LPUARTx, const LL_LPUART_InitTypeDef *LPUART_InitStruct); +void LL_LPUART_StructInit(LL_LPUART_InitTypeDef *LPUART_InitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* LPUART1 || LPUART2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_LPUART_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_pwr.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_pwr.h new file mode 100644 index 0000000..0708967 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_pwr.h @@ -0,0 +1,1528 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_pwr.h + * @author MCD Application Team + * @brief Header file of PWR LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_PWR_H +#define STM32G0xx_LL_PWR_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined(PWR) + +/** @defgroup PWR_LL PWR + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_PWR_WriteReg function + * @{ + */ +#define LL_PWR_SCR_CSBF PWR_SCR_CSBF +#define LL_PWR_SCR_CWUF PWR_SCR_CWUF +#define LL_PWR_SCR_CWUF6 PWR_SCR_CWUF6 +#define LL_PWR_SCR_CWUF5 PWR_SCR_CWUF5 +#define LL_PWR_SCR_CWUF4 PWR_SCR_CWUF4 +#if defined(PWR_CR3_EWUP3) +#define LL_PWR_SCR_CWUF3 PWR_SCR_CWUF3 +#endif /* PWR_CR3_EWUP3 */ +#define LL_PWR_SCR_CWUF2 PWR_SCR_CWUF2 +#define LL_PWR_SCR_CWUF1 PWR_SCR_CWUF1 +/** + * @} + */ + +/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_PWR_ReadReg function + * @{ + */ +#define LL_PWR_SR1_WUFI PWR_SR1_WUFI +#define LL_PWR_SR1_SBF PWR_SR1_SBF +#define LL_PWR_SR1_WUF6 PWR_SR1_WUF6 +#define LL_PWR_SR1_WUF5 PWR_SR1_WUF5 +#define LL_PWR_SR1_WUF4 PWR_SR1_WUF4 +#if defined(PWR_CR3_EWUP3) +#define LL_PWR_SR1_WUF3 PWR_SR1_WUF3 +#endif /* PWR_CR3_EWUP3 */ +#define LL_PWR_SR1_WUF2 PWR_SR1_WUF2 +#define LL_PWR_SR1_WUF1 PWR_SR1_WUF1 +#if defined(PWR_SR2_PVDO) +#define LL_PWR_SR2_PVDO PWR_SR2_PVDO +#endif /* PWR_SR2_PVDO */ +#define LL_PWR_SR2_VOSF PWR_SR2_VOSF +#define LL_PWR_SR2_REGLPF PWR_SR2_REGLPF +#define LL_PWR_SR2_REGLPS PWR_SR2_REGLPS +/** + * @} + */ + +/** @defgroup PWR_LL_EC_REGU_VOLTAGE REGU VOLTAGE + * @{ + */ +#define LL_PWR_REGU_VOLTAGE_SCALE1 PWR_CR1_VOS_0 +#define LL_PWR_REGU_VOLTAGE_SCALE2 PWR_CR1_VOS_1 +/** + * @} + */ + +/** @defgroup PWR_LL_EC_MODE_PWR MODE PWR + * @{ + */ +#define LL_PWR_MODE_STOP0 (0x00000000UL) +#define LL_PWR_MODE_STOP1 (PWR_CR1_LPMS_0) +#define LL_PWR_MODE_STANDBY (PWR_CR1_LPMS_1|PWR_CR1_LPMS_0) +#if defined (PWR_CR1_LPMS_2) +#define LL_PWR_MODE_SHUTDOWN (PWR_CR1_LPMS_2) +#endif /* PWR_CR1_LPMS_2 */ +/** + * @} + */ + +#if defined(PWR_CR2_PVDE) +/** @defgroup PWR_LL_EC_PVDLEVEL PVDLEVEL + * @{ + */ +#define LL_PWR_PVDLLEVEL_0 0x000000000u /* VPVD0 > 2.05 V */ +#define LL_PWR_PVDLLEVEL_1 (PWR_CR2_PVDFT_0) /* VPVD0 > 2.2 V */ +#define LL_PWR_PVDLLEVEL_2 (PWR_CR2_PVDFT_1) /* VPVD1 > 2.36 V */ +#define LL_PWR_PVDLLEVEL_3 (PWR_CR2_PVDFT_1 | PWR_CR2_PVDFT_0) /* VPVD2 > 2.52 V */ +#define LL_PWR_PVDLLEVEL_4 (PWR_CR2_PVDFT_2) /* VPVD3 > 2.64 V */ +#define LL_PWR_PVDLLEVEL_5 (PWR_CR2_PVDFT_2 | PWR_CR2_PVDFT_0) /* VPVD4 > 2.81 V */ +#define LL_PWR_PVDLLEVEL_6 (PWR_CR2_PVDFT_2 | PWR_CR2_PVDFT_1) /* VPVD5 > 2.91 V */ + +#define LL_PWR_PVDHLEVEL_0 0x00000000u /* VPDD0 > 2.15 V */ +#define LL_PWR_PVDHLEVEL_1 (PWR_CR2_PVDRT_0) /* VPVD1 > 2.3 V */ +#define LL_PWR_PVDHLEVEL_2 (PWR_CR2_PVDRT_1) /* VPVD1 > 2.46 V */ +#define LL_PWR_PVDHLEVEL_3 (PWR_CR2_PVDRT_1 | PWR_CR2_PVDRT_0) /* VPVD2 > 2.62 V */ +#define LL_PWR_PVDHLEVEL_4 (PWR_CR2_PVDRT_2) /* VPVD3 > 2.74 V */ +#define LL_PWR_PVDHLEVEL_5 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_0) /* VPVD4 > 2.91 V */ +#define LL_PWR_PVDHLEVEL_6 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_1) /* VPVD5 > 3.01 V */ +#define LL_PWR_PVDHLEVEL_7 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_1 | PWR_CR2_PVDRT_0) /* External input analog voltage (Compare internally to VREFINT) */ +/** + * @} + */ +#endif /* PWR_CR2_PVDE */ + +#if defined(PWR_PVM_SUPPORT) +/** @defgroup PWR_LL_EC_PVM_IP PVM_IP + * @{ + */ +#define LL_PWR_PVM_USB PWR_CR2_PVMEN_USB /*!< Peripheral Voltage Monitoring enable for USB peripheral: Enable to keep the USB peripheral voltage monitoring under control (power domain Vddio2) */ +/** + * @} + */ +#endif /* PWR_PVM_SUPPORT */ + +/** @defgroup PWR_LL_EC_WAKEUP WAKEUP + * @{ + */ +#define LL_PWR_WAKEUP_PIN1 (PWR_CR3_EWUP1) +#define LL_PWR_WAKEUP_PIN2 (PWR_CR3_EWUP2) +#if defined(PWR_CR3_EWUP3) +#define LL_PWR_WAKEUP_PIN3 (PWR_CR3_EWUP3) +#endif /* PWR_CR3_EWUP3 */ +#define LL_PWR_WAKEUP_PIN4 (PWR_CR3_EWUP4) +#if defined(PWR_CR3_EWUP5) +#define LL_PWR_WAKEUP_PIN5 (PWR_CR3_EWUP5) +#endif /* PWR_CR3_EWUP5 */ +#define LL_PWR_WAKEUP_PIN6 (PWR_CR3_EWUP6) +/** + * @} + */ + +/** @defgroup PWR_LL_EC_BATT_CHARG_RESISTOR BATT CHARG RESISTOR + * @{ + */ +#define LL_PWR_BATTCHARG_RESISTOR_5K 0x000000000u +#define LL_PWR_BATTCHARG_RESISTOR_1_5K (PWR_CR4_VBRS) +/** + * @} + */ + +/** @defgroup PWR_LL_EC_GPIO GPIO + * @{ + */ +#define LL_PWR_GPIO_A ((uint32_t)(&(PWR->PUCRA))) +#define LL_PWR_GPIO_B ((uint32_t)(&(PWR->PUCRB))) +#define LL_PWR_GPIO_C ((uint32_t)(&(PWR->PUCRC))) +#define LL_PWR_GPIO_D ((uint32_t)(&(PWR->PUCRD))) +#if defined(GPIOE) +#define LL_PWR_GPIO_E ((uint32_t)(&(PWR->PUCRE))) +#endif /* GPIOE */ +#define LL_PWR_GPIO_F ((uint32_t)(&(PWR->PUCRF))) +/** + * @} + */ + +/** @defgroup PWR_LL_EC_GPIO_BIT GPIO BIT + * @{ + */ +#define LL_PWR_GPIO_BIT_0 0x00000001u +#define LL_PWR_GPIO_BIT_1 0x00000002u +#define LL_PWR_GPIO_BIT_2 0x00000004u +#define LL_PWR_GPIO_BIT_3 0x00000008u +#define LL_PWR_GPIO_BIT_4 0x00000010u +#define LL_PWR_GPIO_BIT_5 0x00000020u +#define LL_PWR_GPIO_BIT_6 0x00000040u +#define LL_PWR_GPIO_BIT_7 0x00000080u +#define LL_PWR_GPIO_BIT_8 0x00000100u +#define LL_PWR_GPIO_BIT_9 0x00000200u +#define LL_PWR_GPIO_BIT_10 0x00000400u +#define LL_PWR_GPIO_BIT_11 0x00000800u +#define LL_PWR_GPIO_BIT_12 0x00001000u +#define LL_PWR_GPIO_BIT_13 0x00002000u +#define LL_PWR_GPIO_BIT_14 0x00004000u +#define LL_PWR_GPIO_BIT_15 0x00008000u +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros + * @{ + */ + +/** @defgroup PWR_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in PWR register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__)) + +/** + * @brief Read a value in PWR register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Set the main internal regulator output voltage + * @rmtoll CR1 VOS LL_PWR_SetRegulVoltageScaling + * @param VoltageScaling This parameter can be one of the following values: + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetRegulVoltageScaling(uint32_t VoltageScaling) +{ + MODIFY_REG(PWR->CR1, PWR_CR1_VOS, VoltageScaling); +} + +/** + * @brief Get the main internal regulator output voltage + * @rmtoll CR1 VOS LL_PWR_GetRegulVoltageScaling + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 + */ +__STATIC_INLINE uint32_t LL_PWR_GetRegulVoltageScaling(void) +{ + return (READ_BIT(PWR->CR1, PWR_CR1_VOS)); +} + +/** + * @brief Switch the regulator from main mode to low-power mode + * @rmtoll CR1 LPR LL_PWR_EnableLowPowerRunMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableLowPowerRunMode(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_LPR); +} + +/** + * @brief Switch the regulator from low-power mode to main mode + * @rmtoll CR1 LPR LL_PWR_DisableLowPowerRunMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableLowPowerRunMode(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_LPR); +} + +/** + * @brief Check if the regulator is in low-power mode + * @rmtoll CR1 LPR LL_PWR_IsEnabledLowPowerRunMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledLowPowerRunMode(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_LPR) == (PWR_CR1_LPR)) ? 1UL : 0UL); +} + +/** + * @brief Switch from run main mode to run low-power mode. + * @rmtoll CR1 LPR LL_PWR_EnterLowPowerRunMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnterLowPowerRunMode(void) +{ + LL_PWR_EnableLowPowerRunMode(); +} + +/** + * @brief Switch from run main mode to low-power mode. + * @rmtoll CR1 LPR LL_PWR_ExitLowPowerRunMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_ExitLowPowerRunMode(void) +{ + LL_PWR_DisableLowPowerRunMode(); +} + +/** + * @brief Enable access to the backup domain + * @rmtoll CR1 DBP LL_PWR_EnableBkUpAccess + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_DBP); +} + +/** + * @brief Disable access to the backup domain + * @rmtoll CR1 DBP LL_PWR_DisableBkUpAccess + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_DBP); +} + +/** + * @brief Check if the backup domain is enabled + * @rmtoll CR1 DBP LL_PWR_IsEnabledBkUpAccess + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_DBP) == (PWR_CR1_DBP)) ? 1UL : 0UL); +} + +/** + * @brief Enable Flash Power-down mode during low power sleep mode + * @rmtoll CR1 CFIPD_SLP LL_PWR_EnableFlashPowerDownInLPSleep + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableFlashPowerDownInLPSleep(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_FPD_LPSLP); +} + +/** + * @brief Disable Flash Power-down mode during Low power sleep mode + * @rmtoll CR1 CFIPD_SLP LL_PWR_DisableFlashPowerDownInLPSleep + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableFlashPowerDownInLPSleep(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_FPD_LPSLP); +} + +/** + * @brief Check if flash power-down mode during low power sleep mode domain is enabled + * @rmtoll CR1 CFIPD_SLP LL_PWR_IsEnableFlashPowerDownInLPSleep + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnableFlashPowerDownInLPSleep(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_FPD_LPSLP) == (PWR_CR1_FPD_LPSLP)) ? 1UL : 0UL); +} + +/** + * @brief Enable Flash Power-down mode during low power run mode + * @rmtoll CR1 CFIPD_RUN LL_PWR_EnableFlashPowerDownInLPRun + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableFlashPowerDownInLPRun(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_FPD_LPRUN); +} + +/** + * @brief Disable Flash Power-down mode during Low power run mode + * @rmtoll CR1 CFIPD_RUN LL_PWR_DisableFlashPowerDownInLPRun + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableFlashPowerDownInLPRun(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_FPD_LPRUN); +} + +/** + * @brief Check if flash power-down mode during low power run mode domain is enabled + * @rmtoll CR1 CFIPD_RUN LL_PWR_IsEnableFlashPowerDownInLPRun + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnableFlashPowerDownInLPRun(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_FPD_LPRUN) == (PWR_CR1_FPD_LPRUN)) ? 1UL : 0UL); +} + +/** + * @brief Enable Flash Power-down mode during stop mode + * @rmtoll CR1 CFIPD_STOP LL_PWR_EnableFlashPowerDownInStop + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableFlashPowerDownInStop(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_FPD_STOP); +} + +/** + * @brief Disable Flash Power-down mode during stop mode + * @rmtoll CR1 CFIPD_STOP LL_PWR_DisableFlashPowerDownInStop + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableFlashPowerDownInStop(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_FPD_STOP); +} + +/** + * @brief Check if flash power-down mode during stop mode domain is enabled + * @rmtoll CR1 CFIPD_STOP LL_PWR_IsEnableFlashPowerDownInStop + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnableFlashPowerDownInStop(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_FPD_STOP) == (PWR_CR1_FPD_STOP)) ? 1UL : 0UL); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) +/** + * @brief Enable VDDIO2 supply + * @rmtoll CR2 IOSV LL_PWR_EnableVddIO2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableVddIO2(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_IOSV); +} + +/** + * @brief Disable VDDIO2 supply + * @rmtoll CR2 IOSV LL_PWR_DisableVddIO2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableVddIO2(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_IOSV); +} + +/** + * @brief Check if VDDIO2 supply is enabled + * @rmtoll CR2 IOSV LL_PWR_IsEnabledVddIO2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledVddIO2(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_IOSV) == (PWR_CR2_IOSV)) ? 1UL : 0UL); +} +#endif /* STM32G0C1xx || STM32G0B1xx */ + +#if defined(PWR_CR2_USV) +/** + * @brief Enable VDDUSB supply + * @rmtoll CR2 USV LL_PWR_EnableVddUSB + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableVddUSB(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_USV); +} + +/** + * @brief Disable VDDUSB supply + * @rmtoll CR2 USV LL_PWR_DisableVddUSB + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableVddUSB(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_USV); +} + +/** + * @brief Check if VDDUSB supply is enabled + * @rmtoll CR2 USV LL_PWR_IsEnabledVddUSB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledVddUSB(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_USV) == (PWR_CR2_USV)) ? 1UL : 0UL); +} +#endif /* PWR_CR2_USV */ + +#if defined (PWR_PVM_SUPPORT) +/** + * @brief Enable the Power Voltage Monitoring on a peripheral + * @rmtoll CR2 PVMUSB LL_PWR_EnablePVM + * @param PeriphVoltage This parameter can be one of the following values: + * @arg @ref LL_PWR_PVM_USB (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnablePVM(uint32_t PeriphVoltage) +{ + SET_BIT(PWR->CR2, PeriphVoltage); +} + +/** + * @brief Disable the Power Voltage Monitoring on a peripheral + * @rmtoll CR2 PVMUSB LL_PWR_DisablePVM + * @param PeriphVoltage This parameter can be one of the following values: + * @arg @ref LL_PWR_PVM_USB (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisablePVM(uint32_t PeriphVoltage) +{ + CLEAR_BIT(PWR->CR2, PeriphVoltage); +} + +/** + * @brief Check if Power Voltage Monitoring is enabled on a peripheral + * @rmtoll CR2 PVMUSB LL_PWR_IsEnabledPVM + * @param PeriphVoltage This parameter can be one of the following values: + * @arg @ref LL_PWR_PVM_USB (*) + * + * (*) value not defined in all devices + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVM(uint32_t PeriphVoltage) +{ + return ((READ_BIT(PWR->CR2, PeriphVoltage) == (PeriphVoltage)) ? 1UL : 0UL); +} +#endif /* PWR_PVM_SUPPORT */ + +/** + * @brief Set Low-Power mode + * @rmtoll CR1 LPMS LL_PWR_SetPowerMode + * @param LowPowerMode This parameter can be one of the following values: + * @arg @ref LL_PWR_MODE_STOP0 + * @arg @ref LL_PWR_MODE_STOP1 + * @arg @ref LL_PWR_MODE_STANDBY + * @arg @ref LL_PWR_MODE_SHUTDOWN + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t LowPowerMode) +{ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, LowPowerMode); +} + +/** + * @brief Get Low-Power mode + * @rmtoll CR1 LPMS LL_PWR_GetPowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_MODE_STOP0 + * @arg @ref LL_PWR_MODE_STOP1 + * @arg @ref LL_PWR_MODE_STANDBY + * @arg @ref LL_PWR_MODE_SHUTDOWN + */ +__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_LPMS)); +} + +#if defined (PWR_CR2_PVDE) +/** + * @brief Configure the high voltage threshold detected by the Power Voltage Detector + * @rmtoll CR2 PLS LL_PWR_SetPVDHighLevel + * @param PVDHighLevel This parameter can be one of the following values: + * @arg @ref LL_PWR_PVDHLEVEL_0 + * @arg @ref LL_PWR_PVDHLEVEL_1 + * @arg @ref LL_PWR_PVDHLEVEL_2 + * @arg @ref LL_PWR_PVDHLEVEL_3 + * @arg @ref LL_PWR_PVDHLEVEL_4 + * @arg @ref LL_PWR_PVDHLEVEL_5 + * @arg @ref LL_PWR_PVDHLEVEL_6 + * @arg @ref LL_PWR_PVDHLEVEL_7 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPVDHighLevel(uint32_t PVDHighLevel) +{ + MODIFY_REG(PWR->CR2, PWR_CR2_PVDRT, PVDHighLevel); +} + +/** + * @brief Get the voltage threshold detection + * @rmtoll CR2 PLS LL_PWR_GetPVDHighLevel + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_PVDHLEVEL_0 + * @arg @ref LL_PWR_PVDHLEVEL_1 + * @arg @ref LL_PWR_PVDHLEVEL_2 + * @arg @ref LL_PWR_PVDHLEVEL_3 + * @arg @ref LL_PWR_PVDHLEVEL_4 + * @arg @ref LL_PWR_PVDHLEVEL_5 + * @arg @ref LL_PWR_PVDHLEVEL_6 + * @arg @ref LL_PWR_PVDHLEVEL_7 + */ +__STATIC_INLINE uint32_t LL_PWR_GetPVDHighLevel(void) +{ + return (uint32_t)(READ_BIT(PWR->CR2, PWR_CR2_PVDRT)); +} +/** + * @brief Configure the low voltage threshold detected by the Power Voltage Detector + * @rmtoll CR2 PLS LL_PWR_SetPVDLowLevel + * @param PVDLowLevel This parameter can be one of the following values: + * @arg @ref LL_PWR_PVDLLEVEL_0 + * @arg @ref LL_PWR_PVDLLEVEL_1 + * @arg @ref LL_PWR_PVDLLEVEL_2 + * @arg @ref LL_PWR_PVDLLEVEL_3 + * @arg @ref LL_PWR_PVDLLEVEL_4 + * @arg @ref LL_PWR_PVDLLEVEL_5 + * @arg @ref LL_PWR_PVDLLEVEL_6 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPVDLowLevel(uint32_t PVDLowLevel) +{ + MODIFY_REG(PWR->CR2, PWR_CR2_PVDFT, PVDLowLevel); +} + +/** + * @brief Get the low voltage threshold detection + * @rmtoll CR2 PLS LL_PWR_GetPVDLowLevel + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_PVDLLEVEL_0 + * @arg @ref LL_PWR_PVDLLEVEL_1 + * @arg @ref LL_PWR_PVDLLEVEL_2 + * @arg @ref LL_PWR_PVDLLEVEL_3 + * @arg @ref LL_PWR_PVDLLEVEL_4 + * @arg @ref LL_PWR_PVDLLEVEL_5 + * @arg @ref LL_PWR_PVDLLEVEL_6 + */ +__STATIC_INLINE uint32_t LL_PWR_GetPVDLowLevel(void) +{ + return (uint32_t)(READ_BIT(PWR->CR2, PWR_CR2_PVDFT)); +} + +/** + * @brief Enable Power Voltage Detector + * @rmtoll CR2 PVDE LL_PWR_EnablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnablePVD(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_PVDE); +} + +/** + * @brief Disable Power Voltage Detector + * @rmtoll CR2 PVDE LL_PWR_DisablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisablePVD(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_PVDE); +} + +/** + * @brief Check if Power Voltage Detector is enabled + * @rmtoll CR2 PVDE LL_PWR_IsEnabledPVD + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_PVDE) == (PWR_CR2_PVDE)) ? 1UL : 0UL); +} +#endif /* PWR_CR2_PVDE */ + +/** + * @brief Enable Internal Wake-up line + * @rmtoll CR3 EIWF LL_PWR_EnableInternWU + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableInternWU(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_EIWUL); +} + +/** + * @brief Disable Internal Wake-up line + * @rmtoll CR3 EIWF LL_PWR_DisableInternWU + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableInternWU(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_EIWUL); +} + +/** + * @brief Check if Internal Wake-up line is enabled + * @rmtoll CR3 EIWF LL_PWR_IsEnabledInternWU + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledInternWU(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_EIWUL) == (PWR_CR3_EIWUL)) ? 1UL : 0UL); +} + +/** + * @brief Enable pull-up and pull-down configuration + * @rmtoll CR3 APC LL_PWR_EnablePUPDCfg + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnablePUPDCfg(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_APC); +} + +/** + * @brief Disable pull-up and pull-down configuration + * @rmtoll CR3 APC LL_PWR_DisablePUPDCfg + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisablePUPDCfg(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_APC); +} + +/** + * @brief Check if pull-up and pull-down configuration is enabled + * @rmtoll CR3 APC LL_PWR_IsEnabledPUPDCfg + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledPUPDCfg(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_APC) == (PWR_CR3_APC)) ? 1UL : 0UL); +} + +#if defined(PWR_CR3_RRS) +/** + * @brief Enable SRAM content retention in Standby mode + * @rmtoll CR3 RRS LL_PWR_EnableSRAMRetention + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableSRAMRetention(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_RRS); +} + +/** + * @brief Disable SRAM content retention in Standby mode + * @rmtoll CR3 RRS LL_PWR_DisableSRAMRetention + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableSRAMRetention(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_RRS); +} + +/** + * @brief Check if SRAM content retention in Standby mode is enabled + * @rmtoll CR3 RRS LL_PWR_IsEnabledSRAMRetention + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledSRAMRetention(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_RRS) == (PWR_CR3_RRS)) ? 1UL : 0UL); +} +#endif /* PWR_CR3_RRS */ + +#if defined(PWR_CR3_ENB_ULP) +/** + * @brief Enable sampling mode of LPMMU reset block + * @rmtoll CR3 ENB_ULP LL_PWR_EnableLPMUResetSamplingMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableLPMUResetSamplingMode(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_ENB_ULP); +} + +/** + * @brief Disable sampling mode of LPMMU reset block + * @rmtoll CR3 ENB_ULP LL_PWR_DisableLPMUResetSamplingMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableLPMUResetSamplingMode(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_ENB_ULP); +} + +/** + * @brief Check if sampling mode of LPMMU reset block + * @rmtoll CR3 ENB_ULP LL_PWR_IsEnableLPMUResetSamplingMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnableLPMUResetSamplingMode(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_ENB_ULP) == (PWR_CR3_ENB_ULP)) ? 1UL : 0UL); +} +#endif /* PWR_CR3_ENB_ULP */ + +/** + * @brief Enable the WakeUp PINx functionality + * @rmtoll CR3 EWUP1 LL_PWR_EnableWakeUpPin\n + * CR3 EWUP2 LL_PWR_EnableWakeUpPin\n + * CR3 EWUP3 LL_PWR_EnableWakeUpPin\n + * CR3 EWUP4 LL_PWR_EnableWakeUpPin\n + * CR3 EWUP5 LL_PWR_EnableWakeUpPin\n + * CR3 EWUP6 LL_PWR_EnableWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @retval None + * @note (*) availability depends on devices + */ +__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin) +{ + SET_BIT(PWR->CR3, WakeUpPin); +} + +/** + * @brief Disable the WakeUp PINx functionality + * @rmtoll CR3 EWUP1 LL_PWR_DisableWakeUpPin\n + * CR3 EWUP2 LL_PWR_DisableWakeUpPin\n + * CR3 EWUP3 LL_PWR_DisableWakeUpPin\n + * CR3 EWUP4 LL_PWR_DisableWakeUpPin\n + * CR3 EWUP5 LL_PWR_DisableWakeUpPin\n + * CR3 EWUP6 LL_PWR_DisableWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @retval None + * @note (*) availability depends on devices + */ +__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin) +{ + CLEAR_BIT(PWR->CR3, WakeUpPin); +} + +/** + * @brief Check if the WakeUp PINx functionality is enabled + * @rmtoll CR3 EWUP1 LL_PWR_IsEnabledWakeUpPin\n + * CR3 EWUP2 LL_PWR_IsEnabledWakeUpPin\n + * CR3 EWUP3 LL_PWR_IsEnabledWakeUpPin\n + * CR3 EWUP4 LL_PWR_IsEnabledWakeUpPin\n + * CR3 EWUP5 LL_PWR_IsEnabledWakeUpPin\n + * CR3 EWUP6 LL_PWR_IsEnabledWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @retval State of bit (1 or 0). + * @note (*) availability depends on devices + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin) +{ + return ((READ_BIT(PWR->CR3, WakeUpPin) == (WakeUpPin)) ? 1UL : 0UL); +} + +/** + * @brief Set the resistor impedance + * @rmtoll CR4 VBRS LL_PWR_SetBattChargResistor + * @param Resistor This parameter can be one of the following values: + * @arg @ref LL_PWR_BATTCHARG_RESISTOR_5K + * @arg @ref LL_PWR_BATTCHARG_RESISTOR_1_5K + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetBattChargResistor(uint32_t Resistor) +{ + MODIFY_REG(PWR->CR4, PWR_CR4_VBRS, Resistor); +} + +/** + * @brief Get the resistor impedance + * @rmtoll CR4 VBRS LL_PWR_GetBattChargResistor + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_BATTCHARG_RESISTOR_5K + * @arg @ref LL_PWR_BATTCHARG_RESISTOR_1_5K + */ +__STATIC_INLINE uint32_t LL_PWR_GetBattChargResistor(void) +{ + return (uint32_t)(READ_BIT(PWR->CR4, PWR_CR4_VBRS)); +} + +/** + * @brief Enable battery charging + * @rmtoll CR4 VBE LL_PWR_EnableBatteryCharging + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBatteryCharging(void) +{ + SET_BIT(PWR->CR4, PWR_CR4_VBE); +} + +/** + * @brief Disable battery charging + * @rmtoll CR4 VBE LL_PWR_DisableBatteryCharging + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBatteryCharging(void) +{ + CLEAR_BIT(PWR->CR4, PWR_CR4_VBE); +} + +/** + * @brief Check if battery charging is enabled + * @rmtoll CR4 VBE LL_PWR_IsEnabledBatteryCharging + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBatteryCharging(void) +{ + return ((READ_BIT(PWR->CR4, PWR_CR4_VBE) == (PWR_CR4_VBE)) ? 1UL : 0UL); +} + +/** + * @brief Set the Wake-Up pin polarity low for the event detection + * @rmtoll CR4 WP1 LL_PWR_SetWakeUpPinPolarityLow\n + * CR4 WP2 LL_PWR_SetWakeUpPinPolarityLow\n + * CR4 WP3 LL_PWR_SetWakeUpPinPolarityLow\n + * CR4 WP4 LL_PWR_SetWakeUpPinPolarityLow\n + * CR4 WP5 LL_PWR_SetWakeUpPinPolarityLow\n + * CR4 WP6 LL_PWR_SetWakeUpPinPolarityLow + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @retval None + * @note (*) availability depends on devices + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityLow(uint32_t WakeUpPin) +{ + SET_BIT(PWR->CR4, WakeUpPin); +} + +/** + * @brief Set the Wake-Up pin polarity high for the event detection + * @rmtoll CR4 WP1 LL_PWR_SetWakeUpPinPolarityHigh\n + * CR4 WP2 LL_PWR_SetWakeUpPinPolarityHigh\n + * CR4 WP3 LL_PWR_SetWakeUpPinPolarityHigh\n + * CR4 WP4 LL_PWR_SetWakeUpPinPolarityHigh\n + * CR4 WP5 LL_PWR_SetWakeUpPinPolarityHigh\n + * CR4 WP6 LL_PWR_SetWakeUpPinPolarityHigh + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @note (*) availability depends on devices + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityHigh(uint32_t WakeUpPin) +{ + CLEAR_BIT(PWR->CR4, WakeUpPin); +} + +/** + * @brief Get the Wake-Up pin polarity for the event detection + * @rmtoll CR4 WP1 LL_PWR_IsWakeUpPinPolarityLow\n + * CR4 WP2 LL_PWR_IsWakeUpPinPolarityLow\n + * CR4 WP3 LL_PWR_IsWakeUpPinPolarityLow\n + * CR4 WP4 LL_PWR_IsWakeUpPinPolarityLow\n + * CR4 WP5 LL_PWR_IsWakeUpPinPolarityLow\n + * CR4 WP6 LL_PWR_IsWakeUpPinPolarityLow + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @note (*) availability depends on devices + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsWakeUpPinPolarityLow(uint32_t WakeUpPin) +{ + return ((READ_BIT(PWR->CR4, WakeUpPin) == (WakeUpPin)) ? 1UL : 0UL); +} + +/** + * @brief Enable GPIO pull-up state in Standby and Shutdown modes + * @rmtoll PUCRA PU0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRB PU0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRC PU0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRD PU0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRE PU0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRF PU0-13 LL_PWR_EnableGPIOPullUp + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * @arg @ref LL_PWR_GPIO_E (*) + * @arg @ref LL_PWR_GPIO_F + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + SET_BIT(*((__IO uint32_t *)GPIO), GPIONumber); +} + +/** + * @brief Disable GPIO pull-up state in Standby and Shutdown modes + * @rmtoll PUCRA PU0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRB PU0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRC PU0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRD PU0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRE PU0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRF PU0-13 LL_PWR_DisableGPIOPullUp + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * @arg @ref LL_PWR_GPIO_E (*) + * @arg @ref LL_PWR_GPIO_F + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + CLEAR_BIT(*((__IO uint32_t *)GPIO), GPIONumber); +} + +/** + * @brief Check if GPIO pull-up state is enabled + * @rmtoll PUCRA PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRB PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRC PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRD PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRE PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRF PU0-13 LL_PWR_IsEnabledGPIOPullUp + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * @arg @ref LL_PWR_GPIO_E (*) + * @arg @ref LL_PWR_GPIO_F + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + return ((READ_BIT(*((__IO uint32_t *)GPIO), GPIONumber) == (GPIONumber)) ? 1UL : 0UL); +} + +/** + * @brief Enable GPIO pull-down state in Standby and Shutdown modes + * @rmtoll PDCRA PD0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRB PD0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRC PD0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRD PD0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRE PD0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRF PD0-13 LL_PWR_EnableGPIOPullDown + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * @arg @ref LL_PWR_GPIO_E (*) + * @arg @ref LL_PWR_GPIO_F + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + SET_BIT(*((__IO uint32_t *)(GPIO + 4U)), GPIONumber); +} + +/** + * @brief Disable GPIO pull-down state in Standby and Shutdown modes + * @rmtoll PDCRA PD0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRB PD0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRC PD0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRD PD0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRE PD0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRF PD0-13 LL_PWR_DisableGPIOPullDown + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * @arg @ref LL_PWR_GPIO_E (*) + * @arg @ref LL_PWR_GPIO_F + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + CLEAR_BIT(*((__IO uint32_t *)(GPIO + 4U)), GPIONumber); +} + +/** + * @brief Check if GPIO pull-down state is enabled + * @rmtoll PDCRA PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRB PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRC PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRD PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRE PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRF PD0-13 LL_PWR_IsEnabledGPIOPullDown + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * @arg @ref LL_PWR_GPIO_E (*) + * @arg @ref LL_PWR_GPIO_F + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + return ((READ_BIT(*((__IO uint32_t *)(GPIO + 4U)), GPIONumber) == (GPIONumber)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Internal Wake-up line Flag + * @rmtoll SR1 WUFI LL_PWR_IsActiveFlag_InternWU + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_InternWU(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUFI) == (PWR_SR1_WUFI)) ? 1UL : 0UL); +} + +/** + * @brief Get Stand-By Flag + * @rmtoll SR1 SBF LL_PWR_IsActiveFlag_SB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_SBF) == (PWR_SR1_SBF)) ? 1UL : 0UL); +} + +/** + * @brief Get Wake-up Flag 6 + * @rmtoll SR1 WUF6 LL_PWR_IsActiveFlag_WU6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU6(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF6) == (PWR_SR1_WUF6)) ? 1UL : 0UL); +} + +#if defined(PWR_CR3_EWUP5) +/** + * @brief Get Wake-up Flag 5 + * @rmtoll SR1 WUF5 LL_PWR_IsActiveFlag_WU5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU5(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF5) == (PWR_SR1_WUF5)) ? 1UL : 0UL); +} +#endif /* PWR_CR3_EWUP5 */ + +/** + * @brief Get Wake-up Flag 4 + * @rmtoll SR1 WUF4 LL_PWR_IsActiveFlag_WU4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU4(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF4) == (PWR_SR1_WUF4)) ? 1UL : 0UL); +} + +#if defined(PWR_CR3_EWUP3) +/** + * @brief Get Wake-up Flag 3 + * @rmtoll SR1 WUF3 LL_PWR_IsActiveFlag_WU3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU3(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF3) == (PWR_SR1_WUF3)) ? 1UL : 0UL); +} +#endif /* PWR_CR3_EWUP3 */ + +/** + * @brief Get Wake-up Flag 2 + * @rmtoll SR1 WUF2 LL_PWR_IsActiveFlag_WU2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU2(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF2) == (PWR_SR1_WUF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Wake-up Flag 1 + * @rmtoll SR1 WUF1 LL_PWR_IsActiveFlag_WU1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU1(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF1) == (PWR_SR1_WUF1)) ? 1UL : 0UL); +} + +/** + * @brief Clear Stand-By Flag + * @rmtoll SCR CSBF LL_PWR_ClearFlag_SB + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_SB(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CSBF); +} + +/** + * @brief Clear Wake-up Flags + * @rmtoll SCR CWUF LL_PWR_ClearFlag_WU + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF); +} + +/** + * @brief Clear Wake-up Flag 6 + * @rmtoll SCR CWUF6 LL_PWR_ClearFlag_WU6 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU6(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF6); +} + +#if defined(PWR_CR3_EWUP5) +/** + * @brief Clear Wake-up Flag 5 + * @rmtoll SCR CWUF5 LL_PWR_ClearFlag_WU5 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU5(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF5); +} +#endif /* PWR_CR3_EWUP5 */ + +/** + * @brief Clear Wake-up Flag 4 + * @rmtoll SCR CWUF4 LL_PWR_ClearFlag_WU4 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU4(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF4); +} + +#if defined(PWR_CR3_EWUP3) +/** + * @brief Clear Wake-up Flag 3 + * @rmtoll SCR CWUF3 LL_PWR_ClearFlag_WU3 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU3(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF3); +} +#endif /* PWR_CR3_EWUP3 */ + +/** + * @brief Clear Wake-up Flag 2 + * @rmtoll SCR CWUF2 LL_PWR_ClearFlag_WU2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU2(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF2); +} + +/** + * @brief Clear Wake-up Flag 1 + * @rmtoll SCR CWUF1 LL_PWR_ClearFlag_WU1 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU1(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF1); +} + +#if defined (PWR_PVM_SUPPORT) +/** + * @brief Indicate whether VDD voltage is below or above the selected PVD + * threshold + * @rmtoll SR2 PVDMO_USB LL_PWR_IsActiveFlag_PVMOUSB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVMOUSB(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_PVMO_USB) == (PWR_SR2_PVMO_USB)) ? 1UL : 0UL); +} +#endif /* PWR_PVM_SUPPORT */ + +#if defined(PWR_SR2_PVDO) +/** + * @brief Indicate whether VDD voltage is below or above the selected PVD + * threshold + * @rmtoll SR2 PVDO LL_PWR_IsActiveFlag_PVDO + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_PVDO) == (PWR_SR2_PVDO)) ? 1UL : 0UL); +} +#endif /* PWR_SR2_PVDO */ + +/** + * @brief Indicate whether the regulator is ready in the selected voltage + * range or if its output voltage is still changing to the required + * voltage level + * @note: Take care, return value "0" means the regulator is ready. + * Return value "1" means the output voltage range is still changing. + * @rmtoll SR2 VOSF LL_PWR_IsActiveFlag_VOS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VOS(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_VOSF) == (PWR_SR2_VOSF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether the regulator is ready in main mode or is in + * low-power mode + * @note: Take care, return value "0" means regulator is ready in main mode + * Return value "1" means regulator is in low-power mode (LPR) + * @rmtoll SR2 REGLPF LL_PWR_IsActiveFlag_REGLPF + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_REGLPF(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_REGLPF) == (PWR_SR2_REGLPF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether or not the low-power regulator is ready + * @rmtoll SR2 REGLPS LL_PWR_IsActiveFlag_REGLPS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_REGLPS(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_REGLPS) == (PWR_SR2_REGLPS)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether or not the flash is ready to be accessed + * @rmtoll SR2 FLASH_RDY LL_PWR_IsActiveFlag_FLASH_RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_FLASH_RDY(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_FLASH_RDY) == (PWR_SR2_FLASH_RDY)) ? 1UL : 0UL); +} + + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup PWR_LL_EF_Init De-initialization function + * @{ + */ +ErrorStatus LL_PWR_DeInit(void); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(PWR) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_PWR_H */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rcc.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rcc.h new file mode 100644 index 0000000..135b670 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rcc.h @@ -0,0 +1,3977 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_rcc.h + * @author MCD Application Team + * @brief Header file of RCC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_RCC_H +#define STM32G0xx_LL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup RCC_LL RCC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_LL_Private_Variables RCC Private Variables + * @{ + */ + + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Private_Macros RCC Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Exported_Types RCC Exported Types + * @{ + */ + +/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure + * @{ + */ + +/** + * @brief RCC Clocks Frequency Structure + */ +typedef struct +{ + uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency */ + uint32_t HCLK_Frequency; /*!< HCLK clock frequency */ + uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency */ +} LL_RCC_ClocksTypeDef; + +/** + * @} + */ + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation + * @brief Defines used to adapt values of different oscillators + * @note These values could be modified in the user environment according to + * HW set-up. + * @{ + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE 8000000U /*!< Value of the HSE oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) +#define HSI_VALUE 16000000U /*!< Value of the HSI oscillator in Hz */ +#endif /* HSI_VALUE */ + +#if !defined (LSE_VALUE) +#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSI_VALUE) +#define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */ +#endif /* LSI_VALUE */ +#if !defined (EXTERNAL_CLOCK_VALUE) +#define EXTERNAL_CLOCK_VALUE 48000000U /*!< Value of the I2S_CKIN external oscillator in Hz */ +#endif /* EXTERNAL_CLOCK_VALUE */ + +#if defined(RCC_HSI48_SUPPORT) +#if !defined (HSI48_VALUE) +#define HSI48_VALUE 48000000U /*!< Value of the HSI48 oscillator in Hz */ +#endif /* HSI48_VALUE */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_RCC_WriteReg function + * @{ + */ +#define LL_RCC_CICR_LSIRDYC RCC_CICR_LSIRDYC /*!< LSI Ready Interrupt Clear */ +#define LL_RCC_CICR_LSERDYC RCC_CICR_LSERDYC /*!< LSE Ready Interrupt Clear */ +#define LL_RCC_CICR_HSIRDYC RCC_CICR_HSIRDYC /*!< HSI Ready Interrupt Clear */ +#define LL_RCC_CICR_HSERDYC RCC_CICR_HSERDYC /*!< HSE Ready Interrupt Clear */ +#define LL_RCC_CICR_PLLRDYC RCC_CICR_PLLRDYC /*!< PLL Ready Interrupt Clear */ +#define LL_RCC_CICR_LSECSSC RCC_CICR_LSECSSC /*!< LSE Clock Security System Interrupt Clear */ +#define LL_RCC_CICR_CSSC RCC_CICR_CSSC /*!< Clock Security System Interrupt Clear */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_CICR_HSI48RDYC RCC_CICR_HSI48RDYC /*!< HSI48 Ready Interrupt Clear */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_RCC_ReadReg function + * @{ + */ +#define LL_RCC_CIFR_LSIRDYF RCC_CIFR_LSIRDYF /*!< LSI Ready Interrupt flag */ +#define LL_RCC_CIFR_LSERDYF RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt flag */ +#define LL_RCC_CIFR_HSIRDYF RCC_CIFR_HSIRDYF /*!< HSI Ready Interrupt flag */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_CIFR_HSI48RDYF RCC_CIFR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */ +#endif /* RCC_HSI48_SUPPORT */ +#define LL_RCC_CIFR_HSERDYF RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */ +#define LL_RCC_CIFR_PLLRDYF RCC_CIFR_PLLRDYF /*!< PLL Ready Interrupt flag */ +#define LL_RCC_CIFR_LSECSSF RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt flag */ +#define LL_RCC_CIFR_CSSF RCC_CIFR_CSSF /*!< Clock Security System Interrupt flag */ +#define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */ +#define LL_RCC_CSR_OBLRSTF RCC_CSR_OBLRSTF /*!< OBL reset flag */ +#define LL_RCC_CSR_PINRSTF RCC_CSR_PINRSTF /*!< PIN reset flag */ +#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software Reset flag */ +#define LL_RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */ +#define LL_RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */ +#define LL_RCC_CSR_PWRRSTF RCC_CSR_PWRRSTF /*!< BOR or POR/PDR reset flag */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_RCC_ReadReg and LL_RCC_WriteReg functions + * @{ + */ +#define LL_RCC_CIER_LSIRDYIE RCC_CIER_LSIRDYIE /*!< LSI Ready Interrupt Enable */ +#define LL_RCC_CIER_LSERDYIE RCC_CIER_LSERDYIE /*!< LSE Ready Interrupt Enable */ +#define LL_RCC_CIER_HSIRDYIE RCC_CIER_HSIRDYIE /*!< HSI Ready Interrupt Enable */ +#define LL_RCC_CIER_HSERDYIE RCC_CIER_HSERDYIE /*!< HSE Ready Interrupt Enable */ +#define LL_RCC_CIER_PLLRDYIE RCC_CIER_PLLRDYIE /*!< PLL Ready Interrupt Enable */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_CIER_HSI48RDYIE RCC_CIER_HSI48RDYIE /*!< HSI48 Ready Interrupt Enable */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LSEDRIVE LSE oscillator drive capability + * @{ + */ +#define LL_RCC_LSEDRIVE_LOW 0x00000000U /*!< Xtal mode lower driving capability */ +#define LL_RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_0 /*!< Xtal mode medium low driving capability */ +#define LL_RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_1 /*!< Xtal mode medium high driving capability */ +#define LL_RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< Xtal mode higher driving capability */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LSCO_CLKSOURCE LSCO Selection + * @{ + */ +#define LL_RCC_LSCO_CLKSOURCE_LSI 0x00000000U /*!< LSI selection for low speed clock */ +#define LL_RCC_LSCO_CLKSOURCE_LSE RCC_BDCR_LSCOSEL /*!< LSE selection for low speed clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_HSI 0x00000000U /*!< HSI selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_0 /*!< HSE selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_PLL RCC_CFGR_SW_1 /*!< PLL selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_LSI (RCC_CFGR_SW_1 | RCC_CFGR_SW_0) /*!< LSI selection used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_LSE RCC_CFGR_SW_2 /*!< LSE selection used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI 0x00000000U /*!< HSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_0 /*!< HSE used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL RCC_CFGR_SWS_1 /*!< PLL used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_LSI (RCC_CFGR_SWS_1 | RCC_CFGR_SWS_0) /*!< LSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_LSE RCC_CFGR_SWS_2 /*!< LSE used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYSCLK_DIV AHB prescaler + * @{ + */ +#define LL_RCC_SYSCLK_DIV_1 0x00000000U /*!< SYSCLK not divided */ +#define LL_RCC_SYSCLK_DIV_2 RCC_CFGR_HPRE_3 /*!< SYSCLK divided by 2 */ +#define LL_RCC_SYSCLK_DIV_4 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 4 */ +#define LL_RCC_SYSCLK_DIV_8 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_1) /*!< SYSCLK divided by 8 */ +#define LL_RCC_SYSCLK_DIV_16 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_1 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 16 */ +#define LL_RCC_SYSCLK_DIV_64 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2) /*!< SYSCLK divided by 64 */ +#define LL_RCC_SYSCLK_DIV_128 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 128 */ +#define LL_RCC_SYSCLK_DIV_256 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1) /*!< SYSCLK divided by 256 */ +#define LL_RCC_SYSCLK_DIV_512 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 512 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1) + * @{ + */ +#define LL_RCC_APB1_DIV_1 0x00000000U /*!< HCLK not divided */ +#define LL_RCC_APB1_DIV_2 RCC_CFGR_PPRE_2 /*!< HCLK divided by 2 */ +#define LL_RCC_APB1_DIV_4 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_0) /*!< HCLK divided by 4 */ +#define LL_RCC_APB1_DIV_8 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_1) /*!< HCLK divided by 8 */ +#define LL_RCC_APB1_DIV_16 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_1 | RCC_CFGR_PPRE_0) /*!< HCLK divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_HSI_DIV HSI division factor + * @{ + */ +#define LL_RCC_HSI_DIV_1 0x00000000U /*!< HSI not divided */ +#define LL_RCC_HSI_DIV_2 RCC_CR_HSIDIV_0 /*!< HSI divided by 2 */ +#define LL_RCC_HSI_DIV_4 RCC_CR_HSIDIV_1 /*!< HSI divided by 4 */ +#define LL_RCC_HSI_DIV_8 (RCC_CR_HSIDIV_1 | RCC_CR_HSIDIV_0) /*!< HSI divided by 8 */ +#define LL_RCC_HSI_DIV_16 RCC_CR_HSIDIV_2 /*!< HSI divided by 16 */ +#define LL_RCC_HSI_DIV_32 (RCC_CR_HSIDIV_2 | RCC_CR_HSIDIV_0) /*!< HSI divided by 32 */ +#define LL_RCC_HSI_DIV_64 (RCC_CR_HSIDIV_2 | RCC_CR_HSIDIV_1) /*!< HSI divided by 64 */ +#define LL_RCC_HSI_DIV_128 RCC_CR_HSIDIV /*!< HSI divided by 128 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCO1SOURCE MCO1 SOURCE selection + * @{ + */ +#define LL_RCC_MCO1SOURCE_NOCLOCK 0x00000000U /*!< MCO output disabled, no clock on MCO */ +#define LL_RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_0 /*!< SYSCLK selection as MCO1 source */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCOSEL_1 /*!< HSI48 selection as MCO1 source */ +#endif /* RCC_HSI48_SUPPORT */ +#define LL_RCC_MCO1SOURCE_HSI (RCC_CFGR_MCOSEL_0| RCC_CFGR_MCOSEL_1) /*!< HSI16 selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_2 /*!< HSE selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_2) /*!< Main PLL selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_LSI (RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSI selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_LSE (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSE selection as MCO1 source */ +#if defined(RCC_CFGR_MCOSEL_3) +#define LL_RCC_MCO1SOURCE_PLLPCLK RCC_CFGR_MCOSEL_3 /*!< PLLPCLK selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_PLLQCLK (RCC_CFGR_MCOSEL_3|RCC_CFGR_MCOSEL_0) /*!< PLLQCLK selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_RTCCLK (RCC_CFGR_MCOSEL_3|RCC_CFGR_MCOSEL_1) /*!< RTCCLK selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_RTC_WKUP (RCC_CFGR_MCOSEL_3|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_0) /*!< RTC_Wakeup selection as MCO1 source */ +#endif /* RCC_CFGR_MCOSEL_3 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCO1_DIV MCO1 prescaler + * @{ + */ +#define LL_RCC_MCO1_DIV_1 0x00000000U /*!< MCO1 not divided */ +#define LL_RCC_MCO1_DIV_2 RCC_CFGR_MCOPRE_0 /*!< MCO1 divided by 2 */ +#define LL_RCC_MCO1_DIV_4 RCC_CFGR_MCOPRE_1 /*!< MCO1 divided by 4 */ +#define LL_RCC_MCO1_DIV_8 (RCC_CFGR_MCOPRE_1 | RCC_CFGR_MCOPRE_0) /*!< MCO1 divided by 8 */ +#define LL_RCC_MCO1_DIV_16 RCC_CFGR_MCOPRE_2 /*!< MCO1 divided by 16 */ +#define LL_RCC_MCO1_DIV_32 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_0) /*!< MCO1 divided by 32 */ +#define LL_RCC_MCO1_DIV_64 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_1) /*!< MCO1 divided by 64 */ +#define LL_RCC_MCO1_DIV_128 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_1 | RCC_CFGR_MCOPRE_0) /*!< MCO1 divided by 128 */ +#if defined(RCC_CFGR_MCOPRE_3) +#define LL_RCC_MCO1_DIV_256 RCC_CFGR_MCOPRE_3 /*!< MCO divided by 256 */ +#define LL_RCC_MCO1_DIV_512 (RCC_CFGR_MCOPRE_3 | RCC_CFGR_MCOPRE_0) /*!< MCO divided by 512 */ +#define LL_RCC_MCO1_DIV_1024 (RCC_CFGR_MCOPRE_3 | RCC_CFGR_MCOPRE_1) /*!< MCO divided by 1024 */ +#endif /* RCC_CFGR_MCOPRE_3 */ +/** + * @} + */ + +#if defined(RCC_MCO2_SUPPORT) +/** @defgroup RCC_LL_EC_MCO2SOURCE MCO2 SOURCE selection + * @{ + */ +#define LL_RCC_MCO2SOURCE_NOCLOCK 0x00000000U /*!< MCO output disabled, no clock on MCO */ +#define LL_RCC_MCO2SOURCE_SYSCLK RCC_CFGR_MCO2SEL_0 /*!< SYSCLK selection as MCO2 source */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_MCO2SOURCE_HSI48 RCC_CFGR_MCO2SEL_1 /*!< HSI48 selection as MCO2 source */ +#endif /* RCC_HSI48_SUPPORT */ +#define LL_RCC_MCO2SOURCE_HSI (RCC_CFGR_MCO2SEL_1 | RCC_CFGR_MCO2SEL_0) /*!< HSI16 selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2SEL_2 /*!< HSE selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_PLLCLK (RCC_CFGR_MCO2SEL_2 | RCC_CFGR_MCO2SEL_0) /*!< Main PLL "R" clock selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_LSI (RCC_CFGR_MCO2SEL_2 | RCC_CFGR_MCO2SEL_1) /*!< LSI selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_LSE (RCC_CFGR_MCO2SEL_2 | RCC_CFGR_MCO2SEL_1 | RCC_CFGR_MCO2SEL_0) /*!< LSE selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_PLLPCLK RCC_CFGR_MCO2SEL_3 /*!< PLL "P" clock selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_PLLQCLK (RCC_CFGR_MCO2SEL_3 | RCC_CFGR_MCO2SEL_0) /*!< PLL "Q" clock selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_RTCCLK (RCC_CFGR_MCO2SEL_3 | RCC_CFGR_MCO2SEL_1) /*!< RTC Clock selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_RTC_WKUP (RCC_CFGR_MCO2SEL_3 | RCC_CFGR_MCO2SEL_1 | RCC_CFGR_MCO2SEL_0) /*!< RTC Wakeup timer selection as MCO2 source */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCO2_DIV MCO2 prescaler + * @{ + */ +#define LL_RCC_MCO2_DIV_1 0x00000000U /*!< MCO2 not divided */ +#define LL_RCC_MCO2_DIV_2 RCC_CFGR_MCO2PRE_0 /*!< MCO2 divided by 2 */ +#define LL_RCC_MCO2_DIV_4 RCC_CFGR_MCO2PRE_1 /*!< MCO2 divided by 4 */ +#define LL_RCC_MCO2_DIV_8 (RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 8 */ +#define LL_RCC_MCO2_DIV_16 RCC_CFGR_MCO2PRE_2 /*!< MCO2 divided by 16 */ +#define LL_RCC_MCO2_DIV_32 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 32 */ +#define LL_RCC_MCO2_DIV_64 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_1) /*!< MCO2 divided by 64 */ +#define LL_RCC_MCO2_DIV_128 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 128 */ +#define LL_RCC_MCO2_DIV_256 RCC_CFGR_MCO2PRE_3 /*!< MCO2 divided by 256 */ +#define LL_RCC_MCO2_DIV_512 (RCC_CFGR_MCO2PRE_3 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 512 */ +#define LL_RCC_MCO2_DIV_1024 (RCC_CFGR_MCO2PRE_3 | RCC_CFGR_MCO2PRE_1) /*!< MCO2 divided by 1024 */ +/** + * @} + */ +#endif /* RCC_MCO2_SUPPORT */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency + * @{ + */ +#define LL_RCC_PERIPH_FREQUENCY_NO 0x00000000U /*!< No clock enabled for the peripheral */ +#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup RCC_LL_EC_USARTx_CLKSOURCE Peripheral USART clock source selection + * @{ + */ +#define LL_RCC_USART1_CLKSOURCE_PCLK1 ((RCC_CCIPR_USART1SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as USART1 clock source */ +#define LL_RCC_USART1_CLKSOURCE_SYSCLK ((RCC_CCIPR_USART1SEL << 16U) | RCC_CCIPR_USART1SEL_0) /*!< SYSCLK clock used as USART1 clock source */ +#define LL_RCC_USART1_CLKSOURCE_HSI ((RCC_CCIPR_USART1SEL << 16U) | RCC_CCIPR_USART1SEL_1) /*!< HSI clock used as USART1 clock source */ +#define LL_RCC_USART1_CLKSOURCE_LSE ((RCC_CCIPR_USART1SEL << 16U) | RCC_CCIPR_USART1SEL) /*!< LSE clock used as USART1 clock source */ +#if defined(RCC_CCIPR_USART2SEL) +#define LL_RCC_USART2_CLKSOURCE_PCLK1 ((RCC_CCIPR_USART2SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as USART2 clock source */ +#define LL_RCC_USART2_CLKSOURCE_SYSCLK ((RCC_CCIPR_USART2SEL << 16U) | RCC_CCIPR_USART2SEL_0) /*!< SYSCLK clock used as USART2 clock source */ +#define LL_RCC_USART2_CLKSOURCE_HSI ((RCC_CCIPR_USART2SEL << 16U) | RCC_CCIPR_USART2SEL_1) /*!< HSI clock used as USART2 clock source */ +#define LL_RCC_USART2_CLKSOURCE_LSE ((RCC_CCIPR_USART2SEL << 16U) | RCC_CCIPR_USART2SEL) /*!< LSE clock used as USART2 clock source */ +#endif /* RCC_CCIPR_USART2SEL */ +#if defined(RCC_CCIPR_USART3SEL) +#define LL_RCC_USART3_CLKSOURCE_PCLK1 ((RCC_CCIPR_USART3SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as USART3 clock source */ +#define LL_RCC_USART3_CLKSOURCE_SYSCLK ((RCC_CCIPR_USART3SEL << 16U) | RCC_CCIPR_USART3SEL_0) /*!< SYSCLK clock used as USART3 clock source */ +#define LL_RCC_USART3_CLKSOURCE_HSI ((RCC_CCIPR_USART3SEL << 16U) | RCC_CCIPR_USART3SEL_1) /*!< HSI clock used as USART3 clock source */ +#define LL_RCC_USART3_CLKSOURCE_LSE ((RCC_CCIPR_USART3SEL << 16U) | RCC_CCIPR_USART3SEL) /*!< LSE clock used as USART3 clock source */ +#endif /* RCC_CCIPR_USART3SEL */ +/** + * @} + */ + +#if defined(LPUART1) || defined(LPUART2) +/** @defgroup RCC_LL_EC_LPUARTx_CLKSOURCE Peripheral LPUART clock source selection + * @{ + */ +#if defined(LPUART2) +#define LL_RCC_LPUART2_CLKSOURCE_PCLK1 ((RCC_CCIPR_LPUART2SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as LPUART2 clock source */ +#define LL_RCC_LPUART2_CLKSOURCE_SYSCLK ((RCC_CCIPR_LPUART2SEL << 16U) | RCC_CCIPR_LPUART2SEL_0) /*!< SYSCLK clock used as LPUART2 clock source */ +#define LL_RCC_LPUART2_CLKSOURCE_HSI ((RCC_CCIPR_LPUART2SEL << 16U) | RCC_CCIPR_LPUART2SEL_1) /*!< HSI clock used as LPUART2 clock source */ +#define LL_RCC_LPUART2_CLKSOURCE_LSE ((RCC_CCIPR_LPUART2SEL << 16U) | RCC_CCIPR_LPUART2SEL) /*!< LSE clock used as LPUART2 clock source */ +#endif /* LPUART2 */ +#define LL_RCC_LPUART1_CLKSOURCE_PCLK1 ((RCC_CCIPR_LPUART1SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as LPUART1 clock source */ +#define LL_RCC_LPUART1_CLKSOURCE_SYSCLK ((RCC_CCIPR_LPUART1SEL << 16U) | RCC_CCIPR_LPUART1SEL_0) /*!< SYSCLK clock used as LPUART1 clock source */ +#define LL_RCC_LPUART1_CLKSOURCE_HSI ((RCC_CCIPR_LPUART1SEL << 16U) | RCC_CCIPR_LPUART1SEL_1) /*!< HSI clock used as LPUART1 clock source */ +#define LL_RCC_LPUART1_CLKSOURCE_LSE ((RCC_CCIPR_LPUART1SEL << 16U) | RCC_CCIPR_LPUART1SEL) /*!< LSE clock used as LPUART1 clock source */ +/** + * @} + */ +#endif /* LPUART1 || LPUART2 */ + +/** @defgroup RCC_LL_EC_I2Cx_CLKSOURCE Peripheral I2C clock source selection + * @{ + */ +#define LL_RCC_I2C1_CLKSOURCE_PCLK1 ((RCC_CCIPR_I2C1SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as I2C1 clock source */ +#define LL_RCC_I2C1_CLKSOURCE_SYSCLK ((RCC_CCIPR_I2C1SEL << 16U) | RCC_CCIPR_I2C1SEL_0) /*!< SYSCLK clock used as I2C1 clock source */ +#define LL_RCC_I2C1_CLKSOURCE_HSI ((RCC_CCIPR_I2C1SEL << 16U) | RCC_CCIPR_I2C1SEL_1) /*!< HSI clock used as I2C1 clock source */ +#if defined(RCC_CCIPR_I2C2SEL) +#define LL_RCC_I2C2_CLKSOURCE_PCLK1 ((RCC_CCIPR_I2C2SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as I2C2 clock source */ +#define LL_RCC_I2C2_CLKSOURCE_SYSCLK ((RCC_CCIPR_I2C2SEL << 16U) | RCC_CCIPR_I2C2SEL_0) /*!< SYSCLK clock used as I2C2 clock source */ +#define LL_RCC_I2C2_CLKSOURCE_HSI ((RCC_CCIPR_I2C2SEL << 16U) | RCC_CCIPR_I2C2SEL_1) /*!< HSI clock used as I2C2 clock source */ +#endif /* RCC_CCIPR_I2C2SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_I2Sx_CLKSOURCE Peripheral I2S clock source selection + * @{ + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define LL_RCC_I2S1_CLKSOURCE_SYSCLK ((RCC_CCIPR2_I2S1SEL << 16U) | 0x00000000U) /*!< SYSCLK clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_PLL ((RCC_CCIPR2_I2S1SEL << 16U) | RCC_CCIPR2_I2S1SEL_0) /*!< PLL clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_HSI ((RCC_CCIPR2_I2S1SEL << 16U) | RCC_CCIPR2_I2S1SEL_1) /*!< HSI clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_PIN ((RCC_CCIPR2_I2S1SEL << 16U) | RCC_CCIPR2_I2S1SEL) /*!< External clock used as I2S1 clock source */ +#define LL_RCC_I2S2_CLKSOURCE_SYSCLK ((RCC_CCIPR2_I2S2SEL << 16U) | 0x00000000U) /*!< SYSCLK clock used as I2S2 clock source */ +#define LL_RCC_I2S2_CLKSOURCE_PLL ((RCC_CCIPR2_I2S2SEL << 16U) | RCC_CCIPR2_I2S2SEL_0) /*!< PLL clock used as I2S2 clock source */ +#define LL_RCC_I2S2_CLKSOURCE_HSI ((RCC_CCIPR2_I2S2SEL << 16U) | RCC_CCIPR2_I2S2SEL_1) /*!< HSI clock used as I2S2 clock source */ +#define LL_RCC_I2S2_CLKSOURCE_PIN ((RCC_CCIPR2_I2S2SEL << 16U) | RCC_CCIPR2_I2S2SEL) /*!< External clock used as I2S2 clock source */ +#else +#define LL_RCC_I2S1_CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_PLL RCC_CCIPR_I2S1SEL_0 /*!< PLL clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_HSI RCC_CCIPR_I2S1SEL_1 /*!< HSI clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_PIN RCC_CCIPR_I2S1SEL /*!< External clock used as I2S1 clock source */ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +/** + * @} + */ + +#if defined(RCC_CCIPR_TIM1SEL) +/** @defgroup RCC_LL_EC_TIMx_CLKSOURCE Peripheral TIM clock source selection + * @{ + */ +#define LL_RCC_TIM1_CLKSOURCE_PCLK1 (RCC_CCIPR_TIM1SEL | (0x00000000U >> 16U)) /*!< PCLK1 clock used as TIM1 clock source */ +#define LL_RCC_TIM1_CLKSOURCE_PLL (RCC_CCIPR_TIM1SEL | (RCC_CCIPR_TIM1SEL >> 16U)) /*!< PLL used as TIM1 clock source */ +/** + * @} + */ +#endif /* RCC_CCIPR_TIM1SEL */ + +#if defined(RCC_CCIPR_TIM15SEL) +/** @addtogroup RCC_LL_EC_TIMx_CLKSOURCE + * @{ + */ +#define LL_RCC_TIM15_CLKSOURCE_PCLK1 (RCC_CCIPR_TIM15SEL | (0x00000000U >> 16U)) /*!< PCLK1 clock used as TIM15 clock source */ +#define LL_RCC_TIM15_CLKSOURCE_PLL (RCC_CCIPR_TIM15SEL | (RCC_CCIPR_TIM15SEL >> 16U)) /*!< PLL used as TIM15 clock source */ +/** + * @} + */ +#endif /* RCC_CCIPR_TIM15SEL */ + +#if defined(LPTIM1) && defined(LPTIM2) +/** @defgroup RCC_LL_EC_LPTIMx_CLKSOURCE Peripheral LPTIM clock source selection + * @{ + */ +#define LL_RCC_LPTIM1_CLKSOURCE_PCLK1 (RCC_CCIPR_LPTIM1SEL | (0x00000000U >> 16U)) /*!< PCLK1 selected as LPTIM1 clock */ +#define LL_RCC_LPTIM1_CLKSOURCE_LSI (RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL_0 >> 16U)) /*!< LSI selected as LPTIM1 clock */ +#define LL_RCC_LPTIM1_CLKSOURCE_HSI (RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL_1 >> 16U)) /*!< HSI selected as LPTIM1 clock */ +#define LL_RCC_LPTIM1_CLKSOURCE_LSE (RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL >> 16U)) /*!< LSE selected as LPTIM1 clock */ +#define LL_RCC_LPTIM2_CLKSOURCE_PCLK1 (RCC_CCIPR_LPTIM2SEL | (0x00000000U >> 16U)) /*!< PCLK1 selected as LPTIM2 clock */ +#define LL_RCC_LPTIM2_CLKSOURCE_LSI (RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL_0 >> 16U)) /*!< LSI selected as LPTIM2 clock */ +#define LL_RCC_LPTIM2_CLKSOURCE_HSI (RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL_1 >> 16U)) /*!< HSI selected as LPTIM2 clock */ +#define LL_RCC_LPTIM2_CLKSOURCE_LSE (RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL >> 16U)) /*!< LSE selected as LPTIM2 clock */ +/** + * @} + */ +#endif /* LPTIM1 && LPTIM2*/ + +#if defined(CEC) +/** @defgroup RCC_LL_EC_CEC_CLKSOURCE_HSI Peripheral CEC clock source selection + * @{ + */ +#define LL_RCC_CEC_CLKSOURCE_HSI_DIV488 0x00000000U /*!< HSI oscillator clock divided by 488 used as CEC clock */ +#define LL_RCC_CEC_CLKSOURCE_LSE RCC_CCIPR_CECSEL /*!< LSE oscillator clock used as CEC clock */ + +/** + * @} + */ +#endif /* CEC */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** @defgroup RCC_LL_EC_FDCAN_CLKSOURCE_HSI Peripheral FDCAN clock source selection + * @{ + */ +#define LL_RCC_FDCAN_CLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 oscillator clock used as FDCAN clock */ +#define LL_RCC_FDCAN_CLKSOURCE_PLL RCC_CCIPR2_FDCANSEL_0 /*!< PLL "Q" oscillator clock used as FDCAN clock */ +#define LL_RCC_FDCAN_CLKSOURCE_HSE RCC_CCIPR2_FDCANSEL_1 /*!< HSE oscillator clock used as FDCAN clock */ + +/** + * @} + */ +#endif /* FDCAN1 || FDCAN2 */ + +#if defined(RNG) +/** @defgroup RCC_LL_EC_RNG_CLKSOURCE Peripheral RNG clock source selection + * @{ + */ +#define LL_RCC_RNG_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RNG clock */ +#define LL_RCC_RNG_CLKSOURCE_HSI_DIV8 RCC_CCIPR_RNGSEL_0 /*!< HSI oscillator clock divided by 8 used as RNG clock, available on cut2.0 */ +#define LL_RCC_RNG_CLKSOURCE_SYSCLK RCC_CCIPR_RNGSEL_1 /*!< SYSCLK divided by 1 used as RNG clock */ +#define LL_RCC_RNG_CLKSOURCE_PLL RCC_CCIPR_RNGSEL /*!< PLL used as RNG clock */ +/** + * @} + */ +#endif /* RNG */ + +#if defined(RNG) +/** @defgroup RCC_LL_EC_RNG_CLK_DIV Peripheral RNG clock division factor + * @{ + */ +#define LL_RCC_RNG_CLK_DIV1 0x00000000U /*!< RNG clock not divided */ +#define LL_RCC_RNG_CLK_DIV2 RCC_CCIPR_RNGDIV_0 /*!< RNG clock divided by 2 */ +#define LL_RCC_RNG_CLK_DIV4 RCC_CCIPR_RNGDIV_1 /*!< RNG clock divided by 4 */ +#define LL_RCC_RNG_CLK_DIV8 RCC_CCIPR_RNGDIV /*!< RNG clock divided by 8 */ +/** + * @} + */ +#endif /* RNG */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** @defgroup RCC_LL_EC_USB_CLKSOURCE Peripheral USB clock source selection + * @{ + */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_USB_CLKSOURCE_HSI48 0x00000000U /*!< HSI48 clock used as USB clock source */ +#endif /* RCC_HSI48_SUPPORT */ +#define LL_RCC_USB_CLKSOURCE_HSE RCC_CCIPR2_USBSEL_0 /*!< PLL clock used as USB clock source */ +#define LL_RCC_USB_CLKSOURCE_PLL RCC_CCIPR2_USBSEL_1 /*!< PLL clock used as USB clock source */ +/** + * @} + */ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +/** @defgroup RCC_LL_EC_ADC_CLKSOURCE Peripheral ADC clock source selection + * @{ + */ +#define LL_RCC_ADC_CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK used as ADC clock */ +#define LL_RCC_ADC_CLKSOURCE_PLL RCC_CCIPR_ADCSEL_0 /*!< PLL used as ADC clock */ +#define LL_RCC_ADC_CLKSOURCE_HSI RCC_CCIPR_ADCSEL_1 /*!< HSI used as ADC clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_USARTx Peripheral USARTx get clock source + * @{ + */ +#define LL_RCC_USART1_CLKSOURCE RCC_CCIPR_USART1SEL /*!< USART1 Clock source selection */ +#if defined(RCC_CCIPR_USART2SEL) +#define LL_RCC_USART2_CLKSOURCE RCC_CCIPR_USART2SEL /*!< USART2 Clock source selection */ +#endif /* RCC_CCIPR_USART2SEL */ +#if defined(RCC_CCIPR_USART3SEL) +#define LL_RCC_USART3_CLKSOURCE RCC_CCIPR_USART3SEL /*!< USART3 Clock source selection */ +#endif /* RCC_CCIPR_USART3SEL */ +/** + * @} + */ + +#if defined(LPUART1) +/** @defgroup RCC_LL_EC_LPUART1 Peripheral LPUART get clock source + * @{ + */ +#define LL_RCC_LPUART1_CLKSOURCE RCC_CCIPR_LPUART1SEL /*!< LPUART1 Clock source selection */ +#if defined(LPUART2) +#define LL_RCC_LPUART2_CLKSOURCE RCC_CCIPR_LPUART2SEL /*!< LPUART2 Clock source selection */ +#endif /* LPUART2 */ +/** + * @} + */ +#endif /* LPUART1 */ + +/** @defgroup RCC_LL_EC_I2C1 Peripheral I2C get clock source + * @{ + */ +#define LL_RCC_I2C1_CLKSOURCE RCC_CCIPR_I2C1SEL /*!< I2C1 Clock source selection */ +#if defined(RCC_CCIPR_I2C2SEL) +#define LL_RCC_I2C2_CLKSOURCE RCC_CCIPR_I2C2SEL /*!< I2C2 Clock source selection */ +#endif /* RCC_CCIPR_I2C2SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_I2S1 Peripheral I2S get clock source + * @{ + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define LL_RCC_I2S1_CLKSOURCE RCC_CCIPR2_I2S1SEL /*!< I2S1 Clock source selection */ +#define LL_RCC_I2S2_CLKSOURCE RCC_CCIPR2_I2S2SEL /*!< I2S2 Clock source selection */ +#else +#define LL_RCC_I2S1_CLKSOURCE RCC_CCIPR_I2S1SEL /*!< I2S1 Clock source selection */ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +/** + * @} + */ + +#if defined(RCC_CCIPR_TIM1SEL) +/** @defgroup RCC_LL_EC_TIMx Peripheral TIMx get clock source + * @{ + */ +#define LL_RCC_TIM1_CLKSOURCE RCC_CCIPR_TIM1SEL /*!< TIM1 Clock source selection */ +#if defined(RCC_CCIPR_TIM15SEL) +#define LL_RCC_TIM15_CLKSOURCE RCC_CCIPR_TIM15SEL /*!< TIM15 Clock source selection */ +#endif /* RCC_CCIPR_TIM15SEL */ +/** + * @} + */ +#endif /* RCC_CCIPR_TIM1SEL */ + +#if defined(LPTIM1) && defined(LPTIM2) +/** @defgroup RCC_LL_EC_LPTIM1 Peripheral LPTIM get clock source + * @{ + */ +#define LL_RCC_LPTIM1_CLKSOURCE RCC_CCIPR_LPTIM1SEL /*!< LPTIM2 Clock source selection */ +#define LL_RCC_LPTIM2_CLKSOURCE RCC_CCIPR_LPTIM2SEL /*!< LPTIM2 Clock source selection */ +/** + * @} + */ +#endif /* LPTIM1 && LPTIM2 */ + +#if defined(CEC) +/** @defgroup RCC_LL_EC_CEC Peripheral CEC get clock source + * @{ + */ +#define LL_RCC_CEC_CLKSOURCE RCC_CCIPR_CECSEL /*!< CEC Clock source selection */ +/** + * @} + */ +#endif /* CEC */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** @defgroup RCC_LL_EC_FDCAN Peripheral FDCAN get clock source + * @{ + */ +#define LL_RCC_FDCAN_CLKSOURCE RCC_CCIPR2_FDCANSEL /*!< FDCAN Clock source selection */ +/** + * @} + */ +#endif /* FDCAN1 */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** @defgroup RCC_LL_EC_USB Peripheral USB get clock source + * @{ + */ +#define LL_RCC_USB_CLKSOURCE RCC_CCIPR2_USBSEL /*!< USB Clock source selection */ +/** + * @} + */ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(RNG) +/** @defgroup RCC_LL_EC_RNG Peripheral RNG get clock source + * @{ + */ +#define LL_RCC_RNG_CLKSOURCE RCC_CCIPR_RNGSEL /*!< RNG Clock source selection */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_RNG_DIV Peripheral RNG get clock division factor + * @{ + */ +#define LL_RCC_RNG_CLKDIV RCC_CCIPR_RNGDIV /*!< RNG Clock division factor */ +/** + * @} + */ +#endif /* RNG */ + +/** @defgroup RCC_LL_EC_ADC Peripheral ADC get clock source + * @{ + */ +#define LL_RCC_ADC_CLKSOURCE RCC_CCIPR_ADCSEL /*!< ADC Clock source selection */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection + * @{ + */ +#define LL_RCC_RTC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by 32 used as RTC clock */ +/** + * @} + */ + + +/** @defgroup RCC_LL_EC_PLLSOURCE PLL entry clock source + * @{ + */ +#define LL_RCC_PLLSOURCE_NONE 0x00000000U /*!< No clock */ +#define LL_RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI /*!< HSI16 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE /*!< HSE clock selected as PLL entry clock source */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLM_DIV PLL division factor (PLLM) + * @{ + */ +#define LL_RCC_PLLM_DIV_1 0x00000000U /*!< PLL division factor by 1 */ +#define LL_RCC_PLLM_DIV_2 (RCC_PLLCFGR_PLLM_0) /*!< PLL division factor by 2 */ +#define LL_RCC_PLLM_DIV_3 (RCC_PLLCFGR_PLLM_1) /*!< PLL division factor by 3 */ +#define LL_RCC_PLLM_DIV_4 ((RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0)) /*!< PLL division factor by 4 */ +#define LL_RCC_PLLM_DIV_5 (RCC_PLLCFGR_PLLM_2) /*!< PLL division factor by 5 */ +#define LL_RCC_PLLM_DIV_6 ((RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0)) /*!< PLL division factor by 6 */ +#define LL_RCC_PLLM_DIV_7 ((RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1)) /*!< PLL division factor by 7 */ +#define LL_RCC_PLLM_DIV_8 (RCC_PLLCFGR_PLLM) /*!< PLL division factor by 8 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLR_DIV PLL division factor (PLLR) + * @{ + */ +#define LL_RCC_PLLR_DIV_2 (RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 2 */ +#define LL_RCC_PLLR_DIV_3 (RCC_PLLCFGR_PLLR_1) /*!< Main PLL division factor for PLLCLK (system clock) by 3 */ +#define LL_RCC_PLLR_DIV_4 (RCC_PLLCFGR_PLLR_1|RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 4 */ +#define LL_RCC_PLLR_DIV_5 (RCC_PLLCFGR_PLLR_2) /*!< Main PLL division factor for PLLCLK (system clock) by 5 */ +#define LL_RCC_PLLR_DIV_6 (RCC_PLLCFGR_PLLR_2|RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 6 */ +#define LL_RCC_PLLR_DIV_7 (RCC_PLLCFGR_PLLR_2|RCC_PLLCFGR_PLLR_1) /*!< Main PLL division factor for PLLCLK (system clock) by 7 */ +#define LL_RCC_PLLR_DIV_8 (RCC_PLLCFGR_PLLR) /*!< Main PLL division factor for PLLCLK (system clock) by 8 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLP_DIV PLL division factor (PLLP) + * @{ + */ +#define LL_RCC_PLLP_DIV_2 (RCC_PLLCFGR_PLLP_0) /*!< Main PLL division factor for PLLP output by 2 */ +#define LL_RCC_PLLP_DIV_3 (RCC_PLLCFGR_PLLP_1) /*!< Main PLL division factor for PLLP output by 3 */ +#define LL_RCC_PLLP_DIV_4 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1) /*!< Main PLL division factor for PLLP output by 4 */ +#define LL_RCC_PLLP_DIV_5 (RCC_PLLCFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 5 */ +#define LL_RCC_PLLP_DIV_6 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 6 */ +#define LL_RCC_PLLP_DIV_7 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 7 */ +#define LL_RCC_PLLP_DIV_8 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 8 */ +#define LL_RCC_PLLP_DIV_9 (RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 9 */ +#define LL_RCC_PLLP_DIV_10 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 10 */ +#define LL_RCC_PLLP_DIV_11 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 11 */ +#define LL_RCC_PLLP_DIV_12 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 12 */ +#define LL_RCC_PLLP_DIV_13 (RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 13 */ +#define LL_RCC_PLLP_DIV_14 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 14 */ +#define LL_RCC_PLLP_DIV_15 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 15 */ +#define LL_RCC_PLLP_DIV_16 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3)/*!< Main PLL division factor for PLLP output by 16 */ +#define LL_RCC_PLLP_DIV_17 (RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 17 */ +#define LL_RCC_PLLP_DIV_18 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 18 */ +#define LL_RCC_PLLP_DIV_19 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 19 */ +#define LL_RCC_PLLP_DIV_20 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 20 */ +#define LL_RCC_PLLP_DIV_21 (RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 21 */ +#define LL_RCC_PLLP_DIV_22 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 22 */ +#define LL_RCC_PLLP_DIV_23 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 23 */ +#define LL_RCC_PLLP_DIV_24 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 24 */ +#define LL_RCC_PLLP_DIV_25 (RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 25 */ +#define LL_RCC_PLLP_DIV_26 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 26 */ +#define LL_RCC_PLLP_DIV_27 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 27*/ +#define LL_RCC_PLLP_DIV_28 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 28 */ +#define LL_RCC_PLLP_DIV_29 (RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 29 */ +#define LL_RCC_PLLP_DIV_30 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 30 */ +#define LL_RCC_PLLP_DIV_31 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 31 */ +#define LL_RCC_PLLP_DIV_32 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 32 */ +/** + * @} + */ + +#if defined(RCC_PLLQ_SUPPORT) +/** @defgroup RCC_LL_EC_PLLQ_DIV PLL division factor (PLLQ) + * @{ + */ +#define LL_RCC_PLLQ_DIV_2 (RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 2 */ +#define LL_RCC_PLLQ_DIV_3 (RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 3 */ +#define LL_RCC_PLLQ_DIV_4 (RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 4 */ +#define LL_RCC_PLLQ_DIV_5 (RCC_PLLCFGR_PLLQ_2) /*!< Main PLL division factor for PLLQ output by 5 */ +#define LL_RCC_PLLQ_DIV_6 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 6 */ +#define LL_RCC_PLLQ_DIV_7 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 7 */ +#define LL_RCC_PLLQ_DIV_8 (RCC_PLLCFGR_PLLQ) /*!< Main PLL division factor for PLLQ output by 8 */ +/** + * @} + */ +#endif /* RCC_PLLQ_SUPPORT */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RCC register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG((RCC->__REG__), (__VALUE__)) + +/** + * @brief Read a value in RCC register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__) +/** + * @} + */ + +/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies + * @{ + */ + +/** + * @brief Helper macro to calculate the PLLCLK frequency on system domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLR__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_3 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_5 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_7 + * @arg @ref LL_RCC_PLLR_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos) + 1U)) + +/** + * @brief Helper macro to calculate the PLLPCLK frequency used on I2S domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_I2S1_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLP__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_I2S1_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos) + 1U)) + +#if defined(RCC_CCIPR2_I2S2SEL) +/** + * @brief Helper macro to calculate the PLLPCLK frequency used on I2S2 domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_I2S2_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLP__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_I2S2_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos) + 1U)) +#endif /* RCC_CCIPR2_I2S2SEL */ + +/** + * @brief Helper macro to calculate the PLLPCLK frequency used on ADC domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_ADC_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLP__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_ADC_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos) + 1U)) + +#if defined(RNG) +/** + * @brief Helper macro to calculate the PLLQCLK frequency used on RNG domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_RNG_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLQ__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_RNG_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U)) +#endif /* RNG */ + +#if defined(RCC_PLLQ_SUPPORT) +/** + * @brief Helper macro to calculate the PLLQCLK frequency used on TIM1 domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_TIM1_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLQ__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_TIM1_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U)) +#if defined(TIM15) +/** + * @brief Helper macro to calculate the PLLQCLK frequency used on TIM15 domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_TIM15_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLQ__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_TIM15_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U)) +#endif /* TIM15 */ +#endif /* RCC_PLLQ_SUPPORT */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** + * @brief Helper macro to calculate the PLLQCLK frequency used on FDCAN domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_FDCAN_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLQ__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_FDCAN_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U)) +#endif /* FDCAN1 || FDCAN2 */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Helper macro to calculate the PLLQCLK frequency used on USB domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_USB_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLQ__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_USB_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) \ + ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U)) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +/** + * @brief Helper macro to calculate the HCLK frequency + * @param __SYSCLKFREQ__ SYSCLK frequency (based on HSE/HSI/PLLCLK) + * @param __AHBPRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval HCLK clock frequency (in Hz) + */ +#define __LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__,__AHBPRESCALER__) \ + ((__SYSCLKFREQ__) >> (AHBPrescTable[((__AHBPRESCALER__) & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos] & 0x1FU)) + +/** + * @brief Helper macro to calculate the PCLK1 frequency (ABP1) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB1PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval PCLK1 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) \ + ((__HCLKFREQ__) >> (APBPrescTable[(__APB1PRESCALER__) >> RCC_CFGR_PPRE_Pos] & 0x1FU)) + +/** + * @brief Helper macro to calculate the HSISYS frequency + * @param __HSIDIV__ This parameter can be one of the following values: + * @arg @ref LL_RCC_HSI_DIV_1 + * @arg @ref LL_RCC_HSI_DIV_2 + * @arg @ref LL_RCC_HSI_DIV_4 + * @arg @ref LL_RCC_HSI_DIV_8 + * @arg @ref LL_RCC_HSI_DIV_16 + * @arg @ref LL_RCC_HSI_DIV_32 + * @arg @ref LL_RCC_HSI_DIV_64 + * @arg @ref LL_RCC_HSI_DIV_128 + * @retval HSISYS clock frequency (in Hz) + */ +#define __LL_RCC_CALC_HSI_FREQ(__HSIDIV__) (HSI_VALUE / (1U << ((__HSIDIV__)>> RCC_CR_HSIDIV_Pos))) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_LL_EF_HSE HSE + * @{ + */ + +/** + * @brief Enable the Clock Security System. + * @rmtoll CR CSSON LL_RCC_HSE_EnableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSSON); +} + +/** + * @brief Enable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Disable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Enable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Disable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Check if HSE oscillator Ready + * @rmtoll CR HSERDY LL_RCC_HSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSERDY) == (RCC_CR_HSERDY)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_HSI HSI + * @{ + */ + +/** + * @brief Enable HSI even in stop mode + * @note HSI oscillator is forced ON even in Stop mode + * @rmtoll CR HSIKERON LL_RCC_HSI_EnableInStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_EnableInStopMode(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSIKERON); +} + +/** + * @brief Disable HSI in stop mode + * @rmtoll CR HSIKERON LL_RCC_HSI_DisableInStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_DisableInStopMode(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON); +} + +/** + * @brief Check if HSI in stop mode is enabled + * @rmtoll CR HSIKERON LL_RCC_HSI_IsEnabledInStopMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsEnabledInStopMode(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSIKERON) == (RCC_CR_HSIKERON)) ? 1UL : 0UL); +} + +/** + * @brief Enable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Disable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Check if HSI clock is ready + * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSIRDY) == (RCC_CR_HSIRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get HSI Calibration value + * @note When HSITRIM is written, HSICAL is updated with the sum of + * HSITRIM and the factory trim value + * @rmtoll ICSCR HSICAL LL_RCC_HSI_GetCalibration + * @retval Between Min_Data = 0x00 and Max_Data = 0xFF + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_HSICAL) >> RCC_ICSCR_HSICAL_Pos); +} + +/** + * @brief Set HSI Calibration trimming + * @note user-programmable trimming value that is added to the HSICAL + * @note Default value is 64, which, when added to the HSICAL value, + * should trim the HSI to 16 MHz +/- 1 % + * @rmtoll ICSCR HSITRIM LL_RCC_HSI_SetCalibTrimming + * @param Value Between Min_Data = 0 and Max_Data = 127 + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value) +{ + MODIFY_REG(RCC->ICSCR, RCC_ICSCR_HSITRIM, Value << RCC_ICSCR_HSITRIM_Pos); +} + +/** + * @brief Get HSI Calibration trimming + * @rmtoll ICSCR HSITRIM LL_RCC_HSI_GetCalibTrimming + * @retval Between Min_Data = 0 and Max_Data = 127 + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void) +{ + return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_HSITRIM) >> RCC_ICSCR_HSITRIM_Pos); +} + +/** + * @} + */ + +#if defined(RCC_HSI48_SUPPORT) +/** @defgroup RCC_LL_EF_HSI48 HSI48 + * @{ + */ + +/** + * @brief Enable HSI48 + * @rmtoll CR HSI48ON LL_RCC_HSI48_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI48_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSI48ON); +} + +/** + * @brief Disable HSI48 + * @rmtoll CR HSI48ON LL_RCC_HSI48_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI48_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSI48ON); +} + +/** + * @brief Check if HSI48 oscillator Ready + * @rmtoll CR HSI48RDY LL_RCC_HSI48_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI48_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSI48RDY) == RCC_CR_HSI48RDY) ? 1UL : 0UL); +} + +/** + * @brief Get HSI48 Calibration value + * @rmtoll CRRCR HSI48CAL LL_RCC_HSI48_GetCalibration + * @retval Between Min_Data = 0x00 and Max_Data = 0x1FF + */ +__STATIC_INLINE uint32_t LL_RCC_HSI48_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48CAL) >> RCC_CRRCR_HSI48CAL_Pos); +} + +/** + * @} + */ +#endif /* RCC_HSI48_SUPPORT */ + +/** @defgroup RCC_LL_EF_LSE LSE + * @{ + */ + +/** + * @brief Enable Low Speed External (LSE) crystal. + * @rmtoll BDCR LSEON LL_RCC_LSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Enable(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); +} + +/** + * @brief Disable Low Speed External (LSE) crystal. + * @rmtoll BDCR LSEON LL_RCC_LSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Disable(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); +} + +/** + * @brief Enable external clock source (LSE bypass). + * @rmtoll BDCR LSEBYP LL_RCC_LSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); +} + +/** + * @brief Disable external clock source (LSE bypass). + * @rmtoll BDCR LSEBYP LL_RCC_LSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); +} + +/** + * @brief Set LSE oscillator drive capability + * @note The oscillator is in Xtal mode when it is not in bypass mode. + * @rmtoll BDCR LSEDRV LL_RCC_LSE_SetDriveCapability + * @param LSEDrive This parameter can be one of the following values: + * @arg @ref LL_RCC_LSEDRIVE_LOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH + * @arg @ref LL_RCC_LSEDRIVE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_SetDriveCapability(uint32_t LSEDrive) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, LSEDrive); +} + +/** + * @brief Get LSE oscillator drive capability + * @rmtoll BDCR LSEDRV LL_RCC_LSE_GetDriveCapability + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LSEDRIVE_LOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH + * @arg @ref LL_RCC_LSEDRIVE_HIGH + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_GetDriveCapability(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSEDRV)); +} + +/** + * @brief Enable Clock security system on LSE. + * @rmtoll BDCR LSECSSON LL_RCC_LSE_EnableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableCSS(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON); +} + +/** + * @brief Disable Clock security system on LSE. + * @note Clock security system can be disabled only after a LSE + * failure detection. In that case it MUST be disabled by software. + * @rmtoll BDCR LSECSSON LL_RCC_LSE_DisableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisableCSS(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSECSSON); +} + +/** + * @brief Check if LSE oscillator Ready + * @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == (RCC_BDCR_LSERDY)) ? 1UL : 0UL); +} + +/** + * @brief Check if CSS on LSE failure Detection + * @rmtoll BDCR LSECSSD LL_RCC_LSE_IsCSSDetected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsCSSDetected(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_LSECSSD) == (RCC_BDCR_LSECSSD)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSI LSI + * @{ + */ + +/** + * @brief Enable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Enable(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Disable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Disable(void) +{ + CLEAR_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Check if LSI is Ready + * @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == (RCC_CSR_LSIRDY)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSCO LSCO + * @{ + */ + +/** + * @brief Enable Low speed clock + * @rmtoll BDCR LSCOEN LL_RCC_LSCO_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSCO_Enable(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSCOEN); +} + +/** + * @brief Disable Low speed clock + * @rmtoll BDCR LSCOEN LL_RCC_LSCO_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSCO_Disable(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSCOEN); +} + +/** + * @brief Configure Low speed clock selection + * @rmtoll BDCR LSCOSEL LL_RCC_LSCO_SetSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSI + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSCO_SetSource(uint32_t Source) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSCOSEL, Source); +} + +/** + * @brief Get Low speed clock selection + * @rmtoll BDCR LSCOSEL LL_RCC_LSCO_GetSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSI + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_LSCO_GetSource(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSCOSEL)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_System System + * @{ + */ + +/** + * @brief Configure the system clock source + * @rmtoll CFGR SW LL_RCC_SetSysClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_PLL + * @arg @ref LL_RCC_SYS_CLKSOURCE_LSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source); +} + +/** + * @brief Get the system clock source + * @rmtoll CFGR SWS LL_RCC_GetSysClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_LSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)); +} + +/** + * @brief Set AHB prescaler + * @rmtoll CFGR HPRE LL_RCC_SetAHBPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, Prescaler); +} + +/** + * @brief Set APB1 prescaler + * @rmtoll CFGR PPRE LL_RCC_SetAPB1Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, Prescaler); +} + +/** + * @brief Set HSI16 division factor + * @rmtoll CR HSIDIV LL_RCC_SetHSIDiv + * @note HSIDIV parameter is only applied to SYSCLK_Frequency when HSI is used as + * system clock source. + * @param HSIDiv This parameter can be one of the following values: + * @arg @ref LL_RCC_HSI_DIV_1 + * @arg @ref LL_RCC_HSI_DIV_2 + * @arg @ref LL_RCC_HSI_DIV_4 + * @arg @ref LL_RCC_HSI_DIV_8 + * @arg @ref LL_RCC_HSI_DIV_16 + * @arg @ref LL_RCC_HSI_DIV_32 + * @arg @ref LL_RCC_HSI_DIV_64 + * @arg @ref LL_RCC_HSI_DIV_128 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetHSIDiv(uint32_t HSIDiv) +{ + MODIFY_REG(RCC->CR, RCC_CR_HSIDIV, HSIDiv); +} +/** + * @brief Get AHB prescaler + * @rmtoll CFGR HPRE LL_RCC_GetAHBPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE)); +} + +/** + * @brief Get APB1 prescaler + * @rmtoll CFGR PPRE LL_RCC_GetAPB1Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE)); +} + +/** + * @brief Get HSI16 Division factor + * @rmtoll CR HSIDIV LL_RCC_GetHSIDiv + * @note HSIDIV parameter is only applied to SYSCLK_Frequency when HSI is used as + * system clock source. + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_HSI_DIV_1 + * @arg @ref LL_RCC_HSI_DIV_2 + * @arg @ref LL_RCC_HSI_DIV_4 + * @arg @ref LL_RCC_HSI_DIV_8 + * @arg @ref LL_RCC_HSI_DIV_16 + * @arg @ref LL_RCC_HSI_DIV_32 + * @arg @ref LL_RCC_HSI_DIV_64 + * @arg @ref LL_RCC_HSI_DIV_128 + */ +__STATIC_INLINE uint32_t LL_RCC_GetHSIDiv(void) +{ + return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSIDIV)); +} +/** + * @} + */ + +/** @defgroup RCC_LL_EF_MCO1 MCO1 + * @{ + */ + +/** + * @brief Configure MCOx + * @rmtoll CFGR MCOSEL LL_RCC_ConfigMCO\n + * CFGR MCOPRE LL_RCC_ConfigMCO + * @param MCOxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1SOURCE_NOCLOCK + * @arg @ref LL_RCC_MCO1SOURCE_SYSCLK + * @arg @ref LL_RCC_MCO1SOURCE_HSI + * @arg @ref LL_RCC_MCO1SOURCE_HSI48 (*) + * @arg @ref LL_RCC_MCO1SOURCE_HSE + * @arg @ref LL_RCC_MCO1SOURCE_PLLCLK + * @arg @ref LL_RCC_MCO1SOURCE_LSI + * @arg @ref LL_RCC_MCO1SOURCE_LSE + * @arg @ref LL_RCC_MCO1SOURCE_PLLPCLK (*) + * @arg @ref LL_RCC_MCO1SOURCE_PLLQCLK (*) + * @arg @ref LL_RCC_MCO1SOURCE_RTCCLK (*) + * @arg @ref LL_RCC_MCO1SOURCE_RTC_WKUP (*) + * + * (*) value not defined in all devices. + * @param MCOxPrescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1_DIV_1 + * @arg @ref LL_RCC_MCO1_DIV_2 + * @arg @ref LL_RCC_MCO1_DIV_4 + * @arg @ref LL_RCC_MCO1_DIV_8 + * @arg @ref LL_RCC_MCO1_DIV_32 + * @arg @ref LL_RCC_MCO1_DIV_64 + * @arg @ref LL_RCC_MCO1_DIV_128 + * @retval None + */ +__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE, MCOxSource | MCOxPrescaler); +} + +/** + * @} + */ + +#if defined(RCC_MCO2_SUPPORT) +/** @defgroup RCC_LL_EF_MCO2 MCO2 + * @{ + */ + +/** + * @brief Configure MCO2 + * @rmtoll CFGR MCO2SEL LL_RCC_ConfigMCO2\n + * CFGR MCO2PRE LL_RCC_ConfigMCO2 + * @note feature not available in all devices. + * @param MCOxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO2SOURCE_NOCLOCK + * @arg @ref LL_RCC_MCO2SOURCE_SYSCLK + * @arg @ref LL_RCC_MCO2SOURCE_HSI + * @arg @ref LL_RCC_MCO2SOURCE_HSI48 + * @arg @ref LL_RCC_MCO2SOURCE_HSE + * @arg @ref LL_RCC_MCO2SOURCE_PLLCLK + * @arg @ref LL_RCC_MCO2SOURCE_LSI + * @arg @ref LL_RCC_MCO2SOURCE_LSE + * @arg @ref LL_RCC_MCO2SOURCE_PLLPCLK + * @arg @ref LL_RCC_MCO2SOURCE_PLLQCLK + * @arg @ref LL_RCC_MCO2SOURCE_RTCCLK + * @arg @ref LL_RCC_MCO2SOURCE_RTC_WKUP + * + * @param MCOxPrescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO2_DIV_1 + * @arg @ref LL_RCC_MCO2_DIV_2 + * @arg @ref LL_RCC_MCO2_DIV_4 + * @arg @ref LL_RCC_MCO2_DIV_8 + * @arg @ref LL_RCC_MCO2_DIV_16 + * @arg @ref LL_RCC_MCO2_DIV_32 + * @arg @ref LL_RCC_MCO2_DIV_64 + * @arg @ref LL_RCC_MCO2_DIV_128 + * @arg @ref LL_RCC_MCO2_DIV_256 + * @arg @ref LL_RCC_MCO2_DIV_512 + * @arg @ref LL_RCC_MCO2_DIV_1024 + * @retval None + */ +__STATIC_INLINE void LL_RCC_ConfigMCO2(uint32_t MCOxSource, uint32_t MCOxPrescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO2SEL | RCC_CFGR_MCO2PRE, MCOxSource | MCOxPrescaler); +} + +/** + * @} + */ +#endif /* RCC_MCO2_SUPPORT */ + +/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source + * @{ + */ + +/** + * @brief Configure USARTx clock source + * @rmtoll CCIPR USARTxSEL LL_RCC_SetUSARTClockSource + * @param USARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_USART2_CLKSOURCE_HSI (*) + * @arg @ref LL_RCC_USART2_CLKSOURCE_LSE (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_HSI (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_LSE (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetUSARTClockSource(uint32_t USARTxSource) +{ + MODIFY_REG(RCC->CCIPR, (USARTxSource >> 16U), (USARTxSource & 0x0000FFFFU)); +} + +#if defined(LPUART1) +/** + * @brief Configure LPUARTx clock source + * @rmtoll CCIPR LPUART1SEL LL_RCC_SetLPUARTClockSource + * @rmtoll CCIPR LPUART2SEL LL_RCC_SetLPUARTClockSource + * @param LPUARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_HSI (*) + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_LSE (*) + * (*) feature not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetLPUARTClockSource(uint32_t LPUARTxSource) +{ + MODIFY_REG(RCC->CCIPR, (LPUARTxSource >> 16U), (LPUARTxSource & 0x0000FFFFU)); +} +#endif /* LPUART1 */ + +/** + * @brief Configure I2Cx clock source + * @rmtoll CCIPR I2C1SEL LL_RCC_SetI2CClockSource + * @param I2CxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C2_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_I2C2_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_I2C2_CLKSOURCE_HSI (*) + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetI2CClockSource(uint32_t I2CxSource) +{ + MODIFY_REG(RCC->CCIPR, (I2CxSource >> 16U), (I2CxSource & 0x0000FFFFU)); +} + +#if defined(RCC_CCIPR_TIM1SEL) || defined(RCC_CCIPR_TIM15SEL) +/** + * @brief Configure TIMx clock source + * @rmtoll CCIPR TIMxSEL LL_RCC_SetTIMClockSource + * @param TIMxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_TIM1_CLKSOURCE_PLL + * @arg @ref LL_RCC_TIM1_CLKSOURCE_PCLK1 + * @if defined(STM32G081xx) + * @arg @ref LL_RCC_TIM15_CLKSOURCE_PLL + * @arg @ref LL_RCC_TIM15_CLKSOURCE_PCLK1 + * @endif + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetTIMClockSource(uint32_t TIMxSource) +{ + MODIFY_REG(RCC->CCIPR, (TIMxSource & 0xFFFF0000U), (TIMxSource << 16)); +} +#endif /* RCC_CCIPR_TIM1SEL && RCC_CCIPR_TIM15SEL */ + +#if defined(LPTIM1) && defined(LPTIM2) +/** + * @brief Configure LPTIMx clock source + * @rmtoll CCIPR LPTIMxSEL LL_RCC_SetLPTIMClockSource + * @param LPTIMxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetLPTIMClockSource(uint32_t LPTIMxSource) +{ + MODIFY_REG(RCC->CCIPR, (LPTIMxSource & 0xFFFF0000U), (LPTIMxSource << 16U)); +} +#endif /* LPTIM1 && LPTIM2 */ + +#if defined(CEC) +/** + * @brief Configure CEC clock source + * @rmtoll CCIPR CECSEL LL_RCC_SetCECClockSource + * @param CECxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV488 + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetCECClockSource(uint32_t CECxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CECSEL, CECxSource); +} +#endif /* CEC */ + +#if defined(RCC_CCIPR_RNGDIV) +/** + * @brief Configure RNG division factor + * @rmtoll CCIPR RNGDIV LL_RCC_SetRNGClockDiv + * @param RNGxDiv This parameter can be one of the following values: + * @arg @ref LL_RCC_RNG_CLK_DIV1 + * @arg @ref LL_RCC_RNG_CLK_DIV2 + * @arg @ref LL_RCC_RNG_CLK_DIV4 + * @arg @ref LL_RCC_RNG_CLK_DIV8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRNGClockDiv(uint32_t RNGxDiv) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_RNGDIV, RNGxDiv); +} +#endif /* RNG */ + +#if defined (RCC_CCIPR_RNGSEL) +/** + * @brief Configure RNG clock source + * @rmtoll CCIPR RNGSEL LL_RCC_SetRNGClockSource + * @param RNGxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE_NONE + * @arg @ref LL_RCC_RNG_CLKSOURCE_HSI_DIV8 + * @arg @ref LL_RCC_RNG_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRNGClockSource(uint32_t RNGxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_RNGSEL, RNGxSource); +} +#endif /* RNG */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Configure USB clock source + * @rmtoll CCIPR2 CK48MSEL LL_RCC_SetUSBClockSource + * @param USBxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 + * @arg @ref LL_RCC_USB_CLKSOURCE_HSE + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t USBxSource) +{ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_USBSEL, USBxSource); +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined (FDCAN1) || defined (FDCAN2) +/** + * @brief Configure FDCAN clock source + * @rmtoll CCIPR2 FDCANSEL LL_RCC_SetFDCANClockSource + * @param FDCANxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_HSE + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_PLL + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetFDCANClockSource(uint32_t FDCANxSource) +{ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_FDCANSEL, FDCANxSource); +} +#endif /* FDCAN1 || FDCAN2 */ + +/** + * @brief Configure ADC clock source + * @rmtoll CCIPR ADCSEL LL_RCC_SetADCClockSource + * @param ADCxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL + * @arg @ref LL_RCC_ADC_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_ADC_CLKSOURCE_HSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetADCClockSource(uint32_t ADCxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_ADCSEL, ADCxSource); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Configure I2Sx clock source + * @rmtoll CCIPR2 I2SxSEL LL_RCC_SetI2SClockSource + * @param I2SxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLL + * @arg @ref LL_RCC_I2S1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2S2_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLL + * @arg @ref LL_RCC_I2S2_CLKSOURCE_HSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetI2SClockSource(uint32_t I2SxSource) +{ + MODIFY_REG(RCC->CCIPR2, (I2SxSource >> 16U), (I2SxSource & 0x0000FFFFU)); +} + +#else +/** + * @brief Configure I2Sx clock source + * @rmtoll CCIPR I2S1SEL LL_RCC_SetI2SClockSource + * @param I2SxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLL + * @arg @ref LL_RCC_I2S1_CLKSOURCE_HSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetI2SClockSource(uint32_t I2SxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2S1SEL, I2SxSource); +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +/** + * @brief Get USARTx clock source + * @rmtoll CCIPR USARTxSEL LL_RCC_GetUSARTClockSource + * @param USARTx This parameter can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE + * @arg @ref LL_RCC_USART2_CLKSOURCE + * @arg @ref LL_RCC_USART3_CLKSOURCE (*) + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_USART2_CLKSOURCE_HSI (*) + * @arg @ref LL_RCC_USART2_CLKSOURCE_LSE (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_HSI (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_LSE (*) + * (*) feature not available on all devices + */ +__STATIC_INLINE uint32_t LL_RCC_GetUSARTClockSource(uint32_t USARTx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, USARTx) | (USARTx << 16U)); +} + +#if defined (LPUART2) || defined (LPUART1) +/** + * @brief Get LPUARTx clock source + * @rmtoll CCIPR LPUART1SEL LL_RCC_GetLPUARTClockSource\n + * CCIPR LPUART2SEL LL_RCC_GetLPUARTClockSource + * @param LPUARTx This parameter can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE + * @arg @ref LL_RCC_LPUART2_CLKSOURCE (*) + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_HSI (*) + * @arg @ref LL_RCC_LPUART2_CLKSOURCE_LSE (*) + * (*) feature not available on all devices + */ +__STATIC_INLINE uint32_t LL_RCC_GetLPUARTClockSource(uint32_t LPUARTx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, LPUARTx) | (LPUARTx << 16U)); +} +#endif /* LPUART2 || LPUART1 */ + +/** + * @brief Get I2Cx clock source + * @rmtoll CCIPR I2C1SEL LL_RCC_GetI2CClockSource\n + * CCIPR I2C2SEL LL_RCC_GetI2CClockSource + * @param I2Cx This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE + * @arg @ref LL_RCC_I2C2_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C2_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C2_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2C2_CLKSOURCE_HSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetI2CClockSource(uint32_t I2Cx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, I2Cx) | (I2Cx << 16U)); +} + +#if defined(RCC_CCIPR_TIM1SEL) || defined(RCC_CCIPR_TIM15SEL) +/** + * @brief Get TIMx clock source + * @rmtoll CCIPR TIMxSEL LL_RCC_GetTIMClockSource + * @param TIMx This parameter can be one of the following values: + * @arg @ref LL_RCC_TIM1_CLKSOURCE + * @arg @ref LL_RCC_TIM15_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_TIM1_CLKSOURCE_PLL + * @arg @ref LL_RCC_TIM1_CLKSOURCE_PCLK1 + * @if defined(STM32G081xx) + * @arg @ref LL_RCC_TIM15_CLKSOURCE_PLL + * @arg @ref LL_RCC_TIM15_CLKSOURCE_PCLK1 + * @endif + */ +__STATIC_INLINE uint32_t LL_RCC_GetTIMClockSource(uint32_t TIMx) +{ + return (uint32_t)((READ_BIT(RCC->CCIPR, TIMx) >> 16U) | TIMx); +} +#endif /* RCC_CCIPR_TIM1SEL || RCC_CCIPR_TIM15SEL */ + +#if defined(LPTIM1) && defined(LPTIM2) +/** + * @brief Get LPTIMx clock source + * @rmtoll CCIPR LPTIM1SEL LL_RCC_GetLPTIMClockSource\n + CCIPR LPTIM2SEL LL_RCC_GetLPTIMClockSource + * @param LPTIMx This parameter can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetLPTIMClockSource(uint32_t LPTIMx) +{ + return (uint32_t)((READ_BIT(RCC->CCIPR, LPTIMx) >> 16U) | LPTIMx); +} +#endif /* LPTIM1 && LPTIM2 */ + +#if defined (RCC_CCIPR_CECSEL) +/** + * @brief Get CEC clock source + * @rmtoll CCIPR CECSEL LL_RCC_GetCECClockSource + * @param CECx This parameter can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV488 + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetCECClockSource(uint32_t CECx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, CECx)); +} +#endif /* CEC */ + +#if defined(RCC_CCIPR2_FDCANSEL) +/** + * @brief Get FDCAN clock source + * @rmtoll CCIPR2 FDCANSEL LL_RCC_GetFDCANClockSource + * @param FDCANx This parameter can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_HSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetFDCANClockSource(uint32_t FDCANx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR2, FDCANx)); +} +#endif /* RCC_CCIPR2_FDCANSEL */ + +#if defined(RNG) +/** + * @brief Get RNGx clock source + * @rmtoll CCIPR RNGSEL LL_RCC_GetRNGClockSource + * @param RNGx This parameter can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE_NONE + * @arg @ref LL_RCC_RNG_CLKSOURCE_HSI_DIV8 + * @arg @ref LL_RCC_RNG_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL + */ +__STATIC_INLINE uint32_t LL_RCC_GetRNGClockSource(uint32_t RNGx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, RNGx)); +} +#endif /* RNG */ + +#if defined(RNG) +/** + * @brief Get RNGx clock division factor + * @rmtoll CCIPR RNGDIV LL_RCC_GetRNGClockDiv + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RNG_CLK_DIV1 + * @arg @ref LL_RCC_RNG_CLK_DIV2 + * @arg @ref LL_RCC_RNG_CLK_DIV4 + * @arg @ref LL_RCC_RNG_CLK_DIV8 + */ +__STATIC_INLINE uint32_t LL_RCC_GetRNGClockDiv(void) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGDIV)); +} +#endif /* RNG */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Get USBx clock source + * @rmtoll CCIPR2 CK48MSEL LL_RCC_GetUSBClockSource + * @param USBx This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL + */ +__STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t USBx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR2, USBx)); +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +/** + * @brief Get ADCx clock source + * @rmtoll CCIPR ADCSEL LL_RCC_GetADCClockSource + * @param ADCx This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE_HSI + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL + * @arg @ref LL_RCC_ADC_CLKSOURCE_SYSCLK + */ +__STATIC_INLINE uint32_t LL_RCC_GetADCClockSource(uint32_t ADCx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, ADCx)); +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Get I2Sx clock source + * @rmtoll CCIPR2 I2S1SEL LL_RCC_GetI2SClockSource\n + * CCIPR2 I2S2SEL LL_RCC_GetI2SClockSource + * @param I2Sx This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE + * @arg @ref LL_RCC_I2S2_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLL + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S2_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S2_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLL + */ +__STATIC_INLINE uint32_t LL_RCC_GetI2SClockSource(uint32_t I2Sx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR2, I2Sx) | (I2Sx << 16U)); +} +#else +/** + * @brief Get I2Sx clock source + * @rmtoll CCIPR I2S1SEL LL_RCC_GetI2SClockSource + * @param I2Sx This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLL + */ +__STATIC_INLINE uint32_t LL_RCC_GetI2SClockSource(uint32_t I2Sx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, I2Sx)); +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +/** + * @} + */ + +/** @defgroup RCC_LL_EF_RTC RTC + * @{ + */ + +/** + * @brief Set RTC Clock Source + * @note Once the RTC clock source has been selected, it cannot be changed anymore unless + * the Backup domain is reset, or unless a failure is detected on LSE (LSECSSD is + * set). The BDRST bit can be used to reset them. + * @rmtoll BDCR RTCSEL LL_RCC_SetRTCClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, Source); +} + +/** + * @brief Get RTC Clock Source + * @rmtoll BDCR RTCSEL LL_RCC_GetRTCClockSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32 + */ +__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)); +} + +/** + * @brief Enable RTC + * @rmtoll BDCR RTCEN LL_RCC_EnableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableRTC(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN); +} + +/** + * @brief Disable RTC + * @rmtoll BDCR RTCEN LL_RCC_DisableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableRTC(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN); +} + +/** + * @brief Check if RTC has been enabled or not + * @rmtoll BDCR RTCEN LL_RCC_IsEnabledRTC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_RTCEN) == (RCC_BDCR_RTCEN)) ? 1UL : 0UL); +} + +/** + * @brief Force the Backup domain reset + * @rmtoll BDCR BDRST LL_RCC_ForceBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_BDRST); +} + +/** + * @brief Release the Backup domain reset + * @rmtoll BDCR BDRST LL_RCC_ReleaseBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST); +} + +/** + * @} + */ + + +/** @defgroup RCC_LL_EF_PLL PLL + * @{ + */ + +/** + * @brief Enable PLL + * @rmtoll CR PLLON LL_RCC_PLL_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLLON); +} + +/** + * @brief Disable PLL + * @note Cannot be disabled if the PLL clock is used as the system clock + * @rmtoll CR PLLON LL_RCC_PLL_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLLON); +} + +/** + * @brief Check if PLL Ready + * @rmtoll CR PLLRDY LL_RCC_PLL_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_PLLRDY) == (RCC_CR_PLLRDY)) ? 1UL : 0UL); +} + +/** + * @brief Configure PLL used for SYSCLK Domain + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLR can be written only when PLL is disabled + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SYS\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SYS\n + * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_SYS + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLR This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_3 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_5 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_7 + * @arg @ref LL_RCC_PLLR_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLR); +} + +/** + * @brief Configure PLL used for ADC domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLP can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: I2S1) + * @note This can be selected for ADC + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_ADC\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_ADC\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_ADC\n + * PLLCFGR PLLP LL_RCC_PLL_ConfigDomain_ADC + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLP This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_ADC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLP, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLP); +} + +/** + * @brief Configure PLL used for I2S1 domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLP can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: ADC) + * @note This can be selected for I2S1 + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_I2S1\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_I2S1\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_I2S1\n + * PLLCFGR PLLP LL_RCC_PLL_ConfigDomain_I2S1 + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLP This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_I2S1(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLP, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLP); +} + +#if defined(RCC_CCIPR2_I2S2SEL) +/** + * @brief Configure PLL used for I2S2 domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLP can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: ADC) + * @note This can be selected for I2S2 + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_I2S2\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_I2S2\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_I2S2\n + * PLLCFGR PLLP LL_RCC_PLL_ConfigDomain_I2S2 + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLP This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_I2S2(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLP, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLP); +} +#endif /* RCC_CCIPR2_I2S2SEL */ + +#if defined(RNG) +/** + * @brief Configure PLL used for RNG domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLQ can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: TIM1, TIM15) + * @note This can be selected for RNG + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_RNG\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_RNG\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_RNG\n + * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_RNG + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_RNG(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLQ); +} +#endif /* RNG */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** + * @brief Configure PLL used for FDCAN domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLQ can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: TIM1, TIM15) + * @note This can be selected for FDCAN + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_FDCAN\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_FDCAN\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_FDCAN\n + * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_FDCAN + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_FDCAN(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLQ); +} +#endif /* FDCAN1 || FDCAN2 */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Configure PLL used for USB domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLQ can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: TIM1, TIM15) + * @note This can be selected for USB + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_USB\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_USB\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_USB\n + * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_USB + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_USB(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLQ); +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(RCC_PLLQ_SUPPORT) +/** + * @brief Configure PLL used for TIM1 domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLQ can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: RNG, TIM15) + * @note This can be selected for TIM1 + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_TIM1\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_TIM1\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_TIM1\n + * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_TIM1 + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_TIM1(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLQ); +} +#endif /* RCC_PLLQ_SUPPORT */ + +#if defined(RCC_PLLQ_SUPPORT) && defined(TIM15) +/** + * @brief Configure PLL used for TIM15 domain clock + * @note PLL Source and PLLM Divider can be written only when PLL is disabled + * @note PLLN/PLLQ can be written only when PLL is disabled + * @note User shall verify whether the PLL configuration is not done through + * other functions (ex: RNG, TIM1) + * @note This can be selected for TIM15 + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_TIM15\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_TIM15\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_TIM15\n + * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_TIM15 + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_TIM15(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLQ); +} +#endif /* RCC_PLLQ_SUPPORT && TIM15 */ + +/** + * @brief Get Main PLL multiplication factor for VCO + * @rmtoll PLLCFGR PLLN LL_RCC_PLL_GetN + * @retval Between 8 and 86 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetN(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); +} + +/** + * @brief Get Main PLL division factor for PLLP + * @note used for PLLPCLK (ADC & I2S clock) + * @rmtoll PLLCFGR PLLP LL_RCC_PLL_GetP + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetP(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP)); +} + +#if defined(RCC_PLLQ_SUPPORT) +/** + * @brief Get Main PLL division factor for PLLQ + * @note used for PLLQCLK selected for RNG, TIM1, TIM15 clock + * @rmtoll PLLCFGR PLLQ LL_RCC_PLL_GetQ + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetQ(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ)); +} +#endif /* RCC_PLLQ_SUPPORT */ + +/** + * @brief Get Main PLL division factor for PLLR + * @note used for PLLCLK (system clock) + * @rmtoll PLLCFGR PLLR LL_RCC_PLL_GetR + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_3 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_5 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_7 + * @arg @ref LL_RCC_PLLR_DIV_8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetR(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR)); +} + +/** + * @brief Configure PLL clock source + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_SetMainSource + * @param PLLSource This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_SetMainSource(uint32_t PLLSource) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PLLSource); +} + +/** + * @brief Get the oscillator used as PLL clock source. + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_GetMainSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetMainSource(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC)); +} + +/** + * @brief Get Division factor for the main PLL and other PLL + * @rmtoll PLLCFGR PLLM LL_RCC_PLL_GetDivider + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetDivider(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM)); +} + +/** + * @brief Enable PLL output mapped on ADC domain clock + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_EnableDomain_ADC + * @note User shall check that PLL enable is not done through + * other functions (ex: I2S1) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_ADC(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN); +} + +/** + * @brief Disable PLL output mapped on ADC domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: I2S1) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_DisableDomain_ADC + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_ADC(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN); +} + +/** + * @brief Check if PLL output mapped on ADC domain clock is enabled + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_IsEnabledDomain_ADC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_IsEnabledDomain_ADC(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN) == (RCC_PLLCFGR_PLLPEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable PLL output mapped on I2S domain clock + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_EnableDomain_I2S1 + * @note User shall check that PLL enable is not done through + * other functions (ex: ADC) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_I2S1(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN); +} + +#if defined(RCC_CCIPR2_I2S2SEL) +/** + * @brief Enable PLL output mapped on I2S2 domain clock + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_EnableDomain_I2S2 + * @note User shall check that PLL enable is not done through + * other functions (ex: ADC) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_I2S2(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN); +} +#endif /* RCC_CCIPR2_I2S2SEL */ + +/** + * @brief Disable PLL output mapped on I2S1 domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: RNG) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_DisableDomain_I2S1 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_I2S1(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN); +} + +/** + * @brief Check if PLL output mapped on I2S1 domain clock is enabled + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_IsEnabledDomain_I2S1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_IsEnabledDomain_I2S1(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN) == (RCC_PLLCFGR_PLLPEN)) ? 1UL : 0UL); +} + +#if defined(RCC_CCIPR2_I2S2SEL) +/** + * @brief Disable PLL output mapped on I2S2 domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: RNG) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_DisableDomain_I2S2 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_I2S2(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN); +} + +/** + * @brief Check if PLL output mapped on I2S2 domain clock is enabled + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_IsEnabledDomain_I2S2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_IsEnabledDomain_I2S2(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN) == (RCC_PLLCFGR_PLLPEN)) ? 1UL : 0UL); +} +#endif /* RCC_CCIPR2_I2S2SEL */ + +#if defined(RNG) +/** + * @brief Enable PLL output mapped on RNG domain clock + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_EnableDomain_RNG + * @note User shall check that PLL enable is not done through + * other functions (ex: TIM1, TIM15) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_RNG(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Disable PLL output mapped on RNG domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: TIM, TIM15) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_DisableDomain_RNG + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_RNG(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Check if PLL output mapped on RNG domain clock is enabled + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_IsEnabledDomain_RNG + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_IsEnabledDomain_RNG(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN) == (RCC_PLLCFGR_PLLQEN)) ? 1UL : 0UL); +} +#endif /* RNG */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** + * @brief Enable PLL output mapped on FDCAN domain clock + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_EnableDomain_FDCAN + * @note User shall check that PLL enable is not done through + * other functions (ex: TIM1, TIM15) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_FDCAN(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Disable PLL output mapped on FDCAN domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: TIM, TIM15) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_DisableDomain_FDCAN + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_FDCAN(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Check if PLL output mapped on FDCAN domain clock is enabled + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_IsEnabledDomain_FDCAN + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_IsEnabledDomain_FDCAN(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN) == (RCC_PLLCFGR_PLLQEN)) ? 1UL : 0UL); +} +#endif /* FDCAN1 || FDCAN2 */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Enable PLL output mapped on USB domain clock + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_EnableDomain_USB + * @note User shall check that PLL enable is not done through + * other functions (ex: TIM1, TIM15) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_USB(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Disable PLL output mapped on USB domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: TIM, TIM15) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_DisableDomain_USB + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_USB(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Check if PLL output mapped on USB domain clock is enabled + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_IsEnabledDomain_USB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_IsEnabledDomain_USB(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN) == (RCC_PLLCFGR_PLLQEN)) ? 1UL : 0UL); +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(RCC_PLLQ_SUPPORT) +/** + * @brief Enable PLL output mapped on TIM1 domain clock + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_EnableDomain_TIM1 + * @note User shall check that PLL enable is not done through + * other functions (ex: RNG, TIM15) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_TIM1(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Disable PLL output mapped on TIM1 domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: RNG, TIM15) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_DisableDomain_TIM1 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_TIM1(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Check if PLL output mapped on TIM1 domain clock is enabled + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_IsEnabledDomain_TIM1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_IsEnabledDomain_TIM1(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN) == (RCC_PLLCFGR_PLLQEN)) ? 1UL : 0UL); +} +#endif /* RCC_PLLQ_SUPPORT */ + +#if defined(RCC_PLLQ_SUPPORT) && defined(TIM15) +/** + * @brief Enable PLL output mapped on TIM15 domain clock + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_EnableDomain_TIM15 + * @note User shall check that PLL enable is not done through + * other functions (ex: RNG, TIM1) + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_TIM15(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Disable PLL output mapped on TIM15 domain clock + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note User shall check that PLL is not used by any other peripheral + * (ex: RNG, TIM1) + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_DisableDomain_TIM15 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_TIM15(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Check if PLL output mapped on TIM15 domain clock is enabled + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_IsEnabledDomain_TIM15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_IsEnabledDomain_TIM15(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN) == (RCC_PLLCFGR_PLLQEN)) ? 1UL : 0UL); +} +#endif /* RCC_PLLQ_SUPPORT && TIM15 */ + +/** + * @brief Enable PLL output mapped on SYSCLK domain + * @rmtoll PLLCFGR PLLREN LL_RCC_PLL_EnableDomain_SYS + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_SYS(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLREN); +} + +/** + * @brief Disable PLL output mapped on SYSCLK domain + * @note Cannot be disabled if the PLL clock is used as the system clock + * @note In order to save power, when the PLLCLK of the PLL is + * not used, Main PLL should be 0 + * @rmtoll PLLCFGR PLLREN LL_RCC_PLL_DisableDomain_SYS + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_SYS(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLREN); +} + +/** + * @brief Check if PLL output mapped on SYSCLK domain clock is enabled + * @rmtoll PLLCFGR PLLREN LL_RCC_PLL_IsEnabledDomain_SYS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_IsEnabledDomain_SYS(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLREN) == (RCC_PLLCFGR_PLLREN)) ? 1UL : 0UL); +} + +/** + * @} + */ + + + +/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Clear LSI ready interrupt flag + * @rmtoll CICR LSIRDYC LL_RCC_ClearFlag_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSIRDYC); +} + +/** + * @brief Clear LSE ready interrupt flag + * @rmtoll CICR LSERDYC LL_RCC_ClearFlag_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSERDYC); +} + +/** + * @brief Clear HSI ready interrupt flag + * @rmtoll CICR HSIRDYC LL_RCC_ClearFlag_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSIRDYC); +} + +/** + * @brief Clear HSE ready interrupt flag + * @rmtoll CICR HSERDYC LL_RCC_ClearFlag_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSERDYC); +} + +/** + * @brief Clear PLL ready interrupt flag + * @rmtoll CICR PLLRDYC LL_RCC_ClearFlag_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLLRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_PLLRDYC); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Clear HSI48 ready interrupt flag + * @rmtoll CICR HSI48RDYC LL_RCC_ClearFlag_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSI48RDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSI48RDYC); +} +#endif /* RCC_HSI48_SUPPORT */ +/** + * @brief Clear Clock security system interrupt flag + * @rmtoll CICR CSSC LL_RCC_ClearFlag_HSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_CSSC); +} + +/** + * @brief Clear LSE Clock security system interrupt flag + * @rmtoll CICR LSECSSC LL_RCC_ClearFlag_LSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSECSS(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSECSSC); +} + +/** + * @brief Check if LSI ready interrupt occurred or not + * @rmtoll CIFR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSIRDYF) == (RCC_CIFR_LSIRDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if LSE ready interrupt occurred or not + * @rmtoll CIFR LSERDYF LL_RCC_IsActiveFlag_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSERDYF) == (RCC_CIFR_LSERDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if HSI ready interrupt occurred or not + * @rmtoll CIFR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSIRDYF) == (RCC_CIFR_HSIRDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if HSE ready interrupt occurred or not + * @rmtoll CIFR HSERDYF LL_RCC_IsActiveFlag_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSERDYF) == (RCC_CIFR_HSERDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL ready interrupt occurred or not + * @rmtoll CIFR PLLRDYF LL_RCC_IsActiveFlag_PLLRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_PLLRDYF) == (RCC_CIFR_PLLRDYF)) ? 1UL : 0UL); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Check if HSI48 ready interrupt occurred or not + * @rmtoll CIR HSI48RDYF LL_RCC_IsActiveFlag_HSI48RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSI48RDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSI48RDYF) == (RCC_CIFR_HSI48RDYF)) ? 1UL : 0UL); +} +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @brief Check if Clock security system interrupt occurred or not + * @rmtoll CIFR CSSF LL_RCC_IsActiveFlag_HSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_CSSF) == (RCC_CIFR_CSSF)) ? 1UL : 0UL); +} + +/** + * @brief Check if LSE Clock security system interrupt occurred or not + * @rmtoll CIFR LSECSSF LL_RCC_IsActiveFlag_LSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSECSS(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSECSSF) == (RCC_CIFR_LSECSSF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Independent Watchdog reset is set or not. + * @rmtoll CSR IWDGRSTF LL_RCC_IsActiveFlag_IWDGRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDGRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_IWDGRSTF) == (RCC_CSR_IWDGRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Low Power reset is set or not. + * @rmtoll CSR LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_LPWRRSTF) == (RCC_CSR_LPWRRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Option byte reset is set or not. + * @rmtoll CSR OBLRSTF LL_RCC_IsActiveFlag_OBLRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_OBLRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_OBLRSTF) == (RCC_CSR_OBLRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Pin reset is set or not. + * @rmtoll CSR PINRSTF LL_RCC_IsActiveFlag_PINRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_PINRSTF) == (RCC_CSR_PINRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Software reset is set or not. + * @rmtoll CSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_SFTRSTF) == (RCC_CSR_SFTRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Window Watchdog reset is set or not. + * @rmtoll CSR WWDGRSTF LL_RCC_IsActiveFlag_WWDGRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDGRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_WWDGRSTF) == (RCC_CSR_WWDGRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag BOR or POR/PDR reset is set or not. + * @rmtoll CSR PWRRSTF LL_RCC_IsActiveFlag_PWRRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PWRRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_PWRRSTF) == (RCC_CSR_PWRRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Set RMVF bit to clear the reset flags. + * @rmtoll CSR RMVF LL_RCC_ClearResetFlags + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearResetFlags(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_RMVF); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_IT_Management IT Management + * @{ + */ + +/** + * @brief Enable LSI ready interrupt + * @rmtoll CIER LSIRDYIE LL_RCC_EnableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSIRDYIE); +} + +/** + * @brief Enable LSE ready interrupt + * @rmtoll CIER LSERDYIE LL_RCC_EnableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSERDYIE); +} + +/** + * @brief Enable HSI ready interrupt + * @rmtoll CIER HSIRDYIE LL_RCC_EnableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSIRDYIE); +} + +/** + * @brief Enable HSE ready interrupt + * @rmtoll CIER HSERDYIE LL_RCC_EnableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSERDYIE); +} + +/** + * @brief Enable PLL ready interrupt + * @rmtoll CIER PLLRDYIE LL_RCC_EnableIT_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLLRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_PLLRDYIE); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Enable HSI48 ready interrupt + * @rmtoll CIER HSI48RDYIE LL_RCC_EnableIT_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSI48RDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE); +} +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @brief Disable LSI ready interrupt + * @rmtoll CIER LSIRDYIE LL_RCC_DisableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSIRDYIE); +} + +/** + * @brief Disable LSE ready interrupt + * @rmtoll CIER LSERDYIE LL_RCC_DisableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSERDYIE); +} + +/** + * @brief Disable HSI ready interrupt + * @rmtoll CIER HSIRDYIE LL_RCC_DisableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSIRDYIE); +} + +/** + * @brief Disable HSE ready interrupt + * @rmtoll CIER HSERDYIE LL_RCC_DisableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSERDYIE); +} + +/** + * @brief Disable PLL ready interrupt + * @rmtoll CIER PLLRDYIE LL_RCC_DisableIT_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLLRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_PLLRDYIE); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Disable HSI48 ready interrupt + * @rmtoll CIER HSI48RDYIE LL_RCC_DisableIT_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSI48RDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE); +} +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @brief Checks if LSI ready interrupt source is enabled or disabled. + * @rmtoll CIER LSIRDYIE LL_RCC_IsEnabledIT_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSIRDYIE) == (RCC_CIER_LSIRDYIE)) ? 1UL : 0UL); +} + +/** + * @brief Checks if LSE ready interrupt source is enabled or disabled. + * @rmtoll CIER LSERDYIE LL_RCC_IsEnabledIT_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSERDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSERDYIE) == (RCC_CIER_LSERDYIE)) ? 1UL : 0UL); +} + +/** + * @brief Checks if HSI ready interrupt source is enabled or disabled. + * @rmtoll CIER HSIRDYIE LL_RCC_IsEnabledIT_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSIRDYIE) == (RCC_CIER_HSIRDYIE)) ? 1UL : 0UL); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Checks if HSI48 ready interrupt source is enabled or disabled. + * @rmtoll CIER HSI48RDYIE LL_RCC_IsEnabledIT_HSI48RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSI48RDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE) == (RCC_CIER_HSI48RDYIE)) ? 1UL : 0UL); +} +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @brief Checks if HSE ready interrupt source is enabled or disabled. + * @rmtoll CIER HSERDYIE LL_RCC_IsEnabledIT_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSERDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSERDYIE) == (RCC_CIER_HSERDYIE)) ? 1UL : 0UL); +} + +/** + * @brief Checks if PLL ready interrupt source is enabled or disabled. + * @rmtoll CIER PLLRDYIE LL_RCC_IsEnabledIT_PLLRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_PLLRDYIE) == (RCC_CIER_PLLRDYIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EF_Init De-initialization function + * @{ + */ +ErrorStatus LL_RCC_DeInit(void); +/** + * @} + */ + +/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions + * @{ + */ +void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks); +uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource); +uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource); +#if defined(LPUART1) || defined(LPUART2) +uint32_t LL_RCC_GetLPUARTClockFreq(uint32_t LPUARTxSource); +#endif /* LPUART1 */ +#if defined(LPTIM1) && defined(LPTIM2) +uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource); +#endif /* LPTIM1 && LPTIM2 */ +#if defined(RNG) +uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource); +#endif /* RNG */ +uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource); +uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource); +#if defined(CEC) +uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource); +#endif /* CEC */ +#if defined(FDCAN1) || defined(FDCAN2) +uint32_t LL_RCC_GetFDCANClockFreq(uint32_t FDCANxSource); +#endif /* FDCAN1 */ +uint32_t LL_RCC_GetTIMClockFreq(uint32_t TIMxSource); +uint32_t LL_RCC_GetRTCClockFreq(void); +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource); +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* RCC */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_RCC_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rtc.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rtc.h new file mode 100644 index 0000000..affc938 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rtc.h @@ -0,0 +1,4215 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_rtc.h + * @author MCD Application Team + * @brief Header file of RTC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_RTC_H +#define STM32G0xx_LL_RTC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined(RTC) + +/** @defgroup RTC_LL RTC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RTC_LL_Private_Constants RTC Private Constants + * @{ + */ +/* Masks Definition */ +#define RTC_LL_INIT_MASK 0xFFFFFFFFU +#define RTC_LL_RSF_MASK 0xFFFFFF5FU + +/* Write protection defines */ +#define RTC_WRITE_PROTECTION_DISABLE ((uint8_t)0xFFU) +#define RTC_WRITE_PROTECTION_ENABLE_1 ((uint8_t)0xCAU) +#define RTC_WRITE_PROTECTION_ENABLE_2 ((uint8_t)0x53U) + +/* Defines used to combine date & time */ +#define RTC_OFFSET_WEEKDAY (uint32_t)24U +#define RTC_OFFSET_DAY (uint32_t)16U +#define RTC_OFFSET_MONTH (uint32_t)8U +#define RTC_OFFSET_HOUR (uint32_t)16U +#define RTC_OFFSET_MINUTE (uint32_t)8U + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_Private_Macros RTC Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_ES_INIT RTC Exported Init structure + * @{ + */ + +/** + * @brief RTC Init structures definition + */ +typedef struct +{ + uint32_t HourFormat; /*!< Specifies the RTC Hours Format. + This parameter can be a value of @ref RTC_LL_EC_HOURFORMAT + + This feature can be modified afterwards using unitary function + @ref LL_RTC_SetHourFormat(). */ + + uint32_t AsynchPrescaler; /*!< Specifies the RTC Asynchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F + + This feature can be modified afterwards using unitary function + @ref LL_RTC_SetAsynchPrescaler(). */ + + uint32_t SynchPrescaler; /*!< Specifies the RTC Synchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF + + This feature can be modified afterwards using unitary function + @ref LL_RTC_SetSynchPrescaler(). */ +} LL_RTC_InitTypeDef; + +/** + * @brief RTC Time structure definition + */ +typedef struct +{ + uint32_t TimeFormat; /*!< Specifies the RTC AM/PM Time. + This parameter can be a value of @ref RTC_LL_EC_TIME_FORMAT + + This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetFormat(). */ + + uint8_t Hours; /*!< Specifies the RTC Time Hours. + This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the @ref LL_RTC_TIME_FORMAT_PM is selected. + This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the @ref LL_RTC_TIME_FORMAT_AM_OR_24 is selected. + + This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetHour(). */ + + uint8_t Minutes; /*!< Specifies the RTC Time Minutes. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 + + This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetMinute(). */ + + uint8_t Seconds; /*!< Specifies the RTC Time Seconds. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 + + This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetSecond(). */ +} LL_RTC_TimeTypeDef; + +/** + * @brief RTC Date structure definition + */ +typedef struct +{ + uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay. + This parameter can be a value of @ref RTC_LL_EC_WEEKDAY + + This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetWeekDay(). */ + + uint8_t Month; /*!< Specifies the RTC Date Month. + This parameter can be a value of @ref RTC_LL_EC_MONTH + + This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetMonth(). */ + + uint8_t Day; /*!< Specifies the RTC Date Day. + This parameter must be a number between Min_Data = 1 and Max_Data = 31 + + This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetDay(). */ + + uint8_t Year; /*!< Specifies the RTC Date Year. + This parameter must be a number between Min_Data = 0 and Max_Data = 99 + + This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetYear(). */ +} LL_RTC_DateTypeDef; + +/** + * @brief RTC Alarm structure definition + */ +typedef struct +{ + LL_RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members. */ + + uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks. + This parameter can be a value of @ref RTC_LL_EC_ALMA_MASK for ALARM A or @ref RTC_LL_EC_ALMB_MASK for ALARM B. + + This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_SetMask() for ALARM A + or @ref LL_RTC_ALMB_SetMask() for ALARM B + */ + + uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on day or WeekDay. + This parameter can be a value of @ref RTC_LL_EC_ALMA_WEEKDAY_SELECTION for ALARM A or @ref RTC_LL_EC_ALMB_WEEKDAY_SELECTION for ALARM B + + This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_EnableWeekday() or @ref LL_RTC_ALMA_DisableWeekday() + for ALARM A or @ref LL_RTC_ALMB_EnableWeekday() or @ref LL_RTC_ALMB_DisableWeekday() for ALARM B + */ + + uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Day/WeekDay. + If AlarmDateWeekDaySel set to day, this parameter must be a number between Min_Data = 1 and Max_Data = 31. + + This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_SetDay() + for ALARM A or @ref LL_RTC_ALMB_SetDay() for ALARM B. + + If AlarmDateWeekDaySel set to Weekday, this parameter can be a value of @ref RTC_LL_EC_WEEKDAY. + + This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_SetWeekDay() + for ALARM A or @ref LL_RTC_ALMB_SetWeekDay() for ALARM B. + */ +} LL_RTC_AlarmTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RTC_LL_Exported_Constants RTC Exported Constants + * @{ + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_EC_FORMAT FORMAT + * @{ + */ +#define LL_RTC_FORMAT_BIN 0x00000000U /*!< Binary data format */ +#define LL_RTC_FORMAT_BCD 0x00000001U /*!< BCD data format */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMA_WEEKDAY_SELECTION RTC Alarm A Date WeekDay + * @{ + */ +#define LL_RTC_ALMA_DATEWEEKDAYSEL_DATE 0x00000000U /*!< Alarm A Date is selected */ +#define LL_RTC_ALMA_DATEWEEKDAYSEL_WEEKDAY RTC_ALRMAR_WDSEL /*!< Alarm A WeekDay is selected */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMB_WEEKDAY_SELECTION RTC Alarm B Date WeekDay + * @{ + */ +#define LL_RTC_ALMB_DATEWEEKDAYSEL_DATE 0x00000000U /*!< Alarm B Date is selected */ +#define LL_RTC_ALMB_DATEWEEKDAYSEL_WEEKDAY RTC_ALRMBR_WDSEL /*!< Alarm B WeekDay is selected */ +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup RTC_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_RTC_ReadReg function + * @{ + */ +#define LL_RTC_SCR_ITSF RTC_SCR_CITSF +#define LL_RTC_SCR_TSOVF RTC_SCR_CTSOVF +#define LL_RTC_SCR_TSF RTC_SCR_CTSF +#define LL_RTC_SCR_WUTF RTC_SCR_CWUTF +#define LL_RTC_SCR_ALRBF RTC_SCR_CALRBF +#define LL_RTC_SCR_ALRAF RTC_SCR_CALRAF + +#define LL_RTC_ICSR_RECALPF RTC_ICSR_RECALPF +#define LL_RTC_ICSR_INITF RTC_ICSR_INITF +#define LL_RTC_ICSR_RSF RTC_ICSR_RSF +#define LL_RTC_ICSR_INITS RTC_ICSR_INITS +#define LL_RTC_ICSR_SHPF RTC_ICSR_SHPF +#define LL_RTC_ICSR_WUTWF RTC_ICSR_WUTWF +#define LL_RTC_ICSR_ALRBWF RTC_ICSR_ALRBWF +#define LL_RTC_ICSR_ALRAWF RTC_ICSR_ALRAWF +/** + * @} + */ + +/** @defgroup RTC_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_RTC_ReadReg and LL_RTC_WriteReg functions + * @{ + */ +#define LL_RTC_CR_TSIE RTC_CR_TSIE +#define LL_RTC_CR_WUTIE RTC_CR_WUTIE +#define LL_RTC_CR_ALRBIE RTC_CR_ALRBIE +#define LL_RTC_CR_ALRAIE RTC_CR_ALRAIE +/** + * @} + */ + +/** @defgroup RTC_LL_EC_WEEKDAY WEEK DAY + * @{ + */ +#define LL_RTC_WEEKDAY_MONDAY ((uint8_t)0x01U) /*!< Monday */ +#define LL_RTC_WEEKDAY_TUESDAY ((uint8_t)0x02U) /*!< Tuesday */ +#define LL_RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03U) /*!< Wednesday */ +#define LL_RTC_WEEKDAY_THURSDAY ((uint8_t)0x04U) /*!< Thursday */ +#define LL_RTC_WEEKDAY_FRIDAY ((uint8_t)0x05U) /*!< Friday */ +#define LL_RTC_WEEKDAY_SATURDAY ((uint8_t)0x06U) /*!< Saturday */ +#define LL_RTC_WEEKDAY_SUNDAY ((uint8_t)0x07U) /*!< Sunday */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_MONTH MONTH + * @{ + */ +#define LL_RTC_MONTH_JANUARY ((uint8_t)0x01U) /*!< January */ +#define LL_RTC_MONTH_FEBRUARY ((uint8_t)0x02U) /*!< February */ +#define LL_RTC_MONTH_MARCH ((uint8_t)0x03U) /*!< March */ +#define LL_RTC_MONTH_APRIL ((uint8_t)0x04U) /*!< April */ +#define LL_RTC_MONTH_MAY ((uint8_t)0x05U) /*!< May */ +#define LL_RTC_MONTH_JUNE ((uint8_t)0x06U) /*!< June */ +#define LL_RTC_MONTH_JULY ((uint8_t)0x07U) /*!< July */ +#define LL_RTC_MONTH_AUGUST ((uint8_t)0x08U) /*!< August */ +#define LL_RTC_MONTH_SEPTEMBER ((uint8_t)0x09U) /*!< September */ +#define LL_RTC_MONTH_OCTOBER ((uint8_t)0x10U) /*!< October */ +#define LL_RTC_MONTH_NOVEMBER ((uint8_t)0x11U) /*!< November */ +#define LL_RTC_MONTH_DECEMBER ((uint8_t)0x12U) /*!< December */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_HOURFORMAT HOUR FORMAT + * @{ + */ +#define LL_RTC_HOURFORMAT_24HOUR 0x00000000U /*!< 24 hour/day format */ +#define LL_RTC_HOURFORMAT_AMPM RTC_CR_FMT /*!< AM/PM hour format */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALARMOUT ALARM OUTPUT + * @{ + */ +#define LL_RTC_ALARMOUT_DISABLE 0x00000000U /*!< Output disabled */ +#define LL_RTC_ALARMOUT_ALMA RTC_CR_OSEL_0 /*!< Alarm A output enabled */ +#define LL_RTC_ALARMOUT_ALMB RTC_CR_OSEL_1 /*!< Alarm B output enabled */ +#define LL_RTC_ALARMOUT_WAKEUP RTC_CR_OSEL /*!< Wakeup output enabled */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALARM_OUTPUTTYPE ALARM OUTPUT TYPE + * @{ + */ +#define LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN RTC_CR_TAMPALRM_TYPE /*!< RTC_ALARM is open-drain output */ +#define LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL 0x00000000U /*!< RTC_ALARM is push-pull output */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_OUTPUTPOLARITY_PIN OUTPUT POLARITY PIN + * @{ + */ +#define LL_RTC_OUTPUTPOLARITY_PIN_HIGH 0x00000000U /*!< Pin is high when ALRAF/ALRBF/WUTF is asserted (depending on OSEL)*/ +#define LL_RTC_OUTPUTPOLARITY_PIN_LOW RTC_CR_POL /*!< Pin is low when ALRAF/ALRBF/WUTF is asserted (depending on OSEL) */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TIME_FORMAT TIME FORMAT + * @{ + */ +#define LL_RTC_TIME_FORMAT_AM_OR_24 0x00000000U /*!< AM or 24-hour format */ +#define LL_RTC_TIME_FORMAT_PM RTC_TR_PM /*!< PM */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_SHIFT_SECOND SHIFT SECOND + * @{ + */ +#define LL_RTC_SHIFT_SECOND_DELAY 0x00000000U /* Delay (seconds) = SUBFS / (PREDIV_S + 1) */ +#define LL_RTC_SHIFT_SECOND_ADVANCE RTC_SHIFTR_ADD1S /* Advance (seconds) = (1 - (SUBFS / (PREDIV_S + 1))) */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMA_MASK ALARMA MASK + * @{ + */ +#define LL_RTC_ALMA_MASK_NONE 0x00000000U /*!< No masks applied on Alarm A*/ +#define LL_RTC_ALMA_MASK_DATEWEEKDAY RTC_ALRMAR_MSK4 /*!< Date/day do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_HOURS RTC_ALRMAR_MSK3 /*!< Hours do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_MINUTES RTC_ALRMAR_MSK2 /*!< Minutes do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_SECONDS RTC_ALRMAR_MSK1 /*!< Seconds do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_ALL (RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1) /*!< Masks all */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMA_TIME_FORMAT ALARMA TIME FORMAT + * @{ + */ +#define LL_RTC_ALMA_TIME_FORMAT_AM 0x00000000U /*!< AM or 24-hour format */ +#define LL_RTC_ALMA_TIME_FORMAT_PM RTC_ALRMAR_PM /*!< PM */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMB_MASK ALARMB MASK + * @{ + */ +#define LL_RTC_ALMB_MASK_NONE 0x00000000U /*!< No masks applied on Alarm B*/ +#define LL_RTC_ALMB_MASK_DATEWEEKDAY RTC_ALRMBR_MSK4 /*!< Date/day do not care in Alarm B comparison */ +#define LL_RTC_ALMB_MASK_HOURS RTC_ALRMBR_MSK3 /*!< Hours do not care in Alarm B comparison */ +#define LL_RTC_ALMB_MASK_MINUTES RTC_ALRMBR_MSK2 /*!< Minutes do not care in Alarm B comparison */ +#define LL_RTC_ALMB_MASK_SECONDS RTC_ALRMBR_MSK1 /*!< Seconds do not care in Alarm B comparison */ +#define LL_RTC_ALMB_MASK_ALL (RTC_ALRMBR_MSK4 | RTC_ALRMBR_MSK3 | RTC_ALRMBR_MSK2 | RTC_ALRMBR_MSK1) /*!< Masks all */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMB_TIME_FORMAT ALARMB TIME FORMAT + * @{ + */ +#define LL_RTC_ALMB_TIME_FORMAT_AM 0x00000000U /*!< AM or 24-hour format */ +#define LL_RTC_ALMB_TIME_FORMAT_PM RTC_ALRMBR_PM /*!< PM */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TIMESTAMP_EDGE TIMESTAMP EDGE + * @{ + */ +#define LL_RTC_TIMESTAMP_EDGE_RISING 0x00000000U /*!< RTC_TS input rising edge generates a time-stamp event */ +#define LL_RTC_TIMESTAMP_EDGE_FALLING RTC_CR_TSEDGE /*!< RTC_TS input falling edge generates a time-stamp even */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TS_TIME_FORMAT TIMESTAMP TIME FORMAT + * @{ + */ +#define LL_RTC_TS_TIME_FORMAT_AM 0x00000000U /*!< AM or 24-hour format */ +#define LL_RTC_TS_TIME_FORMAT_PM RTC_TSTR_PM /*!< PM */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER TAMPER + * @{ + */ +#define LL_RTC_TAMPER_1 TAMP_CR1_TAMP1E /*!< Tamper 1 input detection */ +#define LL_RTC_TAMPER_2 TAMP_CR1_TAMP2E /*!< Tamper 2 input detection */ +#if defined (TAMP_CR1_TAMP3E) +#define LL_RTC_TAMPER_3 TAMP_CR1_TAMP3E /*!< Tamper 3 input detection */ +#endif /* TAMP_CR1_TAMP3E */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_MASK TAMPER MASK + * @{ + */ +#define LL_RTC_TAMPER_MASK_TAMPER1 TAMP_CR2_TAMP1MSK /*!< Tamper 1 event generates a trigger event. TAMP1F is masked and internally cleared by hardware.The backup registers are not erased */ +#define LL_RTC_TAMPER_MASK_TAMPER2 TAMP_CR2_TAMP2MSK /*!< Tamper 2 event generates a trigger event. TAMP2F is masked and internally cleared by hardware. The backup registers are not erased. */ +#if defined (TAMP_CR1_TAMP3E) +#define LL_RTC_TAMPER_MASK_TAMPER3 TAMP_CR2_TAMP3MSK /*!< Tamper 3 event generates a trigger event. TAMP3F is masked and internally cleared by hardware. The backup registers are not erased. */ +#endif /* TAMP_CR1_TAMP3E */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_NOERASE TAMPER NO ERASE + * @{ + */ +#define LL_RTC_TAMPER_NOERASE_TAMPER1 TAMP_CR2_TAMP1NOERASE /*!< Tamper 1 event does not erase the backup registers. */ +#define LL_RTC_TAMPER_NOERASE_TAMPER2 TAMP_CR2_TAMP2NOERASE /*!< Tamper 2 event does not erase the backup registers. */ +#if defined (TAMP_CR1_TAMP3E) +#define LL_RTC_TAMPER_NOERASE_TAMPER3 TAMP_CR2_TAMP3NOERASE /*!< Tamper 3 event does not erase the backup registers. */ +#endif /* TAMP_CR1_TAMP3E */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_DURATION TAMPER DURATION + * @{ + */ +#define LL_RTC_TAMPER_DURATION_1RTCCLK 0x00000000U /*!< Tamper pins are pre-charged before sampling during 1 RTCCLK cycle */ +#define LL_RTC_TAMPER_DURATION_2RTCCLK TAMP_FLTCR_TAMPPRCH_0 /*!< Tamper pins are pre-charged before sampling during 2 RTCCLK cycles */ +#define LL_RTC_TAMPER_DURATION_4RTCCLK TAMP_FLTCR_TAMPPRCH_1 /*!< Tamper pins are pre-charged before sampling during 4 RTCCLK cycles */ +#define LL_RTC_TAMPER_DURATION_8RTCCLK TAMP_FLTCR_TAMPPRCH /*!< Tamper pins are pre-charged before sampling during 8 RTCCLK cycles */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_FILTER TAMPER FILTER + * @{ + */ +#define LL_RTC_TAMPER_FILTER_DISABLE 0x00000000U /*!< Tamper filter is disabled */ +#define LL_RTC_TAMPER_FILTER_2SAMPLE TAMP_FLTCR_TAMPFLT_0 /*!< Tamper is activated after 2 consecutive samples at the active level */ +#define LL_RTC_TAMPER_FILTER_4SAMPLE TAMP_FLTCR_TAMPFLT_1 /*!< Tamper is activated after 4 consecutive samples at the active level */ +#define LL_RTC_TAMPER_FILTER_8SAMPLE TAMP_FLTCR_TAMPFLT /*!< Tamper is activated after 8 consecutive samples at the active level. */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_SAMPLFREQDIV TAMPER SAMPLING FREQUENCY DIVIDER + * @{ + */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_32768 0x00000000U /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 32768 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_16384 TAMP_FLTCR_TAMPFREQ_0 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 16384 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_8192 TAMP_FLTCR_TAMPFREQ_1 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 8192 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_4096 (TAMP_FLTCR_TAMPFREQ_1 | TAMP_FLTCR_TAMPFREQ_0) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 4096 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_2048 TAMP_FLTCR_TAMPFREQ_2 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 2048 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_1024 (TAMP_FLTCR_TAMPFREQ_2 | TAMP_FLTCR_TAMPFREQ_0) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 1024 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_512 (TAMP_FLTCR_TAMPFREQ_2 | TAMP_FLTCR_TAMPFREQ_1) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 512 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_256 TAMP_FLTCR_TAMPFREQ /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 256 */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_ACTIVELEVEL TAMPER ACTIVE LEVEL + * @{ + */ +#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP1 TAMP_CR2_TAMP1TRG /*!< Tamper 1 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event */ +#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP2 TAMP_CR2_TAMP2TRG /*!< Tamper 2 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event */ +#if defined (TAMP_CR1_TAMP3E) +#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP3 TAMP_CR2_TAMP3TRG /*!< Tamper 3 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event */ +#endif /* TAMP_CR1_TAMP3E */ +/** + * @} + */ + + +/** @defgroup RTC_LL_EC_INTERNAL INTERNAL TAMPER + * @{ + */ +#define LL_RTC_TAMPER_ITAMP3 TAMP_CR1_ITAMP3E /*!< Internal tamper 3: LSE monitoring */ +#define LL_RTC_TAMPER_ITAMP4 TAMP_CR1_ITAMP4E /*!< Internal tamper 4: HSE monitoring */ +#define LL_RTC_TAMPER_ITAMP5 TAMP_CR1_ITAMP5E /*!< Internal tamper 5: RTC calendar overflow */ +#define LL_RTC_TAMPER_ITAMP6 TAMP_CR1_ITAMP6E /*!< Internal tamper 6: Test mode entry */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_BKP BACKUP + * @{ + */ +#define LL_RTC_BKP_DR0 0x00000000U +#define LL_RTC_BKP_DR1 0x00000001U +#define LL_RTC_BKP_DR2 0x00000002U +#define LL_RTC_BKP_DR3 0x00000003U +#define LL_RTC_BKP_DR4 0x00000004U +/** + * @} + */ + +/** @defgroup RTC_LL_EC_WAKEUPCLOCK_DIV WAKEUP CLOCK DIV + * @{ + */ +#define LL_RTC_WAKEUPCLOCK_DIV_16 0x00000000U /*!< RTC/16 clock is selected */ +#define LL_RTC_WAKEUPCLOCK_DIV_8 RTC_CR_WUCKSEL_0 /*!< RTC/8 clock is selected */ +#define LL_RTC_WAKEUPCLOCK_DIV_4 RTC_CR_WUCKSEL_1 /*!< RTC/4 clock is selected */ +#define LL_RTC_WAKEUPCLOCK_DIV_2 (RTC_CR_WUCKSEL_1 | RTC_CR_WUCKSEL_0) /*!< RTC/2 clock is selected */ +#define LL_RTC_WAKEUPCLOCK_CKSPRE RTC_CR_WUCKSEL_2 /*!< ck_spre (usually 1 Hz) clock is selected */ +#define LL_RTC_WAKEUPCLOCK_CKSPRE_WUT (RTC_CR_WUCKSEL_2 | RTC_CR_WUCKSEL_1) /*!< ck_spre (usually 1 Hz) clock is selected and 2exp16 is added to the WUT counter value*/ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_CALIB_OUTPUT Calibration output + * @{ + */ +#define LL_RTC_CALIB_OUTPUT_NONE 0x00000000U /*!< Calibration output disabled */ +#define LL_RTC_CALIB_OUTPUT_1HZ (RTC_CR_COE | RTC_CR_COSEL) /*!< Calibration output is 1 Hz */ +#define LL_RTC_CALIB_OUTPUT_512HZ RTC_CR_COE /*!< Calibration output is 512 Hz */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_CALIB_INSERTPULSE Calibration pulse insertion + * @{ + */ +#define LL_RTC_CALIB_INSERTPULSE_NONE 0x00000000U /*!< No RTCCLK pulses are added */ +#define LL_RTC_CALIB_INSERTPULSE_SET RTC_CALR_CALP /*!< One RTCCLK pulse is effectively inserted every 2exp11 pulses (frequency increased by 488.5 ppm) */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_CALIB_PERIOD Calibration period + * @{ + */ +#define LL_RTC_CALIB_PERIOD_32SEC 0x00000000U /*!< Use a 32-second calibration cycle period */ +#define LL_RTC_CALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< Use a 16-second calibration cycle period */ +#define LL_RTC_CALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< Use a 8-second calibration cycle period */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RTC_LL_Exported_Macros RTC Exported Macros + * @{ + */ + +/** @defgroup RTC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RTC register + * @param __INSTANCE__ RTC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RTC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in RTC register + * @param __INSTANCE__ RTC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RTC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup RTC_LL_EM_Convert Convert helper Macros + * @{ + */ + +/** + * @brief Helper macro to convert a value from 2 digit decimal format to BCD format + * @param __VALUE__ Byte to be converted + * @retval Converted byte + */ +#define __LL_RTC_CONVERT_BIN2BCD(__VALUE__) (uint8_t)((((__VALUE__) / 10U) << 4U) | ((__VALUE__) % 10U)) + +/** + * @brief Helper macro to convert a value from BCD format to 2 digit decimal format + * @param __VALUE__ BCD value to be converted + * @retval Converted byte + */ +#define __LL_RTC_CONVERT_BCD2BIN(__VALUE__) (uint8_t)((((uint8_t)((__VALUE__) & (uint8_t)0xF0U) >> (uint8_t)0x4U) * 10U ) + ((__VALUE__) & (uint8_t)0x0FU)) + +/** + * @} + */ + +/** @defgroup RTC_LL_EM_Date Date helper Macros + * @{ + */ + +/** + * @brief Helper macro to retrieve weekday. + * @param __RTC_DATE__ Date returned by @ref LL_RTC_DATE_Get function. + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +#define __LL_RTC_GET_WEEKDAY(__RTC_DATE__) (((__RTC_DATE__) >> RTC_OFFSET_WEEKDAY) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve Year in BCD format + * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get + * @retval Year in BCD format (0x00 . . . 0x99) + */ +#define __LL_RTC_GET_YEAR(__RTC_DATE__) ((__RTC_DATE__) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve Month in BCD format + * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + */ +#define __LL_RTC_GET_MONTH(__RTC_DATE__) (((__RTC_DATE__) >>RTC_OFFSET_MONTH) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve Day in BCD format + * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get + * @retval Day in BCD format (0x01 . . . 0x31) + */ +#define __LL_RTC_GET_DAY(__RTC_DATE__) (((__RTC_DATE__) >>RTC_OFFSET_DAY) & 0x000000FFU) + +/** + * @} + */ + +/** @defgroup RTC_LL_EM_Time Time helper Macros + * @{ + */ + +/** + * @brief Helper macro to retrieve hour in BCD format + * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function + * @retval Hours in BCD format (0x01. . .0x12 or between Min_Data=0x00 and Max_Data=0x23) + */ +#define __LL_RTC_GET_HOUR(__RTC_TIME__) (((__RTC_TIME__) >> RTC_OFFSET_HOUR) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve minute in BCD format + * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function + * @retval Minutes in BCD format (0x00. . .0x59) + */ +#define __LL_RTC_GET_MINUTE(__RTC_TIME__) (((__RTC_TIME__) >> RTC_OFFSET_MINUTE) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve second in BCD format + * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function + * @retval Seconds in format (0x00. . .0x59) + */ +#define __LL_RTC_GET_SECOND(__RTC_TIME__) ((__RTC_TIME__) & 0x000000FFU) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RTC_LL_Exported_Functions RTC Exported Functions + * @{ + */ + +/** @defgroup RTC_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Set Hours format (24 hour/day or AM/PM hour format) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll RTC_CR FMT LL_RTC_SetHourFormat + * @param RTCx RTC Instance + * @param HourFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_HOURFORMAT_24HOUR + * @arg @ref LL_RTC_HOURFORMAT_AMPM + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetHourFormat(RTC_TypeDef *RTCx, uint32_t HourFormat) +{ + MODIFY_REG(RTCx->CR, RTC_CR_FMT, HourFormat); +} + +/** + * @brief Get Hours format (24 hour/day or AM/PM hour format) + * @rmtoll RTC_CR FMT LL_RTC_GetHourFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_HOURFORMAT_24HOUR + * @arg @ref LL_RTC_HOURFORMAT_AMPM + */ +__STATIC_INLINE uint32_t LL_RTC_GetHourFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_FMT)); +} + +/** + * @brief Select the flag to be routed to RTC_ALARM output + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR OSEL LL_RTC_SetAlarmOutEvent + * @param RTCx RTC Instance + * @param AlarmOutput This parameter can be one of the following values: + * @arg @ref LL_RTC_ALARMOUT_DISABLE + * @arg @ref LL_RTC_ALARMOUT_ALMA + * @arg @ref LL_RTC_ALARMOUT_ALMB + * @arg @ref LL_RTC_ALARMOUT_WAKEUP + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetAlarmOutEvent(RTC_TypeDef *RTCx, uint32_t AlarmOutput) +{ + MODIFY_REG(RTCx->CR, RTC_CR_OSEL, AlarmOutput); +} + +/** + * @brief Get the flag to be routed to RTC_ALARM output + * @rmtoll RTC_CR OSEL LL_RTC_GetAlarmOutEvent + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALARMOUT_DISABLE + * @arg @ref LL_RTC_ALARMOUT_ALMA + * @arg @ref LL_RTC_ALARMOUT_ALMB + * @arg @ref LL_RTC_ALARMOUT_WAKEUP + */ +__STATIC_INLINE uint32_t LL_RTC_GetAlarmOutEvent(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_OSEL)); +} + +/** + * @brief Set RTC_ALARM output type (ALARM in push-pull or open-drain output) + * @rmtoll RTC_CR TAMPALRM_TYPE LL_RTC_SetAlarmOutputType + * @param RTCx RTC Instance + * @param Output This parameter can be one of the following values: + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetAlarmOutputType(RTC_TypeDef *RTCx, uint32_t Output) +{ + MODIFY_REG(RTCx->CR, RTC_CR_TAMPALRM_TYPE, Output); +} + +/** + * @brief Get RTC_ALARM output type (ALARM in push-pull or open-drain output) + * @rmtoll RTC_CR TAMPALRM_TYPE LL_RTC_SetAlarmOutputType + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL + */ +__STATIC_INLINE uint32_t LL_RTC_GetAlarmOutputType(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_TAMPALRM_TYPE)); +} + +/** + * @brief Enable initialization mode + * @note Initialization mode is used to program time and date register (RTC_TR and RTC_DR) + * and prescaler register (RTC_PRER). + * Counters are stopped and start counting from the new value when INIT is reset. + * @rmtoll RTC_ICSR INIT LL_RTC_EnableInitMode + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableInitMode(RTC_TypeDef *RTCx) +{ + /* Set the Initialization mode */ + WRITE_REG(RTCx->ICSR, RTC_LL_INIT_MASK); +} + +/** + * @brief Disable initialization mode (Free running mode) + * @rmtoll RTC_ICSR INIT LL_RTC_DisableInitMode + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableInitMode(RTC_TypeDef *RTCx) +{ + /* Exit Initialization mode */ + WRITE_REG(RTCx->ICSR, (uint32_t)~RTC_ICSR_INIT); +} + +/** + * @brief Set Output polarity (pin is low when ALRAF/ALRBF/WUTF is asserted) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR POL LL_RTC_SetOutputPolarity + * @param RTCx RTC Instance + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_HIGH + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_LOW + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetOutputPolarity(RTC_TypeDef *RTCx, uint32_t Polarity) +{ + MODIFY_REG(RTCx->CR, RTC_CR_POL, Polarity); +} + +/** + * @brief Get Output polarity + * @rmtoll RTC_CR POL LL_RTC_GetOutputPolarity + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_HIGH + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_LOW + */ +__STATIC_INLINE uint32_t LL_RTC_GetOutputPolarity(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_POL)); +} + +/** + * @brief Enable Bypass the shadow registers + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR BYPSHAD LL_RTC_EnableShadowRegBypass + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableShadowRegBypass(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_BYPSHAD); +} + +/** + * @brief Disable Bypass the shadow registers + * @rmtoll RTC_CR BYPSHAD LL_RTC_DisableShadowRegBypass + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableShadowRegBypass(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_BYPSHAD); +} + +/** + * @brief Check if Shadow registers bypass is enabled or not. + * @rmtoll RTC_CR BYPSHAD LL_RTC_IsShadowRegBypassEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsShadowRegBypassEnabled(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_BYPSHAD) == (RTC_CR_BYPSHAD)) ? 1UL : 0UL); +} + +/** + * @brief Enable RTC_REFIN reference clock detection (50 or 60 Hz) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll RTC_CR REFCKON LL_RTC_EnableRefClock + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableRefClock(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_REFCKON); +} + +/** + * @brief Disable RTC_REFIN reference clock detection (50 or 60 Hz) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll RTC_CR REFCKON LL_RTC_DisableRefClock + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableRefClock(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_REFCKON); +} + +/** + * @brief Set Asynchronous prescaler factor + * @rmtoll RTC_PRER PREDIV_A LL_RTC_SetAsynchPrescaler + * @param RTCx RTC Instance + * @param AsynchPrescaler Value between Min_Data = 0 and Max_Data = 0x7F + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetAsynchPrescaler(RTC_TypeDef *RTCx, uint32_t AsynchPrescaler) +{ + MODIFY_REG(RTCx->PRER, RTC_PRER_PREDIV_A, AsynchPrescaler << RTC_PRER_PREDIV_A_Pos); +} + +/** + * @brief Set Synchronous prescaler factor + * @rmtoll RTC_PRER PREDIV_S LL_RTC_SetSynchPrescaler + * @param RTCx RTC Instance + * @param SynchPrescaler Value between Min_Data = 0 and Max_Data = 0x7FFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetSynchPrescaler(RTC_TypeDef *RTCx, uint32_t SynchPrescaler) +{ + MODIFY_REG(RTCx->PRER, RTC_PRER_PREDIV_S, SynchPrescaler); +} + +/** + * @brief Get Asynchronous prescaler factor + * @rmtoll RTC_PRER PREDIV_A LL_RTC_GetAsynchPrescaler + * @param RTCx RTC Instance + * @retval Value between Min_Data = 0 and Max_Data = 0x7F + */ +__STATIC_INLINE uint32_t LL_RTC_GetAsynchPrescaler(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->PRER, RTC_PRER_PREDIV_A) >> RTC_PRER_PREDIV_A_Pos); +} + +/** + * @brief Get Synchronous prescaler factor + * @rmtoll RTC_PRER PREDIV_S LL_RTC_GetSynchPrescaler + * @param RTCx RTC Instance + * @retval Value between Min_Data = 0 and Max_Data = 0x7FFF + */ +__STATIC_INLINE uint32_t LL_RTC_GetSynchPrescaler(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->PRER, RTC_PRER_PREDIV_S)); +} + +/** + * @brief Enable the write protection for RTC registers. + * @rmtoll RTC_WPR KEY LL_RTC_EnableWriteProtection + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableWriteProtection(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_DISABLE); +} + +/** + * @brief Disable the write protection for RTC registers. + * @rmtoll RTC_WPR KEY LL_RTC_DisableWriteProtection + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableWriteProtection(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_ENABLE_1); + WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_ENABLE_2); +} + +/** + * @brief Enable tamper output. + * @note When the tamper output is enabled, all external and internal tamper flags + * are ORed and routed to the TAMPALRM output. + * @rmtoll RTC_CR TAMPOE LL_RTC_EnableTamperOutput + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableTamperOutput(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TAMPOE); +} + +/** + * @brief Disable tamper output. + * @rmtoll RTC_CR TAMPOE LL_RTC_DisableTamperOutput + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableTamperOutput(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TAMPOE); +} + +/** + * @brief Check if tamper output is enabled or not. + * @rmtoll RTC_CR TAMPOE LL_RTC_IsTamperOutputEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsTamperOutputEnabled(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_TAMPOE) == (RTC_CR_TAMPOE)) ? 1UL : 0UL); +} + +/** + * @brief Enable internal pull-up in output mode. + * @rmtoll RTC_CR TAMPALRM_PU LL_RTC_EnableAlarmPullUp + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableAlarmPullUp(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TAMPALRM_PU); +} + +/** + * @brief Disable internal pull-up in output mode. + * @rmtoll RTC_CR TAMPALRM_PU LL_RTC_EnableAlarmPullUp + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableAlarmPullUp(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TAMPALRM_PU); +} + +/** + * @brief Check if internal pull-up in output mode is enabled or not. + * @rmtoll RTC_CR TAMPALRM_PU LL_RTC_IsAlarmPullUpEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsAlarmPullUpEnabled(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_TAMPALRM_PU) == (RTC_CR_TAMPALRM_PU)) ? 1UL : 0UL); +} + +/** + * @brief Enable RTC_OUT2 output + * @note RTC_OUT2 mapping depends on both OSEL (@ref LL_RTC_SetAlarmOutEvent) + * and COE (@ref LL_RTC_CAL_SetOutputFreq) settings. + * @note RTC_OUT2 is not available ins VBAT mode. + * @rmtoll RTC_CR OUT2EN LL_RTC_EnableOutput2 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableOutput2(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_OUT2EN); +} + +/** + * @brief Disable RTC_OUT2 output + * @rmtoll RTC_CR OUT2EN LL_RTC_DisableOutput2 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableOutput2(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_OUT2EN); +} + +/** + * @brief Check if RTC_OUT2 output is enabled or not. + * @rmtoll RTC_CR OUT2EN LL_RTC_IsOutput2Enabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsOutput2Enabled(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_OUT2EN) == (RTC_CR_OUT2EN)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Time Time + * @{ + */ + +/** + * @brief Set time format (AM/24-hour or PM notation) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll RTC_TR PM LL_RTC_TIME_SetFormat + * @param RTCx RTC Instance + * @param TimeFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24 + * @arg @ref LL_RTC_TIME_FORMAT_PM + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetFormat(RTC_TypeDef *RTCx, uint32_t TimeFormat) +{ + MODIFY_REG(RTCx->TR, RTC_TR_PM, TimeFormat); +} + +/** + * @brief Get time format (AM or PM notation) + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @rmtoll RTC_TR PM LL_RTC_TIME_GetFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24 + * @arg @ref LL_RTC_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TR, RTC_TR_PM)); +} + +/** + * @brief Set Hours in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert hour from binary to BCD format + * @rmtoll RTC_TR HT LL_RTC_TIME_SetHour\n + * RTC_TR HU LL_RTC_TIME_SetHour + * @param RTCx RTC Instance + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetHour(RTC_TypeDef *RTCx, uint32_t Hours) +{ + MODIFY_REG(RTCx->TR, (RTC_TR_HT | RTC_TR_HU), + (((Hours & 0xF0U) << (RTC_TR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_TR_HU_Pos))); +} + +/** + * @brief Get Hours in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert hour from BCD to + * Binary format + * @rmtoll RTC_TR HT LL_RTC_TIME_GetHour\n + * RTC_TR HU LL_RTC_TIME_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetHour(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->TR, (RTC_TR_HT | RTC_TR_HU))) >> RTC_TR_HU_Pos); +} + +/** + * @brief Set Minutes in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Minutes from binary to BCD format + * @rmtoll RTC_TR MNT LL_RTC_TIME_SetMinute\n + * RTC_TR MNU LL_RTC_TIME_SetMinute + * @param RTCx RTC Instance + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetMinute(RTC_TypeDef *RTCx, uint32_t Minutes) +{ + MODIFY_REG(RTCx->TR, (RTC_TR_MNT | RTC_TR_MNU), + (((Minutes & 0xF0U) << (RTC_TR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_TR_MNU_Pos))); +} + +/** + * @brief Get Minutes in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert minute from BCD + * to Binary format + * @rmtoll RTC_TR MNT LL_RTC_TIME_GetMinute\n + * RTC_TR MNU LL_RTC_TIME_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetMinute(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->TR, (RTC_TR_MNT | RTC_TR_MNU)))>> RTC_TR_MNU_Pos); +} + +/** + * @brief Set Seconds in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Seconds from binary to BCD format + * @rmtoll RTC_TR ST LL_RTC_TIME_SetSecond\n + * RTC_TR SU LL_RTC_TIME_SetSecond + * @param RTCx RTC Instance + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetSecond(RTC_TypeDef *RTCx, uint32_t Seconds) +{ + MODIFY_REG(RTCx->TR, (RTC_TR_ST | RTC_TR_SU), + (((Seconds & 0xF0U) << (RTC_TR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_TR_SU_Pos))); +} + +/** + * @brief Get Seconds in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD + * to Binary format + * @rmtoll RTC_TR ST LL_RTC_TIME_GetSecond\n + * RTC_TR SU LL_RTC_TIME_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetSecond(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->TR, (RTC_TR_ST | RTC_TR_SU))) >> RTC_TR_SU_Pos); +} + +/** + * @brief Set time (hour, minute and second) in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note TimeFormat and Hours should follow the same format + * @rmtoll RTC_TR PM LL_RTC_TIME_Config\n + * RTC_TR HT LL_RTC_TIME_Config\n + * RTC_TR HU LL_RTC_TIME_Config\n + * RTC_TR MNT LL_RTC_TIME_Config\n + * RTC_TR MNU LL_RTC_TIME_Config\n + * RTC_TR ST LL_RTC_TIME_Config\n + * RTC_TR SU LL_RTC_TIME_Config + * @param RTCx RTC Instance + * @param Format12_24 This parameter can be one of the following values: + * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24 + * @arg @ref LL_RTC_TIME_FORMAT_PM + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_Config(RTC_TypeDef *RTCx, uint32_t Format12_24, uint32_t Hours, uint32_t Minutes, uint32_t Seconds) +{ + uint32_t temp; + + temp = Format12_24 | \ + (((Hours & 0xF0U) << (RTC_TR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_TR_HU_Pos)) | \ + (((Minutes & 0xF0U) << (RTC_TR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_TR_MNU_Pos)) | \ + (((Seconds & 0xF0U) << (RTC_TR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_TR_SU_Pos)); + MODIFY_REG(RTCx->TR, (RTC_TR_PM | RTC_TR_HT | RTC_TR_HU | RTC_TR_MNT | RTC_TR_MNU | RTC_TR_ST | RTC_TR_SU), temp); +} + +/** + * @brief Get time (hour, minute and second) in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll RTC_TR HT LL_RTC_TIME_Get\n + * RTC_TR HU LL_RTC_TIME_Get\n + * RTC_TR MNT LL_RTC_TIME_Get\n + * RTC_TR MNU LL_RTC_TIME_Get\n + * RTC_TR ST LL_RTC_TIME_Get\n + * RTC_TR SU LL_RTC_TIME_Get + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds (Format: 0x00HHMMSS). + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_Get(RTC_TypeDef *RTCx) +{ + uint32_t temp; + + temp = READ_BIT(RTCx->TR, (RTC_TR_HT | RTC_TR_HU | RTC_TR_MNT | RTC_TR_MNU | RTC_TR_ST | RTC_TR_SU)); + return (uint32_t)((((((temp & RTC_TR_HT) >> RTC_TR_HT_Pos) << 4U) | ((temp & RTC_TR_HU) >> RTC_TR_HU_Pos)) << RTC_OFFSET_HOUR) | \ + (((((temp & RTC_TR_MNT) >> RTC_TR_MNT_Pos) << 4U) | ((temp & RTC_TR_MNU) >> RTC_TR_MNU_Pos)) << RTC_OFFSET_MINUTE) | \ + ((((temp & RTC_TR_ST) >> RTC_TR_ST_Pos) << 4U) | ((temp & RTC_TR_SU) >> RTC_TR_SU_Pos))); +} + +/** + * @brief Memorize whether the daylight saving time change has been performed + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR BKP LL_RTC_TIME_EnableDayLightStore + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_EnableDayLightStore(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_BKP); +} + +/** + * @brief Disable memorization whether the daylight saving time change has been performed. + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR BKP LL_RTC_TIME_DisableDayLightStore + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_DisableDayLightStore(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_BKP); +} + +/** + * @brief Check if RTC Day Light Saving stored operation has been enabled or not + * @rmtoll RTC_CR BKP LL_RTC_TIME_IsDayLightStoreEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_IsDayLightStoreEnabled(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_BKP) == (RTC_CR_BKP)) ? 1UL : 0UL); +} + +/** + * @brief Subtract 1 hour (winter time change) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR SUB1H LL_RTC_TIME_DecHour + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_DecHour(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_SUB1H); +} + +/** + * @brief Add 1 hour (summer time change) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ADD1H LL_RTC_TIME_IncHour + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_IncHour(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ADD1H); +} + +/** + * @brief Get Sub second value in the synchronous prescaler counter. + * @note You can use both SubSeconds value and SecondFraction (PREDIV_S through + * LL_RTC_GetSynchPrescaler function) terms returned to convert Calendar + * SubSeconds value in second fraction ratio with time unit following + * generic formula: + * ==> Seconds fraction ratio * time_unit= [(SecondFraction-SubSeconds)/(SecondFraction+1)] * time_unit + * This conversion can be performed only if no shift operation is pending + * (ie. SHFP=0) when PREDIV_S >= SS. + * @rmtoll RTC_SSR SS LL_RTC_TIME_GetSubSecond + * @param RTCx RTC Instance + * @retval Sub second value (number between 0 and 65535) + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetSubSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->SSR, RTC_SSR_SS)); +} + +/** + * @brief Synchronize to a remote clock with a high degree of precision. + * @note This operation effectively subtracts from (delays) or advance the clock of a fraction of a second. + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note When REFCKON is set, firmware must not write to Shift control register. + * @rmtoll RTC_SHIFTR ADD1S LL_RTC_TIME_Synchronize\n + * RTC_SHIFTR SUBFS LL_RTC_TIME_Synchronize + * @param RTCx RTC Instance + * @param ShiftSecond This parameter can be one of the following values: + * @arg @ref LL_RTC_SHIFT_SECOND_DELAY + * @arg @ref LL_RTC_SHIFT_SECOND_ADVANCE + * @param Fraction Number of Seconds Fractions (any value from 0 to 0x7FFF) + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_Synchronize(RTC_TypeDef *RTCx, uint32_t ShiftSecond, uint32_t Fraction) +{ + WRITE_REG(RTCx->SHIFTR, ShiftSecond | Fraction); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Date Date + * @{ + */ + +/** + * @brief Set Year in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Year from binary to BCD format + * @rmtoll RTC_DR YT LL_RTC_DATE_SetYear\n + * RTC_DR YU LL_RTC_DATE_SetYear + * @param RTCx RTC Instance + * @param Year Value between Min_Data=0x00 and Max_Data=0x99 + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetYear(RTC_TypeDef *RTCx, uint32_t Year) +{ + MODIFY_REG(RTCx->DR, (RTC_DR_YT | RTC_DR_YU), + (((Year & 0xF0U) << (RTC_DR_YT_Pos - 4U)) | ((Year & 0x0FU) << RTC_DR_YU_Pos))); +} + +/** + * @brief Get Year in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Year from BCD to Binary format + * @rmtoll RTC_DR YT LL_RTC_DATE_GetYear\n + * RTC_DR YU LL_RTC_DATE_GetYear + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x99 + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetYear(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->DR, (RTC_DR_YT | RTC_DR_YU))) >> RTC_DR_YU_Pos); +} + +/** + * @brief Set Week day + * @rmtoll RTC_DR WDU LL_RTC_DATE_SetWeekDay + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetWeekDay(RTC_TypeDef *RTCx, uint32_t WeekDay) +{ + MODIFY_REG(RTCx->DR, RTC_DR_WDU, WeekDay << RTC_DR_WDU_Pos); +} + +/** + * @brief Get Week day + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @rmtoll RTC_DR WDU LL_RTC_DATE_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetWeekDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->DR, RTC_DR_WDU) >> RTC_DR_WDU_Pos); +} + +/** + * @brief Set Month in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Month from binary to BCD format + * @rmtoll RTC_DR MT LL_RTC_DATE_SetMonth\n + * RTC_DR MU LL_RTC_DATE_SetMonth + * @param RTCx RTC Instance + * @param Month This parameter can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetMonth(RTC_TypeDef *RTCx, uint32_t Month) +{ + MODIFY_REG(RTCx->DR, (RTC_DR_MT | RTC_DR_MU), + (((Month & 0xF0U) << (RTC_DR_MT_Pos - 4U)) | ((Month & 0x0FU) << RTC_DR_MU_Pos))); +} + +/** + * @brief Get Month in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Month from BCD to Binary format + * @rmtoll RTC_DR MT LL_RTC_DATE_GetMonth\n + * RTC_DR MU LL_RTC_DATE_GetMonth + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetMonth(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->DR, (RTC_DR_MT | RTC_DR_MU)))>> RTC_DR_MU_Pos); +} + +/** + * @brief Set Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Day from binary to BCD format + * @rmtoll RTC_DR DT LL_RTC_DATE_SetDay\n + * RTC_DR DU LL_RTC_DATE_SetDay + * @param RTCx RTC Instance + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetDay(RTC_TypeDef *RTCx, uint32_t Day) +{ + MODIFY_REG(RTCx->DR, (RTC_DR_DT | RTC_DR_DU), + (((Day & 0xF0U) << (RTC_DR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_DR_DU_Pos))); +} + +/** + * @brief Get Day in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll RTC_DR DT LL_RTC_DATE_GetDay\n + * RTC_DR DU LL_RTC_DATE_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetDay(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->DR, (RTC_DR_DT | RTC_DR_DU))) >> RTC_DR_DU_Pos); +} + +/** + * @brief Set date (WeekDay, Day, Month and Year) in BCD format + * @rmtoll RTC_DR WDU LL_RTC_DATE_Config\n + * RTC_DR MT LL_RTC_DATE_Config\n + * RTC_DR MU LL_RTC_DATE_Config\n + * RTC_DR DT LL_RTC_DATE_Config\n + * RTC_DR DU LL_RTC_DATE_Config\n + * RTC_DR YT LL_RTC_DATE_Config\n + * RTC_DR YU LL_RTC_DATE_Config + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @param Month This parameter can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + * @param Year Value between Min_Data=0x00 and Max_Data=0x99 + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_Config(RTC_TypeDef *RTCx, uint32_t WeekDay, uint32_t Day, uint32_t Month, uint32_t Year) +{ + uint32_t temp; + + temp = (WeekDay << RTC_DR_WDU_Pos) | \ + (((Year & 0xF0U) << (RTC_DR_YT_Pos - 4U)) | ((Year & 0x0FU) << RTC_DR_YU_Pos)) | \ + (((Month & 0xF0U) << (RTC_DR_MT_Pos - 4U)) | ((Month & 0x0FU) << RTC_DR_MU_Pos)) | \ + (((Day & 0xF0U) << (RTC_DR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_DR_DU_Pos)); + + MODIFY_REG(RTCx->DR, (RTC_DR_WDU | RTC_DR_MT | RTC_DR_MU | RTC_DR_DT | RTC_DR_DU | RTC_DR_YT | RTC_DR_YU), temp); +} + +/** + * @brief Get date (WeekDay, Day, Month and Year) in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macros __LL_RTC_GET_WEEKDAY, __LL_RTC_GET_YEAR, __LL_RTC_GET_MONTH, + * and __LL_RTC_GET_DAY are available to get independently each parameter. + * @rmtoll RTC_DR WDU LL_RTC_DATE_Get\n + * RTC_DR MT LL_RTC_DATE_Get\n + * RTC_DR MU LL_RTC_DATE_Get\n + * RTC_DR DT LL_RTC_DATE_Get\n + * RTC_DR DU LL_RTC_DATE_Get\n + * RTC_DR YT LL_RTC_DATE_Get\n + * RTC_DR YU LL_RTC_DATE_Get + * @param RTCx RTC Instance + * @retval Combination of WeekDay, Day, Month and Year (Format: 0xWWDDMMYY). + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_Get(RTC_TypeDef *RTCx) +{ + uint32_t temp; + + temp = READ_BIT(RTCx->DR, (RTC_DR_WDU | RTC_DR_MT | RTC_DR_MU | RTC_DR_DT | RTC_DR_DU | RTC_DR_YT | RTC_DR_YU)); + return (uint32_t)((((temp & RTC_DR_WDU) >> RTC_DR_WDU_Pos) << RTC_OFFSET_WEEKDAY) | \ + (((((temp & RTC_DR_DT) >> RTC_DR_DT_Pos) << 4U) | ((temp & RTC_DR_DU) >> RTC_DR_DU_Pos)) << RTC_OFFSET_DAY) | \ + (((((temp & RTC_DR_MT) >> RTC_DR_MT_Pos) << 4U) | ((temp & RTC_DR_MU) >> RTC_DR_MU_Pos)) << RTC_OFFSET_MONTH) | \ + ((((temp & RTC_DR_YT) >> RTC_DR_YT_Pos) << 4U) | ((temp & RTC_DR_YU) >> RTC_DR_YU_Pos))); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_ALARMA ALARMA + * @{ + */ + +/** + * @brief Enable Alarm A + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRAE LL_RTC_ALMA_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ALRAE); +} + +/** + * @brief Disable Alarm A + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRAE LL_RTC_ALMA_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ALRAE); +} + +/** + * @brief Specify the Alarm A masks. + * @rmtoll RTC_ALRMAR MSK4 LL_RTC_ALMA_SetMask\n + * RTC_ALRMAR MSK3 LL_RTC_ALMA_SetMask\n + * RTC_ALRMAR MSK2 LL_RTC_ALMA_SetMask\n + * RTC_ALRMAR MSK1 LL_RTC_ALMA_SetMask + * @param RTCx RTC Instance + * @param Mask This parameter can be a combination of the following values: + * @arg @ref LL_RTC_ALMA_MASK_NONE + * @arg @ref LL_RTC_ALMA_MASK_DATEWEEKDAY + * @arg @ref LL_RTC_ALMA_MASK_HOURS + * @arg @ref LL_RTC_ALMA_MASK_MINUTES + * @arg @ref LL_RTC_ALMA_MASK_SECONDS + * @arg @ref LL_RTC_ALMA_MASK_ALL + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1, Mask); +} + +/** + * @brief Get the Alarm A masks. + * @rmtoll RTC_ALRMAR MSK4 LL_RTC_ALMA_GetMask\n + * RTC_ALRMAR MSK3 LL_RTC_ALMA_GetMask\n + * RTC_ALRMAR MSK2 LL_RTC_ALMA_GetMask\n + * RTC_ALRMAR MSK1 LL_RTC_ALMA_GetMask + * @param RTCx RTC Instance + * @retval Returned value can be can be a combination of the following values: + * @arg @ref LL_RTC_ALMA_MASK_NONE + * @arg @ref LL_RTC_ALMA_MASK_DATEWEEKDAY + * @arg @ref LL_RTC_ALMA_MASK_HOURS + * @arg @ref LL_RTC_ALMA_MASK_MINUTES + * @arg @ref LL_RTC_ALMA_MASK_SECONDS + * @arg @ref LL_RTC_ALMA_MASK_ALL + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetMask(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1)); +} + +/** + * @brief Enable AlarmA Week day selection (DU[3:0] represents the week day. DT[1:0] is do not care) + * @rmtoll RTC_ALRMAR WDSEL LL_RTC_ALMA_EnableWeekday + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_EnableWeekday(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->ALRMAR, RTC_ALRMAR_WDSEL); +} + +/** + * @brief Disable AlarmA Week day selection (DU[3:0] represents the date ) + * @rmtoll RTC_ALRMAR WDSEL LL_RTC_ALMA_DisableWeekday + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_DisableWeekday(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->ALRMAR, RTC_ALRMAR_WDSEL); +} + +/** + * @brief Set ALARM A Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Day from binary to BCD format + * @rmtoll RTC_ALRMAR DT LL_RTC_ALMA_SetDay\n + * RTC_ALRMAR DU LL_RTC_ALMA_SetDay + * @param RTCx RTC Instance + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetDay(RTC_TypeDef *RTCx, uint32_t Day) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_DT | RTC_ALRMAR_DU), + (((Day & 0xF0U) << (RTC_ALRMAR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_ALRMAR_DU_Pos))); +} + +/** + * @brief Get ALARM A Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll RTC_ALRMAR DT LL_RTC_ALMA_GetDay\n + * RTC_ALRMAR DU LL_RTC_ALMA_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetDay(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_DT | RTC_ALRMAR_DU))) >> RTC_ALRMAR_DU_Pos); +} + +/** + * @brief Set ALARM A Weekday + * @rmtoll RTC_ALRMAR DU LL_RTC_ALMA_SetWeekDay + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetWeekDay(RTC_TypeDef *RTCx, uint32_t WeekDay) +{ + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_DU, WeekDay << RTC_ALRMAR_DU_Pos); +} + +/** + * @brief Get ALARM A Weekday + * @rmtoll RTC_ALRMAR DU LL_RTC_ALMA_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetWeekDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_DU) >> RTC_ALRMAR_DU_Pos); +} + +/** + * @brief Set Alarm A time format (AM/24-hour or PM notation) + * @rmtoll RTC_ALRMAR PM LL_RTC_ALMA_SetTimeFormat + * @param RTCx RTC Instance + * @param TimeFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetTimeFormat(RTC_TypeDef *RTCx, uint32_t TimeFormat) +{ + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_PM, TimeFormat); +} + +/** + * @brief Get Alarm A time format (AM or PM notation) + * @rmtoll RTC_ALRMAR PM LL_RTC_ALMA_GetTimeFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetTimeFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_PM)); +} + +/** + * @brief Set ALARM A Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Hours from binary to BCD format + * @rmtoll RTC_ALRMAR HT LL_RTC_ALMA_SetHour\n + * RTC_ALRMAR HU LL_RTC_ALMA_SetHour + * @param RTCx RTC Instance + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetHour(RTC_TypeDef *RTCx, uint32_t Hours) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_HT | RTC_ALRMAR_HU), + (((Hours & 0xF0U) << (RTC_ALRMAR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMAR_HU_Pos))); +} + +/** + * @brief Get ALARM A Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Hours from BCD to Binary format + * @rmtoll RTC_ALRMAR HT LL_RTC_ALMA_GetHour\n + * RTC_ALRMAR HU LL_RTC_ALMA_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetHour(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_HT | RTC_ALRMAR_HU))) >> RTC_ALRMAR_HU_Pos); +} + +/** + * @brief Set ALARM A Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Minutes from binary to BCD format + * @rmtoll RTC_ALRMAR MNT LL_RTC_ALMA_SetMinute\n + * RTC_ALRMAR MNU LL_RTC_ALMA_SetMinute + * @param RTCx RTC Instance + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetMinute(RTC_TypeDef *RTCx, uint32_t Minutes) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU), + (((Minutes & 0xF0U) << (RTC_ALRMAR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMAR_MNU_Pos))); +} + +/** + * @brief Get ALARM A Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Minutes from BCD to Binary format + * @rmtoll RTC_ALRMAR MNT LL_RTC_ALMA_GetMinute\n + * RTC_ALRMAR MNU LL_RTC_ALMA_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetMinute(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU))) >> RTC_ALRMAR_MNU_Pos); +} + +/** + * @brief Set ALARM A Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Seconds from binary to BCD format + * @rmtoll RTC_ALRMAR ST LL_RTC_ALMA_SetSecond\n + * RTC_ALRMAR SU LL_RTC_ALMA_SetSecond + * @param RTCx RTC Instance + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetSecond(RTC_TypeDef *RTCx, uint32_t Seconds) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_ST | RTC_ALRMAR_SU), + (((Seconds & 0xF0U) << (RTC_ALRMAR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMAR_SU_Pos))); +} + +/** + * @brief Get ALARM A Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD to Binary format + * @rmtoll RTC_ALRMAR ST LL_RTC_ALMA_GetSecond\n + * RTC_ALRMAR SU LL_RTC_ALMA_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSecond(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_ST | RTC_ALRMAR_SU))) >> RTC_ALRMAR_SU_Pos); +} + +/** + * @brief Set Alarm A Time (hour, minute and second) in BCD format + * @rmtoll RTC_ALRMAR PM LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR HT LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR HU LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR MNT LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR MNU LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR ST LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR SU LL_RTC_ALMA_ConfigTime + * @param RTCx RTC Instance + * @param Format12_24 This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_ConfigTime(RTC_TypeDef *RTCx, uint32_t Format12_24, uint32_t Hours, uint32_t Minutes, uint32_t Seconds) +{ + uint32_t temp; + + temp = Format12_24 | (((Hours & 0xF0U) << (RTC_ALRMAR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMAR_HU_Pos)) | \ + (((Minutes & 0xF0U) << (RTC_ALRMAR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMAR_MNU_Pos)) | \ + (((Seconds & 0xF0U) << (RTC_ALRMAR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMAR_SU_Pos)); + + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_PM | RTC_ALRMAR_HT | RTC_ALRMAR_HU | RTC_ALRMAR_MNT | RTC_ALRMAR_MNU | RTC_ALRMAR_ST | RTC_ALRMAR_SU, temp); +} + +/** + * @brief Get Alarm B Time (hour, minute and second) in BCD format + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll RTC_ALRMAR HT LL_RTC_ALMA_GetTime\n + * RTC_ALRMAR HU LL_RTC_ALMA_GetTime\n + * RTC_ALRMAR MNT LL_RTC_ALMA_GetTime\n + * RTC_ALRMAR MNU LL_RTC_ALMA_GetTime\n + * RTC_ALRMAR ST LL_RTC_ALMA_GetTime\n + * RTC_ALRMAR SU LL_RTC_ALMA_GetTime + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds. + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetTime(RTC_TypeDef *RTCx) +{ + return (uint32_t)((LL_RTC_ALMA_GetHour(RTCx) << RTC_OFFSET_HOUR) | (LL_RTC_ALMA_GetMinute(RTCx) << RTC_OFFSET_MINUTE) | LL_RTC_ALMA_GetSecond(RTCx)); +} + +/** + * @brief Set Alarm A Mask the most-significant bits starting at this bit + * @note This register can be written only when ALRAE is reset in RTC_CR register, + * or in initialization mode. + * @rmtoll RTC_ALRMASSR MASKSS LL_RTC_ALMA_SetSubSecondMask + * @param RTCx RTC Instance + * @param Mask Value between Min_Data=0x00 and Max_Data=0xF + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetSubSecondMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + MODIFY_REG(RTCx->ALRMASSR, RTC_ALRMASSR_MASKSS, Mask << RTC_ALRMASSR_MASKSS_Pos); +} + +/** + * @brief Get Alarm A Mask the most-significant bits starting at this bit + * @rmtoll RTC_ALRMASSR MASKSS LL_RTC_ALMA_GetSubSecondMask + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSubSecondMask(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMASSR, RTC_ALRMASSR_MASKSS) >> RTC_ALRMASSR_MASKSS_Pos); +} + +/** + * @brief Set Alarm A Sub seconds value + * @rmtoll RCT_ALRMASSR SS LL_RTC_ALMA_SetSubSecond + * @param RTCx RTC Instance + * @param Subsecond Value between Min_Data=0x00 and Max_Data=0x7FFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetSubSecond(RTC_TypeDef *RTCx, uint32_t Subsecond) +{ + MODIFY_REG(RTCx->ALRMASSR, RTC_ALRMASSR_SS, Subsecond); +} + +/** + * @brief Get Alarm A Sub seconds value + * @rmtoll RCT_ALRMASSR SS LL_RTC_ALMA_GetSubSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x7FFF + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSubSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMASSR, RTC_ALRMASSR_SS)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_ALARMB ALARMB + * @{ + */ + +/** + * @brief Enable Alarm B + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRBE LL_RTC_ALMB_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ALRBE); +} + +/** + * @brief Disable Alarm B + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRBE LL_RTC_ALMB_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ALRBE); +} + +/** + * @brief Specify the Alarm B masks. + * @rmtoll RTC_ALRMBR MSK4 LL_RTC_ALMB_SetMask\n + * RTC_ALRMBR MSK3 LL_RTC_ALMB_SetMask\n + * RTC_ALRMBR MSK2 LL_RTC_ALMB_SetMask\n + * RTC_ALRMBR MSK1 LL_RTC_ALMB_SetMask + * @param RTCx RTC Instance + * @param Mask This parameter can be a combination of the following values: + * @arg @ref LL_RTC_ALMB_MASK_NONE + * @arg @ref LL_RTC_ALMB_MASK_DATEWEEKDAY + * @arg @ref LL_RTC_ALMB_MASK_HOURS + * @arg @ref LL_RTC_ALMB_MASK_MINUTES + * @arg @ref LL_RTC_ALMB_MASK_SECONDS + * @arg @ref LL_RTC_ALMB_MASK_ALL + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + MODIFY_REG(RTCx->ALRMBR, RTC_ALRMBR_MSK4 | RTC_ALRMBR_MSK3 | RTC_ALRMBR_MSK2 | RTC_ALRMBR_MSK1, Mask); +} + +/** + * @brief Get the Alarm B masks. + * @rmtoll RTC_ALRMBR MSK4 LL_RTC_ALMB_GetMask\n + * RTC_ALRMBR MSK3 LL_RTC_ALMB_GetMask\n + * RTC_ALRMBR MSK2 LL_RTC_ALMB_GetMask\n + * RTC_ALRMBR MSK1 LL_RTC_ALMB_GetMask + * @param RTCx RTC Instance + * @retval Returned value can be can be a combination of the following values: + * @arg @ref LL_RTC_ALMB_MASK_NONE + * @arg @ref LL_RTC_ALMB_MASK_DATEWEEKDAY + * @arg @ref LL_RTC_ALMB_MASK_HOURS + * @arg @ref LL_RTC_ALMB_MASK_MINUTES + * @arg @ref LL_RTC_ALMB_MASK_SECONDS + * @arg @ref LL_RTC_ALMB_MASK_ALL + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetMask(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMBR, RTC_ALRMBR_MSK4 | RTC_ALRMBR_MSK3 | RTC_ALRMBR_MSK2 | RTC_ALRMBR_MSK1)); +} + +/** + * @brief Enable AlarmB Week day selection (DU[3:0] represents the week day. DT[1:0] is do not care) + * @rmtoll RTC_ALRMBR WDSEL LL_RTC_ALMB_EnableWeekday + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_EnableWeekday(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->ALRMBR, RTC_ALRMBR_WDSEL); +} + +/** + * @brief Disable AlarmB Week day selection (DU[3:0] represents the date ) + * @rmtoll RTC_ALRMBR WDSEL LL_RTC_ALMB_DisableWeekday + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_DisableWeekday(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->ALRMBR, RTC_ALRMBR_WDSEL); +} + +/** + * @brief Set ALARM B Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Day from binary to BCD format + * @rmtoll RTC_ALRMBR DT LL_RTC_ALMB_SetDay\n + * RTC_ALRMBR DU LL_RTC_ALMB_SetDay + * @param RTCx RTC Instance + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetDay(RTC_TypeDef *RTCx, uint32_t Day) +{ + MODIFY_REG(RTCx->ALRMBR, (RTC_ALRMBR_DT | RTC_ALRMBR_DU), + (((Day & 0xF0U) << (RTC_ALRMBR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_ALRMBR_DU_Pos))); +} + +/** + * @brief Get ALARM B Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll RTC_ALRMBR DT LL_RTC_ALMB_GetDay\n + * RTC_ALRMBR DU LL_RTC_ALMB_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetDay(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ALRMBR, (RTC_ALRMBR_DT | RTC_ALRMBR_DU))) >> RTC_ALRMBR_DU_Pos); +} + +/** + * @brief Set ALARM B Weekday + * @rmtoll RTC_ALRMBR DU LL_RTC_ALMB_SetWeekDay + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetWeekDay(RTC_TypeDef *RTCx, uint32_t WeekDay) +{ + MODIFY_REG(RTCx->ALRMBR, RTC_ALRMBR_DU, WeekDay << RTC_ALRMBR_DU_Pos); +} + +/** + * @brief Get ALARM B Weekday + * @rmtoll RTC_ALRMBR DU LL_RTC_ALMB_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetWeekDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMBR, RTC_ALRMBR_DU) >> RTC_ALRMBR_DU_Pos); +} + +/** + * @brief Set ALARM B time format (AM/24-hour or PM notation) + * @rmtoll RTC_ALRMBR PM LL_RTC_ALMB_SetTimeFormat + * @param RTCx RTC Instance + * @param TimeFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_PM + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetTimeFormat(RTC_TypeDef *RTCx, uint32_t TimeFormat) +{ + MODIFY_REG(RTCx->ALRMBR, RTC_ALRMBR_PM, TimeFormat); +} + +/** + * @brief Get ALARM B time format (AM or PM notation) + * @rmtoll RTC_ALRMBR PM LL_RTC_ALMB_GetTimeFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetTimeFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMBR, RTC_ALRMBR_PM)); +} + +/** + * @brief Set ALARM B Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Hours from binary to BCD format + * @rmtoll RTC_ALRMBR HT LL_RTC_ALMB_SetHour\n + * RTC_ALRMBR HU LL_RTC_ALMB_SetHour + * @param RTCx RTC Instance + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetHour(RTC_TypeDef *RTCx, uint32_t Hours) +{ + MODIFY_REG(RTCx->ALRMBR, (RTC_ALRMBR_HT | RTC_ALRMBR_HU), + (((Hours & 0xF0U) << (RTC_ALRMBR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMBR_HU_Pos))); +} + +/** + * @brief Get ALARM B Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Hours from BCD to Binary format + * @rmtoll RTC_ALRMBR HT LL_RTC_ALMB_GetHour\n + * RTC_ALRMBR HU LL_RTC_ALMB_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetHour(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ALRMBR, (RTC_ALRMBR_HT | RTC_ALRMBR_HU))) >> RTC_ALRMBR_HU_Pos); +} + +/** + * @brief Set ALARM B Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Minutes from binary to BCD format + * @rmtoll RTC_ALRMBR MNT LL_RTC_ALMB_SetMinute\n + * RTC_ALRMBR MNU LL_RTC_ALMB_SetMinute + * @param RTCx RTC Instance + * @param Minutes between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetMinute(RTC_TypeDef *RTCx, uint32_t Minutes) +{ + MODIFY_REG(RTCx->ALRMBR, (RTC_ALRMBR_MNT | RTC_ALRMBR_MNU), + (((Minutes & 0xF0U) << (RTC_ALRMBR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMBR_MNU_Pos))); +} + +/** + * @brief Get ALARM B Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Minutes from BCD to Binary format + * @rmtoll RTC_ALRMBR MNT LL_RTC_ALMB_GetMinute\n + * RTC_ALRMBR MNU LL_RTC_ALMB_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetMinute(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ALRMBR, (RTC_ALRMBR_MNT | RTC_ALRMBR_MNU))) >> RTC_ALRMBR_MNU_Pos); +} + +/** + * @brief Set ALARM B Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Seconds from binary to BCD format + * @rmtoll RTC_ALRMBR ST LL_RTC_ALMB_SetSecond\n + * RTC_ALRMBR SU LL_RTC_ALMB_SetSecond + * @param RTCx RTC Instance + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetSecond(RTC_TypeDef *RTCx, uint32_t Seconds) +{ + MODIFY_REG(RTCx->ALRMBR, (RTC_ALRMBR_ST | RTC_ALRMBR_SU), + (((Seconds & 0xF0U) << (RTC_ALRMBR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMBR_SU_Pos))); +} + +/** + * @brief Get ALARM B Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD to Binary format + * @rmtoll RTC_ALRMBR ST LL_RTC_ALMB_GetSecond\n + * RTC_ALRMBR SU LL_RTC_ALMB_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetSecond(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ALRMBR, (RTC_ALRMBR_ST | RTC_ALRMBR_SU))) >> RTC_ALRMBR_SU_Pos); +} + +/** + * @brief Set Alarm B Time (hour, minute and second) in BCD format + * @rmtoll RTC_ALRMBR PM LL_RTC_ALMB_ConfigTime\n + * RTC_ALRMBR HT LL_RTC_ALMB_ConfigTime\n + * RTC_ALRMBR HU LL_RTC_ALMB_ConfigTime\n + * RTC_ALRMBR MNT LL_RTC_ALMB_ConfigTime\n + * RTC_ALRMBR MNU LL_RTC_ALMB_ConfigTime\n + * RTC_ALRMBR ST LL_RTC_ALMB_ConfigTime\n + * RTC_ALRMBR SU LL_RTC_ALMB_ConfigTime + * @param RTCx RTC Instance + * @param Format12_24 This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_PM + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_ConfigTime(RTC_TypeDef *RTCx, uint32_t Format12_24, uint32_t Hours, uint32_t Minutes, uint32_t Seconds) +{ + uint32_t temp; + + temp = Format12_24 | (((Hours & 0xF0U) << (RTC_ALRMBR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMBR_HU_Pos)) | \ + (((Minutes & 0xF0U) << (RTC_ALRMBR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMBR_MNU_Pos)) | \ + (((Seconds & 0xF0U) << (RTC_ALRMBR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMBR_SU_Pos)); + + MODIFY_REG(RTCx->ALRMBR, RTC_ALRMBR_PM| RTC_ALRMBR_HT | RTC_ALRMBR_HU | RTC_ALRMBR_MNT | RTC_ALRMBR_MNU | RTC_ALRMBR_ST | RTC_ALRMBR_SU, temp); +} + +/** + * @brief Get Alarm B Time (hour, minute and second) in BCD format + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll RTC_ALRMBR HT LL_RTC_ALMB_GetTime\n + * RTC_ALRMBR HU LL_RTC_ALMB_GetTime\n + * RTC_ALRMBR MNT LL_RTC_ALMB_GetTime\n + * RTC_ALRMBR MNU LL_RTC_ALMB_GetTime\n + * RTC_ALRMBR ST LL_RTC_ALMB_GetTime\n + * RTC_ALRMBR SU LL_RTC_ALMB_GetTime + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds. + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetTime(RTC_TypeDef *RTCx) +{ + return (uint32_t)((LL_RTC_ALMB_GetHour(RTCx) << RTC_OFFSET_HOUR) | (LL_RTC_ALMB_GetMinute(RTCx) << RTC_OFFSET_MINUTE) | LL_RTC_ALMB_GetSecond(RTCx)); +} + +/** + * @brief Set Alarm B Mask the most-significant bits starting at this bit + * @note This register can be written only when ALRBE is reset in RTC_CR register, + * or in initialization mode. + * @rmtoll RTC_ALRMBSSR MASKSS LL_RTC_ALMB_SetSubSecondMask + * @param RTCx RTC Instance + * @param Mask Value between Min_Data=0x00 and Max_Data=0xF + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetSubSecondMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + MODIFY_REG(RTCx->ALRMBSSR, RTC_ALRMBSSR_MASKSS, Mask << RTC_ALRMBSSR_MASKSS_Pos); +} + +/** + * @brief Get Alarm B Mask the most-significant bits starting at this bit + * @rmtoll RTC_ALRMBSSR MASKSS LL_RTC_ALMB_GetSubSecondMask + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetSubSecondMask(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMBSSR, RTC_ALRMBSSR_MASKSS) >> RTC_ALRMBSSR_MASKSS_Pos); +} + +/** + * @brief Set Alarm B Sub seconds value + * @rmtoll RTC_ALRMBSSR SS LL_RTC_ALMB_SetSubSecond + * @param RTCx RTC Instance + * @param Subsecond Value between Min_Data=0x00 and Max_Data=0x7FFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetSubSecond(RTC_TypeDef *RTCx, uint32_t Subsecond) +{ + MODIFY_REG(RTCx->ALRMBSSR, RTC_ALRMBSSR_SS, Subsecond); +} + +/** + * @brief Get Alarm B Sub seconds value + * @rmtoll RTC_ALRMBSSR SS LL_RTC_ALMB_GetSubSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x7FFF + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetSubSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMBSSR, RTC_ALRMBSSR_SS)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Timestamp Timestamp + * @{ + */ + +/** + * @brief Enable internal event timestamp + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ITSE LL_RTC_TS_EnableInternalEvent + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_EnableInternalEvent(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ITSE); +} + +/** + * @brief Disable internal event timestamp + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ITSE LL_RTC_TS_DisableInternalEvent + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_DisableInternalEvent(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ITSE); +} + +/** + * @brief Enable Timestamp + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR TSE LL_RTC_TS_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TSE); +} + +/** + * @brief Disable Timestamp + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR TSE LL_RTC_TS_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TSE); +} + +/** + * @brief Set Time-stamp event active edge + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note TSE must be reset when TSEDGE is changed to avoid unwanted TSF setting + * @rmtoll RTC_CR TSEDGE LL_RTC_TS_SetActiveEdge + * @param RTCx RTC Instance + * @param Edge This parameter can be one of the following values: + * @arg @ref LL_RTC_TIMESTAMP_EDGE_RISING + * @arg @ref LL_RTC_TIMESTAMP_EDGE_FALLING + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_SetActiveEdge(RTC_TypeDef *RTCx, uint32_t Edge) +{ + MODIFY_REG(RTCx->CR, RTC_CR_TSEDGE, Edge); +} + +/** + * @brief Get Time-stamp event active edge + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR TSEDGE LL_RTC_TS_GetActiveEdge + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TIMESTAMP_EDGE_RISING + * @arg @ref LL_RTC_TIMESTAMP_EDGE_FALLING + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetActiveEdge(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_TSEDGE)); +} + +/** + * @brief Get Timestamp AM/PM notation (AM or 24-hour format) + * @rmtoll RTC_TSTR PM LL_RTC_TS_GetTimeFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TS_TIME_FORMAT_AM + * @arg @ref LL_RTC_TS_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetTimeFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_PM)); +} + +/** + * @brief Get Timestamp Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Hours from BCD to Binary format + * @rmtoll RTC_TSTR HT LL_RTC_TS_GetHour\n + * RTC_TSTR HU LL_RTC_TS_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetHour(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_HT | RTC_TSTR_HU) >> RTC_TSTR_HU_Pos); +} + +/** + * @brief Get Timestamp Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Minutes from BCD to Binary format + * @rmtoll RTC_TSTR MNT LL_RTC_TS_GetMinute\n + * RTC_TSTR MNU LL_RTC_TS_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetMinute(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_MNT | RTC_TSTR_MNU) >> RTC_TSTR_MNU_Pos); +} + +/** + * @brief Get Timestamp Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD to Binary format + * @rmtoll RTC_TSTR ST LL_RTC_TS_GetSecond\n + * RTC_TSTR SU LL_RTC_TS_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_ST | RTC_TSTR_SU)); +} + +/** + * @brief Get Timestamp time (hour, minute and second) in BCD format + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll RTC_TSTR HT LL_RTC_TS_GetTime\n + * RTC_TSTR HU LL_RTC_TS_GetTime\n + * RTC_TSTR MNT LL_RTC_TS_GetTime\n + * RTC_TSTR MNU LL_RTC_TS_GetTime\n + * RTC_TSTR ST LL_RTC_TS_GetTime\n + * RTC_TSTR SU LL_RTC_TS_GetTime + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds. + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetTime(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, + RTC_TSTR_HT | RTC_TSTR_HU | RTC_TSTR_MNT | RTC_TSTR_MNU | RTC_TSTR_ST | RTC_TSTR_SU)); +} + +/** + * @brief Get Timestamp Week day + * @rmtoll RTC_TSDR WDU LL_RTC_TS_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetWeekDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_WDU) >> RTC_TSDR_WDU_Pos); +} + +/** + * @brief Get Timestamp Month in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Month from BCD to Binary format + * @rmtoll RTC_TSDR MT LL_RTC_TS_GetMonth\n + * RTC_TSDR MU LL_RTC_TS_GetMonth + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetMonth(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_MT | RTC_TSDR_MU) >> RTC_TSDR_MU_Pos); +} + +/** + * @brief Get Timestamp Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll RTC_TSDR DT LL_RTC_TS_GetDay\n + * RTC_TSDR DU LL_RTC_TS_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_DT | RTC_TSDR_DU)); +} + +/** + * @brief Get Timestamp date (WeekDay, Day and Month) in BCD format + * @note helper macros __LL_RTC_GET_WEEKDAY, __LL_RTC_GET_MONTH, + * and __LL_RTC_GET_DAY are available to get independently each parameter. + * @rmtoll RTC_TSDR WDU LL_RTC_TS_GetDate\n + * RTC_TSDR MT LL_RTC_TS_GetDate\n + * RTC_TSDR MU LL_RTC_TS_GetDate\n + * RTC_TSDR DT LL_RTC_TS_GetDate\n + * RTC_TSDR DU LL_RTC_TS_GetDate + * @param RTCx RTC Instance + * @retval Combination of Weekday, Day and Month + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetDate(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_WDU | RTC_TSDR_MT | RTC_TSDR_MU | RTC_TSDR_DT | RTC_TSDR_DU)); +} + +/** + * @brief Get time-stamp sub second value + * @rmtoll RTC_TSSSR SS LL_RTC_TS_GetSubSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetSubSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSSSR, RTC_TSSSR_SS)); +} + +/** + * @brief Activate timestamp on tamper detection event + * @rmtoll RTC_CR TAMPTS LL_RTC_TS_EnableOnTamper + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_EnableOnTamper(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TAMPTS); +} + +/** + * @brief Disable timestamp on tamper detection event + * @rmtoll RTC_CR TAMPTS LL_RTC_TS_DisableOnTamper + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_DisableOnTamper(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TAMPTS); +} + + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Tamper Tamper + * @{ + */ + +/** + * @brief Enable TAMPx input detection + * @rmtoll TAMP_CR1 TAMP1E LL_RTC_TAMPER_Enable\n + * TAMP_CR1 TAMP2E LL_RTC_TAMPER_Enable\n + * TAMP_CR1 TAMP3E LL_RTC_TAMPER_Enable + * @param TAMPx TAMP Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_1 + * @arg @ref LL_RTC_TAMPER_2 + * @arg @ref LL_RTC_TAMPER_3 (*) + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_Enable(TAMP_TypeDef *TAMPx, uint32_t Tamper) +{ + SET_BIT(TAMPx->CR1, Tamper); +} + +/** + * @brief Clear TAMPx input detection + * @rmtoll TAMP_CR1 TAMP1E LL_RTC_TAMPER_Disable\n + * TAMP_CR1 TAMP2E LL_RTC_TAMPER_Disable\n + * TAMP_CR1 TAMP3E LL_RTC_TAMPER_Disable + * @param TAMPx TAMP Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_1 + * @arg @ref LL_RTC_TAMPER_2 + * @arg @ref LL_RTC_TAMPER_2 (*) + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_Disable(TAMP_TypeDef *TAMPx, uint32_t Tamper) +{ + CLEAR_BIT(TAMPx->CR1, Tamper); +} + +/** + * @brief Enable Tamper mask flag + * @note Associated Tamper IT must not enabled when tamper mask is set. + * @rmtoll TAMP_CR2 TAMP1MF LL_RTC_TAMPER_EnableMask\n + * TAMP_CR2 TAMP2MF LL_RTC_TAMPER_EnableMask\n + * TAMP_CR2 TAMP3MF LL_RTC_TAMPER_EnableMask + * @param TAMPx TAMP Instance + * @param Mask This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_MASK_TAMPER1 + * @arg @ref LL_RTC_TAMPER_MASK_TAMPER2 + * @arg @ref LL_RTC_TAMPER_MASK_TAMPER3 (*) + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_EnableMask(TAMP_TypeDef *TAMPx, uint32_t Mask) +{ + SET_BIT(TAMPx->CR2, Mask); +} + +/** + * @brief Disable Tamper mask flag + * @rmtoll TAMP_CR2 TAMP1MF LL_RTC_TAMPER_DisableMask\n + * TAMP_CR2 TAMP2MF LL_RTC_TAMPER_DisableMask\n + * TAMP_CR2 TAMP3MF LL_RTC_TAMPER_DisableMask + * @param TAMPx TAMP Instance + * @param Mask This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_MASK_TAMPER1 + * @arg @ref LL_RTC_TAMPER_MASK_TAMPER2 + * @arg @ref LL_RTC_TAMPER_MASK_TAMPER3 (*) + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_DisableMask(TAMP_TypeDef *TAMPx, uint32_t Mask) +{ + CLEAR_BIT(TAMPx->CR2, Mask); +} + +/** + * @brief Enable backup register erase after Tamper event detection + * @rmtoll TAMP_CR2 TAMP1NOERASE LL_RTC_TAMPER_EnableEraseBKP\n + * TAMP_CR2 TAMP2NOERASE LL_RTC_TAMPER_EnableEraseBKP\n + * TAMP_CR2 TAMP3NOERASE LL_RTC_TAMPER_EnableEraseBKP + * @param TAMPx TAMP Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER1 + * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER2 + * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER3 (*) + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_EnableEraseBKP(TAMP_TypeDef *TAMPx, uint32_t Tamper) +{ + CLEAR_BIT(TAMPx->CR2, Tamper); +} + +/** + * @brief Disable backup register erase after Tamper event detection + * @rmtoll TAMP_CR2 TAMP1NOERASE LL_RTC_TAMPER_DisableEraseBKP\n + * TAMP_CR2 TAMP2NOERASE LL_RTC_TAMPER_DisableEraseBKP\n + * TAMP_CR2 TAMP3NOERASE LL_RTC_TAMPER_DisableEraseBKP + * @param TAMPx TAMP Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER1 + * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER2 + * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER3 (*) + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_DisableEraseBKP(TAMP_TypeDef *TAMPx, uint32_t Tamper) +{ + SET_BIT(TAMPx->CR2, Tamper); +} + +/** + * @brief Disable RTC_TAMPx pull-up disable (Disable precharge of RTC_TAMPx pins) + * @rmtoll TAMP_FLTCR TAMPPUDIS LL_RTC_TAMPER_DisablePullUp + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_DisablePullUp(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->FLTCR, TAMP_FLTCR_TAMPPUDIS); +} + +/** + * @brief Enable RTC_TAMPx pull-up disable ( Precharge RTC_TAMPx pins before sampling) + * @rmtoll TAMP_FLTCR TAMPPUDIS LL_RTC_TAMPER_EnablePullUp + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_EnablePullUp(TAMP_TypeDef *TAMPx) +{ + CLEAR_BIT(TAMPx->FLTCR, TAMP_FLTCR_TAMPPUDIS); +} + +/** + * @brief Set RTC_TAMPx precharge duration + * @rmtoll TAMP_FLTCR TAMPPRCH LL_RTC_TAMPER_SetPrecharge + * @param TAMPx TAMP Instance + * @param Duration This parameter can be one of the following values: + * @arg @ref LL_RTC_TAMPER_DURATION_1RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_2RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_4RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_8RTCCLK + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_SetPrecharge(TAMP_TypeDef *TAMPx, uint32_t Duration) +{ + MODIFY_REG(TAMPx->FLTCR, TAMP_FLTCR_TAMPPRCH, Duration); +} + +/** + * @brief Get RTC_TAMPx precharge duration + * @rmtoll TAMP_FLTCR TAMPPRCH LL_RTC_TAMPER_GetPrecharge + * @param TAMPx TAMP Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TAMPER_DURATION_1RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_2RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_4RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_8RTCCLK + */ +__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetPrecharge(TAMP_TypeDef *TAMPx) +{ + return (uint32_t)(READ_BIT(TAMPx->FLTCR, TAMP_FLTCR_TAMPPRCH)); +} + +/** + * @brief Set RTC_TAMPx filter count + * @rmtoll TAMP_FLTCR TAMPFLT LL_RTC_TAMPER_SetFilterCount + * @param TAMPx TAMP Instance + * @param FilterCount This parameter can be one of the following values: + * @arg @ref LL_RTC_TAMPER_FILTER_DISABLE + * @arg @ref LL_RTC_TAMPER_FILTER_2SAMPLE + * @arg @ref LL_RTC_TAMPER_FILTER_4SAMPLE + * @arg @ref LL_RTC_TAMPER_FILTER_8SAMPLE + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_SetFilterCount(TAMP_TypeDef *TAMPx, uint32_t FilterCount) +{ + MODIFY_REG(TAMPx->FLTCR, TAMP_FLTCR_TAMPFLT, FilterCount); +} + +/** + * @brief Get RTC_TAMPx filter count + * @rmtoll TAMP_FLTCR TAMPFLT LL_RTC_TAMPER_GetFilterCount + * @param TAMPx TAMP Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TAMPER_FILTER_DISABLE + * @arg @ref LL_RTC_TAMPER_FILTER_2SAMPLE + * @arg @ref LL_RTC_TAMPER_FILTER_4SAMPLE + * @arg @ref LL_RTC_TAMPER_FILTER_8SAMPLE + */ +__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetFilterCount(TAMP_TypeDef *TAMPx) +{ + return (uint32_t)(READ_BIT(TAMPx->FLTCR, TAMP_FLTCR_TAMPFLT)); +} + +/** + * @brief Set Tamper sampling frequency + * @rmtoll TAMP_FLTCR TAMPFREQ LL_RTC_TAMPER_SetSamplingFreq + * @param TAMPx TAMP Instance + * @param SamplingFreq This parameter can be one of the following values: + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_32768 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_16384 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_8192 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_4096 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_2048 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_1024 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_512 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_256 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_SetSamplingFreq(TAMP_TypeDef *TAMPx, uint32_t SamplingFreq) +{ + MODIFY_REG(TAMPx->FLTCR, TAMP_FLTCR_TAMPFREQ, SamplingFreq); +} + +/** + * @brief Get Tamper sampling frequency + * @rmtoll TAMP_FLTCR TAMPFREQ LL_RTC_TAMPER_GetSamplingFreq + * @param TAMPx TAMP Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_32768 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_16384 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_8192 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_4096 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_2048 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_1024 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_512 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_256 + */ +__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetSamplingFreq(TAMP_TypeDef *TAMPx) +{ + return (uint32_t)(READ_BIT(TAMPx->FLTCR, TAMP_FLTCR_TAMPFREQ)); +} + +/** + * @brief Enable Active level for Tamper input + * @rmtoll TAMP_CR2 TAMP1TRG LL_RTC_TAMPER_EnableActiveLevel\n + * TAMP_CR2 TAMP2TRG LL_RTC_TAMPER_EnableActiveLevel\n + * TAMP_CR2 TAMP3TRG LL_RTC_TAMPER_EnableActiveLevel + * @param TAMPx TAMP Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP1 + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP2 + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP3 (*) + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_EnableActiveLevel(TAMP_TypeDef *TAMPx, uint32_t Tamper) +{ + SET_BIT(TAMPx->CR2, Tamper); +} + +/** + * @brief Disable Active level for Tamper input + * @rmtoll TAMP_CR2 TAMP1TRG LL_RTC_TAMPER_DisableActiveLevel\n + * TAMP_CR2 TAMP2TRG LL_RTC_TAMPER_DisableActiveLevel\n + * TAMP_CR2 TAMP3TRG LL_RTC_TAMPER_DisableActiveLevel + * @param TAMPx TAMP Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP1 + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP2 + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP3 (*) + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_DisableActiveLevel(TAMP_TypeDef *TAMPx, uint32_t Tamper) +{ + CLEAR_BIT(TAMPx->CR2, Tamper); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Internal_Tamper Internal Tamper + * @{ + */ + +/** + * @brief Enable internal tamper detection. + * @rmtoll TAMP_CR1 ITAMP3E LL_RTC_TAMPER_ITAMP_Enable\n + * TAMP_CR1 ITAMP4E LL_RTC_TAMPER_ITAMP_Enable\n + * TAMP_CR1 ITAMP5E LL_RTC_TAMPER_ITAMP_Enable\n + * TAMP_CR1 ITAMP6E LL_RTC_TAMPER_ITAMP_Enable\n + * @param TAMPx TAMP Instance + * @param InternalTamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_ITAMP3 + * @arg @ref LL_RTC_TAMPER_ITAMP4 + * @arg @ref LL_RTC_TAMPER_ITAMP5 + * @arg @ref LL_RTC_TAMPER_ITAMP6 + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_ITAMP_Enable(TAMP_TypeDef *TAMPx, uint32_t InternalTamper) +{ + SET_BIT(TAMPx->CR1, InternalTamper); +} + +/** + * @brief Disable internal tamper detection. + * @rmtoll TAMP_CR1 ITAMP3E LL_RTC_TAMPER_ITAMP_Disable\n + * TAMP_CR1 ITAMP4E LL_RTC_TAMPER_ITAMP_Disable\n + * TAMP_CR1 ITAMP5E LL_RTC_TAMPER_ITAMP_Disable\n + * TAMP_CR1 ITAMP6E LL_RTC_TAMPER_ITAMP_Disable\n + * @param TAMPx TAMP Instance + * @param InternalTamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_ITAMP3 + * @arg @ref LL_RTC_TAMPER_ITAMP4 + * @arg @ref LL_RTC_TAMPER_ITAMP5 + * @arg @ref LL_RTC_TAMPER_ITAMP6 + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_ITAMP_Disable(TAMP_TypeDef *TAMPx, uint32_t InternalTamper) +{ + CLEAR_BIT(TAMPx->CR1, InternalTamper); +} + +/** + * @} + */ + + +/** @defgroup RTC_LL_EF_Wakeup Wakeup + * @{ + */ + +/** + * @brief Enable Wakeup timer + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR WUTE LL_RTC_WAKEUP_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_WAKEUP_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_WUTE); +} + +/** + * @brief Disable Wakeup timer + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR WUTE LL_RTC_WAKEUP_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_WAKEUP_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_WUTE); +} + +/** + * @brief Check if Wakeup timer is enabled or not + * @rmtoll RTC_CR WUTE LL_RTC_WAKEUP_IsEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_WAKEUP_IsEnabled(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_WUTE) == (RTC_CR_WUTE)) ? 1UL : 0UL); +} + +/** + * @brief Select Wakeup clock + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when WUTE bit = 0 and WUTWF bit = 1 + * @rmtoll RTC_CR WUCKSEL LL_RTC_WAKEUP_SetClock + * @param RTCx RTC Instance + * @param WakeupClock This parameter can be one of the following values: + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_16 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_8 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_4 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_2 + * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE + * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE_WUT + * @retval None + */ +__STATIC_INLINE void LL_RTC_WAKEUP_SetClock(RTC_TypeDef *RTCx, uint32_t WakeupClock) +{ + MODIFY_REG(RTCx->CR, RTC_CR_WUCKSEL, WakeupClock); +} + +/** + * @brief Get Wakeup clock + * @rmtoll RTC_CR WUCKSEL LL_RTC_WAKEUP_GetClock + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_16 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_8 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_4 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_2 + * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE + * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE_WUT + */ +__STATIC_INLINE uint32_t LL_RTC_WAKEUP_GetClock(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_WUCKSEL)); +} + +/** + * @brief Set Wakeup auto-reload value + * @note Bit can be written only when WUTWF is set to 1 + * @rmtoll RTC_WUTR WUT LL_RTC_WAKEUP_SetAutoReload + * @param RTCx RTC Instance + * @param Value Value between Min_Data=0x00 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_WAKEUP_SetAutoReload(RTC_TypeDef *RTCx, uint32_t Value) +{ + MODIFY_REG(RTCx->WUTR, RTC_WUTR_WUT, Value); +} + +/** + * @brief Get Wakeup auto-reload value + * @rmtoll RTC_WUTR WUT LL_RTC_WAKEUP_GetAutoReload + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_WAKEUP_GetAutoReload(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->WUTR, RTC_WUTR_WUT)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Backup_Registers Backup_Registers + * @{ + */ + +/** + * @brief Writes a data in a specified Backup data register. + * @rmtoll TAMP_BKPxR BKP LL_RTC_BKP_SetRegister + * @param TAMPx RTC Instance + * @param BackupRegister This parameter can be one of the following values: + * @arg @ref LL_RTC_BKP_DR0 + * @arg @ref LL_RTC_BKP_DR1 + * @arg @ref LL_RTC_BKP_DR2 + * @arg @ref LL_RTC_BKP_DR3 + * @arg @ref LL_RTC_BKP_DR4 + * @param Data Value between Min_Data=0x00 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_BKP_SetRegister(TAMP_TypeDef *TAMPx, uint32_t BackupRegister, uint32_t Data) +{ + __IO uint32_t *tmp; + + tmp = &(TAMPx->BKP0R) + BackupRegister; + + /* Write the specified register */ + *tmp = Data; +} + +/** + * @brief Reads data from the specified RTC Backup data Register. + * @rmtoll TAMP_BKPxR BKP LL_RTC_BKP_GetRegister + * @param TAMPx RTC Instance + * @param BackupRegister This parameter can be one of the following values: + * @arg @ref LL_RTC_BKP_DR0 + * @arg @ref LL_RTC_BKP_DR1 + * @arg @ref LL_RTC_BKP_DR2 + * @arg @ref LL_RTC_BKP_DR3 + * @arg @ref LL_RTC_BKP_DR4 + * @retval Value between Min_Data=0x00 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_BKP_GetRegister(TAMP_TypeDef *TAMPx, uint32_t BackupRegister) +{ + const __IO uint32_t *tmp; + + tmp = &(TAMPx->BKP0R) + BackupRegister; + + /* Read the specified register */ + return *tmp; +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Calibration Calibration + * @{ + */ + +/** + * @brief Set Calibration output frequency (1 Hz or 512 Hz) + * @note Bits are write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR COE LL_RTC_CAL_SetOutputFreq\n + * RTC_CR COSEL LL_RTC_CAL_SetOutputFreq + * @param RTCx RTC Instance + * @param Frequency This parameter can be one of the following values: + * @arg @ref LL_RTC_CALIB_OUTPUT_NONE + * @arg @ref LL_RTC_CALIB_OUTPUT_1HZ + * @arg @ref LL_RTC_CALIB_OUTPUT_512HZ + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetOutputFreq(RTC_TypeDef *RTCx, uint32_t Frequency) +{ + MODIFY_REG(RTCx->CR, RTC_CR_COE | RTC_CR_COSEL, Frequency); +} + +/** + * @brief Get Calibration output frequency (1 Hz or 512 Hz) + * @rmtoll RTC_CR COE LL_RTC_CAL_GetOutputFreq\n + * RTC_CR COSEL LL_RTC_CAL_GetOutputFreq + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_CALIB_OUTPUT_NONE + * @arg @ref LL_RTC_CALIB_OUTPUT_1HZ + * @arg @ref LL_RTC_CALIB_OUTPUT_512HZ + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_GetOutputFreq(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_COE | RTC_CR_COSEL)); +} + +/** + * @brief Insert or not One RTCCLK pulse every 2exp11 pulses (frequency increased by 488.5 ppm) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RECALPF is set to 0 + * @rmtoll RTC_CALR CALP LL_RTC_CAL_SetPulse + * @param RTCx RTC Instance + * @param Pulse This parameter can be one of the following values: + * @arg @ref LL_RTC_CALIB_INSERTPULSE_NONE + * @arg @ref LL_RTC_CALIB_INSERTPULSE_SET + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetPulse(RTC_TypeDef *RTCx, uint32_t Pulse) +{ + MODIFY_REG(RTCx->CALR, RTC_CALR_CALP, Pulse); +} + +/** + * @brief Check if one RTCCLK has been inserted or not every 2exp11 pulses (frequency increased by 488.5 ppm) + * @rmtoll RTC_CALR CALP LL_RTC_CAL_IsPulseInserted + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_IsPulseInserted(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CALR, RTC_CALR_CALP) == (RTC_CALR_CALP)) ? 1UL : 0UL); +} + +/** + * @brief Set the calibration cycle period + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RECALPF is set to 0 + * @rmtoll RTC_CALR CALW8 LL_RTC_CAL_SetPeriod\n + * RTC_CALR CALW16 LL_RTC_CAL_SetPeriod + * @param RTCx RTC Instance + * @param Period This parameter can be one of the following values: + * @arg @ref LL_RTC_CALIB_PERIOD_32SEC + * @arg @ref LL_RTC_CALIB_PERIOD_16SEC + * @arg @ref LL_RTC_CALIB_PERIOD_8SEC + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetPeriod(RTC_TypeDef *RTCx, uint32_t Period) +{ + MODIFY_REG(RTCx->CALR, RTC_CALR_CALW8 | RTC_CALR_CALW16, Period); +} + +/** + * @brief Get the calibration cycle period + * @rmtoll RTC_CALR CALW8 LL_RTC_CAL_GetPeriod\n + * RTC_CALR CALW16 LL_RTC_CAL_GetPeriod + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_CALIB_PERIOD_32SEC + * @arg @ref LL_RTC_CALIB_PERIOD_16SEC + * @arg @ref LL_RTC_CALIB_PERIOD_8SEC + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_GetPeriod(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CALR, RTC_CALR_CALW8 | RTC_CALR_CALW16)); +} + +/** + * @brief Set Calibration minus + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RECALPF is set to 0 + * @rmtoll RTC_CALR CALM LL_RTC_CAL_SetMinus + * @param RTCx RTC Instance + * @param CalibMinus Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetMinus(RTC_TypeDef *RTCx, uint32_t CalibMinus) +{ + MODIFY_REG(RTCx->CALR, RTC_CALR_CALM, CalibMinus); +} + +/** + * @brief Get Calibration minus + * @rmtoll RTC_CALR CALM LL_RTC_CAL_GetMinus + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data= 0x1FF + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_GetMinus(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CALR, RTC_CALR_CALM)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Internal Time-stamp flag + * @rmtoll RTC_SR ITSF LL_RTC_IsActiveFlag_ITS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITS(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_ITSF) == (RTC_SR_ITSF)) ? 1UL : 0UL); +} + +/** + * @brief Get Recalibration pending Flag + * @rmtoll RTC_ICSR RECALPF LL_RTC_IsActiveFlag_RECALP + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RECALP(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_RECALPF) == (RTC_ICSR_RECALPF)) ? 1UL : 0UL); +} + +/** + * @brief Get Time-stamp overflow flag + * @rmtoll RTC_SR TSOVF LL_RTC_IsActiveFlag_TSOV + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TSOV(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_TSOVF) == (RTC_SR_TSOVF)) ? 1UL : 0UL); +} + +/** + * @brief Get Time-stamp flag + * @rmtoll RTC_SR TSF LL_RTC_IsActiveFlag_TS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TS(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_TSF) == (RTC_SR_TSF)) ? 1UL : 0UL); +} + +/** + * @brief Get Wakeup timer flag + * @rmtoll RTC_SR WUTF LL_RTC_IsActiveFlag_WUT + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_WUT(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_WUTF) == (RTC_SR_WUTF)) ? 1UL : 0UL); +} + +/** + * @brief Get Alarm B flag + * @rmtoll RTC_SR ALRBF LL_RTC_IsActiveFlag_ALRB + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRB(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_ALRBF) == (RTC_SR_ALRBF)) ? 1UL : 0UL); +} + +/** + * @brief Get Alarm A flag + * @rmtoll RTC_SR ALRAF LL_RTC_IsActiveFlag_ALRA + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRA(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_ALRAF) == (RTC_SR_ALRAF)) ? 1UL : 0UL); +} + +/** + * @brief Clear Internal Time-stamp flag + * @rmtoll RTC_SCR CITSF LL_RTC_ClearFlag_ITS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITS(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->SCR, RTC_SCR_CITSF); +} + +/** + * @brief Clear Time-stamp overflow flag + * @rmtoll RTC_SCR CTSOVF LL_RTC_ClearFlag_TSOV + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TSOV(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->SCR, RTC_SCR_CTSOVF); +} + +/** + * @brief Clear Time-stamp flag + * @rmtoll RTC_SCR CTSF LL_RTC_ClearFlag_TS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TS(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->SCR, RTC_SCR_CTSF); +} + +/** + * @brief Clear Wakeup timer flag + * @rmtoll RTC_SCR CWUTF LL_RTC_ClearFlag_WUT + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_WUT(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->SCR, RTC_SCR_CWUTF); +} + +/** + * @brief Clear Alarm B flag + * @rmtoll RTC_SCR CALRBF LL_RTC_ClearFlag_ALRB + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ALRB(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->SCR, RTC_SCR_CALRBF); +} + +/** + * @brief Clear Alarm A flag + * @rmtoll RTC_SCR CALRAF LL_RTC_ClearFlag_ALRA + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ALRA(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->SCR, RTC_SCR_CALRAF); +} + +/** + * @brief Get Initialization flag + * @rmtoll RTC_ICSR INITF LL_RTC_IsActiveFlag_INIT + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_INIT(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_INITF) == (RTC_ICSR_INITF)) ? 1UL : 0UL); +} + +/** + * @brief Get Registers synchronization flag + * @rmtoll RTC_ICSR RSF LL_RTC_IsActiveFlag_RS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RS(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_RSF) == (RTC_ICSR_RSF)) ? 1UL : 0UL); +} + +/** + * @brief Clear Registers synchronization flag + * @rmtoll RTC_ICSR RSF LL_RTC_ClearFlag_RS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_RS(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->ICSR, (~((RTC_ICSR_RSF | RTC_ICSR_INIT) & 0x000000FFU) | (RTCx->ICSR & RTC_ICSR_INIT))); +} + +/** + * @brief Get Initialization status flag + * @rmtoll RTC_ICSR INITS LL_RTC_IsActiveFlag_INITS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_INITS(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_INITS) == (RTC_ICSR_INITS)) ? 1UL : 0UL); +} + +/** + * @brief Get Shift operation pending flag + * @rmtoll RTC_ICSR SHPF LL_RTC_IsActiveFlag_SHP + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_SHP(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_SHPF) == (RTC_ICSR_SHPF)) ? 1UL : 0UL); +} + +/** + * @brief Get Wakeup timer write flag + * @rmtoll RTC_ICSR WUTWF LL_RTC_IsActiveFlag_WUTW + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_WUTW(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_WUTWF) == (RTC_ICSR_WUTWF)) ? 1UL : 0UL); +} + +/** + * @brief Get Alarm B write flag + * @rmtoll RTC_ICSR ALRBWF LL_RTC_IsActiveFlag_ALRBW + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRBW(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_ALRBWF) == (RTC_ICSR_ALRBWF)) ? 1UL : 0UL); +} + +/** + * @brief Get Alarm A write flag + * @rmtoll RTC_ICSR ALRAWF LL_RTC_IsActiveFlag_ALRAW + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRAW(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_ALRAWF) == (RTC_ICSR_ALRAWF)) ? 1UL : 0UL); +} + +/** + * @brief Get Alarm A masked flag. + * @rmtoll RTC_MISR ALRAMF LL_RTC_IsActiveFlag_ALRAM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRAM(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_ALRAMF) == (RTC_MISR_ALRAMF)) ? 1UL : 0UL); +} + +/** + * @brief Get Alarm B masked flag. + * @rmtoll RTC_MISR ALRBMF LL_RTC_IsActiveFlag_ALRBM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRBM(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_ALRBMF) == (RTC_MISR_ALRBMF)) ? 1UL : 0UL); +} + +/** + * @brief Get Wakeup timer masked flag. + * @rmtoll RTC_MISR WUTMF LL_RTC_IsActiveFlag_WUTM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_WUTM(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_WUTMF) == (RTC_MISR_WUTMF)) ? 1UL : 0UL); +} + +/** + * @brief Get Time-stamp masked flag. + * @rmtoll RTC_MISR TSMF LL_RTC_IsActiveFlag_TSM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TSM(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_TSMF) == (RTC_MISR_TSMF)) ? 1UL : 0UL); +} + +/** + * @brief Get Time-stamp overflow masked flag. + * @rmtoll RTC_MISR TSOVMF LL_RTC_IsActiveFlag_TSOVM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TSOVM(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_TSOVMF) == (RTC_MISR_TSOVMF)) ? 1UL : 0UL); +} + +/** + * @brief Get Internal Time-stamp masked flag. + * @rmtoll RTC_MISR ITSMF LL_RTC_IsActiveFlag_ITSM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITSM(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_ITSMF) == (RTC_MISR_ITSMF)) ? 1UL : 0UL); +} + +/** + * @brief Get tamper 1 detection flag. + * @rmtoll TAMP_SR TAMP1F LL_RTC_IsActiveFlag_TAMP1 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP1(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->SR, TAMP_SR_TAMP1F) == (TAMP_SR_TAMP1F)) ? 1UL : 0UL); +} + +/** + * @brief Get tamper 2 detection flag. + * @rmtoll TAMP_SR TAMP2F LL_RTC_IsActiveFlag_TAMP2 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP2(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->SR, TAMP_SR_TAMP2F) == (TAMP_SR_TAMP2F)) ? 1UL : 0UL); +} + +#if defined (TAMP_CR1_TAMP3E) +/** + * @brief Get tamper 3 detection flag. + * @rmtoll TAMP_SR TAMP3F LL_RTC_IsActiveFlag_TAMP3 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP3(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->SR, TAMP_SR_TAMP3F) == (TAMP_SR_TAMP3F)) ? 1UL : 0UL); +} +#endif /* TAMP_CR1_TAMP3E */ +/** + * @brief Get internal tamper 3 detection flag. + * @rmtoll TAMP_SR ITAMP3F LL_RTC_IsActiveFlag_ITAMP3 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP3(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->SR, TAMP_SR_ITAMP3F) == (TAMP_SR_ITAMP3F)) ? 1UL : 0UL); +} + +/** + * @brief Get internal tamper 4 detection flag. + * @rmtoll TAMP_SR ITAMP3F LL_RTC_IsActiveFlag_ITAMP4 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP4(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->SR, TAMP_SR_ITAMP4F) == (TAMP_SR_ITAMP4F)) ? 1UL : 0UL); +} + +/** + * @brief Get internal tamper 5 detection flag. + * @rmtoll TAMP_SR ITAMP5F LL_RTC_IsActiveFlag_ITAMP5 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP5(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->SR, TAMP_SR_ITAMP5F) == (TAMP_SR_ITAMP5F)) ? 1UL : 0UL); +} + +/** + * @brief Get internal tamper 6 detection flag. + * @rmtoll TAMP_SR ITAMP6F LL_RTC_IsActiveFlag_ITAMP6 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP6(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->SR, TAMP_SR_ITAMP6F) == (TAMP_SR_ITAMP6F)) ? 1UL : 0UL); +} + + +/** + * @brief Get tamper 1 interrupt masked flag. + * @rmtoll TAMP_MISR TAMP1MF LL_RTC_IsActiveFlag_TAMP1M + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP1M(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->MISR, TAMP_MISR_TAMP1MF) == (TAMP_MISR_TAMP1MF)) ? 1UL : 0UL); +} + +/** + * @brief Get tamper 2 interrupt masked flag. + * @rmtoll TAMP_MISR TAMP2MF LL_RTC_IsActiveFlag_TAMP2M + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP2M(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->MISR, TAMP_MISR_TAMP2MF) == (TAMP_MISR_TAMP2MF)) ? 1UL : 0UL); +} + +#if defined (TAMP_CR1_TAMP3E) +/** + * @brief Get tamper 3 interrupt masked flag. + * @rmtoll TAMP_MISR TAMP3MF LL_RTC_IsActiveFlag_TAMP3M + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP3M(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->MISR, TAMP_MISR_TAMP3MF) == (TAMP_MISR_TAMP3MF)) ? 1UL : 0UL); +} +#endif /* TAMP_CR1_TAMP3E */ + +/** + * @brief Get internal tamper 3 interrupt masked flag. + * @rmtoll TAMP_MISR ITAMP3MF LL_RTC_IsActiveFlag_ITAMP3M + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP3M(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->MISR, TAMP_MISR_ITAMP3MF) == (TAMP_MISR_ITAMP3MF)) ? 1UL : 0UL); +} + +/** + * @brief Get internal tamper 4 interrupt masked flag. + * @rmtoll TAMP_MISR ITAMP4MF LL_RTC_IsActiveFlag_ITAMP4M + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP4M(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->MISR, TAMP_MISR_ITAMP4MF) == (TAMP_MISR_ITAMP4MF)) ? 1UL : 0UL); +} + +/** + * @brief Get internal tamper 5 interrupt masked flag. + * @rmtoll TAMP_MISR ITAMP5MF LL_RTC_IsActiveFlag_ITAMP5M + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP5M(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->MISR, TAMP_MISR_ITAMP5MF) == (TAMP_MISR_ITAMP5MF)) ? 1UL : 0UL); +} + +/** + * @brief Get internal tamper 6 interrupt masked flag. + * @rmtoll TAMP_MISR ITAMP6MF LL_RTC_IsActiveFlag_ITAMP6M + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP6M(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->MISR, TAMP_MISR_ITAMP6MF) == (TAMP_MISR_ITAMP6MF)) ? 1UL : 0UL); +} + + +/** + * @brief Clear tamper 1 detection flag. + * @rmtoll TAMP_SCR CTAMP1F LL_RTC_ClearFlag_TAMP1 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TAMP1(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->SCR, TAMP_SCR_CTAMP1F); +} + +/** + * @brief Clear tamper 2 detection flag. + * @rmtoll TAMP_SCR CTAMP2F LL_RTC_ClearFlag_TAMP2 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TAMP2(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->SCR, TAMP_SCR_CTAMP2F); +} + +#if defined (TAMP_CR1_TAMP3E) +/** + * @brief Clear tamper 3 detection flag. + * @rmtoll TAMP_SCR CTAMP3F LL_RTC_ClearFlag_TAMP3 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TAMP3(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->SCR, TAMP_SCR_CTAMP3F); +} +#endif /* TAMP_CR1_TAMP3E */ + +/** + * @brief Clear internal tamper 3 detection flag. + * @rmtoll TAMP_SCR CITAMP3F LL_RTC_ClearFlag_ITAMP3 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITAMP3(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->SCR, TAMP_SCR_CITAMP3F); +} + +/** + * @brief Clear internal tamper 4 detection flag. + * @rmtoll TAMP_SCR CITAMP4F LL_RTC_ClearFlag_ITAMP4 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITAMP4(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->SCR, TAMP_SCR_CITAMP4F); +} + +/** + * @brief Clear internal tamper 5 detection flag. + * @rmtoll TAMP_SCR CITAMP5F LL_RTC_ClearFlag_ITAMP5 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITAMP5(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->SCR, TAMP_SCR_CITAMP5F); +} + +/** + * @brief Clear internal tamper 6 detection flag. + * @rmtoll TAMP_SCR CITAMP6F LL_RTC_ClearFlag_ITAMP6 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITAMP6(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->SCR, TAMP_SCR_CITAMP6F); +} + + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable Time-stamp interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR TSIE LL_RTC_EnableIT_TS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TS(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TSIE); +} + +/** + * @brief Disable Time-stamp interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR TSIE LL_RTC_DisableIT_TS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TS(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TSIE); +} + +/** + * @brief Enable Wakeup timer interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR WUTIE LL_RTC_EnableIT_WUT + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_WUT(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_WUTIE); +} + +/** + * @brief Disable Wakeup timer interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR WUTIE LL_RTC_DisableIT_WUT + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_WUT(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_WUTIE); +} + +/** + * @brief Enable Alarm B interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRBIE LL_RTC_EnableIT_ALRB + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ALRB(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ALRBIE); +} + +/** + * @brief Disable Alarm B interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRBIE LL_RTC_DisableIT_ALRB + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ALRB(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ALRBIE); +} + +/** + * @brief Enable Alarm A interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRAIE LL_RTC_EnableIT_ALRA + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ALRA(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ALRAIE); +} + +/** + * @brief Disable Alarm A interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRAIE LL_RTC_DisableIT_ALRA + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ALRA(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ALRAIE); +} + +/** + * @brief Check if Time-stamp interrupt is enabled or not + * @rmtoll RTC_CR TSIE LL_RTC_IsEnabledIT_TS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TS(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_TSIE) == (RTC_CR_TSIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Wakeup timer interrupt is enabled or not + * @rmtoll RTC_CR WUTIE LL_RTC_IsEnabledIT_WUT + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_WUT(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_WUTIE) == (RTC_CR_WUTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Alarm B interrupt is enabled or not + * @rmtoll RTC_CR ALRBIE LL_RTC_IsEnabledIT_ALRB + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ALRB(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_ALRBIE) == (RTC_CR_ALRBIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Alarm A interrupt is enabled or not + * @rmtoll RTC_CR ALRAIE LL_RTC_IsEnabledIT_ALRA + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ALRA(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_ALRAIE) == (RTC_CR_ALRAIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable tamper 1 interrupt. + * @rmtoll TAMP_IER TAMP1IE LL_RTC_EnableIT_TAMP1 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TAMP1(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->IER, TAMP_IER_TAMP1IE); +} + +/** + * @brief Disable tamper 1 interrupt. + * @rmtoll TAMP_IER TAMP1IE LL_RTC_DisableIT_TAMP1 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TAMP1(TAMP_TypeDef *TAMPx) +{ + CLEAR_BIT(TAMPx->IER, TAMP_IER_TAMP1IE); +} + +/** + * @brief Enable tamper 2 interrupt. + * @rmtoll TAMP_IER TAMP2IE LL_RTC_EnableIT_TAMP2 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TAMP2(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->IER, TAMP_IER_TAMP2IE); +} + +/** + * @brief Disable tamper 2 interrupt. + * @rmtoll TAMP_IER TAMP2IE LL_RTC_DisableIT_TAMP2 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TAMP2(TAMP_TypeDef *TAMPx) +{ + CLEAR_BIT(TAMPx->IER, TAMP_IER_TAMP2IE); +} + +#if defined (TAMP_CR1_TAMP3E) +/** + * @brief Enable tamper 3 interrupt. + * @rmtoll TAMP_IER TAMP3IE LL_RTC_EnableIT_TAMP3 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TAMP3(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->IER, TAMP_IER_TAMP3IE); +} + +/** + * @brief Disable tamper 3 interrupt. + * @rmtoll TAMP_IER TAMP3IE LL_RTC_DisableIT_TAMP3 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TAMP3(TAMP_TypeDef *TAMPx) +{ + CLEAR_BIT(TAMPx->IER, TAMP_IER_TAMP3IE); +} +#endif /* TAMP_CR1_TAMP3E */ + +/** + * @brief Enable internal tamper 3 interrupt. + * @rmtoll TAMP_IER ITAMP3IE LL_RTC_EnableIT_ITAMP3 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ITAMP3(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->IER, TAMP_IER_ITAMP3IE); +} + +/** + * @brief Disable internal tamper 3 interrupt. + * @rmtoll TAMP_IER ITAMP3IE LL_RTC_DisableIT_ITAMP3 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ITAMP3(TAMP_TypeDef *TAMPx) +{ + CLEAR_BIT(TAMPx->IER, TAMP_IER_ITAMP3IE); +} + +/** + * @brief Enable internal tamper 4 interrupt. + * @rmtoll TAMP_IER ITAMP4IE LL_RTC_EnableIT_ITAMP4 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ITAMP4(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->IER, TAMP_IER_ITAMP4IE); +} + +/** + * @brief Disable internal tamper 4 interrupt. + * @rmtoll TAMP_IER ITAMP4IE LL_RTC_DisableIT_ITAMP4 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ITAMP4(TAMP_TypeDef *TAMPx) +{ + CLEAR_BIT(TAMPx->IER, TAMP_IER_ITAMP4IE); +} + +/** + * @brief Enable internal tamper 5 interrupt. + * @rmtoll TAMP_IER ITAMP5IE LL_RTC_EnableIT_ITAMP5 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ITAMP5(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->IER, TAMP_IER_ITAMP5IE); +} + +/** + * @brief Disable internal tamper 5 interrupt. + * @rmtoll TAMP_IER ITAMP5IE LL_RTC_DisableIT_ITAMP5 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ITAMP5(TAMP_TypeDef *TAMPx) +{ + CLEAR_BIT(TAMPx->IER, TAMP_IER_ITAMP5IE); +} + +/** + * @brief Enable internal tamper 6 interrupt. + * @rmtoll TAMP_IER ITAMP6IE LL_RTC_EnableIT_ITAMP6 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ITAMP6(TAMP_TypeDef *TAMPx) +{ + SET_BIT(TAMPx->IER, TAMP_IER_ITAMP6IE); +} + +/** + * @brief Disable internal tamper 6 interrupt. + * @rmtoll TAMP_IER ITAMP6IE LL_RTC_DisableIT_ITAMP6 + * @param TAMPx TAMP Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ITAMP6(TAMP_TypeDef *TAMPx) +{ + CLEAR_BIT(TAMPx->IER, TAMP_IER_ITAMP6IE); +} + + +/** + * @brief Check if tamper 1 interrupt is enabled or not. + * @rmtoll TAMP_IER TAMP1IE LL_RTC_IsEnabledIT_TAMP1 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TAMP1(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->IER, TAMP_IER_TAMP1IE) == (TAMP_IER_TAMP1IE)) ? 1UL : 0UL); +} + +/** + * @brief Check if tamper 2 interrupt is enabled or not. + * @rmtoll TAMP_IER TAMP2IE LL_RTC_IsEnabledIT_TAMP2 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TAMP2(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->IER, TAMP_IER_TAMP2IE) == (TAMP_IER_TAMP2IE)) ? 1UL : 0UL); +} + +#if defined (TAMP_CR1_TAMP3E) +/** + * @brief Check if tamper 3 interrupt is enabled or not. + * @rmtoll TAMP_IER TAMP3IE LL_RTC_IsEnabledIT_TAMP3 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TAMP3(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->IER, TAMP_IER_TAMP3IE) == (TAMP_IER_TAMP3IE)) ? 1UL : 0UL); +} +#endif /* TAMP_CR1_TAMP3E */ + +/** + * @brief Check if internal tamper 3 interrupt is enabled or not. + * @rmtoll TAMP_IER ITAMP3IE LL_RTC_IsEnabledIT_ITAMP3 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ITAMP3(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->IER, TAMP_IER_ITAMP3IE) == (TAMP_IER_ITAMP3IE)) ? 1UL : 0UL); +} + +/** + * @brief Check if internal tamper 4 interrupt is enabled or not. + * @rmtoll TAMP_IER ITAMP4IE LL_RTC_IsEnabledIT_ITAMP4 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ITAMP4(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->IER, TAMP_IER_ITAMP4IE) == (TAMP_IER_ITAMP4IE)) ? 1UL : 0UL); +} + +/** + * @brief Check if internal tamper 5 interrupt is enabled or not. + * @rmtoll TAMP_IER ITAMP5IE LL_RTC_IsEnabledIT_ITAMP5 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ITAMP5(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->IER, TAMP_IER_ITAMP5IE) == (TAMP_IER_ITAMP5IE)) ? 1UL : 0UL); +} + +/** + * @brief Check if internal tamper 6 interrupt is enabled or not. + * @rmtoll TAMP_IER ITAMP6IE LL_RTC_IsEnabledIT_ITAMP6 + * @param TAMPx TAMP Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ITAMP6(TAMP_TypeDef *TAMPx) +{ + return ((READ_BIT(TAMPx->IER, TAMP_IER_ITAMP6IE) == (TAMP_IER_ITAMP6IE)) ? 1UL : 0UL); +} + + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_RTC_DeInit(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_Init(RTC_TypeDef *RTCx, LL_RTC_InitTypeDef *RTC_InitStruct); +void LL_RTC_StructInit(LL_RTC_InitTypeDef *RTC_InitStruct); +ErrorStatus LL_RTC_TIME_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_TimeTypeDef *RTC_TimeStruct); +void LL_RTC_TIME_StructInit(LL_RTC_TimeTypeDef *RTC_TimeStruct); +ErrorStatus LL_RTC_DATE_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_DateTypeDef *RTC_DateStruct); +void LL_RTC_DATE_StructInit(LL_RTC_DateTypeDef *RTC_DateStruct); +ErrorStatus LL_RTC_ALMA_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +ErrorStatus LL_RTC_ALMB_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +void LL_RTC_ALMA_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +void LL_RTC_ALMB_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +ErrorStatus LL_RTC_EnterInitMode(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_ExitInitMode(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_WaitForSynchro(RTC_TypeDef *RTCx); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RTC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_RTC_H */ + + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_spi.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_spi.h new file mode 100644 index 0000000..9643b57 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_spi.h @@ -0,0 +1,2284 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_spi.h + * @author MCD Application Team + * @brief Header file of SPI LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_SPI_H +#define STM32G0xx_LL_SPI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (SPI1) || defined (SPI2) || defined (SPI3) + +/** @defgroup SPI_LL SPI + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup SPI_LL_ES_INIT SPI Exported Init structure + * @{ + */ + +/** + * @brief SPI Init structures definition + */ +typedef struct +{ + uint32_t TransferDirection; /*!< Specifies the SPI unidirectional or bidirectional data mode. + This parameter can be a value of @ref SPI_LL_EC_TRANSFER_MODE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetTransferDirection().*/ + + uint32_t Mode; /*!< Specifies the SPI mode (Master/Slave). + This parameter can be a value of @ref SPI_LL_EC_MODE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetMode().*/ + + uint32_t DataWidth; /*!< Specifies the SPI data width. + This parameter can be a value of @ref SPI_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetDataWidth().*/ + + uint32_t ClockPolarity; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_LL_EC_POLARITY. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetClockPolarity().*/ + + uint32_t ClockPhase; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_LL_EC_PHASE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetClockPhase().*/ + + uint32_t NSS; /*!< Specifies whether the NSS signal is managed by hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_LL_EC_NSS_MODE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetNSSMode().*/ + + uint32_t BaudRate; /*!< Specifies the BaudRate prescaler value which will be used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_LL_EC_BAUDRATEPRESCALER. + @note The communication clock is derived from the master clock. The slave clock does not need to be set. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetBaudRatePrescaler().*/ + + uint32_t BitOrder; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_LL_EC_BIT_ORDER. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetTransferBitOrder().*/ + + uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not. + This parameter can be a value of @ref SPI_LL_EC_CRC_CALCULATION. + + This feature can be modified afterwards using unitary functions @ref LL_SPI_EnableCRC() and @ref LL_SPI_DisableCRC().*/ + + uint32_t CRCPoly; /*!< Specifies the polynomial used for the CRC calculation. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFF. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetCRCPolynomial().*/ + +} LL_SPI_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SPI_LL_Exported_Constants SPI Exported Constants + * @{ + */ + +/** @defgroup SPI_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_SPI_ReadReg function + * @{ + */ +#define LL_SPI_SR_RXNE SPI_SR_RXNE /*!< Rx buffer not empty flag */ +#define LL_SPI_SR_TXE SPI_SR_TXE /*!< Tx buffer empty flag */ +#define LL_SPI_SR_BSY SPI_SR_BSY /*!< Busy flag */ +#define LL_SPI_SR_CRCERR SPI_SR_CRCERR /*!< CRC error flag */ +#define LL_SPI_SR_MODF SPI_SR_MODF /*!< Mode fault flag */ +#define LL_SPI_SR_OVR SPI_SR_OVR /*!< Overrun flag */ +#define LL_SPI_SR_FRE SPI_SR_FRE /*!< TI mode frame format error flag */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_SPI_ReadReg and LL_SPI_WriteReg functions + * @{ + */ +#define LL_SPI_CR2_RXNEIE SPI_CR2_RXNEIE /*!< Rx buffer not empty interrupt enable */ +#define LL_SPI_CR2_TXEIE SPI_CR2_TXEIE /*!< Tx buffer empty interrupt enable */ +#define LL_SPI_CR2_ERRIE SPI_CR2_ERRIE /*!< Error interrupt enable */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_MODE Operation Mode + * @{ + */ +#define LL_SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI) /*!< Master configuration */ +#define LL_SPI_MODE_SLAVE 0x00000000U /*!< Slave configuration */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_PROTOCOL Serial Protocol + * @{ + */ +#define LL_SPI_PROTOCOL_MOTOROLA 0x00000000U /*!< Motorola mode. Used as default value */ +#define LL_SPI_PROTOCOL_TI (SPI_CR2_FRF) /*!< TI mode */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_PHASE Clock Phase + * @{ + */ +#define LL_SPI_PHASE_1EDGE 0x00000000U /*!< First clock transition is the first data capture edge */ +#define LL_SPI_PHASE_2EDGE (SPI_CR1_CPHA) /*!< Second clock transition is the first data capture edge */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_SPI_POLARITY_LOW 0x00000000U /*!< Clock to 0 when idle */ +#define LL_SPI_POLARITY_HIGH (SPI_CR1_CPOL) /*!< Clock to 1 when idle */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_BAUDRATEPRESCALER Baud Rate Prescaler + * @{ + */ +#define LL_SPI_BAUDRATEPRESCALER_DIV2 0x00000000U /*!< BaudRate control equal to fPCLK/2 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV4 (SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/4 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV8 (SPI_CR1_BR_1) /*!< BaudRate control equal to fPCLK/8 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV16 (SPI_CR1_BR_1 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/16 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV32 (SPI_CR1_BR_2) /*!< BaudRate control equal to fPCLK/32 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV64 (SPI_CR1_BR_2 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/64 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV128 (SPI_CR1_BR_2 | SPI_CR1_BR_1) /*!< BaudRate control equal to fPCLK/128 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/256 */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_BIT_ORDER Transmission Bit Order + * @{ + */ +#define LL_SPI_LSB_FIRST (SPI_CR1_LSBFIRST) /*!< Data is transmitted/received with the LSB first */ +#define LL_SPI_MSB_FIRST 0x00000000U /*!< Data is transmitted/received with the MSB first */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_TRANSFER_MODE Transfer Mode + * @{ + */ +#define LL_SPI_FULL_DUPLEX 0x00000000U /*!< Full-Duplex mode. Rx and Tx transfer on 2 lines */ +#define LL_SPI_SIMPLEX_RX (SPI_CR1_RXONLY) /*!< Simplex Rx mode. Rx transfer only on 1 line */ +#define LL_SPI_HALF_DUPLEX_RX (SPI_CR1_BIDIMODE) /*!< Half-Duplex Rx mode. Rx transfer on 1 line */ +#define LL_SPI_HALF_DUPLEX_TX (SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE) /*!< Half-Duplex Tx mode. Tx transfer on 1 line */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_NSS_MODE Slave Select Pin Mode + * @{ + */ +#define LL_SPI_NSS_SOFT (SPI_CR1_SSM) /*!< NSS managed internally. NSS pin not used and free */ +#define LL_SPI_NSS_HARD_INPUT 0x00000000U /*!< NSS pin used in Input. Only used in Master mode */ +#define LL_SPI_NSS_HARD_OUTPUT (((uint32_t)SPI_CR2_SSOE << 16U)) /*!< NSS pin used in Output. Only used in Slave mode as chip select */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_SPI_DATAWIDTH_4BIT (SPI_CR2_DS_0 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 4 bits */ +#define LL_SPI_DATAWIDTH_5BIT (SPI_CR2_DS_2) /*!< Data length for SPI transfer: 5 bits */ +#define LL_SPI_DATAWIDTH_6BIT (SPI_CR2_DS_2 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 6 bits */ +#define LL_SPI_DATAWIDTH_7BIT (SPI_CR2_DS_2 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 7 bits */ +#define LL_SPI_DATAWIDTH_8BIT (SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 8 bits */ +#define LL_SPI_DATAWIDTH_9BIT (SPI_CR2_DS_3) /*!< Data length for SPI transfer: 9 bits */ +#define LL_SPI_DATAWIDTH_10BIT (SPI_CR2_DS_3 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 10 bits */ +#define LL_SPI_DATAWIDTH_11BIT (SPI_CR2_DS_3 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 11 bits */ +#define LL_SPI_DATAWIDTH_12BIT (SPI_CR2_DS_3 | SPI_CR2_DS_1 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 12 bits */ +#define LL_SPI_DATAWIDTH_13BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2) /*!< Data length for SPI transfer: 13 bits */ +#define LL_SPI_DATAWIDTH_14BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 14 bits */ +#define LL_SPI_DATAWIDTH_15BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 15 bits */ +#define LL_SPI_DATAWIDTH_16BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 16 bits */ +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup SPI_LL_EC_CRC_CALCULATION CRC Calculation + * @{ + */ +#define LL_SPI_CRCCALCULATION_DISABLE 0x00000000U /*!< CRC calculation disabled */ +#define LL_SPI_CRCCALCULATION_ENABLE (SPI_CR1_CRCEN) /*!< CRC calculation enabled */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup SPI_LL_EC_CRC_LENGTH CRC Length + * @{ + */ +#define LL_SPI_CRC_8BIT 0x00000000U /*!< 8-bit CRC length */ +#define LL_SPI_CRC_16BIT (SPI_CR1_CRCL) /*!< 16-bit CRC length */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_RX_FIFO_TH RX FIFO Threshold + * @{ + */ +#define LL_SPI_RX_FIFO_TH_HALF 0x00000000U /*!< RXNE event is generated if FIFO level is greater than or equal to 1/2 (16-bit) */ +#define LL_SPI_RX_FIFO_TH_QUARTER (SPI_CR2_FRXTH) /*!< RXNE event is generated if FIFO level is greater than or equal to 1/4 (8-bit) */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_RX_FIFO RX FIFO Level + * @{ + */ +#define LL_SPI_RX_FIFO_EMPTY 0x00000000U /*!< FIFO reception empty */ +#define LL_SPI_RX_FIFO_QUARTER_FULL (SPI_SR_FRLVL_0) /*!< FIFO reception 1/4 */ +#define LL_SPI_RX_FIFO_HALF_FULL (SPI_SR_FRLVL_1) /*!< FIFO reception 1/2 */ +#define LL_SPI_RX_FIFO_FULL (SPI_SR_FRLVL_1 | SPI_SR_FRLVL_0) /*!< FIFO reception full */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_TX_FIFO TX FIFO Level + * @{ + */ +#define LL_SPI_TX_FIFO_EMPTY 0x00000000U /*!< FIFO transmission empty */ +#define LL_SPI_TX_FIFO_QUARTER_FULL (SPI_SR_FTLVL_0) /*!< FIFO transmission 1/4 */ +#define LL_SPI_TX_FIFO_HALF_FULL (SPI_SR_FTLVL_1) /*!< FIFO transmission 1/2 */ +#define LL_SPI_TX_FIFO_FULL (SPI_SR_FTLVL_1 | SPI_SR_FTLVL_0) /*!< FIFO transmission full */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_DMA_PARITY DMA Parity + * @{ + */ +#define LL_SPI_DMA_PARITY_EVEN 0x00000000U /*!< Select DMA parity Even */ +#define LL_SPI_DMA_PARITY_ODD 0x00000001U /*!< Select DMA parity Odd */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SPI_LL_Exported_Macros SPI Exported Macros + * @{ + */ + +/** @defgroup SPI_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in SPI register + * @param __INSTANCE__ SPI Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_SPI_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in SPI register + * @param __INSTANCE__ SPI Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_SPI_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SPI_LL_Exported_Functions SPI Exported Functions + * @{ + */ + +/** @defgroup SPI_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable SPI peripheral + * @rmtoll CR1 SPE LL_SPI_Enable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_Enable(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_SPE); +} + +/** + * @brief Disable SPI peripheral + * @note When disabling the SPI, follow the procedure described in the Reference Manual. + * @rmtoll CR1 SPE LL_SPI_Disable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_Disable(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR1, SPI_CR1_SPE); +} + +/** + * @brief Check if SPI peripheral is enabled + * @rmtoll CR1 SPE LL_SPI_IsEnabled + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabled(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR1, SPI_CR1_SPE) == (SPI_CR1_SPE)) ? 1UL : 0UL); +} + +/** + * @brief Set SPI operation mode to Master or Slave + * @note This bit should not be changed when communication is ongoing. + * @rmtoll CR1 MSTR LL_SPI_SetMode\n + * CR1 SSI LL_SPI_SetMode + * @param SPIx SPI Instance + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_SPI_MODE_MASTER + * @arg @ref LL_SPI_MODE_SLAVE + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetMode(SPI_TypeDef *SPIx, uint32_t Mode) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_MSTR | SPI_CR1_SSI, Mode); +} + +/** + * @brief Get SPI operation mode (Master or Slave) + * @rmtoll CR1 MSTR LL_SPI_GetMode\n + * CR1 SSI LL_SPI_GetMode + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_MODE_MASTER + * @arg @ref LL_SPI_MODE_SLAVE + */ +__STATIC_INLINE uint32_t LL_SPI_GetMode(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_MSTR | SPI_CR1_SSI)); +} + +/** + * @brief Set serial protocol used + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR2 FRF LL_SPI_SetStandard + * @param SPIx SPI Instance + * @param Standard This parameter can be one of the following values: + * @arg @ref LL_SPI_PROTOCOL_MOTOROLA + * @arg @ref LL_SPI_PROTOCOL_TI + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetStandard(SPI_TypeDef *SPIx, uint32_t Standard) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_FRF, Standard); +} + +/** + * @brief Get serial protocol used + * @rmtoll CR2 FRF LL_SPI_GetStandard + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_PROTOCOL_MOTOROLA + * @arg @ref LL_SPI_PROTOCOL_TI + */ +__STATIC_INLINE uint32_t LL_SPI_GetStandard(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_FRF)); +} + +/** + * @brief Set clock phase + * @note This bit should not be changed when communication is ongoing. + * This bit is not used in SPI TI mode. + * @rmtoll CR1 CPHA LL_SPI_SetClockPhase + * @param SPIx SPI Instance + * @param ClockPhase This parameter can be one of the following values: + * @arg @ref LL_SPI_PHASE_1EDGE + * @arg @ref LL_SPI_PHASE_2EDGE + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetClockPhase(SPI_TypeDef *SPIx, uint32_t ClockPhase) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_CPHA, ClockPhase); +} + +/** + * @brief Get clock phase + * @rmtoll CR1 CPHA LL_SPI_GetClockPhase + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_PHASE_1EDGE + * @arg @ref LL_SPI_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_SPI_GetClockPhase(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CPHA)); +} + +/** + * @brief Set clock polarity + * @note This bit should not be changed when communication is ongoing. + * This bit is not used in SPI TI mode. + * @rmtoll CR1 CPOL LL_SPI_SetClockPolarity + * @param SPIx SPI Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_SPI_POLARITY_LOW + * @arg @ref LL_SPI_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetClockPolarity(SPI_TypeDef *SPIx, uint32_t ClockPolarity) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_CPOL, ClockPolarity); +} + +/** + * @brief Get clock polarity + * @rmtoll CR1 CPOL LL_SPI_GetClockPolarity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_POLARITY_LOW + * @arg @ref LL_SPI_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_SPI_GetClockPolarity(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CPOL)); +} + +/** + * @brief Set baud rate prescaler + * @note These bits should not be changed when communication is ongoing. SPI BaudRate = fPCLK/Prescaler. + * @rmtoll CR1 BR LL_SPI_SetBaudRatePrescaler + * @param SPIx SPI Instance + * @param BaudRate This parameter can be one of the following values: + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV2 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV4 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV8 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV16 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV32 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV64 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV128 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV256 + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetBaudRatePrescaler(SPI_TypeDef *SPIx, uint32_t BaudRate) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_BR, BaudRate); +} + +/** + * @brief Get baud rate prescaler + * @rmtoll CR1 BR LL_SPI_GetBaudRatePrescaler + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV2 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV4 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV8 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV16 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV32 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV64 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV128 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV256 + */ +__STATIC_INLINE uint32_t LL_SPI_GetBaudRatePrescaler(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_BR)); +} + +/** + * @brief Set transfer bit order + * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode. + * @rmtoll CR1 LSBFIRST LL_SPI_SetTransferBitOrder + * @param SPIx SPI Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_SPI_LSB_FIRST + * @arg @ref LL_SPI_MSB_FIRST + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetTransferBitOrder(SPI_TypeDef *SPIx, uint32_t BitOrder) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_LSBFIRST, BitOrder); +} + +/** + * @brief Get transfer bit order + * @rmtoll CR1 LSBFIRST LL_SPI_GetTransferBitOrder + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_LSB_FIRST + * @arg @ref LL_SPI_MSB_FIRST + */ +__STATIC_INLINE uint32_t LL_SPI_GetTransferBitOrder(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_LSBFIRST)); +} + +/** + * @brief Set transfer direction mode + * @note For Half-Duplex mode, Rx Direction is set by default. + * In master mode, the MOSI pin is used and in slave mode, the MISO pin is used for Half-Duplex. + * @rmtoll CR1 RXONLY LL_SPI_SetTransferDirection\n + * CR1 BIDIMODE LL_SPI_SetTransferDirection\n + * CR1 BIDIOE LL_SPI_SetTransferDirection + * @param SPIx SPI Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_SPI_FULL_DUPLEX + * @arg @ref LL_SPI_SIMPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_TX + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetTransferDirection(SPI_TypeDef *SPIx, uint32_t TransferDirection) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_RXONLY | SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE, TransferDirection); +} + +/** + * @brief Get transfer direction mode + * @rmtoll CR1 RXONLY LL_SPI_GetTransferDirection\n + * CR1 BIDIMODE LL_SPI_GetTransferDirection\n + * CR1 BIDIOE LL_SPI_GetTransferDirection + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_FULL_DUPLEX + * @arg @ref LL_SPI_SIMPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_TX + */ +__STATIC_INLINE uint32_t LL_SPI_GetTransferDirection(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_RXONLY | SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE)); +} + +/** + * @brief Set frame data width + * @rmtoll CR2 DS LL_SPI_SetDataWidth + * @param SPIx SPI Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_SPI_DATAWIDTH_4BIT + * @arg @ref LL_SPI_DATAWIDTH_5BIT + * @arg @ref LL_SPI_DATAWIDTH_6BIT + * @arg @ref LL_SPI_DATAWIDTH_7BIT + * @arg @ref LL_SPI_DATAWIDTH_8BIT + * @arg @ref LL_SPI_DATAWIDTH_9BIT + * @arg @ref LL_SPI_DATAWIDTH_10BIT + * @arg @ref LL_SPI_DATAWIDTH_11BIT + * @arg @ref LL_SPI_DATAWIDTH_12BIT + * @arg @ref LL_SPI_DATAWIDTH_13BIT + * @arg @ref LL_SPI_DATAWIDTH_14BIT + * @arg @ref LL_SPI_DATAWIDTH_15BIT + * @arg @ref LL_SPI_DATAWIDTH_16BIT + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetDataWidth(SPI_TypeDef *SPIx, uint32_t DataWidth) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_DS, DataWidth); +} + +/** + * @brief Get frame data width + * @rmtoll CR2 DS LL_SPI_GetDataWidth + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_DATAWIDTH_4BIT + * @arg @ref LL_SPI_DATAWIDTH_5BIT + * @arg @ref LL_SPI_DATAWIDTH_6BIT + * @arg @ref LL_SPI_DATAWIDTH_7BIT + * @arg @ref LL_SPI_DATAWIDTH_8BIT + * @arg @ref LL_SPI_DATAWIDTH_9BIT + * @arg @ref LL_SPI_DATAWIDTH_10BIT + * @arg @ref LL_SPI_DATAWIDTH_11BIT + * @arg @ref LL_SPI_DATAWIDTH_12BIT + * @arg @ref LL_SPI_DATAWIDTH_13BIT + * @arg @ref LL_SPI_DATAWIDTH_14BIT + * @arg @ref LL_SPI_DATAWIDTH_15BIT + * @arg @ref LL_SPI_DATAWIDTH_16BIT + */ +__STATIC_INLINE uint32_t LL_SPI_GetDataWidth(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_DS)); +} + +/** + * @brief Set threshold of RXFIFO that triggers an RXNE event + * @rmtoll CR2 FRXTH LL_SPI_SetRxFIFOThreshold + * @param SPIx SPI Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_SPI_RX_FIFO_TH_HALF + * @arg @ref LL_SPI_RX_FIFO_TH_QUARTER + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetRxFIFOThreshold(SPI_TypeDef *SPIx, uint32_t Threshold) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_FRXTH, Threshold); +} + +/** + * @brief Get threshold of RXFIFO that triggers an RXNE event + * @rmtoll CR2 FRXTH LL_SPI_GetRxFIFOThreshold + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_RX_FIFO_TH_HALF + * @arg @ref LL_SPI_RX_FIFO_TH_QUARTER + */ +__STATIC_INLINE uint32_t LL_SPI_GetRxFIFOThreshold(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_FRXTH)); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_CRC_Management CRC Management + * @{ + */ + +/** + * @brief Enable CRC + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCEN LL_SPI_EnableCRC + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableCRC(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_CRCEN); +} + +/** + * @brief Disable CRC + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCEN LL_SPI_DisableCRC + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableCRC(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR1, SPI_CR1_CRCEN); +} + +/** + * @brief Check if CRC is enabled + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCEN LL_SPI_IsEnabledCRC + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledCRC(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR1, SPI_CR1_CRCEN) == (SPI_CR1_CRCEN)) ? 1UL : 0UL); +} + +/** + * @brief Set CRC Length + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCL LL_SPI_SetCRCWidth + * @param SPIx SPI Instance + * @param CRCLength This parameter can be one of the following values: + * @arg @ref LL_SPI_CRC_8BIT + * @arg @ref LL_SPI_CRC_16BIT + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetCRCWidth(SPI_TypeDef *SPIx, uint32_t CRCLength) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_CRCL, CRCLength); +} + +/** + * @brief Get CRC Length + * @rmtoll CR1 CRCL LL_SPI_GetCRCWidth + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_CRC_8BIT + * @arg @ref LL_SPI_CRC_16BIT + */ +__STATIC_INLINE uint32_t LL_SPI_GetCRCWidth(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CRCL)); +} + +/** + * @brief Set CRCNext to transfer CRC on the line + * @note This bit has to be written as soon as the last data is written in the SPIx_DR register. + * @rmtoll CR1 CRCNEXT LL_SPI_SetCRCNext + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetCRCNext(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_CRCNEXT); +} + +/** + * @brief Set polynomial for CRC calculation + * @rmtoll CRCPR CRCPOLY LL_SPI_SetCRCPolynomial + * @param SPIx SPI Instance + * @param CRCPoly This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetCRCPolynomial(SPI_TypeDef *SPIx, uint32_t CRCPoly) +{ + WRITE_REG(SPIx->CRCPR, (uint16_t)CRCPoly); +} + +/** + * @brief Get polynomial for CRC calculation + * @rmtoll CRCPR CRCPOLY LL_SPI_GetCRCPolynomial + * @param SPIx SPI Instance + * @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetCRCPolynomial(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->CRCPR)); +} + +/** + * @brief Get Rx CRC + * @rmtoll RXCRCR RXCRC LL_SPI_GetRxCRC + * @param SPIx SPI Instance + * @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetRxCRC(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->RXCRCR)); +} + +/** + * @brief Get Tx CRC + * @rmtoll TXCRCR TXCRC LL_SPI_GetTxCRC + * @param SPIx SPI Instance + * @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetTxCRC(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->TXCRCR)); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_NSS_Management Slave Select Pin Management + * @{ + */ + +/** + * @brief Set NSS mode + * @note LL_SPI_NSS_SOFT Mode is not used in SPI TI mode. + * @rmtoll CR1 SSM LL_SPI_SetNSSMode\n + * @rmtoll CR2 SSOE LL_SPI_SetNSSMode + * @param SPIx SPI Instance + * @param NSS This parameter can be one of the following values: + * @arg @ref LL_SPI_NSS_SOFT + * @arg @ref LL_SPI_NSS_HARD_INPUT + * @arg @ref LL_SPI_NSS_HARD_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetNSSMode(SPI_TypeDef *SPIx, uint32_t NSS) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_SSM, NSS); + MODIFY_REG(SPIx->CR2, SPI_CR2_SSOE, ((uint32_t)(NSS >> 16U))); +} + +/** + * @brief Get NSS mode + * @rmtoll CR1 SSM LL_SPI_GetNSSMode\n + * @rmtoll CR2 SSOE LL_SPI_GetNSSMode + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_NSS_SOFT + * @arg @ref LL_SPI_NSS_HARD_INPUT + * @arg @ref LL_SPI_NSS_HARD_OUTPUT + */ +__STATIC_INLINE uint32_t LL_SPI_GetNSSMode(SPI_TypeDef *SPIx) +{ + uint32_t Ssm = (READ_BIT(SPIx->CR1, SPI_CR1_SSM)); + uint32_t Ssoe = (READ_BIT(SPIx->CR2, SPI_CR2_SSOE) << 16U); + return (Ssm | Ssoe); +} + +/** + * @brief Enable NSS pulse management + * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode. + * @rmtoll CR2 NSSP LL_SPI_EnableNSSPulseMgt + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableNSSPulseMgt(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_NSSP); +} + +/** + * @brief Disable NSS pulse management + * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode. + * @rmtoll CR2 NSSP LL_SPI_DisableNSSPulseMgt + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableNSSPulseMgt(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_NSSP); +} + +/** + * @brief Check if NSS pulse is enabled + * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode. + * @rmtoll CR2 NSSP LL_SPI_IsEnabledNSSPulse + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledNSSPulse(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_NSSP) == (SPI_CR2_NSSP)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Check if Rx buffer is not empty + * @rmtoll SR RXNE LL_SPI_IsActiveFlag_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_RXNE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_RXNE) == (SPI_SR_RXNE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx buffer is empty + * @rmtoll SR TXE LL_SPI_IsActiveFlag_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_TXE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_TXE) == (SPI_SR_TXE)) ? 1UL : 0UL); +} + +/** + * @brief Get CRC error flag + * @rmtoll SR CRCERR LL_SPI_IsActiveFlag_CRCERR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_CRCERR(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_CRCERR) == (SPI_SR_CRCERR)) ? 1UL : 0UL); +} + +/** + * @brief Get mode fault error flag + * @rmtoll SR MODF LL_SPI_IsActiveFlag_MODF + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_MODF(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_MODF) == (SPI_SR_MODF)) ? 1UL : 0UL); +} + +/** + * @brief Get overrun error flag + * @rmtoll SR OVR LL_SPI_IsActiveFlag_OVR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_OVR(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_OVR) == (SPI_SR_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Get busy flag + * @note The BSY flag is cleared under any one of the following conditions: + * -When the SPI is correctly disabled + * -When a fault is detected in Master mode (MODF bit set to 1) + * -In Master mode, when it finishes a data transmission and no new data is ready to be + * sent + * -In Slave mode, when the BSY flag is set to '0' for at least one SPI clock cycle between + * each data transfer. + * @rmtoll SR BSY LL_SPI_IsActiveFlag_BSY + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_BSY(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_BSY) == (SPI_SR_BSY)) ? 1UL : 0UL); +} + +/** + * @brief Get frame format error flag + * @rmtoll SR FRE LL_SPI_IsActiveFlag_FRE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_FRE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_FRE) == (SPI_SR_FRE)) ? 1UL : 0UL); +} + +/** + * @brief Get FIFO reception Level + * @rmtoll SR FRLVL LL_SPI_GetRxFIFOLevel + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_RX_FIFO_EMPTY + * @arg @ref LL_SPI_RX_FIFO_QUARTER_FULL + * @arg @ref LL_SPI_RX_FIFO_HALF_FULL + * @arg @ref LL_SPI_RX_FIFO_FULL + */ +__STATIC_INLINE uint32_t LL_SPI_GetRxFIFOLevel(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->SR, SPI_SR_FRLVL)); +} + +/** + * @brief Get FIFO Transmission Level + * @rmtoll SR FTLVL LL_SPI_GetTxFIFOLevel + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_TX_FIFO_EMPTY + * @arg @ref LL_SPI_TX_FIFO_QUARTER_FULL + * @arg @ref LL_SPI_TX_FIFO_HALF_FULL + * @arg @ref LL_SPI_TX_FIFO_FULL + */ +__STATIC_INLINE uint32_t LL_SPI_GetTxFIFOLevel(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->SR, SPI_SR_FTLVL)); +} + +/** + * @brief Clear CRC error flag + * @rmtoll SR CRCERR LL_SPI_ClearFlag_CRCERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_CRCERR(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->SR, SPI_SR_CRCERR); +} + +/** + * @brief Clear mode fault error flag + * @note Clearing this flag is done by a read access to the SPIx_SR + * register followed by a write access to the SPIx_CR1 register + * @rmtoll SR MODF LL_SPI_ClearFlag_MODF + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_MODF(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg_sr; + tmpreg_sr = SPIx->SR; + (void) tmpreg_sr; + CLEAR_BIT(SPIx->CR1, SPI_CR1_SPE); +} + +/** + * @brief Clear overrun error flag + * @note Clearing this flag is done by a read access to the SPIx_DR + * register followed by a read access to the SPIx_SR register + * @rmtoll SR OVR LL_SPI_ClearFlag_OVR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_OVR(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg; + tmpreg = SPIx->DR; + (void) tmpreg; + tmpreg = SPIx->SR; + (void) tmpreg; +} + +/** + * @brief Clear frame format error flag + * @note Clearing this flag is done by reading SPIx_SR register + * @rmtoll SR FRE LL_SPI_ClearFlag_FRE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_FRE(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg; + tmpreg = SPIx->SR; + (void) tmpreg; +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_IT_Management Interrupt Management + * @{ + */ + +/** + * @brief Enable error interrupt + * @note This bit controls the generation of an interrupt when an error condition occurs (CRCERR, OVR, MODF in SPI mode, FRE at TI mode). + * @rmtoll CR2 ERRIE LL_SPI_EnableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_ERR(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_ERRIE); +} + +/** + * @brief Enable Rx buffer not empty interrupt + * @rmtoll CR2 RXNEIE LL_SPI_EnableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_RXNE(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_RXNEIE); +} + +/** + * @brief Enable Tx buffer empty interrupt + * @rmtoll CR2 TXEIE LL_SPI_EnableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_TXE(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_TXEIE); +} + +/** + * @brief Disable error interrupt + * @note This bit controls the generation of an interrupt when an error condition occurs (CRCERR, OVR, MODF in SPI mode, FRE at TI mode). + * @rmtoll CR2 ERRIE LL_SPI_DisableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_ERR(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_ERRIE); +} + +/** + * @brief Disable Rx buffer not empty interrupt + * @rmtoll CR2 RXNEIE LL_SPI_DisableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_RXNE(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_RXNEIE); +} + +/** + * @brief Disable Tx buffer empty interrupt + * @rmtoll CR2 TXEIE LL_SPI_DisableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_TXE(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_TXEIE); +} + +/** + * @brief Check if error interrupt is enabled + * @rmtoll CR2 ERRIE LL_SPI_IsEnabledIT_ERR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_ERR(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_ERRIE) == (SPI_CR2_ERRIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx buffer not empty interrupt is enabled + * @rmtoll CR2 RXNEIE LL_SPI_IsEnabledIT_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_RXNE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_RXNEIE) == (SPI_CR2_RXNEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx buffer empty interrupt + * @rmtoll CR2 TXEIE LL_SPI_IsEnabledIT_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_TXE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_TXEIE) == (SPI_CR2_TXEIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_DMA_Management DMA Management + * @{ + */ + +/** + * @brief Enable DMA Rx + * @rmtoll CR2 RXDMAEN LL_SPI_EnableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableDMAReq_RX(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_RXDMAEN); +} + +/** + * @brief Disable DMA Rx + * @rmtoll CR2 RXDMAEN LL_SPI_DisableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableDMAReq_RX(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_RXDMAEN); +} + +/** + * @brief Check if DMA Rx is enabled + * @rmtoll CR2 RXDMAEN LL_SPI_IsEnabledDMAReq_RX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledDMAReq_RX(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_RXDMAEN) == (SPI_CR2_RXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Tx + * @rmtoll CR2 TXDMAEN LL_SPI_EnableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableDMAReq_TX(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_TXDMAEN); +} + +/** + * @brief Disable DMA Tx + * @rmtoll CR2 TXDMAEN LL_SPI_DisableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableDMAReq_TX(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_TXDMAEN); +} + +/** + * @brief Check if DMA Tx is enabled + * @rmtoll CR2 TXDMAEN LL_SPI_IsEnabledDMAReq_TX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledDMAReq_TX(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_TXDMAEN) == (SPI_CR2_TXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Set parity of Last DMA reception + * @rmtoll CR2 LDMARX LL_SPI_SetDMAParity_RX + * @param SPIx SPI Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_SPI_DMA_PARITY_ODD + * @arg @ref LL_SPI_DMA_PARITY_EVEN + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetDMAParity_RX(SPI_TypeDef *SPIx, uint32_t Parity) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_LDMARX, (Parity << SPI_CR2_LDMARX_Pos)); +} + +/** + * @brief Get parity configuration for Last DMA reception + * @rmtoll CR2 LDMARX LL_SPI_GetDMAParity_RX + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_DMA_PARITY_ODD + * @arg @ref LL_SPI_DMA_PARITY_EVEN + */ +__STATIC_INLINE uint32_t LL_SPI_GetDMAParity_RX(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_LDMARX) >> SPI_CR2_LDMARX_Pos); +} + +/** + * @brief Set parity of Last DMA transmission + * @rmtoll CR2 LDMATX LL_SPI_SetDMAParity_TX + * @param SPIx SPI Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_SPI_DMA_PARITY_ODD + * @arg @ref LL_SPI_DMA_PARITY_EVEN + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetDMAParity_TX(SPI_TypeDef *SPIx, uint32_t Parity) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_LDMATX, (Parity << SPI_CR2_LDMATX_Pos)); +} + +/** + * @brief Get parity configuration for Last DMA transmission + * @rmtoll CR2 LDMATX LL_SPI_GetDMAParity_TX + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_DMA_PARITY_ODD + * @arg @ref LL_SPI_DMA_PARITY_EVEN + */ +__STATIC_INLINE uint32_t LL_SPI_GetDMAParity_TX(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_LDMATX) >> SPI_CR2_LDMATX_Pos); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll DR DR LL_SPI_DMA_GetRegAddr + * @param SPIx SPI Instance + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_SPI_DMA_GetRegAddr(SPI_TypeDef *SPIx) +{ + return (uint32_t) &(SPIx->DR); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_DATA_Management DATA Management + * @{ + */ + +/** + * @brief Read 8-Bits in the data register + * @rmtoll DR DR LL_SPI_ReceiveData8 + * @param SPIx SPI Instance + * @retval RxData Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_SPI_ReceiveData8(SPI_TypeDef *SPIx) +{ + return (*((__IO uint8_t *)&SPIx->DR)); +} + +/** + * @brief Read 16-Bits in the data register + * @rmtoll DR DR LL_SPI_ReceiveData16 + * @param SPIx SPI Instance + * @retval RxData Value between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint16_t LL_SPI_ReceiveData16(SPI_TypeDef *SPIx) +{ + return (uint16_t)(READ_REG(SPIx->DR)); +} + +/** + * @brief Write 8-Bits in the data register + * @rmtoll DR DR LL_SPI_TransmitData8 + * @param SPIx SPI Instance + * @param TxData Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_TransmitData8(SPI_TypeDef *SPIx, uint8_t TxData) +{ +#if defined (__GNUC__) + __IO uint8_t *spidr = ((__IO uint8_t *)&SPIx->DR); + *spidr = TxData; +#else + *((__IO uint8_t *)&SPIx->DR) = TxData; +#endif /* __GNUC__ */ +} + +/** + * @brief Write 16-Bits in the data register + * @rmtoll DR DR LL_SPI_TransmitData16 + * @param SPIx SPI Instance + * @param TxData Value between Min_Data=0x00 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_TransmitData16(SPI_TypeDef *SPIx, uint16_t TxData) +{ +#if defined (__GNUC__) + __IO uint16_t *spidr = ((__IO uint16_t *)&SPIx->DR); + *spidr = TxData; +#else + SPIx->DR = TxData; +#endif /* __GNUC__ */ +} + +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup SPI_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_SPI_DeInit(SPI_TypeDef *SPIx); +ErrorStatus LL_SPI_Init(SPI_TypeDef *SPIx, LL_SPI_InitTypeDef *SPI_InitStruct); +void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ +/** + * @} + */ + +/** + * @} + */ + +#if defined(SPI_I2S_SUPPORT) +/** @defgroup I2S_LL I2S + * @{ + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2S_LL_ES_INIT I2S Exported Init structure + * @{ + */ + +/** + * @brief I2S Init structure definition + */ + +typedef struct +{ + uint32_t Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref I2S_LL_EC_MODE + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetTransferMode().*/ + + uint32_t Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_STANDARD + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetStandard().*/ + + + uint32_t DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_DATA_FORMAT + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetDataFormat().*/ + + + uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref I2S_LL_EC_MCLK_OUTPUT + + This feature can be modified afterwards using unitary functions @ref LL_I2S_EnableMasterClock() or @ref LL_I2S_DisableMasterClock.*/ + + + uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_AUDIO_FREQ + + Audio Frequency can be modified afterwards using Reference manual formulas to calculate Prescaler Linear, Parity + and unitary functions @ref LL_I2S_SetPrescalerLinear() and @ref LL_I2S_SetPrescalerParity() to set it.*/ + + + uint32_t ClockPolarity; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref I2S_LL_EC_POLARITY + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetClockPolarity().*/ + +} LL_I2S_InitTypeDef; + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2S_LL_Exported_Constants I2S Exported Constants + * @{ + */ + +/** @defgroup I2S_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_I2S_ReadReg function + * @{ + */ +#define LL_I2S_SR_RXNE LL_SPI_SR_RXNE /*!< Rx buffer not empty flag */ +#define LL_I2S_SR_TXE LL_SPI_SR_TXE /*!< Tx buffer empty flag */ +#define LL_I2S_SR_BSY LL_SPI_SR_BSY /*!< Busy flag */ +#define LL_I2S_SR_UDR SPI_SR_UDR /*!< Underrun flag */ +#define LL_I2S_SR_OVR LL_SPI_SR_OVR /*!< Overrun flag */ +#define LL_I2S_SR_FRE LL_SPI_SR_FRE /*!< TI mode frame format error flag */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_SPI_ReadReg and LL_SPI_WriteReg functions + * @{ + */ +#define LL_I2S_CR2_RXNEIE LL_SPI_CR2_RXNEIE /*!< Rx buffer not empty interrupt enable */ +#define LL_I2S_CR2_TXEIE LL_SPI_CR2_TXEIE /*!< Tx buffer empty interrupt enable */ +#define LL_I2S_CR2_ERRIE LL_SPI_CR2_ERRIE /*!< Error interrupt enable */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_DATA_FORMAT Data format + * @{ + */ +#define LL_I2S_DATAFORMAT_16B 0x00000000U /*!< Data length 16 bits, Channel length 16bit */ +#define LL_I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN) /*!< Data length 16 bits, Channel length 32bit */ +#define LL_I2S_DATAFORMAT_24B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0) /*!< Data length 24 bits, Channel length 32bit */ +#define LL_I2S_DATAFORMAT_32B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1) /*!< Data length 16 bits, Channel length 32bit */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_I2S_POLARITY_LOW 0x00000000U /*!< Clock steady state is low level */ +#define LL_I2S_POLARITY_HIGH (SPI_I2SCFGR_CKPOL) /*!< Clock steady state is high level */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_STANDARD I2s Standard + * @{ + */ +#define LL_I2S_STANDARD_PHILIPS 0x00000000U /*!< I2S standard philips */ +#define LL_I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0) /*!< MSB justified standard (left justified) */ +#define LL_I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1) /*!< LSB justified standard (right justified) */ +#define LL_I2S_STANDARD_PCM_SHORT (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1) /*!< PCM standard, short frame synchronization */ +#define LL_I2S_STANDARD_PCM_LONG (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC) /*!< PCM standard, long frame synchronization */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_MODE Operation Mode + * @{ + */ +#define LL_I2S_MODE_SLAVE_TX 0x00000000U /*!< Slave Tx configuration */ +#define LL_I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0) /*!< Slave Rx configuration */ +#define LL_I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1) /*!< Master Tx configuration */ +#define LL_I2S_MODE_MASTER_RX (SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1) /*!< Master Rx configuration */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_PRESCALER_FACTOR Prescaler Factor + * @{ + */ +#define LL_I2S_PRESCALER_PARITY_EVEN 0x00000000U /*!< Odd factor: Real divider value is = I2SDIV * 2 */ +#define LL_I2S_PRESCALER_PARITY_ODD (SPI_I2SPR_ODD >> 8U) /*!< Odd factor: Real divider value is = (I2SDIV * 2)+1 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup I2S_LL_EC_MCLK_OUTPUT MCLK Output + * @{ + */ +#define LL_I2S_MCLK_OUTPUT_DISABLE 0x00000000U /*!< Master clock output is disabled */ +#define LL_I2S_MCLK_OUTPUT_ENABLE (SPI_I2SPR_MCKOE) /*!< Master clock output is enabled */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_AUDIO_FREQ Audio Frequency + * @{ + */ + +#define LL_I2S_AUDIOFREQ_192K 192000U /*!< Audio Frequency configuration 192000 Hz */ +#define LL_I2S_AUDIOFREQ_96K 96000U /*!< Audio Frequency configuration 96000 Hz */ +#define LL_I2S_AUDIOFREQ_48K 48000U /*!< Audio Frequency configuration 48000 Hz */ +#define LL_I2S_AUDIOFREQ_44K 44100U /*!< Audio Frequency configuration 44100 Hz */ +#define LL_I2S_AUDIOFREQ_32K 32000U /*!< Audio Frequency configuration 32000 Hz */ +#define LL_I2S_AUDIOFREQ_22K 22050U /*!< Audio Frequency configuration 22050 Hz */ +#define LL_I2S_AUDIOFREQ_16K 16000U /*!< Audio Frequency configuration 16000 Hz */ +#define LL_I2S_AUDIOFREQ_11K 11025U /*!< Audio Frequency configuration 11025 Hz */ +#define LL_I2S_AUDIOFREQ_8K 8000U /*!< Audio Frequency configuration 8000 Hz */ +#define LL_I2S_AUDIOFREQ_DEFAULT 2U /*!< Audio Freq not specified. Register I2SDIV = 2 */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2S_LL_Exported_Macros I2S Exported Macros + * @{ + */ + +/** @defgroup I2S_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in I2S register + * @param __INSTANCE__ I2S Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_I2S_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in I2S register + * @param __INSTANCE__ I2S Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_I2S_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2S_LL_Exported_Functions I2S Exported Functions + * @{ + */ + +/** @defgroup I2S_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Select I2S mode and Enable I2S peripheral + * @rmtoll I2SCFGR I2SMOD LL_I2S_Enable\n + * I2SCFGR I2SE LL_I2S_Enable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_Enable(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD | SPI_I2SCFGR_I2SE); +} + +/** + * @brief Disable I2S peripheral + * @rmtoll I2SCFGR I2SE LL_I2S_Disable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_Disable(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD | SPI_I2SCFGR_I2SE); +} + +/** + * @brief Check if I2S peripheral is enabled + * @rmtoll I2SCFGR I2SE LL_I2S_IsEnabled + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabled(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SE) == (SPI_I2SCFGR_I2SE)) ? 1UL : 0UL); +} + +/** + * @brief Set I2S data frame length + * @rmtoll I2SCFGR DATLEN LL_I2S_SetDataFormat\n + * I2SCFGR CHLEN LL_I2S_SetDataFormat + * @param SPIx SPI Instance + * @param DataFormat This parameter can be one of the following values: + * @arg @ref LL_I2S_DATAFORMAT_16B + * @arg @ref LL_I2S_DATAFORMAT_16B_EXTENDED + * @arg @ref LL_I2S_DATAFORMAT_24B + * @arg @ref LL_I2S_DATAFORMAT_32B + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetDataFormat(SPI_TypeDef *SPIx, uint32_t DataFormat) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN, DataFormat); +} + +/** + * @brief Get I2S data frame length + * @rmtoll I2SCFGR DATLEN LL_I2S_GetDataFormat\n + * I2SCFGR CHLEN LL_I2S_GetDataFormat + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_DATAFORMAT_16B + * @arg @ref LL_I2S_DATAFORMAT_16B_EXTENDED + * @arg @ref LL_I2S_DATAFORMAT_24B + * @arg @ref LL_I2S_DATAFORMAT_32B + */ +__STATIC_INLINE uint32_t LL_I2S_GetDataFormat(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)); +} + +/** + * @brief Set I2S clock polarity + * @rmtoll I2SCFGR CKPOL LL_I2S_SetClockPolarity + * @param SPIx SPI Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_I2S_POLARITY_LOW + * @arg @ref LL_I2S_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetClockPolarity(SPI_TypeDef *SPIx, uint32_t ClockPolarity) +{ + SET_BIT(SPIx->I2SCFGR, ClockPolarity); +} + +/** + * @brief Get I2S clock polarity + * @rmtoll I2SCFGR CKPOL LL_I2S_GetClockPolarity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_POLARITY_LOW + * @arg @ref LL_I2S_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_I2S_GetClockPolarity(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_CKPOL)); +} + +/** + * @brief Set I2S standard protocol + * @rmtoll I2SCFGR I2SSTD LL_I2S_SetStandard\n + * I2SCFGR PCMSYNC LL_I2S_SetStandard + * @param SPIx SPI Instance + * @param Standard This parameter can be one of the following values: + * @arg @ref LL_I2S_STANDARD_PHILIPS + * @arg @ref LL_I2S_STANDARD_MSB + * @arg @ref LL_I2S_STANDARD_LSB + * @arg @ref LL_I2S_STANDARD_PCM_SHORT + * @arg @ref LL_I2S_STANDARD_PCM_LONG + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetStandard(SPI_TypeDef *SPIx, uint32_t Standard) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC, Standard); +} + +/** + * @brief Get I2S standard protocol + * @rmtoll I2SCFGR I2SSTD LL_I2S_GetStandard\n + * I2SCFGR PCMSYNC LL_I2S_GetStandard + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_STANDARD_PHILIPS + * @arg @ref LL_I2S_STANDARD_MSB + * @arg @ref LL_I2S_STANDARD_LSB + * @arg @ref LL_I2S_STANDARD_PCM_SHORT + * @arg @ref LL_I2S_STANDARD_PCM_LONG + */ +__STATIC_INLINE uint32_t LL_I2S_GetStandard(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC)); +} + +/** + * @brief Set I2S transfer mode + * @rmtoll I2SCFGR I2SCFG LL_I2S_SetTransferMode + * @param SPIx SPI Instance + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_I2S_MODE_SLAVE_TX + * @arg @ref LL_I2S_MODE_SLAVE_RX + * @arg @ref LL_I2S_MODE_MASTER_TX + * @arg @ref LL_I2S_MODE_MASTER_RX + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetTransferMode(SPI_TypeDef *SPIx, uint32_t Mode) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SCFG, Mode); +} + +/** + * @brief Get I2S transfer mode + * @rmtoll I2SCFGR I2SCFG LL_I2S_GetTransferMode + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_MODE_SLAVE_TX + * @arg @ref LL_I2S_MODE_SLAVE_RX + * @arg @ref LL_I2S_MODE_MASTER_TX + * @arg @ref LL_I2S_MODE_MASTER_RX + */ +__STATIC_INLINE uint32_t LL_I2S_GetTransferMode(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SCFG)); +} + +/** + * @brief Set I2S linear prescaler + * @rmtoll I2SPR I2SDIV LL_I2S_SetPrescalerLinear + * @param SPIx SPI Instance + * @param PrescalerLinear Value between Min_Data=0x02 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetPrescalerLinear(SPI_TypeDef *SPIx, uint8_t PrescalerLinear) +{ + MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_I2SDIV, PrescalerLinear); +} + +/** + * @brief Get I2S linear prescaler + * @rmtoll I2SPR I2SDIV LL_I2S_GetPrescalerLinear + * @param SPIx SPI Instance + * @retval PrescalerLinear Value between Min_Data=0x02 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2S_GetPrescalerLinear(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SPR, SPI_I2SPR_I2SDIV)); +} + +/** + * @brief Set I2S parity prescaler + * @rmtoll I2SPR ODD LL_I2S_SetPrescalerParity + * @param SPIx SPI Instance + * @param PrescalerParity This parameter can be one of the following values: + * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN + * @arg @ref LL_I2S_PRESCALER_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetPrescalerParity(SPI_TypeDef *SPIx, uint32_t PrescalerParity) +{ + MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_ODD, PrescalerParity << 8U); +} + +/** + * @brief Get I2S parity prescaler + * @rmtoll I2SPR ODD LL_I2S_GetPrescalerParity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN + * @arg @ref LL_I2S_PRESCALER_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_I2S_GetPrescalerParity(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SPR, SPI_I2SPR_ODD) >> 8U); +} + +/** + * @brief Enable the master clock output (Pin MCK) + * @rmtoll I2SPR MCKOE LL_I2S_EnableMasterClock + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableMasterClock(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE); +} + +/** + * @brief Disable the master clock output (Pin MCK) + * @rmtoll I2SPR MCKOE LL_I2S_DisableMasterClock + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableMasterClock(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE); +} + +/** + * @brief Check if the master clock output (Pin MCK) is enabled + * @rmtoll I2SPR MCKOE LL_I2S_IsEnabledMasterClock + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledMasterClock(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE) == (SPI_I2SPR_MCKOE)) ? 1UL : 0UL); +} + +#if defined(SPI_I2SCFGR_ASTRTEN) +/** + * @brief Enable asynchronous start + * @rmtoll I2SCFGR ASTRTEN LL_I2S_EnableAsyncStart + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableAsyncStart(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN); +} + +/** + * @brief Disable asynchronous start + * @rmtoll I2SCFGR ASTRTEN LL_I2S_DisableAsyncStart + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableAsyncStart(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN); +} + +/** + * @brief Check if asynchronous start is enabled + * @rmtoll I2SCFGR ASTRTEN LL_I2S_IsEnabledAsyncStart + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledAsyncStart(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN) == (SPI_I2SCFGR_ASTRTEN)) ? 1UL : 0UL); +} +#endif /* SPI_I2SCFGR_ASTRTEN */ + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_FLAG FLAG Management + * @{ + */ + +/** + * @brief Check if Rx buffer is not empty + * @rmtoll SR RXNE LL_I2S_IsActiveFlag_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_RXNE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_RXNE(SPIx); +} + +/** + * @brief Check if Tx buffer is empty + * @rmtoll SR TXE LL_I2S_IsActiveFlag_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_TXE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_TXE(SPIx); +} + +/** + * @brief Get busy flag + * @rmtoll SR BSY LL_I2S_IsActiveFlag_BSY + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_BSY(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_BSY(SPIx); +} + +/** + * @brief Get overrun error flag + * @rmtoll SR OVR LL_I2S_IsActiveFlag_OVR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_OVR(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_OVR(SPIx); +} + +/** + * @brief Get underrun error flag + * @rmtoll SR UDR LL_I2S_IsActiveFlag_UDR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_UDR(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_UDR) == (SPI_SR_UDR)) ? 1UL : 0UL); +} + +/** + * @brief Get frame format error flag + * @rmtoll SR FRE LL_I2S_IsActiveFlag_FRE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_FRE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_FRE(SPIx); +} + +/** + * @brief Get channel side flag. + * @note 0: Channel Left has to be transmitted or has been received\n + * 1: Channel Right has to be transmitted or has been received\n + * It has no significance in PCM mode. + * @rmtoll SR CHSIDE LL_I2S_IsActiveFlag_CHSIDE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_CHSIDE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_CHSIDE) == (SPI_SR_CHSIDE)) ? 1UL : 0UL); +} + +/** + * @brief Clear overrun error flag + * @rmtoll SR OVR LL_I2S_ClearFlag_OVR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_OVR(SPI_TypeDef *SPIx) +{ + LL_SPI_ClearFlag_OVR(SPIx); +} + +/** + * @brief Clear underrun error flag + * @rmtoll SR UDR LL_I2S_ClearFlag_UDR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_UDR(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg; + tmpreg = SPIx->SR; + (void)tmpreg; +} + +/** + * @brief Clear frame format error flag + * @rmtoll SR FRE LL_I2S_ClearFlag_FRE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_FRE(SPI_TypeDef *SPIx) +{ + LL_SPI_ClearFlag_FRE(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_IT Interrupt Management + * @{ + */ + +/** + * @brief Enable error IT + * @note This bit controls the generation of an interrupt when an error condition occurs (OVR, UDR and FRE in I2S mode). + * @rmtoll CR2 ERRIE LL_I2S_EnableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_ERR(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_ERR(SPIx); +} + +/** + * @brief Enable Rx buffer not empty IT + * @rmtoll CR2 RXNEIE LL_I2S_EnableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_RXNE(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_RXNE(SPIx); +} + +/** + * @brief Enable Tx buffer empty IT + * @rmtoll CR2 TXEIE LL_I2S_EnableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_TXE(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_TXE(SPIx); +} + +/** + * @brief Disable error IT + * @note This bit controls the generation of an interrupt when an error condition occurs (OVR, UDR and FRE in I2S mode). + * @rmtoll CR2 ERRIE LL_I2S_DisableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_ERR(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_ERR(SPIx); +} + +/** + * @brief Disable Rx buffer not empty IT + * @rmtoll CR2 RXNEIE LL_I2S_DisableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_RXNE(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_RXNE(SPIx); +} + +/** + * @brief Disable Tx buffer empty IT + * @rmtoll CR2 TXEIE LL_I2S_DisableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_TXE(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_TXE(SPIx); +} + +/** + * @brief Check if ERR IT is enabled + * @rmtoll CR2 ERRIE LL_I2S_IsEnabledIT_ERR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_ERR(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_ERR(SPIx); +} + +/** + * @brief Check if RXNE IT is enabled + * @rmtoll CR2 RXNEIE LL_I2S_IsEnabledIT_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_RXNE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_RXNE(SPIx); +} + +/** + * @brief Check if TXE IT is enabled + * @rmtoll CR2 TXEIE LL_I2S_IsEnabledIT_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_TXE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_TXE(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_DMA DMA Management + * @{ + */ + +/** + * @brief Enable DMA Rx + * @rmtoll CR2 RXDMAEN LL_I2S_EnableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableDMAReq_RX(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableDMAReq_RX(SPIx); +} + +/** + * @brief Disable DMA Rx + * @rmtoll CR2 RXDMAEN LL_I2S_DisableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableDMAReq_RX(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableDMAReq_RX(SPIx); +} + +/** + * @brief Check if DMA Rx is enabled + * @rmtoll CR2 RXDMAEN LL_I2S_IsEnabledDMAReq_RX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledDMAReq_RX(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledDMAReq_RX(SPIx); +} + +/** + * @brief Enable DMA Tx + * @rmtoll CR2 TXDMAEN LL_I2S_EnableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableDMAReq_TX(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableDMAReq_TX(SPIx); +} + +/** + * @brief Disable DMA Tx + * @rmtoll CR2 TXDMAEN LL_I2S_DisableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableDMAReq_TX(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableDMAReq_TX(SPIx); +} + +/** + * @brief Check if DMA Tx is enabled + * @rmtoll CR2 TXDMAEN LL_I2S_IsEnabledDMAReq_TX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledDMAReq_TX(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledDMAReq_TX(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_DATA DATA Management + * @{ + */ + +/** + * @brief Read 16-Bits in data register + * @rmtoll DR DR LL_I2S_ReceiveData16 + * @param SPIx SPI Instance + * @retval RxData Value between Min_Data=0x0000 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint16_t LL_I2S_ReceiveData16(SPI_TypeDef *SPIx) +{ + return LL_SPI_ReceiveData16(SPIx); +} + +/** + * @brief Write 16-Bits in data register + * @rmtoll DR DR LL_I2S_TransmitData16 + * @param SPIx SPI Instance + * @param TxData Value between Min_Data=0x0000 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_I2S_TransmitData16(SPI_TypeDef *SPIx, uint16_t TxData) +{ + LL_SPI_TransmitData16(SPIx, TxData); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2S_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_I2S_DeInit(SPI_TypeDef *SPIx); +ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct); +void LL_I2S_StructInit(LL_I2S_InitTypeDef *I2S_InitStruct); +void LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* SPI_I2S_SUPPORT */ + +#endif /* defined (SPI1) || defined (SPI2) || defined (SPI3) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_SPI_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_system.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_system.h new file mode 100644 index 0000000..7dbe626 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_system.h @@ -0,0 +1,2085 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_system.h + * @author MCD Application Team + * @brief Header file of SYSTEM LL module. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL SYSTEM driver contains a set of generic APIs that can be + used by user: + (+) Some of the FLASH features need to be handled in the SYSTEM file. + (+) Access to DBG registers + (+) Access to SYSCFG registers + (+) Access to VREFBUF registers + + @endverbatim + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_SYSTEM_H +#define STM32G0xx_LL_SYSTEM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (FLASH) || defined (SYSCFG) || defined (DBG) + +/** @defgroup SYSTEM_LL SYSTEM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants + * @{ + */ + +/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG REMAP + * @{ + */ +#define LL_SYSCFG_REMAP_FLASH 0x00000000U /*!< Main Flash memory mapped at 0x00000000 */ +#define LL_SYSCFG_REMAP_SYSTEMFLASH SYSCFG_CFGR1_MEM_MODE_0 /*!< System Flash memory mapped at 0x00000000 */ +#define LL_SYSCFG_REMAP_SRAM (SYSCFG_CFGR1_MEM_MODE_1 | SYSCFG_CFGR1_MEM_MODE_0) /*!< Embedded SRAM mapped at 0x00000000 */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_PIN_RMP SYSCFG PIN RMP + * @{ + */ +#define LL_SYSCFG_PIN_RMP_PA11 SYSCFG_CFGR1_PA11_RMP /*!< PA11 pad behaves as PA9 pin */ +#define LL_SYSCFG_PIN_RMP_PA12 SYSCFG_CFGR1_PA12_RMP /*!< PA12 pad behaves as PA10 pin */ +/** + * @} + */ + + +#if defined(SYSCFG_CFGR1_IR_MOD) +/** @defgroup SYSTEM_LL_EC_IR_MOD SYSCFG IR Modulation + * @{ + */ +#define LL_SYSCFG_IR_MOD_TIM16 (SYSCFG_CFGR1_IR_MOD_0 & SYSCFG_CFGR1_IR_MOD_1) /*!< 00: Timer16 is selected as IRDA Modulation envelope source */ +#define LL_SYSCFG_IR_MOD_USART1 (SYSCFG_CFGR1_IR_MOD_0) /*!< 01: USART1 is selected as IRDA Modulation envelope source */ +#if defined(USART4) +#define LL_SYSCFG_IR_MOD_USART4 (SYSCFG_CFGR1_IR_MOD_1) /*!< 10: USART4 is selected as IRDA Modulation envelope source */ +#else +#define LL_SYSCFG_IR_MOD_USART2 (SYSCFG_CFGR1_IR_MOD_1) /*!< 10: USART2 is selected as IRDA Modulation envelope source */ +#endif /* USART4 */ +/** + * @} + */ +/** @defgroup SYSTEM_LL_EC_IR_POL SYSCFG IR Polarity + * @{ + */ +#define LL_SYSCFG_IR_POL_NOT_INVERTED 0x00000000U /*!< 0: Output of IRDA (IROut) not inverted */ +#define LL_SYSCFG_IR_POL_INVERTED (SYSCFG_CFGR1_IR_POL) /*!< 1: Output of IRDA (IROut) inverted */ +/** + * @} + */ +#endif /* SYSCFG_CFGR1_IR_MOD */ + +#if defined(SYSCFG_CFGR1_BOOSTEN) +/** @defgroup SYSTEM_LL_EC_BOOSTEN SYSCFG I/O analog switch voltage booster enable + * @{ + */ +#define LL_SYSCFG_CFGR1_BOOSTEN SYSCFG_CFGR1_BOOSTEN /*!< I/O analog switch voltage booster enable */ +/** + * @} + */ +#endif /* SYSCFG_CFGR1_BOOSTEN */ + +#if defined(SYSCFG_CFGR1_UCPD1_STROBE) || defined(SYSCFG_CFGR1_UCPD2_STROBE) +/** @defgroup SYSTEM_LL_EC_UCPD_DBATTDIS SYSCFG UCPD Dead Battery feature Disable + * @{ + */ +#define LL_SYSCFG_UCPD1_STROBE SYSCFG_CFGR1_UCPD1_STROBE /*!< UCPD1 STROBE sw configuration */ +#define LL_SYSCFG_UCPD2_STROBE SYSCFG_CFGR1_UCPD2_STROBE /*!< UCPD2 STROBE sw configuration */ +/** + * @} + */ +#endif /* SYSCFG_CFGR1_UCPD1_STROBE) || SYSCFG_CFGR1_UCPD2_STROBE */ + +/** @defgroup SYSTEM_LL_EC_I2C_FASTMODEPLUS SYSCFG I2C FASTMODEPLUS + * @{ + */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< I2C PB6 Fast mode plus */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< I2C PB7 Fast mode plus */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< I2C PB8 Fast mode plus */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< I2C PB9 Fast mode plus */ +#if defined(SYSCFG_CFGR1_I2C1_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable I2C1 Fast mode Plus */ +#endif /*SYSCFG_CFGR1_I2C1_FMP*/ +#if defined(SYSCFG_CFGR1_I2C2_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C2_FMP /*!< Enable I2C2 Fast mode plus */ +#endif /*SYSCFG_CFGR1_I2C2_FMP*/ +#if defined(SYSCFG_CFGR1_I2C_PA9_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_PA9_FMP /*!< Enable Fast Mode Plus on PA9 */ +#endif /*SYSCFG_CFGR1_I2C_PA9_FMP*/ +#if defined(SYSCFG_CFGR1_I2C_PA10_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_PA10_FMP /*!< Enable Fast Mode Plus on PA10 */ +#endif /*SYSCFG_CFGR1_I2C_PA10_FMP*/ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#if defined(SYSCFG_CFGR1_I2C3_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable I2C3 Fast mode plus */ +#endif /*SYSCFG_CFGR1_I2C3_FMP*/ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_TIMBREAK SYSCFG TIMER BREAK + * @{ + */ +#define LL_SYSCFG_TIMBREAK_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC error signal + with Break Input of TIM1/15/16/17 */ +#if defined (PWR_PVD_SUPPORT) +#define LL_SYSCFG_TIMBREAK_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection + with TIM1/15/16/17 Break Input and also + the PVDE and PLS bits of the Power Control Interface */ +#endif /* PWR_PVD_SUPPORT */ +#define LL_SYSCFG_TIMBREAK_SRAM_PARITY SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM_PARITY error signal + with Break Input of TIM1/15/16/17 */ +#define LL_SYSCFG_TIMBREAK_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP (Hardfault) output of + CortexM0 with Break Input of TIM1/15/16/17 */ +/** + * @} + */ + +#if defined(SYSCFG_CDEN_SUPPORT) +/** @defgroup SYSTEM_LL_EC_CLAMPING_DIODE SYSCFG CLAMPING DIODE + * @{ + */ +#define LL_SYSCFG_CFGR2_PA1_CDEN SYSCFG_CFGR2_PA1_CDEN /*!< Enables Clamping diode of PA1 */ +#define LL_SYSCFG_CFGR2_PA3_CDEN SYSCFG_CFGR2_PA3_CDEN /*!< Enables Clamping diode of PA3 */ +#define LL_SYSCFG_CFGR2_PA5_CDEN SYSCFG_CFGR2_PA5_CDEN /*!< Enables Clamping diode of PA5 */ +#define LL_SYSCFG_CFGR2_PA6_CDEN SYSCFG_CFGR2_PA6_CDEN /*!< Enables Clamping diode of PA6 */ +#define LL_SYSCFG_CFGR2_PA13_CDEN SYSCFG_CFGR2_PA13_CDEN /*!< Enables Clamping diode of PA13 */ +#define LL_SYSCFG_CFGR2_PB0_CDEN SYSCFG_CFGR2_PB0_CDEN /*!< Enables Clamping diode of PB0 */ +#define LL_SYSCFG_CFGR2_PB1_CDEN SYSCFG_CFGR2_PB1_CDEN /*!< Enables Clamping diode of PB1 */ +#define LL_SYSCFG_CFGR2_PB2_CDEN SYSCFG_CFGR2_PB2_CDEN /*!< Enables Clamping diode of PB2 */ +/** + * @} + */ +#endif /* SYSCFG_CDEN_SUPPORT */ + +/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP + * @{ + */ +#if defined(DBG_APB_FZ1_DBG_TIM2_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM2_STOP DBG_APB_FZ1_DBG_TIM2_STOP /*!< TIM2 counter stopped when core is halted */ +#endif /*DBG_APB_FZ1_DBG_TIM2_STOP*/ +#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBG_APB_FZ1_DBG_TIM3_STOP /*!< TIM3 counter stopped when core is halted */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define LL_DBGMCU_APB1_GRP1_TIM4_STOP DBG_APB_FZ1_DBG_TIM4_STOP /*!< TIM4 counter stopped when core is halted */ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +#if defined(DBG_APB_FZ1_DBG_TIM6_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM6_STOP DBG_APB_FZ1_DBG_TIM6_STOP /*!< TIM6 counter stopped when core is halted */ +#endif /*DBG_APB_FZ1_DBG_TIM6_STOP*/ +#if defined(DBG_APB_FZ1_DBG_TIM7_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM7_STOP DBG_APB_FZ1_DBG_TIM7_STOP /*!< TIM7 counter stopped when core is halted */ +#endif /*DBG_APB_FZ1_DBG_TIM7_STOP*/ +#define LL_DBGMCU_APB1_GRP1_RTC_STOP DBG_APB_FZ1_DBG_RTC_STOP /*!< RTC Calendar frozen when core is halted */ +#define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBG_APB_FZ1_DBG_WWDG_STOP /*!< Debug Window Watchdog stopped when Core is halted */ +#define LL_DBGMCU_APB1_GRP1_IWDG_STOP DBG_APB_FZ1_DBG_IWDG_STOP /*!< Debug Independent Watchdog stopped when Core is halted */ +#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP /*!< I2C1 SMBUS timeout mode stopped when Core is halted */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define LL_DBGMCU_APB1_GRP1_I2C2_STOP DBG_APB_FZ1_DBG_I2C2_SMBUS_TIMEOUT_STOP /*!< I2C2 SMBUS timeout mode stopped when Core is halted */ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +#if defined(DBG_APB_FZ1_DBG_LPTIM2_STOP) +#define LL_DBGMCU_APB1_GRP1_LPTIM2_STOP DBG_APB_FZ1_DBG_LPTIM2_STOP /*!< LPTIM2 counter stopped when Core is halted */ +#endif /* DBG_APB_FZ1_DBG_LPTIM2_STOP */ +#if defined(DBG_APB_FZ1_DBG_LPTIM1_STOP) +#define LL_DBGMCU_APB1_GRP1_LPTIM1_STOP DBG_APB_FZ1_DBG_LPTIM1_STOP /*!< LPTIM1 counter stopped when Core is halted */ +#endif /* DBG_APB_FZ1_DBG_LPTIM1_STOP */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP + * @{ + */ +#define LL_DBGMCU_APB2_GRP1_TIM1_STOP DBG_APB_FZ2_DBG_TIM1_STOP /*!< TIM1 counter stopped when core is halted */ +#if defined(DBG_APB_FZ2_DBG_TIM14_STOP) +#define LL_DBGMCU_APB2_GRP1_TIM14_STOP DBG_APB_FZ2_DBG_TIM14_STOP /*!< TIM14 counter stopped when core is halted */ +#endif /* DBG_APB_FZ2_DBG_TIM14_STOP */ +#if defined(DBG_APB_FZ2_DBG_TIM15_STOP) +#define LL_DBGMCU_APB2_GRP1_TIM15_STOP DBG_APB_FZ2_DBG_TIM15_STOP /*!< TIM15 counter stopped when core is halted */ +#endif /*DBG_APB_FZ2_DBG_TIM15_STOP*/ +#define LL_DBGMCU_APB2_GRP1_TIM16_STOP DBG_APB_FZ2_DBG_TIM16_STOP /*!< TIM16 counter stopped when core is halted */ +#define LL_DBGMCU_APB2_GRP1_TIM17_STOP DBG_APB_FZ2_DBG_TIM17_STOP /*!< TIM17 counter stopped when core is halted */ +/** + * @} + */ + + +#if defined(VREFBUF) +/** @defgroup SYSTEM_LL_EC_VOLTAGE VREFBUF VOLTAGE + * @{ + */ +#define LL_VREFBUF_VOLTAGE_SCALE0 0x00000000U /*!< Voltage reference scale 0 (VREF_OUT1) */ +#define LL_VREFBUF_VOLTAGE_SCALE1 VREFBUF_CSR_VRS /*!< Voltage reference scale 1 (VREF_OUT2) */ +/** + * @} + */ +#endif /* VREFBUF */ + +/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY + * @{ + */ +#define LL_FLASH_LATENCY_0 0x00000000U /*!< FLASH Zero Latency cycle */ +#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY_0 /*!< FLASH One Latency cycle */ +#define LL_FLASH_LATENCY_2 FLASH_ACR_LATENCY_1 /*!< FLASH Two wait states */ +#define LL_FLASH_LATENCY_3 (FLASH_ACR_LATENCY_1 | FLASH_ACR_LATENCY_0) /*!< FLASH Three wait states */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions + * @{ + */ + +/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG + * @{ + */ + +/** + * @brief Set memory mapping at address 0x00000000 + * @rmtoll SYSCFG_CFGR1 MEM_MODE LL_SYSCFG_SetRemapMemory + * @param Memory This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_REMAP_FLASH + * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH + * @arg @ref LL_SYSCFG_REMAP_SRAM + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetRemapMemory(uint32_t Memory) +{ + MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, Memory); +} + +/** + * @brief Get memory mapping at address 0x00000000 + * @rmtoll SYSCFG_CFGR1 MEM_MODE LL_SYSCFG_GetRemapMemory + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_REMAP_FLASH + * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH + * @arg @ref LL_SYSCFG_REMAP_SRAM + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemory(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE)); +} + +/** + * @brief Enable remap of a pin on different pad + * @rmtoll SYSCFG_CFGR1 PA11_RMP LL_SYSCFG_EnablePinRemap\n + * SYSCFG_CFGR1 PA12_RMP LL_SYSCFG_EnablePinRemap\n + * @param PinRemap This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_PIN_RMP_PA11 + * @arg @ref LL_SYSCFG_PIN_RMP_PA12 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnablePinRemap(uint32_t PinRemap) +{ + SET_BIT(SYSCFG->CFGR1, PinRemap); +} + +/** + * @brief Enable remap of a pin on different pad + * @rmtoll SYSCFG_CFGR1 PA11_RMP LL_SYSCFG_DisablePinRemap\n + * SYSCFG_CFGR1 PA12_RMP LL_SYSCFG_DisablePinRemap\n + * @param PinRemap This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_PIN_RMP_PA11 + * @arg @ref LL_SYSCFG_PIN_RMP_PA12 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisablePinRemap(uint32_t PinRemap) +{ + CLEAR_BIT(SYSCFG->CFGR1, PinRemap); +} + +#if defined(SYSCFG_CFGR1_IR_MOD) +/** + * @brief Set IR Modulation Envelope signal source. + * @rmtoll SYSCFG_CFGR1 IR_MOD LL_SYSCFG_SetIRModEnvelopeSignal + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_IR_MOD_TIM16 + * @arg @ref LL_SYSCFG_IR_MOD_USART1 + * @arg @ref LL_SYSCFG_IR_MOD_USART4 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetIRModEnvelopeSignal(uint32_t Source) +{ + MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_MOD, Source); +} + +/** + * @brief Get IR Modulation Envelope signal source. + * @rmtoll SYSCFG_CFGR1 IR_MOD LL_SYSCFG_GetIRModEnvelopeSignal + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_IR_MOD_TIM16 + * @arg @ref LL_SYSCFG_IR_MOD_USART1 + * @arg @ref LL_SYSCFG_IR_MOD_USART4 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetIRModEnvelopeSignal(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_MOD)); +} + +/** + * @brief Set IR Output polarity. + * @rmtoll SYSCFG_CFGR1 IR_POL LL_SYSCFG_SetIRPolarity + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_IR_POL_INVERTED + * @arg @ref LL_SYSCFG_IR_POL_NOT_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetIRPolarity(uint32_t Polarity) +{ + MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_POL, Polarity); +} + +/** + * @brief Get IR Output polarity. + * @rmtoll SYSCFG_CFGR1 IR_POL LL_SYSCFG_GetIRPolarity + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_IR_POL_INVERTED + * @arg @ref LL_SYSCFG_IR_POL_NOT_INVERTED + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetIRPolarity(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_POL)); +} +#endif /* SYSCFG_CFGR1_IR_MOD */ + +#if defined(SYSCFG_CFGR1_BOOSTEN) +/** + * @brief Enable I/O analog switch voltage booster. + * @note When voltage booster is enabled, I/O analog switches are supplied + * by a dedicated voltage booster, from VDD power domain. This is + * the recommended configuration with low VDDA voltage operation. + * @note The I/O analog switch voltage booster is relevant for peripherals + * using I/O in analog input: ADC, COMP. + * However, COMP and OPAMP inputs have a high impedance and + * voltage booster do not impact performance significantly. + * Therefore, the voltage booster is mainly intended for + * usage with ADC. + * @rmtoll SYSCFG_CFGR1 BOOSTEN LL_SYSCFG_EnableAnalogBooster + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableAnalogBooster(void) +{ + SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN); +} + +/** + * @brief Disable I/O analog switch voltage booster. + * @note When voltage booster is enabled, I/O analog switches are supplied + * by a dedicated voltage booster, from VDD power domain. This is + * the recommended configuration with low VDDA voltage operation. + * @note The I/O analog switch voltage booster is relevant for peripherals + * using I/O in analog input: ADC, COMP. + * However, COMP and OPAMP inputs have a high impedance and + * voltage booster do not impact performance significantly. + * Therefore, the voltage booster is mainly intended for + * usage with ADC. + * @rmtoll SYSCFG_CFGR1 BOOSTEN LL_SYSCFG_DisableAnalogBooster + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableAnalogBooster(void) +{ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN); +} +#endif /* SYSCFG_CFGR1_BOOSTEN */ + +/** + * @brief Enable the I2C fast mode plus driving capability. + * @rmtoll SYSCFG_CFGR1 I2C_FMP_PB6 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB7 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB8 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB9 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_I2C1 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_I2C2 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_I2C3 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PA9 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PA10 LL_SYSCFG_EnableFastModePlus + * @param ConfigFastModePlus This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PA9 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PA10 (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + SET_BIT(SYSCFG->CFGR1, ConfigFastModePlus); +} + +/** + * @brief Disable the I2C fast mode plus driving capability. + * @rmtoll SYSCFG_CFGR1 I2C_FMP_PB6 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB7 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB8 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB9 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_I2C1 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_I2C2 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_I2C3 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PA9 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PA10 LL_SYSCFG_DisableFastModePlus + * @param ConfigFastModePlus This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PA9 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PA10 (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + CLEAR_BIT(SYSCFG->CFGR1, ConfigFastModePlus); +} + +#if defined(SYSCFG_CFGR1_UCPD1_STROBE) || defined(SYSCFG_CFGR1_UCPD2_STROBE) +/** + * @brief Disable dead battery behavior + * @rmtoll SYSCFG_CFGR1 UCPD1_STROBE LL_SYSCFG_DisableDBATT\n + * SYSCFG_CFGR1 UCPD2_STROBE LL_SYSCFG_DisableDBATT + * @param ConfigDeadBattery This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_UCPD1_STROBE\n + * @arg @ref LL_SYSCFG_UCPD2_STROBE + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableDBATT(uint32_t ConfigDeadBattery) +{ + SET_BIT(SYSCFG->CFGR1, ConfigDeadBattery); +} +#endif /* SYSCFG_CFGR1_UCPD1_STROBE || SYSCFG_CFGR1_UCPD2_STROBE */ + +#if defined(SYSCFG_ITLINE0_SR_EWDG) +/** + * @brief Check if Window watchdog interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE0 SR_EWDG LL_SYSCFG_IsActiveFlag_WWDG + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_WWDG(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[0], SYSCFG_ITLINE0_SR_EWDG) == (SYSCFG_ITLINE0_SR_EWDG)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE0_SR_EWDG */ + +#if defined (PWR_PVD_SUPPORT) +/** + * @brief Check if PVD supply monitoring interrupt occurred or not (EXTI line 16). + * @rmtoll SYSCFG_ITLINE1 SR_PVDOUT LL_SYSCFG_IsActiveFlag_PVDOUT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_PVDOUT(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[1], SYSCFG_ITLINE1_SR_PVDOUT) == (SYSCFG_ITLINE1_SR_PVDOUT)) ? 1UL : 0UL); +} +#endif /* PWR_PVD_SUPPORT */ + +#if defined (PWR_PVM_SUPPORT) +/** + * @brief Check if VDDUSB supply monitoring interrupt occurred or not (EXTI line 34). + * @rmtoll SYSCFG_ITLINE1 SR_PVMOUT LL_SYSCFG_IsActiveFlag_PVMOUT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_PVMOUT(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[1], SYSCFG_ITLINE1_SR_PVMOUT) == (SYSCFG_ITLINE1_SR_PVMOUT)) ? 1UL : 0UL); +} +#endif /* PWR_PVM_SUPPORT */ + +#if defined(SYSCFG_ITLINE2_SR_RTC) +/** + * @brief Check if RTC Wake Up interrupt occurred or not (EXTI line 19). + * @rmtoll SYSCFG_ITLINE2 SR_RTC_WAKEUP LL_SYSCFG_IsActiveFlag_RTC_WAKEUP + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_RTC_WAKEUP(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[2], SYSCFG_ITLINE2_SR_RTC) == (SYSCFG_ITLINE2_SR_RTC)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE2_SR_RTC */ + +#if defined(SYSCFG_ITLINE2_SR_TAMPER) +/** + * @brief Check if RTC Tamper and TimeStamp interrupt occurred or not (EXTI line 21). + * @rmtoll SYSCFG_ITLINE2 SR_TAMPER LL_SYSCFG_IsActiveFlag_TAMPER + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TAMPER(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[2], SYSCFG_ITLINE2_SR_TAMPER) == (SYSCFG_ITLINE2_SR_TAMPER)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE2_SR_TAMPER */ + +#if defined(SYSCFG_ITLINE3_SR_FLASH_ITF) +/** + * @brief Check if Flash interface interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE3 SR_FLASH_ITF LL_SYSCFG_IsActiveFlag_FLASH_ITF + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_FLASH_ITF(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[3], SYSCFG_ITLINE3_SR_FLASH_ITF) == (SYSCFG_ITLINE3_SR_FLASH_ITF)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE3_SR_FLASH_ITF */ + +#if defined(SYSCFG_ITLINE3_SR_FLASH_ECC) +/** + * @brief Check if Flash interface interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE3 SR_FLASH_ECC LL_SYSCFG_IsActiveFlag_FLASH_ECC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_FLASH_ECC(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[3], SYSCFG_ITLINE3_SR_FLASH_ECC) == (SYSCFG_ITLINE3_SR_FLASH_ECC)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE3_SR_FLASH_ECC */ + +#if defined(SYSCFG_ITLINE4_SR_CLK_CTRL) +/** + * @brief Check if Reset and clock control interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE4 SR_CLK_CTRL LL_SYSCFG_IsActiveFlag_CLK_CTRL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CLK_CTRL(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[4], SYSCFG_ITLINE4_SR_CLK_CTRL) == (SYSCFG_ITLINE4_SR_CLK_CTRL)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE4_SR_CLK_CTRL */ + +#if defined(CRS) +/** + * @brief Check if Reset and clock control interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE4 SR_CRS LL_SYSCFG_IsActiveFlag_CRS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CRS(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[4], SYSCFG_ITLINE4_SR_CRS) == (SYSCFG_ITLINE4_SR_CRS)) ? 1UL : 0UL); +} +#endif /* CRS */ +#if defined(SYSCFG_ITLINE5_SR_EXTI0) +/** + * @brief Check if EXTI line 0 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE5 SR_EXTI0 LL_SYSCFG_IsActiveFlag_EXTI0 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI0(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[5], SYSCFG_ITLINE5_SR_EXTI0) == (SYSCFG_ITLINE5_SR_EXTI0)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE5_SR_EXTI0 */ + +#if defined(SYSCFG_ITLINE5_SR_EXTI1) +/** + * @brief Check if EXTI line 1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE5 SR_EXTI1 LL_SYSCFG_IsActiveFlag_EXTI1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[5], SYSCFG_ITLINE5_SR_EXTI1) == (SYSCFG_ITLINE5_SR_EXTI1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE5_SR_EXTI1 */ + +#if defined(SYSCFG_ITLINE6_SR_EXTI2) +/** + * @brief Check if EXTI line 2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE6 SR_EXTI2 LL_SYSCFG_IsActiveFlag_EXTI2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[6], SYSCFG_ITLINE6_SR_EXTI2) == (SYSCFG_ITLINE6_SR_EXTI2)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE6_SR_EXTI2 */ + +#if defined(SYSCFG_ITLINE6_SR_EXTI3) +/** + * @brief Check if EXTI line 3 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE6 SR_EXTI3 LL_SYSCFG_IsActiveFlag_EXTI3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI3(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[6], SYSCFG_ITLINE6_SR_EXTI3) == (SYSCFG_ITLINE6_SR_EXTI3)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE6_SR_EXTI3 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI4) +/** + * @brief Check if EXTI line 4 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI4 LL_SYSCFG_IsActiveFlag_EXTI4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI4(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI4) == (SYSCFG_ITLINE7_SR_EXTI4)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI4 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI5) +/** + * @brief Check if EXTI line 5 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI5 LL_SYSCFG_IsActiveFlag_EXTI5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI5(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI5) == (SYSCFG_ITLINE7_SR_EXTI5)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI5 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI6) +/** + * @brief Check if EXTI line 6 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI6 LL_SYSCFG_IsActiveFlag_EXTI6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI6(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI6) == (SYSCFG_ITLINE7_SR_EXTI6)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI6 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI7) +/** + * @brief Check if EXTI line 7 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI7 LL_SYSCFG_IsActiveFlag_EXTI7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI7(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI7) == (SYSCFG_ITLINE7_SR_EXTI7)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI7 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI8) +/** + * @brief Check if EXTI line 8 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI8 LL_SYSCFG_IsActiveFlag_EXTI8 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI8(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI8) == (SYSCFG_ITLINE7_SR_EXTI8)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI8 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI9) +/** + * @brief Check if EXTI line 9 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI9 LL_SYSCFG_IsActiveFlag_EXTI9 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI9(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI9) == (SYSCFG_ITLINE7_SR_EXTI9)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI9 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI10) +/** + * @brief Check if EXTI line 10 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI10 LL_SYSCFG_IsActiveFlag_EXTI10 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI10(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI10) == (SYSCFG_ITLINE7_SR_EXTI10)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI10 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI11) +/** + * @brief Check if EXTI line 11 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI11 LL_SYSCFG_IsActiveFlag_EXTI11 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI11(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI11) == (SYSCFG_ITLINE7_SR_EXTI11)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI11 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI12) +/** + * @brief Check if EXTI line 12 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI12 LL_SYSCFG_IsActiveFlag_EXTI12 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI12(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI12) == (SYSCFG_ITLINE7_SR_EXTI12)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI12 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI13) +/** + * @brief Check if EXTI line 13 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI13 LL_SYSCFG_IsActiveFlag_EXTI13 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI13(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI13) == (SYSCFG_ITLINE7_SR_EXTI13)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI13 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI14) +/** + * @brief Check if EXTI line 14 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI14 LL_SYSCFG_IsActiveFlag_EXTI14 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI14(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI14) == (SYSCFG_ITLINE7_SR_EXTI14)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI14 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI15) +/** + * @brief Check if EXTI line 15 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI15 LL_SYSCFG_IsActiveFlag_EXTI15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI15(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI15) == (SYSCFG_ITLINE7_SR_EXTI15)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI15 */ + +#if defined(SYSCFG_ITLINE8_SR_UCPD1) +/** + * @brief Check if UCPD1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE8 SR_UCPD1 LL_SYSCFG_IsActiveFlag_UCPD1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_UCPD1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[8], SYSCFG_ITLINE8_SR_UCPD1) == (SYSCFG_ITLINE8_SR_UCPD1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE8_SR_UCPD1 */ + +#if defined(SYSCFG_ITLINE8_SR_UCPD2) +/** + * @brief Check if UCPD2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE8 SR_UCPD2 LL_SYSCFG_IsActiveFlag_UCPD2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_UCPD2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[8], SYSCFG_ITLINE8_SR_UCPD2) == (SYSCFG_ITLINE8_SR_UCPD2)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE8_SR_UCPD2 */ + +#if defined(SYSCFG_ITLINE8_SR_USB) +/** + * @brief Check if USB interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE8 SR_USB LL_SYSCFG_IsActiveFlag_USB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USB(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[8], SYSCFG_ITLINE8_SR_USB) == (SYSCFG_ITLINE8_SR_USB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE8_SR_USB */ + +#if defined(SYSCFG_ITLINE9_SR_DMA1_CH1) +/** + * @brief Check if DMA1 channel 1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE9 SR_DMA1_CH1 LL_SYSCFG_IsActiveFlag_DMA1_CH1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[9], SYSCFG_ITLINE9_SR_DMA1_CH1) == (SYSCFG_ITLINE9_SR_DMA1_CH1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE9_SR_DMA1_CH1 */ + +#if defined(SYSCFG_ITLINE10_SR_DMA1_CH2) +/** + * @brief Check if DMA1 channel 2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE10 SR_DMA1_CH2 LL_SYSCFG_IsActiveFlag_DMA1_CH2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[10], SYSCFG_ITLINE10_SR_DMA1_CH2) == (SYSCFG_ITLINE10_SR_DMA1_CH2)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE10_SR_DMA1_CH2 */ + +#if defined(SYSCFG_ITLINE10_SR_DMA1_CH3) +/** + * @brief Check if DMA1 channel 3 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE10 SR_DMA1_CH3 LL_SYSCFG_IsActiveFlag_DMA1_CH3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH3(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[10], SYSCFG_ITLINE10_SR_DMA1_CH3) == (SYSCFG_ITLINE10_SR_DMA1_CH3)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE10_SR_DMA1_CH3 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA1_CH4) +/** + * @brief Check if DMA1 channel 4 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA1_CH4 LL_SYSCFG_IsActiveFlag_DMA1_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH4(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA1_CH4) == (SYSCFG_ITLINE11_SR_DMA1_CH4)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE11_SR_DMA1_CH4 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA1_CH5) +/** + * @brief Check if DMA1 channel 5 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA1_CH5 LL_SYSCFG_IsActiveFlag_DMA1_CH5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH5(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA1_CH5) == (SYSCFG_ITLINE11_SR_DMA1_CH5)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE11_SR_DMA1_CH5 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA1_CH6) +/** + * @brief Check if DMA1 channel 6 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA1_CH6 LL_SYSCFG_IsActiveFlag_DMA1_CH6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH6(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA1_CH6) == (SYSCFG_ITLINE11_SR_DMA1_CH6)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE11_SR_DMA1_CH6 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA1_CH7) +/** + * @brief Check if DMA1 channel 7 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA1_CH7 LL_SYSCFG_IsActiveFlag_DMA1_CH7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH7(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA1_CH7) == (SYSCFG_ITLINE11_SR_DMA1_CH7)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE11_SR_DMA1_CH7 */ + +#if defined(SYSCFG_ITLINE11_SR_DMAMUX1) +/** + * @brief Check if DMAMUX interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMAMUX1 LL_SYSCFG_IsActiveFlag_DMAMUX + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMAMUX(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMAMUX1) == (SYSCFG_ITLINE11_SR_DMAMUX1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE11_SR_DMAMUX */ + +#if defined(SYSCFG_ITLINE11_SR_DMA2_CH1) +/** + * @brief Check if DMA2_CH1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA2_CH1 LL_SYSCFG_IsActiveFlag_DMA2_CH1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA2_CH1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA2_CH1) == (SYSCFG_ITLINE11_SR_DMA2_CH1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE11_SR_DMA2_CH1 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA2_CH2) +/** + * @brief Check if DMA2_CH2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA2_CH2 LL_SYSCFG_IsActiveFlag_DMA2_CH2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA2_CH2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA2_CH2) == (SYSCFG_ITLINE11_SR_DMA2_CH2)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE11_SR_DMA2_CH2 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA2_CH3) +/** + * @brief Check if DMA2_CH3 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA2_CH3 LL_SYSCFG_IsActiveFlag_DMA2_CH3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA2_CH3(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA2_CH3) == (SYSCFG_ITLINE11_SR_DMA2_CH3)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE11_SR_DMA2_CH3 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA2_CH4) +/** + * @brief Check if DMA2_CH4 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA2_CH4 LL_SYSCFG_IsActiveFlag_DMA2_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA2_CH4(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA2_CH4) == (SYSCFG_ITLINE11_SR_DMA2_CH4)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE11_SR_DMA2_CH4 */ + +#if defined(SYSCFG_ITLINE11_SR_DMA2_CH5) +/** + * @brief Check if DMA2_CH5 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMA2_CH5 LL_SYSCFG_IsActiveFlag_DMA2_CH5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA2_CH5(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA2_CH5) == (SYSCFG_ITLINE11_SR_DMA2_CH5)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE11_SR_DMA2_CH5 */ + +#if defined(SYSCFG_ITLINE12_SR_ADC) +/** + * @brief Check if ADC interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE12 SR_ADC LL_SYSCFG_IsActiveFlag_ADC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_ADC(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[12], SYSCFG_ITLINE12_SR_ADC) == (SYSCFG_ITLINE12_SR_ADC)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE12_SR_ADC */ + +#if defined(SYSCFG_ITLINE12_SR_COMP1) +/** + * @brief Check if Comparator 1 interrupt occurred or not (EXTI line 17). + * @rmtoll SYSCFG_ITLINE12 SR_COMP1 LL_SYSCFG_IsActiveFlag_COMP1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_COMP1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[12], SYSCFG_ITLINE12_SR_COMP1) == (SYSCFG_ITLINE12_SR_COMP1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE12_SR_COMP1 */ + +#if defined(SYSCFG_ITLINE12_SR_COMP2) +/** + * @brief Check if Comparator 2 interrupt occurred or not (EXTI line 18). + * @rmtoll SYSCFG_ITLINE12 SR_COMP2 LL_SYSCFG_IsActiveFlag_COMP2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_COMP2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[12], SYSCFG_ITLINE12_SR_COMP2) == (SYSCFG_ITLINE12_SR_COMP2)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE12_SR_COMP2 */ + +#if defined(SYSCFG_ITLINE12_SR_COMP3) +/** + * @brief Check if Comparator 3 interrupt occurred or not (EXTI line 20). + * @rmtoll SYSCFG_ITLINE12 SR_COMP3 LL_SYSCFG_IsActiveFlag_COMP3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_COMP3(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[12], SYSCFG_ITLINE12_SR_COMP3) == (SYSCFG_ITLINE12_SR_COMP3)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE12_SR_COMP3 */ + +#if defined(SYSCFG_ITLINE13_SR_TIM1_BRK) +/** + * @brief Check if Timer 1 break interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE13 SR_TIM1_BRK LL_SYSCFG_IsActiveFlag_TIM1_BRK + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_BRK(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[13], SYSCFG_ITLINE13_SR_TIM1_BRK) == (SYSCFG_ITLINE13_SR_TIM1_BRK)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE13_SR_TIM1_BRK */ + +#if defined(SYSCFG_ITLINE13_SR_TIM1_UPD) +/** + * @brief Check if Timer 1 update interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE13 SR_TIM1_UPD LL_SYSCFG_IsActiveFlag_TIM1_UPD + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_UPD(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[13], SYSCFG_ITLINE13_SR_TIM1_UPD) == (SYSCFG_ITLINE13_SR_TIM1_UPD)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE13_SR_TIM1_UPD */ + +#if defined(SYSCFG_ITLINE13_SR_TIM1_TRG) +/** + * @brief Check if Timer 1 trigger interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE13 SR_TIM1_TRG LL_SYSCFG_IsActiveFlag_TIM1_TRG + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_TRG(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[13], SYSCFG_ITLINE13_SR_TIM1_TRG) == (SYSCFG_ITLINE13_SR_TIM1_TRG)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE13_SR_TIM1_TRG */ + +#if defined(SYSCFG_ITLINE13_SR_TIM1_CCU) +/** + * @brief Check if Timer 1 commutation interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE13 SR_TIM1_CCU LL_SYSCFG_IsActiveFlag_TIM1_CCU + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_CCU(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[13], SYSCFG_ITLINE13_SR_TIM1_CCU) == (SYSCFG_ITLINE13_SR_TIM1_CCU)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE13_SR_TIM1_CCU */ + +#if defined(SYSCFG_ITLINE14_SR_TIM1_CC) +/** + * @brief Check if Timer 1 capture compare interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE14 SR_TIM1_CC LL_SYSCFG_IsActiveFlag_TIM1_CC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_CC(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[14], SYSCFG_ITLINE14_SR_TIM1_CC) == (SYSCFG_ITLINE14_SR_TIM1_CC)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE14_SR_TIM1_CC */ + +#if defined(SYSCFG_ITLINE15_SR_TIM2_GLB) +/** + * @brief Check if Timer 2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE15 SR_TIM2_GLB LL_SYSCFG_IsActiveFlag_TIM2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[15], SYSCFG_ITLINE15_SR_TIM2_GLB) == (SYSCFG_ITLINE15_SR_TIM2_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE15_SR_TIM2_GLB */ + +#if defined(SYSCFG_ITLINE16_SR_TIM3_GLB) +/** + * @brief Check if Timer 3 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE16 SR_TIM3_GLB LL_SYSCFG_IsActiveFlag_TIM3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM3(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[16], SYSCFG_ITLINE16_SR_TIM3_GLB) == (SYSCFG_ITLINE16_SR_TIM3_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE16_SR_TIM3_GLB */ + +#if defined(SYSCFG_ITLINE16_SR_TIM4_GLB) +/** + * @brief Check if Timer 3 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE16 SR_TIM4_GLB LL_SYSCFG_IsActiveFlag_TIM4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM4(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[16], SYSCFG_ITLINE16_SR_TIM4_GLB) == (SYSCFG_ITLINE16_SR_TIM4_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE16_SR_TIM4_GLB */ + +#if defined(SYSCFG_ITLINE17_SR_DAC) +/** + * @brief Check if DAC underrun interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE17 SR_DAC LL_SYSCFG_IsActiveFlag_DAC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DAC(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[17], SYSCFG_ITLINE17_SR_DAC) == (SYSCFG_ITLINE17_SR_DAC)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE17_SR_DAC */ + +#if defined(SYSCFG_ITLINE17_SR_TIM6_GLB) +/** + * @brief Check if Timer 6 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE17 SR_TIM6_GLB LL_SYSCFG_IsActiveFlag_TIM6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM6(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[17], SYSCFG_ITLINE17_SR_TIM6_GLB) == (SYSCFG_ITLINE17_SR_TIM6_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE17_SR_TIM6_GLB */ + +#if defined(SYSCFG_ITLINE17_SR_LPTIM1_GLB) +/** + * @brief Check if LPTIM1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE17 SR_LPTIM1_GLB LL_SYSCFG_IsActiveFlag_LPTIM1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_LPTIM1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[17], SYSCFG_ITLINE17_SR_LPTIM1_GLB) == (SYSCFG_ITLINE17_SR_LPTIM1_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE17_SR_LPTIM1_GLB */ + +#if defined(SYSCFG_ITLINE18_SR_TIM7_GLB) +/** + * @brief Check if Timer 7 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE18 SR_TIM7_GLB LL_SYSCFG_IsActiveFlag_TIM7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM7(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[18], SYSCFG_ITLINE18_SR_TIM7_GLB) == (SYSCFG_ITLINE18_SR_TIM7_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE18_SR_TIM7_GLB */ + +#if defined(SYSCFG_ITLINE18_SR_LPTIM2_GLB) +/** + * @brief Check if LPTIM2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE18 SR_LPTIM2_GLB LL_SYSCFG_IsActiveFlag_LPTIM2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_LPTIM2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[18], SYSCFG_ITLINE18_SR_LPTIM2_GLB) == (SYSCFG_ITLINE18_SR_LPTIM2_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE18_SR_LPTIM2_GLB */ + +#if defined(SYSCFG_ITLINE19_SR_TIM14_GLB) +/** + * @brief Check if Timer 14 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE19 SR_TIM14_GLB LL_SYSCFG_IsActiveFlag_TIM14 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM14(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[19], SYSCFG_ITLINE19_SR_TIM14_GLB) == (SYSCFG_ITLINE19_SR_TIM14_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE19_SR_TIM14_GLB */ + +#if defined(SYSCFG_ITLINE20_SR_TIM15_GLB) +/** + * @brief Check if Timer 15 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE20 SR_TIM15_GLB LL_SYSCFG_IsActiveFlag_TIM15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM15(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[20], SYSCFG_ITLINE20_SR_TIM15_GLB) == (SYSCFG_ITLINE20_SR_TIM15_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE20_SR_TIM15_GLB */ + +#if defined(SYSCFG_ITLINE21_SR_TIM16_GLB) +/** + * @brief Check if Timer 16 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE21 SR_TIM16_GLB LL_SYSCFG_IsActiveFlag_TIM16 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM16(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[21], SYSCFG_ITLINE21_SR_TIM16_GLB) == (SYSCFG_ITLINE21_SR_TIM16_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE21_SR_TIM16_GLB */ + +#if defined(SYSCFG_ITLINE21_SR_FDCAN1_IT0) +/** + * @brief Check if FDCAN1_IT0 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE21 SR_FDCAN1_IT0 LL_SYSCFG_IsActiveFlag_FDCAN1_IT0 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_FDCAN1_IT0(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[21], SYSCFG_ITLINE21_SR_FDCAN1_IT0) == (SYSCFG_ITLINE21_SR_FDCAN1_IT0)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE21_SR_FDCAN1_IT0 */ +#if defined(SYSCFG_ITLINE21_SR_FDCAN2_IT0) +/** + * @brief Check if FDCAN2_IT0 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE21 SR_FDCAN2_IT0 LL_SYSCFG_IsActiveFlag_FDCAN2_IT0 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_FDCAN2_IT0(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[21], SYSCFG_ITLINE21_SR_FDCAN2_IT0) == (SYSCFG_ITLINE21_SR_FDCAN2_IT0)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE21_SR_FDCAN2_IT0 */ + +#if defined(SYSCFG_ITLINE22_SR_TIM17_GLB) +/** + * @brief Check if Timer 17 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE22 SR_TIM17_GLB LL_SYSCFG_IsActiveFlag_TIM17 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM17(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[22], SYSCFG_ITLINE22_SR_TIM17_GLB) == (SYSCFG_ITLINE22_SR_TIM17_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE22_SR_TIM17_GLB */ + +#if defined(SYSCFG_ITLINE22_SR_FDCAN1_IT1) +/** + * @brief Check if FDCAN1_IT1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE22 SR_FDCAN1_IT1 LL_SYSCFG_IsActiveFlag_FDCAN1_IT1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_FDCAN1_IT1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[22], SYSCFG_ITLINE22_SR_FDCAN1_IT1) == (SYSCFG_ITLINE22_SR_FDCAN1_IT1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE22_SR_FDCAN1_IT1 */ +#if defined(SYSCFG_ITLINE22_SR_FDCAN2_IT1) +/** + * @brief Check if FDCAN2_IT1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE22 SR_FDCAN2_IT1 LL_SYSCFG_IsActiveFlag_FDCAN2_IT1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_FDCAN2_IT1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[22], SYSCFG_ITLINE22_SR_FDCAN2_IT1) == (SYSCFG_ITLINE22_SR_FDCAN2_IT1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE22_SR_FDCAN2_IT1 */ + +#if defined(SYSCFG_ITLINE23_SR_I2C1_GLB) +/** + * @brief Check if I2C1 interrupt occurred or not, combined with EXTI line 23. + * @rmtoll SYSCFG_ITLINE23 SR_I2C1_GLB LL_SYSCFG_IsActiveFlag_I2C1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_I2C1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[23], SYSCFG_ITLINE23_SR_I2C1_GLB) == (SYSCFG_ITLINE23_SR_I2C1_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE23_SR_I2C1_GLB */ + +#if defined(SYSCFG_ITLINE24_SR_I2C2_GLB) +/** + * @brief Check if I2C2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE24 SR_I2C2_GLB LL_SYSCFG_IsActiveFlag_I2C2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_I2C2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[24], SYSCFG_ITLINE24_SR_I2C2_GLB) == (SYSCFG_ITLINE24_SR_I2C2_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE24_SR_I2C2_GLB */ + +#if defined(SYSCFG_ITLINE24_SR_I2C3_GLB) +/** + * @brief Check if I2C3 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE24 SR_I2C3_GLB LL_SYSCFG_IsActiveFlag_I2C3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_I2C3(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[24], SYSCFG_ITLINE24_SR_I2C3_GLB) == (SYSCFG_ITLINE24_SR_I2C3_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE24_SR_I2C3_GLB */ + +#if defined(SYSCFG_ITLINE25_SR_SPI1) +/** + * @brief Check if SPI1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE25 SR_SPI1 LL_SYSCFG_IsActiveFlag_SPI1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_SPI1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[25], SYSCFG_ITLINE25_SR_SPI1) == (SYSCFG_ITLINE25_SR_SPI1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE25_SR_SPI1 */ + +#if defined(SYSCFG_ITLINE26_SR_SPI2) +/** + * @brief Check if SPI2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE26 SR_SPI2 LL_SYSCFG_IsActiveFlag_SPI2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_SPI2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[26], SYSCFG_ITLINE26_SR_SPI2) == (SYSCFG_ITLINE26_SR_SPI2)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE26_SR_SPI2 */ + +#if defined(SYSCFG_ITLINE26_SR_SPI3) +/** + * @brief Check if SPI3 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE26 SR_SPI3 LL_SYSCFG_IsActiveFlag_SPI3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_SPI3(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[26], SYSCFG_ITLINE26_SR_SPI3) == (SYSCFG_ITLINE26_SR_SPI3)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE26_SR_SPI3 */ + +#if defined(SYSCFG_ITLINE27_SR_USART1_GLB) +/** + * @brief Check if USART1 interrupt occurred or not, combined with EXTI line 25. + * @rmtoll SYSCFG_ITLINE27 SR_USART1_GLB LL_SYSCFG_IsActiveFlag_USART1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[27], SYSCFG_ITLINE27_SR_USART1_GLB) == (SYSCFG_ITLINE27_SR_USART1_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE27_SR_USART1_GLB */ + +#if defined(SYSCFG_ITLINE28_SR_USART2_GLB) +/** + * @brief Check if USART2 interrupt occurred or not, combined with EXTI line 26. + * @rmtoll SYSCFG_ITLINE28 SR_USART2_GLB LL_SYSCFG_IsActiveFlag_USART2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[28], SYSCFG_ITLINE28_SR_USART2_GLB) == (SYSCFG_ITLINE28_SR_USART2_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE28_SR_USART2_GLB */ + +#if defined(SYSCFG_ITLINE28_SR_LPUART2_GLB) +/** + * @brief Check if LPUART2 interrupt occurred or not, combined with EXTI line 26. + * @rmtoll SYSCFG_ITLINE28 SR_LPUART2_GLB LL_SYSCFG_IsActiveFlag_LPUART2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_LPUART2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[28], SYSCFG_ITLINE28_SR_LPUART2_GLB) == (SYSCFG_ITLINE28_SR_LPUART2_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE28_SR_LPUART2_GLB */ + +#if defined(SYSCFG_ITLINE29_SR_USART3_GLB) +/** + * @brief Check if USART3 interrupt occurred or not, combined with EXTI line 28. + * @rmtoll SYSCFG_ITLINE29 SR_USART3_GLB LL_SYSCFG_IsActiveFlag_USART3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART3(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_USART3_GLB) == (SYSCFG_ITLINE29_SR_USART3_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE29_SR_USART3_GLB */ + +#if defined(SYSCFG_ITLINE29_SR_USART4_GLB) +/** + * @brief Check if USART4 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE29 SR_USART4_GLB LL_SYSCFG_IsActiveFlag_USART4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART4(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_USART4_GLB) == (SYSCFG_ITLINE29_SR_USART4_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE29_SR_USART4_GLB */ + +#if defined(SYSCFG_ITLINE29_SR_LPUART1_GLB) +/** + * @brief Check if LPUART1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE29 SR_LPUART1_GLB LL_SYSCFG_IsActiveFlag_LPUART1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_LPUART1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_LPUART1_GLB) == (SYSCFG_ITLINE29_SR_LPUART1_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE29_SR_LPUART1_GLB */ + +#if defined(SYSCFG_ITLINE29_SR_USART5_GLB) +/** + * @brief Check if USART5 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE29 SR_USART5_GLB LL_SYSCFG_IsActiveFlag_USART5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART5(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_USART5_GLB) == (SYSCFG_ITLINE29_SR_USART5_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE29_SR_USART5_GLB */ + +#if defined(SYSCFG_ITLINE29_SR_USART6_GLB) +/** + * @brief Check if USART6 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE29 SR_USART6_GLB LL_SYSCFG_IsActiveFlag_USART6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART6(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_USART6_GLB) == (SYSCFG_ITLINE29_SR_USART6_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE29_SR_USART6_GLB */ + +#if defined(SYSCFG_ITLINE30_SR_CEC) +/** + * @brief Check if CEC interrupt occurred or not, combined with EXTI line 27. + * @rmtoll SYSCFG_ITLINE30 SR_CEC LL_SYSCFG_IsActiveFlag_CEC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CEC(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[30], SYSCFG_ITLINE30_SR_CEC) == (SYSCFG_ITLINE30_SR_CEC)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE30_SR_CEC */ + +#if defined(SYSCFG_ITLINE31_SR_AES) +/** + * @brief Check if AES interrupt occurred or not + * @rmtoll SYSCFG_ITLINE31 SR_AES LL_SYSCFG_IsActiveFlag_AES + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_AES(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[31], SYSCFG_ITLINE31_SR_AES) == (SYSCFG_ITLINE31_SR_AES)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE31_SR_AES */ + +#if defined(SYSCFG_ITLINE31_SR_RNG) +/** + * @brief Check if RNG interrupt occurred or not, combined with EXTI line 31. + * @rmtoll SYSCFG_ITLINE31 SR_RNG LL_SYSCFG_IsActiveFlag_RNG + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_RNG(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[31], SYSCFG_ITLINE31_SR_RNG) == (SYSCFG_ITLINE31_SR_RNG)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE31_SR_RNG */ + +/** + * @brief Set connections to TIM1/15/16/17 Break inputs + * @rmtoll SYSCFG_CFGR2 CLL LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR2 SPL LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR2 PVDL LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR2 ECCL LL_SYSCFG_GetTIMBreakInputs + * @param Break This parameter can be a combination of the following values: + * @ifnot STM32G070xx + * @arg @ref LL_SYSCFG_TIMBREAK_PVD (*) + * @endif + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM_PARITY + * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP + * @arg @ref LL_SYSCFG_TIMBREAK_ECC + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetTIMBreakInputs(uint32_t Break) +{ +#if defined(SYSCFG_CFGR2_PVDL) + MODIFY_REG(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL | SYSCFG_CFGR2_SPL | SYSCFG_CFGR2_PVDL | SYSCFG_CFGR2_ECCL, Break); +#else + MODIFY_REG(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL | SYSCFG_CFGR2_SPL | SYSCFG_CFGR2_ECCL, Break); +#endif /*SYSCFG_CFGR2_PVDL*/ +} + +/** + * @brief Get connections to TIM1/15/16/17 Break inputs + * @rmtoll SYSCFG_CFGR2 CLL LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR2 SPL LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR2 PVDL LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR2 ECCL LL_SYSCFG_GetTIMBreakInputs + * @retval Returned value can be can be a combination of the following values: + * @ifnot STM32G070xx + * @arg @ref LL_SYSCFG_TIMBREAK_PVD (*) + * @endif + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM_PARITY + * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP + * @arg @ref LL_SYSCFG_TIMBREAK_ECC + * + * (*) value not defined in all devices + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetTIMBreakInputs(void) +{ +#if defined(SYSCFG_CFGR2_PVDL) + return (uint32_t)(READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL | SYSCFG_CFGR2_SPL | SYSCFG_CFGR2_PVDL | SYSCFG_CFGR2_ECCL)); +#else + return (uint32_t)(READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL | SYSCFG_CFGR2_SPL | SYSCFG_CFGR2_ECCL)); +#endif /*SYSCFG_CFGR2_PVDL*/ +} + +/** + * @brief Check if SRAM parity error detected + * @rmtoll SYSCFG_CFGR2 SPF LL_SYSCFG_IsActiveFlag_SP + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_SP(void) +{ + return ((READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPF) == (SYSCFG_CFGR2_SPF)) ? 1UL : 0UL); +} + +/** + * @brief Clear SRAM parity error flag + * @rmtoll SYSCFG_CFGR2 SPF LL_SYSCFG_ClearFlag_SP + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_ClearFlag_SP(void) +{ + SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPF); +} + +#if defined(SYSCFG_CDEN_SUPPORT) +/** + * @brief Enable Clamping Diode on specific pin + * @rmtoll SYSCFG_CFGR2 PA1_CDEN LL_SYSCFG_EnableClampingDiode\n + * SYSCFG_CFGR2 PA3_CDEN LL_SYSCFG_EnableClampingDiode\n + * SYSCFG_CFGR2 PA5_CDEN LL_SYSCFG_EnableClampingDiode\n + * SYSCFG_CFGR2 PA6_CDEN LL_SYSCFG_EnableClampingDiode\n + * SYSCFG_CFGR2 PA13_CDEN LL_SYSCFG_EnableClampingDiode\n + * SYSCFG_CFGR2 PB0_CDEN LL_SYSCFG_EnableClampingDiode\n + * SYSCFG_CFGR2 PB1_CDEN LL_SYSCFG_EnableClampingDiode\n + * SYSCFG_CFGR1 PB2_CDEN LL_SYSCFG_EnableClampingDiode + * @param ConfigClampingDiode This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_CFGR2_PA1_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA3_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA5_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA6_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA13_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PB0_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PB1_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PB2_CDEN + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableClampingDiode(uint32_t ConfigClampingDiode) +{ + SET_BIT(SYSCFG->CFGR2, ConfigClampingDiode); +} + +/** + * @brief Disable Clamping Diode on specific pin + * @rmtoll SYSCFG_CFGR2 PA1_CDEN LL_SYSCFG_DisableClampingDiode\n + * SYSCFG_CFGR2 PA3_CDEN LL_SYSCFG_DisableClampingDiode\n + * SYSCFG_CFGR2 PA5_CDEN LL_SYSCFG_DisableClampingDiode\n + * SYSCFG_CFGR2 PA6_CDEN LL_SYSCFG_DisableClampingDiode\n + * SYSCFG_CFGR2 PA13_CDEN LL_SYSCFG_DisableClampingDiode\n + * SYSCFG_CFGR2 PB0_CDEN LL_SYSCFG_DisableClampingDiode\n + * SYSCFG_CFGR2 PB1_CDEN LL_SYSCFG_DisableClampingDiode\n + * SYSCFG_CFGR1 PB2_CDEN LL_SYSCFG_DisableClampingDiode + * @param ConfigClampingDiode This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_CFGR2_PA1_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA3_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA5_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA6_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA13_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PB0_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PB1_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PB2_CDEN + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableClampingDiode(uint32_t ConfigClampingDiode) +{ + CLEAR_BIT(SYSCFG->CFGR2, ConfigClampingDiode); +} +/** + * @brief Indicates whether clamping diode(s) is(are) enabled. + * @rmtoll SYSCFG_CFGR2 PA1_CDEN LL_SYSCFG_IsEnabledClampingDiode\n + * SYSCFG_CFGR2 PA3_CDEN LL_SYSCFG_IsEnabledClampingDiode\n + * SYSCFG_CFGR2 PA5_CDEN LL_SYSCFG_IsEnabledClampingDiode\n + * SYSCFG_CFGR2 PA6_CDEN LL_SYSCFG_IsEnabledClampingDiode\n + * SYSCFG_CFGR2 PA13_CDEN LL_SYSCFG_IsEnabledClampingDiode\n + * SYSCFG_CFGR2 PB0_CDEN LL_SYSCFG_IsEnabledClampingDiode\n + * SYSCFG_CFGR2 PB1_CDEN LL_SYSCFG_IsEnabledClampingDiode\n + * SYSCFG_CFGR1 PB2_CDEN LL_SYSCFG_IsEnabledClampingDiode + * @param ConfigClampingDiode This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_CFGR2_PA1_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA3_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA5_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA6_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PA13_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PB0_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PB1_CDEN + * @arg @ref LL_SYSCFG_CFGR2_PB2_CDEN + * @retval None + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledClampingDiode(uint32_t ConfigClampingDiode) +{ + return ((READ_BIT(SYSCFG->CFGR2, ConfigClampingDiode) == (ConfigClampingDiode)) ? 1UL : 0UL); +} +#endif /* SYSCFG_CDEN_SUPPORT */ + +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU + * @{ + */ + +/** + * @brief Return the device identifier + * @note For STM32G081xx devices, the device ID is 0x460 + * @rmtoll DBG_IDCODE DEV_ID LL_DBGMCU_GetDeviceID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void) +{ + return (uint32_t)(READ_BIT(DBG->IDCODE, DBG_IDCODE_DEV_ID)); +} + +/** + * @brief Return the device revision identifier + * @note This field indicates the revision of the device. + * @rmtoll DBG_IDCODE REV_ID LL_DBGMCU_GetRevisionID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void) +{ + return (uint32_t)(READ_BIT(DBG->IDCODE, DBG_IDCODE_REV_ID) >> DBG_IDCODE_REV_ID_Pos); +} + +/** + * @brief Enable the Debug Module during STOP mode + * @rmtoll DBG_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBG->CR, DBG_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode + * @rmtoll DBG_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBG->CR, DBG_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during STANDBY mode + * @rmtoll DBG_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBG->CR, DBG_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode + * @rmtoll DBG_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBG->CR, DBG_CR_DBG_STANDBY); +} + +/** + * @brief Freeze APB1 peripherals (group1 peripherals) + * @rmtoll DBG_APB_FZ1 DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_I2C1_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_I2C2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_LPTIM2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_LPTIM1_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBG->APBFZ1, Periphs); +} + +/** + * @brief Unfreeze APB1 peripherals (group1 peripherals) + * @rmtoll DBG_APB_FZ1 DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_LPTIM2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_LPTIM1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBG->APBFZ1, Periphs); +} + +/** + * @brief Freeze APB2 peripherals + * @rmtoll DBG_APB_FZ2 DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBG_APB_FZ2 DBG_TIM14_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBG_APB_FZ2 DBG_TIM15_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBG_APB_FZ2 DBG_TIM16_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBG_APB_FZ2 DBG_TIM17_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM14_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBG->APBFZ2, Periphs); +} + +/** + * @brief Unfreeze APB2 peripherals + * @rmtoll DBG_APB_FZ2 DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n + * DBG_APB_FZ2 DBG_TIM14_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n + * DBG_APB_FZ2 DBG_TIM15_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n + * DBG_APB_FZ2 DBG_TIM16_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n + * DBG_APB_FZ2 DBG_TIM17_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM14_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBG->APBFZ2, Periphs); +} +/** + * @} + */ + +#if defined(VREFBUF) +/** @defgroup SYSTEM_LL_EF_VREFBUF VREFBUF + * @{ + */ + +/** + * @brief Enable Internal voltage reference + * @rmtoll VREFBUF_CSR VREFBUF_CSR_ENVR LL_VREFBUF_Enable + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_Enable(void) +{ + SET_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); +} + +/** + * @brief Disable Internal voltage reference + * @rmtoll VREFBUF_CSR VREFBUF_CSR_ENVR LL_VREFBUF_Disable + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_Disable(void) +{ + CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); +} + +/** + * @brief Enable high impedance (VREF+pin is high impedance) + * @rmtoll VREFBUF_CSR VREFBUF_CSR_HIZ LL_VREFBUF_EnableHIZ + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_EnableHIZ(void) +{ + SET_BIT(VREFBUF->CSR, VREFBUF_CSR_HIZ); +} + +/** + * @brief Disable high impedance (VREF+pin is internally connected to the voltage reference buffer output) + * @rmtoll VREFBUF_CSR VREFBUF_CSR_HIZ LL_VREFBUF_DisableHIZ + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_DisableHIZ(void) +{ + CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_HIZ); +} + +/** + * @brief Set the Voltage reference scale + * @rmtoll VREFBUF_CSR VREFBUF_CSR_VRS LL_VREFBUF_SetVoltageScaling + * @param Scale This parameter can be one of the following values: + * @arg @ref LL_VREFBUF_VOLTAGE_SCALE0 + * @arg @ref LL_VREFBUF_VOLTAGE_SCALE1 + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_SetVoltageScaling(uint32_t Scale) +{ + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_VRS, Scale); +} + +/** + * @brief Get the Voltage reference scale + * @rmtoll VREFBUF_CSR VREFBUF_CSR_VRS LL_VREFBUF_GetVoltageScaling + * @retval Returned value can be one of the following values: + * @arg @ref LL_VREFBUF_VOLTAGE_SCALE0 + * @arg @ref LL_VREFBUF_VOLTAGE_SCALE1 + */ +__STATIC_INLINE uint32_t LL_VREFBUF_GetVoltageScaling(void) +{ + return (uint32_t)(READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRS)); +} + +/** + * @brief Check if Voltage reference buffer is ready + * @rmtoll VREFBUF_CSR VREFBUF_CSR_VRS LL_VREFBUF_IsVREFReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_VREFBUF_IsVREFReady(void) +{ + return ((READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRR) == (VREFBUF_CSR_VRR)) ? 1UL : 0UL); +} + +/** + * @brief Get the trimming code for VREFBUF calibration + * @rmtoll VREFBUF_CCR VREFBUF_CCR_TRIM LL_VREFBUF_GetTrimming + * @retval Between 0 and 0x3F + */ +__STATIC_INLINE uint32_t LL_VREFBUF_GetTrimming(void) +{ + return (uint32_t)(READ_BIT(VREFBUF->CCR, VREFBUF_CCR_TRIM)); +} + +/** + * @brief Set the trimming code for VREFBUF calibration (Tune the internal reference buffer voltage) + * @note VrefBuf voltage scale is calibrated in production for each device, + * using voltage scale 1. This calibration value is loaded + * as default trimming value at device power up. + * This trimming value can be fine tuned for voltage scales 0 and 1 + * using this function. + * @rmtoll VREFBUF_CCR VREFBUF_CCR_TRIM LL_VREFBUF_SetTrimming + * @param Value Between 0 and 0x3F + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_SetTrimming(uint32_t Value) +{ + WRITE_REG(VREFBUF->CCR, Value); +} + +/** + * @} + */ +#endif /* VREFBUF */ + +/** @defgroup SYSTEM_LL_EF_FLASH FLASH + * @{ + */ + +/** + * @brief Set FLASH Latency + * @rmtoll FLASH_ACR FLASH_ACR_LATENCY LL_FLASH_SetLatency + * @param Latency This parameter can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + * @arg @ref LL_FLASH_LATENCY_2 + * @retval None + */ +__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency) +{ + MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency); +} + +/** + * @brief Get FLASH Latency + * @rmtoll FLASH_ACR FLASH_ACR_LATENCY LL_FLASH_GetLatency + * @retval Returned value can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + * @arg @ref LL_FLASH_LATENCY_2 + */ +__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void) +{ + return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY)); +} + +/** + * @brief Enable Prefetch + * @rmtoll FLASH_ACR FLASH_ACR_PRFTEN LL_FLASH_EnablePrefetch + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnablePrefetch(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN); +} + +/** + * @brief Disable Prefetch + * @rmtoll FLASH_ACR FLASH_ACR_PRFTEN LL_FLASH_DisablePrefetch + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisablePrefetch(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN); +} + +/** + * @brief Check if Prefetch buffer is enabled + * @rmtoll FLASH_ACR FLASH_ACR_PRFTEN LL_FLASH_IsPrefetchEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void) +{ + return ((READ_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) == (FLASH_ACR_PRFTEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable Instruction cache + * @rmtoll FLASH_ACR FLASH_ACR_ICEN LL_FLASH_EnableInstCache + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnableInstCache(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_ICEN); +} + +/** + * @brief Disable Instruction cache + * @rmtoll FLASH_ACR FLASH_ACR_ICEN LL_FLASH_DisableInstCache + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisableInstCache(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICEN); +} + +/** + * @brief Enable Instruction cache reset + * @note bit can be written only when the instruction cache is disabled + * @rmtoll FLASH_ACR FLASH_ACR_ICRST LL_FLASH_EnableInstCacheReset + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnableInstCacheReset(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_ICRST); +} + +/** + * @brief Disable Instruction cache reset + * @rmtoll FLASH_ACR FLASH_ACR_ICRST LL_FLASH_DisableInstCacheReset + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisableInstCacheReset(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICRST); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBG) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_SYSTEM_H */ + + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_usart.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_usart.h new file mode 100644 index 0000000..09b8d76 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_usart.h @@ -0,0 +1,4399 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_usart.h + * @author MCD Application Team + * @brief Header file of USART LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_USART_H +#define STM32G0xx_LL_USART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined(USART1) || defined(USART2) || defined(USART3) || defined(USART4) || defined(USART5) || defined(USART6) + +/** @defgroup USART_LL USART + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup USART_LL_Private_Variables USART Private Variables + * @{ + */ +/* Array used to get the USART prescaler division decimal values versus @ref USART_LL_EC_PRESCALER values */ +static const uint32_t USART_PRESCALER_TAB[] = +{ + 1UL, + 2UL, + 4UL, + 6UL, + 8UL, + 10UL, + 12UL, + 16UL, + 32UL, + 64UL, + 128UL, + 256UL +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup USART_LL_Private_Constants USART Private Constants + * @{ + */ +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_Private_Macros USART Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_ES_INIT USART Exported Init structures + * @{ + */ + +/** + * @brief LL USART Init Structure definition + */ +typedef struct +{ + uint32_t PrescalerValue; /*!< Specifies the Prescaler to compute the communication baud rate. + This parameter can be a value of @ref USART_LL_EC_PRESCALER. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetPrescaler().*/ + + uint32_t BaudRate; /*!< This field defines expected Usart communication baud rate. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetBaudRate().*/ + + uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USART_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetDataWidth().*/ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_LL_EC_STOPBITS. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetStopBitsLength().*/ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_LL_EC_PARITY. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetParity().*/ + + uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_DIRECTION. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetTransferDirection().*/ + + uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_HWCONTROL. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetHWFlowCtrl().*/ + + uint32_t OverSampling; /*!< Specifies whether USART oversampling mode is 16 or 8. + This parameter can be a value of @ref USART_LL_EC_OVERSAMPLING. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetOverSampling().*/ + +} LL_USART_InitTypeDef; + +/** + * @brief LL USART Clock Init Structure definition + */ +typedef struct +{ + uint32_t ClockOutput; /*!< Specifies whether the USART clock is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_CLOCK. + + USART HW configuration can be modified afterwards using unitary functions + @ref LL_USART_EnableSCLKOutput() or @ref LL_USART_DisableSCLKOutput(). + For more details, refer to description of this function. */ + + uint32_t ClockPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref USART_LL_EC_POLARITY. + + USART HW configuration can be modified afterwards using unitary + functions @ref LL_USART_SetClockPolarity(). + For more details, refer to description of this function. */ + + uint32_t ClockPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_LL_EC_PHASE. + + USART HW configuration can be modified afterwards using unitary + functions @ref LL_USART_SetClockPhase(). + For more details, refer to description of this function. */ + + uint32_t LastBitClockPulse; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_LL_EC_LASTCLKPULSE. + + USART HW configuration can be modified afterwards using unitary + functions @ref LL_USART_SetLastClkPulseOutput(). + For more details, refer to description of this function. */ + +} LL_USART_ClockInitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Constants USART Exported Constants + * @{ + */ + +/** @defgroup USART_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_USART_WriteReg function + * @{ + */ +#define LL_USART_ICR_PECF USART_ICR_PECF /*!< Parity error clear flag */ +#define LL_USART_ICR_FECF USART_ICR_FECF /*!< Framing error clear flag */ +#define LL_USART_ICR_NECF USART_ICR_NECF /*!< Noise error detected clear flag */ +#define LL_USART_ICR_ORECF USART_ICR_ORECF /*!< Overrun error clear flag */ +#define LL_USART_ICR_IDLECF USART_ICR_IDLECF /*!< Idle line detected clear flag */ +#define LL_USART_ICR_TXFECF USART_ICR_TXFECF /*!< TX FIFO Empty clear flag */ +#define LL_USART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete clear flag */ +#define LL_USART_ICR_TCBGTCF USART_ICR_TCBGTCF /*!< Transmission completed before guard time clear flag */ +#define LL_USART_ICR_LBDCF USART_ICR_LBDCF /*!< LIN break detection clear flag */ +#define LL_USART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS clear flag */ +#define LL_USART_ICR_RTOCF USART_ICR_RTOCF /*!< Receiver timeout clear flag */ +#define LL_USART_ICR_EOBCF USART_ICR_EOBCF /*!< End of block clear flag */ +#define LL_USART_ICR_UDRCF USART_ICR_UDRCF /*!< SPI Slave Underrun clear flag */ +#define LL_USART_ICR_CMCF USART_ICR_CMCF /*!< Character match clear flag */ +#define LL_USART_ICR_WUCF USART_ICR_WUCF /*!< Wakeup from Stop mode clear flag */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_USART_ReadReg function + * @{ + */ +#define LL_USART_ISR_PE USART_ISR_PE /*!< Parity error flag */ +#define LL_USART_ISR_FE USART_ISR_FE /*!< Framing error flag */ +#define LL_USART_ISR_NE USART_ISR_NE /*!< Noise detected flag */ +#define LL_USART_ISR_ORE USART_ISR_ORE /*!< Overrun error flag */ +#define LL_USART_ISR_IDLE USART_ISR_IDLE /*!< Idle line detected flag */ +#define LL_USART_ISR_RXNE_RXFNE USART_ISR_RXNE_RXFNE /*!< Read data register or RX FIFO not empty flag */ +#define LL_USART_ISR_TC USART_ISR_TC /*!< Transmission complete flag */ +#define LL_USART_ISR_TXE_TXFNF USART_ISR_TXE_TXFNF /*!< Transmit data register empty or TX FIFO Not Full flag*/ +#define LL_USART_ISR_LBDF USART_ISR_LBDF /*!< LIN break detection flag */ +#define LL_USART_ISR_CTSIF USART_ISR_CTSIF /*!< CTS interrupt flag */ +#define LL_USART_ISR_CTS USART_ISR_CTS /*!< CTS flag */ +#define LL_USART_ISR_RTOF USART_ISR_RTOF /*!< Receiver timeout flag */ +#define LL_USART_ISR_EOBF USART_ISR_EOBF /*!< End of block flag */ +#define LL_USART_ISR_UDR USART_ISR_UDR /*!< SPI Slave underrun error flag */ +#define LL_USART_ISR_ABRE USART_ISR_ABRE /*!< Auto baud rate error flag */ +#define LL_USART_ISR_ABRF USART_ISR_ABRF /*!< Auto baud rate flag */ +#define LL_USART_ISR_BUSY USART_ISR_BUSY /*!< Busy flag */ +#define LL_USART_ISR_CMF USART_ISR_CMF /*!< Character match flag */ +#define LL_USART_ISR_SBKF USART_ISR_SBKF /*!< Send break flag */ +#define LL_USART_ISR_RWU USART_ISR_RWU /*!< Receiver wakeup from Mute mode flag */ +#define LL_USART_ISR_WUF USART_ISR_WUF /*!< Wakeup from Stop mode flag */ +#define LL_USART_ISR_TEACK USART_ISR_TEACK /*!< Transmit enable acknowledge flag */ +#define LL_USART_ISR_REACK USART_ISR_REACK /*!< Receive enable acknowledge flag */ +#define LL_USART_ISR_TXFE USART_ISR_TXFE /*!< TX FIFO empty flag */ +#define LL_USART_ISR_RXFF USART_ISR_RXFF /*!< RX FIFO full flag */ +#define LL_USART_ISR_TCBGT USART_ISR_TCBGT /*!< Transmission complete before guard time completion flag */ +#define LL_USART_ISR_RXFT USART_ISR_RXFT /*!< RX FIFO threshold flag */ +#define LL_USART_ISR_TXFT USART_ISR_TXFT /*!< TX FIFO threshold flag */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_USART_ReadReg and LL_USART_WriteReg functions + * @{ + */ +#define LL_USART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */ +#define LL_USART_CR1_RXNEIE_RXFNEIE USART_CR1_RXNEIE_RXFNEIE /*!< Read data register and RXFIFO not empty interrupt enable */ +#define LL_USART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */ +#define LL_USART_CR1_TXEIE_TXFNFIE USART_CR1_TXEIE_TXFNFIE /*!< Transmit data register empty and TX FIFO not full interrupt enable */ +#define LL_USART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */ +#define LL_USART_CR1_CMIE USART_CR1_CMIE /*!< Character match interrupt enable */ +#define LL_USART_CR1_RTOIE USART_CR1_RTOIE /*!< Receiver timeout interrupt enable */ +#define LL_USART_CR1_EOBIE USART_CR1_EOBIE /*!< End of Block interrupt enable */ +#define LL_USART_CR1_TXFEIE USART_CR1_TXFEIE /*!< TX FIFO empty interrupt enable */ +#define LL_USART_CR1_RXFFIE USART_CR1_RXFFIE /*!< RX FIFO full interrupt enable */ +#define LL_USART_CR2_LBDIE USART_CR2_LBDIE /*!< LIN break detection interrupt enable */ +#define LL_USART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */ +#define LL_USART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */ +#define LL_USART_CR3_WUFIE USART_CR3_WUFIE /*!< Wakeup from Stop mode interrupt enable */ +#define LL_USART_CR3_TXFTIE USART_CR3_TXFTIE /*!< TX FIFO threshold interrupt enable */ +#define LL_USART_CR3_TCBGTIE USART_CR3_TCBGTIE /*!< Transmission complete before guard time interrupt enable */ +#define LL_USART_CR3_RXFTIE USART_CR3_RXFTIE /*!< RX FIFO threshold interrupt enable */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_FIFOTHRESHOLD FIFO Threshold + * @{ + */ +#define LL_USART_FIFOTHRESHOLD_1_8 0x00000000U /*!< FIFO reaches 1/8 of its depth */ +#define LL_USART_FIFOTHRESHOLD_1_4 0x00000001U /*!< FIFO reaches 1/4 of its depth */ +#define LL_USART_FIFOTHRESHOLD_1_2 0x00000002U /*!< FIFO reaches 1/2 of its depth */ +#define LL_USART_FIFOTHRESHOLD_3_4 0x00000003U /*!< FIFO reaches 3/4 of its depth */ +#define LL_USART_FIFOTHRESHOLD_7_8 0x00000004U /*!< FIFO reaches 7/8 of its depth */ +#define LL_USART_FIFOTHRESHOLD_8_8 0x00000005U /*!< FIFO becomes empty for TX and full for RX */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DIRECTION Communication Direction + * @{ + */ +#define LL_USART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */ +#define LL_USART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */ +#define LL_USART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */ +#define LL_USART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PARITY Parity Control + * @{ + */ +#define LL_USART_PARITY_NONE 0x00000000U /*!< Parity control disabled */ +#define LL_USART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */ +#define LL_USART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_WAKEUP Wakeup + * @{ + */ +#define LL_USART_WAKEUP_IDLELINE 0x00000000U /*!< USART wake up from Mute mode on Idle Line */ +#define LL_USART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< USART wake up from Mute mode on Address Mark */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_USART_DATAWIDTH_7B USART_CR1_M1 /*!< 7 bits word length : Start bit, 7 data bits, n stop bits */ +#define LL_USART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */ +#define LL_USART_DATAWIDTH_9B USART_CR1_M0 /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_OVERSAMPLING Oversampling + * @{ + */ +#define LL_USART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#define LL_USART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EC_CLOCK Clock Signal + * @{ + */ + +#define LL_USART_CLOCK_DISABLE 0x00000000U /*!< Clock signal not provided */ +#define LL_USART_CLOCK_ENABLE USART_CR2_CLKEN /*!< Clock signal provided */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/** @defgroup USART_LL_EC_LASTCLKPULSE Last Clock Pulse + * @{ + */ +#define LL_USART_LASTCLKPULSE_NO_OUTPUT 0x00000000U /*!< The clock pulse of the last data bit is not output to the SCLK pin */ +#define LL_USART_LASTCLKPULSE_OUTPUT USART_CR2_LBCL /*!< The clock pulse of the last data bit is output to the SCLK pin */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PHASE Clock Phase + * @{ + */ +#define LL_USART_PHASE_1EDGE 0x00000000U /*!< The first clock transition is the first data capture edge */ +#define LL_USART_PHASE_2EDGE USART_CR2_CPHA /*!< The second clock transition is the first data capture edge */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_USART_POLARITY_LOW 0x00000000U /*!< Steady low value on SCLK pin outside transmission window*/ +#define LL_USART_POLARITY_HIGH USART_CR2_CPOL /*!< Steady high value on SCLK pin outside transmission window */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PRESCALER Clock Source Prescaler + * @{ + */ +#define LL_USART_PRESCALER_DIV1 0x00000000U /*!< Input clock not divided */ +#define LL_USART_PRESCALER_DIV2 (USART_PRESC_PRESCALER_0) /*!< Input clock divided by 2 */ +#define LL_USART_PRESCALER_DIV4 (USART_PRESC_PRESCALER_1) /*!< Input clock divided by 4 */ +#define LL_USART_PRESCALER_DIV6 (USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 6 */ +#define LL_USART_PRESCALER_DIV8 (USART_PRESC_PRESCALER_2) /*!< Input clock divided by 8 */ +#define LL_USART_PRESCALER_DIV10 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 10 */ +#define LL_USART_PRESCALER_DIV12 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 12 */ +#define LL_USART_PRESCALER_DIV16 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 16 */ +#define LL_USART_PRESCALER_DIV32 (USART_PRESC_PRESCALER_3) /*!< Input clock divided by 32 */ +#define LL_USART_PRESCALER_DIV64 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 64 */ +#define LL_USART_PRESCALER_DIV128 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 128 */ +#define LL_USART_PRESCALER_DIV256 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 256 */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_STOPBITS Stop Bits + * @{ + */ +#define LL_USART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< 0.5 stop bit */ +#define LL_USART_STOPBITS_1 0x00000000U /*!< 1 stop bit */ +#define LL_USART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< 1.5 stop bits */ +#define LL_USART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_TXRX TX RX Pins Swap + * @{ + */ +#define LL_USART_TXRX_STANDARD 0x00000000U /*!< TX/RX pins are used as defined in standard pinout */ +#define LL_USART_TXRX_SWAPPED (USART_CR2_SWAP) /*!< TX and RX pins functions are swapped. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_RXPIN_LEVEL RX Pin Active Level Inversion + * @{ + */ +#define LL_USART_RXPIN_LEVEL_STANDARD 0x00000000U /*!< RX pin signal works using the standard logic levels */ +#define LL_USART_RXPIN_LEVEL_INVERTED (USART_CR2_RXINV) /*!< RX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_TXPIN_LEVEL TX Pin Active Level Inversion + * @{ + */ +#define LL_USART_TXPIN_LEVEL_STANDARD 0x00000000U /*!< TX pin signal works using the standard logic levels */ +#define LL_USART_TXPIN_LEVEL_INVERTED (USART_CR2_TXINV) /*!< TX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_BINARY_LOGIC Binary Data Inversion + * @{ + */ +#define LL_USART_BINARY_LOGIC_POSITIVE 0x00000000U /*!< Logical data from the data register are send/received in positive/direct logic. (1=H, 0=L) */ +#define LL_USART_BINARY_LOGIC_NEGATIVE USART_CR2_DATAINV /*!< Logical data from the data register are send/received in negative/inverse logic. (1=L, 0=H). The parity bit is also inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_BITORDER Bit Order + * @{ + */ +#define LL_USART_BITORDER_LSBFIRST 0x00000000U /*!< data is transmitted/received with data bit 0 first, following the start bit */ +#define LL_USART_BITORDER_MSBFIRST USART_CR2_MSBFIRST /*!< data is transmitted/received with the MSB first, following the start bit */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_AUTOBAUD_DETECT_ON Autobaud Detection + * @{ + */ +#define LL_USART_AUTOBAUD_DETECT_ON_STARTBIT 0x00000000U /*!< Measurement of the start bit is used to detect the baud rate */ +#define LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE USART_CR2_ABRMODE_0 /*!< Falling edge to falling edge measurement. Received frame must start with a single bit = 1 -> Frame = Start10xxxxxx */ +#define LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME USART_CR2_ABRMODE_1 /*!< 0x7F frame detection */ +#define LL_USART_AUTOBAUD_DETECT_ON_55_FRAME (USART_CR2_ABRMODE_1 | USART_CR2_ABRMODE_0) /*!< 0x55 frame detection */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_ADDRESS_DETECT Address Length Detection + * @{ + */ +#define LL_USART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit address detection method selected */ +#define LL_USART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit address detection (in 8-bit data mode) method selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_HWCONTROL Hardware Control + * @{ + */ +#define LL_USART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */ +#define LL_USART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested when there is space in the receive buffer */ +#define LL_USART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted when the nCTS input is asserted (tied to 0) */ +#define LL_USART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_WAKEUP_ON Wakeup Activation + * @{ + */ +#define LL_USART_WAKEUP_ON_ADDRESS 0x00000000U /*!< Wake up active on address match */ +#define LL_USART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< Wake up active on Start bit detection */ +#define LL_USART_WAKEUP_ON_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1) /*!< Wake up active on RXNE */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_IRDA_POWER IrDA Power + * @{ + */ +#define LL_USART_IRDA_POWER_NORMAL 0x00000000U /*!< IrDA normal power mode */ +#define LL_USART_IRDA_POWER_LOW USART_CR3_IRLP /*!< IrDA low power mode */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_LINBREAK_DETECT LIN Break Detection Length + * @{ + */ +#define LL_USART_LINBREAK_DETECT_10B 0x00000000U /*!< 10-bit break detection method selected */ +#define LL_USART_LINBREAK_DETECT_11B USART_CR2_LBDL /*!< 11-bit break detection method selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DE_POLARITY Driver Enable Polarity + * @{ + */ +#define LL_USART_DE_POLARITY_HIGH 0x00000000U /*!< DE signal is active high */ +#define LL_USART_DE_POLARITY_LOW USART_CR3_DEP /*!< DE signal is active low */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_USART_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */ +#define LL_USART_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Macros USART Exported Macros + * @{ + */ + +/** @defgroup USART_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_USART_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_USART_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup USART_LL_EM_Exported_Macros_Helper Exported_Macros_Helper + * @{ + */ + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 8 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + * @param __PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_8 case + */ +#define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) \ + (((((__PERIPHCLK__)/(USART_PRESCALER_TAB[(__PRESCALER__)]))*2U)\ + + ((__BAUDRATE__)/2U))/(__BAUDRATE__)) + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 16 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + * @param __PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_16 case + */ +#define __LL_USART_DIV_SAMPLING16(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) \ + ((((__PERIPHCLK__)/(USART_PRESCALER_TAB[(__PRESCALER__)]))\ + + ((__BAUDRATE__)/2U))/(__BAUDRATE__)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USART_LL_Exported_Functions USART Exported Functions + * @{ + */ + +/** @defgroup USART_LL_EF_Configuration Configuration functions + * @{ + */ + +/** + * @brief USART Enable + * @rmtoll CR1 UE LL_USART_Enable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Enable(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief USART Disable (all USART prescalers and outputs are disabled) + * @note When USART is disabled, USART prescalers and outputs are stopped immediately, + * and current operations are discarded. The configuration of the USART is kept, but all the status + * flags, in the USARTx_ISR are set to their default values. + * @rmtoll CR1 UE LL_USART_Disable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Disable(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief Indicate if USART is enabled + * @rmtoll CR1 UE LL_USART_IsEnabled + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabled(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_UE) == (USART_CR1_UE)) ? 1UL : 0UL); +} + +/** + * @brief FIFO Mode Enable + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 FIFOEN LL_USART_EnableFIFO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableFIFO(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief FIFO Mode Disable + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 FIFOEN LL_USART_DisableFIFO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableFIFO(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief Indicate if FIFO Mode is enabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 FIFOEN LL_USART_IsEnabledFIFO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledFIFO(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_FIFOEN) == (USART_CR1_FIFOEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure TX FIFO Threshold + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTCFG LL_USART_SetTXFIFOThreshold + * @param USARTx USART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXFIFOThreshold(USART_TypeDef *USARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG, Threshold << USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Return TX FIFO Threshold Configuration + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTCFG LL_USART_GetTXFIFOThreshold + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetTXFIFOThreshold(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Configure RX FIFO Threshold + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTCFG LL_USART_SetRXFIFOThreshold + * @param USARTx USART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRXFIFOThreshold(USART_TypeDef *USARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_RXFTCFG, Threshold << USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Return RX FIFO Threshold Configuration + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTCFG LL_USART_GetRXFIFOThreshold + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetRXFIFOThreshold(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Configure TX and RX FIFOs Threshold + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTCFG LL_USART_ConfigFIFOsThreshold\n + * CR3 RXFTCFG LL_USART_ConfigFIFOsThreshold + * @param USARTx USART Instance + * @param TXThreshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @param RXThreshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigFIFOsThreshold(USART_TypeDef *USARTx, uint32_t TXThreshold, uint32_t RXThreshold) +{ + ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | + (RXThreshold << USART_CR3_RXFTCFG_Pos)); +} + +/** + * @brief USART enabled in STOP Mode. + * @note When this function is enabled, USART is able to wake up the MCU from Stop mode, provided that + * USART clock selection is HSI or LSE in RCC. + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_EnableInStopMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableInStopMode(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief USART disabled in STOP Mode. + * @note When this function is disabled, USART is not able to wake up the MCU from Stop mode + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_DisableInStopMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableInStopMode(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief Indicate if USART is enabled in STOP Mode (able to wake up MCU from Stop mode or not) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_IsEnabledInStopMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledInStopMode(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_UESM) == (USART_CR1_UESM)) ? 1UL : 0UL); +} + +/** + * @brief Receiver Enable (Receiver is enabled and begins searching for a start bit) + * @rmtoll CR1 RE LL_USART_EnableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Receiver Disable + * @rmtoll CR1 RE LL_USART_DisableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Transmitter Enable + * @rmtoll CR1 TE LL_USART_EnableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Transmitter Disable + * @rmtoll CR1 TE LL_USART_DisableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Configure simultaneously enabled/disabled states + * of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_SetTransferDirection\n + * CR1 TE LL_USART_SetTransferDirection + * @param USARTx USART Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTransferDirection(USART_TypeDef *USARTx, uint32_t TransferDirection) +{ + ATOMIC_MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); +} + +/** + * @brief Return enabled/disabled states of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_GetTransferDirection\n + * CR1 TE LL_USART_GetTransferDirection + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + */ +__STATIC_INLINE uint32_t LL_USART_GetTransferDirection(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_RE | USART_CR1_TE)); +} + +/** + * @brief Configure Parity (enabled/disabled and parity mode if enabled). + * @note This function selects if hardware parity control (generation and detection) is enabled or disabled. + * When the parity control is enabled (Odd or Even), computed parity bit is inserted at the MSB position + * (9th or 8th bit depending on data width) and parity is checked on the received data. + * @rmtoll CR1 PS LL_USART_SetParity\n + * CR1 PCE LL_USART_SetParity + * @param USARTx USART Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_USART_SetParity(USART_TypeDef *USARTx, uint32_t Parity) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE, Parity); +} + +/** + * @brief Return Parity configuration (enabled/disabled and parity mode if enabled) + * @rmtoll CR1 PS LL_USART_GetParity\n + * CR1 PCE LL_USART_GetParity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_USART_GetParity(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE)); +} + +/** + * @brief Set Receiver Wake Up method from Mute mode. + * @rmtoll CR1 WAKE LL_USART_SetWakeUpMethod + * @param USARTx USART Instance + * @param Method This parameter can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + * @retval None + */ +__STATIC_INLINE void LL_USART_SetWakeUpMethod(USART_TypeDef *USARTx, uint32_t Method) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_WAKE, Method); +} + +/** + * @brief Return Receiver Wake Up method from Mute mode + * @rmtoll CR1 WAKE LL_USART_GetWakeUpMethod + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + */ +__STATIC_INLINE uint32_t LL_USART_GetWakeUpMethod(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_WAKE)); +} + +/** + * @brief Set Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M0 LL_USART_SetDataWidth\n + * CR1 M1 LL_USART_SetDataWidth + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDataWidth(USART_TypeDef *USARTx, uint32_t DataWidth) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_M, DataWidth); +} + +/** + * @brief Return Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M0 LL_USART_GetDataWidth\n + * CR1 M1 LL_USART_GetDataWidth + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + */ +__STATIC_INLINE uint32_t LL_USART_GetDataWidth(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_M)); +} + +/** + * @brief Allow switch between Mute Mode and Active mode + * @rmtoll CR1 MME LL_USART_EnableMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableMuteMode(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Prevent Mute Mode use. Set Receiver in active mode permanently. + * @rmtoll CR1 MME LL_USART_DisableMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableMuteMode(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Indicate if switch between Mute Mode and Active mode is allowed + * @rmtoll CR1 MME LL_USART_IsEnabledMuteMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledMuteMode(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_MME) == (USART_CR1_MME)) ? 1UL : 0UL); +} + +/** + * @brief Set Oversampling to 8-bit or 16-bit mode + * @rmtoll CR1 OVER8 LL_USART_SetOverSampling + * @param USARTx USART Instance + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetOverSampling(USART_TypeDef *USARTx, uint32_t OverSampling) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_OVER8, OverSampling); +} + +/** + * @brief Return Oversampling mode + * @rmtoll CR1 OVER8 LL_USART_GetOverSampling + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetOverSampling(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_OVER8)); +} + +/** + * @brief Configure if Clock pulse of the last data bit is output to the SCLK pin or not + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_SetLastClkPulseOutput + * @param USARTx USART Instance + * @param LastBitClockPulse This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLastClkPulseOutput(USART_TypeDef *USARTx, uint32_t LastBitClockPulse) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBCL, LastBitClockPulse); +} + +/** + * @brief Retrieve Clock pulse of the last data bit output configuration + * (Last bit Clock pulse output to the SCLK pin or not) + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_GetLastClkPulseOutput + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + */ +__STATIC_INLINE uint32_t LL_USART_GetLastClkPulseOutput(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBCL)); +} + +/** + * @brief Select the phase of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_SetClockPhase + * @param USARTx USART Instance + * @param ClockPhase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPhase(USART_TypeDef *USARTx, uint32_t ClockPhase) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA, ClockPhase); +} + +/** + * @brief Return phase of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_GetClockPhase + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPhase(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPHA)); +} + +/** + * @brief Select the polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_SetClockPolarity + * @param USARTx USART Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPolarity(USART_TypeDef *USARTx, uint32_t ClockPolarity) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPOL, ClockPolarity); +} + +/** + * @brief Return polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_GetClockPolarity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPolarity(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPOL)); +} + +/** + * @brief Configure Clock signal format (Phase Polarity and choice about output of last bit clock pulse) + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clock Phase configuration using @ref LL_USART_SetClockPhase() function + * - Clock Polarity configuration using @ref LL_USART_SetClockPolarity() function + * - Output of Last bit Clock pulse configuration using @ref LL_USART_SetLastClkPulseOutput() function + * @rmtoll CR2 CPHA LL_USART_ConfigClock\n + * CR2 CPOL LL_USART_ConfigClock\n + * CR2 LBCL LL_USART_ConfigClock + * @param USARTx USART Instance + * @param Phase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @param LBCPOutput This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigClock(USART_TypeDef *USARTx, uint32_t Phase, uint32_t Polarity, uint32_t LBCPOutput) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, Phase | Polarity | LBCPOutput); +} + +/** + * @brief Configure Clock source prescaler for baudrate generator and oversampling + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll PRESC PRESCALER LL_USART_SetPrescaler + * @param USARTx USART Instance + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->PRESC, USART_PRESC_PRESCALER, (uint16_t)PrescalerValue); +} + +/** + * @brief Retrieve the Clock source prescaler for baudrate generator and oversampling + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll PRESC PRESCALER LL_USART_GetPrescaler + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + */ +__STATIC_INLINE uint32_t LL_USART_GetPrescaler(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->PRESC, USART_PRESC_PRESCALER)); +} + +/** + * @brief Enable Clock output on SCLK pin + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_EnableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSCLKOutput(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Disable Clock output on SCLK pin + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_DisableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSCLKOutput(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Indicate if Clock output on SCLK pin is enabled + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_IsEnabledSCLKOutput + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSCLKOutput(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_CLKEN) == (USART_CR2_CLKEN)) ? 1UL : 0UL); +} + +/** + * @brief Set the length of the stop bits + * @rmtoll CR2 STOP LL_USART_SetStopBitsLength + * @param USARTx USART Instance + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetStopBitsLength(USART_TypeDef *USARTx, uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Retrieve the length of the stop bits + * @rmtoll CR2 STOP LL_USART_GetStopBitsLength + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + */ +__STATIC_INLINE uint32_t LL_USART_GetStopBitsLength(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_STOP)); +} + +/** + * @brief Configure Character frame format (Datawidth, Parity control, Stop Bits) + * @note Call of this function is equivalent to following function call sequence : + * - Data Width configuration using @ref LL_USART_SetDataWidth() function + * - Parity Control and mode configuration using @ref LL_USART_SetParity() function + * - Stop bits configuration using @ref LL_USART_SetStopBitsLength() function + * @rmtoll CR1 PS LL_USART_ConfigCharacter\n + * CR1 PCE LL_USART_ConfigCharacter\n + * CR1 M0 LL_USART_ConfigCharacter\n + * CR1 M1 LL_USART_ConfigCharacter\n + * CR2 STOP LL_USART_ConfigCharacter + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigCharacter(USART_TypeDef *USARTx, uint32_t DataWidth, uint32_t Parity, + uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE | USART_CR1_M, Parity | DataWidth); + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Configure TX/RX pins swapping setting. + * @rmtoll CR2 SWAP LL_USART_SetTXRXSwap + * @param USARTx USART Instance + * @param SwapConfig This parameter can be one of the following values: + * @arg @ref LL_USART_TXRX_STANDARD + * @arg @ref LL_USART_TXRX_SWAPPED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXRXSwap(USART_TypeDef *USARTx, uint32_t SwapConfig) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_SWAP, SwapConfig); +} + +/** + * @brief Retrieve TX/RX pins swapping configuration. + * @rmtoll CR2 SWAP LL_USART_GetTXRXSwap + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_TXRX_STANDARD + * @arg @ref LL_USART_TXRX_SWAPPED + */ +__STATIC_INLINE uint32_t LL_USART_GetTXRXSwap(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_SWAP)); +} + +/** + * @brief Configure RX pin active level logic + * @rmtoll CR2 RXINV LL_USART_SetRXPinLevel + * @param USARTx USART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_RXINV, PinInvMethod); +} + +/** + * @brief Retrieve RX pin active level logic configuration + * @rmtoll CR2 RXINV LL_USART_GetRXPinLevel + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_USART_GetRXPinLevel(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_RXINV)); +} + +/** + * @brief Configure TX pin active level logic + * @rmtoll CR2 TXINV LL_USART_SetTXPinLevel + * @param USARTx USART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_TXINV, PinInvMethod); +} + +/** + * @brief Retrieve TX pin active level logic configuration + * @rmtoll CR2 TXINV LL_USART_GetTXPinLevel + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_USART_GetTXPinLevel(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_TXINV)); +} + +/** + * @brief Configure Binary data logic. + * @note Allow to define how Logical data from the data register are send/received : + * either in positive/direct logic (1=H, 0=L) or in negative/inverse logic (1=L, 0=H) + * @rmtoll CR2 DATAINV LL_USART_SetBinaryDataLogic + * @param USARTx USART Instance + * @param DataLogic This parameter can be one of the following values: + * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBinaryDataLogic(USART_TypeDef *USARTx, uint32_t DataLogic) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_DATAINV, DataLogic); +} + +/** + * @brief Retrieve Binary data configuration + * @rmtoll CR2 DATAINV LL_USART_GetBinaryDataLogic + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE + */ +__STATIC_INLINE uint32_t LL_USART_GetBinaryDataLogic(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_DATAINV)); +} + +/** + * @brief Configure transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_USART_SetTransferBitOrder + * @param USARTx USART Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_USART_BITORDER_LSBFIRST + * @arg @ref LL_USART_BITORDER_MSBFIRST + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTransferBitOrder(USART_TypeDef *USARTx, uint32_t BitOrder) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_MSBFIRST, BitOrder); +} + +/** + * @brief Return transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_USART_GetTransferBitOrder + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_BITORDER_LSBFIRST + * @arg @ref LL_USART_BITORDER_MSBFIRST + */ +__STATIC_INLINE uint32_t LL_USART_GetTransferBitOrder(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_MSBFIRST)); +} + +/** + * @brief Enable Auto Baud-Rate Detection + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_EnableAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableAutoBaudRate(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_ABREN); +} + +/** + * @brief Disable Auto Baud-Rate Detection + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_DisableAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableAutoBaudRate(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_ABREN); +} + +/** + * @brief Indicate if Auto Baud-Rate Detection mechanism is enabled + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_IsEnabledAutoBaud + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledAutoBaud(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_ABREN) == (USART_CR2_ABREN)) ? 1UL : 0UL); +} + +/** + * @brief Set Auto Baud-Rate mode bits + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABRMODE LL_USART_SetAutoBaudRateMode + * @param USARTx USART Instance + * @param AutoBaudRateMode This parameter can be one of the following values: + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME + * @retval None + */ +__STATIC_INLINE void LL_USART_SetAutoBaudRateMode(USART_TypeDef *USARTx, uint32_t AutoBaudRateMode) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_ABRMODE, AutoBaudRateMode); +} + +/** + * @brief Return Auto Baud-Rate mode + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABRMODE LL_USART_GetAutoBaudRateMode + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME + */ +__STATIC_INLINE uint32_t LL_USART_GetAutoBaudRateMode(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ABRMODE)); +} + +/** + * @brief Enable Receiver Timeout + * @rmtoll CR2 RTOEN LL_USART_EnableRxTimeout + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableRxTimeout(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_RTOEN); +} + +/** + * @brief Disable Receiver Timeout + * @rmtoll CR2 RTOEN LL_USART_DisableRxTimeout + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableRxTimeout(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_RTOEN); +} + +/** + * @brief Indicate if Receiver Timeout feature is enabled + * @rmtoll CR2 RTOEN LL_USART_IsEnabledRxTimeout + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledRxTimeout(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_RTOEN) == (USART_CR2_RTOEN)) ? 1UL : 0UL); +} + +/** + * @brief Set Address of the USART node. + * @note This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with address mark detection. + * @note 4bits address node is used when 4-bit Address Detection is selected in ADDM7. + * (b7-b4 should be set to 0) + * 8bits address node is used when 7-bit Address Detection is selected in ADDM7. + * (This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with 7-bit address mark detection. + * The MSB of the character sent by the transmitter should be equal to 1. + * It may also be used for character detection during normal reception, + * Mute mode inactive (for example, end of block detection in ModBus protocol). + * In this case, the whole received character (8-bit) is compared to the ADD[7:0] + * value and CMF flag is set on match) + * @rmtoll CR2 ADD LL_USART_ConfigNodeAddress\n + * CR2 ADDM7 LL_USART_ConfigNodeAddress + * @param USARTx USART Instance + * @param AddressLen This parameter can be one of the following values: + * @arg @ref LL_USART_ADDRESS_DETECT_4B + * @arg @ref LL_USART_ADDRESS_DETECT_7B + * @param NodeAddress 4 or 7 bit Address of the USART node. + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigNodeAddress(USART_TypeDef *USARTx, uint32_t AddressLen, uint32_t NodeAddress) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_ADD | USART_CR2_ADDM7, + (uint32_t)(AddressLen | (NodeAddress << USART_CR2_ADD_Pos))); +} + +/** + * @brief Return 8 bit Address of the USART node as set in ADD field of CR2. + * @note If 4-bit Address Detection is selected in ADDM7, + * only 4bits (b3-b0) of returned value are relevant (b31-b4 are not relevant) + * If 7-bit Address Detection is selected in ADDM7, + * only 8bits (b7-b0) of returned value are relevant (b31-b8 are not relevant) + * @rmtoll CR2 ADD LL_USART_GetNodeAddress + * @param USARTx USART Instance + * @retval Address of the USART node (Value between Min_Data=0 and Max_Data=255) + */ +__STATIC_INLINE uint32_t LL_USART_GetNodeAddress(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADD) >> USART_CR2_ADD_Pos); +} + +/** + * @brief Return Length of Node Address used in Address Detection mode (7-bit or 4-bit) + * @rmtoll CR2 ADDM7 LL_USART_GetNodeAddressLen + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_ADDRESS_DETECT_4B + * @arg @ref LL_USART_ADDRESS_DETECT_7B + */ +__STATIC_INLINE uint32_t LL_USART_GetNodeAddressLen(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADDM7)); +} + +/** + * @brief Enable RTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_EnableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Disable RTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_DisableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Enable CTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_EnableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Disable CTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_DisableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Configure HW Flow Control mode (both CTS and RTS) + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_SetHWFlowCtrl\n + * CR3 CTSE LL_USART_SetHWFlowCtrl + * @param USARTx USART Instance + * @param HardwareFlowControl This parameter can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + * @retval None + */ +__STATIC_INLINE void LL_USART_SetHWFlowCtrl(USART_TypeDef *USARTx, uint32_t HardwareFlowControl) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE, HardwareFlowControl); +} + +/** + * @brief Return HW Flow Control configuration (both CTS and RTS) + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_GetHWFlowCtrl\n + * CR3 CTSE LL_USART_GetHWFlowCtrl + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + */ +__STATIC_INLINE uint32_t LL_USART_GetHWFlowCtrl(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE)); +} + +/** + * @brief Enable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_EnableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableOneBitSamp(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Disable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_DisableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableOneBitSamp(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Indicate if One bit sampling method is enabled + * @rmtoll CR3 ONEBIT LL_USART_IsEnabledOneBitSamp + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledOneBitSamp(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_ONEBIT) == (USART_CR3_ONEBIT)) ? 1UL : 0UL); +} + +/** + * @brief Enable Overrun detection + * @rmtoll CR3 OVRDIS LL_USART_EnableOverrunDetect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableOverrunDetect(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Disable Overrun detection + * @rmtoll CR3 OVRDIS LL_USART_DisableOverrunDetect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableOverrunDetect(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Indicate if Overrun detection is enabled + * @rmtoll CR3 OVRDIS LL_USART_IsEnabledOverrunDetect + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledOverrunDetect(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_OVRDIS) != USART_CR3_OVRDIS) ? 1UL : 0UL); +} + +/** + * @brief Select event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUS LL_USART_SetWKUPType + * @param USARTx USART Instance + * @param Type This parameter can be one of the following values: + * @arg @ref LL_USART_WAKEUP_ON_ADDRESS + * @arg @ref LL_USART_WAKEUP_ON_STARTBIT + * @arg @ref LL_USART_WAKEUP_ON_RXNE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetWKUPType(USART_TypeDef *USARTx, uint32_t Type) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_WUS, Type); +} + +/** + * @brief Return event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUS LL_USART_GetWKUPType + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_WAKEUP_ON_ADDRESS + * @arg @ref LL_USART_WAKEUP_ON_STARTBIT + * @arg @ref LL_USART_WAKEUP_ON_RXNE + */ +__STATIC_INLINE uint32_t LL_USART_GetWKUPType(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_WUS)); +} + +/** + * @brief Configure USART BRR register for achieving expected Baud Rate value. + * @note Compute and set USARTDIV value in BRR Register (full BRR content) + * according to used Peripheral Clock, Oversampling mode, and expected Baud Rate values + * @note Peripheral clock and Baud rate values provided as function parameters should be valid + * (Baud rate value != 0) + * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. + * @rmtoll BRR BRR LL_USART_SetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @param BaudRate Baud Rate + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t PrescalerValue, + uint32_t OverSampling, + uint32_t BaudRate) +{ + uint32_t usartdiv; + uint32_t brrtemp; + + if (PrescalerValue > LL_USART_PRESCALER_DIV256) + { + /* Do not overstep the size of USART_PRESCALER_TAB */ + } + else if (BaudRate == 0U) + { + /* Can Not divide per 0 */ + } + else if (OverSampling == LL_USART_OVERSAMPLING_8) + { + usartdiv = (uint16_t)(__LL_USART_DIV_SAMPLING8(PeriphClk, (uint8_t)PrescalerValue, BaudRate)); + brrtemp = usartdiv & 0xFFF0U; + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + USARTx->BRR = brrtemp; + } + else + { + USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING16(PeriphClk, (uint8_t)PrescalerValue, BaudRate)); + } +} + +/** + * @brief Return current Baud Rate value, according to USARTDIV present in BRR register + * (full BRR content), and to used Peripheral Clock and Oversampling mode values + * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned. + * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. + * @rmtoll BRR BRR LL_USART_GetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval Baud Rate + */ +__STATIC_INLINE uint32_t LL_USART_GetBaudRate(const USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t PrescalerValue, + uint32_t OverSampling) +{ + uint32_t usartdiv; + uint32_t brrresult = 0x0U; + uint32_t periphclkpresc = (uint32_t)(PeriphClk / (USART_PRESCALER_TAB[(uint8_t)PrescalerValue])); + + usartdiv = USARTx->BRR; + + if (usartdiv == 0U) + { + /* Do not perform a division by 0 */ + } + else if (OverSampling == LL_USART_OVERSAMPLING_8) + { + usartdiv = (uint16_t)((usartdiv & 0xFFF0U) | ((usartdiv & 0x0007U) << 1U)) ; + if (usartdiv != 0U) + { + brrresult = (periphclkpresc * 2U) / usartdiv; + } + } + else + { + if ((usartdiv & 0xFFFFU) != 0U) + { + brrresult = periphclkpresc / usartdiv; + } + } + return (brrresult); +} + +/** + * @brief Set Receiver Time Out Value (expressed in nb of bits duration) + * @rmtoll RTOR RTO LL_USART_SetRxTimeout + * @param USARTx USART Instance + * @param Timeout Value between Min_Data=0x00 and Max_Data=0x00FFFFFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRxTimeout(USART_TypeDef *USARTx, uint32_t Timeout) +{ + MODIFY_REG(USARTx->RTOR, USART_RTOR_RTO, Timeout); +} + +/** + * @brief Get Receiver Time Out Value (expressed in nb of bits duration) + * @rmtoll RTOR RTO LL_USART_GetRxTimeout + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x00FFFFFF + */ +__STATIC_INLINE uint32_t LL_USART_GetRxTimeout(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_RTO)); +} + +/** + * @brief Set Block Length value in reception + * @rmtoll RTOR BLEN LL_USART_SetBlockLength + * @param USARTx USART Instance + * @param BlockLength Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBlockLength(USART_TypeDef *USARTx, uint32_t BlockLength) +{ + MODIFY_REG(USARTx->RTOR, USART_RTOR_BLEN, BlockLength << USART_RTOR_BLEN_Pos); +} + +/** + * @brief Get Block Length value in reception + * @rmtoll RTOR BLEN LL_USART_GetBlockLength + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_USART_GetBlockLength(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_BLEN) >> USART_RTOR_BLEN_Pos); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_IRDA Configuration functions related to Irda feature + * @{ + */ + +/** + * @brief Enable IrDA mode + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_EnableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIrda(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Disable IrDA mode + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_DisableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIrda(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Indicate if IrDA mode is enabled + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_IsEnabledIrda + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIrda(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_IREN) == (USART_CR3_IREN)) ? 1UL : 0UL); +} + +/** + * @brief Configure IrDA Power Mode (Normal or Low Power) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_SetIrdaPowerMode + * @param USARTx USART Instance + * @param PowerMode This parameter can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_IRDA_POWER_LOW + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPowerMode(USART_TypeDef *USARTx, uint32_t PowerMode) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_IRLP, PowerMode); +} + +/** + * @brief Retrieve IrDA Power Mode configuration (Normal or Low Power) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_GetIrdaPowerMode + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPowerMode(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_IRLP)); +} + +/** + * @brief Set Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetIrdaPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, (uint16_t)PrescalerValue); +} + +/** + * @brief Return Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetIrdaPrescaler + * @param USARTx USART Instance + * @retval Irda prescaler value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPrescaler(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_Smartcard Configuration functions related to Smartcard feature + * @{ + */ + +/** + * @brief Enable Smartcard NACK transmission + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_EnableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcardNACK(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Disable Smartcard NACK transmission + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_DisableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcardNACK(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Indicate if Smartcard NACK transmission is enabled + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_IsEnabledSmartcardNACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcardNACK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_NACK) == (USART_CR3_NACK)) ? 1UL : 0UL); +} + +/** + * @brief Enable Smartcard mode + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_EnableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcard(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Disable Smartcard mode + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_DisableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcard(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Indicate if Smartcard mode is enabled + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_IsEnabledSmartcard + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcard(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_SCEN) == (USART_CR3_SCEN)) ? 1UL : 0UL); +} + +/** + * @brief Set Smartcard Auto-Retry Count value (SCARCNT[2:0] bits) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @note This bit-field specifies the number of retries in transmit and receive, in Smartcard mode. + * In transmission mode, it specifies the number of automatic retransmission retries, before + * generating a transmission error (FE bit set). + * In reception mode, it specifies the number or erroneous reception trials, before generating a + * reception error (RXNE and PE bits set) + * @rmtoll CR3 SCARCNT LL_USART_SetSmartcardAutoRetryCount + * @param USARTx USART Instance + * @param AutoRetryCount Value between Min_Data=0 and Max_Data=7 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardAutoRetryCount(USART_TypeDef *USARTx, uint32_t AutoRetryCount) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_SCARCNT, AutoRetryCount << USART_CR3_SCARCNT_Pos); +} + +/** + * @brief Return Smartcard Auto-Retry Count value (SCARCNT[2:0] bits) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCARCNT LL_USART_GetSmartcardAutoRetryCount + * @param USARTx USART Instance + * @retval Smartcard Auto-Retry Count value (Value between Min_Data=0 and Max_Data=7) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardAutoRetryCount(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_SCARCNT) >> USART_CR3_SCARCNT_Pos); +} + +/** + * @brief Set Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetSmartcardPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, (uint16_t)PrescalerValue); +} + +/** + * @brief Return Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetSmartcardPrescaler + * @param USARTx USART Instance + * @retval Smartcard prescaler value (Value between Min_Data=0 and Max_Data=31) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardPrescaler(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @brief Set Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_SetSmartcardGuardTime + * @param USARTx USART Instance + * @param GuardTime Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardGuardTime(USART_TypeDef *USARTx, uint32_t GuardTime) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_GT, (uint16_t)(GuardTime << USART_GTPR_GT_Pos)); +} + +/** + * @brief Return Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_GetSmartcardGuardTime + * @param USARTx USART Instance + * @retval Smartcard Guard time value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardGuardTime(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_GT) >> USART_GTPR_GT_Pos); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_HalfDuplex Configuration functions related to Half Duplex feature + * @{ + */ + +/** + * @brief Enable Single Wire Half-Duplex mode + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_EnableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableHalfDuplex(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Disable Single Wire Half-Duplex mode + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_DisableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableHalfDuplex(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Indicate if Single Wire Half-Duplex mode is enabled + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_IsEnabledHalfDuplex + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledHalfDuplex(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_HDSEL) == (USART_CR3_HDSEL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_SPI_SLAVE Configuration functions related to SPI Slave feature + * @{ + */ +/** + * @brief Enable SPI Synchronous Slave mode + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 SLVEN LL_USART_EnableSPISlave + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSPISlave(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_SLVEN); +} + +/** + * @brief Disable SPI Synchronous Slave mode + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 SLVEN LL_USART_DisableSPISlave + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSPISlave(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_SLVEN); +} + +/** + * @brief Indicate if SPI Synchronous Slave mode is enabled + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 SLVEN LL_USART_IsEnabledSPISlave + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSPISlave(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_SLVEN) == (USART_CR2_SLVEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable SPI Slave Selection using NSS input pin + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @note SPI Slave Selection depends on NSS input pin + * (The slave is selected when NSS is low and deselected when NSS is high). + * @rmtoll CR2 DIS_NSS LL_USART_EnableSPISlaveSelect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSPISlaveSelect(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_DIS_NSS); +} + +/** + * @brief Disable SPI Slave Selection using NSS input pin + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @note SPI Slave will be always selected and NSS input pin will be ignored. + * @rmtoll CR2 DIS_NSS LL_USART_DisableSPISlaveSelect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSPISlaveSelect(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_DIS_NSS); +} + +/** + * @brief Indicate if SPI Slave Selection depends on NSS input pin + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 DIS_NSS LL_USART_IsEnabledSPISlaveSelect + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSPISlaveSelect(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_DIS_NSS) != (USART_CR2_DIS_NSS)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_LIN Configuration functions related to LIN feature + * @{ + */ + +/** + * @brief Set LIN Break Detection Length + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_SetLINBrkDetectionLen + * @param USARTx USART Instance + * @param LINBDLength This parameter can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLINBrkDetectionLen(USART_TypeDef *USARTx, uint32_t LINBDLength) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBDL, LINBDLength); +} + +/** + * @brief Return LIN Break Detection Length + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_GetLINBrkDetectionLen + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + */ +__STATIC_INLINE uint32_t LL_USART_GetLINBrkDetectionLen(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBDL)); +} + +/** + * @brief Enable LIN mode + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_EnableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableLIN(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Disable LIN mode + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_DisableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableLIN(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Indicate if LIN mode is enabled + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_IsEnabledLIN + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledLIN(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_LINEN) == (USART_CR2_LINEN)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_DE Configuration functions related to Driver Enable feature + * @{ + */ + +/** + * @brief Set DEDT (Driver Enable De-Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEDT LL_USART_SetDEDeassertionTime + * @param USARTx USART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDEDeassertionTime(USART_TypeDef *USARTx, uint32_t Time) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_DEDT, Time << USART_CR1_DEDT_Pos); +} + +/** + * @brief Return DEDT (Driver Enable De-Assertion Time) + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEDT LL_USART_GetDEDeassertionTime + * @param USARTx USART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_USART_GetDEDeassertionTime(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEDT) >> USART_CR1_DEDT_Pos); +} + +/** + * @brief Set DEAT (Driver Enable Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEAT LL_USART_SetDEAssertionTime + * @param USARTx USART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDEAssertionTime(USART_TypeDef *USARTx, uint32_t Time) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_DEAT, Time << USART_CR1_DEAT_Pos); +} + +/** + * @brief Return DEAT (Driver Enable Assertion Time) + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEAT LL_USART_GetDEAssertionTime + * @param USARTx USART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_USART_GetDEAssertionTime(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEAT) >> USART_CR1_DEAT_Pos); +} + +/** + * @brief Enable Driver Enable (DE) Mode + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_EnableDEMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDEMode(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Disable Driver Enable (DE) Mode + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_DisableDEMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDEMode(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Indicate if Driver Enable (DE) Mode is enabled + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_IsEnabledDEMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDEMode(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DEM) == (USART_CR3_DEM)) ? 1UL : 0UL); +} + +/** + * @brief Select Driver Enable Polarity + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEP LL_USART_SetDESignalPolarity + * @param USARTx USART Instance + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_USART_DE_POLARITY_HIGH + * @arg @ref LL_USART_DE_POLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDESignalPolarity(USART_TypeDef *USARTx, uint32_t Polarity) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_DEP, Polarity); +} + +/** + * @brief Return Driver Enable Polarity + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEP LL_USART_GetDESignalPolarity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DE_POLARITY_HIGH + * @arg @ref LL_USART_DE_POLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_USART_GetDESignalPolarity(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_DEP)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_AdvancedConfiguration Advanced Configurations services + * @{ + */ + +/** + * @brief Perform basic configuration of USART for enabling use in Asynchronous Mode (UART) + * @note In UART mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Asynchronous Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigAsyncMode\n + * CR2 CLKEN LL_USART_ConfigAsyncMode\n + * CR3 SCEN LL_USART_ConfigAsyncMode\n + * CR3 IREN LL_USART_ConfigAsyncMode\n + * CR3 HDSEL LL_USART_ConfigAsyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigAsyncMode(USART_TypeDef *USARTx) +{ + /* In Asynchronous mode, the following bits must be kept cleared: + - LINEN, CLKEN bits in the USART_CR2 register, + - SCEN, IREN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Synchronous Mode + * @note In Synchronous mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also sets the USART in Synchronous mode. + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * @note Other remaining configurations items related to Synchronous Mode + * (as Baud Rate, Word length, Parity, Clock Polarity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSyncMode\n + * CR2 CLKEN LL_USART_ConfigSyncMode\n + * CR3 SCEN LL_USART_ConfigSyncMode\n + * CR3 IREN LL_USART_ConfigSyncMode\n + * CR3 HDSEL LL_USART_ConfigSyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSyncMode(USART_TypeDef *USARTx) +{ + /* In Synchronous mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register, + - SCEN, IREN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); + /* set the UART/USART in Synchronous mode */ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in LIN Mode + * @note In LIN mode, the following bits must be kept cleared: + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also set the UART/USART in LIN mode. + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set LINEN in CR2 using @ref LL_USART_EnableLIN() function + * @note Other remaining configurations items related to LIN Mode + * (as Baud Rate, Word length, LIN Break Detection Length, ...) should be set using + * dedicated functions + * @rmtoll CR2 CLKEN LL_USART_ConfigLINMode\n + * CR2 STOP LL_USART_ConfigLINMode\n + * CR2 LINEN LL_USART_ConfigLINMode\n + * CR3 IREN LL_USART_ConfigLINMode\n + * CR3 SCEN LL_USART_ConfigLINMode\n + * CR3 HDSEL LL_USART_ConfigLINMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigLINMode(USART_TypeDef *USARTx) +{ + /* In LIN mode, the following bits must be kept cleared: + - STOP and CLKEN bits in the USART_CR2 register, + - IREN, SCEN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_SCEN | USART_CR3_HDSEL)); + /* Set the UART/USART in LIN mode */ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Half Duplex Mode + * @note In Half Duplex mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * This function also sets the UART/USART in Half Duplex mode. + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Set HDSEL in CR3 using @ref LL_USART_EnableHalfDuplex() function + * @note Other remaining configurations items related to Half Duplex Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigHalfDuplexMode\n + * CR2 CLKEN LL_USART_ConfigHalfDuplexMode\n + * CR3 HDSEL LL_USART_ConfigHalfDuplexMode\n + * CR3 SCEN LL_USART_ConfigHalfDuplexMode\n + * CR3 IREN LL_USART_ConfigHalfDuplexMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigHalfDuplexMode(USART_TypeDef *USARTx) +{ + /* In Half Duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN)); + /* set the UART/USART in Half Duplex mode */ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Smartcard Mode + * @note In Smartcard mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also configures Stop bits to 1.5 bits and + * sets the USART in Smartcard mode (SCEN bit). + * Clock Output is also enabled (CLKEN). + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * - Set SCEN in CR3 using @ref LL_USART_EnableSmartcard() function + * @note Other remaining configurations items related to Smartcard Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSmartcardMode\n + * CR2 STOP LL_USART_ConfigSmartcardMode\n + * CR2 CLKEN LL_USART_ConfigSmartcardMode\n + * CR3 HDSEL LL_USART_ConfigSmartcardMode\n + * CR3 SCEN LL_USART_ConfigSmartcardMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSmartcardMode(USART_TypeDef *USARTx) +{ + /* In Smartcard mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register, + - IREN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL)); + /* Configure Stop bits to 1.5 bits */ + /* Synchronous mode is activated by default */ + SET_BIT(USARTx->CR2, (USART_CR2_STOP_0 | USART_CR2_STOP_1 | USART_CR2_CLKEN)); + /* set the UART/USART in Smartcard mode */ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Irda Mode + * @note In IRDA mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also sets the UART/USART in IRDA mode (IREN bit). + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set IREN in CR3 using @ref LL_USART_EnableIrda() function + * @note Other remaining configurations items related to Irda Mode + * (as Baud Rate, Word length, Power mode, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigIrdaMode\n + * CR2 CLKEN LL_USART_ConfigIrdaMode\n + * CR2 STOP LL_USART_ConfigIrdaMode\n + * CR3 SCEN LL_USART_ConfigIrdaMode\n + * CR3 HDSEL LL_USART_ConfigIrdaMode\n + * CR3 IREN LL_USART_ConfigIrdaMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigIrdaMode(USART_TypeDef *USARTx) +{ + /* In IRDA mode, the following bits must be kept cleared: + - LINEN, STOP and CLKEN bits in the USART_CR2 register, + - SCEN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); + /* set the UART/USART in IRDA mode */ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Multi processor Mode + * (several USARTs connected in a network, one of the USARTs can be the master, + * its TX output connected to the RX inputs of the other slaves USARTs). + * @note In MultiProcessor mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Multi processor Mode + * (as Baud Rate, Wake Up Method, Node address, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigMultiProcessMode\n + * CR2 CLKEN LL_USART_ConfigMultiProcessMode\n + * CR3 SCEN LL_USART_ConfigMultiProcessMode\n + * CR3 HDSEL LL_USART_ConfigMultiProcessMode\n + * CR3 IREN LL_USART_ConfigMultiProcessMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigMultiProcessMode(USART_TypeDef *USARTx) +{ + /* In Multi Processor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - IREN, SCEN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if the USART Parity Error Flag is set or not + * @rmtoll ISR PE LL_USART_IsActiveFlag_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_PE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_PE) == (USART_ISR_PE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Framing Error Flag is set or not + * @rmtoll ISR FE LL_USART_IsActiveFlag_FE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_FE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_FE) == (USART_ISR_FE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Noise error detected Flag is set or not + * @rmtoll ISR NE LL_USART_IsActiveFlag_NE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_NE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_NE) == (USART_ISR_NE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART OverRun Error Flag is set or not + * @rmtoll ISR ORE LL_USART_IsActiveFlag_ORE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ORE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ORE) == (USART_ISR_ORE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART IDLE line detected Flag is set or not + * @rmtoll ISR IDLE LL_USART_IsActiveFlag_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_IDLE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_IDLE) == (USART_ISR_IDLE)) ? 1UL : 0UL); +} + +#define LL_USART_IsActiveFlag_RXNE LL_USART_IsActiveFlag_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Check if the USART Read Data Register or USART RX FIFO Not Empty Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR RXNE_RXFNE LL_USART_IsActiveFlag_RXNE_RXFNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXNE_RXFNE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXNE_RXFNE) == (USART_ISR_RXNE_RXFNE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Transmission Complete Flag is set or not + * @rmtoll ISR TC LL_USART_IsActiveFlag_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TC(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TC) == (USART_ISR_TC)) ? 1UL : 0UL); +} + +#define LL_USART_IsActiveFlag_TXE LL_USART_IsActiveFlag_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Check if the USART Transmit Data Register Empty or USART TX FIFO Not Full Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR TXE_TXFNF LL_USART_IsActiveFlag_TXE_TXFNF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXE_TXFNF(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXE_TXFNF) == (USART_ISR_TXE_TXFNF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART LIN Break Detection Flag is set or not + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll ISR LBDF LL_USART_IsActiveFlag_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_LBD(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_LBDF) == (USART_ISR_LBDF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS interrupt Flag is set or not + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ISR CTSIF LL_USART_IsActiveFlag_nCTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_nCTS(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CTSIF) == (USART_ISR_CTSIF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS Flag is set or not + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ISR CTS LL_USART_IsActiveFlag_CTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CTS(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CTS) == (USART_ISR_CTS)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receiver Time Out Flag is set or not + * @rmtoll ISR RTOF LL_USART_IsActiveFlag_RTO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RTO(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RTOF) == (USART_ISR_RTOF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART End Of Block Flag is set or not + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll ISR EOBF LL_USART_IsActiveFlag_EOB + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_EOB(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_EOBF) == (USART_ISR_EOBF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the SPI Slave Underrun error flag is set or not + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll ISR UDR LL_USART_IsActiveFlag_UDR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_UDR(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_UDR) == (USART_ISR_UDR)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Auto-Baud Rate Error Flag is set or not + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll ISR ABRE LL_USART_IsActiveFlag_ABRE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABRE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ABRE) == (USART_ISR_ABRE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Auto-Baud Rate Flag is set or not + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll ISR ABRF LL_USART_IsActiveFlag_ABR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABR(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ABRF) == (USART_ISR_ABRF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Busy Flag is set or not + * @rmtoll ISR BUSY LL_USART_IsActiveFlag_BUSY + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_BUSY(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_BUSY) == (USART_ISR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Character Match Flag is set or not + * @rmtoll ISR CMF LL_USART_IsActiveFlag_CM + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CM(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CMF) == (USART_ISR_CMF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Send Break Flag is set or not + * @rmtoll ISR SBKF LL_USART_IsActiveFlag_SBK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_SBK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_SBKF) == (USART_ISR_SBKF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receive Wake Up from mute mode Flag is set or not + * @rmtoll ISR RWU LL_USART_IsActiveFlag_RWU + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RWU(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RWU) == (USART_ISR_RWU)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Wake Up from stop mode Flag is set or not + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll ISR WUF LL_USART_IsActiveFlag_WKUP + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_WKUP(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_WUF) == (USART_ISR_WUF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Transmit Enable Acknowledge Flag is set or not + * @rmtoll ISR TEACK LL_USART_IsActiveFlag_TEACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TEACK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TEACK) == (USART_ISR_TEACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receive Enable Acknowledge Flag is set or not + * @rmtoll ISR REACK LL_USART_IsActiveFlag_REACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_REACK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_REACK) == (USART_ISR_REACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART TX FIFO Empty Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR TXFE LL_USART_IsActiveFlag_TXFE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXFE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXFE) == (USART_ISR_TXFE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX FIFO Full Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR RXFF LL_USART_IsActiveFlag_RXFF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXFF(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXFF) == (USART_ISR_RXFF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the Smartcard Transmission Complete Before Guard Time Flag is set or not + * @rmtoll ISR TCBGT LL_USART_IsActiveFlag_TCBGT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TCBGT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TCBGT) == (USART_ISR_TCBGT)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART TX FIFO Threshold Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR TXFT LL_USART_IsActiveFlag_TXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXFT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXFT) == (USART_ISR_TXFT)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX FIFO Threshold Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR RXFT LL_USART_IsActiveFlag_RXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXFT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXFT) == (USART_ISR_RXFT)) ? 1UL : 0UL); +} + +/** + * @brief Clear Parity Error Flag + * @rmtoll ICR PECF LL_USART_ClearFlag_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_PE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_PECF); +} + +/** + * @brief Clear Framing Error Flag + * @rmtoll ICR FECF LL_USART_ClearFlag_FE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_FE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_FECF); +} + +/** + * @brief Clear Noise Error detected Flag + * @rmtoll ICR NECF LL_USART_ClearFlag_NE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_NE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_NECF); +} + +/** + * @brief Clear OverRun Error Flag + * @rmtoll ICR ORECF LL_USART_ClearFlag_ORE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_ORE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_ORECF); +} + +/** + * @brief Clear IDLE line detected Flag + * @rmtoll ICR IDLECF LL_USART_ClearFlag_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_IDLE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_IDLECF); +} + +/** + * @brief Clear TX FIFO Empty Flag + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ICR TXFECF LL_USART_ClearFlag_TXFE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TXFE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TXFECF); +} + +/** + * @brief Clear Transmission Complete Flag + * @rmtoll ICR TCCF LL_USART_ClearFlag_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TC(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TCCF); +} + +/** + * @brief Clear Smartcard Transmission Complete Before Guard Time Flag + * @rmtoll ICR TCBGTCF LL_USART_ClearFlag_TCBGT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TCBGT(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TCBGTCF); +} + +/** + * @brief Clear LIN Break Detection Flag + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll ICR LBDCF LL_USART_ClearFlag_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_LBD(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_LBDCF); +} + +/** + * @brief Clear CTS Interrupt Flag + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ICR CTSCF LL_USART_ClearFlag_nCTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_nCTS(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_CTSCF); +} + +/** + * @brief Clear Receiver Time Out Flag + * @rmtoll ICR RTOCF LL_USART_ClearFlag_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_RTO(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_RTOCF); +} + +/** + * @brief Clear End Of Block Flag + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll ICR EOBCF LL_USART_ClearFlag_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_EOB(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_EOBCF); +} + +/** + * @brief Clear SPI Slave Underrun Flag + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll ICR UDRCF LL_USART_ClearFlag_UDR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_UDR(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_UDRCF); +} + +/** + * @brief Clear Character Match Flag + * @rmtoll ICR CMCF LL_USART_ClearFlag_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_CM(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_CMCF); +} + +/** + * @brief Clear Wake Up from stop mode Flag + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll ICR WUCF LL_USART_ClearFlag_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_WKUP(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_WUCF); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_EnableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +#define LL_USART_EnableIT_RXNE LL_USART_EnableIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Enable RX Not Empty and RX FIFO Not Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_USART_EnableIT_RXNE_RXFNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXNE_RXFNE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Enable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_EnableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +#define LL_USART_EnableIT_TXE LL_USART_EnableIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Enable TX Empty and TX FIFO Not Full Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXEIE_TXFNFIE LL_USART_EnableIT_TXE_TXFNF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXE_TXFNF(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Enable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_EnableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_PE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Enable Character Match Interrupt + * @rmtoll CR1 CMIE LL_USART_EnableIT_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_CM(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Enable Receiver Timeout Interrupt + * @rmtoll CR1 RTOIE LL_USART_EnableIT_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RTO(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RTOIE); +} + +/** + * @brief Enable End Of Block Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_EnableIT_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_EOB(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_EOBIE); +} + +/** + * @brief Enable TX FIFO Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXFEIE LL_USART_EnableIT_TXFE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXFE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Enable RX FIFO Full Interrupt + * @rmtoll CR1 RXFFIE LL_USART_EnableIT_RXFF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXFF(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Enable LIN Break Detection Interrupt + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_EnableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_LBD(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LBDIE); +} + +/** + * @brief Enable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register. + * @rmtoll CR3 EIE LL_USART_EnableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Enable CTS Interrupt + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_EnableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Enable Wake Up from Stop Mode Interrupt + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_EnableIT_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_WKUP(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Enable TX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTIE LL_USART_EnableIT_TXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXFT(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Enable Smartcard Transmission Complete Before Guard Time Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 TCBGTIE LL_USART_EnableIT_TCBGT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TCBGT(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_TCBGTIE); +} + +/** + * @brief Enable RX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTIE LL_USART_EnableIT_RXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXFT(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Disable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_DisableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +#define LL_USART_DisableIT_RXNE LL_USART_DisableIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Disable RX Not Empty and RX FIFO Not Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_USART_DisableIT_RXNE_RXFNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXNE_RXFNE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Disable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_DisableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +#define LL_USART_DisableIT_TXE LL_USART_DisableIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Disable TX Empty and TX FIFO Not Full Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXEIE_TXFNFIE LL_USART_DisableIT_TXE_TXFNF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXE_TXFNF(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Disable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_DisableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_PE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Disable Character Match Interrupt + * @rmtoll CR1 CMIE LL_USART_DisableIT_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_CM(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Disable Receiver Timeout Interrupt + * @rmtoll CR1 RTOIE LL_USART_DisableIT_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RTO(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RTOIE); +} + +/** + * @brief Disable End Of Block Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_DisableIT_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_EOB(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_EOBIE); +} + +/** + * @brief Disable TX FIFO Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXFEIE LL_USART_DisableIT_TXFE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXFE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Disable RX FIFO Full Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXFFIE LL_USART_DisableIT_RXFF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXFF(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Disable LIN Break Detection Interrupt + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_DisableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_LBD(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LBDIE); +} + +/** + * @brief Disable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register. + * @rmtoll CR3 EIE LL_USART_DisableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Disable CTS Interrupt + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_DisableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_CTS(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Disable Wake Up from Stop Mode Interrupt + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_DisableIT_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_WKUP(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Disable TX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTIE LL_USART_DisableIT_TXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXFT(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Disable Smartcard Transmission Complete Before Guard Time Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 TCBGTIE LL_USART_DisableIT_TCBGT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TCBGT(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_TCBGTIE); +} + +/** + * @brief Disable RX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTIE LL_USART_DisableIT_RXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXFT(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Check if the USART IDLE Interrupt source is enabled or disabled. + * @rmtoll CR1 IDLEIE LL_USART_IsEnabledIT_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_IDLE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_IDLEIE) == (USART_CR1_IDLEIE)) ? 1UL : 0UL); +} + +#define LL_USART_IsEnabledIT_RXNE LL_USART_IsEnabledIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Check if the USART RX Not Empty and USART RX FIFO Not Empty Interrupt is enabled or disabled. + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_USART_IsEnabledIT_RXNE_RXFNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXNE_RXFNE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE) == (USART_CR1_RXNEIE_RXFNEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Transmission Complete Interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_USART_IsEnabledIT_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TC(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TCIE) == (USART_CR1_TCIE)) ? 1UL : 0UL); +} + +#define LL_USART_IsEnabledIT_TXE LL_USART_IsEnabledIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Check if the USART TX Empty and USART TX FIFO Not Full Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXEIE_TXFNFIE LL_USART_IsEnabledIT_TXE_TXFNF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXE_TXFNF(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE) == (USART_CR1_TXEIE_TXFNFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Parity Error Interrupt is enabled or disabled. + * @rmtoll CR1 PEIE LL_USART_IsEnabledIT_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_PE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_PEIE) == (USART_CR1_PEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Character Match Interrupt is enabled or disabled. + * @rmtoll CR1 CMIE LL_USART_IsEnabledIT_CM + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CM(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_CMIE) == (USART_CR1_CMIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receiver Timeout Interrupt is enabled or disabled. + * @rmtoll CR1 RTOIE LL_USART_IsEnabledIT_RTO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RTO(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RTOIE) == (USART_CR1_RTOIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART End Of Block Interrupt is enabled or disabled. + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_IsEnabledIT_EOB + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_EOB(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_EOBIE) == (USART_CR1_EOBIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART TX FIFO Empty Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXFEIE LL_USART_IsEnabledIT_TXFE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXFE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TXFEIE) == (USART_CR1_TXFEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX FIFO Full Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXFFIE LL_USART_IsEnabledIT_RXFF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXFF(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RXFFIE) == (USART_CR1_RXFFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART LIN Break Detection Interrupt is enabled or disabled. + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_IsEnabledIT_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_LBD(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_LBDIE) == (USART_CR2_LBDIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Error Interrupt is enabled or disabled. + * @rmtoll CR3 EIE LL_USART_IsEnabledIT_ERROR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_ERROR(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_EIE) == (USART_CR3_EIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS Interrupt is enabled or disabled. + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_IsEnabledIT_CTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CTS(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Wake Up from Stop Mode Interrupt is enabled or disabled. + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_IsEnabledIT_WKUP + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_WKUP(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_WUFIE) == (USART_CR3_WUFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if USART TX FIFO Threshold Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTIE LL_USART_IsEnabledIT_TXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXFT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_TXFTIE) == (USART_CR3_TXFTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the Smartcard Transmission Complete Before Guard Time Interrupt is enabled or disabled. + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 TCBGTIE LL_USART_IsEnabledIT_TCBGT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TCBGT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_TCBGTIE) == (USART_CR3_TCBGTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if USART RX FIFO Threshold Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTIE LL_USART_IsEnabledIT_RXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXFT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_RXFTIE) == (USART_CR3_RXFTIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_DMA_Management DMA_Management + * @{ + */ + +/** + * @brief Enable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_EnableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Disable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_DisableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_RX(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Check if DMA Mode is enabled for reception + * @rmtoll CR3 DMAR LL_USART_IsEnabledDMAReq_RX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_RX(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DMAR) == (USART_CR3_DMAR)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_EnableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Disable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_DisableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_TX(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Check if DMA Mode is enabled for transmission + * @rmtoll CR3 DMAT LL_USART_IsEnabledDMAReq_TX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_TX(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DMAT) == (USART_CR3_DMAT)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_USART_EnableDMADeactOnRxErr + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMADeactOnRxErr(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Disable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_USART_DisableDMADeactOnRxErr + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMADeactOnRxErr(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Indicate if DMA Disabling on Reception Error is disabled + * @rmtoll CR3 DDRE LL_USART_IsEnabledDMADeactOnRxErr + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMADeactOnRxErr(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DDRE) == (USART_CR3_DDRE)) ? 1UL : 0UL); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll RDR RDR LL_USART_DMA_GetRegAddr\n + * @rmtoll TDR TDR LL_USART_DMA_GetRegAddr + * @param USARTx USART Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_USART_DMA_REG_DATA_TRANSMIT + * @arg @ref LL_USART_DMA_REG_DATA_RECEIVE + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_USART_DMA_GetRegAddr(const USART_TypeDef *USARTx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_USART_DMA_REG_DATA_TRANSMIT) + { + /* return address of TDR register */ + data_reg_addr = (uint32_t) &(USARTx->TDR); + } + else + { + /* return address of RDR register */ + data_reg_addr = (uint32_t) &(USARTx->RDR); + } + + return data_reg_addr; +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Read Receiver Data register (Receive Data value, 8 bits) + * @rmtoll RDR RDR LL_USART_ReceiveData8 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_USART_ReceiveData8(const USART_TypeDef *USARTx) +{ + return (uint8_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR) & 0xFFU); +} + +/** + * @brief Read Receiver Data register (Receive Data value, 9 bits) + * @rmtoll RDR RDR LL_USART_ReceiveData9 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x1FF + */ +__STATIC_INLINE uint16_t LL_USART_ReceiveData9(const USART_TypeDef *USARTx) +{ + return (uint16_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR)); +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 8 bits) + * @rmtoll TDR TDR LL_USART_TransmitData8 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData8(USART_TypeDef *USARTx, uint8_t Value) +{ + USARTx->TDR = Value; +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 9 bits) + * @rmtoll TDR TDR LL_USART_TransmitData9 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData9(USART_TypeDef *USARTx, uint16_t Value) +{ + USARTx->TDR = (uint16_t)(Value & 0x1FFUL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Execution Execution + * @{ + */ + +/** + * @brief Request an Automatic Baud Rate measurement on next received data frame + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll RQR ABRRQ LL_USART_RequestAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestAutoBaudRate(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_ABRRQ); +} + +/** + * @brief Request Break sending + * @rmtoll RQR SBKRQ LL_USART_RequestBreakSending + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestBreakSending(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_SBKRQ); +} + +/** + * @brief Put USART in mute mode and set the RWU flag + * @rmtoll RQR MMRQ LL_USART_RequestEnterMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestEnterMuteMode(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_MMRQ); +} + +/** + * @brief Request a Receive Data and FIFO flush + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @note Allows to discard the received data without reading them, and avoid an overrun + * condition. + * @rmtoll RQR RXFRQ LL_USART_RequestRxDataFlush + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestRxDataFlush(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_RXFRQ); +} + +/** + * @brief Request a Transmit data and FIFO flush + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll RQR TXFRQ LL_USART_RequestTxDataFlush + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestTxDataFlush(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_TXFRQ); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_USART_DeInit(const USART_TypeDef *USARTx); +ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, const LL_USART_InitTypeDef *USART_InitStruct); +void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct); +ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, const LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* USART1 || USART2 || USART3 || USART4 || USART5 || USART6 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_USART_H */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_usb.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_usb.h new file mode 100644 index 0000000..5e77e64 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_usb.h @@ -0,0 +1,914 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_usb.h + * @author MCD Application Team + * @brief Header file of USB Low Layer HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_USB_H +#define STM32G0xx_LL_USB_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal_def.h" + +#if defined (USB_DRD_FS) +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup USB_LL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +#ifndef HAL_USB_TIMEOUT +#define HAL_USB_TIMEOUT 0xF000000U +#endif /* define HAL_USB_TIMEOUT */ + +/** + * @brief USB Mode definition + */ + +typedef enum +{ + USB_DEVICE_MODE = 0, + USB_HOST_MODE = 1 +} USB_ModeTypeDef; + +/** + * @brief URB States definition + */ +typedef enum +{ + URB_IDLE = 0, + URB_DONE, + URB_NOTREADY, + URB_NYET, + URB_ERROR, + URB_STALL +} USB_URBStateTypeDef; + +/** + * @brief Host channel States definition + */ +typedef enum +{ + HC_IDLE = 0, + HC_XFRC, + HC_HALTED, + HC_ACK, + HC_NAK, + HC_NYET, + HC_STALL, + HC_XACTERR, + HC_BBLERR, + HC_DATATGLERR +} USB_HCStateTypeDef; + + +/** + * @brief USB Instance Initialization Structure definition + */ +typedef struct +{ + uint8_t dev_endpoints; /*!< Device Endpoints number. + This parameter depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t Host_channels; /*!< Host Channels number. + This parameter Depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t dma_enable; /*!< USB DMA state. + If DMA is not supported this parameter shall be set by default to zero */ + + uint8_t speed; /*!< USB Core speed. + This parameter can be any value of @ref PCD_Speed/HCD_Speed + (HCD_SPEED_xxx, HCD_SPEED_xxx) */ + + uint8_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */ + + uint8_t phy_itface; /*!< Select the used PHY interface. + This parameter can be any value of @ref PCD_PHY_Module/HCD_PHY_Module */ + + uint8_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ + + uint8_t low_power_enable; /*!< Enable or disable the low Power Mode. */ + + uint8_t lpm_enable; /*!< Enable or disable Link Power Management. */ + + uint8_t battery_charging_enable; /*!< Enable or disable Battery charging. */ + + uint8_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ + + uint8_t bulk_doublebuffer_enable; /*!< Enable or disable the double buffer mode on bulk EP */ + + uint8_t iso_singlebuffer_enable; /*!< Enable or disable the Single buffer mode on Isochronous EP */ +} USB_CfgTypeDef; + +typedef struct +{ + uint8_t num; /*!< Endpoint number + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t is_in; /*!< Endpoint direction + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t is_stall; /*!< Endpoint stall condition + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t type; /*!< Endpoint type + This parameter can be any value of @ref USB_LL_EP_Type */ + + uint8_t data_pid_start; /*!< Initial data PID + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + + uint16_t pmaadress; /*!< PMA Address + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint16_t pmaaddr0; /*!< PMA Address0 + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint16_t pmaaddr1; /*!< PMA Address1 + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint8_t doublebuffer; /*!< Double buffer enable + This parameter can be 0 or 1 */ + + + uint32_t maxpacket; /*!< Endpoint Max packet size + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ + + uint32_t xfer_len; /*!< Current transfer length */ + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ + + uint32_t xfer_len_db; /*!< double buffer transfer length used with bulk double buffer in */ + + uint8_t xfer_fill_db; /*!< double buffer Need to Fill new buffer used with bulk_in */ +} USB_EPTypeDef; + +typedef struct +{ + uint8_t dev_addr; /*!< USB device address. + This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ + + uint8_t phy_ch_num; /*!< Host channel number. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t ep_num; /*!< Endpoint number. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t ch_dir; /*!< channel direction + This parameter store the physical channel direction IN/OUT/BIDIR */ + + uint8_t speed; /*!< USB Host Channel speed. + This parameter can be any value of @ref HCD_Device_Speed: + (HCD_DEVICE_SPEED_xxx) */ + + uint8_t hub_port_nbr; /*!< USB HUB port number */ + uint8_t hub_addr; /*!< USB HUB address */ + + uint8_t ep_type; /*!< Endpoint Type. + This parameter can be any value of @ref USB_LL_EP_Type */ + + uint16_t max_packet; /*!< Endpoint Max packet size. + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t data_pid; /*!< Initial data PID. + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ + + uint32_t xfer_len; /*!< Current transfer length. */ + + uint32_t xfer_len_db; /*!< Current transfer length used in double buffer mode. */ + + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ + + uint8_t toggle_in; /*!< IN transfer current toggle flag. + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t toggle_out; /*!< OUT transfer current toggle flag + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint32_t ErrCnt; /*!< Host channel error count. */ + + uint16_t pmaadress; /*!< PMA Address + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint16_t pmaaddr0; /*!< PMA Address0 + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint16_t pmaaddr1; /*!< PMA Address1 + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint8_t doublebuffer; /*!< Double buffer enable + This parameter can be 0 or 1 */ + + USB_URBStateTypeDef urb_state; /*!< URB state. + This parameter can be any value of @ref USB_URBStateTypeDef */ + + USB_HCStateTypeDef state; /*!< Host Channel state. + This parameter can be any value of @ref USB_HCStateTypeDef */ +} USB_HCTypeDef; + +typedef USB_ModeTypeDef USB_DRD_ModeTypeDef; +typedef USB_CfgTypeDef USB_DRD_CfgTypeDef; +typedef USB_EPTypeDef USB_DRD_EPTypeDef; +typedef USB_URBStateTypeDef USB_DRD_URBStateTypeDef; +typedef USB_HCStateTypeDef USB_DRD_HCStateTypeDef; +typedef USB_HCTypeDef USB_DRD_HCTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PCD_Exported_Constants PCD Exported Constants + * @{ + */ +/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS + * @{ + */ +#define EP_MPS_64 0U +#define EP_MPS_32 1U +#define EP_MPS_16 2U +#define EP_MPS_8 3U +/** + * @} + */ + +/** @defgroup USB_LL_EP_Type USB Low Layer EP Type + * @{ + */ +#define EP_TYPE_CTRL 0U +#define EP_TYPE_ISOC 1U +#define EP_TYPE_BULK 2U +#define EP_TYPE_INTR 3U +#define EP_TYPE_MSK 3U +/** + * @} + */ + +/** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed + * @{ + */ +#define EP_SPEED_LOW 0U +#define EP_SPEED_FULL 1U +#define EP_SPEED_HIGH 2U +/** + * @} + */ + +/** @defgroup USB_LL_CH_PID_Type USB Low Layer Channel PID Type + * @{ + */ +#define HC_PID_DATA0 0U +#define HC_PID_DATA2 1U +#define HC_PID_DATA1 2U +#define HC_PID_SETUP 3U +/** + * @} + */ + +/** @defgroup USB_LL Device Speed + * @{ + */ +#define USBD_FS_SPEED 2U +#define USBH_FSLS_SPEED 1U +/** + * @} + */ + +#define EP_ADDR_MSK 0x7U + +#ifndef USE_USB_DOUBLE_BUFFER +#define USE_USB_DOUBLE_BUFFER 1U +#endif /* USE_USB_DOUBLE_BUFFER */ + +#define USB_EMBEDDED_PHY 2U + +/*!< USB Speed */ +#define USB_DRD_SPEED_FS 1U +#define USB_DRD_SPEED_LS 2U +#define USB_DRD_SPEED_LSFS 3U + +/*!< Channel Direction */ +#define CH_IN_DIR 1U +#define CH_OUT_DIR 0U + +/*!< Number of used channels in the Application */ +#ifndef USB_DRD_USED_CHANNELS +#define USB_DRD_USED_CHANNELS 8U +#endif /* USB_DRD_USED_CHANNELS */ + +/** + * used for USB_HC_DoubleBuffer API + */ +#define USB_DRD_BULK_DBUFF_ENBALE 1U +#define USB_DRD_BULK_DBUFF_DISABLE 2U +#define USB_DRD_ISOC_DBUFF_ENBALE 3U +#define USB_DRD_ISOC_DBUFF_DISABLE 4U + +/* First available address in PMA */ +#define PMA_START_ADDR (0x10U + (8U *(USB_DRD_USED_CHANNELS - 2U))) +#define PMA_END_ADDR USB_DRD_PMA_SIZE + +/* Exported macro ------------------------------------------------------------*/ +/** + * @} + */ +/******************** Bit definition for USB_COUNTn_RX register *************/ +#define USB_CNTRX_NBLK_MSK (0x1FU << 26) +#define USB_CNTRX_BLSIZE (0x1U << 31) + + +/*Set Channel/Endpoint to the USB Register */ +#define USB_DRD_SET_CHEP(USBx, bEpChNum, wRegValue) (*(__IO uint32_t *)\ + (&(USBx)->CHEP0R + (bEpChNum)) = (uint32_t)(wRegValue)) + +/*Get Channel/Endpoint from the USB Register */ +#define USB_DRD_GET_CHEP(USBx, bEpChNum) (*(__IO uint32_t *)(&(USBx)->CHEP0R + (bEpChNum))) + + +/** + * @brief free buffer used from the application realizing it to the line + * toggles bit SW_BUF in the double buffered endpoint register + * @param USBx USB device. + * @param bEpChNum, bDir + * @retval None + */ +#define USB_DRD_FREE_USER_BUFFER(USBx, bEpChNum, bDir) \ + do { \ + if ((bDir) == 0U) \ + { \ + /* OUT double buffered endpoint */ \ + USB_DRD_TX_DTOG((USBx), (bEpChNum)); \ + } \ + else if ((bDir) == 1U) \ + { \ + /* IN double buffered endpoint */ \ + USB_DRD_RX_DTOG((USBx), (bEpChNum)); \ + } \ + } while(0) + + +/** + * @brief Set the Setup bit in the corresponding channel, when a Setup + transaction is needed. + * @param USBx USB device. + * @param bEpChNum + * @retval None + */ +#define USB_DRD_CHEP_TX_SETUP(USBx, bEpChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) ; \ + \ + /* Set Setup bit */ \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_SETUP)); \ + } while(0) + + +/** + * @brief Clears bit ERR_RX in the Channel register + * @param USBx USB peripheral instance register address. + * @param bChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_CLEAR_CHEP_RX_ERR(USBx, bChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bChNum)); \ + _wRegVal = (_wRegVal & USB_CHEP_REG_MASK & (~USB_CHEP_ERRRX) & (~USB_CHEP_VTRX)) | \ + (USB_CHEP_VTTX | USB_CHEP_ERRTX); \ + \ + USB_DRD_SET_CHEP((USBx), (bChNum), _wRegVal); \ + } while(0) /* USB_DRD_CLEAR_CHEP_RX_ERR */ + + +/** + * @brief Clears bit ERR_TX in the Channel register + * @param USBx USB peripheral instance register address. + * @param bChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_CLEAR_CHEP_TX_ERR(USBx, bChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bChNum)); \ + _wRegVal = (_wRegVal & USB_CHEP_REG_MASK & (~USB_CHEP_ERRTX) & (~USB_CHEP_VTTX)) | \ + (USB_CHEP_VTRX|USB_CHEP_ERRRX); \ + \ + USB_DRD_SET_CHEP((USBx), (bChNum), _wRegVal); \ + } while(0) /* USB_DRD_CLEAR_CHEP_TX_ERR */ + + +/** + * @brief sets the status for tx transfer (bits STAT_TX[1:0]). + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @param wState new state + * @retval None + */ +#define USB_DRD_SET_CHEP_TX_STATUS(USBx, bEpChNum, wState) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_CHEP_TX_DTOGMASK; \ + /* toggle first bit ? */ \ + if ((USB_CHEP_TX_DTOG1 & (wState)) != 0U) \ + { \ + _wRegVal ^= USB_CHEP_TX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if ((USB_CHEP_TX_DTOG2 & (wState)) != 0U) \ + { \ + _wRegVal ^= USB_CHEP_TX_DTOG2; \ + } \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_VTRX| USB_CHEP_VTTX)); \ + } while(0) /* USB_DRD_SET_CHEP_TX_STATUS */ + + +/** + * @brief sets the status for rx transfer (bits STAT_TX[1:0]) + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @param wState new state + * @retval None + */ +#define USB_DRD_SET_CHEP_RX_STATUS(USBx, bEpChNum, wState) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_CHEP_RX_DTOGMASK; \ + /* toggle first bit ? */ \ + if ((USB_CHEP_RX_DTOG1 & (wState)) != 0U) \ + { \ + _wRegVal ^= USB_CHEP_RX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if ((USB_CHEP_RX_DTOG2 & (wState)) != 0U) \ + { \ + _wRegVal ^= USB_CHEP_RX_DTOG2; \ + } \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_VTRX | USB_CHEP_VTTX)); \ + } while(0) /* USB_DRD_SET_CHEP_RX_STATUS */ + + +/** + * @brief gets the status for tx/rx transfer (bits STAT_TX[1:0] + * /STAT_RX[1:0]) + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval status + */ +#define USB_DRD_GET_CHEP_TX_STATUS(USBx, bEpChNum) \ + ((uint16_t)USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_DRD_CHEP_TX_STTX) + +#define USB_DRD_GET_CHEP_RX_STATUS(USBx, bEpChNum) \ + ((uint16_t)USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_DRD_CHEP_RX_STRX) + + +/** + * @brief set EP_KIND bit. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_SET_CHEP_KIND(USBx, bEpChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_CHEP_REG_MASK; \ + \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_VTRX | USB_CHEP_VTTX | USB_CHEP_KIND)); \ + } while(0) /* USB_DRD_SET_CHEP_KIND */ + + +/** + * @brief clear EP_KIND bit. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_CLEAR_CHEP_KIND(USBx, bEpChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_EP_KIND_MASK; \ + \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_VTRX | USB_CHEP_VTTX)); \ + } while(0) /* USB_DRD_CLEAR_CHEP_KIND */ + + +/** + * @brief Clears bit CTR_RX / CTR_TX in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_CLEAR_RX_CHEP_CTR(USBx, bEpChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & (0xFFFF7FFFU & USB_CHEP_REG_MASK); \ + \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_VTTX)); \ + } while(0) /* USB_CLEAR_RX_CHEP_CTR */ + +#define USB_DRD_CLEAR_TX_CHEP_CTR(USBx, bEpChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & (0xFFFFFF7FU & USB_CHEP_REG_MASK); \ + \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_VTRX)); \ + } while(0) /* USB_CLEAR_TX_CHEP_CTR */ + + +/** + * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_RX_DTOG(USBx, bEpChNum) \ + do { \ + uint32_t _wEPVal; \ + \ + _wEPVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_CHEP_REG_MASK; \ + \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wEPVal | USB_CHEP_VTRX | USB_CHEP_VTTX | USB_CHEP_DTOG_RX)); \ + } while(0) /* USB_DRD_RX_DTOG */ + +#define USB_DRD_TX_DTOG(USBx, bEpChNum) \ + do { \ + uint32_t _wEPVal; \ + \ + _wEPVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_CHEP_REG_MASK; \ + \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wEPVal | USB_CHEP_VTRX | USB_CHEP_VTTX | USB_CHEP_DTOG_TX)); \ + } while(0) /* USB_TX_DTOG */ + + +/** + * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_CLEAR_RX_DTOG(USBx, bEpChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)); \ + \ + if ((_wRegVal & USB_CHEP_DTOG_RX) != 0U) \ + { \ + USB_DRD_RX_DTOG((USBx), (bEpChNum)); \ + } \ + } while(0) /* USB_DRD_CLEAR_RX_DTOG */ + +#define USB_DRD_CLEAR_TX_DTOG(USBx, bEpChNum) \ + do { \ + uint32_t _wRegVal; \ + \ + _wRegVal = USB_DRD_GET_CHEP((USBx), (bEpChNum)); \ + \ + if ((_wRegVal & USB_CHEP_DTOG_TX) != 0U) \ + { \ + USB_DRD_TX_DTOG((USBx), (bEpChNum)); \ + } \ + } while(0) /* USB_DRD_CLEAR_TX_DTOG */ + + +/** + * @brief Sets address in an endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @param bAddr Address. + * @retval None + */ +#define USB_DRD_SET_CHEP_ADDRESS(USBx, bEpChNum, bAddr) \ + do { \ + uint32_t _wRegVal; \ + \ + /*Read the USB->CHEPx into _wRegVal, Reset(DTOGRX/STRX/DTOGTX/STTX) and set the EpAddress*/ \ + _wRegVal = (USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_CHEP_REG_MASK) | (bAddr); \ + \ + /*Set _wRegVal in USB->CHEPx and set Transmit/Receive Valid Transfer (x=bEpChNum)*/ \ + USB_DRD_SET_CHEP((USBx), (bEpChNum), (_wRegVal | USB_CHEP_VTRX | USB_CHEP_VTTX)); \ + } while(0) /* USB_DRD_SET_CHEP_ADDRESS */ + + +/* PMA API Buffer Descriptor Management ------------------------------------------------------------*/ +/* Buffer Descriptor Table TXBD0/RXBD0 --- > TXBD7/RXBD7 8 possible descriptor +* The buffer descriptor is located inside the packet buffer memory (USB_PMA_BUFF) +* TXBD [Reserve |Countx| Address_Tx] +* RXBD [BLSIEZ|NUM_Block |CounRx| Address_Rx] */ + +/* Set TX Buffer Descriptor Address Field */ +#define USB_DRD_SET_CHEP_TX_ADDRESS(USBx, bEpChNum, wAddr) \ + do { \ + /* Reset old Address */ \ + (USB_DRD_PMA_BUFF + (bEpChNum))->TXBD &= USB_PMA_TXBD_ADDMSK; \ + \ + /* Bit0 & Bit1 should be =0 PMA must be Word aligned */ \ + (USB_DRD_PMA_BUFF + (bEpChNum))->TXBD |= (uint32_t)(((uint32_t)(wAddr) >> 2U) << 2U); \ + } while(0) /* USB_DRD_SET_CHEP_TX_ADDRESS */ + +/* Set RX Buffer Descriptor Address Field */ +#define USB_DRD_SET_CHEP_RX_ADDRESS(USBx, bEpChNum, wAddr) \ + do { \ + /* Reset old Address */ \ + (USB_DRD_PMA_BUFF + (bEpChNum))->RXBD &= USB_PMA_RXBD_ADDMSK; \ + \ + /* Bit0 & Bit1 should be =0 PMA must be Word aligned */ \ + (USB_DRD_PMA_BUFF + (bEpChNum))->RXBD |= (uint32_t)(((uint32_t)(wAddr) >> 2U) << 2U); \ + } while(0) /* USB_SET_CHEP_RX_ADDRESS */ + + +/** + * @brief Sets counter of rx buffer with no. of blocks. + * @param pdwReg Register pointer + * @param wCount Counter. + * @param wNBlocks no. of Blocks. + * @retval None + */ +#define USB_DRD_CALC_BLK32(pdwReg, wCount, wNBlocks) \ + do { \ + /* Divide PacketSize by 32 to calculate the Nb of Block32 */ \ + (wNBlocks) =((uint32_t)(wCount) >> 5U); \ + if (((uint32_t)(wCount) % 32U) == 0U) \ + { \ + (wNBlocks)--; \ + } \ + \ + (pdwReg)|= (uint32_t)((((wNBlocks) << 26U)) | USB_CNTRX_BLSIZE); \ + } while(0) /* USB_DRD_CALC_BLK32 */ + +#define USB_DRD_CALC_BLK2(pdwReg, wCount, wNBlocks) \ + do { \ + /* Divide PacketSize by 32 to calculate the Nb of Block32 */ \ + (wNBlocks) = (uint32_t)((uint32_t)(wCount) >> 1U); \ + if (((wCount) & 0x1U) != 0U) \ + { \ + (wNBlocks)++; \ + } \ + (pdwReg) |= (uint32_t)((wNBlocks) << 26U); \ + } while(0) /* USB_DRD_CALC_BLK2 */ + +#define USB_DRD_SET_CHEP_CNT_RX_REG(pdwReg, wCount) \ + do { \ + uint32_t wNBlocks; \ + \ + (pdwReg) &= ~(USB_CNTRX_BLSIZE | USB_CNTRX_NBLK_MSK); \ + \ + if ((wCount) > 62U) \ + { \ + USB_DRD_CALC_BLK32((pdwReg), (wCount), wNBlocks); \ + } \ + else \ + { \ + if ((wCount) == 0U) \ + { \ + (pdwReg) |= USB_CNTRX_BLSIZE; \ + } \ + else \ + { \ + USB_DRD_CALC_BLK2((pdwReg), (wCount), wNBlocks); \ + } \ + } \ + } while(0) /* USB_DRD_SET_CHEP_CNT_RX_REG */ + + +/** + * @brief sets counter for the tx/rx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @param wCount Counter value. + * @retval None + */ +#define USB_DRD_SET_CHEP_TX_CNT(USBx,bEpChNum, wCount) \ + do { \ + /* Reset old TX_Count value */ \ + (USB_DRD_PMA_BUFF + (bEpChNum))->TXBD &= USB_PMA_TXBD_COUNTMSK; \ + \ + /* Set the wCount in the dedicated EP_TXBuffer */ \ + (USB_DRD_PMA_BUFF + (bEpChNum))->TXBD |= (uint32_t)((uint32_t)(wCount) << 16U); \ + } while(0) + +#define USB_DRD_SET_CHEP_RX_DBUF0_CNT(USBx, bEpChNum, wCount) \ + USB_DRD_SET_CHEP_CNT_RX_REG(((USB_DRD_PMA_BUFF + (bEpChNum))->TXBD), (wCount)) + +#define USB_DRD_SET_CHEP_RX_CNT(USBx, bEpChNum, wCount) \ + USB_DRD_SET_CHEP_CNT_RX_REG(((USB_DRD_PMA_BUFF + (bEpChNum))->RXBD), (wCount)) + +/** + * @brief gets counter of the tx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval Counter value + */ +#define USB_DRD_GET_CHEP_TX_CNT(USBx, bEpChNum) (((USB_DRD_PMA_BUFF + (bEpChNum))->TXBD & 0x03FF0000U) >> 16U) +#define USB_DRD_GET_CHEP_RX_CNT(USBx, bEpChNum) (((USB_DRD_PMA_BUFF + (bEpChNum))->RXBD & 0x03FF0000U) >> 16U) + +#define USB_DRD_GET_EP_TX_CNT USB_GET_CHEP_TX_CNT +#define USB_DRD_GET_CH_TX_CNT USB_GET_CHEP_TX_CNT + +#define USB_DRD_GET_EP_RX_CNT USB_DRD_GET_CHEP_RX_CNT +#define USB_DRD_GET_CH_RX_CNT USB_DRD_GET_CHEP_RX_CNT +/** + * @brief Sets buffer 0/1 address in a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @param wBuf0Addr buffer 0 address. + * @retval Counter value + */ +#define USB_DRD_SET_CHEP_DBUF0_ADDR(USBx, bEpChNum, wBuf0Addr) \ + USB_DRD_SET_CHEP_TX_ADDRESS((USBx), (bEpChNum), (wBuf0Addr)) + +#define USB_DRD_SET_CHEP_DBUF1_ADDR(USBx, bEpChNum, wBuf1Addr) \ + USB_DRD_SET_CHEP_RX_ADDRESS((USBx), (bEpChNum), (wBuf1Addr)) + + +/** + * @brief Sets addresses in a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @param wBuf0Addr: buffer 0 address. + * @param wBuf1Addr = buffer 1 address. + * @retval None + */ +#define USB_DRD_SET_CHEP_DBUF_ADDR(USBx, bEpChNum, wBuf0Addr, wBuf1Addr) \ + do { \ + USB_DRD_SET_CHEP_DBUF0_ADDR((USBx), (bEpChNum), (wBuf0Addr)); \ + USB_DRD_SET_CHEP_DBUF1_ADDR((USBx), (bEpChNum), (wBuf1Addr)); \ + } while(0) /* USB_DRD_SET_CHEP_DBUF_ADDR */ + + +/** + * @brief Gets buffer 0/1 address of a double buffer endpoint. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @param bDir endpoint dir EP_DBUF_OUT = OUT + * EP_DBUF_IN = IN + * @param wCount: Counter value + * @retval None + */ +#define USB_DRD_SET_CHEP_DBUF0_CNT(USBx, bEpChNum, bDir, wCount) \ + do { \ + if ((bDir) == 0U) \ + { \ + /* OUT endpoint */ \ + USB_DRD_SET_CHEP_RX_DBUF0_CNT((USBx), (bEpChNum), (wCount)); \ + } \ + else \ + { \ + if ((bDir) == 1U) \ + { \ + /* IN endpoint */ \ + USB_DRD_SET_CHEP_TX_CNT((USBx), (bEpChNum), (wCount)); \ + } \ + } \ + } while(0) /* USB_DRD_SET_CHEP_DBUF0_CNT */ + +#define USB_DRD_SET_CHEP_DBUF1_CNT(USBx, bEpChNum, bDir, wCount) \ + do { \ + if ((bDir) == 0U) \ + { \ + /* OUT endpoint */ \ + USB_DRD_SET_CHEP_RX_CNT((USBx), (bEpChNum), (wCount)); \ + } \ + else \ + { \ + if ((bDir) == 1U) \ + { \ + /* IN endpoint */ \ + (USB_DRD_PMA_BUFF + (bEpChNum))->RXBD &= USB_PMA_TXBD_COUNTMSK; \ + (USB_DRD_PMA_BUFF + (bEpChNum))->RXBD |= (uint32_t)((uint32_t)(wCount) << 16U); \ + } \ + } \ + } while(0) /* USB_DRD_SET_CHEP_DBUF1_CNT */ + +#define USB_DRD_SET_CHEP_DBUF_CNT(USBx, bEpChNum, bDir, wCount) \ + do { \ + USB_DRD_SET_CHEP_DBUF0_CNT((USBx), (bEpChNum), (bDir), (wCount)); \ + USB_DRD_SET_CHEP_DBUF1_CNT((USBx), (bEpChNum), (bDir), (wCount)); \ + } while(0) /* USB_DRD_SET_EPCH_DBUF_CNT */ + +/** + * @brief Gets buffer 0/1 rx/tx counter for double buffering. + * @param USBx USB peripheral instance register address. + * @param bEpChNum Endpoint Number. + * @retval None + */ +#define USB_DRD_GET_CHEP_DBUF0_CNT(USBx, bEpChNum) (USB_DRD_GET_CHEP_TX_CNT((USBx), (bEpChNum))) +#define USB_DRD_GET_CHEP_DBUF1_CNT(USBx, bEpChNum) (USB_DRD_GET_CHEP_RX_CNT((USBx), (bEpChNum))) + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions + * @{ + */ + + +HAL_StatusTypeDef USB_CoreInit(USB_DRD_TypeDef *USBx, USB_DRD_CfgTypeDef cfg); +HAL_StatusTypeDef USB_DevInit(USB_DRD_TypeDef *USBx, USB_DRD_CfgTypeDef cfg); +HAL_StatusTypeDef USB_EnableGlobalInt(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_DisableGlobalInt(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_SetCurrentMode(USB_DRD_TypeDef *USBx, USB_DRD_ModeTypeDef mode); + +HAL_StatusTypeDef USB_FlushRxFifo(USB_DRD_TypeDef const *USBx); +HAL_StatusTypeDef USB_FlushTxFifo(USB_DRD_TypeDef const *USBx, uint32_t num); + +#if defined (HAL_PCD_MODULE_ENABLED) +HAL_StatusTypeDef USB_ActivateEndpoint(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep); +HAL_StatusTypeDef USB_DeactivateEndpoint(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPStartXfer(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPSetStall(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPClearStall(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPStopXfer(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep); +#endif /* defined (HAL_PCD_MODULE_ENABLED) */ + +HAL_StatusTypeDef USB_SetDevAddress(USB_DRD_TypeDef *USBx, uint8_t address); +HAL_StatusTypeDef USB_DevConnect(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_DevDisconnect(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_StopDevice(USB_DRD_TypeDef *USBx); +uint32_t USB_ReadInterrupts(USB_DRD_TypeDef const *USBx); + +HAL_StatusTypeDef USB_ResetPort(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_HostInit(USB_DRD_TypeDef *USBx, USB_DRD_CfgTypeDef cfg); +HAL_StatusTypeDef USB_HC_IN_Halt(USB_DRD_TypeDef *USBx, uint8_t phy_ch); +HAL_StatusTypeDef USB_HC_OUT_Halt(USB_DRD_TypeDef *USBx, uint8_t phy_ch); +HAL_StatusTypeDef USB_HC_StartXfer(USB_DRD_TypeDef *USBx, USB_DRD_HCTypeDef *hc); + +uint32_t USB_GetHostSpeed(USB_DRD_TypeDef const *USBx); +uint32_t USB_GetCurrentFrame(USB_DRD_TypeDef const *USBx); +HAL_StatusTypeDef USB_StopHost(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_HC_DoubleBuffer(USB_DRD_TypeDef *USBx, uint8_t phy_ch_num, uint8_t db_state); +HAL_StatusTypeDef USB_HC_Init(USB_DRD_TypeDef *USBx, uint8_t phy_ch_num, uint8_t epnum, + uint8_t dev_address, uint8_t speed, uint8_t ep_type, uint16_t mps); + +HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_DRD_TypeDef *USBx); +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_DRD_TypeDef *USBx); + +void USB_WritePMA(USB_DRD_TypeDef const *USBx, uint8_t *pbUsrBuf, + uint16_t wPMABufAddr, uint16_t wNBytes); + +void USB_ReadPMA(USB_DRD_TypeDef const *USBx, uint8_t *pbUsrBuf, + uint16_t wPMABufAddr, uint16_t wNBytes); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_DRD_FS) */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + + +#endif /* STM32G0xx_LL_USB_H */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_utils.h b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_utils.h new file mode 100644 index 0000000..c0dd8bc --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_utils.h @@ -0,0 +1,343 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_utils.h + * @author MCD Application Team + * @brief Header file of UTILS LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL UTILS driver contains a set of generic APIs that can be + used by user: + (+) Device electronic signature + (+) Timing functions + (+) PLL configuration functions + + @endverbatim + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_LL_UTILS_H +#define STM32G0xx_LL_UTILS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx.h" + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +/** @defgroup UTILS_LL UTILS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants + * @{ + */ + +/* Max delay can be used in LL_mDelay */ +#define LL_MAX_DELAY 0xFFFFFFFFU + +/** + * @brief Unique device ID register base address + */ +#define UID_BASE_ADDRESS UID_BASE + +/** + * @brief Flash size data register base address + */ +#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE + +/** + * @brief Package data register base address + */ +#define PACKAGE_BASE_ADDRESS PACKAGE_BASE + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros + * @{ + */ +/** + * @} + */ +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures + * @{ + */ +/** + * @brief UTILS PLL structure definition + */ +typedef struct +{ + uint32_t PLLM; /*!< Division factor for PLL VCO input clock. + This parameter can be a value of @ref RCC_LL_EC_PLLM_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL_ConfigDomain_SYS(). */ + + uint32_t PLLN; /*!< Multiplication factor for PLL VCO output clock. + This parameter must be a number between Min_Data = 8 and Max_Data = 86 + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL_ConfigDomain_SYS(). */ + + uint32_t PLLR; /*!< Division for the main system clock. + This parameter can be a value of @ref RCC_LL_EC_PLLR_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL_ConfigDomain_SYS(). */ +} LL_UTILS_PLLInitTypeDef; + +/** + * @brief UTILS System, AHB and APB buses clock configuration structure definition + */ +typedef struct +{ + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAHBPrescaler(). */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB1_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB1Prescaler(). */ +} LL_UTILS_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants + * @{ + */ + +/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation + * @{ + */ +#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */ +#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */ +/** + * @} + */ + +/** @defgroup UTILS_EC_PACKAGETYPE PACKAGE TYPE + * @{ + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define LL_UTILS_PACKAGETYPE_QFP100 0x00000000U /*!< LQFP100 package type */ +#define LL_UTILS_PACKAGETYPE_QFN32_GP 0x00000001U /*!< LQFP32/UFQFPN32 General purpose (GP) */ +#define LL_UTILS_PACKAGETYPE_QFN32_N 0x00000002U /*!< LQFP32/UFQFPN32 N-version */ +#define LL_UTILS_PACKAGETYPE_QFN48_GP 0x00000004U /*!< LQFP48/UFQPN48 General purpose (GP) */ +#define LL_UTILS_PACKAGETYPE_QFN48_N 0x00000005U /*!< LQFP48/UFQPN48 N-version */ +#define LL_UTILS_PACKAGETYPE_WLCSP52 0x00000006U /*!< WLCSP52 */ +#define LL_UTILS_PACKAGETYPE_QFN64_GP 0x00000007U /*!< LQFP64 General purpose (GP) */ +#define LL_UTILS_PACKAGETYPE_QFN64_N 0x00000008U /*!< LQFP64 N-version */ +#define LL_UTILS_PACKAGETYPE_BGA64_N 0x0000000AU /*!< UFBGA64 N-version */ +#define LL_UTILS_PACKAGETYPE_QFP80 0x0000000BU /*!< LQFP80 package type */ +#define LL_UTILS_PACKAGETYPE_BGA100 0x0000000CU /*!< UBGA100 package type */ +#elif defined(STM32G061xx) || defined(STM32G051xx) || defined(STM32G050xx) || defined(STM32G041xx) || defined(STM32G031xx) || defined(STM32G030xx) +#define LL_UTILS_PACKAGETYPE_SO8 0x00000001U /*!< SO8 package type */ +#define LL_UTILS_PACKAGETYPE_WLCSP18 0x00000002U /*!< WLCSP18 package type */ +#define LL_UTILS_PACKAGETYPE_TSSOP20 0x00000003U /*!< TSSOP20 package type */ +#define LL_UTILS_PACKAGETYPE_QFP28 0x00000004U /*!< UFQFPN28 package type */ +#define LL_UTILS_PACKAGETYPE_QFN32 0x00000005U /*!< UFQFPN32 / LQFP32 package type */ +#define LL_UTILS_PACKAGETYPE_QFN48 0x00000007U /*!< UFQFPN48 / LQFP48 package type */ +#elif defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G070xx) +#define LL_UTILS_PACKAGETYPE_QFN28_GP 0x00000000U /*!< UFQFPN28 general purpose (GP) package type */ +#define LL_UTILS_PACKAGETYPE_QFN28_PD 0x00000001U /*!< UFQFPN28 Power Delivery (PD) */ +#define LL_UTILS_PACKAGETYPE_QFN32_GP 0x00000004U /*!< UFQFPN32 / LQFP32 general purpose (GP) package type */ +#define LL_UTILS_PACKAGETYPE_QFN32_PD 0x00000005U /*!< UFQFPN32 / LQFP32 Power Delivery (PD) package type */ +#define LL_UTILS_PACKAGETYPE_QFN48 0x00000008U /*!< UFQFPN48 / LQFP488 package type */ +#define LL_UTILS_PACKAGETYPE_QFP64 0x0000000CU /*!< LQPF64 package type */ +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions + * @{ + */ + +/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE + * @{ + */ + +/** + * @brief Get Word0 of the unique device identifier (UID based on 96 bits) + * @retval UID[31:0]: X and Y coordinates on the wafer expressed in BCD format + */ +__STATIC_INLINE uint32_t LL_GetUID_Word0(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS))); +} + +/** + * @brief Get Word1 of the unique device identifier (UID based on 96 bits) + * @retval UID[63:32]: Wafer number (UID[39:32]) & LOT_NUM[23:0] (UID[63:40]) + */ +__STATIC_INLINE uint32_t LL_GetUID_Word1(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U)))); +} + +/** + * @brief Get Word2 of the unique device identifier (UID based on 96 bits) + * @retval UID[95:64]: Lot number (ASCII encoded) - LOT_NUM[55:24] + */ +__STATIC_INLINE uint32_t LL_GetUID_Word2(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U)))); +} + +/** + * @brief Get Flash memory size + * @note This bitfield indicates the size of the device Flash memory expressed in + * Kbytes. As an example, 0x040 corresponds to 64 Kbytes. + * @retval FLASH_SIZE[15:0]: Flash memory size + */ +__STATIC_INLINE uint32_t LL_GetFlashSize(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)) & 0x0000FFFFUL); +} + +/** + * @brief Get Package type + * @retval PKG[3:0]: Package type - This parameter can be a value of @ref UTILS_EC_PACKAGETYPE + * @if defined(STM32G0C1xx) + * @arg @ref LL_UTILS_PACKAGETYPE_QFP100 + * @arg @ref LL_UTILS_PACKAGETYPE_QFN32_GP + * @arg @ref LL_UTILS_PACKAGETYPE_QFN32_N + * @arg @ref LL_UTILS_PACKAGETYPE_QFN48_GP + * @arg @ref LL_UTILS_PACKAGETYPE_QFN48_N + * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP52 + * @arg @ref LL_UTILS_PACKAGETYPE_QFN64_GP + * @arg @ref LL_UTILS_PACKAGETYPE_QFN64_N + * @arg @ref LL_UTILS_PACKAGETYPE_BGA64_N + * @arg @ref LL_UTILS_PACKAGETYPE_QFP80 + * @arg @ref LL_UTILS_PACKAGETYPE_BGA100 + * @elif defined(STM32G061xx) || defined(STM32G041xx) + * @arg @ref LL_UTILS_PACKAGETYPE_SO8 + * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP18 + * @arg @ref LL_UTILS_PACKAGETYPE_TSSOP20 + * @arg @ref LL_UTILS_PACKAGETYPE_QFP28 + * @arg @ref LL_UTILS_PACKAGETYPE_QFN32 + * @arg @ref LL_UTILS_PACKAGETYPE_QFN48 + * @elif defined(STM32G081xx) + * @arg @ref LL_UTILS_PACKAGETYPE_QFN28_GP + * @arg @ref LL_UTILS_PACKAGETYPE_QFN28_PD + * @arg @ref LL_UTILS_PACKAGETYPE_QFN32_GP + * @arg @ref LL_UTILS_PACKAGETYPE_QFN32_PD + * @arg @ref LL_UTILS_PACKAGETYPE_QFN48 + * @arg @ref LL_UTILS_PACKAGETYPE_QFP64 + * @endif + * + */ +__STATIC_INLINE uint32_t LL_GetPackageType(void) +{ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) + return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0x1FU); +#else + return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0xFU); +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +} + +/** + * @} + */ + +/** @defgroup UTILS_LL_EF_DELAY DELAY + * @{ + */ + +/** + * @brief This function configures the Cortex-M SysTick source of the time base. + * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro) + * @note When a RTOS is used, it is recommended to avoid changing the SysTick + * configuration by calling this function, for a delay use rather osDelay RTOS service. + * @param Ticks Frequency of Ticks (Hz) + * @retval None + */ +__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks) +{ + /* Configure the SysTick to have interrupt in 1ms time base */ + SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */ +} + +void LL_Init1msTick(uint32_t HCLKFrequency); +void LL_mDelay(uint32_t Delay); + +/** + * @} + */ + +/** @defgroup UTILS_EF_SYSTEM SYSTEM + * @{ + */ + +void LL_SetSystemCoreClock(uint32_t HCLKFrequency); +ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass, + LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +ErrorStatus LL_SetFlashLatency(uint32_t HCLKFrequency); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_LL_UTILS_H */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c new file mode 100644 index 0000000..9606aa5 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c @@ -0,0 +1,760 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal.c + * @author MCD Application Team + * @brief HAL module driver. + * This is the common part of the HAL initialization + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The common HAL driver contains a set of generic and common APIs that can be + used by the PPP peripheral drivers and the user to start using the HAL. + [..] + The HAL contains two APIs categories: + (+) Common HAL APIs + (+) Services HAL APIs + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup HAL + * @brief HAL module driver + * @{ + */ + +#ifdef HAL_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup HAL_Private_Constants HAL Private Constants + * @{ + */ +/** + * @brief STM32G0xx HAL Driver version number + */ +#define __STM32G0xx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */ +#define __STM32G0xx_HAL_VERSION_SUB1 (0x04U) /*!< [23:16] sub1 version */ +#define __STM32G0xx_HAL_VERSION_SUB2 (0x06U) /*!< [15:8] sub2 version */ +#define __STM32G0xx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */ +#define __STM32G0xx_HAL_VERSION ((__STM32G0xx_HAL_VERSION_MAIN << 24U)\ + |(__STM32G0xx_HAL_VERSION_SUB1 << 16U)\ + |(__STM32G0xx_HAL_VERSION_SUB2 << 8U )\ + |(__STM32G0xx_HAL_VERSION_RC)) + +#if defined(VREFBUF) +#define VREFBUF_TIMEOUT_VALUE 10U /*!< 10 ms */ +#endif /* VREFBUF */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Exported variables ---------------------------------------------------------*/ +/** @defgroup HAL_Exported_Variables HAL Exported Variables + * @{ + */ +__IO uint32_t uwTick; +uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */ +HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup HAL_Exported_Functions + * @{ + */ + +/** @addtogroup HAL_Exported_Functions_Group1 + * @brief HAL Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### HAL Initialization and Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the Flash interface the NVIC allocation and initial time base + clock configuration. + (+) De-initialize common part of the HAL. + (+) Configure the time base source to have 1ms time base with a dedicated + Tick interrupt priority. + (++) SysTick timer is used by default as source of time base, but user + can eventually implement his proper time base source (a general purpose + timer for example or other time source), keeping in mind that Time base + duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and + handled in milliseconds basis. + (++) Time base configuration function (HAL_InitTick ()) is called automatically + at the beginning of the program after reset by HAL_Init() or at any time + when clock is configured, by HAL_RCC_ClockConfig(). + (++) Source of time base is configured to generate interrupts at regular + time intervals. Care must be taken if HAL_Delay() is called from a + peripheral ISR process, the Tick interrupt line must have higher priority + (numerically lower) than the peripheral interrupt. Otherwise the caller + ISR process will be blocked. + (++) functions affecting time base configurations are declared as __weak + to make override possible in case of other implementations in user file. +@endverbatim + * @{ + */ + +/** + * @brief Configure the Flash prefetch and the Instruction cache, + * the time base source, NVIC and any required global low level hardware + * by calling the HAL_MspInit() callback function to be optionally defined in user file + * stm32g0xx_hal_msp.c. + * + * @note HAL_Init() function is called at the beginning of program after reset and before + * the clock configuration. + * + * @note In the default implementation the System Timer (Systick) is used as source of time base. + * The Systick configuration is based on HSI clock, as HSI is the clock + * used after a system Reset. + * Once done, time base tick starts incrementing: the tick variable counter is incremented + * each 1ms in the SysTick_Handler() interrupt handler. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_Init(void) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Configure Flash prefetch, Instruction cache */ + /* Default configuration at reset is: */ + /* - Prefetch disabled */ + /* - Instruction cache enabled */ + +#if (INSTRUCTION_CACHE_ENABLE == 0U) + __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); +#endif /* INSTRUCTION_CACHE_ENABLE */ + +#if (PREFETCH_ENABLE != 0U) + __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); +#endif /* PREFETCH_ENABLE */ + + /* Use SysTick as time base source and configure 1ms tick (default clock after Reset is HSI) */ + if (HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK) + { + status = HAL_ERROR; + } + else + { + /* Init the low level hardware */ + HAL_MspInit(); + } + + /* Return function status */ + return status; +} + +/** + * @brief This function de-Initializes common part of the HAL and stops the source of time base. + * @note This function is optional. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DeInit(void) +{ + /* Reset of all peripherals */ + __HAL_RCC_APB1_FORCE_RESET(); + __HAL_RCC_APB1_RELEASE_RESET(); + + __HAL_RCC_APB2_FORCE_RESET(); + __HAL_RCC_APB2_RELEASE_RESET(); + + __HAL_RCC_AHB_FORCE_RESET(); + __HAL_RCC_AHB_RELEASE_RESET(); + + __HAL_RCC_IOP_FORCE_RESET(); + __HAL_RCC_IOP_RELEASE_RESET(); + + /* De-Init the low level hardware */ + HAL_MspDeInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initialize the MSP. + * @retval None + */ +__weak void HAL_MspInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the MSP. + * @retval None + */ +__weak void HAL_MspDeInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief This function configures the source of the time base: + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). + * @note In the default implementation, SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals. + * Care must be taken if HAL_Delay() is called from a peripheral ISR process, + * The SysTick interrupt must have higher priority (numerically lower) + * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. + * The function is declared as __weak to be overwritten in case of other + * implementation in user file. + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check uwTickFreq for MisraC 2012 (even if uwTickFreq is a enum type that doesn't take the value zero)*/ + if ((uint32_t)uwTickFreq != 0U) + { + /*Configure the SysTick to have interrupt in 1ms time basis*/ + if (HAL_SYSTICK_Config(SystemCoreClock / (1000U /(uint32_t)uwTickFreq)) == 0U) + { + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); + uwTickPrio = TickPriority; + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group2 + * @brief HAL Control functions + * +@verbatim + =============================================================================== + ##### HAL Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Provide a tick value in millisecond + (+) Provide a blocking delay in millisecond + (+) Suspend the time base source interrupt + (+) Resume the time base source interrupt + (+) Get the HAL API driver version + (+) Get the device identifier + (+) Get the device revision identifier + +@endverbatim + * @{ + */ + +/** + * @brief This function is called to increment a global variable "uwTick" + * used as application time base. + * @note In the default implementation, this variable is incremented each 1ms + * in SysTick ISR. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_IncTick(void) +{ + uwTick += (uint32_t)uwTickFreq; +} + +/** + * @brief Provides a tick value in millisecond. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval tick value + */ +__weak uint32_t HAL_GetTick(void) +{ + return uwTick; +} + +/** + * @brief This function returns a tick priority. + * @retval tick priority + */ +uint32_t HAL_GetTickPrio(void) +{ + return uwTickPrio; +} + +/** + * @brief Set new tick Freq. + * @retval status + */ +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_TickFreqTypeDef prevTickFreq; + assert_param(IS_TICKFREQ(Freq)); + + if (uwTickFreq != Freq) + { + /* Back up uwTickFreq frequency */ + prevTickFreq = uwTickFreq; + + /* Update uwTickFreq global variable used by HAL_InitTick() */ + uwTickFreq = Freq; + + /* Apply the new tick Freq */ + status = HAL_InitTick(uwTickPrio); + if (status != HAL_OK) + { + /* Restore previous tick frequency */ + uwTickFreq = prevTickFreq; + } + } + + return status; +} + +/** + * @brief return tick frequency. + * @retval Tick frequency. + * Value of @ref HAL_TickFreqTypeDef. + */ +HAL_TickFreqTypeDef HAL_GetTickFreq(void) +{ + return uwTickFreq; +} + +/** + * @brief This function provides minimum delay (in milliseconds) based + * on variable incremented. + * @note In the default implementation , SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals where uwTick + * is incremented. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +__weak void HAL_Delay(uint32_t Delay) +{ + uint32_t tickstart = HAL_GetTick(); + uint32_t wait = Delay; + + /* Add a freq to guarantee minimum wait */ + if (wait < HAL_MAX_DELAY) + { + wait += (uint32_t)(uwTickFreq); + } + + while ((HAL_GetTick() - tickstart) < wait) + { + } +} + +/** + * @brief Suspend Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() + * is called, the SysTick interrupt will be disabled and so Tick increment + * is suspended. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_SuspendTick(void) +{ + /* Disable SysTick Interrupt */ + CLEAR_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Resume Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() + * is called, the SysTick interrupt will be enabled and so Tick increment + * is resumed. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_ResumeTick(void) +{ + /* Enable SysTick Interrupt */ + SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Returns the HAL revision + * @retval version : 0xXYZR (8bits for each decimal, R for RC) + */ +uint32_t HAL_GetHalVersion(void) +{ + return __STM32G0xx_HAL_VERSION; +} + +/** + * @brief Returns the device revision identifier. + * @retval Device revision identifier + */ +uint32_t HAL_GetREVID(void) +{ + return ((DBG->IDCODE & DBG_IDCODE_REV_ID) >> 16U); +} + +/** + * @brief Returns the device identifier. + * @retval Device identifier + */ +uint32_t HAL_GetDEVID(void) +{ + return ((DBG->IDCODE) & DBG_IDCODE_DEV_ID); +} + +/** + * @brief Returns first word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw0(void) +{ + return (READ_REG(*((uint32_t *)UID_BASE))); +} + +/** + * @brief Returns second word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw1(void) +{ + return (READ_REG(*((uint32_t *)(UID_BASE + 4U)))); +} + +/** + * @brief Returns third word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw2(void) +{ + return (READ_REG(*((uint32_t *)(UID_BASE + 8U)))); +} + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group3 + * @brief HAL Debug functions + * +@verbatim + =============================================================================== + ##### HAL Debug functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Enable/Disable Debug module during STOP mode + (+) Enable/Disable Debug module during STANDBY mode + +@endverbatim + * @{ + */ + +/** + * @brief Enable the Debug Module during STOP mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBG->CR, DBG_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBG->CR, DBG_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during STANDBY mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBG->CR, DBG_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBG->CR, DBG_CR_DBG_STANDBY); +} + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group4 + * @brief SYSCFG configuration functions + * +@verbatim + =============================================================================== + ##### HAL SYSCFG configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Enable/Disable Pin remap + (+) Configure the Voltage reference buffer + (+) Enable/Disable the Voltage reference buffer + (+) Enable/Disable the I/O analog switch voltage booster + (+) Enable/Disable dead battery behavior(*) + (+) Configure Clamping Diode on specific pins(*) + (*) Feature not available on all devices + +@endverbatim + * @{ + */ +#if defined(VREFBUF) +/** + * @brief Configure the internal voltage reference buffer voltage scale. + * @param VoltageScaling specifies the output voltage to achieve + * This parameter can be one of the following values: + * @arg @ref SYSCFG_VREFBUF_VoltageScale + * @retval None + */ +void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(VoltageScaling)); + + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_VRS, VoltageScaling); +} + +/** + * @brief Configure the internal voltage reference buffer high impedance mode. + * @param Mode specifies the high impedance mode + * This parameter can be one of the following values: + * @arg @ref SYSCFG_VREFBUF_HighImpedance + * @retval None + */ +void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(Mode)); + + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_HIZ, Mode); +} + +/** + * @brief Tune the Internal Voltage Reference buffer (VREFBUF). + * @note VrefBuf voltage scale is calibrated in production for each device, + * using voltage scale 1. This calibration value is loaded + * as default trimming value at device power up. + * This trimming value can be fine tuned for voltage scales 0 and 1 + * using this function. + * @retval None + */ +void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_TRIMMING(TrimmingValue)); + + MODIFY_REG(VREFBUF->CCR, VREFBUF_CCR_TRIM, TrimmingValue); +} + +/** + * @brief Enable the Internal Voltage Reference buffer (VREFBUF). + * @retval HAL_OK/HAL_TIMEOUT + */ +HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void) +{ + uint32_t tickstart; + + SET_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait for VRR bit */ + while (READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRR) == 0x00U) + { + if ((HAL_GetTick() - tickstart) > VREFBUF_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Disable the Internal Voltage Reference buffer (VREFBUF). + * + * @retval None + */ +void HAL_SYSCFG_DisableVREFBUF(void) +{ + CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); +} +#endif /* VREFBUF */ + +/** + * @brief Enable the I/O analog switch voltage booster + * @retval None + */ +void HAL_SYSCFG_EnableIOAnalogSwitchBooster(void) +{ + SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN); +} + +/** + * @brief Disable the I/O analog switch voltage booster + * @retval None + */ +void HAL_SYSCFG_DisableIOAnalogSwitchBooster(void) +{ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN); +} + +/** + * @brief Enable the remap on PA11_PA12 + * @param PinRemap specifies which pins have to be remapped + * This parameter can be any combination of the following values: + * @arg @ref SYSCFG_REMAP_PA11 + * @arg @ref SYSCFG_REMAP_PA12 + * @retval None + */ +void HAL_SYSCFG_EnableRemap(uint32_t PinRemap) +{ + /* Check the parameter */ + assert_param(IS_HAL_REMAP_PIN(PinRemap)); + SET_BIT(SYSCFG->CFGR1, PinRemap); +} + +/** + * @brief Disable the remap on PA11_PA12 + * @param PinRemap specifies which pins will behave normally + * This parameter can be any combination of the following values: + * @arg @ref SYSCFG_REMAP_PA11 + * @arg @ref SYSCFG_REMAP_PA12 + * @retval None + */ +void HAL_SYSCFG_DisableRemap(uint32_t PinRemap) +{ + /* Check the parameter */ + assert_param(IS_HAL_REMAP_PIN(PinRemap)); + CLEAR_BIT(SYSCFG->CFGR1, PinRemap); +} + +#if defined(SYSCFG_CDEN_SUPPORT) +/** + * @brief Enable Clamping Diode on specified IO + * @param PinConfig specifies on which pins clamping Diode has to be enabled + * This parameter can be any combination of the following values: + * @arg @ref SYSCFG_ClampingDiode + * @retval None + */ +void HAL_SYSCFG_EnableClampingDiode(uint32_t PinConfig) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_CLAMPINGDIODE(PinConfig)); + SET_BIT(SYSCFG->CFGR2, PinConfig); +} + +/** + * @brief Disable Clamping Diode on specified IO + * @param PinConfig specifies on which pins clamping Diode has to be disabled + * This parameter can be any combination of the following values: + * @arg @ref SYSCFG_ClampingDiode + * @retval None + */ +void HAL_SYSCFG_DisableClampingDiode(uint32_t PinConfig) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_CLAMPINGDIODE(PinConfig)); + CLEAR_BIT(SYSCFG->CFGR2, PinConfig); +} +#endif /* SYSCFG_CDEN_SUPPORT */ + +#if defined (SYSCFG_CFGR1_UCPD1_STROBE) || defined (SYSCFG_CFGR1_UCPD2_STROBE) +/** + * @brief Strobe configuration of GPIO depending on UCPDx dead battery settings + * @param ConfigDeadBattery specifies on which pins to make effective or not Dead Battery sw configuration + * This parameter can be any combination of the following values: + * @arg @ref SYSCFG_UCPD1_STROBE + * @arg @ref SYSCFG_UCPD2_STROBE + * @retval None + */ +void HAL_SYSCFG_StrobeDBattpinsConfig(uint32_t ConfigDeadBattery) +{ + assert_param(IS_SYSCFG_DBATT_CONFIG(ConfigDeadBattery)); + + /* Change strobe configuration of GPIO depending on UCPDx dead battery settings */ + MODIFY_REG(SYSCFG->CFGR1, (SYSCFG_CFGR1_UCPD1_STROBE | SYSCFG_CFGR1_UCPD2_STROBE), ConfigDeadBattery); +} +#endif /* SYSCFG_CFGR1_UCPD1_STROBE || SYSCFG_CFGR1_UCPD2_STROBE */ +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + + diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc.c new file mode 100644 index 0000000..3300b4d --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc.c @@ -0,0 +1,2987 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_adc.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the following + * functionalities of the Analog to Digital Converter (ADC) + * peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + Peripheral State functions + * Other functions (extended functions) are available in file + * "stm32g0xx_hal_adc_ex.c". + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### ADC peripheral features ##### + ============================================================================== + [..] + (+) 12-bit, 10-bit, 8-bit or 6-bit configurable resolution. + + (+) Interrupt generation at the end of regular conversion and in case of + analog watchdog or overrun events. + + (+) Single and continuous conversion modes. + + (+) Scan mode for conversion of several channels sequentially. + + (+) Data alignment with in-built data coherency. + + (+) Programmable sampling time (common to group of channels) + + (+) External trigger (timer or EXTI) with configurable polarity + + (+) DMA request generation for transfer of conversions data of regular group. + + (+) ADC calibration + + (+) ADC conversion of regular group. + + (+) ADC supply requirements: 1.62 V to 3.6 V. + + (+) ADC input range: from Vref- (connected to Vssa) to Vref+ (connected to + Vdda or to an external voltage reference). + + + ##### How to use this driver ##### + ============================================================================== + [..] + + *** Configuration of top level parameters related to ADC *** + ============================================================ + [..] + + (#) Enable the ADC interface + (++) As prerequisite, ADC clock must be configured at RCC top level. + Caution: On STM32G0, ADC clock frequency max is 35MHz (refer + to device datasheet). + Therefore, ADC clock source from RCC and ADC clock + prescaler must be configured to remain below + this maximum frequency. + + (++) Two clock settings are mandatory: + (+++) ADC clock (core clock, also possibly conversion clock). + + (+++) ADC clock (conversions clock). + Four possible clock sources: synchronous clock from APB clock (same as ADC core clock) + or asynchronous clock from RCC level: SYSCLK, HSI16, PLLPCLK. + + (+++) Example: + Into HAL_ADC_MspInit() (recommended code location) or with + other device clock parameters configuration: + (+++) __HAL_RCC_ADC_CLK_ENABLE(); (mandatory: core clock) + + (++) ADC clock source and clock prescaler are configured at ADC level with + parameter "ClockPrescaler" using function HAL_ADC_Init(). + + (#) ADC pins configuration + (++) Enable the clock for the ADC GPIOs + using macro __HAL_RCC_GPIOx_CLK_ENABLE() + (++) Configure these ADC pins in analog mode + using function HAL_GPIO_Init() + + (#) Optionally, in case of usage of ADC with interruptions: + (++) Configure the NVIC for ADC + using function HAL_NVIC_EnableIRQ(ADCx_IRQn) + (++) Insert the ADC interruption handler function HAL_ADC_IRQHandler() + into the function of corresponding ADC interruption vector + ADCx_IRQHandler(). + + (#) Optionally, in case of usage of DMA: + (++) Configure the DMA (DMA channel, mode normal or circular, ...) + using function HAL_DMA_Init(). + (++) Configure the NVIC for DMA + using function HAL_NVIC_EnableIRQ(DMAx_Channelx_IRQn) + (++) Insert the ADC interruption handler function HAL_ADC_IRQHandler() + into the function of corresponding DMA interruption vector + DMAx_Channelx_IRQHandler(). + + *** Configuration of ADC, group regular, channels parameters *** + ================================================================ + [..] + + (#) Configure the ADC parameters (resolution, data alignment, ...) + and regular group parameters (conversion trigger, sequencer, ...) + using function HAL_ADC_Init(). + + (#) Configure the channels for regular group parameters (channel number, + channel rank into sequencer, ..., into regular group) + using function HAL_ADC_ConfigChannel(). + + (#) Optionally, configure the analog watchdog parameters (channels + monitored, thresholds, ...) + using function HAL_ADC_AnalogWDGConfig(). + + *** Execution of ADC conversions *** + ==================================== + [..] + + (#) Optionally, perform an automatic ADC calibration to improve the + conversion accuracy + using function HAL_ADCEx_Calibration_Start(). + + (#) ADC driver can be used among three modes: polling, interruption, + transfer by DMA. + + (++) ADC conversion by polling: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start() + (+++) Wait for ADC conversion completion + using function HAL_ADC_PollForConversion() + (+++) Retrieve conversion results + using function HAL_ADC_GetValue() + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop() + + (++) ADC conversion by interruption: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start_IT() + (+++) Wait for ADC conversion completion by call of function + HAL_ADC_ConvCpltCallback() + (this function must be implemented in user program) + (+++) Retrieve conversion results + using function HAL_ADC_GetValue() + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop_IT() + + (++) ADC conversion with transfer by DMA: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start_DMA() + (+++) Wait for ADC conversion completion by call of function + HAL_ADC_ConvCpltCallback() or HAL_ADC_ConvHalfCpltCallback() + (these functions must be implemented in user program) + (+++) Conversion results are automatically transferred by DMA into + destination variable address. + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop_DMA() + + [..] + + (@) Callback functions must be implemented in user program: + (+@) HAL_ADC_ErrorCallback() + (+@) HAL_ADC_LevelOutOfWindowCallback() (callback of analog watchdog) + (+@) HAL_ADC_ConvCpltCallback() + (+@) HAL_ADC_ConvHalfCpltCallback + + *** Deinitialization of ADC *** + ============================================================ + [..] + + (#) Disable the ADC interface + (++) ADC clock can be hard reset and disabled at RCC top level. + (++) Hard reset of ADC peripherals + using macro __ADCx_FORCE_RESET(), __ADCx_RELEASE_RESET(). + (++) ADC clock disable + using the equivalent macro/functions as configuration step. + (+++) Example: + Into HAL_ADC_MspDeInit() (recommended code location) or with + other device clock parameters configuration: + (+++) RCC_OscInitStructure.OscillatorType = RCC_OSCILLATORTYPE_HSI14; + (+++) RCC_OscInitStructure.HSI14State = RCC_HSI14_OFF; (if not used for system clock) + (+++) HAL_RCC_OscConfig(&RCC_OscInitStructure); + + (#) ADC pins configuration + (++) Disable the clock for the ADC GPIOs + using macro __HAL_RCC_GPIOx_CLK_DISABLE() + + (#) Optionally, in case of usage of ADC with interruptions: + (++) Disable the NVIC for ADC + using function HAL_NVIC_EnableIRQ(ADCx_IRQn) + + (#) Optionally, in case of usage of DMA: + (++) Deinitialize the DMA + using function HAL_DMA_Init(). + (++) Disable the NVIC for DMA + using function HAL_NVIC_EnableIRQ(DMAx_Channelx_IRQn) + + [..] + + *** Callback registration *** + ============================================= + [..] + + The compilation flag USE_HAL_ADC_REGISTER_CALLBACKS, when set to 1, + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_ADC_RegisterCallback() + to register an interrupt callback. + [..] + + Function HAL_ADC_RegisterCallback() allows to register following callbacks: + (+) ConvCpltCallback : ADC conversion complete callback + (+) ConvHalfCpltCallback : ADC conversion DMA half-transfer callback + (+) LevelOutOfWindowCallback : ADC analog watchdog 1 callback + (+) ErrorCallback : ADC error callback + (+) LevelOutOfWindow2Callback : ADC analog watchdog 2 callback + (+) LevelOutOfWindow3Callback : ADC analog watchdog 3 callback + (+) EndOfSamplingCallback : ADC end of sampling callback + (+) MspInitCallback : ADC Msp Init callback + (+) MspDeInitCallback : ADC Msp DeInit callback + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + + Use function HAL_ADC_UnRegisterCallback to reset a callback to the default + weak function. + [..] + + HAL_ADC_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) ConvCpltCallback : ADC conversion complete callback + (+) ConvHalfCpltCallback : ADC conversion DMA half-transfer callback + (+) LevelOutOfWindowCallback : ADC analog watchdog 1 callback + (+) ErrorCallback : ADC error callback + (+) LevelOutOfWindow2Callback : ADC analog watchdog 2 callback + (+) LevelOutOfWindow3Callback : ADC analog watchdog 3 callback + (+) EndOfSamplingCallback : ADC end of sampling callback + (+) MspInitCallback : ADC Msp Init callback + (+) MspDeInitCallback : ADC Msp DeInit callback + [..] + + By default, after the HAL_ADC_Init() and when the state is HAL_ADC_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_ADC_ConvCpltCallback(), HAL_ADC_ErrorCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_ADC_Init()/ HAL_ADC_DeInit() only when + these callbacks are null (not registered beforehand). + [..] + + If MspInit or MspDeInit are not null, the HAL_ADC_Init()/ HAL_ADC_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + + Callbacks can be registered/unregistered in HAL_ADC_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_ADC_STATE_READY or HAL_ADC_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + [..] + + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_ADC_RegisterCallback() before calling HAL_ADC_DeInit() + or HAL_ADC_Init() function. + [..] + + When the compilation flag USE_HAL_ADC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup ADC ADC + * @brief ADC HAL module driver + * @{ + */ + +#ifdef HAL_ADC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup ADC_Private_Constants ADC Private Constants + * @{ + */ + +/* Fixed timeout values for ADC calibration, enable settling time, disable */ +/* settling time. */ +/* Values defined to be higher than worst cases: low clock frequency, */ +/* maximum prescaler. */ +/* Ex of profile low frequency : Clock source at 0.1 MHz, ADC clock */ +/* prescaler 4, sampling time 7.5 ADC clock cycles, resolution 12 bits. */ +/* Unit: ms */ +#define ADC_ENABLE_TIMEOUT (2UL) +#define ADC_DISABLE_TIMEOUT (2UL) +#define ADC_STOP_CONVERSION_TIMEOUT (2UL) +#define ADC_CHANNEL_CONF_RDY_TIMEOUT (1UL) + +/* Register CHSELR bits corresponding to ranks 2 to 8 . */ +#define ADC_CHSELR_SQ2_TO_SQ8 (ADC_CHSELR_SQ2 | ADC_CHSELR_SQ3 | ADC_CHSELR_SQ4 | \ + ADC_CHSELR_SQ5 | ADC_CHSELR_SQ6 | ADC_CHSELR_SQ7 | ADC_CHSELR_SQ8) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup ADC_Private_Functions ADC Private Functions + * @{ + */ +static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma); +static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma); +static void ADC_DMAError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Functions ADC Exported Functions + * @{ + */ + +/** @defgroup ADC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief ADC Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the ADC. + (+) De-initialize the ADC. +@endverbatim + * @{ + */ + +/** + * @brief Initialize the ADC peripheral and regular group according to + * parameters specified in structure "ADC_InitTypeDef". + * @note As prerequisite, ADC clock must be configured at RCC top level + * (refer to description of RCC configuration for ADC + * in header of this file). + * @note Possibility to update parameters on the fly: + * This function initializes the ADC MSP (HAL_ADC_MspInit()) only when + * coming from ADC state reset. Following calls to this function can + * be used to reconfigure some parameters of ADC_InitTypeDef + * structure on the fly, without modifying MSP configuration. If ADC + * MSP has to be modified again, HAL_ADC_DeInit() must be called + * before HAL_ADC_Init(). + * The setting of these parameters is conditioned to ADC state. + * For parameters constraints, see comments of structure + * "ADC_InitTypeDef". + * @note This function configures the ADC within 2 scopes: scope of entire + * ADC and scope of regular group. For parameters details, see comments + * of structure "ADC_InitTypeDef". + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmp_cfgr1 = 0UL; + uint32_t tmp_cfgr2 = 0UL; + uint32_t tmp_adc_reg_is_conversion_on_going; + __IO uint32_t wait_loop_index = 0UL; + + /* Check ADC handle */ + if (hadc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_CLOCKPRESCALER(hadc->Init.ClockPrescaler)); + assert_param(IS_ADC_RESOLUTION(hadc->Init.Resolution)); + assert_param(IS_ADC_DATA_ALIGN(hadc->Init.DataAlign)); + assert_param(IS_ADC_SCAN_MODE(hadc->Init.ScanConvMode)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode)); + assert_param(IS_ADC_EXTTRIG_EDGE(hadc->Init.ExternalTrigConvEdge)); + assert_param(IS_ADC_EXTTRIG(hadc->Init.ExternalTrigConv)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DMAContinuousRequests)); + assert_param(IS_ADC_EOC_SELECTION(hadc->Init.EOCSelection)); + assert_param(IS_ADC_OVERRUN(hadc->Init.Overrun)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.LowPowerAutoWait)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.LowPowerAutoPowerOff)); + assert_param(IS_ADC_SAMPLE_TIME(hadc->Init.SamplingTimeCommon1)); + assert_param(IS_ADC_SAMPLE_TIME(hadc->Init.SamplingTimeCommon2)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.OversamplingMode)); + if (hadc->Init.OversamplingMode == ENABLE) + { + assert_param(IS_ADC_OVERSAMPLING_RATIO(hadc->Init.Oversampling.Ratio)); + assert_param(IS_ADC_RIGHT_BIT_SHIFT(hadc->Init.Oversampling.RightBitShift)); + assert_param(IS_ADC_TRIGGERED_OVERSAMPLING_MODE(hadc->Init.Oversampling.TriggeredMode)); + } + assert_param(IS_ADC_TRIGGER_FREQ(hadc->Init.TriggerFrequencyMode)); + + if (hadc->Init.ScanConvMode != ADC_SCAN_DISABLE) + { + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DiscontinuousConvMode)); + + if (hadc->Init.ScanConvMode == ADC_SCAN_ENABLE) + { + assert_param(IS_ADC_REGULAR_NB_CONV(hadc->Init.NbrOfConversion)); + } + } + + /* ADC group regular discontinuous mode can be enabled only if */ + /* continuous mode is disabled. */ + assert_param(!((hadc->Init.DiscontinuousConvMode == ENABLE) && (hadc->Init.ContinuousConvMode == ENABLE))); + + /* Actions performed only if ADC is coming from state reset: */ + /* - Initialization of ADC MSP */ + if (hadc->State == HAL_ADC_STATE_RESET) + { +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + /* Init the ADC Callback settings */ + hadc->ConvCpltCallback = HAL_ADC_ConvCpltCallback; /* Legacy weak callback */ + hadc->ConvHalfCpltCallback = HAL_ADC_ConvHalfCpltCallback; /* Legacy weak callback */ + hadc->LevelOutOfWindowCallback = HAL_ADC_LevelOutOfWindowCallback; /* Legacy weak callback */ + hadc->ErrorCallback = HAL_ADC_ErrorCallback; /* Legacy weak callback */ + hadc->LevelOutOfWindow2Callback = HAL_ADCEx_LevelOutOfWindow2Callback; /* Legacy weak callback */ + hadc->LevelOutOfWindow3Callback = HAL_ADCEx_LevelOutOfWindow3Callback; /* Legacy weak callback */ + hadc->EndOfSamplingCallback = HAL_ADCEx_EndOfSamplingCallback; /* Legacy weak callback */ + + if (hadc->MspInitCallback == NULL) + { + hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware */ + hadc->MspInitCallback(hadc); +#else + /* Init the low level hardware */ + HAL_ADC_MspInit(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Initialize Lock */ + hadc->Lock = HAL_UNLOCKED; + } + + if (LL_ADC_IsInternalRegulatorEnabled(hadc->Instance) == 0UL) + { + /* Enable ADC internal voltage regulator */ + LL_ADC_EnableInternalRegulator(hadc->Instance); + + /* Delay for ADC stabilization time */ + /* Wait loop initialization and execution */ + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = ((LL_ADC_DELAY_INTERNAL_REGUL_STAB_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL)); + while (wait_loop_index != 0UL) + { + wait_loop_index--; + } + } + + /* Verification that ADC voltage regulator is correctly enabled, whether */ + /* or not ADC is coming from state reset (if any potential problem of */ + /* clocking, voltage regulator would not be enabled). */ + if (LL_ADC_IsInternalRegulatorEnabled(hadc->Instance) == 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + tmp_hal_status = HAL_ERROR; + } + + /* Configuration of ADC parameters if previous preliminary actions are */ + /* correctly completed and if there is no conversion on going on regular */ + /* group (ADC may already be enabled at this point if HAL_ADC_Init() is */ + /* called to update a parameter on the fly). */ + tmp_adc_reg_is_conversion_on_going = LL_ADC_REG_IsConversionOngoing(hadc->Instance); + + if (((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) + && (tmp_adc_reg_is_conversion_on_going == 0UL) + ) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_BUSY_INTERNAL); + + /* Configuration of common ADC parameters */ + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated only when ADC is disabled: */ + /* - Internal voltage regulator (no parameter in HAL ADC init structure) */ + /* - Clock configuration */ + /* - ADC resolution */ + /* - Oversampling */ + /* - discontinuous mode */ + /* - LowPowerAutoWait mode */ + /* - LowPowerAutoPowerOff mode */ + /* - continuous conversion mode */ + /* - overrun */ + /* - external trigger to start conversion */ + /* - external trigger polarity */ + /* - data alignment */ + /* - resolution */ + /* - scan direction */ + /* - DMA continuous request */ + /* - Trigger frequency mode */ + /* Note: If low power mode AutoPowerOff is enabled, ADC enable */ + /* and disable phases are performed automatically by hardware */ + /* (in this case, flag ADC_FLAG_RDY is not set). */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + /* Some parameters of this register are not reset, since they are set */ + /* by other functions and must be kept in case of usage of this */ + /* function on the fly (update of a parameter of ADC_InitTypeDef */ + /* without needing to reconfigure all other ADC groups/channels */ + /* parameters): */ + /* - internal measurement paths (VrefInt, ...) */ + /* (set into HAL_ADC_ConfigChannel() ) */ + + tmp_cfgr1 |= (hadc->Init.Resolution | + ADC_CFGR1_AUTOWAIT((uint32_t)hadc->Init.LowPowerAutoWait) | + ADC_CFGR1_AUTOOFF((uint32_t)hadc->Init.LowPowerAutoPowerOff) | + ADC_CFGR1_CONTINUOUS((uint32_t)hadc->Init.ContinuousConvMode) | + ADC_CFGR1_OVERRUN(hadc->Init.Overrun) | + hadc->Init.DataAlign | + ADC_SCAN_SEQ_MODE(hadc->Init.ScanConvMode) | + ADC_CFGR1_DMACONTREQ((uint32_t)hadc->Init.DMAContinuousRequests)); + + /* Update setting of discontinuous mode only if continuous mode is disabled */ + if (hadc->Init.DiscontinuousConvMode == ENABLE) + { + if (hadc->Init.ContinuousConvMode == DISABLE) + { + /* Enable the selected ADC group regular discontinuous mode */ + tmp_cfgr1 |= ADC_CFGR1_DISCEN; + } + else + { + /* ADC regular group discontinuous was intended to be enabled, */ + /* but ADC regular group modes continuous and sequencer discontinuous */ + /* cannot be enabled simultaneously. */ + + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + + /* Enable external trigger if trigger selection is different of software */ + /* start. */ + /* Note: This configuration keeps the hardware feature of parameter */ + /* ExternalTrigConvEdge "trigger edge none" equivalent to */ + /* software start. */ + if (hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START) + { + tmp_cfgr1 |= ((hadc->Init.ExternalTrigConv & ADC_CFGR1_EXTSEL) | + hadc->Init.ExternalTrigConvEdge); + } + + /* Update ADC configuration register with previous settings */ + MODIFY_REG(hadc->Instance->CFGR1, + ADC_CFGR1_RES | + ADC_CFGR1_DISCEN | + ADC_CFGR1_CHSELRMOD | + ADC_CFGR1_AUTOFF | + ADC_CFGR1_WAIT | + ADC_CFGR1_CONT | + ADC_CFGR1_OVRMOD | + ADC_CFGR1_EXTSEL | + ADC_CFGR1_EXTEN | + ADC_CFGR1_ALIGN | + ADC_CFGR1_SCANDIR | + ADC_CFGR1_DMACFG, + tmp_cfgr1); + + tmp_cfgr2 |= ((hadc->Init.ClockPrescaler & ADC_CFGR2_CKMODE) | + hadc->Init.TriggerFrequencyMode + ); + + if (hadc->Init.OversamplingMode == ENABLE) + { + tmp_cfgr2 |= (ADC_CFGR2_OVSE | + (hadc->Init.ClockPrescaler & ADC_CFGR2_CKMODE) | + hadc->Init.Oversampling.Ratio | + hadc->Init.Oversampling.RightBitShift | + hadc->Init.Oversampling.TriggeredMode + ); + } + + MODIFY_REG(hadc->Instance->CFGR2, + ADC_CFGR2_CKMODE | + ADC_CFGR2_LFTRIG | + ADC_CFGR2_OVSE | + ADC_CFGR2_OVSR | + ADC_CFGR2_OVSS | + ADC_CFGR2_TOVS, + tmp_cfgr2); + + /* Configuration of ADC clock mode: asynchronous clock source */ + /* with selectable prescaler. */ + if (((hadc->Init.ClockPrescaler) != ADC_CLOCK_SYNC_PCLK_DIV1) && + ((hadc->Init.ClockPrescaler) != ADC_CLOCK_SYNC_PCLK_DIV2) && + ((hadc->Init.ClockPrescaler) != ADC_CLOCK_SYNC_PCLK_DIV4)) + { + MODIFY_REG(ADC1_COMMON->CCR, + ADC_CCR_PRESC, + hadc->Init.ClockPrescaler & ADC_CCR_PRESC); + } + } + + /* Channel sampling time configuration */ + LL_ADC_SetSamplingTimeCommonChannels(hadc->Instance, LL_ADC_SAMPLINGTIME_COMMON_1, hadc->Init.SamplingTimeCommon1); + LL_ADC_SetSamplingTimeCommonChannels(hadc->Instance, LL_ADC_SAMPLINGTIME_COMMON_2, hadc->Init.SamplingTimeCommon2); + + /* Configuration of regular group sequencer: */ + /* - if scan mode is disabled, regular channels sequence length is set to */ + /* 0x00: 1 channel converted (channel on regular rank 1) */ + /* Parameter "NbrOfConversion" is discarded. */ + /* Note: Scan mode is not present by hardware on this device, but */ + /* emulated by software for alignment over all STM32 devices. */ + /* - if scan mode is enabled, regular channels sequence length is set to */ + /* parameter "NbrOfConversion". */ + /* Channels must be configured into each rank using function */ + /* "HAL_ADC_ConfigChannel()". */ + if (hadc->Init.ScanConvMode == ADC_SCAN_DISABLE) + { + /* Set sequencer scan length by clearing ranks above rank 1 */ + /* and do not modify rank 1 value. */ + SET_BIT(hadc->Instance->CHSELR, + ADC_CHSELR_SQ2_TO_SQ8); + } + else if (hadc->Init.ScanConvMode == ADC_SCAN_ENABLE) + { + /* Set ADC group regular sequencer: */ + /* - Set ADC group regular sequencer to value memorized */ + /* in HAL ADC handle */ + /* Note: This value maybe be initialized at a unknown value, */ + /* therefore after the first call of "HAL_ADC_Init()", */ + /* each rank corresponding to parameter "NbrOfConversion" */ + /* must be set using "HAL_ADC_ConfigChannel()". */ + /* - Set sequencer scan length by clearing ranks above maximum rank */ + /* and do not modify other ranks value. */ + MODIFY_REG(hadc->Instance->CHSELR, + ADC_CHSELR_SQ_ALL, + (ADC_CHSELR_SQ2_TO_SQ8 << (((hadc->Init.NbrOfConversion - 1UL) * ADC_REGULAR_RANK_2) & 0x1FUL)) + | (hadc->ADCGroupRegularSequencerRanks) + ); + } + else + { + /* Nothing to do */ + } + + /* Check back that ADC registers have effectively been configured to */ + /* ensure of no potential problem of ADC core peripheral clocking. */ + if (LL_ADC_GetSamplingTimeCommonChannels(hadc->Instance, LL_ADC_SAMPLINGTIME_COMMON_1) + == hadc->Init.SamplingTimeCommon1) + { + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Set the ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_READY); + } + else + { + /* Update ADC state machine to error */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + tmp_hal_status = HAL_ERROR; + } + + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + tmp_hal_status = HAL_ERROR; + } + + return tmp_hal_status; +} + +/** + * @brief Deinitialize the ADC peripheral registers to their default reset + * values, with deinitialization of the ADC MSP. + * @note For devices with several ADCs: reset of ADC common registers is done + * only if all ADCs sharing the same common group are disabled. + * (function "HAL_ADC_MspDeInit()" is also called under the same conditions: + * all ADC instances use the same core clock at RCC level, disabling + * the core clock reset all ADC instances). + * If this is not the case, reset of these common parameters reset is + * bypassed without error reporting: it can be the intended behavior in + * case of reset of a single ADC while the other ADCs sharing the same + * common group is still running. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check ADC handle */ + if (hadc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_BUSY_INTERNAL); + + /* Stop potential conversion on going, on regular group */ + tmp_hal_status = ADC_ConversionStop(hadc); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* Disable the ADC peripheral */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Change ADC state */ + hadc->State = HAL_ADC_STATE_READY; + } + + /* Disable ADC internal voltage regulator */ + LL_ADC_DisableInternalRegulator(hadc->Instance); + } + + /* Note: HAL ADC deInit is done independently of ADC conversion stop */ + /* and disable return status. In case of status fail, attempt to */ + /* perform deinitialization anyway and it is up user code in */ + /* in HAL_ADC_MspDeInit() to reset the ADC peripheral using */ + /* system RCC hard reset. */ + + /* ========== Reset ADC registers ========== */ + /* Reset register IER */ + __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_AWD3 | ADC_IT_AWD2 | + ADC_IT_AWD1 | ADC_IT_OVR | + ADC_IT_EOS | ADC_IT_EOC | + ADC_IT_EOSMP | ADC_IT_RDY)); + + /* Reset register ISR */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_AWD3 | ADC_FLAG_AWD2 | + ADC_FLAG_AWD1 | ADC_FLAG_OVR | + ADC_FLAG_EOS | ADC_FLAG_EOC | + ADC_FLAG_EOSMP | ADC_FLAG_RDY)); + + /* Reset register CR */ + /* Bits ADC_CR_ADCAL, ADC_CR_ADSTP, ADC_CR_ADSTART are in access mode */ + /* "read-set": no direct reset applicable. */ + + /* Reset register CFGR1 */ + hadc->Instance->CFGR1 &= ~(ADC_CFGR1_AWD1CH | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL | ADC_CFGR1_DISCEN | + ADC_CFGR1_CHSELRMOD | ADC_CFGR1_AUTOFF | + ADC_CFGR1_WAIT | ADC_CFGR1_CONT | ADC_CFGR1_OVRMOD | + ADC_CFGR1_EXTEN | ADC_CFGR1_EXTSEL | ADC_CFGR1_ALIGN | ADC_CFGR1_RES | + ADC_CFGR1_SCANDIR | ADC_CFGR1_DMACFG | ADC_CFGR1_DMAEN); + + /* Reset register SMPR */ + hadc->Instance->SMPR &= ~ADC_SMPR_SMP1; + + /* Reset register CHSELR */ + hadc->Instance->CHSELR &= ~(ADC_CHSELR_SQ_ALL); + + /* Reset register DR */ + /* bits in access mode read only, no direct reset applicable */ + + /* Reset registers AWDxTR */ + hadc->Instance->AWD1TR &= ~(ADC_AWD1TR_HT1 | ADC_AWD1TR_LT1); + hadc->Instance->AWD2TR &= ~(ADC_AWD2TR_HT2 | ADC_AWD2TR_LT2); + hadc->Instance->AWD3TR &= ~(ADC_AWD3TR_HT3 | ADC_AWD3TR_LT3); + + /* Reset register CFGR2 */ + /* Note: CFGR2 reset done at the end of de-initialization due to */ + /* clock source reset */ + /* Note: Update of ADC clock mode is conditioned to ADC state disabled: */ + /* already done above. */ + hadc->Instance->CFGR2 &= ~ADC_CFGR2_CKMODE; + + /* Reset register CCR */ + ADC1_COMMON->CCR &= ~(ADC_CCR_VBATEN | ADC_CCR_TSEN | ADC_CCR_VREFEN | ADC_CCR_PRESC); + + /* ========== Hard reset ADC peripheral ========== */ + /* Performs a global reset of the entire ADC peripheral: ADC state is */ + /* forced to a similar state after device power-on. */ + /* Note: A possible implementation is to add RCC bus reset of ADC */ + /* (for example, using macro */ + /* __HAL_RCC_ADC..._FORCE_RESET()/..._RELEASE_RESET()/..._CLK_DISABLE()) */ + /* in function "void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc)": */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + if (hadc->MspDeInitCallback == NULL) + { + hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hadc->MspDeInitCallback(hadc); +#else + /* DeInit the low level hardware */ + HAL_ADC_MspDeInit(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Reset HAL ADC handle variable */ + hadc->ADCGroupRegularSequencerRanks = 0x00000000UL; + + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Set ADC state */ + hadc->State = HAL_ADC_STATE_RESET; + + __HAL_UNLOCK(hadc); + + return tmp_hal_status; +} + +/** + * @brief Initialize the ADC MSP. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_MspInit(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_MspInit must be implemented in the user file. + */ +} + +/** + * @brief DeInitialize the ADC MSP. + * @param hadc ADC handle + * @note All ADC instances use the same core clock at RCC level, disabling + * the core clock reset all ADC instances). + * @retval None + */ +__weak void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_MspDeInit must be implemented in the user file. + */ +} + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User ADC Callback + * To be used instead of the weak predefined callback + * @param hadc Pointer to a ADC_HandleTypeDef structure that contains + * the configuration information for the specified ADC. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_ADC_CONVERSION_COMPLETE_CB_ID ADC conversion complete callback ID + * @arg @ref HAL_ADC_CONVERSION_HALF_CB_ID ADC conversion DMA half-transfer callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID ADC analog watchdog 1 callback ID + * @arg @ref HAL_ADC_ERROR_CB_ID ADC error callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID ADC analog watchdog 2 callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID ADC analog watchdog 3 callback ID + * @arg @ref HAL_ADC_END_OF_SAMPLING_CB_ID ADC end of sampling callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID ADC Msp Init callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID ADC Msp DeInit callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, + pADC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if ((hadc->State & HAL_ADC_STATE_READY) != 0UL) + { + switch (CallbackID) + { + case HAL_ADC_CONVERSION_COMPLETE_CB_ID : + hadc->ConvCpltCallback = pCallback; + break; + + case HAL_ADC_CONVERSION_HALF_CB_ID : + hadc->ConvHalfCpltCallback = pCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID : + hadc->LevelOutOfWindowCallback = pCallback; + break; + + case HAL_ADC_ERROR_CB_ID : + hadc->ErrorCallback = pCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID : + hadc->LevelOutOfWindow2Callback = pCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID : + hadc->LevelOutOfWindow3Callback = pCallback; + break; + + case HAL_ADC_END_OF_SAMPLING_CB_ID : + hadc->EndOfSamplingCallback = pCallback; + break; + + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = pCallback; + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_ADC_STATE_RESET == hadc->State) + { + switch (CallbackID) + { + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = pCallback; + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a ADC Callback + * ADC callback is redirected to the weak predefined callback + * @param hadc Pointer to a ADC_HandleTypeDef structure that contains + * the configuration information for the specified ADC. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_ADC_CONVERSION_COMPLETE_CB_ID ADC conversion complete callback ID + * @arg @ref HAL_ADC_CONVERSION_HALF_CB_ID ADC conversion DMA half-transfer callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID ADC analog watchdog 1 callback ID + * @arg @ref HAL_ADC_ERROR_CB_ID ADC error callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID ADC analog watchdog 2 callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID ADC analog watchdog 3 callback ID + * @arg @ref HAL_ADC_END_OF_SAMPLING_CB_ID ADC end of sampling callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID ADC Msp Init callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID ADC Msp DeInit callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if ((hadc->State & HAL_ADC_STATE_READY) != 0UL) + { + switch (CallbackID) + { + case HAL_ADC_CONVERSION_COMPLETE_CB_ID : + hadc->ConvCpltCallback = HAL_ADC_ConvCpltCallback; + break; + + case HAL_ADC_CONVERSION_HALF_CB_ID : + hadc->ConvHalfCpltCallback = HAL_ADC_ConvHalfCpltCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID : + hadc->LevelOutOfWindowCallback = HAL_ADC_LevelOutOfWindowCallback; + break; + + case HAL_ADC_ERROR_CB_ID : + hadc->ErrorCallback = HAL_ADC_ErrorCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID : + hadc->LevelOutOfWindow2Callback = HAL_ADCEx_LevelOutOfWindow2Callback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID : + hadc->LevelOutOfWindow3Callback = HAL_ADCEx_LevelOutOfWindow3Callback; + break; + + case HAL_ADC_END_OF_SAMPLING_CB_ID : + hadc->EndOfSamplingCallback = HAL_ADCEx_EndOfSamplingCallback; + break; + + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_ADC_STATE_RESET == hadc->State) + { + switch (CallbackID) + { + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions_Group2 ADC Input and Output operation functions + * @brief ADC IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Start conversion of regular group. + (+) Stop conversion of regular group. + (+) Poll for conversion complete on regular group. + (+) Poll for conversion event. + (+) Get result of regular channel conversion. + (+) Start conversion of regular group and enable interruptions. + (+) Stop conversion of regular group and disable interruptions. + (+) Handle ADC interrupt request + (+) Start conversion of regular group and enable DMA transfer. + (+) Stop conversion of regular group and disable ADC DMA transfer. +@endverbatim + * @{ + */ + +/** + * @brief Enable ADC, start conversion of regular group. + * @note Interruptions enabled in this function: None. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Perform ADC enable and conversion start if no conversion is on going */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR | HAL_ADC_STATE_REG_EOSMP, + HAL_ADC_STATE_REG_BUSY); + + /* Set ADC error code */ + /* Reset all ADC error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Clear ADC group regular conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_OVR)); + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Start ADC group regular conversion */ + LL_ADC_REG_StartConversion(hadc->Instance); + } + else + { + __HAL_UNLOCK(hadc); + } + } + else + { + tmp_hal_status = HAL_BUSY; + } + + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected channels in + * case of auto_injection mode), disable ADC peripheral. + * @note: ADC peripheral disable is forcing stop of potential + * conversion on injected group. If injected group is under use, it + * should be preliminarily stopped using HAL_ADCEx_InjectedStop function. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + __HAL_LOCK(hadc); + + /* 1. Stop potential conversion on going, on ADC group regular */ + tmp_hal_status = ADC_ConversionStop(hadc); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* 2. Disable the ADC peripheral */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + } + + __HAL_UNLOCK(hadc); + + return tmp_hal_status; +} + +/** + * @brief Wait for regular group conversion to be completed. + * @note ADC conversion flags EOS (end of sequence) and EOC (end of + * conversion) are cleared by this function, with an exception: + * if low power feature "LowPowerAutoWait" is enabled, flags are + * not cleared to not interfere with this feature until data register + * is read using function HAL_ADC_GetValue(). + * @note This function cannot be used in a particular setup: ADC configured + * in DMA mode and polling for end of each conversion (ADC init + * parameter "EOCSelection" set to ADC_EOC_SINGLE_CONV). + * In this case, DMA resets the flag EOC and polling cannot be + * performed on each conversion. Nevertheless, polling can still + * be performed on the complete sequence (ADC init + * parameter "EOCSelection" set to ADC_EOC_SEQ_CONV). + * @param hadc ADC handle + * @param Timeout Timeout value in millisecond. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t tmp_flag_end; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* If end of conversion selected to end of sequence conversions */ + if (hadc->Init.EOCSelection == ADC_EOC_SEQ_CONV) + { + tmp_flag_end = ADC_FLAG_EOS; + } + /* If end of conversion selected to end of unitary conversion */ + else /* ADC_EOC_SINGLE_CONV */ + { + /* Verification that ADC configuration is compliant with polling for */ + /* each conversion: */ + /* Particular case is ADC configured in DMA mode and ADC sequencer with */ + /* several ranks and polling for end of each conversion. */ + /* For code simplicity sake, this particular case is generalized to */ + /* ADC configured in DMA mode and and polling for end of each conversion. */ + if ((hadc->Instance->CFGR1 & ADC_CFGR1_DMAEN) != 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + return HAL_ERROR; + } + else + { + tmp_flag_end = (ADC_FLAG_EOC); + } + } + + /* Get tick count */ + tickstart = HAL_GetTick(); + + /* Wait until End of unitary conversion or sequence conversions flag is raised */ + while ((hadc->Instance->ISR & tmp_flag_end) == 0UL) + { + /* Check if timeout is disabled (set to infinite wait) */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + /* New check to avoid false timeout detection in case of preemption */ + if ((hadc->Instance->ISR & tmp_flag_end) == 0UL) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + } + + /* Update ADC state machine */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); + + /* Determine whether any further conversion upcoming on group regular */ + /* by external trigger, continuous mode or scan sequence on going. */ + if ((LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) + && (hadc->Init.ContinuousConvMode == DISABLE) + ) + { + /* Check whether end of sequence is reached */ + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS)) + { + /* Allowed to modify bits ADC_IT_EOC/ADC_IT_EOS only if bit */ + /* ADSTART==0 (no conversion on going) */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Disable ADC end of single conversion interrupt on group regular */ + /* Note: Overrun interrupt was enabled with EOC interrupt in */ + /* HAL_Start_IT(), but is not disabled here because can be used */ + /* by overrun IRQ process below. */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC | ADC_IT_EOS); + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + else + { + /* Change ADC state to error state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + } + + /* Clear end of conversion flag of regular group if low power feature */ + /* "LowPowerAutoWait " is disabled, to not interfere with this feature */ + /* until data register is read using function HAL_ADC_GetValue(). */ + if (hadc->Init.LowPowerAutoWait == DISABLE) + { + /* Clear regular group conversion flag */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS)); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Poll for ADC event. + * @param hadc ADC handle + * @param EventType the ADC event type. + * This parameter can be one of the following values: + * @arg @ref ADC_EOSMP_EVENT ADC End of Sampling event + * @arg @ref ADC_AWD1_EVENT ADC Analog watchdog 1 event (main analog watchdog, present on + * all STM32 series) + * @arg @ref ADC_AWD2_EVENT ADC Analog watchdog 2 event (additional analog watchdog, not present on + * all STM32 series) + * @arg @ref ADC_AWD3_EVENT ADC Analog watchdog 3 event (additional analog watchdog, not present on + * all STM32 series) + * @arg @ref ADC_OVR_EVENT ADC Overrun event + * @param Timeout Timeout value in millisecond. + * @note The relevant flag is cleared if found to be set, except for ADC_FLAG_OVR. + * Indeed, the latter is reset only if hadc->Init.Overrun field is set + * to ADC_OVR_DATA_OVERWRITTEN. Otherwise, data register may be potentially overwritten + * by a new converted data as soon as OVR is cleared. + * To reset OVR flag once the preserved data is retrieved, the user can resort + * to macro __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef *hadc, uint32_t EventType, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_EVENT_TYPE(EventType)); + + /* Get tick count */ + tickstart = HAL_GetTick(); + + /* Check selected event flag */ + while (__HAL_ADC_GET_FLAG(hadc, EventType) == 0UL) + { + /* Check if timeout is disabled (set to infinite wait) */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + /* New check to avoid false timeout detection in case of preemption */ + if (__HAL_ADC_GET_FLAG(hadc, EventType) == 0UL) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + } + + switch (EventType) + { + /* End Of Sampling event */ + case ADC_EOSMP_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOSMP); + + /* Clear the End Of Sampling flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOSMP); + + break; + + /* Analog watchdog (level out of window) event */ + /* Note: In case of several analog watchdog enabled, if needed to know */ + /* which one triggered and on which ADCx, test ADC state of analog watchdog */ + /* flags HAL_ADC_STATE_AWD1/2/3 using function "HAL_ADC_GetState()". */ + /* For example: */ + /* " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD1) != 0UL) " */ + /* " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD2) != 0UL) " */ + /* " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD3) != 0UL) " */ + + /* Check analog watchdog 1 flag */ + case ADC_AWD_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD1); + + break; + + /* Check analog watchdog 2 flag */ + case ADC_AWD2_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD2); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD2); + + break; + + /* Check analog watchdog 3 flag */ + case ADC_AWD3_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD3); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD3); + + break; + + /* Overrun event */ + default: /* Case ADC_OVR_EVENT */ + /* If overrun is set to overwrite previous data, overrun event is not */ + /* considered as an error. */ + /* (cf ref manual "Managing conversions without using the DMA and without */ + /* overrun ") */ + if (hadc->Init.Overrun == ADC_OVR_DATA_PRESERVED) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_OVR); + + /* Set ADC error code to overrun */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR); + } + else + { + /* Clear ADC Overrun flag only if Overrun is set to ADC_OVR_DATA_OVERWRITTEN + otherwise, data register is potentially overwritten by new converted data as soon + as OVR is cleared. */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); + } + break; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Enable ADC, start conversion of regular group with interruption. + * @note Interruptions enabled in this function according to initialization + * setting : EOC (end of conversion), EOS (end of sequence), + * OVR overrun. + * Each of these interruptions has its dedicated callback function. + * @note To guarantee a proper reset of all interruptions once all the needed + * conversions are obtained, HAL_ADC_Stop_IT() must be called to ensure + * a correct stop of the IT-based conversions. + * @note By default, HAL_ADC_Start_IT() does not enable the End Of Sampling + * interruption. If required (e.g. in case of oversampling with trigger + * mode), the user must: + * 1. first clear the EOSMP flag if set with macro __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOSMP) + * 2. then enable the EOSMP interrupt with macro __HAL_ADC_ENABLE_IT(hadc, ADC_IT_EOSMP) + * before calling HAL_ADC_Start_IT(). + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Perform ADC enable and conversion start if no conversion is on going */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR | HAL_ADC_STATE_REG_EOSMP, + HAL_ADC_STATE_REG_BUSY); + + + /* Set ADC error code */ + /* Reset all ADC error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Clear ADC group regular conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_OVR)); + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Disable all interruptions before enabling the desired ones */ + __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_EOS | ADC_IT_OVR)); + + /* Enable ADC end of conversion interrupt */ + switch (hadc->Init.EOCSelection) + { + case ADC_EOC_SEQ_CONV: + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_EOS); + break; + /* case ADC_EOC_SINGLE_CONV */ + default: + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_EOC); + break; + } + + /* Enable ADC overrun interrupt */ + /* If hadc->Init.Overrun is set to ADC_OVR_DATA_PRESERVED, only then is + ADC_IT_OVR enabled; otherwise data overwrite is considered as normal + behavior and no CPU time is lost for a non-processed interruption */ + if (hadc->Init.Overrun == ADC_OVR_DATA_PRESERVED) + { + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR); + } + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Start ADC group regular conversion */ + LL_ADC_REG_StartConversion(hadc->Instance); + } + else + { + __HAL_UNLOCK(hadc); + } + + } + else + { + tmp_hal_status = HAL_BUSY; + } + + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected group in + * case of auto_injection mode), disable interrution of + * end-of-conversion, disable ADC peripheral. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + __HAL_LOCK(hadc); + + /* 1. Stop potential conversion on going, on ADC group regular */ + tmp_hal_status = ADC_ConversionStop(hadc); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* Disable ADC end of conversion interrupt for regular group */ + /* Disable ADC overrun interrupt */ + __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_EOS | ADC_IT_OVR)); + + /* 2. Disable the ADC peripheral */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + } + + __HAL_UNLOCK(hadc); + + return tmp_hal_status; +} + +/** + * @brief Enable ADC, start conversion of regular group and transfer result through DMA. + * @note Interruptions enabled in this function: + * overrun (if applicable), DMA half transfer, DMA transfer complete. + * Each of these interruptions has its dedicated callback function. + * @param hadc ADC handle + * @param pData Destination Buffer address. + * @param Length Number of data to be transferred from ADC peripheral to memory + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Perform ADC enable and conversion start if no conversion is on going */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + __HAL_LOCK(hadc); + + /* Specific case for first call occurrence of this function (DMA transfer */ + /* not activated and ADC disabled), DMA transfer must be activated */ + /* with ADC disabled. */ + if ((hadc->Instance->CFGR1 & ADC_CFGR1_DMAEN) == 0UL) + { + if (LL_ADC_IsEnabled(hadc->Instance) != 0UL) + { + /* Disable ADC */ + LL_ADC_Disable(hadc->Instance); + } + + /* Enable ADC DMA mode */ + hadc->Instance->CFGR1 |= ADC_CFGR1_DMAEN; + } + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR | HAL_ADC_STATE_REG_EOSMP, + HAL_ADC_STATE_REG_BUSY); + + /* Set ADC error code */ + /* Reset all ADC error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Set the DMA transfer complete callback */ + hadc->DMA_Handle->XferCpltCallback = ADC_DMAConvCplt; + + /* Set the DMA half transfer complete callback */ + hadc->DMA_Handle->XferHalfCpltCallback = ADC_DMAHalfConvCplt; + + /* Set the DMA error callback */ + hadc->DMA_Handle->XferErrorCallback = ADC_DMAError; + + + /* Manage ADC and DMA start: ADC overrun interruption, DMA start, ADC */ + /* start (in case of SW start): */ + + /* Clear regular group conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC */ + /* operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_OVR)); + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Enable ADC overrun interrupt */ + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR); + + /* Start the DMA channel */ + tmp_hal_status = HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&hadc->Instance->DR, (uint32_t)pData, Length); + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Start ADC group regular conversion */ + LL_ADC_REG_StartConversion(hadc->Instance); + } + } + else + { + tmp_hal_status = HAL_BUSY; + } + + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected group in + * case of auto_injection mode), disable ADC DMA transfer, disable + * ADC peripheral. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + __HAL_LOCK(hadc); + + /* 1. Stop potential ADC group regular conversion on going */ + tmp_hal_status = ADC_ConversionStop(hadc); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* Disable the DMA channel (in case of DMA in circular mode or stop */ + /* while DMA transfer is on going) */ + if (hadc->DMA_Handle->State == HAL_DMA_STATE_BUSY) + { + tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle); + + /* Check if DMA channel effectively disabled */ + if (tmp_hal_status != HAL_OK) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA); + } + } + + /* Disable ADC overrun interrupt */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR); + + /* 2. Disable the ADC peripheral */ + /* Update "tmp_hal_status" only if DMA channel disabling passed, */ + /* to keep in memory a potential failing status. */ + if (tmp_hal_status == HAL_OK) + { + tmp_hal_status = ADC_Disable(hadc); + } + else + { + (void)ADC_Disable(hadc); + } + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + + /* Disable ADC DMA (ADC DMA configuration of continuous requests is kept) */ + CLEAR_BIT(hadc->Instance->CFGR1, ADC_CFGR1_DMAEN); + } + + __HAL_UNLOCK(hadc); + + return tmp_hal_status; +} + +/** + * @brief Get ADC regular group conversion result. + * @note Reading register DR automatically clears ADC flag EOC + * (ADC group regular end of unitary conversion). + * @note This function does not clear ADC flag EOS + * (ADC group regular end of sequence conversion). + * Occurrence of flag EOS rising: + * - If sequencer is composed of 1 rank, flag EOS is equivalent + * to flag EOC. + * - If sequencer is composed of several ranks, during the scan + * sequence flag EOC only is raised, at the end of the scan sequence + * both flags EOC and EOS are raised. + * To clear this flag, either use function: + * in programming model IT: @ref HAL_ADC_IRQHandler(), in programming + * model polling: @ref HAL_ADC_PollForConversion() + * or @ref __HAL_ADC_CLEAR_FLAG(&hadc, ADC_FLAG_EOS). + * @param hadc ADC handle + * @retval ADC group regular conversion data + */ +uint32_t HAL_ADC_GetValue(const ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Note: EOC flag is not cleared here by software because automatically */ + /* cleared by hardware when reading register DR. */ + + /* Return ADC converted value */ + return hadc->Instance->DR; +} + +/** + * @brief Handle ADC interrupt request. + * @param hadc ADC handle + * @retval None + */ +void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc) +{ + uint32_t overrun_error = 0UL; /* flag set if overrun occurrence has to be considered as an error */ + uint32_t tmp_isr = hadc->Instance->ISR; + uint32_t tmp_ier = hadc->Instance->IER; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_EOC_SELECTION(hadc->Init.EOCSelection)); + + /* ========== Check End of Sampling flag for ADC group regular ========== */ + if (((tmp_isr & ADC_FLAG_EOSMP) == ADC_FLAG_EOSMP) && ((tmp_ier & ADC_IT_EOSMP) == ADC_IT_EOSMP)) + { + /* Update state machine on end of sampling status if not in error state */ + if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOSMP); + } + + /* End Of Sampling callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->EndOfSamplingCallback(hadc); +#else + HAL_ADCEx_EndOfSamplingCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear regular group conversion flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOSMP); + } + + /* ====== Check ADC group regular end of unitary conversion sequence conversions ===== */ + if ((((tmp_isr & ADC_FLAG_EOC) == ADC_FLAG_EOC) && ((tmp_ier & ADC_IT_EOC) == ADC_IT_EOC)) || + (((tmp_isr & ADC_FLAG_EOS) == ADC_FLAG_EOS) && ((tmp_ier & ADC_IT_EOS) == ADC_IT_EOS))) + { + /* Update state machine on conversion status if not in error state */ + if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); + } + + /* Determine whether any further conversion upcoming on group regular */ + /* by external trigger, continuous mode or scan sequence on going */ + /* to disable interruption. */ + if ((LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) + && (hadc->Init.ContinuousConvMode == DISABLE) + ) + { + /* If End of Sequence is reached, disable interrupts */ + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS)) + { + /* Allowed to modify bits ADC_IT_EOC/ADC_IT_EOS only if bit */ + /* ADSTART==0 (no conversion on going) */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Disable ADC end of single conversion interrupt on group regular */ + /* Note: Overrun interrupt was enabled with EOC interrupt in */ + /* HAL_Start_IT(), but is not disabled here because can be used */ + /* by overrun IRQ process below. */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC | ADC_IT_EOS); + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + else + { + /* Change ADC state to error state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + } + + /* Conversion complete callback */ + /* Note: Into callback function "HAL_ADC_ConvCpltCallback()", */ + /* to determine if conversion has been triggered from EOC or EOS, */ + /* possibility to use: */ + /* " if ( __HAL_ADC_GET_FLAG(&hadc, ADC_FLAG_EOS)) " */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ConvCpltCallback(hadc); +#else + HAL_ADC_ConvCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear regular group conversion flag */ + /* Note: in case of overrun set to ADC_OVR_DATA_PRESERVED, end of */ + /* conversion flags clear induces the release of the preserved data.*/ + /* Therefore, if the preserved data value is needed, it must be */ + /* read preliminarily into HAL_ADC_ConvCpltCallback(). */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS)); + } + + /* ========== Check Analog watchdog 1 flag ========== */ + if (((tmp_isr & ADC_FLAG_AWD1) == ADC_FLAG_AWD1) && ((tmp_ier & ADC_IT_AWD1) == ADC_IT_AWD1)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Level out of window 1 callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->LevelOutOfWindowCallback(hadc); +#else + HAL_ADC_LevelOutOfWindowCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD1); + } + + /* ========== Check analog watchdog 2 flag ========== */ + if (((tmp_isr & ADC_FLAG_AWD2) == ADC_FLAG_AWD2) && ((tmp_ier & ADC_IT_AWD2) == ADC_IT_AWD2)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD2); + + /* Level out of window 2 callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->LevelOutOfWindow2Callback(hadc); +#else + HAL_ADCEx_LevelOutOfWindow2Callback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD2); + } + + /* ========== Check analog watchdog 3 flag ========== */ + if (((tmp_isr & ADC_FLAG_AWD3) == ADC_FLAG_AWD3) && ((tmp_ier & ADC_IT_AWD3) == ADC_IT_AWD3)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD3); + + /* Level out of window 3 callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->LevelOutOfWindow3Callback(hadc); +#else + HAL_ADCEx_LevelOutOfWindow3Callback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD3); + } + + /* ========== Check Overrun flag ========== */ + if (((tmp_isr & ADC_FLAG_OVR) == ADC_FLAG_OVR) && ((tmp_ier & ADC_IT_OVR) == ADC_IT_OVR)) + { + /* If overrun is set to overwrite previous data (default setting), */ + /* overrun event is not considered as an error. */ + /* (cf ref manual "Managing conversions without using the DMA and without */ + /* overrun ") */ + /* Exception for usage with DMA overrun event always considered as an */ + /* error. */ + if (hadc->Init.Overrun == ADC_OVR_DATA_PRESERVED) + { + overrun_error = 1UL; + } + else + { + /* Check DMA configuration */ + if (LL_ADC_REG_GetDMATransfer(hadc->Instance) != LL_ADC_REG_DMA_TRANSFER_NONE) + { + overrun_error = 1UL; + } + } + + if (overrun_error == 1UL) + { + /* Change ADC state to error state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_OVR); + + /* Set ADC error code to overrun */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR); + + /* Error callback */ + /* Note: In case of overrun, ADC conversion data is preserved until */ + /* flag OVR is reset. */ + /* Therefore, old ADC conversion data can be retrieved in */ + /* function "HAL_ADC_ErrorCallback()". */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ErrorCallback(hadc); +#else + HAL_ADC_ErrorCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + + /* Clear ADC overrun flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); + } + + /* ========== Check channel configuration ready flag ========== */ + if (((tmp_isr & ADC_FLAG_CCRDY) == ADC_FLAG_CCRDY) && ((tmp_ier & ADC_IT_CCRDY) == ADC_IT_CCRDY)) + { + /* Channel configuration ready callback */ + HAL_ADCEx_ChannelConfigReadyCallback(hadc); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_CCRDY); + } +} + +/** + * @brief Conversion complete callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ConvCpltCallback must be implemented in the user file. + */ +} + +/** + * @brief Conversion DMA half-transfer callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ConvHalfCpltCallback must be implemented in the user file. + */ +} + +/** + * @brief Analog watchdog 1 callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_LevelOutOfWindowCallback must be implemented in the user file. + */ +} + +/** + * @brief ADC error callback in non-blocking mode + * (ADC conversion with interruption or transfer by DMA). + * @note In case of error due to overrun when using ADC with DMA transfer + * (HAL ADC handle parameter "ErrorCode" to state "HAL_ADC_ERROR_OVR"): + * - Reinitialize the DMA using function "HAL_ADC_Stop_DMA()". + * - If needed, restart a new ADC conversion using function + * "HAL_ADC_Start_DMA()" + * (this function is also clearing overrun flag) + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ErrorCallback must be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure channels on regular group + (+) Configure the analog watchdog + +@endverbatim + * @{ + */ + +/** + * @brief Configure a channel to be assigned to ADC group regular. + * @note In case of usage of internal measurement channels: + * Vbat/VrefInt/TempSensor. + * These internal paths can be disabled using function + * HAL_ADC_DeInit(). + * @note Possibility to update parameters on the fly: + * This function initializes channel into ADC group regular, + * following calls to this function can be used to reconfigure + * some parameters of structure "ADC_ChannelConfTypeDef" on the fly, + * without resetting the ADC. + * The setting of these parameters is conditioned to ADC state: + * Refer to comments of structure "ADC_ChannelConfTypeDef". + * @param hadc ADC handle + * @param pConfig Structure of ADC channel assigned to ADC group regular. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, const ADC_ChannelConfTypeDef *pConfig) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmp_config_internal_channel; + __IO uint32_t wait_loop_index = 0UL; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_CHANNEL(pConfig->Channel)); + assert_param(IS_ADC_SAMPLING_TIME_COMMON(pConfig->SamplingTime)); + + if ((hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED) || + (hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED_BACKWARD)) + { + assert_param(IS_ADC_REGULAR_RANK_SEQ_FIXED(pConfig->Rank)); + } + else + { + assert_param(IS_ADC_REGULAR_NB_CONV(hadc->Init.NbrOfConversion)); + + assert_param(IS_ADC_REGULAR_RANK(pConfig->Rank)); + } + + __HAL_LOCK(hadc); + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated when ADC is disabled or enabled without */ + /* conversion on going on regular group: */ + /* - Channel number */ + /* - Channel sampling time */ + /* - Management of internal measurement channels: VrefInt/TempSensor/Vbat */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Configure channel: depending on rank setting, add it or remove it from */ + /* ADC sequencer. */ + /* If sequencer set to not fully configurable with channel rank set to */ + /* none, remove the channel from the sequencer. */ + /* Otherwise (sequencer set to fully configurable or to to not fully */ + /* configurable with channel rank to be set), configure the selected */ + /* channel. */ + if (pConfig->Rank != ADC_RANK_NONE) + { + /* Regular sequence configuration */ + /* Note: ADC channel configuration requires few ADC clock cycles */ + /* to be ready. Processing of ADC settings in this function */ + /* induce that a specific wait time is not necessary. */ + /* For more details on ADC channel configuration ready, */ + /* refer to function "LL_ADC_IsActiveFlag_CCRDY()". */ + if ((hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED) || + (hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED_BACKWARD)) + { + /* Sequencer set to not fully configurable: */ + /* Set the channel by enabling the corresponding bitfield. */ + LL_ADC_REG_SetSequencerChAdd(hadc->Instance, pConfig->Channel); + } + else + { + /* Sequencer set to fully configurable: */ + /* Set the channel by entering it into the selected rank. */ + + /* Memorize the channel set into variable in HAL ADC handle */ + MODIFY_REG(hadc->ADCGroupRegularSequencerRanks, + ADC_CHSELR_SQ1 << (pConfig->Rank & 0x1FUL), + __LL_ADC_CHANNEL_TO_DECIMAL_NB(pConfig->Channel) << (pConfig->Rank & 0x1FUL)); + + /* If the selected rank is below ADC group regular sequencer length, */ + /* apply the configuration in ADC register. */ + /* Note: Otherwise, configuration is not applied. */ + /* To apply it, parameter'NbrOfConversion' must be increased. */ + if (((pConfig->Rank >> 2UL) + 1UL) <= hadc->Init.NbrOfConversion) + { + LL_ADC_REG_SetSequencerRanks(hadc->Instance, pConfig->Rank, pConfig->Channel); + } + } + + /* Set sampling time of the selected ADC channel */ + LL_ADC_SetChannelSamplingTime(hadc->Instance, pConfig->Channel, pConfig->SamplingTime); + + /* Management of internal measurement channels: VrefInt/TempSensor/Vbat */ + /* internal measurement paths enable: If internal channel selected, */ + /* enable dedicated internal buffers and path. */ + /* Note: these internal measurement paths can be disabled using */ + /* HAL_ADC_DeInit() or removing the channel from sequencer with */ + /* channel configuration parameter "Rank". */ + if (__LL_ADC_IS_CHANNEL_INTERNAL(pConfig->Channel)) + { + tmp_config_internal_channel = LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance)); + + /* If the requested internal measurement path has already been enabled, */ + /* bypass the configuration processing. */ + if ((pConfig->Channel == ADC_CHANNEL_TEMPSENSOR) && + ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_TEMPSENSOR) == 0UL)) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + LL_ADC_PATH_INTERNAL_TEMPSENSOR | tmp_config_internal_channel); + + /* Delay for temperature sensor stabilization time */ + /* Wait loop initialization and execution */ + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = ((LL_ADC_DELAY_TEMPSENSOR_STAB_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL)); + while (wait_loop_index != 0UL) + { + wait_loop_index--; + } + } + else if ((pConfig->Channel == ADC_CHANNEL_VBAT) + && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VBAT) == 0UL)) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + LL_ADC_PATH_INTERNAL_VBAT | tmp_config_internal_channel); + } + else if ((pConfig->Channel == ADC_CHANNEL_VREFINT) && + ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VREFINT) == 0UL)) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + LL_ADC_PATH_INTERNAL_VREFINT | tmp_config_internal_channel); + } + else + { + /* nothing to do */ + } + } + } + else + { + /* Regular sequencer configuration */ + /* Note: Case of sequencer set to fully configurable: */ + /* Sequencer rank cannot be disabled, only affected to */ + /* another channel. */ + /* To remove a rank, use parameter 'NbrOfConversion". */ + if ((hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED) || + (hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED_BACKWARD)) + { + /* Sequencer set to not fully configurable: */ + /* Reset the channel by disabling the corresponding bitfield. */ + LL_ADC_REG_SetSequencerChRem(hadc->Instance, pConfig->Channel); + } + + /* Management of internal measurement channels: Vbat/VrefInt/TempSensor. */ + /* If internal channel selected, enable dedicated internal buffers and */ + /* paths. */ + if (__LL_ADC_IS_CHANNEL_INTERNAL(pConfig->Channel)) + { + tmp_config_internal_channel = LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance)); + + if (pConfig->Channel == ADC_CHANNEL_TEMPSENSOR) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + ~LL_ADC_PATH_INTERNAL_TEMPSENSOR & tmp_config_internal_channel); + } + else if (pConfig->Channel == ADC_CHANNEL_VBAT) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + ~LL_ADC_PATH_INTERNAL_VBAT & tmp_config_internal_channel); + } + else if (pConfig->Channel == ADC_CHANNEL_VREFINT) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + ~LL_ADC_PATH_INTERNAL_VREFINT & tmp_config_internal_channel); + } + else + { + /* nothing to do */ + } + } + } + } + + /* If a conversion is on going on regular group, no update on regular */ + /* channel could be done on neither of the channel configuration structure */ + /* parameters. */ + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + + __HAL_UNLOCK(hadc); + + return tmp_hal_status; +} + +/** + * @brief Configure the analog watchdog. + * @note Possibility to update parameters on the fly: + * This function initializes the selected analog watchdog, successive + * calls to this function can be used to reconfigure some parameters + * of structure "ADC_AnalogWDGConfTypeDef" on the fly, without resetting + * the ADC. + * The setting of these parameters is conditioned to ADC state. + * For parameters constraints, see comments of structure + * "ADC_AnalogWDGConfTypeDef". + * @note On this STM32 series, analog watchdog thresholds can be modified + * while ADC conversion is on going. + * In this case, some constraints must be taken into account: + * the programmed threshold values are effective from the next + * ADC EOC (end of unitary conversion). + * Considering that registers write delay may happen due to + * bus activity, this might cause an uncertainty on the + * effective timing of the new programmed threshold values. + * @param hadc ADC handle + * @param pAnalogWDGConfig Structure of ADC analog watchdog configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, const ADC_AnalogWDGConfTypeDef *pAnalogWDGConfig) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmp_awd_high_threshold_shifted; + uint32_t tmp_awd_low_threshold_shifted; + uint32_t backup_setting_adc_enable_state = 0UL; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_ANALOG_WATCHDOG_NUMBER(pAnalogWDGConfig->WatchdogNumber)); + assert_param(IS_ADC_ANALOG_WATCHDOG_MODE(pAnalogWDGConfig->WatchdogMode)); + assert_param(IS_FUNCTIONAL_STATE(pAnalogWDGConfig->ITMode)); + + if (pAnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REG) + { + assert_param(IS_ADC_CHANNEL(pAnalogWDGConfig->Channel)); + } + + /* Verify thresholds range */ + if (hadc->Init.OversamplingMode == ENABLE) + { + /* Case of oversampling enabled: depending on ratio and shift configuration, + analog watchdog thresholds can be higher than ADC resolution. + Verify if thresholds are within maximum thresholds range. */ + assert_param(IS_ADC_RANGE(ADC_RESOLUTION_12B, pAnalogWDGConfig->HighThreshold)); + assert_param(IS_ADC_RANGE(ADC_RESOLUTION_12B, pAnalogWDGConfig->LowThreshold)); + } + else + { + /* Verify if thresholds are within the selected ADC resolution */ + assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), pAnalogWDGConfig->HighThreshold)); + assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), pAnalogWDGConfig->LowThreshold)); + } + + __HAL_LOCK(hadc); + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated when ADC is disabled or enabled without */ + /* conversion on going on ADC group regular: */ + /* - Analog watchdog channels */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Analog watchdog configuration */ + if (pAnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_1) + { + /* Constraint of ADC on this STM32 series: ADC must be disable + to modify bitfields of register ADC_CFGR1 */ + if (LL_ADC_IsEnabled(hadc->Instance) != 0UL) + { + backup_setting_adc_enable_state = 1UL; + tmp_hal_status = ADC_Disable(hadc); + } + + /* Configuration of analog watchdog: */ + /* - Set the analog watchdog enable mode: one or overall group of */ + /* channels. */ + switch (pAnalogWDGConfig->WatchdogMode) + { + case ADC_ANALOGWATCHDOG_SINGLE_REG: + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, + __LL_ADC_ANALOGWD_CHANNEL_GROUP(pAnalogWDGConfig->Channel, + LL_ADC_GROUP_REGULAR)); + break; + + case ADC_ANALOGWATCHDOG_ALL_REG: + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, LL_ADC_AWD_ALL_CHANNELS_REG); + break; + + default: /* ADC_ANALOGWATCHDOG_NONE */ + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, LL_ADC_AWD_DISABLE); + break; + } + + if (backup_setting_adc_enable_state == 1UL) + { + if (tmp_hal_status == HAL_OK) + { + tmp_hal_status = ADC_Enable(hadc); + } + } + + /* Update state, clear previous result related to AWD1 */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Clear flag ADC analog watchdog */ + /* Note: Flag cleared Clear the ADC Analog watchdog flag to be ready */ + /* to use for HAL_ADC_IRQHandler() or HAL_ADC_PollForEvent() */ + /* (in case left enabled by previous ADC operations). */ + LL_ADC_ClearFlag_AWD1(hadc->Instance); + + /* Configure ADC analog watchdog interrupt */ + if (pAnalogWDGConfig->ITMode == ENABLE) + { + LL_ADC_EnableIT_AWD1(hadc->Instance); + } + else + { + LL_ADC_DisableIT_AWD1(hadc->Instance); + } + } + /* Case of ADC_ANALOGWATCHDOG_2 or ADC_ANALOGWATCHDOG_3 */ + else + { + switch (pAnalogWDGConfig->WatchdogMode) + { + case ADC_ANALOGWATCHDOG_SINGLE_REG: + /* Update AWD by bitfield to keep the possibility to monitor */ + /* several channels by successive calls of this function. */ + if (pAnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_2) + { + SET_BIT(hadc->Instance->AWD2CR, (1UL << __LL_ADC_CHANNEL_TO_DECIMAL_NB(pAnalogWDGConfig->Channel))); + } + else + { + SET_BIT(hadc->Instance->AWD3CR, (1UL << __LL_ADC_CHANNEL_TO_DECIMAL_NB(pAnalogWDGConfig->Channel))); + } + break; + + case ADC_ANALOGWATCHDOG_ALL_REG: + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, + pAnalogWDGConfig->WatchdogNumber, + LL_ADC_AWD_ALL_CHANNELS_REG); + break; + + default: /* ADC_ANALOGWATCHDOG_NONE */ + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, pAnalogWDGConfig->WatchdogNumber, LL_ADC_AWD_DISABLE); + break; + } + + if (pAnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_2) + { + /* Update state, clear previous result related to AWD2 */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_AWD2); + + /* Clear flag ADC analog watchdog */ + /* Note: Flag cleared Clear the ADC Analog watchdog flag to be ready */ + /* to use for HAL_ADC_IRQHandler() or HAL_ADC_PollForEvent() */ + /* (in case left enabled by previous ADC operations). */ + LL_ADC_ClearFlag_AWD2(hadc->Instance); + + /* Configure ADC analog watchdog interrupt */ + if (pAnalogWDGConfig->ITMode == ENABLE) + { + LL_ADC_EnableIT_AWD2(hadc->Instance); + } + else + { + LL_ADC_DisableIT_AWD2(hadc->Instance); + } + } + /* (pAnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_3) */ + else + { + /* Update state, clear previous result related to AWD3 */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_AWD3); + + /* Clear flag ADC analog watchdog */ + /* Note: Flag cleared Clear the ADC Analog watchdog flag to be ready */ + /* to use for HAL_ADC_IRQHandler() or HAL_ADC_PollForEvent() */ + /* (in case left enabled by previous ADC operations). */ + LL_ADC_ClearFlag_AWD3(hadc->Instance); + + /* Configure ADC analog watchdog interrupt */ + if (pAnalogWDGConfig->ITMode == ENABLE) + { + LL_ADC_EnableIT_AWD3(hadc->Instance); + } + else + { + LL_ADC_DisableIT_AWD3(hadc->Instance); + } + } + } + + } + + /* Analog watchdog thresholds configuration */ + if (pAnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_1) + { + /* Shift the offset with respect to the selected ADC resolution: */ + /* Thresholds have to be left-aligned on bit 11, the LSB (right bits) */ + /* are set to 0. */ + tmp_awd_high_threshold_shifted = ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(hadc, pAnalogWDGConfig->HighThreshold); + tmp_awd_low_threshold_shifted = ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(hadc, pAnalogWDGConfig->LowThreshold); + } + /* Case of ADC_ANALOGWATCHDOG_2 and ADC_ANALOGWATCHDOG_3 */ + else + { + /* No need to shift the offset with respect to the selected ADC resolution: */ + /* Thresholds have to be left-aligned on bit 11, the LSB (right bits) */ + /* are set to 0. */ + tmp_awd_high_threshold_shifted = pAnalogWDGConfig->HighThreshold; + tmp_awd_low_threshold_shifted = pAnalogWDGConfig->LowThreshold; + } + + /* Set ADC analog watchdog thresholds value of both thresholds high and low */ + LL_ADC_ConfigAnalogWDThresholds(hadc->Instance, pAnalogWDGConfig->WatchdogNumber, tmp_awd_high_threshold_shifted, + tmp_awd_low_threshold_shifted); + + __HAL_UNLOCK(hadc); + + return tmp_hal_status; +} + + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions_Group4 Peripheral State functions + * @brief ADC Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral state and errors functions ##### + =============================================================================== + [..] + This subsection provides functions to get in run-time the status of the + peripheral. + (+) Check the ADC state + (+) Check the ADC error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the ADC handle state. + * @note ADC state machine is managed by bitfields, ADC status must be + * compared with states bits. + * For example: + * " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_REG_BUSY) != 0UL) " + * " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD1) != 0UL) " + * @param hadc ADC handle + * @retval ADC handle state (bitfield on 32 bits) + */ +uint32_t HAL_ADC_GetState(const ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Return ADC handle state */ + return hadc->State; +} + +/** + * @brief Return the ADC error code. + * @param hadc ADC handle + * @retval ADC error code (bitfield on 32 bits) + */ +uint32_t HAL_ADC_GetError(const ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + return hadc->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_Functions ADC Private Functions + * @{ + */ + +/** + * @brief Stop ADC conversion. + * @note Prerequisite condition to use this function: ADC conversions must be + * stopped to disable the ADC. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef *hadc) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Verification if ADC is not already stopped on regular group to bypass */ + /* this function if not needed. */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) != 0UL) + { + /* Stop potential conversion on going on regular group */ + /* Software is allowed to set ADSTP only when ADSTART=1 and ADDIS=0 */ + if (LL_ADC_IsDisableOngoing(hadc->Instance) == 0UL) + { + /* Stop ADC group regular conversion */ + LL_ADC_REG_StopConversion(hadc->Instance); + } + + /* Wait for conversion effectively stopped */ + /* Get tick count */ + tickstart = HAL_GetTick(); + + while ((hadc->Instance->CR & ADC_CR_ADSTART) != 0UL) + { + if ((HAL_GetTick() - tickstart) > ADC_STOP_CONVERSION_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if ((hadc->Instance->CR & ADC_CR_ADSTART) != 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + } + } + + } + + /* Return HAL status */ + return HAL_OK; +} + +/** + * @brief Enable the selected ADC. + * @note Prerequisite condition to use this function: ADC must be disabled + * and voltage regulator must be enabled (done into HAL_ADC_Init()). + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef *hadc) +{ + uint32_t tickstart; + __IO uint32_t wait_loop_index = 0UL; + + /* ADC enable and wait for ADC ready (in case of ADC is disabled or */ + /* enabling phase not yet completed: flag ADC ready not yet set). */ + /* Timeout implemented to not be stuck if ADC cannot be enabled (possible */ + /* causes: ADC clock not running, ...). */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + /* Check if conditions to enable the ADC are fulfilled */ + if ((hadc->Instance->CR & (ADC_CR_ADCAL | ADC_CR_ADSTP | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN)) != 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + + /* Enable the ADC peripheral */ + LL_ADC_Enable(hadc->Instance); + + if ((LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance)) & LL_ADC_PATH_INTERNAL_TEMPSENSOR) + != 0UL) + { + /* Delay for temperature sensor buffer stabilization time */ + /* Wait loop initialization and execution */ + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = ((LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US / 10UL) + * ((SystemCoreClock / (100000UL * 2UL)) + 1UL)); + while (wait_loop_index != 0UL) + { + wait_loop_index--; + } + } + + /* If low power mode AutoPowerOff is enabled, power-on/off phases are */ + /* performed automatically by hardware and flag ADC ready is not set. */ + if (hadc->Init.LowPowerAutoPowerOff != ENABLE) + { + /* Wait for ADC effectively enabled */ + tickstart = HAL_GetTick(); + + while (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_RDY) == 0UL) + { + /* If ADEN bit is set less than 4 ADC clock cycles after the ADCAL bit + has been cleared (after a calibration), ADEN bit is reset by the + calibration logic. + The workaround is to continue setting ADEN until ADRDY is becomes 1. + Additionally, ADC_ENABLE_TIMEOUT is defined to encompass this + 4 ADC clock cycle duration */ + /* Note: Test of ADC enabled required due to hardware constraint to */ + /* not enable ADC if already enabled. */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + LL_ADC_Enable(hadc->Instance); + } + + if ((HAL_GetTick() - tickstart) > ADC_ENABLE_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_RDY) == 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + } + } + } + } + + /* Return HAL status */ + return HAL_OK; +} + +/** + * @brief Disable the selected ADC. + * @note Prerequisite condition to use this function: ADC conversions must be + * stopped. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef *hadc) +{ + uint32_t tickstart; + const uint32_t tmp_adc_is_disable_on_going = LL_ADC_IsDisableOngoing(hadc->Instance); + + /* Verification if ADC is not already disabled: */ + /* Note: forbidden to disable ADC (set bit ADC_CR_ADDIS) if ADC is already */ + /* disabled. */ + if ((LL_ADC_IsEnabled(hadc->Instance) != 0UL) + && (tmp_adc_is_disable_on_going == 0UL) + ) + { + /* Check if conditions to disable the ADC are fulfilled */ + if ((hadc->Instance->CR & (ADC_CR_ADSTART | ADC_CR_ADEN)) == ADC_CR_ADEN) + { + /* Disable the ADC peripheral */ + LL_ADC_Disable(hadc->Instance); + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOSMP | ADC_FLAG_RDY)); + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + + /* Wait for ADC effectively disabled */ + /* Get tick count */ + tickstart = HAL_GetTick(); + + while ((hadc->Instance->CR & ADC_CR_ADEN) != 0UL) + { + if ((HAL_GetTick() - tickstart) > ADC_DISABLE_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if ((hadc->Instance->CR & ADC_CR_ADEN) != 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + } + } + } + + /* Return HAL status */ + return HAL_OK; +} + +/** + * @brief DMA transfer complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Update state machine on conversion status if not in error state */ + if ((hadc->State & (HAL_ADC_STATE_ERROR_INTERNAL | HAL_ADC_STATE_ERROR_DMA)) == 0UL) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); + + /* Determine whether any further conversion upcoming on group regular */ + /* by external trigger, continuous mode or scan sequence on going */ + /* to disable interruption. */ + if ((LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) + && (hadc->Init.ContinuousConvMode == DISABLE) + ) + { + /* If End of Sequence is reached, disable interrupts */ + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS)) + { + /* Allowed to modify bits ADC_IT_EOC/ADC_IT_EOS only if bit */ + /* ADSTART==0 (no conversion on going) */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Disable ADC end of single conversion interrupt on group regular */ + /* Note: Overrun interrupt was enabled with EOC interrupt in */ + /* HAL_Start_IT(), but is not disabled here because can be used */ + /* by overrun IRQ process below. */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC | ADC_IT_EOS); + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + else + { + /* Change ADC state to error state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + } + + /* Conversion complete callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ConvCpltCallback(hadc); +#else + HAL_ADC_ConvCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + else /* DMA and-or internal error occurred */ + { + if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) != 0UL) + { + /* Call HAL ADC Error Callback function */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ErrorCallback(hadc); +#else + HAL_ADC_ErrorCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + else + { + /* Call ADC DMA error callback */ + hadc->DMA_Handle->XferErrorCallback(hdma); + } + } +} + +/** + * @brief DMA half transfer complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Half conversion callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ConvHalfCpltCallback(hadc); +#else + HAL_ADC_ConvHalfCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA error callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void ADC_DMAError(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA); + + /* Set ADC error code to DMA error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_DMA); + + /* Error callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ErrorCallback(hadc); +#else + HAL_ADC_ErrorCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +} + +/** + * @} + */ + +#endif /* HAL_ADC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc_ex.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc_ex.c new file mode 100644 index 0000000..35a5121 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc_ex.c @@ -0,0 +1,409 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_adc_ex.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the following + * functionalities of the Analog to Digital Converter (ADC) + * peripheral: + * + Peripheral Control functions + * Other functions (generic functions) are available in file + * "stm32g0xx_hal_adc.c". + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + [..] + (@) Sections "ADC peripheral features" and "How to use this driver" are + available in file of generic functions "stm32g0xx_hal_adc.c". + [..] + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup ADCEx ADCEx + * @brief ADC Extended HAL module driver + * @{ + */ + +#ifdef HAL_ADC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup ADCEx_Private_Constants ADC Extended Private Constants + * @{ + */ + +/* Fixed timeout value for ADC calibration. */ +/* Values defined to be higher than worst cases: maximum ratio between ADC */ +/* and CPU clock frequencies. */ +/* Example of profile low frequency : ADC frequency at 31.25kHz (ADC clock */ +/* source PLL 8MHz, ADC clock prescaler 256), CPU frequency 52MHz. */ +/* Calibration time max = 116 / fADC (refer to datasheet) */ +/* = 193 024 CPU cycles */ +#define ADC_CALIBRATION_TIMEOUT (193024UL) /*!< ADC calibration time-out value (unit: CPU cycles) */ +#define ADC_DISABLE_TIMEOUT (2UL) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup ADCEx_Exported_Functions ADC Extended Exported Functions + * @{ + */ + +/** @defgroup ADCEx_Exported_Functions_Group1 Extended Input and Output operation functions + * @brief Extended IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + + (+) Perform the ADC self-calibration. + (+) Get calibration factors. + (+) Set calibration factors. + +@endverbatim + * @{ + */ + +/** + * @brief Perform an ADC automatic self-calibration + * Calibration prerequisite: ADC must be disabled (execute this + * function before HAL_ADC_Start() or after HAL_ADC_Stop() ). + * @note Calibration factor can be read after calibration, using function + * HAL_ADC_GetValue() (value on 7 bits: from DR[6;0]). + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + __IO uint32_t wait_loop_index = 0UL; + uint32_t backup_setting_cfgr1; + uint32_t calibration_index; + uint32_t calibration_factor_accumulated = 0; + uint32_t tickstart; + uint32_t adc_clk_async_presc; + __IO uint32_t delay_cpu_cycles; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + __HAL_LOCK(hadc); + + /* Calibration prerequisite: ADC must be disabled. */ + + /* Disable the ADC (if not already disabled) */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_BUSY_INTERNAL); + + /* Manage settings impacting calibration */ + /* - Disable ADC mode auto power-off */ + /* - Disable ADC DMA transfer request during calibration */ + /* Note: Specificity of this STM32 series: Calibration factor is */ + /* available in data register and also transferred by DMA. */ + /* To not insert ADC calibration factor among ADC conversion data */ + /* in array variable, DMA transfer must be disabled during */ + /* calibration. */ + backup_setting_cfgr1 = READ_BIT(hadc->Instance->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG | ADC_CFGR1_AUTOFF); + CLEAR_BIT(hadc->Instance->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG | ADC_CFGR1_AUTOFF); + + /* ADC calibration procedure */ + /* Note: Perform an averaging of 8 calibrations for optimized accuracy */ + for (calibration_index = 0UL; calibration_index < 8UL; calibration_index++) + { + /* Start ADC calibration */ + LL_ADC_StartCalibration(hadc->Instance); + + /* Wait for calibration completion */ + while (LL_ADC_IsCalibrationOnGoing(hadc->Instance) != 0UL) + { + wait_loop_index++; + if (wait_loop_index >= ADC_CALIBRATION_TIMEOUT) + { + /* Update ADC state machine to error */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_ERROR_INTERNAL); + + __HAL_UNLOCK(hadc); + + return HAL_ERROR; + } + } + + calibration_factor_accumulated += LL_ADC_GetCalibrationFactor(hadc->Instance); + } + /* Compute average */ + calibration_factor_accumulated /= calibration_index; + + /* Apply calibration factor (requires ADC enable and disable process) */ + LL_ADC_Enable(hadc->Instance); + + /* Case of ADC clocked at low frequency: Delay required between ADC enable and disable actions */ + if (LL_ADC_GetClock(hadc->Instance) == LL_ADC_CLOCK_ASYNC) + { + adc_clk_async_presc = LL_ADC_GetCommonClock(__LL_ADC_COMMON_INSTANCE(hadc->Instance)); + + if (adc_clk_async_presc >= LL_ADC_CLOCK_ASYNC_DIV16) + { + /* Delay loop initialization and execution */ + /* Delay depends on ADC clock prescaler: Compute ADC clock asynchronous prescaler to decimal format */ + delay_cpu_cycles = (1UL << ((adc_clk_async_presc >> ADC_CCR_PRESC_Pos) - 3UL)); + /* Divide variable by 2 to compensate partially CPU processing cycles */ + delay_cpu_cycles >>= 1UL; + + while (delay_cpu_cycles != 0UL) + { + delay_cpu_cycles--; + } + } + } + + LL_ADC_SetCalibrationFactor(hadc->Instance, calibration_factor_accumulated); + LL_ADC_Disable(hadc->Instance); + + /* Wait for ADC effectively disabled before changing configuration */ + /* Get tick count */ + tickstart = HAL_GetTick(); + + while (LL_ADC_IsEnabled(hadc->Instance) != 0UL) + { + if ((HAL_GetTick() - tickstart) > ADC_DISABLE_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if (LL_ADC_IsEnabled(hadc->Instance) != 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + } + } + + /* Restore configuration after calibration */ + SET_BIT(hadc->Instance->CFGR1, backup_setting_cfgr1); + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_READY); + } + else + { + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Note: No need to update variable "tmp_hal_status" here: already set */ + /* to state "HAL_ERROR" by function disabling the ADC. */ + } + + __HAL_UNLOCK(hadc); + + return tmp_hal_status; +} + +/** + * @brief Get the calibration factor. + * @param hadc ADC handle. + * @retval Calibration value. + */ +uint32_t HAL_ADCEx_Calibration_GetValue(const ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Return the selected ADC calibration value */ + return ((hadc->Instance->CALFACT) & 0x0000007FU); +} + +/** + * @brief Set the calibration factor to overwrite automatic conversion result. + * ADC must be enabled and no conversion is ongoing. + * @param hadc ADC handle + * @param CalibrationFactor Calibration factor (coded on 7 bits maximum) + * @retval HAL state + */ +HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32_t CalibrationFactor) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmp_adc_is_conversion_on_going_regular; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_CALFACT(CalibrationFactor)); + + __HAL_LOCK(hadc); + + /* Verification of hardware constraints before modifying the calibration */ + /* factors register: ADC must be enabled, no conversion on going. */ + tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance); + + if ((LL_ADC_IsEnabled(hadc->Instance) != 0UL) + && (tmp_adc_is_conversion_on_going_regular == 0UL) + ) + { + hadc->Instance->CALFACT &= ~ADC_CALFACT_CALFACT; + hadc->Instance->CALFACT |= CalibrationFactor; + } + else + { + /* Update ADC state machine */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + /* Update ADC error code */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + /* Update ADC state machine to error */ + tmp_hal_status = HAL_ERROR; + } + + __HAL_UNLOCK(hadc); + + return tmp_hal_status; +} + +/** + * @brief Analog watchdog 2 callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADCEx_LevelOutOfWindow2Callback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADCEx_LevelOutOfWindow2Callback must be implemented in the user file. + */ +} + +/** + * @brief Analog watchdog 3 callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADCEx_LevelOutOfWindow3Callback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADCEx_LevelOutOfWindow3Callback must be implemented in the user file. + */ +} + + +/** + * @brief End Of Sampling callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADCEx_EndOfSamplingCallback must be implemented in the user file. + */ +} + +/** + * @brief ADC channel configuration ready callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADCEx_ChannelConfigReadyCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADCEx_ChannelConfigReadyCallback must be implemented in the user file. + */ +} + +/** + * @} + */ + +/** + * @brief Disable ADC voltage regulator. + * @note Disabling voltage regulator allows to save power. This operation can + * be carried out only when ADC is disabled. + * @note To enable again the voltage regulator, the user is expected to + * resort to HAL_ADC_Init() API. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Setting of this feature is conditioned to ADC state: ADC must be ADC disabled */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + LL_ADC_DisableInternalRegulator(hadc->Instance); + tmp_hal_status = HAL_OK; + } + else + { + tmp_hal_status = HAL_ERROR; + } + + return tmp_hal_status; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_ADC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c new file mode 100644 index 0000000..aafab80 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c @@ -0,0 +1,443 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_cortex.c + * @author MCD Application Team + * @brief CORTEX HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the CORTEX: + * + Initialization and Configuration functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + *** How to configure Interrupts using CORTEX HAL driver *** + =========================================================== + [..] + This section provides functions allowing to configure the NVIC interrupts (IRQ). + The Cortex M0+ exceptions are managed by CMSIS functions. + (#) Enable and Configure the priority of the selected IRQ Channels. + The priority can be 0..3. + + -@- Lower priority values gives higher priority. + -@- Priority Order: + (#@) Lowest priority. + (#@) Lowest hardware priority (IRQn position). + + (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority() + + (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ() + + -@- Negative value of IRQn_Type are not allowed. + + *** How to configure Systick using CORTEX HAL driver *** + ======================================================== + [..] + Setup SysTick Timer for time base. + + (+) The HAL_SYSTICK_Config()function calls the SysTick_Config() function which + is a CMSIS function that: + (++) Configures the SysTick Reload register with value passed as function parameter. + (++) Configures the SysTick IRQ priority to the lowest value (0x03). + (++) Resets the SysTick Counter register. + (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK). + (++) Enables the SysTick Interrupt. + (++) Starts the SysTick Counter. + + (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro + __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the + HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined + inside the stm32g0xx_hal_cortex.h file. + + (+) You can change the SysTick IRQ priority by calling the + HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function + call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function. + + (+) To adjust the SysTick time base, use the following formula: + + Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s) + (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function + (++) Reload Value should not exceed 0xFFFFFF + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup CORTEX + * @{ + */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup CORTEX_Exported_Functions + * @{ + */ + + +/** @addtogroup CORTEX_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This section provides the CORTEX HAL driver functions allowing to configure Interrupts + Systick functionalities + +@endverbatim + * @{ + */ + +/** + * @brief Sets the priority of an interrupt. + * @param IRQn External interrupt number . + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to stm32g0xx.h file) + * @param PreemptPriority The preemption priority for the IRQn channel. + * This parameter can be a value between 0 and 3. + * A lower priority value indicates a higher priority + * @param SubPriority the subpriority level for the IRQ channel. + * with stm32g0xx devices, this parameter is a dummy value and it is ignored, because + * no subpriority supported in Cortex M0+ based products. + * @retval None + */ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(SubPriority); + + /* Check the parameters */ + assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); + NVIC_SetPriority(IRQn, PreemptPriority); +} + +/** + * @brief Enable a device specific interrupt in the NVIC interrupt controller. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h)) + * @retval None + */ +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Enable interrupt */ + NVIC_EnableIRQ(IRQn); +} + +/** + * @brief Disable a device specific interrupt in the NVIC interrupt controller. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h)) + * @retval None + */ +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Disable interrupt */ + NVIC_DisableIRQ(IRQn); +} + +/** + * @brief Initiate a system reset request to reset the MCU. + * @retval None + */ +void HAL_NVIC_SystemReset(void) +{ + /* System Reset */ + NVIC_SystemReset(); +} + +/** + * @brief Initialize the System Timer with interrupt enabled and start the System Tick Timer (SysTick): + * Counter is in free running mode to generate periodic interrupts. + * @param TicksNumb Specifies the ticks Number of ticks between two interrupts. + * @retval status: - 0 Function succeeded. + * - 1 Function failed. + */ +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) +{ + return SysTick_Config(TicksNumb); +} +/** + * @} + */ + +/** @addtogroup CORTEX_Exported_Functions_Group2 + * @brief Cortex control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the CORTEX + (NVIC, SYSTICK, MPU) functionalities. + + +@endverbatim + * @{ + */ + +/** + * @brief Get the priority of an interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h)) + * @retval None + */ +uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn) +{ + /* Get priority for Cortex-M system or device specific interrupts */ + return NVIC_GetPriority(IRQn); +} + +/** + * @brief Set Pending bit of an external interrupt. + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h)) + * @retval None + */ +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Set interrupt pending */ + NVIC_SetPendingIRQ(IRQn); +} + +/** + * @brief Get Pending Interrupt (read the pending register in the NVIC + * and return the pending bit for the specified interrupt). + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h)) + * @retval status: - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Return 1 if pending else 0 */ + return NVIC_GetPendingIRQ(IRQn); +} + +/** + * @brief Clear the pending bit of an external interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32g0xxxx.h)) + * @retval None + */ +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Clear pending interrupt */ + NVIC_ClearPendingIRQ(IRQn); +} + +/** + * @brief Configure the SysTick clock source. + * @param CLKSource specifies the SysTick clock source. + * This parameter can be one of the following values: + * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source. + * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source. + * @retval None + */ +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource) +{ + /* Check the parameters */ + assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource)); + if (CLKSource == SYSTICK_CLKSOURCE_HCLK) + { + SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; + } + else + { + SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; + } +} + +/** + * @brief Handle SYSTICK interrupt request. + * @retval None + */ +void HAL_SYSTICK_IRQHandler(void) +{ + HAL_SYSTICK_Callback(); +} + +/** + * @brief SYSTICK callback. + * @retval None + */ +__weak void HAL_SYSTICK_Callback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SYSTICK_Callback could be implemented in the user file + */ +} + +#if (__MPU_PRESENT == 1U) +/** + * @brief Enable the MPU. + * @param MPU_Control Specifies the control mode of the MPU during hard fault, + * NMI, FAULTMASK and privileged access to the default memory + * This parameter can be one of the following values: + * @arg MPU_HFNMI_PRIVDEF_NONE + * @arg MPU_HARDFAULT_NMI + * @arg MPU_PRIVILEGED_DEFAULT + * @arg MPU_HFNMI_PRIVDEF + * @retval None + */ +void HAL_MPU_Enable(uint32_t MPU_Control) +{ + /* Enable the MPU */ + MPU->CTRL = (MPU_Control | MPU_CTRL_ENABLE_Msk); + + /* Ensure MPU setting take effects */ + __DSB(); + __ISB(); +} + + +/** + * @brief Disable the MPU. + * @retval None + */ +void HAL_MPU_Disable(void) +{ + /* Make sure outstanding transfers are done */ + __DMB(); + + /* Disable the MPU and clear the control register*/ + MPU->CTRL = 0; +} + +/** + * @brief Enable the MPU Region. + * @retval None + */ +void HAL_MPU_EnableRegion(uint32_t RegionNumber) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(RegionNumber)); + + /* Set the Region number */ + MPU->RNR = RegionNumber; + + /* Enable the Region */ + SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @brief Disable the MPU Region. + * @retval None + */ +void HAL_MPU_DisableRegion(uint32_t RegionNumber) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(RegionNumber)); + + /* Set the Region number */ + MPU->RNR = RegionNumber; + + /* Disable the Region */ + CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @brief Initialize and configure the Region and the memory to be protected. + * @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains + * the initialization and configuration information. + * @retval None + */ +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number)); + assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable)); + assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec)); + assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission)); + assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField)); + assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable)); + assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable)); + assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable)); + assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable)); + assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size)); + /* Set the Region number */ + MPU->RNR = MPU_Init->Number; + + /* Disable the Region */ + CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); + + /* Apply configuration */ + MPU->RBAR = MPU_Init->BaseAddress; + MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) | + ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) | + ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) | + ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) | + ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) | + ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) | + ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) | + ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) | + ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos); + +} +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CORTEX_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_crc.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_crc.c new file mode 100644 index 0000000..d170c8b --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_crc.c @@ -0,0 +1,516 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_crc.c + * @author MCD Application Team + * @brief CRC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Cyclic Redundancy Check (CRC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + (+) Enable CRC AHB clock using __HAL_RCC_CRC_CLK_ENABLE(); + (+) Initialize CRC calculator + (++) specify generating polynomial (peripheral default or non-default one) + (++) specify initialization value (peripheral default or non-default one) + (++) specify input data format + (++) specify input or output data inversion mode if any + (+) Use HAL_CRC_Accumulate() function to compute the CRC value of the + input data buffer starting with the previously computed CRC as + initialization value + (+) Use HAL_CRC_Calculate() function to compute the CRC value of the + input data buffer starting with the defined initialization value + (default or non-default) to initiate CRC calculation + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup CRC CRC + * @brief CRC HAL module driver. + * @{ + */ + +#ifdef HAL_CRC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup CRC_Private_Functions CRC Private Functions + * @{ + */ +static uint32_t CRC_Handle_8(CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength); +static uint32_t CRC_Handle_16(CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup CRC_Exported_Functions CRC Exported Functions + * @{ + */ + +/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions. + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the CRC according to the specified parameters + in the CRC_InitTypeDef and create the associated handle + (+) DeInitialize the CRC peripheral + (+) Initialize the CRC MSP (MCU Specific Package) + (+) DeInitialize the CRC MSP + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the CRC according to the specified + * parameters in the CRC_InitTypeDef and create the associated handle. + * @param hcrc CRC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc) +{ + /* Check the CRC handle allocation */ + if (hcrc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance)); + + if (hcrc->State == HAL_CRC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcrc->Lock = HAL_UNLOCKED; + /* Init the low level hardware */ + HAL_CRC_MspInit(hcrc); + } + + hcrc->State = HAL_CRC_STATE_BUSY; + + /* check whether or not non-default generating polynomial has been + * picked up by user */ + assert_param(IS_DEFAULT_POLYNOMIAL(hcrc->Init.DefaultPolynomialUse)); + if (hcrc->Init.DefaultPolynomialUse == DEFAULT_POLYNOMIAL_ENABLE) + { + /* initialize peripheral with default generating polynomial */ + WRITE_REG(hcrc->Instance->POL, DEFAULT_CRC32_POLY); + MODIFY_REG(hcrc->Instance->CR, CRC_CR_POLYSIZE, CRC_POLYLENGTH_32B); + } + else + { + /* initialize CRC peripheral with generating polynomial defined by user */ + if (HAL_CRCEx_Polynomial_Set(hcrc, hcrc->Init.GeneratingPolynomial, hcrc->Init.CRCLength) != HAL_OK) + { + return HAL_ERROR; + } + } + + /* check whether or not non-default CRC initial value has been + * picked up by user */ + assert_param(IS_DEFAULT_INIT_VALUE(hcrc->Init.DefaultInitValueUse)); + if (hcrc->Init.DefaultInitValueUse == DEFAULT_INIT_VALUE_ENABLE) + { + WRITE_REG(hcrc->Instance->INIT, DEFAULT_CRC_INITVALUE); + } + else + { + WRITE_REG(hcrc->Instance->INIT, hcrc->Init.InitValue); + } + + + /* set input data inversion mode */ + assert_param(IS_CRC_INPUTDATA_INVERSION_MODE(hcrc->Init.InputDataInversionMode)); + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_IN, hcrc->Init.InputDataInversionMode); + + /* set output data inversion mode */ + assert_param(IS_CRC_OUTPUTDATA_INVERSION_MODE(hcrc->Init.OutputDataInversionMode)); + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_OUT, hcrc->Init.OutputDataInversionMode); + + /* makes sure the input data format (bytes, halfwords or words stream) + * is properly specified by user */ + assert_param(IS_CRC_INPUTDATA_FORMAT(hcrc->InputDataFormat)); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief DeInitialize the CRC peripheral. + * @param hcrc CRC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc) +{ + /* Check the CRC handle allocation */ + if (hcrc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance)); + + /* Check the CRC peripheral state */ + if (hcrc->State == HAL_CRC_STATE_BUSY) + { + return HAL_BUSY; + } + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* Reset CRC calculation unit */ + __HAL_CRC_DR_RESET(hcrc); + + /* Reset IDR register content */ + CLEAR_REG(hcrc->Instance->IDR); + + /* DeInit the low level hardware */ + HAL_CRC_MspDeInit(hcrc); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_RESET; + + /* Process unlocked */ + __HAL_UNLOCK(hcrc); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the CRC MSP. + * @param hcrc CRC handle + * @retval None + */ +__weak void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcrc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CRC_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the CRC MSP. + * @param hcrc CRC handle + * @retval None + */ +__weak void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcrc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CRC_MspDeInit can be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions + * @brief management functions. + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer + using combination of the previous CRC value and the new one. + + [..] or + + (+) compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer + independently of the previous CRC value. + +@endverbatim + * @{ + */ + +/** + * @brief Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer + * starting with the previously computed CRC as initialization value. + * @param hcrc CRC handle + * @param pBuffer pointer to the input data buffer, exact input data format is + * provided by hcrc->InputDataFormat. + * @param BufferLength input data buffer length (number of bytes if pBuffer + * type is * uint8_t, number of half-words if pBuffer type is * uint16_t, + * number of words if pBuffer type is * uint32_t). + * @note By default, the API expects a uint32_t pointer as input buffer parameter. + * Input buffer pointers with other types simply need to be cast in uint32_t + * and the API will internally adjust its input data processing based on the + * handle field hcrc->InputDataFormat. + * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) + */ +uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) +{ + uint32_t index; /* CRC input data buffer index */ + uint32_t temp = 0U; /* CRC output (read from hcrc->Instance->DR register) */ + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + switch (hcrc->InputDataFormat) + { + case CRC_INPUTDATA_FORMAT_WORDS: + /* Enter Data to the CRC calculator */ + for (index = 0U; index < BufferLength; index++) + { + hcrc->Instance->DR = pBuffer[index]; + } + temp = hcrc->Instance->DR; + break; + + case CRC_INPUTDATA_FORMAT_BYTES: + temp = CRC_Handle_8(hcrc, (uint8_t *)pBuffer, BufferLength); + break; + + case CRC_INPUTDATA_FORMAT_HALFWORDS: + temp = CRC_Handle_16(hcrc, (uint16_t *)(void *)pBuffer, BufferLength); /* Derogation MisraC2012 R.11.5 */ + break; + default: + break; + } + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return the CRC computed value */ + return temp; +} + +/** + * @brief Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer + * starting with hcrc->Instance->INIT as initialization value. + * @param hcrc CRC handle + * @param pBuffer pointer to the input data buffer, exact input data format is + * provided by hcrc->InputDataFormat. + * @param BufferLength input data buffer length (number of bytes if pBuffer + * type is * uint8_t, number of half-words if pBuffer type is * uint16_t, + * number of words if pBuffer type is * uint32_t). + * @note By default, the API expects a uint32_t pointer as input buffer parameter. + * Input buffer pointers with other types simply need to be cast in uint32_t + * and the API will internally adjust its input data processing based on the + * handle field hcrc->InputDataFormat. + * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) + */ +uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) +{ + uint32_t index; /* CRC input data buffer index */ + uint32_t temp = 0U; /* CRC output (read from hcrc->Instance->DR register) */ + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* Reset CRC Calculation Unit (hcrc->Instance->INIT is + * written in hcrc->Instance->DR) */ + __HAL_CRC_DR_RESET(hcrc); + + switch (hcrc->InputDataFormat) + { + case CRC_INPUTDATA_FORMAT_WORDS: + /* Enter 32-bit input data to the CRC calculator */ + for (index = 0U; index < BufferLength; index++) + { + hcrc->Instance->DR = pBuffer[index]; + } + temp = hcrc->Instance->DR; + break; + + case CRC_INPUTDATA_FORMAT_BYTES: + /* Specific 8-bit input data handling */ + temp = CRC_Handle_8(hcrc, (uint8_t *)pBuffer, BufferLength); + break; + + case CRC_INPUTDATA_FORMAT_HALFWORDS: + /* Specific 16-bit input data handling */ + temp = CRC_Handle_16(hcrc, (uint16_t *)(void *)pBuffer, BufferLength); /* Derogation MisraC2012 R.11.5 */ + break; + + default: + break; + } + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return the CRC computed value */ + return temp; +} + +/** + * @} + */ + +/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions + * @brief Peripheral State functions. + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Return the CRC handle state. + * @param hcrc CRC handle + * @retval HAL state + */ +HAL_CRC_StateTypeDef HAL_CRC_GetState(const CRC_HandleTypeDef *hcrc) +{ + /* Return CRC handle state */ + return hcrc->State; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup CRC_Private_Functions + * @{ + */ + +/** + * @brief Enter 8-bit input data to the CRC calculator. + * Specific data handling to optimize processing time. + * @param hcrc CRC handle + * @param pBuffer pointer to the input data buffer + * @param BufferLength input data buffer length + * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) + */ +static uint32_t CRC_Handle_8(CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength) +{ + uint32_t i; /* input data buffer index */ + uint16_t data; + __IO uint16_t *pReg; + + /* Processing time optimization: 4 bytes are entered in a row with a single word write, + * last bytes must be carefully fed to the CRC calculator to ensure a correct type + * handling by the peripheral */ + for (i = 0U; i < (BufferLength / 4U); i++) + { + hcrc->Instance->DR = ((uint32_t)pBuffer[4U * i] << 24U) | \ + ((uint32_t)pBuffer[(4U * i) + 1U] << 16U) | \ + ((uint32_t)pBuffer[(4U * i) + 2U] << 8U) | \ + (uint32_t)pBuffer[(4U * i) + 3U]; + } + /* last bytes specific handling */ + if ((BufferLength % 4U) != 0U) + { + if ((BufferLength % 4U) == 1U) + { + *(__IO uint8_t *)(__IO void *)(&hcrc->Instance->DR) = pBuffer[4U * i]; /* Derogation MisraC2012 R.11.5 */ + } + if ((BufferLength % 4U) == 2U) + { + data = ((uint16_t)(pBuffer[4U * i]) << 8U) | (uint16_t)pBuffer[(4U * i) + 1U]; + pReg = (__IO uint16_t *)(__IO void *)(&hcrc->Instance->DR); /* Derogation MisraC2012 R.11.5 */ + *pReg = data; + } + if ((BufferLength % 4U) == 3U) + { + data = ((uint16_t)(pBuffer[4U * i]) << 8U) | (uint16_t)pBuffer[(4U * i) + 1U]; + pReg = (__IO uint16_t *)(__IO void *)(&hcrc->Instance->DR); /* Derogation MisraC2012 R.11.5 */ + *pReg = data; + + *(__IO uint8_t *)(__IO void *)(&hcrc->Instance->DR) = pBuffer[(4U * i) + 2U]; /* Derogation MisraC2012 R.11.5 */ + } + } + + /* Return the CRC computed value */ + return hcrc->Instance->DR; +} + +/** + * @brief Enter 16-bit input data to the CRC calculator. + * Specific data handling to optimize processing time. + * @param hcrc CRC handle + * @param pBuffer pointer to the input data buffer + * @param BufferLength input data buffer length + * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) + */ +static uint32_t CRC_Handle_16(CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength) +{ + uint32_t i; /* input data buffer index */ + __IO uint16_t *pReg; + + /* Processing time optimization: 2 HalfWords are entered in a row with a single word write, + * in case of odd length, last HalfWord must be carefully fed to the CRC calculator to ensure + * a correct type handling by the peripheral */ + for (i = 0U; i < (BufferLength / 2U); i++) + { + hcrc->Instance->DR = ((uint32_t)pBuffer[2U * i] << 16U) | (uint32_t)pBuffer[(2U * i) + 1U]; + } + if ((BufferLength % 2U) != 0U) + { + pReg = (__IO uint16_t *)(__IO void *)(&hcrc->Instance->DR); /* Derogation MisraC2012 R.11.5 */ + *pReg = pBuffer[2U * i]; + } + + /* Return the CRC computed value */ + return hcrc->Instance->DR; +} + +/** + * @} + */ + +#endif /* HAL_CRC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_crc_ex.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_crc_ex.c new file mode 100644 index 0000000..37b78f4 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_crc_ex.c @@ -0,0 +1,232 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_crc_ex.c + * @author MCD Application Team + * @brief Extended CRC HAL module driver. + * This file provides firmware functions to manage the extended + * functionalities of the CRC peripheral. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim +================================================================================ + ##### How to use this driver ##### +================================================================================ + [..] + (+) Set user-defined generating polynomial through HAL_CRCEx_Polynomial_Set() + (+) Configure Input or Output data inversion + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup CRCEx CRCEx + * @brief CRC Extended HAL module driver + * @{ + */ + +#ifdef HAL_CRC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup CRCEx_Exported_Functions CRC Extended Exported Functions + * @{ + */ + +/** @defgroup CRCEx_Exported_Functions_Group1 Extended Initialization/de-initialization functions + * @brief Extended Initialization and Configuration functions. + * +@verbatim + =============================================================================== + ##### Extended configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the generating polynomial + (+) Configure the input data inversion + (+) Configure the output data inversion + +@endverbatim + * @{ + */ + + +/** + * @brief Initialize the CRC polynomial if different from default one. + * @param hcrc CRC handle + * @param Pol CRC generating polynomial (7, 8, 16 or 32-bit long). + * This parameter is written in normal representation, e.g. + * @arg for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 + * @arg for a polynomial of degree 16, X^16 + X^12 + X^5 + 1 is written 0x1021 + * @param PolyLength CRC polynomial length. + * This parameter can be one of the following values: + * @arg @ref CRC_POLYLENGTH_7B 7-bit long CRC (generating polynomial of degree 7) + * @arg @ref CRC_POLYLENGTH_8B 8-bit long CRC (generating polynomial of degree 8) + * @arg @ref CRC_POLYLENGTH_16B 16-bit long CRC (generating polynomial of degree 16) + * @arg @ref CRC_POLYLENGTH_32B 32-bit long CRC (generating polynomial of degree 32) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t msb = 31U; /* polynomial degree is 32 at most, so msb is initialized to max value */ + + /* Check the parameters */ + assert_param(IS_CRC_POL_LENGTH(PolyLength)); + + /* Ensure that the generating polynomial is odd */ + if ((Pol & (uint32_t)(0x1U)) == 0U) + { + status = HAL_ERROR; + } + else + { + /* check polynomial definition vs polynomial size: + * polynomial length must be aligned with polynomial + * definition. HAL_ERROR is reported if Pol degree is + * larger than that indicated by PolyLength. + * Look for MSB position: msb will contain the degree of + * the second to the largest polynomial member. E.g., for + * X^7 + X^6 + X^5 + X^2 + 1, msb = 6. */ + while ((msb-- > 0U) && ((Pol & ((uint32_t)(0x1U) << (msb & 0x1FU))) == 0U)) + { + } + + switch (PolyLength) + { + + case CRC_POLYLENGTH_7B: + if (msb >= HAL_CRC_LENGTH_7B) + { + status = HAL_ERROR; + } + break; + case CRC_POLYLENGTH_8B: + if (msb >= HAL_CRC_LENGTH_8B) + { + status = HAL_ERROR; + } + break; + case CRC_POLYLENGTH_16B: + if (msb >= HAL_CRC_LENGTH_16B) + { + status = HAL_ERROR; + } + break; + + case CRC_POLYLENGTH_32B: + /* no polynomial definition vs. polynomial length issue possible */ + break; + default: + status = HAL_ERROR; + break; + } + } + if (status == HAL_OK) + { + /* set generating polynomial */ + WRITE_REG(hcrc->Instance->POL, Pol); + + /* set generating polynomial size */ + MODIFY_REG(hcrc->Instance->CR, CRC_CR_POLYSIZE, PolyLength); + } + /* Return function status */ + return status; +} + +/** + * @brief Set the Reverse Input data mode. + * @param hcrc CRC handle + * @param InputReverseMode Input Data inversion mode. + * This parameter can be one of the following values: + * @arg @ref CRC_INPUTDATA_INVERSION_NONE no change in bit order (default value) + * @arg @ref CRC_INPUTDATA_INVERSION_BYTE Byte-wise bit reversal + * @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD HalfWord-wise bit reversal + * @arg @ref CRC_INPUTDATA_INVERSION_WORD Word-wise bit reversal + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode) +{ + /* Check the parameters */ + assert_param(IS_CRC_INPUTDATA_INVERSION_MODE(InputReverseMode)); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* set input data inversion mode */ + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_IN, InputReverseMode); + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Set the Reverse Output data mode. + * @param hcrc CRC handle + * @param OutputReverseMode Output Data inversion mode. + * This parameter can be one of the following values: + * @arg @ref CRC_OUTPUTDATA_INVERSION_DISABLE no CRC inversion (default value) + * @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE bit-level inversion (e.g. for a 8-bit CRC: 0xB5 becomes 0xAD) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode) +{ + /* Check the parameters */ + assert_param(IS_CRC_OUTPUTDATA_INVERSION_MODE(OutputReverseMode)); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* set output data inversion mode */ + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_OUT, OutputReverseMode); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + + + + +/** + * @} + */ + + +/** + * @} + */ + + +#endif /* HAL_CRC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma.c new file mode 100644 index 0000000..a2b906a --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma.c @@ -0,0 +1,1193 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_dma.c + * @author MCD Application Team + * @brief DMA HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Direct Memory Access (DMA) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable and configure the peripheral to be connected to the DMA Channel + (except for internal SRAM / FLASH memories: no initialization is + necessary). Please refer to the Reference manual for connection between peripherals + and DMA requests. + + (#) For a given Channel, program the required configuration through the following parameters: + Channel request, Transfer Direction, Source and Destination data formats, + Circular or Normal mode, Channel Priority level, Source and Destination Increment mode + using HAL_DMA_Init() function. + + Prior to HAL_DMA_Init the peripheral clock shall be enabled for both DMA & DMAMUX + thanks to: + (##) DMA1 or DMA2: __HAL_RCC_DMA1_CLK_ENABLE() or __HAL_RCC_DMA2_CLK_ENABLE(); + + (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error + detection. + + (#) Use HAL_DMA_Abort() function to abort the current transfer + + -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. + + *** Polling mode IO operation *** + ================================= + [..] + (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source + address and destination address and the Length of data to be transferred + (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this + case a fixed Timeout can be configured by User depending from his application. + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() + (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() + (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of + Source address and destination address and the Length of data to be transferred. + In this case the DMA interrupt is configured + (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine + (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can + add his own function to register callbacks with HAL_DMA_RegisterCallback(). + + *** DMA HAL driver macros list *** + ============================================= + [..] + Below the list of macros in DMA HAL driver. + + (+) __HAL_DMA_ENABLE: Enable the specified DMA Channel. + (+) __HAL_DMA_DISABLE: Disable the specified DMA Channel. + (+) __HAL_DMA_GET_FLAG: Get the DMA Channel pending flags. + (+) __HAL_DMA_CLEAR_FLAG: Clear the DMA Channel pending flags. + (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Channel interrupts. + (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Channel interrupts. + (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Channel interrupt is enabled or not. + + [..] + (@) You can refer to the DMA HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup DMA DMA + * @brief DMA HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup DMA_Private_Functions DMA Private Functions + * @{ + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma); +static void DMA_CalcDMAMUXRequestGenBaseAndMask(DMA_HandleTypeDef *hdma); + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to initialize the DMA Channel source + and destination addresses, incrementation and data sizes, transfer direction, + circular/normal mode selection, memory-to-memory mode selection and Channel priority value. + [..] + The HAL_DMA_Init() function follows the DMA configuration procedures as described in + reference manual. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DMA according to the specified + * parameters in the DMA_InitTypeDef and initialize the associated handle. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) +{ + /* Check the DMA handle allocation */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); + assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); + assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); + assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); + assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); + assert_param(IS_DMA_MODE(hdma->Init.Mode)); + assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); + + assert_param(IS_DMA_ALL_REQUEST(hdma->Init.Request)); + + /* Compute the channel index */ +#if defined(DMA2) + if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) + { + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA1; + } + else + { + /* DMA2 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA2; + } +#else + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; +#endif /* DMA2 */ + + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR and MEM2MEM bits */ + CLEAR_BIT(hdma->Instance->CCR, (DMA_CCR_PL | DMA_CCR_MSIZE | DMA_CCR_PSIZE | \ + DMA_CCR_MINC | DMA_CCR_PINC | DMA_CCR_CIRC | \ + DMA_CCR_DIR | DMA_CCR_MEM2MEM)); + + /* Set the DMA Channel configuration */ + SET_BIT(hdma->Instance->CCR, (hdma->Init.Direction | \ + hdma->Init.PeriphInc | hdma->Init.MemInc | \ + hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | \ + hdma->Init.Mode | hdma->Init.Priority)); + + /* Initialize parameters for DMAMUX channel : + DMAmuxChannel, DMAmuxChannelStatus and DMAmuxChannelStatusMask + */ + DMA_CalcDMAMUXChannelBaseAndMask(hdma); + + if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) + { + /* if memory to memory force the request to 0*/ + hdma->Init.Request = DMA_REQUEST_MEM2MEM; + } + + /* Set peripheral request to DMAMUX channel */ + hdma->DMAmuxChannel->CCR = (hdma->Init.Request & DMAMUX_CxCR_DMAREQ_ID); + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (((hdma->Init.Request > 0UL) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR3))) + { + /* Initialize parameters for DMAMUX request generator : + DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask + */ + DMA_CalcDMAMUXRequestGenBaseAndMask(hdma); + + /* Reset the DMAMUX request generator register*/ + hdma->DMAmuxRequestGen->RGCR = 0U; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + else + { + hdma->DMAmuxRequestGen = 0U; + hdma->DMAmuxRequestGenStatus = 0U; + hdma->DMAmuxRequestGenStatusMask = 0U; + } + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state*/ + hdma->State = HAL_DMA_STATE_READY; + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @brief DeInitialize the DMA peripheral. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) +{ + /* Check the DMA handle allocation */ + if (NULL == hdma) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* Disable the selected DMA Channelx */ + __HAL_DMA_DISABLE(hdma); + + /* Compute the channel index */ +#if defined(DMA2) + if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) + { + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA1; + } + else + { + /* DMA2 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA2; + } +#else + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; +#endif /* DMA2 */ + + /* Reset DMA Channel control register */ + hdma->Instance->CCR = 0U; + + /* Clear all flags */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); +#else + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_GI1 << (hdma->ChannelIndex & 0x1CU))); +#endif /* DMA2 */ + + /* Initialize parameters for DMAMUX channel : + DMAmuxChannel, DMAmuxChannelStatus and DMAmuxChannelStatusMask */ + + DMA_CalcDMAMUXChannelBaseAndMask(hdma); + + /* Reset the DMAMUX channel that corresponds to the DMA channel */ + hdma->DMAmuxChannel->CCR = 0U; + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Reset Request generator parameters if any */ + if (((hdma->Init.Request > 0UL) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR3))) + { + /* Initialize parameters for DMAMUX request generator : + DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask + */ + DMA_CalcDMAMUXRequestGenBaseAndMask(hdma); + + /* Reset the DMAMUX request generator register*/ + hdma->DMAmuxRequestGen->RGCR = 0U; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + + hdma->DMAmuxRequestGen = 0U; + hdma->DMAmuxRequestGenStatus = 0U; + hdma->DMAmuxRequestGenStatusMask = 0U; + + /* Clean callbacks */ + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state */ + hdma->State = HAL_DMA_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions + * @brief Input and Output operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the source, destination address and data length and Start DMA transfer + (+) Configure the source, destination address and data length and + Start DMA transfer with interrupt + (+) Abort DMA transfer + (+) Poll for transfer complete + (+) Handle DMA interrupt request + (+) Register and Unregister DMA callbacks + +@endverbatim + * @{ + */ + +/** + * @brief Start the DMA Transfer. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if (hdma->State == HAL_DMA_STATE_READY) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length & clear flags*/ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Change the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Start the DMA Transfer with interrupt enabled. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, + uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if (hdma->State == HAL_DMA_STATE_READY) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length & clear flags*/ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the transfer complete interrupt */ + /* Enable the transfer Error interrupt */ + if (NULL != hdma->XferHalfCpltCallback) + { + /* Enable the Half transfer complete interrupt as well */ + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + } + else + { + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_TE)); + } + + /* Check if DMAMUX Synchronization is enabled*/ + if ((hdma->DMAmuxChannel->CCR & DMAMUX_CxCR_SE) != 0U) + { + /* Enable DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR |= DMAMUX_CxCR_SOIE; + } + + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, enable the DMAMUX request generator overrun IT*/ + /* enable the request gen overrun IT*/ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE; + } + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Change the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Abort the DMA Transfer. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) +{ + /* Check the DMA peripheral handle */ + if (NULL == hdma) + { + return HAL_ERROR; + } + + /* Check the DMA peripheral state */ + if (hdma->State != HAL_DMA_STATE_BUSY) + { + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + else + { + /* Disable DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* disable the DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + + /* Clear all flags */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); +#else + __HAL_DMA_CLEAR_FLAG(hdma, ((DMA_FLAG_GI1) << (hdma->ChannelIndex & 0x1CU))); +#endif /* DMA2 */ + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT*/ + /* disable the request gen overrun IT*/ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + } + + return HAL_OK; +} + +/** + * @brief Aborts the DMA Transfer in Interrupt mode. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hdma->State != HAL_DMA_STATE_BUSY) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + status = HAL_ERROR; + } + else + { + /* Disable DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + + /* disable the DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + + /* Clear all flags */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); +#else + __HAL_DMA_CLEAR_FLAG(hdma, ((DMA_FLAG_GI1) << (hdma->ChannelIndex & 0x1CU))); +#endif /* DMA2 */ + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT*/ + /* disable the request gen overrun IT*/ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Call User Abort callback */ + if (hdma->XferAbortCallback != NULL) + { + hdma->XferAbortCallback(hdma); + } + } + return status; +} + +/** + * @brief Polling for transfer complete. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CompleteLevel Specifies the DMA level complete. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, + uint32_t Timeout) +{ + uint32_t temp; + uint32_t tickstart; + + if (hdma->State != HAL_DMA_STATE_BUSY) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + __HAL_UNLOCK(hdma); + return HAL_ERROR; + } + + /* Polling mode not supported in circular mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != 0U) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + /* Get the level transfer complete flag */ + if (HAL_DMA_FULL_TRANSFER == CompleteLevel) + { + /* Transfer Complete flag */ + temp = DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU); + } + else + { + /* Half Transfer Complete flag */ + temp = DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU); + } + + /* Get tick */ + tickstart = HAL_GetTick(); + +#if defined(DMA2) + while ((hdma->DmaBaseAddress->ISR & temp) == 0U) + { + if ((hdma->DmaBaseAddress->ISR & (DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x1CU))) != 0U) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } +#else + while (0U == __HAL_DMA_GET_FLAG(hdma, temp)) + { + if (0U != __HAL_DMA_GET_FLAG(hdma, (DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x1CU)))) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Clear all flags */ + __HAL_DMA_CLEAR_FLAG(hdma, ((DMA_FLAG_GI1) << (hdma->ChannelIndex & 0x1CU))); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } +#endif /* DMA2 */ + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + } + } + + /*Check for DMAMUX Request generator (if used) overrun status */ + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator Check for DMAMUX request generator overrun */ + if ((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U) + { + /* Disable the request gen overrun interrupt */ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN; + } + } + + /* Check for DMAMUX Synchronization overrun */ + if ((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U) + { + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_SYNC; + } + + if (HAL_DMA_FULL_TRANSFER == CompleteLevel) + { + /* Clear the transfer complete flag */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU)); +#else + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU))); +#endif /* DMA2 */ + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + /* The selected Channelx EN bit is cleared (DMA is disabled and + all transfers are complete) */ + hdma->State = HAL_DMA_STATE_READY; + } + else + { + /* Clear the half transfer complete flag */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU)); +#else + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU))); +#endif /* DMA2 */ + } + + return HAL_OK; +} + +/** + * @brief Handle DMA interrupt request. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) +{ +#if defined(DMA2) + uint32_t flag_it = hdma->DmaBaseAddress->ISR; +#else + uint32_t flag_it = DMA1->ISR; +#endif /* DMA2 */ + uint32_t source_it = hdma->Instance->CCR; + + /* Half Transfer Complete Interrupt management ******************************/ + if (((flag_it & (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU))) != 0U) && ((source_it & DMA_IT_HT) != 0U)) + { + /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the half transfer interrupt */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + } + /* Clear the half transfer complete flag */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = DMA_ISR_HTIF1 << (hdma->ChannelIndex & 0x1CU); +#else + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU))); +#endif /* DMA2 */ + + /* DMA peripheral state is not updated in Half Transfer */ + /* but in Transfer Complete case */ + + if (hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } + } + + /* Transfer Complete Interrupt management ***********************************/ + else if ((0U != (flag_it & (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU)))) && (0U != (source_it & DMA_IT_TC))) + { + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the transfer complete and error interrupt */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE | DMA_IT_TC); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + } + /* Clear the transfer complete flag */ + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU))); + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if (hdma->XferCpltCallback != NULL) + { + /* Transfer complete callback */ + hdma->XferCpltCallback(hdma); + } + } + + /* Transfer Error Interrupt management **************************************/ + else if (((flag_it & (DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x1CU))) != 0U) && ((source_it & DMA_IT_TE) != 0U)) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Disable ALL DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Clear all flags */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); +#else + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_GI1 << (hdma->ChannelIndex & 0x1CU))); +#endif /* DMA2 */ + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + else + { + /* Nothing To Do */ + } + return; +} + +/** + * @brief Register callbacks + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CallbackID User Callback identifier + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @param pCallback Pointer to private callback function which has pointer to + * a DMA_HandleTypeDef structure as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if (hdma->State == HAL_DMA_STATE_READY) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = pCallback; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = pCallback; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @brief UnRegister callbacks + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CallbackID User Callback identifier + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if (hdma->State == HAL_DMA_STATE_READY) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = NULL; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = NULL; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = NULL; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = NULL; + break; + + case HAL_DMA_XFER_ALL_CB_ID: + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @} + */ + + + +/** @defgroup DMA_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the DMA state + (+) Get error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the DMA handle state. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL state + */ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) +{ + /* Return DMA handle state */ + return hdma->State; +} + +/** + * @brief Return the DMA error code. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval DMA Error Code + */ +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) +{ + /* Return the DMA error code */ + return hdma->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DMA_Private_Functions + * @{ + */ + +/** + * @brief Sets the DMA Transfer parameter. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (hdma->DMAmuxRequestGen != 0U) + { + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + + /* Clear all flags */ +#if defined(DMA2) + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); +#else + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_GI1 << (hdma->ChannelIndex & 0x1CU))); +#endif /* DMA2 */ + + /* Configure DMA Channel data length */ + hdma->Instance->CNDTR = DataLength; + + /* Memory to Peripheral */ + if ((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Channel destination address */ + hdma->Instance->CPAR = DstAddress; + + /* Configure DMA Channel source address */ + hdma->Instance->CMAR = SrcAddress; + } + /* Peripheral to Memory */ + else + { + /* Configure DMA Channel source address */ + hdma->Instance->CPAR = SrcAddress; + + /* Configure DMA Channel destination address */ + hdma->Instance->CMAR = DstAddress; + } +} + +/** + * @brief Updates the DMA handle with the DMAMUX channel and status mask depending on channel number + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ +static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma) +{ + uint32_t channel_number; + +#if defined(DMA2) + /* check if instance is not outside the DMA channel range */ + if ((uint32_t)hdma->Instance < (uint32_t)DMA2_Channel1) + { + /* DMA1 */ + /* Associate a DMA Channel to a DMAMUX channel */ + hdma->DMAmuxChannel = (DMAMUX1_Channel0 + (hdma->ChannelIndex >> 2U)); + + /* Prepare channel_number used for DMAmuxChannelStatusMask computation */ + channel_number = (((uint32_t)hdma->Instance & 0xFFU) - 8U) / 20U; + } + else + { + /* DMA2 */ + /* Associate a DMA Channel to a DMAMUX channel */ + hdma->DMAmuxChannel = (DMAMUX1_Channel7 + (hdma->ChannelIndex >> 2U)); + + /* Prepare channel_number used for DMAmuxChannelStatusMask computation */ + channel_number = (((((uint32_t)hdma->Instance & 0xFFU) - 8U) / 20U) + 7U); + } +#else + /* Associate a DMA Channel to a DMAMUX channel */ + hdma->DMAmuxChannel = (DMAMUX_Channel_TypeDef *)(uint32_t)((uint32_t)DMAMUX1_Channel0 + ((hdma->ChannelIndex >> 2U) * ((uint32_t)DMAMUX1_Channel1 - (uint32_t)DMAMUX1_Channel0))); + + /* Prepare channel_number used for DMAmuxChannelStatusMask computation */ + channel_number = (((uint32_t)hdma->Instance & 0xFFU) - 8U) / 20U; +#endif /* DMA2 */ + + /* Initialize the field DMAmuxChannelStatus to DMAMUX1_ChannelStatus base */ + hdma->DMAmuxChannelStatus = DMAMUX1_ChannelStatus; + + /* Initialize the field DMAmuxChannelStatusMask with the corresponding index of the DMAMUX channel selected for the current ChannelIndex */ + hdma->DMAmuxChannelStatusMask = 1UL << (channel_number & 0x1FU); +} + +/** + * @brief Updates the DMA handle with the DMAMUX request generator params + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ + +static void DMA_CalcDMAMUXRequestGenBaseAndMask(DMA_HandleTypeDef *hdma) +{ + uint32_t request = hdma->Init.Request & DMAMUX_CxCR_DMAREQ_ID; + + /* DMA Channels are connected to DMAMUX1 request generator blocks*/ + hdma->DMAmuxRequestGen = (DMAMUX_RequestGen_TypeDef *)((uint32_t)(((uint32_t)DMAMUX1_RequestGenerator0) + ((request - 1U) * 4U))); + + hdma->DMAmuxRequestGenStatus = DMAMUX1_RequestGenStatus; + + /* here "Request" is either DMA_REQUEST_GENERATOR0 to DMA_REQUEST_GENERATOR3, i.e. <= 4*/ + hdma->DMAmuxRequestGenStatusMask = 1UL << ((request - 1U) & 0x3U); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma_ex.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma_ex.c new file mode 100644 index 0000000..28309c9 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma_ex.c @@ -0,0 +1,320 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_dma_ex.c + * @author MCD Application Team + * @brief DMA Extension HAL module driver + * This file provides firmware functions to manage the following + * functionalities of the DMA Extension peripheral: + * + Extended features functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The DMA Extension HAL driver can be used as follows: + (+) Configure the DMAMUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function. + (+) Configure the DMAMUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function. + Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used + to respectively enable/disable the request generator. + + (+) To handle the DMAMUX Interrupts, the function HAL_DMAEx_MUX_IRQHandler should be called from + the DMAMUX IRQ handler i.e DMAMUX1_OVR_IRQHandler. + As only one interrupt line is available for all DMAMUX channels and request generators , HAL_DMAEx_MUX_IRQHandler should be + called with, as parameter, the appropriate DMA handle as many as used DMAs in the user project + (exception done if a given DMA is not using the DMAMUX SYNC block neither a request generator) + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup DMAEx DMAEx + * @brief DMA Extended HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private Constants ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + + +/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions + * @{ + */ + +/** @defgroup DMAEx_Exported_Functions_Group1 DMAEx Extended features functions + * @brief Extended features functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + + (+) Configure the DMAMUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function. + (+) Configure the DMAMUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function. + Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used + to respectively enable/disable the request generator. + (+) Handle DMAMUX interrupts using HAL_DMAEx_MUX_IRQHandler : should be called from + the DMAMUX IRQ handler + +@endverbatim + * @{ + */ + +/** + * @brief Configure the DMAMUX synchronization parameters for a given DMA channel (instance). + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @param pSyncConfig Pointer to HAL_DMA_MuxSyncConfigTypeDef contains the DMAMUX synchronization parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + assert_param(IS_DMAMUX_SYNC_SIGNAL_ID(pSyncConfig->SyncSignalID)); + + assert_param(IS_DMAMUX_SYNC_POLARITY(pSyncConfig-> SyncPolarity)); + assert_param(IS_DMAMUX_SYNC_STATE(pSyncConfig->SyncEnable)); + assert_param(IS_DMAMUX_SYNC_EVENT(pSyncConfig->EventEnable)); + assert_param(IS_DMAMUX_SYNC_REQUEST_NUMBER(pSyncConfig->RequestNumber)); + + /*Check if the DMA state is ready */ + if (hdma->State == HAL_DMA_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hdma); + + /* Set the new synchronization parameters (and keep the request ID filled during the Init)*/ + MODIFY_REG(hdma->DMAmuxChannel->CCR, \ + (~DMAMUX_CxCR_DMAREQ_ID), \ + (pSyncConfig->SyncSignalID | ((pSyncConfig->RequestNumber - 1U) << DMAMUX_CxCR_NBREQ_Pos) | \ + pSyncConfig->SyncPolarity | ((uint32_t)pSyncConfig->SyncEnable << DMAMUX_CxCR_SE_Pos) | \ + ((uint32_t)pSyncConfig->EventEnable << DMAMUX_CxCR_EGE_Pos))); + + /* Process UnLocked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; + } + else + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Return error status */ + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMAMUX request generator block used by the given DMA channel (instance). + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @param pRequestGeneratorConfig Pointer to HAL_DMA_MuxRequestGeneratorConfigTypeDef + * contains the request generator parameters. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator(DMA_HandleTypeDef *hdma, + HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig) +{ + HAL_StatusTypeDef status; + HAL_DMA_StateTypeDef temp_state = hdma->State; + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + assert_param(IS_DMAMUX_REQUEST_GEN_SIGNAL_ID(pRequestGeneratorConfig->SignalID)); + + assert_param(IS_DMAMUX_REQUEST_GEN_POLARITY(pRequestGeneratorConfig->Polarity)); + assert_param(IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(pRequestGeneratorConfig->RequestNumber)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block + */ + if (hdma->DMAmuxRequestGen == 0U) + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_PARAM; + + /* error status */ + status = HAL_ERROR; + } + else if (((hdma->DMAmuxRequestGen->RGCR & DMAMUX_RGxCR_GE) == 0U) && (temp_state == HAL_DMA_STATE_READY)) + { + /* RequestGenerator must be disable prior to the configuration i.e GE bit is 0 */ + + /* Process Locked */ + __HAL_LOCK(hdma); + + /* Set the request generator new parameters*/ + hdma->DMAmuxRequestGen->RGCR = pRequestGeneratorConfig->SignalID | \ + ((pRequestGeneratorConfig->RequestNumber - 1U) << DMAMUX_RGxCR_GNBREQ_Pos) | \ + pRequestGeneratorConfig->Polarity; + /* Process UnLocked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; + } + else + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Enable the DMAMUX request generator block used by the given DMA channel (instance). + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator(DMA_HandleTypeDef *hdma) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block + */ + if ((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0)) + { + + /* Enable the request generator*/ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_GE; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Disable the DMAMUX request generator block used by the given DMA channel (instance). + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator(DMA_HandleTypeDef *hdma) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block + */ + if ((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0)) + { + + /* Disable the request generator*/ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_GE; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Handles DMAMUX interrupt request. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @retval None + */ +void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma) +{ + /* Check for DMAMUX Synchronization overrun */ + if ((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U) + { + /* Disable the synchro overrun interrupt */ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_SYNC; + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + + if (hdma->DMAmuxRequestGen != 0) + { + /* if using a DMAMUX request generator block Check for DMAMUX request generator overrun */ + if ((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U) + { + /* Disable the request gen overrun interrupt */ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN; + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + } +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_exti.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_exti.c new file mode 100644 index 0000000..35bba78 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_exti.c @@ -0,0 +1,670 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_exti.c + * @author MCD Application Team + * @brief EXTI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (EXTI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### EXTI Peripheral features ##### + ============================================================================== + [..] + (+) Each Exti line can be configured within this driver. + + (+) Exti line can be configured in 3 different modes + (++) Interrupt + (++) Event + (++) Both of them + + (+) Configurable Exti lines can be configured with 3 different triggers + (++) Rising + (++) Falling + (++) Both of them + + (+) When set in interrupt mode, configurable Exti lines have two diffenrents + interrupt pending registers which allow to distinguish which transition + occurs: + (++) Rising edge pending interrupt + (++) Falling + + (+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can + be selected through multiplexer. + + ##### How to use this driver ##### + ============================================================================== + [..] + + (#) Configure the EXTI line using HAL_EXTI_SetConfigLine(). + (++) Choose the interrupt line number by setting "Line" member from + EXTI_ConfigTypeDef structure. + (++) Configure the interrupt and/or event mode using "Mode" member from + EXTI_ConfigTypeDef structure. + (++) For configurable lines, configure rising and/or falling trigger + "Trigger" member from EXTI_ConfigTypeDef structure. + (++) For Exti lines linked to gpio, choose gpio port using "GPIOSel" + member from GPIO_InitTypeDef structure. + + (#) Get current Exti configuration of a dedicated line using + HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter. + + (#) Clear Exti configuration of a dedicated line using HAL_EXTI_ClearConfigLine(). + (++) Provide exiting handle as parameter. + + (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback(). + (++) Provide exiting handle as first parameter. + (++) Provide which callback will be registered using one value from + EXTI_CallbackIDTypeDef. + (++) Provide callback function pointer. + + (#) Get interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Clear interrupt pending bit using HAL_EXTI_ClearPending(). + + (#) Generate software interrupt using HAL_EXTI_GenerateSWI(). + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup EXTI + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rule: + * Rule-18.1_b - Medium: Array `EXTICR' 1st subscript interval [0,7] may be out + * of bounds [0,3] in following API : + * HAL_EXTI_SetConfigLine + * HAL_EXTI_GetConfigLine + * HAL_EXTI_ClearConfigLine + */ + +#ifdef HAL_EXTI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +#define EXTI_MODE_OFFSET 0x04u /* 0x10: offset between CPU IMR/EMR registers */ +#define EXTI_CONFIG_OFFSET 0x08u /* 0x20: offset between CPU Rising/Falling configuration registers */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup EXTI_Exported_Functions + * @{ + */ + +/** @addtogroup EXTI_Exported_Functions_Group1 + * @brief Configuration functions + * +@verbatim + =============================================================================== + ##### Configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Set configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on EXTI configuration to be set. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_EXTI_LINE(pExtiConfig->Line)); + assert_param(IS_EXTI_MODE(pExtiConfig->Mode)); + + /* Assign line number to handle */ + hexti->Line = pExtiConfig->Line; + + /* compute line register offset and line mask */ + offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* Configure triggers for configurable lines */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) + { + assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger)); + + /* Configure rising trigger */ + regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store rising trigger mode */ + *regaddr = regval; + + /* Configure falling trigger */ + regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store falling trigger mode */ + *regaddr = regval; + + /* Configure gpio port selection in case of gpio exti line */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel)); + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = EXTI->EXTICR[linepos >> 2u]; + regval &= ~(EXTI_EXTICR1_EXTI0 << (EXTI_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + regval |= (pExtiConfig->GPIOSel << (EXTI_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + EXTI->EXTICR[linepos >> 2u] = regval; + } + } + + /* Configure interrupt mode : read current mode */ + regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store interrupt mode */ + *regaddr = regval; + + /* Configure event mode : read current mode */ + regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store event mode */ + *regaddr = regval; + + return HAL_OK; +} + + +/** + * @brief Get configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on structure to store Exti configuration. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* Store handle line number to configiguration structure */ + pExtiConfig->Line = hexti->Line; + + /* compute line register offset and line mask */ + offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* 1] Get core mode : interrupt */ + regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Mode = EXTI_MODE_INTERRUPT; + } + else + { + pExtiConfig->Mode = EXTI_MODE_NONE; + } + + /* Get event mode */ + regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Mode |= EXTI_MODE_EVENT; + } + + /* Get default Trigger and GPIOSel configuration */ + pExtiConfig->Trigger = EXTI_TRIGGER_NONE; + pExtiConfig->GPIOSel = 0x00u; + + /* 2] Get trigger for configurable lines : rising */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) + { + regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Check if configuration of selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Trigger = EXTI_TRIGGER_RISING; + } + + /* Get falling configuration */ + regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Check if configuration of selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING; + } + + /* Get Gpio port selection for gpio lines */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = EXTI->EXTICR[linepos >> 2u]; + pExtiConfig->GPIOSel = (regval >> (EXTI_EXTICR1_EXTI1_Pos * (linepos & 0x03u))) & EXTI_EXTICR1_EXTI0; + } + } + + return HAL_OK; +} + + +/** + * @brief Clear whole configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* 1] Clear interrupt mode */ + regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* 2] Clear event mode */ + regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* 3] Clear triggers in case of configurable lines */ + if ((hexti->Line & EXTI_CONFIG) != 0x00u) + { + regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* Get Gpio port selection for gpio lines */ + if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = EXTI->EXTICR[linepos >> 2u]; + regval &= ~(EXTI_EXTICR1_EXTI0 << (EXTI_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + EXTI->EXTICR[linepos >> 2u] = regval; + } + } + + return HAL_OK; +} + + +/** + * @brief Register callback for a dedicaated Exti line. + * @param hexti Exti handle. + * @param CallbackID User callback identifier. + * This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values. + * @param pPendingCbfn function pointer to be stored as callback. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)) +{ + HAL_StatusTypeDef status = HAL_OK; + + switch (CallbackID) + { + case HAL_EXTI_COMMON_CB_ID: + hexti->RisingCallback = pPendingCbfn; + hexti->FallingCallback = pPendingCbfn; + break; + + case HAL_EXTI_RISING_CB_ID: + hexti->RisingCallback = pPendingCbfn; + break; + + case HAL_EXTI_FALLING_CB_ID: + hexti->FallingCallback = pPendingCbfn; + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Store line number as handle private field. + * @param hexti Exti handle. + * @param ExtiLine Exti line number. + * This parameter can be from 0 to @ref EXTI_LINE_NB. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(ExtiLine)); + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + else + { + /* Store line number as handle private field */ + hexti->Line = ExtiLine; + + return HAL_OK; + } +} + + +/** + * @} + */ + +/** @addtogroup EXTI_Exported_Functions_Group2 + * @brief EXTI IO functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Handle EXTI interrupt request. + * @param hexti Exti handle. + * @retval none. + */ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t maskline; + uint32_t offset; + + /* Compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + /* Get rising edge pending bit */ + regaddr = (&EXTI->RPR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & maskline); + + if (regval != 0x00u) + { + /* Clear pending bit */ + *regaddr = maskline; + + /* Call rising callback */ + if (hexti->RisingCallback != NULL) + { + hexti->RisingCallback(); + } + } + + /* Get falling edge pending bit */ + regaddr = (&EXTI->FPR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & maskline); + + if (regval != 0x00u) + { + /* Clear pending bit */ + *regaddr = maskline; + + /* Call rising callback */ + if (hexti->FallingCallback != NULL) + { + hexti->FallingCallback(); + } + } +} + + +/** + * @brief Get interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be checked. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING + * @arg @ref EXTI_TRIGGER_FALLING + * @retval 1 if interrupt is pending else 0. + */ +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + if (Edge != EXTI_TRIGGER_RISING) + { + /* Get falling edge pending bit */ + regaddr = (&EXTI->FPR1 + (EXTI_CONFIG_OFFSET * offset)); + } + else + { + /* Get rising edge pending bit */ + regaddr = (&EXTI->RPR1 + (EXTI_CONFIG_OFFSET * offset)); + } + + /* return 1 if bit is set else 0 */ + regval = ((*regaddr & maskline) >> linepos); + return regval; +} + + +/** + * @brief Clear interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be clear. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING + * @arg @ref EXTI_TRIGGER_FALLING + * @retval None. + */ +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + __IO uint32_t *regaddr; + uint32_t maskline; + uint32_t offset; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + if (Edge != EXTI_TRIGGER_RISING) + { + /* Get falling edge pending register address */ + regaddr = (&EXTI->FPR1 + (EXTI_CONFIG_OFFSET * offset)); + } + else + { + /* Get falling edge pending register address */ + regaddr = (&EXTI->RPR1 + (EXTI_CONFIG_OFFSET * offset)); + } + + /* Clear Pending bit */ + *regaddr = maskline; +} + + +/** + * @brief Generate a software interrupt for a dedicated line. + * @param hexti Exti handle. + * @retval None. + */ +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t maskline; + uint32_t offset; + + /* Check parameterd */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + regaddr = (&EXTI->SWIER1 + (EXTI_CONFIG_OFFSET * offset)); + *regaddr = maskline; +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_EXTI_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash.c new file mode 100644 index 0000000..0cb7b63 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash.c @@ -0,0 +1,730 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_flash.c + * @author MCD Application Team + * @brief FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the internal FLASH memory: + * + Program operations functions + * + Memory Control functions + * + Peripheral Errors functions + * + @verbatim + ============================================================================== + ##### FLASH peripheral features ##### + ============================================================================== + + [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses + to the Flash memory. It implements the erase and program Flash memory operations + and the read and write protection mechanisms. + + [..] The Flash memory interface accelerates code execution with a system of instruction + prefetch and cache lines. + + [..] The FLASH main features are: + (+) Flash memory read operations + (+) Flash memory program/erase operations + (+) Read / write protections + (+) Option bytes programming + (+) Prefetch on I-Code + (+) 32 cache lines of 4*64 bits on I-Code + (+) Error code correction (ECC) : Data in flash are 72-bits word + (8 bits added per double word) + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver provides functions and macros to configure and program the FLASH + memory of all STM32G0xx devices. + + (#) Flash Memory IO Programming functions: + (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and + HAL_FLASH_Lock() functions + (++) Program functions: double word and fast program (full row programming) + (++) There are two modes of programming: + (+++) Polling mode using HAL_FLASH_Program() function + (+++) Interrupt mode using HAL_FLASH_Program_IT() function + + (#) Interrupts and flags management functions: + (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler() + (++) Callback functions are called when the flash operations are finished : + HAL_FLASH_EndOfOperationCallback() when everything is ok, otherwise + HAL_FLASH_OperationErrorCallback() + (++) Get error flag status by calling HAL_GetError() + + (#) Option bytes management functions : + (++) Lock and Unlock the option bytes using HAL_FLASH_OB_Unlock() and + HAL_FLASH_OB_Lock() functions + (++) Launch the reload of the option bytes using HAL_FLASH_OB_Launch() function. + In this case, a reset is generated + + [..] + In addition to these functions, this driver includes a set of macros allowing + to handle the following operations: + (+) Set the latency + (+) Enable/Disable the prefetch buffer + (+) Enable/Disable the Instruction cache + (+) Reset the Instruction cache + (+) Enable/Disable the Flash power-down during low-power run and sleep modes + (+) Enable/Disable the Flash interrupts + (+) Monitor the Flash flags status + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup FLASH FLASH + * @brief FLASH HAL module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Variables FLASH Private Variables + * @{ + */ +/** + * @brief Variable used for Program/Erase sectors under interruption + */ +FLASH_ProcessTypeDef pFlash = {.Lock = HAL_UNLOCKED, \ + .ErrorCode = HAL_FLASH_ERROR_NONE, \ + .ProcedureOnGoing = FLASH_TYPENONE, \ + .Address = 0U, \ + .Banks = 0U, \ + .Page = 0U, \ + .NbPagesToErase = 0U + }; +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASH_Private_Functions FLASH Private Functions + * @{ + */ +static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data); +static void FLASH_Program_Fast(uint32_t Address, uint32_t DataAddress); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Functions FLASH Exported Functions + * @{ + */ + +/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions + * @brief Programming operation functions + * +@verbatim + =============================================================================== + ##### Programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the FLASH + program operations. + +@endverbatim + * @{ + */ + +/** + * @brief Program double word or fast program of a row at a specified address. + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address Specifies the address to be programmed. + * @param Data Specifies the data to be programmed + * This parameter is the data for the double word program and the address where + * are stored the data for the row fast program depending on the TypeProgram: + * TypeProgram = FLASH_TYPEPROGRAM_DOUBLEWORD (64-bit) + * TypeProgram = FLASH_TYPEPROGRAM_FAST (32-bit). + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + if (TypeProgram == FLASH_TYPEPROGRAM_DOUBLEWORD) + { + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Program double-word (64-bit) at a specified address */ + FLASH_Program_DoubleWord(Address, Data); + } + else + { + /* Check the parameters */ + assert_param(IS_FLASH_FAST_PROGRAM_ADDRESS(Address)); + + /* Fast program a 32 row double-word (64-bit) at a specified address */ + FLASH_Program_Fast(Address, (uint32_t)Data); + } + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* If the program operation is completed, disable the PG or FSTPG Bit */ + CLEAR_BIT(FLASH->CR, TypeProgram); + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + /* return status */ + return status; +} + +/** + * @brief Program double word or fast program of a row at a specified address with interrupt enabled. + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address Specifies the address to be programmed. + * @param Data Specifies the data to be programmed + * This parameter is the data for the double word program and the address where + * are stored the data for the row fast program depending on the TypeProgram: + * TypeProgram = FLASH_TYPEPROGRAM_DOUBLEWORD (64-bit) + * TypeProgram = FLASH_TYPEPROGRAM_FAST (32-bit). + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } + else + { + /* Set internal variables used by the IRQ handler */ + pFlash.ProcedureOnGoing = TypeProgram; + pFlash.Address = Address; + + /* Enable End of Operation and Error interrupts */ + FLASH->CR |= FLASH_CR_EOPIE | FLASH_CR_ERRIE; + + if (TypeProgram == FLASH_TYPEPROGRAM_DOUBLEWORD) + { + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Program double-word (64-bit) at a specified address */ + FLASH_Program_DoubleWord(Address, Data); + } + else + { + /* Check the parameters */ + assert_param(IS_FLASH_FAST_PROGRAM_ADDRESS(Address)); + + /* Fast program a 32 row double-word (64-bit) at a specified address */ + FLASH_Program_Fast(Address, (uint32_t)Data); + } + } + + /* return status */ + return status; +} + +/** + * @brief Handle FLASH interrupt request. + * @retval None + */ +void HAL_FLASH_IRQHandler(void) +{ + uint32_t param; + uint32_t error; + + /* Save flash errors. */ + error = (FLASH->SR & FLASH_SR_ERRORS); + + /* A] Set parameter for user or error callbacks */ + /* check operation was a program or erase */ + if ((pFlash.ProcedureOnGoing & FLASH_TYPEERASE_MASS) != 0x00U) + { + /* return bank number */ + param = pFlash.Banks; + } + else + { + /* Clear operation only for page erase or program */ + CLEAR_BIT(FLASH->CR, pFlash.ProcedureOnGoing); + + if ((pFlash.ProcedureOnGoing & (FLASH_TYPEPROGRAM_DOUBLEWORD | FLASH_TYPEPROGRAM_FAST)) != 0x00U) + { + /* return address being programmed */ + param = pFlash.Address; + } + else + { + /* return page number being erased */ + param = pFlash.Page; + } + } + + /* B] Check errors */ + if (error != 0x00U) + { + /*Save the error code*/ + pFlash.ErrorCode |= error; + + /* clear error flags */ + FLASH->SR = FLASH_SR_ERRORS; + + /*Stop the procedure ongoing*/ + pFlash.ProcedureOnGoing = FLASH_TYPENONE; + + /* Error callback */ + HAL_FLASH_OperationErrorCallback(param); + } + + /* C] Check FLASH End of Operation flag */ + if ((FLASH->SR & FLASH_SR_EOP) != 0x00U) + { + /* Clear FLASH End of Operation pending bit */ + FLASH->SR = FLASH_SR_EOP; + + if (pFlash.ProcedureOnGoing == FLASH_TYPEERASE_PAGES) + { + /* Nb of pages to erased can be decreased */ + pFlash.NbPagesToErase--; + + /* Check if there are still pages to erase*/ + if (pFlash.NbPagesToErase != 0x00U) + { + /* Increment page number */ + pFlash.Page++; + FLASH_PageErase(pFlash.Banks, pFlash.Page); + } + else + { + /* No more pages to erase: stop erase pages procedure */ + pFlash.ProcedureOnGoing = FLASH_TYPENONE; + } + } + else + { + /*Stop the ongoing procedure */ + pFlash.ProcedureOnGoing = FLASH_TYPENONE; + } + + /* User callback */ + HAL_FLASH_EndOfOperationCallback(param); + } + + if (pFlash.ProcedureOnGoing == FLASH_TYPENONE) + { + /* Disable End of Operation and Error interrupts */ + FLASH->CR &= ~(FLASH_CR_EOPIE | FLASH_CR_ERRIE); + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } +} + +/** + * @brief FLASH end of operation interrupt callback. + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: 0 + * Page Erase: Page which has been erased + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_FLASH_EndOfOperationCallback could be implemented in the user file + */ +} + +/** + * @brief FLASH operation error interrupt callback. + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: 0 + * Page Erase: Page number which returned an error + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_FLASH_OperationErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions + * @brief Management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the FLASH + memory operations. + +@endverbatim + * @{ + */ + +/** + * @brief Unlock the FLASH control register access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0x00U) + { + /* Authorize the FLASH Registers access */ + WRITE_REG(FLASH->KEYR, FLASH_KEY1); + WRITE_REG(FLASH->KEYR, FLASH_KEY2); + + /* verify Flash is unlock */ + if (READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0x00U) + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Lock the FLASH control register access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Lock(void) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Wait for last operation to be completed */ + (void)FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* Set the LOCK Bit to lock the FLASH Registers access */ + SET_BIT(FLASH->CR, FLASH_CR_LOCK); + + /* verify Flash is locked */ + if (READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0x00u) + { + status = HAL_OK; + } + + return status; +} + +/** + * @brief Unlock the FLASH Option Bytes Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + if (READ_BIT(FLASH->CR, FLASH_CR_OPTLOCK) != 0x00U) + { + /* Authorizes the Option Byte register programming */ + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1); + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2); + + /* verify option bytes are unlocked */ + if (READ_BIT(FLASH->CR, FLASH_CR_OPTLOCK) == 0x00U) + { + status = HAL_OK; + } + } + + return status; +} + +/** + * @brief Lock the FLASH Option Bytes Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Wait for last operation to be completed */ + (void)FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */ + SET_BIT(FLASH->CR, FLASH_CR_OPTLOCK); + + /* verify option bytes are locked */ + if (READ_BIT(FLASH->CR, FLASH_CR_OPTLOCK) != 0x00u) + { + status = HAL_OK; + } + + return status; +} + +/** + * @brief Launch the option byte loading. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void) +{ + /* Set the bit to force the option byte reloading */ + SET_BIT(FLASH->CR, FLASH_CR_OBL_LAUNCH); + + /* We should not reach here : Option byte launch generates Option byte reset + so return error */ + return HAL_ERROR; +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time Errors of the FLASH peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Get the specific FLASH error flag. + * @retval FLASH_ErrorCode The returned value can be + * @arg @ref HAL_FLASH_ERROR_NONE No error set + * @arg @ref HAL_FLASH_ERROR_OP Operation error + * @arg @ref HAL_FLASH_ERROR_PROG Programming error + * @arg @ref HAL_FLASH_ERROR_WRP Write protection error + * @arg @ref HAL_FLASH_ERROR_PGA Programming alignment error + * @arg @ref HAL_FLASH_ERROR_SIZ Size error + * @arg @ref HAL_FLASH_ERROR_PGS Programming sequence error + * @arg @ref HAL_FLASH_ERROR_MIS Fast programming data miss error + * @arg @ref HAL_FLASH_ERROR_FAST Fast programming error + * @arg @ref HAL_FLASH_ERROR_RD Read Protection error (PCROP)(*) + * @arg @ref HAL_FLASH_ERROR_OPTV Option validity error + * @arg @ref HAL_FLASH_ERROR_ECCD two ECC errors have been detected + * @note (*) availability depends on devices + */ +uint32_t HAL_FLASH_GetError(void) +{ + return pFlash.ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** @addtogroup FLASH_Private_Functions + * @{ + */ + +/** + * @brief Wait for a FLASH operation to complete. + * @param Timeout maximum flash operation timeout + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) +{ + uint32_t error; + uint32_t tickstart = HAL_GetTick(); + + /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. + Even if the FLASH operation fails, the BUSY flag will be reset and an error + flag will be set */ + +#if defined(FLASH_DBANK_SUPPORT) + error = (FLASH_SR_BSY1 | FLASH_SR_BSY2); +#else + error = FLASH_SR_BSY1; +#endif /* FLASH_DBANK_SUPPORT */ + + while ((FLASH->SR & error) != 0x00U) + { + if(Timeout != HAL_MAX_DELAY) + { + if ((HAL_GetTick() - tickstart) >= Timeout) + { + return HAL_TIMEOUT; + } + } + } + + /* check flash errors */ + error = (FLASH->SR & FLASH_SR_ERRORS); + + /* Clear SR register */ + FLASH->SR = FLASH_SR_CLEAR; + + if (error != 0x00U) + { + /*Save the error code*/ + pFlash.ErrorCode = error; + return HAL_ERROR; + } + + /* Wait for control register to be written */ + while ((FLASH->SR & FLASH_SR_CFGBSY) != 0x00U) + { + if(Timeout != HAL_MAX_DELAY) + { + if ((HAL_GetTick() - tickstart) >= Timeout) + { + return HAL_TIMEOUT; + } + } + } + + return HAL_OK; +} + +/** + * @brief Program double-word (64-bit) at a specified address. + * @param Address Specifies the address to be programmed. + * @param Data Specifies the data to be programmed. + * @retval None + */ +static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data) +{ + /* Set PG bit */ + SET_BIT(FLASH->CR, FLASH_CR_PG); + + /* Program first word */ + *(uint32_t *)Address = (uint32_t)Data; + + /* Barrier to ensure programming is performed in 2 steps, in right order + (independently of compiler optimization behavior) */ + __ISB(); + + /* Program second word */ + *(uint32_t *)(Address + 4U) = (uint32_t)(Data >> 32U); +} + +/** + * @brief Fast program a 32 row double-word (64-bit) at a specified address. + * @param Address Specifies the address to be programmed. + * @param DataAddress Specifies the address where the data are stored. + * @retval None + */ +static __RAM_FUNC void FLASH_Program_Fast(uint32_t Address, uint32_t DataAddress) +{ + uint8_t index = 0; + uint32_t dest = Address; + uint32_t src = DataAddress; + uint32_t primask_bit; + + /* Set FSTPG bit */ + SET_BIT(FLASH->CR, FLASH_CR_FSTPG); + + /* Enter critical section: row programming should not be longer than 7 ms */ + primask_bit = __get_PRIMASK(); + __disable_irq(); + + /* Fast Program : 64 words */ + while (index < 64U) + { + *(uint32_t *)dest = *(uint32_t *)src; + src += 4U; + dest += 4U; + index++; + } + + /* wait for BSY1 in order to be sure that flash operation is ended befoire + allowing prefetch in flash. Timeout does not return status, as it will + be anyway done later */ + +#if defined(FLASH_DBANK_SUPPORT) + while ((FLASH->SR & (FLASH_SR_BSY1 | FLASH_SR_BSY2)) != 0x00U) +#else + while ((FLASH->SR & FLASH_SR_BSY1) != 0x00U) +#endif /* FLASH_DBANK_SUPPORT */ + { + } + + /* Exit critical section: restore previous priority mask */ + __set_PRIMASK(primask_bit); +} + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash_ex.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash_ex.c new file mode 100644 index 0000000..b31c687 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash_ex.c @@ -0,0 +1,1309 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_flash_ex.c + * @author MCD Application Team + * @brief Extended FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the FLASH extended peripheral: + * + Extended programming operations functions + * + @verbatim + ============================================================================== + ##### Flash Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the FLASH interface for STM32G0xx + devices contains the following additional features + + (+) Capacity up to 128 Kbytes with single bank architecture supporting read-while-write + capability (RWW) + (+) Single bank memory organization + (+) PCROP protection + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure and program the FLASH memory + of all STM32G0xx devices. It includes + (#) Flash Memory Erase functions: + (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and + HAL_FLASH_Lock() functions + (++) Erase function: Erase page, erase all sectors + (++) There are two modes of erase : + (+++) Polling Mode using HAL_FLASHEx_Erase() + (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT() + + (#) Option Bytes Programming function: Use HAL_FLASHEx_OBProgram() to : + (++) Set/Reset the write protection + (++) Set the Read protection Level + (++) Program the user Option Bytes + (++) Configure the PCROP protection + (++) Set Securable memory area and boot entry point + + (#) Get Option Bytes Configuration function: Use HAL_FLASHEx_OBGetConfig() to : + (++) Get the value of a write protection area + (++) Know if the read protection is activated + (++) Get the value of the user Option Bytes + (++) Get Securable memory area and boot entry point information + + (#) Enable or disable debugger usage using HAL_FLASHEx_EnableDebugger and + HAL_FLASHEx_DisableDebugger. + + (#) Check is flash content is empty or not using HAL_FLASHEx_FlashEmptyCheck. + and modify this setting (for flash loader purpose e.g.) using + HAL_FLASHEx_ForceFlashEmpty. + + (#) Enable securable memory area protectionusing HAL_FLASHEx_EnableSecMemProtection + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup FLASHEx FLASHEx + * @brief FLASH Extended HAL module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions + * @{ + */ +static void FLASH_MassErase(uint32_t Banks); +void FLASH_FlushCaches(void); +static void FLASH_OB_WRPConfig(uint32_t WRPArea, uint32_t WRPStartOffset, uint32_t WRDPEndOffset); +static void FLASH_OB_GetWRP(uint32_t WRPArea, uint32_t *WRPStartOffset, uint32_t *WRDPEndOffset); +static void FLASH_OB_OptrConfig(uint32_t UserType, uint32_t UserConfig, uint32_t RDPLevel); +static uint32_t FLASH_OB_GetRDP(void); +static uint32_t FLASH_OB_GetUser(void); +#if defined(FLASH_PCROP_SUPPORT) +static void FLASH_OB_PCROP1AConfig(uint32_t PCROPConfig, uint32_t PCROP1AStartAddr, + uint32_t PCROP1AEndAddr); +static void FLASH_OB_PCROP1BConfig(uint32_t PCROP1BStartAddr, uint32_t PCROP1BEndAddr); +static void FLASH_OB_GetPCROP1A(uint32_t *PCROPConfig, uint32_t *PCROP1AStartAddr, + uint32_t *PCROP1AEndAddr); +static void FLASH_OB_GetPCROP1B(uint32_t *PCROP1BStartAddr, uint32_t *PCROP1BEndAddr); +#if defined(FLASH_DBANK_SUPPORT) +static void FLASH_OB_PCROP2AConfig(uint32_t PCROP2AStartAddr, uint32_t PCROP2AEndAddr); +static void FLASH_OB_PCROP2BConfig(uint32_t PCROP2BStartAddr, uint32_t PCROP2BEndAddr); +static void FLASH_OB_GetPCROP2A(uint32_t *PCROP2AStartAddr, uint32_t *PCROP2AEndAddr); +static void FLASH_OB_GetPCROP2B(uint32_t *PCROP2BStartAddr, uint32_t *PCROP2BEndAddr); +#endif /* FLASH_DBANK_SUPPORT */ +#endif /* FLASH_PCROP_SUPPORT */ +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +#if defined(FLASH_DBANK_SUPPORT) +static void FLASH_OB_SecMemConfig(uint32_t BootEntry, uint32_t SecSize, uint32_t SecSize2); +static void FLASH_OB_GetSecMem(uint32_t *BootEntry, uint32_t *SecSize, uint32_t *SecSize2); +#else +static void FLASH_OB_SecMemConfig(uint32_t BootEntry, uint32_t SecSize); +static void FLASH_OB_GetSecMem(uint32_t *BootEntry, uint32_t *SecSize); +#endif /* FLASH_DBANK_SUPPORT */ +#endif /* FLASH_SECURABLE_MEMORY_SUPPORT */ +/** + * @} + */ + +/* Exported functions -------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Functions FLASH Extended Exported Functions + * @{ + */ + +/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions + * @brief Extended IO operation functions + * +@verbatim + =============================================================================== + ##### Extended programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the Extended FLASH + programming operations Operations. + +@endverbatim + * @{ + */ +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages. + * @param[in] pEraseInit Pointer to an @ref FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * @param[out] PageError Pointer to variable that contains the configuration + * information on faulty page in case of error (0xFFFFFFFF means that all + * the pages have been correctly erased) + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError) +{ + HAL_StatusTypeDef status; + uint32_t index; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { +#if !defined(FLASH_DBANK_SUPPORT) + /* For single bank product force Banks to Bank 1 */ + pEraseInit->Banks = FLASH_BANK_1; +#endif /* FLASH_DBANK_SUPPORT */ + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASS) + { + /* Proceed to Mass Erase */ + FLASH_MassErase(pEraseInit->Banks); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + else + { + /*Initialization of PageError variable*/ + *PageError = 0xFFFFFFFFU; + + for (index = pEraseInit->Page; index < (pEraseInit->Page + pEraseInit->NbPages); index++) + { + /* Start erase page */ + FLASH_PageErase(pEraseInit->Banks, index); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status != HAL_OK) + { + /* In case of error, stop erase procedure and return the faulty address */ + *PageError = index; + break; + } + } + + /* If operation is completed or interrupted, disable the Page Erase Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PER); + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + /* return status */ + return status; +} + + +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages with interrupt enabled. + * @param pEraseInit Pointer to an @ref FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* save procedure for interrupt treatment */ + pFlash.ProcedureOnGoing = pEraseInit->TypeErase; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } + else + { +#if !defined(FLASH_DBANK_SUPPORT) + /* For single bank product force Banks to Bank 1 */ + pEraseInit->Banks = FLASH_BANK_1; +#endif /* FLASH_DBANK_SUPPORT */ + /* Store Bank number */ + pFlash.Banks = pEraseInit->Banks; + + /* Enable End of Operation and Error interrupts */ + FLASH->CR |= FLASH_CR_EOPIE | FLASH_CR_ERRIE; + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASS) + { + /* Set Page to 0 for Interrupt callback management */ + pFlash.Page = 0; + + /* Proceed to Mass Erase */ + FLASH_MassErase(pEraseInit->Banks); + } + else + { + /* Erase by page to be done */ + pFlash.NbPagesToErase = pEraseInit->NbPages; + pFlash.Page = pEraseInit->Page; + + /*Erase 1st page and wait for IT */ + FLASH_PageErase(pEraseInit->Banks, pEraseInit->Page); + } + } + + /* return status */ + return status; +} + +/** + * @brief Program Option bytes. + * @param pOBInit Pointer to an @ref FLASH_OBProgramInitTypeDef structure that + * contains the configuration information for the programming. + * @note To configure any option bytes, the option lock bit OPTLOCK must be + * cleared with the call of @ref HAL_FLASH_OB_Unlock() function. + * @note New option bytes configuration will be taken into account only + * - after an option bytes launch through the call of @ref HAL_FLASH_OB_Launch() + * - a Power On Reset + * - an exit from Standby or Shutdown mode. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) +{ + uint32_t optr; + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Write protection configuration */ + if ((pOBInit->OptionType & OPTIONBYTE_WRP) != 0x00U) + { + /* Configure of Write protection on the selected area */ + FLASH_OB_WRPConfig(pOBInit->WRPArea, pOBInit->WRPStartOffset, pOBInit->WRPEndOffset); + } + + /* Option register */ + if ((pOBInit->OptionType & (OPTIONBYTE_RDP | OPTIONBYTE_USER)) == (OPTIONBYTE_RDP | OPTIONBYTE_USER)) + { + /* Fully modify OPTR register with RDP & user data */ + FLASH_OB_OptrConfig(pOBInit->USERType, pOBInit->USERConfig, pOBInit->RDPLevel); + } + else if ((pOBInit->OptionType & OPTIONBYTE_RDP) != 0x00U) + { + /* Only modify RDP so get current user data */ + optr = FLASH_OB_GetUser(); + FLASH_OB_OptrConfig(optr, optr, pOBInit->RDPLevel); + } + else if ((pOBInit->OptionType & OPTIONBYTE_USER) != 0x00U) + { + /* Only modify user so get current RDP level */ + optr = FLASH_OB_GetRDP(); + FLASH_OB_OptrConfig(pOBInit->USERType, pOBInit->USERConfig, optr); + } + else + { + /* nothing to do */ + } + +#if defined(FLASH_PCROP_SUPPORT) + /* PCROP Configuration */ + if ((pOBInit->OptionType & OPTIONBYTE_PCROP) != 0x00U) + { + /* Check the parameters */ + assert_param(IS_OB_PCROP_CONFIG(pOBInit->PCROPConfig)); + + if ((pOBInit->PCROPConfig & (OB_PCROP_ZONE_A | OB_PCROP_RDP_ERASE)) != 0x00U) + { + /* Configure the 1A Proprietary code readout protection */ + FLASH_OB_PCROP1AConfig(pOBInit->PCROPConfig, pOBInit->PCROP1AStartAddr, pOBInit->PCROP1AEndAddr); + } + + if ((pOBInit->PCROPConfig & OB_PCROP_ZONE_B) != 0x00U) + { + /* Configure the 1B Proprietary code readout protection */ + FLASH_OB_PCROP1BConfig(pOBInit->PCROP1BStartAddr, pOBInit->PCROP1BEndAddr); + } + +#if defined(FLASH_DBANK_SUPPORT) + if ((pOBInit->PCROPConfig & OB_PCROP_ZONE2_A) != 0x00U) + { + /* Configure the 2A Proprietary code readout protection */ + FLASH_OB_PCROP2AConfig(pOBInit->PCROP2AStartAddr, pOBInit->PCROP2AEndAddr); + } + + if ((pOBInit->PCROPConfig & OB_PCROP_ZONE2_B) != 0x00U) + { + /* Configure the 2B Proprietary code readout protection */ + FLASH_OB_PCROP2BConfig(pOBInit->PCROP2BStartAddr, pOBInit->PCROP2BEndAddr); + } +#endif /* FLASH_DBANK_SUPPORT */ + } +#endif /* FLASH_PCROP_SUPPORT */ + +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) + /* Securable Memory Area Configuration */ + if ((pOBInit->OptionType & OPTIONBYTE_SEC) != 0x00U) + { +#if defined(FLASH_DBANK_SUPPORT) + /* Configure the securable memory area protection */ + FLASH_OB_SecMemConfig(pOBInit->BootEntryPoint, pOBInit->SecSize, pOBInit->SecSize2); +#else + /* Configure the securable memory area protection */ + FLASH_OB_SecMemConfig(pOBInit->BootEntryPoint, pOBInit->SecSize); +#endif /* FLASH_DBANK_SUPPORT */ + } +#endif /* FLASH_SECURABLE_MEMORY_SUPPORT */ + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + /* Set OPTSTRT Bit */ + SET_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* If the option byte program operation is completed, disable the OPTSTRT Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + /* return status */ + return status; +} + +/** + * @brief Get the Option bytes configuration. + * @note warning: this API only read flash register, it does not reflect any + * change that would have been programmed between previous Option byte + * loading and current call. + * @param pOBInit Pointer to an @ref FLASH_OBProgramInitTypeDef structure that contains the + * configuration information. The fields pOBInit->WRPArea should + * indicate which area is requested for the WRP. + * @retval None + */ +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) +{ + pOBInit->OptionType = OPTIONBYTE_ALL; + + /* Get write protection on the selected area */ + FLASH_OB_GetWRP(pOBInit->WRPArea, &(pOBInit->WRPStartOffset), &(pOBInit->WRPEndOffset)); + + /* Get Read protection level */ + pOBInit->RDPLevel = FLASH_OB_GetRDP(); + + /* Get the user option bytes */ + pOBInit->USERConfig = FLASH_OB_GetUser(); + pOBInit->USERType = OB_USER_ALL; + +#if defined(FLASH_PCROP_SUPPORT) + /* Get the Proprietary code readout protection */ + FLASH_OB_GetPCROP1A(&(pOBInit->PCROPConfig), &(pOBInit->PCROP1AStartAddr), &(pOBInit->PCROP1AEndAddr)); + FLASH_OB_GetPCROP1B(&(pOBInit->PCROP1BStartAddr), &(pOBInit->PCROP1BEndAddr)); + pOBInit->PCROPConfig |= (OB_PCROP_ZONE_A | OB_PCROP_ZONE_B); +#if defined(FLASH_DBANK_SUPPORT) + FLASH_OB_GetPCROP2A(&(pOBInit->PCROP2AStartAddr), &(pOBInit->PCROP2AEndAddr)); + FLASH_OB_GetPCROP2B(&(pOBInit->PCROP2BStartAddr), &(pOBInit->PCROP2BEndAddr)); + pOBInit->PCROPConfig |= (OB_PCROP_ZONE2_A | OB_PCROP_ZONE2_B); +#endif /* FLASH_DBANK_SUPPORT */ +#endif /* FLASH_PCROP_SUPPORT */ + +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +#if defined(FLASH_DBANK_SUPPORT) + /* Get the Securable Memory Area protection */ + FLASH_OB_GetSecMem(&(pOBInit->BootEntryPoint), &(pOBInit->SecSize), &(pOBInit->SecSize2)); +#else + /* Get the Securable Memory Area protection */ + FLASH_OB_GetSecMem(&(pOBInit->BootEntryPoint), &(pOBInit->SecSize)); +#endif /* FLASH_DBANK_SUPPORT */ +#endif /* FLASH_SECURABLE_MEMORY_SUPPORT */ +} + +#if defined(FLASH_ACR_DBG_SWEN) +/** + * @brief Enable Debugger. + * @note After calling this API, flash interface allow debugger intrusion. + * @retval None + */ +void HAL_FLASHEx_EnableDebugger(void) +{ + FLASH->ACR |= FLASH_ACR_DBG_SWEN; +} + + +/** + * @brief Disable Debugger. + * @note After calling this API, Debugger is disabled: it is no more possible to + * break, see CPU register, etc... + * @retval None + */ +void HAL_FLASHEx_DisableDebugger(void) +{ + FLASH->ACR &= ~FLASH_ACR_DBG_SWEN; +} +#endif /* FLASH_ACR_DBG_SWEN */ + +/** + * @brief Flash Empty check + * @note This API checks if first location in Flash is programmed or not. + * This check is done once by Option Byte Loader. + * @retval 0 if 1st location is not programmed else + */ +uint32_t HAL_FLASHEx_FlashEmptyCheck(void) +{ + return ((FLASH->ACR & FLASH_ACR_PROGEMPTY)); +} + + +/** + * @brief Force Empty check value. + * @note Allows to modify program empty check value in order to force this + * infrmation in Flash Interface, for all next reset that do not launch + * Option Byte Loader. + * @param FlashEmpty this parameter can be a value of @ref FLASHEx_Empty_Check + * @retval None + */ +void HAL_FLASHEx_ForceFlashEmpty(uint32_t FlashEmpty) +{ + uint32_t acr; + assert_param(IS_FLASH_EMPTY_CHECK(FlashEmpty)); + + acr = (FLASH->ACR & ~FLASH_ACR_PROGEMPTY); + FLASH->ACR = (acr | FlashEmpty); +} + + +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +/** + * @brief Securable memory area protection enable + * @param Banks Select Bank to be secured. + * This parameter can be a value of @ref FLASH_Banks + * @note On some devices, there is only 1 bank so parameter has to be set FLASH_BANK_1. + * @note This API locks Securable memory area which is defined in SEC_SIZE option byte + * (that can be retrieved calling HAL_FLASHEx_OBGetConfig API and checking + * Secsize). + * @note SEC_PROT bit can only be set, it will be reset by system reset. + * @retval None + */ +void HAL_FLASHEx_EnableSecMemProtection(uint32_t Banks) +{ +#if defined(FLASH_DBANK_SUPPORT) + assert_param(IS_FLASH_BANK(Banks)); + + if (Banks == (FLASH_BANK_2 | FLASH_BANK_1)) + { + FLASH->CR |= (FLASH_CR_SEC_PROT2 | FLASH_CR_SEC_PROT); + } + else if (Banks == FLASH_BANK_2) + { + FLASH->CR |= FLASH_CR_SEC_PROT2; + } + else +#else + UNUSED(Banks); +#endif /* FLASH_DBANK_SUPPORT */ + { + FLASH->CR |= FLASH_CR_SEC_PROT; + } +} +#endif /* FLASH_SECURABLE_MEMORY_SUPPORT */ +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup FLASHEx_Private_Functions + * @{ + */ + +/** + * @brief Mass erase of FLASH memory. + * @param Banks: Banks to be erased + * This parameter can be a combination of the following values: + * @arg FLASH_BANK_1: Bank1 to be erased + * @arg FLASH_BANK_2: Bank2 to be erased* + * @note (*) availability depends on devices + * @retval None + */ +static void FLASH_MassErase(uint32_t Banks) +{ + /* Check the parameters */ + assert_param(IS_FLASH_BANK(Banks)); + + /* Set the Mass Erase Bit and start bit */ + FLASH->CR |= (FLASH_CR_STRT | Banks); +} + +/** + * @brief Erase the specified FLASH memory page. + * @param Banks: Banks to be erased + * This parameter can one of the following values: + * @arg FLASH_BANK_1: Bank1 to be erased + * @arg FLASH_BANK_2: Bank2 to be erased* + * @param Page FLASH page to erase + * This parameter must be a value between 0 and (max number of pages in Flash - 1) + * @note (*) availability depends on devices + * @retval None + */ +void FLASH_PageErase(uint32_t Banks, uint32_t Page) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_FLASH_BANK(Banks)); + assert_param(IS_FLASH_PAGE(Page)); + + /* Get configuration register, then clear page number */ + tmp = (FLASH->CR & ~FLASH_CR_PNB); + +#if defined(FLASH_DBANK_SUPPORT) + /* Check if page has to be erased in bank 1 or 2 */ + if (Banks != FLASH_BANK_1) + { + tmp |= FLASH_CR_BKER; + } + else + { + tmp &= ~FLASH_CR_BKER; + } +#else + /* Prevent unused argument(s) compilation warning */ + UNUSED(Banks); +#endif /* FLASH_DBANK_SUPPORT */ + + /* Set page number, Page Erase bit & Start bit */ + FLASH->CR = (tmp | (FLASH_CR_STRT | (Page << FLASH_CR_PNB_Pos) | FLASH_CR_PER)); +} + +/** + * @brief Flush the instruction cache. + * @retval None + */ +void FLASH_FlushCaches(void) +{ + /* Flush instruction cache */ + if (READ_BIT(FLASH->ACR, FLASH_ACR_ICEN) != 0U) + { + /* Disable instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); + /* Reset instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_RESET(); + /* Enable instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_ENABLE(); + } +} + +/** + * @brief Configure the write protection of the desired pages. + * @note When WRP is active in a zone, it cannot be erased or programmed. + * Consequently, a software mass erase cannot be performed if one zone + * is write-protected. + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase Flash memory if the CPU debug + * features are connected (JTAG or single wire) or boot code is being + * executed from RAM or System flash, even if WRP is not activated. + * @param WRPArea Specifies the area to be configured. + * This parameter can be one of the following values: + * @arg @ref OB_WRPAREA_ZONE_A Flash Zone A + * @arg @ref OB_WRPAREA_ZONE_B Flash Zone B + * @arg @ref OB_WRPAREA_ZONE2_A Flash Bank 2 Zone A (*) + * @arg @ref OB_WRPAREA_ZONE2_B Flash Bank 2 Zone B (*) + * @note (*) availability depends on devices + * @param WRPStartOffset Specifies the start page of the write protected area + * This parameter can be page number between 0 and (max number of pages in the Flash Bank - 1) + * @param WRDPEndOffset Specifies the end page of the write protected area + * This parameter can be page number between WRPStartOffset and (max number of pages in the Flash Bank - 1) + * @retval None + */ +static void FLASH_OB_WRPConfig(uint32_t WRPArea, uint32_t WRPStartOffset, uint32_t WRDPEndOffset) +{ + /* Check the parameters */ + assert_param(IS_OB_WRPAREA(WRPArea)); + assert_param(IS_FLASH_PAGE(WRPStartOffset)); + assert_param(IS_FLASH_PAGE(WRDPEndOffset)); + + /* Configure the write protected area */ + if (WRPArea == OB_WRPAREA_ZONE_A) + { + FLASH->WRP1AR = ((WRDPEndOffset << FLASH_WRP1AR_WRP1A_END_Pos) | WRPStartOffset); + } +#if defined(FLASH_DBANK_SUPPORT) + else if (WRPArea == OB_WRPAREA_ZONE2_A) + { + FLASH->WRP2AR = ((WRDPEndOffset << FLASH_WRP2AR_WRP2A_END_Pos) | WRPStartOffset); + } + else if (WRPArea == OB_WRPAREA_ZONE2_B) + { + FLASH->WRP2BR = ((WRDPEndOffset << FLASH_WRP2BR_WRP2B_END_Pos) | WRPStartOffset); + } +#endif /* FLASH_DBANK_SUPPORT */ + else + { + FLASH->WRP1BR = ((WRDPEndOffset << FLASH_WRP1BR_WRP1B_END_Pos) | WRPStartOffset); + } +} + +/** + * @brief Return the FLASH Write Protection Option Bytes value. + * @param[in] WRPArea Specifies the area to be returned. + * This parameter can be one of the following values: + * @arg @ref OB_WRPAREA_ZONE_A Flash Zone A + * @arg @ref OB_WRPAREA_ZONE_B Flash Zone B + * @arg @ref OB_WRPAREA_ZONE2_A Flash Bank 2 Zone A (*) + * @arg @ref OB_WRPAREA_ZONE2_B Flash Bank 2 Zone B (*) + * @note (*) availability depends on devices + * @param[out] WRPStartOffset Specifies the address where to copied the start page + * of the write protected area + * @param[out] WRDPEndOffset Dpecifies the address where to copied the end page of + * the write protected area + * @retval None + */ +static void FLASH_OB_GetWRP(uint32_t WRPArea, uint32_t *WRPStartOffset, uint32_t *WRDPEndOffset) +{ + /* Check the parameters */ + assert_param(IS_OB_WRPAREA(WRPArea)); + + /* Get the configuration of the write protected area */ + if (WRPArea == OB_WRPAREA_ZONE_A) + { + *WRPStartOffset = READ_BIT(FLASH->WRP1AR, FLASH_WRP1AR_WRP1A_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP1AR, FLASH_WRP1AR_WRP1A_END) >> FLASH_WRP1AR_WRP1A_END_Pos); + } +#if defined(FLASH_DBANK_SUPPORT) + else if (WRPArea == OB_WRPAREA_ZONE2_A) + { + *WRPStartOffset = READ_BIT(FLASH->WRP2AR, FLASH_WRP2AR_WRP2A_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP2AR, FLASH_WRP2AR_WRP2A_END) >> FLASH_WRP2AR_WRP2A_END_Pos); + } + else if (WRPArea == OB_WRPAREA_ZONE2_B) + { + *WRPStartOffset = READ_BIT(FLASH->WRP2BR, FLASH_WRP2BR_WRP2B_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP2BR, FLASH_WRP2BR_WRP2B_END) >> FLASH_WRP2BR_WRP2B_END_Pos); + } +#endif /* FLASH_DBANK_SUPPORT */ + else + { + *WRPStartOffset = READ_BIT(FLASH->WRP1BR, FLASH_WRP1BR_WRP1B_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP1BR, FLASH_WRP1BR_WRP1B_END) >> FLASH_WRP1BR_WRP1B_END_Pos); + } +} + +/** + * @brief Set user & RDP configuration + * @note !!! Warning : When enabling OB_RDP level 2 it is no more possible + * to go back to level 1 or 0 !!! + * @param UserType The FLASH User Option Bytes to be modified. + * This parameter can be a combination of @ref FLASH_OB_USER_Type + * @param UserConfig The FLASH User Option Bytes values. + * This parameter can be a combination of: + * @arg @ref FLASH_OB_USER_BOR_ENABLE(*) + * @arg @ref FLASH_OB_USER_BOR_LEVEL(*) + * @arg @ref FLASH_OB_USER_RESET_CONFIG(*) + * @arg @ref FLASH_OB_USER_nRST_STOP + * @arg @ref FLASH_OB_USER_nRST_STANDBY + * @arg @ref FLASH_OB_USER_nRST_SHUTDOWN(*) + * @arg @ref FLASH_OB_USER_IWDG_SW + * @arg @ref FLASH_OB_USER_IWDG_STOP + * @arg @ref FLASH_OB_USER_IWDG_STANDBY + * @arg @ref FLASH_OB_USER_WWDG_SW + * @arg @ref FLASH_OB_USER_SRAM_PARITY + * @arg @ref FLASH_OB_USER_BANK_SWAP(*) + * @arg @ref FLASH_OB_USER_DUAL_BANK(*) + * @arg @ref FLASH_OB_USER_nBOOT_SEL + * @arg @ref FLASH_OB_USER_nBOOT1 + * @arg @ref FLASH_OB_USER_nBOOT0 + * @arg @ref FLASH_OB_USER_INPUT_RESET_HOLDER(*) + * @param RDPLevel specifies the read protection level. + * This parameter can be one of the following values: + * @arg @ref OB_RDP_LEVEL_0 No protection + * @arg @ref OB_RDP_LEVEL_1 Memory Read protection + * @arg @ref OB_RDP_LEVEL_2 Full chip protection + * @note (*) availability depends on devices + * @retval None + */ +static void FLASH_OB_OptrConfig(uint32_t UserType, uint32_t UserConfig, uint32_t RDPLevel) +{ + uint32_t optr; + + /* Check the parameters */ + assert_param(IS_OB_USER_TYPE(UserType)); + assert_param(IS_OB_USER_CONFIG(UserType, UserConfig)); + assert_param(IS_OB_RDP_LEVEL(RDPLevel)); + + /* Configure the RDP level in the option bytes register */ + optr = FLASH->OPTR; + optr &= ~(UserType | FLASH_OPTR_RDP); + FLASH->OPTR = (optr | UserConfig | RDPLevel); +} + +/** + * @brief Return the FLASH Read Protection level. + * @retval FLASH ReadOut Protection Status: + * This return value can be one of the following values: + * @arg @ref OB_RDP_LEVEL_0 No protection + * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory + * @arg @ref OB_RDP_LEVEL_2 Full chip protection + */ +static uint32_t FLASH_OB_GetRDP(void) +{ + uint32_t rdplvl = READ_BIT(FLASH->OPTR, FLASH_OPTR_RDP); + + if ((rdplvl != OB_RDP_LEVEL_0) && (rdplvl != OB_RDP_LEVEL_2)) + { + return (OB_RDP_LEVEL_1); + } + else + { + return rdplvl; + } +} + +/** + * @brief Return the FLASH User Option Byte value. + * @retval The FLASH User Option Bytes values. It will be a combination of all the following values: + * @arg @ref FLASH_OB_USER_BOR_ENABLE(*) + * @arg @ref FLASH_OB_USER_BOR_LEVEL(*) + * @arg @ref FLASH_OB_USER_RESET_CONFIG(*) + * @arg @ref FLASH_OB_USER_nRST_STOP + * @arg @ref FLASH_OB_USER_nRST_STANDBY + * @arg @ref FLASH_OB_USER_nRST_SHUTDOWN(*) + * @arg @ref FLASH_OB_USER_IWDG_SW + * @arg @ref FLASH_OB_USER_IWDG_STOP + * @arg @ref FLASH_OB_USER_IWDG_STANDBY + * @arg @ref FLASH_OB_USER_WWDG_SW + * @arg @ref FLASH_OB_USER_SRAM_PARITY + * @arg @ref FLASH_OB_USER_BANK_SWAP(*) + * @arg @ref FLASH_OB_USER_DUAL_BANK(*) + * @arg @ref FLASH_OB_USER_nBOOT_SEL + * @arg @ref FLASH_OB_USER_nBOOT1 + * @arg @ref FLASH_OB_USER_nBOOT0 + * @arg @ref FLASH_OB_USER_INPUT_RESET_HOLDER(*) + * @note (*) availability depends on devices + */ +static uint32_t FLASH_OB_GetUser(void) +{ + uint32_t user = ((FLASH->OPTR & ~FLASH_OPTR_RDP) & OB_USER_ALL); + return user; +} + +#if defined(FLASH_PCROP_SUPPORT) +/** + * @brief Configure the 1A Proprietary code readout protection & erase configuration on RDP regression. + * @note It is recommended to align PCROP zone with page granularity when using PCROP_RDP or avoid + * having some executable code in a page where PCROP zone starts or ends. + * @note Minimum PCROP area size is 2 times the chosen granularity: PCROPA_STRT and PCROPA_END. + * So if the requirement is to be able to read-protect 1KB areas, the ROP granularity + * has to be set to 512 Bytes + * @param PCROPConfig specifies the erase configuration (OB_PCROP_RDP_NOT_ERASE or OB_PCROP_RDP_ERASE) + * on RDP level 1 regression. + * @param PCROP1AStartAddr Specifies the Zone 1A Start address of the Proprietary code readout protection + * This parameter can be an address between begin and end of the flash + * @param PCROP1AEndAddr Specifies the Zone 1A end address of the Proprietary code readout protection + * This parameter can be an address between PCROP1AStartAddr and end of the flash + * @retval None + */ +static void FLASH_OB_PCROP1AConfig(uint32_t PCROPConfig, uint32_t PCROP1AStartAddr, uint32_t PCROP1AEndAddr) +{ + uint32_t startoffset; + uint32_t endoffset; + uint32_t pcrop1aend; + uint32_t ropbase; + + /* Check the parameters */ + assert_param(IS_OB_PCROP_CONFIG(PCROPConfig)); + +#if defined(FLASH_DBANK_SUPPORT) + /* Check if banks are swapped (valid if only one bank) */ + if (((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != FLASH_OPTR_nSWAP_BANK) && (FLASH_BANK_NB == 2U)) + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP1AStartAddr)); + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP1AEndAddr)); + + /* Bank swap, bank 1 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else +#endif /* FLASH_DBANK_SUPPORT */ + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP1AStartAddr)); + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP1AEndAddr)); + + /* No Bank swap, bank 1 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + /* get pcrop 1A end register */ + pcrop1aend = FLASH->PCROP1AER; + + /* Configure the Proprietary code readout protection offset */ + if ((PCROPConfig & OB_PCROP_ZONE_A) != 0x00U) + { + /* Compute offset depending on pcrop granularity */ + startoffset = ((PCROP1AStartAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + endoffset = ((PCROP1AEndAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + + /* Set Zone A start offset */ + FLASH->PCROP1ASR = startoffset; + + /* Set Zone A end offset */ + pcrop1aend &= ~FLASH_PCROP1AER_PCROP1A_END; + pcrop1aend |= endoffset; + } + + /* Set RDP erase protection if needed. This bit is only set & will be reset by mass erase */ + if ((PCROPConfig & OB_PCROP_RDP_ERASE) != 0x00U) + { + pcrop1aend |= FLASH_PCROP1AER_PCROP_RDP; + } + + /* set 1A End register */ + FLASH->PCROP1AER = pcrop1aend; +} + +/** + * @brief Configure the 1B Proprietary code readout protection. + * @note It is recommended to align PCROP zone with page granularity when using PCROP_RDP or avoid + * having some executable code in a page where PCROP zone starts or ends. + * @note Minimum PCROP area size is 2 times the chosen granularity: PCROPB_STRT and PCROPB_END. + * So if the requirement is to be able to read-protect 1KB areas, the ROP granularity + * has to be set to 512 Bytes + * @param PCROP1BStartAddr Specifies the Zone 1B Start address of the Proprietary code readout protection + * This parameter can be an address between begin and end of the flash + * @param PCROP1BEndAddr Specifies the Zone 1B end address of the Proprietary code readout protection + * This parameter can be an address between PCROP1BStartAddr and end of the flash + * @retval None + */ +static void FLASH_OB_PCROP1BConfig(uint32_t PCROP1BStartAddr, uint32_t PCROP1BEndAddr) +{ + uint32_t startoffset; + uint32_t endoffset; + uint32_t ropbase; + +#if defined(FLASH_DBANK_SUPPORT) + /* Check if banks are swapped (valid if only one bank) */ + if (((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != FLASH_OPTR_nSWAP_BANK) && (FLASH_BANK_NB == 2U)) + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP1BStartAddr)); + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP1BEndAddr)); + + /* Bank swap, bank 1 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else +#endif /* FLASH_DBANK_SUPPORT */ + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP1BStartAddr)); + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP1BEndAddr)); + + /* No Bank swap, bank 1 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + /* Configure the Proprietary code readout protection offset */ + startoffset = ((PCROP1BStartAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + endoffset = ((PCROP1BEndAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + + /* Set Zone B start offset */ + FLASH->PCROP1BSR = startoffset; + /* Set Zone B end offset */ + FLASH->PCROP1BER = endoffset; +} + +/** + * @brief Return the FLASH PCROP Protection Option Bytes value. + * @param PCROPConfig [out] specifies the configuration of PCROP_RDP option. + * @param PCROP1AStartAddr [out] Specifies the address where to copied the start address + * of the 1A Proprietary code readout protection + * @param PCROP1AEndAddr [out] Specifies the address where to copied the end address of + * the 1A Proprietary code readout protection + * @retval None + */ +static void FLASH_OB_GetPCROP1A(uint32_t *PCROPConfig, uint32_t *PCROP1AStartAddr, uint32_t *PCROP1AEndAddr) +{ + uint32_t pcrop; + uint32_t ropbase; + +#if defined(FLASH_DBANK_SUPPORT) + /* Check if banks are swapped (valid if only one bank) */ + if (((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != FLASH_OPTR_nSWAP_BANK) && (FLASH_BANK_NB == 2U)) + { + /* Bank swap, bank 1 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else +#endif /* FLASH_DBANK_SUPPORT */ + { + /* No Bank swap, bank 1 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + pcrop = (FLASH->PCROP1ASR & FLASH_PCROP1ASR_PCROP1A_STRT); + *PCROP1AStartAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP1AStartAddr += ropbase; + + pcrop = FLASH->PCROP1AER; + *PCROP1AEndAddr = ((pcrop & FLASH_PCROP1AER_PCROP1A_END) << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP1AEndAddr += (ropbase + FLASH_PCROP_GRANULARITY - 1U); + + *PCROPConfig &= ~OB_PCROP_RDP_ERASE; + *PCROPConfig |= (pcrop & FLASH_PCROP1AER_PCROP_RDP); +} + +/** + * @brief Return the FLASH PCROP Protection Option Bytes value. + * @param PCROP1BStartAddr [out] Specifies the address where to copied the start address + * of the 1B Proprietary code readout protection + * @param PCROP1BEndAddr [out] Specifies the address where to copied the end address of + * the 1B Proprietary code readout protection + * @retval None + */ +static void FLASH_OB_GetPCROP1B(uint32_t *PCROP1BStartAddr, uint32_t *PCROP1BEndAddr) +{ + uint32_t pcrop; + uint32_t ropbase; + +#if defined(FLASH_DBANK_SUPPORT) + /* Check if banks are swapped (valid if only one bank) */ + if (((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != FLASH_OPTR_nSWAP_BANK) && (FLASH_BANK_NB == 2U)) + { + /* Bank swap, bank 1 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else +#endif /* FLASH_DBANK_SUPPORT */ + { + /* No Bank swap, bank 1 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + pcrop = (FLASH->PCROP1BSR & FLASH_PCROP1BSR_PCROP1B_STRT); + *PCROP1BStartAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP1BStartAddr += ropbase; + + pcrop = (FLASH->PCROP1BER & FLASH_PCROP1BER_PCROP1B_END); + *PCROP1BEndAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP1BEndAddr += (ropbase + FLASH_PCROP_GRANULARITY - 1U); +} + +#if defined(FLASH_DBANK_SUPPORT) +/** + * @brief Configure the 2A Proprietary code readout protection. + * @note It is recommended to align PCROP zone with page granularity when using PCROP_RDP or avoid + * having some executable code in a page where PCROP zone starts or ends. + * @note Minimum PCROP area size is 2 times the chosen granularity: PCROPA_STRT and PCROPA_END. + * So if the requirement is to be able to read-protect 1KB areas, the ROP granularity + * has to be set to 512 Bytes + * @param PCROP2AStartAddr Specifies the Zone 2A Start address of the Proprietary code readout protection + * This parameter can be an address between begin and end of the flash + * @param PCROP2AEndAddr Specifies the Zone 2A end address of the Proprietary code readout protection + * This parameter can be an address between PCROP2AStartAddr and end of the flash + * @retval None + */ +static void FLASH_OB_PCROP2AConfig(uint32_t PCROP2AStartAddr, uint32_t PCROP2AEndAddr) +{ + uint32_t startoffset; + uint32_t endoffset; + uint32_t ropbase; + + /* Check if banks are swapped */ + if ((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != 0x00u) + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP2AStartAddr)); + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP2AEndAddr)); + + /* No Bank swap, bank 2 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP2AStartAddr)); + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP2AEndAddr)); + + /* Bank swap, bank 2 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + /* Configure the Proprietary code readout protection offset */ + startoffset = ((PCROP2AStartAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + endoffset = ((PCROP2AEndAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + + /* Set Zone A start offset */ + FLASH->PCROP2ASR = startoffset; + /* Set Zone A end offset */ + FLASH->PCROP2AER = endoffset; +} + +/** + * @brief Configure the 2B Proprietary code readout protection. + * @note It is recommended to align PCROP zone with page granularity when using PCROP_RDP or avoid + * having some executable code in a page where PCROP zone starts or ends. + * @note Minimum PCROP area size is 2 times the chosen granularity: PCROP_STRT and PCROP_END. + * So if the requirement is to be able to read-protect 1KB areas, the ROP granularity + * has to be set to 512 Bytes + * @param PCROP2BStartAddr Specifies the Zone 2B Start address of the Proprietary code readout protection + * This parameter can be an address between begin and end of the flash + * @param PCROP2BEndAddr Specifies the Zone 2B end address of the Proprietary code readout protection + * This parameter can be an address between PCROP2BStartAddr and end of the flash + * @retval None + */ +static void FLASH_OB_PCROP2BConfig(uint32_t PCROP2BStartAddr, uint32_t PCROP2BEndAddr) +{ + uint32_t startoffset; + uint32_t endoffset; + uint32_t ropbase; + + /* Check if banks are swapped */ + if ((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != 0x00u) + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP2BStartAddr)); + assert_param(IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(PCROP2BEndAddr)); + + /* No Bank swap, bank 2 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else + { + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP2BStartAddr)); + assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP2BEndAddr)); + + /* Bank swap, bank 2 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + /* Configure the Proprietary code readout protection offset */ + startoffset = ((PCROP2BStartAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + endoffset = ((PCROP2BEndAddr - ropbase) >> FLASH_PCROP_GRANULARITY_OFFSET); + + /* Set Zone B start offset */ + FLASH->PCROP2BSR = startoffset; + /* Set Zone B end offset */ + FLASH->PCROP2BER = endoffset; +} + +/** + * @brief Return the FLASH PCROP Protection Option Bytes value. + * @param PCROP2AStartAddr [out] Specifies the address where to copied the start address + * of the 2A Proprietary code readout protection + * @param PCROP2AEndAddr [out] Specifies the address where to copied the end address of + * the 2A Proprietary code readout protection + * @retval None + */ +static void FLASH_OB_GetPCROP2A(uint32_t *PCROP2AStartAddr, uint32_t *PCROP2AEndAddr) +{ + uint32_t pcrop; + uint32_t ropbase; + + /* Check if banks are swapped */ + if ((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != 0x00u) + { + /* No Bank swap, bank 2 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else + { + /* Bank swap, bank 2 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + pcrop = (FLASH->PCROP2ASR & FLASH_PCROP2ASR_PCROP2A_STRT); + *PCROP2AStartAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP2AStartAddr += ropbase; + + pcrop = (FLASH->PCROP2AER & FLASH_PCROP2AER_PCROP2A_END); + *PCROP2AEndAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP2AEndAddr += (ropbase + FLASH_PCROP_GRANULARITY - 1U); +} + +/** + * @brief Return the FLASH PCROP Protection Option Bytes value. + * @param PCROP2BStartAddr [out] Specifies the address where to copied the start address + * of the 2B Proprietary code readout protection + * @param PCROP2BEndAddr [out] Specifies the address where to copied the end address of + * the 2B Proprietary code readout protection + * @retval None + */ +static void FLASH_OB_GetPCROP2B(uint32_t *PCROP2BStartAddr, uint32_t *PCROP2BEndAddr) +{ + uint32_t pcrop; + uint32_t ropbase; + + /* Check if banks are swapped */ + if ((FLASH->OPTR & FLASH_OPTR_nSWAP_BANK) != 0x00u) + { + /* No Bank swap, bank 2 read only protection is on second half of Flash */ + ropbase = (FLASH_BASE + FLASH_BANK_SIZE); + } + else + { + /* Bank swap, bank 2 read only protection is on first half of Flash */ + ropbase = FLASH_BASE; + } + + pcrop = (FLASH->PCROP2BSR & FLASH_PCROP2BSR_PCROP2B_STRT); + *PCROP2BStartAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP2BStartAddr += ropbase; + + pcrop = (FLASH->PCROP2BER & FLASH_PCROP2BER_PCROP2B_END); + *PCROP2BEndAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP2BEndAddr += (ropbase + FLASH_PCROP_GRANULARITY - 1U); +} +#endif /* FLASH_DBANK_SUPPORT */ +#endif /* FLASH_PCROP_SUPPORT */ + +#if defined(FLASH_SECURABLE_MEMORY_SUPPORT) +#if defined(FLASH_DBANK_SUPPORT) +/** + * @brief Configure Securable Memory area feature. + * @param BootEntry specifies if boot scheme is forced to Flash (System or user) or not + * This parameter can be one of the following values: + * @arg @ref OB_BOOT_ENTRY_FORCED_NONE No boot entry forced + * @arg @ref OB_BOOT_ENTRY_FORCED_FLASH Flash selected as unique entry boot + * @param SecSize specifies number of pages to protect as securable memory area, starting from + * beginning of Bank1 (page 0). + * @param SecSize2 specifies number of pages to protect as securable memory area, starting from + * beginning of Bank2 (page 0). + * @retval None + */ +static void FLASH_OB_SecMemConfig(uint32_t BootEntry, uint32_t SecSize, uint32_t SecSize2) +{ + uint32_t secmem; + + /* Check the parameters */ + assert_param(IS_OB_SEC_BOOT_LOCK(BootEntry)); + assert_param(IS_OB_SEC_SIZE(SecSize)); + + if ((FLASH_BANK_NB == 2U)) + { + assert_param(IS_OB_SEC_SIZE(SecSize2)); + } + + /* Set securable memory area configuration */ + secmem = (FLASH->SECR & ~(FLASH_SECR_BOOT_LOCK | FLASH_SECR_SEC_SIZE | FLASH_SECR_SEC_SIZE2)); + FLASH->SECR = (secmem | BootEntry | SecSize | (SecSize2 << FLASH_SECR_SEC_SIZE2_Pos)); +} + +/** + * @brief Return the FLASH Securable memory area protection Option Bytes value. + * @param BootEntry specifies boot scheme configuration + * @param SecSize specifies number of pages to protect as secure memory area, starting from + * beginning of Bank1 (page 0). + * @param SecSize2 specifies number of pages to protect as secure memory area, starting from + * beginning of Bank2 (page 0). + * @retval None + */ +static void FLASH_OB_GetSecMem(uint32_t *BootEntry, uint32_t *SecSize, uint32_t *SecSize2) +{ + uint32_t secmem = FLASH->SECR; + + *BootEntry = (secmem & FLASH_SECR_BOOT_LOCK); + *SecSize = (secmem & FLASH_SECR_SEC_SIZE); + *SecSize2 = (secmem & FLASH_SECR_SEC_SIZE2) >> FLASH_SECR_SEC_SIZE2_Pos; +} + +#else +/** + * @brief Configure Securable Memory area feature. + * @param BootEntry specifies if boot scheme is forced to Flash (System or user) or not + * This parameter can be one of the following values: + * @arg @ref OB_BOOT_ENTRY_FORCED_NONE No boot entry forced + * @arg @ref OB_BOOT_ENTRY_FORCED_FLASH FLash selected as unique entry boot + * @param SecSize specifies number of pages to protect as securable memory area, starting from + * beginning of the Flash (page 0). + * @retval None + */ +static void FLASH_OB_SecMemConfig(uint32_t BootEntry, uint32_t SecSize) +{ + uint32_t secmem; + + /* Check the parameters */ + assert_param(IS_OB_SEC_BOOT_LOCK(BootEntry)); + assert_param(IS_OB_SEC_SIZE(SecSize)); + + /* Set securable memory area configuration */ + secmem = (FLASH->SECR & ~(FLASH_SECR_BOOT_LOCK | FLASH_SECR_SEC_SIZE)); + FLASH->SECR = (secmem | BootEntry | SecSize); +} + +/** + * @brief Return the FLASH Securable memory area protection Option Bytes value. + * @param BootEntry specifies boot scheme configuration + * @param SecSize specifies number of pages to protect as secure memory area, starting from + * beginning of the Flash (page 0). + * @retval None + */ +static void FLASH_OB_GetSecMem(uint32_t *BootEntry, uint32_t *SecSize) +{ + uint32_t secmem = FLASH->SECR; + + *BootEntry = (secmem & FLASH_SECR_BOOT_LOCK); + *SecSize = (secmem & FLASH_SECR_SEC_SIZE); +} +#endif /* FLASH_DBANK_SUPPORT */ +#endif /* FLASH_SECURABLE_MEMORY_SUPPORT */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c new file mode 100644 index 0000000..4b4cc8a --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c @@ -0,0 +1,550 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_gpio.c + * @author MCD Application Team + * @brief GPIO HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (GPIO) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### GPIO Peripheral features ##### + ============================================================================== + [..] + (+) Each port bit of the general-purpose I/O (GPIO) ports can be individually + configured by software in several modes: + (++) Input mode + (++) Analog mode + (++) Output mode + (++) Alternate function mode + (++) External interrupt/event lines + + (+) During and just after reset, the alternate functions and external interrupt + lines are not active and the I/O ports are configured in input floating mode. + + (+) All GPIO pins have weak internal pull-up and pull-down resistors, which can be + activated or not. + + (+) In Output or Alternate mode, each IO can be configured on open-drain or push-pull + type and the IO speed can be selected depending on the VDD value. + + (+) The microcontroller IO pins are connected to onboard peripherals/modules through a + multiplexer that allows only one peripheral alternate function (AF) connected + to an IO pin at a time. In this way, there can be no conflict between peripherals + sharing the same IO pin. + + (+) All ports have external interrupt/event capability. To use external interrupt + lines, the port must be configured in input mode. All available GPIO pins are + connected to the 16 external interrupt/event lines from EXTI0 to EXTI15. + + (+) The external interrupt/event controller consists of up to 28 edge detectors + (16 lines are connected to GPIO) for generating event/interrupt requests (each + input line can be independently configured to select the type (interrupt or event) + and the corresponding trigger event (rising or falling or both). Each line can + also be masked independently. + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE(). + + (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). + (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure + (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef + structure. + (++) In case of Output or alternate function mode selection: the speed is + configured through "Speed" member from GPIO_InitTypeDef structure. + (++) In alternate mode is selection, the alternate function connected to the IO + is configured through "Alternate" member from GPIO_InitTypeDef structure. + (++) Analog mode is required when a pin is to be used as ADC channel + or DAC output. + (++) In case of external interrupt/event selection the "Mode" member from + GPIO_InitTypeDef structure select the type (interrupt or event) and + the corresponding trigger event (rising or falling or both). + + (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority + mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using + HAL_NVIC_EnableIRQ(). + + (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). + + (#) To set/reset the level of a pin configured in output mode use + HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). + + (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). + + (#) During and just after reset, the alternate functions are not + active and the GPIO pins are configured in input floating mode (except JTAG + pins). + + (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose + (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has + priority over the GPIO function. + + (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as + general purpose PF0 and PF1, respectively, when the HSE oscillator is off. + The HSE has priority over the GPIO function. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup GPIO + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rules: + * Rule-12.2 - Medium: RHS argument is in interval [0,INF] which is out of + * range of the shift operator in following API : + * HAL_GPIO_Init + * HAL_GPIO_DeInit + */ + +#ifdef HAL_GPIO_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines ------------------------------------------------------------*/ +/** @addtogroup GPIO_Private_Constants + * @{ + */ +#define GPIO_NUMBER (16u) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup GPIO_Exported_Functions + * @{ + */ + +/** @addtogroup GPIO_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the GPIOx peripheral according to the specified parameters in the GPIO_Init. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family + * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) +{ + uint32_t position = 0x00u; + uint32_t iocurrent; + uint32_t temp; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); + assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); + + /* Configure the port pins */ + while (((GPIO_Init->Pin) >> position) != 0x00u) + { + /* Get current io position */ + iocurrent = (GPIO_Init->Pin) & (1uL << position); + + if (iocurrent != 0x00u) + { + /*--------------------- GPIO Mode Configuration ------------------------*/ + /* In case of Output or Alternate function mode selection */ + if (((GPIO_Init->Mode & GPIO_MODE) == MODE_OUTPUT) || ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF)) + { + /* Check the Speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + + /* Configure the IO Speed */ + temp = GPIOx->OSPEEDR; + temp &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u)); + temp |= (GPIO_Init->Speed << (position * 2u)); + GPIOx->OSPEEDR = temp; + + /* Configure the IO Output Type */ + temp = GPIOx->OTYPER; + temp &= ~(GPIO_OTYPER_OT0 << position) ; + temp |= (((GPIO_Init->Mode & OUTPUT_TYPE) >> OUTPUT_TYPE_Pos) << position); + GPIOx->OTYPER = temp; + } + + if ((GPIO_Init->Mode & GPIO_MODE) != MODE_ANALOG) + { + /* Check the Pull parameter */ + assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); + + /* Activate the Pull-up or Pull down resistor for the current IO */ + temp = GPIOx->PUPDR; + temp &= ~(GPIO_PUPDR_PUPD0 << (position * 2u)); + temp |= ((GPIO_Init->Pull) << (position * 2u)); + GPIOx->PUPDR = temp; + } + + /* In case of Alternate function mode selection */ + if ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF) + { + /* Check the Alternate function parameters */ + assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); + assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); + + /* Configure Alternate function mapped with the current IO */ + temp = GPIOx->AFR[position >> 3u]; + temp &= ~(0xFu << ((position & 0x07u) * 4u)); + temp |= ((GPIO_Init->Alternate) << ((position & 0x07u) * 4u)); + GPIOx->AFR[position >> 3u] = temp; + } + + /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ + temp = GPIOx->MODER; + temp &= ~(GPIO_MODER_MODE0 << (position * 2u)); + temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2u)); + GPIOx->MODER = temp; + + /*--------------------- EXTI Mode Configuration ------------------------*/ + /* Configure the External Interrupt or event for the current IO */ + if ((GPIO_Init->Mode & EXTI_MODE) != 0x00u) + { + temp = EXTI->EXTICR[position >> 2u]; + temp &= ~(0x0FuL << (8u * (position & 0x03u))); + temp |= (GPIO_GET_INDEX(GPIOx) << (8u * (position & 0x03u))); + EXTI->EXTICR[position >> 2u] = temp; + + /* Clear Rising Falling edge configuration */ + temp = EXTI->RTSR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & TRIGGER_RISING) != 0x00u) + { + temp |= iocurrent; + } + EXTI->RTSR1 = temp; + + temp = EXTI->FTSR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & TRIGGER_FALLING) != 0x00u) + { + temp |= iocurrent; + } + EXTI->FTSR1 = temp; + + /* Clear EXTI line configuration */ + temp = EXTI->EMR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & EXTI_EVT) != 0x00u) + { + temp |= iocurrent; + } + EXTI->EMR1 = temp; + + temp = EXTI->IMR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & EXTI_IT) != 0x00u) + { + temp |= iocurrent; + } + EXTI->IMR1 = temp; + } + } + + position++; + } +} + +/** + * @brief De-initialize the GPIOx peripheral registers to their default reset values. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) +{ + uint32_t position = 0x00u; + uint32_t iocurrent; + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Configure the port pins */ + while ((GPIO_Pin >> position) != 0x00u) + { + /* Get current io position */ + iocurrent = (GPIO_Pin) & (1uL << position); + + if (iocurrent != 0x00u) + { + /*------------------------- EXTI Mode Configuration --------------------*/ + /* Clear the External Interrupt or Event for the current IO */ + + tmp = EXTI->EXTICR[position >> 2u]; + tmp &= (0x0FuL << (8u * (position & 0x03u))); + if (tmp == (GPIO_GET_INDEX(GPIOx) << (8u * (position & 0x03u)))) + { + /* Clear EXTI line configuration */ + EXTI->IMR1 &= ~(iocurrent); + EXTI->EMR1 &= ~(iocurrent); + + /* Clear Rising Falling edge configuration */ + EXTI->FTSR1 &= ~(iocurrent); + EXTI->RTSR1 &= ~(iocurrent); + + tmp = 0x0FuL << (8u * (position & 0x03u)); + EXTI->EXTICR[position >> 2u] &= ~tmp; + } + + /*------------------------- GPIO Mode Configuration --------------------*/ + /* Configure IO in Analog Mode */ + GPIOx->MODER |= (GPIO_MODER_MODE0 << (position * 2u)); + + /* Configure the default Alternate Function in current IO */ + GPIOx->AFR[position >> 3u] &= ~(0xFu << ((position & 0x07u) * 4u)) ; + + /* Configure the default value for IO Speed */ + GPIOx->OSPEEDR &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u)); + + /* Configure the default value IO Output Type */ + GPIOx->OTYPER &= ~(GPIO_OTYPER_OT0 << position) ; + + /* Deactivate the Pull-up and Pull-down resistor for the current IO */ + GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPD0 << (position * 2u)); + } + + position++; + } +} + +/** + * @} + */ + +/** @addtogroup GPIO_Exported_Functions_Group2 + * @brief GPIO Read, Write, Toggle, Lock and EXTI management functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Read the specified input port pin. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family + * @param GPIO_Pin specifies the port bit to read. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval The input port pin value. + */ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + GPIO_PinState bitstatus; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != 0x00u) + { + bitstatus = GPIO_PIN_SET; + } + else + { + bitstatus = GPIO_PIN_RESET; + } + return bitstatus; +} + +/** + * @brief Set or clear the selected data port bit. + * + * @note This function uses GPIOx_BSRR and GPIOx_BRR registers to allow atomic read/modify + * accesses. In this way, there is no risk of an IRQ occurring between + * the read and the modify access. + * + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @param PinState specifies the value to be written to the selected bit. + * This parameter can be one of the GPIO_PinState enum values: + * @arg GPIO_PIN_RESET: to clear the port pin + * @arg GPIO_PIN_SET: to set the port pin + * @retval None + */ +void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) +{ + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_PIN_ACTION(PinState)); + + if (PinState != GPIO_PIN_RESET) + { + GPIOx->BSRR = (uint32_t)GPIO_Pin; + } + else + { + GPIOx->BRR = (uint32_t)GPIO_Pin; + } +} + +/** + * @brief Toggle the specified GPIO pin. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family + * @param GPIO_Pin specifies the pin to be toggled. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + uint32_t odr; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* get current Output Data Register value */ + odr = GPIOx->ODR; + + /* Set selected pins that were at low level, and reset ones that were high */ + GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin); +} + +/** +* @brief Lock GPIO Pins configuration registers. + * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, + * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. + * @note The configuration of the locked GPIO pins can no longer be modified + * until the next reset. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32G0xx family + * @param GPIO_Pin specifies the port bits to be locked. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + __IO uint32_t tmp = GPIO_LCKR_LCKK; + + /* Check the parameters */ + assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Apply lock key write sequence */ + tmp |= GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Read LCKK register. This read is mandatory to complete key lock sequence */ + tmp = GPIOx->LCKR; + + /* read again in order to confirm lock is active */ + if ((GPIOx->LCKR & GPIO_LCKR_LCKK) != 0x00u) + { + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Handle EXTI interrupt request. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin) +{ + /* EXTI line interrupt detected */ + if (__HAL_GPIO_EXTI_GET_RISING_IT(GPIO_Pin) != 0x00u) + { + __HAL_GPIO_EXTI_CLEAR_RISING_IT(GPIO_Pin); + HAL_GPIO_EXTI_Rising_Callback(GPIO_Pin); + } + + if (__HAL_GPIO_EXTI_GET_FALLING_IT(GPIO_Pin) != 0x00u) + { + __HAL_GPIO_EXTI_CLEAR_FALLING_IT(GPIO_Pin); + HAL_GPIO_EXTI_Falling_Callback(GPIO_Pin); + } +} + +/** + * @brief EXTI line detection callback. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +__weak void HAL_GPIO_EXTI_Rising_Callback(uint16_t GPIO_Pin) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(GPIO_Pin); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_GPIO_EXTI_Rising_Callback could be implemented in the user file + */ +} + +/** + * @brief EXTI line detection callback. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +__weak void HAL_GPIO_EXTI_Falling_Callback(uint16_t GPIO_Pin) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(GPIO_Pin); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_GPIO_EXTI_Falling_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + + +/** + * @} + */ + +#endif /* HAL_GPIO_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c.c new file mode 100644 index 0000000..7107a41 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c.c @@ -0,0 +1,7478 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_i2c.c + * @author MCD Application Team + * @brief I2C HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Inter Integrated Circuit (I2C) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The I2C HAL driver can be used as follows: + + (#) Declare a I2C_HandleTypeDef handle structure, for example: + I2C_HandleTypeDef hi2c; + + (#)Initialize the I2C low level resources by implementing the HAL_I2C_MspInit() API: + (##) Enable the I2Cx interface clock + (##) I2C pins configuration + (+++) Enable the clock for the I2C GPIOs + (+++) Configure I2C pins as alternate function open-drain + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the I2Cx interrupt priority + (+++) Enable the NVIC I2C IRQ Channel + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for + the transmit or receive channel + (+++) Enable the DMAx interface clock using + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx channel + (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on + the DMA Tx or Rx channel + + (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode, + Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure. + + (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware + (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit(&hi2c) API. + + (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady() + + (#) For I2C IO and IO MEM operations, three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit() + (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive() + (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit() + (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive() + + *** Polling mode IO MEM operation *** + ===================================== + [..] + (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write() + (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read() + + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Transmit_IT() + (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Receive_IT() + (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Transmit_IT() + (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Receive_IT() + (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + + *** Interrupt mode or DMA mode IO sequential operation *** + ========================================================== + [..] + (@) These interfaces allow to manage a sequential transfer with a repeated start condition + when a direction change during transfer + [..] + (+) A specific option field manage the different steps of a sequential transfer + (+) Option field values are defined through I2C_XFEROPTIONS and are listed below: + (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in + no sequential mode + (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address + and data to transfer without a final stop condition + (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with + start condition, address and data to transfer without a final stop condition, + an then permit a call the same master sequential interface several times + (like HAL_I2C_Master_Seq_Transmit_IT() then HAL_I2C_Master_Seq_Transmit_IT() + or HAL_I2C_Master_Seq_Transmit_DMA() then HAL_I2C_Master_Seq_Transmit_DMA()) + (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to + transfer + if no direction change and without a final stop condition in both cases + (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to + transfer + if no direction change and with a final stop condition in both cases + (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition + after several call of the same master sequential interface several times + (link with option I2C_FIRST_AND_NEXT_FRAME). + Usage can, transfer several bytes one by one using + HAL_I2C_Master_Seq_Transmit_IT + or HAL_I2C_Master_Seq_Receive_IT + or HAL_I2C_Master_Seq_Transmit_DMA + or HAL_I2C_Master_Seq_Receive_DMA + with option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME. + Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or + Receive sequence permit to call the opposite interface Receive or Transmit + without stopping the communication and so generate a restart condition. + (++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after + each call of the same master sequential + interface. + Usage can, transfer several bytes one by one with a restart with slave address between + each bytes using + HAL_I2C_Master_Seq_Transmit_IT + or HAL_I2C_Master_Seq_Receive_IT + or HAL_I2C_Master_Seq_Transmit_DMA + or HAL_I2C_Master_Seq_Receive_DMA + with option I2C_FIRST_FRAME then I2C_OTHER_FRAME. + Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic + generation of STOP condition. + + (+) Different sequential I2C interfaces are listed below: + (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using + HAL_I2C_Master_Seq_Transmit_IT() or using HAL_I2C_Master_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, HAL_I2C_MasterTxCpltCallback() is executed and + users can add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using + HAL_I2C_Master_Seq_Receive_IT() or using HAL_I2C_Master_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (++) Abort a master IT or DMA I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (++) Enable/disable the Address listen mode in slave I2C mode using HAL_I2C_EnableListen_IT() + HAL_I2C_DisableListen_IT() + (+++) When address slave I2C match, HAL_I2C_AddrCallback() is executed and users can + add their own code to check the Address Match Code and the transmission direction request by master + (Write/Read). + (+++) At Listen mode end HAL_I2C_ListenCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_ListenCpltCallback() + (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using + HAL_I2C_Slave_Seq_Transmit_IT() or using HAL_I2C_Slave_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, HAL_I2C_SlaveTxCpltCallback() is executed and + users can add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using + HAL_I2C_Slave_Seq_Receive_IT() or using HAL_I2C_Slave_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (++) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (++) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** Interrupt mode IO MEM operation *** + ======================================= + [..] + (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using + HAL_I2C_Mem_Write_IT() + (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using + HAL_I2C_Mem_Read_IT() + (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Master_Transmit_DMA() + (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Master_Receive_DMA() + (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Slave_Transmit_DMA() + (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Slave_Receive_DMA() + (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** DMA mode IO MEM operation *** + ================================= + [..] + (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using + HAL_I2C_Mem_Write_DMA() + (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using + HAL_I2C_Mem_Read_DMA() + (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + + + *** I2C HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in I2C HAL driver. + + (+) __HAL_I2C_ENABLE: Enable the I2C peripheral + (+) __HAL_I2C_DISABLE: Disable the I2C peripheral + (+) __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode + (+) __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not + (+) __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag + (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt + (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt + + *** Callback registration *** + ============================================= + [..] + The compilation flag USE_HAL_I2C_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_I2C_RegisterCallback() or HAL_I2C_RegisterAddrCallback() + to register an interrupt callback. + [..] + Function HAL_I2C_RegisterCallback() allows to register following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + For specific callback AddrCallback use dedicated register callbacks : HAL_I2C_RegisterAddrCallback(). + [..] + Use function HAL_I2C_UnRegisterCallback to reset a callback to the default + weak function. + HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + [..] + For callback AddrCallback use dedicated register callbacks : HAL_I2C_UnRegisterAddrCallback(). + [..] + By default, after the HAL_I2C_Init() and when the state is HAL_I2C_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_I2C_MasterTxCpltCallback(), HAL_I2C_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_I2C_Init()/ HAL_I2C_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_I2C_Init()/ HAL_I2C_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + Callbacks can be registered/unregistered in HAL_I2C_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_I2C_STATE_READY or HAL_I2C_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_I2C_RegisterCallback() before calling HAL_I2C_DeInit() + or HAL_I2C_Init() function. + [..] + When the compilation flag USE_HAL_I2C_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + [..] + (@) You can refer to the I2C HAL driver header file for more useful macros + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup I2C I2C + * @brief I2C HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup I2C_Private_Define I2C Private Define + * @{ + */ +#define TIMING_CLEAR_MASK (0xF0FFFFFFU) /*!< I2C TIMING clear register Mask */ +#define I2C_TIMEOUT_ADDR (10000U) /*!< 10 s */ +#define I2C_TIMEOUT_BUSY (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_DIR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_RXNE (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_STOPF (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TC (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TCR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TXIS (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_FLAG (25U) /*!< 25 ms */ + +#define MAX_NBYTE_SIZE 255U +#define SLAVE_ADDR_SHIFT 7U +#define SLAVE_ADDR_MSK 0x06U + +/* Private define for @ref PreviousState usage */ +#define I2C_STATE_MSK ((uint32_t)((uint32_t)((uint32_t)HAL_I2C_STATE_BUSY_TX | \ + (uint32_t)HAL_I2C_STATE_BUSY_RX) & \ + (uint32_t)(~((uint32_t)HAL_I2C_STATE_READY)))) +/*!< Mask State define, keep only RX and TX bits */ +#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) +/*!< Default Value */ +#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MASTER)) +/*!< Master Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MASTER)) +/*!< Master Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_SLAVE)) +/*!< Slave Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_SLAVE)) +/*!< Slave Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MEM)) +/*!< Memory Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MEM)) +/*!< Memory Busy RX, combinaison of State LSB and Mode enum */ + + +/* Private define to centralize the enable/disable of Interrupts */ +#define I2C_XFER_TX_IT (uint16_t)(0x0001U) /*!< Bit field can be combinated with + @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_RX_IT (uint16_t)(0x0002U) /*!< Bit field can be combinated with + @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_LISTEN_IT (uint16_t)(0x8000U) /*!< Bit field can be combinated with @ref I2C_XFER_TX_IT + and @ref I2C_XFER_RX_IT */ + +#define I2C_XFER_ERROR_IT (uint16_t)(0x0010U) /*!< Bit definition to manage addition of global Error + and NACK treatment */ +#define I2C_XFER_CPLT_IT (uint16_t)(0x0020U) /*!< Bit definition to manage only STOP evenement */ +#define I2C_XFER_RELOAD_IT (uint16_t)(0x0040U) /*!< Bit definition to manage only Reload of NBYTE */ + +/* Private define Sequential Transfer Options default/reset value */ +#define I2C_NO_OPTION_FRAME (0xFFFF0000U) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup I2C_Private_Macro + * @{ + */ +/* Macro to get remaining data to transfer on DMA side */ +#define I2C_GET_DMA_REMAIN_DATA(__HANDLE__) __HAL_DMA_GET_COUNTER(__HANDLE__) +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions to handle DMA transfer */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAError(DMA_HandleTypeDef *hdma); +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma); + + +/* Private functions to handle IT transfer */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode); + +/* Private functions to handle IT transfer */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart); + +/* Private functions for I2C transfer IRQ handler */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Mem_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Mem_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); + +/* Private functions to handle flags during polling transfer */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_IsErrorOccurred(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); + +/* Private functions to centralize the enable/disable of Interrupts */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); + +/* Private function to treat different error callback */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c); + +/* Private function to flush TXDR register */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c); + +/* Private function to handle start, restart or stop a transfer */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, + uint32_t Request); + +/* Private function to Convert Specific options */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the I2Cx peripheral: + + (+) User must Implement HAL_I2C_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_I2C_Init() to configure the selected device with + the selected configuration: + (++) Clock Timing + (++) Own Address 1 + (++) Addressing mode (Master, Slave) + (++) Dual Addressing mode + (++) Own Address 2 + (++) Own Address 2 Mask + (++) General call mode + (++) Nostretch mode + + (+) Call the function HAL_I2C_DeInit() to restore the default configuration + of the selected I2Cx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the I2C according to the specified parameters + * in the I2C_InitTypeDef and initialize the associated handle. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1)); + assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode)); + assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode)); + assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2)); + assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks)); + assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode)); + assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode)); + + if (hi2c->State == HAL_I2C_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hi2c->Lock = HAL_UNLOCKED; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + /* Init the I2C Callback settings */ + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + + if (hi2c->MspInitCallback == NULL) + { + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + hi2c->MspInitCallback(hi2c); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_I2C_MspInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /*---------------------------- I2Cx TIMINGR Configuration ------------------*/ + /* Configure I2Cx: Frequency range */ + hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK; + + /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ + /* Disable Own Address1 before set the Own Address1 configuration */ + hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN; + + /* Configure I2Cx: Own Address1 and ack own address1 mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1); + } + else /* I2C_ADDRESSINGMODE_10BIT */ + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1); + } + + /*---------------------------- I2Cx CR2 Configuration ----------------------*/ + /* Configure I2Cx: Addressing Master mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + SET_BIT(hi2c->Instance->CR2, I2C_CR2_ADD10); + } + else + { + /* Clear the I2C ADD10 bit */ + CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_ADD10); + } + /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */ + hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK); + + /*---------------------------- I2Cx OAR2 Configuration ---------------------*/ + /* Disable Own Address2 before set the Own Address2 configuration */ + hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE; + + /* Configure I2Cx: Dual mode and Own Address2 */ + hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | \ + (hi2c->Init.OwnAddress2Masks << 8)); + + /*---------------------------- I2Cx CR1 Configuration ----------------------*/ + /* Configure I2Cx: Generalcall and NoStretch mode */ + hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode); + + /* Enable the selected I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + return HAL_OK; +} + +/** + * @brief DeInitialize the I2C peripheral. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the I2C Peripheral Clock */ + __HAL_I2C_DISABLE(hi2c); + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + if (hi2c->MspDeInitCallback == NULL) + { + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + hi2c->MspDeInitCallback(hi2c); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_I2C_MspDeInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_RESET; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Initialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User I2C Callback + * To be used instead of the weak predefined callback + * @note The HAL_I2C_RegisterCallback() may be called before HAL_I2C_Init() in HAL_I2C_STATE_RESET + * to register callbacks for HAL_I2C_MSPINIT_CB_ID and HAL_I2C_MSPDEINIT_CB_ID. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, + pI2C_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = pCallback; + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = pCallback; + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = pCallback; + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = pCallback; + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = pCallback; + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an I2C Callback + * I2C callback is redirected to the weak predefined callback + * @note The HAL_I2C_UnRegisterCallback() may be called before HAL_I2C_Init() in HAL_I2C_STATE_RESET + * to un-register callbacks for HAL_I2C_MSPINIT_CB_ID and HAL_I2C_MSPDEINIT_CB_ID. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register the Slave Address Match I2C Callback + * To be used instead of the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pCallback pointer to the Address Match Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = pCallback; + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Slave Address Match I2C Callback + * Info Ready I2C Callback is redirected to the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2C data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2C_Master_Transmit() + (++) HAL_I2C_Master_Receive() + (++) HAL_I2C_Slave_Transmit() + (++) HAL_I2C_Slave_Receive() + (++) HAL_I2C_Mem_Write() + (++) HAL_I2C_Mem_Read() + (++) HAL_I2C_IsDeviceReady() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2C_Master_Transmit_IT() + (++) HAL_I2C_Master_Receive_IT() + (++) HAL_I2C_Slave_Transmit_IT() + (++) HAL_I2C_Slave_Receive_IT() + (++) HAL_I2C_Mem_Write_IT() + (++) HAL_I2C_Mem_Read_IT() + (++) HAL_I2C_Master_Seq_Transmit_IT() + (++) HAL_I2C_Master_Seq_Receive_IT() + (++) HAL_I2C_Slave_Seq_Transmit_IT() + (++) HAL_I2C_Slave_Seq_Receive_IT() + (++) HAL_I2C_EnableListen_IT() + (++) HAL_I2C_DisableListen_IT() + (++) HAL_I2C_Master_Abort_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2C_Master_Transmit_DMA() + (++) HAL_I2C_Master_Receive_DMA() + (++) HAL_I2C_Slave_Transmit_DMA() + (++) HAL_I2C_Slave_Receive_DMA() + (++) HAL_I2C_Mem_Write_DMA() + (++) HAL_I2C_Mem_Read_DMA() + (++) HAL_I2C_Master_Seq_Transmit_DMA() + (++) HAL_I2C_Master_Seq_Receive_DMA() + (++) HAL_I2C_Slave_Seq_Transmit_DMA() + (++) HAL_I2C_Slave_Seq_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2C_MasterTxCpltCallback() + (++) HAL_I2C_MasterRxCpltCallback() + (++) HAL_I2C_SlaveTxCpltCallback() + (++) HAL_I2C_SlaveRxCpltCallback() + (++) HAL_I2C_MemTxCpltCallback() + (++) HAL_I2C_MemRxCpltCallback() + (++) HAL_I2C_AddrCallback() + (++) HAL_I2C_ListenCpltCallback() + (++) HAL_I2C_ErrorCallback() + (++) HAL_I2C_AbortCpltCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmits in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)(hi2c->XferSize + 1U), xfermode, + I2C_GENERATE_START_WRITE); + } + else + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, + I2C_GENERATE_START_WRITE); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmits in slave mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + uint16_t tmpXferCount; + HAL_StatusTypeDef error; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* If 10bit addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Wait until DIR flag is set Transmitter mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Wait until AF flag is set */ + error = I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, Timeout, tickstart); + + if (error != HAL_OK) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0 */ + + tmpXferCount = hi2c->XferCount; + if ((hi2c->ErrorCode == HAL_I2C_ERROR_AF) && (tmpXferCount == 0U)) + { + /* Reset ErrorCode to NONE */ + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + } + else + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + } + else + { + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Clear AF flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in blocking mode + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Wait until DIR flag is reset Receiver mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Store Last receive data if any */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + if (hi2c->XferSize > 0U) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)(hi2c->XferSize + 1U), xfermode, + I2C_GENERATE_START_WRITE); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, + I2C_GENERATE_START_WRITE); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + uint32_t sizetoxfer = 0U; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + sizetoxfer = hi2c->XferSize; + hi2c->XferCount--; + hi2c->XferSize--; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, + (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)(hi2c->XferSize + 1U), + xfermode, I2C_GENERATE_START_WRITE); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, I2C_AUTOEND_MODE, + I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to read and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + if (hi2c->XferCount != 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, + (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Write an amount of data in blocking mode to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + + do + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + + } while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in blocking mode from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + } + + do + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t) hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->XferSize = 0U; + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_IT; + hi2c->Devaddress = DevAddress; + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_IT; + hi2c->Devaddress = DevAddress; + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_DMA; + hi2c->Devaddress = DevAddress; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_DMA; + hi2c->Devaddress = DevAddress; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Checks if target device is ready for communication. + * @note This function is used with Memory devices + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param Trials Number of trials + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout) +{ + uint32_t tickstart; + + __IO uint32_t I2C_Trials = 0UL; + + FlagStatus tmp1; + FlagStatus tmp2; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + do + { + /* Generate Start */ + hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode, DevAddress); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set or a NACK flag is set*/ + tickstart = HAL_GetTick(); + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + + while ((tmp1 == RESET) && (tmp2 == RESET)) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + } + + /* Check if the NACKF flag has not been set */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Device is ready */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Clear STOP Flag, auto generated with autoend*/ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Increment Trials */ + I2C_Trials++; + } while (I2C_Trials < Trials); + + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + uint32_t sizetoxfer = 0U; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + if ((hi2c->XferSize > 0U) && ((XferOptions == I2C_FIRST_FRAME) || \ + (XferOptions == I2C_FIRST_AND_LAST_FRAME))) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + sizetoxfer = hi2c->XferSize; + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to write */ + if ((XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_FIRST_AND_LAST_FRAME)) + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, xfermode, xferrequest); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with DMA. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + HAL_StatusTypeDef dmaxferstatus; + uint32_t sizetoxfer = 0U; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + if ((hi2c->XferSize > 0U) && ((XferOptions == I2C_FIRST_FRAME) || \ + (XferOptions == I2C_FIRST_AND_LAST_FRAME))) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + sizetoxfer = hi2c->XferSize; + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, + (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to write */ + if ((XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_FIRST_AND_LAST_FRAME)) + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, xfermode, xferrequest); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + } + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + if ((XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_FIRST_AND_LAST_FRAME)) + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, xfermode, xferrequest); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Abort DMA Xfer if any */ + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, + (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Enable the Address Match interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp; + + /* Disable Address listen mode only if a transfer is not ongoing */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK; + hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode); + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Disable the Address Match interrupt */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort a master I2C IT or DMA process communication with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress) +{ + if (hi2c->Mode == HAL_I2C_MODE_MASTER) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Set State at HAL_I2C_STATE_ABORT */ + hi2c->State = HAL_I2C_STATE_ABORT; + + /* Set NBYTES to 1 to generate a dummy read on I2C peripheral */ + /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */ + I2C_TransferConfig(hi2c, DevAddress, 1, I2C_AUTOEND_MODE, I2C_GENERATE_STOP); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + return HAL_OK; + } + else + { + /* Wrong usage of abort function */ + /* This function should be used only in case of abort monitored by master device */ + return HAL_ERROR; + } +} + +/** + * @} + */ + +/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ + +/** + * @brief This function handles I2C event interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) /* Derogation MISRAC2012-Rule-8.13 */ +{ + /* Get current IT Flags and IT sources value */ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + + /* I2C events treatment -------------------------------------*/ + if (hi2c->XferISR != NULL) + { + hi2c->XferISR(hi2c, itflags, itsources); + } +} + +/** + * @brief This function handles I2C error interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + uint32_t tmperror; + + /* I2C Bus error interrupt occurred ------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_BERR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + } + + /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_OVR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + } + + /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_ARLO) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + } + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the Error Callback in case of Error detected */ + if ((tmperror & (HAL_I2C_ERROR_BERR | HAL_I2C_ERROR_OVR | HAL_I2C_ERROR_ARLO)) != HAL_I2C_ERROR_NONE) + { + I2C_ITError(hi2c, tmperror); + } +} + +/** + * @brief Master Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Master Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterRxCpltCallback could be implemented in the user file + */ +} + +/** @brief Slave Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Address Match callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XFERDIRECTION + * @param AddrMatchCode Address Match Code + * @retval None + */ +__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + UNUSED(TransferDirection); + UNUSED(AddrMatchCode); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AddrCallback() could be implemented in the user file + */ +} + +/** + * @brief Listen Complete callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ListenCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Memory Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Memory Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief I2C error callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief I2C abort callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AbortCpltCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @brief Peripheral State, Mode and Error functions + * +@verbatim + =============================================================================== + ##### Peripheral State, Mode and Error functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the I2C handle state. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL state + */ +HAL_I2C_StateTypeDef HAL_I2C_GetState(const I2C_HandleTypeDef *hi2c) +{ + /* Return I2C handle state */ + return hi2c->State; +} + +/** + * @brief Returns the I2C Master, Slave, Memory or no mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL mode + */ +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(const I2C_HandleTypeDef *hi2c) +{ + return hi2c->Mode; +} + +/** + * @brief Return the I2C error code. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval I2C Error Code + */ +uint32_t HAL_I2C_GetError(const I2C_HandleTypeDef *hi2c) +{ + return hi2c->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup I2C_Private_Functions + * @{ + */ + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t tmpITFlags = ITFlags; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + /* Error callback will be send during stop flag treatment */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) == RESET) && \ + ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET))) + { + /* Write data to TXDR */ + if (hi2c->XferCount != 0U) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, + hi2c->XferOptions, I2C_NO_STARTSTOP); + } + else + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else + { + /* Nothing to do */ + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, tmpITFlags); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Memory Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Mem_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t direction = I2C_GENERATE_START_WRITE; + uint32_t tmpITFlags = ITFlags; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + /* Error callback will be send during stop flag treatment */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + if (hi2c->Memaddress == 0xFFFFFFFFU) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else + { + /* Write LSB part of Memory Address */ + hi2c->Instance->TXDR = hi2c->Memaddress; + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable Interrupt related to address step */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + direction = I2C_GENERATE_START_READ; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, direction); + } + else + { + hi2c->XferSize = hi2c->XferCount; + + /* Set NBYTES to write and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, direction); + } + } + else + { + /* Nothing to do */ + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, tmpITFlags); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t tmpITFlags = ITFlags; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, tmpITFlags); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hi2c->XferCount == 0U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + if (hi2c->XferCount > 0U) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + + if ((hi2c->XferCount == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_ADDR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, tmpITFlags); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write data to TXDR only if XferCount not reach "0" */ + /* A TXIS flag can be set, during STOP treatment */ + /* Check if all Data have already been sent */ + /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ + if (hi2c->XferCount > 0U) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + else + { + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t xfermode; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* No need to generate STOP, it is automatically done */ + /* But enable STOP interrupt, to treat it */ + /* Error callback will be send during stop flag treatment */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable TC interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI); + + if (hi2c->XferCount != 0U) + { + /* Recover Slave address */ + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + /* Prepare the new XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + xfermode = hi2c->XferOptions; + } + else + { + xfermode = I2C_AUTOEND_MODE; + } + } + + /* Set the new XferSize in Nbytes register */ + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Memory Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Mem_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t direction = I2C_GENERATE_START_WRITE; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* No need to generate STOP, it is automatically done */ + /* But enable STOP interrupt, to treat it */ + /* Error callback will be send during stop flag treatment */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write LSB part of Memory Address */ + hi2c->Instance->TXDR = hi2c->Memaddress; + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable Interrupt related to address step */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Enable only Error interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + if (hi2c->XferCount != 0U) + { + /* Prepare the new XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable Interrupt related to address step */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Enable only Error and NACK interrupt for data transfer */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + direction = I2C_GENERATE_START_READ; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, direction); + } + else + { + hi2c->XferSize = hi2c->XferCount; + + /* Set NBYTES to write and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, direction); + } + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t treatdmanack = 0U; + HAL_I2C_StateTypeDef tmpstate; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, ITFlags); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0 */ + /* So clear Flag NACKF only */ + if ((I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) || + (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET)) + { + /* Split check of hdmarx, for MISRA compliance */ + if (hi2c->hdmarx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET) + { + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) + { + treatdmanack = 1U; + } + } + } + + /* Split check of hdmatx, for MISRA compliance */ + if (hi2c->hdmatx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) + { + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx) == 0U) + { + treatdmanack = 1U; + } + } + } + + if (treatdmanack == 1U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, ITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Store current hi2c->State, solve MISRA2012-Rule-13.5 */ + tmpstate = hi2c->State; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else + { + /* Only Clear NACK Flag, no DMA treatment is pending */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_ADDR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for write request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for read request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TC flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief I2C Address complete process callback. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint8_t transferdirection; + uint16_t slaveaddrcode; + uint16_t ownadd1code; + uint16_t ownadd2code; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(ITFlags); + + /* In case of Listen state, need to inform upper layer of address match code event */ + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + transferdirection = I2C_GET_DIR(hi2c); + slaveaddrcode = I2C_GET_ADDR_MATCH(hi2c); + ownadd1code = I2C_GET_OWN_ADDRESS1(hi2c); + ownadd2code = I2C_GET_OWN_ADDRESS2(hi2c); + + /* If 10bits addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + if ((slaveaddrcode & SLAVE_ADDR_MSK) == ((ownadd1code >> SLAVE_ADDR_SHIFT) & SLAVE_ADDR_MSK)) + { + slaveaddrcode = ownadd1code; + hi2c->AddrEventCount++; + if (hi2c->AddrEventCount == 2U) + { + /* Reset Address Event counter */ + hi2c->AddrEventCount = 0U; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + slaveaddrcode = ownadd2code; + + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* else 7 bits addressing mode is selected */ + else + { + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* Else clear address flag only */ + else + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } +} + +/** + * @brief I2C Master sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c) +{ + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* No Generate Stop, to permit restart mode */ + /* The stop will be done at the end of transfer, when I2C_AUTOEND_MODE enable */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Slave sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + else + { + /* Do nothing */ + } + + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_RX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Master complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmperror; + uint32_t tmpITFlags = ITFlags; + __IO uint32_t tmpreg; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Reset handle parameters */ + hi2c->XferISR = NULL; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set acknowledge error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Fetch Last receive data if any */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) && (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET)) + { + /* Read data from RXDR */ + tmpreg = (uint8_t)hi2c->Instance->RXDR; + UNUSED(tmpreg); + } + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) || (tmperror != HAL_I2C_ERROR_NONE)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + /* hi2c->State == HAL_I2C_STATE_BUSY_TX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemTxCpltCallback(hi2c); +#else + HAL_I2C_MemTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemRxCpltCallback(hi2c); +#else + HAL_I2C_MemRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Slave complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + uint32_t tmpITFlags = ITFlags; + uint32_t tmpoptions = hi2c->XferOptions; + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else if (tmpstate == HAL_I2C_STATE_LISTEN) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT | I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_NONE; + } + else + { + /* Do nothing */ + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + if (hi2c->hdmatx != NULL) + { + hi2c->XferCount = (uint16_t)I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx); + } + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + hi2c->XferCount = (uint16_t)I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx); + } + } + else + { + /* Do nothing */ + } + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + } + } + + /* All data are not transferred, so set error code accordingly */ + if (hi2c->XferCount != 0U) + { + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hi2c->XferCount == 0U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + } + else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + /* Call the Sequential Complete callback, to inform upper layer of the end of Transfer */ + I2C_ITSlaveSeqCplt(hi2c); + + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* Call the corresponding callback to inform upper layer of End of Transfer */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Listen complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + /* Reset handle parameters */ + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(ITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + } + + /* Disable all Interrupts*/ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} + +/** + * @brief I2C interrupts error process. + * @param hi2c I2C handle. + * @param ErrorCode Error code to handle. + * @retval None + */ +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) +{ + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + + uint32_t tmppreviousstate; + + /* Reset handle parameters */ + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferCount = 0U; + + /* Set new error code */ + hi2c->ErrorCode |= ErrorCode; + + /* Disable Interrupts */ + if ((tmpstate == HAL_I2C_STATE_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + /* Disable all interrupts, except interrupts related to LISTEN state */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* keep HAL_I2C_STATE_LISTEN if set */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + } + else + { + /* Disable all interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* If state is an abort treatment on going, don't change state */ + /* This change will be do later */ + if (hi2c->State != HAL_I2C_STATE_ABORT) + { + /* Set HAL_I2C_STATE_READY */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Check if a STOPF is detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + } + hi2c->XferISR = NULL; + } + + /* Abort DMA TX transfer if any */ + tmppreviousstate = hi2c->PreviousState; + + if ((hi2c->hdmatx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_TX) || \ + (tmppreviousstate == I2C_STATE_SLAVE_BUSY_TX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmatx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + /* Abort DMA RX transfer if any */ + else if ((hi2c->hdmarx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_RX) || \ + (tmppreviousstate == I2C_STATE_SLAVE_BUSY_RX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmarx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } +} + +/** + * @brief I2C Error callback treatment. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_ABORT) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AbortCpltCallback(hi2c); +#else + HAL_I2C_AbortCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ErrorCallback(hi2c); +#else + HAL_I2C_ErrorCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Tx data register flush process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c) +{ + /* If a pending TXIS flag is set */ + /* Write a dummy data in TXDR to clear it */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET) + { + hi2c->Instance->TXDR = 0x00U; + } + + /* Flush TX register if not empty */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE); + } +} + +/** + * @brief DMA I2C master transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + + +/** + * @brief DMA I2C slave transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + uint32_t tmpoptions = hi2c->XferOptions; + + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + + +/** + * @brief DMA I2C master receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, + hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + + +/** + * @brief DMA I2C slave receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + uint32_t tmpoptions = hi2c->XferOptions; + + if ((I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + + +/** + * @brief DMA I2C communication error callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAError(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); +} + + +/** + * @brief DMA I2C communication abort callback + * (To be called at end of DMA Abort procedure). + * @param hdma DMA handle. + * @retval None + */ +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Reset AbortCpltCallback */ + if (hi2c->hdmatx != NULL) + { + hi2c->hdmatx->XferAbortCallback = NULL; + } + if (hi2c->hdmarx != NULL) + { + hi2c->hdmarx->XferAbortCallback = NULL; + } + + I2C_TreatErrorCallback(hi2c); +} + + +/** + * @brief This function handles I2C Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Flag Specifies the I2C flag to check. + * @param Status The actual Flag status (SET or RESET). + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, Flag) == Status)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of TXIS flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of STOP flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + HAL_StatusTypeDef status = HAL_OK; + + while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET) && (status == HAL_OK)) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + status = HAL_ERROR; + } + + /* Check if a STOPF is detected */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) && (status == HAL_OK)) + { + /* Check if an RXNE is pending */ + /* Store Last receive data if any */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) && (hi2c->XferSize > 0U)) + { + /* Return HAL_OK */ + /* The Reading of data from RXDR will be done in caller function */ + status = HAL_OK; + } + + /* Check a no-acknowledge have been detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + hi2c->ErrorCode = HAL_I2C_ERROR_AF; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + status = HAL_ERROR; + } + else + { + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + } + } + + /* Check for the Timeout */ + if ((((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) && (status == HAL_OK)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + status = HAL_ERROR; + } + } + } + return status; +} + +/** + * @brief This function handles errors detection during an I2C Communication. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_IsErrorOccurred(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t itflag = hi2c->Instance->ISR; + uint32_t error_code = 0; + uint32_t tickstart = Tickstart; + uint32_t tmp1; + HAL_I2C_ModeTypeDef tmp2; + + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_AF)) + { + /* Clear NACKF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until STOP Flag is set or timeout occurred */ + /* AutoEnd should be initiate after AF */ + while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) && (status == HAL_OK)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + tmp1 = (uint32_t)(hi2c->Instance->CR2 & I2C_CR2_STOP); + tmp2 = hi2c->Mode; + + /* In case of I2C still busy, try to regenerate a STOP manually */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET) && \ + (tmp1 != I2C_CR2_STOP) && \ + (tmp2 != HAL_I2C_MODE_SLAVE)) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + + /* Update Tick with new reference */ + tickstart = HAL_GetTick(); + } + + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > I2C_TIMEOUT_STOPF) + { + error_code |= HAL_I2C_ERROR_TIMEOUT; + + status = HAL_ERROR; + + break; + } + } + } + } + } + + /* In case STOP Flag is detected, clear it */ + if (status == HAL_OK) + { + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + error_code |= HAL_I2C_ERROR_AF; + + status = HAL_ERROR; + } + + /* Refresh Content of Status register */ + itflag = hi2c->Instance->ISR; + + /* Then verify if an additional errors occurs */ + /* Check if a Bus error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_BERR)) + { + error_code |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + + status = HAL_ERROR; + } + + /* Check if an Over-Run/Under-Run error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_OVR)) + { + error_code |= HAL_I2C_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + + status = HAL_ERROR; + } + + /* Check if an Arbitration Loss error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_ARLO)) + { + error_code |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + + status = HAL_ERROR; + } + + if (status != HAL_OK) + { + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->ErrorCode |= error_code; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } + + return status; +} + +/** + * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). + * @param hi2c I2C handle. + * @param DevAddress Specifies the slave address to be programmed. + * @param Size Specifies the number of bytes to be programmed. + * This parameter must be a value between 0 and 255. + * @param Mode New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_RELOAD_MODE Enable Reload mode . + * @arg @ref I2C_AUTOEND_MODE Enable Automatic end mode. + * @arg @ref I2C_SOFTEND_MODE Enable Software end mode. + * @param Request New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_NO_STARTSTOP Don't Generate stop and start condition. + * @arg @ref I2C_GENERATE_STOP Generate stop condition (Size should be set to 0). + * @arg @ref I2C_GENERATE_START_READ Generate Restart for read request. + * @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request. + * @retval None + */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, + uint32_t Request) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_TRANSFER_MODE(Mode)); + assert_param(IS_TRANSFER_REQUEST(Request)); + + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp = ((uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | \ + (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \ + (uint32_t)Mode | (uint32_t)Request) & (~0x80000000U)); + + /* update CR2 register */ + MODIFY_REG(hi2c->Instance->CR2, \ + ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | \ + (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | \ + I2C_CR2_START | I2C_CR2_STOP)), tmp); +} + +/** + * @brief Manage the enabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((hi2c->XferISR != I2C_Master_ISR_DMA) && \ + (hi2c->XferISR != I2C_Slave_ISR_DMA) && \ + (hi2c->XferISR != I2C_Mem_ISR_DMA)) + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Enable ERR, TC, STOP, NACK and TXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + } + + else + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Enable ERR, TC, STOP, NACK and TXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= (I2C_IT_STOPI | I2C_IT_TCI); + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + } + + /* Enable interrupts only at the end */ + /* to avoid the risk of I2C interrupt handle execution before */ + /* all interrupts requested done */ + __HAL_I2C_ENABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Manage the disabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Disable TC and TXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_TXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Disable TC and RXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_RXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Disable ADDR, NACK and STOP interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + + /* Disable interrupts only at the end */ + /* to avoid a breaking situation like at "t" time */ + /* all disable interrupts request are not done */ + __HAL_I2C_DISABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Convert I2Cx OTHER_xxx XferOptions to functional XferOptions. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c) +{ + /* if user set XferOptions to I2C_OTHER_FRAME */ + /* it request implicitly to generate a restart condition */ + /* set XferOptions to I2C_FIRST_FRAME */ + if (hi2c->XferOptions == I2C_OTHER_FRAME) + { + hi2c->XferOptions = I2C_FIRST_FRAME; + } + /* else if user set XferOptions to I2C_OTHER_AND_LAST_FRAME */ + /* it request implicitly to generate a restart condition */ + /* then generate a stop condition at the end of transfer */ + /* set XferOptions to I2C_FIRST_AND_LAST_FRAME */ + else if (hi2c->XferOptions == I2C_OTHER_AND_LAST_FRAME) + { + hi2c->XferOptions = I2C_FIRST_AND_LAST_FRAME; + } + else + { + /* Nothing to do */ + } +} + +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c_ex.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c_ex.c new file mode 100644 index 0000000..eda42d4 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c_ex.c @@ -0,0 +1,364 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_i2c_ex.c + * @author MCD Application Team + * @brief I2C Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of I2C Extended peripheral: + * + Filter Mode Functions + * + WakeUp Mode Functions + * + FastModePlus Functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### I2C peripheral Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the I2C interface for STM32G0xx + devices contains the following additional features + + (+) Possibility to disable or enable Analog Noise Filter + (+) Use of a configured Digital Noise Filter + (+) Disable or enable wakeup from Stop mode(s) + (+) Disable or enable Fast Mode Plus + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure Noise Filter and Wake Up Feature + (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter() + (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter() + (#) Configure the enable or disable of I2C Wake Up Mode using the functions : + (++) HAL_I2CEx_EnableWakeUp() + (++) HAL_I2CEx_DisableWakeUp() + (#) Configure the enable or disable of fast mode plus driving capability using the functions : + (++) HAL_I2CEx_EnableFastModePlus() + (++) HAL_I2CEx_DisableFastModePlus() + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup I2CEx I2CEx + * @brief I2C Extended HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @defgroup I2CEx_Exported_Functions_Group1 Filter Mode Functions + * @brief Filter Mode Functions + * +@verbatim + =============================================================================== + ##### Filter Mode Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Noise Filters + +@endverbatim + * @{ + */ + +/** + * @brief Configure I2C Analog noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param AnalogFilter New state of the Analog filter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Reset I2Cx ANOFF bit */ + hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF); + + /* Set analog filter bit*/ + hi2c->Instance->CR1 |= AnalogFilter; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configure I2C Digital noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Get the old register value */ + tmpreg = hi2c->Instance->CR1; + + /* Reset I2Cx DNF bits [11:8] */ + tmpreg &= ~(I2C_CR1_DNF); + + /* Set I2Cx DNF coefficient */ + tmpreg |= DigitalFilter << 8U; + + /* Store the new register value */ + hi2c->Instance->CR1 = tmpreg; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** @defgroup I2CEx_Exported_Functions_Group2 WakeUp Mode Functions + * @brief WakeUp Mode Functions + * +@verbatim + =============================================================================== + ##### WakeUp Mode Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Wake Up Feature + +@endverbatim + * @{ + */ + +/** + * @brief Enable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 |= I2C_CR1_WUPEN; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN); + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** @defgroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @brief Fast Mode Plus Functions + * +@verbatim + =============================================================================== + ##### Fast Mode Plus Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Fast Mode Plus + +@endverbatim + * @{ + */ + +/** + * @brief Enable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be enabled on all selected + * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter. + * @note For all I2C2 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C2 parameter. + * @note For all I2C3 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C3 parameter. + * @retval None + */ +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Enable fast mode plus driving capability for selected pin */ + SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); +} + +/** + * @brief Disable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be disabled on all selected + * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter. + * @note For all I2C2 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C2 parameter. + * @note For all I2C3 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C3 parameter. + * @retval None + */ +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Disable fast mode plus driving capability for selected pin */ + CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); +} +/** + * @} + */ +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd.c new file mode 100644 index 0000000..420e089 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd.c @@ -0,0 +1,2249 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pcd.c + * @author MCD Application Team + * @brief PCD HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The PCD HAL driver can be used as follows: + + (#) Declare a PCD_HandleTypeDef handle structure, for example: + PCD_HandleTypeDef hpcd; + + (#) Fill parameters of Init structure in HCD handle + + (#) Call HAL_PCD_Init() API to initialize the PCD peripheral (Core, Device core, ...) + + (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API: + (##) Enable the PCD/USB Low Level interface clock using + (+++) __HAL_RCC_USB_CLK_ENABLE(); For USB Device FS peripheral + + (##) Initialize the related GPIO clocks + (##) Configure PCD pin-out + (##) Configure PCD NVIC interrupt + + (#)Associate the Upper USB device stack to the HAL PCD Driver: + (##) hpcd.pData = pdev; + + (#)Enable PCD transmission and reception: + (##) HAL_PCD_Start(); + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup PCD PCD + * @brief PCD HAL module driver + * @{ + */ + +#ifdef HAL_PCD_MODULE_ENABLED + +#if defined (USB_DRD_FS) + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PCD_Private_Macros PCD Private Macros + * @{ + */ +#define PCD_MIN(a, b) (((a) < (b)) ? (a) : (b)) +#define PCD_MAX(a, b) (((a) > (b)) ? (a) : (b)) +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup PCD_Private_Functions PCD Private Functions + * @{ + */ + +static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd); +#if (USE_USB_DOUBLE_BUFFER == 1U) +static HAL_StatusTypeDef HAL_PCD_EP_DB_Transmit(PCD_HandleTypeDef *hpcd, PCD_EPTypeDef *ep, uint16_t wEPVal); +static uint16_t HAL_PCD_EP_DB_Receive(PCD_HandleTypeDef *hpcd, PCD_EPTypeDef *ep, uint16_t wEPVal); +#endif /* (USE_USB_DOUBLE_BUFFER == 1U) */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PCD_Exported_Functions PCD Exported Functions + * @{ + */ + +/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the PCD according to the specified + * parameters in the PCD_InitTypeDef and initialize the associated handle. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) +{ + uint8_t i; + + /* Check the PCD handle allocation */ + if (hpcd == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance)); + + if (hpcd->State == HAL_PCD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hpcd->Lock = HAL_UNLOCKED; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SOFCallback = HAL_PCD_SOFCallback; + hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; + hpcd->ResetCallback = HAL_PCD_ResetCallback; + hpcd->SuspendCallback = HAL_PCD_SuspendCallback; + hpcd->ResumeCallback = HAL_PCD_ResumeCallback; + hpcd->ConnectCallback = HAL_PCD_ConnectCallback; + hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; + hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; + hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; + hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; + hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; + hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; + hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; + + if (hpcd->MspInitCallback == NULL) + { + hpcd->MspInitCallback = HAL_PCD_MspInit; + } + + /* Init the low level hardware */ + hpcd->MspInitCallback(hpcd); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + HAL_PCD_MspInit(hpcd); +#endif /* (USE_HAL_PCD_REGISTER_CALLBACKS) */ + } + + hpcd->State = HAL_PCD_STATE_BUSY; + + /* Disable the Interrupts */ + __HAL_PCD_DISABLE(hpcd); + + /* Init endpoints structures */ + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + { + /* Init ep structure */ + hpcd->IN_ep[i].is_in = 1U; + hpcd->IN_ep[i].num = i; + /* Control until ep is activated */ + hpcd->IN_ep[i].type = EP_TYPE_CTRL; + hpcd->IN_ep[i].maxpacket = 0U; + hpcd->IN_ep[i].xfer_buff = 0U; + hpcd->IN_ep[i].xfer_len = 0U; + } + + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + { + hpcd->OUT_ep[i].is_in = 0U; + hpcd->OUT_ep[i].num = i; + /* Control until ep is activated */ + hpcd->OUT_ep[i].type = EP_TYPE_CTRL; + hpcd->OUT_ep[i].maxpacket = 0U; + hpcd->OUT_ep[i].xfer_buff = 0U; + hpcd->OUT_ep[i].xfer_len = 0U; + } + + /* Init Device */ + (void)USB_DevInit(hpcd->Instance, hpcd->Init); + + hpcd->USB_Address = 0U; + hpcd->State = HAL_PCD_STATE_READY; + + /* Activate LPM */ + if (hpcd->Init.lpm_enable == 1U) + { + (void)HAL_PCDEx_ActivateLPM(hpcd); + } + + return HAL_OK; +} + +/** + * @brief DeInitializes the PCD peripheral. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd) +{ + /* Check the PCD handle allocation */ + if (hpcd == NULL) + { + return HAL_ERROR; + } + + hpcd->State = HAL_PCD_STATE_BUSY; + + /* Stop Device */ + if (USB_StopDevice(hpcd->Instance) != HAL_OK) + { + return HAL_ERROR; + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + if (hpcd->MspDeInitCallback == NULL) + { + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hpcd->MspDeInitCallback(hpcd); +#else + /* DeInit the low level hardware: CLOCK, NVIC.*/ + HAL_PCD_MspDeInit(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + hpcd->State = HAL_PCD_STATE_RESET; + + return HAL_OK; +} + +/** + * @brief Initializes the PCD MSP. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes PCD MSP. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User USB PCD Callback + * To be used instead of the weak predefined callback + * @param hpcd USB PCD handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID + * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID + * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID + * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID + * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID + * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID + * @arg @ref HAL_PCD_DISCONNECT_CB_ID USB PCD Disconnect callback ID + * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID + * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, + HAL_PCD_CallbackIDTypeDef CallbackID, + pPCD_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + switch (CallbackID) + { + case HAL_PCD_SOF_CB_ID : + hpcd->SOFCallback = pCallback; + break; + + case HAL_PCD_SETUPSTAGE_CB_ID : + hpcd->SetupStageCallback = pCallback; + break; + + case HAL_PCD_RESET_CB_ID : + hpcd->ResetCallback = pCallback; + break; + + case HAL_PCD_SUSPEND_CB_ID : + hpcd->SuspendCallback = pCallback; + break; + + case HAL_PCD_RESUME_CB_ID : + hpcd->ResumeCallback = pCallback; + break; + + case HAL_PCD_CONNECT_CB_ID : + hpcd->ConnectCallback = pCallback; + break; + + case HAL_PCD_DISCONNECT_CB_ID : + hpcd->DisconnectCallback = pCallback; + break; + + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = pCallback; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hpcd->State == HAL_PCD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = pCallback; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + return status; +} + +/** + * @brief Unregister an USB PCD Callback + * USB PCD callback is redirected to the weak predefined callback + * @param hpcd USB PCD handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID + * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID + * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID + * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID + * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID + * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID + * @arg @ref HAL_PCD_DISCONNECT_CB_ID USB PCD Disconnect callback ID + * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID + * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + /* Setup Legacy weak Callbacks */ + if (hpcd->State == HAL_PCD_STATE_READY) + { + switch (CallbackID) + { + case HAL_PCD_SOF_CB_ID : + hpcd->SOFCallback = HAL_PCD_SOFCallback; + break; + + case HAL_PCD_SETUPSTAGE_CB_ID : + hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; + break; + + case HAL_PCD_RESET_CB_ID : + hpcd->ResetCallback = HAL_PCD_ResetCallback; + break; + + case HAL_PCD_SUSPEND_CB_ID : + hpcd->SuspendCallback = HAL_PCD_SuspendCallback; + break; + + case HAL_PCD_RESUME_CB_ID : + hpcd->ResumeCallback = HAL_PCD_ResumeCallback; + break; + + case HAL_PCD_CONNECT_CB_ID : + hpcd->ConnectCallback = HAL_PCD_ConnectCallback; + break; + + case HAL_PCD_DISCONNECT_CB_ID : + hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; + break; + + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = HAL_PCD_MspInit; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hpcd->State == HAL_PCD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = HAL_PCD_MspInit; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + return status; +} + +/** + * @brief Register USB PCD Data OUT Stage Callback + * To be used instead of the weak HAL_PCD_DataOutStageCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Data OUT Stage Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataOutStageCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataOutStageCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Data OUT Stage Callback + * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataOutStageCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; /* Legacy weak DataOutStageCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Data IN Stage Callback + * To be used instead of the weak HAL_PCD_DataInStageCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Data IN Stage Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataInStageCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataInStageCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Data IN Stage Callback + * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataInStageCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; /* Legacy weak DataInStageCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Iso OUT incomplete Callback + * To be used instead of the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Iso OUT incomplete Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoOutIncpltCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOOUTIncompleteCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Iso OUT incomplete Callback + * USB PCD Iso OUT incomplete Callback is redirected + * to the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; /* Legacy weak ISOOUTIncompleteCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Iso IN incomplete Callback + * To be used instead of the weak HAL_PCD_ISOINIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Iso IN incomplete Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoInIncpltCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOINIncompleteCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Iso IN incomplete Callback + * USB PCD Iso IN incomplete Callback is redirected + * to the weak HAL_PCD_ISOINIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; /* Legacy weak ISOINIncompleteCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD BCD Callback + * To be used instead of the weak HAL_PCDEx_BCD_Callback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD BCD Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->BCDCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD BCD Callback + * USB BCD Callback is redirected to the weak HAL_PCDEx_BCD_Callback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; /* Legacy weak HAL_PCDEx_BCD_Callback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD LPM Callback + * To be used instead of the weak HAL_PCDEx_LPM_Callback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD LPM Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->LPMCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD LPM Callback + * USB LPM Callback is redirected to the weak HAL_PCDEx_LPM_Callback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; /* Legacy weak HAL_PCDEx_LPM_Callback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the PCD data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Start the USB device + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + __HAL_PCD_ENABLE(hpcd); + (void)USB_DevConnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Stop the USB device. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + __HAL_PCD_DISABLE(hpcd); + (void)USB_DevDisconnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + + +/** + * @brief This function handles PCD interrupt request. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) +{ + uint32_t wIstr = USB_ReadInterrupts(hpcd->Instance); + + /* check if this is an USB pending IT */ + if ((SYSCFG->IT_LINE_SR[8] & (0x1U << 2)) == 0U) + { + return; + } + + if ((wIstr & USB_ISTR_CTR) == USB_ISTR_CTR) + { + /* servicing of the endpoint correct transfer interrupt */ + /* clear of the CTR flag into the sub */ + (void)PCD_EP_ISR_Handler(hpcd); + + return; + } + + if ((wIstr & USB_ISTR_RESET) == USB_ISTR_RESET) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_RESET); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResetCallback(hpcd); +#else + HAL_PCD_ResetCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + (void)HAL_PCD_SetAddress(hpcd, 0U); + + return; + } + + if ((wIstr & USB_ISTR_PMAOVR) == USB_ISTR_PMAOVR) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_PMAOVR); + + return; + } + + if ((wIstr & USB_ISTR_ERR) == USB_ISTR_ERR) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ERR); + + return; + } + + if ((wIstr & USB_ISTR_WKUP) == USB_ISTR_WKUP) + { + hpcd->Instance->CNTR &= ~(USB_CNTR_SUSPRDY); + hpcd->Instance->CNTR &= ~(USB_CNTR_SUSPEN); + + if (hpcd->LPM_State == LPM_L1) + { + hpcd->LPM_State = LPM_L0; +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->LPMCallback(hpcd, PCD_LPM_L0_ACTIVE); +#else + HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L0_ACTIVE); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResumeCallback(hpcd); +#else + HAL_PCD_ResumeCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_WKUP); + + return; + } + + if ((wIstr & USB_ISTR_SUSP) == USB_ISTR_SUSP) + { + /* Force low-power mode in the macrocell */ + hpcd->Instance->CNTR |= USB_CNTR_SUSPEN; + + /* clear of the ISTR bit must be done after setting of CNTR_FSUSP */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SUSP); + + hpcd->Instance->CNTR |= USB_CNTR_SUSPRDY; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SuspendCallback(hpcd); +#else + HAL_PCD_SuspendCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + return; + } + + /* Handle LPM Interrupt */ + if ((wIstr & USB_ISTR_L1REQ) == USB_ISTR_L1REQ) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_L1REQ); + if (hpcd->LPM_State == LPM_L0) + { + /* Force suspend and low-power mode before going to L1 state*/ + hpcd->Instance->CNTR |= USB_CNTR_SUSPRDY; + hpcd->Instance->CNTR |= USB_CNTR_SUSPEN; + + hpcd->LPM_State = LPM_L1; + hpcd->BESL = ((uint32_t)hpcd->Instance->LPMCSR & USB_LPMCSR_BESL) >> 2; +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->LPMCallback(hpcd, PCD_LPM_L1_ACTIVE); +#else + HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L1_ACTIVE); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SuspendCallback(hpcd); +#else + HAL_PCD_SuspendCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + return; + } + + if ((wIstr & USB_ISTR_SOF) == USB_ISTR_SOF) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SOF); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SOFCallback(hpcd); +#else + HAL_PCD_SOFCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + return; + } + + if ((wIstr & USB_ISTR_ESOF) == USB_ISTR_ESOF) + { + /* clear ESOF flag in ISTR */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ESOF); + + return; + } +} + + +/** + * @brief Data OUT stage callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DataOutStageCallback could be implemented in the user file + */ +} + +/** + * @brief Data IN stage callback + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DataInStageCallback could be implemented in the user file + */ +} +/** + * @brief Setup stage callback + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SetupStageCallback could be implemented in the user file + */ +} + +/** + * @brief USB Start Of Frame callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SOFCallback could be implemented in the user file + */ +} + +/** + * @brief USB Reset callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ResetCallback could be implemented in the user file + */ +} + +/** + * @brief Suspend event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SuspendCallback could be implemented in the user file + */ +} + +/** + * @brief Resume event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ResumeCallback could be implemented in the user file + */ +} + +/** + * @brief Incomplete ISO OUT callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Incomplete ISO IN callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Connection event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ConnectCallback could be implemented in the user file + */ +} + +/** + * @brief Disconnection event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DisconnectCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the PCD data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Connect the USB device + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + (void)USB_DevConnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Disconnect the USB device. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + (void)USB_DevDisconnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Set the USB Device address. + * @param hpcd PCD handle + * @param address new device address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address) +{ + __HAL_LOCK(hpcd); + hpcd->USB_Address = address; + (void)USB_SetDevAddress(hpcd->Instance, address); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} +/** + * @brief Open and configure an endpoint. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param ep_mps endpoint max packet size + * @param ep_type endpoint type + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint16_t ep_mps, uint8_t ep_type) +{ + HAL_StatusTypeDef ret = HAL_OK; + PCD_EPTypeDef *ep; + + if ((ep_addr & 0x80U) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + + ep->num = ep_addr & EP_ADDR_MSK; + ep->maxpacket = ep_mps; + ep->type = ep_type; + + /* Set initial data PID. */ + if (ep_type == EP_TYPE_BULK) + { + ep->data_pid_start = 0U; + } + + __HAL_LOCK(hpcd); + (void)USB_ActivateEndpoint(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + + return ret; +} + +/** + * @brief Deactivate an endpoint. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if ((ep_addr & 0x80U) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + (void)USB_DeactivateEndpoint(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + return HAL_OK; +} + + +/** + * @brief Receive an amount of data. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param pBuf pointer to the reception buffer + * @param len amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + PCD_EPTypeDef *ep; + + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + ep->xfer_len = len; + ep->xfer_count = 0U; + ep->is_in = 0U; + ep->num = ep_addr & EP_ADDR_MSK; + + (void)USB_EPStartXfer(hpcd->Instance, ep); + + return HAL_OK; +} + +/** + * @brief Get Received Data Size + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval Data Size + */ +uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef const *hpcd, uint8_t ep_addr) +{ + return hpcd->OUT_ep[ep_addr & EP_ADDR_MSK].xfer_count; +} +/** + * @brief Send an amount of data + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param pBuf pointer to the transmission buffer + * @param len amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + PCD_EPTypeDef *ep; + + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + ep->xfer_len = len; + ep->xfer_fill_db = 1U; + ep->xfer_len_db = len; + ep->xfer_count = 0U; + ep->is_in = 1U; + ep->num = ep_addr & EP_ADDR_MSK; + + (void)USB_EPStartXfer(hpcd->Instance, ep); + + return HAL_OK; +} + +/** + * @brief Set a STALL condition over an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if (((uint32_t)ep_addr & EP_ADDR_MSK) > hpcd->Init.dev_endpoints) + { + return HAL_ERROR; + } + + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr]; + ep->is_in = 0U; + } + + ep->is_stall = 1U; + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + + (void)USB_EPSetStall(hpcd->Instance, ep); + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Clear a STALL condition over in an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if (((uint32_t)ep_addr & 0x0FU) > hpcd->Init.dev_endpoints) + { + return HAL_ERROR; + } + + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + + ep->is_stall = 0U; + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + (void)USB_EPClearStall(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Abort an USB EP transaction. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Abort(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + HAL_StatusTypeDef ret; + PCD_EPTypeDef *ep; + + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + } + + /* Stop Xfer */ + ret = USB_EPStopXfer(hpcd->Instance, ep); + + return ret; +} + +/** + * @brief Flush an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + __HAL_LOCK(hpcd); + + if ((ep_addr & 0x80U) == 0x80U) + { + (void)USB_FlushTxFifo(hpcd->Instance, (uint32_t)ep_addr & EP_ADDR_MSK); + } + else + { + (void)USB_FlushRxFifo(hpcd->Instance); + } + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Activate remote wakeup signalling + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) +{ + return (USB_ActivateRemoteWakeup(hpcd->Instance)); +} + +/** + * @brief De-activate remote wakeup signalling. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) +{ + return (USB_DeActivateRemoteWakeup(hpcd->Instance)); +} + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the PCD handle state. + * @param hpcd PCD handle + * @retval HAL state + */ +PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef const *hpcd) +{ + return hpcd->State; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup PCD_Private_Functions + * @{ + */ + + +/** + * @brief This function handles PCD Endpoint interrupt request. + * @param hpcd PCD handle + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd) +{ + PCD_EPTypeDef *ep; + uint16_t count; + uint16_t wIstr; + uint16_t wEPVal; + uint16_t TxPctSize; + uint8_t epindex; + +#if (USE_USB_DOUBLE_BUFFER != 1U) + count = 0U; +#endif /* USE_USB_DOUBLE_BUFFER */ + + /* stay in loop while pending interrupts */ + while ((hpcd->Instance->ISTR & USB_ISTR_CTR) != 0U) + { + wIstr = (uint16_t)hpcd->Instance->ISTR; + + /* extract highest priority endpoint number */ + epindex = (uint8_t)(wIstr & USB_ISTR_IDN); + + if (epindex == 0U) + { + /* Decode and service control endpoint interrupt */ + + /* DIR bit = origin of the interrupt */ + if ((wIstr & USB_ISTR_DIR) == 0U) + { + /* DIR = 0 */ + + /* DIR = 0 => IN int */ + /* DIR = 0 implies that (EP_CTR_TX = 1) always */ + PCD_CLEAR_TX_EP_CTR(hpcd->Instance, PCD_ENDP0); + ep = &hpcd->IN_ep[0]; + + ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); + ep->xfer_buff += ep->xfer_count; + + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, 0U); +#else + HAL_PCD_DataInStageCallback(hpcd, 0U); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + if ((hpcd->USB_Address > 0U) && (ep->xfer_len == 0U)) + { + hpcd->Instance->DADDR = ((uint16_t)hpcd->USB_Address | USB_DADDR_EF); + hpcd->USB_Address = 0U; + } + } + else + { + /* DIR = 1 */ + + /* DIR = 1 & CTR_RX => SETUP or OUT int */ + /* DIR = 1 & (CTR_TX | CTR_RX) => 2 int pending */ + ep = &hpcd->OUT_ep[0]; + wEPVal = (uint16_t)PCD_GET_ENDPOINT(hpcd->Instance, PCD_ENDP0); + + if ((wEPVal & USB_EP_SETUP) != 0U) + { + /* Get SETUP Packet */ + ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + + USB_ReadPMA(hpcd->Instance, (uint8_t *)hpcd->Setup, + ep->pmaadress, (uint16_t)ep->xfer_count); + + /* SETUP bit kept frozen while CTR_RX = 1 */ + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); + + /* Process SETUP Packet*/ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SetupStageCallback(hpcd); +#else + HAL_PCD_SetupStageCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else if ((wEPVal & USB_EP_VTRX) != 0U) + { + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); + + /* Get Control Data OUT Packet */ + ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + + if ((ep->xfer_count != 0U) && (ep->xfer_buff != 0U)) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, + ep->pmaadress, (uint16_t)ep->xfer_count); + + ep->xfer_buff += ep->xfer_count; + + /* Process Control Data OUT Packet */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, 0U); +#else + HAL_PCD_DataOutStageCallback(hpcd, 0U); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + wEPVal = (uint16_t)PCD_GET_ENDPOINT(hpcd->Instance, PCD_ENDP0); + + if (((wEPVal & USB_EP_SETUP) == 0U) && ((wEPVal & USB_EP_RX_STRX) != USB_EP_RX_VALID)) + { + PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket); + PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID); + } + } + } + } + else + { + /* Decode and service non control endpoints interrupt */ + /* process related endpoint register */ + wEPVal = (uint16_t)PCD_GET_ENDPOINT(hpcd->Instance, epindex); + + if ((wEPVal & USB_EP_VTRX) != 0U) + { + /* clear int flag */ + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, epindex); + ep = &hpcd->OUT_ep[epindex]; + + /* OUT Single Buffering */ + if (ep->doublebuffer == 0U) + { + count = (uint16_t)PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, count); + } + } +#if (USE_USB_DOUBLE_BUFFER == 1U) + else + { + /* manage double buffer bulk out */ + if (ep->type == EP_TYPE_BULK) + { + count = HAL_PCD_EP_DB_Receive(hpcd, ep, wEPVal); + } + else /* manage double buffer iso out */ + { + /* free EP OUT Buffer */ + PCD_FREE_USER_BUFFER(hpcd->Instance, ep->num, 0U); + + if ((PCD_GET_ENDPOINT(hpcd->Instance, ep->num) & USB_EP_DTOG_RX) != 0U) + { + /* read from endpoint BUF0Addr buffer */ + count = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); + } + } + else + { + /* read from endpoint BUF1Addr buffer */ + count = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); + } + } + } + } +#endif /* (USE_USB_DOUBLE_BUFFER == 1U) */ + + /* multi-packet on the NON control OUT endpoint */ + ep->xfer_count += count; + ep->xfer_buff += count; + + if ((ep->xfer_len == 0U) || (count < ep->maxpacket)) + { + /* RX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataOutStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + (void)USB_EPStartXfer(hpcd->Instance, ep); + } + } + + if ((wEPVal & USB_EP_VTTX) != 0U) + { + ep = &hpcd->IN_ep[epindex]; + + /* clear int flag */ + PCD_CLEAR_TX_EP_CTR(hpcd->Instance, epindex); + + if (ep->type == EP_TYPE_ISOC) + { + ep->xfer_len = 0U; + +#if (USE_USB_DOUBLE_BUFFER == 1U) + if (ep->doublebuffer != 0U) + { + if ((wEPVal & USB_EP_DTOG_TX) != 0U) + { + PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, 0U); + } + else + { + PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, 0U); + } + } +#endif /* (USE_USB_DOUBLE_BUFFER == 1U) */ + + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataInStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + /* Manage Single Buffer Transaction */ + if ((wEPVal & USB_EP_KIND) == 0U) + { + /* multi-packet on the NON control IN endpoint */ + TxPctSize = (uint16_t)PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len > TxPctSize) + { + ep->xfer_len -= TxPctSize; + } + else + { + ep->xfer_len = 0U; + } + + /* Zero Length Packet? */ + if (ep->xfer_len == 0U) + { + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataInStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + /* Transfer is not yet Done */ + ep->xfer_buff += TxPctSize; + ep->xfer_count += TxPctSize; + (void)USB_EPStartXfer(hpcd->Instance, ep); + } + } +#if (USE_USB_DOUBLE_BUFFER == 1U) + /* Double Buffer bulk IN (bulk transfer Len > Ep_Mps) */ + else + { + (void)HAL_PCD_EP_DB_Transmit(hpcd, ep, wEPVal); + } +#endif /* (USE_USB_DOUBLE_BUFFER == 1U) */ + } + } + } + } + + return HAL_OK; +} + + +#if (USE_USB_DOUBLE_BUFFER == 1U) +/** + * @brief Manage double buffer bulk out transaction from ISR + * @param hpcd PCD handle + * @param ep current endpoint handle + * @param wEPVal Last snapshot of EPRx register value taken in ISR + * @retval HAL status + */ +static uint16_t HAL_PCD_EP_DB_Receive(PCD_HandleTypeDef *hpcd, + PCD_EPTypeDef *ep, uint16_t wEPVal) +{ + uint16_t count; + + /* Manage Buffer0 OUT */ + if ((wEPVal & USB_EP_DTOG_RX) != 0U) + { + /* Get count of received Data on buffer0 */ + count = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len >= count) + { + ep->xfer_len -= count; + } + else + { + ep->xfer_len = 0U; + } + + if (ep->xfer_len == 0U) + { + /* set NAK to OUT endpoint since double buffer is enabled */ + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_NAK); + } + + /* Check if Buffer1 is in blocked state which requires to toggle */ + if ((wEPVal & USB_EP_DTOG_TX) != 0U) + { + PCD_FREE_USER_BUFFER(hpcd->Instance, ep->num, 0U); + } + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); + } + } + /* Manage Buffer 1 DTOG_RX=0 */ + else + { + /* Get count of received data */ + count = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len >= count) + { + ep->xfer_len -= count; + } + else + { + ep->xfer_len = 0U; + } + + if (ep->xfer_len == 0U) + { + /* set NAK on the current endpoint */ + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_NAK); + } + + /*Need to FreeUser Buffer*/ + if ((wEPVal & USB_EP_DTOG_TX) == 0U) + { + PCD_FREE_USER_BUFFER(hpcd->Instance, ep->num, 0U); + } + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); + } + } + + return count; +} + + +/** + * @brief Manage double buffer bulk IN transaction from ISR + * @param hpcd PCD handle + * @param ep current endpoint handle + * @param wEPVal Last snapshot of EPRx register value taken in ISR + * @retval HAL status + */ +static HAL_StatusTypeDef HAL_PCD_EP_DB_Transmit(PCD_HandleTypeDef *hpcd, + PCD_EPTypeDef *ep, uint16_t wEPVal) +{ + uint32_t len; + uint16_t TxPctSize; + + /* Data Buffer0 ACK received */ + if ((wEPVal & USB_EP_DTOG_TX) != 0U) + { + /* multi-packet on the NON control IN endpoint */ + TxPctSize = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len > TxPctSize) + { + ep->xfer_len -= TxPctSize; + } + else + { + ep->xfer_len = 0U; + } + + /* Transfer is completed */ + if (ep->xfer_len == 0U) + { + PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, 0U); + PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, 0U); + + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataInStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + if ((wEPVal & USB_EP_DTOG_RX) != 0U) + { + PCD_FREE_USER_BUFFER(hpcd->Instance, ep->num, 1U); + } + } + else /* Transfer is not yet Done */ + { + /* need to Free USB Buff */ + if ((wEPVal & USB_EP_DTOG_RX) != 0U) + { + PCD_FREE_USER_BUFFER(hpcd->Instance, ep->num, 1U); + } + + /* Still there is data to Fill in the next Buffer */ + if (ep->xfer_fill_db == 1U) + { + ep->xfer_buff += TxPctSize; + ep->xfer_count += TxPctSize; + + /* Calculate the len of the new buffer to fill */ + if (ep->xfer_len_db >= ep->maxpacket) + { + len = ep->maxpacket; + ep->xfer_len_db -= len; + } + else if (ep->xfer_len_db == 0U) + { + len = TxPctSize; + ep->xfer_fill_db = 0U; + } + else + { + ep->xfer_fill_db = 0U; + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + } + + /* Write remaining Data to Buffer */ + /* Set the Double buffer counter for pma buffer1 */ + PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, len); + + /* Copy user buffer to USB PMA */ + USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, (uint16_t)len); + } + } + } + else /* Data Buffer1 ACK received */ + { + /* multi-packet on the NON control IN endpoint */ + TxPctSize = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len >= TxPctSize) + { + ep->xfer_len -= TxPctSize; + } + else + { + ep->xfer_len = 0U; + } + + /* Transfer is completed */ + if (ep->xfer_len == 0U) + { + PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, 0U); + PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, 0U); + + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataInStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + /* need to Free USB Buff */ + if ((wEPVal & USB_EP_DTOG_RX) == 0U) + { + PCD_FREE_USER_BUFFER(hpcd->Instance, ep->num, 1U); + } + } + else /* Transfer is not yet Done */ + { + /* need to Free USB Buff */ + if ((wEPVal & USB_EP_DTOG_RX) == 0U) + { + PCD_FREE_USER_BUFFER(hpcd->Instance, ep->num, 1U); + } + + /* Still there is data to Fill in the next Buffer */ + if (ep->xfer_fill_db == 1U) + { + ep->xfer_buff += TxPctSize; + ep->xfer_count += TxPctSize; + + /* Calculate the len of the new buffer to fill */ + if (ep->xfer_len_db >= ep->maxpacket) + { + len = ep->maxpacket; + ep->xfer_len_db -= len; + } + else if (ep->xfer_len_db == 0U) + { + len = TxPctSize; + ep->xfer_fill_db = 0U; + } + else + { + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + ep->xfer_fill_db = 0; + } + + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, len); + + /* Copy the user buffer to USB PMA */ + USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, (uint16_t)len); + } + } + } + + /*enable endpoint IN*/ + PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_VALID); + + return HAL_OK; +} +#endif /* (USE_USB_DOUBLE_BUFFER == 1U) */ + + + +/** + * @} + */ +#endif /* defined (USB_DRD_FS) */ +#endif /* HAL_PCD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd_ex.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd_ex.c new file mode 100644 index 0000000..2819a34 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd_ex.c @@ -0,0 +1,333 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pcd_ex.c + * @author MCD Application Team + * @brief PCD Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Extended features functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup PCDEx PCDEx + * @brief PCD Extended HAL module driver + * @{ + */ + +#ifdef HAL_PCD_MODULE_ENABLED + +#if defined (USB_DRD_FS) +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions + * @{ + */ + +/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions + * @brief PCDEx control functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Update FIFO configuration + +@endverbatim + * @{ + */ + +/** + * @brief Configure PMA for EP + * @param hpcd Device instance + * @param ep_addr endpoint address + * @param ep_kind endpoint Kind + * USB_SNG_BUF: Single Buffer used + * USB_DBL_BUF: Double Buffer used + * @param pmaadress: EP address in The PMA: In case of single buffer endpoint + * this parameter is 16-bit value providing the address + * in PMA allocated to endpoint. + * In case of double buffer endpoint this parameter + * is a 32-bit value providing the endpoint buffer 0 address + * in the LSB part of 32-bit value and endpoint buffer 1 address + * in the MSB part of 32-bit value. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, uint16_t ep_addr, + uint16_t ep_kind, uint32_t pmaadress) +{ + PCD_EPTypeDef *ep; + + /* initialize ep structure*/ + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + } + else + { + ep = &hpcd->OUT_ep[ep_addr]; + } + + /* Here we check if the endpoint is single or double Buffer*/ + if (ep_kind == PCD_SNG_BUF) + { + /* Single Buffer */ + ep->doublebuffer = 0U; + /* Configure the PMA */ + ep->pmaadress = (uint16_t)pmaadress; + } +#if (USE_USB_DOUBLE_BUFFER == 1U) + else /* USB_DBL_BUF */ + { + /* Double Buffer Endpoint */ + ep->doublebuffer = 1U; + /* Configure the PMA */ + ep->pmaaddr0 = (uint16_t)(pmaadress & 0xFFFFU); + ep->pmaaddr1 = (uint16_t)((pmaadress & 0xFFFF0000U) >> 16); + } +#endif /* (USE_USB_DOUBLE_BUFFER == 1U) */ + + return HAL_OK; +} + +/** + * @brief Activate BatteryCharging feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd) +{ + USB_DRD_TypeDef *USBx = hpcd->Instance; + hpcd->battery_charging_active = 1U; + + /* Enable BCD feature */ + USBx->BCDR |= USB_BCDR_BCDEN; + + /* Enable DCD : Data Contact Detect */ + USBx->BCDR &= ~(USB_BCDR_PDEN); + USBx->BCDR &= ~(USB_BCDR_SDEN); + USBx->BCDR |= USB_BCDR_DCDEN; + + return HAL_OK; +} + +/** + * @brief Deactivate BatteryCharging feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd) +{ + USB_DRD_TypeDef *USBx = hpcd->Instance; + hpcd->battery_charging_active = 0U; + + /* Disable BCD feature */ + USBx->BCDR &= ~(USB_BCDR_BCDEN); + + return HAL_OK; +} + +/** + * @brief Handle BatteryCharging Process. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd) +{ + USB_DRD_TypeDef *USBx = hpcd->Instance; + uint32_t tickstart = HAL_GetTick(); + + /* Wait for Min DCD Timeout */ + HAL_Delay(300U); + + /* Data Pin Contact ? Check Detect flag */ + if ((USBx->BCDR & USB_BCDR_DCDET) == USB_BCDR_DCDET) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_CONTACT_DETECTION); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CONTACT_DETECTION); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + /* Primary detection: checks if connected to Standard Downstream Port + (without charging capability) */ + USBx->BCDR &= ~(USB_BCDR_DCDEN); + HAL_Delay(50U); + USBx->BCDR |= (USB_BCDR_PDEN); + HAL_Delay(50U); + + /* If Charger detect ? */ + if ((USBx->BCDR & USB_BCDR_PDET) == USB_BCDR_PDET) + { + /* Start secondary detection to check connection to Charging Downstream + Port or Dedicated Charging Port */ + USBx->BCDR &= ~(USB_BCDR_PDEN); + HAL_Delay(50U); + USBx->BCDR |= (USB_BCDR_SDEN); + HAL_Delay(50U); + + /* If CDP ? */ + if ((USBx->BCDR & USB_BCDR_SDET) == USB_BCDR_SDET) + { + /* Dedicated Downstream Port DCP */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + /* Charging Downstream Port CDP */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + else /* NO */ + { + /* Standard Downstream Port */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + /* Battery Charging capability discovery finished Start Enumeration */ + (void)HAL_PCDEx_DeActivateBCD(hpcd); + + /* Check for the Timeout, else start USB Device */ + if ((HAL_GetTick() - tickstart) > 1000U) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_ERROR); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_ERROR); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } +} + + +/** + * @brief Activate LPM feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd) +{ + + USB_DRD_TypeDef *USBx = hpcd->Instance; + hpcd->lpm_active = 1U; + hpcd->LPM_State = LPM_L0; + + USBx->LPMCSR |= USB_LPMCSR_LMPEN; + USBx->LPMCSR |= USB_LPMCSR_LPMACK; + + return HAL_OK; +} + +/** + * @brief Deactivate LPM feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd) +{ + USB_DRD_TypeDef *USBx = hpcd->Instance; + + hpcd->lpm_active = 0U; + + USBx->LPMCSR &= ~(USB_LPMCSR_LMPEN); + USBx->LPMCSR &= ~(USB_LPMCSR_LPMACK); + + return HAL_OK; +} + + + +/** + * @brief Send LPM message to user layer callback. + * @param hpcd PCD handle + * @param msg LPM message + * @retval HAL status + */ +__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(msg); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCDEx_LPM_Callback could be implemented in the user file + */ +} + +/** + * @brief Send BatteryCharging message to user layer callback. + * @param hpcd PCD handle + * @param msg LPM message + * @retval HAL status + */ +__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(msg); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCDEx_BCD_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_DRD_FS) */ +#endif /* HAL_PCD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c new file mode 100644 index 0000000..98cff75 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c @@ -0,0 +1,542 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pwr.c + * @author MCD Application Team + * @brief PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Initialization/de-initialization functions + * + Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWR + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup PWR_Private_Defines PWR Private Defines + * @{ + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + +@endverbatim + * @{ + */ + +/** + * @brief Deinitialize the HAL PWR peripheral registers to their default reset + values. + * @retval None + */ +void HAL_PWR_DeInit(void) +{ + __HAL_RCC_PWR_FORCE_RESET(); + __HAL_RCC_PWR_RELEASE_RESET(); +} + +/** + * @} + */ + +/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @brief Low Power modes configuration functions + * +@verbatim + + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + + [..] + *** WakeUp pin configuration *** + ================================ + [..] + (+) WakeUp pins are used to wakeup the system from Standby mode or + Shutdown mode. WakeUp pins polarity can be set to configure event + detection on high level (rising edge) or low level (falling edge). + + *** Low Power mode configuration *** + ===================================== + [..] + The devices feature 7 low-power modes: + (+) Low-power run mode: core and peripherals are running at low frequency. + Regulator is in low power mode. + (+) Sleep mode: Cortex-M0+ core stopped, peripherals kept running, + regulator is main mode. + (+) Low-power Sleep mode: Cortex-M0+ core stopped, peripherals kept running + and regulator in low power mode. + (+) Stop 0 mode: all clocks are stopped except LSI and LSE, regulator is + main mode. + (+) Stop 1 mode: all clocks are stopped except LSI and LSE, main regulator + off, low power regulator on. + (+) Standby mode: all clocks are stopped except LSI and LSE, regulator is + disable. + (+) Shutdown mode: all clocks are stopped except LSE, regulator is + disable. + + *** Low-power run mode *** + ========================== + [..] + (+) Entry: (from main run mode) + (++) set LPR bit with HAL_PWREx_EnableLowPowerRunMode() API after + having decreased the system clock below 2 MHz. + (+) Exit: + (++) clear LPR bit then wait for REGLPF bit to be reset with + HAL_PWREx_DisableLowPowerRunMode() API. Only then can the + system clock frequency be increased above 2 MHz. + + *** Sleep mode / Low-power sleep mode *** + ========================================= + [..] + (+) Entry: + The Sleep & Low-power Sleep modes are entered through + HAL_PWR_EnterSLEEPMode() API specifying whether or not the regulator + is forced to low-power mode and if exit is interrupt or event + triggered. + (++) PWR_MAINREGULATOR_ON: Sleep mode (regulator in main mode). + (++) PWR_LOWPOWERREGULATOR_ON: Low-power Sleep mode (regulator in low + power mode). In this case, the system clock frequency must have + been decreased below 2 MHz beforehand. + (++) PWR_SLEEPENTRY_WFI: Core enters sleep mode with WFI instruction + (++) PWR_SLEEPENTRY_WFE: Core enters sleep mode with WFE instruction + (+) WFI Exit: + (++) Any interrupt enabled in nested vectored interrupt controller (NVIC) + (+) WFE Exit: + (++) Any wakeup event if cortex is configured with SEVONPEND = 0 + (++) Interrupt even when disabled in NVIC if cortex is configured with + SEVONPEND = 1 + [..] When exiting the Low-power Sleep mode by issuing an interrupt or a wakeup event, + the MCU is in Low-power Run mode. + + *** Stop 0 & Stop 1 modes *** + ============================= + [..] + (+) Entry: + The Stop modes are entered through the following APIs: + (++) HAL_PWR_EnterSTOPMode() with following settings: + (+++) PWR_MAINREGULATOR_ON to enter STOP0 mode. + (+++) PWR_LOWPOWERREGULATOR_ON to enter STOP1 mode. + (+) Exit (interrupt or event-triggered, specified when entering STOP mode): + (++) PWR_STOPENTRY_WFI: enter Stop mode with WFI instruction + (++) PWR_STOPENTRY_WFE: enter Stop mode with WFE instruction + (+) WFI Exit: + (++) Any EXTI line (internal or external) configured in interrupt mode + with corresponding interrupt enable in NVIC + (+) WFE Exit: + (++) Any EXTI line (internal or external) configured in event mode if + cortex is configured with SEVONPEND = 0 + (++) Any EXTI line configured in interrupt mode (even if the + corresponding EXTI Interrupt vector is disabled in the NVIC) if + cortex is configured with SEVONPEND = 0. The interrupt source can + be external interrupts or peripherals with wakeup capability. + [..] When exiting Stop, the MCU is either in Run mode or in Low-power Run mode + depending on the LPR bit setting. + + *** Standby mode *** + ==================== + [..] In Standby mode, it is possible to keep backup SRAM content (defined as + full SRAM) keeping low power regulator on. This is achievable by setting + Ram retention bit calling HAL_PWREx_EnableSRAMRetention API. This increases + power consumption. + Its also possible to define I/O states using APIs: + HAL_PWREx_EnableGPIOPullUp, HAL_PWREx_EnableGPIOPullDown & + HAL_PWREx_EnablePullUpPullDownConfig + (+) Entry: + (++) The Standby mode is entered through HAL_PWR_EnterSTANDBYMode() API, by + setting SLEEPDEEP in Cortex control register. + (+) Exit: + (++) WKUP pin edge detection, RTC event (wakeup, alarm, timestamp), + tamper event (internal & external), LSE CSS detection, reset on + NRST pin, IWDG reset & BOR reset. + [..] Exiting Standby generates a power reset: Cortex is reset and execute + Reset handler vector, all registers in the Vcore domain are set to + their reset value. Registers outside the VCORE domain (RTC, WKUP, IWDG, + and Standby/Shutdown modes control) are not impacted. + + *** Shutdown mode *** + ====================== + [..] + In Shutdown mode, + voltage regulator is disabled, all clocks are off except LSE, RRS bit is + cleared. SRAM and registers contents are lost except for backup domain + registers. + (+) Entry: + (++) The Shutdown mode is entered through HAL_PWREx_EnterSHUTDOWNMode() API, + by setting SLEEPDEEP in Cortex control register. + (+) Exit: + (++) WKUP pin edge detection, RTC event (wakeup, alarm, timestamp), + tamper event (internal & external), LSE CSS detection, reset on + NRST pin. + [..] Exiting Shutdown generates a brown out reset: Cortex is reset and execute + Reset handler vector, all registers are set to their reset value but ones + in backup domain. + +@endverbatim + * @{ + */ + +/** + * @brief Enable access to the backup domain + * (RTC & TAMP registers, backup registers, RCC BDCR register). + * @note After reset, the backup domain is protected against + * possible unwanted write accesses. All RTC & TAMP registers (backup + * registers included) and RCC BDCR register are concerned. + * @retval None + */ +void HAL_PWR_EnableBkUpAccess(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_DBP); +} + + +/** + * @brief Disable access to the backup domain + * @retval None + */ +void HAL_PWR_DisableBkUpAccess(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_DBP); +} + +/** + * @brief Enable the WakeUp PINx functionality. + * @param WakeUpPinPolarity Specifies which Wake-Up pin to enable. + * This parameter can be one of the following legacy values which set + * the default polarity i.e. detection on high level (rising edge): + * @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3(*), + * PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5(*),PWR_WAKEUP_PIN6 + * or one of the following value where the user can explicitly specify + * the enabled pin and the chosen polarity: + * @arg @ref PWR_WAKEUP_PIN1_HIGH or PWR_WAKEUP_PIN1_LOW + * @arg @ref PWR_WAKEUP_PIN2_HIGH or PWR_WAKEUP_PIN2_LOW + * @arg @ref PWR_WAKEUP_PIN3_HIGH or PWR_WAKEUP_PIN3_LOW (*) + * @arg @ref PWR_WAKEUP_PIN4_HIGH or PWR_WAKEUP_PIN4_LOW + * @arg @ref PWR_WAKEUP_PIN5_HIGH or PWR_WAKEUP_PIN5_LOW (*) + * @arg @ref PWR_WAKEUP_PIN6_HIGH or PWR_WAKEUP_PIN6_LOW + * @note PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent. + * @note (*) availability depends on devices + * @retval None + */ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity) +{ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinPolarity)); + + /* Specifies the Wake-Up pin polarity for the event detection + (rising or falling edge) */ + MODIFY_REG(PWR->CR4, (PWR_CR4_WP & WakeUpPinPolarity), (WakeUpPinPolarity >> PWR_WUP_POLARITY_SHIFT)); + + /* Enable wake-up pin */ + SET_BIT(PWR->CR3, (PWR_CR3_EWUP & WakeUpPinPolarity)); +} + + +/** + * @brief Disable the WakeUp PINx functionality. + * @param WakeUpPinx Specifies the Power Wake-Up pin to disable. + * This parameter can be one of the following values: + * @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2,PWR_WAKEUP_PIN3(*), + * PWR_WAKEUP_PIN4,PWR_WAKEUP_PIN5(*),PWR_WAKEUP_PIN6 + * @note (*) availability depends on devices + * @retval None + */ +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx) +{ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); + + CLEAR_BIT(PWR->CR3, (PWR_CR3_EWUP & WakeUpPinx)); +} + + +/** + * @brief Enter Sleep or Low-power Sleep mode. + * @note In Sleep/Low-power Sleep mode, all I/O pins keep the same state as + * in Run mode. + * @param Regulator Specifies the regulator state in Sleep/Low-power Sleep + * mode. This parameter can be one of the following values: + * @arg @ref PWR_MAINREGULATOR_ON Sleep mode (regulator in main mode) + * @arg @ref PWR_LOWPOWERREGULATOR_ON Low-power Sleep mode (regulator + * in low-power mode) + * @note Low-power Sleep mode is entered from Low-power Run mode only. In + * case Regulator parameter is set to Low Power but MCU is in Run mode, + * we will first enter in Low-power Run mode. Therefore, user should + * take care that HCLK frequency is less than 2 MHz. + * @note When exiting Low-power Sleep mode, the MCU is in Low-power Run mode. + * To switch back to Run mode, user must call + * HAL_PWREx_DisableLowPowerRunMode() API. + * @param SLEEPEntry Specifies if Sleep mode is entered with WFI or WFE + * instruction. This parameter can be one of the following values: + * @arg @ref PWR_SLEEPENTRY_WFI enter Sleep or Low-power Sleep + * mode with WFI instruction + * @arg @ref PWR_SLEEPENTRY_WFE enter Sleep or Low-power Sleep + * mode with WFE instruction + * @note When WFI entry is used, tick interrupt have to be disabled if not + * desired as the interrupt wake up source. + * @retval None + */ +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(Regulator)); + assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry)); + + /* Set Regulator parameter */ + if (Regulator != PWR_MAINREGULATOR_ON) + { + /* If in run mode, first move to low-power run mode. + The system clock frequency must be below 2 MHz at this point. */ + if ((PWR->SR2 & PWR_SR2_REGLPF) == 0x00u) + { + HAL_PWREx_EnableLowPowerRunMode(); + } + } + else + { + /* If in low-power run mode at this point, exit it */ + if ((PWR->SR2 & PWR_SR2_REGLPF) != 0x00u) + { + if (HAL_PWREx_DisableLowPowerRunMode() != HAL_OK) + { + return ; + } + } + } + + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select SLEEP mode entry -------------------------------------------------*/ + if (SLEEPEntry == PWR_SLEEPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } +} + + +/** + * @brief Enter Stop mode + * @note This API is named HAL_PWR_EnterSTOPMode to ensure compatibility with + * legacy code running on devices where only "Stop mode" is mentioned + * with main or low power regulator ON. + * @note In Stop mode, all I/O pins keep the same state as in Run mode. + * @note All clocks in the VCORE domain are stopped; the PLL, the HSI and the + * HSE oscillators are disabled. Some peripherals with the wakeup + * capability can switch on the HSI to receive a frame, and switch off + * the HSI after receiving the frame if it is not a wakeup frame. + * SRAM and register contents are preserved. + * The BOR is available. + * The voltage regulator can be configured either in normal (Stop 0) or + * low-power mode (Stop 1). + * @note When exiting Stop 0 or Stop 1 mode by issuing an interrupt or a + * wakeup event, the HSI RC oscillator is selected as system clock + * @note When the voltage regulator operates in low power mode (Stop 1), + * an additional startup delay is incurred when waking up. By keeping + * the internal regulator ON during Stop mode (Stop 0), the consumption + * is higher although the startup time is reduced. + * @param Regulator Specifies the regulator state in Stop mode + * This parameter can be one of the following values: + * @arg @ref PWR_MAINREGULATOR_ON Stop 0 mode (main regulator ON) + * @arg @ref PWR_LOWPOWERREGULATOR_ON Stop 1 mode (low power + * regulator ON) + * @param STOPEntry Specifies Stop 0 or Stop 1 mode is entered with WFI or + * WFE instruction. This parameter can be one of the following values: + * @arg @ref PWR_STOPENTRY_WFI Enter Stop 0 or Stop 1 mode with WFI + * instruction. + * @arg @ref PWR_STOPENTRY_WFE Enter Stop 0 or Stop 1 mode with WFE + * instruction. + * @retval None + */ +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(Regulator)); + assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); + + if (Regulator != PWR_MAINREGULATOR_ON) + { + /* Stop mode with Low-Power Regulator */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_LOWPOWERMODE_STOP1); + } + else + { + /* Stop mode with Main Regulator */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_LOWPOWERMODE_STOP0); + } + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select Stop mode entry --------------------------------------------------*/ + if (STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } + + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + + +/** + * @brief Enter Standby mode. + * @note In Standby mode, the PLL, the HSI and the HSE oscillators are + * switched off. The voltage regulator is disabled. SRAM and register + * contents are lost except for registers in the Backup domain and + * Standby circuitry. BOR is available. + * @note The I/Os can be configured either with a pull-up or pull-down or can + * be kept in analog state. + * HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown() + * respectively enable Pull Up and PullDown state. + * HAL_PWREx_DisableGPIOPullUp() & HAL_PWREx_DisableGPIOPullDown() + * disable the same. These states are effective in Standby mode only if + * APC bit is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @note Sram content can be kept setting RRS through HAL_PWREx_EnableSRAMRetention() + * @retval None + */ +void HAL_PWR_EnterSTANDBYMode(void) +{ + /* Set Stand-by mode */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_LOWPOWERMODE_STANDBY); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* This option is used to ensure that store operations are completed */ +#if defined ( __CC_ARM) + __force_stores(); +#endif /* __CC_ARM */ + + /* Request Wait For Interrupt */ + __WFI(); +} + + +/** + * @brief Enable Sleep-On-Exit Cortex feature + * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the + * processor enters SLEEP or DEEPSLEEP mode when an interruption + * handling is over returning to thread mode. Setting this bit is + * useful when the processor is expected to run only on interruptions + * handling. + * @retval None + */ +void HAL_PWR_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + +/** + * @brief Disable Sleep-On-Exit Cortex feature + * @note Clear SLEEPONEXIT bit of SCR register. When this bit is set, the + * processor enters SLEEP or DEEPSLEEP mode when an interruption + * handling is over. + * @retval None + */ +void HAL_PWR_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + +/** + * @brief Enable Cortex Sev On Pending feature. + * @note Set SEVONPEND bit of SCR register. When this bit is set, enabled + * events and all interrupts, including disabled ones can wakeup + * processor from WFE. + * @retval None + */ +void HAL_PWR_EnableSEVOnPend(void) +{ + /* Set SEVONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + + +/** + * @brief Disable Cortex Sev On Pending feature. + * @note Clear SEVONPEND bit of SCR register. When this bit is clear, only + * enable interrupts or events can wakeup processor from WFE + * @retval None + */ +void HAL_PWR_DisableSEVOnPend(void) +{ + /* Clear SEVONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c new file mode 100644 index 0000000..96ac916 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c @@ -0,0 +1,1016 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_pwr_ex.c + * @author MCD Application Team + * @brief Extended PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Extended Initialization and de-initialization functions + * + Extended Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWREx + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup PWR_Extended_Private_Defines PWR Extended Private Defines + * @{ + */ + +#if defined(PWR_PVD_SUPPORT) +/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask + * @{ + */ +#define PVD_MODE_IT 0x00010000U /*!< Mask for interruption yielded + by PVD threshold crossing */ +#define PVD_MODE_EVT 0x00020000U /*!< Mask for event yielded + by PVD threshold crossing */ +#define PVD_RISING_EDGE 0x00000001U /*!< Mask for rising edge set as + PVD trigger */ +#define PVD_FALLING_EDGE 0x00000002U /*!< Mask for falling edge set as + PVD trigger */ +/** + * @} + */ +#endif /* PWR_PVD_SUPPORT */ + +/** @defgroup PWREx_TimeOut_Value PWREx Flag Setting Time Out Value + * @{ + */ +#define PWR_REGLPF_SETTING_DELAY_6_US 6u /*!< REGLPF should rise in about 5 us plus + 2 APB clock. Taking in account max Sysclk at + 2 MHz, and rounded to upper value */ + +#define PWR_VOSF_SETTING_DELAY_6_US 6u /*!< VOSF should rise in about 5 us plus + 2 APB clock. Taking in account max Sysclk at + 16 MHz, and rounded to upper value */ +/** + * @} + */ + +/** @defgroup PWREx_Gpio_Pin_Number PWREx Gpio Pin Number + * @{ + */ +#define PWR_GPIO_PIN_NB 16u /*!< Number of gpio pin in bank */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PWREx_Exported_Functions PWR Extended Exported Functions + * @{ + */ + +/** @addtogroup PWREx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Initialization and de-initialization functions ##### + =============================================================================== + [..] + *** PVD configuration *** + ========================= + [..] + (+) The PVD is used to monitor the VDD power supply by comparing it to a + threshold selected by the PVD Level (PVDRT[2:0] & PVDFT[2:0] bits in + PWR CR2 register). + (+) PVDO flag is available to indicate if VDD/VDDA is higher or lower + than the PVD threshold. This event is internally connected to the EXTI + line 16 and can generate an interrupt if enabled. + (+) The PVD is stopped in Standby & Shutdown mode. + + *** PVM configuration *** + ========================= + [..] + +@endverbatim + * @{ + */ + +/** + * @brief Enable battery charging. + * @note When VDD is present, charge the external battery on VBAT through an + * internal resistor. + * @param ResistorSelection specifies the resistor impedance. + * This parameter can be one of the following values: + * @arg @ref PWR_BATTERY_CHARGING_RESISTOR_5 5 kOhms resistor + * @arg @ref PWR_BATTERY_CHARGING_RESISTOR_1_5 1.5 kOhms resistor + * @retval None + */ +void HAL_PWREx_EnableBatteryCharging(uint32_t ResistorSelection) +{ + uint32_t tmpreg; + assert_param(IS_PWR_BATTERY_RESISTOR_SELECT(ResistorSelection)); + + /* Specify resistor selection and enable battery charging */ + tmpreg = (PWR->CR4 & ~PWR_CR4_VBRS); + PWR->CR4 = (tmpreg | ResistorSelection | PWR_CR4_VBE); +} + + +/** + * @brief Disable battery charging. + * @retval None + */ +void HAL_PWREx_DisableBatteryCharging(void) +{ + CLEAR_BIT(PWR->CR4, PWR_CR4_VBE); +} + +#if defined(PWR_CR3_ENB_ULP) +/** + * @brief Enable POR Monitor sampling mode. + * @note When entering ultra low power modes (standby, shutdown) this feature + * can be enabled to reduce further consumption: Power On Reset monitor + * is then set in sampling mode, and no more in always on mode. + * @retval None + */ +void HAL_PWREx_EnablePORMonitorSampling(void) +{ + PWR->CR3 |= PWR_CR3_ENB_ULP; +} + + +/** + * @brief Disable POR Monitor sampling mode. + * @retval None + */ +void HAL_PWREx_DisablePORMonitorSampling(void) +{ + PWR->CR3 &= ~PWR_CR3_ENB_ULP; +} +#endif /* PWR_CR3_ENB_ULP */ + +#if defined(PWR_PVD_SUPPORT) +/** + * @brief Configure the Power Voltage Detector (PVD). + * @param sConfigPVD pointer to a PWR_PVDTypeDef structure that contains the + PVD configuration information: threshold levels, operating mode. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage thresholds corresponding to each + * detection level. + * @note User should take care that rising threshold is higher than falling + * one in order to avoid having always PVDO output set. + * @retval HAL_OK + */ +HAL_StatusTypeDef HAL_PWREx_ConfigPVD(PWR_PVDTypeDef *sConfigPVD) +{ + /* Check the parameters */ + assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel)); + assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode)); + + /* Set PVD level bits only according to PVDLevel value */ + MODIFY_REG(PWR->CR2, (PWR_CR2_PVDFT | PWR_CR2_PVDRT), sConfigPVD->PVDLevel); + + /* Clear any previous config, in case no event or IT mode is selected */ + __HAL_PWR_PVD_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVD_EXTI_DISABLE_IT(); + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); + + /* Configure interrupt mode */ + if ((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT) + { + __HAL_PWR_PVD_EXTI_ENABLE_IT(); + } + + /* Configure event mode */ + if ((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT) + { + __HAL_PWR_PVD_EXTI_ENABLE_EVENT(); + } + + /* Configure the edge */ + if ((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); + } + + if ((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); + } + + return HAL_OK; +} + + +/** + * @brief Enable the Power Voltage Detector (PVD). + * @retval None + */ +void HAL_PWREx_EnablePVD(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_PVDE); +} + + +/** + * @brief Disable the Power Voltage Detector (PVD). + * @retval None + */ +void HAL_PWREx_DisablePVD(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_PVDE); +} +#endif /* PWR_PVD_SUPPORT */ + +#if defined(PWR_CR2_USV) +/** + * @brief Enable VDDUSB supply. + * @note Remove VDDUSB electrical and logical isolation, once VDDUSB supply is present. + * @retval None + */ +void HAL_PWREx_EnableVddUSB(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_USV); +} + +/** + * @brief Disable VDDUSB supply. + * @retval None + */ +void HAL_PWREx_DisableVddUSB(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_USV); +} +#endif /* PWR_CR2_USV */ + +#if defined(PWR_CR2_IOSV) +/** + * @brief Enable VDDIO2 supply. + * @note Remove VDDIO2 electrical and logical isolation, once VDDIO2 supply is present. + * @retval None + */ +void HAL_PWREx_EnableVddIO2(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_IOSV); +} + + +/** + * @brief Disable VDDIO2 supply. + * @retval None + */ +void HAL_PWREx_DisableVddIO2(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_IOSV); +} +#endif /* PWR_CR2_IOSV */ + +#if defined (PWR_PVM_SUPPORT) +/** + * @brief Enable the Power Voltage Monitoring for USB peripheral (power domain Vddio2) + * @retval None + */ +void HAL_PWREx_EnablePVMUSB(void) +{ + SET_BIT(PWR->CR2, PWR_PVM_USB); +} + +/** + * @brief Disable the Power Voltage Monitoring for USB peripheral (power domain Vddio2) + * @retval None + */ +void HAL_PWREx_DisablePVMUSB(void) +{ + CLEAR_BIT(PWR->CR2, PWR_PVM_USB); +} +#endif /* PWR_PVM_SUPPORT */ + +#if defined(PWR_PVM_SUPPORT) +/** + * @brief Configure the Peripheral Voltage Monitoring (PVM). + * @param sConfigPVM: pointer to a PWR_PVMTypeDef structure that contains the + * PVM configuration information. + * @note The API configures a single PVM according to the information contained + * in the input structure. To configure several PVMs, the API must be singly + * called for each PVM used. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage thresholds corresponding to each + * detection level and to each monitored supply. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PWREx_ConfigPVM(PWR_PVMTypeDef *sConfigPVM) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_PWR_PVM_TYPE(sConfigPVM->PVMType)); + assert_param(IS_PWR_PVM_MODE(sConfigPVM->Mode)); + + /* Configure EXTI 34 interrupts if so required: + scan through PVMType to detect which PVMx is set and + configure the corresponding EXTI line accordingly. */ + switch (sConfigPVM->PVMType) + { + case PWR_PVM_USB: + /* Clear any previous config. Keep it clear if no event or IT mode is selected */ + __HAL_PWR_PVM_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVM_EXTI_DISABLE_IT(); + __HAL_PWR_PVM_EXTI_DISABLE_FALLING_EDGE(); + __HAL_PWR_PVM_EXTI_DISABLE_RISING_EDGE(); + + /* Configure interrupt mode */ + if ((sConfigPVM->Mode & PVM_MODE_IT) == PVM_MODE_IT) + { + __HAL_PWR_PVM_EXTI_ENABLE_IT(); + } + + /* Configure event mode */ + if ((sConfigPVM->Mode & PVM_MODE_EVT) == PVM_MODE_EVT) + { + __HAL_PWR_PVM_EXTI_ENABLE_EVENT(); + } + + /* Configure the edge */ + if ((sConfigPVM->Mode & PVM_RISING_EDGE) == PVM_RISING_EDGE) + { + __HAL_PWR_PVM_EXTI_ENABLE_RISING_EDGE(); + } + + if ((sConfigPVM->Mode & PVM_FALLING_EDGE) == PVM_FALLING_EDGE) + { + __HAL_PWR_PVM_EXTI_ENABLE_FALLING_EDGE(); + } + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} +#endif /* PWR_PVM_SUPPORT */ +/** + * @brief Enable Internal Wake-up Line. + * @retval None + */ +void HAL_PWREx_EnableInternalWakeUpLine(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_EIWUL); +} + +/** + * @brief Disable Internal Wake-up Line. + * @retval None + */ +void HAL_PWREx_DisableInternalWakeUpLine(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_EIWUL); +} + +/** + * @brief Enable GPIO pull-up state in Standby and Shutdown modes. + * @note Set the relevant PUy bit of PWR_PUCRx register to configure the I/O in + * pull-up state in Standby and Shutdown modes. + * @note This state is effective in Standby and Shutdown modes only if APC bit + * is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @note The configuration is lost when exiting the Shutdown mode due to the + * power-on reset, maintained when exiting the Standby mode. + * @note To avoid any conflict at Standby and Shutdown modes exits, the corresponding + * PDy bit of PWR_PDCRx register is cleared unless it is reserved. + * @param GPIO Specify the IO port. This parameter can be PWR_GPIO_A, ..., PWR_GPIO_F + * to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for ports where less + * I/O pins are available) or the logical OR of several of them to set + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + SET_BIT(PWR->PUCRA, (GPIONumber & ~PWR_GPIO_BIT_14)); + CLEAR_BIT(PWR->PDCRA, (GPIONumber & ~PWR_GPIO_BIT_13)); + break; + + case PWR_GPIO_B: + SET_BIT(PWR->PUCRB, GPIONumber); + CLEAR_BIT(PWR->PDCRB, GPIONumber); + break; + + case PWR_GPIO_C: + SET_BIT(PWR->PUCRC, GPIONumber); + CLEAR_BIT(PWR->PDCRC, GPIONumber); + break; + + case PWR_GPIO_D: + SET_BIT(PWR->PUCRD, GPIONumber); + CLEAR_BIT(PWR->PDCRD, GPIONumber); + break; + +#if defined(GPI0E) + case PWR_GPIO_E: + SET_BIT(PWR->PUCRE, GPIONumber); + CLEAR_BIT(PWR->PDCRE, GPIONumber); + break; +#endif /* GPI0E */ + case PWR_GPIO_F: + SET_BIT(PWR->PUCRF, GPIONumber); + CLEAR_BIT(PWR->PDCRF, GPIONumber); + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Disable GPIO pull-up state in Standby mode and Shutdown modes. + * @note Reset the relevant PUy bit of PWR_PUCRx register used to configure the I/O + * in pull-up state in Standby and Shutdown modes. + * @param GPIO Specifies the IO port. This parameter can be PWR_GPIO_A, ..., PWR_GPIO_F + * to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for ports where less + * I/O pins are available) or the logical OR of several of them to reset + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + CLEAR_BIT(PWR->PUCRA, (GPIONumber & ~PWR_GPIO_BIT_14)); + break; + + case PWR_GPIO_B: + CLEAR_BIT(PWR->PUCRB, GPIONumber); + break; + + case PWR_GPIO_C: + CLEAR_BIT(PWR->PUCRC, GPIONumber); + break; + + case PWR_GPIO_D: + CLEAR_BIT(PWR->PUCRD, GPIONumber); + break; + +#if defined(GPI0E) + case PWR_GPIO_E: + CLEAR_BIT(PWR->PUCRE, GPIONumber); + break; +#endif /* GPI0E */ + case PWR_GPIO_F: + CLEAR_BIT(PWR->PUCRF, GPIONumber); + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Enable GPIO pull-down state in Standby and Shutdown modes. + * @note Set the relevant PDy bit of PWR_PDCRx register to configure the I/O in + * pull-down state in Standby and Shutdown modes. + * @note This state is effective in Standby and Shutdown modes only if APC bit + * is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @note The configuration is lost when exiting the Shutdown mode due to the + * power-on reset, maintained when exiting the Standby mode. + * @note To avoid any conflict at Standby and Shutdown modes exits, the corresponding + * PUy bit of PWR_PUCRx register is cleared unless it is reserved. + * @param GPIO Specify the IO port. This parameter can be PWR_GPIO_A..PWR_GPIO_F + * to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for ports where less + * I/O pins are available) or the logical OR of several of them to set + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + SET_BIT(PWR->PDCRA, (GPIONumber & ~PWR_GPIO_BIT_13)); + CLEAR_BIT(PWR->PUCRA, (GPIONumber & ~PWR_GPIO_BIT_14)); + break; + + case PWR_GPIO_B: + SET_BIT(PWR->PDCRB, GPIONumber); + CLEAR_BIT(PWR->PUCRB, GPIONumber); + break; + + case PWR_GPIO_C: + SET_BIT(PWR->PDCRC, GPIONumber); + CLEAR_BIT(PWR->PUCRC, GPIONumber); + break; + + case PWR_GPIO_D: + SET_BIT(PWR->PDCRD, GPIONumber); + CLEAR_BIT(PWR->PUCRD, GPIONumber); + break; + +#if defined(GPIOE) + case PWR_GPIO_E: + SET_BIT(PWR->PDCRE, GPIONumber); + CLEAR_BIT(PWR->PUCRE, GPIONumber); + break; +#endif /* GPI0E */ + case PWR_GPIO_F: + SET_BIT(PWR->PDCRF, GPIONumber); + CLEAR_BIT(PWR->PUCRF, GPIONumber); + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Disable GPIO pull-down state in Standby and Shutdown modes. + * @note Reset the relevant PDy bit of PWR_PDCRx register used to configure the I/O + * in pull-down state in Standby and Shutdown modes. + * @param GPIO Specifies the IO port. This parameter can be PWR_GPIO_A..PWR_GPIO_F + * to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for ports where less + * I/O pins are available) or the logical OR of several of them to reset + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + CLEAR_BIT(PWR->PDCRA, (GPIONumber & ~PWR_GPIO_BIT_13)); + break; + + case PWR_GPIO_B: + CLEAR_BIT(PWR->PDCRB, GPIONumber); + break; + + case PWR_GPIO_C: + CLEAR_BIT(PWR->PDCRC, GPIONumber); + break; + + case PWR_GPIO_D: + CLEAR_BIT(PWR->PDCRD, GPIONumber); + break; + +#if defined(GPIOE) + case PWR_GPIO_E: + CLEAR_BIT(PWR->PDCRE, GPIONumber); + break; +#endif /* GPI0E */ + case PWR_GPIO_F: + CLEAR_BIT(PWR->PDCRF, GPIONumber); + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Enable pull-up and pull-down configuration. + * @note When APC bit is set, the I/O pull-up and pull-down configurations defined in + * PWR_PUCRx and PWR_PDCRx registers are applied in Standby and Shutdown modes. + * @note Pull-up set by PUy bit of PWR_PUCRx register is not activated if the corresponding + * PDy bit of PWR_PDCRx register is also set (pull-down configuration priority is higher). + * HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown() APIs ensure there + * is no conflict when setting PUy or PDy bit. + * @retval None + */ +void HAL_PWREx_EnablePullUpPullDownConfig(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_APC); +} + +/** + * @brief Disable pull-up and pull-down configuration. + * @note When APC bit is cleared, the I/O pull-up and pull-down configurations defined in + * PWR_PUCRx and PWR_PDCRx registers are not applied in Standby and Shutdown modes. + * @retval None + */ +void HAL_PWREx_DisablePullUpPullDownConfig(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_APC); +} + +#if defined(PWR_CR3_RRS) +/** + * @brief Enable SRAM content retention in Standby mode. + * @note When RRS bit is set, SRAM is powered by the low-power regulator in + * Standby mode and its content is kept. + * @retval None + */ +void HAL_PWREx_EnableSRAMRetention(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_RRS); +} + + +/** + * @brief Disable SRAM content retention in Standby mode. + * @note When RRS bit is reset, SRAM is powered off in Standby mode + * and its content is lost. + * @retval None + */ +void HAL_PWREx_DisableSRAMRetention(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_RRS); +} +#endif /* PWR_CR3_RRS */ + +/** + * @brief Enable Flash Power Down. + * @note This API allows to enable flash power down capabilities in low power + * run, low power sleep and stop modes. + * @param PowerMode this can be a combination of following values: + * @arg @ref PWR_FLASHPD_LPRUN + * @arg @ref PWR_FLASHPD_LPSLEEP + * @arg @ref PWR_FLASHPD_STOP + * @retval None + */ +void HAL_PWREx_EnableFlashPowerDown(uint32_t PowerMode) +{ + assert_param(IS_PWR_FLASH_POWERDOWN(PowerMode)); + + PWR->CR1 |= PowerMode; +} + + +/** + * @brief Disable Flash Power Down. + * @note This API allows to disable flash power down capabilities in low power + * run, low power sleep and stop modes. + * @param PowerMode this can be a combination of following values: + * @arg @ref PWR_FLASHPD_LPRUN + * @arg @ref PWR_FLASHPD_LPSLEEP + * @arg @ref PWR_FLASHPD_STOP + * @retval None + */ +void HAL_PWREx_DisableFlashPowerDown(uint32_t PowerMode) +{ + assert_param(IS_PWR_FLASH_POWERDOWN(PowerMode)); + + PWR->CR1 &= ~PowerMode; +} + + +/** + * @brief Return Voltage Scaling Range. + * @retval VOS bit field: + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE1 + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE2 + */ +uint32_t HAL_PWREx_GetVoltageRange(void) +{ + return (PWR->CR1 & PWR_CR1_VOS); +} + + +/** + * @brief Configure the main regulator output voltage. + * @param VoltageScaling specifies the regulator output voltage to achieve + * a tradeoff between performance and power consumption. + * This parameter can be one of the following values: + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE1 Regulator voltage output range 1 mode, + * typical output voltage at 1.2 V, + * system frequency up to 64 MHz. + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE2 Regulator voltage output range 2 mode, + * typical output voltage at 1.0 V, + * system frequency up to 16 MHz. + * @note When moving from Range 1 to Range 2, the system frequency must be decreased to + * a value below 16 MHz before calling HAL_PWREx_ControlVoltageScaling() API. + * When moving from Range 2 to Range 1, the system frequency can be increased to + * a value up to 64 MHz after calling HAL_PWREx_ControlVoltageScaling() API. + * @note When moving from Range 2 to Range 1, the API waits for VOSF flag to be + * cleared before returning the status. If the flag is not cleared within + * 6 microseconds, HAL_TIMEOUT status is reported. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling) +{ + uint32_t wait_loop_index; + + assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling)); + + /* Modify voltage scaling range */ + MODIFY_REG(PWR->CR1, PWR_CR1_VOS, VoltageScaling); + + /* In case of Range 1 selected, we need to ensure that main regulator reaches new value */ + if (VoltageScaling == PWR_REGULATOR_VOLTAGE_SCALE1) + { + /* Set timeout value */ + wait_loop_index = ((PWR_VOSF_SETTING_DELAY_6_US * SystemCoreClock) / 1000000U) + 1U; + + /* Wait until VOSF is reset */ + while (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) + { + if (wait_loop_index != 0U) + { + wait_loop_index--; + } + else + { + return HAL_TIMEOUT; + } + } + } + + return HAL_OK; +} + + + +/** + * @brief Enter Low-power Run mode + * @note System clock frequency has to be decreased below 2 MHz before entering + * low power run mode + * @note In Low-power Run mode, all I/O pins keep the same state as in Run mode. + * @retval None + */ +void HAL_PWREx_EnableLowPowerRunMode(void) +{ + /* Set Regulator parameter */ + SET_BIT(PWR->CR1, PWR_CR1_LPR); +} + + +/** + * @brief Exit Low-power Run mode. + * @note Before HAL_PWREx_DisableLowPowerRunMode() completion, the function checks that + * REGLPF has been properly reset (otherwise, HAL_PWREx_DisableLowPowerRunMode + * returns HAL_TIMEOUT status). The system clock frequency can then be + * increased above 2 MHz. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void) +{ + uint32_t wait_loop_index = ((PWR_REGLPF_SETTING_DELAY_6_US * SystemCoreClock) / 1000000U) + 1U; + + /* Clear LPR bit */ + CLEAR_BIT(PWR->CR1, PWR_CR1_LPR); + + /* Wait until REGLPF is reset */ + while (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_REGLPF)) + { + if (wait_loop_index != 0U) + { + wait_loop_index--; + } + else + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + + +#if defined(PWR_SHDW_SUPPORT) +/** + * @brief Enter Shutdown mode. + * @note In Shutdown mode, the PLL, the HSI, the LSI and the HSE oscillators are switched + * off. The voltage regulator is disabled and Vcore domain is powered off. + * SRAM and registers contents are lost except for registers in the Backup domain. + * The BOR is not available. + * @note The I/Os can be configured either with a pull-up or pull-down or can + * be kept in analog state. + * HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown() + * respectively enable Pull Up and PullDown state. + * HAL_PWREx_DisableGPIOPullUp() & HAL_PWREx_DisableGPIOPullDown() + * disable the same. These states are effective in Standby mode only if + * APC bit is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @retval None + + * @retval None + */ +void HAL_PWREx_EnterSHUTDOWNMode(void) +{ + /* Set Shutdown mode */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_LOWPOWERMODE_SHUTDOWN); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* This option is used to ensure that store operations are completed */ +#if defined ( __CC_ARM) + __force_stores(); +#endif /* __CC_ARM */ + + /* Request Wait For Interrupt */ + __WFI(); +} +#endif /* PWR_SHDW_SUPPORT */ + +#if defined(PWR_PVD_SUPPORT) && defined(PWR_PVM_SUPPORT) +/** + * @brief This function handles the PWR PVD interrupt request. + * @note This API should be called under the PVD_IRQHandler(). + * @retval None + */ +void HAL_PWREx_PVD_PVM_IRQHandler(void) +{ + /* Check PWR PVD exti Rising flag */ + if (__HAL_PWR_PVD_EXTI_GET_RISING_FLAG() != 0x0U) + { + /* Clear PVD exti pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_RISING_FLAG(); + + /* PWR PVD interrupt rising user callback */ + HAL_PWREx_PVD_PVM_Rising_Callback(); + } + + /* Check PWR exti fallling flag */ + if (__HAL_PWR_PVD_EXTI_GET_FALLING_FLAG() != 0x0U) + { + /* Clear PVD exti pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_FALLING_FLAG(); + + /* PWR PVD interrupt falling user callback */ + HAL_PWREx_PVD_PVM_Falling_Callback(); + } + + /* Check PWR PVM exti Rising flag */ + if (__HAL_PWR_PVM_EXTI_GET_RISING_FLAG() != 0x0U) + { + /* Clear PVM exti pending bit */ + __HAL_PWR_PVM_EXTI_CLEAR_RISING_FLAG(); + + /* PWR PVD PVM interrupt rising user callback */ + HAL_PWREx_PVD_PVM_Rising_Callback(); + } + + /* Check PWR PVM exti fallling flag */ + if (__HAL_PWR_PVM_EXTI_GET_FALLING_FLAG() != 0x0U) + { + /* Clear PVM exti pending bit */ + __HAL_PWR_PVM_EXTI_CLEAR_FALLING_FLAG(); + + /* PWR PVM interrupt falling user callback */ + HAL_PWREx_PVD_PVM_Falling_Callback(); + } +} + +/** + * @brief PWR PVD interrupt rising callback + * @retval None + */ +__weak void HAL_PWREx_PVD_PVM_Rising_Callback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_PWR_PVD_Rising_Callback can be implemented in the user file + */ +} + +/** + * @brief PWR PVD interrupt Falling callback + * @retval None + */ +__weak void HAL_PWREx_PVD_PVM_Falling_Callback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_PWR_PVD_Falling_Callback can be implemented in the user file + */ +} +#elif defined(PWR_PVD_SUPPORT) +/** + * @brief This function handles the PWR PVD interrupt request. + * @note This API should be called under the PVD_IRQHandler(). + * @retval None + */ +void HAL_PWREx_PVD_IRQHandler(void) +{ + /* Check PWR exti Rising flag */ + if (__HAL_PWR_PVD_EXTI_GET_RISING_FLAG() != 0x0U) + { + /* Clear PVD exti pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_RISING_FLAG(); + + /* PWR PVD interrupt rising user callback */ + HAL_PWREx_PVD_Rising_Callback(); + } + + /* Check PWR exti fallling flag */ + if (__HAL_PWR_PVD_EXTI_GET_FALLING_FLAG() != 0x0U) + { + /* Clear PVD exti pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_FALLING_FLAG(); + + /* PWR PVD interrupt falling user callback */ + HAL_PWREx_PVD_Falling_Callback(); + } +} + +/** + * @brief PWR PVD interrupt rising callback + * @retval None + */ +__weak void HAL_PWREx_PVD_Rising_Callback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_PWR_PVD_Rising_Callback can be implemented in the user file + */ +} + +/** + * @brief PWR PVD interrupt Falling callback + * @retval None + */ +__weak void HAL_PWREx_PVD_Falling_Callback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_PWR_PVD_Falling_Callback can be implemented in the user file + */ +} + +#endif /* PWR_PVD_SUPPORT && PWR_PVM_SUPPORT */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c new file mode 100644 index 0000000..38a6175 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c @@ -0,0 +1,1472 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rcc.c + * @author MCD Application Team + * @brief RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Reset and Clock Control (RCC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### RCC specific features ##### + ============================================================================== + [..] + After reset the device is running from High Speed Internal oscillator + (from 8 MHz to reach 16MHz) with Flash 0 wait state. Flash prefetch buffer, + D-Cache and I-Cache are disabled, and all peripherals are off except internal + SRAM, Flash and JTAG. + + (+) There is no prescaler on High speed (AHB) and Low speed (APB) buses: + all peripherals mapped on these buses are running at HSI speed. + (+) The clock for all peripherals is switched off, except the SRAM and FLASH. + (+) All GPIOs are in analog mode, except the JTAG pins which + are assigned to be used for debug purpose. + + [..] + Once the device started from reset, the user application has to: + (+) Configure the clock source to be used to drive the System clock + (if the application needs higher frequency/performance) + (+) Configure the System clock frequency and Flash settings + (+) Configure the AHB and APB buses prescalers + (+) Enable the clock for the peripheral(s) to be used + (+) Configure the clock source(s) for peripherals which clocks are not + derived from the System clock (RTC, ADC, RNG, HSTIM) + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup RCC RCC + * @brief RCC HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup RCC_Private_Constants RCC Private Constants + * @{ + */ +#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT +#define HSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ +#define LSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ +#define PLL_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ + +#if defined(RCC_HSI48_SUPPORT) +#define HSI48_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ +#endif /* RCC_HSI48_SUPPORT */ +#define CLOCKSWITCH_TIMEOUT_VALUE (5000U) /* 5 s */ + +#define PLLSOURCE_NONE (0U) +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RCC_Private_Macros RCC Private Macros + * @{ + */ + +#define RCC_GET_MCO_GPIO_PIN(__RCC_MCOx__) ((__RCC_MCOx__) & GPIO_PIN_MASK) + +#define RCC_GET_MCO_GPIO_AF(__RCC_MCOx__) (((__RCC_MCOx__) & RCC_MCO_GPIOAF_MASK) >> RCC_MCO_GPIOAF_POS) + +#define RCC_GET_MCO_GPIO_INDEX(__RCC_MCOx__) (((__RCC_MCOx__) & RCC_MCO_GPIOPORT_MASK) >> RCC_MCO_GPIOPORT_POS) + +#define RCC_GET_MCO_GPIO_PORT(__RCC_MCOx__) (IOPORT_BASE + ((0x00000400UL) * RCC_GET_MCO_GPIO_INDEX(__RCC_MCOx__))) + +#define RCC_PLL_OSCSOURCE_CONFIG(__HAL_RCC_PLLSOURCE__) \ + (MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (uint32_t)(__HAL_RCC_PLLSOURCE__))) +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_Private_Variables RCC Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to configure the internal and external oscillators + (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System buses clocks (SYSCLK, AHB, APB) + + [..] Internal/external clock and PLL configuration + (+) HSI (high-speed internal): 16 MHz factory-trimmed RC used directly or through + the PLL as System clock source. + + (+) LSI (low-speed internal): 32 KHz low consumption RC used as IWDG and/or RTC + clock source. + + (+) HSE (high-speed external): 4 to 48 MHz crystal oscillator used directly or + through the PLL as System clock source. Can be used also optionally as RTC clock source. + + (+) LSE (low-speed external): 32.768 KHz oscillator used optionally as RTC clock source. + + (+) PLL (clocked by HSI, HSE) providing up to three independent output clocks: + (++) The first output (R) is used to generate the high speed system clock (up to 64MHz). + (++) The second output(Q) is used to generate the clock for the random analog generator and HStim. + (++) The Third output (P) is used to generate the clock for the Analog to Digital Converter and I2S. + + (+) CSS (Clock security system): once enabled, if a HSE or LSE clock failure occurs + (HSE used directly or through PLL as System clock source), the System clock + is automatically switched respectively to HSI or LSI and an interrupt is generated + if enabled. The interrupt is linked to the Cortex-M0+ NMI (Non-Maskable Interrupt) + exception vector. + + (+) MCOx (microcontroller clock output): + (++) MCO1 used to output LSI, HSI48(*), HSI, LSE, HSE or main PLL clock (through a configurable prescaler) on PA8 pin. + (++) MCO2(*) used to output LSI, HSI48(*), HSI, LSE, HSE, main PLLR clock, PLLQ clock, PLLP clock, RTC clock or RTC_Wakeup (through a configurable prescaler) on PA10 pin. + (*) available on certain devices only + + [..] System, AHB and APB buses clocks configuration + (+) Several clock sources can be used to drive the System clock (SYSCLK): HSI, + HSE, LSI, LSE and main PLL. + The AHB clock (HCLK) is derived from System clock through configurable + prescaler and used to clock the CPU, memory and peripherals mapped + on AHB bus (DMA, GPIO...).and APB (PCLK1) clock is derived + from AHB clock through configurable prescalers and used to clock + the peripherals mapped on these buses. You can use + "HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks. + + -@- All the peripheral clocks are derived from the System clock (SYSCLK) except: + + (+@) RTC: the RTC clock can be derived either from the LSI, LSE or HSE clock + divided by 2 to 31. + You have to use __HAL_RCC_RTC_ENABLE() and HAL_RCCEx_PeriphCLKConfig() function + to configure this clock. + + (+@) RNG(*) requires a frequency equal or lower than 48 MHz. + This clock is derived from the main PLL or HSI or System clock. + (*) available on certain devices only + + (+@) IWDG clock which is always the LSI clock. + + + (+) The maximum frequency of the SYSCLK, HCLK, PCLK is 64 MHz. + Depending on the device voltage range, the maximum frequency should be + adapted accordingly. + + @endverbatim + + (++) Table 1. HCLK clock frequency. + (++) +-------------------------------------------------------+ + (++) | Latency | HCLK clock frequency (MHz) | + (++) | |-------------------------------------| + (++) | | voltage range 1 | voltage range 2 | + (++) | | 1.2 V | 1.0 V | + (++) |-----------------|------------------|------------------| + (++) |0WS(1 CPU cycles)| HCLK <= 24 | HCLK <= 8 | + (++) |-----------------|------------------|------------------| + (++) |1WS(2 CPU cycles)| HCLK <= 48 | HCLK <= 16 | + (++) |-----------------|------------------|------------------| + (++) |2WS(3 CPU cycles)| HCLK <= 64 | - | + (++) |-----------------|------------------|------------------| + * @{ + */ + +/** + * @brief Reset the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI ON and used as system clock source + * - HSE, PLL OFF + * - AHB and APB prescaler set to 1. + * - CSS, MCO1 OFF + * - All interrupts disabled + * @note This function does not modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_DeInit(void) +{ + uint32_t tickstart; + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Set HSION bit to the reset value */ + SET_BIT(RCC->CR, RCC_CR_HSION); + + /* Wait till HSI is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Set HSITRIM[6:0] bits to the reset value */ + RCC->ICSCR = RCC_ICSCR_HSITRIM_6; + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Reset CFGR register (HSI is selected as system clock source) */ + RCC->CFGR = 0x00000000u; + + /* Wait till HSI is ready */ + while (READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != 0U) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Clear CR register in 2 steps: first to clear HSEON in case bypass was enabled */ + RCC->CR = RCC_CR_HSION; + + /* Then again to HSEBYP in case bypass was enabled */ + RCC->CR = RCC_CR_HSION; + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* once PLL is OFF, reset PLLCFGR register to default value */ + RCC->PLLCFGR = RCC_PLLCFGR_PLLN_4; + + /* Disable all interrupts */ + RCC->CIER = 0x00000000u; + + /* Clear all flags */ + RCC->CICR = 0xFFFFFFFFu; + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HSI_VALUE; + + /* Adapt Systick interrupt period */ + if (HAL_InitTick(uwTickPrio) != HAL_OK) + { + return HAL_ERROR; + } + else + { + return HAL_OK; + } +} + +/** + * @brief Initialize the RCC Oscillators according to the specified parameters in the + * @ref RCC_OscInitTypeDef. + * @param RCC_OscInitStruct pointer to a @ref RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC Oscillators. + * @note The PLL is not disabled when used as system clock. + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this function. User should request a transition to HSE Off + * first and then to HSE On or HSE Bypass. + * @note Transition LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this function. User should request a transition to LSE Off + * first and then to LSE On or LSE Bypass. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + uint32_t tickstart; + uint32_t temp_sysclksrc; + uint32_t temp_pllckcfg; + + /* Check Null pointer */ + if (RCC_OscInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); + + /*------------------------------- HSE Configuration ------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) + { + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); + + temp_sysclksrc = __HAL_RCC_GET_SYSCLK_SOURCE(); + temp_pllckcfg = __HAL_RCC_GET_PLL_OSCSOURCE(); + + /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */ + if (((temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (temp_pllckcfg == RCC_PLLSOURCE_HSE)) + || (temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_HSE)) + { + if ((READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Set the new HSE configuration ---------------------------------------*/ + __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); + + /* Check the HSE State */ + if (RCC_OscInitStruct->HSEState != RCC_HSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSE is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSE is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*----------------------------- HSI Configuration --------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); + assert_param(IS_RCC_HSI_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); + assert_param(IS_RCC_HSIDIV(RCC_OscInitStruct->HSIDiv)); + + /* Check if HSI16 is used as system clock or as PLL source when PLL is selected as system clock */ + temp_sysclksrc = __HAL_RCC_GET_SYSCLK_SOURCE(); + temp_pllckcfg = __HAL_RCC_GET_PLL_OSCSOURCE(); + if (((temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (temp_pllckcfg == RCC_PLLSOURCE_HSI)) + || (temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_HSI)) + { + /* When HSI is used as system clock or as PLL input clock it can not be disabled */ + if ((READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) && (RCC_OscInitStruct->HSIState == RCC_HSI_OFF)) + { + return HAL_ERROR; + } + /* Otherwise, just the calibration is allowed */ + else + { + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + + if (temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_HSI) + { + /* Adjust the HSI16 division factor */ + __HAL_RCC_HSI_CONFIG(RCC_OscInitStruct->HSIDiv); + + /* Update the SystemCoreClock global variable with HSISYS value */ + SystemCoreClock = (HSI_VALUE / (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV)) >> RCC_CR_HSIDIV_Pos))); + } + + /* Adapt Systick interrupt period */ + if (HAL_InitTick(uwTickPrio) != HAL_OK) + { + return HAL_ERROR; + } + } + } + else + { + /* Check the HSI State */ + if (RCC_OscInitStruct->HSIState != RCC_HSI_OFF) + { + /* Configure the HSI16 division factor */ + __HAL_RCC_HSI_CONFIG(RCC_OscInitStruct->HSIDiv); + + /* Enable the Internal High Speed oscillator (HSI16). */ + __HAL_RCC_HSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + else + { + /* Disable the Internal High Speed oscillator (HSI16). */ + __HAL_RCC_HSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------ LSI Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) + { + /* Check the parameters */ + assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); + + /* Check if LSI is used as system clock */ + if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_LSI) + { + /* When LSI is used as system clock it will not be disabled */ + if ((((RCC->CSR) & RCC_CSR_LSIRDY) != 0U) && (RCC_OscInitStruct->LSIState == RCC_LSI_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Check the LSI State */ + if (RCC_OscInitStruct->LSIState != RCC_LSI_OFF) + { + /* Enable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + while (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is disabled */ + while (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------ LSE Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) + { + FlagStatus pwrclkchanged = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); + + /* When the LSE is used as system clock, it is not allowed disable it */ + if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_LSE) + { + if ((((RCC->BDCR) & RCC_BDCR_LSERDY) != 0U) && (RCC_OscInitStruct->LSEState == RCC_LSE_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Update LSE configuration in Backup Domain control register */ + /* Requires to enable write access to Backup Domain of necessary */ + if (__HAL_RCC_PWR_IS_CLK_DISABLED() != 0U) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + if (HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR1, PWR_CR1_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while (HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + { + if ((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Set the new LSE configuration -----------------------------------------*/ + __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); + + /* Check the LSE State */ + if (RCC_OscInitStruct->LSEState != RCC_LSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is disabled */ + while (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Restore clock configuration if changed */ + if (pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + } +#if defined(RCC_HSI48_SUPPORT) + /*------------------------------ HSI48 Configuration -----------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI48(RCC_OscInitStruct->HSI48State)); + + /* Check the LSI State */ + if (RCC_OscInitStruct->HSI48State != RCC_HSI48_OFF) + { + /* Enable the Internal Low Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI48 is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSI48RDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI48 is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_HSI48RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } +#endif /* RCC_HSI48_SUPPORT */ + /*-------------------------------- PLL Configuration -----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); + + if (RCC_OscInitStruct->PLL.PLLState != RCC_PLL_NONE) + { + /* Check if the PLL is used as system clock or not */ + if (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK) + { + if (RCC_OscInitStruct->PLL.PLLState == RCC_PLL_ON) + { + /* Check the parameters */ + assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); + assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM)); + assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN)); + assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP)); +#if defined(RCC_PLLQ_SUPPORT) + assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ)); +#endif /* RCC_PLLQ_SUPPORT */ + assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR)); + + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the main PLL clock source, multiplication and division factors. */ +#if defined(RCC_PLLQ_SUPPORT) + __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, + RCC_OscInitStruct->PLL.PLLM, + RCC_OscInitStruct->PLL.PLLN, + RCC_OscInitStruct->PLL.PLLP, + RCC_OscInitStruct->PLL.PLLQ, + RCC_OscInitStruct->PLL.PLLR); +#else /* !RCC_PLLQ_SUPPORT */ + __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, + RCC_OscInitStruct->PLL.PLLM, + RCC_OscInitStruct->PLL.PLLN, + RCC_OscInitStruct->PLL.PLLP, + RCC_OscInitStruct->PLL.PLLR); +#endif /* RCC_PLLQ_SUPPORT */ + + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + + /* Enable PLLR Clock output. */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLRCLK); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + /* Unselect main PLL clock source and disable main PLL outputs to save power */ +#if defined(RCC_PLLQ_SUPPORT) + RCC->PLLCFGR &= ~(RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLPEN | RCC_PLLCFGR_PLLQEN | RCC_PLLCFGR_PLLREN); +#else + RCC->PLLCFGR &= ~(RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLPEN | RCC_PLLCFGR_PLLREN); +#endif /* RCC_PLLQ_SUPPORT */ + } + } + else + { + /* Check if there is a request to disable the PLL used as System clock source */ + if ((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) + { + return HAL_ERROR; + } + else + { + /* Do not return HAL_ERROR if request repeats the current configuration */ + temp_pllckcfg = RCC->PLLCFGR; + if ((READ_BIT(temp_pllckcfg, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + (READ_BIT(temp_pllckcfg, RCC_PLLCFGR_PLLM) != RCC_OscInitStruct->PLL.PLLM) || + (READ_BIT(temp_pllckcfg, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos)) || + (READ_BIT(temp_pllckcfg, RCC_PLLCFGR_PLLP) != RCC_OscInitStruct->PLL.PLLP) || +#if defined (RCC_PLLQ_SUPPORT) + (READ_BIT(temp_pllckcfg, RCC_PLLCFGR_PLLQ) != RCC_OscInitStruct->PLL.PLLQ) || +#endif /* RCC_PLLQ_SUPPORT */ + (READ_BIT(temp_pllckcfg, RCC_PLLCFGR_PLLR) != RCC_OscInitStruct->PLL.PLLR)) + { + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} + +/** + * @brief Initialize the CPU, AHB and APB buses clocks according to the specified + * parameters in the RCC_ClkInitStruct. + * @param RCC_ClkInitStruct pointer to a @ref RCC_ClkInitTypeDef structure that + * contains the configuration information for the RCC peripheral. + * @param FLatency FLASH Latency + * This parameter can be one of the following values: + * @arg FLASH_LATENCY_0 FLASH 0 Latency cycle + * @arg FLASH_LATENCY_1 FLASH 1 Latency cycle + * + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency + * and updated by @ref HAL_RCC_GetHCLKFreq() function called within this function + * + * @note The HSI is used by default as system clock source after + * startup from Reset, wake-up from STANDBY mode. After restart from Reset, + * the HSI frequency is set to 8 Mhz, then it reaches its default value 16 MHz. + * + * @note The HSI can be selected as system clock source after + * from STOP modes or in case of failure of the HSE used directly or indirectly + * as system clock (if the Clock Security System CSS is enabled). + * + * @note The LSI can be selected as system clock source after + * in case of failure of the LSE used directly or indirectly + * as system clock (if the Clock Security System LSECSS is enabled). + * + * @note A switch from one clock source to another occurs only if the target + * clock source is ready (clock stable after startup delay or PLL locked). + * If a clock source which is not yet ready is selected, the switch will + * occur when the clock source is ready. + * + * @note You can use @ref HAL_RCC_GetClockConfig() function to know which clock is + * currently used as system clock source. + * + * @note Depending on the device voltage range, the software has to set correctly + * HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency + * (for more details refer to section above "Initialization/de-initialization functions") + * @retval None + */ +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) +{ + uint32_t tickstart; + + /* Check Null pointer */ + if (RCC_ClkInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType)); + assert_param(IS_FLASH_LATENCY(FLatency)); + + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the FLASH clock + (HCLK) and the supply voltage of the device. */ + + /* Increasing the number of wait states because of higher CPU frequency */ + if (FLatency > __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by polling the FLASH_ACR register */ + tickstart = HAL_GetTick(); + + while ((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /*-------------------------- HCLK Configuration --------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + { + /* Set the highest APB divider in order to ensure that we do not go through + a non-spec phase whatever we decrease or increase HCLK. */ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_HCLK_DIV16); + } + + /* Set the new HCLK clock divider */ + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } + + /*------------------------- SYSCLK Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) + { + assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); + + /* HSE is selected as System Clock Source */ + if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) + { + /* Check the HSE ready flag */ + if (READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0U) + { + return HAL_ERROR; + } + } + /* PLL is selected as System Clock Source */ + else if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) + { + /* Check the PLL ready flag */ + if (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + { + return HAL_ERROR; + } + } + /* HSI is selected as System Clock Source */ + else if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSI) + { + /* Check the HSI ready flag */ + if (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + { + return HAL_ERROR; + } + } + /* LSI is selected as System Clock Source */ + else if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_LSI) + { + /* Check the LSI ready flag */ + if (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == 0U) + { + return HAL_ERROR; + } + } + /* LSE is selected as System Clock Source */ + else + { + /* Check the LSE ready flag */ + if (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == 0U) + { + return HAL_ERROR; + } + } + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, RCC_ClkInitStruct->SYSCLKSource); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Decreasing the number of wait states because of lower CPU frequency */ + if (FLatency < __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by polling the FLASH_ACR register */ + tickstart = HAL_GetTick(); + + while ((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /*-------------------------- PCLK1 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_ClkInitStruct->APB1CLKDivider); + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = (HAL_RCC_GetSysClockFreq() >> ((AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos]) & 0x1FU)); + + /* Configure the source of time base considering new system clocks settings*/ + return HAL_InitTick(uwTickPrio); +} + +/** + * @} + */ + +/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions + * @brief RCC clocks control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to: + + (+) Output clock to MCO pin. + (+) Retrieve current clock frequencies. + (+) Enable the Clock Security System. + +@endverbatim + * @{ + */ + +/** + * @brief Select the clock source to output on MCO1 pin(PA8) or MC02 pin (PA10)(*). + * @note PA8, PA10(*) should be configured in alternate function mode. + * @param RCC_MCOx specifies the output direction for the clock source. + * For STM32G0xx family this parameter can have only one value: + * @arg @ref RCC_MCO_PA8 Clock source to output on MCO1 pin(PA8). + * @arg @ref RCC_MCO_PA9 Clock source to output on MCO1 pin(PA9). + * @arg @ref RCC_MCO_PD10 Clock source to output on MCO1 pin(PD10)(*). + * @arg @ref RCC_MCO_PF2 Clock source to output on MCO1 pin(PF2)(*). + * @arg @ref RCC_MCO_PA10 Clock source to output on MCO2 pin(PA10)(*). + * @arg @ref RCC_MCO_PA15 Clock source to output on MCO2 pin(PA15)(*). + * @arg @ref RCC_MCO_PB2 Clock source to output on MCO2 pin(PB2)(*). + * @arg @ref RCC_MCO_PD7 Clock source to output on MCO2 pin(PD7)(*). + * @param RCC_MCOSource specifies the clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK MCO output disabled, no clock on MCO + * @arg @ref RCC_MCO1SOURCE_SYSCLK system clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 clock selected as MCO source for devices with HSI48(*) + * @arg @ref RCC_MCO1SOURCE_HSI HSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSE HSE clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLLCLK main PLLR clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSI LSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSE LSE clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLLPCLK PLLP clock selected as MCO1 source(*) + * @arg @ref RCC_MCO1SOURCE_PLLQCLK PLLQ clock selected as MCO1 source(*) + * @arg @ref RCC_MCO1SOURCE_RTCCLK RTC clock selected as MCO1 source(*) + * @arg @ref RCC_MCO1SOURCE_RTC_WKUP RTC_Wakeup selected as MCO1 source(*) + * @arg @ref RCC_MCO2SOURCE_NOCLOCK MCO2 output disabled, no clock on MCO2(*) + * @arg @ref RCC_MCO2SOURCE_SYSCLK system clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_HSI48 HSI48 clock selected as MCO2 source for devices with HSI48(*) + * @arg @ref RCC_MCO2SOURCE_HSI HSI clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_HSE HSE clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_PLLCLK main PLLR clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_LSI LSI clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_LSE LSE clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_PLLPCLK PLLP clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_PLLQCLK PLLQ clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_RTCCLK RTC clock selected as MCO2 source(*) + * @arg @ref RCC_MCO2SOURCE_RTC_WKUP RTC_Wakeup selected as MCO2 source(*) + * @param RCC_MCODiv specifies the MCO prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 no division applied to MCO clock + * @arg @ref RCC_MCODIV_2 division by 2 applied to MCO clock + * @arg @ref RCC_MCODIV_4 division by 4 applied to MCO clock + * @arg @ref RCC_MCODIV_8 division by 8 applied to MCO clock + * @arg @ref RCC_MCODIV_16 division by 16 applied to MCO clock + * @arg @ref RCC_MCODIV_32 division by 32 applied to MCO clock + * @arg @ref RCC_MCODIV_64 division by 64 applied to MCO clock + * @arg @ref RCC_MCODIV_128 division by 128 applied to MCO clock + * @arg @ref RCC_MCO2DIV_1 no division applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_2 division by 2 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_4 division by 4 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_8 division by 8 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_16 division by 16 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_32 division by 32 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_64 division by 64 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_128 division by 128 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_256 division by 256 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_512 division by 512 applied to MCO2 clock(*) + * @arg @ref RCC_MCO2DIV_1024 division by 1024 applied to MCO2 clock(*) + * + * (*) Feature not available on all devices of the family + * @retval None + */ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) +{ + GPIO_InitTypeDef gpio_initstruct; + uint32_t mcoindex; + uint32_t mco_gpio_index; + GPIO_TypeDef * mco_gpio_port; + + /* Check the parameters */ + assert_param(IS_RCC_MCO(RCC_MCOx)); + + /* Common GPIO init parameters */ + gpio_initstruct.Mode = GPIO_MODE_AF_PP; + gpio_initstruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + gpio_initstruct.Pull = GPIO_NOPULL; + + /* Get MCOx selection */ + mcoindex = RCC_MCOx & RCC_MCO_INDEX_MASK; + + /* Get MCOx GPIO Port */ + mco_gpio_port = (GPIO_TypeDef *) RCC_GET_MCO_GPIO_PORT(RCC_MCOx); + + /* MCOx Clock Enable */ + mco_gpio_index = RCC_GET_MCO_GPIO_INDEX(RCC_MCOx); + SET_BIT(RCC->IOPENR, (1UL << mco_gpio_index )); + + /* Configure the MCOx pin in alternate function mode */ + gpio_initstruct.Pin = RCC_GET_MCO_GPIO_PIN(RCC_MCOx); + gpio_initstruct.Alternate = RCC_GET_MCO_GPIO_AF(RCC_MCOx); + HAL_GPIO_Init(mco_gpio_port, &gpio_initstruct); + + if (mcoindex == RCC_MCO1_INDEX) + { + assert_param(IS_RCC_MCODIV(RCC_MCODiv)); + assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); + /* Mask MCOSEL[] and MCOPRE[] bits then set MCO clock source and prescaler */ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE), (RCC_MCOSource | RCC_MCODiv)); + } +#if defined(RCC_MCO2_SUPPORT) + else if (mcoindex == RCC_MCO2_INDEX) + { + assert_param(IS_RCC_MCO2DIV(RCC_MCODiv)); + assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource)); + /* Mask MCOSEL[] and MCOPRE[] bits then set MCO clock source and prescaler */ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2SEL | RCC_CFGR_MCO2PRE), (RCC_MCOSource | RCC_MCODiv)); + } +#endif /* RCC_MCO2_SUPPORT */ + else + { + /* Nothing to do */ + } +} + +/** + * @brief Return the SYSCLK frequency. + * + * @note The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE/HSIDIV(*) + * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**) + * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**), + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * @note If SYSCLK source is LSI, function returns values based on LSI_VALUE(***) + * @note If SYSCLK source is LSE, function returns values based on LSE_VALUE(****) + * @note (*) HSI_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (**) HSE_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * @note (***) LSE_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value + * 32768 Hz). + * @note (****) LSI_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value + * 32000 Hz). + * + * @note The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @note This function can be used by the user application to compute the + * baudrate for the communication peripherals or configure other parameters. + * + * @note Each time SYSCLK changes, this function must be called to update the + * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * + * @retval SYSCLK frequency + */ +uint32_t HAL_RCC_GetSysClockFreq(void) +{ + uint32_t pllvco, pllsource, pllr, pllm, hsidiv; + uint32_t sysclockfreq; + + if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI) + { + /* HSISYS can be derived for HSI16 */ + hsidiv = (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV)) >> RCC_CR_HSIDIV_Pos)); + + /* HSI used as system clock source */ + sysclockfreq = (HSI_VALUE / hsidiv); + } + else if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE) + { + /* HSE used as system clock source */ + sysclockfreq = HSE_VALUE; + } + else if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) + { + /* PLL used as system clock source */ + + /* PLL_VCO = ((HSE_VALUE or HSI_VALUE)/ PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); + pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U ; + + switch (pllsource) + { + case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); + break; + + case RCC_PLLSOURCE_HSI: /* HSI16 used as PLL clock source */ + default: /* HSI16 used as PLL clock source */ + pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos) ; + break; + } + pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1U); + sysclockfreq = pllvco / pllr; + } + else if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_LSE) + { + /* LSE used as system clock source */ + sysclockfreq = LSE_VALUE; + } + else if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_LSI) + { + /* LSI used as system clock source */ + sysclockfreq = LSI_VALUE; + } + else + { + sysclockfreq = 0U; + } + + return sysclockfreq; +} + +/** + * @brief Return the HCLK frequency. + * @note Each time HCLK changes, this function must be called to update the + * right HCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency. + * @retval HCLK frequency in Hz + */ +uint32_t HAL_RCC_GetHCLKFreq(void) +{ + return SystemCoreClock; +} + +/** + * @brief Return the PCLK1 frequency. + * @note Each time PCLK1 changes, this function must be called to update the + * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK1 frequency in Hz + */ +uint32_t HAL_RCC_GetPCLK1Freq(void) +{ + /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ + return ((uint32_t)(__LL_RCC_CALC_PCLK1_FREQ(HAL_RCC_GetHCLKFreq(), LL_RCC_GetAPB1Prescaler()))); +} + +/** + * @brief Configure the RCC_OscInitStruct according to the internal + * RCC configuration registers. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * will be configured. + * @retval None + */ +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + /* Check the parameters */ + assert_param(RCC_OscInitStruct != (void *)NULL); + + /* Set all possible values for the Oscillator type parameter ---------------*/ +#if defined(RCC_HSI48_SUPPORT) + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | \ + RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_HSI48; +#else + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | \ + RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI; +#endif /* RCC_HSI48_SUPPORT */ + + /* Get the HSE configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_HSEBYP) == RCC_CR_HSEBYP) + { + RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; + } + else if ((RCC->CR & RCC_CR_HSEON) == RCC_CR_HSEON) + { + RCC_OscInitStruct->HSEState = RCC_HSE_ON; + } + else + { + RCC_OscInitStruct->HSEState = RCC_HSE_OFF; + } + + /* Get the HSI configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_HSION) == RCC_CR_HSION) + { + RCC_OscInitStruct->HSIState = RCC_HSI_ON; + } + else + { + RCC_OscInitStruct->HSIState = RCC_HSI_OFF; + } + RCC_OscInitStruct->HSICalibrationValue = ((RCC->ICSCR & RCC_ICSCR_HSITRIM) >> RCC_ICSCR_HSITRIM_Pos); + RCC_OscInitStruct->HSIDiv = (RCC->CR & RCC_CR_HSIDIV); + + /* Get the LSE configuration -----------------------------------------------*/ + if ((RCC->BDCR & RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) + { + RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; + } + else if ((RCC->BDCR & RCC_BDCR_LSEON) == RCC_BDCR_LSEON) + { + RCC_OscInitStruct->LSEState = RCC_LSE_ON; + } + else + { + RCC_OscInitStruct->LSEState = RCC_LSE_OFF; + } + + /* Get the LSI configuration -----------------------------------------------*/ + if ((RCC->CSR & RCC_CSR_LSION) == RCC_CSR_LSION) + { + RCC_OscInitStruct->LSIState = RCC_LSI_ON; + } + else + { + RCC_OscInitStruct->LSIState = RCC_LSI_OFF; + } + +#if defined(RCC_HSI48_SUPPORT) + /* Get the HSI48 configuration ---------------------------------------------*/ + if (READ_BIT(RCC->CR, RCC_CR_HSI48ON) == RCC_CR_HSI48ON) + { + RCC_OscInitStruct->HSI48State = RCC_HSI48_ON; + } + else + { + RCC_OscInitStruct->HSI48State = RCC_HSI48_OFF; + } +#endif /* RCC_HSI48_SUPPORT */ + + /* Get the PLL configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_PLLON) == RCC_CR_PLLON) + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; + } + else + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; + } + RCC_OscInitStruct->PLL.PLLSource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); + RCC_OscInitStruct->PLL.PLLM = (RCC->PLLCFGR & RCC_PLLCFGR_PLLM); + RCC_OscInitStruct->PLL.PLLN = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); + RCC_OscInitStruct->PLL.PLLP = (RCC->PLLCFGR & RCC_PLLCFGR_PLLP); +#if defined(RCC_PLLQ_SUPPORT) + RCC_OscInitStruct->PLL.PLLQ = (RCC->PLLCFGR & RCC_PLLCFGR_PLLQ); +#endif /* RCC_PLLQ_SUPPORT */ + RCC_OscInitStruct->PLL.PLLR = (RCC->PLLCFGR & RCC_PLLCFGR_PLLR); +} + +/** + * @brief Configure the RCC_ClkInitStruct according to the internal + * RCC configuration registers. + * @param RCC_ClkInitStruct Pointer to a @ref RCC_ClkInitTypeDef structure that + * will be configured. + * @param pFLatency Pointer on the Flash Latency. + * @retval None + */ +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) +{ + /* Check the parameters */ + assert_param(RCC_ClkInitStruct != (void *)NULL); + assert_param(pFLatency != (void *)NULL); + + /* Set all possible values for the Clock type parameter --------------------*/ + RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1; + + /* Get the SYSCLK configuration --------------------------------------------*/ + RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW); + + /* Get the HCLK configuration ----------------------------------------------*/ + RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE); + + /* Get the APB1 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE); + + + /* Get the Flash Wait State (Latency) configuration ------------------------*/ + *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY); +} + +/** + * @brief Enable the Clock Security System. + * @note If a failure is detected on the HSE oscillator clock, this oscillator + * is automatically disabled and an interrupt is generated to inform the + * software about the failure (Clock Security System Interrupt, CSSI), + * allowing the MCU to perform rescue operations. The CSSI is linked to + * the Cortex-M0+ NMI (Non-Maskable Interrupt) exception vector. + * @note The Clock Security System can only be cleared by reset. + * @retval None + */ +void HAL_RCC_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSSON) ; +} + +/** + * @brief Enable the LSE Clock Security System. + * @note If a failure is detected on the LSE oscillator clock, this oscillator + * is automatically disabled and an interrupt is generated to inform the + * software about the failure (Clock Security System Interrupt, CSSI), + * allowing the MCU to perform rescue operations. The CSSI is linked to + * the Cortex-M0+ NMI (Non-Maskable Interrupt) exception vector. + * @note The LSE Clock Security System Detection bit (LSECSSD in BDCR) can only be + * cleared by a backup domain reset. + * @retval None + */ +void HAL_RCC_EnableLSECSS(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; +} + +/** + * @brief Disable the LSE Clock Security System. + * @note After LSE failure detection, the software must disable LSECSSON + * @note The Clock Security System can only be cleared by reset otherwise. + * @retval None + */ +void HAL_RCC_DisableLSECSS(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; +} + +/** + * @brief Handle the RCC Clock Security System interrupt request. + * @note This API should be called under the NMI_Handler(). + * @retval None + */ +void HAL_RCC_NMI_IRQHandler(void) +{ + uint32_t itflag = RCC->CIFR; + + /* Clear interrupt flags related to CSS */ + RCC->CICR = (itflag & (RCC_CIFR_CSSF | RCC_CIFR_LSECSSF)); + + /* Check RCC CSSF interrupt flag */ + if ((itflag & RCC_CIFR_CSSF) != 0x00u) + { + /* RCC Clock Security System interrupt user callback */ + HAL_RCC_CSSCallback(); + } + + /* Check RCC LSECSSF interrupt flag */ + if ((itflag & RCC_CIFR_LSECSSF) != 0x00u) + { + /* RCC Clock Security System interrupt user callback */ + HAL_RCC_LSECSSCallback(); + } +} + +/** + * @brief Handle the RCC HSE Clock Security System interrupt callback. + * @retval none + */ +__weak void HAL_RCC_CSSCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCC_CSSCallback should be implemented in the user file + */ +} + +/** + * @brief RCC LSE Clock Security System interrupt callback. + * @retval none + */ +__weak void HAL_RCC_LSECSSCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RCC_LSECSSCallback should be implemented in the user file + */ +} + +/** + * @brief Get and clear reset flags + * @note Once reset flags are retrieved, this API is clearing them in order + * to isolate next reset reason. + * @retval can be a combination of @ref RCC_Reset_Flag + */ +uint32_t HAL_RCC_GetResetSource(void) +{ + uint32_t reset; + + /* Get all reset flags */ + reset = RCC->CSR & RCC_RESET_FLAG_ALL; + + /* Clear Reset flags */ + RCC->CSR |= RCC_CSR_RMVF; + + return reset; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c new file mode 100644 index 0000000..a8b6d37 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c @@ -0,0 +1,1678 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rcc_ex.c + * @author MCD Application Team + * @brief Extended RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities RCC extended peripheral: + * + Extended Peripheral Control functions + * + Extended Clock management functions + * + Extended Clock Recovery System Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup RCCEx RCCEx + * @brief RCC Extended HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Constants RCCEx Private Constants + * @{ + */ +#define PLL_TIMEOUT_VALUE 100U /* 100 ms (minimum Tick + 1) */ + +#define LSCO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define LSCO_GPIO_PORT GPIOA +#define LSCO_PIN GPIO_PIN_2 +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions + * @{ + */ + +/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + [..] + (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to + select the RTC clock source; in this case the Backup domain will be reset in + order to modify the RTC Clock source, as consequence RTC registers (including + the backup registers) and RCC_BDCR register are set to their reset values. + +@endverbatim + * @{ + */ +/** + * @brief Initialize the RCC extended peripherals clocks according to the specified + * parameters in the @ref RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit pointer to a @ref RCC_PeriphCLKInitTypeDef structure that + * contains a field PeriphClockSelection which can be a combination of the following values: + * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock + * @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C1 I2C1 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock (2) + * @arg @ref RCC_PERIPHCLK_I2S1 I2S1 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_USART1 USART1 peripheral clock + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_LPTIM1 LPTIM1 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_LPTIM2 LPTIM2 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_LPUART1 LPUART1 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_LPUART2 LPUART2 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_RNG RNG peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock (1)(2) + * @arg @ref RCC_PERIPHCLK_TIM15 TIM15 peripheral clock (1)(2) + * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock (2) + * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock (2) + * @arg @ref RCC_PERIPHCLK_FDCAN FDCAN peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (1) + * + * @note (1) Peripherals are not available on all devices + * @note (2) Peripherals clock selection is not available on all devices + * @note Care must be taken when @ref HAL_RCCEx_PeriphCLKConfig() is used to select + * the RTC clock source: in this case the access to Backup domain is enabled. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tmpregister; + uint32_t tickstart; + HAL_StatusTypeDef ret = HAL_OK; /* Intermediate status */ + HAL_StatusTypeDef status = HAL_OK; /* Final status */ + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + + /*-------------------------- RTC clock source configuration ----------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) + { + FlagStatus pwrclkchanged = RESET; + + /* Check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + /* Enable Power Clock */ + if (__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR1, PWR_CR1_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while ((PWR->CR1 & PWR_CR1_DBP) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + ret = HAL_TIMEOUT; + break; + } + } + + if (ret == HAL_OK) + { + /* Reset the Backup domain only if the RTC Clock source selection is modified from default */ + tmpregister = READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL); + + /* Reset the Backup domain only if the RTC Clock source selection is modified */ + if ((tmpregister != RCC_RTCCLKSOURCE_NONE) && (tmpregister != PeriphClkInit->RTCClockSelection)) + { + /* Store the content of BDCR register before the reset of Backup Domain */ + tmpregister = READ_BIT(RCC->BDCR, ~(RCC_BDCR_RTCSEL)); + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + /* Restore the Content of BDCR register */ + RCC->BDCR = tmpregister; + } + + /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ + if (HAL_IS_BIT_SET(tmpregister, RCC_BDCR_LSEON)) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + ret = HAL_TIMEOUT; + break; + } + } + } + + if (ret == HAL_OK) + { + /* Apply new RTC clock source selection */ + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + else + { + /* set overall return value */ + status = ret; + } + + /* Restore clock configuration if changed */ + if (pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + + /*-------------------------- USART1 clock source configuration -------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) + { + /* Check the parameters */ + assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection)); + + /* Configure the USART1 clock source */ + __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection); + } + +#if defined(RCC_CCIPR_USART2SEL) + /*-------------------------- USART2 clock source configuration -------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) + { + /* Check the parameters */ + assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection)); + + /* Configure the USART2 clock source */ + __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection); + } +#endif /* RCC_CCIPR_USART2SEL */ + +#if defined(RCC_CCIPR_USART3SEL) + /*-------------------------- USART3 clock source configuration -------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) + { + /* Check the parameters */ + assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection)); + + /* Configure the USART3 clock source */ + __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection); + } +#endif /* RCC_CCIPR_USART3SEL */ + +#if defined(LPUART1) + /*-------------------------- LPUART1 clock source configuration ------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) + { + /* Check the parameters */ + assert_param(IS_RCC_LPUART1CLKSOURCE(PeriphClkInit->Lpuart1ClockSelection)); + + /* Configure the LPUART1 clock source */ + __HAL_RCC_LPUART1_CONFIG(PeriphClkInit->Lpuart1ClockSelection); + } +#endif /* LPUART1 */ + +#if defined(LPUART2) + /*-------------------------- LPUART2 clock source configuration ------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPUART2) == RCC_PERIPHCLK_LPUART2) + { + /* Check the parameters */ + assert_param(IS_RCC_LPUART2CLKSOURCE(PeriphClkInit->Lpuart2ClockSelection)); + + /* Configure the LPUART clock source */ + __HAL_RCC_LPUART2_CONFIG(PeriphClkInit->Lpuart2ClockSelection); + } +#endif /* LPUART2 */ + +#if defined(RCC_CCIPR_LPTIM1SEL) + /*-------------------------- LPTIM1 clock source configuration -------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == (RCC_PERIPHCLK_LPTIM1)) + { + assert_param(IS_RCC_LPTIM1CLKSOURCE(PeriphClkInit->Lptim1ClockSelection)); + __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); + } +#endif /* RCC_CCIPR_LPTIM1SEL */ + +#if defined(RCC_CCIPR_LPTIM2SEL) + /*-------------------------- LPTIM2 clock source configuration -------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM2) == (RCC_PERIPHCLK_LPTIM2)) + { + assert_param(IS_RCC_LPTIM2CLKSOURCE(PeriphClkInit->Lptim2ClockSelection)); + __HAL_RCC_LPTIM2_CONFIG(PeriphClkInit->Lptim2ClockSelection); + } +#endif /* RCC_CCIPR_LPTIM2SEL */ + + /*-------------------------- I2C1 clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection)); + + /* Configure the I2C1 clock source */ + __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection); + } + +#if defined(RCC_CCIPR_I2C2SEL) + /*-------------------------- I2C2 clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C2CLKSOURCE(PeriphClkInit->I2c2ClockSelection)); + + /* Configure the I2C2 clock source */ + __HAL_RCC_I2C2_CONFIG(PeriphClkInit->I2c2ClockSelection); + } +#endif /* (RCC_CCIPR_I2C2SEL */ + +#if defined(RNG) + /*-------------------------- RNG clock source configuration ----------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RNG) == (RCC_PERIPHCLK_RNG)) + { + assert_param(IS_RCC_RNGCLKSOURCE(PeriphClkInit->RngClockSelection)); + __HAL_RCC_RNG_CONFIG(PeriphClkInit->RngClockSelection); + + if (PeriphClkInit->RngClockSelection == RCC_RNGCLKSOURCE_PLL) + { + /* Enable PLLQCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLQCLK); + } + } +#endif /* RNG */ + /*-------------------------- ADC clock source configuration ----------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) + { + /* Check the parameters */ + assert_param(IS_RCC_ADCCLKSOURCE(PeriphClkInit->AdcClockSelection)); + + /* Configure the ADC interface clock source */ + __HAL_RCC_ADC_CONFIG(PeriphClkInit->AdcClockSelection); + + if (PeriphClkInit->AdcClockSelection == RCC_ADCCLKSOURCE_PLLADC) + { + /* Enable PLLPCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLPCLK); + } + } + +#if defined(CEC) + /*-------------------------- CEC clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) + { + /* Check the parameters */ + assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection)); + + /* Configure the CEC clock source */ + __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection); + } +#endif /* CEC */ + +#if defined(RCC_CCIPR_TIM1SEL) + /*-------------------------- TIM1 clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) + { + /* Check the parameters */ + assert_param(IS_RCC_TIM1CLKSOURCE(PeriphClkInit->Tim1ClockSelection)); + + /* Configure the TIM1 clock source */ + __HAL_RCC_TIM1_CONFIG(PeriphClkInit->Tim1ClockSelection); + + if (PeriphClkInit->Tim1ClockSelection == RCC_TIM1CLKSOURCE_PLL) + { + /* Enable PLLQCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLQCLK); + } + } +#endif /* RCC_CCIPR_TIM1SEL */ + +#if defined(RCC_CCIPR_TIM15SEL) + /*-------------------------- TIM15 clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15) + { + /* Check the parameters */ + assert_param(IS_RCC_TIM15CLKSOURCE(PeriphClkInit->Tim15ClockSelection)); + + /* Configure the TIM15 clock source */ + __HAL_RCC_TIM15_CONFIG(PeriphClkInit->Tim15ClockSelection); + + if (PeriphClkInit->Tim15ClockSelection == RCC_TIM15CLKSOURCE_PLL) + { + /* Enable PLLQCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLQCLK); + } + } +#endif /* RCC_CCIPR_TIM15SEL */ + + /*-------------------------- I2S1 clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) + { + /* Check the parameters */ + assert_param(IS_RCC_I2S1CLKSOURCE(PeriphClkInit->I2s1ClockSelection)); + + /* Configure the I2S1 clock source */ + __HAL_RCC_I2S1_CONFIG(PeriphClkInit->I2s1ClockSelection); + + if (PeriphClkInit->I2s1ClockSelection == RCC_I2S1CLKSOURCE_PLL) + { + /* Enable PLLPCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLPCLK); + } + } + +#if defined(RCC_CCIPR2_I2S2SEL) + /*-------------------------- I2S2 clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) + { + /* Check the parameters */ + assert_param(IS_RCC_I2S2CLKSOURCE(PeriphClkInit->I2s2ClockSelection)); + + /* Configure the I2S2 clock source */ + __HAL_RCC_I2S2_CONFIG(PeriphClkInit->I2s2ClockSelection); + + if (PeriphClkInit->I2s2ClockSelection == RCC_I2S2CLKSOURCE_PLL) + { + /* Enable PLLPCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLPCLK); + } + } +#endif /* RCC_CCIPR2_I2S2SEL */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) + /*-------------------------- USB clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) + { + /* Check the parameters */ + assert_param(IS_RCC_USBCLKSOURCE(PeriphClkInit->UsbClockSelection)); + + /* Configure the USB clock source */ + __HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection); + + if (PeriphClkInit->UsbClockSelection == RCC_USBCLKSOURCE_PLL) + { + /* Enable PLLQCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLQCLK); + } + } +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(FDCAN1) || defined(FDCAN2) + /*-------------------------- FDCAN clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FDCAN) == RCC_PERIPHCLK_FDCAN) + { + /* Check the parameters */ + assert_param(IS_RCC_FDCANCLKSOURCE(PeriphClkInit->FdcanClockSelection)); + + /* Configure the FDCAN clock source */ + __HAL_RCC_FDCAN_CONFIG(PeriphClkInit->FdcanClockSelection); + + if (PeriphClkInit->FdcanClockSelection == RCC_FDCANCLKSOURCE_PLL) + { + /* Enable PLLQCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLLQCLK); + } + } +#endif /* FDCAN1 || FDCAN2 */ + + return status; +} + +/** + * @brief Get the RCC_ClkInitStruct according to the internal RCC configuration registers. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * returns the configuration information for the Extended Peripherals + * clocks: I2C1, I2S1, USART1, RTC, ADC, + * LPTIM1 (1), LPTIM2 (1), TIM1 (2), TIM15 (1)(2), USART2 (2), LPUART1 (1), CEC (1) and RNG (1) + * @note (1) Peripheral is not available on all devices + * @note (2) Peripheral clock selection is not available on all devices + * @retval None + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + /* Set all possible values for the extended clock type parameter------------*/ + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2S1 | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_RTC ; + +#if defined(RCC_CCIPR_LPTIM1SEL) && defined(RCC_CCIPR_LPTIM2SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_LPTIM1; +#endif /* RCC_CCIPR_LPTIM1SEL && RCC_CCIPR_LPTIM2SEL */ +#if defined(RCC_CCIPR_RNGSEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_RNG; +#endif /* RCC_CCIPR_RNGSEL */ +#if defined(RCC_CCIPR_LPUART1SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_LPUART1; +#endif /* RCC_CCIPR_LPUART1SEL */ +#if defined(RCC_CCIPR_LPUART2SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_LPUART2; +#endif /* RCC_CCIPR_LPUART2SEL */ +#if defined(RCC_CCIPR_CECSEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_CEC; +#endif /* RCC_CCIPR_CECSEL */ +#if defined(RCC_CCIPR_TIM1SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM1; +#endif /* RCC_CCIPR_TIM1SEL */ +#if defined(RCC_CCIPR_TIM15SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM15; +#endif /* RCC_CCIPR_TIM15SEL */ +#if defined(RCC_CCIPR_USART2SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USART2; +#endif /* RCC_CCIPR_USART2SEL */ +#if defined(RCC_CCIPR_USART3SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USART3; +#endif /* RCC_CCIPR_USART3SEL */ +#if defined(RCC_CCIPR_I2C2SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2C2; +#endif /* RCC_CCIPR_I2C2SEL */ +#if defined(RCC_CCIPR2_I2S2SEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S2; +#endif /* RCC_CCIPR2_I2S2SEL */ +#if defined(RCC_CCIPR2_USBSEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USB; +#endif /* RCC_CCIPR2_USBSEL */ +#if defined(RCC_CCIPR2_FDCANSEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_FDCAN; +#endif /* RCC_CCIPR_FDCANSEL */ + /* Get the USART1 clock source ---------------------------------------------*/ + PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE(); +#if defined(RCC_CCIPR_USART2SEL) + /* Get the USART2 clock source ---------------------------------------------*/ + PeriphClkInit->Usart2ClockSelection = __HAL_RCC_GET_USART2_SOURCE(); +#endif /* RCC_CCIPR_USART2SEL */ +#if defined(RCC_CCIPR_USART3SEL) + /* Get the USART3 clock source ---------------------------------------------*/ + PeriphClkInit->Usart3ClockSelection = __HAL_RCC_GET_USART3_SOURCE(); +#endif /* RCC_CCIPR_USART3SEL */ +#if defined(RCC_CCIPR_LPUART1SEL) + /* Get the LPUART1 clock source --------------------------------------------*/ + PeriphClkInit->Lpuart1ClockSelection = __HAL_RCC_GET_LPUART1_SOURCE(); +#endif /* RCC_CCIPR_LPUART1SEL */ +#if defined(RCC_CCIPR_LPUART2SEL) + /* Get the LPUART2 clock source --------------------------------------------*/ + PeriphClkInit->Lpuart2ClockSelection = __HAL_RCC_GET_LPUART2_SOURCE(); +#endif /* RCC_CCIPR_LPUART2SEL */ + /* Get the I2C1 clock source -----------------------------------------------*/ + PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE(); +#if defined(RCC_CCIPR_I2C2SEL) + /* Get the I2C2 clock source -----------------------------------------------*/ + PeriphClkInit->I2c2ClockSelection = __HAL_RCC_GET_I2C2_SOURCE(); +#endif /* RCC_CCIPR_I2C2SEL */ +#if defined(RCC_CCIPR_LPTIM1SEL) + /* Get the LPTIM1 clock source ---------------------------------------------*/ + PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE(); +#endif /* RCC_CCIPR_LPTIM1SEL */ +#if defined(RCC_CCIPR_LPTIM2SEL) + /* Get the LPTIM2 clock source ---------------------------------------------*/ + PeriphClkInit->Lptim2ClockSelection = __HAL_RCC_GET_LPTIM2_SOURCE(); +#endif /* RCC_CCIPR_LPTIM2SEL */ +#if defined(RCC_CCIPR_TIM1SEL) + /* Get the TIM1 clock source ---------------------------------------------*/ + PeriphClkInit->Tim1ClockSelection = __HAL_RCC_GET_TIM1_SOURCE(); +#endif /* RCC_CCIPR_TIM1SEL */ +#if defined(RCC_CCIPR_TIM15SEL) + /* Get the TIM15 clock source ---------------------------------------------*/ + PeriphClkInit->Tim15ClockSelection = __HAL_RCC_GET_TIM15_SOURCE(); +#endif /* RCC_CCIPR_TIM15SEL */ + /* Get the RTC clock source ------------------------------------------------*/ + PeriphClkInit->RTCClockSelection = __HAL_RCC_GET_RTC_SOURCE(); +#if defined(RCC_CCIPR_RNGSEL) + /* Get the RNG clock source ------------------------------------------------*/ + PeriphClkInit->RngClockSelection = __HAL_RCC_GET_RNG_SOURCE(); +#endif /* RCC_CCIPR_RNGSEL */ + /* Get the ADC clock source -----------------------------------------------*/ + PeriphClkInit->AdcClockSelection = __HAL_RCC_GET_ADC_SOURCE(); +#if defined(RCC_CCIPR_CECSEL) + /* Get the CEC clock source -----------------------------------------------*/ + PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE(); +#endif /* RCC_CCIPR_CECSEL */ +#if defined(RCC_CCIPR2_USBSEL) + /* Get the USB clock source -----------------------------------------------*/ + PeriphClkInit->UsbClockSelection = __HAL_RCC_GET_USB_SOURCE(); +#endif /* RCC_CCIPR2_USBSEL */ +#if defined(RCC_CCIPR2_FDCANSEL) + /* Get the FDCAN clock source -----------------------------------------------*/ + PeriphClkInit->FdcanClockSelection = __HAL_RCC_GET_FDCAN_SOURCE(); +#endif /* RCC_CCIPR2_FDCANSEL */ + /* Get the I2S1 clock source -----------------------------------------------*/ + PeriphClkInit->I2s1ClockSelection = __HAL_RCC_GET_I2S1_SOURCE(); +#if defined(RCC_CCIPR2_I2S2SEL) + /* Get the I2S2 clock source -----------------------------------------------*/ + PeriphClkInit->I2s2ClockSelection = __HAL_RCC_GET_I2S2_SOURCE(); +#endif /* RCC_CCIPR2_I2S2SEL */ +} + +/** + * @brief Return the peripheral clock frequency for peripherals with clock source from PLL + * @note Return 0 if peripheral clock identifier not managed by this API + * @param PeriphClk Peripheral clock identifier + * This parameter can be one of the following values: + * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock + * @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C1 I2C1 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_I2S1 I2S1 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_USART1 USART1 peripheral clock + * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock (1)(2) + * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_RNG RNG peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_TIM15 TIM15 peripheral clock (1)(2) + * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock (1)(2) + * @arg @ref RCC_PERIPHCLK_LPTIM1 LPTIM1 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_LPTIM2 LPTIM2 peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_LPUART1 LPUART1 peripheral clock(1) + * @arg @ref RCC_PERIPHCLK_LPUART2 LPUART2 peripheral clock(1) + * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_FDCAN FDCAN peripheral clock (1) + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (1) + * @note (1) Peripheral not available on all devices + * @note (2) Peripheral Clock configuration not available on all devices + * @retval Frequency in Hz + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) +{ + uint32_t frequency = 0U; + uint32_t srcclk; + uint32_t pllvco; + uint32_t plln; +#if defined(RCC_CCIPR_RNGSEL) + uint32_t rngclk; + uint32_t rngdiv; +#endif /* RCC_CCIPR_RNGSEL */ + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClk)); + + if (PeriphClk == RCC_PERIPHCLK_RTC) + { + /* Get the current RTC source */ + srcclk = __HAL_RCC_GET_RTC_SOURCE(); + + /* Check if LSE is ready and if RTC clock selection is LSE */ + if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_RTCCLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Check if LSI is ready and if RTC clock selection is LSI */ + else if ((HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)) && (srcclk == RCC_RTCCLKSOURCE_LSI)) + { + frequency = LSI_VALUE; + } + /* Check if HSE is ready and if RTC clock selection is HSI_DIV32*/ + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (srcclk == RCC_RTCCLKSOURCE_HSE_DIV32)) + { + frequency = HSE_VALUE / 32U; + } + /* Clock not enabled for RTC*/ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + } + else + { + /* Other external peripheral clock source than RTC */ + + /* Compute PLL clock input */ + if (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI) /* HSI ? */ + { + pllvco = HSI_VALUE; + } + else if (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE) /* HSE ? */ + { + pllvco = HSE_VALUE; + } + else /* No source */ + { + pllvco = 0U; + } + + /* f(PLL Source) / PLLM */ + pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); + + switch (PeriphClk) + { +#if defined(RCC_CCIPR_RNGSEL) + case RCC_PERIPHCLK_RNG: + + srcclk = READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGSEL); + if (srcclk == RCC_RNGCLKSOURCE_HSI_DIV8) /* HSI_DIV8 ? */ + { + rngclk = HSI_VALUE / 8U; + } + else if (srcclk == RCC_RNGCLKSOURCE_PLL) /* PLL ? */ + { + /* f(PLLQ) = f(VCO input) * PLLN / PLLQ */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + rngclk = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U); + } + else if (srcclk == RCC_RNGCLKSOURCE_SYSCLK) /* SYSCLK ? */ + { + rngclk = HAL_RCC_GetSysClockFreq(); + } + else /* No clock source */ + { + rngclk = 0U; + } + + rngdiv = (1UL << ((READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGDIV)) >> RCC_CCIPR_RNGDIV_Pos)); + frequency = (rngclk / rngdiv); + + break; +#endif /* RCC_CCIPR_RNGSEL */ + case RCC_PERIPHCLK_USART1: + /* Get the current USART1 source */ + srcclk = __HAL_RCC_GET_USART1_SOURCE(); + + if (srcclk == RCC_USART1CLKSOURCE_PCLK1) /* PCLK1 ? */ + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_USART1CLKSOURCE_SYSCLK) /* SYSCLK ? */ + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_USART1CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_USART1CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for USART1 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#if defined(RCC_CCIPR_USART2SEL) + case RCC_PERIPHCLK_USART2: + /* Get the current USART2 source */ + srcclk = __HAL_RCC_GET_USART2_SOURCE(); + + if (srcclk == RCC_USART2CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_USART2CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_USART2CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_USART2CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for USART2 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_USART2SEL */ + +#if defined(RCC_CCIPR_USART3SEL) + case RCC_PERIPHCLK_USART3: + /* Get the current USART3 source */ + srcclk = __HAL_RCC_GET_USART3_SOURCE(); + + if (srcclk == RCC_USART3CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_USART3CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_USART3CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_USART3CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for USART3 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_USART3SEL */ + +#if defined(RCC_CCIPR_CECSEL) + case RCC_PERIPHCLK_CEC: + /* Get the current CEC source */ + srcclk = __HAL_RCC_GET_CEC_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_CECCLKSOURCE_HSI_DIV488)) + { + frequency = (HSI_VALUE / 488U); + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_CECCLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for CEC */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_CECSEL */ + +#if defined(RCC_CCIPR_LPUART1SEL) + case RCC_PERIPHCLK_LPUART1: + /* Get the current LPUART1 source */ + srcclk = __HAL_RCC_GET_LPUART1_SOURCE(); + + if (srcclk == RCC_LPUART1CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_LPUART1CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_LPUART1CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_LPUART1CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for LPUART1 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_LPUART1SEL */ + +#if defined(RCC_CCIPR_LPUART2SEL) + case RCC_PERIPHCLK_LPUART2: + /* Get the current LPUART2 source */ + srcclk = __HAL_RCC_GET_LPUART2_SOURCE(); + + if (srcclk == RCC_LPUART2CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_LPUART2CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_LPUART2CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_LPUART2CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for LPUART2 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_LPUART2SEL */ + + case RCC_PERIPHCLK_ADC: + + srcclk = __HAL_RCC_GET_ADC_SOURCE(); + + if (srcclk == RCC_ADCCLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if (srcclk == RCC_ADCCLKSOURCE_HSI) + { + frequency = HSI_VALUE; + } + else if (srcclk == RCC_ADCCLKSOURCE_PLLADC) + { + if (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLLPCLK) != 0U) + { + /* f(PLLP) = f(VCO input) * PLLN / PLLP */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + frequency = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1U); + } + } + /* Clock not enabled for ADC */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; + + case RCC_PERIPHCLK_I2C1: + /* Get the current I2C1 source */ + srcclk = __HAL_RCC_GET_I2C1_SOURCE(); + + if (srcclk == RCC_I2C1CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_I2C1CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_I2C1CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + /* Clock not enabled for I2C1 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; + +#if defined(RCC_CCIPR_I2C2SEL) + case RCC_PERIPHCLK_I2C2: + /* Get the current I2C2 source */ + srcclk = __HAL_RCC_GET_I2C2_SOURCE(); + + if (srcclk == RCC_I2C2CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_I2C2CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_I2C2CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + /* Clock not enabled for I2C2 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_I2C2SEL */ + + case RCC_PERIPHCLK_I2S1: + /* Get the current I2S1 source */ + srcclk = __HAL_RCC_GET_I2S1_SOURCE(); + + if (srcclk == RCC_I2S1CLKSOURCE_PLL) + { + if (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLLPCLK) != 0U) + { + /* f(PLLP) = f(VCO input) * PLLN / PLLP */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + frequency = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1U); + } + } + else if (srcclk == RCC_I2S1CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_I2S1CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if (srcclk == RCC_I2S1CLKSOURCE_EXT) + { + /* External clock used.*/ + frequency = EXTERNAL_I2S1_CLOCK_VALUE; + } + /* Clock not enabled for I2S1 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; + +#if defined(RCC_CCIPR2_I2S2SEL) + case RCC_PERIPHCLK_I2S2: + /* Get the current I2S2 source */ + srcclk = __HAL_RCC_GET_I2S2_SOURCE(); + + if (srcclk == RCC_I2S2CLKSOURCE_PLL) + { + if (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLLPCLK) != 0U) + { + /* f(PLLP) = f(VCO input) * PLLN / PLLP */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + frequency = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1U); + } + } + else if (srcclk == RCC_I2S2CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_I2S2CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if (srcclk == RCC_I2S2CLKSOURCE_EXT) + { + /* External clock used.*/ + frequency = EXTERNAL_I2S2_CLOCK_VALUE; + } + /* Clock not enabled for I2S2 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR2_I2S2SEL */ + +#if defined(RCC_CCIPR_LPTIM1SEL) + case RCC_PERIPHCLK_LPTIM1: + /* Get the current LPTIM1 source */ + srcclk = __HAL_RCC_GET_LPTIM1_SOURCE(); + + if (srcclk == RCC_LPTIM1CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if ((HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)) && (srcclk == RCC_LPTIM1CLKSOURCE_LSI)) + { + frequency = LSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_LPTIM1CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_LPTIM1CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for LPTIM1 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_LPTIM1SEL */ + +#if defined(RCC_CCIPR_LPTIM2SEL) + case RCC_PERIPHCLK_LPTIM2: + /* Get the current LPTIM2 source */ + srcclk = __HAL_RCC_GET_LPTIM2_SOURCE(); + + if (srcclk == RCC_LPTIM2CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if ((HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)) && (srcclk == RCC_LPTIM2CLKSOURCE_LSI)) + { + frequency = LSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_LPTIM2CLKSOURCE_HSI)) + { + frequency = HSI_VALUE; + } + else if ((HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) && (srcclk == RCC_LPTIM2CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for LPTIM2 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_LPTIM2SEL */ + +#if defined(RCC_CCIPR_TIM1SEL) + case RCC_PERIPHCLK_TIM1: + + srcclk = READ_BIT(RCC->CCIPR, RCC_CCIPR_TIM1SEL); + + if (srcclk == RCC_TIM1CLKSOURCE_PLL) /* PLL ? */ + { + if (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLLQCLK) != 0U) + { + /* f(PLLQ) = f(VCO input) * PLLN / PLLQ */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + frequency = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U); + } + } + else if (srcclk == RCC_TIM1CLKSOURCE_PCLK1) /* PCLK1 ? */ + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else /* No clock source */ + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_TIM1SEL */ + +#if defined(RCC_CCIPR_TIM15SEL) + case RCC_PERIPHCLK_TIM15: + + srcclk = READ_BIT(RCC->CCIPR, RCC_CCIPR_TIM15SEL); + + if (srcclk == RCC_TIM15CLKSOURCE_PLL) /* PLL ? */ + { + if (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLLQCLK) != 0U) + { + /* f(PLLQ) = f(VCO input) * PLLN / PLLQ */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + frequency = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U); + } + } + else if (srcclk == RCC_TIM15CLKSOURCE_PCLK1) /* PCLK1 ? */ + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else /* No clock source */ + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR_TIM15SEL */ + +#if defined(RCC_CCIPR2_USBSEL) + case RCC_PERIPHCLK_USB: + + srcclk = READ_BIT(RCC->CCIPR2, RCC_CCIPR2_USBSEL); + + if (srcclk == RCC_USBCLKSOURCE_PLL) /* PLL ? */ + { + if (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLLQCLK) != 0U) + { + /* f(PLLQ) = f(VCO input) * PLLN / PLLQ */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + frequency = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U); + } + } +#if defined(RCC_HSI48_SUPPORT) + else if (srcclk == RCC_USBCLKSOURCE_HSI48) /* HSI48 ? */ + { + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSI48RDY)) && (srcclk == RCC_USBCLKSOURCE_HSI48)) + { + frequency = HSI48_VALUE; + } + } +#endif /* RCC_HSI48_SUPPORT */ + else if (srcclk == RCC_USBCLKSOURCE_HSE) + { + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (srcclk == RCC_USBCLKSOURCE_HSE)) + { + frequency = HSE_VALUE; + } + } + else /* No clock source */ + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR2_USBSEL */ + +#if defined(RCC_CCIPR2_FDCANSEL) + case RCC_PERIPHCLK_FDCAN: + + srcclk = READ_BIT(RCC->CCIPR2, RCC_CCIPR2_FDCANSEL); + + if (srcclk == RCC_FDCANCLKSOURCE_PLL) /* PLL ? */ + { + if (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLLQCLK) != 0U) + { + /* f(PLLQ) = f(VCO input) * PLLN / PLLQ */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + frequency = (pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U); + } + } + else if (srcclk == RCC_FDCANCLKSOURCE_PCLK1) /* PCLK1 ? */ + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (srcclk == RCC_FDCANCLKSOURCE_HSE)) + { + frequency = HSE_VALUE; + } + else /* No clock source */ + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif /* RCC_CCIPR2_FDCANSEL */ + + default: + break; + } + } + + return (frequency); +} + +/** + * @} + */ + +/** @defgroup RCCEx_Exported_Functions_Group2 Extended Clock management functions + * @brief Extended Clock management functions + * +@verbatim + =============================================================================== + ##### Extended clock management functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the + activation or deactivation of LSE CSS, Low speed clock output and + clock after wake-up from STOP mode. +@endverbatim + * @{ + */ + +/** + * @brief Select the Low Speed clock source to output on LSCO pin (PA2). + * @param LSCOSource specifies the Low Speed clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_LSCOSOURCE_LSI LSI clock selected as LSCO source + * @arg @ref RCC_LSCOSOURCE_LSE LSE clock selected as LSCO source + * @retval None + */ +void HAL_RCCEx_EnableLSCO(uint32_t LSCOSource) +{ + GPIO_InitTypeDef GPIO_InitStruct; + FlagStatus pwrclkchanged = RESET; + FlagStatus backupchanged = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_LSCOSOURCE(LSCOSource)); + + /* LSCO Pin Clock Enable */ + LSCO_CLK_ENABLE(); + + /* Configure the LSCO pin in analog mode */ + GPIO_InitStruct.Pin = LSCO_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(LSCO_GPIO_PORT, &GPIO_InitStruct); + + /* Update LSCOSEL clock source in Backup Domain control register */ + if (__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + if (HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + { + HAL_PWR_EnableBkUpAccess(); + backupchanged = SET; + } + + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSCOSEL | RCC_BDCR_LSCOEN, LSCOSource | RCC_BDCR_LSCOEN); + + if (backupchanged == SET) + { + HAL_PWR_DisableBkUpAccess(); + } + if (pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } +} + +/** + * @brief Disable the Low Speed clock output. + * @retval None + */ +void HAL_RCCEx_DisableLSCO(void) +{ + FlagStatus pwrclkchanged = RESET; + FlagStatus backupchanged = RESET; + + /* Update LSCOEN bit in Backup Domain control register */ + if (__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + if (HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + { + /* Enable access to the backup domain */ + HAL_PWR_EnableBkUpAccess(); + backupchanged = SET; + } + + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSCOEN); + + /* Restore previous configuration */ + if (backupchanged == SET) + { + /* Disable access to the backup domain */ + HAL_PWR_DisableBkUpAccess(); + } + if (pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } +} + +/** + * @} + */ + +#if defined(CRS) + +/** @defgroup RCCEx_Exported_Functions_Group3 Extended Clock Recovery System Control functions + * @brief Extended Clock Recovery System Control functions + * +@verbatim + =============================================================================== + ##### Extended Clock Recovery System Control functions ##### + =============================================================================== + [..] + For devices with Clock Recovery System feature (CRS), RCC Extension HAL driver can be used as follows: + + (#) In System clock config, HSI48 needs to be enabled + + (#) Enable CRS clock in IP MSP init which will use CRS functions + + (#) Call CRS functions as follows: + (##) Prepare synchronization configuration necessary for HSI48 calibration + (+++) Default values can be set for frequency Error Measurement (reload and error limit) + and also HSI48 oscillator smooth trimming. + (+++) Macro __HAL_RCC_CRS_RELOADVALUE_CALCULATE can be also used to calculate + directly reload value with target and synchronization frequencies values + (##) Call function HAL_RCCEx_CRSConfig which + (+++) Resets CRS registers to their default values. + (+++) Configures CRS registers with synchronization configuration + (+++) Enables automatic calibration and frequency error counter feature + Note: When using USB LPM (Link Power Management) and the device is in Sleep mode, the + periodic USB SOF will not be generated by the host. No SYNC signal will therefore be + provided to the CRS to calibrate the HSI48 on the run. To guarantee the required clock + precision after waking up from Sleep mode, the LSE or reference clock on the GPIOs + should be used as SYNC signal. + + (##) A polling function is provided to wait for complete synchronization + (+++) Call function HAL_RCCEx_CRSWaitSynchronization() + (+++) According to CRS status, user can decide to adjust again the calibration or continue + application if synchronization is OK + + (#) User can retrieve information related to synchronization in calling function + HAL_RCCEx_CRSGetSynchronizationInfo() + + (#) Regarding synchronization status and synchronization information, user can try a new calibration + in changing synchronization configuration and call again HAL_RCCEx_CRSConfig. + Note: When the SYNC event is detected during the downcounting phase (before reaching the zero value), + it means that the actual frequency is lower than the target (and so, that the TRIM value should be + incremented), while when it is detected during the upcounting phase it means that the actual frequency + is higher (and that the TRIM value should be decremented). + + (#) In interrupt mode, user can resort to the available macros (__HAL_RCC_CRS_XXX_IT). Interrupts will go + through CRS Handler (CRS_IRQn/CRS_IRQHandler) + (++) Call function HAL_RCCEx_CRSConfig() + (++) Enable CRS_IRQn (thanks to NVIC functions) + (++) Enable CRS interrupt (__HAL_RCC_CRS_ENABLE_IT) + (++) Implement CRS status management in the following user callbacks called from + HAL_RCCEx_CRS_IRQHandler(): + (+++) HAL_RCCEx_CRS_SyncOkCallback() + (+++) HAL_RCCEx_CRS_SyncWarnCallback() + (+++) HAL_RCCEx_CRS_ExpectedSyncCallback() + (+++) HAL_RCCEx_CRS_ErrorCallback() + + (#) To force a SYNC EVENT, user can use the function HAL_RCCEx_CRSSoftwareSynchronizationGenerate(). + This function can be called before calling HAL_RCCEx_CRSConfig (for instance in Systick handler) + +@endverbatim + * @{ + */ + +/** + * @brief Start automatic synchronization for polling mode + * @param pInit Pointer on RCC_CRSInitTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit) +{ + uint32_t value; /* no init needed */ + + /* Check the parameters */ + assert_param(IS_RCC_CRS_SYNC_DIV(pInit->Prescaler)); + assert_param(IS_RCC_CRS_SYNC_SOURCE(pInit->Source)); + assert_param(IS_RCC_CRS_SYNC_POLARITY(pInit->Polarity)); + assert_param(IS_RCC_CRS_RELOADVALUE(pInit->ReloadValue)); + assert_param(IS_RCC_CRS_ERRORLIMIT(pInit->ErrorLimitValue)); + assert_param(IS_RCC_CRS_HSI48CALIBRATION(pInit->HSI48CalibrationValue)); + + /* CONFIGURATION */ + + /* Before configuration, reset CRS registers to their default values*/ + __HAL_RCC_CRS_FORCE_RESET(); + __HAL_RCC_CRS_RELEASE_RESET(); + + /* Set the SYNCDIV[2:0] bits according to Prescaler value */ + /* Set the SYNCSRC[1:0] bits according to Source value */ + /* Set the SYNCSPOL bit according to Polarity value */ + value = (pInit->Prescaler | pInit->Source | pInit->Polarity); + /* Set the RELOAD[15:0] bits according to ReloadValue value */ + value |= pInit->ReloadValue; + /* Set the FELIM[7:0] bits according to ErrorLimitValue value */ + value |= (pInit->ErrorLimitValue << CRS_CFGR_FELIM_Pos); + WRITE_REG(CRS->CFGR, value); + + /* Adjust HSI48 oscillator smooth trimming */ + /* Set the TRIM[6:0] bits according to RCC_CRS_HSI48CalibrationValue value */ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, (pInit->HSI48CalibrationValue << CRS_CR_TRIM_Pos)); + + /* START AUTOMATIC SYNCHRONIZATION*/ + + /* Enable Automatic trimming & Frequency error counter */ + SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN | CRS_CR_CEN); +} + +/** + * @brief Generate the software synchronization event + * @retval None + */ +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void) +{ + SET_BIT(CRS->CR, CRS_CR_SWSYNC); +} + +/** + * @brief Return synchronization info + * @param pSynchroInfo Pointer on RCC_CRSSynchroInfoTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo) +{ + /* Check the parameter */ + assert_param(pSynchroInfo != (void *)NULL); + + /* Get the reload value */ + pSynchroInfo->ReloadValue = (READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD)); + + /* Get HSI48 oscillator smooth trimming */ + pSynchroInfo->HSI48CalibrationValue = (READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos); + + /* Get Frequency error capture */ + pSynchroInfo->FreqErrorCapture = (READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos); + + /* Get Frequency error direction */ + pSynchroInfo->FreqErrorDirection = (READ_BIT(CRS->ISR, CRS_ISR_FEDIR)); +} + +/** + * @brief Wait for CRS Synchronization status. + * @param Timeout Duration of the timeout + * @note Timeout is based on the maximum time to receive a SYNC event based on synchronization + * frequency. + * @note If Timeout set to HAL_MAX_DELAY, HAL_TIMEOUT will be never returned. + * @retval Combination of Synchronization status + * This parameter can be a combination of the following values: + * @arg @ref RCC_CRS_TIMEOUT + * @arg @ref RCC_CRS_SYNCOK + * @arg @ref RCC_CRS_SYNCWARN + * @arg @ref RCC_CRS_SYNCERR + * @arg @ref RCC_CRS_SYNCMISS + * @arg @ref RCC_CRS_TRIMOVF + */ +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout) +{ + uint32_t crsstatus = RCC_CRS_NONE; + uint32_t tickstart; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Wait for CRS flag or timeout detection */ + do + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + crsstatus = RCC_CRS_TIMEOUT; + } + } + /* Check CRS SYNCOK flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCOK)) + { + /* CRS SYNC event OK */ + crsstatus |= RCC_CRS_SYNCOK; + + /* Clear CRS SYNC event OK bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCOK); + } + + /* Check CRS SYNCWARN flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCWARN)) + { + /* CRS SYNC warning */ + crsstatus |= RCC_CRS_SYNCWARN; + + /* Clear CRS SYNCWARN bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCWARN); + } + + /* Check CRS TRIM overflow flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_TRIMOVF)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_TRIMOVF; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_TRIMOVF); + } + + /* Check CRS Error flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCERR)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_SYNCERR; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCERR); + } + + /* Check CRS SYNC Missed flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCMISS)) + { + /* CRS SYNC Missed */ + crsstatus |= RCC_CRS_SYNCMISS; + + /* Clear CRS SYNC Missed bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCMISS); + } + + /* Check CRS Expected SYNC flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_ESYNC)) + { + /* frequency error counter reached a zero value */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_ESYNC); + } + } while (RCC_CRS_NONE == crsstatus); + + return crsstatus; +} + +/** + * @brief Handle the Clock Recovery System interrupt request. + * @retval None + */ +void HAL_RCCEx_CRS_IRQHandler(void) +{ + uint32_t crserror = RCC_CRS_NONE; + /* Get current IT flags and IT sources values */ + uint32_t itflags = READ_REG(CRS->ISR); + uint32_t itsources = READ_REG(CRS->CR); + + /* Check CRS SYNCOK flag */ + if (((itflags & RCC_CRS_FLAG_SYNCOK) != 0U) && ((itsources & RCC_CRS_IT_SYNCOK) != 0U)) + { + /* Clear CRS SYNC event OK flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC); + + /* user callback */ + HAL_RCCEx_CRS_SyncOkCallback(); + } + /* Check CRS SYNCWARN flag */ + else if (((itflags & RCC_CRS_FLAG_SYNCWARN) != 0U) && ((itsources & RCC_CRS_IT_SYNCWARN) != 0U)) + { + /* Clear CRS SYNCWARN flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC); + + /* user callback */ + HAL_RCCEx_CRS_SyncWarnCallback(); + } + /* Check CRS Expected SYNC flag */ + else if (((itflags & RCC_CRS_FLAG_ESYNC) != 0U) && ((itsources & RCC_CRS_IT_ESYNC) != 0U)) + { + /* frequency error counter reached a zero value */ + WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC); + + /* user callback */ + HAL_RCCEx_CRS_ExpectedSyncCallback(); + } + /* Check CRS Error flags */ + else + { + if (((itflags & RCC_CRS_FLAG_ERR) != 0U) && ((itsources & RCC_CRS_IT_ERR) != 0U)) + { + if ((itflags & RCC_CRS_FLAG_SYNCERR) != 0U) + { + crserror |= RCC_CRS_SYNCERR; + } + if ((itflags & RCC_CRS_FLAG_SYNCMISS) != 0U) + { + crserror |= RCC_CRS_SYNCMISS; + } + if ((itflags & RCC_CRS_FLAG_TRIMOVF) != 0U) + { + crserror |= RCC_CRS_TRIMOVF; + } + + /* Clear CRS Error flags */ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC); + + /* user error callback */ + HAL_RCCEx_CRS_ErrorCallback(crserror); + } + } +} + +/** + * @brief RCCEx Clock Recovery System SYNCOK interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncOkCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncOkCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System SYNCWARN interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncWarnCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncWarnCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Expected SYNC interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_ExpectedSyncCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ExpectedSyncCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Error interrupt callback. + * @param Error Combination of Error status. + * This parameter can be a combination of the following values: + * @arg @ref RCC_CRS_SYNCERR + * @arg @ref RCC_CRS_SYNCMISS + * @arg @ref RCC_CRS_TRIMOVF + * @retval none + */ +__weak void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Error); + + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ErrorCallback should be implemented in the user file + */ +} + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rtc.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rtc.c new file mode 100644 index 0000000..d62b056 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rtc.c @@ -0,0 +1,1922 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rtc.c + * @author MCD Application Team + * @brief RTC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Real-Time Clock (RTC) peripheral: + * + Initialization/de-initialization functions + * + Calendar (Time and Date) configuration + * + Alarms (Alarm A and Alarm B) configuration + * + WakeUp Timer configuration + * + TimeStamp configuration + * + Tampers configuration + * + Backup Data Registers configuration + * + RTC Tamper and TimeStamp Pins Selection + * + Interrupts and flags management + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### RTC Operating Condition ##### + =============================================================================== + [..] The real-time clock (RTC) and the RTC backup registers can be powered + from the VBAT voltage when the main VDD supply is powered off. + To retain the content of the RTC backup registers and supply the RTC + when VDD is turned off, VBAT pin can be connected to an optional + standby voltage supplied by a battery or by another source. + + ##### Backup Domain Reset ##### + =============================================================================== + [..] The backup domain reset sets all RTC registers and the RCC_BDCR register + to their reset values. + A backup domain reset is generated when one of the following events occurs: + (+) Software reset, triggered by setting the BDRST bit in the + RCC Backup domain control register (RCC_BDCR). + (+) VDD or VBAT power on, if both supplies have previously been powered off. + (+) Tamper detection event resets all data backup registers. + + ##### Backup Domain Access ##### + ============================================================================= + [..] After reset, the backup domain (RTC registers and RTC backup data registers) + is protected against possible unwanted write accesses. + [..] To enable access to the RTC Domain and RTC registers, proceed as follows: + (+) Enable the Power Controller (PWR) APB1 interface clock using the + __HAL_RCC_PWR_CLK_ENABLE() function. + (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function. + (+) Select the RTC clock source using the __HAL_RCC_RTC_CONFIG() function. + (+) Enable RTC Clock using the __HAL_RCC_RTC_ENABLE() function. + + [..] To enable access to the RTC Domain and RTC registers, proceed as follows: + (+) Call the function HAL_RCCEx_PeriphCLKConfig with RCC_PERIPHCLK_RTC for + PeriphClockSelection and select RTCClockSelection (LSE, LSI or HSEdiv32) + (+) Enable RTC Clock using the __HAL_RCC_RTC_ENABLE() macro. + + ##### How to use RTC Driver ##### + =================================================================== + [..] + (+) Enable the RTC domain access (see description in the section above). + (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour + format using the HAL_RTC_Init() function. + + *** Time and Date configuration *** + =================================== + [..] + (+) To configure the RTC Calendar (Time and Date) use the HAL_RTC_SetTime() + and HAL_RTC_SetDate() functions. + (+) To read the RTC Calendar, use the HAL_RTC_GetTime() and HAL_RTC_GetDate() functions. + + *** Alarm configuration *** + =========================== + [..] + (+) To configure the RTC Alarm use the HAL_RTC_SetAlarm() function. + You can also configure the RTC Alarm with interrupt mode using the + HAL_RTC_SetAlarm_IT() function. + (+) To read the RTC Alarm, use the HAL_RTC_GetAlarm() function. + + ##### RTC and low power modes ##### + ================================================================== + [..] The MCU can be woken up from a low power mode by an RTC alternate + function. + [..] The RTC alternate functions are the RTC alarms (Alarm A and Alarm B), + RTC wakeup, RTC tamper event detection and RTC time stamp event detection. + These RTC alternate functions can wake up the system from the Stop and + Standby low power modes. + [..] The system can also wake up from low power modes without depending + on an external interrupt (Auto-wakeup mode), by using the RTC alarm + or the RTC wakeup events. + [..] The RTC provides a programmable time base for waking up from the + Stop or Standby mode at regular intervals. + Wakeup from STOP and STANDBY modes is possible only when the RTC clock source + is LSE or LSI. + + *** Callback registration *** + ============================================= + + [..] + The compilation define USE_RTC_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Function HAL_RTC_RegisterCallback() to register an interrupt callback. + + [..] + Function HAL_RTC_RegisterCallback() allows to register following callbacks: + (+) AlarmAEventCallback : RTC Alarm A Event callback. + (+) AlarmBEventCallback : RTC Alarm B Event callback. + (+) TimeStampEventCallback : RTC TimeStamp Event callback. + (+) WakeUpTimerEventCallback : RTC WakeUpTimer Event callback. + (+) Tamper1EventCallback : RTC Tamper1Event callback. + (+) Tamper2EventCallback : RTC Tamper2Event callback. + (+) Tamper3EventCallback : RTC Tamper3Event callback. (*) + (+) InternalTamper3EventCallback : RTC Internal Tamper 3 Event callback. + (+) InternalTamper4EventCallback : RTC Internal Tamper 4 Event callback. + (+) InternalTamper5EventCallback : RTC Internal Tamper 5 Event callback. + (+) InternalTamper6EventCallback : RTC Internal Tamper 6 Event callback. + (+) MspInitCallback : RTC MspInit. + (+) MspDeInitCallback : RTC MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function HAL_RTC_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_RTC_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) AlarmAEventCallback : RTC Alarm A Event callback. + (+) AlarmBEventCallback : RTC Alarm B Event callback. + (+) TimeStampEventCallback : RTC TimeStamp Event callback. + (+) WakeUpTimerEventCallback : RTC WakeUpTimer Event callback. + (+) Tamper1EventCallback : RTC Tamper 1 Event callback. + (+) Tamper2EventCallback : RTC Tamper 2 Event callback. + (+) Tamper3EventCallback : RTC Tamper 3 Event callback.(*) + (+) InternalTamper3EventCallback : RTC Internal Tamper 3 Event callback. + (+) InternalTamper4EventCallback : RTC Internal Tamper 4 Event callback. + (+) InternalTamper5EventCallback : RTC Internal Tamper 5 Event callback. + (+) InternalTamper6EventCallback : RTC Internal Tamper 6 Event callback. + (+) MspInitCallback : RTC MspInit callback. + (+) MspDeInitCallback : RTC MspDeInit callback. + + [..] + By default, after the HAL_RTC_Init() and when the state is HAL_RTC_STATE_RESET, + all callbacks are set to the corresponding weak functions : + examples AlarmAEventCallback(), WakeUpTimerEventCallback(). + Exception done for MspInit and MspDeInit callbacks that are reset to the legacy weak function + in the HAL_RTC_Init()/HAL_RTC_DeInit() only when these callbacks are null + (not registered beforehand). + If not, MspInit or MspDeInit are not null, HAL_RTC_Init()/HAL_RTC_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + [..] + Callbacks can be registered/unregistered in HAL_RTC_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_RTC_STATE_READY or HAL_RTC_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_RTC_RegisterCallback() before calling HAL_RTC_DeInit() + or HAL_RTC_Init() function. + + [..] + When The compilation define USE_HAL_RTC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + + +/** @addtogroup RTC + * @brief RTC HAL module driver + * @{ + */ + +#ifdef HAL_RTC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup RTC_Exported_Functions + * @{ + */ + +/** @addtogroup RTC_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to initialize and configure the + RTC Prescaler (Synchronous and Asynchronous), RTC Hour format, disable + RTC registers Write protection, enter and exit the RTC initialization mode, + RTC registers synchronization check and reference clock detection enable. + (#) The RTC Prescaler is programmed to generate the RTC 1Hz time base. + It is split into 2 programmable prescalers to minimize power consumption. + (++) A 7-bit asynchronous prescaler and a 15-bit synchronous prescaler. + (++) When both prescalers are used, it is recommended to configure the + asynchronous prescaler to a high value to minimize power consumption. + (#) All RTC registers are Write protected. Writing to the RTC registers + is enabled by writing a key into the Write Protection register, RTC_WPR. + (#) To configure the RTC Calendar, user application should enter + initialization mode. In this mode, the calendar counter is stopped + and its value can be updated. When the initialization sequence is + complete, the calendar restarts counting after 4 RTCCLK cycles. + (#) To read the calendar through the shadow registers after Calendar + initialization, calendar update or after wakeup from low power modes + the software must first clear the RSF flag. The software must then + wait until it is set again before reading the calendar, which means + that the calendar registers have been correctly copied into the + RTC_TR and RTC_DR shadow registers.The HAL_RTC_WaitForSynchro() function + implements the above software sequence (RSF clear and RSF check). + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the RTC peripheral + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Check the RTC peripheral state */ + if(hrtc != NULL) + { + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance)); + assert_param(IS_RTC_HOUR_FORMAT(hrtc->Init.HourFormat)); + assert_param(IS_RTC_ASYNCH_PREDIV(hrtc->Init.AsynchPrediv)); + assert_param(IS_RTC_SYNCH_PREDIV(hrtc->Init.SynchPrediv)); + assert_param(IS_RTC_OUTPUT(hrtc->Init.OutPut)); + assert_param(IS_RTC_OUTPUT_REMAP(hrtc->Init.OutPutRemap)); + assert_param(IS_RTC_OUTPUT_POL(hrtc->Init.OutPutPolarity)); + assert_param(IS_RTC_OUTPUT_TYPE(hrtc->Init.OutPutType)); + assert_param(IS_RTC_OUTPUT_PULLUP(hrtc->Init.OutPutPullUp)); + + if(hrtc->State == HAL_RTC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hrtc->Lock = HAL_UNLOCKED; + + /* Process TAMP peripheral offset from RTC one */ + hrtc->TampOffset = (TAMP_BASE - RTC_BASE); + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + hrtc->AlarmAEventCallback = HAL_RTC_AlarmAEventCallback; /* Legacy weak AlarmAEventCallback */ + hrtc->AlarmBEventCallback = HAL_RTCEx_AlarmBEventCallback; /* Legacy weak AlarmBEventCallback */ + hrtc->TimeStampEventCallback = HAL_RTCEx_TimeStampEventCallback; /* Legacy weak TimeStampEventCallback */ + hrtc->WakeUpTimerEventCallback = HAL_RTCEx_WakeUpTimerEventCallback; /* Legacy weak WakeUpTimerEventCallback */ + hrtc->Tamper1EventCallback = HAL_RTCEx_Tamper1EventCallback; /* Legacy weak Tamper1EventCallback */ + hrtc->Tamper2EventCallback = HAL_RTCEx_Tamper2EventCallback; /* Legacy weak Tamper2EventCallback */ +#if defined(TAMP_CR1_TAMP3E) + hrtc->Tamper3EventCallback = HAL_RTCEx_Tamper3EventCallback; /* Legacy weak Tamper3EventCallback */ +#endif /* TAMP_CR1_TAMP3E */ + hrtc->InternalTamper3EventCallback = HAL_RTCEx_InternalTamper3EventCallback; /*!< Legacy weak InternalTamper3EventCallback */ + hrtc->InternalTamper4EventCallback = HAL_RTCEx_InternalTamper4EventCallback; /*!< Legacy weak InternalTamper4EventCallback */ + hrtc->InternalTamper5EventCallback = HAL_RTCEx_InternalTamper5EventCallback; /*!< Legacy weak InternalTamper5EventCallback */ + hrtc->InternalTamper6EventCallback = HAL_RTCEx_InternalTamper6EventCallback; /*!< Legacy weak InternalTamper6EventCallback */ + + if(hrtc->MspInitCallback == NULL) + { + hrtc->MspInitCallback = HAL_RTC_MspInit; + } + + /* Init the low level hardware */ + hrtc->MspInitCallback(hrtc); + + if(hrtc->MspDeInitCallback == NULL) + { + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + } +#else + /* Initialize RTC MSP */ + HAL_RTC_MspInit(hrtc); +#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */ + } + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Check whether the calendar needs to be initialized */ + if (__HAL_RTC_IS_CALENDAR_INITIALIZED(hrtc) == 0U) + { + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + + if(status == HAL_OK) + { + /* Clear RTC_CR FMT, OSEL and POL Bits */ + hrtc->Instance->CR &= ~(RTC_CR_FMT | RTC_CR_POL | RTC_CR_OSEL | RTC_CR_TAMPOE); + /* Set RTC_CR register */ + hrtc->Instance->CR |= (hrtc->Init.HourFormat | hrtc->Init.OutPut | hrtc->Init.OutPutPolarity); + + /* Configure the RTC PRER */ + hrtc->Instance->PRER = (hrtc->Init.SynchPrediv); + hrtc->Instance->PRER |= (hrtc->Init.AsynchPrediv << RTC_PRER_PREDIV_A_Pos); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + if (status == HAL_OK) + { + hrtc->Instance->CR &= ~(RTC_CR_TAMPALRM_PU |RTC_CR_TAMPALRM_TYPE | RTC_CR_OUT2EN); + hrtc->Instance->CR |= (hrtc->Init.OutPutPullUp | hrtc->Init.OutPutType | hrtc->Init.OutPutRemap); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + } + else + { + /* The calendar is already initialized */ + status = HAL_OK; + } + + if (status == HAL_OK) + { + hrtc->State = HAL_RTC_STATE_READY; + } + } + + return status; +} + +/** + * @brief DeInitialize the RTC peripheral. + * @note This function does not reset the RTC Backup Data registers. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc) +{ + HAL_StatusTypeDef status; + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance)); + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if(status == HAL_OK) + { + /* Reset TR, DR and CR registers */ + hrtc->Instance->TR = 0x00000000U; + hrtc->Instance->DR = ((uint32_t)(RTC_DR_WDU_0 | RTC_DR_MU_0 | RTC_DR_DU_0)); + /* Reset All CR bits except CR[2:0] */ + hrtc->Instance->CR &= RTC_CR_WUCKSEL; + + tickstart = HAL_GetTick(); + + /* Wait till WUTWF flag is set and if Time out is reached exit */ + while(((hrtc->Instance->ICSR) & RTC_ICSR_WUTWF) == 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + return HAL_TIMEOUT; + } + } + + /* Reset all RTC CR register bits */ + hrtc->Instance->CR &= 0x00000000U; + hrtc->Instance->WUTR = RTC_WUTR_WUT; + hrtc->Instance->PRER = ((uint32_t)(RTC_PRER_PREDIV_A | 0x000000FFU)); + hrtc->Instance->ALRMAR = 0x00000000U; + hrtc->Instance->ALRMBR = 0x00000000U; + hrtc->Instance->SHIFTR = 0x00000000U; + hrtc->Instance->CALR = 0x00000000U; + hrtc->Instance->ALRMASSR = 0x00000000U; + hrtc->Instance->ALRMBSSR = 0x00000000U; + + /* Exit initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + if(hrtc->MspDeInitCallback == NULL) + { + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + } + + /* DeInit the low level hardware: CLOCK, NVIC.*/ + hrtc->MspDeInitCallback(hrtc); + +#else + /* De-Initialize RTC MSP */ + HAL_RTC_MspDeInit(hrtc); +#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */ + + hrtc->State = HAL_RTC_STATE_RESET; + } + + /* Release Lock */ + __HAL_UNLOCK(hrtc); + + return status; +} + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User RTC Callback + * To be used instead of the weak predefined callback + * @param hrtc RTC handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID Alarm A Event Callback ID + * @arg @ref HAL_RTC_ALARM_B_EVENT_CB_ID Alarm B Event Callback ID + * @arg @ref HAL_RTC_TIMESTAMP_EVENT_CB_ID TimeStamp Event Callback ID + * @arg @ref HAL_RTC_WAKEUPTIMER_EVENT_CB_ID WakeUp Timer Event Callback ID + * @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID Tamper 1 Callback ID + * @arg @ref HAL_RTC_TAMPER2_EVENT_CB_ID Tamper 2 Callback ID + * @arg @ref HAL_RTC_TAMPER3_EVENT_CB_ID Tamper 3 Callback ID (*) + * @arg @ref HAL_RTC_INTERNAL_TAMPER3_EVENT_CB_ID Internal Tamper 3 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER4_EVENT_CB_ID Internal Tamper 4 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER5_EVENT_CB_ID Internal Tamper 5 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER6_EVENT_CB_ID Internal Tamper 6 Callback ID + * @arg @ref HAL_RTC_MSPINIT_CB_ID Msp Init callback ID + * @arg @ref HAL_RTC_MSPDEINIT_CB_ID Msp DeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(pCallback == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hrtc); + + if(HAL_RTC_STATE_READY == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_ALARM_A_EVENT_CB_ID : + hrtc->AlarmAEventCallback = pCallback; + break; + + case HAL_RTC_ALARM_B_EVENT_CB_ID : + hrtc->AlarmBEventCallback = pCallback; + break; + + case HAL_RTC_TIMESTAMP_EVENT_CB_ID : + hrtc->TimeStampEventCallback = pCallback; + break; + + case HAL_RTC_WAKEUPTIMER_EVENT_CB_ID : + hrtc->WakeUpTimerEventCallback = pCallback; + break; + + case HAL_RTC_TAMPER1_EVENT_CB_ID : + hrtc->Tamper1EventCallback = pCallback; + break; + + case HAL_RTC_TAMPER2_EVENT_CB_ID : + hrtc->Tamper2EventCallback = pCallback; + break; + +#if defined(TAMP_CR1_TAMP3E) + case HAL_RTC_TAMPER3_EVENT_CB_ID : + hrtc->Tamper3EventCallback = pCallback; + break; +#endif /* TAMP_CR1_TAMP3E */ + + case HAL_RTC_INTERNAL_TAMPER3_EVENT_CB_ID : + hrtc->InternalTamper3EventCallback = pCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER4_EVENT_CB_ID : + hrtc->InternalTamper4EventCallback = pCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER5_EVENT_CB_ID : + hrtc->InternalTamper5EventCallback = pCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER6_EVENT_CB_ID : + hrtc->InternalTamper6EventCallback = pCallback; + break; + + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = pCallback; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if(HAL_RTC_STATE_RESET == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = pCallback; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Unregister an RTC Callback + * RTC callback is redirected to the weak predefined callback + * @param hrtc RTC handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID Alarm A Event Callback ID + * @arg @ref HAL_RTC_ALARM_B_EVENT_CB_ID Alarm B Event Callback ID + * @arg @ref HAL_RTC_TIMESTAMP_EVENT_CB_ID TimeStamp Event Callback ID + * @arg @ref HAL_RTC_WAKEUPTIMER_EVENT_CB_ID WakeUp Timer Event Callback ID + * @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID Tamper 1 Callback ID + * @arg @ref HAL_RTC_TAMPER2_EVENT_CB_ID Tamper 2 Callback ID + * @arg @ref HAL_RTC_TAMPER3_EVENT_CB_ID Tamper 3 Callback ID (*) + * @arg @ref HAL_RTC_INTERNAL_TAMPER3_EVENT_CB_ID Internal Tamper 3 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER4_EVENT_CB_ID Internal Tamper 4 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER5_EVENT_CB_ID Internal Tamper 5 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER6_EVENT_CB_ID Internal Tamper 6 Callback ID + * @arg @ref HAL_RTC_MSPINIT_CB_ID Msp Init callback ID + * @arg @ref HAL_RTC_MSPDEINIT_CB_ID Msp DeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hrtc); + + if(HAL_RTC_STATE_READY == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_ALARM_A_EVENT_CB_ID : + hrtc->AlarmAEventCallback = HAL_RTC_AlarmAEventCallback; /* Legacy weak AlarmAEventCallback */ + break; + + case HAL_RTC_ALARM_B_EVENT_CB_ID : + hrtc->AlarmBEventCallback = HAL_RTCEx_AlarmBEventCallback; /* Legacy weak AlarmBEventCallback */ + break; + + case HAL_RTC_TIMESTAMP_EVENT_CB_ID : + hrtc->TimeStampEventCallback = HAL_RTCEx_TimeStampEventCallback; /* Legacy weak TimeStampEventCallback */ + break; + + case HAL_RTC_WAKEUPTIMER_EVENT_CB_ID : + hrtc->WakeUpTimerEventCallback = HAL_RTCEx_WakeUpTimerEventCallback; /* Legacy weak WakeUpTimerEventCallback */ + break; + + case HAL_RTC_TAMPER1_EVENT_CB_ID : + hrtc->Tamper1EventCallback = HAL_RTCEx_Tamper1EventCallback; /* Legacy weak Tamper1EventCallback */ + break; + + case HAL_RTC_TAMPER2_EVENT_CB_ID : + hrtc->Tamper2EventCallback = HAL_RTCEx_Tamper2EventCallback; /* Legacy weak Tamper2EventCallback */ + break; + +#if defined(TAMP_CR1_TAMP3E) + case HAL_RTC_TAMPER3_EVENT_CB_ID : + hrtc->Tamper3EventCallback = HAL_RTCEx_Tamper3EventCallback; /* Legacy weak Tamper3EventCallback */ + break; +#endif /* TAMP_CR1_TAMP3E */ + + case HAL_RTC_INTERNAL_TAMPER3_EVENT_CB_ID : + hrtc->InternalTamper3EventCallback = HAL_RTCEx_InternalTamper3EventCallback; /* Legacy weak InternalTamper3EventCallback */ + break; + + case HAL_RTC_INTERNAL_TAMPER4_EVENT_CB_ID : + hrtc->InternalTamper4EventCallback = HAL_RTCEx_InternalTamper4EventCallback; /* Legacy weak InternalTamper4EventCallback */ + break; + + case HAL_RTC_INTERNAL_TAMPER5_EVENT_CB_ID : + hrtc->InternalTamper5EventCallback = HAL_RTCEx_InternalTamper5EventCallback; /* Legacy weak InternalTamper5EventCallback */ + break; + + case HAL_RTC_INTERNAL_TAMPER6_EVENT_CB_ID : + hrtc->InternalTamper6EventCallback = HAL_RTCEx_InternalTamper6EventCallback; /* Legacy weak InternalTamper6EventCallback */ + break; + + + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = HAL_RTC_MspInit; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if(HAL_RTC_STATE_RESET == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = HAL_RTC_MspInit; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hrtc); + + return status; +} +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @brief Initialize the RTC MSP. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the RTC MSP. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTC_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group2 + * @brief RTC Time and Date functions + * +@verbatim + =============================================================================== + ##### RTC Time and Date functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure Time and Date features + +@endverbatim + * @{ + */ + +/** + * @brief Set RTC current time. + * @param hrtc RTC handle + * @param sTime Pointer to Time structure + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format) +{ + uint32_t tmpreg; + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_DAYLIGHT_SAVING(sTime->DayLightSaving)); + assert_param(IS_RTC_STORE_OPERATION(sTime->StoreOperation)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if(status == HAL_OK) + { + if(Format == RTC_FORMAT_BIN) + { + if((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(sTime->Hours)); + assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat)); + } + else + { + sTime->TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(sTime->Hours)); + } + assert_param(IS_RTC_MINUTES(sTime->Minutes)); + assert_param(IS_RTC_SECONDS(sTime->Seconds)); + + tmpreg = (uint32_t)(((uint32_t)RTC_ByteToBcd2(sTime->Hours) << RTC_TR_HU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sTime->Minutes) << RTC_TR_MNU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sTime->Seconds) << RTC_TR_SU_Pos) | \ + (((uint32_t)sTime->TimeFormat) << RTC_TR_PM_Pos)); + } + else + { + if((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sTime->Hours))); + assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat)); + } + else + { + sTime->TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sTime->Hours))); + } + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sTime->Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sTime->Seconds))); + tmpreg = (((uint32_t)(sTime->Hours) << RTC_TR_HU_Pos) | \ + ((uint32_t)(sTime->Minutes) << RTC_TR_MNU_Pos) | \ + ((uint32_t)(sTime->Seconds) << RTC_TR_SU_Pos) | \ + ((uint32_t)(sTime->TimeFormat) << RTC_TR_PM_Pos)); + } + + /* Set the RTC_TR register */ + hrtc->Instance->TR = (uint32_t)(tmpreg & RTC_TR_RESERVED_MASK); + + /* This interface is deprecated. To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions */ + hrtc->Instance->CR &= ((uint32_t)~RTC_CR_BKP); + + /* This interface is deprecated. To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions */ + hrtc->Instance->CR |= (uint32_t)(sTime->DayLightSaving | sTime->StoreOperation); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { + hrtc->State = HAL_RTC_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Get RTC current time. + * @note You can use SubSeconds and SecondFraction (sTime structure fields returned) to convert SubSeconds + * value in second fraction ratio with time unit following generic formula: + * Second fraction ratio * time_unit= [(SecondFraction-SubSeconds)/(SecondFraction+1)] * time_unit + * This conversion can be performed only if no shift operation is pending (ie. SHFP=0) when PREDIV_S >= SS + * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values + * in the higher-order calendar shadow registers to ensure consistency between the time and date values. + * Reading RTC current time locks the values in calendar shadow registers until Current date is read + * to ensure consistency between the time and date values. + * @param hrtc RTC handle + * @param sTime Pointer to Time structure with Hours, Minutes and Seconds fields returned + * with input format (BIN or BCD), also SubSeconds field returning the + * RTC_SSR register content and SecondFraction field the Synchronous pre-scaler + * factor to be used for second fraction ratio computation. + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Get subseconds structure field from the corresponding register*/ + sTime->SubSeconds = (uint32_t)(hrtc->Instance->SSR); + + /* Get SecondFraction structure field from the corresponding register field*/ + sTime->SecondFraction = (uint32_t)(hrtc->Instance->PRER & RTC_PRER_PREDIV_S); + + /* Get the TR register */ + tmpreg = (uint32_t)(hrtc->Instance->TR & RTC_TR_RESERVED_MASK); + + /* Fill the structure fields with the read parameters */ + sTime->Hours = (uint8_t)((tmpreg & (RTC_TR_HT | RTC_TR_HU)) >> RTC_TR_HU_Pos); + sTime->Minutes = (uint8_t)((tmpreg & (RTC_TR_MNT | RTC_TR_MNU)) >> RTC_TR_MNU_Pos); + sTime->Seconds = (uint8_t)((tmpreg & (RTC_TR_ST | RTC_TR_SU)) >> RTC_TR_SU_Pos); + sTime->TimeFormat = (uint8_t)((tmpreg & (RTC_TR_PM)) >> RTC_TR_PM_Pos); + + /* Check the input parameters format */ + if(Format == RTC_FORMAT_BIN) + { + /* Convert the time structure parameters to Binary format */ + sTime->Hours = (uint8_t)RTC_Bcd2ToByte(sTime->Hours); + sTime->Minutes = (uint8_t)RTC_Bcd2ToByte(sTime->Minutes); + sTime->Seconds = (uint8_t)RTC_Bcd2ToByte(sTime->Seconds); + } + + return HAL_OK; +} + +/** + * @brief Set RTC current date. + * @param hrtc RTC handle + * @param sDate Pointer to date structure + * @param Format specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format) +{ + uint32_t datetmpreg; + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + if((Format == RTC_FORMAT_BIN) && ((sDate->Month & 0x10U) == 0x10U)) + { + sDate->Month = (uint8_t)((sDate->Month & (uint8_t)~(0x10U)) + (uint8_t)0x0AU); + } + + assert_param(IS_RTC_WEEKDAY(sDate->WeekDay)); + + if(Format == RTC_FORMAT_BIN) + { + assert_param(IS_RTC_YEAR(sDate->Year)); + assert_param(IS_RTC_MONTH(sDate->Month)); + assert_param(IS_RTC_DATE(sDate->Date)); + + datetmpreg = (((uint32_t)RTC_ByteToBcd2(sDate->Year) << RTC_DR_YU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sDate->Month) << RTC_DR_MU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sDate->Date) << RTC_DR_DU_Pos) | \ + ((uint32_t)sDate->WeekDay << RTC_DR_WDU_Pos)); + } + else + { + assert_param(IS_RTC_YEAR(RTC_Bcd2ToByte(sDate->Year))); + assert_param(IS_RTC_MONTH(RTC_Bcd2ToByte(sDate->Month))); + assert_param(IS_RTC_DATE(RTC_Bcd2ToByte(sDate->Date))); + + datetmpreg = ((((uint32_t)sDate->Year) << RTC_DR_YU_Pos) | \ + (((uint32_t)sDate->Month) << RTC_DR_MU_Pos) | \ + (((uint32_t)sDate->Date) << RTC_DR_DU_Pos)| \ + (((uint32_t)sDate->WeekDay) << RTC_DR_WDU_Pos)); + } + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if(status == HAL_OK) + { + /* Set the RTC_DR register */ + hrtc->Instance->DR = (uint32_t)(datetmpreg & RTC_DR_RESERVED_MASK); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { + hrtc->State = HAL_RTC_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Get RTC current date. + * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values + * in the higher-order calendar shadow registers to ensure consistency between the time and date values. + * Reading RTC current time locks the values in calendar shadow registers until Current date is read. + * @param hrtc RTC handle + * @param sDate Pointer to Date structure + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format) +{ + uint32_t datetmpreg; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Get the DR register */ + datetmpreg = (uint32_t)(hrtc->Instance->DR & RTC_DR_RESERVED_MASK); + + /* Fill the structure fields with the read parameters */ + sDate->Year = (uint8_t)((datetmpreg & (RTC_DR_YT | RTC_DR_YU)) >> RTC_DR_YU_Pos); + sDate->Month = (uint8_t)((datetmpreg & (RTC_DR_MT | RTC_DR_MU)) >> RTC_DR_MU_Pos); + sDate->Date = (uint8_t)((datetmpreg & (RTC_DR_DT | RTC_DR_DU)) >> RTC_DR_DU_Pos); + sDate->WeekDay = (uint8_t)((datetmpreg & (RTC_DR_WDU)) >> RTC_DR_WDU_Pos); + + /* Check the input parameters format */ + if(Format == RTC_FORMAT_BIN) + { + /* Convert the date structure parameters to Binary format */ + sDate->Year = (uint8_t)RTC_Bcd2ToByte(sDate->Year); + sDate->Month = (uint8_t)RTC_Bcd2ToByte(sDate->Month); + sDate->Date = (uint8_t)RTC_Bcd2ToByte(sDate->Date); + } + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group3 + * @brief RTC Alarm functions + * +@verbatim + =============================================================================== + ##### RTC Alarm functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure Alarm feature + +@endverbatim + * @{ + */ +/** + * @brief Set the specified RTC Alarm. + * @param hrtc RTC handle + * @param sAlarm Pointer to Alarm structure + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format) +{ + uint32_t tickstart; + uint32_t tmpreg; + uint32_t subsecondtmpreg; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(sAlarm->Alarm)); + assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask)); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel)); + assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds)); + assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + if(Format == RTC_FORMAT_BIN) + { + if((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours)); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours)); + } + assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes)); + assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds)); + + if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay)); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay)); + } + + tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds) << RTC_ALRMAR_SU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + } + else + { + if((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + } + + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds))); + + if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); + } + + tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.Seconds) << RTC_ALRMAR_SU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos) | \ + ((uint32_t)(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + } + + /* Configure the Alarm A or Alarm B Sub Second registers */ + subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask)); + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the Alarm register */ + if(sAlarm->Alarm == RTC_ALARM_A) + { + /* Disable the Alarm A interrupt */ + __HAL_RTC_ALARMA_DISABLE(hrtc); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA); + + tickstart = HAL_GetTick(); + /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + hrtc->Instance->ALRMAR = (uint32_t)tmpreg; + /* Configure the Alarm A Sub Second register */ + hrtc->Instance->ALRMASSR = subsecondtmpreg; + /* Configure the Alarm state: Enable Alarm */ + __HAL_RTC_ALARMA_ENABLE(hrtc); + } + else + { + /* Disable the Alarm B interrupt */ + __HAL_RTC_ALARMB_DISABLE(hrtc); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRB); + + tickstart = HAL_GetTick(); + /* Wait till RTC ALRBWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + hrtc->Instance->ALRMBR = (uint32_t)tmpreg; + /* Configure the Alarm B Sub Second register */ + hrtc->Instance->ALRMBSSR = subsecondtmpreg; + /* Configure the Alarm state: Enable Alarm */ + __HAL_RTC_ALARMB_ENABLE(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Set the specified RTC Alarm with Interrupt. + * @note The Alarm register can only be written when the corresponding Alarm + * is disabled (Use the HAL_RTC_DeactivateAlarm()). + * @note The HAL_RTC_SetTime() must be called before enabling the Alarm feature. + * @param hrtc RTC handle + * @param sAlarm Pointer to Alarm structure + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format) +{ + uint32_t tickstart; + uint32_t tmpreg; + uint32_t subsecondtmpreg; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(sAlarm->Alarm)); + assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask)); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel)); + assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds)); + assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + if(Format == RTC_FORMAT_BIN) + { + if((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours)); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours)); + } + assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes)); + assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds)); + + if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay)); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay)); + } + tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds) << RTC_ALRMAR_SU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + } + else + { + if((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + } + + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds))); + + if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); + } + tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.Seconds) << RTC_ALRMAR_SU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos) | \ + ((uint32_t)(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + } + /* Configure the Alarm A or Alarm B Sub Second registers */ + subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask)); + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the Alarm register */ + if(sAlarm->Alarm == RTC_ALARM_A) + { + /* Disable the Alarm A interrupt */ + __HAL_RTC_ALARMA_DISABLE(hrtc); + + /* Clear flag alarm A */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); + + tickstart = HAL_GetTick(); + /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + hrtc->Instance->ALRMAR = (uint32_t)tmpreg; + /* Configure the Alarm A Sub Second register */ + hrtc->Instance->ALRMASSR = subsecondtmpreg; + /* Configure the Alarm state: Enable Alarm */ + __HAL_RTC_ALARMA_ENABLE(hrtc); + /* Configure the Alarm interrupt */ + __HAL_RTC_ALARM_ENABLE_IT(hrtc,RTC_IT_ALRA); + } + else + { + /* Disable the Alarm B interrupt */ + __HAL_RTC_ALARMB_DISABLE(hrtc); + + /* Clear flag alarm B */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_CLEAR_ALRBF); + + tickstart = HAL_GetTick(); + /* Wait till RTC ALRBWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + hrtc->Instance->ALRMBR = (uint32_t)tmpreg; + /* Configure the Alarm B Sub Second register */ + hrtc->Instance->ALRMBSSR = subsecondtmpreg; + /* Configure the Alarm state: Enable Alarm */ + __HAL_RTC_ALARMB_ENABLE(hrtc); + /* Configure the Alarm interrupt */ + __HAL_RTC_ALARM_ENABLE_IT(hrtc, RTC_IT_ALRB); + } + + /* RTC Alarm Interrupt Configuration: EXTI configuration */ + __HAL_RTC_ALARM_EXTI_ENABLE_IT(); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivate the specified RTC Alarm. + * @param hrtc RTC handle + * @param Alarm Specifies the Alarm. + * This parameter can be one of the following values: + * @arg RTC_ALARM_A: AlarmA + * @arg RTC_ALARM_B: AlarmB + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_RTC_ALARM(Alarm)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + if(Alarm == RTC_ALARM_A) + { + /* AlarmA */ + __HAL_RTC_ALARMA_DISABLE(hrtc); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA); + + tickstart = HAL_GetTick(); + + /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == 0U) + { + if( (HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + } + else + { + /* AlarmB */ + __HAL_RTC_ALARMB_DISABLE(hrtc); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_ALARM_DISABLE_IT(hrtc,RTC_IT_ALRB); + + tickstart = HAL_GetTick(); + + /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + } + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Get the RTC Alarm value and masks. + * @param hrtc RTC handle + * @param sAlarm Pointer to Date structure + * @param Alarm Specifies the Alarm. + * This parameter can be one of the following values: + * @arg RTC_ALARM_A: AlarmA + * @arg RTC_ALARM_B: AlarmB + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format) +{ + uint32_t tmpreg; + uint32_t subsecondtmpreg; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(Alarm)); + + if(Alarm == RTC_ALARM_A) + { + /* AlarmA */ + sAlarm->Alarm = RTC_ALARM_A; + + tmpreg = (uint32_t)(hrtc->Instance->ALRMAR); + subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMASSR ) & RTC_ALRMASSR_SS); + + /* Fill the structure with the read parameters */ + sAlarm->AlarmTime.Hours = (uint8_t)((tmpreg & (RTC_ALRMAR_HT | RTC_ALRMAR_HU)) >> RTC_ALRMAR_HU_Pos); + sAlarm->AlarmTime.Minutes = (uint8_t)((tmpreg & (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU)) >> RTC_ALRMAR_MNU_Pos); + sAlarm->AlarmTime.Seconds = (uint8_t)((tmpreg & (RTC_ALRMAR_ST | RTC_ALRMAR_SU)) >> RTC_ALRMAR_SU_Pos); + sAlarm->AlarmTime.TimeFormat = (uint8_t)((tmpreg & RTC_ALRMAR_PM) >> RTC_ALRMAR_PM_Pos); + sAlarm->AlarmTime.SubSeconds = (uint32_t) subsecondtmpreg; + sAlarm->AlarmDateWeekDay = (uint8_t)((tmpreg & (RTC_ALRMAR_DT | RTC_ALRMAR_DU)) >> RTC_ALRMAR_DU_Pos); + sAlarm->AlarmDateWeekDaySel = (uint32_t)(tmpreg & RTC_ALRMAR_WDSEL); + sAlarm->AlarmMask = (uint32_t)(tmpreg & RTC_ALARMMASK_ALL); + } + else + { + sAlarm->Alarm = RTC_ALARM_B; + + tmpreg = (uint32_t)(hrtc->Instance->ALRMBR); + subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMBSSR) & RTC_ALRMBSSR_SS); + + /* Fill the structure with the read parameters */ + sAlarm->AlarmTime.Hours = (uint8_t)((tmpreg & (RTC_ALRMBR_HT | RTC_ALRMBR_HU)) >> RTC_ALRMBR_HU_Pos); + sAlarm->AlarmTime.Minutes = (uint8_t)((tmpreg & (RTC_ALRMBR_MNT | RTC_ALRMBR_MNU)) >> RTC_ALRMBR_MNU_Pos); + sAlarm->AlarmTime.Seconds = (uint8_t)((tmpreg & (RTC_ALRMBR_ST | RTC_ALRMBR_SU)) >> RTC_ALRMBR_SU_Pos); + sAlarm->AlarmTime.TimeFormat = (uint8_t)((tmpreg & RTC_ALRMBR_PM) >> RTC_ALRMBR_PM_Pos); + sAlarm->AlarmTime.SubSeconds = (uint32_t) subsecondtmpreg; + sAlarm->AlarmDateWeekDay = (uint8_t)((tmpreg & (RTC_ALRMBR_DT | RTC_ALRMBR_DU)) >> RTC_ALRMBR_DU_Pos); + sAlarm->AlarmDateWeekDaySel = (uint32_t)(tmpreg & RTC_ALRMBR_WDSEL); + sAlarm->AlarmMask = (uint32_t)(tmpreg & RTC_ALARMMASK_ALL); + } + + if(Format == RTC_FORMAT_BIN) + { + sAlarm->AlarmTime.Hours = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours); + sAlarm->AlarmTime.Minutes = RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes); + sAlarm->AlarmTime.Seconds = RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds); + sAlarm->AlarmDateWeekDay = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay); + } + + return HAL_OK; +} + +/** + * @brief Handle Alarm interrupt request. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef* hrtc) +{ + /* Get the AlarmA interrupt source enable status */ + if(__HAL_RTC_ALARM_GET_IT_SOURCE(hrtc, RTC_IT_ALRA) != 0U) + { + /* Get the pending status of the AlarmA Interrupt */ + if(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) != 0U) + { + /* Clear the AlarmA interrupt pending bit */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Compare Match registered Callback */ + hrtc->AlarmAEventCallback(hrtc); +#else + /* AlarmA callback */ + HAL_RTC_AlarmAEventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + } + + /* Get the AlarmB interrupt source enable status */ + if(__HAL_RTC_ALARM_GET_IT_SOURCE(hrtc, RTC_IT_ALRB) != 0U) + { + /* Get the pending status of the AlarmB Interrupt */ + if(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBF) != 0U) + { + /* Clear the AlarmB interrupt pending bit */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_CLEAR_ALRBF); + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Compare Match registered Callback */ + hrtc->AlarmBEventCallback(hrtc); +#else + /* AlarmB callback */ + HAL_RTCEx_AlarmBEventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; +} + +/** + * @brief Alarm A callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTC_AlarmAEventCallback could be implemented in the user file + */ +} + +/** + * @brief Handle AlarmA Polling request. + * @param hrtc RTC handle + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + + uint32_t tickstart = HAL_GetTick(); + + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) == 0U) + { + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart ) > Timeout)||(Timeout == 0U)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + } + + /* Clear the Alarm interrupt pending bit */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group4 + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Wait for RTC Time and Date Synchronization + +@endverbatim + * @{ + */ + +/** + * @brief Wait until the RTC Time and Date registers (RTC_TR and RTC_DR) are + * synchronized with RTC APB clock. + * @note The RTC Resynchronization mode is write protected, use the + * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function. + * @note To read the calendar through the shadow registers after Calendar + * initialization, calendar update or after wakeup from low power modes + * the software must first clear the RSF flag. + * The software must then wait until it is set again before reading + * the calendar, which means that the calendar registers have been + * correctly copied into the RTC_TR and RTC_DR shadow registers. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc) +{ + uint32_t tickstart; + + /* Clear RSF flag, keep reserved bits at reset values (setting other flags has no effect) */ + hrtc->Instance->ICSR = ((uint32_t)(RTC_RSF_MASK & RTC_ICSR_RESERVED_MASK)); + + tickstart = HAL_GetTick(); + + /* Wait the registers to be synchronised */ + while((hrtc->Instance->ICSR & RTC_ICSR_RSF) == 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group5 + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Get RTC state + +@endverbatim + * @{ + */ +/** + * @brief Return the RTC handle state. + * @param hrtc RTC handle + * @retval HAL state + */ +HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef* hrtc) +{ + /* Return RTC handle state */ + return hrtc->State; +} + +/** + * @} + */ +/** + * @} + */ + +/** @addtogroup RTC_Private_Functions + * @{ + */ +/** + * @brief Enter the RTC Initialization mode. + * @note The RTC Initialization mode is write protected, use the + * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + + /* Check if the Initialization mode is set */ + if((hrtc->Instance->ICSR & RTC_ICSR_INITF) == 0U) + { + /* Set the Initialization mode */ + SET_BIT(hrtc->Instance->ICSR, RTC_ICSR_INIT); + + tickstart = HAL_GetTick(); + /* Wait till RTC is in INIT state and if Time out is reached exit */ + while(((hrtc->Instance->ICSR & RTC_ICSR_INITF) == 0U) && (status != HAL_TIMEOUT)) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + hrtc->State = HAL_RTC_STATE_TIMEOUT; + } + } + } + + return status; +} + +/** + * @brief Exit the RTC Initialization mode. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef RTC_ExitInitMode(RTC_HandleTypeDef *hrtc) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Exit Initialization mode */ + CLEAR_BIT(RTC->ICSR, RTC_ICSR_INIT); + + /* If CR_BYPSHAD bit = 0, wait for synchro */ + if (READ_BIT(RTC->CR, RTC_CR_BYPSHAD) == 0U) + { + if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + status = HAL_TIMEOUT; + } + } + else /* WA 2.7.1 Calendar initialization may fail in case of consecutive INIT mode entry. + Please look at STM32G0 Errata sheet on the internet for details. */ + { + /* Clear BYPSHAD bit */ + CLEAR_BIT(RTC->CR, RTC_CR_BYPSHAD); + if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + status = HAL_TIMEOUT; + } + /* Restore BYPSHAD bit */ + SET_BIT(RTC->CR, RTC_CR_BYPSHAD); + } + + return status; +} +/** + * @brief Convert a 2 digit decimal to BCD format. + * @param Value Byte to be converted + * @retval Converted byte + */ +uint8_t RTC_ByteToBcd2(uint8_t Value) +{ + uint32_t bcdhigh = 0U; + uint8_t Param = Value; + + while(Param >= 10U) + { + bcdhigh++; + Param -= 10U; + } + + return ((uint8_t)(bcdhigh << 4U) | Param); +} + +/** + * @brief Convert from 2 digit BCD to Binary. + * @param Value BCD value to be converted + * @retval Converted word + */ +uint8_t RTC_Bcd2ToByte(uint8_t Value) +{ + uint32_t tmp; + tmp = (((uint32_t)Value & 0xF0U) >> 4U) * 10U; + return (uint8_t)(tmp + ((uint32_t)Value & 0x0FU)); +} + +/** + * @brief Daylight Saving Time, Add one hour to the calendar in one single operation + * without going through the initialization procedure. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTC_DST_Add1Hour(RTC_HandleTypeDef *hrtc) +{ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + SET_BIT(hrtc->Instance->CR, RTC_CR_ADD1H); + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); +} + +/** + * @brief Daylight Saving Time, Subtract one hour from the calendar in one + * single operation without going through the initialization procedure. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTC_DST_Sub1Hour(RTC_HandleTypeDef *hrtc) +{ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + SET_BIT(hrtc->Instance->CR, RTC_CR_SUB1H); + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); +} + +/** + * @brief Daylight Saving Time, Set the store operation bit. + * @note It can be used by the software in order to memorize the DST status. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTC_DST_SetStoreOperation(RTC_HandleTypeDef *hrtc) +{ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + SET_BIT(hrtc->Instance->CR, RTC_CR_BKP); + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); +} + +/** + * @brief Daylight Saving Time, Clear the store operation bit. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTC_DST_ClearStoreOperation(RTC_HandleTypeDef *hrtc) +{ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + CLEAR_BIT(hrtc->Instance->CR, RTC_CR_BKP); + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); +} + +/** + * @brief Daylight Saving Time, Read the store operation bit. + * @param hrtc RTC handle + * @retval operation see RTC_StoreOperation_Definitions + */ +uint32_t HAL_RTC_DST_ReadStoreOperation(RTC_HandleTypeDef *hrtc) +{ + return READ_BIT(hrtc->Instance->CR, RTC_CR_BKP); +} + +/** + * @} + */ + +#endif /* HAL_RTC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + + diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rtc_ex.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rtc_ex.c new file mode 100644 index 0000000..173f535 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rtc_ex.c @@ -0,0 +1,1982 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_rtc_ex.c + * @author MCD Application Team + * @brief Extended RTC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Real Time Clock (RTC) Extended peripheral: + * + RTC Time Stamp functions + * + RTC Tamper functions + * + RTC Wake-up functions + * + Extended Control functions + * + Extended RTC features functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (+) Enable the RTC domain access. + (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour + format using the HAL_RTC_Init() function. + + *** RTC Wakeup configuration *** + ================================ + [..] + (+) To configure the RTC Wakeup Clock source and Counter use the HAL_RTCEx_SetWakeUpTimer() + function. You can also configure the RTC Wakeup timer with interrupt mode + using the HAL_RTCEx_SetWakeUpTimer_IT() function. + (+) To read the RTC WakeUp Counter register, use the HAL_RTCEx_GetWakeUpTimer() + function. + + *** Outputs configuration *** + ============================= + [..] The RTC has 2 different outputs: + (+) RTC_ALARM: this output is used to manage the RTC Alarm A, Alarm B + and WaKeUp signals. + To output the selected RTC signal, use the HAL_RTC_Init() function. + (+) RTC_CALIB: this output is 512Hz signal or 1Hz. + To enable the RTC_CALIB, use the HAL_RTCEx_SetCalibrationOutPut() function. + (+) Two pins can be used as RTC_ALARM or RTC_CALIB (PC13, PB2) managed on + the RTC_OR register. + (+) When the RTC_CALIB or RTC_ALARM output is selected, the RTC_OUT pin is + automatically configured in output alternate function. + + *** Smooth digital Calibration configuration *** + ================================================ + [..] + (+) Configure the RTC Original Digital Calibration Value and the corresponding + calibration cycle period (32s,16s and 8s) using the HAL_RTCEx_SetSmoothCalib() + function. + + *** TimeStamp configuration *** + =============================== + [..] + (+) Enable the RTC TimeStamp using the HAL_RTCEx_SetTimeStamp() function. + You can also configure the RTC TimeStamp with interrupt mode using the + HAL_RTCEx_SetTimeStamp_IT() function. + (+) To read the RTC TimeStamp Time and Date register, use the HAL_RTCEx_GetTimeStamp() + function. + + *** Internal TimeStamp configuration *** + =============================== + [..] + (+) Enable the RTC internal TimeStamp using the HAL_RTCEx_SetInternalTimeStamp() function. + User has to check internal timestamp occurrence using __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG. + (+) To read the RTC TimeStamp Time and Date register, use the HAL_RTCEx_GetTimeStamp() + function. + + *** Tamper configuration *** + ============================ + [..] + (+) Enable the RTC Tamper and configure the Tamper filter count, trigger Edge + or Level according to the Tamper filter (if equal to 0 Edge else Level) + value, sampling frequency, NoErase, MaskFlag, precharge or discharge and + Pull-UP using the HAL_RTCEx_SetTamper() function. You can configure RTC Tamper + with interrupt mode using HAL_RTCEx_SetTamper_IT() function. + (+) The default configuration of the Tamper erases the backup registers. To avoid + erase, enable the NoErase field on the RTC_TAMPCR register. + (+) With new RTC tamper configuration, you have to call HAL_RTC_Init() in order to + perform TAMP base address offset calculation. + (+) If you do not intend to have tamper using RTC clock, you can bypass its initialization + by setting ClockEnable inti field to RTC_CLOCK_DISABLE. + (+) Enable Internal tamper using HAL_RTCEx_SetInternalTamper. IT mode can be chosen using + setting Interrupt field. + + *** Backup Data Registers configuration *** + =========================================== + [..] + (+) To write to the RTC Backup Data registers, use the HAL_RTCEx_BKUPWrite() + function. + (+) To read the RTC Backup Data registers, use the HAL_RTCEx_BKUPRead() + function. + (+) Before calling those functions you have to call HAL_RTC_Init() in order to + perform TAMP base address offset calculation. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @addtogroup RTCEx + * @brief RTC Extended HAL module driver + * @{ + */ + +#ifdef HAL_RTC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup RTCEx_Exported_Functions + * @{ + */ + + +/** @addtogroup RTCEx_Exported_Functions_Group1 + * @brief RTC TimeStamp and Tamper functions + * +@verbatim + =============================================================================== + ##### RTC TimeStamp and Tamper functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure TimeStamp feature + +@endverbatim + * @{ + */ + +/** + * @brief Set TimeStamp. + * @note This API must be called before enabling the TimeStamp feature. + * @param hrtc RTC handle + * @param TimeStampEdge Specifies the pin edge on which the TimeStamp is + * activated. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the + * rising edge of the related pin. + * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the + * falling edge of the related pin. + * @param RTC_TimeStampPin specifies the RTC TimeStamp Pin. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin. + * The RTC TimeStamp Pin is per default PC13, but for reasons of + * compatibility, this parameter is required. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge)); + assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin)); + + /* Prevent unused argument(s) compilation warning if no assert_param check */ + UNUSED(RTC_TimeStampPin); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Get the RTC_CR register and clear the bits to be configured */ + tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); + + tmpreg|= TimeStampEdge; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the Time Stamp TSEDGE and Enable bits */ + hrtc->Instance->CR = (uint32_t)tmpreg; + + __HAL_RTC_TIMESTAMP_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Set TimeStamp with Interrupt. + * @note This API must be called before enabling the TimeStamp feature. + * @param hrtc RTC handle + * @param TimeStampEdge Specifies the pin edge on which the TimeStamp is + * activated. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the + * rising edge of the related pin. + * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the + * falling edge of the related pin. + * @param RTC_TimeStampPin Specifies the RTC TimeStamp Pin. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin. + * The RTC TimeStamp Pin is per default PC13, but for reasons of + * compatibility, this parameter is required. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge)); + assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin)); + + /* Prevent unused argument(s) compilation warning if no assert_param check */ + UNUSED(RTC_TimeStampPin); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Get the RTC_CR register and clear the bits to be configured */ + tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); + + tmpreg |= TimeStampEdge; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the Time Stamp TSEDGE and Enable bits */ + hrtc->Instance->CR = (uint32_t)tmpreg; + + __HAL_RTC_TIMESTAMP_ENABLE(hrtc); + + /* Enable IT timestamp */ + __HAL_RTC_TIMESTAMP_ENABLE_IT(hrtc,RTC_IT_TS); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* RTC timestamp Interrupt Configuration: EXTI configuration */ + __HAL_RTC_TIMESTAMP_EXTI_ENABLE_IT(); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivate TimeStamp. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc) +{ + uint32_t tmpreg; + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_TIMESTAMP_DISABLE_IT(hrtc, RTC_IT_TS); + + /* Get the RTC_CR register and clear the bits to be configured */ + tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); + + /* Configure the Time Stamp TSEDGE and Enable bits */ + hrtc->Instance->CR = (uint32_t)tmpreg; + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Set Internal TimeStamp. + * @note This API must be called before enabling the internal TimeStamp feature. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the internal Time Stamp Enable bits */ + __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivate Internal TimeStamp. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the internal Time Stamp Enable bits */ + __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Get the RTC TimeStamp value. + * @param hrtc RTC handle + * @param sTimeStamp Pointer to Time structure + * @param sTimeStampDate Pointer to Date structure + * @param Format specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef* sTimeStamp, RTC_DateTypeDef* sTimeStampDate, uint32_t Format) +{ + uint32_t tmptime, tmpdate; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Get the TimeStamp time and date registers values */ + tmptime = (uint32_t)(hrtc->Instance->TSTR & RTC_TR_RESERVED_MASK); + tmpdate = (uint32_t)(hrtc->Instance->TSDR & RTC_DR_RESERVED_MASK); + + /* Fill the Time structure fields with the read parameters */ + sTimeStamp->Hours = (uint8_t)((tmptime & (RTC_TR_HT | RTC_TR_HU)) >> RTC_TSTR_HU_Pos); + sTimeStamp->Minutes = (uint8_t)((tmptime & (RTC_TR_MNT | RTC_TR_MNU)) >>RTC_TSTR_MNU_Pos); + sTimeStamp->Seconds = (uint8_t)((tmptime & (RTC_TR_ST | RTC_TR_SU)) >> RTC_TSTR_SU_Pos); + sTimeStamp->TimeFormat = (uint8_t)((tmptime & (RTC_TR_PM)) >> RTC_TSTR_PM_Pos); + sTimeStamp->SubSeconds = (uint32_t) hrtc->Instance->TSSSR; + + /* Fill the Date structure fields with the read parameters */ + sTimeStampDate->Year = 0U; + sTimeStampDate->Month = (uint8_t)((tmpdate & (RTC_DR_MT | RTC_DR_MU)) >> RTC_TSDR_MU_Pos); + sTimeStampDate->Date = (uint8_t)(tmpdate & (RTC_DR_DT | RTC_DR_DU)); + sTimeStampDate->WeekDay = (uint8_t)((tmpdate & (RTC_DR_WDU)) >> RTC_TSDR_WDU_Pos); + + /* Check the input parameters format */ + if(Format == RTC_FORMAT_BIN) + { + /* Convert the TimeStamp structure parameters to Binary format */ + sTimeStamp->Hours = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Hours); + sTimeStamp->Minutes = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Minutes); + sTimeStamp->Seconds = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Seconds); + + /* Convert the DateTimeStamp structure parameters to Binary format */ + sTimeStampDate->Month = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Month); + sTimeStampDate->Date = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Date); + sTimeStampDate->WeekDay = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->WeekDay); + } + + /* Clear the TIMESTAMP Flags */ + __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_ITSF); + __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF); + + return HAL_OK; +} + +/** + * @brief TimeStamp callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_TimeStampEventCallback could be implemented in the user file + */ +} + + +/** + * @brief Handle TimeStamp interrupt request. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTCEx_TimeStampIRQHandler(RTC_HandleTypeDef *hrtc) +{ + /* Get the TimeStamp interrupt source enable status */ + if (READ_BIT(RTC->MISR, RTC_MISR_TSMF) != 0U) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call TimeStampEvent registered Callback */ + hrtc->TimeStampEventCallback(hrtc); +#else + /* TIMESTAMP callback */ + HAL_RTCEx_TimeStampEventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + + /* Clearing flags after the Callback because the content of RTC_TSTR and RTC_TSDR are cleared when TSF bit is reset.*/ + WRITE_REG(RTC->SCR, RTC_SCR_CITSF | RTC_SCR_CTSF); + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; +} + + +/** + * @brief Handle TimeStamp polling request. + * @param hrtc RTC handle + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + + while(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) == 0U) + { + if(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSOVF) != 0U) + { + /* Clear the TIMESTAMP OverRun Flag */ + __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF); + + /* Change TIMESTAMP state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + return HAL_ERROR; + } + + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart ) > Timeout)||(Timeout == 0U)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTCEx_Exported_Functions_Group2 + * @brief RTC Wake-up functions + * +@verbatim + =============================================================================== + ##### RTC Wake-up functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure Wake-up feature + +@endverbatim + * @{ + */ + +/** + * @brief Set wake up timer. + * @param hrtc RTC handle + * @param WakeUpCounter Wake up counter + * @param WakeUpClock Wake up clock + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock)); + assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Clear WUTE in RTC_CR to disable the wakeup timer */ + CLEAR_BIT(RTC->CR, RTC_CR_WUTE); + + /* Poll WUTWF until it is set in RTC_ICSR to make sure the access to wakeup autoreload + counter and to WUCKSEL[2:0] bits is allowed. This step must be skipped in + calendar initialization mode. */ + if (READ_BIT(RTC->ICSR, RTC_ICSR_INITF) == 0U) + { + tickstart = HAL_GetTick(); + while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + } + + /* Clear the Wakeup Timer clock source bits in CR register */ + hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL; + + /* Configure the clock source */ + hrtc->Instance->CR |= (uint32_t)WakeUpClock; + + /* Configure the Wakeup Timer counter */ + hrtc->Instance->WUTR = (uint32_t)WakeUpCounter; + + /* Enable the Wakeup Timer */ + __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Set wake up timer with interrupt. + * @param hrtc RTC handle + * @param WakeUpCounter Wake up counter + * @param WakeUpClock Wake up clock + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock)); + assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Disable the Wake-Up timer */ + __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc); + + /* Clear flag Wake-Up */ + __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF); + + /* Poll WUTWF until it is set in RTC_ICSR to make sure the access to wakeup autoreload + counter and to WUCKSEL[2:0] bits is allowed. This step must be skipped in + calendar initialization mode. */ + if (READ_BIT(RTC->ICSR, RTC_ICSR_INITF) == 0U) + { + tickstart = HAL_GetTick(); + while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + } + + /* Configure the Wakeup Timer counter */ + hrtc->Instance->WUTR = (uint32_t)WakeUpCounter; + + /* Clear the Wakeup Timer clock source bits in CR register */ + hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL; + + /* Configure the clock source */ + hrtc->Instance->CR |= (uint32_t)WakeUpClock; + + /* RTC WakeUpTimer Interrupt Configuration: EXTI configuration */ + __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT(); + + /* Configure the Interrupt in the RTC_CR register */ + __HAL_RTC_WAKEUPTIMER_ENABLE_IT(hrtc,RTC_IT_WUT); + + /* Enable the Wakeup Timer */ + __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivate wake up timer counter. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc) +{ + uint32_t tickstart; + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Disable the Wakeup Timer */ + __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_WAKEUPTIMER_DISABLE_IT(hrtc,RTC_IT_WUT); + + tickstart = HAL_GetTick(); + /* Wait till RTC WUTWF flag is set and if Time out is reached exit */ + while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Get wake up timer counter. + * @param hrtc RTC handle + * @retval Counter value + */ +uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc) +{ + /* Get the counter value */ + return ((uint32_t)(hrtc->Instance->WUTR & RTC_WUTR_WUT)); +} + +/** + * @brief Handle Wake Up Timer interrupt request. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc) +{ + /* Get the pending status of the WAKEUPTIMER Interrupt */ + if(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) != 0U) + { + /* Clear the WAKEUPTIMER interrupt pending bit */ + __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF); + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call WakeUpTimerEvent registered Callback */ + hrtc->WakeUpTimerEventCallback(hrtc); +#else + /* WAKEUPTIMER callback */ + HAL_RTCEx_WakeUpTimerEventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; +} + +/** + * @brief Wake Up Timer callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_WakeUpTimerEventCallback could be implemented in the user file + */ +} + + +/** + * @brief Handle Wake Up Timer Polling. + * @param hrtc RTC handle + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + + while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) == 0U) + { + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart ) > Timeout)||(Timeout == 0U)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + } + + /* Clear the WAKEUPTIMER Flag */ + __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +/** + * @} + */ + + +/** @addtogroup RTCEx_Exported_Functions_Group3 + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Write a data in a specified RTC Backup data register + (+) Read a data in a specified RTC Backup data register + (+) Set the Coarse calibration parameters. + (+) Deactivate the Coarse calibration parameters + (+) Set the Smooth calibration parameters. + (+) Configure the Synchronization Shift Control Settings. + (+) Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + (+) Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + (+) Enable the RTC reference clock detection. + (+) Disable the RTC reference clock detection. + (+) Enable the Bypass Shadow feature. + (+) Disable the Bypass Shadow feature. + +@endverbatim + * @{ + */ + + + +/** + * @brief Set the Smooth calibration parameters. + * @note To deactivate the smooth calibration, the field SmoothCalibPlusPulses + * must be equal to SMOOTHCALIB_PLUSPULSES_RESET and the field + * SmoothCalibMinusPulsesValue must be equal to 0. + * @param hrtc RTC handle + * @param SmoothCalibPeriod Select the Smooth Calibration Period. + * This parameter can be can be one of the following values : + * @arg RTC_SMOOTHCALIB_PERIOD_32SEC: The smooth calibration period is 32s. + * @arg RTC_SMOOTHCALIB_PERIOD_16SEC: The smooth calibration period is 16s. + * @arg RTC_SMOOTHCALIB_PERIOD_8SEC: The smooth calibration period is 8s. + * @param SmoothCalibPlusPulses Select to Set or reset the CALP bit. + * This parameter can be one of the following values: + * @arg RTC_SMOOTHCALIB_PLUSPULSES_SET: Add one RTCCLK pulse every 2*11 pulses. + * @arg RTC_SMOOTHCALIB_PLUSPULSES_RESET: No RTCCLK pulses are added. + * @param SmoothCalibMinusPulsesValue Select the value of CALM[8:0] bits. + * This parameter can be one any value from 0 to 0x000001FF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef* hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(SmoothCalibPeriod)); + assert_param(IS_RTC_SMOOTH_CALIB_PLUS(SmoothCalibPlusPulses)); + assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmoothCalibMinusPulsesValue)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* check if a calibration is pending*/ + if((hrtc->Instance->ICSR & RTC_ICSR_RECALPF) != 0U) + { + tickstart = HAL_GetTick(); + + /* check if a calibration is pending*/ + while((hrtc->Instance->ICSR & RTC_ICSR_RECALPF) != 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + } + + /* Configure the Smooth calibration settings */ + hrtc->Instance->CALR = (uint32_t)((uint32_t)SmoothCalibPeriod | (uint32_t)SmoothCalibPlusPulses | (uint32_t)SmoothCalibMinusPulsesValue); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Configure the Synchronization Shift Control Settings. + * @note When REFCKON is set, firmware must not write to Shift control register. + * @param hrtc RTC handle + * @param ShiftAdd1S Select to add or not 1 second to the time calendar. + * This parameter can be one of the following values: + * @arg RTC_SHIFTADD1S_SET: Add one second to the clock calendar. + * @arg RTC_SHIFTADD1S_RESET: No effect. + * @param ShiftSubFS Select the number of Second Fractions to substitute. + * This parameter can be one any value from 0 to 0x7FFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef* hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_RTC_SHIFT_ADD1S(ShiftAdd1S)); + assert_param(IS_RTC_SHIFT_SUBFS(ShiftSubFS)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + tickstart = HAL_GetTick(); + + /* Wait until the shift is completed*/ + while((hrtc->Instance->ICSR & RTC_ICSR_SHPF) != 0U) + { + if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + /* Check if the reference clock detection is disabled */ + if((hrtc->Instance->CR & RTC_CR_REFCKON) == 0U) + { + /* Configure the Shift settings */ + hrtc->Instance->SHIFTR = (uint32_t)(uint32_t)(ShiftSubFS) | (uint32_t)(ShiftAdd1S); + + /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ + if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == 0U) + { + if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + } + } + else + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + * @param hrtc RTC handle + * @param CalibOutput Select the Calibration output Selection . + * This parameter can be one of the following values: + * @arg RTC_CALIBOUTPUT_512HZ: A signal has a regular waveform at 512Hz. + * @arg RTC_CALIBOUTPUT_1HZ: A signal has a regular waveform at 1Hz. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef* hrtc, uint32_t CalibOutput) +{ + /* Check the parameters */ + assert_param(IS_RTC_CALIB_OUTPUT(CalibOutput)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Clear flags before config */ + hrtc->Instance->CR &= (uint32_t)~RTC_CR_COSEL; + + /* Configure the RTC_CR register */ + hrtc->Instance->CR |= (uint32_t)CalibOutput; + + __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef* hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Enable the RTC reference clock detection. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef* hrtc) +{ + HAL_StatusTypeDef status; + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if(status == HAL_OK) + { + /* Enable clockref detection */ + __HAL_RTC_CLOCKREF_DETECTION_ENABLE(hrtc); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { + hrtc->State = HAL_RTC_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Disable the RTC reference clock detection. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef* hrtc) +{ + HAL_StatusTypeDef status; + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if (status == HAL_OK) + { + /* Disable clockref detection */ + __HAL_RTC_CLOCKREF_DETECTION_DISABLE(hrtc); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { + hrtc->State = HAL_RTC_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Enable the Bypass Shadow feature. + * @note When the Bypass Shadow is enabled the calendar value are taken + * directly from the Calendar counter. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef* hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Set the BYPSHAD bit */ + hrtc->Instance->CR |= (uint8_t)RTC_CR_BYPSHAD; + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Disable the Bypass Shadow feature. + * @note When the Bypass Shadow is enabled the calendar value are taken + * directly from the Calendar counter. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef* hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Reset the BYPSHAD bit */ + hrtc->Instance->CR &= ((uint8_t)~RTC_CR_BYPSHAD); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTCEx_Exported_Functions_Group4 + * @brief Extended features functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) RTC Alarm B callback + (+) RTC Poll for Alarm B request + +@endverbatim + * @{ + */ + +/** + * @brief Alarm B callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_AlarmBEventCallback could be implemented in the user file + */ +} + +/** + * @brief Handle Alarm B Polling request. + * @param hrtc RTC handle + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + + while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBF) == 0U) + { + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart ) > Timeout)||(Timeout == 0U)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + } + + /* Clear the Alarm Flag */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTCEx_Exported_Functions_Group5 + * @brief Extended RTC Tamper functions + * +@verbatim + ============================================================================== + ##### Tamper functions ##### + ============================================================================== + [..] + (+) Before calling any tamper or internal tamper function, you have to call first + HAL_RTC_Init() function. + (+) In that ine you can select to output tamper event on RTC pin. + [..] + (+) Enable the Tamper and configure the Tamper filter count, trigger Edge + or Level according to the Tamper filter (if equal to 0 Edge else Level) + value, sampling frequency, NoErase, MaskFlag, precharge or discharge and + Pull-UP, timestamp using the HAL_RTCEx_SetTamper() function. + You can configure Tamper with interrupt mode using HAL_RTCEx_SetTamper_IT() function. + (+) The default configuration of the Tamper erases the backup registers. To avoid + erase, enable the NoErase field on the TAMP_TAMPCR register. + [..] + (+) Enable Internal Tamper and configure it with interrupt, timestamp using + the HAL_RTCEx_SetInternalTamper() function. + +@endverbatim + * @{ + */ + + +/** + * @brief Set Tamper + * @param hrtc RTC handle + * @param sTamper Pointer to Tamper Structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper) +{ + uint32_t tmpreg; + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + /* Check the parameters */ + assert_param(IS_RTC_TAMPER(sTamper->Tamper)); + assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); + assert_param(IS_RTC_TAMPER_ERASE_MODE(sTamper->NoErase)); + assert_param(IS_RTC_TAMPER_MASKFLAG_STATE(sTamper->MaskFlag)); + assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter)); + assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency)); + assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration)); + assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp)); + assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection)); + + /* Configuration register 2 */ + tmpreg = tamp->CR2; + tmpreg &= ~((sTamper->Tamper << 24) | (sTamper->Tamper << 16) | (sTamper->Tamper)); + + if(sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE) + { + tmpreg |= (sTamper->Tamper << 24); + } + + if(sTamper->MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE) + { + tmpreg |= (sTamper->Tamper << 16); + } + + if(sTamper->NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE) + { + tmpreg |= sTamper->Tamper; + } + tamp->CR2 = tmpreg; + + /* Filter control register */ + tamp->FLTCR = (sTamper->Filter) | (sTamper->SamplingFrequency) | \ + (sTamper->PrechargeDuration) | (sTamper->TamperPullUp); + + /* timestamp on tamper */ + if((hrtc->Instance->CR & RTC_CR_TAMPTS) != (sTamper->TimeStampOnTamperDetection)) + { + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + tmpreg = (hrtc->Instance->CR & ~RTC_CR_TAMPTS); + hrtc->Instance->CR = (tmpreg | (sTamper->TimeStampOnTamperDetection)); + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + } + + /* Control register 1 */ + tamp->CR1 |= (sTamper->Tamper); + + return HAL_OK; +} + + +/** + * @brief Set Tamper in IT mode + * @param hrtc RTC handle + * @param sTamper Pointer to Tamper Structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper) +{ + uint32_t tmpreg; + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + /* Check the parameters */ + assert_param(IS_RTC_TAMPER(sTamper->Tamper)); + assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); + assert_param(IS_RTC_TAMPER_ERASE_MODE(sTamper->NoErase)); + assert_param(IS_RTC_TAMPER_MASKFLAG_STATE(sTamper->MaskFlag)); + assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter)); + assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency)); + assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration)); + assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp)); + assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection)); + + /* Configuration register 2 */ + tmpreg = tamp->CR2; + tmpreg &= ~((sTamper->Tamper << 24) | (sTamper->Tamper << 16) | (sTamper->Tamper)); + + if(sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE) + { + tmpreg |= (sTamper->Tamper << 24); + } + + if(sTamper->MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE) + { + tmpreg |= (sTamper->Tamper << 16); + } + + if(sTamper->NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE) + { + tmpreg |= sTamper->Tamper; + } + tamp->CR2 = tmpreg; + + /* Filter control register */ + tamp->FLTCR = (sTamper->Filter) | (sTamper->SamplingFrequency) | \ + (sTamper->PrechargeDuration) | (sTamper->TamperPullUp); + + /* timestamp on tamper */ + if((hrtc->Instance->CR & RTC_CR_TAMPTS) != (sTamper->TimeStampOnTamperDetection)) + { + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + tmpreg = (hrtc->Instance->CR & ~RTC_CR_TAMPTS); + hrtc->Instance->CR = (tmpreg | (sTamper->TimeStampOnTamperDetection)); + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + } + + /* RTC Tamper Interrupt Configuration: EXTI configuration */ + __HAL_RTC_TAMPER_EXTI_ENABLE_IT(); + + /* Interrupt enable register */ + tamp->IER |= sTamper->Tamper; + + /* Control register 1 */ + tamp->CR1 |= (sTamper->Tamper); + + return HAL_OK; +} + + + +/** + * @brief Deactivate Tamper. + * @param hrtc RTC handle + * @param Tamper Selected tamper pin. + * This parameter can be a combination of the following values: + * @arg RTC_TAMPER_1 + * @arg RTC_TAMPER_2 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper) +{ + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + assert_param(IS_RTC_TAMPER(Tamper)); + + /* Disable the selected Tamper pin */ + tamp->CR1 &= ~Tamper; + + /* Clear tamper mask/noerase/trigger configuration */ + tamp->CR2 &= ~((Tamper << 24) | (Tamper << 16) | Tamper); + + /* Clear tamper interrupt mode configuration */ + tamp->IER &= ~Tamper; + + return HAL_OK; +} + + +/** + * @brief Tamper event polling. + * @param hrtc RTC handle + * @param Tamper Selected tamper pin. + * This parameter can be a combination of the following values: + * @arg RTC_TAMPER_1 + * @arg RTC_TAMPER_2 + * @arg RTC_TAMPER_3 (*) + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForTamperEvent(RTC_HandleTypeDef *hrtc, uint32_t Tamper, uint32_t Timeout) +{ + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + assert_param(IS_RTC_TAMPER(Tamper)); + + uint32_t tickstart = HAL_GetTick(); + + /* Get the status of the Interrupt */ + while((tamp->SR & Tamper) != Tamper) + { + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart ) > Timeout)||(Timeout == 0U)) + { + return HAL_TIMEOUT; + } + } + } + + /* Clear the Tamper Flag */ + tamp->SCR = Tamper; + + return HAL_OK; +} + + +/** + * @brief Set Internal Tamper in interrupt mode + * @param hrtc RTC handle + * @param sIntTamper Pointer to Internal Tamper Structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetInternalTamper(RTC_HandleTypeDef *hrtc, RTC_InternalTamperTypeDef* sIntTamper) +{ + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_RTC_INTERNAL_TAMPER(sIntTamper->IntTamper)); + assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sIntTamper->TimeStampOnTamperDetection)); + + /* timestamp on internal tamper */ + if((hrtc->Instance->CR & RTC_CR_TAMPTS) != (sIntTamper->TimeStampOnTamperDetection)) + { + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + tmpreg = (hrtc->Instance->CR & ~RTC_CR_TAMPTS); + hrtc->Instance->CR = (tmpreg | (sIntTamper->TimeStampOnTamperDetection)); + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + } + + /* Control register 1 */ + tamp->CR1 |= (sIntTamper->IntTamper); + + return HAL_OK; +} + + +/** + * @brief Set Internal Tamper + * @param hrtc RTC handle + * @param sIntTamper Pointer to Internal Tamper Structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetInternalTamper_IT(RTC_HandleTypeDef *hrtc, RTC_InternalTamperTypeDef* sIntTamper) +{ + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_RTC_INTERNAL_TAMPER(sIntTamper->IntTamper)); + assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sIntTamper->TimeStampOnTamperDetection)); + + /* timestamp on internal tamper */ + if((hrtc->Instance->CR & RTC_CR_TAMPTS) != (sIntTamper->TimeStampOnTamperDetection)) + { + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + tmpreg = (hrtc->Instance->CR & ~RTC_CR_TAMPTS); + hrtc->Instance->CR = (tmpreg | (sIntTamper->TimeStampOnTamperDetection)); + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + } + + /* RTC Tamper Interrupt Configuration: EXTI configuration */ + __HAL_RTC_TAMPER_EXTI_ENABLE_IT(); + + /* Interrupt enable register */ + tamp->IER |= sIntTamper->IntTamper; + + /* Control register 1 */ + tamp->CR1 |= (sIntTamper->IntTamper); + + return HAL_OK; +} + +/** + * @brief Deactivate Internal Tamper. + * @param hrtc RTC handle + * @param IntTamper Selected internal tamper event. + * This parameter can be any combination of existing internal tampers. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTamper(RTC_HandleTypeDef *hrtc, uint32_t IntTamper) +{ + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + assert_param(IS_RTC_INTERNAL_TAMPER(IntTamper)); + + /* Disable the selected Tamper pin */ + tamp->CR1 &= ~IntTamper; + + /* Clear internal tamper interrupt mode configuration */ + tamp->IER &= ~IntTamper; + + return HAL_OK; +} + + +/** + * @brief Internal Tamper event polling. + * @param hrtc RTC handle + * @param IntTamper selected tamper. + * This parameter can be any combination of existing internal tampers. + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForInternalTamperEvent(RTC_HandleTypeDef *hrtc, uint32_t IntTamper, uint32_t Timeout) +{ + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + assert_param(IS_RTC_INTERNAL_TAMPER(IntTamper)); + + uint32_t tickstart = HAL_GetTick(); + + /* Get the status of the Interrupt */ + while((tamp->SR & IntTamper) != IntTamper) + { + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart ) > Timeout)||(Timeout == 0U)) + { + return HAL_TIMEOUT; + } + } + } + + /* Clear the Tamper Flag */ + tamp->SCR = IntTamper; + + return HAL_OK; +} + + +/** + * @brief Handle Tamper interrupt request. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc) +{ + uint32_t tmp; + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + /* Get interrupt status */ + tmp = tamp->MISR; + + /* Immediately clear flags */ + tamp->SCR = tmp; + + /* Check Tamper1 status */ + if((tmp & RTC_TAMPER_1) == RTC_TAMPER_1) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Tamper 1 Event registered Callback */ + hrtc->Tamper1EventCallback(hrtc); +#else + /* Tamper1 callback */ + HAL_RTCEx_Tamper1EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Tamper2 status */ + if((tmp & RTC_TAMPER_2) == RTC_TAMPER_2) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Tamper 2 Event registered Callback */ + hrtc->Tamper2EventCallback(hrtc); +#else + /* Tamper2 callback */ + HAL_RTCEx_Tamper2EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + +#if defined(TAMP_CR1_TAMP3E) + /* Check Tamper3 status */ + if((tmp & RTC_TAMPER_3) == RTC_TAMPER_3) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Tamper 3 Event registered Callback */ + hrtc->Tamper3EventCallback(hrtc); +#else + /* Tamper3 callback */ + HAL_RTCEx_Tamper3EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } +#endif /* TAMP_CR1_TAMP3E */ + + /* Check Internal Tamper3 status */ + if((tmp & RTC_INT_TAMPER_3) == RTC_INT_TAMPER_3) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Internal Tamper 3 Event registered Callback */ + hrtc->InternalTamper3EventCallback(hrtc); +#else + /* Internal Tamper3 callback */ + HAL_RTCEx_InternalTamper3EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Internal Tamper4 status */ + if((tmp & RTC_INT_TAMPER_4) == RTC_INT_TAMPER_4) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Internal Tamper 4 Event registered Callback */ + hrtc->InternalTamper4EventCallback(hrtc); +#else + /* Internal Tamper4 callback */ + HAL_RTCEx_InternalTamper4EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Internal Tamper5 status */ + if((tmp & RTC_INT_TAMPER_5) == RTC_INT_TAMPER_5) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Internal Tamper 5 Event registered Callback */ + hrtc->InternalTamper5EventCallback(hrtc); +#else + /* Internal Tamper5 callback */ + HAL_RTCEx_InternalTamper5EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Internal Tamper6 status */ + if((tmp & RTC_INT_TAMPER_6) == RTC_INT_TAMPER_6) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Internal Tamper 6 Event registered Callback */ + hrtc->InternalTamper6EventCallback(hrtc); +#else + /* Internal Tamper6 callback */ + HAL_RTCEx_InternalTamper6EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + +} + + +/** + * @brief Tamper 1 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_Tamper1EventCallback could be implemented in the user file + */ +} + + +/** + * @brief Tamper 2 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_Tamper2EventCallback could be implemented in the user file + */ +} + +#if defined(TAMP_CR1_TAMP3E) +/** + * @brief Tamper 3 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_Tamper2EventCallback could be implemented in the user file + */ +} +#endif /* TAMP_CR1_TAMP3E */ + +/** + * @brief Internal Tamper 3 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_InternalTamper3EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_InternalTamper3EventCallback could be implemented in the user file + */ +} + + +/** + * @brief Internal Tamper 4 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_InternalTamper4EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_InternalTamper4EventCallback could be implemented in the user file + */ +} + + +/** + * @brief Internal Tamper 5 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_InternalTamper5EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_InternalTamper5EventCallback could be implemented in the user file + */ +} + + +/** + * @brief Internal Tamper 6 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_InternalTamper6EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_InternalTamper6EventCallback could be implemented in the user file + */ +} + + + +/** + * @} + */ + + +/** @addtogroup RTCEx_Exported_Functions_Group6 + * @brief Extended RTC Backup register functions + * +@verbatim + =============================================================================== + ##### Extended RTC Backup register functions ##### + =============================================================================== + [..] + (+) Before calling any tamper or internal tamper function, you have to call first + HAL_RTC_Init() function. + (+) In that ine you can select to output tamper event on RTC pin. + [..] + This subsection provides functions allowing to + (+) Write a data in a specified RTC Backup data register + (+) Read a data in a specified RTC Backup data register +@endverbatim + * @{ + */ + + +/** + * @brief Write a data in a specified RTC Backup data register. + * @param hrtc RTC handle + * @param BackupRegister: RTC Backup data Register number. + * This parameter can be: RTC_BKP_DRx where x can be from 0 to 4 + * specify the register. + * @param Data Data to be written in the specified Backup data register. + * @retval None + */ +void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data) +{ + uint32_t tmp; + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + /* Check the parameters */ + assert_param(IS_RTC_BKP(BackupRegister)); + + tmp = (uint32_t)&(tamp->BKP0R); + tmp += (BackupRegister * 4U); + + /* Write the specified register */ + *(__IO uint32_t *)tmp = (uint32_t)Data; +} + + +/** + * @brief Reads data from the specified RTC Backup data Register. + * @param hrtc RTC handle + * @param BackupRegister RTC Backup data Register number. + * This parameter can be: RTC_BKP_DRx where x can be from 0 to 4 + * specify the register. + * @retval Read value + */ +uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister) +{ + uint32_t tmp ; + /* Process TAMP instance pointer */ + TAMP_TypeDef *tamp = (TAMP_TypeDef *)((uint32_t)hrtc->Instance + hrtc->TampOffset); + + /* Check the parameters */ + assert_param(IS_RTC_BKP(BackupRegister)); + + tmp = (uint32_t)&(tamp->BKP0R); + tmp += (BackupRegister * 4U); + + /* Read the specified register */ + return (*(__IO uint32_t *)tmp); +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RTC_MODULE_ENABLED */ +/** + * @} + */ + + +/** + * @} + */ + + + diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi.c new file mode 100644 index 0000000..b7efc99 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi.c @@ -0,0 +1,4429 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_spi.c + * @author MCD Application Team + * @brief SPI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Serial Peripheral Interface (SPI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The SPI HAL driver can be used as follows: + + (#) Declare a SPI_HandleTypeDef handle structure, for example: + SPI_HandleTypeDef hspi; + + (#)Initialize the SPI low level resources by implementing the HAL_SPI_MspInit() API: + (##) Enable the SPIx interface clock + (##) SPI pins configuration + (+++) Enable the clock for the SPI GPIOs + (+++) Configure these SPI pins as alternate function push-pull + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the SPIx interrupt priority + (+++) Enable the NVIC SPI IRQ handle + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive Stream/Channel + (+++) Enable the DMAx clock + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx Stream/Channel + (+++) Associate the initialized hdma_tx(or _rx) handle to the hspi DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx Stream/Channel + + (#) Program the Mode, BidirectionalMode , Data size, Baudrate Prescaler, NSS + management, Clock polarity and phase, FirstBit and CRC configuration in the hspi Init structure. + + (#) Initialize the SPI registers by calling the HAL_SPI_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_SPI_MspInit() API. + [..] + Circular mode restriction: + (#) The DMA circular mode cannot be used when the SPI is configured in these modes: + (##) Master 2Lines RxOnly + (##) Master 1Line Rx + (#) The CRC feature is not managed when the DMA circular mode is enabled + (#) When the SPI DMA Pause/Stop features are used, we must use the following APIs + the HAL_SPI_DMAPause()/ HAL_SPI_DMAStop() only under the SPI callbacks + [..] + Master Receive mode restriction: + (#) In Master unidirectional receive-only mode (MSTR =1, BIDIMODE=0, RXONLY=1) or + bidirectional receive mode (MSTR=1, BIDIMODE=1, BIDIOE=0), to ensure that the SPI + does not initiate a new transfer the following procedure has to be respected: + (##) HAL_SPI_DeInit() + (##) HAL_SPI_Init() + [..] + Callback registration: + + (#) The compilation flag USE_HAL_SPI_REGISTER_CALLBACKS when set to 1U + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_SPI_RegisterCallback() to register an interrupt callback. + + Function HAL_SPI_RegisterCallback() allows to register following callbacks: + (++) TxCpltCallback : SPI Tx Completed callback + (++) RxCpltCallback : SPI Rx Completed callback + (++) TxRxCpltCallback : SPI TxRx Completed callback + (++) TxHalfCpltCallback : SPI Tx Half Completed callback + (++) RxHalfCpltCallback : SPI Rx Half Completed callback + (++) TxRxHalfCpltCallback : SPI TxRx Half Completed callback + (++) ErrorCallback : SPI Error callback + (++) AbortCpltCallback : SPI Abort callback + (++) MspInitCallback : SPI Msp Init callback + (++) MspDeInitCallback : SPI Msp DeInit callback + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + + (#) Use function HAL_SPI_UnRegisterCallback to reset a callback to the default + weak function. + HAL_SPI_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (++) TxCpltCallback : SPI Tx Completed callback + (++) RxCpltCallback : SPI Rx Completed callback + (++) TxRxCpltCallback : SPI TxRx Completed callback + (++) TxHalfCpltCallback : SPI Tx Half Completed callback + (++) RxHalfCpltCallback : SPI Rx Half Completed callback + (++) TxRxHalfCpltCallback : SPI TxRx Half Completed callback + (++) ErrorCallback : SPI Error callback + (++) AbortCpltCallback : SPI Abort callback + (++) MspInitCallback : SPI Msp Init callback + (++) MspDeInitCallback : SPI Msp DeInit callback + + [..] + By default, after the HAL_SPI_Init() and when the state is HAL_SPI_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_SPI_MasterTxCpltCallback(), HAL_SPI_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_SPI_Init()/ HAL_SPI_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_SPI_Init()/ HAL_SPI_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + + [..] + Callbacks can be registered/unregistered in HAL_SPI_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_SPI_STATE_READY or HAL_SPI_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_SPI_RegisterCallback() before calling HAL_SPI_DeInit() + or HAL_SPI_Init() function. + + [..] + When the compilation define USE_HAL_PPP_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + [..] + Using the HAL it is not possible to reach all supported SPI frequency with the different SPI Modes, + the following table resume the max SPI frequency reached with data size 8bits/16bits, + according to frequency of the APBx Peripheral Clock (fPCLK) used by the SPI instance. + + @endverbatim + + Additional table : + + DataSize = SPI_DATASIZE_8BIT: + +----------------------------------------------------------------------------------------------+ + | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line | + | Process | Transfer mode |---------------------|----------------------|----------------------| + | | | Master | Slave | Master | Slave | Master | Slave | + |==============================================================================================| + | T | Polling | Fpclk/4 | Fpclk/8 | NA | NA | NA | NA | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | / | Interrupt | Fpclk/4 | Fpclk/16 | NA | NA | NA | NA | + | R |----------------|----------|----------|-----------|----------|-----------|----------| + | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/4 | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | R | Interrupt | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | Fpclk/4 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/4 | Fpclk/2 | Fpclk/2 | Fpclk/16 | Fpclk/2 | Fpclk/16 | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/8 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | T | Interrupt | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/16 | Fpclk/8 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/16 | + +----------------------------------------------------------------------------------------------+ + + DataSize = SPI_DATASIZE_16BIT: + +----------------------------------------------------------------------------------------------+ + | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line | + | Process | Transfer mode |---------------------|----------------------|----------------------| + | | | Master | Slave | Master | Slave | Master | Slave | + |==============================================================================================| + | T | Polling | Fpclk/4 | Fpclk/8 | NA | NA | NA | NA | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | / | Interrupt | Fpclk/4 | Fpclk/16 | NA | NA | NA | NA | + | R |----------------|----------|----------|-----------|----------|-----------|----------| + | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/4 | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | R | Interrupt | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | Fpclk/4 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/4 | Fpclk/2 | Fpclk/2 | Fpclk/16 | Fpclk/2 | Fpclk/16 | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/8 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | T | Interrupt | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/16 | Fpclk/8 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/16 | + +----------------------------------------------------------------------------------------------+ + @note The max SPI frequency depend on SPI data size (4bits, 5bits,..., 8bits,...15bits, 16bits), + SPI mode(2 Lines fullduplex, 2 lines RxOnly, 1 line TX/RX) and Process mode (Polling, IT, DMA). + @note + (#) TX/RX processes are HAL_SPI_TransmitReceive(), HAL_SPI_TransmitReceive_IT() and HAL_SPI_TransmitReceive_DMA() + (#) RX processes are HAL_SPI_Receive(), HAL_SPI_Receive_IT() and HAL_SPI_Receive_DMA() + (#) TX processes are HAL_SPI_Transmit(), HAL_SPI_Transmit_IT() and HAL_SPI_Transmit_DMA() + + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup SPI SPI + * @brief SPI HAL module driver + * @{ + */ +#ifdef HAL_SPI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup SPI_Private_Constants SPI Private Constants + * @{ + */ +#define SPI_DEFAULT_TIMEOUT 100U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup SPI_Private_Functions SPI Private Functions + * @{ + */ +static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAError(DMA_HandleTypeDef *hdma); +static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus State, + uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef SPI_WaitFifoStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Fifo, uint32_t State, + uint32_t Timeout, uint32_t Tickstart); +static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +#if (USE_SPI_CRC != 0U) +static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi); +static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi); +#endif /* USE_SPI_CRC */ +static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi); +static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SPI_Exported_Functions SPI Exported Functions + * @{ + */ + +/** @defgroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + de-initialize the SPIx peripheral: + + (+) User must implement HAL_SPI_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_SPI_Init() to configure the selected device with + the selected configuration: + (++) Mode + (++) Direction + (++) Data Size + (++) Clock Polarity and Phase + (++) NSS Management + (++) BaudRate Prescaler + (++) FirstBit + (++) TIMode + (++) CRC Calculation + (++) CRC Polynomial if CRC enabled + (++) CRC Length, used only with Data8 and Data16 + (++) FIFO reception threshold + + (+) Call the function HAL_SPI_DeInit() to restore the default configuration + of the selected SPIx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the SPI according to the specified parameters + * in the SPI_InitTypeDef and initialize the associated handle. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi) +{ + uint32_t frxth; + + /* Check the SPI handle allocation */ + if (hspi == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance)); + assert_param(IS_SPI_MODE(hspi->Init.Mode)); + assert_param(IS_SPI_DIRECTION(hspi->Init.Direction)); + assert_param(IS_SPI_DATASIZE(hspi->Init.DataSize)); + assert_param(IS_SPI_NSS(hspi->Init.NSS)); + assert_param(IS_SPI_NSSP(hspi->Init.NSSPMode)); + assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); + assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit)); + assert_param(IS_SPI_TIMODE(hspi->Init.TIMode)); + if (hspi->Init.TIMode == SPI_TIMODE_DISABLE) + { + assert_param(IS_SPI_CPOL(hspi->Init.CLKPolarity)); + assert_param(IS_SPI_CPHA(hspi->Init.CLKPhase)); + + if (hspi->Init.Mode == SPI_MODE_MASTER) + { + assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); + } + else + { + /* Baudrate prescaler not use in Motoraola Slave mode. force to default value */ + hspi->Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2; + } + } + else + { + assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); + + /* Force polarity and phase to TI protocaol requirements */ + hspi->Init.CLKPolarity = SPI_POLARITY_LOW; + hspi->Init.CLKPhase = SPI_PHASE_1EDGE; + } +#if (USE_SPI_CRC != 0U) + assert_param(IS_SPI_CRC_CALCULATION(hspi->Init.CRCCalculation)); + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + assert_param(IS_SPI_CRC_POLYNOMIAL(hspi->Init.CRCPolynomial)); + assert_param(IS_SPI_CRC_LENGTH(hspi->Init.CRCLength)); + } +#else + hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; +#endif /* USE_SPI_CRC */ + + if (hspi->State == HAL_SPI_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hspi->Lock = HAL_UNLOCKED; + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + /* Init the SPI Callback settings */ + hspi->TxCpltCallback = HAL_SPI_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hspi->RxCpltCallback = HAL_SPI_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hspi->TxRxCpltCallback = HAL_SPI_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + hspi->TxHalfCpltCallback = HAL_SPI_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + hspi->RxHalfCpltCallback = HAL_SPI_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ + hspi->ErrorCallback = HAL_SPI_ErrorCallback; /* Legacy weak ErrorCallback */ + hspi->AbortCpltCallback = HAL_SPI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + + if (hspi->MspInitCallback == NULL) + { + hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + hspi->MspInitCallback(hspi); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + HAL_SPI_MspInit(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + + hspi->State = HAL_SPI_STATE_BUSY; + + /* Disable the selected SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Align by default the rs fifo threshold on the data size */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + frxth = SPI_RXFIFO_THRESHOLD_HF; + } + else + { + frxth = SPI_RXFIFO_THRESHOLD_QF; + } + + /* CRC calculation is valid only for 16Bit and 8 Bit */ + if ((hspi->Init.DataSize != SPI_DATASIZE_16BIT) && (hspi->Init.DataSize != SPI_DATASIZE_8BIT)) + { + /* CRC must be disabled */ + hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; + } + + /*----------------------- SPIx CR1 & CR2 Configuration ---------------------*/ + /* Configure : SPI Mode, Communication Mode, Clock polarity and phase, NSS management, + Communication speed, First bit and CRC calculation state */ + WRITE_REG(hspi->Instance->CR1, ((hspi->Init.Mode & (SPI_CR1_MSTR | SPI_CR1_SSI)) | + (hspi->Init.Direction & (SPI_CR1_RXONLY | SPI_CR1_BIDIMODE)) | + (hspi->Init.CLKPolarity & SPI_CR1_CPOL) | + (hspi->Init.CLKPhase & SPI_CR1_CPHA) | + (hspi->Init.NSS & SPI_CR1_SSM) | + (hspi->Init.BaudRatePrescaler & SPI_CR1_BR_Msk) | + (hspi->Init.FirstBit & SPI_CR1_LSBFIRST) | + (hspi->Init.CRCCalculation & SPI_CR1_CRCEN))); +#if (USE_SPI_CRC != 0U) + /*---------------------------- SPIx CRCL Configuration -------------------*/ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Align the CRC Length on the data size */ + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_DATASIZE) + { + /* CRC Length aligned on the data size : value set by default */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + hspi->Init.CRCLength = SPI_CRC_LENGTH_16BIT; + } + else + { + hspi->Init.CRCLength = SPI_CRC_LENGTH_8BIT; + } + } + + /* Configure : CRC Length */ + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCL); + } + } +#endif /* USE_SPI_CRC */ + + /* Configure : NSS management, TI Mode, NSS Pulse, Data size and Rx Fifo threshold */ + WRITE_REG(hspi->Instance->CR2, (((hspi->Init.NSS >> 16U) & SPI_CR2_SSOE) | + (hspi->Init.TIMode & SPI_CR2_FRF) | + (hspi->Init.NSSPMode & SPI_CR2_NSSP) | + (hspi->Init.DataSize & SPI_CR2_DS_Msk) | + (frxth & SPI_CR2_FRXTH))); + +#if (USE_SPI_CRC != 0U) + /*---------------------------- SPIx CRCPOLY Configuration ------------------*/ + /* Configure : CRC Polynomial */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + WRITE_REG(hspi->Instance->CRCPR, (hspi->Init.CRCPolynomial & SPI_CRCPR_CRCPOLY_Msk)); + } +#endif /* USE_SPI_CRC */ + +#if defined(SPI_I2SCFGR_I2SMOD) + /* Activate the SPI mode (Make sure that I2SMOD bit in I2SCFGR register is reset) */ + CLEAR_BIT(hspi->Instance->I2SCFGR, SPI_I2SCFGR_I2SMOD); +#endif /* SPI_I2SCFGR_I2SMOD */ + + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->State = HAL_SPI_STATE_READY; + + return HAL_OK; +} + +/** + * @brief De-Initialize the SPI peripheral. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi) +{ + /* Check the SPI handle allocation */ + if (hspi == NULL) + { + return HAL_ERROR; + } + + /* Check SPI Instance parameter */ + assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance)); + + hspi->State = HAL_SPI_STATE_BUSY; + + /* Disable the SPI Peripheral Clock */ + __HAL_SPI_DISABLE(hspi); + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + if (hspi->MspDeInitCallback == NULL) + { + hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + hspi->MspDeInitCallback(hspi); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + HAL_SPI_MspDeInit(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->State = HAL_SPI_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief Initialize the SPI MSP. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_MspInit should be implemented in the user file + */ +} + +/** + * @brief De-Initialize the SPI MSP. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_MspDeInit should be implemented in the user file + */ +} + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User SPI Callback + * To be used instead of the weak predefined callback + * @param hspi Pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI. + * @param CallbackID ID of the callback to be registered + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, + pSPI_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hspi->ErrorCode |= HAL_SPI_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hspi); + + if (HAL_SPI_STATE_READY == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_TX_COMPLETE_CB_ID : + hspi->TxCpltCallback = pCallback; + break; + + case HAL_SPI_RX_COMPLETE_CB_ID : + hspi->RxCpltCallback = pCallback; + break; + + case HAL_SPI_TX_RX_COMPLETE_CB_ID : + hspi->TxRxCpltCallback = pCallback; + break; + + case HAL_SPI_TX_HALF_COMPLETE_CB_ID : + hspi->TxHalfCpltCallback = pCallback; + break; + + case HAL_SPI_RX_HALF_COMPLETE_CB_ID : + hspi->RxHalfCpltCallback = pCallback; + break; + + case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID : + hspi->TxRxHalfCpltCallback = pCallback; + break; + + case HAL_SPI_ERROR_CB_ID : + hspi->ErrorCallback = pCallback; + break; + + case HAL_SPI_ABORT_CB_ID : + hspi->AbortCpltCallback = pCallback; + break; + + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = pCallback; + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SPI_STATE_RESET == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = pCallback; + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hspi); + return status; +} + +/** + * @brief Unregister an SPI Callback + * SPI callback is redirected to the weak predefined callback + * @param hspi Pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI. + * @param CallbackID ID of the callback to be unregistered + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hspi); + + if (HAL_SPI_STATE_READY == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_TX_COMPLETE_CB_ID : + hspi->TxCpltCallback = HAL_SPI_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_SPI_RX_COMPLETE_CB_ID : + hspi->RxCpltCallback = HAL_SPI_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_SPI_TX_RX_COMPLETE_CB_ID : + hspi->TxRxCpltCallback = HAL_SPI_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + break; + + case HAL_SPI_TX_HALF_COMPLETE_CB_ID : + hspi->TxHalfCpltCallback = HAL_SPI_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_SPI_RX_HALF_COMPLETE_CB_ID : + hspi->RxHalfCpltCallback = HAL_SPI_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID : + hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ + break; + + case HAL_SPI_ERROR_CB_ID : + hspi->ErrorCallback = HAL_SPI_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_SPI_ABORT_CB_ID : + hspi->AbortCpltCallback = HAL_SPI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SPI_STATE_RESET == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hspi); + return status; +} +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SPI_Exported_Functions_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SPI + data transfers. + + [..] The SPI supports master and slave mode : + + (#) There are two modes of transfer: + (++) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode: The communication is performed using Interrupts + or DMA, These APIs return the HAL status. + The end of the data processing will be indicated through the + dedicated SPI IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_SPI_TxCpltCallback(), HAL_SPI_RxCpltCallback() and HAL_SPI_TxRxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_SPI_ErrorCallback()user callback will be executed when a communication error is detected + + (#) APIs provided for these 2 transfer modes (Blocking mode or Non blocking mode using either Interrupt or DMA) + exist for 1Line (simplex) and 2Lines (full duplex) modes. + +@endverbatim + * @{ + */ + +/** + * @brief Transmit an amount of data in blocking mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + HAL_StatusTypeDef errorcode = HAL_OK; + uint16_t initial_TxXferCount; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + initial_TxXferCount = Size; + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->pRxBuffPtr = (uint8_t *)NULL; + hspi->RxXferSize = 0U; + hspi->RxXferCount = 0U; + hspi->TxISR = NULL; + hspi->RxISR = NULL; + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_TX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Transmit data in 16 Bit mode */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + } + /* Transmit data in 16 Bit mode */ + while (hspi->TxXferCount > 0U) + { + /* Wait until TXE flag is set to send data */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + errorcode = HAL_TIMEOUT; + hspi->State = HAL_SPI_STATE_READY; + goto error; + } + } + } + } + /* Transmit data in 8 Bit mode */ + else + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint8_t); + hspi->TxXferCount--; + } + while (hspi->TxXferCount > 0U) + { + /* Wait until TXE flag is set to send data */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) + { + *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint8_t); + hspi->TxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + errorcode = HAL_TIMEOUT; + hspi->State = HAL_SPI_STATE_READY; + goto error; + } + } + } + } +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, Timeout, tickstart) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + + /* Clear overrun flag in 2 Lines communication mode because received is not read */ + if (hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + errorcode = HAL_ERROR; + } + else + { + hspi->State = HAL_SPI_STATE_READY; + } + +error: + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Receive an amount of data in blocking mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be received + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ +#if (USE_SPI_CRC != 0U) + __IO uint32_t tmpreg = 0U; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; +#endif /* USE_SPI_CRC */ + uint32_t tickstart; + HAL_StatusTypeDef errorcode = HAL_OK; + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES)) + { + hspi->State = HAL_SPI_STATE_BUSY_RX; + /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ + return HAL_SPI_TransmitReceive(hspi, pData, pData, Size, Timeout); + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->pTxBuffPtr = (uint8_t *)NULL; + hspi->TxXferSize = 0U; + hspi->TxXferCount = 0U; + hspi->RxISR = NULL; + hspi->TxISR = NULL; + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + /* this is done to handle the CRCNEXT before the latest data */ + hspi->RxXferCount--; + } +#endif /* USE_SPI_CRC */ + + /* Set the Rx Fifo threshold */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + + /* Configure communication direction: 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_RX(hspi); + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Receive data in 8 Bit mode */ + if (hspi->Init.DataSize <= SPI_DATASIZE_8BIT) + { + /* Transfer loop */ + while (hspi->RxXferCount > 0U) + { + /* Check the RXNE flag */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) + { + /* read the received data */ + (* (uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; + hspi->pRxBuffPtr += sizeof(uint8_t); + hspi->RxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + errorcode = HAL_TIMEOUT; + hspi->State = HAL_SPI_STATE_READY; + goto error; + } + } + } + } + else + { + /* Transfer loop */ + while (hspi->RxXferCount > 0U) + { + /* Check the RXNE flag */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + errorcode = HAL_TIMEOUT; + hspi->State = HAL_SPI_STATE_READY; + goto error; + } + } + } + } + +#if (USE_SPI_CRC != 0U) + /* Handle the CRC Transmission */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* freeze the CRC before the latest data */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + + /* Read the latest data */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* the latest data has not been received */ + errorcode = HAL_TIMEOUT; + goto error; + } + + /* Receive last data in 16 Bit mode */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; + } + /* Receive last data in 8 Bit mode */ + else + { + (*(uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; + } + + /* Wait the CRC data */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + errorcode = HAL_TIMEOUT; + goto error; + } + + /* Read CRC to Flush DR and RXNE flag */ + if (hspi->Init.DataSize == SPI_DATASIZE_16BIT) + { + /* Read 16bit CRC */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + } + else + { + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + if ((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)) + { + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + errorcode = HAL_TIMEOUT; + goto error; + } + /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + } + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTransaction(hspi, Timeout, tickstart) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } +#endif /* USE_SPI_CRC */ + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + errorcode = HAL_ERROR; + } + else + { + hspi->State = HAL_SPI_STATE_READY; + } + +error : + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Transmit and Receive an amount of data in blocking mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData pointer to transmission data buffer + * @param pRxData pointer to reception data buffer + * @param Size amount of data to be sent and received + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, + uint32_t Timeout) +{ + uint16_t initial_TxXferCount; + uint32_t tmp_mode; + HAL_SPI_StateTypeDef tmp_state; + uint32_t tickstart; +#if (USE_SPI_CRC != 0U) + __IO uint32_t tmpreg = 0U; + uint32_t spi_cr1; + uint32_t spi_cr2; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; +#endif /* USE_SPI_CRC */ + + /* Variable used to alternate Rx and Tx during transfer */ + uint32_t txallowed = 1U; + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* Init temporary variables */ + tmp_state = hspi->State; + tmp_mode = hspi->Init.Mode; + initial_TxXferCount = Size; +#if (USE_SPI_CRC != 0U) + spi_cr1 = READ_REG(hspi->Instance->CR1); + spi_cr2 = READ_REG(hspi->Instance->CR2); +#endif /* USE_SPI_CRC */ + + if (!((tmp_state == HAL_SPI_STATE_READY) || \ + ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX)))) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ + if (hspi->State != HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + } + + /* Set the transaction information */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pRxData; + hspi->RxXferCount = Size; + hspi->RxXferSize = Size; + hspi->pTxBuffPtr = (uint8_t *)pTxData; + hspi->TxXferCount = Size; + hspi->TxXferSize = Size; + + /*Init field not used in handle to zero */ + hspi->RxISR = NULL; + hspi->TxISR = NULL; + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Set the Rx Fifo threshold */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set fiforxthreshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set fiforxthreshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Transmit and Receive data in 16 Bit mode */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ + if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); + } + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + } + while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U)) + { + /* Check TXE flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) && (hspi->TxXferCount > 0U) && (txallowed == 1U)) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + /* Next Data is a reception (Rx). Tx not allowed */ + txallowed = 0U; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ + if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); + } + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + } + + /* Check RXNE flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) && (hspi->RxXferCount > 0U)) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + /* Next Data is a Transmission (Tx). Tx is allowed */ + txallowed = 1U; + } + if (((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) + { + errorcode = HAL_TIMEOUT; + hspi->State = HAL_SPI_STATE_READY; + goto error; + } + } + } + /* Transmit and Receive data in 8 Bit mode */ + else + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint8_t); + hspi->TxXferCount--; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ + if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); + } + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + } + while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U)) + { + /* Check TXE flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) && (hspi->TxXferCount > 0U) && (txallowed == 1U)) + { + *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + /* Next Data is a reception (Rx). Tx not allowed */ + txallowed = 0U; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ + if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); + } + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + } + + /* Wait until RXNE flag is reset */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) && (hspi->RxXferCount > 0U)) + { + (*(uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; + hspi->pRxBuffPtr++; + hspi->RxXferCount--; + /* Next Data is a Transmission (Tx). Tx is allowed */ + txallowed = 1U; + } + if ((((HAL_GetTick() - tickstart) >= Timeout) && ((Timeout != HAL_MAX_DELAY))) || (Timeout == 0U)) + { + errorcode = HAL_TIMEOUT; + hspi->State = HAL_SPI_STATE_READY; + goto error; + } + } + } + +#if (USE_SPI_CRC != 0U) + /* Read CRC from DR to close CRC calculation process */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Wait until TXE flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + errorcode = HAL_TIMEOUT; + goto error; + } + /* Read CRC */ + if (hspi->Init.DataSize == SPI_DATASIZE_16BIT) + { + /* Read 16bit CRC */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + } + else + { + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT) + { + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + errorcode = HAL_TIMEOUT; + goto error; + } + /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + } + } + + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + /* Clear CRC Flag */ + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + + errorcode = HAL_ERROR; + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, Timeout, tickstart) != HAL_OK) + { + errorcode = HAL_ERROR; + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + errorcode = HAL_ERROR; + } + else + { + hspi->State = HAL_SPI_STATE_READY; + } + +error : + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with Interrupt. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); + + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->pRxBuffPtr = (uint8_t *)NULL; + hspi->RxXferSize = 0U; + hspi->RxXferCount = 0U; + hspi->RxISR = NULL; + + /* Set the function for IT treatment */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + hspi->TxISR = SPI_TxISR_16BIT; + } + else + { + hspi->TxISR = SPI_TxISR_8BIT; + } + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_TX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + /* Enable TXE and ERR interrupt */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR)); + +error : + return errorcode; +} + +/** + * @brief Receive an amount of data in non-blocking mode with Interrupt. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) + { + hspi->State = HAL_SPI_STATE_BUSY_RX; + /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ + return HAL_SPI_TransmitReceive_IT(hspi, pData, pData, Size); + } + + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->pTxBuffPtr = (uint8_t *)NULL; + hspi->TxXferSize = 0U; + hspi->TxXferCount = 0U; + hspi->TxISR = NULL; + + /* Check the data size to adapt Rx threshold and the set the function for IT treatment */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set RX Fifo threshold according the reception data length: 16 bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + hspi->RxISR = SPI_RxISR_16BIT; + } + else + { + /* Set RX Fifo threshold according the reception data length: 8 bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + hspi->RxISR = SPI_RxISR_8BIT; + } + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_RX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->CRCSize = 1U; + if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)) + { + hspi->CRCSize = 2U; + } + SPI_RESET_CRC(hspi); + } + else + { + hspi->CRCSize = 0U; + } +#endif /* USE_SPI_CRC */ + + /* Note : The SPI must be enabled after unlocking current process + to avoid the risk of SPI interrupt handle execution before current + process unlock */ + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + /* Enable RXNE and ERR interrupt */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + +error : + return errorcode; +} + +/** + * @brief Transmit and Receive an amount of data in non-blocking mode with Interrupt. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData pointer to transmission data buffer + * @param pRxData pointer to reception data buffer + * @param Size amount of data to be sent and received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size) +{ + uint32_t tmp_mode; + HAL_SPI_StateTypeDef tmp_state; + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Init temporary variables */ + tmp_state = hspi->State; + tmp_mode = hspi->Init.Mode; + + if (!((tmp_state == HAL_SPI_STATE_READY) || \ + ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX)))) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Process locked */ + __HAL_LOCK(hspi); + + /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ + if (hspi->State != HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + } + + /* Set the transaction information */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pTxData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + hspi->pRxBuffPtr = (uint8_t *)pRxData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /* Set the function for IT treatment */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + hspi->RxISR = SPI_2linesRxISR_16BIT; + hspi->TxISR = SPI_2linesTxISR_16BIT; + } + else + { + hspi->RxISR = SPI_2linesRxISR_8BIT; + hspi->TxISR = SPI_2linesTxISR_8BIT; + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->CRCSize = 1U; + if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)) + { + hspi->CRCSize = 2U; + } + SPI_RESET_CRC(hspi); + } + else + { + hspi->CRCSize = 0U; + } +#endif /* USE_SPI_CRC */ + + /* Check if packing mode is enabled and if there is more than 2 data to receive */ + if ((hspi->Init.DataSize > SPI_DATASIZE_8BIT) || (Size >= 2U)) + { + /* Set RX Fifo threshold according the reception data length: 16 bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8 bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + /* Enable TXE, RXNE and ERR interrupt */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); + +error : + return errorcode; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with DMA. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check tx dma handle */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); + + /* Process Locked */ + __HAL_LOCK(hspi); + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->pRxBuffPtr = (uint8_t *)NULL; + hspi->TxISR = NULL; + hspi->RxISR = NULL; + hspi->RxXferSize = 0U; + hspi->RxXferCount = 0U; + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_TX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Set the SPI TxDMA Half transfer complete callback */ + hspi->hdmatx->XferHalfCpltCallback = SPI_DMAHalfTransmitCplt; + + /* Set the SPI TxDMA transfer complete callback */ + hspi->hdmatx->XferCpltCallback = SPI_DMATransmitCplt; + + /* Set the DMA error callback */ + hspi->hdmatx->XferErrorCallback = SPI_DMAError; + + /* Set the DMA AbortCpltCallback */ + hspi->hdmatx->XferAbortCallback = NULL; + + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + /* Packing mode is enabled only if the DMA setting is HALWORD */ + if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->hdmatx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)) + { + /* Check the even/odd of the data size + crc if enabled */ + if ((hspi->TxXferCount & 0x1U) == 0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = (hspi->TxXferCount >> 1U); + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = (hspi->TxXferCount >> 1U) + 1U; + } + } + + /* Enable the Tx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, + hspi->TxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + + goto error; + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Enable the SPI Error Interrupt Bit */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); + + /* Enable Tx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + +error : + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Receive an amount of data in non-blocking mode with DMA. + * @note In case of MASTER mode and SPI_DIRECTION_2LINES direction, hdmatx shall be defined. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @note When the CRC feature is enabled the pData Length must be Size + 1. + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check rx dma handle */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx)); + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) + { + hspi->State = HAL_SPI_STATE_BUSY_RX; + + /* Check tx dma handle */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); + + /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ + return HAL_SPI_TransmitReceive_DMA(hspi, pData, pData, Size); + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->RxISR = NULL; + hspi->TxISR = NULL; + hspi->TxXferSize = 0U; + hspi->TxXferCount = 0U; + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_RX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if ((hspi->RxXferCount & 0x1U) == 0x0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = hspi->RxXferCount >> 1U; + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = (hspi->RxXferCount >> 1U) + 1U; + } + } + } + + /* Set the SPI RxDMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt; + + /* Set the SPI Rx DMA transfer complete callback */ + hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt; + + /* Set the DMA error callback */ + hspi->hdmarx->XferErrorCallback = SPI_DMAError; + + /* Set the DMA AbortCpltCallback */ + hspi->hdmarx->XferAbortCallback = NULL; + + /* Enable the Rx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, + hspi->RxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + + goto error; + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Enable the SPI Error Interrupt Bit */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); + + /* Enable Rx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + +error: + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Transmit and Receive an amount of data in non-blocking mode with DMA. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData pointer to transmission data buffer + * @param pRxData pointer to reception data buffer + * @note When the CRC feature is enabled the pRxData Length must be Size + 1 + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size) +{ + uint32_t tmp_mode; + HAL_SPI_StateTypeDef tmp_state; + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check rx & tx dma handles */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx)); + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Process locked */ + __HAL_LOCK(hspi); + + /* Init temporary variables */ + tmp_state = hspi->State; + tmp_mode = hspi->Init.Mode; + + if (!((tmp_state == HAL_SPI_STATE_READY) || + ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX)))) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ + if (hspi->State != HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + } + + /* Set the transaction information */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pTxData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + hspi->pRxBuffPtr = (uint8_t *)pRxData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->RxISR = NULL; + hspi->TxISR = NULL; + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Reset the threshold bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX | SPI_CR2_LDMARX); + + /* The packing mode management is enabled by the DMA settings according the spi data size */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set fiforxthreshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if (hspi->hdmatx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) + { + if ((hspi->TxXferSize & 0x1U) == 0x0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = hspi->TxXferCount >> 1U; + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = (hspi->TxXferCount >> 1U) + 1U; + } + } + + if (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if ((hspi->RxXferCount & 0x1U) == 0x0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = hspi->RxXferCount >> 1U; + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = (hspi->RxXferCount >> 1U) + 1U; + } + } + } + + /* Check if we are in Rx only or in Rx/Tx Mode and configure the DMA transfer complete callback */ + if (hspi->State == HAL_SPI_STATE_BUSY_RX) + { + /* Set the SPI Rx DMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt; + hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt; + } + else + { + /* Set the SPI Tx/Rx DMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfTransmitReceiveCplt; + hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt; + } + + /* Set the DMA error callback */ + hspi->hdmarx->XferErrorCallback = SPI_DMAError; + + /* Set the DMA AbortCpltCallback */ + hspi->hdmarx->XferAbortCallback = NULL; + + /* Enable the Rx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, + hspi->RxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + + goto error; + } + + /* Enable Rx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + + /* Set the SPI Tx DMA transfer complete callback as NULL because the communication closing + is performed in DMA reception complete callback */ + hspi->hdmatx->XferHalfCpltCallback = NULL; + hspi->hdmatx->XferCpltCallback = NULL; + hspi->hdmatx->XferErrorCallback = NULL; + hspi->hdmatx->XferAbortCallback = NULL; + + /* Enable the Tx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, + hspi->TxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + + goto error; + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + /* Enable the SPI Error Interrupt Bit */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); + + /* Enable Tx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + +error : + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Abort ongoing transfer (blocking mode). + * @param hspi SPI handle. + * @note This procedure could be used for aborting any ongoing transfer (Tx and Rx), + * started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SPI Interrupts (depending of transfer direction) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi) +{ + HAL_StatusTypeDef errorcode; + __IO uint32_t count; + __IO uint32_t resetcount; + + /* Initialized local variable */ + errorcode = HAL_OK; + resetcount = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + count = resetcount; + + /* Clear ERRIE interrupt to avoid error interrupts generation during Abort procedure */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE); + + /* Disable TXEIE, RXNEIE and ERRIE(mode fault event, overrun error, TI frame error) interrupts */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)) + { + hspi->TxISR = SPI_AbortTx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) + { + hspi->RxISR = SPI_AbortRx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + /* Disable the SPI DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) + { + /* Abort the SPI DMA Tx Stream/Channel : use blocking DMA Abort API (no callback) */ + if (hspi->hdmatx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_AbortCpltCallback() at end of DMA abort procedure */ + hspi->hdmatx->XferAbortCallback = NULL; + + /* Abort DMA Tx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort(hspi->hdmatx) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN)); + + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + } + } + + /* Disable the SPI DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) + { + /* Abort the SPI DMA Rx Stream/Channel : use blocking DMA Abort API (no callback) */ + if (hspi->hdmarx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_AbortCpltCallback() at end of DMA abort procedure */ + hspi->hdmarx->XferAbortCallback = NULL; + + /* Abort DMA Rx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort(hspi->hdmarx) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable Rx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXDMAEN)); + } + } + /* Reset Tx and Rx transfer counters */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check error during Abort procedure */ + if (hspi->ErrorCode == HAL_SPI_ERROR_ABORT) + { + /* return HAL_Error in case of error during Abort procedure */ + errorcode = HAL_ERROR; + } + else + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->state to ready */ + hspi->State = HAL_SPI_STATE_READY; + + return errorcode; +} + +/** + * @brief Abort ongoing transfer (Interrupt mode). + * @param hspi SPI handle. + * @note This procedure could be used for aborting any ongoing transfer (Tx and Rx), + * started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SPI Interrupts (depending of transfer direction) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi) +{ + HAL_StatusTypeDef errorcode; + uint32_t abortcplt ; + __IO uint32_t count; + __IO uint32_t resetcount; + + /* Initialized local variable */ + errorcode = HAL_OK; + abortcplt = 1U; + resetcount = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + count = resetcount; + + /* Clear ERRIE interrupt to avoid error interrupts generation during Abort procedure */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE); + + /* Change Rx and Tx Irq Handler to Disable TXEIE, RXNEIE and ERRIE interrupts */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)) + { + hspi->TxISR = SPI_AbortTx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) + { + hspi->RxISR = SPI_AbortRx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + /* If DMA Tx and/or DMA Rx Handles are associated to SPI Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (hspi->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) + { + hspi->hdmatx->XferAbortCallback = SPI_DMATxAbortCallback; + } + else + { + hspi->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (hspi->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) + { + hspi->hdmarx->XferAbortCallback = SPI_DMARxAbortCallback; + } + else + { + hspi->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the SPI DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) + { + /* Abort the SPI DMA Tx Stream/Channel */ + if (hspi->hdmatx != NULL) + { + /* Abort DMA Tx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort_IT(hspi->hdmatx) != HAL_OK) + { + hspi->hdmatx->XferAbortCallback = NULL; + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + else + { + abortcplt = 0U; + } + } + } + /* Disable the SPI DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) + { + /* Abort the SPI DMA Rx Stream/Channel */ + if (hspi->hdmarx != NULL) + { + /* Abort DMA Rx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort_IT(hspi->hdmarx) != HAL_OK) + { + hspi->hdmarx->XferAbortCallback = NULL; + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + else + { + abortcplt = 0U; + } + } + } + + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check error during Abort procedure */ + if (hspi->ErrorCode == HAL_SPI_ERROR_ABORT) + { + /* return HAL_Error in case of error during Abort procedure */ + errorcode = HAL_ERROR; + } + else + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->AbortCpltCallback(hspi); +#else + HAL_SPI_AbortCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + + return errorcode; +} + +/** + * @brief Pause the DMA Transfer. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi) +{ + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Disable the SPI DMA Tx & Rx requests */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi) +{ + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Enable the SPI DMA Tx & Rx requests */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + /* The Lock is not implemented on this API to allow the user application + to call the HAL SPI API under callbacks HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback(): + when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated + and the correspond call back is executed HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback() + */ + + /* Abort the SPI DMA tx Stream/Channel */ + if (hspi->hdmatx != NULL) + { + if (HAL_OK != HAL_DMA_Abort(hspi->hdmatx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + /* Abort the SPI DMA rx Stream/Channel */ + if (hspi->hdmarx != NULL) + { + if (HAL_OK != HAL_DMA_Abort(hspi->hdmarx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + + /* Disable the SPI DMA Tx & Rx requests */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + hspi->State = HAL_SPI_STATE_READY; + return errorcode; +} + +/** + * @brief Handle SPI interrupt request. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval None + */ +void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi) +{ + uint32_t itsource = hspi->Instance->CR2; + uint32_t itflag = hspi->Instance->SR; + + /* SPI in mode Receiver ----------------------------------------------------*/ + if ((SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) == RESET) && + (SPI_CHECK_FLAG(itflag, SPI_FLAG_RXNE) != RESET) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_RXNE) != RESET)) + { + hspi->RxISR(hspi); + return; + } + + /* SPI in mode Transmitter -------------------------------------------------*/ + if ((SPI_CHECK_FLAG(itflag, SPI_FLAG_TXE) != RESET) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_TXE) != RESET)) + { + hspi->TxISR(hspi); + return; + } + + /* SPI in Error Treatment --------------------------------------------------*/ + if (((SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) || (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET) + || (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET)) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_ERR) != RESET)) + { + /* SPI Overrun error interrupt occurred ----------------------------------*/ + if (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET) + { + if (hspi->State != HAL_SPI_STATE_BUSY_TX) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_OVR); + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + else + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + return; + } + } + + /* SPI Mode Fault error interrupt occurred -------------------------------*/ + if (SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_MODF); + __HAL_SPI_CLEAR_MODFFLAG(hspi); + } + + /* SPI Frame error interrupt occurred ------------------------------------*/ + if (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FRE); + __HAL_SPI_CLEAR_FREFLAG(hspi); + } + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Disable all interrupts */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE | SPI_IT_TXE | SPI_IT_ERR); + + hspi->State = HAL_SPI_STATE_READY; + /* Disable the SPI DMA requests if enabled */ + if ((HAL_IS_BIT_SET(itsource, SPI_CR2_TXDMAEN)) || (HAL_IS_BIT_SET(itsource, SPI_CR2_RXDMAEN))) + { + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN)); + + /* Abort the SPI DMA Rx channel */ + if (hspi->hdmarx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */ + hspi->hdmarx->XferAbortCallback = SPI_DMAAbortOnError; + if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmarx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + } + } + /* Abort the SPI DMA Tx channel */ + if (hspi->hdmatx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */ + hspi->hdmatx->XferAbortCallback = SPI_DMAAbortOnError; + if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmatx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + } + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + } + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_RxCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Tx and Rx Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxRxCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxHalfCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_RxHalfCpltCallback() should be implemented in the user file + */ +} + +/** + * @brief Tx and Rx Half Transfer callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxRxHalfCpltCallback() should be implemented in the user file + */ +} + +/** + * @brief SPI error callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_ErrorCallback should be implemented in the user file + */ + /* NOTE : The ErrorCode parameter in the hspi handle is updated by the SPI processes + and user can use HAL_SPI_GetError() API to check the latest error occurred + */ +} + +/** + * @brief SPI Abort Complete callback. + * @param hspi SPI handle. + * @retval None + */ +__weak void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup SPI_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief SPI control functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the SPI. + (+) HAL_SPI_GetState() API can be helpful to check in run-time the state of the SPI peripheral + (+) HAL_SPI_GetError() check in run-time Errors occurring during communication +@endverbatim + * @{ + */ + +/** + * @brief Return the SPI handle state. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval SPI state + */ +HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi) +{ + /* Return SPI handle state */ + return hspi->State; +} + +/** + * @brief Return the SPI error code. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval SPI error code in bitmap format + */ +uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi) +{ + /* Return SPI ErrorCode */ + return hspi->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup SPI_Private_Functions + * @brief Private functions + * @{ + */ + +/** + * @brief DMA SPI transmit process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tickstart; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* DMA Normal Mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) + { + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Clear overrun flag in 2 Lines communication mode because received data is not read */ + if (hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + hspi->TxXferCount = 0U; + hspi->State = HAL_SPI_STATE_READY; + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + return; + } + } + /* Call user Tx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxCpltCallback(hspi); +#else + HAL_SPI_TxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI receive process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tickstart; +#if (USE_SPI_CRC != 0U) + __IO uint32_t tmpreg = 0U; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; +#endif /* USE_SPI_CRC */ + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* DMA Normal Mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) + { + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + +#if (USE_SPI_CRC != 0U) + /* CRC handling */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Wait until RXNE flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Read CRC */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Read 16bit CRC */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + } + else + { + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT) + { + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + } + } +#endif /* USE_SPI_CRC */ + + /* Check if we are in Master RX 2 line mode */ + if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) + { + /* Disable Rx/Tx DMA Request (done by default to handle the case master rx direction 2 lines) */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + } + else + { + /* Normal case */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + } + + /* Check the end of the transaction */ + if (SPI_EndRxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + + hspi->RxXferCount = 0U; + hspi->State = HAL_SPI_STATE_READY; + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } +#endif /* USE_SPI_CRC */ + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + return; + } + } + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxCpltCallback(hspi); +#else + HAL_SPI_RxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI transmit receive process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tickstart; +#if (USE_SPI_CRC != 0U) + __IO uint32_t tmpreg = 0U; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; +#endif /* USE_SPI_CRC */ + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* DMA Normal Mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) + { + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + +#if (USE_SPI_CRC != 0U) + /* CRC handling */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + if ((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_8BIT)) + { + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_QUARTER_FULL, SPI_DEFAULT_TIMEOUT, + tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + else + { + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_HALF_FULL, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Read CRC to Flush DR and RXNE flag */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + } + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Disable Rx/Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + hspi->TxXferCount = 0U; + hspi->RxXferCount = 0U; + hspi->State = HAL_SPI_STATE_READY; + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } +#endif /* USE_SPI_CRC */ + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + return; + } + } + /* Call user TxRx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxRxCpltCallback(hspi); +#else + HAL_SPI_TxRxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI half transmit process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user Tx half complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxHalfCpltCallback(hspi); +#else + HAL_SPI_TxHalfCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI half receive process complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user Rx half complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxHalfCpltCallback(hspi); +#else + HAL_SPI_RxHalfCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI half transmit receive process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user TxRx half complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxRxHalfCpltCallback(hspi); +#else + HAL_SPI_TxRxHalfCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI communication error callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAError(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Stop the disable DMA transfer on SPI side */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + hspi->State = HAL_SPI_STATE_READY; + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + hspi->hdmatx->XferAbortCallback = NULL; + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Check if an Abort process is still ongoing */ + if (hspi->hdmarx != NULL) + { + if (hspi->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA Stream/Channel are aborted, call user Abort Complete callback */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check no error during Abort procedure */ + if (hspi->ErrorCode != HAL_SPI_ERROR_ABORT) + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->AbortCpltCallback(hspi); +#else + HAL_SPI_AbortCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + hspi->hdmarx->XferAbortCallback = NULL; + + /* Disable Rx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Check if an Abort process is still ongoing */ + if (hspi->hdmatx != NULL) + { + if (hspi->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA Stream/Channel are aborted, call user Abort Complete callback */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check no error during Abort procedure */ + if (hspi->ErrorCode != HAL_SPI_ERROR_ABORT) + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->AbortCpltCallback(hspi); +#else + HAL_SPI_AbortCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Receive data in packing mode */ + if (hspi->RxXferCount > 1U) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount -= 2U; + if (hspi->RxXferCount == 1U) + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + } + /* Receive data in 8 Bit mode */ + else + { + *hspi->pRxBuffPtr = *((__IO uint8_t *)&hspi->Instance->DR); + hspi->pRxBuffPtr++; + hspi->RxXferCount--; + } + + /* Check end of the reception */ + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + hspi->RxISR = SPI_2linesRxISR_8BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + if (hspi->TxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; + + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC to flush Data Register */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + hspi->CRCSize--; + + /* Check end of the reception */ + if (hspi->CRCSize == 0U) + { + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + if (hspi->TxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Tx 8-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Transmit data in packing Bit mode */ + if (hspi->TxXferCount >= 2U) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount -= 2U; + } + /* Transmit data in 8 Bit mode */ + else + { + *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + } + + /* Check the end of the transmission */ + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Set CRC Next Bit to send CRC */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + + if (hspi->RxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +/** + * @brief Rx 16-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Receive data in 16 Bit mode */ + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->RxISR = SPI_2linesRxISR_16BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable RXNE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE); + + if (hspi->TxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Manage the CRC 16-bit receive for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + __IO uint32_t tmpreg = 0U; + + /* Read 16bit CRC to flush Data Register */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + + /* Disable RXNE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE); + + SPI_CloseRxTx_ISR(hspi); +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Tx 16-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Transmit data in 16 Bit mode */ + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + + /* Enable CRC Transmission */ + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Set CRC Next Bit to send CRC */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + + if (hspi->RxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Manage the CRC 8-bit receive in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; + + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC to flush Data Register */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + hspi->CRCSize--; + + if (hspi->CRCSize == 0U) + { + SPI_CloseRx_ISR(hspi); + } +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Manage the receive 8-bit in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + *hspi->pRxBuffPtr = (*(__IO uint8_t *)&hspi->Instance->DR); + hspi->pRxBuffPtr++; + hspi->RxXferCount--; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->RxISR = SPI_RxISR_8BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + SPI_CloseRx_ISR(hspi); + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Manage the CRC 16-bit receive in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + __IO uint32_t tmpreg = 0U; + + /* Read 16bit CRC to flush Data Register */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + SPI_CloseRx_ISR(hspi); +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Manage the 16-bit receive in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->RxISR = SPI_RxISR_16BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + SPI_CloseRx_ISR(hspi); + } +} + +/** + * @brief Handle the data 8-bit transmit in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Enable CRC Transmission */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + SPI_CloseTx_ISR(hspi); + } +} + +/** + * @brief Handle the data 16-bit transmit in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Transmit data in 16 Bit mode */ + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Enable CRC Transmission */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + SPI_CloseTx_ISR(hspi); + } +} + +/** + * @brief Handle SPI Communication Timeout. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param Flag SPI flag to check + * @param State flag state to check + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus State, + uint32_t Timeout, uint32_t Tickstart) +{ + __IO uint32_t count; + uint32_t tmp_timeout; + uint32_t tmp_tickstart; + + /* Adjust Timeout value in case of end of transfer */ + tmp_timeout = Timeout - (HAL_GetTick() - Tickstart); + tmp_tickstart = HAL_GetTick(); + + /* Calculate Timeout based on a software loop to avoid blocking issue if Systick is disabled */ + count = tmp_timeout * ((SystemCoreClock * 32U) >> 20U); + + while ((__HAL_SPI_GET_FLAG(hspi, Flag) ? SET : RESET) != State) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tmp_tickstart) >= tmp_timeout) || (tmp_timeout == 0U)) + { + /* Disable the SPI and reset the CRC: the CRC value should be cleared + on both master and slave sides in order to resynchronize the master + and slave for their respective CRC calculation */ + + /* Disable TXE, RXNE and ERR interrupts for the interrupt process */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + } + + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_TIMEOUT; + } + /* If Systick is disabled or not incremented, deactivate timeout to go in disable loop procedure */ + if (count == 0U) + { + tmp_timeout = 0U; + } + count--; + } + } + + return HAL_OK; +} + +/** + * @brief Handle SPI FIFO Communication Timeout. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param Fifo Fifo to check + * @param State Fifo state to check + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_WaitFifoStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Fifo, uint32_t State, + uint32_t Timeout, uint32_t Tickstart) +{ + __IO uint32_t count; + uint32_t tmp_timeout; + uint32_t tmp_tickstart; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; + + /* Adjust Timeout value in case of end of transfer */ + tmp_timeout = Timeout - (HAL_GetTick() - Tickstart); + tmp_tickstart = HAL_GetTick(); + + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + + /* Calculate Timeout based on a software loop to avoid blocking issue if Systick is disabled */ + count = tmp_timeout * ((SystemCoreClock * 35U) >> 20U); + + while ((hspi->Instance->SR & Fifo) != State) + { + if ((Fifo == SPI_SR_FRLVL) && (State == SPI_FRLVL_EMPTY)) + { + /* Flush Data Register by a blank read */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tmp_tickstart) >= tmp_timeout) || (tmp_timeout == 0U)) + { + /* Disable the SPI and reset the CRC: the CRC value should be cleared + on both master and slave sides in order to resynchronize the master + and slave for their respective CRC calculation */ + + /* Disable TXE, RXNE and ERR interrupts for the interrupt process */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + } + + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_TIMEOUT; + } + /* If Systick is disabled or not incremented, deactivate timeout to go in disable loop procedure */ + if (count == 0U) + { + tmp_timeout = 0U; + } + count--; + } + } + + return HAL_OK; +} + +/** + * @brief Handle the check of the RX transaction complete. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart) +{ + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + } + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + } + return HAL_OK; +} + +/** + * @brief Handle the check of the RXTX or TX transaction complete. + * @param hspi SPI handle + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart) +{ + /* Control if the TX fifo is empty */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FTLVL, SPI_FTLVL_EMPTY, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + /* Control if the RX fifo is empty */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + return HAL_OK; +} + +/** + * @brief Handle the end of the RXTX transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi) +{ + uint32_t tickstart; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) + { + hspi->State = HAL_SPI_STATE_READY; + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { +#endif /* USE_SPI_CRC */ + if (hspi->ErrorCode == HAL_SPI_ERROR_NONE) + { + if (hspi->State == HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_READY; + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxCpltCallback(hspi); +#else + HAL_SPI_RxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + hspi->State = HAL_SPI_STATE_READY; + /* Call user TxRx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxRxCpltCallback(hspi); +#else + HAL_SPI_TxRxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + } + else + { + hspi->State = HAL_SPI_STATE_READY; + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } +#if (USE_SPI_CRC != 0U) + } +#endif /* USE_SPI_CRC */ +} + +/** + * @brief Handle the end of the RX transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi) +{ + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + /* Check the end of the transaction */ + if (SPI_EndRxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + hspi->State = HAL_SPI_STATE_READY; + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { +#endif /* USE_SPI_CRC */ + if (hspi->ErrorCode == HAL_SPI_ERROR_NONE) + { + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxCpltCallback(hspi); +#else + HAL_SPI_RxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } +#if (USE_SPI_CRC != 0U) + } +#endif /* USE_SPI_CRC */ +} + +/** + * @brief Handle the end of the TX transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi) +{ + uint32_t tickstart; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* Disable TXE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR)); + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Clear overrun flag in 2 Lines communication mode because received is not read */ + if (hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxCpltCallback(hspi); +#else + HAL_SPI_TxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Handle abort a Rx transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi) +{ + __IO uint32_t count; + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + + /* Disable RXNEIE interrupt */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXNEIE)); + + /* Check RXNEIE is disabled */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + hspi->State = HAL_SPI_STATE_ABORT; +} + +/** + * @brief Handle abort a Tx or Rx/Tx transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi) +{ + __IO uint32_t count; + + count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + + /* Disable TXEIE interrupt */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXEIE)); + + /* Check TXEIE is disabled */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)); + + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Check case of Full-Duplex Mode and disable directly RXNEIE interrupt */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) + { + /* Disable RXNEIE interrupt */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXNEIE)); + + /* Check RXNEIE is disabled */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + } + hspi->State = HAL_SPI_STATE_ABORT; +} + +/** + * @} + */ + +#endif /* HAL_SPI_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi_ex.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi_ex.c new file mode 100644 index 0000000..a25079c --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi_ex.c @@ -0,0 +1,112 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_spi_ex.c + * @author MCD Application Team + * @brief Extended SPI HAL module driver. + * This file provides firmware functions to manage the following + * SPI peripheral extended functionalities : + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup SPIEx SPIEx + * @brief SPI Extended HAL module driver + * @{ + */ +#ifdef HAL_SPI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup SPIEx_Private_Constants SPIEx Private Constants + * @{ + */ +#define SPI_FIFO_SIZE 4UL +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SPIEx_Exported_Functions SPIEx Exported Functions + * @{ + */ + +/** @defgroup SPIEx_Exported_Functions_Group1 IO operation functions + * @brief Data transfers functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of extended functions to manage the SPI + data transfers. + + (#) Rx data flush function: + (++) HAL_SPIEx_FlushRxFifo() + +@endverbatim + * @{ + */ + +/** + * @brief Flush the RX fifo. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(const SPI_HandleTypeDef *hspi) +{ + __IO uint32_t tmpreg; + uint8_t count = 0U; + while ((hspi->Instance->SR & SPI_FLAG_FRLVL) != SPI_FRLVL_EMPTY) + { + count++; + tmpreg = hspi->Instance->DR; + UNUSED(tmpreg); /* To avoid GCC warning */ + if (count == SPI_FIFO_SIZE) + { + return HAL_TIMEOUT; + } + } + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_SPI_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim.c new file mode 100644 index 0000000..b7a3213 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim.c @@ -0,0 +1,7931 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_tim.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer (TIM) peripheral: + * + TIM Time Base Initialization + * + TIM Time Base Start + * + TIM Time Base Start Interruption + * + TIM Time Base Start DMA + * + TIM Output Compare/PWM Initialization + * + TIM Output Compare/PWM Channel Configuration + * + TIM Output Compare/PWM Start + * + TIM Output Compare/PWM Start Interruption + * + TIM Output Compare/PWM Start DMA + * + TIM Input Capture Initialization + * + TIM Input Capture Channel Configuration + * + TIM Input Capture Start + * + TIM Input Capture Start Interruption + * + TIM Input Capture Start DMA + * + TIM One Pulse Initialization + * + TIM One Pulse Channel Configuration + * + TIM One Pulse Start + * + TIM Encoder Interface Initialization + * + TIM Encoder Interface Start + * + TIM Encoder Interface Start Interruption + * + TIM Encoder Interface Start DMA + * + Commutation Event configuration with Interruption and DMA + * + TIM OCRef clear configuration + * + TIM External Clock configuration + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### TIMER Generic features ##### + ============================================================================== + [..] The Timer features include: + (#) 16-bit up, down, up/down auto-reload counter. + (#) 16-bit programmable prescaler allowing dividing (also on the fly) the + counter clock frequency either by any factor between 1 and 65536. + (#) Up to 4 independent channels for: + (++) Input Capture + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to interconnect + several timers together. + (#) Supports incremental encoder for positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Time Base : HAL_TIM_Base_MspInit() + (++) Input Capture : HAL_TIM_IC_MspInit() + (++) Output Compare : HAL_TIM_OC_MspInit() + (++) PWM generation : HAL_TIM_PWM_MspInit() + (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit() + (++) Encoder mode output : HAL_TIM_Encoder_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + Initialization function of this driver: + (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base + (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an + Output Compare signal. + (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a + PWM signal. + (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an + external signal. + (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer + in One Pulse Mode. + (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface. + + (#) Activate the TIM peripheral using one of the start functions depending from the feature used: + (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT() + (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT() + (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT() + (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT() + (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT() + (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT(). + + (#) The DMA Burst is managed with the two following functions: + HAL_TIM_DMABurst_WriteStart() + HAL_TIM_DMABurst_ReadStart() + + *** Callback registration *** + ============================================= + + [..] + The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_TIM_RegisterCallback() to register a callback. + HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle, + the Callback ID and a pointer to the user callback function. + + [..] + Use function HAL_TIM_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + + [..] + These functions allow to register/unregister following callbacks: + (+) Base_MspInitCallback : TIM Base Msp Init Callback. + (+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback. + (+) IC_MspInitCallback : TIM IC Msp Init Callback. + (+) IC_MspDeInitCallback : TIM IC Msp DeInit Callback. + (+) OC_MspInitCallback : TIM OC Msp Init Callback. + (+) OC_MspDeInitCallback : TIM OC Msp DeInit Callback. + (+) PWM_MspInitCallback : TIM PWM Msp Init Callback. + (+) PWM_MspDeInitCallback : TIM PWM Msp DeInit Callback. + (+) OnePulse_MspInitCallback : TIM One Pulse Msp Init Callback. + (+) OnePulse_MspDeInitCallback : TIM One Pulse Msp DeInit Callback. + (+) Encoder_MspInitCallback : TIM Encoder Msp Init Callback. + (+) Encoder_MspDeInitCallback : TIM Encoder Msp DeInit Callback. + (+) HallSensor_MspInitCallback : TIM Hall Sensor Msp Init Callback. + (+) HallSensor_MspDeInitCallback : TIM Hall Sensor Msp DeInit Callback. + (+) PeriodElapsedCallback : TIM Period Elapsed Callback. + (+) PeriodElapsedHalfCpltCallback : TIM Period Elapsed half complete Callback. + (+) TriggerCallback : TIM Trigger Callback. + (+) TriggerHalfCpltCallback : TIM Trigger half complete Callback. + (+) IC_CaptureCallback : TIM Input Capture Callback. + (+) IC_CaptureHalfCpltCallback : TIM Input Capture half complete Callback. + (+) OC_DelayElapsedCallback : TIM Output Compare Delay Elapsed Callback. + (+) PWM_PulseFinishedCallback : TIM PWM Pulse Finished Callback. + (+) PWM_PulseFinishedHalfCpltCallback : TIM PWM Pulse Finished half complete Callback. + (+) ErrorCallback : TIM Error Callback. + (+) CommutationCallback : TIM Commutation Callback. + (+) CommutationHalfCpltCallback : TIM Commutation half complete Callback. + (+) BreakCallback : TIM Break Callback. + (+) Break2Callback : TIM Break2 Callback. + + [..] +By default, after the Init and when the state is HAL_TIM_STATE_RESET +all interrupt callbacks are set to the corresponding weak functions: + examples HAL_TIM_TriggerCallback(), HAL_TIM_ErrorCallback(). + + [..] + Exception done for MspInit and MspDeInit functions that are reset to the legacy weak + functionalities in the Init / DeInit only when these callbacks are null + (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit + keep and use the user MspInit / MspDeInit callbacks(registered beforehand) + + [..] + Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only. + Exception done MspInit / MspDeInit that can be registered / unregistered + in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state, + thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_TIM_RegisterCallback() before calling DeInit or Init function. + + [..] + When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup TIM TIM + * @brief TIM HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup TIM_Private_Constants + * @{ + */ +#define TIMx_OR1_OCREF_CLR 0x00000001U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup TIM_Private_Functions + * @{ + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource); +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + const TIM_SlaveConfigTypeDef *sSlaveConfig); +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * +@verbatim + ============================================================================== + ##### Time Base functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM base. + (+) De-initialize the TIM base. + (+) Start the Time Base. + (+) Stop the Time Base. + (+) Start the Time Base and enable interrupt. + (+) Stop the Time Base and disable interrupt. + (+) Start the Time Base and enable DMA transfer. + (+) Stop the Time Base and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Time base Unit according to the specified + * parameters in the TIM_HandleTypeDef and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Base_DeInit() before HAL_TIM_Base_Init() + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Base_MspInitCallback == NULL) + { + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Base_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the Time Base configuration */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Base peripheral + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Base_MspDeInitCallback == NULL) + { + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Base_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspDeInit could be implemented in the user file + */ +} + + +/** + * @brief Starts the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the TIM Update interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the TIM Update interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, const uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Set the TIM state */ + if (htim->State == HAL_TIM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->State == HAL_TIM_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + htim->State = HAL_TIM_STATE_BUSY; + } + } + else + { + return HAL_ERROR; + } + + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Update DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * +@verbatim + ============================================================================== + ##### TIM Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Output Compare. + (+) De-initialize the TIM Output Compare. + (+) Start the TIM Output Compare. + (+) Stop the TIM Output Compare. + (+) Start the TIM Output Compare and enable interrupt. + (+) Stop the TIM Output Compare and disable interrupt. + (+) Start the TIM Output Compare and enable DMA transfer. + (+) Stop the TIM Output Compare and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Output Compare according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OC_DeInit() before HAL_TIM_OC_Init() + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OC_MspInitCallback == NULL) + { + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the Output Compare */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OC_MspDeInitCallback == NULL) + { + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * +@verbatim + ============================================================================== + ##### TIM PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM PWM. + (+) De-initialize the TIM PWM. + (+) Start the TIM PWM. + (+) Stop the TIM PWM. + (+) Start the TIM PWM and enable interrupt. + (+) Stop the TIM PWM and disable interrupt. + (+) Start the TIM PWM and enable DMA transfer. + (+) Stop the TIM PWM and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM PWM Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_PWM_DeInit() before HAL_TIM_PWM_Init() + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->PWM_MspInitCallback == NULL) + { + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->PWM_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the PWM */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->PWM_MspDeInitCallback == NULL) + { + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + } + /* DeInit the low level hardware */ + htim->PWM_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the PWM signal generation. + * @param htim TIM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Capture/Compare 3 request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * +@verbatim + ============================================================================== + ##### TIM Input Capture functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Input Capture. + (+) De-initialize the TIM Input Capture. + (+) Start the TIM Input Capture. + (+) Stop the TIM Input Capture. + (+) Start the TIM Input Capture and enable interrupt. + (+) Stop the TIM Input Capture and disable interrupt. + (+) Start the TIM Input Capture and enable DMA transfer. + (+) Stop the TIM Input Capture and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Input Capture Time base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_IC_DeInit() before HAL_TIM_IC_Init() + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->IC_MspInitCallback == NULL) + { + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->IC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the input capture */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->IC_MspDeInitCallback == NULL) + { + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->IC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Input Capture MSP. + * @param htim TIM Input Capture handle + * @retval None + */ +__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Input Capture MSP. + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * +@verbatim + ============================================================================== + ##### TIM One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM One Pulse. + (+) De-initialize the TIM One Pulse. + (+) Start the TIM One Pulse. + (+) Stop the TIM One Pulse. + (+) Start the TIM One Pulse and enable interrupt. + (+) Stop the TIM One Pulse and disable interrupt. + (+) Start the TIM One Pulse and enable DMA transfer. + (+) Stop the TIM One Pulse and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM One Pulse Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OnePulse_DeInit() before HAL_TIM_OnePulse_Init() + * @note When the timer instance is initialized in One Pulse mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM One Pulse handle + * @param OnePulseMode Select the One pulse mode. + * This parameter can be one of the following values: + * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated. + * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_OPM_MODE(OnePulseMode)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OnePulse_MspInitCallback == NULL) + { + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OnePulse_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OnePulse_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the One Pulse Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Reset the OPM Bit */ + htim->Instance->CR1 &= ~TIM_CR1_OPM; + + /* Configure the OPM Mode */ + htim->Instance->CR1 |= OnePulseMode; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM One Pulse + * @param htim TIM One Pulse handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OnePulse_MspDeInitCallback == NULL) + { + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OnePulse_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_OnePulse_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM One Pulse signal generation. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * +@verbatim + ============================================================================== + ##### TIM Encoder functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Encoder. + (+) De-initialize the TIM Encoder. + (+) Start the TIM Encoder. + (+) Stop the TIM Encoder. + (+) Start the TIM Encoder and enable interrupt. + (+) Stop the TIM Encoder and disable interrupt. + (+) Start the TIM Encoder and enable DMA transfer. + (+) Stop the TIM Encoder and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Encoder Interface and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Encoder_DeInit() before HAL_TIM_Encoder_Init() + * @note Encoder mode and External clock mode 2 are not compatible and must not be selected together + * Ex: A call for @ref HAL_TIM_Encoder_Init will erase the settings of @ref HAL_TIM_ConfigClockSource + * using TIM_CLOCKSOURCE_ETRMODE2 and vice versa + * @note When the timer instance is initialized in Encoder mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM Encoder Interface handle + * @param sConfig TIM Encoder Interface configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, const TIM_Encoder_InitTypeDef *sConfig) +{ + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC2Polarity)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Encoder_MspInitCallback == NULL) + { + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Encoder_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_Encoder_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Reset the SMS and ECE bits */ + htim->Instance->SMCR &= ~(TIM_SMCR_SMS | TIM_SMCR_ECE); + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = htim->Instance->CCMR1; + + /* Get the TIMx CCER register value */ + tmpccer = htim->Instance->CCER; + + /* Set the encoder Mode */ + tmpsmcr |= sConfig->EncoderMode; + + /* Select the Capture Compare 1 and the Capture Compare 2 as input */ + tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S); + tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U)); + + /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */ + tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC); + tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F); + tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U); + tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U); + + /* Set the TI1 and the TI2 Polarities */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P); + tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP); + tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U); + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Write to TIMx CCMR1 */ + htim->Instance->CCMR1 = tmpccmr1; + + /* Write to TIMx CCER */ + htim->Instance->CCER = tmpccer; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + + +/** + * @brief DeInitializes the TIM Encoder interface + * @param htim TIM Encoder Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Encoder_MspDeInitCallback == NULL) + { + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Encoder_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Encoder_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + } + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + /* Enable the capture compare Interrupts 1 and/or 2 */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + } + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 and 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @param pData1 The destination Buffer address for IC1. + * @param pData2 The destination Buffer address for IC2. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData1 == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData2 == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((((pData1 == NULL) || (pData2 == NULL))) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError; + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + + default: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 and 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ +/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief TIM IRQ handler management + * +@verbatim + ============================================================================== + ##### IRQ handler management ##### + ============================================================================== + [..] + This section provides Timer IRQ handler function. + +@endverbatim + * @{ + */ +/** + * @brief This function handles TIM interrupts requests. + * @param htim TIM handle + * @retval None + */ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) +{ + uint32_t itsource = htim->Instance->DIER; + uint32_t itflag = htim->Instance->SR; + + /* Capture compare 1 event */ + if ((itflag & (TIM_FLAG_CC1)) == (TIM_FLAG_CC1)) + { + if ((itsource & (TIM_IT_CC1)) == (TIM_IT_CC1)) + { + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC1); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + } + /* Capture compare 2 event */ + if ((itflag & (TIM_FLAG_CC2)) == (TIM_FLAG_CC2)) + { + if ((itsource & (TIM_IT_CC2)) == (TIM_IT_CC2)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC2); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 3 event */ + if ((itflag & (TIM_FLAG_CC3)) == (TIM_FLAG_CC3)) + { + if ((itsource & (TIM_IT_CC3)) == (TIM_IT_CC3)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC3); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 4 event */ + if ((itflag & (TIM_FLAG_CC4)) == (TIM_FLAG_CC4)) + { + if ((itsource & (TIM_IT_CC4)) == (TIM_IT_CC4)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC4); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* TIM Update event */ + if ((itflag & (TIM_FLAG_UPDATE)) == (TIM_FLAG_UPDATE)) + { + if ((itsource & (TIM_IT_UPDATE)) == (TIM_IT_UPDATE)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_UPDATE); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Break input event */ + if (((itflag & (TIM_FLAG_BREAK)) == (TIM_FLAG_BREAK)) || \ + ((itflag & (TIM_FLAG_SYSTEM_BREAK)) == (TIM_FLAG_SYSTEM_BREAK))) + { + if ((itsource & (TIM_IT_BREAK)) == (TIM_IT_BREAK)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK | TIM_FLAG_SYSTEM_BREAK); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->BreakCallback(htim); +#else + HAL_TIMEx_BreakCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Break2 input event */ + if ((itflag & (TIM_FLAG_BREAK2)) == (TIM_FLAG_BREAK2)) + { + if ((itsource & (TIM_IT_BREAK)) == (TIM_IT_BREAK)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK2); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->Break2Callback(htim); +#else + HAL_TIMEx_Break2Callback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Trigger detection event */ + if ((itflag & (TIM_FLAG_TRIGGER)) == (TIM_FLAG_TRIGGER)) + { + if ((itsource & (TIM_IT_TRIGGER)) == (TIM_IT_TRIGGER)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_TRIGGER); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM commutation event */ + if ((itflag & (TIM_FLAG_COM)) == (TIM_FLAG_COM)) + { + if ((itsource & (TIM_IT_COM)) == (TIM_IT_COM)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_COM); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief TIM Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode. + (+) Configure External Clock source. + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master and the Slave synchronization. + (+) Configure the DMA Burst Mode. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the TIM Output Compare Channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM Output Compare handle + * @param sConfig TIM Output Compare configuration structure + * @param Channel TIM Channels to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, + const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_OC_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 1 in Output Compare */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 2 in Output Compare */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 3 in Output Compare */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 4 in Output Compare */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_5: + { + /* Check the parameters */ + assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 5 in Output Compare */ + TIM_OC5_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_6: + { + /* Check the parameters */ + assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 6 in Output Compare */ + TIM_OC6_SetConfig(htim->Instance, sConfig); + break; + } + + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM Input Capture Channels according to the specified + * parameters in the TIM_IC_InitTypeDef. + * @param htim TIM IC handle + * @param sConfig TIM Input Capture configuration structure + * @param Channel TIM Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_IC_InitTypeDef *sConfig, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity)); + assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter)); + + /* Process Locked */ + __HAL_LOCK(htim); + + if (Channel == TIM_CHANNEL_1) + { + /* TI1 Configuration */ + TIM_TI1_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_2) + { + /* TI2 Configuration */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Set the IC2PSC value */ + htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U); + } + else if (Channel == TIM_CHANNEL_3) + { + /* TI3 Configuration */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + TIM_TI3_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC3PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC; + + /* Set the IC3PSC value */ + htim->Instance->CCMR2 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_4) + { + /* TI4 Configuration */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + TIM_TI4_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC4PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC; + + /* Set the IC4PSC value */ + htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U); + } + else + { + status = HAL_ERROR; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM PWM channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM PWM handle + * @param sConfig TIM PWM configuration structure + * @param Channel TIM Channels to be configured + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, + const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_PWM_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the Channel 1 in PWM mode */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel1 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the Channel 2 in PWM mode */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel2 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U; + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the Channel 3 in PWM mode */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel3 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the Channel 4 in PWM mode */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel4 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U; + break; + } + + case TIM_CHANNEL_5: + { + /* Check the parameters */ + assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); + + /* Configure the Channel 5 in PWM mode */ + TIM_OC5_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel5*/ + htim->Instance->CCMR3 |= TIM_CCMR3_OC5PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE; + htim->Instance->CCMR3 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_6: + { + /* Check the parameters */ + assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); + + /* Configure the Channel 6 in PWM mode */ + TIM_OC6_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel6 */ + htim->Instance->CCMR3 |= TIM_CCMR3_OC6PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE; + htim->Instance->CCMR3 |= sConfig->OCFastMode << 8U; + break; + } + + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM One Pulse Channels according to the specified + * parameters in the TIM_OnePulse_InitTypeDef. + * @param htim TIM One Pulse handle + * @param sConfig TIM One Pulse configuration structure + * @param OutputChannel TIM output channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param InputChannel TIM input Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @note To output a waveform with a minimum delay user can enable the fast + * mode by calling the @ref __HAL_TIM_ENABLE_OCxFAST macro. Then CCx + * output is forced in response to the edge detection on TIx input, + * without taking in account the comparison. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel) +{ + HAL_StatusTypeDef status = HAL_OK; + TIM_OC_InitTypeDef temp1; + + /* Check the parameters */ + assert_param(IS_TIM_OPM_CHANNELS(OutputChannel)); + assert_param(IS_TIM_OPM_CHANNELS(InputChannel)); + + if (OutputChannel != InputChannel) + { + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Extract the Output compare configuration from sConfig structure */ + temp1.OCMode = sConfig->OCMode; + temp1.Pulse = sConfig->Pulse; + temp1.OCPolarity = sConfig->OCPolarity; + temp1.OCNPolarity = sConfig->OCNPolarity; + temp1.OCIdleState = sConfig->OCIdleState; + temp1.OCNIdleState = sConfig->OCNIdleState; + + switch (OutputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_OC1_SetConfig(htim->Instance, &temp1); + break; + } + + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_OC2_SetConfig(htim->Instance, &temp1); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + switch (InputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1FP1; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI2FP2; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + default: + status = HAL_ERROR; + break; + } + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR1 + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength) +{ + HAL_StatusTypeDef status; + + status = HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); + + + + return status; +} + +/** + * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR1 + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM DMA Burst mode + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR1 + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) +{ + HAL_StatusTypeDef status; + + status = HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); + + + return status; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR1 + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stop the DMA burst reading + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief Generate a software event + * @param htim TIM handle + * @param EventSource specifies the event source. + * This parameter can be one of the following values: + * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source + * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source + * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source + * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source + * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source + * @arg TIM_EVENTSOURCE_COM: Timer COM event source + * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source + * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source + * @arg TIM_EVENTSOURCE_BREAK2: Timer Break2 event source + * @note Basic timers can only generate an update event. + * @note TIM_EVENTSOURCE_COM is relevant only with advanced timer instances. + * @note TIM_EVENTSOURCE_BREAK and TIM_EVENTSOURCE_BREAK2 are relevant + * only for timer instances supporting break input(s). + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_EVENT_SOURCE(EventSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the event sources */ + htim->Instance->EGR = EventSource; + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configures the OCRef clear feature + * @param htim TIM handle + * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that + * contains the OCREF clear feature and parameters for the TIM peripheral. + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, + const TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + switch (sClearInputConfig->ClearInputSource) + { + case TIM_CLEARINPUTSOURCE_NONE: + { + /* Clear the OCREF clear selection bit and the the ETR Bits */ + CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_OCCS | TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP)); + + /* Clear TIMx_OR1_OCREF_CLR (reset value) */ + CLEAR_BIT(htim->Instance->OR1, TIMx_OR1_OCREF_CLR); + break; + } +#if defined(COMP1) || defined(COMP2) || defined(COMP3) +#if defined(COMP1) && defined(COMP2) + case TIM_CLEARINPUTSOURCE_COMP1: + case TIM_CLEARINPUTSOURCE_COMP2: +#endif /* COMP1 && COMP2 */ +#if defined(COMP3) + case TIM_CLEARINPUTSOURCE_COMP3: +#endif /* COMP3 */ + { + /* Clear the OCREF clear selection bit */ + CLEAR_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS); + + /* OCREF_CLR_INT is connected to COMPx output */ + MODIFY_REG(htim->Instance->OR1, TIMx_OR1_OCREF_CLR, sClearInputConfig->ClearInputSource); + break; + } +#endif /* COMP1 || COMP2 || COMP3 */ + + case TIM_CLEARINPUTSOURCE_ETR: + { + /* Check the parameters */ + assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity)); + assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler)); + assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter)); + + /* When OCRef clear feature is used with ETR source, ETR prescaler must be off */ + if (sClearInputConfig->ClearInputPrescaler != TIM_CLEARINPUTPRESCALER_DIV1) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + TIM_ETR_SetConfig(htim->Instance, + sClearInputConfig->ClearInputPrescaler, + sClearInputConfig->ClearInputPolarity, + sClearInputConfig->ClearInputFilter); + + /* Set the OCREF clear selection bit */ + SET_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS); + + /* Clear TIMx_OR1_OCREF_CLR (reset value) */ + CLEAR_BIT(htim->Instance->OR1, TIMx_OR1_OCREF_CLR); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + switch (Channel) + { + case TIM_CHANNEL_1: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 1 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + else + { + /* Disable the OCREF clear feature for Channel 1 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + break; + } + case TIM_CHANNEL_2: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 2 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + else + { + /* Disable the OCREF clear feature for Channel 2 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + break; + } + case TIM_CHANNEL_3: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 3 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + else + { + /* Disable the OCREF clear feature for Channel 3 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + break; + } + case TIM_CHANNEL_4: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 4 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + else + { + /* Disable the OCREF clear feature for Channel 4 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + break; + } + case TIM_CHANNEL_5: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 5 */ + SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE); + } + else + { + /* Disable the OCREF clear feature for Channel 5 */ + CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE); + } + break; + } + case TIM_CHANNEL_6: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 6 */ + SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE); + } + else + { + /* Disable the OCREF clear feature for Channel 6 */ + CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE); + } + break; + } + default: + break; + } + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Configures the clock source to be used + * @param htim TIM handle + * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that + * contains the clock source information for the TIM peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, const TIM_ClockConfigTypeDef *sClockSourceConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource)); + + /* Reset the SMS, TS, ECE, ETPS and ETRF bits */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS); + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + htim->Instance->SMCR = tmpsmcr; + + switch (sClockSourceConfig->ClockSource) + { + case TIM_CLOCKSOURCE_INTERNAL: + { + assert_param(IS_TIM_INSTANCE(htim->Instance)); + break; + } + + case TIM_CLOCKSOURCE_ETRMODE1: + { + /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + + /* Select the External clock mode1 and the ETRF trigger */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1); + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + break; + } + + case TIM_CLOCKSOURCE_ETRMODE2: + { + /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + /* Enable the External clock mode2 */ + htim->Instance->SMCR |= TIM_SMCR_ECE; + break; + } + + case TIM_CLOCKSOURCE_TI1: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1); + break; + } + + case TIM_CLOCKSOURCE_TI2: + { + /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI2 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI2_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2); + break; + } + + case TIM_CLOCKSOURCE_TI1ED: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED); + break; + } + + case TIM_CLOCKSOURCE_ITR0: + case TIM_CLOCKSOURCE_ITR1: + case TIM_CLOCKSOURCE_ITR2: + case TIM_CLOCKSOURCE_ITR3: + { + /* Check whether or not the timer instance supports internal trigger input */ + assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); + + TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource); + break; + } + + default: + status = HAL_ERROR; + break; + } + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Selects the signal connected to the TI1 input: direct from CH1_input + * or a XOR combination between CH1_input, CH2_input & CH3_input + * @param htim TIM handle. + * @param TI1_Selection Indicate whether or not channel 1 is connected to the + * output of a XOR gate. + * This parameter can be one of the following values: + * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input + * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3 + * pins are connected to the TI1 input (XOR combination) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection) +{ + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TI1SELECTION(TI1_Selection)); + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Reset the TI1 selection */ + tmpcr2 &= ~TIM_CR2_TI1S; + + /* Set the TI1 selection */ + tmpcr2 |= TI1_Selection; + + /* Write to TIMxCR2 */ + htim->Instance->CR2 = tmpcr2; + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Disable Trigger Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode in interrupt mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, + const TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Enable Trigger Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Read the captured value from Capture Compare unit + * @param htim TIM handle. + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval Captured value + */ +uint32_t HAL_TIM_ReadCapturedValue(const TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpreg = 0U; + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Return the capture 1 value */ + tmpreg = htim->Instance->CCR1; + + break; + } + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Return the capture 2 value */ + tmpreg = htim->Instance->CCR2; + + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Return the capture 3 value */ + tmpreg = htim->Instance->CCR3; + + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Return the capture 4 value */ + tmpreg = htim->Instance->CCR4; + + break; + } + + default: + break; + } + + return tmpreg; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * +@verbatim + ============================================================================== + ##### TIM Callbacks functions ##### + ============================================================================== + [..] + This section provides TIM callback functions: + (+) TIM Period elapsed callback + (+) TIM Output Compare callback + (+) TIM Input capture callback + (+) TIM Trigger callback + (+) TIM Error callback + +@endverbatim + * @{ + */ + +/** + * @brief Period elapsed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Period elapsed half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Output Compare callback in non-blocking mode + * @param htim TIM OC handle + * @retval None + */ +__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture half complete callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Timer error callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_ErrorCallback could be implemented in the user file + */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User TIM callback to be used instead of the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID + * @param pCallback pointer to the callback function + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + htim->PeriodElapsedCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + htim->PeriodElapsedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_CB_ID : + htim->TriggerCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + htim->TriggerHalfCpltCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + htim->IC_CaptureCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + htim->IC_CaptureHalfCpltCallback = pCallback; + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + htim->OC_DelayElapsedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + htim->PWM_PulseFinishedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + htim->PWM_PulseFinishedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_ERROR_CB_ID : + htim->ErrorCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_CB_ID : + htim->CommutationCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + htim->CommutationHalfCpltCallback = pCallback; + break; + + case HAL_TIM_BREAK_CB_ID : + htim->BreakCallback = pCallback; + break; + + case HAL_TIM_BREAK2_CB_ID : + htim->Break2Callback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a TIM callback + * TIM callback is redirected to the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + /* Legacy weak Base MspInit Callback */ + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + /* Legacy weak Base Msp DeInit Callback */ + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + /* Legacy weak IC Msp Init Callback */ + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + /* Legacy weak IC Msp DeInit Callback */ + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + /* Legacy weak OC Msp Init Callback */ + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + /* Legacy weak OC Msp DeInit Callback */ + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + /* Legacy weak PWM Msp Init Callback */ + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + /* Legacy weak PWM Msp DeInit Callback */ + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + /* Legacy weak One Pulse Msp Init Callback */ + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + /* Legacy weak One Pulse Msp DeInit Callback */ + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + /* Legacy weak Encoder Msp Init Callback */ + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + /* Legacy weak Encoder Msp DeInit Callback */ + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + /* Legacy weak Hall Sensor Msp Init Callback */ + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + /* Legacy weak Hall Sensor Msp DeInit Callback */ + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + /* Legacy weak Period Elapsed Callback */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + /* Legacy weak Period Elapsed half complete Callback */ + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; + break; + + case HAL_TIM_TRIGGER_CB_ID : + /* Legacy weak Trigger Callback */ + htim->TriggerCallback = HAL_TIM_TriggerCallback; + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + /* Legacy weak Trigger half complete Callback */ + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + /* Legacy weak IC Capture Callback */ + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + /* Legacy weak IC Capture half complete Callback */ + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + /* Legacy weak OC Delay Elapsed Callback */ + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + /* Legacy weak PWM Pulse Finished Callback */ + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + /* Legacy weak PWM Pulse Finished half complete Callback */ + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; + break; + + case HAL_TIM_ERROR_CB_ID : + /* Legacy weak Error Callback */ + htim->ErrorCallback = HAL_TIM_ErrorCallback; + break; + + case HAL_TIM_COMMUTATION_CB_ID : + /* Legacy weak Commutation Callback */ + htim->CommutationCallback = HAL_TIMEx_CommutCallback; + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + /* Legacy weak Commutation half complete Callback */ + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; + break; + + case HAL_TIM_BREAK_CB_ID : + /* Legacy weak Break Callback */ + htim->BreakCallback = HAL_TIMEx_BreakCallback; + break; + + case HAL_TIM_BREAK2_CB_ID : + /* Legacy weak Break2 Callback */ + htim->Break2Callback = HAL_TIMEx_Break2Callback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + /* Legacy weak Base MspInit Callback */ + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + /* Legacy weak Base Msp DeInit Callback */ + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + /* Legacy weak IC Msp Init Callback */ + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + /* Legacy weak IC Msp DeInit Callback */ + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + /* Legacy weak OC Msp Init Callback */ + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + /* Legacy weak OC Msp DeInit Callback */ + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + /* Legacy weak PWM Msp Init Callback */ + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + /* Legacy weak PWM Msp DeInit Callback */ + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + /* Legacy weak One Pulse Msp Init Callback */ + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + /* Legacy weak One Pulse Msp DeInit Callback */ + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + /* Legacy weak Encoder Msp Init Callback */ + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + /* Legacy weak Encoder Msp DeInit Callback */ + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + /* Legacy weak Hall Sensor Msp Init Callback */ + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + /* Legacy weak Hall Sensor Msp DeInit Callback */ + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief TIM Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Base handle state. + * @param htim TIM Base handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM OC handle state. + * @param htim TIM Output Compare handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM PWM handle state. + * @param htim TIM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Input Capture handle state. + * @param htim TIM IC handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM One Pulse Mode handle state. + * @param htim TIM OPM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM Encoder Interface handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM handle + * @retval Active channel + */ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(const TIM_HandleTypeDef *htim) +{ + return htim->Channel; +} + +/** + * @brief Return actual state of the TIM channel. + * @param htim TIM handle + * @param Channel TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval TIM Channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(const TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + + return channel_state; +} + +/** + * @brief Return actual state of a DMA burst operation. + * @param htim TIM handle + * @retval DMA burst state + */ +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(const TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + + return htim->DMABurstState; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ + +/** + * @brief TIM DMA error callback + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMAError(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedHalfCpltCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureHalfCpltCallback(htim); +#else + HAL_TIM_IC_CaptureHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Period Elapse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_UPDATE]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Period Elapse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedHalfCpltCallback(htim); +#else + HAL_TIM_PeriodElapsedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_TRIGGER]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerHalfCpltCallback(htim); +#else + HAL_TIM_TriggerHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief Time Base configuration + * @param TIMx TIM peripheral + * @param Structure TIM Base configuration structure + * @retval None + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, const TIM_Base_InitTypeDef *Structure) +{ + uint32_t tmpcr1; + tmpcr1 = TIMx->CR1; + + /* Set TIM Time Base Unit parameters ---------------------------------------*/ + if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) + { + /* Select the Counter Mode */ + tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS); + tmpcr1 |= Structure->CounterMode; + } + + if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) + { + /* Set the clock division */ + tmpcr1 &= ~TIM_CR1_CKD; + tmpcr1 |= (uint32_t)Structure->ClockDivision; + } + + /* Set the auto-reload preload */ + MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload); + + TIMx->CR1 = tmpcr1; + + /* Set the Autoreload value */ + TIMx->ARR = (uint32_t)Structure->Period ; + + /* Set the Prescaler value */ + TIMx->PSC = Structure->Prescaler; + + if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) + { + /* Set the Repetition Counter value */ + TIMx->RCR = Structure->RepetitionCounter; + } + + /* Generate an update event to reload the Prescaler + and the repetition counter (only for advanced timer) value immediately */ + TIMx->EGR = TIM_EGR_UG; + + /* Check if the update flag is set after the Update Generation, if so clear the UIF flag */ + if (HAL_IS_BIT_SET(TIMx->SR, TIM_FLAG_UPDATE)) + { + /* Clear the update flag */ + CLEAR_BIT(TIMx->SR, TIM_FLAG_UPDATE); + } +} + +/** + * @brief Timer Output Compare 1 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~TIM_CCMR1_OC1M; + tmpccmrx &= ~TIM_CCMR1_CC1S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC1P; + /* Set the Output Compare Polarity */ + tmpccer |= OC_Config->OCPolarity; + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1)) + { + /* Check parameters */ + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC1NP; + /* Set the Output N Polarity */ + tmpccer |= OC_Config->OCNPolarity; + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC1NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS1; + tmpcr2 &= ~TIM_CR2_OIS1N; + /* Set the Output Idle state */ + tmpcr2 |= OC_Config->OCIdleState; + /* Set the Output N Idle state */ + tmpcr2 |= OC_Config->OCNIdleState; + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR1 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 2 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR1_OC2M; + tmpccmrx &= ~TIM_CCMR1_CC2S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC2P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 4U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC2NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 4U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC2NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS2; + tmpcr2 &= ~TIM_CR2_OIS2N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 2U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 2U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR2 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 3 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the Channel 3: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC3M; + tmpccmrx &= ~TIM_CCMR2_CC3S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC3P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 8U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC3NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 8U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC3NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS3; + tmpcr2 &= ~TIM_CR2_OIS3N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 4U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 4U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR3 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 4 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC4M; + tmpccmrx &= ~TIM_CCMR2_CC4S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC4P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 12U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS4; + + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 6U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR4 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 5 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, + const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the output: Reset the CCxE Bit */ + TIMx->CCER &= ~TIM_CCER_CC5E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR3; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~(TIM_CCMR3_OC5M); + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC5P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 16U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS5; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 8U); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR3 */ + TIMx->CCMR3 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR5 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 6 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, + const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the output: Reset the CCxE Bit */ + TIMx->CCER &= ~TIM_CCER_CC6E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR3; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~(TIM_CCMR3_OC6M); + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= (uint32_t)~TIM_CCER_CC6P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 20U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS6; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 10U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR3 */ + TIMx->CCMR3 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR6 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Slave Timer configuration function + * @param htim TIM handle + * @param sSlaveConfig Slave timer configuration + * @retval None + */ +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + const TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Reset the Trigger Selection Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source */ + tmpsmcr |= sSlaveConfig->InputTrigger; + + /* Reset the slave mode Bits */ + tmpsmcr &= ~TIM_SMCR_SMS; + /* Set the slave mode */ + tmpsmcr |= sSlaveConfig->SlaveMode; + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Configure the trigger prescaler, filter, and polarity */ + switch (sSlaveConfig->InputTrigger) + { + case TIM_TS_ETRF: + { + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + /* Configure the ETR Trigger source */ + TIM_ETR_SetConfig(htim->Instance, + sSlaveConfig->TriggerPrescaler, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI1F_ED: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + if (sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED) + { + return HAL_ERROR; + } + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = htim->Instance->CCER; + htim->Instance->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = htim->Instance->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + htim->Instance->CCMR1 = tmpccmr1; + htim->Instance->CCER = tmpccer; + break; + } + + case TIM_TS_TI1FP1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI1 Filter and Polarity */ + TIM_TI1_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI2FP2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI2 Filter and Polarity */ + TIM_TI2_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_ITR0: + case TIM_TS_ITR1: + case TIM_TS_ITR2: + case TIM_TS_ITR3: + { + /* Check the parameter */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + break; + } + + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Configure the TI1 as Input. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 + * (on channel2 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + + /* Select the Input */ + if (IS_TIM_CC2_INSTANCE(TIMx) != RESET) + { + tmpccmr1 &= ~TIM_CCMR1_CC1S; + tmpccmr1 |= TIM_ICSelection; + } + else + { + tmpccmr1 |= TIM_CCMR1_CC1S_0; + } + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI1. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= (TIM_ICFilter << 4U); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= TIM_ICPolarity; + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI2 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 + * (on channel1 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + + /* Select the Input */ + tmpccmr1 &= ~TIM_CCMR1_CC2S; + tmpccmr1 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI2. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= (TIM_ICFilter << 12U); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (TIM_ICPolarity << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI3 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 3: Reset the CC3E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC3E; + tmpccmr2 = TIMx->CCMR2; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC3S; + tmpccmr2 |= TIM_ICSelection; + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC3F; + tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F); + + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP); + tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI4 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + * @retval None + */ +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 4: Reset the CC4E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC4E; + tmpccmr2 = TIMx->CCMR2; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC4S; + tmpccmr2 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC4F; + tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F); + + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP); + tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer ; +} + +/** + * @brief Selects the Input Trigger source + * @param TIMx to select the TIM peripheral + * @param InputTriggerSource The Input Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal Trigger 0 + * @arg TIM_TS_ITR1: Internal Trigger 1 + * @arg TIM_TS_ITR2: Internal Trigger 2 + * @arg TIM_TS_ITR3: Internal Trigger 3 + * @arg TIM_TS_TI1F_ED: TI1 Edge Detector + * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 + * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 + * @arg TIM_TS_ETRF: External Trigger input + * @retval None + */ +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource) +{ + uint32_t tmpsmcr; + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the TS Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source and the slave mode*/ + tmpsmcr |= (InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1); + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} +/** + * @brief Configures the TIMx External Trigger (ETR). + * @param TIMx to select the TIM peripheral + * @param TIM_ExtTRGPrescaler The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF. + * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2. + * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4. + * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active. + * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active. + * @param ExtTRGFilter External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter) +{ + uint32_t tmpsmcr; + + tmpsmcr = TIMx->SMCR; + + /* Reset the ETR Bits */ + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + + /* Set the Prescaler, the Filter value and the Polarity */ + tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U))); + + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel x. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @param ChannelState specifies the TIM Channel CCxE bit new state. + * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_DISABLE. + * @retval None + */ +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_TIM_CHANNELS(Channel)); + + tmp = TIM_CCER_CC1E << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + + /* Reset the CCxE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxE Bit */ + TIMx->CCER |= (uint32_t)(ChannelState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Reset interrupt callbacks to the legacy weak callbacks. + * @param htim pointer to a TIM_HandleTypeDef structure that contains + * the configuration information for TIM module. + * @retval None + */ +void TIM_ResetCallback(TIM_HandleTypeDef *htim) +{ + /* Reset the TIM callback to the legacy weak callbacks */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; + htim->TriggerCallback = HAL_TIM_TriggerCallback; + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; + htim->ErrorCallback = HAL_TIM_ErrorCallback; + htim->CommutationCallback = HAL_TIMEx_CommutCallback; + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; + htim->BreakCallback = HAL_TIMEx_BreakCallback; + htim->Break2Callback = HAL_TIMEx_Break2Callback; +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim_ex.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim_ex.c new file mode 100644 index 0000000..ee268d8 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim_ex.c @@ -0,0 +1,2857 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_tim_ex.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer Extended peripheral: + * + Time Hall Sensor Interface Initialization + * + Time Hall Sensor Interface Start + * + Time Complementary signal break and dead time configuration + * + Time Master and Slave synchronization configuration + * + Time Output Compare/PWM Channel Configuration (for channels 5 and 6) + * + Time OCRef clear configuration + * + Timer remapping capabilities configuration + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### TIMER Extended features ##### + ============================================================================== + [..] + The Timer Extended features include: + (#) Complementary outputs with programmable dead-time for : + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to + interconnect several timers together. + (#) Break input to put the timer output signals in reset state or in a known state. + (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for + positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Hall Sensor output : HAL_TIMEx_HallSensor_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + initialization function of this driver: + (++) HAL_TIMEx_HallSensor_Init() and HAL_TIMEx_ConfigCommutEvent(): to use the + Timer Hall Sensor Interface and the commutation event with the corresponding + Interrupt and DMA request if needed (Note that One Timer is used to interface + with the Hall sensor Interface and another Timer should be used to use + the commutation event). + + (#) Activate the TIM peripheral using one of the start functions: + (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), + HAL_TIMEx_OCN_Start_IT() + (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), + HAL_TIMEx_PWMN_Start_IT() + (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT() + (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), + HAL_TIMEx_HallSensor_Start_IT(). + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup TIMEx TIMEx + * @brief TIM Extended HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Constants TIM Extended Private Constants + * @{ + */ +/* Timeout for break input rearm */ +#define TIM_BREAKINPUT_REARM_TIMEOUT 5UL /* 5 milliseconds */ +/** + * @} + */ +/* End of private constants --------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma); +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @defgroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * +@verbatim + ============================================================================== + ##### Timer Hall Sensor functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure TIM HAL Sensor. + (+) De-initialize TIM HAL Sensor. + (+) Start the Hall Sensor Interface. + (+) Stop the Hall Sensor Interface. + (+) Start the Hall Sensor Interface and enable interrupts. + (+) Stop the Hall Sensor Interface and disable interrupts. + (+) Start the Hall Sensor Interface and enable DMA transfers. + (+) Stop the Hall Sensor Interface and disable DMA transfers. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Hall Sensor Interface and initialize the associated handle. + * @note When the timer instance is initialized in Hall Sensor Interface mode, + * timer channels 1 and channel 2 are reserved and cannot be used for + * other purpose. + * @param htim TIM Hall Sensor Interface handle + * @param sConfig TIM Hall Sensor configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, const TIM_HallSensor_InitTypeDef *sConfig) +{ + TIM_OC_InitTypeDef OC_Config; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy week callbacks */ + TIM_ResetCallback(htim); + + if (htim->HallSensor_MspInitCallback == NULL) + { + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->HallSensor_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIMEx_HallSensor_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */ + TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->IC1Prescaler; + + /* Enable the Hall sensor interface (XOR function of the three inputs) */ + htim->Instance->CR2 |= TIM_CR2_TI1S; + + /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1F_ED; + + /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_RESET; + + /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/ + OC_Config.OCFastMode = TIM_OCFAST_DISABLE; + OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET; + OC_Config.OCMode = TIM_OCMODE_PWM2; + OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET; + OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH; + OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH; + OC_Config.Pulse = sConfig->Commutation_Delay; + + TIM_OC2_SetConfig(htim->Instance, &OC_Config); + + /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2 + register to 101 */ + htim->Instance->CR2 &= ~TIM_CR2_MMS; + htim->Instance->CR2 |= TIM_TRGO_OC2REF; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Hall Sensor interface + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->HallSensor_MspDeInitCallback == NULL) + { + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + } + /* DeInit the low level hardware */ + htim->HallSensor_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIMEx_HallSensor_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Hall Sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1, 2 and 3 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the capture compare Interrupts 1 event */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts event */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Set the DMA Input Capture 1 Callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel for Capture 1*/ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the capture compare 1 Interrupt */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + + /* Disable the capture compare Interrupts 1 event */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * +@verbatim + ============================================================================== + ##### Timer Complementary Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary Output Compare/PWM. + (+) Stop the Complementary Output Compare/PWM. + (+) Start the Complementary Output Compare/PWM and enable interrupts. + (+) Stop the Complementary Output Compare/PWM and disable interrupts. + (+) Start the Complementary Output Compare/PWM and enable DMA transfers. + (+) Stop the Complementary Output Compare/PWM and disable DMA transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM OC handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & TIM_CCER_CCxNE_MASK) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * +@verbatim + ============================================================================== + ##### Timer Complementary PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary PWM. + (+) Stop the Complementary PWM. + (+) Start the Complementary PWM and enable interrupts. + (+) Stop the Complementary PWM and disable interrupts. + (+) Start the Complementary PWM and enable DMA transfers. + (+) Stop the Complementary PWM and disable DMA transfers. +@endverbatim + * @{ + */ + +/** + * @brief Starts the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & TIM_CCER_CCxNE_MASK) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode on the + * complementary output + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode on the complementary + * output + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * +@verbatim + ============================================================================== + ##### Timer Complementary One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary One Pulse generation. + (+) Stop the Complementary One Pulse. + (+) Start the Complementary One Pulse and enable interrupts. + (+) Stop the Complementary One Pulse and disable interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM One Pulse signal generation on the complementary + * output. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to enable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation on the complementary + * output. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to enable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure the commutation event in case of use of the Hall sensor interface. + (+) Configure Output channels for OC and PWM mode. + + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master synchronization. + (+) Configure timer remapping capabilities. + (+) Select timer input source. + (+) Enable or disable channel grouping. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the TIM commutation event sequence. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with interrupt. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + /* Enable the Commutation Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with DMA. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @note The user should configure the DMA in his own software, in This function only the COMDE bit is set + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Enable the Commutation DMA Request */ + /* Set the DMA Commutation Callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Enable the Commutation DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in master mode. + * @param htim TIM handle. + * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that + * contains the selected trigger output (TRGO) and the Master/Slave + * mode. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + const TIM_MasterConfigTypeDef *sMasterConfig) +{ + uint32_t tmpcr2; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger)); + assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Change the handler state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* If the timer supports ADC synchronization through TRGO2, set the master mode selection 2 */ + if (IS_TIM_TRGO2_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_TRGO2_SOURCE(sMasterConfig->MasterOutputTrigger2)); + + /* Clear the MMS2 bits */ + tmpcr2 &= ~TIM_CR2_MMS2; + /* Select the TRGO2 source*/ + tmpcr2 |= sMasterConfig->MasterOutputTrigger2; + } + + /* Reset the MMS Bits */ + tmpcr2 &= ~TIM_CR2_MMS; + /* Select the TRGO source */ + tmpcr2 |= sMasterConfig->MasterOutputTrigger; + + /* Update TIMx CR2 */ + htim->Instance->CR2 = tmpcr2; + + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + /* Reset the MSM Bit */ + tmpsmcr &= ~TIM_SMCR_MSM; + /* Set master mode */ + tmpsmcr |= sMasterConfig->MasterSlaveMode; + + /* Update TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + } + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State + * and the AOE(automatic output enable). + * @param htim TIM handle + * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that + * contains the BDTR Register configuration information for the TIM peripheral. + * @note Interrupts can be generated when an active level is detected on the + * break input, the break 2 input or the system break input. Break + * interrupt can be enabled by calling the @ref __HAL_TIM_ENABLE_IT macro. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + const TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig) +{ + /* Keep this variable initialized to 0 as it is used to configure BDTR register */ + uint32_t tmpbdtr = 0U; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode)); + assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode)); + assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel)); + assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime)); + assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState)); + assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity)); + assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->BreakFilter)); + assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput)); + assert_param(IS_TIM_BREAK_AFMODE(sBreakDeadTimeConfig->BreakAFMode)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + + /* Set the BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime); + MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKF, (sBreakDeadTimeConfig->BreakFilter << TIM_BDTR_BKF_Pos)); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKBID, sBreakDeadTimeConfig->BreakAFMode); + + if (IS_TIM_BKIN2_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_BREAK2_STATE(sBreakDeadTimeConfig->Break2State)); + assert_param(IS_TIM_BREAK2_POLARITY(sBreakDeadTimeConfig->Break2Polarity)); + assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->Break2Filter)); + assert_param(IS_TIM_BREAK2_AFMODE(sBreakDeadTimeConfig->Break2AFMode)); + + /* Set the BREAK2 input related BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2F, (sBreakDeadTimeConfig->Break2Filter << TIM_BDTR_BK2F_Pos)); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2E, sBreakDeadTimeConfig->Break2State); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2P, sBreakDeadTimeConfig->Break2Polarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2BID, sBreakDeadTimeConfig->Break2AFMode); + } + + /* Set TIMx_BDTR */ + htim->Instance->BDTR = tmpbdtr; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the break input source. + * @param htim TIM handle. + * @param BreakInput Break input to configure + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @param sBreakInputConfig Break input source configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, + uint32_t BreakInput, + const TIMEx_BreakInputConfigTypeDef *sBreakInputConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmporx; + uint32_t bkin_enable_mask; + uint32_t bkin_polarity_mask; + uint32_t bkin_enable_bitpos; + uint32_t bkin_polarity_bitpos; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + assert_param(IS_TIM_BREAKINPUTSOURCE(sBreakInputConfig->Source)); + assert_param(IS_TIM_BREAKINPUTSOURCE_STATE(sBreakInputConfig->Enable)); + assert_param(IS_TIM_BREAKINPUTSOURCE_POLARITY(sBreakInputConfig->Polarity)); + + /* Check input state */ + __HAL_LOCK(htim); + + switch (sBreakInputConfig->Source) + { + case TIM_BREAKINPUTSOURCE_BKIN: + { + bkin_enable_mask = TIM1_AF1_BKINE; + bkin_enable_bitpos = TIM1_AF1_BKINE_Pos; + bkin_polarity_mask = TIM1_AF1_BKINP; + bkin_polarity_bitpos = TIM1_AF1_BKINP_Pos; + break; + } +#if defined(COMP1) && defined(COMP2) + case TIM_BREAKINPUTSOURCE_COMP1: + { + bkin_enable_mask = TIM1_AF1_BKCMP1E; + bkin_enable_bitpos = TIM1_AF1_BKCMP1E_Pos; + bkin_polarity_mask = TIM1_AF1_BKCMP1P; + bkin_polarity_bitpos = TIM1_AF1_BKCMP1P_Pos; + break; + } + case TIM_BREAKINPUTSOURCE_COMP2: + { + bkin_enable_mask = TIM1_AF1_BKCMP2E; + bkin_enable_bitpos = TIM1_AF1_BKCMP2E_Pos; + bkin_polarity_mask = TIM1_AF1_BKCMP2P; + bkin_polarity_bitpos = TIM1_AF1_BKCMP2P_Pos; + break; + } +#endif /* COMP1 && COMP2 */ +#if defined(COMP3) + case TIM_BREAKINPUTSOURCE_COMP3: + { + bkin_enable_mask = TIM1_AF1_BKCMP3E; + bkin_enable_bitpos = TIM1_AF1_BKCMP3E_Pos; + bkin_polarity_mask = TIM1_AF1_BKCMP3P; + bkin_polarity_bitpos = TIM1_AF1_BKCMP3P_Pos; + break; + } +#endif /* COMP3 */ + + default: + { + bkin_enable_mask = 0U; + bkin_polarity_mask = 0U; + bkin_enable_bitpos = 0U; + bkin_polarity_bitpos = 0U; + break; + } + } + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Get the TIMx_AF1 register value */ + tmporx = htim->Instance->AF1; + + /* Enable the break input */ + tmporx &= ~bkin_enable_mask; + tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask; + + /* Set the break input polarity */ + tmporx &= ~bkin_polarity_mask; + tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask; + + /* Set TIMx_AF1 */ + htim->Instance->AF1 = tmporx; + break; + } + case TIM_BREAKINPUT_BRK2: + { + /* Get the TIMx_AF2 register value */ + tmporx = htim->Instance->AF2; + + /* Enable the break input */ + tmporx &= ~bkin_enable_mask; + tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask; + + /* Set the break input polarity */ + tmporx &= ~bkin_polarity_mask; + tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask; + + /* Set TIMx_AF2 */ + htim->Instance->AF2 = tmporx; + break; + } + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Configures the TIMx Remapping input capabilities. + * @param htim TIM handle. + * @param Remap specifies the TIM remapping source. + * For TIM1, the parameter can take one of the following values: + * @arg TIM_TIM1_ETR_GPIO: TIM1 ETR is is connected to GPIO + * @arg TIM_TIM1_ETR_COMP1: TIM1 ETR is connected to COMP1 output + * @arg TIM_TIM1_ETR_COMP2: TIM1 ETR is connected to COMP2 output + * @arg TIM_TIM1_ETR_COMP3: TIM1 ETR is connected to COMP3 output (**) + * @arg TIM_TIM1_ETR_ADC1_AWD1: TIM1 ETR is connected to ADC1 AWD1 + * @arg TIM_TIM1_ETR_ADC1_AWD2: TIM1 ETR is connected to ADC1 AWD2 + * @arg TIM_TIM1_ETR_ADC1_AWD3: TIM1 ETR is connected to ADC1 AWD3 + * + * For TIM2, the parameter can take one of the following values: (*) + * @arg TIM_TIM2_ETR_GPIO: TIM2_ETR is connected to GPIO + * @arg TIM_TIM2_ETR_COMP1: TIM2_ETR is connected to COMP1 output + * @arg TIM_TIM2_ETR_COMP2: TIM2_ETR is connected to COMP2 output + * @arg TIM_TIM2_ETR_COMP3: TIM2_ETR is connected to COMP3 output (**) + * @arg TIM_TIM2_ETR_LSE: TIM2_ETR is connected to LSE + * @arg TIM_TIM2_ETR_MCO: TIM2_ETR is connected to MCO (**) + * @arg TIM_TIM2_ETR_MCO2: TIM2_ETR is connected to MCO2 (**) + * + * For TIM3, the parameter can take one of the following values: + * @arg TIM_TIM3_ETR_GPIO TIM3_ETR is connected to GPIO + * @arg TIM_TIM3_ETR_COMP1 TIM3_ETR is connected to COMP1 output + * @arg TIM_TIM3_ETR_COMP2 TIM3_ETR is connected to COMP2 output + * @arg TIM_TIM3_ETR_COMP3 TIM3_ETR is connected to COMP3 output (**) + * + * For TIM4, the parameter can take one of the following values:(*) + * @arg TIM_TIM4_ETR_GPIO TIM4_ETR is connected to GPIO + * @arg TIM_TIM4_ETR_COMP1 TIM4_ETR is connected to COMP1 output + * @arg TIM_TIM4_ETR_COMP2 TIM4_ETR is connected to COMP2 output + * @arg TIM_TIM4_ETR_COMP3 TIM4_ETR is connected to COMP3 output (**) + * + * (*) Timer instance not available on all devices \n + * (**) Value not defined in all devices. \n + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) +{ + /* Check parameters */ + assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance)); + assert_param(IS_TIM_REMAP(Remap)); + + __HAL_LOCK(htim); + + MODIFY_REG(htim->Instance->AF1, TIM1_AF1_ETRSEL_Msk, Remap); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Select the timer input source + * @param htim TIM handle. + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TI1 input channel + * @arg TIM_CHANNEL_2: TI2 input channel + * @arg TIM_CHANNEL_3: TI3 input channel + * @param TISelection specifies the timer input source + * + * For TIM1 this parameter can be one of the following values: + * @arg TIM_TIM1_TI1_GPIO: TIM1 TI1 is connected to GPIO + * @arg TIM_TIM1_TI1_COMP1: TIM1 TI1 is connected to COMP1 output + * @arg TIM_TIM1_TI2_GPIO: TIM1 TI2 is connected to GPIO + * @arg TIM_TIM1_TI2_COMP2: TIM1 TI2 is connected to COMP2 output + * @arg TIM_TIM1_TI3_GPIO: TIM1 TI3 is connected to GPIO + * @arg TIM_TIM1_TI3_COMP3: TIM1 TI3 is connected to COMP3 output (**) + * + * For TIM2, the parameter is one of the following values: (*) + * @arg TIM_TIM2_TI1_GPIO: TIM2 TI1 is connected to GPIO + * @arg TIM_TIM2_TI1_COMP1: TIM2 TI1 is connected to COMP1 output + * @arg TIM_TIM2_TI2_GPIO: TIM2 TI2 is connected to GPIO + * @arg TIM_TIM2_TI2_COMP2: TIM2 TI2 is connected to COMP2 output + * @arg TIM_TIM2_TI3_GPIO: TIM2 TI3 is connected to GPIO + * @arg TIM_TIM2_TI3_COMP3: TIM2 TI3 is connected to COMP3 output (**) + * + * For TIM3, the parameter is one of the following values: + * @arg TIM_TIM3_TI1_GPIO: TIM3 TI1 is connected to GPIO + * @arg TIM_TIM3_TI1_COMP1: TIM3 TI1 is connected to COMP1 output + * @arg TIM_TIM3_TI2_GPIO: TIM3 TI2 is connected to GPIO + * @arg TIM_TIM3_TI2_COMP2: TIM3 TI2 is connected to COMP2 output + * @arg TIM_TIM3_TI3_GPIO: TIM3 TI3 is connected to GPIO + * @arg TIM_TIM3_TI3_COMP3: TIM3 TI3 is connected to COMP3 output (**) + * + * For TIM4, the parameter is one of the following values: (*) + * @arg TIM_TIM4_TI1_GPIO: TIM4 TI1 is connected to GPIO + * @arg TIM_TIM4_TI1_COMP1: TIM4 TI1 is connected to COMP1 output + * @arg TIM_TIM4_TI2_GPIO: TIM4 TI2 is connected to GPIO + * @arg TIM_TIM4_TI2_COMP2: TIM4 TI2 is connected to COMP2 output + * @arg TIM_TIM4_TI3_GPIO: TIM4 TI3 is connected to GPIO + * @arg TIM_TIM4_TI3_COMP3: TIM4 TI3 is connected to COMP3 output + * + * For TIM14, the parameter is one of the following values: + * @arg TIM_TIM14_TI1_GPIO: TIM14 TI1 is connected to GPIO + * @arg TIM_TIM14_TI1_RTC: TIM14 TI1 is connected to RTC clock + * @arg TIM_TIM14_TI1_HSE_32: TIM14 TI1 is connected to HSE div 32 + * @arg TIM_TIM14_TI1_MCO: TIM14 TI1 is connected to MCO + * @arg TIM_TIM14_TI1_MCO2: TIM14 TI1 is connected to MCO2 (**) + * + * For TIM15, the parameter is one of the following values: + * @arg TIM_TIM15_TI1_GPIO: TIM15 TI1 is connected to GPIO + * @arg TIM_TIM15_TI1_TIM2_CH1: TIM15 TI1 is connected to TIM2 CH1 + * @arg TIM_TIM15_TI1_TIM3_CH1: TIM15 TI1 is connected to TIM3 CH1 + * @arg TIM_TIM15_TI2_GPIO: TIM15 TI2 is connected to GPIO + * @arg TIM_TIM15_TI2_TIM2_CH2: TIM15 TI2 is connected to TIM2 CH2 + * @arg TIM_TIM15_TI2_TIM3_CH2: TIM15 TI2 is connected to TIM3 CH2 + * + * For TIM16, the parameter can have the following values: + * @arg TIM_TIM16_TI1_GPIO: TIM16 TI1 is connected to GPIO + * @arg TIM_TIM16_TI1_LSI: TIM16 TI1 is connected to LSI + * @arg TIM_TIM16_TI1_LSE: TIM16 TI1 is connected to LSE + * @arg TIM_TIM16_TI1_RTC_WAKEUP: TIM16 TI1 is connected to TRC wakeup interrupt + * @arg TIM_TIM16_TI1_MCO2: TIM16 TI1 is connected to MCO2 (**) + * + * For TIM17, the parameter can have the following values: + * @arg TIM_TIM17_TI1_GPIO: TIM17 TI1 is connected to GPIO + * @arg TIM_TIM14_TI1_HSI: TIM17 TI1 is connected to HSI (**) + * @arg TIM_TIM17_TI1_HSE_32: TIM17 TI1 is connected to HSE div 32 + * @arg TIM_TIM17_TI1_MCO: TIM17 TI1 is connected to MCO + * @arg TIM_TIM17_TI1_MCO2: TIM17 TI1 is connected to MCO2 (**) + * + * (*) Timer instance not available on all devices \n + * (**) Value not defined in all devices. \n + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_TISelection(TIM_HandleTypeDef *htim, uint32_t TISelection, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_TIM_TISEL_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TISEL(TISelection)); + + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI1SEL, TISelection); + break; + case TIM_CHANNEL_2: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI2SEL, TISelection); + break; + case TIM_CHANNEL_3: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI3SEL, TISelection); + break; + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Group channel 5 and channel 1, 2 or 3 + * @param htim TIM handle. + * @param Channels specifies the reference signal(s) the OC5REF is combined with. + * This parameter can be any combination of the following values: + * TIM_GROUPCH5_NONE: No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC + * TIM_GROUPCH5_OC1REFC: OC1REFC is the logical AND of OC1REFC and OC5REF + * TIM_GROUPCH5_OC2REFC: OC2REFC is the logical AND of OC2REFC and OC5REF + * TIM_GROUPCH5_OC3REFC: OC3REFC is the logical AND of OC3REFC and OC5REF + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels) +{ + /* Check parameters */ + assert_param(IS_TIM_COMBINED3PHASEPWM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_GROUPCH5(Channels)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Clear GC5Cx bit fields */ + htim->Instance->CCR5 &= ~(TIM_CCR5_GC5C3 | TIM_CCR5_GC5C2 | TIM_CCR5_GC5C1); + + /* Set GC5Cx bit fields */ + htim->Instance->CCR5 |= Channels; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Disarm the designated break input (when it operates in bidirectional mode). + * @param htim TIM handle. + * @param BreakInput Break input to disarm + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @note The break input can be disarmed only when it is configured in + * bidirectional mode and when when MOE is reset. + * @note Purpose is to be able to have the input voltage back to high-state, + * whatever the time constant on the output . + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_DisarmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpbdtr; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Check initial conditions */ + tmpbdtr = READ_REG(htim->Instance->BDTR); + if ((READ_BIT(tmpbdtr, TIM_BDTR_BKBID) == TIM_BDTR_BKBID) && + (READ_BIT(tmpbdtr, TIM_BDTR_MOE) == 0U)) + { + /* Break input BRK is disarmed */ + SET_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM); + } + break; + } + case TIM_BREAKINPUT_BRK2: + { + /* Check initial conditions */ + tmpbdtr = READ_REG(htim->Instance->BDTR); + if ((READ_BIT(tmpbdtr, TIM_BDTR_BK2BID) == TIM_BDTR_BK2BID) && + (READ_BIT(tmpbdtr, TIM_BDTR_MOE) == 0U)) + { + /* Break input BRK is disarmed */ + SET_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM); + } + break; + } + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Arm the designated break input (when it operates in bidirectional mode). + * @param htim TIM handle. + * @param BreakInput Break input to arm + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @note Arming is possible at anytime, even if fault is present. + * @note Break input is automatically armed as soon as MOE bit is set. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(const TIM_HandleTypeDef *htim, uint32_t BreakInput) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Check initial conditions */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKBID) == TIM_BDTR_BKBID) + { + /* Break input BRK is re-armed automatically by hardware. Poll to check whether fault condition disappeared */ + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + while (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM) != 0UL) + { + if ((HAL_GetTick() - tickstart) > TIM_BREAKINPUT_REARM_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM) != 0UL) + { + return HAL_TIMEOUT; + } + } + } + } + break; + } + + case TIM_BREAKINPUT_BRK2: + { + /* Check initial conditions */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2BID) == TIM_BDTR_BK2BID) + { + /* Break input BRK2 is re-armed automatically by hardware. Poll to check whether fault condition disappeared */ + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + while (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM) != 0UL) + { + if ((HAL_GetTick() - tickstart) > TIM_BREAKINPUT_REARM_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM) != 0UL) + { + return HAL_TIMEOUT; + } + } + } + } + break; + } + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * +@verbatim + ============================================================================== + ##### Extended Callbacks functions ##### + ============================================================================== + [..] + This section provides Extended TIM callback functions: + (+) Timer Commutation callback + (+) Timer Break callback + +@endverbatim + * @{ + */ + +/** + * @brief Commutation callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutCallback could be implemented in the user file + */ +} +/** + * @brief Commutation half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Break detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_BreakCallback could be implemented in the user file + */ +} + +/** + * @brief Break2 detection callback in non blocking mode + * @param htim: TIM handle + * @retval None + */ +__weak void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIMEx_Break2Callback could be implemented in the user file + */ +} +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * +@verbatim + ============================================================================== + ##### Extended Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Hall Sensor interface handle state. + * @param htim TIM Hall Sensor handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return actual state of the TIM complementary channel. + * @param htim TIM handle + * @param ChannelN TIM Complementary channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @retval TIM Complementary channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(const TIM_HandleTypeDef *htim, uint32_t ChannelN) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, ChannelN)); + + channel_state = TIM_CHANNEL_N_STATE_GET(htim, ChannelN); + + return channel_state; +} +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Functions TIM Extended Private Functions + * @{ + */ + +/** + * @brief TIM DMA Commutation callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Commutation half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationHalfCpltCallback(htim); +#else + HAL_TIMEx_CommutHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + + +/** + * @brief TIM DMA Delay Pulse complete callback (complementary channel). + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA error callback (complementary channel) + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel xN. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @param ChannelNState specifies the TIM Channel CCxNE bit new state. + * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable. + * @retval None + */ +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState) +{ + uint32_t tmp; + + tmp = TIM_CCER_CC1NE << (Channel & 0xFU); /* 0xFU = 15 bits max shift */ + + /* Reset the CCxNE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxNE Bit */ + TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0xFU)); /* 0xFU = 15 bits max shift */ +} +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart.c new file mode 100644 index 0000000..292c78f --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart.c @@ -0,0 +1,4762 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_uart.c + * @author MCD Application Team + * @brief UART HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The UART HAL driver can be used as follows: + + (#) Declare a UART_HandleTypeDef handle structure (eg. UART_HandleTypeDef huart). + (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API: + (++) Enable the USARTx interface clock. + (++) UART pins configuration: + (+++) Enable the clock for the UART GPIOs. + (+++) Configure these UART pins as alternate function pull-up. + (++) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT() + and HAL_UART_Receive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (++) UART interrupts handling: + -@@- The specific UART interrupts (Transmission complete interrupt, + RXNE interrupt, RX/TX FIFOs related interrupts and Error Interrupts) + are managed using the macros __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() + inside the transmit and receive processes. + (++) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA() + and HAL_UART_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Prescaler value , Hardware + flow control and Mode (Receiver/Transmitter) in the huart handle Init structure. + + (#) If required, program UART advanced features (TX/RX pins swap, auto Baud rate detection,...) + in the huart handle AdvancedInit structure. + + (#) For the UART asynchronous mode, initialize the UART registers by calling + the HAL_UART_Init() API. + + (#) For the UART Half duplex mode, initialize the UART registers by calling + the HAL_HalfDuplex_Init() API. + + (#) For the UART LIN (Local Interconnection Network) mode, initialize the UART registers + by calling the HAL_LIN_Init() API. + + (#) For the UART Multiprocessor mode, initialize the UART registers + by calling the HAL_MultiProcessor_Init() API. + + (#) For the UART RS485 Driver Enabled mode, initialize the UART registers + by calling the HAL_RS485Ex_Init() API. + + [..] + (@) These API's (HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init(), HAL_MultiProcessor_Init(), + also configure the low level Hardware GPIO, CLOCK, CORTEX...etc) by + calling the customized HAL_UART_MspInit() API. + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_UART_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_UART_RegisterCallback() to register a user callback. + Function HAL_UART_RegisterCallback() allows to register following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) WakeupCallback : Wakeup Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_UART_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_UART_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) WakeupCallback : Wakeup Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + + [..] + For specific callback RxEventCallback, use dedicated registration/reset functions: + respectively HAL_UART_RegisterRxEventCallback() , HAL_UART_UnRegisterRxEventCallback(). + + [..] + By default, after the HAL_UART_Init() and when the state is HAL_UART_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_UART_TxCpltCallback(), HAL_UART_RxHalfCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak functions in the HAL_UART_Init() + and HAL_UART_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_UART_Init() and HAL_UART_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_UART_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_UART_STATE_READY or HAL_UART_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_UART_RegisterCallback() before calling HAL_UART_DeInit() + or HAL_UART_Init() function. + + [..] + When The compilation define USE_HAL_UART_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak callbacks are used. + + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup UART UART + * @brief HAL UART module driver + * @{ + */ + +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup UART_Private_Constants UART Private Constants + * @{ + */ +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE | \ + USART_CR1_OVER8 | USART_CR1_FIFOEN)) /*!< UART or USART CR1 fields of parameters set by UART_SetConfig API */ + +#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE | USART_CR3_ONEBIT | USART_CR3_TXFTCFG | \ + USART_CR3_RXFTCFG)) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */ + +#define LPUART_BRR_MIN 0x00000300U /* LPUART BRR minimum authorized value */ +#define LPUART_BRR_MAX 0x000FFFFFU /* LPUART BRR maximum authorized value */ + +#define UART_BRR_MIN 0x10U /* UART BRR minimum authorized value */ +#define UART_BRR_MAX 0x0000FFFFU /* UART BRR maximum authorized value */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup UART_Private_Functions + * @{ + */ +static void UART_EndRxTransfer(UART_HandleTypeDef *huart); +static void UART_EndTxTransfer(UART_HandleTypeDef *huart); +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAError(DMA_HandleTypeDef *hdma); +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_TxISR_8BIT(UART_HandleTypeDef *huart); +static void UART_TxISR_16BIT(UART_HandleTypeDef *huart); +static void UART_TxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_TxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_EndTransmit_IT(UART_HandleTypeDef *huart); +static void UART_RxISR_8BIT(UART_HandleTypeDef *huart); +static void UART_RxISR_16BIT(UART_HandleTypeDef *huart); +static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart); +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @addtogroup UART_Private_variables + * @{ + */ +const uint16_t UARTPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; +/** + * @} + */ + +/* Exported Constants --------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode the parameters below can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + (++) One-Bit Sampling Method + (+) For the asynchronous mode, the following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) auto Baud rate detection + [..] + The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init()and HAL_MultiProcessor_Init()API + follow respectively the UART asynchronous, UART Half duplex, UART LIN mode + and UART multiprocessor mode configuration procedures (details for the procedures + are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible UART formats are listed in the + following table. + + Table 1. UART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | UART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the UART mode according to the specified + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + if (huart->Init.HwFlowCtl != UART_HWCONTROL_NONE) + { + /* Check the parameters */ + assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance)); + } + else + { + /* Check the parameters */ + assert_param((IS_UART_INSTANCE(huart->Instance)) || (IS_LPUART_INSTANCE(huart->Instance))); + } + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In asynchronous mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Initialize the half-duplex mode according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check UART instance */ + assert_param(IS_UART_HALFDUPLEX_INSTANCE(huart->Instance)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In half-duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief Initialize the LIN mode according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @param BreakDetectLength Specifies the LIN break detection length. + * This parameter can be one of the following values: + * @arg @ref UART_LINBREAKDETECTLENGTH_10B 10-bit break detection + * @arg @ref UART_LINBREAKDETECTLENGTH_11B 11-bit break detection + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the LIN UART instance */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + /* Check the Break detection length parameter */ + assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength)); + + /* LIN mode limited to 16-bit oversampling only */ + if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + return HAL_ERROR; + } + /* LIN mode limited to 8-bit data length */ + if (huart->Init.WordLength != UART_WORDLENGTH_8B) + { + return HAL_ERROR; + } + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In LIN mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ + SET_BIT(huart->Instance->CR2, USART_CR2_LINEN); + + /* Set the USART LIN Break detection length. */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_LBDL, BreakDetectLength); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief Initialize the multiprocessor mode according to the specified + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @param Address UART node address (4-, 6-, 7- or 8-bit long). + * @param WakeUpMethod Specifies the UART wakeup method. + * This parameter can be one of the following values: + * @arg @ref UART_WAKEUPMETHOD_IDLELINE WakeUp by an idle line detection + * @arg @ref UART_WAKEUPMETHOD_ADDRESSMARK WakeUp by an address mark + * @note If the user resorts to idle line detection wake up, the Address parameter + * is useless and ignored by the initialization function. + * @note If the user resorts to address mark wake up, the address length detection + * is configured by default to 4 bits only. For the UART to be able to + * manage 6-, 7- or 8-bit long addresses detection, the API + * HAL_MultiProcessorEx_AddressLength_Set() must be called after + * HAL_MultiProcessor_Init(). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the wake up method parameter */ + assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In multiprocessor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register. */ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + if (WakeUpMethod == UART_WAKEUPMETHOD_ADDRESSMARK) + { + /* If address mark wake up method is chosen, set the USART address node */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)Address << UART_CR2_ADDRESS_LSB_POS)); + } + + /* Set the wake up method by setting the WAKE bit in the CR1 register */ + MODIFY_REG(huart->Instance->CR1, USART_CR1_WAKE, WakeUpMethod); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief DeInitialize the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param((IS_UART_INSTANCE(huart->Instance)) || (IS_LPUART_INSTANCE(huart->Instance))); + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + huart->Instance->CR1 = 0x0U; + huart->Instance->CR2 = 0x0U; + huart->Instance->CR3 = 0x0U; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + if (huart->MspDeInitCallback == NULL) + { + huart->MspDeInitCallback = HAL_UART_MspDeInit; + } + /* DeInit the low level hardware */ + huart->MspDeInitCallback(huart); +#else + /* DeInit the low level hardware */ + HAL_UART_MspDeInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_RESET; + huart->RxState = HAL_UART_STATE_RESET; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Initialize the UART MSP. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_MspInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the UART MSP. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User UART Callback + * To be used to override the weak predefined callback + * @note The HAL_UART_RegisterCallback() may be called before HAL_UART_Init(), HAL_HalfDuplex_Init(), + * HAL_LIN_Init(), HAL_MultiProcessor_Init() or HAL_RS485Ex_Init() in HAL_UART_STATE_RESET to register + * callbacks for HAL_UART_MSPINIT_CB_ID and HAL_UART_MSPDEINIT_CB_ID + * @param huart uart handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID + * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (huart->gState == HAL_UART_STATE_READY) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = pCallback; + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = pCallback; + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = pCallback; + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = pCallback; + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = pCallback; + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = pCallback; + break; + + case HAL_UART_WAKEUP_CB_ID : + huart->WakeupCallback = pCallback; + break; + + case HAL_UART_RX_FIFO_FULL_CB_ID : + huart->RxFifoFullCallback = pCallback; + break; + + case HAL_UART_TX_FIFO_EMPTY_CB_ID : + huart->TxFifoEmptyCallback = pCallback; + break; + + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else if (huart->gState == HAL_UART_STATE_RESET) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an UART Callback + * UART callaback is redirected to the weak predefined callback + * @note The HAL_UART_UnRegisterCallback() may be called before HAL_UART_Init(), HAL_HalfDuplex_Init(), + * HAL_LIN_Init(), HAL_MultiProcessor_Init() or HAL_RS485Ex_Init() in HAL_UART_STATE_RESET to un-register + * callbacks for HAL_UART_MSPINIT_CB_ID and HAL_UART_MSPDEINIT_CB_ID + * @param huart uart handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID + * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_UART_STATE_READY == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak + AbortTransmitCpltCallback */ + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak + AbortReceiveCpltCallback */ + break; + + case HAL_UART_WAKEUP_CB_ID : + huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ + break; + + case HAL_UART_RX_FIFO_FULL_CB_ID : + huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + break; + + case HAL_UART_TX_FIFO_EMPTY_CB_ID : + huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + break; + + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else if (HAL_UART_STATE_RESET == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register a User UART Rx Event Callback + * To be used instead of the weak predefined callback + * @param huart Uart handle + * @param pCallback Pointer to the Rx Event Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (huart->RxState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = pCallback; + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the UART Rx Event Callback + * UART Rx Event Callback is redirected to the weak HAL_UARTEx_RxEventCallback() predefined callback + * @param huart Uart handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (huart->RxState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak UART Rx Event Callback */ + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group2 IO operation functions + * @brief UART Transmit/Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of functions allowing to manage the UART asynchronous + and Half duplex data transfers. + + (#) There are two mode of transfer: + (+) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (+) Non-Blocking mode: The communication is performed using Interrupts + or DMA, These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a communication error is detected + + (#) Blocking mode API's are : + (+) HAL_UART_Transmit() + (+) HAL_UART_Receive() + + (#) Non-Blocking mode API's with Interrupt are : + (+) HAL_UART_Transmit_IT() + (+) HAL_UART_Receive_IT() + (+) HAL_UART_IRQHandler() + + (#) Non-Blocking mode API's with DMA are : + (+) HAL_UART_Transmit_DMA() + (+) HAL_UART_Receive_DMA() + (+) HAL_UART_DMAPause() + (+) HAL_UART_DMAResume() + (+) HAL_UART_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in Non_Blocking mode: + (+) HAL_UART_TxHalfCpltCallback() + (+) HAL_UART_TxCpltCallback() + (+) HAL_UART_RxHalfCpltCallback() + (+) HAL_UART_RxCpltCallback() + (+) HAL_UART_ErrorCallback() + + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (+) HAL_UART_Abort() + (+) HAL_UART_AbortTransmit() + (+) HAL_UART_AbortReceive() + (+) HAL_UART_Abort_IT() + (+) HAL_UART_AbortTransmit_IT() + (+) HAL_UART_AbortReceive_IT() + + (#) For Abort services based on interrupts (HAL_UART_Abortxxx_IT), a set of Abort Complete Callbacks are provided: + (+) HAL_UART_AbortCpltCallback() + (+) HAL_UART_AbortTransmitCpltCallback() + (+) HAL_UART_AbortReceiveCpltCallback() + + (#) A Rx Event Reception Callback (Rx event notification) is available for Non_Blocking modes of enhanced + reception services: + (+) HAL_UARTEx_RxEventCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (+) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error + in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user + to identify error type, and HAL_UART_ErrorCallback() user callback is executed. + Transfer is kept ongoing on UART side. + If user wants to abort it, Abort services should be called by user. + (+) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, and HAL_UART_ErrorCallback() + user callback is executed. + + -@- In the Half duplex communication, it is forbidden to run the transmit + and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX can't be useful. + +@endverbatim + * @{ + */ + +/** + * @brief Send an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When FIFO mode is enabled, writing a data in the TDR register adds one + * data to the TXFIFO. Write operations to the TDR register are performed + * when TXFNF flag is set. From hardware perspective, TXFNF flag and + * TXE are mapped on the same bit-field. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + const uint8_t *pdata8bits; + const uint16_t *pdata16bits; + uint32_t tickstart; + + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (const uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + while (huart->TxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + + huart->gState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + huart->Instance->TDR = (uint16_t)(*pdata16bits & 0x01FFU); + pdata16bits++; + } + else + { + huart->Instance->TDR = (uint8_t)(*pdata8bits & 0xFFU); + pdata8bits++; + } + huart->TxXferCount--; + } + + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + { + huart->gState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + uhMask = huart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + huart->RxXferCount--; + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + huart->TxISR = NULL; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Configure Tx interrupt processing */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->TxISR = UART_TxISR_16BIT_FIFOEN; + } + else + { + huart->TxISR = UART_TxISR_8BIT_FIFOEN; + } + + /* Enable the TX FIFO threshold interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + } + else + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->TxISR = UART_TxISR_16BIT; + } + else + { + huart->TxISR = UART_TxISR_8BIT; + } + + /* Enable the Transmit Data Register Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + return (UART_Start_Receive_IT(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy into TDR will be + handled by DMA from a u16 frontier. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + if (huart->hdmatx != NULL) + { + /* Set the UART DMA transfer complete callback */ + huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmatx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmatx->XferAbortCallback = NULL; + + /* Enable the UART transmit DMA channel */ + if (HAL_DMA_Start_IT(huart->hdmatx, (uint32_t)huart->pTxBuffPtr, (uint32_t)&huart->Instance->TDR, Size) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + /* Restore huart->gState to ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + } + /* Clear the TC flag in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_TCF); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the UART CR3 register */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy from RDR will be + handled by DMA from a u16 frontier. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + return (UART_Start_Receive_DMA(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pause the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) +{ + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + /* Disable the UART DMA Tx request */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the UART DMA Rx request */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) +{ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + /* Enable the UART DMA Tx request */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + /* Clear the Overrun flag before resuming the Rx transfer */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the UART DMA Rx request */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback() / + HAL_UART_TxHalfCpltCallback / HAL_UART_RxHalfCpltCallback: + indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete + interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of + the stream and the corresponding call back is executed. */ + + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + /* Stop UART DMA Tx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel */ + if (huart->hdmatx != NULL) + { + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if (huart->hdmarx != NULL) + { + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + UART_EndRxTransfer(huart); + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) +{ + /* Disable TXE, TC, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | + USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the UART DMA Tx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart) +{ + /* Disable TCIE, TXEIE and TXFTIE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the UART DMA Tx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) +{ + /* Disable PEIE, EIE, RXNEIE and RXFTIE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) +{ + uint32_t abortcplt = 1U; + + /* Disable interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_TCIE | USART_CR1_RXNEIE_RXFNEIE | + USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* If DMA Tx and/or DMA Rx Handles are associated to UART Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (huart->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + huart->hdmatx->XferAbortCallback = UART_DMATxAbortCallback; + } + else + { + huart->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (huart->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + huart->hdmarx->XferAbortCallback = UART_DMARxAbortCallback; + } + else + { + huart->hdmarx->XferAbortCallback = NULL; + } + } + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at UART level */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmatx != NULL) + { + /* UART Tx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + huart->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmarx != NULL) + { + /* UART Rx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + huart->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + huart->TxISR = NULL; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the UART DMA Tx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = UART_DMATxOnlyAbortCallback; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + /* Call Directly huart->hdmatx->XferAbortCallback function in case of error */ + huart->hdmatx->XferAbortCallback(huart->hdmatx); + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + huart->TxISR = NULL; + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + huart->TxISR = NULL; + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMARxOnlyAbortCallback; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + huart->pRxBuffPtr = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + huart->pRxBuffPtr = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Handle UART interrupt request. + * @param huart UART handle. + * @retval None + */ +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) +{ + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF)); + if (errorflags == 0U) + { + /* UART in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (huart->RxISR != NULL) + { + huart->RxISR(huart); + } + return; + } + } + + /* If some errors occur */ + if ((errorflags != 0U) + && ((((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE)) != 0U)))) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* UART Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) || + ((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U))) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + huart->ErrorCode |= HAL_UART_ERROR_ORE; + } + + /* UART Receiver Timeout interrupt occurred ---------------------------------*/ + if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + huart->ErrorCode |= HAL_UART_ERROR_RTO; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* UART in mode Receiver --------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (huart->RxISR != NULL) + { + huart->RxISR(huart); + } + } + + /* If Error is to be considered as blocking : + - Receiver Timeout error in Reception + - Overrun error in Reception + - any error occurs in DMA mode reception + */ + errorcode = huart->ErrorCode; + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) || + ((errorcode & (HAL_UART_ERROR_RTO | HAL_UART_ERROR_ORE)) != 0U)) + { + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ + UART_EndRxTransfer(huart); + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_ErrorCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if ((huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + && ((isrflags & USART_ISR_IDLE) != 0U) + && ((cr1its & USART_ISR_IDLE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + + /* Check if DMA mode is enabled in UART */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* DMA mode enabled */ + /* Check received length : If all expected data are received, do nothing, + (DMA cplt callback will be called). + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_remaining_rx_data = (uint16_t) __HAL_DMA_GET_COUNTER(huart->hdmarx); + if ((nb_remaining_rx_data > 0U) + && (nb_remaining_rx_data < huart->RxXferSize)) + { + /* Reception is not complete */ + huart->RxXferCount = nb_remaining_rx_data; + + /* In Normal mode, end DMA xfer and HAL UART Rx process*/ + if (HAL_IS_BIT_CLR(huart->hdmarx->Instance->CCR, DMA_CCR_CIRC)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + /* Last bytes received, so no need as the abort is immediate */ + (void)HAL_DMA_Abort(huart->hdmarx); + } + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Idle Event */ + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + return; + } + else + { + /* DMA mode not enabled */ + /* Check received length : If all expected data are received, do nothing. + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_rx_data = huart->RxXferSize - huart->RxXferCount; + if ((huart->RxXferCount > 0U) + && (nb_rx_data > 0U)) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt:(Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Idle Event */ + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxEventCallback(huart, nb_rx_data); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, nb_rx_data); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + return; + } + } + + /* UART wakeup from Stop mode interrupt occurred ---------------------------*/ + if (((isrflags & USART_ISR_WUF) != 0U) && ((cr3its & USART_CR3_WUFIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_WUF); + + /* UART Rx state is not reset as a reception process might be ongoing. + If UART handle state fields need to be reset to READY, this could be done in Wakeup callback */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Wakeup Callback */ + huart->WakeupCallback(huart); +#else + /* Call legacy weak Wakeup Callback */ + HAL_UARTEx_WakeupCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } + + /* UART in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) + && (((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U) + || ((cr3its & USART_CR3_TXFTIE) != 0U))) + { + if (huart->TxISR != NULL) + { + huart->TxISR(huart); + } + return; + } + + /* UART in mode Transmitter (transmission end) -----------------------------*/ + if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) + { + UART_EndTransmit_IT(huart); + return; + } + + /* UART TX Fifo Empty occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_TXFE) != 0U) && ((cr1its & USART_CR1_TXFEIE) != 0U)) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Fifo Empty Callback */ + huart->TxFifoEmptyCallback(huart); +#else + /* Call legacy weak Tx Fifo Empty Callback */ + HAL_UARTEx_TxFifoEmptyCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } + + /* UART RX Fifo Full occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_RXFF) != 0U) && ((cr1its & USART_CR1_RXFFIE) != 0U)) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Fifo Full Callback */ + huart->RxFifoFullCallback(huart); +#else + /* Call legacy weak Rx Fifo Full Callback */ + HAL_UARTEx_RxFifoFullCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_TxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_RxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART error callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortTransmitCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Receive Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortReceiveCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Reception Event Callback (Rx event notification called after use of advanced reception service). + * @param huart UART handle + * @param Size Number of data available in application reception buffer (indicates a position in + * reception buffer until which, data are available) + * @retval None + */ +__weak void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + UNUSED(Size); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_RxEventCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions + * @brief UART control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the UART. + (+) HAL_UART_ReceiverTimeout_Config() API allows to configure the receiver timeout value on the fly + (+) HAL_UART_EnableReceiverTimeout() API enables the receiver timeout feature + (+) HAL_UART_DisableReceiverTimeout() API disables the receiver timeout feature + (+) HAL_MultiProcessor_EnableMuteMode() API enables mute mode + (+) HAL_MultiProcessor_DisableMuteMode() API disables mute mode + (+) HAL_MultiProcessor_EnterMuteMode() API enters mute mode + (+) UART_SetConfig() API configures the UART peripheral + (+) UART_AdvFeatureConfig() API optionally configures the UART advanced features + (+) UART_CheckIdleState() API ensures that TEACK and/or REACK are set after initialization + (+) HAL_HalfDuplex_EnableTransmitter() API disables receiver and enables transmitter + (+) HAL_HalfDuplex_EnableReceiver() API disables transmitter and enables receiver + (+) HAL_LIN_SendBreak() API transmits the break characters +@endverbatim + * @{ + */ + +/** + * @brief Update on the fly the receiver timeout value in RTOR register. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param TimeoutValue receiver timeout value in number of baud blocks. The timeout + * value must be less or equal to 0x0FFFFFFFF. + * @retval None + */ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + assert_param(IS_UART_RECEIVER_TIMEOUT_VALUE(TimeoutValue)); + MODIFY_REG(huart->Instance->RTOR, USART_RTOR_RTO, TimeoutValue); + } +} + +/** + * @brief Enable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Set the USART RTOEN bit */ + SET_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Disable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear the USART RTOEN bit */ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enable UART in mute mode (does not mean UART enters mute mode; + * to enter mute mode, HAL_MultiProcessor_EnterMuteMode() API must be called). + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Enable USART mute mode by setting the MME bit in the CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_MME); + + huart->gState = HAL_UART_STATE_READY; + + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Disable UART mute mode (does not mean the UART actually exits mute mode + * as it may not have been in mute mode at this very moment). + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable USART mute mode by clearing the MME bit in the CR1 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_MME); + + huart->gState = HAL_UART_STATE_READY; + + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Enter UART mute mode (means UART actually enters mute mode). + * @note To exit from mute mode, HAL_MultiProcessor_DisableMuteMode() API must be called. + * @param huart UART handle. + * @retval None + */ +void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_UART_SEND_REQ(huart, UART_MUTE_MODE_REQUEST); +} + +/** + * @brief Enable the UART transmitter and disable the UART receiver. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear TE and RE bits */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TE); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enable the UART receiver and disable the UART transmitter. + * @param huart UART handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear TE and RE bits */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RE); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + + +/** + * @brief Transmit break characters. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) +{ + /* Check the parameters */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Send break characters */ + __HAL_UART_SEND_REQ(huart, UART_SENDBREAK_REQUEST); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Error functions + * @brief UART Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Error functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to : + (+) Return the UART handle state. + (+) Return the UART handle error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the UART handle state. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval HAL state + */ +HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart) +{ + uint32_t temp1; + uint32_t temp2; + temp1 = huart->gState; + temp2 = huart->RxState; + + return (HAL_UART_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the UART handle error code. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval UART Error Code + */ +uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart) +{ + return huart->ErrorCode; +} +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup UART_Private_Functions UART Private Functions + * @{ + */ + +/** + * @brief Initialize the callbacks to their default values. + * @param huart UART handle. + * @retval none + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart) +{ + /* Init the UART Callback settings */ + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ + huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ + huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak RxEventCallback */ + +} +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @brief Configure the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) +{ + uint32_t tmpreg; + uint16_t brrtemp; + UART_ClockSourceTypeDef clocksource; + uint32_t usartdiv; + HAL_StatusTypeDef ret = HAL_OK; + uint32_t lpuart_ker_ck_pres; + uint32_t pclk; + + /* Check the parameters */ + assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate)); + assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); + if (UART_INSTANCE_LOWPOWER(huart)) + { + assert_param(IS_LPUART_STOPBITS(huart->Init.StopBits)); + } + else + { + assert_param(IS_UART_STOPBITS(huart->Init.StopBits)); + assert_param(IS_UART_ONE_BIT_SAMPLE(huart->Init.OneBitSampling)); + } + + assert_param(IS_UART_PARITY(huart->Init.Parity)); + assert_param(IS_UART_MODE(huart->Init.Mode)); + assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl)); + assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); + assert_param(IS_UART_PRESCALER(huart->Init.ClockPrescaler)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Clear M, PCE, PS, TE, RE and OVER8 bits and configure + * the UART Word Length, Parity, Mode and oversampling: + * set the M bits according to huart->Init.WordLength value + * set PCE and PS bits according to huart->Init.Parity value + * set TE and RE bits according to huart->Init.Mode value + * set OVER8 bit according to huart->Init.OverSampling value */ + tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling ; + MODIFY_REG(huart->Instance->CR1, USART_CR1_FIELDS, tmpreg); + + /*-------------------------- USART CR2 Configuration -----------------------*/ + /* Configure the UART Stop Bits: Set STOP[13:12] bits according + * to huart->Init.StopBits value */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + /* Configure + * - UART HardWare Flow Control: set CTSE and RTSE bits according + * to huart->Init.HwFlowCtl value + * - one-bit sampling method versus three samples' majority rule according + * to huart->Init.OneBitSampling (not applicable to LPUART) */ + tmpreg = (uint32_t)huart->Init.HwFlowCtl; + + if (!(UART_INSTANCE_LOWPOWER(huart))) + { + tmpreg |= huart->Init.OneBitSampling; + } + MODIFY_REG(huart->Instance->CR3, USART_CR3_FIELDS, tmpreg); + + /*-------------------------- USART PRESC Configuration -----------------------*/ + /* Configure + * - UART Clock Prescaler : set PRESCALER according to huart->Init.ClockPrescaler value */ + MODIFY_REG(huart->Instance->PRESC, USART_PRESC_PRESCALER, huart->Init.ClockPrescaler); + + /*-------------------------- USART BRR Configuration -----------------------*/ + UART_GETCLOCKSOURCE(huart, clocksource); + + /* Check LPUART instance */ + if (UART_INSTANCE_LOWPOWER(huart)) + { + /* Retrieve frequency clock */ + switch (clocksource) + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + break; + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + /* If proper clock source reported */ + if (pclk != 0U) + { + /* Compute clock after Prescaler */ + lpuart_ker_ck_pres = (pclk / UARTPrescTable[huart->Init.ClockPrescaler]); + + /* Ensure that Frequency clock is in the range [3 * baudrate, 4096 * baudrate] */ + if ((lpuart_ker_ck_pres < (3U * huart->Init.BaudRate)) || + (lpuart_ker_ck_pres > (4096U * huart->Init.BaudRate))) + { + ret = HAL_ERROR; + } + else + { + /* Check computed UsartDiv value is in allocated range + (it is forbidden to write values lower than 0x300 in the LPUART_BRR register) */ + usartdiv = (uint32_t)(UART_DIV_LPUART(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= LPUART_BRR_MIN) && (usartdiv <= LPUART_BRR_MAX)) + { + huart->Instance->BRR = usartdiv; + } + else + { + ret = HAL_ERROR; + } + } /* if ( (lpuart_ker_ck_pres < (3 * huart->Init.BaudRate) ) || + (lpuart_ker_ck_pres > (4096 * huart->Init.BaudRate) )) */ + } /* if (pclk != 0) */ + } + /* Check UART Over Sampling to set Baud Rate Register */ + else if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + switch (clocksource) + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + break; + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + /* USARTDIV must be greater than or equal to 0d16 */ + if (pclk != 0U) + { + usartdiv = (uint32_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + { + brrtemp = (uint16_t)(usartdiv & 0xFFF0U); + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + huart->Instance->BRR = brrtemp; + } + else + { + ret = HAL_ERROR; + } + } + } + else + { + switch (clocksource) + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + break; + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + if (pclk != 0U) + { + /* USARTDIV must be greater than or equal to 0d16 */ + usartdiv = (uint32_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + { + huart->Instance->BRR = (uint16_t)usartdiv; + } + else + { + ret = HAL_ERROR; + } + } + } + + /* Initialize the number of data to process during RX/TX ISR execution */ + huart->NbTxDataToProcess = 1; + huart->NbRxDataToProcess = 1; + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + huart->TxISR = NULL; + + return ret; +} + +/** + * @brief Configure the UART peripheral advanced features. + * @param huart UART handle. + * @retval None + */ +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart) +{ + /* Check whether the set of advanced features to configure is properly set */ + assert_param(IS_UART_ADVFEATURE_INIT(huart->AdvancedInit.AdvFeatureInit)); + + /* if required, configure RX/TX pins swap */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT)) + { + assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap); + } + + /* if required, configure TX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_TXINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_TXINV(huart->AdvancedInit.TxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_TXINV, huart->AdvancedInit.TxPinLevelInvert); + } + + /* if required, configure RX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_RXINV(huart->AdvancedInit.RxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_RXINV, huart->AdvancedInit.RxPinLevelInvert); + } + + /* if required, configure data inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DATAINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_DATAINV(huart->AdvancedInit.DataInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_DATAINV, huart->AdvancedInit.DataInvert); + } + + /* if required, configure RX overrun detection disabling */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXOVERRUNDISABLE_INIT)) + { + assert_param(IS_UART_OVERRUN(huart->AdvancedInit.OverrunDisable)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_OVRDIS, huart->AdvancedInit.OverrunDisable); + } + + /* if required, configure DMA disabling on reception error */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DMADISABLEONERROR_INIT)) + { + assert_param(IS_UART_ADVFEATURE_DMAONRXERROR(huart->AdvancedInit.DMADisableonRxError)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_DDRE, huart->AdvancedInit.DMADisableonRxError); + } + + /* if required, configure auto Baud rate detection scheme */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_AUTOBAUDRATE_INIT)) + { + assert_param(IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(huart->Instance)); + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATE(huart->AdvancedInit.AutoBaudRateEnable)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABREN, huart->AdvancedInit.AutoBaudRateEnable); + /* set auto Baudrate detection parameters if detection is enabled */ + if (huart->AdvancedInit.AutoBaudRateEnable == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE) + { + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(huart->AdvancedInit.AutoBaudRateMode)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABRMODE, huart->AdvancedInit.AutoBaudRateMode); + } + } + + /* if required, configure MSB first on communication line */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_MSBFIRST_INIT)) + { + assert_param(IS_UART_ADVFEATURE_MSBFIRST(huart->AdvancedInit.MSBFirst)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_MSBFIRST, huart->AdvancedInit.MSBFirst); + } +} + +/** + * @brief Check the UART Idle State. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) +{ + uint32_t tickstart; + + /* Initialize the UART ErrorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((huart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_TEACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + /* Disable TXE interrupt for the interrupt process */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE)); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Check if the Receiver is enabled */ + if ((huart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + huart->RxState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief This function handles UART Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param huart UART handle. + * @param Flag Specifies the UART flag to check + * @param Status The actual Flag status (SET or RESET) + * @param Tickstart Tick start value + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + + return HAL_TIMEOUT; + } + + if ((READ_BIT(huart->Instance->CR1, USART_CR1_RE) != 0U) && (Flag != UART_FLAG_TXE) && (Flag != UART_FLAG_TC)) + { + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) == SET) + { + /* Clear Overrun Error flag*/ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts if ongoing */ + UART_EndRxTransfer(huart); + + huart->ErrorCode = HAL_UART_ERROR_ORE; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_ERROR; + } + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RTOF) == SET) + { + /* Clear Receiver Timeout flag*/ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts if ongoing */ + UART_EndRxTransfer(huart); + + huart->ErrorCode = HAL_UART_ERROR_RTO; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_TIMEOUT; + } + } + } + } + return HAL_OK; +} + +/** + * @brief Start Receive operation in interrupt mode. + * @note This function could be called by all HAL UART API providing reception in Interrupt mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + huart->RxXferCount = Size; + huart->RxISR = NULL; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Configure Rx interrupt processing */ + if ((huart->FifoMode == UART_FIFOMODE_ENABLE) && (Size >= huart->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT_FIFOEN; + } + else + { + huart->RxISR = UART_RxISR_8BIT_FIFOEN; + } + + /* Enable the UART Parity Error interrupt and RX FIFO Threshold interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + } + else + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT; + } + else + { + huart->RxISR = UART_RxISR_8BIT; + } + + /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + else + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + return HAL_OK; +} + +/** + * @brief Start Receive operation in DMA mode. + * @note This function could be called by all HAL UART API providing reception in DMA mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + if (huart->hdmarx != NULL) + { + /* Set the UART DMA transfer complete callback */ + huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmarx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->RDR, (uint32_t)huart->pRxBuffPtr, Size) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + /* Restore huart->RxState to ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + } + + /* Enable the UART Parity Error Interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the UART CR3 register */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; +} + + +/** + * @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndTxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable TXEIE, TCIE, TXFT interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_TXFTIE)); + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; +} + + +/** + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndRxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* In case of reception waiting for IDLE event, disable also the IDLE IE interrupt source */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Reset RxIsr function pointer */ + huart->RxISR = NULL; +} + + +/** + * @brief DMA UART transmit process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + huart->TxXferCount = 0U; + + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + /* DMA Circular mode */ + else + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART transmit process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx Half complete callback*/ + huart->TxHalfCpltCallback(huart); +#else + /*Call legacy weak Tx Half complete callback*/ + HAL_UART_TxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART receive process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + huart->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* If Reception till IDLE event has been selected, Disable IDLE Interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + } + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART receive process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Half Transfer */ + huart->RxEventType = HAL_UART_RXEVENT_HT; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize / 2U); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize / 2U); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Half Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Half complete callback*/ + huart->RxHalfCpltCallback(huart); +#else + /*Call legacy weak Rx Half complete callback*/ + HAL_UART_RxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART communication error callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + /* Stop UART DMA Tx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + huart->TxXferCount = 0U; + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + huart->RxXferCount = 0U; + UART_EndRxTransfer(huart); + } + + huart->ErrorCode |= HAL_UART_ERROR_DMA; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + huart->RxXferCount = 0U; + huart->TxXferCount = 0U; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmarx != NULL) + { + if (huart->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmatx != NULL) + { + if (huart->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortTransmit_IT API (Abort only Tx transfer) + * (This callback is executed at end of DMA Tx Abort procedure following user abort request, + * and leads to user Tx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->TxXferCount = 0U; + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortReceive_IT API (Abort only Rx transfer) + * (This callback is executed at end of DMA Rx Abort procedure following user abort request, + * and leads to user Rx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief TX interrupt handler for 7 or 8 bits data word length . + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_8BIT(UART_HandleTypeDef *huart) +{ + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + if (huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Data Register Empty Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + else + { + huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); + huart->pTxBuffPtr++; + huart->TxXferCount--; + } + } +} + +/** + * @brief TX interrupt handler for 9 bits data word length. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_16BIT(UART_HandleTypeDef *huart) +{ + const uint16_t *tmp; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + if (huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Data Register Empty Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + else + { + tmp = (const uint16_t *) huart->pTxBuffPtr; + huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); + huart->pTxBuffPtr += 2U; + huart->TxXferCount--; + } + } +} + +/** + * @brief TX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + for (nb_tx_data = huart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (huart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + break; /* force exit loop */ + } + else if (READ_BIT(huart->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); + huart->pTxBuffPtr++; + huart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief TX interrupt handler for 9 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + const uint16_t *tmp; + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + for (nb_tx_data = huart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (huart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + break; /* force exit loop */ + } + else if (READ_BIT(huart->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + tmp = (const uint16_t *) huart->pTxBuffPtr; + huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); + huart->pTxBuffPtr += 2U; + huart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief Wrap up transmission in non-blocking mode. + * @param huart pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +static void UART_EndTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable the UART Transmit Complete Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + /* Tx process is ended, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Cleat TxISR function pointer */ + huart->TxISR = NULL; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief RX interrupt handler for 7 or 8 bits data word length . + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_8BIT(UART_HandleTypeDef *huart) +{ + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + huart->pRxBuffPtr++; + huart->RxXferCount--; + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 9 bits data word length . + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_16BIT(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + tmp = (uint16_t *) huart->pRxBuffPtr ; + *tmp = (uint16_t)(uhdata & uhMask); + huart->pRxBuffPtr += 2U; + huart->RxXferCount--; + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + uint16_t nb_rx_data; + uint16_t rxdatacount; + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + nb_rx_data = huart->NbRxDataToProcess; + while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + huart->pRxBuffPtr++; + huart->RxXferCount--; + isrflags = READ_REG(huart->Instance->ISR); + + /* If some non blocking errors occurred */ + if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = huart->RxXferCount; + if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + huart->RxISR = UART_RxISR_8BIT; + + /* Enable the UART Data Register Not Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 9 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + uint16_t nb_rx_data; + uint16_t rxdatacount; + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + nb_rx_data = huart->NbRxDataToProcess; + while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + tmp = (uint16_t *) huart->pRxBuffPtr ; + *tmp = (uint16_t)(uhdata & uhMask); + huart->pRxBuffPtr += 2U; + huart->RxXferCount--; + isrflags = READ_REG(huart->Instance->ISR); + + /* If some non blocking errors occurred */ + if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = huart->RxXferCount; + if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + huart->RxISR = UART_RxISR_16BIT; + + /* Enable the UART Data Register Not Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart_ex.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart_ex.c new file mode 100644 index 0000000..29e6724 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart_ex.c @@ -0,0 +1,1090 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_uart_ex.c + * @author MCD Application Team + * @brief Extended UART HAL module driver. + * This file provides firmware functions to manage the following extended + * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### UART peripheral extended features ##### + ============================================================================== + + (#) Declare a UART_HandleTypeDef handle structure. + + (#) For the UART RS485 Driver Enable mode, initialize the UART registers + by calling the HAL_RS485Ex_Init() API. + + (#) FIFO mode enabling/disabling and RX/TX FIFO threshold programming. + + -@- When UART operates in FIFO mode, FIFO mode must be enabled prior + starting RX/TX transfers. Also RX/TX FIFO thresholds must be + configured prior starting RX/TX transfers. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_HAL_Driver + * @{ + */ + +/** @defgroup UARTEx UARTEx + * @brief UART Extended HAL module driver + * @{ + */ + +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup UARTEX_Private_Constants UARTEx Private Constants + * @{ + */ +/* UART RX FIFO depth */ +#define RX_FIFO_DEPTH 8U + +/* UART TX FIFO depth */ +#define TX_FIFO_DEPTH 8U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup UARTEx_Private_Functions UARTEx Private Functions + * @{ + */ +static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup UARTEx_Exported_Functions UARTEx Exported Functions + * @{ + */ + +/** @defgroup UARTEx_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Extended Initialization and Configuration Functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode the parameters below can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + (++) One-Bit Sampling Method + (+) For the asynchronous mode, the following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) auto Baud rate detection + [..] + The HAL_RS485Ex_Init() API follows the UART RS485 mode configuration + procedures (details for the procedures are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible UART formats are listed in the + following table. + + Table 1. UART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | UART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the RS485 Driver enable feature according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @param Polarity Select the driver enable polarity. + * This parameter can be one of the following values: + * @arg @ref UART_DE_POLARITY_HIGH DE signal is active high + * @arg @ref UART_DE_POLARITY_LOW DE signal is active low + * @param AssertionTime Driver Enable assertion time: + * 5-bit value defining the time between the activation of the DE (Driver Enable) + * signal and the beginning of the start bit. It is expressed in sample time + * units (1/8 or 1/16 bit time, depending on the oversampling rate) + * @param DeassertionTime Driver Enable deassertion time: + * 5-bit value defining the time between the end of the last stop bit, in a + * transmitted message, and the de-activation of the DE (Driver Enable) signal. + * It is expressed in sample time units (1/8 or 1/16 bit time, depending on the + * oversampling rate). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime) +{ + uint32_t temp; + + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + /* Check the Driver Enable UART instance */ + assert_param(IS_UART_DRIVER_ENABLE_INSTANCE(huart->Instance)); + + /* Check the Driver Enable polarity */ + assert_param(IS_UART_DE_POLARITY(Polarity)); + + /* Check the Driver Enable assertion time */ + assert_param(IS_UART_ASSERTIONTIME(AssertionTime)); + + /* Check the Driver Enable deassertion time */ + assert_param(IS_UART_DEASSERTIONTIME(DeassertionTime)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_DEM); + + /* Set the Driver Enable polarity */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_DEP, Polarity); + + /* Set the Driver Enable assertion and deassertion times */ + temp = (AssertionTime << UART_CR1_DEAT_ADDRESS_LSB_POS); + temp |= (DeassertionTime << UART_CR1_DEDT_ADDRESS_LSB_POS); + MODIFY_REG(huart->Instance->CR1, (USART_CR1_DEDT | USART_CR1_DEAT), temp); + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @} + */ + +/** @defgroup UARTEx_Exported_Functions_Group2 IO operation functions + * @brief Extended functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of Wakeup and FIFO mode related callback functions. + + (#) Wakeup from Stop mode Callback: + (+) HAL_UARTEx_WakeupCallback() + + (#) TX/RX Fifos Callbacks: + (+) HAL_UARTEx_RxFifoFullCallback() + (+) HAL_UARTEx_TxFifoEmptyCallback() + +@endverbatim + * @{ + */ + +/** + * @brief UART wakeup from Stop mode callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_WakeupCallback can be implemented in the user file. + */ +} + +/** + * @brief UART RX Fifo full callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_RxFifoFullCallback can be implemented in the user file. + */ +} + +/** + * @brief UART TX Fifo empty callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_TxFifoEmptyCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup UARTEx_Exported_Functions_Group3 Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides the following functions: + (+) HAL_MultiProcessorEx_AddressLength_Set() API optionally sets the UART node address + detection length to more than 4 bits for multiprocessor address mark wake up. + (+) HAL_UARTEx_StopModeWakeUpSourceConfig() API defines the wake-up from stop mode + trigger: address match, Start Bit detection or RXNE bit status. + (+) HAL_UARTEx_EnableStopMode() API enables the UART to wake up the MCU from stop mode + (+) HAL_UARTEx_DisableStopMode() API disables the above functionality + (+) HAL_UARTEx_EnableFifoMode() API enables the FIFO mode + (+) HAL_UARTEx_DisableFifoMode() API disables the FIFO mode + (+) HAL_UARTEx_SetTxFifoThreshold() API sets the TX FIFO threshold + (+) HAL_UARTEx_SetRxFifoThreshold() API sets the RX FIFO threshold + + [..] This subsection also provides a set of additional functions providing enhanced reception + services to user. (For example, these functions allow application to handle use cases + where number of data to be received is unknown). + + (#) Compared to standard reception services which only consider number of received + data elements as reception completion criteria, these functions also consider additional events + as triggers for updating reception status to caller : + (+) Detection of inactivity period (RX line has not been active for a given period). + (++) RX inactivity detected by IDLE event, i.e. RX line has been in idle state (normally high state) + for 1 frame time, after last received byte. + (++) RX inactivity detected by RTO, i.e. line has been in idle state + for a programmable time, after last received byte. + (+) Detection that a specific character has been received. + + (#) There are two mode of transfer: + (+) Blocking mode: The reception is performed in polling mode, until either expected number of data is received, + or till IDLE event occurs. Reception is handled only during function execution. + When function exits, no data reception could occur. HAL status and number of actually received data elements, + are returned by function after finishing transfer. + (+) Non-Blocking mode: The reception is performed using Interrupts or DMA. + These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when using DMA mode. + The HAL_UARTEx_RxEventCallback() user callback will be executed during Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a reception error is detected. + + (#) Blocking mode API: + (+) HAL_UARTEx_ReceiveToIdle() + + (#) Non-Blocking mode API with Interrupt: + (+) HAL_UARTEx_ReceiveToIdle_IT() + + (#) Non-Blocking mode API with DMA: + (+) HAL_UARTEx_ReceiveToIdle_DMA() + +@endverbatim + * @{ + */ + +/** + * @brief By default in multiprocessor mode, when the wake up method is set + * to address mark, the UART handles only 4-bit long addresses detection; + * this API allows to enable longer addresses detection (6-, 7- or 8-bit + * long). + * @note Addresses detection lengths are: 6-bit address detection in 7-bit data mode, + * 7-bit address detection in 8-bit data mode, 8-bit address detection in 9-bit data mode. + * @param huart UART handle. + * @param AddressLength This parameter can be one of the following values: + * @arg @ref UART_ADDRESS_DETECT_4B 4-bit long address + * @arg @ref UART_ADDRESS_DETECT_7B 6-, 7- or 8-bit long address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the address length parameter */ + assert_param(IS_UART_ADDRESSLENGTH_DETECT(AddressLength)); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the address length */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, AddressLength); + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Set Wakeup from Stop mode interrupt flag selection. + * @note It is the application responsibility to enable the interrupt used as + * usart_wkup interrupt source before entering low-power mode. + * @param huart UART handle. + * @param WakeUpSelection Address match, Start Bit detection or RXNE/RXFNE bit status. + * This parameter can be one of the following values: + * @arg @ref UART_WAKEUP_ON_ADDRESS + * @arg @ref UART_WAKEUP_ON_STARTBIT + * @arg @ref UART_WAKEUP_ON_READDATA_NONEMPTY + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart; + + /* check the wake-up from stop mode UART instance */ + assert_param(IS_UART_WAKEUP_FROMSTOP_INSTANCE(huart->Instance)); + /* check the wake-up selection parameter */ + assert_param(IS_UART_WAKEUP_SELECTION(WakeUpSelection.WakeUpEvent)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the wake-up selection scheme */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_WUS, WakeUpSelection.WakeUpEvent); + + if (WakeUpSelection.WakeUpEvent == UART_WAKEUP_ON_ADDRESS) + { + UARTEx_Wakeup_AddressConfig(huart, WakeUpSelection); + } + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + status = HAL_TIMEOUT; + } + else + { + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief Enable UART Stop Mode. + * @note The UART is able to wake up the MCU from Stop 1 mode as long as UART clock is HSI or LSE. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Set UESM bit */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_UESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Disable UART Stop Mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Clear UESM bit */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_UESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enable the FIFO mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Enable FIFO mode */ + SET_BIT(tmpcr1, USART_CR1_FIFOEN); + huart->FifoMode = UART_FIFOMODE_ENABLE; + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Disable the FIFO mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Enable FIFO mode */ + CLEAR_BIT(tmpcr1, USART_CR1_FIFOEN); + huart->FifoMode = UART_FIFOMODE_DISABLE; + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Set the TXFIFO threshold. + * @param huart UART handle. + * @param Threshold TX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref UART_TXFIFO_THRESHOLD_1_8 + * @arg @ref UART_TXFIFO_THRESHOLD_1_4 + * @arg @ref UART_TXFIFO_THRESHOLD_1_2 + * @arg @ref UART_TXFIFO_THRESHOLD_3_4 + * @arg @ref UART_TXFIFO_THRESHOLD_7_8 + * @arg @ref UART_TXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + assert_param(IS_UART_TXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Update TX threshold configuration */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_TXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Set the RXFIFO threshold. + * @param huart UART handle. + * @param Threshold RX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref UART_RXFIFO_THRESHOLD_1_8 + * @arg @ref UART_RXFIFO_THRESHOLD_1_4 + * @arg @ref UART_RXFIFO_THRESHOLD_1_2 + * @arg @ref UART_RXFIFO_THRESHOLD_3_4 + * @arg @ref UART_RXFIFO_THRESHOLD_7_8 + * @arg @ref UART_RXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check the parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + assert_param(IS_UART_RXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Update RX threshold configuration */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_RXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Receive an amount of data in blocking mode till either the expected number of data + * is received or an IDLE event occurs. + * @note HAL_OK is returned if reception is completed (expected number of data has been received) + * or if reception is stopped after IDLE event (less than the expected number of data has been received) + * In this case, RxLen output parameter indicates number of data available in reception buffer. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled using uint16_t pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper + * alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @param RxLen Number of data elements finally received + * (could be lower than Size, in case reception ends on IDLE event) + * @param Timeout Timeout duration expressed in ms (covers the whole reception sequence). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, + uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a uint16_t frontier, as data to be received from RDR will be + handled through a uint16_t cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + uhMask = huart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + /* Initialize output number of received elements */ + *RxLen = 0U; + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + /* Check if IDLE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE)) + { + /* Clear IDLE flag in ISR */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + + /* If Set, but no data ever received, clear flag without exiting loop */ + /* If Set, and data has already been received, this means Idle Event is valid : End reception */ + if (*RxLen > 0U) + { + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + } + + /* Check if RXNE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE)) + { + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + /* Increment number of received elements */ + *RxLen += 1U; + huart->RxXferCount--; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + } + } + + /* Set number of received elements in output parameter : RxLen */ + *RxLen = huart->RxXferSize - huart->RxXferCount; + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode till either the expected number of data + * is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to UART interrupts raised by RXNE and IDLE events. Callback is called at end of reception indicating + * number of received data elements. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled using uint16_t pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a uint16_t frontier, as data to be received from RDR will be + handled through a uint16_t cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + (void)UART_Start_Receive_IT(huart, pData, Size); + + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode till either the expected number + * of data is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to DMA services, transferring automatically received data elements in user reception buffer and + * calling registered callbacks at half/end of reception. UART IDLE events are also used to consider + * reception phase as ended. In all cases, callback execution will indicate number of received data elements. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a uint16_t frontier, as data copy from RDR will be + handled by DMA from a uint16_t frontier. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + status = UART_Start_Receive_DMA(huart, pData, Size); + + /* Check Rx process has been successfully started */ + if (status == HAL_OK) + { + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Provide Rx Event type that has lead to RxEvent callback execution. + * @note When HAL_UARTEx_ReceiveToIdle_IT() or HAL_UARTEx_ReceiveToIdle_DMA() API are called, progress + * of reception process is provided to application through calls of Rx Event callback (either default one + * HAL_UARTEx_RxEventCallback() or user registered one). As several types of events could occur (IDLE event, + * Half Transfer, or Transfer Complete), this function allows to retrieve the Rx Event type that has lead + * to Rx Event callback execution. + * @note This function is expected to be called within the user implementation of Rx Event Callback, + * in order to provide the accurate value : + * In Interrupt Mode : + * - HAL_UART_RXEVENT_TC : when Reception has been completed (expected nb of data has been received) + * - HAL_UART_RXEVENT_IDLE : when Idle event occurred prior reception has been completed (nb of + * received data is lower than expected one) + * In DMA Mode : + * - HAL_UART_RXEVENT_TC : when Reception has been completed (expected nb of data has been received) + * - HAL_UART_RXEVENT_HT : when half of expected nb of data has been received + * - HAL_UART_RXEVENT_IDLE : when Idle event occurred prior reception has been completed (nb of + * received data is lower than expected one). + * In DMA mode, RxEvent callback could be called several times; + * When DMA is configured in Normal Mode, HT event does not stop Reception process; + * When DMA is configured in Circular Mode, HT, TC or IDLE events don't stop Reception process; + * @param huart UART handle. + * @retval Rx Event Type (return vale will be a value of @ref UART_RxEvent_Type_Values) + */ +HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(const UART_HandleTypeDef *huart) +{ + /* Return Rx Event type value, as stored in UART handle */ + return (huart->RxEventType); +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup UARTEx_Private_Functions + * @{ + */ + +/** + * @brief Initialize the UART wake-up from stop mode parameters when triggered by address detection. + * @param huart UART handle. + * @param WakeUpSelection UART wake up from stop mode parameters. + * @retval None + */ +static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) +{ + assert_param(IS_UART_ADDRESSLENGTH_DETECT(WakeUpSelection.AddressLength)); + + /* Set the USART address length */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, WakeUpSelection.AddressLength); + + /* Set the USART address node */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)WakeUpSelection.Address << UART_CR2_ADDRESS_LSB_POS)); +} + +/** + * @brief Calculate the number of data to process in RX/TX ISR. + * @note The RX FIFO depth and the TX FIFO depth is extracted from + * the UART configuration registers. + * @param huart UART handle. + * @retval None + */ +static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart) +{ + uint8_t rx_fifo_depth; + uint8_t tx_fifo_depth; + uint8_t rx_fifo_threshold; + uint8_t tx_fifo_threshold; + static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; + static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; + + if (huart->FifoMode == UART_FIFOMODE_DISABLE) + { + huart->NbTxDataToProcess = 1U; + huart->NbRxDataToProcess = 1U; + } + else + { + rx_fifo_depth = RX_FIFO_DEPTH; + tx_fifo_depth = TX_FIFO_DEPTH; + rx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); + tx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); + huart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / + (uint16_t)denominator[tx_fifo_threshold]; + huart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / + (uint16_t)denominator[rx_fifo_threshold]; + } +} +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_adc.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_adc.c new file mode 100644 index 0000000..24aa073 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_adc.c @@ -0,0 +1,778 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_adc.c + * @author MCD Application Team + * @brief ADC LL module driver + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_adc.h" +#include "stm32g0xx_ll_bus.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (ADC1) + +/** @addtogroup ADC_LL ADC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup ADC_LL_Private_Constants + * @{ + */ + +/* Definitions of ADC hardware constraints delays */ +/* Note: Only ADC peripheral HW delays are defined in ADC LL driver driver, */ +/* not timeout values: */ +/* Timeout values for ADC operations are dependent to device clock */ +/* configuration (system clock versus ADC clock), */ +/* and therefore must be defined in user application. */ +/* Refer to @ref ADC_LL_EC_HW_DELAYS for description of ADC timeout */ +/* values definition. */ +/* Note: ADC timeout values are defined here in CPU cycles to be independent */ +/* of device clock setting. */ +/* In user application, ADC timeout values should be defined with */ +/* temporal values, in function of device clock settings. */ +/* Highest ratio CPU clock frequency vs ADC clock frequency: */ +/* - ADC clock from synchronous clock with AHB prescaler 512, */ +/* APB prescaler 16, ADC prescaler 4. */ +/* - ADC clock from asynchronous clock (HSI) with prescaler 1, */ +/* with highest ratio CPU clock frequency vs HSI clock frequency: */ +/* CPU clock frequency max 56MHz, HSI frequency 16MHz: ratio 4. */ +/* Unit: CPU cycles. */ +#define ADC_CLOCK_RATIO_VS_CPU_HIGHEST (512UL * 16UL * 4UL) +#define ADC_TIMEOUT_DISABLE_CPU_CYCLES (ADC_CLOCK_RATIO_VS_CPU_HIGHEST * 1UL) +#define ADC_TIMEOUT_STOP_CONVERSION_CPU_CYCLES (ADC_CLOCK_RATIO_VS_CPU_HIGHEST * 1UL) +/* Note: CCRDY handshake requires 1APB + 2 ADC + 3 APB cycles */ +/* after the channel configuration has been changed. */ +/* Driver timeout is approximated to 6 CPU cycles. */ +#define ADC_TIMEOUT_CCRDY_CPU_CYCLES (ADC_CLOCK_RATIO_VS_CPU_HIGHEST * 6UL) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/** @addtogroup ADC_LL_Private_Macros + * @{ + */ + +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* common to several ADC instances. */ +#define IS_LL_ADC_COMMON_CLOCK(__CLOCK__) \ + (((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV1) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV2) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV4) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV6) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV8) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV10) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV12) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV16) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV32) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV64) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV128) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV256) \ + ) + +#define IS_LL_ADC_CLOCK_FREQ_MODE(__CLOCK_FREQ_MODE__) \ + (((__CLOCK_FREQ_MODE__) == LL_ADC_CLOCK_FREQ_MODE_HIGH) \ + || ((__CLOCK_FREQ_MODE__) == LL_ADC_CLOCK_FREQ_MODE_LOW) \ + ) + +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* ADC instance. */ +#define IS_LL_ADC_CLOCK(__CLOCK__) \ + (((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV4) \ + || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV2) \ + || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV1) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC) \ + ) + +#define IS_LL_ADC_RESOLUTION(__RESOLUTION__) \ + (((__RESOLUTION__) == LL_ADC_RESOLUTION_12B) \ + || ((__RESOLUTION__) == LL_ADC_RESOLUTION_10B) \ + || ((__RESOLUTION__) == LL_ADC_RESOLUTION_8B) \ + || ((__RESOLUTION__) == LL_ADC_RESOLUTION_6B) \ + ) + +#define IS_LL_ADC_DATA_ALIGN(__DATA_ALIGN__) \ + (((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_RIGHT) \ + || ((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_LEFT) \ + ) + +#define IS_LL_ADC_LOW_POWER(__LOW_POWER__) \ + (((__LOW_POWER__) == LL_ADC_LP_MODE_NONE) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOWAIT) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOPOWEROFF) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF) \ + ) + +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* ADC group regular */ +#if defined(TIM15) && defined(TIM6) && defined(TIM2) +#define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__) \ + (((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH4 ) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM6_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM15_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ + ) +#elif defined(TIM15) && defined(TIM6) +#define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__) \ + (((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH4 ) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM6_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM15_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ + ) +#elif defined(TIM2) +#define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__) \ + (((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH4 ) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ + ) +#else +#define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__) \ + (((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH4 ) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ + ) +#endif /* TIM15 && TIM6 && TIM2 */ + +#define IS_LL_ADC_REG_CONTINUOUS_MODE(__REG_CONTINUOUS_MODE__) \ + (((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_SINGLE) \ + || ((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_CONTINUOUS) \ + ) + +#define IS_LL_ADC_REG_DMA_TRANSFER(__REG_DMA_TRANSFER__) \ + (((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_NONE) \ + || ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_LIMITED) \ + || ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_UNLIMITED) \ + ) + +#define IS_LL_ADC_REG_OVR_DATA_BEHAVIOR(__REG_OVR_DATA_BEHAVIOR__) \ + (((__REG_OVR_DATA_BEHAVIOR__) == LL_ADC_REG_OVR_DATA_PRESERVED) \ + || ((__REG_OVR_DATA_BEHAVIOR__) == LL_ADC_REG_OVR_DATA_OVERWRITTEN) \ + ) + +#define IS_LL_ADC_REG_SEQ_MODE(__REG_SEQ_MODE__) \ + (((__REG_SEQ_MODE__) == LL_ADC_REG_SEQ_FIXED) \ + || ((__REG_SEQ_MODE__) == LL_ADC_REG_SEQ_CONFIGURABLE) \ + ) + +#define IS_LL_ADC_REG_SEQ_SCAN_LENGTH(__REG_SEQ_SCAN_LENGTH__) \ + (((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_DISABLE) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS) \ + ) + +#define IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(__REG_SEQ_DISCONT_MODE__) \ + (((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_DISABLE) \ + || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_1RANK) \ + ) + +/** + * @} + */ + + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup ADC_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize registers of all ADC instances belonging to + * the same ADC common instance to their default reset values. + * @note This function is performing a hard reset, using high level + * clock source RCC ADC reset. + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC common registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_ADC_CommonDeInit(ADC_Common_TypeDef *ADCxy_COMMON) +{ + /* Check the parameters */ + assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON)); + + /* Prevent unused argument(s) compilation warning if no assert_param check */ + (void)(ADCxy_COMMON); + + /* Force reset of ADC clock (core clock) */ + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_ADC); + + /* Release reset of ADC clock (core clock) */ + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_ADC); + + return SUCCESS; +} + +/** + * @brief Initialize some features of ADC common parameters + * (all ADC instances belonging to the same ADC common instance) + * and multimode (for devices with several ADC instances available). + * @note The setting of ADC common parameters is conditioned to + * ADC instances state: + * All ADC instances belonging to the same ADC common instance + * must be disabled. + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param pADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC common registers are initialized + * - ERROR: ADC common registers are not initialized + */ +ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, const LL_ADC_CommonInitTypeDef *pADC_CommonInitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON)); + assert_param(IS_LL_ADC_COMMON_CLOCK(pADC_CommonInitStruct->CommonClock)); + + /* Note: Hardware constraint (refer to description of functions */ + /* "LL_ADC_SetCommonXXX()": */ + /* On this STM32 series, setting of these features is conditioned to */ + /* ADC state: */ + /* All ADC instances of the ADC common group must be disabled. */ + if (__LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(ADCxy_COMMON) == 0UL) + { + /* Configuration of ADC hierarchical scope: */ + /* - common to several ADC */ + /* (all ADC instances belonging to the same ADC common instance) */ + /* - Set ADC clock (conversion clock) */ + LL_ADC_SetCommonClock(ADCxy_COMMON, pADC_CommonInitStruct->CommonClock); + } + else + { + /* Initialization error: One or several ADC instances belonging to */ + /* the same ADC common instance are not disabled. */ + status = ERROR; + } + + return status; +} + +/** + * @brief Set each @ref LL_ADC_CommonInitTypeDef field to default value. + * @param pADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *pADC_CommonInitStruct) +{ + /* Set pADC_CommonInitStruct fields to default values */ + /* Set fields of ADC common */ + /* (all ADC instances belonging to the same ADC common instance) */ + pADC_CommonInitStruct->CommonClock = LL_ADC_CLOCK_ASYNC_DIV2; + +} + +/** + * @brief De-initialize registers of the selected ADC instance + * to their default reset values. + * @note To reset all ADC instances quickly (perform a hard reset), + * use function @ref LL_ADC_CommonDeInit(). + * @note If this functions returns error status, it means that ADC instance + * is in an unknown state. + * In this case, perform a hard reset using high level + * clock source RCC ADC reset. + * Refer to function @ref LL_ADC_CommonDeInit(). + * @param ADCx ADC instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are de-initialized + * - ERROR: ADC registers are not de-initialized + */ +ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) +{ + ErrorStatus status = SUCCESS; + + __IO uint32_t timeout_cpu_cycles = 0UL; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + + /* Disable ADC instance if not already disabled. */ + if (LL_ADC_IsEnabled(ADCx) == 1UL) + { + /* Stop potential ADC conversion on going on ADC group regular. */ + LL_ADC_REG_StopConversion(ADCx); + + /* Wait for ADC conversions are effectively stopped */ + timeout_cpu_cycles = ADC_TIMEOUT_STOP_CONVERSION_CPU_CYCLES; + while (LL_ADC_REG_IsStopConversionOngoing(ADCx) == 1UL) + { + timeout_cpu_cycles--; + if (timeout_cpu_cycles == 0UL) + { + /* Time-out error */ + status = ERROR; + break; + } + } + + /* Disable the ADC instance */ + LL_ADC_Disable(ADCx); + + /* Wait for ADC instance is effectively disabled */ + timeout_cpu_cycles = ADC_TIMEOUT_DISABLE_CPU_CYCLES; + while (LL_ADC_IsDisableOngoing(ADCx) == 1UL) + { + timeout_cpu_cycles--; + if (timeout_cpu_cycles == 0UL) + { + /* Time-out error */ + status = ERROR; + break; + } + } + } + + /* Check whether ADC state is compliant with expected state */ + if (READ_BIT(ADCx->CR, + (ADC_CR_ADSTP | ADC_CR_ADSTART + | ADC_CR_ADDIS | ADC_CR_ADEN) + ) + == 0UL) + { + /* ========== Reset ADC registers ========== */ + /* Reset register IER */ + CLEAR_BIT(ADCx->IER, + (LL_ADC_IT_ADRDY + | LL_ADC_IT_EOC + | LL_ADC_IT_EOS + | LL_ADC_IT_OVR + | LL_ADC_IT_EOSMP + | LL_ADC_IT_AWD1 + | LL_ADC_IT_AWD2 + | LL_ADC_IT_AWD3 + | LL_ADC_IT_EOCAL + | LL_ADC_IT_CCRDY + ) + ); + + /* Reset register ISR */ + SET_BIT(ADCx->ISR, + (LL_ADC_FLAG_ADRDY + | LL_ADC_FLAG_EOC + | LL_ADC_FLAG_EOS + | LL_ADC_FLAG_OVR + | LL_ADC_FLAG_EOSMP + | LL_ADC_FLAG_AWD1 + | LL_ADC_FLAG_AWD2 + | LL_ADC_FLAG_AWD3 + | LL_ADC_FLAG_EOCAL + | LL_ADC_FLAG_CCRDY + ) + ); + + /* Reset register CR */ + /* Bits ADC_CR_ADCAL, ADC_CR_ADSTP, ADC_CR_ADSTART are in access mode */ + /* "read-set": no direct reset applicable. */ + CLEAR_BIT(ADCx->CR, ADC_CR_ADVREGEN); + + /* Reset register CFGR1 */ + CLEAR_BIT(ADCx->CFGR1, + (ADC_CFGR1_AWD1CH | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL | ADC_CFGR1_DISCEN + | ADC_CFGR1_CHSELRMOD | ADC_CFGR1_AUTOFF | ADC_CFGR1_WAIT | ADC_CFGR1_CONT | ADC_CFGR1_OVRMOD + | ADC_CFGR1_EXTEN | ADC_CFGR1_EXTSEL | ADC_CFGR1_ALIGN | ADC_CFGR1_RES + | ADC_CFGR1_SCANDIR | ADC_CFGR1_DMACFG | ADC_CFGR1_DMAEN) + ); + + /* Reset register SMPR */ + CLEAR_BIT(ADCx->SMPR, ADC_SMPR_SMP1 | ADC_SMPR_SMP2 | ADC_SMPR_SMPSEL); + + /* Reset register CHSELR */ + CLEAR_BIT(ADCx->CHSELR, + (ADC_CHSELR_CHSEL18 | ADC_CHSELR_CHSEL17 | ADC_CHSELR_CHSEL16 + | ADC_CHSELR_CHSEL15 | ADC_CHSELR_CHSEL14 | ADC_CHSELR_CHSEL13 | ADC_CHSELR_CHSEL12 + | ADC_CHSELR_CHSEL11 | ADC_CHSELR_CHSEL10 | ADC_CHSELR_CHSEL9 | ADC_CHSELR_CHSEL8 + | ADC_CHSELR_CHSEL7 | ADC_CHSELR_CHSEL6 | ADC_CHSELR_CHSEL5 | ADC_CHSELR_CHSEL4 + | ADC_CHSELR_CHSEL3 | ADC_CHSELR_CHSEL2 | ADC_CHSELR_CHSEL1 | ADC_CHSELR_CHSEL0) + ); + + /* Reset register AWD1TR */ + MODIFY_REG(ADCx->AWD1TR, ADC_AWD1TR_HT1 | ADC_AWD1TR_LT1, ADC_AWD1TR_HT1); + + /* Reset register AWD2TR */ + MODIFY_REG(ADCx->AWD2TR, ADC_AWD2TR_HT2 | ADC_AWD2TR_LT2, ADC_AWD2TR_HT2); + + /* Reset register AWD3TR */ + MODIFY_REG(ADCx->AWD3TR, ADC_AWD3TR_HT3 | ADC_AWD3TR_LT3, ADC_AWD3TR_HT3); + + /* Wait for ADC channel configuration ready */ + timeout_cpu_cycles = ADC_TIMEOUT_CCRDY_CPU_CYCLES; + while (LL_ADC_IsActiveFlag_CCRDY(ADCx) == 0UL) + { + timeout_cpu_cycles--; + if (timeout_cpu_cycles == 0UL) + { + /* Time-out error */ + status = ERROR; + break; + } + } + + /* Clear flag ADC channel configuration ready */ + LL_ADC_ClearFlag_CCRDY(ADCx); + + /* Reset register DR */ + /* bits in access mode read only, no direct reset applicable */ + + /* Reset register CALFACT */ + CLEAR_BIT(ADCx->CALFACT, ADC_CALFACT_CALFACT); + + /* Reset register CFGR2 */ + /* Note: CFGR2 reset done at the end of de-initialization due to */ + /* clock source reset */ + /* Note: Update of ADC clock mode is conditioned to ADC state disabled: */ + /* already done above. */ + CLEAR_BIT(ADCx->CFGR2, + (ADC_CFGR2_CKMODE + | ADC_CFGR2_TOVS | ADC_CFGR2_OVSS | ADC_CFGR2_OVSR + | ADC_CFGR2_OVSE) + ); + + } + else + { + /* ADC instance is in an unknown state */ + /* Need to performing a hard reset of ADC instance, using high level */ + /* clock source RCC ADC reset. */ + /* Caution: On this STM32 series, if several ADC instances are available */ + /* on the selected device, RCC ADC reset will reset */ + /* all ADC instances belonging to the common ADC instance. */ + status = ERROR; + } + + return status; +} + +/** + * @brief Initialize some features of ADC instance. + * @note These parameters have an impact on ADC scope: ADC instance. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Instance . + * @note The setting of these parameters by function @ref LL_ADC_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 series. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + * @note After using this function, some other features must be configured + * using LL unitary functions. + * The minimum configuration remaining to be done is: + * - Set ADC group regular sequencer: + * Depending on the sequencer mode (refer to + * function @ref LL_ADC_REG_SetSequencerConfigurable() ): + * - map channel on the selected sequencer rank. + * Refer to function @ref LL_ADC_REG_SetSequencerRanks(); + * - map channel on rank corresponding to channel number. + * Refer to function @ref LL_ADC_REG_SetSequencerChannels(); + * - Set ADC channel sampling time + * Refer to function LL_ADC_SetSamplingTimeCommonChannels(); + * Refer to function LL_ADC_SetChannelSamplingTime(); + * @param ADCx ADC instance + * @param pADC_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are initialized + * - ERROR: ADC registers are not initialized + */ +ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, const LL_ADC_InitTypeDef *pADC_InitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + + assert_param(IS_LL_ADC_CLOCK(pADC_InitStruct->Clock)); + assert_param(IS_LL_ADC_RESOLUTION(pADC_InitStruct->Resolution)); + assert_param(IS_LL_ADC_DATA_ALIGN(pADC_InitStruct->DataAlignment)); + assert_param(IS_LL_ADC_LOW_POWER(pADC_InitStruct->LowPowerMode)); + + /* Note: Hardware constraint (refer to description of this function): */ + /* ADC instance must be disabled. */ + if (LL_ADC_IsEnabled(ADCx) == 0UL) + { + /* Configuration of ADC hierarchical scope: */ + /* - ADC instance */ + /* - Set ADC data resolution */ + /* - Set ADC conversion data alignment */ + /* - Set ADC low power mode */ + MODIFY_REG(ADCx->CFGR1, + ADC_CFGR1_RES + | ADC_CFGR1_ALIGN + | ADC_CFGR1_WAIT + | ADC_CFGR1_AUTOFF + , + pADC_InitStruct->Resolution + | pADC_InitStruct->DataAlignment + | pADC_InitStruct->LowPowerMode + ); + + MODIFY_REG(ADCx->CFGR2, + ADC_CFGR2_CKMODE + , + pADC_InitStruct->Clock + ); + } + else + { + /* Initialization error: ADC instance is not disabled. */ + status = ERROR; + } + + return status; +} + +/** + * @brief Set each @ref LL_ADC_InitTypeDef field to default value. + * @param pADC_InitStruct Pointer to a @ref LL_ADC_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_ADC_StructInit(LL_ADC_InitTypeDef *pADC_InitStruct) +{ + /* Set pADC_InitStruct fields to default values */ + /* Set fields of ADC instance */ + pADC_InitStruct->Clock = LL_ADC_CLOCK_SYNC_PCLK_DIV2; + pADC_InitStruct->Resolution = LL_ADC_RESOLUTION_12B; + pADC_InitStruct->DataAlignment = LL_ADC_DATA_ALIGN_RIGHT; + pADC_InitStruct->LowPowerMode = LL_ADC_LP_MODE_NONE; + +} + +/** + * @brief Initialize some features of ADC group regular. + * @note These parameters have an impact on ADC scope: ADC group regular. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Group_Regular + * (functions with prefix "REG"). + * @note The setting of these parameters by function @ref LL_ADC_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 series. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + * @note Before using this function, ADC group regular sequencer + * must be configured: refer to function + * @ref LL_ADC_REG_SetSequencerConfigurable(). + * @note After using this function, other features must be configured + * using LL unitary functions. + * The minimum configuration remaining to be done is: + * - Set ADC group regular sequencer: + * Depending on the sequencer mode (refer to + * function @ref LL_ADC_REG_SetSequencerConfigurable() ): + * - map channel on the selected sequencer rank. + * Refer to function @ref LL_ADC_REG_SetSequencerRanks(); + * - map channel on rank corresponding to channel number. + * Refer to function @ref LL_ADC_REG_SetSequencerChannels(); + * - Set ADC channel sampling time + * Refer to function LL_ADC_SetSamplingTimeCommonChannels(); + * Refer to function LL_ADC_SetChannelSamplingTime(); + * @param ADCx ADC instance + * @param pADC_RegInitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are initialized + * - ERROR: ADC registers are not initialized + */ +ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, const LL_ADC_REG_InitTypeDef *pADC_RegInitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + assert_param(IS_LL_ADC_REG_TRIG_SOURCE(pADC_RegInitStruct->TriggerSource)); + assert_param(IS_LL_ADC_REG_CONTINUOUS_MODE(pADC_RegInitStruct->ContinuousMode)); + assert_param(IS_LL_ADC_REG_DMA_TRANSFER(pADC_RegInitStruct->DMATransfer)); + assert_param(IS_LL_ADC_REG_OVR_DATA_BEHAVIOR(pADC_RegInitStruct->Overrun)); + + if (LL_ADC_REG_GetSequencerConfigurable(ADCx) != LL_ADC_REG_SEQ_FIXED) + { + assert_param(IS_LL_ADC_REG_SEQ_SCAN_LENGTH(pADC_RegInitStruct->SequencerLength)); + } + + if ((LL_ADC_REG_GetSequencerConfigurable(ADCx) == LL_ADC_REG_SEQ_FIXED) + || (pADC_RegInitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) + ) + { + assert_param(IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(pADC_RegInitStruct->SequencerDiscont)); + + /* ADC group regular continuous mode and discontinuous mode */ + /* can not be enabled simultenaeously */ + assert_param((pADC_RegInitStruct->ContinuousMode == LL_ADC_REG_CONV_SINGLE) + || (pADC_RegInitStruct->SequencerDiscont == LL_ADC_REG_SEQ_DISCONT_DISABLE)); + } + + /* Note: Hardware constraint (refer to description of this function): */ + /* ADC instance must be disabled. */ + if (LL_ADC_IsEnabled(ADCx) == 0UL) + { + /* Configuration of ADC hierarchical scope: */ + /* - ADC group regular */ + /* - Set ADC group regular trigger source */ + /* - Set ADC group regular sequencer length */ + /* - Set ADC group regular sequencer discontinuous mode */ + /* - Set ADC group regular continuous mode */ + /* - Set ADC group regular conversion data transfer: no transfer or */ + /* transfer by DMA, and DMA requests mode */ + /* - Set ADC group regular overrun behavior */ + /* Note: On this STM32 series, ADC trigger edge is set to value 0x0 by */ + /* setting of trigger source to SW start. */ + if ((LL_ADC_REG_GetSequencerConfigurable(ADCx) == LL_ADC_REG_SEQ_FIXED) + || (pADC_RegInitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) + ) + { + /* Case of sequencer mode fixed + or sequencer length >= 2 ranks with sequencer mode fully configurable: + discontinuous mode configured */ + MODIFY_REG(ADCx->CFGR1, + ADC_CFGR1_EXTSEL + | ADC_CFGR1_EXTEN + | ADC_CFGR1_DISCEN + | ADC_CFGR1_CONT + | ADC_CFGR1_DMAEN + | ADC_CFGR1_DMACFG + | ADC_CFGR1_OVRMOD + , + pADC_RegInitStruct->TriggerSource + | pADC_RegInitStruct->SequencerDiscont + | pADC_RegInitStruct->ContinuousMode + | pADC_RegInitStruct->DMATransfer + | pADC_RegInitStruct->Overrun + ); + } + else + { + /* Case of sequencer mode fully configurable + and sequencer length 1 rank (sequencer disabled): + discontinuous mode discarded (fixed to disable) */ + MODIFY_REG(ADCx->CFGR1, + ADC_CFGR1_EXTSEL + | ADC_CFGR1_EXTEN + | ADC_CFGR1_DISCEN + | ADC_CFGR1_CONT + | ADC_CFGR1_DMAEN + | ADC_CFGR1_DMACFG + | ADC_CFGR1_OVRMOD + , + pADC_RegInitStruct->TriggerSource + | LL_ADC_REG_SEQ_DISCONT_DISABLE + | pADC_RegInitStruct->ContinuousMode + | pADC_RegInitStruct->DMATransfer + | pADC_RegInitStruct->Overrun + ); + } + + /* Set ADC group regular sequencer length */ + if (LL_ADC_REG_GetSequencerConfigurable(ADCx) != LL_ADC_REG_SEQ_FIXED) + { + LL_ADC_REG_SetSequencerLength(ADCx, pADC_RegInitStruct->SequencerLength); + } + } + else + { + /* Initialization error: ADC instance is not disabled. */ + status = ERROR; + } + return status; +} + +/** + * @brief Set each @ref LL_ADC_REG_InitTypeDef field to default value. + * @param pADC_RegInitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *pADC_RegInitStruct) +{ + /* Set pADC_RegInitStruct fields to default values */ + /* Set fields of ADC group regular */ + /* Note: On this STM32 series, ADC trigger edge is set to value 0x0 by */ + /* setting of trigger source to SW start. */ + pADC_RegInitStruct->TriggerSource = LL_ADC_REG_TRIG_SOFTWARE; + pADC_RegInitStruct->SequencerLength = LL_ADC_REG_SEQ_SCAN_DISABLE; + pADC_RegInitStruct->SequencerDiscont = LL_ADC_REG_SEQ_DISCONT_DISABLE; + pADC_RegInitStruct->ContinuousMode = LL_ADC_REG_CONV_SINGLE; + pADC_RegInitStruct->DMATransfer = LL_ADC_REG_DMA_TRANSFER_NONE; + pADC_RegInitStruct->Overrun = LL_ADC_REG_OVR_DATA_OVERWRITTEN; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ADC1 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_dma.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_dma.c new file mode 100644 index 0000000..2b18c9f --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_dma.c @@ -0,0 +1,367 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_dma.c + * @author MCD Application Team + * @brief DMA LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_dma.h" +#include "stm32g0xx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined (DMA1) || defined (DMA2) + +/** @defgroup DMA_LL DMA + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup DMA_LL_Private_Macros + * @{ + */ +#define IS_LL_DMA_DIRECTION(__VALUE__) (((__VALUE__) == LL_DMA_DIRECTION_PERIPH_TO_MEMORY) || \ + ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) || \ + ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_MEMORY)) + +#define IS_LL_DMA_MODE(__VALUE__) (((__VALUE__) == LL_DMA_MODE_NORMAL) || \ + ((__VALUE__) == LL_DMA_MODE_CIRCULAR)) + +#define IS_LL_DMA_PERIPHINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_PERIPH_INCREMENT) || \ + ((__VALUE__) == LL_DMA_PERIPH_NOINCREMENT)) + +#define IS_LL_DMA_MEMORYINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_MEMORY_INCREMENT) || \ + ((__VALUE__) == LL_DMA_MEMORY_NOINCREMENT)) + +#define IS_LL_DMA_PERIPHDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_PDATAALIGN_BYTE) || \ + ((__VALUE__) == LL_DMA_PDATAALIGN_HALFWORD) || \ + ((__VALUE__) == LL_DMA_PDATAALIGN_WORD)) + +#define IS_LL_DMA_MEMORYDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_MDATAALIGN_BYTE) || \ + ((__VALUE__) == LL_DMA_MDATAALIGN_HALFWORD) || \ + ((__VALUE__) == LL_DMA_MDATAALIGN_WORD)) + +#define IS_LL_DMA_NBDATA(__VALUE__) ((__VALUE__) <= 0x0000FFFFU) + +#define IS_LL_DMA_PERIPHREQUEST(__VALUE__) ((__VALUE__) <= LL_DMAMUX_MAX_REQ) + +#define IS_LL_DMA_PRIORITY(__VALUE__) (((__VALUE__) == LL_DMA_PRIORITY_LOW) || \ + ((__VALUE__) == LL_DMA_PRIORITY_MEDIUM) || \ + ((__VALUE__) == LL_DMA_PRIORITY_HIGH) || \ + ((__VALUE__) == LL_DMA_PRIORITY_VERYHIGH)) + +#if defined(DMA2) +#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1) || \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3) || \ + ((CHANNEL) == LL_DMA_CHANNEL_4) || \ + ((CHANNEL) == LL_DMA_CHANNEL_5) || \ + ((CHANNEL) == LL_DMA_CHANNEL_6) || \ + ((CHANNEL) == LL_DMA_CHANNEL_7))) || \ + (((INSTANCE) == DMA2) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1) || \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3) || \ + ((CHANNEL) == LL_DMA_CHANNEL_4) || \ + ((CHANNEL) == LL_DMA_CHANNEL_5)))) +#else /* DMA1 */ +#if defined(DMA1_Channel7) +#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1) || \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3) || \ + ((CHANNEL) == LL_DMA_CHANNEL_4) || \ + ((CHANNEL) == LL_DMA_CHANNEL_5) || \ + ((CHANNEL) == LL_DMA_CHANNEL_6) || \ + ((CHANNEL) == LL_DMA_CHANNEL_7)))) +#else +#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1) || \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3) || \ + ((CHANNEL) == LL_DMA_CHANNEL_4) || \ + ((CHANNEL) == LL_DMA_CHANNEL_5)))) +#endif /* DMA1_Channel8 */ +#endif /* DMA2 */ +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DMA_LL_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the DMA registers to their default reset values. + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_ALL + * @retval An ErrorStatus enumeration value: + * - SUCCESS: DMA registers are de-initialized + * - ERROR: DMA registers are not de-initialized + */ +ErrorStatus LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel) +{ + ErrorStatus status = SUCCESS; + + /* Check the DMA Instance DMAx and Channel parameters*/ + assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel) || (Channel == LL_DMA_CHANNEL_ALL)); + + if (Channel == LL_DMA_CHANNEL_ALL) + { + if (DMAx == DMA1) + { + /* Force reset of DMA clock */ + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA1); + + /* Release reset of DMA clock */ + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA1); + } +#if defined(DMA2) + else if (DMAx == DMA2) + { + /* Force reset of DMA clock */ + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA2); + + /* Release reset of DMA clock */ + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA2); + } +#endif /* DMA2 */ + else + { + status = ERROR; + } + } + else + { + DMA_Channel_TypeDef *tmp; + + tmp = (DMA_Channel_TypeDef *)(__LL_DMA_GET_CHANNEL_INSTANCE(DMAx, Channel)); + + /* Disable the selected DMAx_Channely */ + CLEAR_BIT(tmp->CCR, DMA_CCR_EN); + + /* Reset DMAx_Channely control register */ + WRITE_REG(tmp->CCR, 0U); + + /* Reset DMAx_Channely remaining bytes register */ + WRITE_REG(tmp->CNDTR, 0U); + + /* Reset DMAx_Channely peripheral address register */ + WRITE_REG(tmp->CPAR, 0U); + + /* Reset DMAx_Channely memory address register */ + WRITE_REG(tmp->CMAR, 0U); + + /* Reset Request register field for DMAx Channel */ + LL_DMA_SetPeriphRequest(DMAx, Channel, LL_DMAMUX_REQ_MEM2MEM); + + if (Channel == LL_DMA_CHANNEL_1) + { + /* Reset interrupt pending bits for DMAx Channel1 */ + LL_DMA_ClearFlag_GI1(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_2) + { + /* Reset interrupt pending bits for DMAx Channel2 */ + LL_DMA_ClearFlag_GI2(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_3) + { + /* Reset interrupt pending bits for DMAx Channel3 */ + LL_DMA_ClearFlag_GI3(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_4) + { + /* Reset interrupt pending bits for DMAx Channel4 */ + LL_DMA_ClearFlag_GI4(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_5) + { + /* Reset interrupt pending bits for DMAx Channel5 */ + LL_DMA_ClearFlag_GI5(DMAx); + } +#if defined(DMA1_Channel6) + else if (Channel == LL_DMA_CHANNEL_6) + { + /* Reset interrupt pending bits for DMAx Channel6 */ + LL_DMA_ClearFlag_GI6(DMAx); + } +#endif /* DMA1_Channel6 */ +#if defined(DMA1_Channel7) + else if (Channel == LL_DMA_CHANNEL_7) + { + /* Reset interrupt pending bits for DMAx Channel7 */ + LL_DMA_ClearFlag_GI7(DMAx); + } +#endif /* DMA1_Channel7 */ + else + { + status = ERROR; + } + } + + return status; +} + +/** + * @brief Initialize the DMA registers according to the specified parameters in DMA_InitStruct. + * @note To convert DMAx_Channely Instance to DMAx Instance and Channely, use helper macros : + * @arg @ref __LL_DMA_GET_INSTANCE + * @arg @ref __LL_DMA_GET_CHANNEL + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param DMA_InitStruct pointer to a @ref LL_DMA_InitTypeDef structure. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: DMA registers are initialized + * - ERROR: Not applicable + */ +ErrorStatus LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct) +{ + /* Check the DMA Instance DMAx and Channel parameters*/ + assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel)); + + /* Check the DMA parameters from DMA_InitStruct */ + assert_param(IS_LL_DMA_DIRECTION(DMA_InitStruct->Direction)); + assert_param(IS_LL_DMA_MODE(DMA_InitStruct->Mode)); + assert_param(IS_LL_DMA_PERIPHINCMODE(DMA_InitStruct->PeriphOrM2MSrcIncMode)); + assert_param(IS_LL_DMA_MEMORYINCMODE(DMA_InitStruct->MemoryOrM2MDstIncMode)); + assert_param(IS_LL_DMA_PERIPHDATASIZE(DMA_InitStruct->PeriphOrM2MSrcDataSize)); + assert_param(IS_LL_DMA_MEMORYDATASIZE(DMA_InitStruct->MemoryOrM2MDstDataSize)); + assert_param(IS_LL_DMA_NBDATA(DMA_InitStruct->NbData)); + assert_param(IS_LL_DMA_PERIPHREQUEST(DMA_InitStruct->PeriphRequest)); + assert_param(IS_LL_DMA_PRIORITY(DMA_InitStruct->Priority)); + + /*---------------------------- DMAx CCR Configuration ------------------------ + * Configure DMAx_Channely: data transfer direction, data transfer mode, + * peripheral and memory increment mode, + * data size alignment and priority level with parameters : + * - Direction: DMA_CCR_DIR and DMA_CCR_MEM2MEM bits + * - Mode: DMA_CCR_CIRC bit + * - PeriphOrM2MSrcIncMode: DMA_CCR_PINC bit + * - MemoryOrM2MDstIncMode: DMA_CCR_MINC bit + * - PeriphOrM2MSrcDataSize: DMA_CCR_PSIZE[1:0] bits + * - MemoryOrM2MDstDataSize: DMA_CCR_MSIZE[1:0] bits + * - Priority: DMA_CCR_PL[1:0] bits + */ + LL_DMA_ConfigTransfer(DMAx, Channel, DMA_InitStruct->Direction | \ + DMA_InitStruct->Mode | \ + DMA_InitStruct->PeriphOrM2MSrcIncMode | \ + DMA_InitStruct->MemoryOrM2MDstIncMode | \ + DMA_InitStruct->PeriphOrM2MSrcDataSize | \ + DMA_InitStruct->MemoryOrM2MDstDataSize | \ + DMA_InitStruct->Priority); + + /*-------------------------- DMAx CMAR Configuration ------------------------- + * Configure the memory or destination base address with parameter : + * - MemoryOrM2MDstAddress: DMA_CMAR_MA[31:0] bits + */ + LL_DMA_SetMemoryAddress(DMAx, Channel, DMA_InitStruct->MemoryOrM2MDstAddress); + + /*-------------------------- DMAx CPAR Configuration ------------------------- + * Configure the peripheral or source base address with parameter : + * - PeriphOrM2MSrcAddress: DMA_CPAR_PA[31:0] bits + */ + LL_DMA_SetPeriphAddress(DMAx, Channel, DMA_InitStruct->PeriphOrM2MSrcAddress); + + /*--------------------------- DMAx CNDTR Configuration ----------------------- + * Configure the peripheral base address with parameter : + * - NbData: DMA_CNDTR_NDT[15:0] bits + */ + LL_DMA_SetDataLength(DMAx, Channel, DMA_InitStruct->NbData); + + /*--------------------------- DMAMUXx CCR Configuration ---------------------- + * Configure the DMA request for DMA Channels on DMAMUX Channel x with parameter : + * - PeriphRequest: DMA_CxCR[7:0] bits + */ + LL_DMA_SetPeriphRequest(DMAx, Channel, DMA_InitStruct->PeriphRequest); + + return SUCCESS; +} + +/** + * @brief Set each @ref LL_DMA_InitTypeDef field to default value. + * @param DMA_InitStruct Pointer to a @ref LL_DMA_InitTypeDef structure. + * @retval None + */ +void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct) +{ + /* Set DMA_InitStruct fields to default values */ + DMA_InitStruct->PeriphOrM2MSrcAddress = 0x00000000U; + DMA_InitStruct->MemoryOrM2MDstAddress = 0x00000000U; + DMA_InitStruct->Direction = LL_DMA_DIRECTION_PERIPH_TO_MEMORY; + DMA_InitStruct->Mode = LL_DMA_MODE_NORMAL; + DMA_InitStruct->PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT; + DMA_InitStruct->MemoryOrM2MDstIncMode = LL_DMA_MEMORY_NOINCREMENT; + DMA_InitStruct->PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_BYTE; + DMA_InitStruct->MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_BYTE; + DMA_InitStruct->NbData = 0x00000000U; + DMA_InitStruct->PeriphRequest = LL_DMAMUX_REQ_MEM2MEM; + DMA_InitStruct->Priority = LL_DMA_PRIORITY_LOW; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMA1 || DMA2 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_rcc.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_rcc.c new file mode 100644 index 0000000..3575197 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_rcc.c @@ -0,0 +1,1380 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_rcc.c + * @author MCD Application Team + * @brief RCC LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_ll_rcc.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ +/** @addtogroup STM32G0xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @addtogroup RCC_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCC_LL_Private_Macros + * @{ + */ +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_USART2_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_USART3_CLKSOURCE)) +#elif defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G070xx) +#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_USART2_CLKSOURCE)) +#else +#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_USART1_CLKSOURCE) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(LPUART1) && defined(LPUART2) +#define IS_LL_RCC_LPUART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_LPUART1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_LPUART2_CLKSOURCE)) +#elif defined(LPUART1) +#define IS_LL_RCC_LPUART_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_LPUART1_CLKSOURCE) +#endif /* LPUART1 && LPUART2 */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2C1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_I2C2_CLKSOURCE)) +#else +#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_I2C1_CLKSOURCE) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(LPTIM1) || defined(LPTIM2) +#define IS_LL_RCC_LPTIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_LPTIM1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_LPTIM2_CLKSOURCE)) +#endif /* LPTIM1 || LPTIM2 */ + +#if defined(RNG) +#define IS_LL_RCC_RNG_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_RNG_CLKSOURCE)) +#endif /* RNG */ + +#define IS_LL_RCC_ADC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_ADC_CLKSOURCE)) + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define IS_LL_RCC_I2S_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2S1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_I2S2_CLKSOURCE)) +#else +#define IS_LL_RCC_I2S_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2S1_CLKSOURCE)) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(CEC) +#define IS_LL_RCC_CEC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_CEC_CLKSOURCE)) +#endif /* CEC */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +#define IS_LL_RCC_USB_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USB_CLKSOURCE)) +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(FDCAN1) || defined(FDCAN2) +#define IS_LL_RCC_FDCAN_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_FDCAN_CLKSOURCE)) +#endif /* FDCAN1 || FDCAN2 */ + +#if defined(RCC_CCIPR_TIM1SEL) && defined(RCC_CCIPR_TIM15SEL) +#define IS_LL_RCC_TIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_TIM1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_TIM15_CLKSOURCE)) +#elif defined(RCC_CCIPR_TIM1SEL) +#define IS_LL_RCC_TIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_TIM1_CLKSOURCE)) +#endif /* RCC_CCIPR_TIM1SEL */ + + + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup RCC_LL_Private_Functions RCC Private functions + * @{ + */ +static uint32_t RCC_GetSystemClockFreq(void); +static uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency); +static uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency); +static uint32_t RCC_PLL_GetFreqDomain_SYS(void); +static uint32_t RCC_PLL_GetFreqDomain_ADC(void); +static uint32_t RCC_PLL_GetFreqDomain_I2S1(void); +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +static uint32_t RCC_PLL_GetFreqDomain_I2S2(void); +static uint32_t RCC_PLL_GetFreqDomain_USB(void); +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ +#if defined(FDCAN1) || defined(FDCAN2) +static uint32_t RCC_PLL_GetFreqDomain_FDCAN(void); +#endif /* FDCAN1 || FDCAN2 */ +#if defined(RNG) +static uint32_t RCC_PLL_GetFreqDomain_RNG(void); +#endif /* RNG */ +#if defined(RCC_PLLQ_SUPPORT) && defined(RCC_CCIPR_TIM1SEL) +static uint32_t RCC_PLL_GetFreqDomain_TIM1(void); +#endif /* RCC_PLLQ_SUPPORT && RCC_CCIPR_TIM1SEL */ +#if defined(RCC_CCIPR_TIM15SEL) +static uint32_t RCC_PLL_GetFreqDomain_TIM15(void); +#endif /* RCC_CCIPR_TIM15SEL */ +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup RCC_LL_EF_Init + * @{ + */ + +/** + * @brief Reset the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI ON and used as system clock source + * - HSE and PLL OFF + * - AHB and APB1 prescaler set to 1. + * - CSS, MCO OFF + * - All interrupts disabled + * @note This function does not modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RCC registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_RCC_DeInit(void) +{ + /* Set HSION bit and wait for HSI READY bit */ + LL_RCC_HSI_Enable(); + while (LL_RCC_HSI_IsReady() != 1U) + {} + + /* Set HSITRIM bits to reset value*/ + LL_RCC_HSI_SetCalibTrimming(0x40U); + + /* Reset CFGR register */ + LL_RCC_WriteReg(CFGR, 0x00000000U); + + /* Reset whole CR register but HSI in 2 steps in case HSEBYP is set */ + LL_RCC_WriteReg(CR, RCC_CR_HSION); + while (LL_RCC_HSE_IsReady() != 0U) + {} + LL_RCC_WriteReg(CR, RCC_CR_HSION); + + /* Wait for PLL READY bit to be reset */ + while (LL_RCC_PLL_IsReady() != 0U) + {} + + /* Reset PLLCFGR register */ + LL_RCC_WriteReg(PLLCFGR, 16U << RCC_PLLCFGR_PLLN_Pos); + + /* Disable all interrupts */ + LL_RCC_WriteReg(CIER, 0x00000000U); + + /* Clear all interrupts flags */ + LL_RCC_WriteReg(CICR, 0xFFFFFFFFU); + + return SUCCESS; +} + +/** + * @} + */ + +/** @addtogroup RCC_LL_EF_Get_Freq + * @brief Return the frequencies of different on chip clocks; System, AHB and APB1 buses clocks + * and different peripheral clocks available on the device. + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE divided by HSI division factor(**) + * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(***) + * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(***) + * or HSI_VALUE(**) multiplied/divided by the PLL factors. + * @note (**) HSI_VALUE is a constant defined in this file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (***) HSE_VALUE is a constant defined in this file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * @note The result of this function could be incorrect when using fractional + * value for HSE crystal. + * @note This function can be used by the user application to compute the + * baud-rate for the communication peripherals or configure other parameters. + * @{ + */ + +/** + * @brief Return the frequencies of different on chip clocks; System, AHB and APB1 buses clocks + * @note Each time SYSCLK, HCLK and/or PCLK1 clock changes, this function + * must be called to update structure fields. Otherwise, any + * configuration based on this function will be incorrect. + * @param RCC_Clocks pointer to a @ref LL_RCC_ClocksTypeDef structure which will hold the clocks frequencies + * @retval None + */ +void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks) +{ + /* Get SYSCLK frequency */ + RCC_Clocks->SYSCLK_Frequency = RCC_GetSystemClockFreq(); + + /* HCLK clock frequency */ + RCC_Clocks->HCLK_Frequency = RCC_GetHCLKClockFreq(RCC_Clocks->SYSCLK_Frequency); + + /* PCLK1 clock frequency */ + RCC_Clocks->PCLK1_Frequency = RCC_GetPCLK1ClockFreq(RCC_Clocks->HCLK_Frequency); +} + +/** + * @brief Return USARTx clock frequency + * @param USARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE + * @arg @ref LL_RCC_USART2_CLKSOURCE + * @arg @ref LL_RCC_USART3_CLKSOURCE + * @retval USART clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready + */ +uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource) +{ + uint32_t usart_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_USART_CLKSOURCE(USARTxSource)); + + if (USARTxSource == LL_RCC_USART1_CLKSOURCE) + { + /* USART1CLK clock frequency */ + switch (LL_RCC_GetUSARTClockSource(USARTxSource)) + { + case LL_RCC_USART1_CLKSOURCE_SYSCLK: /* USART1 Clock is System Clock */ + usart_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_USART1_CLKSOURCE_HSI: /* USART1 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + usart_frequency = HSI_VALUE; + } + break; + + case LL_RCC_USART1_CLKSOURCE_LSE: /* USART1 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + usart_frequency = LSE_VALUE; + } + break; + + case LL_RCC_USART1_CLKSOURCE_PCLK1: /* USART1 Clock is PCLK1 */ + default: + usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#if defined(RCC_CCIPR_USART2SEL) + else if (USARTxSource == LL_RCC_USART2_CLKSOURCE) + { + /* USART2CLK clock frequency */ + switch (LL_RCC_GetUSARTClockSource(USARTxSource)) + { + case LL_RCC_USART2_CLKSOURCE_SYSCLK: /* USART2 Clock is System Clock */ + usart_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_USART2_CLKSOURCE_HSI: /* USART2 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + usart_frequency = HSI_VALUE; + } + break; + + case LL_RCC_USART2_CLKSOURCE_LSE: /* USART2 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + usart_frequency = LSE_VALUE; + } + break; + + case LL_RCC_USART2_CLKSOURCE_PCLK1: /* USART2 Clock is PCLK1 */ + default: + usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#endif /* RCC_CCIPR_USART2SEL */ +#if defined(RCC_CCIPR_USART3SEL) + else if (USARTxSource == LL_RCC_USART3_CLKSOURCE) + { + /* USART3CLK clock frequency */ + switch (LL_RCC_GetUSARTClockSource(USARTxSource)) + { + case LL_RCC_USART3_CLKSOURCE_SYSCLK: /* USART3 Clock is System Clock */ + usart_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_USART3_CLKSOURCE_HSI: /* USART3 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + usart_frequency = HSI_VALUE; + } + break; + + case LL_RCC_USART3_CLKSOURCE_LSE: /* USART3 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + usart_frequency = LSE_VALUE; + } + break; + + case LL_RCC_USART3_CLKSOURCE_PCLK1: /* USART3 Clock is PCLK1 */ + default: + usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#endif /* RCC_CCIPR_USART3SEL */ + else + { + /* nothing to do */ + } + return usart_frequency; +} + +/** + * @brief Return I2Cx clock frequency + * @param I2CxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE + * @retval I2C clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that HSI oscillator is not ready + */ +uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource) +{ + uint32_t i2c_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_I2C_CLKSOURCE(I2CxSource)); + + if (I2CxSource == LL_RCC_I2C1_CLKSOURCE) + { + /* I2C1 CLK clock frequency */ + switch (LL_RCC_GetI2CClockSource(I2CxSource)) + { + case LL_RCC_I2C1_CLKSOURCE_SYSCLK: /* I2C1 Clock is System Clock */ + i2c_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_I2C1_CLKSOURCE_HSI: /* I2C1 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + i2c_frequency = HSI_VALUE; + } + break; + + case LL_RCC_I2C1_CLKSOURCE_PCLK1: /* I2C1 Clock is PCLK1 */ + default: + i2c_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#if defined(RCC_CCIPR_I2C2SEL) + else if (I2CxSource == LL_RCC_I2C2_CLKSOURCE) + { + /* I2C2 CLK clock frequency */ + switch (LL_RCC_GetI2CClockSource(I2CxSource)) + { + case LL_RCC_I2C2_CLKSOURCE_SYSCLK: /* I2C2 Clock is System Clock */ + i2c_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_I2C2_CLKSOURCE_HSI: /* I2C2 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + i2c_frequency = HSI_VALUE; + } + break; + + case LL_RCC_I2C2_CLKSOURCE_PCLK1: /* I2C2 Clock is PCLK1 */ + default: + i2c_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#endif /* RCC_CCIPR_I2C2SEL */ + else + { + /* nothing to do */ + } + + return i2c_frequency; +} + +/** + * @brief Return I2Sx clock frequency + * @param I2SxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE + * @retval I2S clock frequency (in Hz) + * @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ +uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource) +{ + uint32_t i2s_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_I2S_CLKSOURCE(I2SxSource)); + + if (I2SxSource == LL_RCC_I2S1_CLKSOURCE) + { + /* I2S1 CLK clock frequency */ + switch (LL_RCC_GetI2SClockSource(I2SxSource)) + { + case LL_RCC_I2S1_CLKSOURCE_HSI: /* I2S1 Clock is HSI */ + i2s_frequency = HSI_VALUE; + break; + + case LL_RCC_I2S1_CLKSOURCE_PLL: /* I2S1 Clock is PLL"P" */ + if (LL_RCC_PLL_IsReady() == 1U) + { + if (LL_RCC_PLL_IsEnabledDomain_I2S1() == 1U) + { + i2s_frequency = RCC_PLL_GetFreqDomain_I2S1(); + } + } + break; + + + case LL_RCC_I2S1_CLKSOURCE_PIN: /* I2S1 Clock is External clock */ + i2s_frequency = EXTERNAL_CLOCK_VALUE; + break; + + case LL_RCC_I2S1_CLKSOURCE_SYSCLK: /* I2S1 Clock is System Clock */ + default: + i2s_frequency = RCC_GetSystemClockFreq(); + break; + } + } +#if defined(RCC_CCIPR2_I2S2SEL) + else if (I2SxSource == LL_RCC_I2S2_CLKSOURCE) + { + /* I2S2 CLK clock frequency */ + switch (LL_RCC_GetI2SClockSource(I2SxSource)) + { + case LL_RCC_I2S2_CLKSOURCE_HSI: /* I2S2 Clock is HSI */ + i2s_frequency = HSI_VALUE; + break; + + case LL_RCC_I2S2_CLKSOURCE_PLL: /* I2S2 Clock is PLL"P" */ + if (LL_RCC_PLL_IsReady() == 1U) + { + if (LL_RCC_PLL_IsEnabledDomain_I2S2() == 1U) + { + i2s_frequency = RCC_PLL_GetFreqDomain_I2S2(); + } + } + break; + + case LL_RCC_I2S2_CLKSOURCE_PIN: /* I2S2 Clock is External clock */ + i2s_frequency = EXTERNAL_CLOCK_VALUE; + break; + + case LL_RCC_I2S2_CLKSOURCE_SYSCLK: /* I2S2 Clock is System Clock */ + default: + i2s_frequency = RCC_GetSystemClockFreq(); + break; + } + } +#endif /* RCC_CCIPR2_I2S2SEL */ + else + { + } + return i2s_frequency; +} + +#if defined(LPUART1) || defined(LPUART2) +/** + * @brief Return LPUARTx clock frequency + * @param LPUARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE + * @arg @ref LL_RCC_LPUART2_CLKSOURCE (*) + * @retval LPUART clock frequency (in Hz) + * @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready + * (*) feature not available on all devices + */ +uint32_t LL_RCC_GetLPUARTClockFreq(uint32_t LPUARTxSource) +{ + uint32_t lpuart_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_LPUART_CLKSOURCE(LPUARTxSource)); + + if (LPUARTxSource == LL_RCC_LPUART1_CLKSOURCE) + { + /* LPUART1CLK clock frequency */ + switch (LL_RCC_GetLPUARTClockSource(LPUARTxSource)) + { + case LL_RCC_LPUART1_CLKSOURCE_SYSCLK: /* LPUART1 Clock is System Clock */ + lpuart_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_LPUART1_CLKSOURCE_HSI: /* LPUART1 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + lpuart_frequency = HSI_VALUE; + } + break; + + case LL_RCC_LPUART1_CLKSOURCE_LSE: /* LPUART1 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + lpuart_frequency = LSE_VALUE; + } + break; + + case LL_RCC_LPUART1_CLKSOURCE_PCLK1: /* LPUART1 Clock is PCLK1 */ + default: + lpuart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#if defined(LPUART2) + else if (LPUARTxSource == LL_RCC_LPUART2_CLKSOURCE) + { + /* LPUART2CLK clock frequency */ + switch (LL_RCC_GetLPUARTClockSource(LPUARTxSource)) + { + case LL_RCC_LPUART2_CLKSOURCE_SYSCLK: /* LPUART2 Clock is System Clock */ + lpuart_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_LPUART2_CLKSOURCE_HSI: /* LPUART2 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + lpuart_frequency = HSI_VALUE; + } + break; + + case LL_RCC_LPUART2_CLKSOURCE_LSE: /* LPUART2 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + lpuart_frequency = LSE_VALUE; + } + break; + + case LL_RCC_LPUART2_CLKSOURCE_PCLK1: /* LPUART2 Clock is PCLK1 */ + default: + lpuart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#endif /* LPUART2 */ + else + { + /*nothing to do*/ + } + + return lpuart_frequency; +} +#endif /* LPUART1 */ + +#if defined(LPTIM1) && defined(LPTIM2) +/** + * @brief Return LPTIMx clock frequency + * @param LPTIMxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE + * @retval LPTIM clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI, LSI or LSE) is not ready + */ +uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource) +{ + uint32_t lptim_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_LPTIM_CLKSOURCE(LPTIMxSource)); + + if (LPTIMxSource == LL_RCC_LPTIM1_CLKSOURCE) + { + /* LPTIM1CLK clock frequency */ + switch (LL_RCC_GetLPTIMClockSource(LPTIMxSource)) + { + case LL_RCC_LPTIM1_CLKSOURCE_LSI: /* LPTIM1 Clock is LSI Osc. */ + if (LL_RCC_LSI_IsReady() == 1U) + { + lptim_frequency = LSI_VALUE; + } + break; + + case LL_RCC_LPTIM1_CLKSOURCE_HSI: /* LPTIM1 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + lptim_frequency = HSI_VALUE; + } + break; + + case LL_RCC_LPTIM1_CLKSOURCE_LSE: /* LPTIM1 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + lptim_frequency = LSE_VALUE; + } + break; + + case LL_RCC_LPTIM1_CLKSOURCE_PCLK1: /* LPTIM1 Clock is PCLK1 */ + default: + lptim_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } + else + { + /* LPTIM2CLK clock frequency */ + switch (LL_RCC_GetLPTIMClockSource(LPTIMxSource)) + { + case LL_RCC_LPTIM2_CLKSOURCE_LSI: /* LPTIM2 Clock is LSI Osc. */ + if (LL_RCC_LSI_IsReady() == 1U) + { + lptim_frequency = LSI_VALUE; + } + break; + + case LL_RCC_LPTIM2_CLKSOURCE_HSI: /* LPTIM2 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + lptim_frequency = HSI_VALUE; + } + break; + + case LL_RCC_LPTIM2_CLKSOURCE_LSE: /* LPTIM2 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + lptim_frequency = LSE_VALUE; + } + break; + + case LL_RCC_LPTIM2_CLKSOURCE_PCLK1: /* LPTIM2 Clock is PCLK1 */ + default: + lptim_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } + + return lptim_frequency; +} +#endif /* LPTIM1 && LPTIM2 */ + +#if defined(RCC_CCIPR_TIM1SEL) || defined(RCC_CCIPR_TIM15SEL) +/** + * @brief Return TIMx clock frequency + * @param TIMxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_TIM1_CLKSOURCE + * @if defined(STM32G081xx) + * @arg @ref LL_RCC_TIM15_CLKSOURCE + * @endif + * @retval TIMx clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready + */ +uint32_t LL_RCC_GetTIMClockFreq(uint32_t TIMxSource) +{ + uint32_t tim_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_TIM_CLKSOURCE(TIMxSource)); + + if (TIMxSource == LL_RCC_TIM1_CLKSOURCE) + { + /* TIM1CLK clock frequency */ + switch (LL_RCC_GetTIMClockSource(TIMxSource)) + { + case LL_RCC_TIM1_CLKSOURCE_PLL: /* TIM1 Clock is PLLQ */ + if (LL_RCC_PLL_IsReady() == 1U) + { + if (LL_RCC_PLL_IsEnabledDomain_TIM1() == 1U) + { + tim_frequency = RCC_PLL_GetFreqDomain_TIM1(); + } + } + break; + + case LL_RCC_TIM1_CLKSOURCE_PCLK1: /* TIM1 Clock is PCLK1 */ + default: + tim_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } +#if defined(TIM15) + else + { + if (TIMxSource == LL_RCC_TIM15_CLKSOURCE) + { + /* TIM15CLK clock frequency */ + switch (LL_RCC_GetTIMClockSource(TIMxSource)) + { + case LL_RCC_TIM15_CLKSOURCE_PLL: /* TIM1 Clock is PLLQ */ + if (LL_RCC_PLL_IsReady() == 1U) + { + if (LL_RCC_PLL_IsEnabledDomain_TIM15() == 1U) + { + tim_frequency = RCC_PLL_GetFreqDomain_TIM15(); + } + } + break; + + case LL_RCC_TIM15_CLKSOURCE_PCLK1: /* TIM15 Clock is PCLK1 */ + default: + tim_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } + } +#endif /* TIM15 */ + return tim_frequency; +} +#endif /* RCC_CCIPR_TIM1SEL && RCC_CCIPR_TIM15SEL */ + + +#if defined(RNG) +/** + * @brief Return RNGx clock frequency + * @param RNGxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE + * @retval RNG clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI) or PLL is not ready + * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected + */ +uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource) +{ + uint32_t rng_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + uint32_t rngdiv; + + /* Check parameter */ + assert_param(IS_LL_RCC_RNG_CLKSOURCE(RNGxSource)); + + /* RNGCLK clock frequency */ + switch (LL_RCC_GetRNGClockSource(RNGxSource)) + { + case LL_RCC_RNG_CLKSOURCE_PLL: /* PLL clock used as RNG clock source */ + if (LL_RCC_PLL_IsReady() == 1U) + { + if (LL_RCC_PLL_IsEnabledDomain_RNG() == 1U) + { + rng_frequency = RCC_PLL_GetFreqDomain_RNG(); + rngdiv = (1UL << ((READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGDIV)) >> RCC_CCIPR_RNGDIV_Pos)); + rng_frequency = (rng_frequency / rngdiv); + } + } + break; + + case LL_RCC_RNG_CLKSOURCE_HSI_DIV8: /* HSI clock divided by 8 used as RNG clock source */ + rng_frequency = HSI_VALUE / 8U; + rngdiv = (1UL << ((READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGDIV)) >> RCC_CCIPR_RNGDIV_Pos)); + rng_frequency = (rng_frequency / rngdiv); + break; + case LL_RCC_RNG_CLKSOURCE_SYSCLK: /* SYSCLK clock used as RNG clock source */ + rng_frequency = RCC_GetSystemClockFreq(); + rngdiv = (1UL << ((READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGDIV)) >> RCC_CCIPR_RNGDIV_Pos)); + rng_frequency = (rng_frequency / rngdiv); + break; + + case LL_RCC_RNG_CLKSOURCE_NONE: /* No clock used as RNG clock source */ + default: + rng_frequency = LL_RCC_PERIPH_FREQUENCY_NA; + break; + + } + + return rng_frequency; +} +#endif /* RNG */ + +#if defined(CEC) +/** + * @brief Return CEC clock frequency + * @param CECxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE + * @retval CEC clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready + */ +uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource) +{ + uint32_t cec_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_CEC_CLKSOURCE(CECxSource)); + + /* CECCLK clock frequency */ + switch (LL_RCC_GetCECClockSource(CECxSource)) + { + case LL_RCC_CEC_CLKSOURCE_LSE: /* CEC Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + cec_frequency = LSE_VALUE; + } + break; + + case LL_RCC_CEC_CLKSOURCE_HSI_DIV488: /* CEC Clock is HSI Osc. */ + default: + if (LL_RCC_HSI_IsReady() == 1U) + { + cec_frequency = (HSI_VALUE / 488U); + } + break; + } + + return cec_frequency; +} +#endif /* CEC */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** + * @brief Return FDCANx clock frequency + * @param FDCANxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE + * @retval FDCANx clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI, LSI or LSE) is not ready + */ +uint32_t LL_RCC_GetFDCANClockFreq(uint32_t FDCANxSource) +{ + uint32_t fdcan_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_FDCAN_CLKSOURCE(FDCANxSource)); + + /* FDCANCLK clock frequency */ + switch (LL_RCC_GetFDCANClockSource(FDCANxSource)) + { + case LL_RCC_FDCAN_CLKSOURCE_PLL: /* FDCAN Clock is PLL "Q" Osc. */ + if (LL_RCC_PLL_IsReady() == 1U) + { + if (LL_RCC_PLL_IsEnabledDomain_FDCAN() == 1U) + { + fdcan_frequency = RCC_PLL_GetFreqDomain_FDCAN(); + } + } + break; + + case LL_RCC_FDCAN_CLKSOURCE_HSE: /* FDCAN Clock is HSE Osc. */ + if (LL_RCC_HSE_IsReady() == 1U) + { + fdcan_frequency = HSE_VALUE; + } + break; + + case LL_RCC_FDCAN_CLKSOURCE_PCLK1: /* FDCAN Clock is PCLK1 */ + default: + fdcan_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + + return fdcan_frequency; +} +#endif /* FDCAN1 || FDCAN2 */ + +/** + * @brief Return ADCx clock frequency + * @param ADCxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE + * @retval ADC clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI) or PLL is not ready + * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected + */ +uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource) +{ + uint32_t adc_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_ADC_CLKSOURCE(ADCxSource)); + + /* ADCCLK clock frequency */ + switch (LL_RCC_GetADCClockSource(ADCxSource)) + { + case LL_RCC_ADC_CLKSOURCE_SYSCLK: /* SYSCLK clock used as ADC clock source */ + adc_frequency = RCC_GetSystemClockFreq(); + break; + case LL_RCC_ADC_CLKSOURCE_HSI : /* HSI clock used as ADC clock source */ + adc_frequency = HSI_VALUE; + break; + + case LL_RCC_ADC_CLKSOURCE_PLL: /* PLLP clock used as ADC clock source */ + if (LL_RCC_PLL_IsReady() == 1U) + { + if (LL_RCC_PLL_IsEnabledDomain_ADC() == 1U) + { + adc_frequency = RCC_PLL_GetFreqDomain_ADC(); + } + } + break; + default: + adc_frequency = LL_RCC_PERIPH_FREQUENCY_NA; + break; + } + + return adc_frequency; +} + +/** + * @brief Return RTC clock frequency + * @retval RTC clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillators (LSI, LSE or HSE) are not ready + * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected + */ +uint32_t LL_RCC_GetRTCClockFreq(void) +{ + uint32_t rtc_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* RTCCLK clock frequency */ + switch (LL_RCC_GetRTCClockSource()) + { + case LL_RCC_RTC_CLKSOURCE_LSE: /* LSE clock used as RTC clock source */ + if (LL_RCC_LSE_IsReady() == 1U) + { + rtc_frequency = LSE_VALUE; + } + break; + + case LL_RCC_RTC_CLKSOURCE_LSI: /* LSI clock used as RTC clock source */ + if (LL_RCC_LSI_IsReady() == 1U) + { + rtc_frequency = LSI_VALUE; + } + break; + + case LL_RCC_RTC_CLKSOURCE_HSE_DIV32: /* HSE clock used as ADC clock source */ + rtc_frequency = HSE_VALUE / 32U; + break; + + case LL_RCC_RTC_CLKSOURCE_NONE: /* No clock used as RTC clock source */ + default: + rtc_frequency = LL_RCC_PERIPH_FREQUENCY_NA; + break; + } + + return rtc_frequency; +} + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Return USBx clock frequency + * @param USBxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE + * @retval USB clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI48) or PLL is not ready + * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected + */ +uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource) +{ + uint32_t usb_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_USB_CLKSOURCE(USBxSource)); + + /* USBCLK clock frequency */ + switch (LL_RCC_GetUSBClockSource(USBxSource)) + { +#if defined(RCC_HSI48_SUPPORT) + case LL_RCC_USB_CLKSOURCE_HSI48: /* HSI48 used as USB clock source */ + if (LL_RCC_HSI48_IsReady() != 0U) + { + usb_frequency = HSI48_VALUE; + } + break; +#endif /* RCC_HSI48_SUPPORT */ + + case LL_RCC_USB_CLKSOURCE_HSE: /* HSE used as USB clock source */ + if (LL_RCC_HSE_IsReady() != 0U) + { + usb_frequency = HSE_VALUE; + } + break; + + case LL_RCC_USB_CLKSOURCE_PLL: /* PLL clock used as USB clock source */ + if (LL_RCC_PLL_IsReady() != 0U) + { + if (LL_RCC_PLL_IsEnabledDomain_USB() != 0U) + { + usb_frequency = RCC_PLL_GetFreqDomain_USB(); + } + } + break; + + default: + usb_frequency = LL_RCC_PERIPH_FREQUENCY_NA; + break; + } + + return usb_frequency; +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx) */ + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup RCC_LL_Private_Functions + * @{ + */ + +/** + * @brief Return SYSTEM clock frequency + * @retval SYSTEM clock frequency (in Hz) + */ +static uint32_t RCC_GetSystemClockFreq(void) +{ + uint32_t frequency; + uint32_t hsidiv; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (LL_RCC_GetSysClkSource()) + { + case LL_RCC_SYS_CLKSOURCE_STATUS_HSE: /* HSE used as system clock source */ + frequency = HSE_VALUE; + break; + + case LL_RCC_SYS_CLKSOURCE_STATUS_PLL: /* PLL used as system clock source */ + frequency = RCC_PLL_GetFreqDomain_SYS(); + break; + + case LL_RCC_SYS_CLKSOURCE_STATUS_HSI: /* HSI used as system clock source */ + default: + hsidiv = (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV)) >> RCC_CR_HSIDIV_Pos)); + frequency = (HSI_VALUE / hsidiv); + break; + } + + return frequency; +} + +/** + * @brief Return HCLK clock frequency + * @param SYSCLK_Frequency SYSCLK clock frequency + * @retval HCLK clock frequency (in Hz) + */ +static uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency) +{ + /* HCLK clock frequency */ + return __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, LL_RCC_GetAHBPrescaler()); +} + +/** + * @brief Return PCLK1 clock frequency + * @param HCLK_Frequency HCLK clock frequency + * @retval PCLK1 clock frequency (in Hz) + */ +static uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency) +{ + /* PCLK1 clock frequency */ + return __LL_RCC_CALC_PCLK1_FREQ(HCLK_Frequency, LL_RCC_GetAPB1Prescaler()); +} +/** + * @brief Return PLL clock frequency used for system domain + * @retval PLL clock frequency (in Hz) + */ +static uint32_t RCC_PLL_GetFreqDomain_SYS(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + pllinputfreq = HSI_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetR()); +} +/** + * @brief Return PLL clock frequency used for ADC domain + * @retval PLL clock frequency (in Hz) + */ +static uint32_t RCC_PLL_GetFreqDomain_ADC(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN + ADC Domain clock = PLL_VCO / PLLP + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_ADC_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetP()); +} + +#if defined(FDCAN1) || defined(FDCAN2) +/** + * @brief Return PLL clock frequency used for FDCAN domain + * @retval PLL clock frequency (in Hz) + */ +static uint32_t RCC_PLL_GetFreqDomain_FDCAN(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM ) * PLLN + + FDCAN Domain clock = PLL_VCO / PLLQ + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_FDCAN_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetQ()); +} +#endif /* FDCAN1 || FDCAN2 */ + +/** + * @brief Return PLL clock frequency used for I2S1 domain + * @retval PLL clock frequency (in Hz) + */ +static uint32_t RCC_PLL_GetFreqDomain_I2S1(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN + I2S1 Domain clock = PLL_VCO / PLLP + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_I2S1_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetP()); +} + +#if defined(RCC_CCIPR2_I2S2SEL) +/** + * @brief Return PLL clock frequency used for I2S2 domain + * @retval PLL clock frequency (in Hz) + */ +static uint32_t RCC_PLL_GetFreqDomain_I2S2(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN + I2S2 Domain clock = PLL_VCO / PLLP + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_I2S2_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetP()); +} +#endif /* RCC_CCIPR2_I2S2SEL */ + +#if defined(RNG) +/** + * @brief Return PLL clock frequency used for RNG domain + * @retval PLL clock frequency (in Hz) + */ +static uint32_t RCC_PLL_GetFreqDomain_RNG(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM ) * PLLN + + RNG Domain clock = PLL_VCO / PLLQ + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_RNG_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetQ()); +} +#endif /* RNG */ + +#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx) +/** + * @brief Return PLL clock frequency used for USB domain + * @retval PLL clock frequency (in Hz) + */ +static uint32_t RCC_PLL_GetFreqDomain_USB(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM ) * PLLN + + RNG Domain clock = PLL_VCO / PLLQ + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_USB_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetQ()); +} +#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */ + +#if defined(RCC_PLLQ_SUPPORT) && defined(RCC_CCIPR_TIM1SEL) +/** + * @brief Return PLL clock frequency used for TIM1 domain + * @retval PLL clock frequency (in Hz) + */ +static uint32_t RCC_PLL_GetFreqDomain_TIM1(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM ) * PLLN + + TIM1 Domain clock = PLL_VCO / PLLQ + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_TIM1_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetQ()); +} +#endif /* RCC_PLLQ_SUPPORT */ + +#if defined(RCC_CCIPR_TIM15SEL) +/** + * @brief Return PLL clock frequency used for TIM15 domain + * @retval PLL clock frequency (in Hz) + */ +static uint32_t RCC_PLL_GetFreqDomain_TIM15(void) +{ + uint32_t pllinputfreq; + uint32_t pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM ) * PLLN + + TIM15 Domain clock = PLL_VCO / PLLQ + */ + pllsource = LL_RCC_PLL_GetMainSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_TIM15_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetQ()); +} +#endif /* RCC_CCIPR_TIM15SEL */ +/** + * @} + */ + +/** + * @} + */ + +#endif /* RCC */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + diff --git a/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_usb.c b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_usb.c new file mode 100644 index 0000000..da131b2 --- /dev/null +++ b/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_usb.c @@ -0,0 +1,1451 @@ +/** + ****************************************************************************** + * @file stm32g0xx_ll_usb.c + * @author MCD Application Team + * @brief USB Low Layer HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Initialization/de-initialization functions + * + I/O operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Fill parameters of Init structure in USB_CfgTypeDef structure. + + (#) Call USB_CoreInit() API to initialize the USB Core peripheral. + + (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes. + + @endverbatim + + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" + +/** @addtogroup STM32G0xx_LL_USB_DRIVER + * @{ + */ + +#if defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) +#if defined (USB_DRD_FS) +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +static HAL_StatusTypeDef USB_CoreReset(USB_DRD_TypeDef *USBx); +#if (USE_USB_DOUBLE_BUFFER == 1U) +static HAL_StatusTypeDef USB_HC_BULK_DB_StartXfer(USB_DRD_TypeDef *USBx, + USB_DRD_HCTypeDef *hc, + uint32_t ch_reg, + uint32_t *len); + +static HAL_StatusTypeDef USB_HC_ISO_DB_StartXfer(USB_DRD_TypeDef *USBx, + USB_DRD_HCTypeDef *hc, + uint32_t len); +#endif /* (USE_USB_DOUBLE_BUFFER == 1U) */ + +/** + * @brief Reset the USB Core (needed after USB clock settings change) + * @param USBx Selected device + * @retval HAL status + */ +static HAL_StatusTypeDef USB_CoreReset(USB_DRD_TypeDef *USBx) +{ + /* Disable Host Mode */ + USBx->CNTR &= ~USB_CNTR_HOST; + + /* Force Reset IP */ + USBx->CNTR |= USB_CNTR_USBRST; + + return HAL_OK; +} + +/** + * @brief Initializes the USB Core + * @param USBx USB Instance + * @param cfg pointer to a USB_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_CoreInit(USB_DRD_TypeDef *USBx, USB_DRD_CfgTypeDef cfg) +{ + HAL_StatusTypeDef ret; + UNUSED(cfg); + + if (USBx == NULL) + { + return HAL_ERROR; + } + + /* Reset after a PHY select */ + ret = USB_CoreReset(USBx); + + /* Clear pending interrupts */ + USBx->ISTR = 0U; + + return ret; +} + +/** + * @brief USB_EnableGlobalInt + * Enables the controller's Global Int in the AHB Config reg + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_EnableGlobalInt(USB_DRD_TypeDef *USBx) +{ + uint32_t winterruptmask; + + /* Clear pending interrupts */ + USBx->ISTR = 0U; + + /* Set winterruptmask variable */ + winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM | + USB_CNTR_SUSPM | USB_CNTR_ERRM | + USB_CNTR_SOFM | USB_CNTR_ESOFM | + USB_CNTR_RESETM | USB_CNTR_L1REQM; + + /* Set interrupt mask */ + USBx->CNTR = winterruptmask; + + return HAL_OK; +} + +/** + * @brief USB_DisableGlobalInt + * Disable the controller's Global Int in the AHB Config reg + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DisableGlobalInt(USB_DRD_TypeDef *USBx) +{ + uint32_t winterruptmask; + + /* Set winterruptmask variable */ + winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM | + USB_CNTR_SUSPM | USB_CNTR_ERRM | + USB_CNTR_SOFM | USB_CNTR_ESOFM | + USB_CNTR_RESETM | USB_CNTR_L1REQM; + + /* Clear interrupt mask */ + USBx->CNTR &= ~winterruptmask; + + return HAL_OK; +} + +/** + * @brief USB_SetCurrentMode Set functional mode + * @param USBx Selected device + * @param mode current core mode + * This parameter can be one of the these values: + * @arg USB_DEVICE_MODE Peripheral mode + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetCurrentMode(USB_DRD_TypeDef *USBx, USB_DRD_ModeTypeDef mode) +{ + if (mode == USB_DEVICE_MODE) + { + USBx->CNTR &= ~USB_CNTR_HOST; + } + else if (mode == USB_HOST_MODE) + { + USBx->CNTR |= USB_CNTR_HOST; + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief USB_DevInit Initializes the USB controller registers + * for device mode + * @param USBx Selected device + * @param cfg pointer to a USB_DRD_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevInit(USB_DRD_TypeDef *USBx, USB_DRD_CfgTypeDef cfg) +{ + HAL_StatusTypeDef ret; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(cfg); + + /* Force Reset */ + USBx->CNTR = USB_CNTR_USBRST; + + /* Release Reset */ + USBx->CNTR &= ~USB_CNTR_USBRST; + + /* Set the Device Mode */ + ret = USB_SetCurrentMode(USBx, USB_DEVICE_MODE); + + /* Clear pending interrupts */ + USBx->ISTR = 0U; + + return ret; +} + +/** + * @brief USB_FlushTxFifo : Flush a Tx FIFO + * @param USBx : Selected device + * @param num : FIFO number + * This parameter can be a value from 1 to 15 + 15 means Flush all Tx FIFOs + * @retval HAL status + */ +HAL_StatusTypeDef USB_FlushTxFifo(USB_DRD_TypeDef const *USBx, uint32_t num) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + UNUSED(num); + + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + + return HAL_OK; +} + +/** + * @brief USB_FlushRxFifo : Flush Rx FIFO + * @param USBx : Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_FlushRxFifo(USB_DRD_TypeDef const *USBx) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(USBx); + + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + + return HAL_OK; +} + + +#if defined (HAL_PCD_MODULE_ENABLED) +/** + * @brief Activate and configure an endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateEndpoint(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint32_t wEpRegVal; + + wEpRegVal = PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_T_MASK; + + /* initialize Endpoint */ + switch (ep->type) + { + case EP_TYPE_CTRL: + wEpRegVal |= USB_EP_CONTROL; + break; + + case EP_TYPE_BULK: + wEpRegVal |= USB_EP_BULK; + break; + + case EP_TYPE_INTR: + wEpRegVal |= USB_EP_INTERRUPT; + break; + + case EP_TYPE_ISOC: + wEpRegVal |= USB_EP_ISOCHRONOUS; + break; + + default: + ret = HAL_ERROR; + break; + } + + PCD_SET_ENDPOINT(USBx, ep->num, (wEpRegVal | USB_EP_VTRX | USB_EP_VTTX)); + + PCD_SET_EP_ADDRESS(USBx, ep->num, ep->num); + + if (ep->doublebuffer == 0U) + { + if (ep->is_in != 0U) + { + /*Set the endpoint Transmit buffer address */ + PCD_SET_EP_TX_ADDRESS(USBx, ep->num, ep->pmaadress); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + if (ep->type != EP_TYPE_ISOC) + { + /* Configure NAK status for the Endpoint */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK); + } + else + { + /* Configure TX Endpoint to disabled state */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + } + else + { + /* Set the endpoint Receive buffer address */ + PCD_SET_EP_RX_ADDRESS(USBx, ep->num, ep->pmaadress); + + /* Set the endpoint Receive buffer counter */ + PCD_SET_EP_RX_CNT(USBx, ep->num, ep->maxpacket); + PCD_CLEAR_RX_DTOG(USBx, ep->num); + + if (ep->num == 0U) + { + /* Configure VALID status for EP0 */ + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + } + else + { + /* Configure NAK status for OUT Endpoint */ + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_NAK); + } + } + } +#if (USE_USB_DOUBLE_BUFFER == 1U) + /* Double Buffer */ + else + { + if (ep->type == EP_TYPE_BULK) + { + /* Set bulk endpoint as double buffered */ + PCD_SET_BULK_EP_DBUF(USBx, ep->num); + } + else + { + /* Set the ISOC endpoint in double buffer mode */ + PCD_CLEAR_EP_KIND(USBx, ep->num); + } + + /* Set buffer address for double buffered mode */ + PCD_SET_EP_DBUF_ADDR(USBx, ep->num, ep->pmaaddr0, ep->pmaaddr1); + + if (ep->is_in == 0U) + { + /* Clear the data toggle bits for the endpoint IN/OUT */ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + else + { + /* Clear the data toggle bits for the endpoint IN/OUT */ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + if (ep->type != EP_TYPE_ISOC) + { + /* Configure NAK status for the Endpoint */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK); + } + else + { + /* Configure TX Endpoint to disabled state */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + } + } +#endif /* (USE_USB_DOUBLE_BUFFER == 1U) */ + + return ret; +} + +/** + * @brief De-activate and de-initialize an endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeactivateEndpoint(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep) +{ + if (ep->doublebuffer == 0U) + { + if (ep->is_in != 0U) + { + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + /* Configure DISABLE status for the Endpoint */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + + else + { + PCD_CLEAR_RX_DTOG(USBx, ep->num); + + /* Configure DISABLE status for the Endpoint */ + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + } + } +#if (USE_USB_DOUBLE_BUFFER == 1U) + /* Double Buffer */ + else + { + if (ep->is_in == 0U) + { + /* Clear the data toggle bits for the endpoint IN/OUT*/ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + /* Reset value of the data toggle bits for the endpoint out*/ + PCD_TX_DTOG(USBx, ep->num); + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + else + { + /* Clear the data toggle bits for the endpoint IN/OUT*/ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + PCD_RX_DTOG(USBx, ep->num); + + /* Configure DISABLE status for the Endpoint*/ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + } + } +#endif /* (USE_USB_DOUBLE_BUFFER == 1U) */ + + return HAL_OK; +} + +/** + * @brief USB_EPStartXfer setup and starts a transfer over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPStartXfer(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep) +{ + uint32_t len; +#if (USE_USB_DOUBLE_BUFFER == 1U) + uint16_t pmabuffer; + uint16_t wEPVal; +#endif /* (USE_USB_DOUBLE_BUFFER == 1U) */ + + /* IN endpoint */ + if (ep->is_in == 1U) + { + /*Multi packet transfer*/ + if (ep->xfer_len > ep->maxpacket) + { + len = ep->maxpacket; + } + else + { + len = ep->xfer_len; + } + + /* configure and validate Tx endpoint */ + if (ep->doublebuffer == 0U) + { + USB_WritePMA(USBx, ep->xfer_buff, ep->pmaadress, (uint16_t)len); + PCD_SET_EP_TX_CNT(USBx, ep->num, len); + } +#if (USE_USB_DOUBLE_BUFFER == 1U) + else + { + /* double buffer bulk management */ + if (ep->type == EP_TYPE_BULK) + { + if (ep->xfer_len_db > ep->maxpacket) + { + /* enable double buffer */ + PCD_SET_BULK_EP_DBUF(USBx, ep->num); + + /* each Time to write in PMA xfer_len_db will */ + ep->xfer_len_db -= len; + + /* Fill the two first buffer in the Buffer0 & Buffer1 */ + if ((PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_DTOG_TX) != 0U) + { + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr1; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + ep->xfer_buff += len; + + if (ep->xfer_len_db > ep->maxpacket) + { + ep->xfer_len_db -= len; + } + else + { + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + } + + /* Set the Double buffer counter for pmabuffer0 */ + PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr0; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + } + else + { + /* Set the Double buffer counter for pmabuffer0 */ + PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr0; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + ep->xfer_buff += len; + + if (ep->xfer_len_db > ep->maxpacket) + { + ep->xfer_len_db -= len; + } + else + { + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + } + + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr1; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + } + } + /* auto Switch to single buffer mode when transfer xfer_len_db; + + /* disable double buffer mode for Bulk endpoint */ + PCD_CLEAR_BULK_EP_DBUF(USBx, ep->num); + + /* Set Tx count with nbre of byte to be transmitted */ + PCD_SET_EP_TX_CNT(USBx, ep->num, len); + pmabuffer = ep->pmaaddr0; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + } + } + else /* manage isochronous double buffer IN mode */ + { + /* each Time to write in PMA xfer_len_db will */ + ep->xfer_len_db -= len; + + /* Fill the data buffer */ + if ((PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_DTOG_TX) != 0U) + { + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr1; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + } + else + { + /* Set the Double buffer counter for pmabuffer0 */ + PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr0; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + } + } + } +#endif /* (USE_USB_DOUBLE_BUFFER == 1U) */ + + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_VALID); + } + else /* OUT endpoint */ + { + if (ep->doublebuffer == 0U) + { + /* Multi packet transfer */ + if (ep->xfer_len > ep->maxpacket) + { + len = ep->maxpacket; + ep->xfer_len -= len; + } + else + { + len = ep->xfer_len; + ep->xfer_len = 0U; + } + /* configure and validate Rx endpoint */ + PCD_SET_EP_RX_CNT(USBx, ep->num, len); + } +#if (USE_USB_DOUBLE_BUFFER == 1U) + else + { + /* First Transfer Coming From HAL_PCD_EP_Receive & From ISR */ + /* Set the Double buffer counter */ + if (ep->type == EP_TYPE_BULK) + { + PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, ep->maxpacket); + + /* Coming from ISR */ + if (ep->xfer_count != 0U) + { + /* update last value to check if there is blocking state */ + wEPVal = (uint16_t)PCD_GET_ENDPOINT(USBx, ep->num); + + /*Blocking State */ + if ((((wEPVal & USB_EP_DTOG_RX) != 0U) && ((wEPVal & USB_EP_DTOG_TX) != 0U)) || + (((wEPVal & USB_EP_DTOG_RX) == 0U) && ((wEPVal & USB_EP_DTOG_TX) == 0U))) + { + PCD_FREE_USER_BUFFER(USBx, ep->num, 0U); + } + } + } + /* iso out double */ + else if (ep->type == EP_TYPE_ISOC) + { + /* Multi packet transfer */ + if (ep->xfer_len > ep->maxpacket) + { + len = ep->maxpacket; + ep->xfer_len -= len; + } + else + { + len = ep->xfer_len; + ep->xfer_len = 0U; + } + PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, len); + } + else + { + return HAL_ERROR; + } + } +#endif /* (USE_USB_DOUBLE_BUFFER == 1U) */ + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + } + + return HAL_OK; +} + + +/** + * @brief USB_EPSetStall set a stall condition over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPSetStall(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep) +{ + if (ep->is_in != 0U) + { + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_STALL); + } + else + { + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_STALL); + } + + return HAL_OK; +} + +/** + * @brief USB_EPClearStall Clear a stall condition over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPClearStall(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep) +{ + if (ep->doublebuffer == 0U) + { + if (ep->is_in != 0U) + { + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + if (ep->type != EP_TYPE_ISOC) + { + /* Configure NAK status for the Endpoint */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK); + } + } + else + { + PCD_CLEAR_RX_DTOG(USBx, ep->num); + + /* Configure VALID status for the Endpoint */ + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + } + } + + return HAL_OK; +} + +/** + * @brief USB_EPStoptXfer Stop transfer on an EP + * @param USBx usb device instance + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPStopXfer(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep) +{ + /* IN endpoint */ + if (ep->is_in == 1U) + { + if (ep->doublebuffer == 0U) + { + if (ep->type != EP_TYPE_ISOC) + { + /* Configure NAK status for the Endpoint */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK); + } + else + { + /* Configure TX Endpoint to disabled state */ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + } + } + else /* OUT endpoint */ + { + if (ep->doublebuffer == 0U) + { + if (ep->type != EP_TYPE_ISOC) + { + /* Configure NAK status for the Endpoint */ + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_NAK); + } + else + { + /* Configure RX Endpoint to disabled state */ + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + } + } + } + + return HAL_OK; +} +#endif /* defined (HAL_PCD_MODULE_ENABLED) */ + +/** + * @brief USB_StopDevice Stop the usb device mode + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_StopDevice(USB_DRD_TypeDef *USBx) +{ + /* disable all interrupts and force USB reset */ + USBx->CNTR = USB_CNTR_USBRST; + + /* clear interrupt status register */ + USBx->ISTR = 0U; + + /* switch-off device */ + USBx->CNTR = (USB_CNTR_USBRST | USB_CNTR_PDWN); + + return HAL_OK; +} + +/** + * @brief USB_SetDevAddress Stop the usb device mode + * @param USBx Selected device + * @param address new device address to be assigned + * This parameter can be a value from 0 to 255 + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetDevAddress(USB_DRD_TypeDef *USBx, uint8_t address) +{ + if (address == 0U) + { + /* set device address and enable function */ + USBx->DADDR = USB_DADDR_EF; + } + + return HAL_OK; +} + +/** + * @brief USB_DevConnect Connect the USB device by enabling the pull-up/pull-down + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevConnect(USB_DRD_TypeDef *USBx) +{ + /* Enabling DP Pull-UP bit to Connect internal PU resistor on USB DP line */ + USBx->BCDR |= USB_BCDR_DPPU; + + return HAL_OK; +} + +/** + * @brief USB_DevDisconnect Disconnect the USB device by disabling the pull-up/pull-down + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevDisconnect(USB_DRD_TypeDef *USBx) +{ + /* Disable DP Pull-Up bit to disconnect the Internal PU resistor on USB DP line */ + USBx->BCDR &= ~(USB_BCDR_DPPU); + + return HAL_OK; +} + +/** + * @brief USB_ReadInterrupts return the global USB interrupt status + * @param USBx Selected device + * @retval USB Global Interrupt status + */ +uint32_t USB_ReadInterrupts(USB_DRD_TypeDef const *USBx) +{ + uint32_t tmpreg; + + tmpreg = USBx->ISTR; + return tmpreg; +} + +/** + * @brief USB_ActivateRemoteWakeup : active remote wakeup signalling + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_DRD_TypeDef *USBx) +{ + USBx->CNTR |= USB_CNTR_L2RES; + + return HAL_OK; +} + +/** + * @brief USB_DeActivateRemoteWakeup de-active remote wakeup signalling + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_DRD_TypeDef *USBx) +{ + USBx->CNTR &= ~USB_CNTR_L2RES; + + return HAL_OK; +} + +/** + * @brief Copy a buffer from user memory area to packet memory area (PMA) + * @param USBx USB peripheral instance register address. + * @param pbUsrBuf pointer to user memory area. + * @param wPMABufAddr address into PMA. + * @param wNBytes no. of bytes to be copied. + * @retval None + */ +void USB_WritePMA(USB_DRD_TypeDef const *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes) +{ + UNUSED(USBx); + uint32_t WrVal; + uint32_t count; + __IO uint32_t *pdwVal; + uint32_t NbWords = ((uint32_t)wNBytes + 3U) >> 2U; + /* Due to the PMA access 32bit only so the last non word data should be processed alone */ + uint16_t remaining_bytes = wNBytes % 4U; + uint8_t *pBuf = pbUsrBuf; + + /* Check if there is a remaining byte */ + if (remaining_bytes != 0U) + { + NbWords--; + } + + /* Get the PMA Buffer pointer */ + pdwVal = (__IO uint32_t *)(USB_DRD_PMAADDR + (uint32_t)wPMABufAddr); + + /* Write the Calculated Word into the PMA related Buffer */ + for (count = NbWords; count != 0U; count--) + { + *pdwVal = __UNALIGNED_UINT32_READ(pBuf); + pdwVal++; + /* Increment pBuf 4 Time as Word Increment */ + pBuf++; + pBuf++; + pBuf++; + pBuf++; + } + + /* When Number of data is not word aligned, write the remaining Byte */ + if (remaining_bytes != 0U) + { + WrVal = 0U; + + do + { + WrVal |= (uint32_t)(*(uint8_t *)pBuf) << (8U * count); + count++; + pBuf++; + remaining_bytes--; + } while (remaining_bytes != 0U); + + *pdwVal = WrVal; + } +} + +/** + * @brief Copy data from packet memory area (PMA) to user memory buffer + * @param USBx USB peripheral instance register address. + * @param pbUsrBuf pointer to user memory area. + * @param wPMABufAddr address into PMA. + * @param wNBytes no. of bytes to be copied. + * @retval None + */ +void USB_ReadPMA(USB_DRD_TypeDef const *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes) +{ + UNUSED(USBx); + uint32_t count; + uint32_t RdVal; + __IO uint32_t *pdwVal; + uint32_t NbWords = ((uint32_t)wNBytes + 3U) >> 2U; + /*Due to the PMA access 32bit only so the last non word data should be processed alone */ + uint16_t remaining_bytes = wNBytes % 4U; + uint8_t *pBuf = pbUsrBuf; + + /* Get the PMA Buffer pointer */ + pdwVal = (__IO uint32_t *)(USB_DRD_PMAADDR + (uint32_t)wPMABufAddr); + + /* if nbre of byte is not word aligned decrement the nbre of word*/ + if (remaining_bytes != 0U) + { + NbWords--; + } + + /*Read the Calculated Word From the PMA related Buffer*/ + for (count = NbWords; count != 0U; count--) + { + __UNALIGNED_UINT32_WRITE(pBuf, *pdwVal); + + pdwVal++; + pBuf++; + pBuf++; + pBuf++; + pBuf++; + } + + /*When Number of data is not word aligned, read the remaining byte*/ + if (remaining_bytes != 0U) + { + RdVal = *(__IO uint32_t *)pdwVal; + + do + { + *(uint8_t *)pBuf = (uint8_t)(RdVal >> (8U * (uint8_t)(count))); + count++; + pBuf++; + remaining_bytes--; + } while (remaining_bytes != 0U); + } +} + + +/*------------------------------------------------------------------------*/ +/* HOST API */ +/*------------------------------------------------------------------------*/ + +/** + * @brief USB_HostInit Initializes the USB DRD controller registers + * for Host mode + * @param USBx Selected device + * @param cfg pointer to a USB_DRD_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_HostInit(USB_DRD_TypeDef *USBx, USB_DRD_CfgTypeDef cfg) +{ + UNUSED(cfg); + + /* Clear All Pending Interrupt */ + USBx->ISTR = 0U; + + /* Disable all interrupts */ + USBx->CNTR &= ~(USB_CNTR_CTRM | USB_CNTR_PMAOVRM | USB_CNTR_ERRM | + USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_DCON | + USB_CNTR_SOFM | USB_CNTR_ESOFM | USB_CNTR_L1REQM); + + /* Clear All Pending Interrupt */ + USBx->ISTR = 0U; + + /* Enable Global interrupt */ + USBx->CNTR |= (USB_CNTR_CTRM | USB_CNTR_PMAOVRM | USB_CNTR_ERRM | + USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_DCON | + USB_CNTR_SOFM | USB_CNTR_ESOFM | USB_CNTR_L1REQM); + + /* Remove Reset */ + USBx->CNTR &= ~USB_CNTR_USBRST; + + return HAL_OK; +} + + +/** + * @brief USB_DRD_ResetPort : Reset Host Port + * @param USBx Selected device + * @retval HAL status + * @note (1)The application must wait at least 10 ms + * before clearing the reset bit. + */ +HAL_StatusTypeDef USB_ResetPort(USB_DRD_TypeDef *USBx) +{ + /* Force USB Reset */ + USBx->CNTR |= USB_CNTR_USBRST; + HAL_Delay(100); + /* Release USB Reset */ + USBx->CNTR &= ~USB_CNTR_USBRST; + HAL_Delay(30); + + return HAL_OK; +} + +/** + * @brief Return Host Core speed + * @param USBx Selected device + * @retval speed Host speed + * This parameter can be one of these values + * @arg USB_DRD_SPEED_FS Full speed mode + * @arg USB_DRD_SPEED_LS Low speed mode + */ +uint32_t USB_GetHostSpeed(USB_DRD_TypeDef const *USBx) +{ + if ((USBx->ISTR & USB_ISTR_LS_DCONN) != 0U) + { + return USB_DRD_SPEED_LS; + } + else + { + return USB_DRD_SPEED_FS; + } +} + +/** + * @brief Return Host Current Frame number + * @param USBx Selected device + * @retval current frame number + */ +uint32_t USB_GetCurrentFrame(USB_DRD_TypeDef const *USBx) +{ + return USBx->FNR & 0x7FFU; +} + +/** + * @brief Set the channel Kind (Single/double buffer mode) + * @param USBx Selected device + * @param phy_ch_num Selected device + * @param db_state double state can be USB_DRD_XXX_DBUFF_ENBALE/USB_DRD_XXX_DBUFF_DISABLE + * @retval HAL status + */ +HAL_StatusTypeDef USB_HC_DoubleBuffer(USB_DRD_TypeDef *USBx, + uint8_t phy_ch_num, uint8_t db_state) +{ + uint32_t tmp; + + if ((db_state == USB_DRD_BULK_DBUFF_ENBALE) || (db_state == USB_DRD_ISOC_DBUFF_DISABLE)) + { + tmp = (USB_DRD_GET_CHEP(USBx, phy_ch_num) | USB_CH_KIND) & USB_CHEP_DB_MSK; + } + else + { + tmp = USB_DRD_GET_CHEP(USBx, phy_ch_num) & (~USB_CH_KIND) & USB_CHEP_DB_MSK; + } + + /* Set the device speed in case using HUB FS with device LS */ + USB_DRD_SET_CHEP(USBx, phy_ch_num, tmp); + + return HAL_OK; +} + +/** + * @brief Initialize a host channel + * @param USBx Selected device + * @param phy_ch_num Channel number + * This parameter can be a value from 1 to 15 + * @param epnum Endpoint number + * This parameter can be a value from 1 to 15 + * @param dev_address Current device address + * This parameter can be a value from 0 to 255 + * @param speed Current device speed + * This parameter can be one of these values: + * @arg USB_DRD_SPEED_FULL Full speed mode + * @arg USB_DRD_SPEED_LOW Low speed mode + * @param ep_type Endpoint Type + * This parameter can be one of these values: + * @arg EP_TYPE_CTRL Control type + * @arg EP_TYPE_ISOC Isochronous type + * @arg EP_TYPE_BULK Bulk type + * @arg EP_TYPE_INTR Interrupt type + * @param mps Max Packet Size + * This parameter can be a value from 0 to 32K + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_Init(USB_DRD_TypeDef *USBx, uint8_t phy_ch_num, + uint8_t epnum, uint8_t dev_address, uint8_t speed, + uint8_t ep_type, uint16_t mps) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint32_t wChRegVal; + uint32_t HostCoreSpeed; + + UNUSED(mps); + + wChRegVal = USB_DRD_GET_CHEP(USBx, phy_ch_num) & USB_CH_T_MASK; + + /* initialize host Channel */ + switch (ep_type) + { + case EP_TYPE_CTRL: + wChRegVal |= USB_EP_CONTROL; + break; + + case EP_TYPE_BULK: + wChRegVal |= USB_EP_BULK; + break; + + case EP_TYPE_INTR: + wChRegVal |= USB_EP_INTERRUPT; + break; + + case EP_TYPE_ISOC: + wChRegVal |= USB_EP_ISOCHRONOUS; + break; + + default: + ret = HAL_ERROR; + break; + } + + wChRegVal &= ~USB_CHEP_DEVADDR; + wChRegVal |= (((uint32_t)dev_address << USB_CHEP_DEVADDR_Pos) | + ((uint32_t)epnum & 0x0FU)); + + /* Get Host core Speed */ + HostCoreSpeed = USB_GetHostSpeed(USBx); + + /* Set the device speed in case using HUB FS with device LS */ + if ((speed == USB_DRD_SPEED_LS) && (HostCoreSpeed == USB_DRD_SPEED_FS)) + { + wChRegVal |= USB_CHEP_LSEP; + } + + /* Set the dev_address & ep type */ + USB_DRD_SET_CHEP(USBx, phy_ch_num, (wChRegVal | USB_CH_VTRX | USB_CH_VTTX)); + + return ret; +} + +/** + * @brief Start a transfer over a host channel + * @param USBx Selected device + * @param hc pointer to host channel structure + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_StartXfer(USB_DRD_TypeDef *USBx, USB_DRD_HCTypeDef *hc) +{ + uint32_t len; + uint32_t phy_ch_num = (uint32_t)hc->phy_ch_num; +#if (USE_USB_DOUBLE_BUFFER == 1U) + uint32_t ch_reg = USB_DRD_GET_CHEP(USBx, phy_ch_num); +#endif /* USE_USB_DOUBLE_BUFFER */ + + if (hc->ch_dir == CH_IN_DIR) /* In Channel */ + { + /* Multi packet transfer */ + if (hc->xfer_len > hc->max_packet) + { + len = hc->max_packet; + } + else + { + len = hc->xfer_len; + } + + if (hc->doublebuffer == 0U) + { + /* Set RX buffer count */ + USB_DRD_SET_CHEP_RX_CNT(USBx, phy_ch_num, len); + } +#if (USE_USB_DOUBLE_BUFFER == 1U) + else if (hc->ep_type == EP_TYPE_BULK) + { + /* Double buffer activated */ + if ((hc->xfer_len > hc->max_packet)) + { + (void)USB_HC_DoubleBuffer(USBx, (uint8_t)phy_ch_num, USB_DRD_BULK_DBUFF_ENBALE); + + /*Set the Double buffer counter*/ + USB_DRD_SET_CHEP_DBUF0_CNT(USBx, phy_ch_num, 0U, len); + USB_DRD_SET_CHEP_DBUF1_CNT(USBx, phy_ch_num, 0U, len); + } + else /* switch to single buffer mode */ + { + (void)USB_HC_DoubleBuffer(USBx, (uint8_t)phy_ch_num, USB_DRD_BULK_DBUFF_DISABLE); + + /* Set RX buffer count */ + USB_DRD_SET_CHEP_RX_CNT(USBx, phy_ch_num, len); + } + } + else /* isochronous */ + { + /* Set the Double buffer counter */ + USB_DRD_SET_CHEP_DBUF0_CNT(USBx, phy_ch_num, 0U, len); + USB_DRD_SET_CHEP_DBUF1_CNT(USBx, phy_ch_num, 0U, len); + } +#endif /* USE_USB_DOUBLE_BUFFER */ + + /*Enable host channel */ + USB_DRD_SET_CHEP_RX_STATUS(USBx, phy_ch_num, USB_CHEP_RX_STRX); + } + else /* Out Channel */ + { + /* Multi packet transfer*/ + if (hc->xfer_len > hc->max_packet) + { + len = hc->max_packet; + } + else + { + len = hc->xfer_len; + } + + /* configure and validate Tx endpoint */ + if (hc->doublebuffer == 0U) + { + USB_WritePMA(USBx, hc->xfer_buff, hc->pmaadress, (uint16_t)len); + USB_DRD_SET_CHEP_TX_CNT(USBx, phy_ch_num, (uint16_t)len); + + /*SET PID SETUP */ + if ((hc->data_pid) == HC_PID_SETUP) + { + USB_DRD_CHEP_TX_SETUP(USBx, phy_ch_num); + } + } +#if (USE_USB_DOUBLE_BUFFER == 1U) + else if (hc->ep_type == EP_TYPE_BULK) + { + (void)USB_HC_BULK_DB_StartXfer(USBx, hc, ch_reg, &len); + } + else + { + (void)USB_HC_ISO_DB_StartXfer(USBx, hc, len); + } +#endif /* (USE_USB_DOUBLE_BUFFER == 1U) */ + + /* Enable host channel */ + USB_DRD_SET_CHEP_TX_STATUS(USBx, hc->phy_ch_num, USB_CH_TX_VALID); + } + + return HAL_OK; +} + +#if (USE_USB_DOUBLE_BUFFER == 1U) +/** + * @brief Start Transfer of Channel isochronous out double buffer + * @param USBx Selected device + * @param hc_num Host Channel number + * This parameter can be a value from 1 to 15 + * @param len Transfer Length + * @retval HAL state + */ +static HAL_StatusTypeDef USB_HC_ISO_DB_StartXfer(USB_DRD_TypeDef *USBx, + USB_DRD_HCTypeDef *hc, + uint32_t len) +{ + uint32_t phy_ch_num = (uint32_t)hc->phy_ch_num; + + /* check the DTOG_TX to determine in which buffer we should write */ + if ((USB_DRD_GET_CHEP(USBx, phy_ch_num) & USB_CH_DTOG_TX) != 0U) + { + USB_DRD_SET_CHEP_DBUF0_CNT(USBx, phy_ch_num, 1U, len); + USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr0, (uint16_t)len); + } + else + { + /* DTOGTX=0 */ + /* Set the Double buffer counter for pmabuffer0 */ + USB_DRD_SET_CHEP_DBUF1_CNT(USBx, phy_ch_num, 1U, len); + USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr1, (uint16_t)len); + } + + return HAL_OK; +} + +/** + * @brief Start Transfer of Channel bulk out double buffer + * @param USBx Selected device + * @param hc_num Host Channel number + * This parameter can be a value from 1 to 15 + * @param ch_reg snapshot of the CHEPR register + * @param len Transfer Length + * @retval HAL state + */ +static HAL_StatusTypeDef USB_HC_BULK_DB_StartXfer(USB_DRD_TypeDef *USBx, + USB_DRD_HCTypeDef *hc, + uint32_t ch_reg, + uint32_t *len) +{ + uint32_t phy_ch_num = (uint32_t)hc->phy_ch_num; + + /* -Double Buffer Mangement- */ + if (hc->xfer_len_db > hc->max_packet) + { + /* enable double buffer mode */ + (void)USB_HC_DoubleBuffer(USBx, (uint8_t)phy_ch_num, USB_DRD_BULK_DBUFF_ENBALE); + *len = hc->max_packet; + hc->xfer_len_db -= *len; + + /* Prepare two buffer before enabling host */ + if ((ch_reg & USB_CH_DTOG_TX) == 0U) + { + /* Write Buffer0 */ + USB_DRD_SET_CHEP_DBUF0_CNT(USBx, phy_ch_num, 1U, (uint16_t)*len); + USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr0, (uint16_t)*len); + } + else + { + /* Write Buffer1 */ + USB_DRD_SET_CHEP_DBUF1_CNT(USBx, phy_ch_num, 1U, (uint16_t)*len); + USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr1, (uint16_t)*len); + } + + hc->xfer_buff += *len; + + /* Multi packet transfer */ + if (hc->xfer_len_db > hc->max_packet) + { + hc->xfer_len_db -= *len; + } + else + { + *len = hc->xfer_len_db; + hc->xfer_len_db = 0U; + } + + if ((ch_reg & USB_CH_DTOG_TX) == 0U) + { + /* Write Buffer1 */ + USB_DRD_SET_CHEP_DBUF1_CNT(USBx, phy_ch_num, 1U, (uint16_t)*len); + USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr1, (uint16_t)*len); + } + else + { + /* Write Buffer0 */ + USB_DRD_SET_CHEP_DBUF0_CNT(USBx, phy_ch_num, 1U, (uint16_t)*len); + USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr0, (uint16_t)*len); + } + } + else + { + /* Disable bulk double buffer mode */ + (void)USB_HC_DoubleBuffer(USBx, (uint8_t)phy_ch_num, USB_DRD_BULK_DBUFF_DISABLE); + USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr0, (uint16_t)*len); + USB_DRD_SET_CHEP_TX_CNT(USBx, phy_ch_num, (uint16_t)*len); + } + + return HAL_OK; +} +#endif /* (USE_USB_DOUBLE_BUFFER == 1U) */ + + +/** + * @brief Halt a host channel in + * @param USBx Selected device + * @param hc_num Host Channel number + * This parameter can be a value from 1 to 15 + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_IN_Halt(USB_DRD_TypeDef *USBx, uint8_t phy_ch) +{ + /* Set disable to Channel */ + USB_DRD_SET_CHEP_RX_STATUS(USBx, phy_ch, USB_CH_RX_DIS); + + return HAL_OK; +} + + +/** + * @brief Halt a host channel out + * @param USBx Selected device + * @param hc_num Host Channel number + * This parameter can be a value from 1 to 15 + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_OUT_Halt(USB_DRD_TypeDef *USBx, uint8_t phy_ch) +{ + /* Set disable to Channel */ + USB_DRD_SET_CHEP_TX_STATUS(USBx, phy_ch, USB_CH_TX_DIS); + + return HAL_OK; +} + +/** + * @brief Stop Host Core + * @param USBx Selected device + * @retval HAL state + */ +HAL_StatusTypeDef USB_StopHost(USB_DRD_TypeDef *USBx) +{ + USBx->ISTR &= ~(USB_ISTR_DIR | USB_ISTR_L1REQ | + USB_ISTR_ESOF | USB_ISTR_SOF | + USB_ISTR_RESET | USB_ISTR_DCON | + USB_ISTR_SUSP | USB_ISTR_WKUP | + USB_ISTR_ERR | USB_ISTR_PMAOVR | + USB_ISTR_CTR); + + /* Set PowerDown */ + USBx->CNTR |= USB_CNTR_PDWN; + + /* Force a Reset */ + USBx->CNTR |= USB_CNTR_USBRST; + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_DRD_FS) */ +#endif /* defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) */ + +/** + * @} + */ diff --git a/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h b/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h new file mode 100644 index 0000000..aeac6bf --- /dev/null +++ b/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h @@ -0,0 +1,184 @@ +/** + ****************************************************************************** + * @file usbd_cdc.h + * @author MCD Application Team + * @brief header file for the usbd_cdc.c file. + ****************************************************************************** + * @attention + * + * Copyright (c) 2015 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_CDC_H +#define __USB_CDC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_ioreq.h" + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup usbd_cdc + * @brief This file is the Header file for usbd_cdc.c + * @{ + */ + + +/** @defgroup usbd_cdc_Exported_Defines + * @{ + */ +#ifndef CDC_IN_EP +#define CDC_IN_EP 0x81U /* EP1 for data IN */ +#endif /* CDC_IN_EP */ +#ifndef CDC_OUT_EP +#define CDC_OUT_EP 0x01U /* EP1 for data OUT */ +#endif /* CDC_OUT_EP */ +#ifndef CDC_CMD_EP +#define CDC_CMD_EP 0x82U /* EP2 for CDC commands */ +#endif /* CDC_CMD_EP */ + +#ifndef CDC_HS_BINTERVAL +#define CDC_HS_BINTERVAL 0x10U +#endif /* CDC_HS_BINTERVAL */ + +#ifndef CDC_FS_BINTERVAL +#define CDC_FS_BINTERVAL 0x10U +#endif /* CDC_FS_BINTERVAL */ + +/* CDC Endpoints parameters: you can fine tune these values depending on the needed baudrates and performance. */ +#define CDC_DATA_HS_MAX_PACKET_SIZE 512U /* Endpoint IN & OUT Packet size */ +#define CDC_DATA_FS_MAX_PACKET_SIZE 64U /* Endpoint IN & OUT Packet size */ +#define CDC_CMD_PACKET_SIZE 8U /* Control Endpoint Packet size */ + +#define USB_CDC_CONFIG_DESC_SIZ 67U +#define CDC_DATA_HS_IN_PACKET_SIZE CDC_DATA_HS_MAX_PACKET_SIZE +#define CDC_DATA_HS_OUT_PACKET_SIZE CDC_DATA_HS_MAX_PACKET_SIZE + +#define CDC_DATA_FS_IN_PACKET_SIZE CDC_DATA_FS_MAX_PACKET_SIZE +#define CDC_DATA_FS_OUT_PACKET_SIZE CDC_DATA_FS_MAX_PACKET_SIZE + +#define CDC_REQ_MAX_DATA_SIZE 0x7U +/*---------------------------------------------------------------------*/ +/* CDC definitions */ +/*---------------------------------------------------------------------*/ +#define CDC_SEND_ENCAPSULATED_COMMAND 0x00U +#define CDC_GET_ENCAPSULATED_RESPONSE 0x01U +#define CDC_SET_COMM_FEATURE 0x02U +#define CDC_GET_COMM_FEATURE 0x03U +#define CDC_CLEAR_COMM_FEATURE 0x04U +#define CDC_SET_LINE_CODING 0x20U +#define CDC_GET_LINE_CODING 0x21U +#define CDC_SET_CONTROL_LINE_STATE 0x22U +#define CDC_SEND_BREAK 0x23U + +/** + * @} + */ + + +/** @defgroup USBD_CORE_Exported_TypesDefinitions + * @{ + */ + +/** + * @} + */ +typedef struct +{ + uint32_t bitrate; + uint8_t format; + uint8_t paritytype; + uint8_t datatype; +} USBD_CDC_LineCodingTypeDef; + +typedef struct _USBD_CDC_Itf +{ + int8_t (* Init)(void); + int8_t (* DeInit)(void); + int8_t (* Control)(uint8_t cmd, uint8_t *pbuf, uint16_t length); + int8_t (* Receive)(uint8_t *Buf, uint32_t *Len); + int8_t (* TransmitCplt)(uint8_t *Buf, uint32_t *Len, uint8_t epnum); +} USBD_CDC_ItfTypeDef; + + +typedef struct +{ + uint32_t data[CDC_DATA_HS_MAX_PACKET_SIZE / 4U]; /* Force 32-bit alignment */ + uint8_t CmdOpCode; + uint8_t CmdLength; + uint8_t *RxBuffer; + uint8_t *TxBuffer; + uint32_t RxLength; + uint32_t TxLength; + + __IO uint32_t TxState; + __IO uint32_t RxState; +} USBD_CDC_HandleTypeDef; + + + +/** @defgroup USBD_CORE_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_CORE_Exported_Variables + * @{ + */ + +extern USBD_ClassTypeDef USBD_CDC; +#define USBD_CDC_CLASS &USBD_CDC +/** + * @} + */ + +/** @defgroup USB_CORE_Exported_Functions + * @{ + */ +uint8_t USBD_CDC_RegisterInterface(USBD_HandleTypeDef *pdev, + USBD_CDC_ItfTypeDef *fops); + +#ifdef USE_USBD_COMPOSITE +uint8_t USBD_CDC_SetTxBuffer(USBD_HandleTypeDef *pdev, uint8_t *pbuff, + uint32_t length, uint8_t ClassId); +uint8_t USBD_CDC_TransmitPacket(USBD_HandleTypeDef *pdev, uint8_t ClassId); +#else +uint8_t USBD_CDC_SetTxBuffer(USBD_HandleTypeDef *pdev, uint8_t *pbuff, + uint32_t length); +uint8_t USBD_CDC_TransmitPacket(USBD_HandleTypeDef *pdev); +#endif /* USE_USBD_COMPOSITE */ +uint8_t USBD_CDC_SetRxBuffer(USBD_HandleTypeDef *pdev, uint8_t *pbuff); +uint8_t USBD_CDC_ReceivePacket(USBD_HandleTypeDef *pdev); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USB_CDC_H */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c b/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c new file mode 100644 index 0000000..4b60a2c --- /dev/null +++ b/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c @@ -0,0 +1,894 @@ +/** + ****************************************************************************** + * @file usbd_cdc.c + * @author MCD Application Team + * @brief This file provides the high layer firmware functions to manage the + * following functionalities of the USB CDC Class: + * - Initialization and Configuration of high and low layer + * - Enumeration as CDC Device (and enumeration for each implemented memory interface) + * - OUT/IN data transfer + * - Command IN transfer (class requests management) + * - Error management + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2015 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + * @verbatim + * + * =================================================================== + * CDC Class Driver Description + * =================================================================== + * This driver manages the "Universal Serial Bus Class Definitions for Communications Devices + * Revision 1.2 November 16, 2007" and the sub-protocol specification of "Universal Serial Bus + * Communications Class Subclass Specification for PSTN Devices Revision 1.2 February 9, 2007" + * This driver implements the following aspects of the specification: + * - Device descriptor management + * - Configuration descriptor management + * - Enumeration as CDC device with 2 data endpoints (IN and OUT) and 1 command endpoint (IN) + * - Requests management (as described in section 6.2 in specification) + * - Abstract Control Model compliant + * - Union Functional collection (using 1 IN endpoint for control) + * - Data interface class + * + * These aspects may be enriched or modified for a specific user application. + * + * This driver doesn't implement the following aspects of the specification + * (but it is possible to manage these features with some modifications on this driver): + * - Any class-specific aspect relative to communication classes should be managed by user application. + * - All communication classes other than PSTN are not managed + * + * @endverbatim + * + ****************************************************************************** + */ + +/* BSPDependencies +- "stm32xxxxx_{eval}{discovery}{nucleo_144}.c" +- "stm32xxxxx_{eval}{discovery}_io.c" +EndBSPDependencies */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_cdc.h" +#include "usbd_ctlreq.h" + + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + + +/** @defgroup USBD_CDC + * @brief usbd core module + * @{ + */ + +/** @defgroup USBD_CDC_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_CDC_Private_Defines + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_CDC_Private_Macros + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_CDC_Private_FunctionPrototypes + * @{ + */ + +static uint8_t USBD_CDC_Init(USBD_HandleTypeDef *pdev, uint8_t cfgidx); +static uint8_t USBD_CDC_DeInit(USBD_HandleTypeDef *pdev, uint8_t cfgidx); +static uint8_t USBD_CDC_Setup(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); +static uint8_t USBD_CDC_DataIn(USBD_HandleTypeDef *pdev, uint8_t epnum); +static uint8_t USBD_CDC_DataOut(USBD_HandleTypeDef *pdev, uint8_t epnum); +static uint8_t USBD_CDC_EP0_RxReady(USBD_HandleTypeDef *pdev); +#ifndef USE_USBD_COMPOSITE +static uint8_t *USBD_CDC_GetFSCfgDesc(uint16_t *length); +static uint8_t *USBD_CDC_GetHSCfgDesc(uint16_t *length); +static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc(uint16_t *length); +static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc(uint16_t *length); +uint8_t *USBD_CDC_GetDeviceQualifierDescriptor(uint16_t *length); +#endif /* USE_USBD_COMPOSITE */ + +#ifndef USE_USBD_COMPOSITE +/* USB Standard Device Descriptor */ +__ALIGN_BEGIN static uint8_t USBD_CDC_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END = +{ + USB_LEN_DEV_QUALIFIER_DESC, + USB_DESC_TYPE_DEVICE_QUALIFIER, + 0x00, + 0x02, + 0x00, + 0x00, + 0x00, + 0x40, + 0x01, + 0x00, +}; +#endif /* USE_USBD_COMPOSITE */ +/** + * @} + */ + +/** @defgroup USBD_CDC_Private_Variables + * @{ + */ + + +/* CDC interface class callbacks structure */ +USBD_ClassTypeDef USBD_CDC = +{ + USBD_CDC_Init, + USBD_CDC_DeInit, + USBD_CDC_Setup, + NULL, /* EP0_TxSent */ + USBD_CDC_EP0_RxReady, + USBD_CDC_DataIn, + USBD_CDC_DataOut, + NULL, + NULL, + NULL, +#ifdef USE_USBD_COMPOSITE + NULL, + NULL, + NULL, + NULL, +#else + USBD_CDC_GetHSCfgDesc, + USBD_CDC_GetFSCfgDesc, + USBD_CDC_GetOtherSpeedCfgDesc, + USBD_CDC_GetDeviceQualifierDescriptor, +#endif /* USE_USBD_COMPOSITE */ +}; + +#ifndef USE_USBD_COMPOSITE +/* USB CDC device Configuration Descriptor */ +__ALIGN_BEGIN static uint8_t USBD_CDC_CfgDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END = +{ + /* Configuration Descriptor */ + 0x09, /* bLength: Configuration Descriptor size */ + USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */ + USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength */ + 0x00, + 0x02, /* bNumInterfaces: 2 interfaces */ + 0x01, /* bConfigurationValue: Configuration value */ + 0x00, /* iConfiguration: Index of string descriptor + describing the configuration */ +#if (USBD_SELF_POWERED == 1U) + 0xC0, /* bmAttributes: Bus Powered according to user configuration */ +#else + 0x80, /* bmAttributes: Bus Powered according to user configuration */ +#endif /* USBD_SELF_POWERED */ + USBD_MAX_POWER, /* MaxPower (mA) */ + + /*---------------------------------------------------------------------------*/ + + /* Interface Descriptor */ + 0x09, /* bLength: Interface Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */ + /* Interface descriptor type */ + 0x00, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x01, /* bNumEndpoints: One endpoint used */ + 0x02, /* bInterfaceClass: Communication Interface Class */ + 0x02, /* bInterfaceSubClass: Abstract Control Model */ + 0x01, /* bInterfaceProtocol: Common AT commands */ + 0x00, /* iInterface */ + + /* Header Functional Descriptor */ + 0x05, /* bLength: Endpoint Descriptor size */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x00, /* bDescriptorSubtype: Header Func Desc */ + 0x10, /* bcdCDC: spec release number */ + 0x01, + + /* Call Management Functional Descriptor */ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x01, /* bDescriptorSubtype: Call Management Func Desc */ + 0x00, /* bmCapabilities: D0+D1 */ + 0x01, /* bDataInterface */ + + /* ACM Functional Descriptor */ + 0x04, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x02, /* bDescriptorSubtype: Abstract Control Management desc */ + 0x02, /* bmCapabilities */ + + /* Union Functional Descriptor */ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x06, /* bDescriptorSubtype: Union func desc */ + 0x00, /* bMasterInterface: Communication class interface */ + 0x01, /* bSlaveInterface0: Data Class Interface */ + + /* Endpoint 2 Descriptor */ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_CMD_EP, /* bEndpointAddress */ + 0x03, /* bmAttributes: Interrupt */ + LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize */ + HIBYTE(CDC_CMD_PACKET_SIZE), + CDC_FS_BINTERVAL, /* bInterval */ + /*---------------------------------------------------------------------------*/ + + /* Data class interface descriptor */ + 0x09, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */ + 0x01, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x02, /* bNumEndpoints: Two endpoints used */ + 0x0A, /* bInterfaceClass: CDC */ + 0x00, /* bInterfaceSubClass */ + 0x00, /* bInterfaceProtocol */ + 0x00, /* iInterface */ + + /* Endpoint OUT Descriptor */ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_OUT_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize */ + HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), + 0x00, /* bInterval */ + + /* Endpoint IN Descriptor */ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_IN_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize */ + HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), + 0x00 /* bInterval */ +}; +#endif /* USE_USBD_COMPOSITE */ + +static uint8_t CDCInEpAdd = CDC_IN_EP; +static uint8_t CDCOutEpAdd = CDC_OUT_EP; +static uint8_t CDCCmdEpAdd = CDC_CMD_EP; + +/** + * @} + */ + +/** @defgroup USBD_CDC_Private_Functions + * @{ + */ + +/** + * @brief USBD_CDC_Init + * Initialize the CDC interface + * @param pdev: device instance + * @param cfgidx: Configuration index + * @retval status + */ +static uint8_t USBD_CDC_Init(USBD_HandleTypeDef *pdev, uint8_t cfgidx) +{ + UNUSED(cfgidx); + USBD_CDC_HandleTypeDef *hcdc; + + hcdc = (USBD_CDC_HandleTypeDef *)USBD_malloc(sizeof(USBD_CDC_HandleTypeDef)); + + if (hcdc == NULL) + { + pdev->pClassDataCmsit[pdev->classId] = NULL; + return (uint8_t)USBD_EMEM; + } + + (void)USBD_memset(hcdc, 0, sizeof(USBD_CDC_HandleTypeDef)); + + pdev->pClassDataCmsit[pdev->classId] = (void *)hcdc; + pdev->pClassData = pdev->pClassDataCmsit[pdev->classId]; + +#ifdef USE_USBD_COMPOSITE + /* Get the Endpoints addresses allocated for this class instance */ + CDCInEpAdd = USBD_CoreGetEPAdd(pdev, USBD_EP_IN, USBD_EP_TYPE_BULK, (uint8_t)pdev->classId); + CDCOutEpAdd = USBD_CoreGetEPAdd(pdev, USBD_EP_OUT, USBD_EP_TYPE_BULK, (uint8_t)pdev->classId); + CDCCmdEpAdd = USBD_CoreGetEPAdd(pdev, USBD_EP_IN, USBD_EP_TYPE_INTR, (uint8_t)pdev->classId); +#endif /* USE_USBD_COMPOSITE */ + + if (pdev->dev_speed == USBD_SPEED_HIGH) + { + /* Open EP IN */ + (void)USBD_LL_OpenEP(pdev, CDCInEpAdd, USBD_EP_TYPE_BULK, + CDC_DATA_HS_IN_PACKET_SIZE); + + pdev->ep_in[CDCInEpAdd & 0xFU].is_used = 1U; + + /* Open EP OUT */ + (void)USBD_LL_OpenEP(pdev, CDCOutEpAdd, USBD_EP_TYPE_BULK, + CDC_DATA_HS_OUT_PACKET_SIZE); + + pdev->ep_out[CDCOutEpAdd & 0xFU].is_used = 1U; + + /* Set bInterval for CDC CMD Endpoint */ + pdev->ep_in[CDCCmdEpAdd & 0xFU].bInterval = CDC_HS_BINTERVAL; + } + else + { + /* Open EP IN */ + (void)USBD_LL_OpenEP(pdev, CDCInEpAdd, USBD_EP_TYPE_BULK, + CDC_DATA_FS_IN_PACKET_SIZE); + + pdev->ep_in[CDCInEpAdd & 0xFU].is_used = 1U; + + /* Open EP OUT */ + (void)USBD_LL_OpenEP(pdev, CDCOutEpAdd, USBD_EP_TYPE_BULK, + CDC_DATA_FS_OUT_PACKET_SIZE); + + pdev->ep_out[CDCOutEpAdd & 0xFU].is_used = 1U; + + /* Set bInterval for CMD Endpoint */ + pdev->ep_in[CDCCmdEpAdd & 0xFU].bInterval = CDC_FS_BINTERVAL; + } + + /* Open Command IN EP */ + (void)USBD_LL_OpenEP(pdev, CDCCmdEpAdd, USBD_EP_TYPE_INTR, CDC_CMD_PACKET_SIZE); + pdev->ep_in[CDCCmdEpAdd & 0xFU].is_used = 1U; + + hcdc->RxBuffer = NULL; + + /* Init physical Interface components */ + ((USBD_CDC_ItfTypeDef *)pdev->pUserData[pdev->classId])->Init(); + + /* Init Xfer states */ + hcdc->TxState = 0U; + hcdc->RxState = 0U; + + if (hcdc->RxBuffer == NULL) + { + return (uint8_t)USBD_EMEM; + } + + if (pdev->dev_speed == USBD_SPEED_HIGH) + { + /* Prepare Out endpoint to receive next packet */ + (void)USBD_LL_PrepareReceive(pdev, CDCOutEpAdd, hcdc->RxBuffer, + CDC_DATA_HS_OUT_PACKET_SIZE); + } + else + { + /* Prepare Out endpoint to receive next packet */ + (void)USBD_LL_PrepareReceive(pdev, CDCOutEpAdd, hcdc->RxBuffer, + CDC_DATA_FS_OUT_PACKET_SIZE); + } + + return (uint8_t)USBD_OK; +} + +/** + * @brief USBD_CDC_Init + * DeInitialize the CDC layer + * @param pdev: device instance + * @param cfgidx: Configuration index + * @retval status + */ +static uint8_t USBD_CDC_DeInit(USBD_HandleTypeDef *pdev, uint8_t cfgidx) +{ + UNUSED(cfgidx); + + +#ifdef USE_USBD_COMPOSITE + /* Get the Endpoints addresses allocated for this CDC class instance */ + CDCInEpAdd = USBD_CoreGetEPAdd(pdev, USBD_EP_IN, USBD_EP_TYPE_BULK, (uint8_t)pdev->classId); + CDCOutEpAdd = USBD_CoreGetEPAdd(pdev, USBD_EP_OUT, USBD_EP_TYPE_BULK, (uint8_t)pdev->classId); + CDCCmdEpAdd = USBD_CoreGetEPAdd(pdev, USBD_EP_IN, USBD_EP_TYPE_INTR, (uint8_t)pdev->classId); +#endif /* USE_USBD_COMPOSITE */ + + /* Close EP IN */ + (void)USBD_LL_CloseEP(pdev, CDCInEpAdd); + pdev->ep_in[CDCInEpAdd & 0xFU].is_used = 0U; + + /* Close EP OUT */ + (void)USBD_LL_CloseEP(pdev, CDCOutEpAdd); + pdev->ep_out[CDCOutEpAdd & 0xFU].is_used = 0U; + + /* Close Command IN EP */ + (void)USBD_LL_CloseEP(pdev, CDCCmdEpAdd); + pdev->ep_in[CDCCmdEpAdd & 0xFU].is_used = 0U; + pdev->ep_in[CDCCmdEpAdd & 0xFU].bInterval = 0U; + + /* DeInit physical Interface components */ + if (pdev->pClassDataCmsit[pdev->classId] != NULL) + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData[pdev->classId])->DeInit(); + (void)USBD_free(pdev->pClassDataCmsit[pdev->classId]); + pdev->pClassDataCmsit[pdev->classId] = NULL; + pdev->pClassData = NULL; + } + + return (uint8_t)USBD_OK; +} + +/** + * @brief USBD_CDC_Setup + * Handle the CDC specific requests + * @param pdev: instance + * @param req: usb requests + * @retval status + */ +static uint8_t USBD_CDC_Setup(USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *)pdev->pClassDataCmsit[pdev->classId]; + uint16_t len; + uint8_t ifalt = 0U; + uint16_t status_info = 0U; + USBD_StatusTypeDef ret = USBD_OK; + + if (hcdc == NULL) + { + return (uint8_t)USBD_FAIL; + } + + switch (req->bmRequest & USB_REQ_TYPE_MASK) + { + case USB_REQ_TYPE_CLASS: + if (req->wLength != 0U) + { + if ((req->bmRequest & 0x80U) != 0U) + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData[pdev->classId])->Control(req->bRequest, + (uint8_t *)hcdc->data, + req->wLength); + + len = MIN(CDC_REQ_MAX_DATA_SIZE, req->wLength); + (void)USBD_CtlSendData(pdev, (uint8_t *)hcdc->data, len); + } + else + { + hcdc->CmdOpCode = req->bRequest; + hcdc->CmdLength = (uint8_t)MIN(req->wLength, USB_MAX_EP0_SIZE); + + (void)USBD_CtlPrepareRx(pdev, (uint8_t *)hcdc->data, hcdc->CmdLength); + } + } + else + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData[pdev->classId])->Control(req->bRequest, + (uint8_t *)req, 0U); + } + break; + + case USB_REQ_TYPE_STANDARD: + switch (req->bRequest) + { + case USB_REQ_GET_STATUS: + if (pdev->dev_state == USBD_STATE_CONFIGURED) + { + (void)USBD_CtlSendData(pdev, (uint8_t *)&status_info, 2U); + } + else + { + USBD_CtlError(pdev, req); + ret = USBD_FAIL; + } + break; + + case USB_REQ_GET_INTERFACE: + if (pdev->dev_state == USBD_STATE_CONFIGURED) + { + (void)USBD_CtlSendData(pdev, &ifalt, 1U); + } + else + { + USBD_CtlError(pdev, req); + ret = USBD_FAIL; + } + break; + + case USB_REQ_SET_INTERFACE: + if (pdev->dev_state != USBD_STATE_CONFIGURED) + { + USBD_CtlError(pdev, req); + ret = USBD_FAIL; + } + break; + + case USB_REQ_CLEAR_FEATURE: + break; + + default: + USBD_CtlError(pdev, req); + ret = USBD_FAIL; + break; + } + break; + + default: + USBD_CtlError(pdev, req); + ret = USBD_FAIL; + break; + } + + return (uint8_t)ret; +} + +/** + * @brief USBD_CDC_DataIn + * Data sent on non-control IN endpoint + * @param pdev: device instance + * @param epnum: endpoint number + * @retval status + */ +static uint8_t USBD_CDC_DataIn(USBD_HandleTypeDef *pdev, uint8_t epnum) +{ + USBD_CDC_HandleTypeDef *hcdc; + PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef *)pdev->pData; + + if (pdev->pClassDataCmsit[pdev->classId] == NULL) + { + return (uint8_t)USBD_FAIL; + } + + hcdc = (USBD_CDC_HandleTypeDef *)pdev->pClassDataCmsit[pdev->classId]; + + if ((pdev->ep_in[epnum & 0xFU].total_length > 0U) && + ((pdev->ep_in[epnum & 0xFU].total_length % hpcd->IN_ep[epnum & 0xFU].maxpacket) == 0U)) + { + /* Update the packet total length */ + pdev->ep_in[epnum & 0xFU].total_length = 0U; + + /* Send ZLP */ + (void)USBD_LL_Transmit(pdev, epnum, NULL, 0U); + } + else + { + hcdc->TxState = 0U; + + if (((USBD_CDC_ItfTypeDef *)pdev->pUserData[pdev->classId])->TransmitCplt != NULL) + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData[pdev->classId])->TransmitCplt(hcdc->TxBuffer, &hcdc->TxLength, epnum); + } + } + + return (uint8_t)USBD_OK; +} + +/** + * @brief USBD_CDC_DataOut + * Data received on non-control Out endpoint + * @param pdev: device instance + * @param epnum: endpoint number + * @retval status + */ +static uint8_t USBD_CDC_DataOut(USBD_HandleTypeDef *pdev, uint8_t epnum) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *)pdev->pClassDataCmsit[pdev->classId]; + + if (pdev->pClassDataCmsit[pdev->classId] == NULL) + { + return (uint8_t)USBD_FAIL; + } + + /* Get the received data length */ + hcdc->RxLength = USBD_LL_GetRxDataSize(pdev, epnum); + + /* USB data will be immediately processed, this allow next USB traffic being + NAKed till the end of the application Xfer */ + + ((USBD_CDC_ItfTypeDef *)pdev->pUserData[pdev->classId])->Receive(hcdc->RxBuffer, &hcdc->RxLength); + + return (uint8_t)USBD_OK; +} + +/** + * @brief USBD_CDC_EP0_RxReady + * Handle EP0 Rx Ready event + * @param pdev: device instance + * @retval status + */ +static uint8_t USBD_CDC_EP0_RxReady(USBD_HandleTypeDef *pdev) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *)pdev->pClassDataCmsit[pdev->classId]; + + if (hcdc == NULL) + { + return (uint8_t)USBD_FAIL; + } + + if ((pdev->pUserData[pdev->classId] != NULL) && (hcdc->CmdOpCode != 0xFFU)) + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData[pdev->classId])->Control(hcdc->CmdOpCode, + (uint8_t *)hcdc->data, + (uint16_t)hcdc->CmdLength); + hcdc->CmdOpCode = 0xFFU; + } + + return (uint8_t)USBD_OK; +} +#ifndef USE_USBD_COMPOSITE +/** + * @brief USBD_CDC_GetFSCfgDesc + * Return configuration descriptor + * @param length : pointer data length + * @retval pointer to descriptor buffer + */ +static uint8_t *USBD_CDC_GetFSCfgDesc(uint16_t *length) +{ + USBD_EpDescTypeDef *pEpCmdDesc = USBD_GetEpDesc(USBD_CDC_CfgDesc, CDC_CMD_EP); + USBD_EpDescTypeDef *pEpOutDesc = USBD_GetEpDesc(USBD_CDC_CfgDesc, CDC_OUT_EP); + USBD_EpDescTypeDef *pEpInDesc = USBD_GetEpDesc(USBD_CDC_CfgDesc, CDC_IN_EP); + + if (pEpCmdDesc != NULL) + { + pEpCmdDesc->bInterval = CDC_FS_BINTERVAL; + } + + if (pEpOutDesc != NULL) + { + pEpOutDesc->wMaxPacketSize = CDC_DATA_FS_MAX_PACKET_SIZE; + } + + if (pEpInDesc != NULL) + { + pEpInDesc->wMaxPacketSize = CDC_DATA_FS_MAX_PACKET_SIZE; + } + + *length = (uint16_t)sizeof(USBD_CDC_CfgDesc); + return USBD_CDC_CfgDesc; +} + +/** + * @brief USBD_CDC_GetHSCfgDesc + * Return configuration descriptor + * @param length : pointer data length + * @retval pointer to descriptor buffer + */ +static uint8_t *USBD_CDC_GetHSCfgDesc(uint16_t *length) +{ + USBD_EpDescTypeDef *pEpCmdDesc = USBD_GetEpDesc(USBD_CDC_CfgDesc, CDC_CMD_EP); + USBD_EpDescTypeDef *pEpOutDesc = USBD_GetEpDesc(USBD_CDC_CfgDesc, CDC_OUT_EP); + USBD_EpDescTypeDef *pEpInDesc = USBD_GetEpDesc(USBD_CDC_CfgDesc, CDC_IN_EP); + + if (pEpCmdDesc != NULL) + { + pEpCmdDesc->bInterval = CDC_HS_BINTERVAL; + } + + if (pEpOutDesc != NULL) + { + pEpOutDesc->wMaxPacketSize = CDC_DATA_HS_MAX_PACKET_SIZE; + } + + if (pEpInDesc != NULL) + { + pEpInDesc->wMaxPacketSize = CDC_DATA_HS_MAX_PACKET_SIZE; + } + + *length = (uint16_t)sizeof(USBD_CDC_CfgDesc); + return USBD_CDC_CfgDesc; +} + +/** + * @brief USBD_CDC_GetOtherSpeedCfgDesc + * Return configuration descriptor + * @param length : pointer data length + * @retval pointer to descriptor buffer + */ +static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc(uint16_t *length) +{ + USBD_EpDescTypeDef *pEpCmdDesc = USBD_GetEpDesc(USBD_CDC_CfgDesc, CDC_CMD_EP); + USBD_EpDescTypeDef *pEpOutDesc = USBD_GetEpDesc(USBD_CDC_CfgDesc, CDC_OUT_EP); + USBD_EpDescTypeDef *pEpInDesc = USBD_GetEpDesc(USBD_CDC_CfgDesc, CDC_IN_EP); + + if (pEpCmdDesc != NULL) + { + pEpCmdDesc->bInterval = CDC_FS_BINTERVAL; + } + + if (pEpOutDesc != NULL) + { + pEpOutDesc->wMaxPacketSize = CDC_DATA_FS_MAX_PACKET_SIZE; + } + + if (pEpInDesc != NULL) + { + pEpInDesc->wMaxPacketSize = CDC_DATA_FS_MAX_PACKET_SIZE; + } + + *length = (uint16_t)sizeof(USBD_CDC_CfgDesc); + return USBD_CDC_CfgDesc; +} + +/** + * @brief USBD_CDC_GetDeviceQualifierDescriptor + * return Device Qualifier descriptor + * @param length : pointer data length + * @retval pointer to descriptor buffer + */ +uint8_t *USBD_CDC_GetDeviceQualifierDescriptor(uint16_t *length) +{ + *length = (uint16_t)sizeof(USBD_CDC_DeviceQualifierDesc); + + return USBD_CDC_DeviceQualifierDesc; +} +#endif /* USE_USBD_COMPOSITE */ +/** + * @brief USBD_CDC_RegisterInterface + * @param pdev: device instance + * @param fops: CD Interface callback + * @retval status + */ +uint8_t USBD_CDC_RegisterInterface(USBD_HandleTypeDef *pdev, + USBD_CDC_ItfTypeDef *fops) +{ + if (fops == NULL) + { + return (uint8_t)USBD_FAIL; + } + + pdev->pUserData[pdev->classId] = fops; + + return (uint8_t)USBD_OK; +} + + +/** + * @brief USBD_CDC_SetTxBuffer + * @param pdev: device instance + * @param pbuff: Tx Buffer + * @param length: length of data to be sent + * @param ClassId: The Class ID + * @retval status + */ +#ifdef USE_USBD_COMPOSITE +uint8_t USBD_CDC_SetTxBuffer(USBD_HandleTypeDef *pdev, + uint8_t *pbuff, uint32_t length, uint8_t ClassId) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *)pdev->pClassDataCmsit[ClassId]; +#else +uint8_t USBD_CDC_SetTxBuffer(USBD_HandleTypeDef *pdev, + uint8_t *pbuff, uint32_t length) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *)pdev->pClassDataCmsit[pdev->classId]; +#endif /* USE_USBD_COMPOSITE */ + + if (hcdc == NULL) + { + return (uint8_t)USBD_FAIL; + } + + hcdc->TxBuffer = pbuff; + hcdc->TxLength = length; + + return (uint8_t)USBD_OK; +} + +/** + * @brief USBD_CDC_SetRxBuffer + * @param pdev: device instance + * @param pbuff: Rx Buffer + * @retval status + */ +uint8_t USBD_CDC_SetRxBuffer(USBD_HandleTypeDef *pdev, uint8_t *pbuff) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *)pdev->pClassDataCmsit[pdev->classId]; + + if (hcdc == NULL) + { + return (uint8_t)USBD_FAIL; + } + + hcdc->RxBuffer = pbuff; + + return (uint8_t)USBD_OK; +} + + +/** + * @brief USBD_CDC_TransmitPacket + * Transmit packet on IN endpoint + * @param pdev: device instance + * @param ClassId: The Class ID + * @retval status + */ +#ifdef USE_USBD_COMPOSITE +uint8_t USBD_CDC_TransmitPacket(USBD_HandleTypeDef *pdev, uint8_t ClassId) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *)pdev->pClassDataCmsit[ClassId]; +#else +uint8_t USBD_CDC_TransmitPacket(USBD_HandleTypeDef *pdev) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *)pdev->pClassDataCmsit[pdev->classId]; +#endif /* USE_USBD_COMPOSITE */ + + USBD_StatusTypeDef ret = USBD_BUSY; + +#ifdef USE_USBD_COMPOSITE + /* Get the Endpoints addresses allocated for this class instance */ + CDCInEpAdd = USBD_CoreGetEPAdd(pdev, USBD_EP_IN, USBD_EP_TYPE_BULK, ClassId); +#endif /* USE_USBD_COMPOSITE */ + + if (hcdc == NULL) + { + return (uint8_t)USBD_FAIL; + } + + if (hcdc->TxState == 0U) + { + /* Tx Transfer in progress */ + hcdc->TxState = 1U; + + /* Update the packet total length */ + pdev->ep_in[CDCInEpAdd & 0xFU].total_length = hcdc->TxLength; + + /* Transmit next packet */ + (void)USBD_LL_Transmit(pdev, CDCInEpAdd, hcdc->TxBuffer, hcdc->TxLength); + + ret = USBD_OK; + } + + return (uint8_t)ret; +} + +/** + * @brief USBD_CDC_ReceivePacket + * prepare OUT Endpoint for reception + * @param pdev: device instance + * @retval status + */ +uint8_t USBD_CDC_ReceivePacket(USBD_HandleTypeDef *pdev) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *)pdev->pClassDataCmsit[pdev->classId]; + +#ifdef USE_USBD_COMPOSITE + /* Get the Endpoints addresses allocated for this class instance */ + CDCOutEpAdd = USBD_CoreGetEPAdd(pdev, USBD_EP_OUT, USBD_EP_TYPE_BULK, (uint8_t)pdev->classId); +#endif /* USE_USBD_COMPOSITE */ + + if (pdev->pClassDataCmsit[pdev->classId] == NULL) + { + return (uint8_t)USBD_FAIL; + } + + if (pdev->dev_speed == USBD_SPEED_HIGH) + { + /* Prepare Out endpoint to receive next packet */ + (void)USBD_LL_PrepareReceive(pdev, CDCOutEpAdd, hcdc->RxBuffer, + CDC_DATA_HS_OUT_PACKET_SIZE); + } + else + { + /* Prepare Out endpoint to receive next packet */ + (void)USBD_LL_PrepareReceive(pdev, CDCOutEpAdd, hcdc->RxBuffer, + CDC_DATA_FS_OUT_PACKET_SIZE); + } + + return (uint8_t)USBD_OK; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h b/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h new file mode 100644 index 0000000..d601672 --- /dev/null +++ b/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h @@ -0,0 +1,172 @@ +/** + ****************************************************************************** + * @file usbd_core.h + * @author MCD Application Team + * @brief Header file for usbd_core.c file + ****************************************************************************** + * @attention + * + * Copyright (c) 2015 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_CORE_H +#define __USBD_CORE_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_conf.h" +#include "usbd_def.h" +#include "usbd_ioreq.h" +#include "usbd_ctlreq.h" + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_CORE + * @brief This file is the Header file for usbd_core.c file + * @{ + */ + + +/** @defgroup USBD_CORE_Exported_Defines + * @{ + */ +#ifndef USBD_DEBUG_LEVEL +#define USBD_DEBUG_LEVEL 0U +#endif /* USBD_DEBUG_LEVEL */ +/** + * @} + */ + + +/** @defgroup USBD_CORE_Exported_TypesDefinitions + * @{ + */ + + +/** + * @} + */ + + + +/** @defgroup USBD_CORE_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_CORE_Exported_Variables + * @{ + */ +#define USBD_SOF USBD_LL_SOF +/** + * @} + */ + +/** @defgroup USBD_CORE_Exported_FunctionsPrototype + * @{ + */ +USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id); +USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_Start(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_Stop(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass); + +#ifdef USE_USBD_COMPOSITE +USBD_StatusTypeDef USBD_RegisterClassComposite(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass, + USBD_CompositeClassTypeDef classtype, uint8_t *EpAddr); + +USBD_StatusTypeDef USBD_UnRegisterClassComposite(USBD_HandleTypeDef *pdev); +uint8_t USBD_CoreGetEPAdd(USBD_HandleTypeDef *pdev, uint8_t ep_dir, uint8_t ep_type, uint8_t ClassId); +#endif /* USE_USBD_COMPOSITE */ + +uint8_t USBD_CoreFindIF(USBD_HandleTypeDef *pdev, uint8_t index); +uint8_t USBD_CoreFindEP(USBD_HandleTypeDef *pdev, uint8_t index); + +USBD_StatusTypeDef USBD_RunTestMode(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx); +USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx); + +USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup); +USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev, uint8_t epnum, uint8_t *pdata); +USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev, uint8_t epnum, uint8_t *pdata); + +USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed); +USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev); + +USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum); +USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum); + +USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev); + +/* USBD Low Level Driver */ +USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev); + +USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr, + uint8_t ep_type, uint16_t ep_mps); + +USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr); +USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr); +USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr); +USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr); +USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr); + +USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, uint8_t ep_addr, + uint8_t *pbuf, uint32_t size); + +USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, uint8_t ep_addr, + uint8_t *pbuf, uint32_t size); + +#ifdef USBD_HS_TESTMODE_ENABLE +USBD_StatusTypeDef USBD_LL_SetTestMode(USBD_HandleTypeDef *pdev, uint8_t testmode); +#endif /* USBD_HS_TESTMODE_ENABLE */ + +uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr); +uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr); + +void USBD_LL_Delay(uint32_t Delay); + +void *USBD_GetEpDesc(uint8_t *pConfDesc, uint8_t EpAddr); +USBD_DescHeaderTypeDef *USBD_GetNextDesc(uint8_t *pbuf, uint16_t *ptr); + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_CORE_H */ + +/** + * @} + */ + +/** + * @} + */ + + diff --git a/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h b/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h new file mode 100644 index 0000000..6c45d6c --- /dev/null +++ b/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h @@ -0,0 +1,101 @@ +/** + ****************************************************************************** + * @file usbd_req.h + * @author MCD Application Team + * @brief Header file for the usbd_req.c file + ****************************************************************************** + * @attention + * + * Copyright (c) 2015 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_REQUEST_H +#define __USB_REQUEST_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_def.h" + + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_REQ + * @brief header file for the usbd_req.c file + * @{ + */ + +/** @defgroup USBD_REQ_Exported_Defines + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_REQ_Exported_Types + * @{ + */ +/** + * @} + */ + + + +/** @defgroup USBD_REQ_Exported_Macros + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_REQ_Exported_Variables + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_REQ_Exported_FunctionsPrototype + * @{ + */ + +USBD_StatusTypeDef USBD_StdDevReq(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); +USBD_StatusTypeDef USBD_StdItfReq(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); +USBD_StatusTypeDef USBD_StdEPReq(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); + +void USBD_CtlError(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); +void USBD_ParseSetupRequest(USBD_SetupReqTypedef *req, uint8_t *pdata); +void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len); + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USB_REQUEST_H */ + +/** + * @} + */ + +/** + * @} + */ + + diff --git a/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h b/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h new file mode 100644 index 0000000..3c1902f --- /dev/null +++ b/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h @@ -0,0 +1,514 @@ +/** + ****************************************************************************** + * @file usbd_def.h + * @author MCD Application Team + * @brief General defines for the usb device library + ****************************************************************************** + * @attention + * + * Copyright (c) 2015 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_DEF_H +#define __USBD_DEF_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_conf.h" + +/** @addtogroup STM32_USBD_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USB_DEF + * @brief general defines for the usb device library file + * @{ + */ + +/** @defgroup USB_DEF_Exported_Defines + * @{ + */ + +#ifndef NULL +#define NULL 0U +#endif /* NULL */ + +#ifndef USBD_MAX_NUM_INTERFACES +#define USBD_MAX_NUM_INTERFACES 1U +#endif /* USBD_MAX_NUM_CONFIGURATION */ + +#ifndef USBD_MAX_NUM_CONFIGURATION +#define USBD_MAX_NUM_CONFIGURATION 1U +#endif /* USBD_MAX_NUM_CONFIGURATION */ + +#ifdef USE_USBD_COMPOSITE +#ifndef USBD_MAX_SUPPORTED_CLASS +#define USBD_MAX_SUPPORTED_CLASS 4U +#endif /* USBD_MAX_SUPPORTED_CLASS */ +#else +#ifndef USBD_MAX_SUPPORTED_CLASS +#define USBD_MAX_SUPPORTED_CLASS 1U +#endif /* USBD_MAX_SUPPORTED_CLASS */ +#endif /* USE_USBD_COMPOSITE */ + +#ifndef USBD_MAX_CLASS_ENDPOINTS +#define USBD_MAX_CLASS_ENDPOINTS 5U +#endif /* USBD_MAX_CLASS_ENDPOINTS */ + +#ifndef USBD_MAX_CLASS_INTERFACES +#define USBD_MAX_CLASS_INTERFACES 5U +#endif /* USBD_MAX_CLASS_INTERFACES */ + +#ifndef USBD_LPM_ENABLED +#define USBD_LPM_ENABLED 0U +#endif /* USBD_LPM_ENABLED */ + +#ifndef USBD_SELF_POWERED +#define USBD_SELF_POWERED 1U +#endif /*USBD_SELF_POWERED */ + +#ifndef USBD_MAX_POWER +#define USBD_MAX_POWER 0x32U /* 100 mA */ +#endif /* USBD_MAX_POWER */ + +#ifndef USBD_SUPPORT_USER_STRING_DESC +#define USBD_SUPPORT_USER_STRING_DESC 0U +#endif /* USBD_SUPPORT_USER_STRING_DESC */ + +#ifndef USBD_CLASS_USER_STRING_DESC +#define USBD_CLASS_USER_STRING_DESC 0U +#endif /* USBD_CLASS_USER_STRING_DESC */ + +#define USB_LEN_DEV_QUALIFIER_DESC 0x0AU +#define USB_LEN_DEV_DESC 0x12U +#define USB_LEN_CFG_DESC 0x09U +#define USB_LEN_IF_DESC 0x09U +#define USB_LEN_EP_DESC 0x07U +#define USB_LEN_OTG_DESC 0x03U +#define USB_LEN_LANGID_STR_DESC 0x04U +#define USB_LEN_OTHER_SPEED_DESC_SIZ 0x09U + +#define USBD_IDX_LANGID_STR 0x00U +#define USBD_IDX_MFC_STR 0x01U +#define USBD_IDX_PRODUCT_STR 0x02U +#define USBD_IDX_SERIAL_STR 0x03U +#define USBD_IDX_CONFIG_STR 0x04U +#define USBD_IDX_INTERFACE_STR 0x05U + +#define USB_REQ_TYPE_STANDARD 0x00U +#define USB_REQ_TYPE_CLASS 0x20U +#define USB_REQ_TYPE_VENDOR 0x40U +#define USB_REQ_TYPE_MASK 0x60U + +#define USB_REQ_RECIPIENT_DEVICE 0x00U +#define USB_REQ_RECIPIENT_INTERFACE 0x01U +#define USB_REQ_RECIPIENT_ENDPOINT 0x02U +#define USB_REQ_RECIPIENT_MASK 0x03U + +#define USB_REQ_GET_STATUS 0x00U +#define USB_REQ_CLEAR_FEATURE 0x01U +#define USB_REQ_SET_FEATURE 0x03U +#define USB_REQ_SET_ADDRESS 0x05U +#define USB_REQ_GET_DESCRIPTOR 0x06U +#define USB_REQ_SET_DESCRIPTOR 0x07U +#define USB_REQ_GET_CONFIGURATION 0x08U +#define USB_REQ_SET_CONFIGURATION 0x09U +#define USB_REQ_GET_INTERFACE 0x0AU +#define USB_REQ_SET_INTERFACE 0x0BU +#define USB_REQ_SYNCH_FRAME 0x0CU + +#define USB_DESC_TYPE_DEVICE 0x01U +#define USB_DESC_TYPE_CONFIGURATION 0x02U +#define USB_DESC_TYPE_STRING 0x03U +#define USB_DESC_TYPE_INTERFACE 0x04U +#define USB_DESC_TYPE_ENDPOINT 0x05U +#define USB_DESC_TYPE_DEVICE_QUALIFIER 0x06U +#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 0x07U +#define USB_DESC_TYPE_IAD 0x0BU +#define USB_DESC_TYPE_BOS 0x0FU + +#define USB_CONFIG_REMOTE_WAKEUP 0x02U +#define USB_CONFIG_SELF_POWERED 0x01U + +#define USB_FEATURE_EP_HALT 0x00U +#define USB_FEATURE_REMOTE_WAKEUP 0x01U +#define USB_FEATURE_TEST_MODE 0x02U + +#define USB_DEVICE_CAPABITY_TYPE 0x10U + +#define USB_CONF_DESC_SIZE 0x09U +#define USB_IF_DESC_SIZE 0x09U +#define USB_EP_DESC_SIZE 0x07U +#define USB_IAD_DESC_SIZE 0x08U + +#define USB_HS_MAX_PACKET_SIZE 512U +#define USB_FS_MAX_PACKET_SIZE 64U +#define USB_MAX_EP0_SIZE 64U + +/* Device Status */ +#define USBD_STATE_DEFAULT 0x01U +#define USBD_STATE_ADDRESSED 0x02U +#define USBD_STATE_CONFIGURED 0x03U +#define USBD_STATE_SUSPENDED 0x04U + + +/* EP0 State */ +#define USBD_EP0_IDLE 0x00U +#define USBD_EP0_SETUP 0x01U +#define USBD_EP0_DATA_IN 0x02U +#define USBD_EP0_DATA_OUT 0x03U +#define USBD_EP0_STATUS_IN 0x04U +#define USBD_EP0_STATUS_OUT 0x05U +#define USBD_EP0_STALL 0x06U + +#define USBD_EP_TYPE_CTRL 0x00U +#define USBD_EP_TYPE_ISOC 0x01U +#define USBD_EP_TYPE_BULK 0x02U +#define USBD_EP_TYPE_INTR 0x03U + +#ifdef USE_USBD_COMPOSITE +#define USBD_EP_IN 0x80U +#define USBD_EP_OUT 0x00U +#define USBD_FUNC_DESCRIPTOR_TYPE 0x24U +#define USBD_DESC_SUBTYPE_ACM 0x0FU +#define USBD_DESC_ECM_BCD_LOW 0x00U +#define USBD_DESC_ECM_BCD_HIGH 0x10U +#endif /* USE_USBD_COMPOSITE */ +/** + * @} + */ + + +/** @defgroup USBD_DEF_Exported_TypesDefinitions + * @{ + */ + +typedef struct usb_setup_req +{ + uint8_t bmRequest; + uint8_t bRequest; + uint16_t wValue; + uint16_t wIndex; + uint16_t wLength; +} USBD_SetupReqTypedef; + +typedef struct +{ + uint8_t bLength; + uint8_t bDescriptorType; + uint16_t wTotalLength; + uint8_t bNumInterfaces; + uint8_t bConfigurationValue; + uint8_t iConfiguration; + uint8_t bmAttributes; + uint8_t bMaxPower; +} __PACKED USBD_ConfigDescTypeDef; + +typedef struct +{ + uint8_t bLength; + uint8_t bDescriptorType; + uint16_t wTotalLength; + uint8_t bNumDeviceCaps; +} USBD_BosDescTypeDef; + +typedef struct +{ + uint8_t bLength; + uint8_t bDescriptorType; + uint8_t bEndpointAddress; + uint8_t bmAttributes; + uint16_t wMaxPacketSize; + uint8_t bInterval; +} __PACKED USBD_EpDescTypeDef; + +typedef struct +{ + uint8_t bLength; + uint8_t bDescriptorType; + uint8_t bDescriptorSubType; +} USBD_DescHeaderTypeDef; + +struct _USBD_HandleTypeDef; + +typedef struct _Device_cb +{ + uint8_t (*Init)(struct _USBD_HandleTypeDef *pdev, uint8_t cfgidx); + uint8_t (*DeInit)(struct _USBD_HandleTypeDef *pdev, uint8_t cfgidx); + /* Control Endpoints*/ + uint8_t (*Setup)(struct _USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); + uint8_t (*EP0_TxSent)(struct _USBD_HandleTypeDef *pdev); + uint8_t (*EP0_RxReady)(struct _USBD_HandleTypeDef *pdev); + /* Class Specific Endpoints*/ + uint8_t (*DataIn)(struct _USBD_HandleTypeDef *pdev, uint8_t epnum); + uint8_t (*DataOut)(struct _USBD_HandleTypeDef *pdev, uint8_t epnum); + uint8_t (*SOF)(struct _USBD_HandleTypeDef *pdev); + uint8_t (*IsoINIncomplete)(struct _USBD_HandleTypeDef *pdev, uint8_t epnum); + uint8_t (*IsoOUTIncomplete)(struct _USBD_HandleTypeDef *pdev, uint8_t epnum); + + uint8_t *(*GetHSConfigDescriptor)(uint16_t *length); + uint8_t *(*GetFSConfigDescriptor)(uint16_t *length); + uint8_t *(*GetOtherSpeedConfigDescriptor)(uint16_t *length); + uint8_t *(*GetDeviceQualifierDescriptor)(uint16_t *length); +#if (USBD_SUPPORT_USER_STRING_DESC == 1U) + uint8_t *(*GetUsrStrDescriptor)(struct _USBD_HandleTypeDef *pdev, uint8_t index, uint16_t *length); +#endif /* USBD_SUPPORT_USER_STRING_DESC */ + +} USBD_ClassTypeDef; + +/* Following USB Device Speed */ +typedef enum +{ + USBD_SPEED_HIGH = 0U, + USBD_SPEED_FULL = 1U, + USBD_SPEED_LOW = 2U, +} USBD_SpeedTypeDef; + +/* Following USB Device status */ +typedef enum +{ + USBD_OK = 0U, + USBD_BUSY, + USBD_EMEM, + USBD_FAIL, +} USBD_StatusTypeDef; + +/* USB Device descriptors structure */ +typedef struct +{ + uint8_t *(*GetDeviceDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length); + uint8_t *(*GetLangIDStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length); + uint8_t *(*GetManufacturerStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length); + uint8_t *(*GetProductStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length); + uint8_t *(*GetSerialStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length); + uint8_t *(*GetConfigurationStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length); + uint8_t *(*GetInterfaceStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length); +#if (USBD_CLASS_USER_STRING_DESC == 1) + uint8_t *(*GetUserStrDescriptor)(USBD_SpeedTypeDef speed, uint8_t idx, uint16_t *length); +#endif /* USBD_CLASS_USER_STRING_DESC */ +#if ((USBD_LPM_ENABLED == 1U) || (USBD_CLASS_BOS_ENABLED == 1)) + uint8_t *(*GetBOSDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length); +#endif /* (USBD_LPM_ENABLED == 1U) || (USBD_CLASS_BOS_ENABLED == 1) */ +} USBD_DescriptorsTypeDef; + +/* USB Device handle structure */ +typedef struct +{ + uint32_t status; + uint32_t total_length; + uint32_t rem_length; + uint32_t maxpacket; + uint16_t is_used; + uint16_t bInterval; +} USBD_EndpointTypeDef; + +#ifdef USE_USBD_COMPOSITE +typedef enum +{ + CLASS_TYPE_NONE = 0, + CLASS_TYPE_HID = 1, + CLASS_TYPE_CDC = 2, + CLASS_TYPE_MSC = 3, + CLASS_TYPE_DFU = 4, + CLASS_TYPE_CHID = 5, + CLASS_TYPE_AUDIO = 6, + CLASS_TYPE_ECM = 7, + CLASS_TYPE_RNDIS = 8, + CLASS_TYPE_MTP = 9, + CLASS_TYPE_VIDEO = 10, + CLASS_TYPE_PRINTER = 11, + CLASS_TYPE_CCID = 12, +} USBD_CompositeClassTypeDef; + + +/* USB Device handle structure */ +typedef struct +{ + uint8_t add; + uint8_t type; + uint8_t size; + uint8_t is_used; +} USBD_EPTypeDef; + +/* USB Device handle structure */ +typedef struct +{ + USBD_CompositeClassTypeDef ClassType; + uint32_t ClassId; + uint32_t Active; + uint32_t NumEps; + USBD_EPTypeDef Eps[USBD_MAX_CLASS_ENDPOINTS]; + uint8_t *EpAdd; + uint32_t NumIf; + uint8_t Ifs[USBD_MAX_CLASS_INTERFACES]; + uint32_t CurrPcktSze; +} USBD_CompositeElementTypeDef; +#endif /* USE_USBD_COMPOSITE */ + +/* USB Device handle structure */ +typedef struct _USBD_HandleTypeDef +{ + uint8_t id; + uint32_t dev_config; + uint32_t dev_default_config; + uint32_t dev_config_status; + USBD_SpeedTypeDef dev_speed; + USBD_EndpointTypeDef ep_in[16]; + USBD_EndpointTypeDef ep_out[16]; + __IO uint32_t ep0_state; + uint32_t ep0_data_len; + __IO uint8_t dev_state; + __IO uint8_t dev_old_state; + uint8_t dev_address; + uint8_t dev_connection_status; + uint8_t dev_test_mode; + uint32_t dev_remote_wakeup; + uint8_t ConfIdx; + + USBD_SetupReqTypedef request; + USBD_DescriptorsTypeDef *pDesc; + USBD_ClassTypeDef *pClass[USBD_MAX_SUPPORTED_CLASS]; + void *pClassData; + void *pClassDataCmsit[USBD_MAX_SUPPORTED_CLASS]; + void *pUserData[USBD_MAX_SUPPORTED_CLASS]; + void *pData; + void *pBosDesc; + void *pConfDesc; + uint32_t classId; + uint32_t NumClasses; +#ifdef USE_USBD_COMPOSITE + USBD_CompositeElementTypeDef tclasslist[USBD_MAX_SUPPORTED_CLASS]; +#endif /* USE_USBD_COMPOSITE */ +} USBD_HandleTypeDef; + +/* USB Device endpoint direction */ +typedef enum +{ + OUT = 0x00, + IN = 0x80, +} USBD_EPDirectionTypeDef; + +typedef enum +{ + NETWORK_CONNECTION = 0x00, + RESPONSE_AVAILABLE = 0x01, + CONNECTION_SPEED_CHANGE = 0x2A +} USBD_CDC_NotifCodeTypeDef; +/** + * @} + */ + + + +/** @defgroup USBD_DEF_Exported_Macros + * @{ + */ +__STATIC_INLINE uint16_t SWAPBYTE(uint8_t *addr) +{ + uint16_t _SwapVal, _Byte1, _Byte2; + uint8_t *_pbuff = addr; + + _Byte1 = *(uint8_t *)_pbuff; + _pbuff++; + _Byte2 = *(uint8_t *)_pbuff; + + _SwapVal = (_Byte2 << 8) | _Byte1; + + return _SwapVal; +} + +#ifndef LOBYTE +#define LOBYTE(x) ((uint8_t)((x) & 0x00FFU)) +#endif /* LOBYTE */ + +#ifndef HIBYTE +#define HIBYTE(x) ((uint8_t)(((x) & 0xFF00U) >> 8U)) +#endif /* HIBYTE */ + +#ifndef MIN +#define MIN(a, b) (((a) < (b)) ? (a) : (b)) +#endif /* MIN */ + +#ifndef MAX +#define MAX(a, b) (((a) > (b)) ? (a) : (b)) +#endif /* MAX */ + +#if defined ( __GNUC__ ) +#ifndef __weak +#define __weak __attribute__((weak)) +#endif /* __weak */ +#ifndef __packed +#define __packed __attribute__((__packed__)) +#endif /* __packed */ +#endif /* __GNUC__ */ + + +/* In HS mode and when the DMA is used, all variables and data structures dealing + with the DMA during the transaction process should be 4-bytes aligned */ + +#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ +#ifndef __ALIGN_END +#define __ALIGN_END __attribute__ ((aligned (4U))) +#endif /* __ALIGN_END */ +#ifndef __ALIGN_BEGIN +#define __ALIGN_BEGIN +#endif /* __ALIGN_BEGIN */ +#else +#ifndef __ALIGN_END +#define __ALIGN_END +#endif /* __ALIGN_END */ +#ifndef __ALIGN_BEGIN +#if defined (__CC_ARM) /* ARM Compiler */ +#define __ALIGN_BEGIN __align(4U) +#elif defined (__ICCARM__) /* IAR Compiler */ +#define __ALIGN_BEGIN +#endif /* __CC_ARM */ +#endif /* __ALIGN_BEGIN */ +#endif /* __GNUC__ */ + + +/** + * @} + */ + +/** @defgroup USBD_DEF_Exported_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_DEF_Exported_FunctionsPrototype + * @{ + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_DEF_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h b/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h new file mode 100644 index 0000000..15197b9 --- /dev/null +++ b/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h @@ -0,0 +1,113 @@ +/** + ****************************************************************************** + * @file usbd_ioreq.h + * @author MCD Application Team + * @brief Header file for the usbd_ioreq.c file + ****************************************************************************** + * @attention + * + * Copyright (c) 2015 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_IOREQ_H +#define __USBD_IOREQ_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_def.h" +#include "usbd_core.h" + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_IOREQ + * @brief header file for the usbd_ioreq.c file + * @{ + */ + +/** @defgroup USBD_IOREQ_Exported_Defines + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Exported_Types + * @{ + */ + + +/** + * @} + */ + + + +/** @defgroup USBD_IOREQ_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_IOREQ_Exported_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_IOREQ_Exported_FunctionsPrototype + * @{ + */ + +USBD_StatusTypeDef USBD_CtlSendData(USBD_HandleTypeDef *pdev, + uint8_t *pbuf, uint32_t len); + +USBD_StatusTypeDef USBD_CtlContinueSendData(USBD_HandleTypeDef *pdev, + uint8_t *pbuf, uint32_t len); + +USBD_StatusTypeDef USBD_CtlPrepareRx(USBD_HandleTypeDef *pdev, + uint8_t *pbuf, uint32_t len); + +USBD_StatusTypeDef USBD_CtlContinueRx(USBD_HandleTypeDef *pdev, + uint8_t *pbuf, uint32_t len); + +USBD_StatusTypeDef USBD_CtlSendStatus(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_CtlReceiveStatus(USBD_HandleTypeDef *pdev); + +uint32_t USBD_GetRxCount(USBD_HandleTypeDef *pdev, uint8_t ep_addr); + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_IOREQ_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c b/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c new file mode 100644 index 0000000..bdac79c --- /dev/null +++ b/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c @@ -0,0 +1,1221 @@ +/** + ****************************************************************************** + * @file usbd_core.c + * @author MCD Application Team + * @brief This file provides all the USBD core functions. + ****************************************************************************** + * @attention + * + * Copyright (c) 2015 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_core.h" + +#ifdef USE_USBD_COMPOSITE +#include "usbd_composite_builder.h" +#endif /* USE_USBD_COMPOSITE */ + +/** @addtogroup STM32_USBD_DEVICE_LIBRARY + * @{ + */ + + +/** @defgroup USBD_CORE + * @brief usbd core module + * @{ + */ + +/** @defgroup USBD_CORE_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_CORE_Private_Defines + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_CORE_Private_Macros + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_CORE_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_CORE_Private_Variables + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_CORE_Private_Functions + * @{ + */ + +/** + * @brief USBD_Init + * Initializes the device stack and load the class driver + * @param pdev: device instance + * @param pdesc: Descriptor structure address + * @param id: Low level core index + * @retval None + */ +USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, + USBD_DescriptorsTypeDef *pdesc, uint8_t id) +{ + USBD_StatusTypeDef ret; + + /* Check whether the USB Host handle is valid */ + if (pdev == NULL) + { +#if (USBD_DEBUG_LEVEL > 1U) + USBD_ErrLog("Invalid Device handle"); +#endif /* (USBD_DEBUG_LEVEL > 1U) */ + return USBD_FAIL; + } + +#ifdef USE_USBD_COMPOSITE + /* Parse the table of classes in use */ + for (uint32_t i = 0; i < USBD_MAX_SUPPORTED_CLASS; i++) + { + /* Unlink previous class*/ + pdev->pClass[i] = NULL; + pdev->pUserData[i] = NULL; + + /* Set class as inactive */ + pdev->tclasslist[i].Active = 0; + pdev->NumClasses = 0; + pdev->classId = 0; + } +#else + /* Unlink previous class*/ + pdev->pClass[0] = NULL; + pdev->pUserData[0] = NULL; +#endif /* USE_USBD_COMPOSITE */ + + pdev->pConfDesc = NULL; + + /* Assign USBD Descriptors */ + if (pdesc != NULL) + { + pdev->pDesc = pdesc; + } + + /* Set Device initial State */ + pdev->dev_state = USBD_STATE_DEFAULT; + pdev->id = id; + + /* Initialize low level driver */ + ret = USBD_LL_Init(pdev); + + return ret; +} + +/** + * @brief USBD_DeInit + * Re-Initialize the device library + * @param pdev: device instance + * @retval status: status + */ +USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev) +{ + USBD_StatusTypeDef ret; + + /* Disconnect the USB Device */ + (void)USBD_LL_Stop(pdev); + + /* Set Default State */ + pdev->dev_state = USBD_STATE_DEFAULT; + +#ifdef USE_USBD_COMPOSITE + /* Parse the table of classes in use */ + for (uint32_t i = 0; i < USBD_MAX_SUPPORTED_CLASS; i++) + { + /* Check if current class is in use */ + if ((pdev->tclasslist[i].Active) == 1U) + { + if (pdev->pClass[i] != NULL) + { + pdev->classId = i; + /* Free Class Resources */ + pdev->pClass[i]->DeInit(pdev, (uint8_t)pdev->dev_config); + } + } + } +#else + /* Free Class Resources */ + if (pdev->pClass[0] != NULL) + { + pdev->pClass[0]->DeInit(pdev, (uint8_t)pdev->dev_config); + } + + pdev->pUserData[0] = NULL; + +#endif /* USE_USBD_COMPOSITE */ + + /* Free Device descriptors resources */ + pdev->pDesc = NULL; + pdev->pConfDesc = NULL; + + /* DeInitialize low level driver */ + ret = USBD_LL_DeInit(pdev); + + return ret; +} + +/** + * @brief USBD_RegisterClass + * Link class driver to Device Core. + * @param pDevice : Device Handle + * @param pclass: Class handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass) +{ + uint16_t len = 0U; + + if (pclass == NULL) + { +#if (USBD_DEBUG_LEVEL > 1U) + USBD_ErrLog("Invalid Class handle"); +#endif /* (USBD_DEBUG_LEVEL > 1U) */ + return USBD_FAIL; + } + + /* link the class to the USB Device handle */ + pdev->pClass[0] = pclass; + + /* Get Device Configuration Descriptor */ +#ifdef USE_USB_HS + if (pdev->pClass[pdev->classId]->GetHSConfigDescriptor != NULL) + { + pdev->pConfDesc = (void *)pdev->pClass[pdev->classId]->GetHSConfigDescriptor(&len); + } +#else /* Default USE_USB_FS */ + if (pdev->pClass[pdev->classId]->GetFSConfigDescriptor != NULL) + { + pdev->pConfDesc = (void *)pdev->pClass[pdev->classId]->GetFSConfigDescriptor(&len); + } +#endif /* USE_USB_FS */ + + /* Increment the NumClasses */ + pdev->NumClasses ++; + + return USBD_OK; +} + +#ifdef USE_USBD_COMPOSITE +/** + * @brief USBD_RegisterClassComposite + * Link class driver to Device Core. + * @param pdev : Device Handle + * @param pclass: Class handle + * @param classtype: Class type + * @param EpAddr: Endpoint Address handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_RegisterClassComposite(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass, + USBD_CompositeClassTypeDef classtype, uint8_t *EpAddr) +{ + USBD_StatusTypeDef ret = USBD_OK; + uint16_t len = 0U; + + if ((pdev->classId < USBD_MAX_SUPPORTED_CLASS) && (pdev->NumClasses < USBD_MAX_SUPPORTED_CLASS)) + { + if ((uint32_t)pclass != 0U) + { + /* Link the class to the USB Device handle */ + pdev->pClass[pdev->classId] = pclass; + ret = USBD_OK; + + pdev->tclasslist[pdev->classId].EpAdd = EpAddr; + + /* Call the composite class builder */ + (void)USBD_CMPSIT_AddClass(pdev, pclass, classtype, 0); + + /* Increment the ClassId for the next occurrence */ + pdev->classId ++; + pdev->NumClasses ++; + } + else + { +#if (USBD_DEBUG_LEVEL > 1U) + USBD_ErrLog("Invalid Class handle"); +#endif /* (USBD_DEBUG_LEVEL > 1U) */ + ret = USBD_FAIL; + } + } + + if (ret == USBD_OK) + { + /* Get Device Configuration Descriptor */ +#ifdef USE_USB_HS + pdev->pConfDesc = USBD_CMPSIT.GetHSConfigDescriptor(&len); +#else /* Default USE_USB_FS */ + pdev->pConfDesc = USBD_CMPSIT.GetFSConfigDescriptor(&len); +#endif /* USE_USB_FS */ + } + + return ret; +} + +/** + * @brief USBD_UnRegisterClassComposite + * UnLink all composite class drivers from Device Core. + * @param pDevice : Device Handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_UnRegisterClassComposite(USBD_HandleTypeDef *pdev) +{ + USBD_StatusTypeDef ret = USBD_FAIL; + uint8_t idx1; + uint8_t idx2; + + /* Unroll all activated classes */ + for (idx1 = 0; idx1 < pdev->NumClasses; idx1++) + { + /* Check if the class correspond to the requested type and if it is active */ + if (pdev->tclasslist[idx1].Active == 1U) + { + /* Set the new class ID */ + pdev->classId = idx1; + + /* Free resources used by the selected class */ + if (pdev->pClass[pdev->classId] != NULL) + { + /* Free Class Resources */ + if (pdev->pClass[pdev->classId]->DeInit(pdev, (uint8_t)pdev->dev_config) != 0U) + { +#if (USBD_DEBUG_LEVEL > 1U) + USBD_ErrLog("Class DeInit didn't succeed!, can't unregister selected class"); +#endif /* (USBD_DEBUG_LEVEL > 1U) */ + + ret = USBD_FAIL; + } + } + + /* Free the class pointer */ + pdev->pClass[pdev->classId] = NULL; + + /* Free the class location in classes table and reset its parameters to zero */ + pdev->tclasslist[pdev->classId].ClassType = CLASS_TYPE_NONE; + pdev->tclasslist[pdev->classId].ClassId = 0U; + pdev->tclasslist[pdev->classId].Active = 0U; + pdev->tclasslist[pdev->classId].NumEps = 0U; + pdev->tclasslist[pdev->classId].NumIf = 0U; + pdev->tclasslist[pdev->classId].CurrPcktSze = 0U; + + for (idx2 = 0U; idx2 < USBD_MAX_CLASS_ENDPOINTS; idx2++) + { + pdev->tclasslist[pdev->classId].Eps[idx2].add = 0U; + pdev->tclasslist[pdev->classId].Eps[idx2].type = 0U; + pdev->tclasslist[pdev->classId].Eps[idx2].size = 0U; + pdev->tclasslist[pdev->classId].Eps[idx2].is_used = 0U; + } + + for (idx2 = 0U; idx2 < USBD_MAX_CLASS_INTERFACES; idx2++) + { + pdev->tclasslist[pdev->classId].Ifs[idx2] = 0U; + } + } + } + + /* Reset the configuration descriptor */ + (void)USBD_CMPST_ClearConfDesc(pdev); + + /* Reset the class ID and number of classes */ + pdev->classId = 0U; + pdev->NumClasses = 0U; + + return ret; +} + + +#endif /* USE_USBD_COMPOSITE */ + +/** + * @brief USBD_Start + * Start the USB Device Core. + * @param pdev: Device Handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_Start(USBD_HandleTypeDef *pdev) +{ +#ifdef USE_USBD_COMPOSITE + pdev->classId = 0U; +#endif /* USE_USBD_COMPOSITE */ + + /* Start the low level driver */ + return USBD_LL_Start(pdev); +} + +/** + * @brief USBD_Stop + * Stop the USB Device Core. + * @param pdev: Device Handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_Stop(USBD_HandleTypeDef *pdev) +{ + /* Disconnect USB Device */ + (void)USBD_LL_Stop(pdev); + + /* Free Class Resources */ +#ifdef USE_USBD_COMPOSITE + /* Parse the table of classes in use */ + for (uint32_t i = 0U; i < USBD_MAX_SUPPORTED_CLASS; i++) + { + /* Check if current class is in use */ + if ((pdev->tclasslist[i].Active) == 1U) + { + if (pdev->pClass[i] != NULL) + { + pdev->classId = i; + /* Free Class Resources */ + (void)pdev->pClass[i]->DeInit(pdev, (uint8_t)pdev->dev_config); + } + } + } + + /* Reset the class ID */ + pdev->classId = 0U; +#else + if (pdev->pClass[0] != NULL) + { + (void)pdev->pClass[0]->DeInit(pdev, (uint8_t)pdev->dev_config); + } +#endif /* USE_USBD_COMPOSITE */ + + return USBD_OK; +} + +/** + * @brief USBD_RunTestMode + * Launch test mode process + * @param pdev: device instance + * @retval status + */ +USBD_StatusTypeDef USBD_RunTestMode(USBD_HandleTypeDef *pdev) +{ +#ifdef USBD_HS_TESTMODE_ENABLE + USBD_StatusTypeDef ret; + + /* Run USB HS test mode */ + ret = USBD_LL_SetTestMode(pdev, pdev->dev_test_mode); + + return ret; +#else + /* Prevent unused argument compilation warning */ + UNUSED(pdev); + + return USBD_OK; +#endif /* USBD_HS_TESTMODE_ENABLE */ +} + +/** + * @brief USBD_SetClassConfig + * Configure device and start the interface + * @param pdev: device instance + * @param cfgidx: configuration index + * @retval status + */ + +USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx) +{ + USBD_StatusTypeDef ret = USBD_OK; + +#ifdef USE_USBD_COMPOSITE + /* Parse the table of classes in use */ + for (uint32_t i = 0U; i < USBD_MAX_SUPPORTED_CLASS; i++) + { + /* Check if current class is in use */ + if ((pdev->tclasslist[i].Active) == 1U) + { + if (pdev->pClass[i] != NULL) + { + pdev->classId = i; + /* Set configuration and Start the Class*/ + if (pdev->pClass[i]->Init(pdev, cfgidx) != 0U) + { + ret = USBD_FAIL; + } + } + } + } +#else + if (pdev->pClass[0] != NULL) + { + /* Set configuration and Start the Class */ + ret = (USBD_StatusTypeDef)pdev->pClass[0]->Init(pdev, cfgidx); + } +#endif /* USE_USBD_COMPOSITE */ + + return ret; +} + +/** + * @brief USBD_ClrClassConfig + * Clear current configuration + * @param pdev: device instance + * @param cfgidx: configuration index + * @retval status: USBD_StatusTypeDef + */ +USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx) +{ + USBD_StatusTypeDef ret = USBD_OK; + +#ifdef USE_USBD_COMPOSITE + /* Parse the table of classes in use */ + for (uint32_t i = 0U; i < USBD_MAX_SUPPORTED_CLASS; i++) + { + /* Check if current class is in use */ + if ((pdev->tclasslist[i].Active) == 1U) + { + if (pdev->pClass[i] != NULL) + { + pdev->classId = i; + /* Clear configuration and De-initialize the Class process */ + if (pdev->pClass[i]->DeInit(pdev, cfgidx) != 0U) + { + ret = USBD_FAIL; + } + } + } + } +#else + /* Clear configuration and De-initialize the Class process */ + if (pdev->pClass[0]->DeInit(pdev, cfgidx) != 0U) + { + ret = USBD_FAIL; + } +#endif /* USE_USBD_COMPOSITE */ + + return ret; +} + + +/** + * @brief USBD_LL_SetupStage + * Handle the setup stage + * @param pdev: device instance + * @retval status + */ +USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup) +{ + USBD_StatusTypeDef ret; + + USBD_ParseSetupRequest(&pdev->request, psetup); + + pdev->ep0_state = USBD_EP0_SETUP; + + pdev->ep0_data_len = pdev->request.wLength; + + switch (pdev->request.bmRequest & 0x1FU) + { + case USB_REQ_RECIPIENT_DEVICE: + ret = USBD_StdDevReq(pdev, &pdev->request); + break; + + case USB_REQ_RECIPIENT_INTERFACE: + ret = USBD_StdItfReq(pdev, &pdev->request); + break; + + case USB_REQ_RECIPIENT_ENDPOINT: + ret = USBD_StdEPReq(pdev, &pdev->request); + break; + + default: + ret = USBD_LL_StallEP(pdev, (pdev->request.bmRequest & 0x80U)); + break; + } + + return ret; +} + +/** + * @brief USBD_LL_DataOutStage + * Handle data OUT stage + * @param pdev: device instance + * @param epnum: endpoint index + * @param pdata: data pointer + * @retval status + */ +USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev, + uint8_t epnum, uint8_t *pdata) +{ + USBD_EndpointTypeDef *pep; + USBD_StatusTypeDef ret = USBD_OK; + uint8_t idx; + + if (epnum == 0U) + { + pep = &pdev->ep_out[0]; + + if (pdev->ep0_state == USBD_EP0_DATA_OUT) + { + if (pep->rem_length > pep->maxpacket) + { + pep->rem_length -= pep->maxpacket; + + (void)USBD_CtlContinueRx(pdev, pdata, MIN(pep->rem_length, pep->maxpacket)); + } + else + { + /* Find the class ID relative to the current request */ + switch (pdev->request.bmRequest & 0x1FU) + { + case USB_REQ_RECIPIENT_DEVICE: + /* Device requests must be managed by the first instantiated class + (or duplicated by all classes for simplicity) */ + idx = 0U; + break; + + case USB_REQ_RECIPIENT_INTERFACE: + idx = USBD_CoreFindIF(pdev, LOBYTE(pdev->request.wIndex)); + break; + + case USB_REQ_RECIPIENT_ENDPOINT: + idx = USBD_CoreFindEP(pdev, LOBYTE(pdev->request.wIndex)); + break; + + default: + /* Back to the first class in case of doubt */ + idx = 0U; + break; + } + + if (idx < USBD_MAX_SUPPORTED_CLASS) + { + /* Setup the class ID and route the request to the relative class function */ + if (pdev->dev_state == USBD_STATE_CONFIGURED) + { + if (pdev->pClass[idx]->EP0_RxReady != NULL) + { + pdev->classId = idx; + pdev->pClass[idx]->EP0_RxReady(pdev); + } + } + } + + (void)USBD_CtlSendStatus(pdev); + } + } + else + { +#if 0 + if (pdev->ep0_state == USBD_EP0_STATUS_OUT) + { + /* + * STATUS PHASE completed, update ep0_state to idle + */ + pdev->ep0_state = USBD_EP0_IDLE; + (void)USBD_LL_StallEP(pdev, 0U); + } +#endif + } + } + else + { + /* Get the class index relative to this interface */ + idx = USBD_CoreFindEP(pdev, (epnum & 0x7FU)); + + if (((uint16_t)idx != 0xFFU) && (idx < USBD_MAX_SUPPORTED_CLASS)) + { + /* Call the class data out function to manage the request */ + if (pdev->dev_state == USBD_STATE_CONFIGURED) + { + if (pdev->pClass[idx]->DataOut != NULL) + { + pdev->classId = idx; + ret = (USBD_StatusTypeDef)pdev->pClass[idx]->DataOut(pdev, epnum); + } + } + if (ret != USBD_OK) + { + return ret; + } + } + } + + return USBD_OK; +} + +/** + * @brief USBD_LL_DataInStage + * Handle data in stage + * @param pdev: device instance + * @param epnum: endpoint index + * @retval status + */ +USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev, + uint8_t epnum, uint8_t *pdata) +{ + USBD_EndpointTypeDef *pep; + USBD_StatusTypeDef ret; + uint8_t idx; + + if (epnum == 0U) + { + pep = &pdev->ep_in[0]; + + if (pdev->ep0_state == USBD_EP0_DATA_IN) + { + if (pep->rem_length > pep->maxpacket) + { + pep->rem_length -= pep->maxpacket; + + (void)USBD_CtlContinueSendData(pdev, pdata, pep->rem_length); + + /* Prepare endpoint for premature end of transfer */ + (void)USBD_LL_PrepareReceive(pdev, 0U, NULL, 0U); + } + else + { + /* last packet is MPS multiple, so send ZLP packet */ + if ((pep->maxpacket == pep->rem_length) && + (pep->total_length >= pep->maxpacket) && + (pep->total_length < pdev->ep0_data_len)) + { + (void)USBD_CtlContinueSendData(pdev, NULL, 0U); + pdev->ep0_data_len = 0U; + + /* Prepare endpoint for premature end of transfer */ + (void)USBD_LL_PrepareReceive(pdev, 0U, NULL, 0U); + } + else + { + if (pdev->dev_state == USBD_STATE_CONFIGURED) + { + if (pdev->pClass[0]->EP0_TxSent != NULL) + { + pdev->classId = 0U; + pdev->pClass[0]->EP0_TxSent(pdev); + } + } + (void)USBD_LL_StallEP(pdev, 0x80U); + (void)USBD_CtlReceiveStatus(pdev); + } + } + } + else + { +#if 0 + if ((pdev->ep0_state == USBD_EP0_STATUS_IN) || + (pdev->ep0_state == USBD_EP0_IDLE)) + { + (void)USBD_LL_StallEP(pdev, 0x80U); + } +#endif + } + + if (pdev->dev_test_mode != 0U) + { + (void)USBD_RunTestMode(pdev); + pdev->dev_test_mode = 0U; + } + } + else + { + /* Get the class index relative to this interface */ + idx = USBD_CoreFindEP(pdev, ((uint8_t)epnum | 0x80U)); + + if (((uint16_t)idx != 0xFFU) && (idx < USBD_MAX_SUPPORTED_CLASS)) + { + /* Call the class data out function to manage the request */ + if (pdev->dev_state == USBD_STATE_CONFIGURED) + { + if (pdev->pClass[idx]->DataIn != NULL) + { + pdev->classId = idx; + ret = (USBD_StatusTypeDef)pdev->pClass[idx]->DataIn(pdev, epnum); + + if (ret != USBD_OK) + { + return ret; + } + } + } + } + } + + return USBD_OK; +} + +/** + * @brief USBD_LL_Reset + * Handle Reset event + * @param pdev: device instance + * @retval status + */ + +USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev) +{ + USBD_StatusTypeDef ret = USBD_OK; + + /* Upon Reset call user call back */ + pdev->dev_state = USBD_STATE_DEFAULT; + pdev->ep0_state = USBD_EP0_IDLE; + pdev->dev_config = 0U; + pdev->dev_remote_wakeup = 0U; + pdev->dev_test_mode = 0U; + +#ifdef USE_USBD_COMPOSITE + /* Parse the table of classes in use */ + for (uint32_t i = 0U; i < USBD_MAX_SUPPORTED_CLASS; i++) + { + /* Check if current class is in use */ + if ((pdev->tclasslist[i].Active) == 1U) + { + if (pdev->pClass[i] != NULL) + { + pdev->classId = i; + /* Clear configuration and De-initialize the Class process*/ + + if (pdev->pClass[i]->DeInit != NULL) + { + if (pdev->pClass[i]->DeInit(pdev, (uint8_t)pdev->dev_config) != USBD_OK) + { + ret = USBD_FAIL; + } + } + } + } + } +#else + + if (pdev->pClass[0] != NULL) + { + if (pdev->pClass[0]->DeInit != NULL) + { + if (pdev->pClass[0]->DeInit(pdev, (uint8_t)pdev->dev_config) != USBD_OK) + { + ret = USBD_FAIL; + } + } + } +#endif /* USE_USBD_COMPOSITE */ + + /* Open EP0 OUT */ + (void)USBD_LL_OpenEP(pdev, 0x00U, USBD_EP_TYPE_CTRL, USB_MAX_EP0_SIZE); + pdev->ep_out[0x00U & 0xFU].is_used = 1U; + + pdev->ep_out[0].maxpacket = USB_MAX_EP0_SIZE; + + /* Open EP0 IN */ + (void)USBD_LL_OpenEP(pdev, 0x80U, USBD_EP_TYPE_CTRL, USB_MAX_EP0_SIZE); + pdev->ep_in[0x80U & 0xFU].is_used = 1U; + + pdev->ep_in[0].maxpacket = USB_MAX_EP0_SIZE; + + return ret; +} + +/** + * @brief USBD_LL_SetSpeed + * Handle Reset event + * @param pdev: device instance + * @retval status + */ +USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, + USBD_SpeedTypeDef speed) +{ + pdev->dev_speed = speed; + + return USBD_OK; +} + +/** + * @brief USBD_LL_Suspend + * Handle Suspend event + * @param pdev: device instance + * @retval status + */ + +USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev) +{ + pdev->dev_old_state = pdev->dev_state; + pdev->dev_state = USBD_STATE_SUSPENDED; + + return USBD_OK; +} + +/** + * @brief USBD_LL_Resume + * Handle Resume event + * @param pdev: device instance + * @retval status + */ + +USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev) +{ + if (pdev->dev_state == USBD_STATE_SUSPENDED) + { + pdev->dev_state = pdev->dev_old_state; + } + + return USBD_OK; +} + +/** + * @brief USBD_LL_SOF + * Handle SOF event + * @param pdev: device instance + * @retval status + */ + +USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev) +{ + /* The SOF event can be distributed for all classes that support it */ + if (pdev->dev_state == USBD_STATE_CONFIGURED) + { +#ifdef USE_USBD_COMPOSITE + /* Parse the table of classes in use */ + for (uint32_t i = 0; i < USBD_MAX_SUPPORTED_CLASS; i++) + { + /* Check if current class is in use */ + if ((pdev->tclasslist[i].Active) == 1U) + { + if (pdev->pClass[i] != NULL) + { + if (pdev->pClass[i]->SOF != NULL) + { + pdev->classId = i; + (void)pdev->pClass[i]->SOF(pdev); + } + } + } + } +#else + if (pdev->pClass[0] != NULL) + { + if (pdev->pClass[0]->SOF != NULL) + { + (void)pdev->pClass[0]->SOF(pdev); + } + } +#endif /* USE_USBD_COMPOSITE */ + } + + return USBD_OK; +} + +/** + * @brief USBD_LL_IsoINIncomplete + * Handle iso in incomplete event + * @param pdev: device instance + * @retval status + */ +USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, + uint8_t epnum) +{ + if (pdev->pClass[pdev->classId] == NULL) + { + return USBD_FAIL; + } + + if (pdev->dev_state == USBD_STATE_CONFIGURED) + { + if (pdev->pClass[pdev->classId]->IsoINIncomplete != NULL) + { + (void)pdev->pClass[pdev->classId]->IsoINIncomplete(pdev, epnum); + } + } + + return USBD_OK; +} + +/** + * @brief USBD_LL_IsoOUTIncomplete + * Handle iso out incomplete event + * @param pdev: device instance + * @retval status + */ +USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, + uint8_t epnum) +{ + if (pdev->pClass[pdev->classId] == NULL) + { + return USBD_FAIL; + } + + if (pdev->dev_state == USBD_STATE_CONFIGURED) + { + if (pdev->pClass[pdev->classId]->IsoOUTIncomplete != NULL) + { + (void)pdev->pClass[pdev->classId]->IsoOUTIncomplete(pdev, epnum); + } + } + + return USBD_OK; +} + +/** + * @brief USBD_LL_DevConnected + * Handle device connection event + * @param pdev: device instance + * @retval status + */ +USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev) +{ + /* Prevent unused argument compilation warning */ + UNUSED(pdev); + + return USBD_OK; +} + +/** + * @brief USBD_LL_DevDisconnected + * Handle device disconnection event + * @param pdev: device instance + * @retval status + */ +USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev) +{ + USBD_StatusTypeDef ret = USBD_OK; + + /* Free Class Resources */ + pdev->dev_state = USBD_STATE_DEFAULT; + +#ifdef USE_USBD_COMPOSITE + /* Parse the table of classes in use */ + for (uint32_t i = 0; i < USBD_MAX_SUPPORTED_CLASS; i++) + { + /* Check if current class is in use */ + if ((pdev->tclasslist[i].Active) == 1U) + { + if (pdev->pClass[i] != NULL) + { + pdev->classId = i; + /* Clear configuration and De-initialize the Class process*/ + if (pdev->pClass[i]->DeInit(pdev, (uint8_t)pdev->dev_config) != 0U) + { + ret = USBD_FAIL; + } + } + } + } +#else + if (pdev->pClass[0] != NULL) + { + if (pdev->pClass[0]->DeInit(pdev, (uint8_t)pdev->dev_config) != 0U) + { + ret = USBD_FAIL; + } + } +#endif /* USE_USBD_COMPOSITE */ + + return ret; +} + +/** + * @brief USBD_CoreFindIF + * return the class index relative to the selected interface + * @param pdev: device instance + * @param index : selected interface number + * @retval index of the class using the selected interface number. OxFF if no class found. + */ +uint8_t USBD_CoreFindIF(USBD_HandleTypeDef *pdev, uint8_t index) +{ +#ifdef USE_USBD_COMPOSITE + /* Parse the table of classes in use */ + for (uint32_t i = 0U; i < USBD_MAX_SUPPORTED_CLASS; i++) + { + /* Check if current class is in use */ + if ((pdev->tclasslist[i].Active) == 1U) + { + /* Parse all interfaces listed in the current class */ + for (uint32_t j = 0U; j < pdev->tclasslist[i].NumIf; j++) + { + /* Check if requested Interface matches the current class interface */ + if (pdev->tclasslist[i].Ifs[j] == index) + { + if (pdev->pClass[i]->Setup != NULL) + { + return (uint8_t)i; + } + } + } + } + } + + return 0xFFU; +#else + UNUSED(pdev); + UNUSED(index); + + return 0x00U; +#endif /* USE_USBD_COMPOSITE */ +} + +/** + * @brief USBD_CoreFindEP + * return the class index relative to the selected endpoint + * @param pdev: device instance + * @param index : selected endpoint number + * @retval index of the class using the selected endpoint number. 0xFF if no class found. + */ +uint8_t USBD_CoreFindEP(USBD_HandleTypeDef *pdev, uint8_t index) +{ +#ifdef USE_USBD_COMPOSITE + /* Parse the table of classes in use */ + for (uint32_t i = 0U; i < USBD_MAX_SUPPORTED_CLASS; i++) + { + /* Check if current class is in use */ + if ((pdev->tclasslist[i].Active) == 1U) + { + /* Parse all endpoints listed in the current class */ + for (uint32_t j = 0U; j < pdev->tclasslist[i].NumEps; j++) + { + /* Check if requested endpoint matches the current class endpoint */ + if (pdev->tclasslist[i].Eps[j].add == index) + { + if (pdev->pClass[i]->Setup != NULL) + { + return (uint8_t)i; + } + } + } + } + } + + return 0xFFU; +#else + UNUSED(pdev); + UNUSED(index); + + return 0x00U; +#endif /* USE_USBD_COMPOSITE */ +} + +#ifdef USE_USBD_COMPOSITE +/** + * @brief USBD_CoreGetEPAdd + * Get the endpoint address relative to a selected class + * @param pdev: device instance + * @param ep_dir: USBD_EP_IN or USBD_EP_OUT + * @param ep_type: USBD_EP_TYPE_CTRL, USBD_EP_TYPE_ISOC, USBD_EP_TYPE_BULK or USBD_EP_TYPE_INTR + * @param ClassId: The Class ID + * @retval Address of the selected endpoint or 0xFFU if no endpoint found. + */ +uint8_t USBD_CoreGetEPAdd(USBD_HandleTypeDef *pdev, uint8_t ep_dir, uint8_t ep_type, uint8_t ClassId) +{ + uint8_t idx; + + /* Find the EP address in the selected class table */ + for (idx = 0; idx < pdev->tclasslist[ClassId].NumEps; idx++) + { + if (((pdev->tclasslist[ClassId].Eps[idx].add & USBD_EP_IN) == ep_dir) && \ + (pdev->tclasslist[ClassId].Eps[idx].type == ep_type) && \ + (pdev->tclasslist[ClassId].Eps[idx].is_used != 0U)) + { + return (pdev->tclasslist[ClassId].Eps[idx].add); + } + } + + /* If reaching this point, then no endpoint was found */ + return 0xFFU; +} +#endif /* USE_USBD_COMPOSITE */ + +/** + * @brief USBD_GetEpDesc + * This function return the Endpoint descriptor + * @param pdev: device instance + * @param pConfDesc: pointer to Bos descriptor + * @param EpAddr: endpoint address + * @retval pointer to video endpoint descriptor + */ +void *USBD_GetEpDesc(uint8_t *pConfDesc, uint8_t EpAddr) +{ + USBD_DescHeaderTypeDef *pdesc = (USBD_DescHeaderTypeDef *)(void *)pConfDesc; + USBD_ConfigDescTypeDef *desc = (USBD_ConfigDescTypeDef *)(void *)pConfDesc; + USBD_EpDescTypeDef *pEpDesc = NULL; + uint16_t ptr; + + if (desc->wTotalLength > desc->bLength) + { + ptr = desc->bLength; + + while (ptr < desc->wTotalLength) + { + pdesc = USBD_GetNextDesc((uint8_t *)pdesc, &ptr); + + if (pdesc->bDescriptorType == USB_DESC_TYPE_ENDPOINT) + { + pEpDesc = (USBD_EpDescTypeDef *)(void *)pdesc; + + if (pEpDesc->bEndpointAddress == EpAddr) + { + break; + } + else + { + pEpDesc = NULL; + } + } + } + } + + return (void *)pEpDesc; +} + +/** + * @brief USBD_GetNextDesc + * This function return the next descriptor header + * @param buf: Buffer where the descriptor is available + * @param ptr: data pointer inside the descriptor + * @retval next header + */ +USBD_DescHeaderTypeDef *USBD_GetNextDesc(uint8_t *pbuf, uint16_t *ptr) +{ + USBD_DescHeaderTypeDef *pnext = (USBD_DescHeaderTypeDef *)(void *)pbuf; + + *ptr += pnext->bLength; + pnext = (USBD_DescHeaderTypeDef *)(void *)(pbuf + pnext->bLength); + + return (pnext); +} + +/** + * @} + */ + + +/** + * @} + */ + + +/** + * @} + */ + diff --git a/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c b/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c new file mode 100644 index 0000000..899bc70 --- /dev/null +++ b/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c @@ -0,0 +1,1051 @@ +/** + ****************************************************************************** + * @file usbd_req.c + * @author MCD Application Team + * @brief This file provides the standard USB requests following chapter 9. + ****************************************************************************** + * @attention + * + * Copyright (c) 2015 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_ctlreq.h" +#include "usbd_ioreq.h" + +#ifdef USE_USBD_COMPOSITE +#include "usbd_composite_builder.h" +#endif /* USE_USBD_COMPOSITE */ + +/** @addtogroup STM32_USBD_STATE_DEVICE_LIBRARY + * @{ + */ + + +/** @defgroup USBD_REQ + * @brief USB standard requests module + * @{ + */ + +/** @defgroup USBD_REQ_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_Defines + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_Macros + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_Variables + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_FunctionPrototypes + * @{ + */ +static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); +static void USBD_SetAddress(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); +static USBD_StatusTypeDef USBD_SetConfig(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); +static void USBD_GetConfig(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); +static void USBD_GetStatus(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); +static void USBD_SetFeature(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); +static void USBD_ClrFeature(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); +static uint8_t USBD_GetLen(uint8_t *buf); + +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_Functions + * @{ + */ + + +/** + * @brief USBD_StdDevReq + * Handle standard usb device requests + * @param pdev: device instance + * @param req: usb request + * @retval status + */ +USBD_StatusTypeDef USBD_StdDevReq(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req) +{ + USBD_StatusTypeDef ret = USBD_OK; + + switch (req->bmRequest & USB_REQ_TYPE_MASK) + { + case USB_REQ_TYPE_CLASS: + case USB_REQ_TYPE_VENDOR: + ret = (USBD_StatusTypeDef)pdev->pClass[pdev->classId]->Setup(pdev, req); + break; + + case USB_REQ_TYPE_STANDARD: + switch (req->bRequest) + { + case USB_REQ_GET_DESCRIPTOR: + USBD_GetDescriptor(pdev, req); + break; + + case USB_REQ_SET_ADDRESS: + USBD_SetAddress(pdev, req); + break; + + case USB_REQ_SET_CONFIGURATION: + ret = USBD_SetConfig(pdev, req); + break; + + case USB_REQ_GET_CONFIGURATION: + USBD_GetConfig(pdev, req); + break; + + case USB_REQ_GET_STATUS: + USBD_GetStatus(pdev, req); + break; + + case USB_REQ_SET_FEATURE: + USBD_SetFeature(pdev, req); + break; + + case USB_REQ_CLEAR_FEATURE: + USBD_ClrFeature(pdev, req); + break; + + default: + USBD_CtlError(pdev, req); + break; + } + break; + + default: + USBD_CtlError(pdev, req); + break; + } + + return ret; +} + +/** + * @brief USBD_StdItfReq + * Handle standard usb interface requests + * @param pdev: device instance + * @param req: usb request + * @retval status + */ +USBD_StatusTypeDef USBD_StdItfReq(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req) +{ + USBD_StatusTypeDef ret = USBD_OK; + uint8_t idx; + + switch (req->bmRequest & USB_REQ_TYPE_MASK) + { + case USB_REQ_TYPE_CLASS: + case USB_REQ_TYPE_VENDOR: + case USB_REQ_TYPE_STANDARD: + switch (pdev->dev_state) + { + case USBD_STATE_DEFAULT: + case USBD_STATE_ADDRESSED: + case USBD_STATE_CONFIGURED: + + if (LOBYTE(req->wIndex) <= USBD_MAX_NUM_INTERFACES) + { + /* Get the class index relative to this interface */ + idx = USBD_CoreFindIF(pdev, LOBYTE(req->wIndex)); + if (((uint8_t)idx != 0xFFU) && (idx < USBD_MAX_SUPPORTED_CLASS)) + { + /* Call the class data out function to manage the request */ + if (pdev->pClass[idx]->Setup != NULL) + { + pdev->classId = idx; + ret = (USBD_StatusTypeDef)(pdev->pClass[idx]->Setup(pdev, req)); + } + else + { + /* should never reach this condition */ + ret = USBD_FAIL; + } + } + else + { + /* No relative interface found */ + ret = USBD_FAIL; + } + + if ((req->wLength == 0U) && (ret == USBD_OK)) + { + (void)USBD_CtlSendStatus(pdev); + } + } + else + { + USBD_CtlError(pdev, req); + } + break; + + default: + USBD_CtlError(pdev, req); + break; + } + break; + + default: + USBD_CtlError(pdev, req); + break; + } + + return ret; +} + +/** + * @brief USBD_StdEPReq + * Handle standard usb endpoint requests + * @param pdev: device instance + * @param req: usb request + * @retval status + */ +USBD_StatusTypeDef USBD_StdEPReq(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req) +{ + USBD_EndpointTypeDef *pep; + uint8_t ep_addr; + uint8_t idx; + USBD_StatusTypeDef ret = USBD_OK; + + ep_addr = LOBYTE(req->wIndex); + + switch (req->bmRequest & USB_REQ_TYPE_MASK) + { + case USB_REQ_TYPE_CLASS: + case USB_REQ_TYPE_VENDOR: + /* Get the class index relative to this endpoint */ + idx = USBD_CoreFindEP(pdev, ep_addr); + if (((uint8_t)idx != 0xFFU) && (idx < USBD_MAX_SUPPORTED_CLASS)) + { + pdev->classId = idx; + /* Call the class data out function to manage the request */ + if (pdev->pClass[idx]->Setup != NULL) + { + ret = (USBD_StatusTypeDef)pdev->pClass[idx]->Setup(pdev, req); + } + } + break; + + case USB_REQ_TYPE_STANDARD: + switch (req->bRequest) + { + case USB_REQ_SET_FEATURE: + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + if ((ep_addr != 0x00U) && (ep_addr != 0x80U)) + { + (void)USBD_LL_StallEP(pdev, ep_addr); + (void)USBD_LL_StallEP(pdev, 0x80U); + } + else + { + USBD_CtlError(pdev, req); + } + break; + + case USBD_STATE_CONFIGURED: + if (req->wValue == USB_FEATURE_EP_HALT) + { + if ((ep_addr != 0x00U) && (ep_addr != 0x80U) && (req->wLength == 0x00U)) + { + (void)USBD_LL_StallEP(pdev, ep_addr); + } + } + (void)USBD_CtlSendStatus(pdev); + + break; + + default: + USBD_CtlError(pdev, req); + break; + } + break; + + case USB_REQ_CLEAR_FEATURE: + + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + if ((ep_addr != 0x00U) && (ep_addr != 0x80U)) + { + (void)USBD_LL_StallEP(pdev, ep_addr); + (void)USBD_LL_StallEP(pdev, 0x80U); + } + else + { + USBD_CtlError(pdev, req); + } + break; + + case USBD_STATE_CONFIGURED: + if (req->wValue == USB_FEATURE_EP_HALT) + { + if ((ep_addr & 0x7FU) != 0x00U) + { + (void)USBD_LL_ClearStallEP(pdev, ep_addr); + } + (void)USBD_CtlSendStatus(pdev); + + /* Get the class index relative to this interface */ + idx = USBD_CoreFindEP(pdev, ep_addr); + if (((uint8_t)idx != 0xFFU) && (idx < USBD_MAX_SUPPORTED_CLASS)) + { + pdev->classId = idx; + /* Call the class data out function to manage the request */ + if (pdev->pClass[idx]->Setup != NULL) + { + ret = (USBD_StatusTypeDef)(pdev->pClass[idx]->Setup(pdev, req)); + } + } + } + break; + + default: + USBD_CtlError(pdev, req); + break; + } + break; + + case USB_REQ_GET_STATUS: + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + if ((ep_addr != 0x00U) && (ep_addr != 0x80U)) + { + USBD_CtlError(pdev, req); + break; + } + pep = ((ep_addr & 0x80U) == 0x80U) ? &pdev->ep_in[ep_addr & 0x7FU] : \ + &pdev->ep_out[ep_addr & 0x7FU]; + + pep->status = 0x0000U; + + (void)USBD_CtlSendData(pdev, (uint8_t *)&pep->status, 2U); + break; + + case USBD_STATE_CONFIGURED: + if ((ep_addr & 0x80U) == 0x80U) + { + if (pdev->ep_in[ep_addr & 0xFU].is_used == 0U) + { + USBD_CtlError(pdev, req); + break; + } + } + else + { + if (pdev->ep_out[ep_addr & 0xFU].is_used == 0U) + { + USBD_CtlError(pdev, req); + break; + } + } + + pep = ((ep_addr & 0x80U) == 0x80U) ? &pdev->ep_in[ep_addr & 0x7FU] : \ + &pdev->ep_out[ep_addr & 0x7FU]; + + if ((ep_addr == 0x00U) || (ep_addr == 0x80U)) + { + pep->status = 0x0000U; + } + else if (USBD_LL_IsStallEP(pdev, ep_addr) != 0U) + { + pep->status = 0x0001U; + } + else + { + pep->status = 0x0000U; + } + + (void)USBD_CtlSendData(pdev, (uint8_t *)&pep->status, 2U); + break; + + default: + USBD_CtlError(pdev, req); + break; + } + break; + + default: + USBD_CtlError(pdev, req); + break; + } + break; + + default: + USBD_CtlError(pdev, req); + break; + } + + return ret; +} + + +/** + * @brief USBD_GetDescriptor + * Handle Get Descriptor requests + * @param pdev: device instance + * @param req: usb request + * @retval status + */ +static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req) +{ + uint16_t len = 0U; + uint8_t *pbuf = NULL; + uint8_t err = 0U; + + switch (req->wValue >> 8) + { +#if ((USBD_LPM_ENABLED == 1U) || (USBD_CLASS_BOS_ENABLED == 1U)) + case USB_DESC_TYPE_BOS: + if (pdev->pDesc->GetBOSDescriptor != NULL) + { + pbuf = pdev->pDesc->GetBOSDescriptor(pdev->dev_speed, &len); + } + else + { + USBD_CtlError(pdev, req); + err++; + } + break; +#endif /* (USBD_LPM_ENABLED == 1U) || (USBD_CLASS_BOS_ENABLED == 1U) */ + case USB_DESC_TYPE_DEVICE: + pbuf = pdev->pDesc->GetDeviceDescriptor(pdev->dev_speed, &len); + break; + + case USB_DESC_TYPE_CONFIGURATION: + if (pdev->dev_speed == USBD_SPEED_HIGH) + { +#ifdef USE_USBD_COMPOSITE + if ((uint8_t)(pdev->NumClasses) > 0U) + { + pbuf = (uint8_t *)USBD_CMPSIT.GetHSConfigDescriptor(&len); + } + else +#endif /* USE_USBD_COMPOSITE */ + { + pbuf = (uint8_t *)pdev->pClass[0]->GetHSConfigDescriptor(&len); + } + pbuf[1] = USB_DESC_TYPE_CONFIGURATION; + } + else + { +#ifdef USE_USBD_COMPOSITE + if ((uint8_t)(pdev->NumClasses) > 0U) + { + pbuf = (uint8_t *)USBD_CMPSIT.GetFSConfigDescriptor(&len); + } + else +#endif /* USE_USBD_COMPOSITE */ + { + pbuf = (uint8_t *)pdev->pClass[0]->GetFSConfigDescriptor(&len); + } + pbuf[1] = USB_DESC_TYPE_CONFIGURATION; + } + break; + + case USB_DESC_TYPE_STRING: + switch ((uint8_t)(req->wValue)) + { + case USBD_IDX_LANGID_STR: + if (pdev->pDesc->GetLangIDStrDescriptor != NULL) + { + pbuf = pdev->pDesc->GetLangIDStrDescriptor(pdev->dev_speed, &len); + } + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + + case USBD_IDX_MFC_STR: + if (pdev->pDesc->GetManufacturerStrDescriptor != NULL) + { + pbuf = pdev->pDesc->GetManufacturerStrDescriptor(pdev->dev_speed, &len); + } + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + + case USBD_IDX_PRODUCT_STR: + if (pdev->pDesc->GetProductStrDescriptor != NULL) + { + pbuf = pdev->pDesc->GetProductStrDescriptor(pdev->dev_speed, &len); + } + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + + case USBD_IDX_SERIAL_STR: + if (pdev->pDesc->GetSerialStrDescriptor != NULL) + { + pbuf = pdev->pDesc->GetSerialStrDescriptor(pdev->dev_speed, &len); + } + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + + case USBD_IDX_CONFIG_STR: + if (pdev->pDesc->GetConfigurationStrDescriptor != NULL) + { + pbuf = pdev->pDesc->GetConfigurationStrDescriptor(pdev->dev_speed, &len); + } + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + + case USBD_IDX_INTERFACE_STR: + if (pdev->pDesc->GetInterfaceStrDescriptor != NULL) + { + pbuf = pdev->pDesc->GetInterfaceStrDescriptor(pdev->dev_speed, &len); + } + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + + default: +#if (USBD_SUPPORT_USER_STRING_DESC == 1U) + pbuf = NULL; + + + for (uint32_t idx = 0U; (idx < pdev->NumClasses); idx++) + { + if (pdev->pClass[idx]->GetUsrStrDescriptor != NULL) + { + pdev->classId = idx; + pbuf = pdev->pClass[idx]->GetUsrStrDescriptor(pdev, LOBYTE(req->wValue), &len); + + if (pbuf == NULL) /* This means that no class recognized the string index */ + { + continue; + } + else + { + break; + } + } + } + +#endif /* USBD_SUPPORT_USER_STRING_DESC */ + +#if (USBD_CLASS_USER_STRING_DESC == 1U) + if (pdev->pDesc->GetUserStrDescriptor != NULL) + { + pbuf = pdev->pDesc->GetUserStrDescriptor(pdev->dev_speed, (req->wValue), &len); + } + else + { + USBD_CtlError(pdev, req); + err++; + } +#endif /* USBD_SUPPORT_USER_STRING_DESC */ + +#if ((USBD_CLASS_USER_STRING_DESC == 0U) && (USBD_SUPPORT_USER_STRING_DESC == 0U)) + USBD_CtlError(pdev, req); + err++; +#endif /* (USBD_CLASS_USER_STRING_DESC == 0U) && (USBD_SUPPORT_USER_STRING_DESC == 0U) */ + break; + } + break; + + case USB_DESC_TYPE_DEVICE_QUALIFIER: + if (pdev->dev_speed == USBD_SPEED_HIGH) + { +#ifdef USE_USBD_COMPOSITE + if ((uint8_t)(pdev->NumClasses) > 0U) + { + pbuf = (uint8_t *)USBD_CMPSIT.GetDeviceQualifierDescriptor(&len); + } + else +#endif /* USE_USBD_COMPOSITE */ + { + pbuf = (uint8_t *)pdev->pClass[0]->GetDeviceQualifierDescriptor(&len); + } + } + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + + case USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION: + if (pdev->dev_speed == USBD_SPEED_HIGH) + { +#ifdef USE_USBD_COMPOSITE + if ((uint8_t)(pdev->NumClasses) > 0U) + { + pbuf = (uint8_t *)USBD_CMPSIT.GetOtherSpeedConfigDescriptor(&len); + } + else +#endif /* USE_USBD_COMPOSITE */ + { + pbuf = (uint8_t *)pdev->pClass[0]->GetOtherSpeedConfigDescriptor(&len); + } + pbuf[1] = USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION; + } + else + { + USBD_CtlError(pdev, req); + err++; + } + break; + + default: + USBD_CtlError(pdev, req); + err++; + break; + } + + if (err != 0U) + { + return; + } + + if (req->wLength != 0U) + { + if (len != 0U) + { + len = MIN(len, req->wLength); + (void)USBD_CtlSendData(pdev, pbuf, len); + } + else + { + USBD_CtlError(pdev, req); + } + } + else + { + (void)USBD_CtlSendStatus(pdev); + } +} + + +/** + * @brief USBD_SetAddress + * Set device address + * @param pdev: device instance + * @param req: usb request + * @retval status + */ +static void USBD_SetAddress(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req) +{ + uint8_t dev_addr; + + if ((req->wIndex == 0U) && (req->wLength == 0U) && (req->wValue < 128U)) + { + dev_addr = (uint8_t)(req->wValue) & 0x7FU; + + if (pdev->dev_state == USBD_STATE_CONFIGURED) + { + USBD_CtlError(pdev, req); + } + else + { + pdev->dev_address = dev_addr; + (void)USBD_LL_SetUSBAddress(pdev, dev_addr); + (void)USBD_CtlSendStatus(pdev); + + if (dev_addr != 0U) + { + pdev->dev_state = USBD_STATE_ADDRESSED; + } + else + { + pdev->dev_state = USBD_STATE_DEFAULT; + } + } + } + else + { + USBD_CtlError(pdev, req); + } +} + +/** + * @brief USBD_SetConfig + * Handle Set device configuration request + * @param pdev: device instance + * @param req: usb request + * @retval status + */ +static USBD_StatusTypeDef USBD_SetConfig(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req) +{ + USBD_StatusTypeDef ret = USBD_OK; + static uint8_t cfgidx; + + cfgidx = (uint8_t)(req->wValue); + + if (cfgidx > USBD_MAX_NUM_CONFIGURATION) + { + USBD_CtlError(pdev, req); + return USBD_FAIL; + } + + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + if (cfgidx != 0U) + { + pdev->dev_config = cfgidx; + + ret = USBD_SetClassConfig(pdev, cfgidx); + + if (ret != USBD_OK) + { + USBD_CtlError(pdev, req); + pdev->dev_state = USBD_STATE_ADDRESSED; + } + else + { + (void)USBD_CtlSendStatus(pdev); + pdev->dev_state = USBD_STATE_CONFIGURED; + } + } + else + { + (void)USBD_CtlSendStatus(pdev); + } + break; + + case USBD_STATE_CONFIGURED: + if (cfgidx == 0U) + { + pdev->dev_state = USBD_STATE_ADDRESSED; + pdev->dev_config = cfgidx; + (void)USBD_ClrClassConfig(pdev, cfgidx); + (void)USBD_CtlSendStatus(pdev); + } + else if (cfgidx != pdev->dev_config) + { + /* Clear old configuration */ + (void)USBD_ClrClassConfig(pdev, (uint8_t)pdev->dev_config); + + /* set new configuration */ + pdev->dev_config = cfgidx; + + ret = USBD_SetClassConfig(pdev, cfgidx); + + if (ret != USBD_OK) + { + USBD_CtlError(pdev, req); + (void)USBD_ClrClassConfig(pdev, (uint8_t)pdev->dev_config); + pdev->dev_state = USBD_STATE_ADDRESSED; + } + else + { + (void)USBD_CtlSendStatus(pdev); + } + } + else + { + (void)USBD_CtlSendStatus(pdev); + } + break; + + default: + USBD_CtlError(pdev, req); + (void)USBD_ClrClassConfig(pdev, cfgidx); + ret = USBD_FAIL; + break; + } + + return ret; +} + +/** + * @brief USBD_GetConfig + * Handle Get device configuration request + * @param pdev: device instance + * @param req: usb request + * @retval status + */ +static void USBD_GetConfig(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req) +{ + if (req->wLength != 1U) + { + USBD_CtlError(pdev, req); + } + else + { + switch (pdev->dev_state) + { + case USBD_STATE_DEFAULT: + case USBD_STATE_ADDRESSED: + pdev->dev_default_config = 0U; + (void)USBD_CtlSendData(pdev, (uint8_t *)&pdev->dev_default_config, 1U); + break; + + case USBD_STATE_CONFIGURED: + (void)USBD_CtlSendData(pdev, (uint8_t *)&pdev->dev_config, 1U); + break; + + default: + USBD_CtlError(pdev, req); + break; + } + } +} + +/** + * @brief USBD_GetStatus + * Handle Get Status request + * @param pdev: device instance + * @param req: usb request + * @retval status + */ +static void USBD_GetStatus(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req) +{ + switch (pdev->dev_state) + { + case USBD_STATE_DEFAULT: + case USBD_STATE_ADDRESSED: + case USBD_STATE_CONFIGURED: + if (req->wLength != 0x2U) + { + USBD_CtlError(pdev, req); + break; + } + +#if (USBD_SELF_POWERED == 1U) + pdev->dev_config_status = USB_CONFIG_SELF_POWERED; +#else + pdev->dev_config_status = 0U; +#endif /* USBD_SELF_POWERED */ + + if (pdev->dev_remote_wakeup != 0U) + { + pdev->dev_config_status |= USB_CONFIG_REMOTE_WAKEUP; + } + + (void)USBD_CtlSendData(pdev, (uint8_t *)&pdev->dev_config_status, 2U); + break; + + default: + USBD_CtlError(pdev, req); + break; + } +} + + +/** + * @brief USBD_SetFeature + * Handle Set device feature request + * @param pdev: device instance + * @param req: usb request + * @retval status + */ +static void USBD_SetFeature(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req) +{ + if (req->wValue == USB_FEATURE_REMOTE_WAKEUP) + { + pdev->dev_remote_wakeup = 1U; + (void)USBD_CtlSendStatus(pdev); + } + else if (req->wValue == USB_FEATURE_TEST_MODE) + { + pdev->dev_test_mode = (uint8_t)(req->wIndex >> 8); + (void)USBD_CtlSendStatus(pdev); + } + else + { + USBD_CtlError(pdev, req); + } +} + + +/** + * @brief USBD_ClrFeature + * Handle clear device feature request + * @param pdev: device instance + * @param req: usb request + * @retval status + */ +static void USBD_ClrFeature(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req) +{ + switch (pdev->dev_state) + { + case USBD_STATE_DEFAULT: + case USBD_STATE_ADDRESSED: + case USBD_STATE_CONFIGURED: + if (req->wValue == USB_FEATURE_REMOTE_WAKEUP) + { + pdev->dev_remote_wakeup = 0U; + (void)USBD_CtlSendStatus(pdev); + } + break; + + default: + USBD_CtlError(pdev, req); + break; + } +} + + +/** + * @brief USBD_ParseSetupRequest + * Copy buffer into setup structure + * @param pdev: device instance + * @param req: usb request + * @retval None + */ +void USBD_ParseSetupRequest(USBD_SetupReqTypedef *req, uint8_t *pdata) +{ + uint8_t *pbuff = pdata; + + req->bmRequest = *(uint8_t *)(pbuff); + + pbuff++; + req->bRequest = *(uint8_t *)(pbuff); + + pbuff++; + req->wValue = SWAPBYTE(pbuff); + + pbuff++; + pbuff++; + req->wIndex = SWAPBYTE(pbuff); + + pbuff++; + pbuff++; + req->wLength = SWAPBYTE(pbuff); +} + + +/** + * @brief USBD_CtlError + * Handle USB low level Error + * @param pdev: device instance + * @param req: usb request + * @retval None + */ +void USBD_CtlError(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req) +{ + UNUSED(req); + + (void)USBD_LL_StallEP(pdev, 0x80U); + (void)USBD_LL_StallEP(pdev, 0U); +} + + +/** + * @brief USBD_GetString + * Convert Ascii string into unicode one + * @param desc : descriptor buffer + * @param unicode : Formatted string buffer (unicode) + * @param len : descriptor length + * @retval None + */ +void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len) +{ + uint8_t idx = 0U; + uint8_t *pdesc; + + if (desc == NULL) + { + return; + } + + pdesc = desc; + *len = ((uint16_t)USBD_GetLen(pdesc) * 2U) + 2U; + + unicode[idx] = *(uint8_t *)len; + idx++; + unicode[idx] = USB_DESC_TYPE_STRING; + idx++; + + while (*pdesc != (uint8_t)'\0') + { + unicode[idx] = *pdesc; + pdesc++; + idx++; + + unicode[idx] = 0U; + idx++; + } +} + + +/** + * @brief USBD_GetLen + * return the string length + * @param buf : pointer to the ascii string buffer + * @retval string length + */ +static uint8_t USBD_GetLen(uint8_t *buf) +{ + uint8_t len = 0U; + uint8_t *pbuff = buf; + + while (*pbuff != (uint8_t)'\0') + { + len++; + pbuff++; + } + + return len; +} +/** + * @} + */ + + +/** + * @} + */ + + +/** + * @} + */ + diff --git a/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c b/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c new file mode 100644 index 0000000..7c8004a --- /dev/null +++ b/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c @@ -0,0 +1,224 @@ +/** + ****************************************************************************** + * @file usbd_ioreq.c + * @author MCD Application Team + * @brief This file provides the IO requests APIs for control endpoints. + ****************************************************************************** + * @attention + * + * Copyright (c) 2015 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_ioreq.h" + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + + +/** @defgroup USBD_IOREQ + * @brief control I/O requests module + * @{ + */ + +/** @defgroup USBD_IOREQ_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_Defines + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_Macros + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_Variables + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_FunctionPrototypes + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_Functions + * @{ + */ + +/** + * @brief USBD_CtlSendData + * send data on the ctl pipe + * @param pdev: device instance + * @param buff: pointer to data buffer + * @param len: length of data to be sent + * @retval status + */ +USBD_StatusTypeDef USBD_CtlSendData(USBD_HandleTypeDef *pdev, + uint8_t *pbuf, uint32_t len) +{ + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_DATA_IN; + pdev->ep_in[0].total_length = len; + +#ifdef USBD_AVOID_PACKET_SPLIT_MPS + pdev->ep_in[0].rem_length = 0U; +#else + pdev->ep_in[0].rem_length = len; +#endif /* USBD_AVOID_PACKET_SPLIT_MPS */ + + /* Start the transfer */ + (void)USBD_LL_Transmit(pdev, 0x00U, pbuf, len); + + return USBD_OK; +} + +/** + * @brief USBD_CtlContinueSendData + * continue sending data on the ctl pipe + * @param pdev: device instance + * @param buff: pointer to data buffer + * @param len: length of data to be sent + * @retval status + */ +USBD_StatusTypeDef USBD_CtlContinueSendData(USBD_HandleTypeDef *pdev, + uint8_t *pbuf, uint32_t len) +{ + /* Start the next transfer */ + (void)USBD_LL_Transmit(pdev, 0x00U, pbuf, len); + + return USBD_OK; +} + +/** + * @brief USBD_CtlPrepareRx + * receive data on the ctl pipe + * @param pdev: device instance + * @param buff: pointer to data buffer + * @param len: length of data to be received + * @retval status + */ +USBD_StatusTypeDef USBD_CtlPrepareRx(USBD_HandleTypeDef *pdev, + uint8_t *pbuf, uint32_t len) +{ + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_DATA_OUT; + pdev->ep_out[0].total_length = len; + +#ifdef USBD_AVOID_PACKET_SPLIT_MPS + pdev->ep_out[0].rem_length = 0U; +#else + pdev->ep_out[0].rem_length = len; +#endif /* USBD_AVOID_PACKET_SPLIT_MPS */ + + /* Start the transfer */ + (void)USBD_LL_PrepareReceive(pdev, 0U, pbuf, len); + + return USBD_OK; +} + +/** + * @brief USBD_CtlContinueRx + * continue receive data on the ctl pipe + * @param pdev: device instance + * @param buff: pointer to data buffer + * @param len: length of data to be received + * @retval status + */ +USBD_StatusTypeDef USBD_CtlContinueRx(USBD_HandleTypeDef *pdev, + uint8_t *pbuf, uint32_t len) +{ + (void)USBD_LL_PrepareReceive(pdev, 0U, pbuf, len); + + return USBD_OK; +} + +/** + * @brief USBD_CtlSendStatus + * send zero lzngth packet on the ctl pipe + * @param pdev: device instance + * @retval status + */ +USBD_StatusTypeDef USBD_CtlSendStatus(USBD_HandleTypeDef *pdev) +{ + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_STATUS_IN; + + /* Start the transfer */ + (void)USBD_LL_Transmit(pdev, 0x00U, NULL, 0U); + + return USBD_OK; +} + +/** + * @brief USBD_CtlReceiveStatus + * receive zero lzngth packet on the ctl pipe + * @param pdev: device instance + * @retval status + */ +USBD_StatusTypeDef USBD_CtlReceiveStatus(USBD_HandleTypeDef *pdev) +{ + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_STATUS_OUT; + + /* Start the transfer */ + (void)USBD_LL_PrepareReceive(pdev, 0U, NULL, 0U); + + return USBD_OK; +} + +/** + * @brief USBD_GetRxCount + * returns the received data length + * @param pdev: device instance + * @param ep_addr: endpoint address + * @retval Rx Data blength + */ +uint32_t USBD_GetRxCount(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + return USBD_LL_GetRxDataSize(pdev, ep_addr); +} + +/** + * @} + */ + + +/** + * @} + */ + + +/** + * @} + */ + diff --git a/Middlewares/Third_Party/FatFs/src/diskio.c b/Middlewares/Third_Party/FatFs/src/diskio.c new file mode 100644 index 0000000..5cf8edf --- /dev/null +++ b/Middlewares/Third_Party/FatFs/src/diskio.c @@ -0,0 +1,141 @@ +/*-----------------------------------------------------------------------*/ +/* Low level disk I/O module skeleton for FatFs (C)ChaN, 2017 */ +/* */ +/* Portions COPYRIGHT 2017 STMicroelectronics */ +/* Portions Copyright (C) 2017, ChaN, all right reserved */ +/*-----------------------------------------------------------------------*/ +/* If a working storage control module is available, it should be */ +/* attached to the FatFs via a glue function rather than modifying it. */ +/* This is an example of glue functions to attach various existing */ +/* storage control modules to the FatFs module with a defined API. */ +/*-----------------------------------------------------------------------*/ + +/* Includes ------------------------------------------------------------------*/ +#include "diskio.h" +#include "ff_gen_drv.h" + +#if defined ( __GNUC__ ) +#ifndef __weak +#define __weak __attribute__((weak)) +#endif +#endif + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +extern Disk_drvTypeDef disk; + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** + * @brief Gets Disk Status + * @param pdrv: Physical drive number (0..) + * @retval DSTATUS: Operation status + */ +DSTATUS disk_status ( + BYTE pdrv /* Physical drive number to identify the drive */ +) +{ + DSTATUS stat; + + stat = disk.drv[pdrv]->disk_status(disk.lun[pdrv]); + return stat; +} + +/** + * @brief Initializes a Drive + * @param pdrv: Physical drive number (0..) + * @retval DSTATUS: Operation status + */ +DSTATUS disk_initialize ( + BYTE pdrv /* Physical drive nmuber to identify the drive */ +) +{ + DSTATUS stat = RES_OK; + + if(disk.is_initialized[pdrv] == 0) + { + disk.is_initialized[pdrv] = 1; + stat = disk.drv[pdrv]->disk_initialize(disk.lun[pdrv]); + } + return stat; +} + +/** + * @brief Reads Sector(s) + * @param pdrv: Physical drive number (0..) + * @param *buff: Data buffer to store read data + * @param sector: Sector address (LBA) + * @param count: Number of sectors to read (1..128) + * @retval DRESULT: Operation result + */ +DRESULT disk_read ( + BYTE pdrv, /* Physical drive nmuber to identify the drive */ + BYTE *buff, /* Data buffer to store read data */ + DWORD sector, /* Sector address in LBA */ + UINT count /* Number of sectors to read */ +) +{ + DRESULT res; + + res = disk.drv[pdrv]->disk_read(disk.lun[pdrv], buff, sector, count); + return res; +} + +/** + * @brief Writes Sector(s) + * @param pdrv: Physical drive number (0..) + * @param *buff: Data to be written + * @param sector: Sector address (LBA) + * @param count: Number of sectors to write (1..128) + * @retval DRESULT: Operation result + */ +#if _USE_WRITE == 1 +DRESULT disk_write ( + BYTE pdrv, /* Physical drive nmuber to identify the drive */ + const BYTE *buff, /* Data to be written */ + DWORD sector, /* Sector address in LBA */ + UINT count /* Number of sectors to write */ +) +{ + DRESULT res; + + res = disk.drv[pdrv]->disk_write(disk.lun[pdrv], buff, sector, count); + return res; +} +#endif /* _USE_WRITE == 1 */ + +/** + * @brief I/O control operation + * @param pdrv: Physical drive number (0..) + * @param cmd: Control code + * @param *buff: Buffer to send/receive control data + * @retval DRESULT: Operation result + */ +#if _USE_IOCTL == 1 +DRESULT disk_ioctl ( + BYTE pdrv, /* Physical drive nmuber (0..) */ + BYTE cmd, /* Control code */ + void *buff /* Buffer to send/receive control data */ +) +{ + DRESULT res; + + res = disk.drv[pdrv]->disk_ioctl(disk.lun[pdrv], cmd, buff); + return res; +} +#endif /* _USE_IOCTL == 1 */ + +/** + * @brief Gets Time from RTC + * @param None + * @retval Time in DWORD + */ +__weak DWORD get_fattime (void) +{ + return 0; +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Middlewares/Third_Party/FatFs/src/diskio.h b/Middlewares/Third_Party/FatFs/src/diskio.h new file mode 100644 index 0000000..5b61e57 --- /dev/null +++ b/Middlewares/Third_Party/FatFs/src/diskio.h @@ -0,0 +1,80 @@ +/*-----------------------------------------------------------------------/ +/ Low level disk interface modlue include file (C)ChaN, 2014 / +/-----------------------------------------------------------------------*/ + +#ifndef _DISKIO_DEFINED +#define _DISKIO_DEFINED + +#ifdef __cplusplus +extern "C" { +#endif + +#define _USE_WRITE 1 /* 1: Enable disk_write function */ +#define _USE_IOCTL 1 /* 1: Enable disk_ioctl function */ + +#include "integer.h" + + +/* Status of Disk Functions */ +typedef BYTE DSTATUS; + +/* Results of Disk Functions */ +typedef enum { + RES_OK = 0, /* 0: Successful */ + RES_ERROR, /* 1: R/W Error */ + RES_WRPRT, /* 2: Write Protected */ + RES_NOTRDY, /* 3: Not Ready */ + RES_PARERR /* 4: Invalid Parameter */ +} DRESULT; + + +/*---------------------------------------*/ +/* Prototypes for disk control functions */ + + +DSTATUS disk_initialize (BYTE pdrv); +DSTATUS disk_status (BYTE pdrv); +DRESULT disk_read (BYTE pdrv, BYTE* buff, DWORD sector, UINT count); +DRESULT disk_write (BYTE pdrv, const BYTE* buff, DWORD sector, UINT count); +DRESULT disk_ioctl (BYTE pdrv, BYTE cmd, void* buff); +DWORD get_fattime (void); + +/* Disk Status Bits (DSTATUS) */ + +#define STA_NOINIT 0x01 /* Drive not initialized */ +#define STA_NODISK 0x02 /* No medium in the drive */ +#define STA_PROTECT 0x04 /* Write protected */ + + +/* Command code for disk_ioctrl fucntion */ + +/* Generic command (Used by FatFs) */ +#define CTRL_SYNC 0 /* Complete pending write process (needed at _FS_READONLY == 0) */ +#define GET_SECTOR_COUNT 1 /* Get media size (needed at _USE_MKFS == 1) */ +#define GET_SECTOR_SIZE 2 /* Get sector size (needed at _MAX_SS != _MIN_SS) */ +#define GET_BLOCK_SIZE 3 /* Get erase block size (needed at _USE_MKFS == 1) */ +#define CTRL_TRIM 4 /* Inform device that the data on the block of sectors is no longer used (needed at _USE_TRIM == 1) */ + +/* Generic command (Not used by FatFs) */ +#define CTRL_POWER 5 /* Get/Set power status */ +#define CTRL_LOCK 6 /* Lock/Unlock media removal */ +#define CTRL_EJECT 7 /* Eject media */ +#define CTRL_FORMAT 8 /* Create physical format on the media */ + +/* MMC/SDC specific ioctl command */ +#define MMC_GET_TYPE 10 /* Get card type */ +#define MMC_GET_CSD 11 /* Get CSD */ +#define MMC_GET_CID 12 /* Get CID */ +#define MMC_GET_OCR 13 /* Get OCR */ +#define MMC_GET_SDSTAT 14 /* Get SD status */ + +/* ATA/CF specific ioctl command */ +#define ATA_GET_REV 20 /* Get F/W revision */ +#define ATA_GET_MODEL 21 /* Get model name */ +#define ATA_GET_SN 22 /* Get serial number */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/Middlewares/Third_Party/FatFs/src/ff.c b/Middlewares/Third_Party/FatFs/src/ff.c new file mode 100644 index 0000000..b0bd436 --- /dev/null +++ b/Middlewares/Third_Party/FatFs/src/ff.c @@ -0,0 +1,6140 @@ +/*----------------------------------------------------------------------------/ +/ FatFs - Generic FAT file system module R0.12c / +/-----------------------------------------------------------------------------/ +/ +/ Copyright (C) 2017, ChaN, all right reserved. +/ +/ FatFs module is an open source software. Redistribution and use of FatFs in +/ source and binary forms, with or without modification, are permitted provided +/ that the following condition is met: +/ +/ 1. Redistributions of source code must retain the above copyright notice, +/ this condition and the following disclaimer. +/ +/ This software is provided by the copyright holder and contributors "AS IS" +/ and any warranties related to this software are DISCLAIMED. +/ The copyright owner or contributors be NOT LIABLE for any damages caused +/ by use of this software. +/----------------------------------------------------------------------------*/ + + +#include "ff.h" /* Declarations of FatFs API */ +#include "diskio.h" /* Declarations of device I/O functions */ + + +/*-------------------------------------------------------------------------- + + Module Private Definitions + +---------------------------------------------------------------------------*/ + +#if _FATFS != 68300 /* Revision ID */ +#error Wrong include file (ff.h). +#endif + + +/* DBCS code ranges and SBCS upper conversion tables */ + +#if _CODE_PAGE == 932 /* Japanese Shift-JIS */ +#define _DF1S 0x81 /* DBC 1st byte range 1 start */ +#define _DF1E 0x9F /* DBC 1st byte range 1 end */ +#define _DF2S 0xE0 /* DBC 1st byte range 2 start */ +#define _DF2E 0xFC /* DBC 1st byte range 2 end */ +#define _DS1S 0x40 /* DBC 2nd byte range 1 start */ +#define _DS1E 0x7E /* DBC 2nd byte range 1 end */ +#define _DS2S 0x80 /* DBC 2nd byte range 2 start */ +#define _DS2E 0xFC /* DBC 2nd byte range 2 end */ + +#elif _CODE_PAGE == 936 /* Simplified Chinese GBK */ +#define _DF1S 0x81 +#define _DF1E 0xFE +#define _DS1S 0x40 +#define _DS1E 0x7E +#define _DS2S 0x80 +#define _DS2E 0xFE + +#elif _CODE_PAGE == 949 /* Korean */ +#define _DF1S 0x81 +#define _DF1E 0xFE +#define _DS1S 0x41 +#define _DS1E 0x5A +#define _DS2S 0x61 +#define _DS2E 0x7A +#define _DS3S 0x81 +#define _DS3E 0xFE + +#elif _CODE_PAGE == 950 /* Traditional Chinese Big5 */ +#define _DF1S 0x81 +#define _DF1E 0xFE +#define _DS1S 0x40 +#define _DS1E 0x7E +#define _DS2S 0xA1 +#define _DS2E 0xFE + +#elif _CODE_PAGE == 437 /* U.S. */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x45,0x41,0x8E,0x41,0x8F,0x80,0x45,0x45,0x45,0x49,0x49,0x49,0x8E,0x8F, \ + 0x90,0x92,0x92,0x4F,0x99,0x4F,0x55,0x55,0x59,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 720 /* Arabic */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F, \ + 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 737 /* Greek */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F, \ + 0x90,0x92,0x92,0x93,0x94,0x95,0x96,0x97,0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87, \ + 0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0xAA,0x92,0x93,0x94,0x95,0x96, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0x97,0xEA,0xEB,0xEC,0xE4,0xED,0xEE,0xEF,0xF5,0xF0,0xEA,0xEB,0xEC,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 771 /* KBL */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F, \ + 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDC,0xDE,0xDE, \ + 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0xF0,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF8,0xFA,0xFA,0xFC,0xFC,0xFE,0xFF} + +#elif _CODE_PAGE == 775 /* Baltic */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x91,0xA0,0x8E,0x95,0x8F,0x80,0xAD,0xED,0x8A,0x8A,0xA1,0x8D,0x8E,0x8F, \ + 0x90,0x92,0x92,0xE2,0x99,0x95,0x96,0x97,0x97,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \ + 0xA0,0xA1,0xE0,0xA3,0xA3,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xB5,0xB6,0xB7,0xB8,0xBD,0xBE,0xC6,0xC7,0xA5,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE3,0xE8,0xE8,0xEA,0xEA,0xEE,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 850 /* Latin 1 */ +#define _DF1S 0 +#define _EXCVT {0x43,0x55,0x45,0x41,0x41,0x41,0x41,0x43,0x45,0x45,0x45,0x49,0x49,0x49,0x41,0x41, \ + 0x45,0x92,0x92,0x4F,0x4F,0x4F,0x55,0x55,0x59,0x4F,0x55,0x4F,0x9C,0x4F,0x9E,0x9F, \ + 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0x41,0x41,0x41,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0x41,0x41,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD1,0xD1,0x45,0x45,0x45,0x49,0x49,0x49,0x49,0xD9,0xDA,0xDB,0xDC,0xDD,0x49,0xDF, \ + 0x4F,0xE1,0x4F,0x4F,0x4F,0x4F,0xE6,0xE8,0xE8,0x55,0x55,0x55,0x59,0x59,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 852 /* Latin 2 */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xDE,0x8F,0x80,0x9D,0xD3,0x8A,0x8A,0xD7,0x8D,0x8E,0x8F, \ + 0x90,0x91,0x91,0xE2,0x99,0x95,0x95,0x97,0x97,0x99,0x9A,0x9B,0x9B,0x9D,0x9E,0xAC, \ + 0xB5,0xD6,0xE0,0xE9,0xA4,0xA4,0xA6,0xA6,0xA8,0xA8,0xAA,0x8D,0xAC,0xB8,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBD,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC6,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD1,0xD1,0xD2,0xD3,0xD2,0xD5,0xD6,0xD7,0xB7,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE3,0xD5,0xE6,0xE6,0xE8,0xE9,0xE8,0xEB,0xED,0xED,0xDD,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xEB,0xFC,0xFC,0xFE,0xFF} + +#elif _CODE_PAGE == 855 /* Cyrillic */ +#define _DF1S 0 +#define _EXCVT {0x81,0x81,0x83,0x83,0x85,0x85,0x87,0x87,0x89,0x89,0x8B,0x8B,0x8D,0x8D,0x8F,0x8F, \ + 0x91,0x91,0x93,0x93,0x95,0x95,0x97,0x97,0x99,0x99,0x9B,0x9B,0x9D,0x9D,0x9F,0x9F, \ + 0xA1,0xA1,0xA3,0xA3,0xA5,0xA5,0xA7,0xA7,0xA9,0xA9,0xAB,0xAB,0xAD,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB6,0xB6,0xB8,0xB8,0xB9,0xBA,0xBB,0xBC,0xBE,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD1,0xD1,0xD3,0xD3,0xD5,0xD5,0xD7,0xD7,0xDD,0xD9,0xDA,0xDB,0xDC,0xDD,0xE0,0xDF, \ + 0xE0,0xE2,0xE2,0xE4,0xE4,0xE6,0xE6,0xE8,0xE8,0xEA,0xEA,0xEC,0xEC,0xEE,0xEE,0xEF, \ + 0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF8,0xFA,0xFA,0xFC,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 857 /* Turkish */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0x49,0x8E,0x8F, \ + 0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x98,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9E, \ + 0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA6,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0x49,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xDE,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 860 /* Portuguese */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x90,0x8F,0x8E,0x91,0x86,0x80,0x89,0x89,0x92,0x8B,0x8C,0x98,0x8E,0x8F, \ + 0x90,0x91,0x92,0x8C,0x99,0xA9,0x96,0x9D,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0x86,0x8B,0x9F,0x96,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 861 /* Icelandic */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x90,0x41,0x8E,0x41,0x8F,0x80,0x45,0x45,0x45,0x8B,0x8B,0x8D,0x8E,0x8F, \ + 0x90,0x92,0x92,0x4F,0x99,0x8D,0x55,0x97,0x97,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \ + 0xA4,0xA5,0xA6,0xA7,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 862 /* Hebrew */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F, \ + 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 863 /* Canadian-French */ +#define _DF1S 0 +#define _EXCVT {0x43,0x55,0x45,0x41,0x41,0x41,0x86,0x43,0x45,0x45,0x45,0x49,0x49,0x8D,0x41,0x8F, \ + 0x45,0x45,0x45,0x4F,0x45,0x49,0x55,0x55,0x98,0x4F,0x55,0x9B,0x9C,0x55,0x55,0x9F, \ + 0xA0,0xA1,0x4F,0x55,0xA4,0xA5,0xA6,0xA7,0x49,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 864 /* Arabic */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x45,0x41,0x8E,0x41,0x8F,0x80,0x45,0x45,0x45,0x49,0x49,0x49,0x8E,0x8F, \ + 0x90,0x92,0x92,0x4F,0x99,0x4F,0x55,0x55,0x59,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 865 /* Nordic */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x90,0x41,0x8E,0x41,0x8F,0x80,0x45,0x45,0x45,0x49,0x49,0x49,0x8E,0x8F, \ + 0x90,0x92,0x92,0x4F,0x99,0x4F,0x55,0x55,0x59,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF, \ + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 866 /* Russian */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F, \ + 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0xF0,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 869 /* Greek 2 */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F, \ + 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x86,0x9C,0x8D,0x8F,0x90, \ + 0x91,0x90,0x92,0x95,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF, \ + 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, \ + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xA4,0xA5,0xA6,0xD9,0xDA,0xDB,0xDC,0xA7,0xA8,0xDF, \ + 0xA9,0xAA,0xAC,0xAD,0xB5,0xB6,0xB7,0xB8,0xBD,0xBE,0xC6,0xC7,0xCF,0xCF,0xD0,0xEF, \ + 0xF0,0xF1,0xD1,0xD2,0xD3,0xF5,0xD4,0xF7,0xF8,0xF9,0xD5,0x96,0x95,0x98,0xFE,0xFF} + +#elif _CODE_PAGE == 1 /* ASCII (for only non-LFN cfg) */ +#if _USE_LFN != 0 +#error Cannot enable LFN without valid code page. +#endif +#define _DF1S 0 + +#else +#error Unknown code page + +#endif + + +/* Character code support macros */ +#define IsUpper(c) (((c)>='A')&&((c)<='Z')) +#define IsLower(c) (((c)>='a')&&((c)<='z')) +#define IsDigit(c) (((c)>='0')&&((c)<='9')) + +#if _DF1S != 0 /* Code page is DBCS */ + +#ifdef _DF2S /* Two 1st byte areas */ +#define IsDBCS1(c) (((BYTE)(c) >= _DF1S && (BYTE)(c) <= _DF1E) || ((BYTE)(c) >= _DF2S && (BYTE)(c) <= _DF2E)) +#else /* One 1st byte area */ +#define IsDBCS1(c) ((BYTE)(c) >= _DF1S && (BYTE)(c) <= _DF1E) +#endif + +#ifdef _DS3S /* Three 2nd byte areas */ +#define IsDBCS2(c) (((BYTE)(c) >= _DS1S && (BYTE)(c) <= _DS1E) || ((BYTE)(c) >= _DS2S && (BYTE)(c) <= _DS2E) || ((BYTE)(c) >= _DS3S && (BYTE)(c) <= _DS3E)) +#else /* Two 2nd byte areas */ +#define IsDBCS2(c) (((BYTE)(c) >= _DS1S && (BYTE)(c) <= _DS1E) || ((BYTE)(c) >= _DS2S && (BYTE)(c) <= _DS2E)) +#endif + +#else /* Code page is SBCS */ + +#define IsDBCS1(c) 0 +#define IsDBCS2(c) 0 + +#endif /* _DF1S */ + + +/* Additional file attribute bits for internal use */ +#define AM_VOL 0x08 /* Volume label */ +#define AM_LFN 0x0F /* LFN entry */ +#define AM_MASK 0x3F /* Mask of defined bits */ + + +/* Additional file access control and file status flags for internal use */ +#define FA_SEEKEND 0x20 /* Seek to end of the file on file open */ +#define FA_MODIFIED 0x40 /* File has been modified */ +#define FA_DIRTY 0x80 /* FIL.buf[] needs to be written-back */ + + +/* Name status flags in fn[] */ +#define NSFLAG 11 /* Index of the name status byte */ +#define NS_LOSS 0x01 /* Out of 8.3 format */ +#define NS_LFN 0x02 /* Force to create LFN entry */ +#define NS_LAST 0x04 /* Last segment */ +#define NS_BODY 0x08 /* Lower case flag (body) */ +#define NS_EXT 0x10 /* Lower case flag (ext) */ +#define NS_DOT 0x20 /* Dot entry */ +#define NS_NOLFN 0x40 /* Do not find LFN */ +#define NS_NONAME 0x80 /* Not followed */ + + +/* Limits and boundaries */ +#define MAX_DIR 0x200000 /* Max size of FAT directory */ +#define MAX_DIR_EX 0x10000000 /* Max size of exFAT directory */ +#define MAX_FAT12 0xFF5 /* Max FAT12 clusters (differs from specs, but correct for real DOS/Windows behavior) */ +#define MAX_FAT16 0xFFF5 /* Max FAT16 clusters (differs from specs, but correct for real DOS/Windows behavior) */ +#define MAX_FAT32 0x0FFFFFF5 /* Max FAT32 clusters (not specified, practical limit) */ +#define MAX_EXFAT 0x7FFFFFFD /* Max exFAT clusters (differs from specs, implementation limit) */ + + +/* FatFs refers the FAT structure as simple byte array instead of structure member +/ because the C structure is not binary compatible between different platforms */ + +#define BS_JmpBoot 0 /* x86 jump instruction (3-byte) */ +#define BS_OEMName 3 /* OEM name (8-byte) */ +#define BPB_BytsPerSec 11 /* Sector size [byte] (WORD) */ +#define BPB_SecPerClus 13 /* Cluster size [sector] (BYTE) */ +#define BPB_RsvdSecCnt 14 /* Size of reserved area [sector] (WORD) */ +#define BPB_NumFATs 16 /* Number of FATs (BYTE) */ +#define BPB_RootEntCnt 17 /* Size of root directory area for FAT12/16 [entry] (WORD) */ +#define BPB_TotSec16 19 /* Volume size (16-bit) [sector] (WORD) */ +#define BPB_Media 21 /* Media descriptor byte (BYTE) */ +#define BPB_FATSz16 22 /* FAT size (16-bit) [sector] (WORD) */ +#define BPB_SecPerTrk 24 /* Track size for int13h [sector] (WORD) */ +#define BPB_NumHeads 26 /* Number of heads for int13h (WORD) */ +#define BPB_HiddSec 28 /* Volume offset from top of the drive (DWORD) */ +#define BPB_TotSec32 32 /* Volume size (32-bit) [sector] (DWORD) */ +#define BS_DrvNum 36 /* Physical drive number for int13h (BYTE) */ +#define BS_NTres 37 /* Error flag (BYTE) */ +#define BS_BootSig 38 /* Extended boot signature (BYTE) */ +#define BS_VolID 39 /* Volume serial number (DWORD) */ +#define BS_VolLab 43 /* Volume label string (8-byte) */ +#define BS_FilSysType 54 /* File system type string (8-byte) */ +#define BS_BootCode 62 /* Boot code (448-byte) */ +#define BS_55AA 510 /* Signature word (WORD) */ + +#define BPB_FATSz32 36 /* FAT32: FAT size [sector] (DWORD) */ +#define BPB_ExtFlags32 40 /* FAT32: Extended flags (WORD) */ +#define BPB_FSVer32 42 /* FAT32: File system version (WORD) */ +#define BPB_RootClus32 44 /* FAT32: Root directory cluster (DWORD) */ +#define BPB_FSInfo32 48 /* FAT32: Offset of FSINFO sector (WORD) */ +#define BPB_BkBootSec32 50 /* FAT32: Offset of backup boot sector (WORD) */ +#define BS_DrvNum32 64 /* FAT32: Physical drive number for int13h (BYTE) */ +#define BS_NTres32 65 /* FAT32: Error flag (BYTE) */ +#define BS_BootSig32 66 /* FAT32: Extended boot signature (BYTE) */ +#define BS_VolID32 67 /* FAT32: Volume serial number (DWORD) */ +#define BS_VolLab32 71 /* FAT32: Volume label string (8-byte) */ +#define BS_FilSysType32 82 /* FAT32: File system type string (8-byte) */ +#define BS_BootCode32 90 /* FAT32: Boot code (420-byte) */ + +#define BPB_ZeroedEx 11 /* exFAT: MBZ field (53-byte) */ +#define BPB_VolOfsEx 64 /* exFAT: Volume offset from top of the drive [sector] (QWORD) */ +#define BPB_TotSecEx 72 /* exFAT: Volume size [sector] (QWORD) */ +#define BPB_FatOfsEx 80 /* exFAT: FAT offset from top of the volume [sector] (DWORD) */ +#define BPB_FatSzEx 84 /* exFAT: FAT size [sector] (DWORD) */ +#define BPB_DataOfsEx 88 /* exFAT: Data offset from top of the volume [sector] (DWORD) */ +#define BPB_NumClusEx 92 /* exFAT: Number of clusters (DWORD) */ +#define BPB_RootClusEx 96 /* exFAT: Root directory start cluster (DWORD) */ +#define BPB_VolIDEx 100 /* exFAT: Volume serial number (DWORD) */ +#define BPB_FSVerEx 104 /* exFAT: File system version (WORD) */ +#define BPB_VolFlagEx 106 /* exFAT: Volume flags (BYTE) */ +#define BPB_ActFatEx 107 /* exFAT: Active FAT flags (BYTE) */ +#define BPB_BytsPerSecEx 108 /* exFAT: Log2 of sector size in unit of byte (BYTE) */ +#define BPB_SecPerClusEx 109 /* exFAT: Log2 of cluster size in unit of sector (BYTE) */ +#define BPB_NumFATsEx 110 /* exFAT: Number of FATs (BYTE) */ +#define BPB_DrvNumEx 111 /* exFAT: Physical drive number for int13h (BYTE) */ +#define BPB_PercInUseEx 112 /* exFAT: Percent in use (BYTE) */ +#define BPB_RsvdEx 113 /* exFAT: Reserved (7-byte) */ +#define BS_BootCodeEx 120 /* exFAT: Boot code (390-byte) */ + +#define DIR_Name 0 /* Short file name (11-byte) */ +#define DIR_Attr 11 /* Attribute (BYTE) */ +#define DIR_NTres 12 /* Lower case flag (BYTE) */ +#define DIR_CrtTime10 13 /* Created time sub-second (BYTE) */ +#define DIR_CrtTime 14 /* Created time (DWORD) */ +#define DIR_LstAccDate 18 /* Last accessed date (WORD) */ +#define DIR_FstClusHI 20 /* Higher 16-bit of first cluster (WORD) */ +#define DIR_ModTime 22 /* Modified time (DWORD) */ +#define DIR_FstClusLO 26 /* Lower 16-bit of first cluster (WORD) */ +#define DIR_FileSize 28 /* File size (DWORD) */ +#define LDIR_Ord 0 /* LFN: LFN order and LLE flag (BYTE) */ +#define LDIR_Attr 11 /* LFN: LFN attribute (BYTE) */ +#define LDIR_Type 12 /* LFN: Entry type (BYTE) */ +#define LDIR_Chksum 13 /* LFN: Checksum of the SFN (BYTE) */ +#define LDIR_FstClusLO 26 /* LFN: MBZ field (WORD) */ +#define XDIR_Type 0 /* exFAT: Type of exFAT directory entry (BYTE) */ +#define XDIR_NumLabel 1 /* exFAT: Number of volume label characters (BYTE) */ +#define XDIR_Label 2 /* exFAT: Volume label (11-WORD) */ +#define XDIR_CaseSum 4 /* exFAT: Sum of case conversion table (DWORD) */ +#define XDIR_NumSec 1 /* exFAT: Number of secondary entries (BYTE) */ +#define XDIR_SetSum 2 /* exFAT: Sum of the set of directory entries (WORD) */ +#define XDIR_Attr 4 /* exFAT: File attribute (WORD) */ +#define XDIR_CrtTime 8 /* exFAT: Created time (DWORD) */ +#define XDIR_ModTime 12 /* exFAT: Modified time (DWORD) */ +#define XDIR_AccTime 16 /* exFAT: Last accessed time (DWORD) */ +#define XDIR_CrtTime10 20 /* exFAT: Created time subsecond (BYTE) */ +#define XDIR_ModTime10 21 /* exFAT: Modified time subsecond (BYTE) */ +#define XDIR_CrtTZ 22 /* exFAT: Created timezone (BYTE) */ +#define XDIR_ModTZ 23 /* exFAT: Modified timezone (BYTE) */ +#define XDIR_AccTZ 24 /* exFAT: Last accessed timezone (BYTE) */ +#define XDIR_GenFlags 33 /* exFAT: General secondary flags (WORD) */ +#define XDIR_NumName 35 /* exFAT: Number of file name characters (BYTE) */ +#define XDIR_NameHash 36 /* exFAT: Hash of file name (WORD) */ +#define XDIR_ValidFileSize 40 /* exFAT: Valid file size (QWORD) */ +#define XDIR_FstClus 52 /* exFAT: First cluster of the file data (DWORD) */ +#define XDIR_FileSize 56 /* exFAT: File/Directory size (QWORD) */ + +#define SZDIRE 32 /* Size of a directory entry */ +#define DDEM 0xE5 /* Deleted directory entry mark set to DIR_Name[0] */ +#define RDDEM 0x05 /* Replacement of the character collides with DDEM */ +#define LLEF 0x40 /* Last long entry flag in LDIR_Ord */ + +#define FSI_LeadSig 0 /* FAT32 FSI: Leading signature (DWORD) */ +#define FSI_StrucSig 484 /* FAT32 FSI: Structure signature (DWORD) */ +#define FSI_Free_Count 488 /* FAT32 FSI: Number of free clusters (DWORD) */ +#define FSI_Nxt_Free 492 /* FAT32 FSI: Last allocated cluster (DWORD) */ + +#define MBR_Table 446 /* MBR: Offset of partition table in the MBR */ +#define SZ_PTE 16 /* MBR: Size of a partition table entry */ +#define PTE_Boot 0 /* MBR PTE: Boot indicator */ +#define PTE_StHead 1 /* MBR PTE: Start head */ +#define PTE_StSec 2 /* MBR PTE: Start sector */ +#define PTE_StCyl 3 /* MBR PTE: Start cylinder */ +#define PTE_System 4 /* MBR PTE: System ID */ +#define PTE_EdHead 5 /* MBR PTE: End head */ +#define PTE_EdSec 6 /* MBR PTE: End sector */ +#define PTE_EdCyl 7 /* MBR PTE: End cylinder */ +#define PTE_StLba 8 /* MBR PTE: Start in LBA */ +#define PTE_SizLba 12 /* MBR PTE: Size in LBA */ + + +/* Post process after fatal error on file operation */ +#define ABORT(fs, res) { fp->err = (BYTE)(res); LEAVE_FF(fs, res); } + + +/* Reentrancy related */ +#if _FS_REENTRANT +#if _USE_LFN == 1 +#error Static LFN work area cannot be used at thread-safe configuration +#endif +#define ENTER_FF(fs) { if (!lock_fs(fs)) return FR_TIMEOUT; } +#define LEAVE_FF(fs, res) { unlock_fs(fs, res); return res; } +#else +#define ENTER_FF(fs) +#define LEAVE_FF(fs, res) return res +#endif + + +/* Definitions of volume - partition conversion */ +#if _MULTI_PARTITION +#define LD2PD(vol) VolToPart[vol].pd /* Get physical drive number */ +#define LD2PT(vol) VolToPart[vol].pt /* Get partition index */ +#else +#define LD2PD(vol) (BYTE)(vol) /* Each logical drive is bound to the same physical drive number */ +#define LD2PT(vol) 0 /* Find first valid partition or in SFD */ +#endif + + +/* Definitions of sector size */ +#if (_MAX_SS < _MIN_SS) || (_MAX_SS != 512 && _MAX_SS != 1024 && _MAX_SS != 2048 && _MAX_SS != 4096) || (_MIN_SS != 512 && _MIN_SS != 1024 && _MIN_SS != 2048 && _MIN_SS != 4096) +#error Wrong sector size configuration +#endif +#if _MAX_SS == _MIN_SS +#define SS(fs) ((UINT)_MAX_SS) /* Fixed sector size */ +#else +#define SS(fs) ((fs)->ssize) /* Variable sector size */ +#endif + + +/* Timestamp */ +#if _FS_NORTC == 1 +#if _NORTC_YEAR < 1980 || _NORTC_YEAR > 2107 || _NORTC_MON < 1 || _NORTC_MON > 12 || _NORTC_MDAY < 1 || _NORTC_MDAY > 31 +#error Invalid _FS_NORTC settings +#endif +#define GET_FATTIME() ((DWORD)(_NORTC_YEAR - 1980) << 25 | (DWORD)_NORTC_MON << 21 | (DWORD)_NORTC_MDAY << 16) +#else +#define GET_FATTIME() get_fattime() +#endif + + +/* File lock controls */ +#if _FS_LOCK != 0 +#if _FS_READONLY +#error _FS_LOCK must be 0 at read-only configuration +#endif +typedef struct { + FATFS *fs; /* Object ID 1, volume (NULL:blank entry) */ + DWORD clu; /* Object ID 2, containing directory (0:root) */ + DWORD ofs; /* Object ID 3, offset in the directory */ + WORD ctr; /* Object open counter, 0:none, 0x01..0xFF:read mode open count, 0x100:write mode */ +} FILESEM; +#endif + + + + + +/*-------------------------------------------------------------------------- + + Module Private Work Area + +---------------------------------------------------------------------------*/ + +/* Remark: Variables defined here without initial value shall be guaranteed +/ zero/null at start-up. If not, the linker option or start-up routine is +/ not compliance with C standard. */ + +#if _VOLUMES < 1 || _VOLUMES > 10 +#error Wrong _VOLUMES setting +#endif +static FATFS *FatFs[_VOLUMES]; /* Pointer to the file system objects (logical drives) */ +static WORD Fsid; /* File system mount ID */ + +#if _FS_RPATH != 0 && _VOLUMES >= 2 +static BYTE CurrVol; /* Current drive */ +#endif + +#if _FS_LOCK != 0 +static FILESEM Files[_FS_LOCK]; /* Open object lock semaphores */ +#endif + +#if _USE_LFN == 0 /* Non-LFN configuration */ +#define DEF_NAMBUF +#define INIT_NAMBUF(fs) +#define FREE_NAMBUF() + +#else /* LFN configuration */ +#if _MAX_LFN < 12 || _MAX_LFN > 255 +#error Wrong _MAX_LFN value +#endif +#define MAXDIRB(nc) ((nc + 44U) / 15 * SZDIRE) + +#if _USE_LFN == 1 /* LFN enabled with static working buffer */ +#if _FS_EXFAT +static BYTE DirBuf[MAXDIRB(_MAX_LFN)]; /* Directory entry block scratchpad buffer */ +#endif +static WCHAR LfnBuf[_MAX_LFN + 1]; /* LFN enabled with static working buffer */ +#define DEF_NAMBUF +#define INIT_NAMBUF(fs) +#define FREE_NAMBUF() + +#elif _USE_LFN == 2 /* LFN enabled with dynamic working buffer on the stack */ +#if _FS_EXFAT +#define DEF_NAMBUF WCHAR lbuf[_MAX_LFN+1]; BYTE dbuf[MAXDIRB(_MAX_LFN)]; +#define INIT_NAMBUF(fs) { (fs)->lfnbuf = lbuf; (fs)->dirbuf = dbuf; } +#define FREE_NAMBUF() +#else +#define DEF_NAMBUF WCHAR lbuf[_MAX_LFN+1]; +#define INIT_NAMBUF(fs) { (fs)->lfnbuf = lbuf; } +#define FREE_NAMBUF() +#endif + +#elif _USE_LFN == 3 /* LFN enabled with dynamic working buffer on the heap */ +#if _FS_EXFAT +#define DEF_NAMBUF WCHAR *lfn; +#define INIT_NAMBUF(fs) { lfn = ff_memalloc((_MAX_LFN+1)*2 + MAXDIRB(_MAX_LFN)); if (!lfn) LEAVE_FF(fs, FR_NOT_ENOUGH_CORE); (fs)->lfnbuf = lfn; (fs)->dirbuf = (BYTE*)(lfn+_MAX_LFN+1); } +#define FREE_NAMBUF() ff_memfree(lfn) +#else +#define DEF_NAMBUF WCHAR *lfn; +#define INIT_NAMBUF(fs) { lfn = ff_memalloc((_MAX_LFN+1)*2); if (!lfn) LEAVE_FF(fs, FR_NOT_ENOUGH_CORE); (fs)->lfnbuf = lfn; } +#define FREE_NAMBUF() ff_memfree(lfn) +#endif + +#else +#error Wrong _USE_LFN setting + +#endif +#endif /* else _USE_LFN == 0 */ + +#ifdef _EXCVT +static const BYTE ExCvt[] = _EXCVT; /* Upper conversion table for SBCS extended characters */ +#endif + + + + + + +/*-------------------------------------------------------------------------- + + Module Private Functions + +---------------------------------------------------------------------------*/ + + +/*-----------------------------------------------------------------------*/ +/* Load/Store multi-byte word in the FAT structure */ +/*-----------------------------------------------------------------------*/ + +static +WORD ld_word (const BYTE* ptr) /* Load a 2-byte little-endian word */ +{ + WORD rv; + + rv = ptr[1]; + rv = rv << 8 | ptr[0]; + return rv; +} + +static +DWORD ld_dword (const BYTE* ptr) /* Load a 4-byte little-endian word */ +{ + DWORD rv; + + rv = ptr[3]; + rv = rv << 8 | ptr[2]; + rv = rv << 8 | ptr[1]; + rv = rv << 8 | ptr[0]; + return rv; +} + +#if _FS_EXFAT +static +QWORD ld_qword (const BYTE* ptr) /* Load an 8-byte little-endian word */ +{ + QWORD rv; + + rv = ptr[7]; + rv = rv << 8 | ptr[6]; + rv = rv << 8 | ptr[5]; + rv = rv << 8 | ptr[4]; + rv = rv << 8 | ptr[3]; + rv = rv << 8 | ptr[2]; + rv = rv << 8 | ptr[1]; + rv = rv << 8 | ptr[0]; + return rv; +} +#endif + +#if !_FS_READONLY +static +void st_word (BYTE* ptr, WORD val) /* Store a 2-byte word in little-endian */ +{ + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; +} + +static +void st_dword (BYTE* ptr, DWORD val) /* Store a 4-byte word in little-endian */ +{ + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; +} + +#if _FS_EXFAT +static +void st_qword (BYTE* ptr, QWORD val) /* Store an 8-byte word in little-endian */ +{ + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; val >>= 8; + *ptr++ = (BYTE)val; +} +#endif +#endif /* !_FS_READONLY */ + + + +/*-----------------------------------------------------------------------*/ +/* String functions */ +/*-----------------------------------------------------------------------*/ + +/* Copy memory to memory */ +static +void mem_cpy (void* dst, const void* src, UINT cnt) { + BYTE *d = (BYTE*)dst; + const BYTE *s = (const BYTE*)src; + + if (cnt) { + do { + *d++ = *s++; + } while (--cnt); + } +} + +/* Fill memory block */ +static +void mem_set (void* dst, int val, UINT cnt) { + BYTE *d = (BYTE*)dst; + + do { + *d++ = (BYTE)val; + } while (--cnt); +} + +/* Compare memory block */ +static +int mem_cmp (const void* dst, const void* src, UINT cnt) { /* ZR:same, NZ:different */ + const BYTE *d = (const BYTE *)dst, *s = (const BYTE *)src; + int r = 0; + + do { + r = *d++ - *s++; + } while (--cnt && r == 0); + + return r; +} + +/* Check if chr is contained in the string */ +static +int chk_chr (const char* str, int chr) { /* NZ:contained, ZR:not contained */ + while (*str && *str != chr) str++; + return *str; +} + + + + +#if _FS_REENTRANT +/*-----------------------------------------------------------------------*/ +/* Request/Release grant to access the volume */ +/*-----------------------------------------------------------------------*/ +static +int lock_fs ( + FATFS* fs /* File system object */ +) +{ + return (fs && ff_req_grant(fs->sobj)) ? 1 : 0; +} + + +static +void unlock_fs ( + FATFS* fs, /* File system object */ + FRESULT res /* Result code to be returned */ +) +{ + if (fs && res != FR_NOT_ENABLED && res != FR_INVALID_DRIVE && res != FR_TIMEOUT) { + ff_rel_grant(fs->sobj); + } +} + +#endif + + + +#if _FS_LOCK != 0 +/*-----------------------------------------------------------------------*/ +/* File lock control functions */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT chk_lock ( /* Check if the file can be accessed */ + DIR* dp, /* Directory object pointing the file to be checked */ + int acc /* Desired access type (0:Read, 1:Write, 2:Delete/Rename) */ +) +{ + UINT i, be; + + /* Search file semaphore table */ + for (i = be = 0; i < _FS_LOCK; i++) { + if (Files[i].fs) { /* Existing entry */ + if (Files[i].fs == dp->obj.fs && /* Check if the object matched with an open object */ + Files[i].clu == dp->obj.sclust && + Files[i].ofs == dp->dptr) break; + } else { /* Blank entry */ + be = 1; + } + } + if (i == _FS_LOCK) { /* The object is not opened */ + return (be || acc == 2) ? FR_OK : FR_TOO_MANY_OPEN_FILES; /* Is there a blank entry for new object? */ + } + + /* The object has been opened. Reject any open against writing file and all write mode open */ + return (acc || Files[i].ctr == 0x100) ? FR_LOCKED : FR_OK; +} + + +static +int enq_lock (void) /* Check if an entry is available for a new object */ +{ + UINT i; + + for (i = 0; i < _FS_LOCK && Files[i].fs; i++) ; + return (i == _FS_LOCK) ? 0 : 1; +} + + +static +UINT inc_lock ( /* Increment object open counter and returns its index (0:Internal error) */ + DIR* dp, /* Directory object pointing the file to register or increment */ + int acc /* Desired access (0:Read, 1:Write, 2:Delete/Rename) */ +) +{ + UINT i; + + + for (i = 0; i < _FS_LOCK; i++) { /* Find the object */ + if (Files[i].fs == dp->obj.fs && + Files[i].clu == dp->obj.sclust && + Files[i].ofs == dp->dptr) break; + } + + if (i == _FS_LOCK) { /* Not opened. Register it as new. */ + for (i = 0; i < _FS_LOCK && Files[i].fs; i++) ; + if (i == _FS_LOCK) return 0; /* No free entry to register (int err) */ + Files[i].fs = dp->obj.fs; + Files[i].clu = dp->obj.sclust; + Files[i].ofs = dp->dptr; + Files[i].ctr = 0; + } + + if (acc && Files[i].ctr) return 0; /* Access violation (int err) */ + + Files[i].ctr = acc ? 0x100 : Files[i].ctr + 1; /* Set semaphore value */ + + return i + 1; +} + + +static +FRESULT dec_lock ( /* Decrement object open counter */ + UINT i /* Semaphore index (1..) */ +) +{ + WORD n; + FRESULT res; + + + if (--i < _FS_LOCK) { /* Shift index number origin from 0 */ + n = Files[i].ctr; + if (n == 0x100) n = 0; /* If write mode open, delete the entry */ + if (n > 0) n--; /* Decrement read mode open count */ + Files[i].ctr = n; + if (n == 0) Files[i].fs = 0; /* Delete the entry if open count gets zero */ + res = FR_OK; + } else { + res = FR_INT_ERR; /* Invalid index nunber */ + } + return res; +} + + +static +void clear_lock ( /* Clear lock entries of the volume */ + FATFS *fs +) +{ + UINT i; + + for (i = 0; i < _FS_LOCK; i++) { + if (Files[i].fs == fs) Files[i].fs = 0; + } +} + +#endif /* _FS_LOCK != 0 */ + + + +/*-----------------------------------------------------------------------*/ +/* Move/Flush disk access window in the file system object */ +/*-----------------------------------------------------------------------*/ +#if !_FS_READONLY +static +FRESULT sync_window ( /* Returns FR_OK or FR_DISK_ERROR */ + FATFS* fs /* File system object */ +) +{ + DWORD wsect; + UINT nf; + FRESULT res = FR_OK; + + + if (fs->wflag) { /* Write back the sector if it is dirty */ + wsect = fs->winsect; /* Current sector number */ + if (disk_write(fs->drv, fs->win, wsect, 1) != RES_OK) { + res = FR_DISK_ERR; + } else { + fs->wflag = 0; + if (wsect - fs->fatbase < fs->fsize) { /* Is it in the FAT area? */ + for (nf = fs->n_fats; nf >= 2; nf--) { /* Reflect the change to all FAT copies */ + wsect += fs->fsize; + disk_write(fs->drv, fs->win, wsect, 1); + } + } + } + } + return res; +} +#endif + + +static +FRESULT move_window ( /* Returns FR_OK or FR_DISK_ERROR */ + FATFS* fs, /* File system object */ + DWORD sector /* Sector number to make appearance in the fs->win[] */ +) +{ + FRESULT res = FR_OK; + + + if (sector != fs->winsect) { /* Window offset changed? */ +#if !_FS_READONLY + res = sync_window(fs); /* Write-back changes */ +#endif + if (res == FR_OK) { /* Fill sector window with new data */ + if (disk_read(fs->drv, fs->win, sector, 1) != RES_OK) { + sector = 0xFFFFFFFF; /* Invalidate window if data is not reliable */ + res = FR_DISK_ERR; + } + fs->winsect = sector; + } + } + return res; +} + + + + +#if !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* Synchronize file system and strage device */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT sync_fs ( /* FR_OK:succeeded, !=0:error */ + FATFS* fs /* File system object */ +) +{ + FRESULT res; + + + res = sync_window(fs); + if (res == FR_OK) { + /* Update FSInfo sector if needed */ + if (fs->fs_type == FS_FAT32 && fs->fsi_flag == 1) { + /* Create FSInfo structure */ + mem_set(fs->win, 0, SS(fs)); + st_word(fs->win + BS_55AA, 0xAA55); + st_dword(fs->win + FSI_LeadSig, 0x41615252); + st_dword(fs->win + FSI_StrucSig, 0x61417272); + st_dword(fs->win + FSI_Free_Count, fs->free_clst); + st_dword(fs->win + FSI_Nxt_Free, fs->last_clst); + /* Write it into the FSInfo sector */ + fs->winsect = fs->volbase + 1; + disk_write(fs->drv, fs->win, fs->winsect, 1); + fs->fsi_flag = 0; + } + /* Make sure that no pending write process in the physical drive */ + if (disk_ioctl(fs->drv, CTRL_SYNC, 0) != RES_OK) res = FR_DISK_ERR; + } + + return res; +} + +#endif + + + +/*-----------------------------------------------------------------------*/ +/* Get sector# from cluster# */ +/*-----------------------------------------------------------------------*/ + +static +DWORD clust2sect ( /* !=0:Sector number, 0:Failed (invalid cluster#) */ + FATFS* fs, /* File system object */ + DWORD clst /* Cluster# to be converted */ +) +{ + clst -= 2; + if (clst >= fs->n_fatent - 2) return 0; /* Invalid cluster# */ + return clst * fs->csize + fs->database; +} + + + + +/*-----------------------------------------------------------------------*/ +/* FAT access - Read value of a FAT entry */ +/*-----------------------------------------------------------------------*/ + +static +DWORD get_fat ( /* 0xFFFFFFFF:Disk error, 1:Internal error, 2..0x7FFFFFFF:Cluster status */ + _FDID* obj, /* Corresponding object */ + DWORD clst /* Cluster number to get the value */ +) +{ + UINT wc, bc; + DWORD val; + FATFS *fs = obj->fs; + + + if (clst < 2 || clst >= fs->n_fatent) { /* Check if in valid range */ + val = 1; /* Internal error */ + + } else { + val = 0xFFFFFFFF; /* Default value falls on disk error */ + + switch (fs->fs_type) { + case FS_FAT12 : + bc = (UINT)clst; bc += bc / 2; + if (move_window(fs, fs->fatbase + (bc / SS(fs))) != FR_OK) break; + wc = fs->win[bc++ % SS(fs)]; + if (move_window(fs, fs->fatbase + (bc / SS(fs))) != FR_OK) break; + wc |= fs->win[bc % SS(fs)] << 8; + val = (clst & 1) ? (wc >> 4) : (wc & 0xFFF); + break; + + case FS_FAT16 : + if (move_window(fs, fs->fatbase + (clst / (SS(fs) / 2))) != FR_OK) break; + val = ld_word(fs->win + clst * 2 % SS(fs)); + break; + + case FS_FAT32 : + if (move_window(fs, fs->fatbase + (clst / (SS(fs) / 4))) != FR_OK) break; + val = ld_dword(fs->win + clst * 4 % SS(fs)) & 0x0FFFFFFF; + break; +#if _FS_EXFAT + case FS_EXFAT : + if (obj->objsize) { + DWORD cofs = clst - obj->sclust; /* Offset from start cluster */ + DWORD clen = (DWORD)((obj->objsize - 1) / SS(fs)) / fs->csize; /* Number of clusters - 1 */ + + if (obj->stat == 2) { /* Is there no valid chain on the FAT? */ + if (cofs <= clen) { + val = (cofs == clen) ? 0x7FFFFFFF : clst + 1; /* Generate the value */ + break; + } + } + if (obj->stat == 3 && cofs < obj->n_cont) { /* Is it in the 1st fragment? */ + val = clst + 1; /* Generate the value */ + break; + } + if (obj->stat != 2) { /* Get value from FAT if FAT chain is valid */ + if (obj->n_frag != 0) { /* Is it on the growing edge? */ + val = 0x7FFFFFFF; /* Generate EOC */ + } else { + if (move_window(fs, fs->fatbase + (clst / (SS(fs) / 4))) != FR_OK) break; + val = ld_dword(fs->win + clst * 4 % SS(fs)) & 0x7FFFFFFF; + } + break; + } + } + /* go to default */ +#endif + default: + val = 1; /* Internal error */ + } + } + + return val; +} + + + + +#if !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* FAT access - Change value of a FAT entry */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT put_fat ( /* FR_OK(0):succeeded, !=0:error */ + FATFS* fs, /* Corresponding file system object */ + DWORD clst, /* FAT index number (cluster number) to be changed */ + DWORD val /* New value to be set to the entry */ +) +{ + UINT bc; + BYTE *p; + FRESULT res = FR_INT_ERR; + + if (clst >= 2 && clst < fs->n_fatent) { /* Check if in valid range */ + switch (fs->fs_type) { + case FS_FAT12 : /* Bitfield items */ + bc = (UINT)clst; bc += bc / 2; + res = move_window(fs, fs->fatbase + (bc / SS(fs))); + if (res != FR_OK) break; + p = fs->win + bc++ % SS(fs); + *p = (clst & 1) ? ((*p & 0x0F) | ((BYTE)val << 4)) : (BYTE)val; + fs->wflag = 1; + res = move_window(fs, fs->fatbase + (bc / SS(fs))); + if (res != FR_OK) break; + p = fs->win + bc % SS(fs); + *p = (clst & 1) ? (BYTE)(val >> 4) : ((*p & 0xF0) | ((BYTE)(val >> 8) & 0x0F)); + fs->wflag = 1; + break; + + case FS_FAT16 : /* WORD aligned items */ + res = move_window(fs, fs->fatbase + (clst / (SS(fs) / 2))); + if (res != FR_OK) break; + st_word(fs->win + clst * 2 % SS(fs), (WORD)val); + fs->wflag = 1; + break; + + case FS_FAT32 : /* DWORD aligned items */ +#if _FS_EXFAT + case FS_EXFAT : +#endif + res = move_window(fs, fs->fatbase + (clst / (SS(fs) / 4))); + if (res != FR_OK) break; + if (!_FS_EXFAT || fs->fs_type != FS_EXFAT) { + val = (val & 0x0FFFFFFF) | (ld_dword(fs->win + clst * 4 % SS(fs)) & 0xF0000000); + } + st_dword(fs->win + clst * 4 % SS(fs), val); + fs->wflag = 1; + break; + } + } + return res; +} + +#endif /* !_FS_READONLY */ + + + + +#if _FS_EXFAT && !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* exFAT: Accessing FAT and Allocation Bitmap */ +/*-----------------------------------------------------------------------*/ + +/*--------------------------------------*/ +/* Find a contiguous free cluster block */ +/*--------------------------------------*/ + +static +DWORD find_bitmap ( /* 0:Not found, 2..:Cluster block found, 0xFFFFFFFF:Disk error */ + FATFS* fs, /* File system object */ + DWORD clst, /* Cluster number to scan from */ + DWORD ncl /* Number of contiguous clusters to find (1..) */ +) +{ + BYTE bm, bv; + UINT i; + DWORD val, scl, ctr; + + + clst -= 2; /* The first bit in the bitmap corresponds to cluster #2 */ + if (clst >= fs->n_fatent - 2) clst = 0; + scl = val = clst; ctr = 0; + for (;;) { + if (move_window(fs, fs->database + val / 8 / SS(fs)) != FR_OK) return 0xFFFFFFFF; /* (assuming bitmap is located top of the cluster heap) */ + i = val / 8 % SS(fs); bm = 1 << (val % 8); + do { + do { + bv = fs->win[i] & bm; bm <<= 1; /* Get bit value */ + if (++val >= fs->n_fatent - 2) { /* Next cluster (with wrap-around) */ + val = 0; bm = 0; i = SS(fs); + } + if (!bv) { /* Is it a free cluster? */ + if (++ctr == ncl) return scl + 2; /* Check if run length is sufficient for required */ + } else { + scl = val; ctr = 0; /* Encountered a cluster in-use, restart to scan */ + } + if (val == clst) return 0; /* All cluster scanned? */ + } while (bm); + bm = 1; + } while (++i < SS(fs)); + } +} + + +/*----------------------------------------*/ +/* Set/Clear a block of allocation bitmap */ +/*----------------------------------------*/ + +static +FRESULT change_bitmap ( + FATFS* fs, /* File system object */ + DWORD clst, /* Cluster number to change from */ + DWORD ncl, /* Number of clusters to be changed */ + int bv /* bit value to be set (0 or 1) */ +) +{ + BYTE bm; + UINT i; + DWORD sect; + + clst -= 2; /* The first bit corresponds to cluster #2 */ + sect = fs->database + clst / 8 / SS(fs); /* Sector address (assuming bitmap is located top of the cluster heap) */ + i = clst / 8 % SS(fs); /* Byte offset in the sector */ + bm = 1 << (clst % 8); /* Bit mask in the byte */ + for (;;) { + if (move_window(fs, sect++) != FR_OK) return FR_DISK_ERR; + do { + do { + if (bv == (int)((fs->win[i] & bm) != 0)) return FR_INT_ERR; /* Is the bit expected value? */ + fs->win[i] ^= bm; /* Flip the bit */ + fs->wflag = 1; + if (--ncl == 0) return FR_OK; /* All bits processed? */ + } while (bm <<= 1); /* Next bit */ + bm = 1; + } while (++i < SS(fs)); /* Next byte */ + i = 0; + } +} + + +/*---------------------------------------------*/ +/* Fill the first fragment of the FAT chain */ +/*---------------------------------------------*/ + +static +FRESULT fill_first_frag ( + _FDID* obj /* Pointer to the corresponding object */ +) +{ + FRESULT res; + DWORD cl, n; + + if (obj->stat == 3) { /* Has the object been changed 'fragmented'? */ + for (cl = obj->sclust, n = obj->n_cont; n; cl++, n--) { /* Create cluster chain on the FAT */ + res = put_fat(obj->fs, cl, cl + 1); + if (res != FR_OK) return res; + } + obj->stat = 0; /* Change status 'FAT chain is valid' */ + } + return FR_OK; +} + + +/*---------------------------------------------*/ +/* Fill the last fragment of the FAT chain */ +/*---------------------------------------------*/ + +static +FRESULT fill_last_frag ( + _FDID* obj, /* Pointer to the corresponding object */ + DWORD lcl, /* Last cluster of the fragment */ + DWORD term /* Value to set the last FAT entry */ +) +{ + FRESULT res; + + while (obj->n_frag > 0) { /* Create the last chain on the FAT */ + res = put_fat(obj->fs, lcl - obj->n_frag + 1, (obj->n_frag > 1) ? lcl - obj->n_frag + 2 : term); + if (res != FR_OK) return res; + obj->n_frag--; + } + return FR_OK; +} + +#endif /* _FS_EXFAT && !_FS_READONLY */ + + + +#if !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* FAT handling - Remove a cluster chain */ +/*-----------------------------------------------------------------------*/ +static +FRESULT remove_chain ( /* FR_OK(0):succeeded, !=0:error */ + _FDID* obj, /* Corresponding object */ + DWORD clst, /* Cluster to remove a chain from */ + DWORD pclst /* Previous cluster of clst (0:an entire chain) */ +) +{ + FRESULT res = FR_OK; + DWORD nxt; + FATFS *fs = obj->fs; +#if _FS_EXFAT || _USE_TRIM + DWORD scl = clst, ecl = clst; +#endif +#if _USE_TRIM + DWORD rt[2]; +#endif + + if (clst < 2 || clst >= fs->n_fatent) return FR_INT_ERR; /* Check if in valid range */ + + /* Mark the previous cluster 'EOC' on the FAT if it exists */ + if (pclst && (!_FS_EXFAT || fs->fs_type != FS_EXFAT || obj->stat != 2)) { + res = put_fat(fs, pclst, 0xFFFFFFFF); + if (res != FR_OK) return res; + } + + /* Remove the chain */ + do { + nxt = get_fat(obj, clst); /* Get cluster status */ + if (nxt == 0) break; /* Empty cluster? */ + if (nxt == 1) return FR_INT_ERR; /* Internal error? */ + if (nxt == 0xFFFFFFFF) return FR_DISK_ERR; /* Disk error? */ + if (!_FS_EXFAT || fs->fs_type != FS_EXFAT) { + res = put_fat(fs, clst, 0); /* Mark the cluster 'free' on the FAT */ + if (res != FR_OK) return res; + } + if (fs->free_clst < fs->n_fatent - 2) { /* Update FSINFO */ + fs->free_clst++; + fs->fsi_flag |= 1; + } +#if _FS_EXFAT || _USE_TRIM + if (ecl + 1 == nxt) { /* Is next cluster contiguous? */ + ecl = nxt; + } else { /* End of contiguous cluster block */ +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + res = change_bitmap(fs, scl, ecl - scl + 1, 0); /* Mark the cluster block 'free' on the bitmap */ + if (res != FR_OK) return res; + } +#endif +#if _USE_TRIM + rt[0] = clust2sect(fs, scl); /* Start sector */ + rt[1] = clust2sect(fs, ecl) + fs->csize - 1; /* End sector */ + disk_ioctl(fs->drv, CTRL_TRIM, rt); /* Inform device the block can be erased */ +#endif + scl = ecl = nxt; + } +#endif + clst = nxt; /* Next cluster */ + } while (clst < fs->n_fatent); /* Repeat while not the last link */ + +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + if (pclst == 0) { /* Does the object have no chain? */ + obj->stat = 0; /* Change the object status 'initial' */ + } else { + if (obj->stat == 3 && pclst >= obj->sclust && pclst <= obj->sclust + obj->n_cont) { /* Did the chain get contiguous? */ + obj->stat = 2; /* Change the object status 'contiguous' */ + } + } + } +#endif + return FR_OK; +} + + + + +/*-----------------------------------------------------------------------*/ +/* FAT handling - Stretch a chain or Create a new chain */ +/*-----------------------------------------------------------------------*/ +static +DWORD create_chain ( /* 0:No free cluster, 1:Internal error, 0xFFFFFFFF:Disk error, >=2:New cluster# */ + _FDID* obj, /* Corresponding object */ + DWORD clst /* Cluster# to stretch, 0:Create a new chain */ +) +{ + DWORD cs, ncl, scl; + FRESULT res; + FATFS *fs = obj->fs; + + + if (clst == 0) { /* Create a new chain */ + scl = fs->last_clst; /* Get suggested cluster to start from */ + if (scl == 0 || scl >= fs->n_fatent) scl = 1; + } + else { /* Stretch current chain */ + cs = get_fat(obj, clst); /* Check the cluster status */ + if (cs < 2) return 1; /* Invalid FAT value */ + if (cs == 0xFFFFFFFF) return cs; /* A disk error occurred */ + if (cs < fs->n_fatent) return cs; /* It is already followed by next cluster */ + scl = clst; + } + +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { /* On the exFAT volume */ + ncl = find_bitmap(fs, scl, 1); /* Find a free cluster */ + if (ncl == 0 || ncl == 0xFFFFFFFF) return ncl; /* No free cluster or hard error? */ + res = change_bitmap(fs, ncl, 1, 1); /* Mark the cluster 'in use' */ + if (res == FR_INT_ERR) return 1; + if (res == FR_DISK_ERR) return 0xFFFFFFFF; + if (clst == 0) { /* Is it a new chain? */ + obj->stat = 2; /* Set status 'contiguous' */ + } else { /* It is a stretched chain */ + if (obj->stat == 2 && ncl != scl + 1) { /* Is the chain got fragmented? */ + obj->n_cont = scl - obj->sclust; /* Set size of the contiguous part */ + obj->stat = 3; /* Change status 'just fragmented' */ + } + } + if (obj->stat != 2) { /* Is the file non-contiguous? */ + if (ncl == clst + 1) { /* Is the cluster next to previous one? */ + obj->n_frag = obj->n_frag ? obj->n_frag + 1 : 2; /* Increment size of last framgent */ + } else { /* New fragment */ + if (obj->n_frag == 0) obj->n_frag = 1; + res = fill_last_frag(obj, clst, ncl); /* Fill last fragment on the FAT and link it to new one */ + if (res == FR_OK) obj->n_frag = 1; + } + } + } else +#endif + { /* On the FAT12/16/32 volume */ + ncl = scl; /* Start cluster */ + for (;;) { + ncl++; /* Next cluster */ + if (ncl >= fs->n_fatent) { /* Check wrap-around */ + ncl = 2; + if (ncl > scl) return 0; /* No free cluster */ + } + cs = get_fat(obj, ncl); /* Get the cluster status */ + if (cs == 0) break; /* Found a free cluster */ + if (cs == 1 || cs == 0xFFFFFFFF) return cs; /* An error occurred */ + if (ncl == scl) return 0; /* No free cluster */ + } + res = put_fat(fs, ncl, 0xFFFFFFFF); /* Mark the new cluster 'EOC' */ + if (res == FR_OK && clst != 0) { + res = put_fat(fs, clst, ncl); /* Link it from the previous one if needed */ + } + } + + if (res == FR_OK) { /* Update FSINFO if function succeeded. */ + fs->last_clst = ncl; + if (fs->free_clst <= fs->n_fatent - 2) fs->free_clst--; + fs->fsi_flag |= 1; + } else { + ncl = (res == FR_DISK_ERR) ? 0xFFFFFFFF : 1; /* Failed. Generate error status */ + } + + return ncl; /* Return new cluster number or error status */ +} + +#endif /* !_FS_READONLY */ + + + + +#if _USE_FASTSEEK +/*-----------------------------------------------------------------------*/ +/* FAT handling - Convert offset into cluster with link map table */ +/*-----------------------------------------------------------------------*/ + +static +DWORD clmt_clust ( /* <2:Error, >=2:Cluster number */ + FIL* fp, /* Pointer to the file object */ + FSIZE_t ofs /* File offset to be converted to cluster# */ +) +{ + DWORD cl, ncl, *tbl; + FATFS *fs = fp->obj.fs; + + + tbl = fp->cltbl + 1; /* Top of CLMT */ + cl = (DWORD)(ofs / SS(fs) / fs->csize); /* Cluster order from top of the file */ + for (;;) { + ncl = *tbl++; /* Number of cluters in the fragment */ + if (ncl == 0) return 0; /* End of table? (error) */ + if (cl < ncl) break; /* In this fragment? */ + cl -= ncl; tbl++; /* Next fragment */ + } + return cl + *tbl; /* Return the cluster number */ +} + +#endif /* _USE_FASTSEEK */ + + + + +/*-----------------------------------------------------------------------*/ +/* Directory handling - Set directory index */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT dir_sdi ( /* FR_OK(0):succeeded, !=0:error */ + DIR* dp, /* Pointer to directory object */ + DWORD ofs /* Offset of directory table */ +) +{ + DWORD csz, clst; + FATFS *fs = dp->obj.fs; + + + if (ofs >= (DWORD)((_FS_EXFAT && fs->fs_type == FS_EXFAT) ? MAX_DIR_EX : MAX_DIR) || ofs % SZDIRE) { /* Check range of offset and alignment */ + return FR_INT_ERR; + } + dp->dptr = ofs; /* Set current offset */ + clst = dp->obj.sclust; /* Table start cluster (0:root) */ + if (clst == 0 && fs->fs_type >= FS_FAT32) { /* Replace cluster# 0 with root cluster# */ + clst = fs->dirbase; + if (_FS_EXFAT) dp->obj.stat = 0; /* exFAT: Root dir has an FAT chain */ + } + + if (clst == 0) { /* Static table (root-directory in FAT12/16) */ + if (ofs / SZDIRE >= fs->n_rootdir) return FR_INT_ERR; /* Is index out of range? */ + dp->sect = fs->dirbase; + + } else { /* Dynamic table (sub-directory or root-directory in FAT32+) */ + csz = (DWORD)fs->csize * SS(fs); /* Bytes per cluster */ + while (ofs >= csz) { /* Follow cluster chain */ + clst = get_fat(&dp->obj, clst); /* Get next cluster */ + if (clst == 0xFFFFFFFF) return FR_DISK_ERR; /* Disk error */ + if (clst < 2 || clst >= fs->n_fatent) return FR_INT_ERR; /* Reached to end of table or internal error */ + ofs -= csz; + } + dp->sect = clust2sect(fs, clst); + } + dp->clust = clst; /* Current cluster# */ + if (!dp->sect) return FR_INT_ERR; + dp->sect += ofs / SS(fs); /* Sector# of the directory entry */ + dp->dir = fs->win + (ofs % SS(fs)); /* Pointer to the entry in the win[] */ + + return FR_OK; +} + + + + +/*-----------------------------------------------------------------------*/ +/* Directory handling - Move directory table index next */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT dir_next ( /* FR_OK(0):succeeded, FR_NO_FILE:End of table, FR_DENIED:Could not stretch */ + DIR* dp, /* Pointer to the directory object */ + int stretch /* 0: Do not stretch table, 1: Stretch table if needed */ +) +{ + DWORD ofs, clst; + FATFS *fs = dp->obj.fs; +#if !_FS_READONLY + UINT n; +#endif + + ofs = dp->dptr + SZDIRE; /* Next entry */ + if (!dp->sect || ofs >= (DWORD)((_FS_EXFAT && fs->fs_type == FS_EXFAT) ? MAX_DIR_EX : MAX_DIR)) return FR_NO_FILE; /* Report EOT when offset has reached max value */ + + if (ofs % SS(fs) == 0) { /* Sector changed? */ + dp->sect++; /* Next sector */ + + if (!dp->clust) { /* Static table */ + if (ofs / SZDIRE >= fs->n_rootdir) { /* Report EOT if it reached end of static table */ + dp->sect = 0; return FR_NO_FILE; + } + } + else { /* Dynamic table */ + if ((ofs / SS(fs) & (fs->csize - 1)) == 0) { /* Cluster changed? */ + clst = get_fat(&dp->obj, dp->clust); /* Get next cluster */ + if (clst <= 1) return FR_INT_ERR; /* Internal error */ + if (clst == 0xFFFFFFFF) return FR_DISK_ERR; /* Disk error */ + if (clst >= fs->n_fatent) { /* Reached end of dynamic table */ +#if !_FS_READONLY + if (!stretch) { /* If no stretch, report EOT */ + dp->sect = 0; return FR_NO_FILE; + } + clst = create_chain(&dp->obj, dp->clust); /* Allocate a cluster */ + if (clst == 0) return FR_DENIED; /* No free cluster */ + if (clst == 1) return FR_INT_ERR; /* Internal error */ + if (clst == 0xFFFFFFFF) return FR_DISK_ERR; /* Disk error */ + /* Clean-up the stretched table */ + if (_FS_EXFAT) dp->obj.stat |= 4; /* The directory needs to be updated */ + if (sync_window(fs) != FR_OK) return FR_DISK_ERR; /* Flush disk access window */ + mem_set(fs->win, 0, SS(fs)); /* Clear window buffer */ + for (n = 0, fs->winsect = clust2sect(fs, clst); n < fs->csize; n++, fs->winsect++) { /* Fill the new cluster with 0 */ + fs->wflag = 1; + if (sync_window(fs) != FR_OK) return FR_DISK_ERR; + } + fs->winsect -= n; /* Restore window offset */ +#else + if (!stretch) dp->sect = 0; /* (this line is to suppress compiler warning) */ + dp->sect = 0; return FR_NO_FILE; /* Report EOT */ +#endif + } + dp->clust = clst; /* Initialize data for new cluster */ + dp->sect = clust2sect(fs, clst); + } + } + } + dp->dptr = ofs; /* Current entry */ + dp->dir = fs->win + ofs % SS(fs); /* Pointer to the entry in the win[] */ + + return FR_OK; +} + + + + +#if !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* Directory handling - Reserve a block of directory entries */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT dir_alloc ( /* FR_OK(0):succeeded, !=0:error */ + DIR* dp, /* Pointer to the directory object */ + UINT nent /* Number of contiguous entries to allocate */ +) +{ + FRESULT res; + UINT n; + FATFS *fs = dp->obj.fs; + + + res = dir_sdi(dp, 0); + if (res == FR_OK) { + n = 0; + do { + res = move_window(fs, dp->sect); + if (res != FR_OK) break; +#if _FS_EXFAT + if ((fs->fs_type == FS_EXFAT) ? (int)((dp->dir[XDIR_Type] & 0x80) == 0) : (int)(dp->dir[DIR_Name] == DDEM || dp->dir[DIR_Name] == 0)) { +#else + if (dp->dir[DIR_Name] == DDEM || dp->dir[DIR_Name] == 0) { +#endif + if (++n == nent) break; /* A block of contiguous free entries is found */ + } else { + n = 0; /* Not a blank entry. Restart to search */ + } + res = dir_next(dp, 1); + } while (res == FR_OK); /* Next entry with table stretch enabled */ + } + + if (res == FR_NO_FILE) res = FR_DENIED; /* No directory entry to allocate */ + return res; +} + +#endif /* !_FS_READONLY */ + + + + +/*-----------------------------------------------------------------------*/ +/* FAT: Directory handling - Load/Store start cluster number */ +/*-----------------------------------------------------------------------*/ + +static +DWORD ld_clust ( /* Returns the top cluster value of the SFN entry */ + FATFS* fs, /* Pointer to the fs object */ + const BYTE* dir /* Pointer to the key entry */ +) +{ + DWORD cl; + + cl = ld_word(dir + DIR_FstClusLO); + if (fs->fs_type == FS_FAT32) { + cl |= (DWORD)ld_word(dir + DIR_FstClusHI) << 16; + } + + return cl; +} + + +#if !_FS_READONLY +static +void st_clust ( + FATFS* fs, /* Pointer to the fs object */ + BYTE* dir, /* Pointer to the key entry */ + DWORD cl /* Value to be set */ +) +{ + st_word(dir + DIR_FstClusLO, (WORD)cl); + if (fs->fs_type == FS_FAT32) { + st_word(dir + DIR_FstClusHI, (WORD)(cl >> 16)); + } +} +#endif + + + +#if _USE_LFN != 0 +/*------------------------------------------------------------------------*/ +/* FAT-LFN: LFN handling */ +/*------------------------------------------------------------------------*/ +static +const BYTE LfnOfs[] = {1,3,5,7,9,14,16,18,20,22,24,28,30}; /* Offset of LFN characters in the directory entry */ + + +/*--------------------------------------------------------*/ +/* FAT-LFN: Compare a part of file name with an LFN entry */ +/*--------------------------------------------------------*/ +static +int cmp_lfn ( /* 1:matched, 0:not matched */ + const WCHAR* lfnbuf, /* Pointer to the LFN working buffer to be compared */ + BYTE* dir /* Pointer to the directory entry containing the part of LFN */ +) +{ + UINT i, s; + WCHAR wc, uc; + + + if (ld_word(dir + LDIR_FstClusLO) != 0) return 0; /* Check LDIR_FstClusLO */ + + i = ((dir[LDIR_Ord] & 0x3F) - 1) * 13; /* Offset in the LFN buffer */ + + for (wc = 1, s = 0; s < 13; s++) { /* Process all characters in the entry */ + uc = ld_word(dir + LfnOfs[s]); /* Pick an LFN character */ + if (wc) { + if (i >= _MAX_LFN || ff_wtoupper(uc) != ff_wtoupper(lfnbuf[i++])) { /* Compare it */ + return 0; /* Not matched */ + } + wc = uc; + } else { + if (uc != 0xFFFF) return 0; /* Check filler */ + } + } + + if ((dir[LDIR_Ord] & LLEF) && wc && lfnbuf[i]) return 0; /* Last segment matched but different length */ + + return 1; /* The part of LFN matched */ +} + + +#if _FS_MINIMIZE <= 1 || _FS_RPATH >= 2 || _USE_LABEL || _FS_EXFAT +/*-----------------------------------------------------*/ +/* FAT-LFN: Pick a part of file name from an LFN entry */ +/*-----------------------------------------------------*/ +static +int pick_lfn ( /* 1:succeeded, 0:buffer overflow or invalid LFN entry */ + WCHAR* lfnbuf, /* Pointer to the LFN working buffer */ + BYTE* dir /* Pointer to the LFN entry */ +) +{ + UINT i, s; + WCHAR wc, uc; + + + if (ld_word(dir + LDIR_FstClusLO) != 0) return 0; /* Check LDIR_FstClusLO is 0 */ + + i = ((dir[LDIR_Ord] & ~LLEF) - 1) * 13; /* Offset in the LFN buffer */ + + for (wc = 1, s = 0; s < 13; s++) { /* Process all characters in the entry */ + uc = ld_word(dir + LfnOfs[s]); /* Pick an LFN character */ + if (wc) { + if (i >= _MAX_LFN) return 0; /* Buffer overflow? */ + lfnbuf[i++] = wc = uc; /* Store it */ + } else { + if (uc != 0xFFFF) return 0; /* Check filler */ + } + } + + if (dir[LDIR_Ord] & LLEF) { /* Put terminator if it is the last LFN part */ + if (i >= _MAX_LFN) return 0; /* Buffer overflow? */ + lfnbuf[i] = 0; + } + + return 1; /* The part of LFN is valid */ +} +#endif + + +#if !_FS_READONLY +/*-----------------------------------------*/ +/* FAT-LFN: Create an entry of LFN entries */ +/*-----------------------------------------*/ +static +void put_lfn ( + const WCHAR* lfn, /* Pointer to the LFN */ + BYTE* dir, /* Pointer to the LFN entry to be created */ + BYTE ord, /* LFN order (1-20) */ + BYTE sum /* Checksum of the corresponding SFN */ +) +{ + UINT i, s; + WCHAR wc; + + + dir[LDIR_Chksum] = sum; /* Set checksum */ + dir[LDIR_Attr] = AM_LFN; /* Set attribute. LFN entry */ + dir[LDIR_Type] = 0; + st_word(dir + LDIR_FstClusLO, 0); + + i = (ord - 1) * 13; /* Get offset in the LFN working buffer */ + s = wc = 0; + do { + if (wc != 0xFFFF) wc = lfn[i++]; /* Get an effective character */ + st_word(dir + LfnOfs[s], wc); /* Put it */ + if (wc == 0) wc = 0xFFFF; /* Padding characters for left locations */ + } while (++s < 13); + if (wc == 0xFFFF || !lfn[i]) ord |= LLEF; /* Last LFN part is the start of LFN sequence */ + dir[LDIR_Ord] = ord; /* Set the LFN order */ +} + +#endif /* !_FS_READONLY */ +#endif /* _USE_LFN != 0 */ + + + +#if _USE_LFN != 0 && !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* FAT-LFN: Create a Numbered SFN */ +/*-----------------------------------------------------------------------*/ + +static +void gen_numname ( + BYTE* dst, /* Pointer to the buffer to store numbered SFN */ + const BYTE* src, /* Pointer to SFN */ + const WCHAR* lfn, /* Pointer to LFN */ + UINT seq /* Sequence number */ +) +{ + BYTE ns[8], c; + UINT i, j; + WCHAR wc; + DWORD sr; + + + mem_cpy(dst, src, 11); + + if (seq > 5) { /* In case of many collisions, generate a hash number instead of sequential number */ + sr = seq; + while (*lfn) { /* Create a CRC */ + wc = *lfn++; + for (i = 0; i < 16; i++) { + sr = (sr << 1) + (wc & 1); + wc >>= 1; + if (sr & 0x10000) sr ^= 0x11021; + } + } + seq = (UINT)sr; + } + + /* itoa (hexdecimal) */ + i = 7; + do { + c = (BYTE)((seq % 16) + '0'); + if (c > '9') c += 7; + ns[i--] = c; + seq /= 16; + } while (seq); + ns[i] = '~'; + + /* Append the number */ + for (j = 0; j < i && dst[j] != ' '; j++) { + if (IsDBCS1(dst[j])) { + if (j == i - 1) break; + j++; + } + } + do { + dst[j++] = (i < 8) ? ns[i++] : ' '; + } while (j < 8); +} +#endif /* _USE_LFN != 0 && !_FS_READONLY */ + + + +#if _USE_LFN != 0 +/*-----------------------------------------------------------------------*/ +/* FAT-LFN: Calculate checksum of an SFN entry */ +/*-----------------------------------------------------------------------*/ + +static +BYTE sum_sfn ( + const BYTE* dir /* Pointer to the SFN entry */ +) +{ + BYTE sum = 0; + UINT n = 11; + + do { + sum = (sum >> 1) + (sum << 7) + *dir++; + } while (--n); + return sum; +} + +#endif /* _USE_LFN != 0 */ + + + +#if _FS_EXFAT +/*-----------------------------------------------------------------------*/ +/* exFAT: Checksum */ +/*-----------------------------------------------------------------------*/ + +static +WORD xdir_sum ( /* Get checksum of the directoly block */ + const BYTE* dir /* Directory entry block to be calculated */ +) +{ + UINT i, szblk; + WORD sum; + + + szblk = (dir[XDIR_NumSec] + 1) * SZDIRE; + for (i = sum = 0; i < szblk; i++) { + if (i == XDIR_SetSum) { /* Skip sum field */ + i++; + } else { + sum = ((sum & 1) ? 0x8000 : 0) + (sum >> 1) + dir[i]; + } + } + return sum; +} + + + +static +WORD xname_sum ( /* Get check sum (to be used as hash) of the name */ + const WCHAR* name /* File name to be calculated */ +) +{ + WCHAR chr; + WORD sum = 0; + + + while ((chr = *name++) != 0) { + chr = ff_wtoupper(chr); /* File name needs to be ignored case */ + sum = ((sum & 1) ? 0x8000 : 0) + (sum >> 1) + (chr & 0xFF); + sum = ((sum & 1) ? 0x8000 : 0) + (sum >> 1) + (chr >> 8); + } + return sum; +} + + +#if !_FS_READONLY && _USE_MKFS +static +DWORD xsum32 ( + BYTE dat, /* Data to be sumed */ + DWORD sum /* Previous value */ +) +{ + sum = ((sum & 1) ? 0x80000000 : 0) + (sum >> 1) + dat; + return sum; +} +#endif + + +#if _FS_MINIMIZE <= 1 || _FS_RPATH >= 2 +/*------------------------------------------------------*/ +/* exFAT: Get object information from a directory block */ +/*------------------------------------------------------*/ + +static +void get_xdir_info ( + BYTE* dirb, /* Pointer to the direcotry entry block 85+C0+C1s */ + FILINFO* fno /* Buffer to store the extracted file information */ +) +{ + UINT di, si; + WCHAR w; +#if !_LFN_UNICODE + UINT nc; +#endif + + /* Get file name */ + di = 0; +#if _LFN_UNICODE + for (si = SZDIRE * 2; di < dirb[XDIR_NumName]; si += 2, di++) { + if ((si % SZDIRE) == 0) si += 2; /* Skip entry type field */ + w = ld_word(dirb + si); /* Get a character */ + if (di >= _MAX_LFN) { di = 0; break; } /* Buffer overflow --> inaccessible object name */ + fno->fname[di] = w; /* Store it */ + } +#else + for (si = SZDIRE * 2, nc = 0; nc < dirb[XDIR_NumName]; si += 2, nc++) { + if ((si % SZDIRE) == 0) si += 2; /* Skip entry type field */ + w = ff_convert(ld_word(dirb + si), 0); /* Get a character and Unicode -> OEM */ + if (_DF1S && w >= 0x100) { /* Is it a double byte char? (always false at SBCS cfg) */ + fno->fname[di++] = (char)(w >> 8); /* Put 1st byte of the DBC */ + } + if (w == 0 || di >= _MAX_LFN) { di = 0; break; } /* Invalid char or buffer overflow --> inaccessible object name */ + fno->fname[di++] = (char)w; + } +#endif + if (di == 0) fno->fname[di++] = '?'; /* Inaccessible object name? */ + fno->fname[di] = 0; /* Terminate file name */ + + fno->altname[0] = 0; /* No SFN */ + fno->fattrib = dirb[XDIR_Attr]; /* Attribute */ + fno->fsize = (fno->fattrib & AM_DIR) ? 0 : ld_qword(dirb + XDIR_FileSize); /* Size */ + fno->ftime = ld_word(dirb + XDIR_ModTime + 0); /* Time */ + fno->fdate = ld_word(dirb + XDIR_ModTime + 2); /* Date */ +} + +#endif /* _FS_MINIMIZE <= 1 || _FS_RPATH >= 2 */ + + +/*-----------------------------------*/ +/* exFAT: Get a directry entry block */ +/*-----------------------------------*/ + +static +FRESULT load_xdir ( /* FR_INT_ERR: invalid entry block */ + DIR* dp /* Pointer to the reading direcotry object pointing the 85 entry */ +) +{ + FRESULT res; + UINT i, sz_ent; + BYTE* dirb = dp->obj.fs->dirbuf; /* Pointer to the on-memory direcotry entry block 85+C0+C1s */ + + + /* Load 85 entry */ + res = move_window(dp->obj.fs, dp->sect); + if (res != FR_OK) return res; + if (dp->dir[XDIR_Type] != 0x85) return FR_INT_ERR; + mem_cpy(dirb + 0, dp->dir, SZDIRE); + sz_ent = (dirb[XDIR_NumSec] + 1) * SZDIRE; + if (sz_ent < 3 * SZDIRE || sz_ent > 19 * SZDIRE) return FR_INT_ERR; + + /* Load C0 entry */ + res = dir_next(dp, 0); + if (res != FR_OK) return res; + res = move_window(dp->obj.fs, dp->sect); + if (res != FR_OK) return res; + if (dp->dir[XDIR_Type] != 0xC0) return FR_INT_ERR; + mem_cpy(dirb + SZDIRE, dp->dir, SZDIRE); + if (MAXDIRB(dirb[XDIR_NumName]) > sz_ent) return FR_INT_ERR; + + /* Load C1 entries */ + i = SZDIRE * 2; /* C1 offset */ + do { + res = dir_next(dp, 0); + if (res != FR_OK) return res; + res = move_window(dp->obj.fs, dp->sect); + if (res != FR_OK) return res; + if (dp->dir[XDIR_Type] != 0xC1) return FR_INT_ERR; + if (i < MAXDIRB(_MAX_LFN)) mem_cpy(dirb + i, dp->dir, SZDIRE); + } while ((i += SZDIRE) < sz_ent); + + /* Sanity check (do it when accessible object name) */ + if (i <= MAXDIRB(_MAX_LFN)) { + if (xdir_sum(dirb) != ld_word(dirb + XDIR_SetSum)) return FR_INT_ERR; + } + return FR_OK; +} + + +#if !_FS_READONLY || _FS_RPATH != 0 +/*------------------------------------------------*/ +/* exFAT: Load the object's directory entry block */ +/*------------------------------------------------*/ +static +FRESULT load_obj_dir ( + DIR* dp, /* Blank directory object to be used to access containing direcotry */ + const _FDID* obj /* Object with its containing directory information */ +) +{ + FRESULT res; + + /* Open object containing directory */ + dp->obj.fs = obj->fs; + dp->obj.sclust = obj->c_scl; + dp->obj.stat = (BYTE)obj->c_size; + dp->obj.objsize = obj->c_size & 0xFFFFFF00; + dp->blk_ofs = obj->c_ofs; + + res = dir_sdi(dp, dp->blk_ofs); /* Goto object's entry block */ + if (res == FR_OK) { + res = load_xdir(dp); /* Load the object's entry block */ + } + return res; +} +#endif + + +#if !_FS_READONLY +/*-----------------------------------------------*/ +/* exFAT: Store the directory block to the media */ +/*-----------------------------------------------*/ +static +FRESULT store_xdir ( + DIR* dp /* Pointer to the direcotry object */ +) +{ + FRESULT res; + UINT nent; + BYTE* dirb = dp->obj.fs->dirbuf; /* Pointer to the direcotry entry block 85+C0+C1s */ + + /* Create set sum */ + st_word(dirb + XDIR_SetSum, xdir_sum(dirb)); + nent = dirb[XDIR_NumSec] + 1; + + /* Store the set of directory to the volume */ + res = dir_sdi(dp, dp->blk_ofs); + while (res == FR_OK) { + res = move_window(dp->obj.fs, dp->sect); + if (res != FR_OK) break; + mem_cpy(dp->dir, dirb, SZDIRE); + dp->obj.fs->wflag = 1; + if (--nent == 0) break; + dirb += SZDIRE; + res = dir_next(dp, 0); + } + return (res == FR_OK || res == FR_DISK_ERR) ? res : FR_INT_ERR; +} + + + +/*-------------------------------------------*/ +/* exFAT: Create a new directory enrty block */ +/*-------------------------------------------*/ + +static +void create_xdir ( + BYTE* dirb, /* Pointer to the direcotry entry block buffer */ + const WCHAR* lfn /* Pointer to the nul terminated file name */ +) +{ + UINT i; + BYTE nb, nc; + WCHAR chr; + + + /* Create 85+C0 entry */ + mem_set(dirb, 0, 2 * SZDIRE); + dirb[XDIR_Type] = 0x85; + dirb[XDIR_Type + SZDIRE] = 0xC0; + + /* Create C1 entries */ + nc = 0; nb = 1; chr = 1; i = SZDIRE * 2; + do { + dirb[i++] = 0xC1; dirb[i++] = 0; /* Entry type C1 */ + do { /* Fill name field */ + if (chr && (chr = lfn[nc]) != 0) nc++; /* Get a character if exist */ + st_word(dirb + i, chr); /* Store it */ + } while ((i += 2) % SZDIRE != 0); + nb++; + } while (lfn[nc]); /* Fill next entry if any char follows */ + + dirb[XDIR_NumName] = nc; /* Set name length */ + dirb[XDIR_NumSec] = nb; /* Set block length */ + st_word(dirb + XDIR_NameHash, xname_sum(lfn)); /* Set name hash */ +} + +#endif /* !_FS_READONLY */ +#endif /* _FS_EXFAT */ + + + +#if _FS_MINIMIZE <= 1 || _FS_RPATH >= 2 || _USE_LABEL || _FS_EXFAT +/*-----------------------------------------------------------------------*/ +/* Read an object from the directory */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT dir_read ( + DIR* dp, /* Pointer to the directory object */ + int vol /* Filtered by 0:file/directory or 1:volume label */ +) +{ + FRESULT res = FR_NO_FILE; + FATFS *fs = dp->obj.fs; + BYTE a, c; +#if _USE_LFN != 0 + BYTE ord = 0xFF, sum = 0xFF; +#endif + + while (dp->sect) { + res = move_window(fs, dp->sect); + if (res != FR_OK) break; + c = dp->dir[DIR_Name]; /* Test for the entry type */ + if (c == 0) { + res = FR_NO_FILE; break; /* Reached to end of the directory */ + } +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { /* On the exFAT volume */ + if (_USE_LABEL && vol) { + if (c == 0x83) break; /* Volume label entry? */ + } else { + if (c == 0x85) { /* Start of the file entry block? */ + dp->blk_ofs = dp->dptr; /* Get location of the block */ + res = load_xdir(dp); /* Load the entry block */ + if (res == FR_OK) { + dp->obj.attr = fs->dirbuf[XDIR_Attr] & AM_MASK; /* Get attribute */ + } + break; + } + } + } else +#endif + { /* On the FAT12/16/32 volume */ + dp->obj.attr = a = dp->dir[DIR_Attr] & AM_MASK; /* Get attribute */ +#if _USE_LFN != 0 /* LFN configuration */ + if (c == DDEM || c == '.' || (int)((a & ~AM_ARC) == AM_VOL) != vol) { /* An entry without valid data */ + ord = 0xFF; + } else { + if (a == AM_LFN) { /* An LFN entry is found */ + if (c & LLEF) { /* Is it start of an LFN sequence? */ + sum = dp->dir[LDIR_Chksum]; + c &= (BYTE)~LLEF; ord = c; + dp->blk_ofs = dp->dptr; + } + /* Check LFN validity and capture it */ + ord = (c == ord && sum == dp->dir[LDIR_Chksum] && pick_lfn(fs->lfnbuf, dp->dir)) ? ord - 1 : 0xFF; + } else { /* An SFN entry is found */ + if (ord || sum != sum_sfn(dp->dir)) { /* Is there a valid LFN? */ + dp->blk_ofs = 0xFFFFFFFF; /* It has no LFN. */ + } + break; + } + } +#else /* Non LFN configuration */ + if (c != DDEM && c != '.' && a != AM_LFN && (int)((a & ~AM_ARC) == AM_VOL) == vol) { /* Is it a valid entry? */ + break; + } +#endif + } + res = dir_next(dp, 0); /* Next entry */ + if (res != FR_OK) break; + } + + if (res != FR_OK) dp->sect = 0; /* Terminate the read operation on error or EOT */ + return res; +} + +#endif /* _FS_MINIMIZE <= 1 || _USE_LABEL || _FS_RPATH >= 2 */ + + + +/*-----------------------------------------------------------------------*/ +/* Directory handling - Find an object in the directory */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT dir_find ( /* FR_OK(0):succeeded, !=0:error */ + DIR* dp /* Pointer to the directory object with the file name */ +) +{ + FRESULT res; + FATFS *fs = dp->obj.fs; + BYTE c; +#if _USE_LFN != 0 + BYTE a, ord, sum; +#endif + + res = dir_sdi(dp, 0); /* Rewind directory object */ + if (res != FR_OK) return res; +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { /* On the exFAT volume */ + BYTE nc; + UINT di, ni; + WORD hash = xname_sum(fs->lfnbuf); /* Hash value of the name to find */ + + while ((res = dir_read(dp, 0)) == FR_OK) { /* Read an item */ +#if _MAX_LFN < 255 + if (fs->dirbuf[XDIR_NumName] > _MAX_LFN) continue; /* Skip comparison if inaccessible object name */ +#endif + if (ld_word(fs->dirbuf + XDIR_NameHash) != hash) continue; /* Skip comparison if hash mismatched */ + for (nc = fs->dirbuf[XDIR_NumName], di = SZDIRE * 2, ni = 0; nc; nc--, di += 2, ni++) { /* Compare the name */ + if ((di % SZDIRE) == 0) di += 2; + if (ff_wtoupper(ld_word(fs->dirbuf + di)) != ff_wtoupper(fs->lfnbuf[ni])) break; + } + if (nc == 0 && !fs->lfnbuf[ni]) break; /* Name matched? */ + } + return res; + } +#endif + /* On the FAT12/16/32 volume */ +#if _USE_LFN != 0 + ord = sum = 0xFF; dp->blk_ofs = 0xFFFFFFFF; /* Reset LFN sequence */ +#endif + do { + res = move_window(fs, dp->sect); + if (res != FR_OK) break; + c = dp->dir[DIR_Name]; + if (c == 0) { res = FR_NO_FILE; break; } /* Reached to end of table */ +#if _USE_LFN != 0 /* LFN configuration */ + dp->obj.attr = a = dp->dir[DIR_Attr] & AM_MASK; + if (c == DDEM || ((a & AM_VOL) && a != AM_LFN)) { /* An entry without valid data */ + ord = 0xFF; dp->blk_ofs = 0xFFFFFFFF; /* Reset LFN sequence */ + } else { + if (a == AM_LFN) { /* An LFN entry is found */ + if (!(dp->fn[NSFLAG] & NS_NOLFN)) { + if (c & LLEF) { /* Is it start of LFN sequence? */ + sum = dp->dir[LDIR_Chksum]; + c &= (BYTE)~LLEF; ord = c; /* LFN start order */ + dp->blk_ofs = dp->dptr; /* Start offset of LFN */ + } + /* Check validity of the LFN entry and compare it with given name */ + ord = (c == ord && sum == dp->dir[LDIR_Chksum] && cmp_lfn(fs->lfnbuf, dp->dir)) ? ord - 1 : 0xFF; + } + } else { /* An SFN entry is found */ + if (!ord && sum == sum_sfn(dp->dir)) break; /* LFN matched? */ + if (!(dp->fn[NSFLAG] & NS_LOSS) && !mem_cmp(dp->dir, dp->fn, 11)) break; /* SFN matched? */ + ord = 0xFF; dp->blk_ofs = 0xFFFFFFFF; /* Reset LFN sequence */ + } + } +#else /* Non LFN configuration */ + dp->obj.attr = dp->dir[DIR_Attr] & AM_MASK; + if (!(dp->dir[DIR_Attr] & AM_VOL) && !mem_cmp(dp->dir, dp->fn, 11)) break; /* Is it a valid entry? */ +#endif + res = dir_next(dp, 0); /* Next entry */ + } while (res == FR_OK); + + return res; +} + + + + +#if !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* Register an object to the directory */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT dir_register ( /* FR_OK:succeeded, FR_DENIED:no free entry or too many SFN collision, FR_DISK_ERR:disk error */ + DIR* dp /* Target directory with object name to be created */ +) +{ + FRESULT res; + FATFS *fs = dp->obj.fs; +#if _USE_LFN != 0 /* LFN configuration */ + UINT n, nlen, nent; + BYTE sn[12], sum; + + + if (dp->fn[NSFLAG] & (NS_DOT | NS_NONAME)) return FR_INVALID_NAME; /* Check name validity */ + for (nlen = 0; fs->lfnbuf[nlen]; nlen++) ; /* Get lfn length */ + +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { /* On the exFAT volume */ + DIR dj; + + nent = (nlen + 14) / 15 + 2; /* Number of entries to allocate (85+C0+C1s) */ + res = dir_alloc(dp, nent); /* Allocate entries */ + if (res != FR_OK) return res; + dp->blk_ofs = dp->dptr - SZDIRE * (nent - 1); /* Set the allocated entry block offset */ + + if (dp->obj.sclust != 0 && (dp->obj.stat & 4)) { /* Has the sub-directory been stretched? */ + dp->obj.objsize += (DWORD)fs->csize * SS(fs); /* Increase the directory size by cluster size */ + res = fill_first_frag(&dp->obj); /* Fill first fragment on the FAT if needed */ + if (res != FR_OK) return res; + res = fill_last_frag(&dp->obj, dp->clust, 0xFFFFFFFF); /* Fill last fragment on the FAT if needed */ + if (res != FR_OK) return res; + res = load_obj_dir(&dj, &dp->obj); /* Load the object status */ + if (res != FR_OK) return res; + st_qword(fs->dirbuf + XDIR_FileSize, dp->obj.objsize); /* Update the allocation status */ + st_qword(fs->dirbuf + XDIR_ValidFileSize, dp->obj.objsize); + fs->dirbuf[XDIR_GenFlags] = dp->obj.stat | 1; + res = store_xdir(&dj); /* Store the object status */ + if (res != FR_OK) return res; + } + + create_xdir(fs->dirbuf, fs->lfnbuf); /* Create on-memory directory block to be written later */ + return FR_OK; + } +#endif + /* On the FAT12/16/32 volume */ + mem_cpy(sn, dp->fn, 12); + if (sn[NSFLAG] & NS_LOSS) { /* When LFN is out of 8.3 format, generate a numbered name */ + dp->fn[NSFLAG] = NS_NOLFN; /* Find only SFN */ + for (n = 1; n < 100; n++) { + gen_numname(dp->fn, sn, fs->lfnbuf, n); /* Generate a numbered name */ + res = dir_find(dp); /* Check if the name collides with existing SFN */ + if (res != FR_OK) break; + } + if (n == 100) return FR_DENIED; /* Abort if too many collisions */ + if (res != FR_NO_FILE) return res; /* Abort if the result is other than 'not collided' */ + dp->fn[NSFLAG] = sn[NSFLAG]; + } + + /* Create an SFN with/without LFNs. */ + nent = (sn[NSFLAG] & NS_LFN) ? (nlen + 12) / 13 + 1 : 1; /* Number of entries to allocate */ + res = dir_alloc(dp, nent); /* Allocate entries */ + if (res == FR_OK && --nent) { /* Set LFN entry if needed */ + res = dir_sdi(dp, dp->dptr - nent * SZDIRE); + if (res == FR_OK) { + sum = sum_sfn(dp->fn); /* Checksum value of the SFN tied to the LFN */ + do { /* Store LFN entries in bottom first */ + res = move_window(fs, dp->sect); + if (res != FR_OK) break; + put_lfn(fs->lfnbuf, dp->dir, (BYTE)nent, sum); + fs->wflag = 1; + res = dir_next(dp, 0); /* Next entry */ + } while (res == FR_OK && --nent); + } + } + +#else /* Non LFN configuration */ + res = dir_alloc(dp, 1); /* Allocate an entry for SFN */ + +#endif + + /* Set SFN entry */ + if (res == FR_OK) { + res = move_window(fs, dp->sect); + if (res == FR_OK) { + mem_set(dp->dir, 0, SZDIRE); /* Clean the entry */ + mem_cpy(dp->dir + DIR_Name, dp->fn, 11); /* Put SFN */ +#if _USE_LFN != 0 + dp->dir[DIR_NTres] = dp->fn[NSFLAG] & (NS_BODY | NS_EXT); /* Put NT flag */ +#endif + fs->wflag = 1; + } + } + + return res; +} + +#endif /* !_FS_READONLY */ + + + +#if !_FS_READONLY && _FS_MINIMIZE == 0 +/*-----------------------------------------------------------------------*/ +/* Remove an object from the directory */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT dir_remove ( /* FR_OK:Succeeded, FR_DISK_ERR:A disk error */ + DIR* dp /* Directory object pointing the entry to be removed */ +) +{ + FRESULT res; + FATFS *fs = dp->obj.fs; +#if _USE_LFN != 0 /* LFN configuration */ + DWORD last = dp->dptr; + + res = (dp->blk_ofs == 0xFFFFFFFF) ? FR_OK : dir_sdi(dp, dp->blk_ofs); /* Goto top of the entry block if LFN is exist */ + if (res == FR_OK) { + do { + res = move_window(fs, dp->sect); + if (res != FR_OK) break; + /* Mark an entry 'deleted' */ + if (_FS_EXFAT && fs->fs_type == FS_EXFAT) { /* On the exFAT volume */ + dp->dir[XDIR_Type] &= 0x7F; + } else { /* On the FAT12/16/32 volume */ + dp->dir[DIR_Name] = DDEM; + } + fs->wflag = 1; + if (dp->dptr >= last) break; /* If reached last entry then all entries of the object has been deleted. */ + res = dir_next(dp, 0); /* Next entry */ + } while (res == FR_OK); + if (res == FR_NO_FILE) res = FR_INT_ERR; + } +#else /* Non LFN configuration */ + + res = move_window(fs, dp->sect); + if (res == FR_OK) { + dp->dir[DIR_Name] = DDEM; + fs->wflag = 1; + } +#endif + + return res; +} + +#endif /* !_FS_READONLY && _FS_MINIMIZE == 0 */ + + + +#if _FS_MINIMIZE <= 1 || _FS_RPATH >= 2 +/*-----------------------------------------------------------------------*/ +/* Get file information from directory entry */ +/*-----------------------------------------------------------------------*/ + +static +void get_fileinfo ( /* No return code */ + DIR* dp, /* Pointer to the directory object */ + FILINFO* fno /* Pointer to the file information to be filled */ +) +{ + UINT i, j; + TCHAR c; + DWORD tm; +#if _USE_LFN != 0 + WCHAR w, lfv; + FATFS *fs = dp->obj.fs; +#endif + + + fno->fname[0] = 0; /* Invaidate file info */ + if (!dp->sect) return; /* Exit if read pointer has reached end of directory */ + +#if _USE_LFN != 0 /* LFN configuration */ +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { /* On the exFAT volume */ + get_xdir_info(fs->dirbuf, fno); + return; + } else +#endif + { /* On the FAT12/16/32 volume */ + if (dp->blk_ofs != 0xFFFFFFFF) { /* Get LFN if available */ + i = j = 0; + while ((w = fs->lfnbuf[j++]) != 0) { /* Get an LFN character */ +#if !_LFN_UNICODE + w = ff_convert(w, 0); /* Unicode -> OEM */ + if (w == 0) { i = 0; break; } /* No LFN if it could not be converted */ + if (_DF1S && w >= 0x100) { /* Put 1st byte if it is a DBC (always false at SBCS cfg) */ + fno->fname[i++] = (char)(w >> 8); + } +#endif + if (i >= _MAX_LFN) { i = 0; break; } /* No LFN if buffer overflow */ + fno->fname[i++] = (TCHAR)w; + } + fno->fname[i] = 0; /* Terminate the LFN */ + } + } + + i = j = 0; + lfv = fno->fname[i]; /* LFN is exist if non-zero */ + while (i < 11) { /* Copy name body and extension */ + c = (TCHAR)dp->dir[i++]; + if (c == ' ') continue; /* Skip padding spaces */ + if (c == RDDEM) c = (TCHAR)DDEM; /* Restore replaced DDEM character */ + if (i == 9) { /* Insert a . if extension is exist */ + if (!lfv) fno->fname[j] = '.'; + fno->altname[j++] = '.'; + } +#if _LFN_UNICODE + if (IsDBCS1(c) && i != 8 && i != 11 && IsDBCS2(dp->dir[i])) { + c = c << 8 | dp->dir[i++]; + } + c = ff_convert(c, 1); /* OEM -> Unicode */ + if (!c) c = '?'; +#endif + fno->altname[j] = c; + if (!lfv) { + if (IsUpper(c) && (dp->dir[DIR_NTres] & ((i >= 9) ? NS_EXT : NS_BODY))) { + c += 0x20; /* To lower */ + } + fno->fname[j] = c; + } + j++; + } + if (!lfv) { + fno->fname[j] = 0; + if (!dp->dir[DIR_NTres]) j = 0; /* Altname is no longer needed if neither LFN nor case info is exist. */ + } + fno->altname[j] = 0; /* Terminate the SFN */ + +#else /* Non-LFN configuration */ + i = j = 0; + while (i < 11) { /* Copy name body and extension */ + c = (TCHAR)dp->dir[i++]; + if (c == ' ') continue; /* Skip padding spaces */ + if (c == RDDEM) c = (TCHAR)DDEM; /* Restore replaced DDEM character */ + if (i == 9) fno->fname[j++] = '.'; /* Insert a . if extension is exist */ + fno->fname[j++] = c; + } + fno->fname[j] = 0; +#endif + + fno->fattrib = dp->dir[DIR_Attr]; /* Attribute */ + fno->fsize = ld_dword(dp->dir + DIR_FileSize); /* Size */ + tm = ld_dword(dp->dir + DIR_ModTime); /* Timestamp */ + fno->ftime = (WORD)tm; fno->fdate = (WORD)(tm >> 16); +} + +#endif /* _FS_MINIMIZE <= 1 || _FS_RPATH >= 2 */ + + + +#if _USE_FIND && _FS_MINIMIZE <= 1 +/*-----------------------------------------------------------------------*/ +/* Pattern matching */ +/*-----------------------------------------------------------------------*/ + +static +WCHAR get_achar ( /* Get a character and advances ptr 1 or 2 */ + const TCHAR** ptr /* Pointer to pointer to the SBCS/DBCS/Unicode string */ +) +{ +#if !_LFN_UNICODE + WCHAR chr; + + chr = (BYTE)*(*ptr)++; /* Get a byte */ + if (IsLower(chr)) chr -= 0x20; /* To upper ASCII char */ +#ifdef _EXCVT + if (chr >= 0x80) chr = ExCvt[chr - 0x80]; /* To upper SBCS extended char */ +#else + if (IsDBCS1(chr) && IsDBCS2(**ptr)) { /* Get DBC 2nd byte if needed */ + chr = chr << 8 | (BYTE)*(*ptr)++; + } +#endif + return chr; +#else + return ff_wtoupper(*(*ptr)++); /* Get a word and to upper */ +#endif +} + + +static +int pattern_matching ( /* 0:not matched, 1:matched */ + const TCHAR* pat, /* Matching pattern */ + const TCHAR* nam, /* String to be tested */ + int skip, /* Number of pre-skip chars (number of ?s) */ + int inf /* Infinite search (* specified) */ +) +{ + const TCHAR *pp, *np; + WCHAR pc, nc; + int nm, nx; + + + while (skip--) { /* Pre-skip name chars */ + if (!get_achar(&nam)) return 0; /* Branch mismatched if less name chars */ + } + if (!*pat && inf) return 1; /* (short circuit) */ + + do { + pp = pat; np = nam; /* Top of pattern and name to match */ + for (;;) { + if (*pp == '?' || *pp == '*') { /* Wildcard? */ + nm = nx = 0; + do { /* Analyze the wildcard chars */ + if (*pp++ == '?') nm++; else nx = 1; + } while (*pp == '?' || *pp == '*'); + if (pattern_matching(pp, np, nm, nx)) return 1; /* Test new branch (recurs upto number of wildcard blocks in the pattern) */ + nc = *np; break; /* Branch mismatched */ + } + pc = get_achar(&pp); /* Get a pattern char */ + nc = get_achar(&np); /* Get a name char */ + if (pc != nc) break; /* Branch mismatched? */ + if (pc == 0) return 1; /* Branch matched? (matched at end of both strings) */ + } + get_achar(&nam); /* nam++ */ + } while (inf && nc); /* Retry until end of name if infinite search is specified */ + + return 0; +} + +#endif /* _USE_FIND && _FS_MINIMIZE <= 1 */ + + + +/*-----------------------------------------------------------------------*/ +/* Pick a top segment and create the object name in directory form */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT create_name ( /* FR_OK: successful, FR_INVALID_NAME: could not create */ + DIR* dp, /* Pointer to the directory object */ + const TCHAR** path /* Pointer to pointer to the segment in the path string */ +) +{ +#if _USE_LFN != 0 /* LFN configuration */ + BYTE b, cf; + WCHAR w, *lfn; + UINT i, ni, si, di; + const TCHAR *p; + + /* Create LFN in Unicode */ + p = *path; lfn = dp->obj.fs->lfnbuf; si = di = 0; + for (;;) { + w = p[si++]; /* Get a character */ + if (w < ' ') break; /* Break if end of the path name */ + if (w == '/' || w == '\\') { /* Break if a separator is found */ + while (p[si] == '/' || p[si] == '\\') si++; /* Skip duplicated separator if exist */ + break; + } + if (di >= _MAX_LFN) return FR_INVALID_NAME; /* Reject too long name */ +#if !_LFN_UNICODE + w &= 0xFF; + if (IsDBCS1(w)) { /* Check if it is a DBC 1st byte (always false on SBCS cfg) */ + b = (BYTE)p[si++]; /* Get 2nd byte */ + w = (w << 8) + b; /* Create a DBC */ + if (!IsDBCS2(b)) return FR_INVALID_NAME; /* Reject invalid sequence */ + } + w = ff_convert(w, 1); /* Convert ANSI/OEM to Unicode */ + if (!w) return FR_INVALID_NAME; /* Reject invalid code */ +#endif + if (w < 0x80 && chk_chr("\"*:<>\?|\x7F", w)) return FR_INVALID_NAME; /* Reject illegal characters for LFN */ + lfn[di++] = w; /* Store the Unicode character */ + } + *path = &p[si]; /* Return pointer to the next segment */ + cf = (w < ' ') ? NS_LAST : 0; /* Set last segment flag if end of the path */ +#if _FS_RPATH != 0 + if ((di == 1 && lfn[di - 1] == '.') || + (di == 2 && lfn[di - 1] == '.' && lfn[di - 2] == '.')) { /* Is this segment a dot name? */ + lfn[di] = 0; + for (i = 0; i < 11; i++) /* Create dot name for SFN entry */ + dp->fn[i] = (i < di) ? '.' : ' '; + dp->fn[i] = cf | NS_DOT; /* This is a dot entry */ + return FR_OK; + } +#endif + while (di) { /* Snip off trailing spaces and dots if exist */ + w = lfn[di - 1]; + if (w != ' ' && w != '.') break; + di--; + } + lfn[di] = 0; /* LFN is created */ + if (di == 0) return FR_INVALID_NAME; /* Reject nul name */ + + /* Create SFN in directory form */ + mem_set(dp->fn, ' ', 11); + for (si = 0; lfn[si] == ' ' || lfn[si] == '.'; si++) ; /* Strip leading spaces and dots */ + if (si) cf |= NS_LOSS | NS_LFN; + while (di && lfn[di - 1] != '.') di--; /* Find extension (di<=si: no extension) */ + + i = b = 0; ni = 8; + for (;;) { + w = lfn[si++]; /* Get an LFN character */ + if (!w) break; /* Break on end of the LFN */ + if (w == ' ' || (w == '.' && si != di)) { /* Remove spaces and dots */ + cf |= NS_LOSS | NS_LFN; continue; + } + + if (i >= ni || si == di) { /* Extension or end of SFN */ + if (ni == 11) { /* Long extension */ + cf |= NS_LOSS | NS_LFN; break; + } + if (si != di) cf |= NS_LOSS | NS_LFN; /* Out of 8.3 format */ + if (si > di) break; /* No extension */ + si = di; i = 8; ni = 11; /* Enter extension section */ + b <<= 2; continue; + } + + if (w >= 0x80) { /* Non ASCII character */ +#ifdef _EXCVT + w = ff_convert(w, 0); /* Unicode -> OEM code */ + if (w) w = ExCvt[w - 0x80]; /* Convert extended character to upper (SBCS) */ +#else + w = ff_convert(ff_wtoupper(w), 0); /* Upper converted Unicode -> OEM code */ +#endif + cf |= NS_LFN; /* Force create LFN entry */ + } + + if (_DF1S && w >= 0x100) { /* Is this DBC? (always false at SBCS cfg) */ + if (i >= ni - 1) { + cf |= NS_LOSS | NS_LFN; i = ni; continue; + } + dp->fn[i++] = (BYTE)(w >> 8); + } else { /* SBC */ + if (!w || chk_chr("+,;=[]", w)) { /* Replace illegal characters for SFN */ + w = '_'; cf |= NS_LOSS | NS_LFN;/* Lossy conversion */ + } else { + if (IsUpper(w)) { /* ASCII large capital */ + b |= 2; + } else { + if (IsLower(w)) { /* ASCII small capital */ + b |= 1; w -= 0x20; + } + } + } + } + dp->fn[i++] = (BYTE)w; + } + + if (dp->fn[0] == DDEM) dp->fn[0] = RDDEM; /* If the first character collides with DDEM, replace it with RDDEM */ + + if (ni == 8) b <<= 2; + if ((b & 0x0C) == 0x0C || (b & 0x03) == 0x03) cf |= NS_LFN; /* Create LFN entry when there are composite capitals */ + if (!(cf & NS_LFN)) { /* When LFN is in 8.3 format without extended character, NT flags are created */ + if ((b & 0x03) == 0x01) cf |= NS_EXT; /* NT flag (Extension has only small capital) */ + if ((b & 0x0C) == 0x04) cf |= NS_BODY; /* NT flag (Filename has only small capital) */ + } + + dp->fn[NSFLAG] = cf; /* SFN is created */ + + return FR_OK; + + +#else /* _USE_LFN != 0 : Non-LFN configuration */ + BYTE c, d, *sfn; + UINT ni, si, i; + const char *p; + + /* Create file name in directory form */ + p = *path; sfn = dp->fn; + mem_set(sfn, ' ', 11); + si = i = 0; ni = 8; +#if _FS_RPATH != 0 + if (p[si] == '.') { /* Is this a dot entry? */ + for (;;) { + c = (BYTE)p[si++]; + if (c != '.' || si >= 3) break; + sfn[i++] = c; + } + if (c != '/' && c != '\\' && c > ' ') return FR_INVALID_NAME; + *path = p + si; /* Return pointer to the next segment */ + sfn[NSFLAG] = (c <= ' ') ? NS_LAST | NS_DOT : NS_DOT; /* Set last segment flag if end of the path */ + return FR_OK; + } +#endif + for (;;) { + c = (BYTE)p[si++]; + if (c <= ' ') break; /* Break if end of the path name */ + if (c == '/' || c == '\\') { /* Break if a separator is found */ + while (p[si] == '/' || p[si] == '\\') si++; /* Skip duplicated separator if exist */ + break; + } + if (c == '.' || i >= ni) { /* End of body or over size? */ + if (ni == 11 || c != '.') return FR_INVALID_NAME; /* Over size or invalid dot */ + i = 8; ni = 11; /* Goto extension */ + continue; + } + if (c >= 0x80) { /* Extended character? */ +#ifdef _EXCVT + c = ExCvt[c - 0x80]; /* To upper extended characters (SBCS cfg) */ +#else +#if !_DF1S + return FR_INVALID_NAME; /* Reject extended characters (ASCII only cfg) */ +#endif +#endif + } + if (IsDBCS1(c)) { /* Check if it is a DBC 1st byte (always false at SBCS cfg.) */ + d = (BYTE)p[si++]; /* Get 2nd byte */ + if (!IsDBCS2(d) || i >= ni - 1) return FR_INVALID_NAME; /* Reject invalid DBC */ + sfn[i++] = c; + sfn[i++] = d; + } else { /* SBC */ + if (chk_chr("\"*+,:;<=>\?[]|\x7F", c)) return FR_INVALID_NAME; /* Reject illegal chrs for SFN */ + if (IsLower(c)) c -= 0x20; /* To upper */ + sfn[i++] = c; + } + } + *path = p + si; /* Return pointer to the next segment */ + if (i == 0) return FR_INVALID_NAME; /* Reject nul string */ + + if (sfn[0] == DDEM) sfn[0] = RDDEM; /* If the first character collides with DDEM, replace it with RDDEM */ + sfn[NSFLAG] = (c <= ' ') ? NS_LAST : 0; /* Set last segment flag if end of the path */ + + return FR_OK; +#endif /* _USE_LFN != 0 */ +} + + + + +/*-----------------------------------------------------------------------*/ +/* Follow a file path */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT follow_path ( /* FR_OK(0): successful, !=0: error code */ + DIR* dp, /* Directory object to return last directory and found object */ + const TCHAR* path /* Full-path string to find a file or directory */ +) +{ + FRESULT res; + BYTE ns; + _FDID *obj = &dp->obj; + FATFS *fs = obj->fs; + + +#if _FS_RPATH != 0 + if (*path != '/' && *path != '\\') { /* Without heading separator */ + obj->sclust = fs->cdir; /* Start from current directory */ + } else +#endif + { /* With heading separator */ + while (*path == '/' || *path == '\\') path++; /* Strip heading separator */ + obj->sclust = 0; /* Start from root directory */ + } +#if _FS_EXFAT + obj->n_frag = 0; /* Invalidate last fragment counter of the object */ +#if _FS_RPATH != 0 + if (fs->fs_type == FS_EXFAT && obj->sclust) { /* Retrieve the sub-directory status if needed */ + DIR dj; + + obj->c_scl = fs->cdc_scl; + obj->c_size = fs->cdc_size; + obj->c_ofs = fs->cdc_ofs; + res = load_obj_dir(&dj, obj); + if (res != FR_OK) return res; + obj->objsize = ld_dword(fs->dirbuf + XDIR_FileSize); + obj->stat = fs->dirbuf[XDIR_GenFlags] & 2; + } +#endif +#endif + + if ((UINT)*path < ' ') { /* Null path name is the origin directory itself */ + dp->fn[NSFLAG] = NS_NONAME; + res = dir_sdi(dp, 0); + + } else { /* Follow path */ + for (;;) { + res = create_name(dp, &path); /* Get a segment name of the path */ + if (res != FR_OK) break; + res = dir_find(dp); /* Find an object with the segment name */ + ns = dp->fn[NSFLAG]; + if (res != FR_OK) { /* Failed to find the object */ + if (res == FR_NO_FILE) { /* Object is not found */ + if (_FS_RPATH && (ns & NS_DOT)) { /* If dot entry is not exist, stay there */ + if (!(ns & NS_LAST)) continue; /* Continue to follow if not last segment */ + dp->fn[NSFLAG] = NS_NONAME; + res = FR_OK; + } else { /* Could not find the object */ + if (!(ns & NS_LAST)) res = FR_NO_PATH; /* Adjust error code if not last segment */ + } + } + break; + } + if (ns & NS_LAST) break; /* Last segment matched. Function completed. */ + /* Get into the sub-directory */ + if (!(obj->attr & AM_DIR)) { /* It is not a sub-directory and cannot follow */ + res = FR_NO_PATH; break; + } +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { /* Save containing directory information for next dir */ + obj->c_scl = obj->sclust; + obj->c_size = ((DWORD)obj->objsize & 0xFFFFFF00) | obj->stat; + obj->c_ofs = dp->blk_ofs; + obj->sclust = ld_dword(fs->dirbuf + XDIR_FstClus); /* Open next directory */ + obj->stat = fs->dirbuf[XDIR_GenFlags] & 2; + obj->objsize = ld_qword(fs->dirbuf + XDIR_FileSize); + } else +#endif + { + obj->sclust = ld_clust(fs, fs->win + dp->dptr % SS(fs)); /* Open next directory */ + } + } + } + + return res; +} + + + + +/*-----------------------------------------------------------------------*/ +/* Get logical drive number from path name */ +/*-----------------------------------------------------------------------*/ + +static +int get_ldnumber ( /* Returns logical drive number (-1:invalid drive) */ + const TCHAR** path /* Pointer to pointer to the path name */ +) +{ + const TCHAR *tp, *tt; + UINT i; + int vol = -1; +#if _STR_VOLUME_ID /* Find string drive id */ + static const char* const volid[] = {_VOLUME_STRS}; + const char *sp; + char c; + TCHAR tc; +#endif + + + if (*path) { /* If the pointer is not a null */ + for (tt = *path; (UINT)*tt >= (_USE_LFN ? ' ' : '!') && *tt != ':'; tt++) ; /* Find ':' in the path */ + if (*tt == ':') { /* If a ':' is exist in the path name */ + tp = *path; + i = *tp++ - '0'; + if (i < 10 && tp == tt) { /* Is there a numeric drive id? */ + if (i < _VOLUMES) { /* If a drive id is found, get the value and strip it */ + vol = (int)i; + *path = ++tt; + } + } +#if _STR_VOLUME_ID + else { /* No numeric drive number, find string drive id */ + i = 0; tt++; + do { + sp = volid[i]; tp = *path; + do { /* Compare a string drive id with path name */ + c = *sp++; tc = *tp++; + if (IsLower(tc)) tc -= 0x20; + } while (c && (TCHAR)c == tc); + } while ((c || tp != tt) && ++i < _VOLUMES); /* Repeat for each id until pattern match */ + if (i < _VOLUMES) { /* If a drive id is found, get the value and strip it */ + vol = (int)i; + *path = tt; + } + } +#endif + return vol; + } +#if _FS_RPATH != 0 && _VOLUMES >= 2 + vol = CurrVol; /* Current drive */ +#else + vol = 0; /* Drive 0 */ +#endif + } + return vol; +} + + + + +/*-----------------------------------------------------------------------*/ +/* Load a sector and check if it is an FAT boot sector */ +/*-----------------------------------------------------------------------*/ + +static +BYTE check_fs ( /* 0:FAT, 1:exFAT, 2:Valid BS but not FAT, 3:Not a BS, 4:Disk error */ + FATFS* fs, /* File system object */ + DWORD sect /* Sector# (lba) to load and check if it is an FAT-VBR or not */ +) +{ + fs->wflag = 0; fs->winsect = 0xFFFFFFFF; /* Invaidate window */ + if (move_window(fs, sect) != FR_OK) return 4; /* Load boot record */ + + if (ld_word(fs->win + BS_55AA) != 0xAA55) return 3; /* Check boot record signature (always placed here even if the sector size is >512) */ + + if (fs->win[BS_JmpBoot] == 0xE9 || (fs->win[BS_JmpBoot] == 0xEB && fs->win[BS_JmpBoot + 2] == 0x90)) { + if ((ld_dword(fs->win + BS_FilSysType) & 0xFFFFFF) == 0x544146) return 0; /* Check "FAT" string */ + if (ld_dword(fs->win + BS_FilSysType32) == 0x33544146) return 0; /* Check "FAT3" string */ + } +#if _FS_EXFAT + if (!mem_cmp(fs->win + BS_JmpBoot, "\xEB\x76\x90" "EXFAT ", 11)) return 1; +#endif + return 2; +} + + + + +/*-----------------------------------------------------------------------*/ +/* Find logical drive and check if the volume is mounted */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT find_volume ( /* FR_OK(0): successful, !=0: any error occurred */ + const TCHAR** path, /* Pointer to pointer to the path name (drive number) */ + FATFS** rfs, /* Pointer to pointer to the found file system object */ + BYTE mode /* !=0: Check write protection for write access */ +) +{ + BYTE fmt, *pt; + int vol; + DSTATUS stat; + DWORD bsect, fasize, tsect, sysect, nclst, szbfat, br[4]; + WORD nrsv; + FATFS *fs; + UINT i; + + + /* Get logical drive number */ + *rfs = 0; + vol = get_ldnumber(path); + if (vol < 0) return FR_INVALID_DRIVE; + + /* Check if the file system object is valid or not */ + fs = FatFs[vol]; /* Get pointer to the file system object */ + if (!fs) return FR_NOT_ENABLED; /* Is the file system object available? */ + + ENTER_FF(fs); /* Lock the volume */ + *rfs = fs; /* Return pointer to the file system object */ + + mode &= (BYTE)~FA_READ; /* Desired access mode, write access or not */ + if (fs->fs_type) { /* If the volume has been mounted */ + stat = disk_status(fs->drv); + if (!(stat & STA_NOINIT)) { /* and the physical drive is kept initialized */ + if (!_FS_READONLY && mode && (stat & STA_PROTECT)) { /* Check write protection if needed */ + return FR_WRITE_PROTECTED; + } + return FR_OK; /* The file system object is valid */ + } + } + + /* The file system object is not valid. */ + /* Following code attempts to mount the volume. (analyze BPB and initialize the fs object) */ + + fs->fs_type = 0; /* Clear the file system object */ + fs->drv = LD2PD(vol); /* Bind the logical drive and a physical drive */ + stat = disk_initialize(fs->drv); /* Initialize the physical drive */ + if (stat & STA_NOINIT) { /* Check if the initialization succeeded */ + return FR_NOT_READY; /* Failed to initialize due to no medium or hard error */ + } + if (!_FS_READONLY && mode && (stat & STA_PROTECT)) { /* Check disk write protection if needed */ + return FR_WRITE_PROTECTED; + } +#if _MAX_SS != _MIN_SS /* Get sector size (multiple sector size cfg only) */ + if (disk_ioctl(fs->drv, GET_SECTOR_SIZE, &SS(fs)) != RES_OK) return FR_DISK_ERR; + if (SS(fs) > _MAX_SS || SS(fs) < _MIN_SS || (SS(fs) & (SS(fs) - 1))) return FR_DISK_ERR; +#endif + + /* Find an FAT partition on the drive. Supports only generic partitioning rules, FDISK and SFD. */ + bsect = 0; + fmt = check_fs(fs, bsect); /* Load sector 0 and check if it is an FAT-VBR as SFD */ + if (fmt == 2 || (fmt < 2 && LD2PT(vol) != 0)) { /* Not an FAT-VBR or forced partition number */ + for (i = 0; i < 4; i++) { /* Get partition offset */ + pt = fs->win + (MBR_Table + i * SZ_PTE); + br[i] = pt[PTE_System] ? ld_dword(pt + PTE_StLba) : 0; + } + i = LD2PT(vol); /* Partition number: 0:auto, 1-4:forced */ + if (i) i--; + do { /* Find an FAT volume */ + bsect = br[i]; + fmt = bsect ? check_fs(fs, bsect) : 3; /* Check the partition */ + } while (LD2PT(vol) == 0 && fmt >= 2 && ++i < 4); + } + if (fmt == 4) return FR_DISK_ERR; /* An error occured in the disk I/O layer */ + if (fmt >= 2) return FR_NO_FILESYSTEM; /* No FAT volume is found */ + + /* An FAT volume is found (bsect). Following code initializes the file system object */ + +#if _FS_EXFAT + if (fmt == 1) { + QWORD maxlba; + + for (i = BPB_ZeroedEx; i < BPB_ZeroedEx + 53 && fs->win[i] == 0; i++) ; /* Check zero filler */ + if (i < BPB_ZeroedEx + 53) return FR_NO_FILESYSTEM; + + if (ld_word(fs->win + BPB_FSVerEx) != 0x100) return FR_NO_FILESYSTEM; /* Check exFAT revision (Must be 1.0) */ + + if (1 << fs->win[BPB_BytsPerSecEx] != SS(fs)) { /* (BPB_BytsPerSecEx must be equal to the physical sector size) */ + return FR_NO_FILESYSTEM; + } + + maxlba = ld_qword(fs->win + BPB_TotSecEx) + bsect; /* Last LBA + 1 of the volume */ + if (maxlba >= 0x100000000) return FR_NO_FILESYSTEM; /* (It cannot be handled in 32-bit LBA) */ + + fs->fsize = ld_dword(fs->win + BPB_FatSzEx); /* Number of sectors per FAT */ + + fs->n_fats = fs->win[BPB_NumFATsEx]; /* Number of FATs */ + if (fs->n_fats != 1) return FR_NO_FILESYSTEM; /* (Supports only 1 FAT) */ + + fs->csize = 1 << fs->win[BPB_SecPerClusEx]; /* Cluster size */ + if (fs->csize == 0) return FR_NO_FILESYSTEM; /* (Must be 1..32768) */ + + nclst = ld_dword(fs->win + BPB_NumClusEx); /* Number of clusters */ + if (nclst > MAX_EXFAT) return FR_NO_FILESYSTEM; /* (Too many clusters) */ + fs->n_fatent = nclst + 2; + + /* Boundaries and Limits */ + fs->volbase = bsect; + fs->database = bsect + ld_dword(fs->win + BPB_DataOfsEx); + fs->fatbase = bsect + ld_dword(fs->win + BPB_FatOfsEx); + if (maxlba < (QWORD)fs->database + nclst * fs->csize) return FR_NO_FILESYSTEM; /* (Volume size must not be smaller than the size requiered) */ + fs->dirbase = ld_dword(fs->win + BPB_RootClusEx); + + /* Check if bitmap location is in assumption (at the first cluster) */ + if (move_window(fs, clust2sect(fs, fs->dirbase)) != FR_OK) return FR_DISK_ERR; + for (i = 0; i < SS(fs); i += SZDIRE) { + if (fs->win[i] == 0x81 && ld_dword(fs->win + i + 20) == 2) break; /* 81 entry with cluster #2? */ + } + if (i == SS(fs)) return FR_NO_FILESYSTEM; +#if !_FS_READONLY + fs->last_clst = fs->free_clst = 0xFFFFFFFF; /* Initialize cluster allocation information */ +#endif + fmt = FS_EXFAT; /* FAT sub-type */ + } else +#endif /* _FS_EXFAT */ + { + if (ld_word(fs->win + BPB_BytsPerSec) != SS(fs)) return FR_NO_FILESYSTEM; /* (BPB_BytsPerSec must be equal to the physical sector size) */ + + fasize = ld_word(fs->win + BPB_FATSz16); /* Number of sectors per FAT */ + if (fasize == 0) fasize = ld_dword(fs->win + BPB_FATSz32); + fs->fsize = fasize; + + fs->n_fats = fs->win[BPB_NumFATs]; /* Number of FATs */ + if (fs->n_fats != 1 && fs->n_fats != 2) return FR_NO_FILESYSTEM; /* (Must be 1 or 2) */ + fasize *= fs->n_fats; /* Number of sectors for FAT area */ + + fs->csize = fs->win[BPB_SecPerClus]; /* Cluster size */ + if (fs->csize == 0 || (fs->csize & (fs->csize - 1))) return FR_NO_FILESYSTEM; /* (Must be power of 2) */ + + fs->n_rootdir = ld_word(fs->win + BPB_RootEntCnt); /* Number of root directory entries */ + if (fs->n_rootdir % (SS(fs) / SZDIRE)) return FR_NO_FILESYSTEM; /* (Must be sector aligned) */ + + tsect = ld_word(fs->win + BPB_TotSec16); /* Number of sectors on the volume */ + if (tsect == 0) tsect = ld_dword(fs->win + BPB_TotSec32); + + nrsv = ld_word(fs->win + BPB_RsvdSecCnt); /* Number of reserved sectors */ + if (nrsv == 0) return FR_NO_FILESYSTEM; /* (Must not be 0) */ + + /* Determine the FAT sub type */ + sysect = nrsv + fasize + fs->n_rootdir / (SS(fs) / SZDIRE); /* RSV + FAT + DIR */ + if (tsect < sysect) return FR_NO_FILESYSTEM; /* (Invalid volume size) */ + nclst = (tsect - sysect) / fs->csize; /* Number of clusters */ + if (nclst == 0) return FR_NO_FILESYSTEM; /* (Invalid volume size) */ + fmt = FS_FAT32; + if (nclst <= MAX_FAT16) fmt = FS_FAT16; + if (nclst <= MAX_FAT12) fmt = FS_FAT12; + + /* Boundaries and Limits */ + fs->n_fatent = nclst + 2; /* Number of FAT entries */ + fs->volbase = bsect; /* Volume start sector */ + fs->fatbase = bsect + nrsv; /* FAT start sector */ + fs->database = bsect + sysect; /* Data start sector */ + if (fmt == FS_FAT32) { + if (ld_word(fs->win + BPB_FSVer32) != 0) return FR_NO_FILESYSTEM; /* (Must be FAT32 revision 0.0) */ + if (fs->n_rootdir) return FR_NO_FILESYSTEM; /* (BPB_RootEntCnt must be 0) */ + fs->dirbase = ld_dword(fs->win + BPB_RootClus32); /* Root directory start cluster */ + szbfat = fs->n_fatent * 4; /* (Needed FAT size) */ + } else { + if (fs->n_rootdir == 0) return FR_NO_FILESYSTEM;/* (BPB_RootEntCnt must not be 0) */ + fs->dirbase = fs->fatbase + fasize; /* Root directory start sector */ + szbfat = (fmt == FS_FAT16) ? /* (Needed FAT size) */ + fs->n_fatent * 2 : fs->n_fatent * 3 / 2 + (fs->n_fatent & 1); + } + if (fs->fsize < (szbfat + (SS(fs) - 1)) / SS(fs)) return FR_NO_FILESYSTEM; /* (BPB_FATSz must not be less than the size needed) */ + +#if !_FS_READONLY + /* Get FSINFO if available */ + fs->last_clst = fs->free_clst = 0xFFFFFFFF; /* Initialize cluster allocation information */ + fs->fsi_flag = 0x80; +#if (_FS_NOFSINFO & 3) != 3 + if (fmt == FS_FAT32 /* Enable FSINFO only if FAT32 and BPB_FSInfo32 == 1 */ + && ld_word(fs->win + BPB_FSInfo32) == 1 + && move_window(fs, bsect + 1) == FR_OK) + { + fs->fsi_flag = 0; + if (ld_word(fs->win + BS_55AA) == 0xAA55 /* Load FSINFO data if available */ + && ld_dword(fs->win + FSI_LeadSig) == 0x41615252 + && ld_dword(fs->win + FSI_StrucSig) == 0x61417272) + { +#if (_FS_NOFSINFO & 1) == 0 + fs->free_clst = ld_dword(fs->win + FSI_Free_Count); +#endif +#if (_FS_NOFSINFO & 2) == 0 + fs->last_clst = ld_dword(fs->win + FSI_Nxt_Free); +#endif + } + } +#endif /* (_FS_NOFSINFO & 3) != 3 */ +#endif /* !_FS_READONLY */ + } + + fs->fs_type = fmt; /* FAT sub-type */ + fs->id = ++Fsid; /* File system mount ID */ +#if _USE_LFN == 1 + fs->lfnbuf = LfnBuf; /* Static LFN working buffer */ +#if _FS_EXFAT + fs->dirbuf = DirBuf; /* Static directory block scratchpad buuffer */ +#endif +#endif +#if _FS_RPATH != 0 + fs->cdir = 0; /* Initialize current directory */ +#endif +#if _FS_LOCK != 0 /* Clear file lock semaphores */ + clear_lock(fs); +#endif + return FR_OK; +} + + + + +/*-----------------------------------------------------------------------*/ +/* Check if the file/directory object is valid or not */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT validate ( /* Returns FR_OK or FR_INVALID_OBJECT */ + _FDID* obj, /* Pointer to the _OBJ, the 1st member in the FIL/DIR object, to check validity */ + FATFS** fs /* Pointer to pointer to the owner file system object to return */ +) +{ + FRESULT res = FR_INVALID_OBJECT; + + + if (obj && obj->fs && obj->fs->fs_type && obj->id == obj->fs->id) { /* Test if the object is valid */ +#if _FS_REENTRANT + if (lock_fs(obj->fs)) { /* Obtain the filesystem object */ + if (!(disk_status(obj->fs->drv) & STA_NOINIT)) { /* Test if the phsical drive is kept initialized */ + res = FR_OK; + } else { + unlock_fs(obj->fs, FR_OK); + } + } else { + res = FR_TIMEOUT; + } +#else + if (!(disk_status(obj->fs->drv) & STA_NOINIT)) { /* Test if the phsical drive is kept initialized */ + res = FR_OK; + } +#endif + } + *fs = (res == FR_OK) ? obj->fs : 0; /* Corresponding filesystem object */ + return res; +} + + + + +/*--------------------------------------------------------------------------- + + Public Functions (FatFs API) + +----------------------------------------------------------------------------*/ + + + +/*-----------------------------------------------------------------------*/ +/* Mount/Unmount a Logical Drive */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_mount ( + FATFS* fs, /* Pointer to the file system object (NULL:unmount)*/ + const TCHAR* path, /* Logical drive number to be mounted/unmounted */ + BYTE opt /* Mode option 0:Do not mount (delayed mount), 1:Mount immediately */ +) +{ + FATFS *cfs; + int vol; + FRESULT res; + const TCHAR *rp = path; + + + /* Get logical drive number */ + vol = get_ldnumber(&rp); + if (vol < 0) return FR_INVALID_DRIVE; + cfs = FatFs[vol]; /* Pointer to fs object */ + + if (cfs) { +#if _FS_LOCK != 0 + clear_lock(cfs); +#endif +#if _FS_REENTRANT /* Discard sync object of the current volume */ + if (!ff_del_syncobj(cfs->sobj)) return FR_INT_ERR; +#endif + cfs->fs_type = 0; /* Clear old fs object */ + } + + if (fs) { + fs->fs_type = 0; /* Clear new fs object */ +#if _FS_REENTRANT /* Create sync object for the new volume */ + if (!ff_cre_syncobj((BYTE)vol, &fs->sobj)) return FR_INT_ERR; +#endif + } + FatFs[vol] = fs; /* Register new fs object */ + + if (!fs || opt != 1) return FR_OK; /* Do not mount now, it will be mounted later */ + + res = find_volume(&path, &fs, 0); /* Force mounted the volume */ + LEAVE_FF(fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Open or Create a File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_open ( + FIL* fp, /* Pointer to the blank file object */ + const TCHAR* path, /* Pointer to the file name */ + BYTE mode /* Access mode and file open mode flags */ +) +{ + FRESULT res; + DIR dj; + FATFS *fs; +#if !_FS_READONLY + DWORD dw, cl, bcs, clst, sc; + FSIZE_t ofs; +#endif + DEF_NAMBUF + + + if (!fp) return FR_INVALID_OBJECT; + + /* Get logical drive */ + mode &= _FS_READONLY ? FA_READ : FA_READ | FA_WRITE | FA_CREATE_ALWAYS | FA_CREATE_NEW | FA_OPEN_ALWAYS | FA_OPEN_APPEND | FA_SEEKEND; + res = find_volume(&path, &fs, mode); + if (res == FR_OK) { + dj.obj.fs = fs; + INIT_NAMBUF(fs); + res = follow_path(&dj, path); /* Follow the file path */ +#if !_FS_READONLY /* R/W configuration */ + if (res == FR_OK) { + if (dj.fn[NSFLAG] & NS_NONAME) { /* Origin directory itself? */ + res = FR_INVALID_NAME; + } +#if _FS_LOCK != 0 + else { + res = chk_lock(&dj, (mode & ~FA_READ) ? 1 : 0); + } +#endif + } + /* Create or Open a file */ + if (mode & (FA_CREATE_ALWAYS | FA_OPEN_ALWAYS | FA_CREATE_NEW)) { + if (res != FR_OK) { /* No file, create new */ + if (res == FR_NO_FILE) { /* There is no file to open, create a new entry */ +#if _FS_LOCK != 0 + res = enq_lock() ? dir_register(&dj) : FR_TOO_MANY_OPEN_FILES; +#else + res = dir_register(&dj); +#endif + } + mode |= FA_CREATE_ALWAYS; /* File is created */ + } + else { /* Any object is already existing */ + if (dj.obj.attr & (AM_RDO | AM_DIR)) { /* Cannot overwrite it (R/O or DIR) */ + res = FR_DENIED; + } else { + if (mode & FA_CREATE_NEW) res = FR_EXIST; /* Cannot create as new file */ + } + } + if (res == FR_OK && (mode & FA_CREATE_ALWAYS)) { /* Truncate it if overwrite mode */ + dw = GET_FATTIME(); +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + /* Get current allocation info */ + fp->obj.fs = fs; + fp->obj.sclust = ld_dword(fs->dirbuf + XDIR_FstClus); + fp->obj.objsize = ld_qword(fs->dirbuf + XDIR_FileSize); + fp->obj.stat = fs->dirbuf[XDIR_GenFlags] & 2; + fp->obj.n_frag = 0; + /* Initialize directory entry block */ + st_dword(fs->dirbuf + XDIR_CrtTime, dw); /* Set created time */ + fs->dirbuf[XDIR_CrtTime10] = 0; + st_dword(fs->dirbuf + XDIR_ModTime, dw); /* Set modified time */ + fs->dirbuf[XDIR_ModTime10] = 0; + fs->dirbuf[XDIR_Attr] = AM_ARC; /* Reset attribute */ + st_dword(fs->dirbuf + XDIR_FstClus, 0); /* Reset file allocation info */ + st_qword(fs->dirbuf + XDIR_FileSize, 0); + st_qword(fs->dirbuf + XDIR_ValidFileSize, 0); + fs->dirbuf[XDIR_GenFlags] = 1; + res = store_xdir(&dj); + if (res == FR_OK && fp->obj.sclust) { /* Remove the cluster chain if exist */ + res = remove_chain(&fp->obj, fp->obj.sclust, 0); + fs->last_clst = fp->obj.sclust - 1; /* Reuse the cluster hole */ + } + } else +#endif + { + /* Clean directory info */ + st_dword(dj.dir + DIR_CrtTime, dw); /* Set created time */ + st_dword(dj.dir + DIR_ModTime, dw); /* Set modified time */ + dj.dir[DIR_Attr] = AM_ARC; /* Reset attribute */ + cl = ld_clust(fs, dj.dir); /* Get cluster chain */ + st_clust(fs, dj.dir, 0); /* Reset file allocation info */ + st_dword(dj.dir + DIR_FileSize, 0); + fs->wflag = 1; + + if (cl) { /* Remove the cluster chain if exist */ + dw = fs->winsect; + res = remove_chain(&dj.obj, cl, 0); + if (res == FR_OK) { + res = move_window(fs, dw); + fs->last_clst = cl - 1; /* Reuse the cluster hole */ + } + } + } + } + } + else { /* Open an existing file */ + if (res == FR_OK) { /* Following succeeded */ + if (dj.obj.attr & AM_DIR) { /* It is a directory */ + res = FR_NO_FILE; + } else { + if ((mode & FA_WRITE) && (dj.obj.attr & AM_RDO)) { /* R/O violation */ + res = FR_DENIED; + } + } + } + } + if (res == FR_OK) { + if (mode & FA_CREATE_ALWAYS) /* Set file change flag if created or overwritten */ + mode |= FA_MODIFIED; + fp->dir_sect = fs->winsect; /* Pointer to the directory entry */ + fp->dir_ptr = dj.dir; +#if _FS_LOCK != 0 + fp->obj.lockid = inc_lock(&dj, (mode & ~FA_READ) ? 1 : 0); + if (!fp->obj.lockid) res = FR_INT_ERR; +#endif + } +#else /* R/O configuration */ + if (res == FR_OK) { + if (dj.fn[NSFLAG] & NS_NONAME) { /* Origin directory itself? */ + res = FR_INVALID_NAME; + } else { + if (dj.obj.attr & AM_DIR) { /* It is a directory */ + res = FR_NO_FILE; + } + } + } +#endif + + if (res == FR_OK) { +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + fp->obj.c_scl = dj.obj.sclust; /* Get containing directory info */ + fp->obj.c_size = ((DWORD)dj.obj.objsize & 0xFFFFFF00) | dj.obj.stat; + fp->obj.c_ofs = dj.blk_ofs; + fp->obj.sclust = ld_dword(fs->dirbuf + XDIR_FstClus); /* Get object allocation info */ + fp->obj.objsize = ld_qword(fs->dirbuf + XDIR_FileSize); + fp->obj.stat = fs->dirbuf[XDIR_GenFlags] & 2; + } else +#endif + { + fp->obj.sclust = ld_clust(fs, dj.dir); /* Get object allocation info */ + fp->obj.objsize = ld_dword(dj.dir + DIR_FileSize); + } +#if _USE_FASTSEEK + fp->cltbl = 0; /* Disable fast seek mode */ +#endif + fp->obj.fs = fs; /* Validate the file object */ + fp->obj.id = fs->id; + fp->flag = mode; /* Set file access mode */ + fp->err = 0; /* Clear error flag */ + fp->sect = 0; /* Invalidate current data sector */ + fp->fptr = 0; /* Set file pointer top of the file */ +#if !_FS_READONLY +#if !_FS_TINY + mem_set(fp->buf, 0, _MAX_SS); /* Clear sector buffer */ +#endif + if ((mode & FA_SEEKEND) && fp->obj.objsize > 0) { /* Seek to end of file if FA_OPEN_APPEND is specified */ + fp->fptr = fp->obj.objsize; /* Offset to seek */ + bcs = (DWORD)fs->csize * SS(fs); /* Cluster size in byte */ + clst = fp->obj.sclust; /* Follow the cluster chain */ + for (ofs = fp->obj.objsize; res == FR_OK && ofs > bcs; ofs -= bcs) { + clst = get_fat(&fp->obj, clst); + if (clst <= 1) res = FR_INT_ERR; + if (clst == 0xFFFFFFFF) res = FR_DISK_ERR; + } + fp->clust = clst; + if (res == FR_OK && ofs % SS(fs)) { /* Fill sector buffer if not on the sector boundary */ + if ((sc = clust2sect(fs, clst)) == 0) { + res = FR_INT_ERR; + } else { + fp->sect = sc + (DWORD)(ofs / SS(fs)); +#if !_FS_TINY + if (disk_read(fs->drv, fp->buf, fp->sect, 1) != RES_OK) res = FR_DISK_ERR; +#endif + } + } + } +#endif + } + + FREE_NAMBUF(); + } + + if (res != FR_OK) fp->obj.fs = 0; /* Invalidate file object on error */ + + LEAVE_FF(fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Read File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_read ( + FIL* fp, /* Pointer to the file object */ + void* buff, /* Pointer to data buffer */ + UINT btr, /* Number of bytes to read */ + UINT* br /* Pointer to number of bytes read */ +) +{ + FRESULT res; + FATFS *fs; + DWORD clst, sect; + FSIZE_t remain; + UINT rcnt, cc, csect; + BYTE *rbuff = (BYTE*)buff; + + + *br = 0; /* Clear read byte counter */ + res = validate(&fp->obj, &fs); /* Check validity of the file object */ + if (res != FR_OK || (res = (FRESULT)fp->err) != FR_OK) LEAVE_FF(fs, res); /* Check validity */ + if (!(fp->flag & FA_READ)) LEAVE_FF(fs, FR_DENIED); /* Check access mode */ + remain = fp->obj.objsize - fp->fptr; + if (btr > remain) btr = (UINT)remain; /* Truncate btr by remaining bytes */ + + for ( ; btr; /* Repeat until all data read */ + rbuff += rcnt, fp->fptr += rcnt, *br += rcnt, btr -= rcnt) { + if (fp->fptr % SS(fs) == 0) { /* On the sector boundary? */ + csect = (UINT)(fp->fptr / SS(fs) & (fs->csize - 1)); /* Sector offset in the cluster */ + if (csect == 0) { /* On the cluster boundary? */ + if (fp->fptr == 0) { /* On the top of the file? */ + clst = fp->obj.sclust; /* Follow cluster chain from the origin */ + } else { /* Middle or end of the file */ +#if _USE_FASTSEEK + if (fp->cltbl) { + clst = clmt_clust(fp, fp->fptr); /* Get cluster# from the CLMT */ + } else +#endif + { + clst = get_fat(&fp->obj, fp->clust); /* Follow cluster chain on the FAT */ + } + } + if (clst < 2) ABORT(fs, FR_INT_ERR); + if (clst == 0xFFFFFFFF) ABORT(fs, FR_DISK_ERR); + fp->clust = clst; /* Update current cluster */ + } + sect = clust2sect(fs, fp->clust); /* Get current sector */ + if (!sect) ABORT(fs, FR_INT_ERR); + sect += csect; + cc = btr / SS(fs); /* When remaining bytes >= sector size, */ + if (cc) { /* Read maximum contiguous sectors directly */ + if (csect + cc > fs->csize) { /* Clip at cluster boundary */ + cc = fs->csize - csect; + } + if (disk_read(fs->drv, rbuff, sect, cc) != RES_OK) ABORT(fs, FR_DISK_ERR); +#if !_FS_READONLY && _FS_MINIMIZE <= 2 /* Replace one of the read sectors with cached data if it contains a dirty sector */ +#if _FS_TINY + if (fs->wflag && fs->winsect - sect < cc) { + mem_cpy(rbuff + ((fs->winsect - sect) * SS(fs)), fs->win, SS(fs)); + } +#else + if ((fp->flag & FA_DIRTY) && fp->sect - sect < cc) { + mem_cpy(rbuff + ((fp->sect - sect) * SS(fs)), fp->buf, SS(fs)); + } +#endif +#endif + rcnt = SS(fs) * cc; /* Number of bytes transferred */ + continue; + } +#if !_FS_TINY + if (fp->sect != sect) { /* Load data sector if not in cache */ +#if !_FS_READONLY + if (fp->flag & FA_DIRTY) { /* Write-back dirty sector cache */ + if (disk_write(fs->drv, fp->buf, fp->sect, 1) != RES_OK) ABORT(fs, FR_DISK_ERR); + fp->flag &= (BYTE)~FA_DIRTY; + } +#endif + if (disk_read(fs->drv, fp->buf, sect, 1) != RES_OK) ABORT(fs, FR_DISK_ERR); /* Fill sector cache */ + } +#endif + fp->sect = sect; + } + rcnt = SS(fs) - (UINT)fp->fptr % SS(fs); /* Number of bytes left in the sector */ + if (rcnt > btr) rcnt = btr; /* Clip it by btr if needed */ +#if _FS_TINY + if (move_window(fs, fp->sect) != FR_OK) ABORT(fs, FR_DISK_ERR); /* Move sector window */ + mem_cpy(rbuff, fs->win + fp->fptr % SS(fs), rcnt); /* Extract partial sector */ +#else + mem_cpy(rbuff, fp->buf + fp->fptr % SS(fs), rcnt); /* Extract partial sector */ +#endif + } + + LEAVE_FF(fs, FR_OK); +} + + + + +#if !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* Write File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_write ( + FIL* fp, /* Pointer to the file object */ + const void* buff, /* Pointer to the data to be written */ + UINT btw, /* Number of bytes to write */ + UINT* bw /* Pointer to number of bytes written */ +) +{ + FRESULT res; + FATFS *fs; + DWORD clst, sect; + UINT wcnt, cc, csect; + const BYTE *wbuff = (const BYTE*)buff; + + + *bw = 0; /* Clear write byte counter */ + res = validate(&fp->obj, &fs); /* Check validity of the file object */ + if (res != FR_OK || (res = (FRESULT)fp->err) != FR_OK) LEAVE_FF(fs, res); /* Check validity */ + if (!(fp->flag & FA_WRITE)) LEAVE_FF(fs, FR_DENIED); /* Check access mode */ + + /* Check fptr wrap-around (file size cannot reach 4GiB on FATxx) */ + if ((!_FS_EXFAT || fs->fs_type != FS_EXFAT) && (DWORD)(fp->fptr + btw) < (DWORD)fp->fptr) { + btw = (UINT)(0xFFFFFFFF - (DWORD)fp->fptr); + } + + for ( ; btw; /* Repeat until all data written */ + wbuff += wcnt, fp->fptr += wcnt, fp->obj.objsize = (fp->fptr > fp->obj.objsize) ? fp->fptr : fp->obj.objsize, *bw += wcnt, btw -= wcnt) { + if (fp->fptr % SS(fs) == 0) { /* On the sector boundary? */ + csect = (UINT)(fp->fptr / SS(fs)) & (fs->csize - 1); /* Sector offset in the cluster */ + if (csect == 0) { /* On the cluster boundary? */ + if (fp->fptr == 0) { /* On the top of the file? */ + clst = fp->obj.sclust; /* Follow from the origin */ + if (clst == 0) { /* If no cluster is allocated, */ + clst = create_chain(&fp->obj, 0); /* create a new cluster chain */ + } + } else { /* On the middle or end of the file */ +#if _USE_FASTSEEK + if (fp->cltbl) { + clst = clmt_clust(fp, fp->fptr); /* Get cluster# from the CLMT */ + } else +#endif + { + clst = create_chain(&fp->obj, fp->clust); /* Follow or stretch cluster chain on the FAT */ + } + } + if (clst == 0) break; /* Could not allocate a new cluster (disk full) */ + if (clst == 1) ABORT(fs, FR_INT_ERR); + if (clst == 0xFFFFFFFF) ABORT(fs, FR_DISK_ERR); + fp->clust = clst; /* Update current cluster */ + if (fp->obj.sclust == 0) fp->obj.sclust = clst; /* Set start cluster if the first write */ + } +#if _FS_TINY + if (fs->winsect == fp->sect && sync_window(fs) != FR_OK) ABORT(fs, FR_DISK_ERR); /* Write-back sector cache */ +#else + if (fp->flag & FA_DIRTY) { /* Write-back sector cache */ + if (disk_write(fs->drv, fp->buf, fp->sect, 1) != RES_OK) ABORT(fs, FR_DISK_ERR); + fp->flag &= (BYTE)~FA_DIRTY; + } +#endif + sect = clust2sect(fs, fp->clust); /* Get current sector */ + if (!sect) ABORT(fs, FR_INT_ERR); + sect += csect; + cc = btw / SS(fs); /* When remaining bytes >= sector size, */ + if (cc) { /* Write maximum contiguous sectors directly */ + if (csect + cc > fs->csize) { /* Clip at cluster boundary */ + cc = fs->csize - csect; + } + if (disk_write(fs->drv, wbuff, sect, cc) != RES_OK) ABORT(fs, FR_DISK_ERR); +#if _FS_MINIMIZE <= 2 +#if _FS_TINY + if (fs->winsect - sect < cc) { /* Refill sector cache if it gets invalidated by the direct write */ + mem_cpy(fs->win, wbuff + ((fs->winsect - sect) * SS(fs)), SS(fs)); + fs->wflag = 0; + } +#else + if (fp->sect - sect < cc) { /* Refill sector cache if it gets invalidated by the direct write */ + mem_cpy(fp->buf, wbuff + ((fp->sect - sect) * SS(fs)), SS(fs)); + fp->flag &= (BYTE)~FA_DIRTY; + } +#endif +#endif + wcnt = SS(fs) * cc; /* Number of bytes transferred */ + continue; + } +#if _FS_TINY + if (fp->fptr >= fp->obj.objsize) { /* Avoid silly cache filling on the growing edge */ + if (sync_window(fs) != FR_OK) ABORT(fs, FR_DISK_ERR); + fs->winsect = sect; + } +#else + if (fp->sect != sect && /* Fill sector cache with file data */ + fp->fptr < fp->obj.objsize && + disk_read(fs->drv, fp->buf, sect, 1) != RES_OK) { + ABORT(fs, FR_DISK_ERR); + } +#endif + fp->sect = sect; + } + wcnt = SS(fs) - (UINT)fp->fptr % SS(fs); /* Number of bytes left in the sector */ + if (wcnt > btw) wcnt = btw; /* Clip it by btw if needed */ +#if _FS_TINY + if (move_window(fs, fp->sect) != FR_OK) ABORT(fs, FR_DISK_ERR); /* Move sector window */ + mem_cpy(fs->win + fp->fptr % SS(fs), wbuff, wcnt); /* Fit data to the sector */ + fs->wflag = 1; +#else + mem_cpy(fp->buf + fp->fptr % SS(fs), wbuff, wcnt); /* Fit data to the sector */ + fp->flag |= FA_DIRTY; +#endif + } + + fp->flag |= FA_MODIFIED; /* Set file change flag */ + + LEAVE_FF(fs, FR_OK); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Synchronize the File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_sync ( + FIL* fp /* Pointer to the file object */ +) +{ + FRESULT res; + FATFS *fs; + DWORD tm; + BYTE *dir; +#if _FS_EXFAT + DIR dj; + DEF_NAMBUF +#endif + + res = validate(&fp->obj, &fs); /* Check validity of the file object */ + if (res == FR_OK) { + if (fp->flag & FA_MODIFIED) { /* Is there any change to the file? */ +#if !_FS_TINY + if (fp->flag & FA_DIRTY) { /* Write-back cached data if needed */ + if (disk_write(fs->drv, fp->buf, fp->sect, 1) != RES_OK) LEAVE_FF(fs, FR_DISK_ERR); + fp->flag &= (BYTE)~FA_DIRTY; + } +#endif + /* Update the directory entry */ + tm = GET_FATTIME(); /* Modified time */ +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + res = fill_first_frag(&fp->obj); /* Fill first fragment on the FAT if needed */ + if (res == FR_OK) { + res = fill_last_frag(&fp->obj, fp->clust, 0xFFFFFFFF); /* Fill last fragment on the FAT if needed */ + } + if (res == FR_OK) { + INIT_NAMBUF(fs); + res = load_obj_dir(&dj, &fp->obj); /* Load directory entry block */ + if (res == FR_OK) { + fs->dirbuf[XDIR_Attr] |= AM_ARC; /* Set archive bit */ + fs->dirbuf[XDIR_GenFlags] = fp->obj.stat | 1; /* Update file allocation info */ + st_dword(fs->dirbuf + XDIR_FstClus, fp->obj.sclust); + st_qword(fs->dirbuf + XDIR_FileSize, fp->obj.objsize); + st_qword(fs->dirbuf + XDIR_ValidFileSize, fp->obj.objsize); + st_dword(fs->dirbuf + XDIR_ModTime, tm); /* Update modified time */ + fs->dirbuf[XDIR_ModTime10] = 0; + st_dword(fs->dirbuf + XDIR_AccTime, 0); + res = store_xdir(&dj); /* Restore it to the directory */ + if (res == FR_OK) { + res = sync_fs(fs); + fp->flag &= (BYTE)~FA_MODIFIED; + } + } + FREE_NAMBUF(); + } + } else +#endif + { + res = move_window(fs, fp->dir_sect); + if (res == FR_OK) { + dir = fp->dir_ptr; + dir[DIR_Attr] |= AM_ARC; /* Set archive bit */ + st_clust(fp->obj.fs, dir, fp->obj.sclust); /* Update file allocation info */ + st_dword(dir + DIR_FileSize, (DWORD)fp->obj.objsize); /* Update file size */ + st_dword(dir + DIR_ModTime, tm); /* Update modified time */ + st_word(dir + DIR_LstAccDate, 0); + fs->wflag = 1; + res = sync_fs(fs); /* Restore it to the directory */ + fp->flag &= (BYTE)~FA_MODIFIED; + } + } + } + } + + LEAVE_FF(fs, res); +} + +#endif /* !_FS_READONLY */ + + + + +/*-----------------------------------------------------------------------*/ +/* Close File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_close ( + FIL* fp /* Pointer to the file object to be closed */ +) +{ + FRESULT res; + FATFS *fs; + +#if !_FS_READONLY + res = f_sync(fp); /* Flush cached data */ + if (res == FR_OK) +#endif + { + res = validate(&fp->obj, &fs); /* Lock volume */ + if (res == FR_OK) { +#if _FS_LOCK != 0 + res = dec_lock(fp->obj.lockid); /* Decrement file open counter */ + if (res == FR_OK) +#endif + { + fp->obj.fs = 0; /* Invalidate file object */ + } +#if _FS_REENTRANT + unlock_fs(fs, FR_OK); /* Unlock volume */ +#endif + } + } + return res; +} + + + + +#if _FS_RPATH >= 1 +/*-----------------------------------------------------------------------*/ +/* Change Current Directory or Current Drive, Get Current Directory */ +/*-----------------------------------------------------------------------*/ + +#if _VOLUMES >= 2 +FRESULT f_chdrive ( + const TCHAR* path /* Drive number */ +) +{ + int vol; + + + /* Get logical drive number */ + vol = get_ldnumber(&path); + if (vol < 0) return FR_INVALID_DRIVE; + + CurrVol = (BYTE)vol; /* Set it as current volume */ + + return FR_OK; +} +#endif + + +FRESULT f_chdir ( + const TCHAR* path /* Pointer to the directory path */ +) +{ + FRESULT res; + DIR dj; + FATFS *fs; + DEF_NAMBUF + + /* Get logical drive */ + res = find_volume(&path, &fs, 0); + if (res == FR_OK) { + dj.obj.fs = fs; + INIT_NAMBUF(fs); + res = follow_path(&dj, path); /* Follow the path */ + if (res == FR_OK) { /* Follow completed */ + if (dj.fn[NSFLAG] & NS_NONAME) { + fs->cdir = dj.obj.sclust; /* It is the start directory itself */ +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + fs->cdc_scl = dj.obj.c_scl; + fs->cdc_size = dj.obj.c_size; + fs->cdc_ofs = dj.obj.c_ofs; + } +#endif + } else { + if (dj.obj.attr & AM_DIR) { /* It is a sub-directory */ +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + fs->cdir = ld_dword(fs->dirbuf + XDIR_FstClus); /* Sub-directory cluster */ + fs->cdc_scl = dj.obj.sclust; /* Save containing directory information */ + fs->cdc_size = ((DWORD)dj.obj.objsize & 0xFFFFFF00) | dj.obj.stat; + fs->cdc_ofs = dj.blk_ofs; + } else +#endif + { + fs->cdir = ld_clust(fs, dj.dir); /* Sub-directory cluster */ + } + } else { + res = FR_NO_PATH; /* Reached but a file */ + } + } + } + FREE_NAMBUF(); + if (res == FR_NO_FILE) res = FR_NO_PATH; + } + + LEAVE_FF(fs, res); +} + + +#if _FS_RPATH >= 2 +FRESULT f_getcwd ( + TCHAR* buff, /* Pointer to the directory path */ + UINT len /* Size of path */ +) +{ + FRESULT res; + DIR dj; + FATFS *fs; + UINT i, n; + DWORD ccl; + TCHAR *tp; + FILINFO fno; + DEF_NAMBUF + + + *buff = 0; + /* Get logical drive */ + res = find_volume((const TCHAR**)&buff, &fs, 0); /* Get current volume */ + if (res == FR_OK) { + dj.obj.fs = fs; + INIT_NAMBUF(fs); + i = len; /* Bottom of buffer (directory stack base) */ + if (!_FS_EXFAT || fs->fs_type != FS_EXFAT) { /* (Cannot do getcwd on exFAT and returns root path) */ + dj.obj.sclust = fs->cdir; /* Start to follow upper directory from current directory */ + while ((ccl = dj.obj.sclust) != 0) { /* Repeat while current directory is a sub-directory */ + res = dir_sdi(&dj, 1 * SZDIRE); /* Get parent directory */ + if (res != FR_OK) break; + res = move_window(fs, dj.sect); + if (res != FR_OK) break; + dj.obj.sclust = ld_clust(fs, dj.dir); /* Goto parent directory */ + res = dir_sdi(&dj, 0); + if (res != FR_OK) break; + do { /* Find the entry links to the child directory */ + res = dir_read(&dj, 0); + if (res != FR_OK) break; + if (ccl == ld_clust(fs, dj.dir)) break; /* Found the entry */ + res = dir_next(&dj, 0); + } while (res == FR_OK); + if (res == FR_NO_FILE) res = FR_INT_ERR;/* It cannot be 'not found'. */ + if (res != FR_OK) break; + get_fileinfo(&dj, &fno); /* Get the directory name and push it to the buffer */ + for (n = 0; fno.fname[n]; n++) ; + if (i < n + 3) { + res = FR_NOT_ENOUGH_CORE; break; + } + while (n) buff[--i] = fno.fname[--n]; + buff[--i] = '/'; + } + } + tp = buff; + if (res == FR_OK) { +#if _VOLUMES >= 2 + *tp++ = '0' + CurrVol; /* Put drive number */ + *tp++ = ':'; +#endif + if (i == len) { /* Root-directory */ + *tp++ = '/'; + } else { /* Sub-directroy */ + do /* Add stacked path str */ + *tp++ = buff[i++]; + while (i < len); + } + } + *tp = 0; + FREE_NAMBUF(); + } + + LEAVE_FF(fs, res); +} + +#endif /* _FS_RPATH >= 2 */ +#endif /* _FS_RPATH >= 1 */ + + + +#if _FS_MINIMIZE <= 2 +/*-----------------------------------------------------------------------*/ +/* Seek File R/W Pointer */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_lseek ( + FIL* fp, /* Pointer to the file object */ + FSIZE_t ofs /* File pointer from top of file */ +) +{ + FRESULT res; + FATFS *fs; + DWORD clst, bcs, nsect; + FSIZE_t ifptr; +#if _USE_FASTSEEK + DWORD cl, pcl, ncl, tcl, dsc, tlen, ulen, *tbl; +#endif + + res = validate(&fp->obj, &fs); /* Check validity of the file object */ + if (res == FR_OK) res = (FRESULT)fp->err; +#if _FS_EXFAT && !_FS_READONLY + if (res == FR_OK && fs->fs_type == FS_EXFAT) { + res = fill_last_frag(&fp->obj, fp->clust, 0xFFFFFFFF); /* Fill last fragment on the FAT if needed */ + } +#endif + if (res != FR_OK) LEAVE_FF(fs, res); + +#if _USE_FASTSEEK + if (fp->cltbl) { /* Fast seek */ + if (ofs == CREATE_LINKMAP) { /* Create CLMT */ + tbl = fp->cltbl; + tlen = *tbl++; ulen = 2; /* Given table size and required table size */ + cl = fp->obj.sclust; /* Origin of the chain */ + if (cl) { + do { + /* Get a fragment */ + tcl = cl; ncl = 0; ulen += 2; /* Top, length and used items */ + do { + pcl = cl; ncl++; + cl = get_fat(&fp->obj, cl); + if (cl <= 1) ABORT(fs, FR_INT_ERR); + if (cl == 0xFFFFFFFF) ABORT(fs, FR_DISK_ERR); + } while (cl == pcl + 1); + if (ulen <= tlen) { /* Store the length and top of the fragment */ + *tbl++ = ncl; *tbl++ = tcl; + } + } while (cl < fs->n_fatent); /* Repeat until end of chain */ + } + *fp->cltbl = ulen; /* Number of items used */ + if (ulen <= tlen) { + *tbl = 0; /* Terminate table */ + } else { + res = FR_NOT_ENOUGH_CORE; /* Given table size is smaller than required */ + } + } else { /* Fast seek */ + if (ofs > fp->obj.objsize) ofs = fp->obj.objsize; /* Clip offset at the file size */ + fp->fptr = ofs; /* Set file pointer */ + if (ofs) { + fp->clust = clmt_clust(fp, ofs - 1); + dsc = clust2sect(fs, fp->clust); + if (!dsc) ABORT(fs, FR_INT_ERR); + dsc += (DWORD)((ofs - 1) / SS(fs)) & (fs->csize - 1); + if (fp->fptr % SS(fs) && dsc != fp->sect) { /* Refill sector cache if needed */ +#if !_FS_TINY +#if !_FS_READONLY + if (fp->flag & FA_DIRTY) { /* Write-back dirty sector cache */ + if (disk_write(fs->drv, fp->buf, fp->sect, 1) != RES_OK) ABORT(fs, FR_DISK_ERR); + fp->flag &= (BYTE)~FA_DIRTY; + } +#endif + if (disk_read(fs->drv, fp->buf, dsc, 1) != RES_OK) ABORT(fs, FR_DISK_ERR); /* Load current sector */ +#endif + fp->sect = dsc; + } + } + } + } else +#endif + + /* Normal Seek */ + { +#if _FS_EXFAT + if (fs->fs_type != FS_EXFAT && ofs >= 0x100000000) ofs = 0xFFFFFFFF; /* Clip at 4GiB-1 if at FATxx */ +#endif + if (ofs > fp->obj.objsize && (_FS_READONLY || !(fp->flag & FA_WRITE))) { /* In read-only mode, clip offset with the file size */ + ofs = fp->obj.objsize; + } + ifptr = fp->fptr; + fp->fptr = nsect = 0; + if (ofs) { + bcs = (DWORD)fs->csize * SS(fs); /* Cluster size (byte) */ + if (ifptr > 0 && + (ofs - 1) / bcs >= (ifptr - 1) / bcs) { /* When seek to same or following cluster, */ + fp->fptr = (ifptr - 1) & ~(FSIZE_t)(bcs - 1); /* start from the current cluster */ + ofs -= fp->fptr; + clst = fp->clust; + } else { /* When seek to back cluster, */ + clst = fp->obj.sclust; /* start from the first cluster */ +#if !_FS_READONLY + if (clst == 0) { /* If no cluster chain, create a new chain */ + clst = create_chain(&fp->obj, 0); + if (clst == 1) ABORT(fs, FR_INT_ERR); + if (clst == 0xFFFFFFFF) ABORT(fs, FR_DISK_ERR); + fp->obj.sclust = clst; + } +#endif + fp->clust = clst; + } + if (clst != 0) { + while (ofs > bcs) { /* Cluster following loop */ + ofs -= bcs; fp->fptr += bcs; +#if !_FS_READONLY + if (fp->flag & FA_WRITE) { /* Check if in write mode or not */ + if (_FS_EXFAT && fp->fptr > fp->obj.objsize) { /* No FAT chain object needs correct objsize to generate FAT value */ + fp->obj.objsize = fp->fptr; + fp->flag |= FA_MODIFIED; + } + clst = create_chain(&fp->obj, clst); /* Follow chain with forceed stretch */ + if (clst == 0) { /* Clip file size in case of disk full */ + ofs = 0; break; + } + } else +#endif + { + clst = get_fat(&fp->obj, clst); /* Follow cluster chain if not in write mode */ + } + if (clst == 0xFFFFFFFF) ABORT(fs, FR_DISK_ERR); + if (clst <= 1 || clst >= fs->n_fatent) ABORT(fs, FR_INT_ERR); + fp->clust = clst; + } + fp->fptr += ofs; + if (ofs % SS(fs)) { + nsect = clust2sect(fs, clst); /* Current sector */ + if (!nsect) ABORT(fs, FR_INT_ERR); + nsect += (DWORD)(ofs / SS(fs)); + } + } + } + if (!_FS_READONLY && fp->fptr > fp->obj.objsize) { /* Set file change flag if the file size is extended */ + fp->obj.objsize = fp->fptr; + fp->flag |= FA_MODIFIED; + } + if (fp->fptr % SS(fs) && nsect != fp->sect) { /* Fill sector cache if needed */ +#if !_FS_TINY +#if !_FS_READONLY + if (fp->flag & FA_DIRTY) { /* Write-back dirty sector cache */ + if (disk_write(fs->drv, fp->buf, fp->sect, 1) != RES_OK) ABORT(fs, FR_DISK_ERR); + fp->flag &= (BYTE)~FA_DIRTY; + } +#endif + if (disk_read(fs->drv, fp->buf, nsect, 1) != RES_OK) ABORT(fs, FR_DISK_ERR); /* Fill sector cache */ +#endif + fp->sect = nsect; + } + } + + LEAVE_FF(fs, res); +} + + + +#if _FS_MINIMIZE <= 1 +/*-----------------------------------------------------------------------*/ +/* Create a Directory Object */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_opendir ( + DIR* dp, /* Pointer to directory object to create */ + const TCHAR* path /* Pointer to the directory path */ +) +{ + FRESULT res; + FATFS *fs; + _FDID *obj; + DEF_NAMBUF + + + if (!dp) return FR_INVALID_OBJECT; + + /* Get logical drive */ + obj = &dp->obj; + res = find_volume(&path, &fs, 0); + if (res == FR_OK) { + obj->fs = fs; + INIT_NAMBUF(fs); + res = follow_path(dp, path); /* Follow the path to the directory */ + if (res == FR_OK) { /* Follow completed */ + if (!(dp->fn[NSFLAG] & NS_NONAME)) { /* It is not the origin directory itself */ + if (obj->attr & AM_DIR) { /* This object is a sub-directory */ +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + obj->c_scl = obj->sclust; /* Get containing directory inforamation */ + obj->c_size = ((DWORD)obj->objsize & 0xFFFFFF00) | obj->stat; + obj->c_ofs = dp->blk_ofs; + obj->sclust = ld_dword(fs->dirbuf + XDIR_FstClus); /* Get object allocation info */ + obj->objsize = ld_qword(fs->dirbuf + XDIR_FileSize); + obj->stat = fs->dirbuf[XDIR_GenFlags] & 2; + } else +#endif + { + obj->sclust = ld_clust(fs, dp->dir); /* Get object allocation info */ + } + } else { /* This object is a file */ + res = FR_NO_PATH; + } + } + if (res == FR_OK) { + obj->id = fs->id; + res = dir_sdi(dp, 0); /* Rewind directory */ +#if _FS_LOCK != 0 + if (res == FR_OK) { + if (obj->sclust) { + obj->lockid = inc_lock(dp, 0); /* Lock the sub directory */ + if (!obj->lockid) res = FR_TOO_MANY_OPEN_FILES; + } else { + obj->lockid = 0; /* Root directory need not to be locked */ + } + } +#endif + } + } + FREE_NAMBUF(); + if (res == FR_NO_FILE) res = FR_NO_PATH; + } + if (res != FR_OK) obj->fs = 0; /* Invalidate the directory object if function faild */ + + LEAVE_FF(fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Close Directory */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_closedir ( + DIR *dp /* Pointer to the directory object to be closed */ +) +{ + FRESULT res; + FATFS *fs; + + + res = validate(&dp->obj, &fs); /* Check validity of the file object */ + if (res == FR_OK) { +#if _FS_LOCK != 0 + if (dp->obj.lockid) { /* Decrement sub-directory open counter */ + res = dec_lock(dp->obj.lockid); + } + if (res == FR_OK) +#endif + { + dp->obj.fs = 0; /* Invalidate directory object */ + } +#if _FS_REENTRANT + unlock_fs(fs, FR_OK); /* Unlock volume */ +#endif + } + return res; +} + + + + +/*-----------------------------------------------------------------------*/ +/* Read Directory Entries in Sequence */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_readdir ( + DIR* dp, /* Pointer to the open directory object */ + FILINFO* fno /* Pointer to file information to return */ +) +{ + FRESULT res; + FATFS *fs; + DEF_NAMBUF + + + res = validate(&dp->obj, &fs); /* Check validity of the directory object */ + if (res == FR_OK) { + if (!fno) { + res = dir_sdi(dp, 0); /* Rewind the directory object */ + } else { + INIT_NAMBUF(fs); + res = dir_read(dp, 0); /* Read an item */ + if (res == FR_NO_FILE) res = FR_OK; /* Ignore end of directory */ + if (res == FR_OK) { /* A valid entry is found */ + get_fileinfo(dp, fno); /* Get the object information */ + res = dir_next(dp, 0); /* Increment index for next */ + if (res == FR_NO_FILE) res = FR_OK; /* Ignore end of directory now */ + } + FREE_NAMBUF(); + } + } + LEAVE_FF(fs, res); +} + + + +#if _USE_FIND +/*-----------------------------------------------------------------------*/ +/* Find Next File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_findnext ( + DIR* dp, /* Pointer to the open directory object */ + FILINFO* fno /* Pointer to the file information structure */ +) +{ + FRESULT res; + + + for (;;) { + res = f_readdir(dp, fno); /* Get a directory item */ + if (res != FR_OK || !fno || !fno->fname[0]) break; /* Terminate if any error or end of directory */ + if (pattern_matching(dp->pat, fno->fname, 0, 0)) break; /* Test for the file name */ +#if _USE_LFN != 0 && _USE_FIND == 2 + if (pattern_matching(dp->pat, fno->altname, 0, 0)) break; /* Test for alternative name if exist */ +#endif + } + return res; +} + + + +/*-----------------------------------------------------------------------*/ +/* Find First File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_findfirst ( + DIR* dp, /* Pointer to the blank directory object */ + FILINFO* fno, /* Pointer to the file information structure */ + const TCHAR* path, /* Pointer to the directory to open */ + const TCHAR* pattern /* Pointer to the matching pattern */ +) +{ + FRESULT res; + + + dp->pat = pattern; /* Save pointer to pattern string */ + res = f_opendir(dp, path); /* Open the target directory */ + if (res == FR_OK) { + res = f_findnext(dp, fno); /* Find the first item */ + } + return res; +} + +#endif /* _USE_FIND */ + + + +#if _FS_MINIMIZE == 0 +/*-----------------------------------------------------------------------*/ +/* Get File Status */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_stat ( + const TCHAR* path, /* Pointer to the file path */ + FILINFO* fno /* Pointer to file information to return */ +) +{ + FRESULT res; + DIR dj; + DEF_NAMBUF + + + /* Get logical drive */ + res = find_volume(&path, &dj.obj.fs, 0); + if (res == FR_OK) { + INIT_NAMBUF(dj.obj.fs); + res = follow_path(&dj, path); /* Follow the file path */ + if (res == FR_OK) { /* Follow completed */ + if (dj.fn[NSFLAG] & NS_NONAME) { /* It is origin directory */ + res = FR_INVALID_NAME; + } else { /* Found an object */ + if (fno) get_fileinfo(&dj, fno); + } + } + FREE_NAMBUF(); + } + + LEAVE_FF(dj.obj.fs, res); +} + + + +#if !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* Get Number of Free Clusters */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_getfree ( + const TCHAR* path, /* Path name of the logical drive number */ + DWORD* nclst, /* Pointer to a variable to return number of free clusters */ + FATFS** fatfs /* Pointer to return pointer to corresponding file system object */ +) +{ + FRESULT res; + FATFS *fs; + DWORD nfree, clst, sect, stat; + UINT i; + BYTE *p; + _FDID obj; + + + /* Get logical drive */ + res = find_volume(&path, &fs, 0); + if (res == FR_OK) { + *fatfs = fs; /* Return ptr to the fs object */ + /* If free_clst is valid, return it without full cluster scan */ + if (fs->free_clst <= fs->n_fatent - 2) { + *nclst = fs->free_clst; + } else { + /* Get number of free clusters */ + nfree = 0; + if (fs->fs_type == FS_FAT12) { /* FAT12: Sector unalighed FAT entries */ + clst = 2; obj.fs = fs; + do { + stat = get_fat(&obj, clst); + if (stat == 0xFFFFFFFF) { res = FR_DISK_ERR; break; } + if (stat == 1) { res = FR_INT_ERR; break; } + if (stat == 0) nfree++; + } while (++clst < fs->n_fatent); + } else { +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { /* exFAT: Scan bitmap table */ + BYTE bm; + UINT b; + + clst = fs->n_fatent - 2; + sect = fs->database; + i = 0; + do { + if (i == 0 && (res = move_window(fs, sect++)) != FR_OK) break; + for (b = 8, bm = fs->win[i]; b && clst; b--, clst--) { + if (!(bm & 1)) nfree++; + bm >>= 1; + } + i = (i + 1) % SS(fs); + } while (clst); + } else +#endif + { /* FAT16/32: Sector alighed FAT entries */ + clst = fs->n_fatent; sect = fs->fatbase; + i = 0; p = 0; + do { + if (i == 0) { + res = move_window(fs, sect++); + if (res != FR_OK) break; + p = fs->win; + i = SS(fs); + } + if (fs->fs_type == FS_FAT16) { + if (ld_word(p) == 0) nfree++; + p += 2; i -= 2; + } else { + if ((ld_dword(p) & 0x0FFFFFFF) == 0) nfree++; + p += 4; i -= 4; + } + } while (--clst); + } + } + *nclst = nfree; /* Return the free clusters */ + fs->free_clst = nfree; /* Now free_clst is valid */ + fs->fsi_flag |= 1; /* FSInfo is to be updated */ + } + } + + LEAVE_FF(fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Truncate File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_truncate ( + FIL* fp /* Pointer to the file object */ +) +{ + FRESULT res; + FATFS *fs; + DWORD ncl; + + + res = validate(&fp->obj, &fs); /* Check validity of the file object */ + if (res != FR_OK || (res = (FRESULT)fp->err) != FR_OK) LEAVE_FF(fs, res); + if (!(fp->flag & FA_WRITE)) LEAVE_FF(fs, FR_DENIED); /* Check access mode */ + + if (fp->fptr < fp->obj.objsize) { /* Process when fptr is not on the eof */ + if (fp->fptr == 0) { /* When set file size to zero, remove entire cluster chain */ + res = remove_chain(&fp->obj, fp->obj.sclust, 0); + fp->obj.sclust = 0; + } else { /* When truncate a part of the file, remove remaining clusters */ + ncl = get_fat(&fp->obj, fp->clust); + res = FR_OK; + if (ncl == 0xFFFFFFFF) res = FR_DISK_ERR; + if (ncl == 1) res = FR_INT_ERR; + if (res == FR_OK && ncl < fs->n_fatent) { + res = remove_chain(&fp->obj, ncl, fp->clust); + } + } + fp->obj.objsize = fp->fptr; /* Set file size to current R/W point */ + fp->flag |= FA_MODIFIED; +#if !_FS_TINY + if (res == FR_OK && (fp->flag & FA_DIRTY)) { + if (disk_write(fs->drv, fp->buf, fp->sect, 1) != RES_OK) { + res = FR_DISK_ERR; + } else { + fp->flag &= (BYTE)~FA_DIRTY; + } + } +#endif + if (res != FR_OK) ABORT(fs, res); + } + + LEAVE_FF(fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Delete a File/Directory */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_unlink ( + const TCHAR* path /* Pointer to the file or directory path */ +) +{ + FRESULT res; + DIR dj, sdj; + DWORD dclst = 0; + FATFS *fs; +#if _FS_EXFAT + _FDID obj; +#endif + DEF_NAMBUF + + + /* Get logical drive */ + res = find_volume(&path, &fs, FA_WRITE); + dj.obj.fs = fs; + if (res == FR_OK) { + INIT_NAMBUF(fs); + res = follow_path(&dj, path); /* Follow the file path */ + if (_FS_RPATH && res == FR_OK && (dj.fn[NSFLAG] & NS_DOT)) { + res = FR_INVALID_NAME; /* Cannot remove dot entry */ + } +#if _FS_LOCK != 0 + if (res == FR_OK) res = chk_lock(&dj, 2); /* Check if it is an open object */ +#endif + if (res == FR_OK) { /* The object is accessible */ + if (dj.fn[NSFLAG] & NS_NONAME) { + res = FR_INVALID_NAME; /* Cannot remove the origin directory */ + } else { + if (dj.obj.attr & AM_RDO) { + res = FR_DENIED; /* Cannot remove R/O object */ + } + } + if (res == FR_OK) { +#if _FS_EXFAT + obj.fs = fs; + if (fs->fs_type == FS_EXFAT) { + obj.sclust = dclst = ld_dword(fs->dirbuf + XDIR_FstClus); + obj.objsize = ld_qword(fs->dirbuf + XDIR_FileSize); + obj.stat = fs->dirbuf[XDIR_GenFlags] & 2; + } else +#endif + { + dclst = ld_clust(fs, dj.dir); + } + if (dj.obj.attr & AM_DIR) { /* Is it a sub-directory? */ +#if _FS_RPATH != 0 + if (dclst == fs->cdir) { /* Is it the current directory? */ + res = FR_DENIED; + } else +#endif + { + sdj.obj.fs = fs; /* Open the sub-directory */ + sdj.obj.sclust = dclst; +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + sdj.obj.objsize = obj.objsize; + sdj.obj.stat = obj.stat; + } +#endif + res = dir_sdi(&sdj, 0); + if (res == FR_OK) { + res = dir_read(&sdj, 0); /* Read an item */ + if (res == FR_OK) res = FR_DENIED; /* Not empty? */ + if (res == FR_NO_FILE) res = FR_OK; /* Empty? */ + } + } + } + } + if (res == FR_OK) { + res = dir_remove(&dj); /* Remove the directory entry */ + if (res == FR_OK && dclst) { /* Remove the cluster chain if exist */ +#if _FS_EXFAT + res = remove_chain(&obj, dclst, 0); +#else + res = remove_chain(&dj.obj, dclst, 0); +#endif + } + if (res == FR_OK) res = sync_fs(fs); + } + } + FREE_NAMBUF(); + } + + LEAVE_FF(fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Create a Directory */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_mkdir ( + const TCHAR* path /* Pointer to the directory path */ +) +{ + FRESULT res; + DIR dj; + FATFS *fs; + BYTE *dir; + UINT n; + DWORD dsc, dcl, pcl, tm; + DEF_NAMBUF + + + /* Get logical drive */ + res = find_volume(&path, &fs, FA_WRITE); + dj.obj.fs = fs; + if (res == FR_OK) { + INIT_NAMBUF(fs); + res = follow_path(&dj, path); /* Follow the file path */ + if (res == FR_OK) res = FR_EXIST; /* Any object with same name is already existing */ + if (_FS_RPATH && res == FR_NO_FILE && (dj.fn[NSFLAG] & NS_DOT)) { + res = FR_INVALID_NAME; + } + if (res == FR_NO_FILE) { /* Can create a new directory */ + dcl = create_chain(&dj.obj, 0); /* Allocate a cluster for the new directory table */ + dj.obj.objsize = (DWORD)fs->csize * SS(fs); + res = FR_OK; + if (dcl == 0) res = FR_DENIED; /* No space to allocate a new cluster */ + if (dcl == 1) res = FR_INT_ERR; + if (dcl == 0xFFFFFFFF) res = FR_DISK_ERR; + if (res == FR_OK) res = sync_window(fs); /* Flush FAT */ + tm = GET_FATTIME(); + if (res == FR_OK) { /* Initialize the new directory table */ + dsc = clust2sect(fs, dcl); + dir = fs->win; + mem_set(dir, 0, SS(fs)); + if (!_FS_EXFAT || fs->fs_type != FS_EXFAT) { + mem_set(dir + DIR_Name, ' ', 11); /* Create "." entry */ + dir[DIR_Name] = '.'; + dir[DIR_Attr] = AM_DIR; + st_dword(dir + DIR_ModTime, tm); + st_clust(fs, dir, dcl); + mem_cpy(dir + SZDIRE, dir, SZDIRE); /* Create ".." entry */ + dir[SZDIRE + 1] = '.'; pcl = dj.obj.sclust; + if (fs->fs_type == FS_FAT32 && pcl == fs->dirbase) pcl = 0; + st_clust(fs, dir + SZDIRE, pcl); + } + for (n = fs->csize; n; n--) { /* Write dot entries and clear following sectors */ + fs->winsect = dsc++; + fs->wflag = 1; + res = sync_window(fs); + if (res != FR_OK) break; + mem_set(dir, 0, SS(fs)); + } + } + if (res == FR_OK) { + res = dir_register(&dj); /* Register the object to the directoy */ + } + if (res == FR_OK) { +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { /* Initialize directory entry block */ + st_dword(fs->dirbuf + XDIR_ModTime, tm); /* Created time */ + st_dword(fs->dirbuf + XDIR_FstClus, dcl); /* Table start cluster */ + st_dword(fs->dirbuf + XDIR_FileSize, (DWORD)dj.obj.objsize); /* File size needs to be valid */ + st_dword(fs->dirbuf + XDIR_ValidFileSize, (DWORD)dj.obj.objsize); + fs->dirbuf[XDIR_GenFlags] = 3; /* Initialize the object flag (contiguous) */ + fs->dirbuf[XDIR_Attr] = AM_DIR; /* Attribute */ + res = store_xdir(&dj); + } else +#endif + { + dir = dj.dir; + st_dword(dir + DIR_ModTime, tm); /* Created time */ + st_clust(fs, dir, dcl); /* Table start cluster */ + dir[DIR_Attr] = AM_DIR; /* Attribute */ + fs->wflag = 1; + } + if (res == FR_OK) { + res = sync_fs(fs); + } + } else { + remove_chain(&dj.obj, dcl, 0); /* Could not register, remove cluster chain */ + } + } + FREE_NAMBUF(); + } + + LEAVE_FF(fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Rename a File/Directory */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_rename ( + const TCHAR* path_old, /* Pointer to the object name to be renamed */ + const TCHAR* path_new /* Pointer to the new name */ +) +{ + FRESULT res; + DIR djo, djn; + FATFS *fs; + BYTE buf[_FS_EXFAT ? SZDIRE * 2 : 24], *dir; + DWORD dw; + DEF_NAMBUF + + + get_ldnumber(&path_new); /* Snip drive number of new name off */ + res = find_volume(&path_old, &fs, FA_WRITE); /* Get logical drive of the old object */ + if (res == FR_OK) { + djo.obj.fs = fs; + INIT_NAMBUF(fs); + res = follow_path(&djo, path_old); /* Check old object */ + if (res == FR_OK && (djo.fn[NSFLAG] & (NS_DOT | NS_NONAME))) res = FR_INVALID_NAME; /* Check validity of name */ +#if _FS_LOCK != 0 + if (res == FR_OK) { + res = chk_lock(&djo, 2); + } +#endif + if (res == FR_OK) { /* Object to be renamed is found */ +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { /* At exFAT */ + BYTE nf, nn; + WORD nh; + + mem_cpy(buf, fs->dirbuf, SZDIRE * 2); /* Save 85+C0 entry of old object */ + mem_cpy(&djn, &djo, sizeof djo); + res = follow_path(&djn, path_new); /* Make sure if new object name is not in use */ + if (res == FR_OK) { /* Is new name already in use by any other object? */ + res = (djn.obj.sclust == djo.obj.sclust && djn.dptr == djo.dptr) ? FR_NO_FILE : FR_EXIST; + } + if (res == FR_NO_FILE) { /* It is a valid path and no name collision */ + res = dir_register(&djn); /* Register the new entry */ + if (res == FR_OK) { + nf = fs->dirbuf[XDIR_NumSec]; nn = fs->dirbuf[XDIR_NumName]; + nh = ld_word(fs->dirbuf + XDIR_NameHash); + mem_cpy(fs->dirbuf, buf, SZDIRE * 2); + fs->dirbuf[XDIR_NumSec] = nf; fs->dirbuf[XDIR_NumName] = nn; + st_word(fs->dirbuf + XDIR_NameHash, nh); +/* Start of critical section where an interruption can cause a cross-link */ + res = store_xdir(&djn); + } + } + } else +#endif + { /* At FAT12/FAT16/FAT32 */ + mem_cpy(buf, djo.dir + DIR_Attr, 21); /* Save information about the object except name */ + mem_cpy(&djn, &djo, sizeof (DIR)); /* Duplicate the directory object */ + res = follow_path(&djn, path_new); /* Make sure if new object name is not in use */ + if (res == FR_OK) { /* Is new name already in use by any other object? */ + res = (djn.obj.sclust == djo.obj.sclust && djn.dptr == djo.dptr) ? FR_NO_FILE : FR_EXIST; + } + if (res == FR_NO_FILE) { /* It is a valid path and no name collision */ + res = dir_register(&djn); /* Register the new entry */ + if (res == FR_OK) { + dir = djn.dir; /* Copy information about object except name */ + mem_cpy(dir + 13, buf + 2, 19); + dir[DIR_Attr] = buf[0] | AM_ARC; + fs->wflag = 1; + if ((dir[DIR_Attr] & AM_DIR) && djo.obj.sclust != djn.obj.sclust) { /* Update .. entry in the sub-directory if needed */ + dw = clust2sect(fs, ld_clust(fs, dir)); + if (!dw) { + res = FR_INT_ERR; + } else { +/* Start of critical section where an interruption can cause a cross-link */ + res = move_window(fs, dw); + dir = fs->win + SZDIRE * 1; /* Ptr to .. entry */ + if (res == FR_OK && dir[1] == '.') { + st_clust(fs, dir, djn.obj.sclust); + fs->wflag = 1; + } + } + } + } + } + } + if (res == FR_OK) { + res = dir_remove(&djo); /* Remove old entry */ + if (res == FR_OK) { + res = sync_fs(fs); + } + } +/* End of the critical section */ + } + FREE_NAMBUF(); + } + + LEAVE_FF(fs, res); +} + +#endif /* !_FS_READONLY */ +#endif /* _FS_MINIMIZE == 0 */ +#endif /* _FS_MINIMIZE <= 1 */ +#endif /* _FS_MINIMIZE <= 2 */ + + + +#if _USE_CHMOD && !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* Change Attribute */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_chmod ( + const TCHAR* path, /* Pointer to the file path */ + BYTE attr, /* Attribute bits */ + BYTE mask /* Attribute mask to change */ +) +{ + FRESULT res; + DIR dj; + FATFS *fs; + DEF_NAMBUF + + + res = find_volume(&path, &fs, FA_WRITE); /* Get logical drive */ + dj.obj.fs = fs; + if (res == FR_OK) { + INIT_NAMBUF(fs); + res = follow_path(&dj, path); /* Follow the file path */ + if (res == FR_OK && (dj.fn[NSFLAG] & (NS_DOT | NS_NONAME))) res = FR_INVALID_NAME; /* Check object validity */ + if (res == FR_OK) { + mask &= AM_RDO|AM_HID|AM_SYS|AM_ARC; /* Valid attribute mask */ +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + fs->dirbuf[XDIR_Attr] = (attr & mask) | (fs->dirbuf[XDIR_Attr] & (BYTE)~mask); /* Apply attribute change */ + res = store_xdir(&dj); + } else +#endif + { + dj.dir[DIR_Attr] = (attr & mask) | (dj.dir[DIR_Attr] & (BYTE)~mask); /* Apply attribute change */ + fs->wflag = 1; + } + if (res == FR_OK) { + res = sync_fs(fs); + } + } + FREE_NAMBUF(); + } + + LEAVE_FF(fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Change Timestamp */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_utime ( + const TCHAR* path, /* Pointer to the file/directory name */ + const FILINFO* fno /* Pointer to the time stamp to be set */ +) +{ + FRESULT res; + DIR dj; + FATFS *fs; + DEF_NAMBUF + + + res = find_volume(&path, &fs, FA_WRITE); /* Get logical drive */ + dj.obj.fs = fs; + if (res == FR_OK) { + INIT_NAMBUF(fs); + res = follow_path(&dj, path); /* Follow the file path */ + if (res == FR_OK && (dj.fn[NSFLAG] & (NS_DOT | NS_NONAME))) res = FR_INVALID_NAME; /* Check object validity */ + if (res == FR_OK) { +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + st_dword(fs->dirbuf + XDIR_ModTime, (DWORD)fno->fdate << 16 | fno->ftime); + res = store_xdir(&dj); + } else +#endif + { + st_dword(dj.dir + DIR_ModTime, (DWORD)fno->fdate << 16 | fno->ftime); + fs->wflag = 1; + } + if (res == FR_OK) { + res = sync_fs(fs); + } + } + FREE_NAMBUF(); + } + + LEAVE_FF(fs, res); +} + +#endif /* _USE_CHMOD && !_FS_READONLY */ + + + +#if _USE_LABEL +/*-----------------------------------------------------------------------*/ +/* Get Volume Label */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_getlabel ( + const TCHAR* path, /* Path name of the logical drive number */ + TCHAR* label, /* Pointer to a buffer to return the volume label */ + DWORD* vsn /* Pointer to a variable to return the volume serial number */ +) +{ + FRESULT res; + DIR dj; + FATFS *fs; + UINT si, di; +#if _LFN_UNICODE || _FS_EXFAT + WCHAR w; +#endif + + /* Get logical drive */ + res = find_volume(&path, &fs, 0); + + /* Get volume label */ + if (res == FR_OK && label) { + dj.obj.fs = fs; dj.obj.sclust = 0; /* Open root directory */ + res = dir_sdi(&dj, 0); + if (res == FR_OK) { + res = dir_read(&dj, 1); /* Find a volume label entry */ + if (res == FR_OK) { +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + for (si = di = 0; si < dj.dir[XDIR_NumLabel]; si++) { /* Extract volume label from 83 entry */ + w = ld_word(dj.dir + XDIR_Label + si * 2); +#if _LFN_UNICODE + label[di++] = w; +#else + w = ff_convert(w, 0); /* Unicode -> OEM */ + if (w == 0) w = '?'; /* Replace wrong character */ + if (_DF1S && w >= 0x100) label[di++] = (char)(w >> 8); + label[di++] = (char)w; +#endif + } + label[di] = 0; + } else +#endif + { + si = di = 0; /* Extract volume label from AM_VOL entry with code comversion */ + do { +#if _LFN_UNICODE + w = (si < 11) ? dj.dir[si++] : ' '; + if (IsDBCS1(w) && si < 11 && IsDBCS2(dj.dir[si])) { + w = w << 8 | dj.dir[si++]; + } + label[di++] = ff_convert(w, 1); /* OEM -> Unicode */ +#else + label[di++] = dj.dir[si++]; +#endif + } while (di < 11); + do { /* Truncate trailing spaces */ + label[di] = 0; + if (di == 0) break; + } while (label[--di] == ' '); + } + } + } + if (res == FR_NO_FILE) { /* No label entry and return nul string */ + label[0] = 0; + res = FR_OK; + } + } + + /* Get volume serial number */ + if (res == FR_OK && vsn) { + res = move_window(fs, fs->volbase); + if (res == FR_OK) { + switch (fs->fs_type) { + case FS_EXFAT: + di = BPB_VolIDEx; break; + + case FS_FAT32: + di = BS_VolID32; break; + + default: + di = BS_VolID; + } + *vsn = ld_dword(fs->win + di); + } + } + + LEAVE_FF(fs, res); +} + + + +#if !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* Set Volume Label */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_setlabel ( + const TCHAR* label /* Pointer to the volume label to set */ +) +{ + FRESULT res; + DIR dj; + FATFS *fs; + BYTE dirvn[22]; + UINT i, j, slen; + WCHAR w; + static const char badchr[] = "\"*+,.:;<=>\?[]|\x7F"; + + + /* Get logical drive */ + res = find_volume(&label, &fs, FA_WRITE); + if (res != FR_OK) LEAVE_FF(fs, res); + dj.obj.fs = fs; + + /* Get length of given volume label */ + for (slen = 0; (UINT)label[slen] >= ' '; slen++) ; /* Get name length */ + +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { /* On the exFAT volume */ + for (i = j = 0; i < slen; ) { /* Create volume label in directory form */ + w = label[i++]; +#if !_LFN_UNICODE + if (IsDBCS1(w)) { + w = (i < slen && IsDBCS2(label[i])) ? w << 8 | (BYTE)label[i++] : 0; + } + w = ff_convert(w, 1); +#endif + if (w == 0 || chk_chr(badchr, w) || j == 22) { /* Check validity check validity of the volume label */ + LEAVE_FF(fs, FR_INVALID_NAME); + } + st_word(dirvn + j, w); j += 2; + } + slen = j; + } else +#endif + { /* On the FAT12/16/32 volume */ + for ( ; slen && label[slen - 1] == ' '; slen--) ; /* Remove trailing spaces */ + if (slen) { /* Is there a volume label to be set? */ + dirvn[0] = 0; i = j = 0; /* Create volume label in directory form */ + do { +#if _LFN_UNICODE + w = ff_convert(ff_wtoupper(label[i++]), 0); +#else + w = (BYTE)label[i++]; + if (IsDBCS1(w)) { + w = (j < 10 && i < slen && IsDBCS2(label[i])) ? w << 8 | (BYTE)label[i++] : 0; + } +#if _USE_LFN != 0 + w = ff_convert(ff_wtoupper(ff_convert(w, 1)), 0); +#else + if (IsLower(w)) w -= 0x20; /* To upper ASCII characters */ +#ifdef _EXCVT + if (w >= 0x80) w = ExCvt[w - 0x80]; /* To upper extended characters (SBCS cfg) */ +#else + if (!_DF1S && w >= 0x80) w = 0; /* Reject extended characters (ASCII cfg) */ +#endif +#endif +#endif + if (w == 0 || chk_chr(badchr, w) || j >= (UINT)((w >= 0x100) ? 10 : 11)) { /* Reject invalid characters for volume label */ + LEAVE_FF(fs, FR_INVALID_NAME); + } + if (w >= 0x100) dirvn[j++] = (BYTE)(w >> 8); + dirvn[j++] = (BYTE)w; + } while (i < slen); + while (j < 11) dirvn[j++] = ' '; /* Fill remaining name field */ + if (dirvn[0] == DDEM) LEAVE_FF(fs, FR_INVALID_NAME); /* Reject illegal name (heading DDEM) */ + } + } + + /* Set volume label */ + dj.obj.sclust = 0; /* Open root directory */ + res = dir_sdi(&dj, 0); + if (res == FR_OK) { + res = dir_read(&dj, 1); /* Get volume label entry */ + if (res == FR_OK) { + if (_FS_EXFAT && fs->fs_type == FS_EXFAT) { + dj.dir[XDIR_NumLabel] = (BYTE)(slen / 2); /* Change the volume label */ + mem_cpy(dj.dir + XDIR_Label, dirvn, slen); + } else { + if (slen) { + mem_cpy(dj.dir, dirvn, 11); /* Change the volume label */ + } else { + dj.dir[DIR_Name] = DDEM; /* Remove the volume label */ + } + } + fs->wflag = 1; + res = sync_fs(fs); + } else { /* No volume label entry is found or error */ + if (res == FR_NO_FILE) { + res = FR_OK; + if (slen) { /* Create a volume label entry */ + res = dir_alloc(&dj, 1); /* Allocate an entry */ + if (res == FR_OK) { + mem_set(dj.dir, 0, SZDIRE); /* Clear the entry */ + if (_FS_EXFAT && fs->fs_type == FS_EXFAT) { + dj.dir[XDIR_Type] = 0x83; /* Create 83 entry */ + dj.dir[XDIR_NumLabel] = (BYTE)(slen / 2); + mem_cpy(dj.dir + XDIR_Label, dirvn, slen); + } else { + dj.dir[DIR_Attr] = AM_VOL; /* Create volume label entry */ + mem_cpy(dj.dir, dirvn, 11); + } + fs->wflag = 1; + res = sync_fs(fs); + } + } + } + } + } + + LEAVE_FF(fs, res); +} + +#endif /* !_FS_READONLY */ +#endif /* _USE_LABEL */ + + + +#if _USE_EXPAND && !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* Allocate a Contiguous Blocks to the File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_expand ( + FIL* fp, /* Pointer to the file object */ + FSIZE_t fsz, /* File size to be expanded to */ + BYTE opt /* Operation mode 0:Find and prepare or 1:Find and allocate */ +) +{ + FRESULT res; + FATFS *fs; + DWORD n, clst, stcl, scl, ncl, tcl, lclst; + + + res = validate(&fp->obj, &fs); /* Check validity of the file object */ + if (res != FR_OK || (res = (FRESULT)fp->err) != FR_OK) LEAVE_FF(fs, res); + if (fsz == 0 || fp->obj.objsize != 0 || !(fp->flag & FA_WRITE)) LEAVE_FF(fs, FR_DENIED); +#if _FS_EXFAT + if (fs->fs_type != FS_EXFAT && fsz >= 0x100000000) LEAVE_FF(fs, FR_DENIED); /* Check if in size limit */ +#endif + n = (DWORD)fs->csize * SS(fs); /* Cluster size */ + tcl = (DWORD)(fsz / n) + ((fsz & (n - 1)) ? 1 : 0); /* Number of clusters required */ + stcl = fs->last_clst; lclst = 0; + if (stcl < 2 || stcl >= fs->n_fatent) stcl = 2; + +#if _FS_EXFAT + if (fs->fs_type == FS_EXFAT) { + scl = find_bitmap(fs, stcl, tcl); /* Find a contiguous cluster block */ + if (scl == 0) res = FR_DENIED; /* No contiguous cluster block was found */ + if (scl == 0xFFFFFFFF) res = FR_DISK_ERR; + if (res == FR_OK) { /* A contiguous free area is found */ + if (opt) { /* Allocate it now */ + res = change_bitmap(fs, scl, tcl, 1); /* Mark the cluster block 'in use' */ + lclst = scl + tcl - 1; + } else { /* Set it as suggested point for next allocation */ + lclst = scl - 1; + } + } + } else +#endif + { + scl = clst = stcl; ncl = 0; + for (;;) { /* Find a contiguous cluster block */ + n = get_fat(&fp->obj, clst); + if (++clst >= fs->n_fatent) clst = 2; + if (n == 1) { res = FR_INT_ERR; break; } + if (n == 0xFFFFFFFF) { res = FR_DISK_ERR; break; } + if (n == 0) { /* Is it a free cluster? */ + if (++ncl == tcl) break; /* Break if a contiguous cluster block is found */ + } else { + scl = clst; ncl = 0; /* Not a free cluster */ + } + if (clst == stcl) { res = FR_DENIED; break; } /* No contiguous cluster? */ + } + if (res == FR_OK) { /* A contiguous free area is found */ + if (opt) { /* Allocate it now */ + for (clst = scl, n = tcl; n; clst++, n--) { /* Create a cluster chain on the FAT */ + res = put_fat(fs, clst, (n == 1) ? 0xFFFFFFFF : clst + 1); + if (res != FR_OK) break; + lclst = clst; + } + } else { /* Set it as suggested point for next allocation */ + lclst = scl - 1; + } + } + } + + if (res == FR_OK) { + fs->last_clst = lclst; /* Set suggested start cluster to start next */ + if (opt) { /* Is it allocated now? */ + fp->obj.sclust = scl; /* Update object allocation information */ + fp->obj.objsize = fsz; + if (_FS_EXFAT) fp->obj.stat = 2; /* Set status 'contiguous chain' */ + fp->flag |= FA_MODIFIED; + if (fs->free_clst <= fs->n_fatent - 2) { /* Update FSINFO */ + fs->free_clst -= tcl; + fs->fsi_flag |= 1; + } + } + } + + LEAVE_FF(fs, res); +} + +#endif /* _USE_EXPAND && !_FS_READONLY */ + + + +#if _USE_FORWARD +/*-----------------------------------------------------------------------*/ +/* Forward data to the stream directly */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_forward ( + FIL* fp, /* Pointer to the file object */ + UINT (*func)(const BYTE*,UINT), /* Pointer to the streaming function */ + UINT btf, /* Number of bytes to forward */ + UINT* bf /* Pointer to number of bytes forwarded */ +) +{ + FRESULT res; + FATFS *fs; + DWORD clst, sect; + FSIZE_t remain; + UINT rcnt, csect; + BYTE *dbuf; + + + *bf = 0; /* Clear transfer byte counter */ + res = validate(&fp->obj, &fs); /* Check validity of the file object */ + if (res != FR_OK || (res = (FRESULT)fp->err) != FR_OK) LEAVE_FF(fs, res); + if (!(fp->flag & FA_READ)) LEAVE_FF(fs, FR_DENIED); /* Check access mode */ + + remain = fp->obj.objsize - fp->fptr; + if (btf > remain) btf = (UINT)remain; /* Truncate btf by remaining bytes */ + + for ( ; btf && (*func)(0, 0); /* Repeat until all data transferred or stream goes busy */ + fp->fptr += rcnt, *bf += rcnt, btf -= rcnt) { + csect = (UINT)(fp->fptr / SS(fs) & (fs->csize - 1)); /* Sector offset in the cluster */ + if (fp->fptr % SS(fs) == 0) { /* On the sector boundary? */ + if (csect == 0) { /* On the cluster boundary? */ + clst = (fp->fptr == 0) ? /* On the top of the file? */ + fp->obj.sclust : get_fat(&fp->obj, fp->clust); + if (clst <= 1) ABORT(fs, FR_INT_ERR); + if (clst == 0xFFFFFFFF) ABORT(fs, FR_DISK_ERR); + fp->clust = clst; /* Update current cluster */ + } + } + sect = clust2sect(fs, fp->clust); /* Get current data sector */ + if (!sect) ABORT(fs, FR_INT_ERR); + sect += csect; +#if _FS_TINY + if (move_window(fs, sect) != FR_OK) ABORT(fs, FR_DISK_ERR); /* Move sector window to the file data */ + dbuf = fs->win; +#else + if (fp->sect != sect) { /* Fill sector cache with file data */ +#if !_FS_READONLY + if (fp->flag & FA_DIRTY) { /* Write-back dirty sector cache */ + if (disk_write(fs->drv, fp->buf, fp->sect, 1) != RES_OK) ABORT(fs, FR_DISK_ERR); + fp->flag &= (BYTE)~FA_DIRTY; + } +#endif + if (disk_read(fs->drv, fp->buf, sect, 1) != RES_OK) ABORT(fs, FR_DISK_ERR); + } + dbuf = fp->buf; +#endif + fp->sect = sect; + rcnt = SS(fs) - (UINT)fp->fptr % SS(fs); /* Number of bytes left in the sector */ + if (rcnt > btf) rcnt = btf; /* Clip it by btr if needed */ + rcnt = (*func)(dbuf + ((UINT)fp->fptr % SS(fs)), rcnt); /* Forward the file data */ + if (!rcnt) ABORT(fs, FR_INT_ERR); + } + + LEAVE_FF(fs, FR_OK); +} +#endif /* _USE_FORWARD */ + + + +#if _USE_MKFS && !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* Create an FAT/exFAT volume */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_mkfs ( + const TCHAR* path, /* Logical drive number */ + BYTE opt, /* Format option */ + DWORD au, /* Size of allocation unit (cluster) [byte] */ + void* work, /* Pointer to working buffer */ + UINT len /* Size of working buffer */ +) +{ + const UINT n_fats = 1; /* Number of FATs for FAT12/16/32 volume (1 or 2) */ + const UINT n_rootdir = 512; /* Number of root directory entries for FAT12/16 volume */ + static const WORD cst[] = {1, 4, 16, 64, 256, 512, 0}; /* Cluster size boundary for FAT12/16 volume (4Ks unit) */ + static const WORD cst32[] = {1, 2, 4, 8, 16, 32, 0}; /* Cluster size boundary for FAT32 volume (128Ks unit) */ + BYTE fmt, sys, *buf, *pte, pdrv, part; + WORD ss; + DWORD szb_buf, sz_buf, sz_blk, n_clst, pau, sect, nsect, n; + DWORD b_vol, b_fat, b_data; /* Base LBA for volume, fat, data */ + DWORD sz_vol, sz_rsv, sz_fat, sz_dir; /* Size for volume, fat, dir, data */ + UINT i; + int vol; + DSTATUS stat; +#if _USE_TRIM || _FS_EXFAT + DWORD tbl[3]; +#endif + + + /* Check mounted drive and clear work area */ + vol = get_ldnumber(&path); /* Get target logical drive */ + if (vol < 0) return FR_INVALID_DRIVE; + if (FatFs[vol]) FatFs[vol]->fs_type = 0; /* Clear the volume */ + pdrv = LD2PD(vol); /* Physical drive */ + part = LD2PT(vol); /* Partition (0:create as new, 1-4:get from partition table) */ + + /* Check physical drive status */ + stat = disk_initialize(pdrv); + if (stat & STA_NOINIT) return FR_NOT_READY; + if (stat & STA_PROTECT) return FR_WRITE_PROTECTED; + if (disk_ioctl(pdrv, GET_BLOCK_SIZE, &sz_blk) != RES_OK || !sz_blk || sz_blk > 32768 || (sz_blk & (sz_blk - 1))) sz_blk = 1; /* Erase block to align data area */ +#if _MAX_SS != _MIN_SS /* Get sector size of the medium if variable sector size cfg. */ + if (disk_ioctl(pdrv, GET_SECTOR_SIZE, &ss) != RES_OK) return FR_DISK_ERR; + if (ss > _MAX_SS || ss < _MIN_SS || (ss & (ss - 1))) return FR_DISK_ERR; +#else + ss = _MAX_SS; +#endif + if ((au != 0 && au < ss) || au > 0x1000000 || (au & (au - 1))) return FR_INVALID_PARAMETER; /* Check if au is valid */ + au /= ss; /* Cluster size in unit of sector */ + + /* Get working buffer */ + buf = (BYTE*)work; /* Working buffer */ + sz_buf = len / ss; /* Size of working buffer (sector) */ + szb_buf = sz_buf * ss; /* Size of working buffer (byte) */ + if (!szb_buf) return FR_MKFS_ABORTED; + + /* Determine where the volume to be located (b_vol, sz_vol) */ + if (_MULTI_PARTITION && part != 0) { + /* Get partition information from partition table in the MBR */ + if (disk_read(pdrv, buf, 0, 1) != RES_OK) return FR_DISK_ERR; /* Load MBR */ + if (ld_word(buf + BS_55AA) != 0xAA55) return FR_MKFS_ABORTED; /* Check if MBR is valid */ + pte = buf + (MBR_Table + (part - 1) * SZ_PTE); + if (!pte[PTE_System]) return FR_MKFS_ABORTED; /* No partition? */ + b_vol = ld_dword(pte + PTE_StLba); /* Get volume start sector */ + sz_vol = ld_dword(pte + PTE_SizLba); /* Get volume size */ + } else { + /* Create a single-partition in this function */ + if (disk_ioctl(pdrv, GET_SECTOR_COUNT, &sz_vol) != RES_OK) return FR_DISK_ERR; + b_vol = (opt & FM_SFD) ? 0 : 63; /* Volume start sector */ + if (sz_vol < b_vol) return FR_MKFS_ABORTED; + sz_vol -= b_vol; /* Volume size */ + } + if (sz_vol < 128) return FR_MKFS_ABORTED; /* Check if volume size is >=128s */ + + /* Pre-determine the FAT type */ + do { + if (_FS_EXFAT && (opt & FM_EXFAT)) { /* exFAT possible? */ + if ((opt & FM_ANY) == FM_EXFAT || sz_vol >= 0x4000000 || au > 128) { /* exFAT only, vol >= 64Ms or au > 128s ? */ + fmt = FS_EXFAT; break; + } + } + if (au > 128) return FR_INVALID_PARAMETER; /* Too large au for FAT/FAT32 */ + if (opt & FM_FAT32) { /* FAT32 possible? */ + if ((opt & FM_ANY) == FM_FAT32 || !(opt & FM_FAT)) { /* FAT32 only or no-FAT? */ + fmt = FS_FAT32; break; + } + } + if (!(opt & FM_FAT)) return FR_INVALID_PARAMETER; /* no-FAT? */ + fmt = FS_FAT16; + } while (0); + +#if _FS_EXFAT + if (fmt == FS_EXFAT) { /* Create an exFAT volume */ + DWORD szb_bit, szb_case, sum, nb, cl; + WCHAR ch, si; + UINT j, st; + BYTE b; + + if (sz_vol < 0x1000) return FR_MKFS_ABORTED; /* Too small volume? */ +#if _USE_TRIM + tbl[0] = b_vol; tbl[1] = b_vol + sz_vol - 1; /* Inform the device the volume area may be erased */ + disk_ioctl(pdrv, CTRL_TRIM, tbl); +#endif + /* Determine FAT location, data location and number of clusters */ + if (!au) { /* au auto-selection */ + au = 8; + if (sz_vol >= 0x80000) au = 64; /* >= 512Ks */ + if (sz_vol >= 0x4000000) au = 256; /* >= 64Ms */ + } + b_fat = b_vol + 32; /* FAT start at offset 32 */ + sz_fat = ((sz_vol / au + 2) * 4 + ss - 1) / ss; /* Number of FAT sectors */ + b_data = (b_fat + sz_fat + sz_blk - 1) & ~(sz_blk - 1); /* Align data area to the erase block boundary */ + if (b_data >= sz_vol / 2) return FR_MKFS_ABORTED; /* Too small volume? */ + n_clst = (sz_vol - (b_data - b_vol)) / au; /* Number of clusters */ + if (n_clst <16) return FR_MKFS_ABORTED; /* Too few clusters? */ + if (n_clst > MAX_EXFAT) return FR_MKFS_ABORTED; /* Too many clusters? */ + + szb_bit = (n_clst + 7) / 8; /* Size of allocation bitmap */ + tbl[0] = (szb_bit + au * ss - 1) / (au * ss); /* Number of allocation bitmap clusters */ + + /* Create a compressed up-case table */ + sect = b_data + au * tbl[0]; /* Table start sector */ + sum = 0; /* Table checksum to be stored in the 82 entry */ + st = si = i = j = szb_case = 0; + do { + switch (st) { + case 0: + ch = ff_wtoupper(si); /* Get an up-case char */ + if (ch != si) { + si++; break; /* Store the up-case char if exist */ + } + for (j = 1; (WCHAR)(si + j) && (WCHAR)(si + j) == ff_wtoupper((WCHAR)(si + j)); j++) ; /* Get run length of no-case block */ + if (j >= 128) { + ch = 0xFFFF; st = 2; break; /* Compress the no-case block if run is >= 128 */ + } + st = 1; /* Do not compress short run */ + /* go to next case */ + case 1: + ch = si++; /* Fill the short run */ + if (--j == 0) st = 0; + break; + + default: + ch = (WCHAR)j; si += j; /* Number of chars to skip */ + st = 0; + } + sum = xsum32(buf[i + 0] = (BYTE)ch, sum); /* Put it into the write buffer */ + sum = xsum32(buf[i + 1] = (BYTE)(ch >> 8), sum); + i += 2; szb_case += 2; + if (!si || i == szb_buf) { /* Write buffered data when buffer full or end of process */ + n = (i + ss - 1) / ss; + if (disk_write(pdrv, buf, sect, n) != RES_OK) return FR_DISK_ERR; + sect += n; i = 0; + } + } while (si); + tbl[1] = (szb_case + au * ss - 1) / (au * ss); /* Number of up-case table clusters */ + tbl[2] = 1; /* Number of root dir clusters */ + + /* Initialize the allocation bitmap */ + sect = b_data; nsect = (szb_bit + ss - 1) / ss; /* Start of bitmap and number of sectors */ + nb = tbl[0] + tbl[1] + tbl[2]; /* Number of clusters in-use by system */ + do { + mem_set(buf, 0, szb_buf); + for (i = 0; nb >= 8 && i < szb_buf; buf[i++] = 0xFF, nb -= 8) ; + for (b = 1; nb && i < szb_buf; buf[i] |= b, b <<= 1, nb--) ; + n = (nsect > sz_buf) ? sz_buf : nsect; /* Write the buffered data */ + if (disk_write(pdrv, buf, sect, n) != RES_OK) return FR_DISK_ERR; + sect += n; nsect -= n; + } while (nsect); + + /* Initialize the FAT */ + sect = b_fat; nsect = sz_fat; /* Start of FAT and number of FAT sectors */ + j = nb = cl = 0; + do { + mem_set(buf, 0, szb_buf); i = 0; /* Clear work area and reset write index */ + if (cl == 0) { /* Set entry 0 and 1 */ + st_dword(buf + i, 0xFFFFFFF8); i += 4; cl++; + st_dword(buf + i, 0xFFFFFFFF); i += 4; cl++; + } + do { /* Create chains of bitmap, up-case and root dir */ + while (nb && i < szb_buf) { /* Create a chain */ + st_dword(buf + i, (nb > 1) ? cl + 1 : 0xFFFFFFFF); + i += 4; cl++; nb--; + } + if (!nb && j < 3) nb = tbl[j++]; /* Next chain */ + } while (nb && i < szb_buf); + n = (nsect > sz_buf) ? sz_buf : nsect; /* Write the buffered data */ + if (disk_write(pdrv, buf, sect, n) != RES_OK) return FR_DISK_ERR; + sect += n; nsect -= n; + } while (nsect); + + /* Initialize the root directory */ + mem_set(buf, 0, szb_buf); + buf[SZDIRE * 0 + 0] = 0x83; /* 83 entry (volume label) */ + buf[SZDIRE * 1 + 0] = 0x81; /* 81 entry (allocation bitmap) */ + st_dword(buf + SZDIRE * 1 + 20, 2); + st_dword(buf + SZDIRE * 1 + 24, szb_bit); + buf[SZDIRE * 2 + 0] = 0x82; /* 82 entry (up-case table) */ + st_dword(buf + SZDIRE * 2 + 4, sum); + st_dword(buf + SZDIRE * 2 + 20, 2 + tbl[0]); + st_dword(buf + SZDIRE * 2 + 24, szb_case); + sect = b_data + au * (tbl[0] + tbl[1]); nsect = au; /* Start of the root directory and number of sectors */ + do { /* Fill root directory sectors */ + n = (nsect > sz_buf) ? sz_buf : nsect; + if (disk_write(pdrv, buf, sect, n) != RES_OK) return FR_DISK_ERR; + mem_set(buf, 0, ss); + sect += n; nsect -= n; + } while (nsect); + + /* Create two set of the exFAT VBR blocks */ + sect = b_vol; + for (n = 0; n < 2; n++) { + /* Main record (+0) */ + mem_set(buf, 0, ss); + mem_cpy(buf + BS_JmpBoot, "\xEB\x76\x90" "EXFAT ", 11); /* Boot jump code (x86), OEM name */ + st_dword(buf + BPB_VolOfsEx, b_vol); /* Volume offset in the physical drive [sector] */ + st_dword(buf + BPB_TotSecEx, sz_vol); /* Volume size [sector] */ + st_dword(buf + BPB_FatOfsEx, b_fat - b_vol); /* FAT offset [sector] */ + st_dword(buf + BPB_FatSzEx, sz_fat); /* FAT size [sector] */ + st_dword(buf + BPB_DataOfsEx, b_data - b_vol); /* Data offset [sector] */ + st_dword(buf + BPB_NumClusEx, n_clst); /* Number of clusters */ + st_dword(buf + BPB_RootClusEx, 2 + tbl[0] + tbl[1]); /* Root dir cluster # */ + st_dword(buf + BPB_VolIDEx, GET_FATTIME()); /* VSN */ + st_word(buf + BPB_FSVerEx, 0x100); /* File system version (1.00) */ + for (buf[BPB_BytsPerSecEx] = 0, i = ss; i >>= 1; buf[BPB_BytsPerSecEx]++) ; /* Log2 of sector size [byte] */ + for (buf[BPB_SecPerClusEx] = 0, i = au; i >>= 1; buf[BPB_SecPerClusEx]++) ; /* Log2 of cluster size [sector] */ + buf[BPB_NumFATsEx] = 1; /* Number of FATs */ + buf[BPB_DrvNumEx] = 0x80; /* Drive number (for int13) */ + st_word(buf + BS_BootCodeEx, 0xFEEB); /* Boot code (x86) */ + st_word(buf + BS_55AA, 0xAA55); /* Signature (placed here regardless of sector size) */ + for (i = sum = 0; i < ss; i++) { /* VBR checksum */ + if (i != BPB_VolFlagEx && i != BPB_VolFlagEx + 1 && i != BPB_PercInUseEx) sum = xsum32(buf[i], sum); + } + if (disk_write(pdrv, buf, sect++, 1) != RES_OK) return FR_DISK_ERR; + /* Extended bootstrap record (+1..+8) */ + mem_set(buf, 0, ss); + st_word(buf + ss - 2, 0xAA55); /* Signature (placed at end of sector) */ + for (j = 1; j < 9; j++) { + for (i = 0; i < ss; sum = xsum32(buf[i++], sum)) ; /* VBR checksum */ + if (disk_write(pdrv, buf, sect++, 1) != RES_OK) return FR_DISK_ERR; + } + /* OEM/Reserved record (+9..+10) */ + mem_set(buf, 0, ss); + for ( ; j < 11; j++) { + for (i = 0; i < ss; sum = xsum32(buf[i++], sum)) ; /* VBR checksum */ + if (disk_write(pdrv, buf, sect++, 1) != RES_OK) return FR_DISK_ERR; + } + /* Sum record (+11) */ + for (i = 0; i < ss; i += 4) st_dword(buf + i, sum); /* Fill with checksum value */ + if (disk_write(pdrv, buf, sect++, 1) != RES_OK) return FR_DISK_ERR; + } + + } else +#endif /* _FS_EXFAT */ + { /* Create an FAT12/16/32 volume */ + do { + pau = au; + /* Pre-determine number of clusters and FAT sub-type */ + if (fmt == FS_FAT32) { /* FAT32 volume */ + if (!pau) { /* au auto-selection */ + n = sz_vol / 0x20000; /* Volume size in unit of 128KS */ + for (i = 0, pau = 1; cst32[i] && cst32[i] <= n; i++, pau <<= 1) ; /* Get from table */ + } + n_clst = sz_vol / pau; /* Number of clusters */ + sz_fat = (n_clst * 4 + 8 + ss - 1) / ss; /* FAT size [sector] */ + sz_rsv = 32; /* Number of reserved sectors */ + sz_dir = 0; /* No static directory */ + if (n_clst <= MAX_FAT16 || n_clst > MAX_FAT32) return FR_MKFS_ABORTED; + } else { /* FAT12/16 volume */ + if (!pau) { /* au auto-selection */ + n = sz_vol / 0x1000; /* Volume size in unit of 4KS */ + for (i = 0, pau = 1; cst[i] && cst[i] <= n; i++, pau <<= 1) ; /* Get from table */ + } + n_clst = sz_vol / pau; + if (n_clst > MAX_FAT12) { + n = n_clst * 2 + 4; /* FAT size [byte] */ + } else { + fmt = FS_FAT12; + n = (n_clst * 3 + 1) / 2 + 3; /* FAT size [byte] */ + } + sz_fat = (n + ss - 1) / ss; /* FAT size [sector] */ + sz_rsv = 1; /* Number of reserved sectors */ + sz_dir = (DWORD)n_rootdir * SZDIRE / ss; /* Rootdir size [sector] */ + } + b_fat = b_vol + sz_rsv; /* FAT base */ + b_data = b_fat + sz_fat * n_fats + sz_dir; /* Data base */ + + /* Align data base to erase block boundary (for flash memory media) */ + n = ((b_data + sz_blk - 1) & ~(sz_blk - 1)) - b_data; /* Next nearest erase block from current data base */ + if (fmt == FS_FAT32) { /* FAT32: Move FAT base */ + sz_rsv += n; b_fat += n; + } else { /* FAT12/16: Expand FAT size */ + sz_fat += n / n_fats; + } + + /* Determine number of clusters and final check of validity of the FAT sub-type */ + if (sz_vol < b_data + pau * 16 - b_vol) return FR_MKFS_ABORTED; /* Too small volume */ + n_clst = (sz_vol - sz_rsv - sz_fat * n_fats - sz_dir) / pau; + if (fmt == FS_FAT32) { + if (n_clst <= MAX_FAT16) { /* Too few clusters for FAT32 */ + if (!au && (au = pau / 2) != 0) continue; /* Adjust cluster size and retry */ + return FR_MKFS_ABORTED; + } + } + if (fmt == FS_FAT16) { + if (n_clst > MAX_FAT16) { /* Too many clusters for FAT16 */ + if (!au && (pau * 2) <= 64) { + au = pau * 2; continue; /* Adjust cluster size and retry */ + } + if ((opt & FM_FAT32)) { + fmt = FS_FAT32; continue; /* Switch type to FAT32 and retry */ + } + if (!au && (au = pau * 2) <= 128) continue; /* Adjust cluster size and retry */ + return FR_MKFS_ABORTED; + } + if (n_clst <= MAX_FAT12) { /* Too few clusters for FAT16 */ + if (!au && (au = pau * 2) <= 128) continue; /* Adjust cluster size and retry */ + return FR_MKFS_ABORTED; + } + } + if (fmt == FS_FAT12 && n_clst > MAX_FAT12) return FR_MKFS_ABORTED; /* Too many clusters for FAT12 */ + + /* Ok, it is the valid cluster configuration */ + break; + } while (1); + +#if _USE_TRIM + tbl[0] = b_vol; tbl[1] = b_vol + sz_vol - 1; /* Inform the device the volume area can be erased */ + disk_ioctl(pdrv, CTRL_TRIM, tbl); +#endif + /* Create FAT VBR */ + mem_set(buf, 0, ss); + mem_cpy(buf + BS_JmpBoot, "\xEB\xFE\x90" "MSDOS5.0", 11);/* Boot jump code (x86), OEM name */ + st_word(buf + BPB_BytsPerSec, ss); /* Sector size [byte] */ + buf[BPB_SecPerClus] = (BYTE)pau; /* Cluster size [sector] */ + st_word(buf + BPB_RsvdSecCnt, (WORD)sz_rsv); /* Size of reserved area */ + buf[BPB_NumFATs] = (BYTE)n_fats; /* Number of FATs */ + st_word(buf + BPB_RootEntCnt, (WORD)((fmt == FS_FAT32) ? 0 : n_rootdir)); /* Number of root directory entries */ + if (sz_vol < 0x10000) { + st_word(buf + BPB_TotSec16, (WORD)sz_vol); /* Volume size in 16-bit LBA */ + } else { + st_dword(buf + BPB_TotSec32, sz_vol); /* Volume size in 32-bit LBA */ + } + buf[BPB_Media] = 0xF8; /* Media descriptor byte */ + st_word(buf + BPB_SecPerTrk, 63); /* Number of sectors per track (for int13) */ + st_word(buf + BPB_NumHeads, 255); /* Number of heads (for int13) */ + st_dword(buf + BPB_HiddSec, b_vol); /* Volume offset in the physical drive [sector] */ + if (fmt == FS_FAT32) { + st_dword(buf + BS_VolID32, GET_FATTIME()); /* VSN */ + st_dword(buf + BPB_FATSz32, sz_fat); /* FAT size [sector] */ + st_dword(buf + BPB_RootClus32, 2); /* Root directory cluster # (2) */ + st_word(buf + BPB_FSInfo32, 1); /* Offset of FSINFO sector (VBR + 1) */ + st_word(buf + BPB_BkBootSec32, 6); /* Offset of backup VBR (VBR + 6) */ + buf[BS_DrvNum32] = 0x80; /* Drive number (for int13) */ + buf[BS_BootSig32] = 0x29; /* Extended boot signature */ + mem_cpy(buf + BS_VolLab32, "NO NAME " "FAT32 ", 19); /* Volume label, FAT signature */ + } else { + st_dword(buf + BS_VolID, GET_FATTIME()); /* VSN */ + st_word(buf + BPB_FATSz16, (WORD)sz_fat); /* FAT size [sector] */ + buf[BS_DrvNum] = 0x80; /* Drive number (for int13) */ + buf[BS_BootSig] = 0x29; /* Extended boot signature */ + mem_cpy(buf + BS_VolLab, "NO NAME " "FAT ", 19); /* Volume label, FAT signature */ + } + st_word(buf + BS_55AA, 0xAA55); /* Signature (offset is fixed here regardless of sector size) */ + if (disk_write(pdrv, buf, b_vol, 1) != RES_OK) return FR_DISK_ERR; /* Write it to the VBR sector */ + + /* Create FSINFO record if needed */ + if (fmt == FS_FAT32) { + disk_write(pdrv, buf, b_vol + 6, 1); /* Write backup VBR (VBR + 6) */ + mem_set(buf, 0, ss); + st_dword(buf + FSI_LeadSig, 0x41615252); + st_dword(buf + FSI_StrucSig, 0x61417272); + st_dword(buf + FSI_Free_Count, n_clst - 1); /* Number of free clusters */ + st_dword(buf + FSI_Nxt_Free, 2); /* Last allocated cluster# */ + st_word(buf + BS_55AA, 0xAA55); + disk_write(pdrv, buf, b_vol + 7, 1); /* Write backup FSINFO (VBR + 7) */ + disk_write(pdrv, buf, b_vol + 1, 1); /* Write original FSINFO (VBR + 1) */ + } + + /* Initialize FAT area */ + mem_set(buf, 0, (UINT)szb_buf); + sect = b_fat; /* FAT start sector */ + for (i = 0; i < n_fats; i++) { /* Initialize FATs each */ + if (fmt == FS_FAT32) { + st_dword(buf + 0, 0xFFFFFFF8); /* Entry 0 */ + st_dword(buf + 4, 0xFFFFFFFF); /* Entry 1 */ + st_dword(buf + 8, 0x0FFFFFFF); /* Entry 2 (root directory) */ + } else { + st_dword(buf + 0, (fmt == FS_FAT12) ? 0xFFFFF8 : 0xFFFFFFF8); /* Entry 0 and 1 */ + } + nsect = sz_fat; /* Number of FAT sectors */ + do { /* Fill FAT sectors */ + n = (nsect > sz_buf) ? sz_buf : nsect; + if (disk_write(pdrv, buf, sect, (UINT)n) != RES_OK) return FR_DISK_ERR; + mem_set(buf, 0, ss); + sect += n; nsect -= n; + } while (nsect); + } + + /* Initialize root directory (fill with zero) */ + nsect = (fmt == FS_FAT32) ? pau : sz_dir; /* Number of root directory sectors */ + do { + n = (nsect > sz_buf) ? sz_buf : nsect; + if (disk_write(pdrv, buf, sect, (UINT)n) != RES_OK) return FR_DISK_ERR; + sect += n; nsect -= n; + } while (nsect); + } + + /* Determine system ID in the partition table */ + if (_FS_EXFAT && fmt == FS_EXFAT) { + sys = 0x07; /* HPFS/NTFS/exFAT */ + } else { + if (fmt == FS_FAT32) { + sys = 0x0C; /* FAT32X */ + } else { + if (sz_vol >= 0x10000) { + sys = 0x06; /* FAT12/16 (>=64KS) */ + } else { + sys = (fmt == FS_FAT16) ? 0x04 : 0x01; /* FAT16 (<64KS) : FAT12 (<64KS) */ + } + } + } + + /* Update partition information */ + if (_MULTI_PARTITION && part != 0) { /* Created in the existing partition */ + /* Update system ID in the partition table */ + if (disk_read(pdrv, buf, 0, 1) != RES_OK) return FR_DISK_ERR; /* Read the MBR */ + buf[MBR_Table + (part - 1) * SZ_PTE + PTE_System] = sys; /* Set system ID */ + if (disk_write(pdrv, buf, 0, 1) != RES_OK) return FR_DISK_ERR; /* Write it back to the MBR */ + } else { /* Created as a new single partition */ + if (!(opt & FM_SFD)) { /* Create partition table if in FDISK format */ + mem_set(buf, 0, ss); + st_word(buf + BS_55AA, 0xAA55); /* MBR signature */ + pte = buf + MBR_Table; /* Create partition table for single partition in the drive */ + pte[PTE_Boot] = 0; /* Boot indicator */ + pte[PTE_StHead] = 1; /* Start head */ + pte[PTE_StSec] = 1; /* Start sector */ + pte[PTE_StCyl] = 0; /* Start cylinder */ + pte[PTE_System] = sys; /* System type */ + n = (b_vol + sz_vol) / (63 * 255); /* (End CHS may be invalid) */ + pte[PTE_EdHead] = 254; /* End head */ + pte[PTE_EdSec] = (BYTE)(n >> 2 | 63); /* End sector */ + pte[PTE_EdCyl] = (BYTE)n; /* End cylinder */ + st_dword(pte + PTE_StLba, b_vol); /* Start offset in LBA */ + st_dword(pte + PTE_SizLba, sz_vol); /* Size in sectors */ + if (disk_write(pdrv, buf, 0, 1) != RES_OK) return FR_DISK_ERR; /* Write it to the MBR */ + } + } + + if (disk_ioctl(pdrv, CTRL_SYNC, 0) != RES_OK) return FR_DISK_ERR; + + return FR_OK; +} + + + +#if _MULTI_PARTITION +/*-----------------------------------------------------------------------*/ +/* Create partition table on the physical drive */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_fdisk ( + BYTE pdrv, /* Physical drive number */ + const DWORD* szt, /* Pointer to the size table for each partitions */ + void* work /* Pointer to the working buffer */ +) +{ + UINT i, n, sz_cyl, tot_cyl, b_cyl, e_cyl, p_cyl; + BYTE s_hd, e_hd, *p, *buf = (BYTE*)work; + DSTATUS stat; + DWORD sz_disk, sz_part, s_part; + + + stat = disk_initialize(pdrv); + if (stat & STA_NOINIT) return FR_NOT_READY; + if (stat & STA_PROTECT) return FR_WRITE_PROTECTED; + if (disk_ioctl(pdrv, GET_SECTOR_COUNT, &sz_disk)) return FR_DISK_ERR; + + /* Determine the CHS without any consideration of the drive geometry */ + for (n = 16; n < 256 && sz_disk / n / 63 > 1024; n *= 2) ; + if (n == 256) n--; + e_hd = n - 1; + sz_cyl = 63 * n; + tot_cyl = sz_disk / sz_cyl; + + /* Create partition table */ + mem_set(buf, 0, _MAX_SS); + p = buf + MBR_Table; b_cyl = 0; + for (i = 0; i < 4; i++, p += SZ_PTE) { + p_cyl = (szt[i] <= 100U) ? (DWORD)tot_cyl * szt[i] / 100 : szt[i] / sz_cyl; /* Number of cylinders */ + if (!p_cyl) continue; + s_part = (DWORD)sz_cyl * b_cyl; + sz_part = (DWORD)sz_cyl * p_cyl; + if (i == 0) { /* Exclude first track of cylinder 0 */ + s_hd = 1; + s_part += 63; sz_part -= 63; + } else { + s_hd = 0; + } + e_cyl = b_cyl + p_cyl - 1; /* End cylinder */ + if (e_cyl >= tot_cyl) return FR_INVALID_PARAMETER; + + /* Set partition table */ + p[1] = s_hd; /* Start head */ + p[2] = (BYTE)((b_cyl >> 2) + 1); /* Start sector */ + p[3] = (BYTE)b_cyl; /* Start cylinder */ + p[4] = 0x07; /* System type (temporary setting) */ + p[5] = e_hd; /* End head */ + p[6] = (BYTE)((e_cyl >> 2) + 63); /* End sector */ + p[7] = (BYTE)e_cyl; /* End cylinder */ + st_dword(p + 8, s_part); /* Start sector in LBA */ + st_dword(p + 12, sz_part); /* Number of sectors */ + + /* Next partition */ + b_cyl += p_cyl; + } + st_word(p, 0xAA55); + + /* Write it to the MBR */ + return (disk_write(pdrv, buf, 0, 1) != RES_OK || disk_ioctl(pdrv, CTRL_SYNC, 0) != RES_OK) ? FR_DISK_ERR : FR_OK; +} + +#endif /* _MULTI_PARTITION */ +#endif /* _USE_MKFS && !_FS_READONLY */ + + + + +#if _USE_STRFUNC +/*-----------------------------------------------------------------------*/ +/* Get a string from the file */ +/*-----------------------------------------------------------------------*/ + +TCHAR* f_gets ( + TCHAR* buff, /* Pointer to the string buffer to read */ + int len, /* Size of string buffer (characters) */ + FIL* fp /* Pointer to the file object */ +) +{ + int n = 0; + TCHAR c, *p = buff; + BYTE s[2]; + UINT rc; + + + while (n < len - 1) { /* Read characters until buffer gets filled */ +#if _LFN_UNICODE +#if _STRF_ENCODE == 3 /* Read a character in UTF-8 */ + f_read(fp, s, 1, &rc); + if (rc != 1) break; + c = s[0]; + if (c >= 0x80) { + if (c < 0xC0) continue; /* Skip stray trailer */ + if (c < 0xE0) { /* Two-byte sequence (0x80-0x7FF) */ + f_read(fp, s, 1, &rc); + if (rc != 1) break; + c = (c & 0x1F) << 6 | (s[0] & 0x3F); + if (c < 0x80) c = '?'; /* Reject invalid code range */ + } else { + if (c < 0xF0) { /* Three-byte sequence (0x800-0xFFFF) */ + f_read(fp, s, 2, &rc); + if (rc != 2) break; + c = c << 12 | (s[0] & 0x3F) << 6 | (s[1] & 0x3F); + if (c < 0x800) c = '?'; /* Reject invalid code range */ + } else { /* Reject four-byte sequence */ + c = '?'; + } + } + } +#elif _STRF_ENCODE == 2 /* Read a character in UTF-16BE */ + f_read(fp, s, 2, &rc); + if (rc != 2) break; + c = s[1] + (s[0] << 8); +#elif _STRF_ENCODE == 1 /* Read a character in UTF-16LE */ + f_read(fp, s, 2, &rc); + if (rc != 2) break; + c = s[0] + (s[1] << 8); +#else /* Read a character in ANSI/OEM */ + f_read(fp, s, 1, &rc); + if (rc != 1) break; + c = s[0]; + if (IsDBCS1(c)) { + f_read(fp, s, 1, &rc); + if (rc != 1) break; + c = (c << 8) + s[0]; + } + c = ff_convert(c, 1); /* OEM -> Unicode */ + if (!c) c = '?'; +#endif +#else /* Read a character without conversion */ + f_read(fp, s, 1, &rc); + if (rc != 1) break; + c = s[0]; +#endif + if (_USE_STRFUNC == 2 && c == '\r') continue; /* Strip '\r' */ + *p++ = c; + n++; + if (c == '\n') break; /* Break on EOL */ + } + *p = 0; + return n ? buff : 0; /* When no data read (eof or error), return with error. */ +} + + + + +#if !_FS_READONLY +#include +/*-----------------------------------------------------------------------*/ +/* Put a character to the file */ +/*-----------------------------------------------------------------------*/ + +typedef struct { + FIL *fp; /* Ptr to the writing file */ + int idx, nchr; /* Write index of buf[] (-1:error), number of chars written */ + BYTE buf[64]; /* Write buffer */ +} putbuff; + + +static +void putc_bfd ( /* Buffered write with code conversion */ + putbuff* pb, + TCHAR c +) +{ + UINT bw; + int i; + + + if (_USE_STRFUNC == 2 && c == '\n') { /* LF -> CRLF conversion */ + putc_bfd(pb, '\r'); + } + + i = pb->idx; /* Write index of pb->buf[] */ + if (i < 0) return; + +#if _LFN_UNICODE +#if _STRF_ENCODE == 3 /* Write a character in UTF-8 */ + if (c < 0x80) { /* 7-bit */ + pb->buf[i++] = (BYTE)c; + } else { + if (c < 0x800) { /* 11-bit */ + pb->buf[i++] = (BYTE)(0xC0 | c >> 6); + } else { /* 16-bit */ + pb->buf[i++] = (BYTE)(0xE0 | c >> 12); + pb->buf[i++] = (BYTE)(0x80 | (c >> 6 & 0x3F)); + } + pb->buf[i++] = (BYTE)(0x80 | (c & 0x3F)); + } +#elif _STRF_ENCODE == 2 /* Write a character in UTF-16BE */ + pb->buf[i++] = (BYTE)(c >> 8); + pb->buf[i++] = (BYTE)c; +#elif _STRF_ENCODE == 1 /* Write a character in UTF-16LE */ + pb->buf[i++] = (BYTE)c; + pb->buf[i++] = (BYTE)(c >> 8); +#else /* Write a character in ANSI/OEM */ + c = ff_convert(c, 0); /* Unicode -> OEM */ + if (!c) c = '?'; + if (c >= 0x100) + pb->buf[i++] = (BYTE)(c >> 8); + pb->buf[i++] = (BYTE)c; +#endif +#else /* Write a character without conversion */ + pb->buf[i++] = (BYTE)c; +#endif + + if (i >= (int)(sizeof pb->buf) - 3) { /* Write buffered characters to the file */ + f_write(pb->fp, pb->buf, (UINT)i, &bw); + i = (bw == (UINT)i) ? 0 : -1; + } + pb->idx = i; + pb->nchr++; +} + + +static +int putc_flush ( /* Flush left characters in the buffer */ + putbuff* pb +) +{ + UINT nw; + + if ( pb->idx >= 0 /* Flush buffered characters to the file */ + && f_write(pb->fp, pb->buf, (UINT)pb->idx, &nw) == FR_OK + && (UINT)pb->idx == nw) return pb->nchr; + return EOF; +} + + +static +void putc_init ( /* Initialize write buffer */ + putbuff* pb, + FIL* fp +) +{ + pb->fp = fp; + pb->nchr = pb->idx = 0; +} + + + +int f_putc ( + TCHAR c, /* A character to be output */ + FIL* fp /* Pointer to the file object */ +) +{ + putbuff pb; + + + putc_init(&pb, fp); + putc_bfd(&pb, c); /* Put the character */ + return putc_flush(&pb); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Put a string to the file */ +/*-----------------------------------------------------------------------*/ + +int f_puts ( + const TCHAR* str, /* Pointer to the string to be output */ + FIL* fp /* Pointer to the file object */ +) +{ + putbuff pb; + + + putc_init(&pb, fp); + while (*str) putc_bfd(&pb, *str++); /* Put the string */ + return putc_flush(&pb); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Put a formatted string to the file */ +/*-----------------------------------------------------------------------*/ + +int f_printf ( + FIL* fp, /* Pointer to the file object */ + const TCHAR* fmt, /* Pointer to the format string */ + ... /* Optional arguments... */ +) +{ + va_list arp; + putbuff pb; + BYTE f, r; + UINT i, j, w; + DWORD v; + TCHAR c, d, str[32], *p; + + + putc_init(&pb, fp); + + va_start(arp, fmt); + + for (;;) { + c = *fmt++; + if (c == 0) break; /* End of string */ + if (c != '%') { /* Non escape character */ + putc_bfd(&pb, c); + continue; + } + w = f = 0; + c = *fmt++; + if (c == '0') { /* Flag: '0' padding */ + f = 1; c = *fmt++; + } else { + if (c == '-') { /* Flag: left justified */ + f = 2; c = *fmt++; + } + } + while (IsDigit(c)) { /* Precision */ + w = w * 10 + c - '0'; + c = *fmt++; + } + if (c == 'l' || c == 'L') { /* Prefix: Size is long int */ + f |= 4; c = *fmt++; + } + if (!c) break; + d = c; + if (IsLower(d)) d -= 0x20; + switch (d) { /* Type is... */ + case 'S' : /* String */ + p = va_arg(arp, TCHAR*); + for (j = 0; p[j]; j++) ; + if (!(f & 2)) { + while (j++ < w) putc_bfd(&pb, ' '); + } + while (*p) putc_bfd(&pb, *p++); + while (j++ < w) putc_bfd(&pb, ' '); + continue; + + case 'C' : /* Character */ + putc_bfd(&pb, (TCHAR)va_arg(arp, int)); continue; + + case 'B' : /* Binary */ + r = 2; break; + + case 'O' : /* Octal */ + r = 8; break; + + case 'D' : /* Signed decimal */ + case 'U' : /* Unsigned decimal */ + r = 10; break; + + case 'X' : /* Hexdecimal */ + r = 16; break; + + default: /* Unknown type (pass-through) */ + putc_bfd(&pb, c); continue; + } + + /* Get an argument and put it in numeral */ + v = (f & 4) ? (DWORD)va_arg(arp, long) : ((d == 'D') ? (DWORD)(long)va_arg(arp, int) : (DWORD)va_arg(arp, unsigned int)); + if (d == 'D' && (v & 0x80000000)) { + v = 0 - v; + f |= 8; + } + i = 0; + do { + d = (TCHAR)(v % r); v /= r; + if (d > 9) d += (c == 'x') ? 0x27 : 0x07; + str[i++] = d + '0'; + } while (v && i < sizeof str / sizeof str[0]); + if (f & 8) str[i++] = '-'; + j = i; d = (f & 1) ? '0' : ' '; + while (!(f & 2) && j++ < w) putc_bfd(&pb, d); + do { + putc_bfd(&pb, str[--i]); + } while (i); + while (j++ < w) putc_bfd(&pb, d); + } + + va_end(arp); + + return putc_flush(&pb); +} + +#endif /* !_FS_READONLY */ +#endif /* _USE_STRFUNC */ diff --git a/Middlewares/Third_Party/FatFs/src/ff.h b/Middlewares/Third_Party/FatFs/src/ff.h new file mode 100644 index 0000000..b14c3ce --- /dev/null +++ b/Middlewares/Third_Party/FatFs/src/ff.h @@ -0,0 +1,361 @@ +/*----------------------------------------------------------------------------/ +/ FatFs - Generic FAT file system module R0.12c / +/-----------------------------------------------------------------------------/ +/ +/ Copyright (C) 2017, ChaN, all right reserved. +/ +/ FatFs module is an open source software. Redistribution and use of FatFs in +/ source and binary forms, with or without modification, are permitted provided +/ that the following condition is met: + +/ 1. Redistributions of source code must retain the above copyright notice, +/ this condition and the following disclaimer. +/ +/ This software is provided by the copyright holder and contributors "AS IS" +/ and any warranties related to this software are DISCLAIMED. +/ The copyright owner or contributors be NOT LIABLE for any damages caused +/ by use of this software. +/----------------------------------------------------------------------------*/ + + +#ifndef _FATFS +#define _FATFS 68300 /* Revision ID */ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "integer.h" /* Basic integer types */ +#include "ffconf.h" /* FatFs configuration options */ + +#if _FATFS != _FFCONF +#error Wrong configuration file (ffconf.h). +#endif + + + +/* Definitions of volume management */ + +#if _MULTI_PARTITION /* Multiple partition configuration */ +typedef struct { + BYTE pd; /* Physical drive number */ + BYTE pt; /* Partition: 0:Auto detect, 1-4:Forced partition) */ +} PARTITION; +extern PARTITION VolToPart[]; /* Volume - Partition resolution table */ +#endif + + + +/* Type of path name strings on FatFs API */ + +#if _LFN_UNICODE /* Unicode (UTF-16) string */ +#if _USE_LFN == 0 +#error _LFN_UNICODE must be 0 at non-LFN cfg. +#endif +#ifndef _INC_TCHAR +typedef WCHAR TCHAR; +#define _T(x) L ## x +#define _TEXT(x) L ## x +#endif +#else /* ANSI/OEM string */ +#ifndef _INC_TCHAR +typedef char TCHAR; +#define _T(x) x +#define _TEXT(x) x +#endif +#endif + + + +/* Type of file size variables */ + +#if _FS_EXFAT +#if _USE_LFN == 0 +#error LFN must be enabled when enable exFAT +#endif +typedef QWORD FSIZE_t; +#else +typedef DWORD FSIZE_t; +#endif + + + +/* File system object structure (FATFS) */ + +typedef struct { + BYTE fs_type; /* File system type (0:N/A) */ + BYTE drv; /* Physical drive number */ + BYTE n_fats; /* Number of FATs (1 or 2) */ + BYTE wflag; /* win[] flag (b0:dirty) */ + BYTE fsi_flag; /* FSINFO flags (b7:disabled, b0:dirty) */ + WORD id; /* File system mount ID */ + WORD n_rootdir; /* Number of root directory entries (FAT12/16) */ + WORD csize; /* Cluster size [sectors] */ +#if _MAX_SS != _MIN_SS + WORD ssize; /* Sector size (512, 1024, 2048 or 4096) */ +#endif +#if _USE_LFN != 0 + WCHAR* lfnbuf; /* LFN working buffer */ +#endif +#if _FS_EXFAT + BYTE* dirbuf; /* Directory entry block scratchpad buffer */ +#endif +#if _FS_REENTRANT + _SYNC_t sobj; /* Identifier of sync object */ +#endif +#if !_FS_READONLY + DWORD last_clst; /* Last allocated cluster */ + DWORD free_clst; /* Number of free clusters */ +#endif +#if _FS_RPATH != 0 + DWORD cdir; /* Current directory start cluster (0:root) */ +#if _FS_EXFAT + DWORD cdc_scl; /* Containing directory start cluster (invalid when cdir is 0) */ + DWORD cdc_size; /* b31-b8:Size of containing directory, b7-b0: Chain status */ + DWORD cdc_ofs; /* Offset in the containing directory (invalid when cdir is 0) */ +#endif +#endif + DWORD n_fatent; /* Number of FAT entries (number of clusters + 2) */ + DWORD fsize; /* Size of an FAT [sectors] */ + DWORD volbase; /* Volume base sector */ + DWORD fatbase; /* FAT base sector */ + DWORD dirbase; /* Root directory base sector/cluster */ + DWORD database; /* Data base sector */ + DWORD winsect; /* Current sector appearing in the win[] */ + BYTE win[_MAX_SS]; /* Disk access window for Directory, FAT (and file data at tiny cfg) */ +} FATFS; + + + +/* Object ID and allocation information (_FDID) */ + +typedef struct { + FATFS* fs; /* Pointer to the owner file system object */ + WORD id; /* Owner file system mount ID */ + BYTE attr; /* Object attribute */ + BYTE stat; /* Object chain status (b1-0: =0:not contiguous, =2:contiguous (no data on FAT), =3:flagmented in this session, b2:sub-directory stretched) */ + DWORD sclust; /* Object start cluster (0:no cluster or root directory) */ + FSIZE_t objsize; /* Object size (valid when sclust != 0) */ +#if _FS_EXFAT + DWORD n_cont; /* Size of first fragment, clusters - 1 (valid when stat == 3) */ + DWORD n_frag; /* Size of last fragment needs to be written (valid when not zero) */ + DWORD c_scl; /* Containing directory start cluster (valid when sclust != 0) */ + DWORD c_size; /* b31-b8:Size of containing directory, b7-b0: Chain status (valid when c_scl != 0) */ + DWORD c_ofs; /* Offset in the containing directory (valid when sclust != 0 and non-directory object) */ +#endif +#if _FS_LOCK != 0 + UINT lockid; /* File lock ID origin from 1 (index of file semaphore table Files[]) */ +#endif +} _FDID; + + + +/* File object structure (FIL) */ + +typedef struct { + _FDID obj; /* Object identifier (must be the 1st member to detect invalid object pointer) */ + BYTE flag; /* File status flags */ + BYTE err; /* Abort flag (error code) */ + FSIZE_t fptr; /* File read/write pointer (Zeroed on file open) */ + DWORD clust; /* Current cluster of fpter (invalid when fptr is 0) */ + DWORD sect; /* Sector number appearing in buf[] (0:invalid) */ +#if !_FS_READONLY + DWORD dir_sect; /* Sector number containing the directory entry */ + BYTE* dir_ptr; /* Pointer to the directory entry in the win[] */ +#endif +#if _USE_FASTSEEK + DWORD* cltbl; /* Pointer to the cluster link map table (nulled on open, set by application) */ +#endif +#if !_FS_TINY + BYTE buf[_MAX_SS]; /* File private data read/write window */ +#endif +} FIL; + + + +/* Directory object structure (DIR) */ + +typedef struct { + _FDID obj; /* Object identifier */ + DWORD dptr; /* Current read/write offset */ + DWORD clust; /* Current cluster */ + DWORD sect; /* Current sector (0:Read operation has terminated) */ + BYTE* dir; /* Pointer to the directory item in the win[] */ + BYTE fn[12]; /* SFN (in/out) {body[8],ext[3],status[1]} */ +#if _USE_LFN != 0 + DWORD blk_ofs; /* Offset of current entry block being processed (0xFFFFFFFF:Invalid) */ +#endif +#if _USE_FIND + const TCHAR* pat; /* Pointer to the name matching pattern */ +#endif +} DIR; + + + +/* File information structure (FILINFO) */ + +typedef struct { + FSIZE_t fsize; /* File size */ + WORD fdate; /* Modified date */ + WORD ftime; /* Modified time */ + BYTE fattrib; /* File attribute */ +#if _USE_LFN != 0 + TCHAR altname[13]; /* Alternative file name */ + TCHAR fname[_MAX_LFN + 1]; /* Primary file name */ +#else + TCHAR fname[13]; /* File name */ +#endif +} FILINFO; + + + +/* File function return code (FRESULT) */ + +typedef enum { + FR_OK = 0, /* (0) Succeeded */ + FR_DISK_ERR, /* (1) A hard error occurred in the low level disk I/O layer */ + FR_INT_ERR, /* (2) Assertion failed */ + FR_NOT_READY, /* (3) The physical drive cannot work */ + FR_NO_FILE, /* (4) Could not find the file */ + FR_NO_PATH, /* (5) Could not find the path */ + FR_INVALID_NAME, /* (6) The path name format is invalid */ + FR_DENIED, /* (7) Access denied due to prohibited access or directory full */ + FR_EXIST, /* (8) Access denied due to prohibited access */ + FR_INVALID_OBJECT, /* (9) The file/directory object is invalid */ + FR_WRITE_PROTECTED, /* (10) The physical drive is write protected */ + FR_INVALID_DRIVE, /* (11) The logical drive number is invalid */ + FR_NOT_ENABLED, /* (12) The volume has no work area */ + FR_NO_FILESYSTEM, /* (13) There is no valid FAT volume */ + FR_MKFS_ABORTED, /* (14) The f_mkfs() aborted due to any problem */ + FR_TIMEOUT, /* (15) Could not get a grant to access the volume within defined period */ + FR_LOCKED, /* (16) The operation is rejected according to the file sharing policy */ + FR_NOT_ENOUGH_CORE, /* (17) LFN working buffer could not be allocated */ + FR_TOO_MANY_OPEN_FILES, /* (18) Number of open files > _FS_LOCK */ + FR_INVALID_PARAMETER /* (19) Given parameter is invalid */ +} FRESULT; + + + +/*--------------------------------------------------------------*/ +/* FatFs module application interface */ + +FRESULT f_open (FIL* fp, const TCHAR* path, BYTE mode); /* Open or create a file */ +FRESULT f_close (FIL* fp); /* Close an open file object */ +FRESULT f_read (FIL* fp, void* buff, UINT btr, UINT* br); /* Read data from the file */ +FRESULT f_write (FIL* fp, const void* buff, UINT btw, UINT* bw); /* Write data to the file */ +FRESULT f_lseek (FIL* fp, FSIZE_t ofs); /* Move file pointer of the file object */ +FRESULT f_truncate (FIL* fp); /* Truncate the file */ +FRESULT f_sync (FIL* fp); /* Flush cached data of the writing file */ +FRESULT f_opendir (DIR* dp, const TCHAR* path); /* Open a directory */ +FRESULT f_closedir (DIR* dp); /* Close an open directory */ +FRESULT f_readdir (DIR* dp, FILINFO* fno); /* Read a directory item */ +FRESULT f_findfirst (DIR* dp, FILINFO* fno, const TCHAR* path, const TCHAR* pattern); /* Find first file */ +FRESULT f_findnext (DIR* dp, FILINFO* fno); /* Find next file */ +FRESULT f_mkdir (const TCHAR* path); /* Create a sub directory */ +FRESULT f_unlink (const TCHAR* path); /* Delete an existing file or directory */ +FRESULT f_rename (const TCHAR* path_old, const TCHAR* path_new); /* Rename/Move a file or directory */ +FRESULT f_stat (const TCHAR* path, FILINFO* fno); /* Get file status */ +FRESULT f_chmod (const TCHAR* path, BYTE attr, BYTE mask); /* Change attribute of a file/dir */ +FRESULT f_utime (const TCHAR* path, const FILINFO* fno); /* Change timestamp of a file/dir */ +FRESULT f_chdir (const TCHAR* path); /* Change current directory */ +FRESULT f_chdrive (const TCHAR* path); /* Change current drive */ +FRESULT f_getcwd (TCHAR* buff, UINT len); /* Get current directory */ +FRESULT f_getfree (const TCHAR* path, DWORD* nclst, FATFS** fatfs); /* Get number of free clusters on the drive */ +FRESULT f_getlabel (const TCHAR* path, TCHAR* label, DWORD* vsn); /* Get volume label */ +FRESULT f_setlabel (const TCHAR* label); /* Set volume label */ +FRESULT f_forward (FIL* fp, UINT(*func)(const BYTE*,UINT), UINT btf, UINT* bf); /* Forward data to the stream */ +FRESULT f_expand (FIL* fp, FSIZE_t szf, BYTE opt); /* Allocate a contiguous block to the file */ +FRESULT f_mount (FATFS* fs, const TCHAR* path, BYTE opt); /* Mount/Unmount a logical drive */ +FRESULT f_mkfs (const TCHAR* path, BYTE opt, DWORD au, void* work, UINT len); /* Create a FAT volume */ +FRESULT f_fdisk (BYTE pdrv, const DWORD* szt, void* work); /* Divide a physical drive into some partitions */ +int f_putc (TCHAR c, FIL* fp); /* Put a character to the file */ +int f_puts (const TCHAR* str, FIL* cp); /* Put a string to the file */ +int f_printf (FIL* fp, const TCHAR* str, ...); /* Put a formatted string to the file */ +TCHAR* f_gets (TCHAR* buff, int len, FIL* fp); /* Get a string from the file */ + +#define f_eof(fp) ((int)((fp)->fptr == (fp)->obj.objsize)) +#define f_error(fp) ((fp)->err) +#define f_tell(fp) ((fp)->fptr) +#define f_size(fp) ((fp)->obj.objsize) +#define f_rewind(fp) f_lseek((fp), 0) +#define f_rewinddir(dp) f_readdir((dp), 0) +#define f_rmdir(path) f_unlink(path) + +#ifndef EOF +#define EOF (-1) +#endif + + + + +/*--------------------------------------------------------------*/ +/* Additional user defined functions */ + +/* RTC function */ +#if !_FS_READONLY && !_FS_NORTC +DWORD get_fattime (void); +#endif + +/* Unicode support functions */ +#if _USE_LFN != 0 /* Unicode - OEM code conversion */ +WCHAR ff_convert (WCHAR chr, UINT dir); /* OEM-Unicode bidirectional conversion */ +WCHAR ff_wtoupper (WCHAR chr); /* Unicode upper-case conversion */ +#if _USE_LFN == 3 /* Memory functions */ +void* ff_memalloc (UINT msize); /* Allocate memory block */ +void ff_memfree (void* mblock); /* Free memory block */ +#endif +#endif + +/* Sync functions */ +#if _FS_REENTRANT +int ff_cre_syncobj (BYTE vol, _SYNC_t* sobj); /* Create a sync object */ +int ff_req_grant (_SYNC_t sobj); /* Lock sync object */ +void ff_rel_grant (_SYNC_t sobj); /* Unlock sync object */ +int ff_del_syncobj (_SYNC_t sobj); /* Delete a sync object */ +#endif + + + + +/*--------------------------------------------------------------*/ +/* Flags and offset address */ + + +/* File access mode and open method flags (3rd argument of f_open) */ +#define FA_READ 0x01 +#define FA_WRITE 0x02 +#define FA_OPEN_EXISTING 0x00 +#define FA_CREATE_NEW 0x04 +#define FA_CREATE_ALWAYS 0x08 +#define FA_OPEN_ALWAYS 0x10 +#define FA_OPEN_APPEND 0x30 + +/* Fast seek controls (2nd argument of f_lseek) */ +#define CREATE_LINKMAP ((FSIZE_t)0 - 1) + +/* Format options (2nd argument of f_mkfs) */ +#define FM_FAT 0x01 +#define FM_FAT32 0x02 +#define FM_EXFAT 0x04 +#define FM_ANY 0x07 +#define FM_SFD 0x08 + +/* Filesystem type (FATFS.fs_type) */ +#define FS_FAT12 1 +#define FS_FAT16 2 +#define FS_FAT32 3 +#define FS_EXFAT 4 + +/* File attribute bits for directory entry (FILINFO.fattrib) */ +#define AM_RDO 0x01 /* Read only */ +#define AM_HID 0x02 /* Hidden */ +#define AM_SYS 0x04 /* System */ +#define AM_DIR 0x10 /* Directory */ +#define AM_ARC 0x20 /* Archive */ + + +#ifdef __cplusplus +} +#endif + +#endif /* _FATFS */ diff --git a/Middlewares/Third_Party/FatFs/src/ff_gen_drv.c b/Middlewares/Third_Party/FatFs/src/ff_gen_drv.c new file mode 100644 index 0000000..ccd595b --- /dev/null +++ b/Middlewares/Third_Party/FatFs/src/ff_gen_drv.c @@ -0,0 +1,122 @@ +/** + ****************************************************************************** + * @file ff_gen_drv.c + * @author MCD Application Team + * @brief FatFs generic low level driver. + ***************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** +**/ +/* Includes ------------------------------------------------------------------*/ +#include "ff_gen_drv.h" + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +Disk_drvTypeDef disk = {{0},{0},{0},0}; + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** + * @brief Links a compatible diskio driver/lun id and increments the number of active + * linked drivers. + * @note The number of linked drivers (volumes) is up to 10 due to FatFs limits. + * @param drv: pointer to the disk IO Driver structure + * @param path: pointer to the logical drive path + * @param lun : only used for USB Key Disk to add multi-lun management + else the parameter must be equal to 0 + * @retval Returns 0 in case of success, otherwise 1. + */ +uint8_t FATFS_LinkDriverEx(const Diskio_drvTypeDef *drv, char *path, uint8_t lun) +{ + uint8_t ret = 1; + uint8_t DiskNum = 0; + + if(disk.nbr < _VOLUMES) + { + disk.is_initialized[disk.nbr] = 0; + disk.drv[disk.nbr] = drv; + disk.lun[disk.nbr] = lun; + DiskNum = disk.nbr++; + path[0] = DiskNum + '0'; + path[1] = ':'; + path[2] = '/'; + path[3] = 0; + ret = 0; + } + + return ret; +} + +/** + * @brief Links a compatible diskio driver and increments the number of active + * linked drivers. + * @note The number of linked drivers (volumes) is up to 10 due to FatFs limits + * @param drv: pointer to the disk IO Driver structure + * @param path: pointer to the logical drive path + * @retval Returns 0 in case of success, otherwise 1. + */ +uint8_t FATFS_LinkDriver(const Diskio_drvTypeDef *drv, char *path) +{ + return FATFS_LinkDriverEx(drv, path, 0); +} + +/** + * @brief Unlinks a diskio driver and decrements the number of active linked + * drivers. + * @param path: pointer to the logical drive path + * @param lun : not used + * @retval Returns 0 in case of success, otherwise 1. + */ +uint8_t FATFS_UnLinkDriverEx(char *path, uint8_t lun) +{ + uint8_t DiskNum = 0; + uint8_t ret = 1; + + if(disk.nbr >= 1) + { + DiskNum = path[0] - '0'; + if(disk.drv[DiskNum] != 0) + { + disk.drv[DiskNum] = 0; + disk.lun[DiskNum] = 0; + disk.nbr--; + ret = 0; + } + } + + return ret; +} + +/** + * @brief Unlinks a diskio driver and decrements the number of active linked + * drivers. + * @param path: pointer to the logical drive path + * @retval Returns 0 in case of success, otherwise 1. + */ +uint8_t FATFS_UnLinkDriver(char *path) +{ + return FATFS_UnLinkDriverEx(path, 0); +} + +/** + * @brief Gets number of linked drivers to the FatFs module. + * @param None + * @retval Number of attached drivers. + */ +uint8_t FATFS_GetAttachedDriversNbr(void) +{ + return disk.nbr; +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Middlewares/Third_Party/FatFs/src/ff_gen_drv.h b/Middlewares/Third_Party/FatFs/src/ff_gen_drv.h new file mode 100644 index 0000000..5172e0d --- /dev/null +++ b/Middlewares/Third_Party/FatFs/src/ff_gen_drv.h @@ -0,0 +1,80 @@ +/** + ****************************************************************************** + * @file ff_gen_drv.h + * @author MCD Application Team + * @brief Header for ff_gen_drv.c module. + ***************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** +**/ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __FF_GEN_DRV_H +#define __FF_GEN_DRV_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "diskio.h" +#include "ff.h" +#include "stdint.h" + + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief Disk IO Driver structure definition + */ +typedef struct +{ + DSTATUS (*disk_initialize) (BYTE); /*!< Initialize Disk Drive */ + DSTATUS (*disk_status) (BYTE); /*!< Get Disk Status */ + DRESULT (*disk_read) (BYTE, BYTE*, DWORD, UINT); /*!< Read Sector(s) */ +#if _USE_WRITE == 1 + DRESULT (*disk_write) (BYTE, const BYTE*, DWORD, UINT); /*!< Write Sector(s) when _USE_WRITE = 0 */ +#endif /* _USE_WRITE == 1 */ +#if _USE_IOCTL == 1 + DRESULT (*disk_ioctl) (BYTE, BYTE, void*); /*!< I/O control operation when _USE_IOCTL = 1 */ +#endif /* _USE_IOCTL == 1 */ + +}Diskio_drvTypeDef; + +/** + * @brief Global Disk IO Drivers structure definition + */ +typedef struct +{ + uint8_t is_initialized[_VOLUMES]; + const Diskio_drvTypeDef *drv[_VOLUMES]; + uint8_t lun[_VOLUMES]; + volatile uint8_t nbr; + +}Disk_drvTypeDef; + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ +uint8_t FATFS_LinkDriver(const Diskio_drvTypeDef *drv, char *path); +uint8_t FATFS_UnLinkDriver(char *path); +uint8_t FATFS_LinkDriverEx(const Diskio_drvTypeDef *drv, char *path, BYTE lun); +uint8_t FATFS_UnLinkDriverEx(char *path, BYTE lun); +uint8_t FATFS_GetAttachedDriversNbr(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __FF_GEN_DRV_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Middlewares/Third_Party/FatFs/src/integer.h b/Middlewares/Third_Party/FatFs/src/integer.h new file mode 100644 index 0000000..9ce7865 --- /dev/null +++ b/Middlewares/Third_Party/FatFs/src/integer.h @@ -0,0 +1,38 @@ +/*-------------------------------------------*/ +/* Integer type definitions for FatFs module */ +/*-------------------------------------------*/ + +#ifndef _FF_INTEGER +#define _FF_INTEGER + +#ifdef _WIN32 /* FatFs development platform */ + +#include +#include +typedef unsigned __int64 QWORD; + + +#else /* Embedded platform */ + +/* These types MUST be 16-bit or 32-bit */ +typedef int INT; +typedef unsigned int UINT; + +/* This type MUST be 8-bit */ +typedef unsigned char BYTE; + +/* These types MUST be 16-bit */ +typedef short SHORT; +typedef unsigned short WORD; +typedef unsigned short WCHAR; + +/* These types MUST be 32-bit */ +typedef long LONG; +typedef unsigned long DWORD; + +/* This type MUST be 64-bit (Remove this for ANSI C (C89) compatibility) */ +typedef unsigned long long QWORD; + +#endif + +#endif diff --git a/Middlewares/Third_Party/FatFs/src/option/syscall.c b/Middlewares/Third_Party/FatFs/src/option/syscall.c new file mode 100644 index 0000000..cd6370d --- /dev/null +++ b/Middlewares/Third_Party/FatFs/src/option/syscall.c @@ -0,0 +1,177 @@ +/*------------------------------------------------------------------------*/ +/* Sample code of OS dependent controls for FatFs */ +/* (C)ChaN, 2014 */ +/* Portions COPYRIGHT 2017 STMicroelectronics */ +/* Portions Copyright (C) 2014, ChaN, all right reserved */ +/*------------------------------------------------------------------------*/ + +/** + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** +**/ + + + +#include "../ff.h" + + +#if _FS_REENTRANT +/*------------------------------------------------------------------------*/ +/* Create a Synchronization Object */ +/*------------------------------------------------------------------------*/ +/* This function is called in f_mount() function to create a new +/ synchronization object, such as semaphore and mutex. When a 0 is returned, +/ the f_mount() function fails with FR_INT_ERR. +*/ + +int ff_cre_syncobj ( /* 1:Function succeeded, 0:Could not create the sync object */ + BYTE vol, /* Corresponding volume (logical drive number) */ + _SYNC_t *sobj /* Pointer to return the created sync object */ +) +{ + + int ret; +#if _USE_MUTEX + +#if (osCMSIS < 0x20000U) + osMutexDef(MTX); + *sobj = osMutexCreate(osMutex(MTX)); +#else + *sobj = osMutexNew(NULL); +#endif + +#else + +#if (osCMSIS < 0x20000U) + osSemaphoreDef(SEM); + *sobj = osSemaphoreCreate(osSemaphore(SEM), 1); +#else + *sobj = osSemaphoreNew(1, 1, NULL); +#endif + +#endif + ret = (*sobj != NULL); + + return ret; +} + + + +/*------------------------------------------------------------------------*/ +/* Delete a Synchronization Object */ +/*------------------------------------------------------------------------*/ +/* This function is called in f_mount() function to delete a synchronization +/ object that created with ff_cre_syncobj() function. When a 0 is returned, +/ the f_mount() function fails with FR_INT_ERR. +*/ + +int ff_del_syncobj ( /* 1:Function succeeded, 0:Could not delete due to any error */ + _SYNC_t sobj /* Sync object tied to the logical drive to be deleted */ +) +{ +#if _USE_MUTEX + osMutexDelete (sobj); +#else + osSemaphoreDelete (sobj); +#endif + return 1; +} + + + +/*------------------------------------------------------------------------*/ +/* Request Grant to Access the Volume */ +/*------------------------------------------------------------------------*/ +/* This function is called on entering file functions to lock the volume. +/ When a 0 is returned, the file function fails with FR_TIMEOUT. +*/ + +int ff_req_grant ( /* 1:Got a grant to access the volume, 0:Could not get a grant */ + _SYNC_t sobj /* Sync object to wait */ +) +{ + int ret = 0; +#if (osCMSIS < 0x20000U) + +#if _USE_MUTEX + if(osMutexWait(sobj, _FS_TIMEOUT) == osOK) +#else + if(osSemaphoreWait(sobj, _FS_TIMEOUT) == osOK) +#endif + +#else + +#if _USE_MUTEX + if(osMutexAcquire(sobj, _FS_TIMEOUT) == osOK) +#else + if(osSemaphoreAcquire(sobj, _FS_TIMEOUT) == osOK) +#endif + +#endif + { + ret = 1; + } + + return ret; +} + + + +/*------------------------------------------------------------------------*/ +/* Release Grant to Access the Volume */ +/*------------------------------------------------------------------------*/ +/* This function is called on leaving file functions to unlock the volume. +*/ + +void ff_rel_grant ( + _SYNC_t sobj /* Sync object to be signaled */ +) +{ +#if _USE_MUTEX + osMutexRelease(sobj); +#else + osSemaphoreRelease(sobj); +#endif +} + +#endif + + + + +#if _USE_LFN == 3 /* LFN with a working buffer on the heap */ +/*------------------------------------------------------------------------*/ +/* Allocate a memory block */ +/*------------------------------------------------------------------------*/ +/* If a NULL is returned, the file function fails with FR_NOT_ENOUGH_CORE. +*/ + +void* ff_memalloc ( /* Returns pointer to the allocated memory block */ + UINT msize /* Number of bytes to allocate */ +) +{ + return ff_malloc(msize); /* Allocate a new memory block with POSIX API */ +} + + +/*------------------------------------------------------------------------*/ +/* Free a memory block */ +/*------------------------------------------------------------------------*/ + +void ff_memfree ( + void* mblock /* Pointer to the memory block to free */ +) +{ + ff_free(mblock); /* Discard the memory block with POSIX API */ +} + +#endif diff --git a/STM32G0B1KBUX_FLASH.ld b/STM32G0B1KBUX_FLASH.ld index 5004b86..4e23274 100644 --- a/STM32G0B1KBUX_FLASH.ld +++ b/STM32G0B1KBUX_FLASH.ld @@ -1,57 +1,74 @@ /* ****************************************************************************** ** -** @file : LinkerScript.ld + +** File : LinkerScript.ld ** -** @author : Auto-generated by STM32CubeIDE +** Author : STM32CubeMX ** -** @brief : Linker script for STM32G0B1KBUx Device from STM32G0 series -** 128KBytes FLASH -** 144KBytes RAM +** Abstract : Linker script for STM32G0B1KBUx series +** 128Kbytes FLASH and 144Kbytes RAM ** ** Set heap size, stack size and stack location according ** to application requirements. ** -** Set memory bank area and size if external memory is used +** Set memory bank area and size if external memory is used. ** ** Target : STMicroelectronics STM32 ** -** Distribution: The file is distributed as is, without any warranty +** Distribution: The file is distributed “as is,” without any warranty ** of any kind. ** -****************************************************************************** +***************************************************************************** ** @attention ** -** Copyright (c) 2024 STMicroelectronics. -** All rights reserved. +**

© COPYRIGHT(c) 2019 STMicroelectronics

** -** This software is licensed under terms that can be found in the LICENSE file -** in the root directory of this software component. -** If no LICENSE file comes with this software, it is provided AS-IS. +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** 1. Redistributions of source code must retain the above copyright notice, +** this list of conditions and the following disclaimer. +** 2. Redistributions in binary form must reproduce the above copyright notice, +** this list of conditions and the following disclaimer in the documentation +** and/or other materials provided with the distribution. +** 3. Neither the name of STMicroelectronics nor the names of its contributors +** may be used to endorse or promote products derived from this software +** without specific prior written permission. ** -****************************************************************************** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +***************************************************************************** */ /* Entry Point */ ENTRY(Reset_Handler) /* Highest address of the user mode stack */ -_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ - -_Min_Heap_Size = 0x800; /* required amount of heap */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x800; /* required amount of heap */ _Min_Stack_Size = 0x400; /* required amount of stack */ -/* Memories definition */ +/* Specify the memory areas */ MEMORY { - RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 144K - FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 128K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 144K +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 128K } -/* Sections */ +/* Define output sections */ SECTIONS { - /* The startup code into "FLASH" Rom type memory */ + /* The startup code goes first into FLASH */ .isr_vector : { . = ALIGN(4); @@ -59,7 +76,7 @@ SECTIONS . = ALIGN(4); } >FLASH - /* The program code and other data into "FLASH" Rom type memory */ + /* The program code and other data goes into FLASH */ .text : { . = ALIGN(4); @@ -76,7 +93,7 @@ SECTIONS _etext = .; /* define a global symbols at end of code */ } >FLASH - /* Constant data into "FLASH" Rom type memory */ + /* Constant data goes into FLASH */ .rodata : { . = ALIGN(4); @@ -85,74 +102,55 @@ SECTIONS . = ALIGN(4); } >FLASH - .ARM.extab (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ - { - . = ALIGN(4); - *(.ARM.extab* .gnu.linkonce.armextab.*) - . = ALIGN(4); - } >FLASH - - .ARM (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ - { - . = ALIGN(4); + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { __exidx_start = .; *(.ARM.exidx*) __exidx_end = .; - . = ALIGN(4); } >FLASH - .preinit_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + .preinit_array : { - . = ALIGN(4); PROVIDE_HIDDEN (__preinit_array_start = .); KEEP (*(.preinit_array*)) PROVIDE_HIDDEN (__preinit_array_end = .); - . = ALIGN(4); } >FLASH - - .init_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + .init_array : { - . = ALIGN(4); PROVIDE_HIDDEN (__init_array_start = .); KEEP (*(SORT(.init_array.*))) KEEP (*(.init_array*)) PROVIDE_HIDDEN (__init_array_end = .); - . = ALIGN(4); } >FLASH - - .fini_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + .fini_array : { - . = ALIGN(4); PROVIDE_HIDDEN (__fini_array_start = .); KEEP (*(SORT(.fini_array.*))) KEEP (*(.fini_array*)) PROVIDE_HIDDEN (__fini_array_end = .); - . = ALIGN(4); } >FLASH - /* Used by the startup to initialize data */ + /* used by the startup to initialize data */ _sidata = LOADADDR(.data); - /* Initialized data sections into "RAM" Ram type memory */ - .data : + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ *(.data) /* .data sections */ *(.data*) /* .data* sections */ - *(.RamFunc) /* .RamFunc sections */ - *(.RamFunc*) /* .RamFunc* sections */ . = ALIGN(4); _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - /* Uninitialized data section into "RAM" Ram type memory */ + + /* Uninitialized data section */ . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss section */ + /* This is used by the startup in order to initialize the .bss secion */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) @@ -164,7 +162,7 @@ SECTIONS __bss_end__ = _ebss; } >RAM - /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + /* User_heap_stack section, used to check that there is enough RAM left */ ._user_heap_stack : { . = ALIGN(8); @@ -175,7 +173,9 @@ SECTIONS . = ALIGN(8); } >RAM - /* Remove information from the compiler libraries */ + + + /* Remove information from the standard libraries */ /DISCARD/ : { libc.a ( * ) @@ -185,3 +185,5 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } + + diff --git a/USB_Device/App/usbd_cdc_if.c b/USB_Device/App/usbd_cdc_if.c index bc7feb7..c154da1 100644 --- a/USB_Device/App/usbd_cdc_if.c +++ b/USB_Device/App/usbd_cdc_if.c @@ -220,23 +220,11 @@ static int8_t CDC_Control_FS(uint8_t cmd, uint8_t* pbuf, uint16_t length) /* 6 | bDataBits | 1 | Number Data bits (5, 6, 7, 8 or 16). */ /*******************************************************************************/ case CDC_SET_LINE_CODING: - // buf[0] = pbuf[0]; - // buf[1] = pbuf[1]; - // buf[2] = pbuf[2]; - // buf[3] = pbuf[3]; - // buf[4] = pbuf[4]; - // buf[5] = pbuf[5]; - // buf[6] = pbuf[6]; + break; case CDC_GET_LINE_CODING: - // pbuf[0] = buf[0]; - // pbuf[1] = buf[1]; - // pbuf[2] = buf[2]; - // pbuf[3] = buf[3]; - // pbuf[4] = buf[4]; - // pbuf[5] = buf[5]; - // pbuf[6] = buf[6]; + break; case CDC_SET_CONTROL_LINE_STATE: diff --git a/cmake/gcc-arm-none-eabi.cmake b/cmake/gcc-arm-none-eabi.cmake new file mode 100644 index 0000000..8b7ffcd --- /dev/null +++ b/cmake/gcc-arm-none-eabi.cmake @@ -0,0 +1,49 @@ +set(CMAKE_SYSTEM_NAME Generic) +set(CMAKE_SYSTEM_PROCESSOR arm) + +set(CMAKE_C_COMPILER_FORCED TRUE) +set(CMAKE_CXX_COMPILER_FORCED TRUE) +set(CMAKE_C_COMPILER_ID GNU) +set(CMAKE_CXX_COMPILER_ID GNU) + +# Some default GCC settings +# arm-none-eabi- must be part of path environment +set(TOOLCHAIN_PREFIX arm-none-eabi-) + +set(CMAKE_C_COMPILER ${TOOLCHAIN_PREFIX}gcc) +set(CMAKE_ASM_COMPILER ${CMAKE_C_COMPILER}) +set(CMAKE_CXX_COMPILER ${TOOLCHAIN_PREFIX}g++) +set(CMAKE_LINKER ${TOOLCHAIN_PREFIX}g++) +set(CMAKE_OBJCOPY ${TOOLCHAIN_PREFIX}objcopy) +set(CMAKE_SIZE ${TOOLCHAIN_PREFIX}size) + +set(CMAKE_EXECUTABLE_SUFFIX_ASM ".elf") +set(CMAKE_EXECUTABLE_SUFFIX_C ".elf") +set(CMAKE_EXECUTABLE_SUFFIX_CXX ".elf") + +set(CMAKE_TRY_COMPILE_TARGET_TYPE STATIC_LIBRARY) + +# MCU specific flags +set(TARGET_FLAGS "-mcpu=cortex-m0plus ") + +set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${TARGET_FLAGS}") +set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wall -Wextra -Wpedantic -fdata-sections -ffunction-sections") +if(CMAKE_BUILD_TYPE MATCHES Debug) + set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -O0 -g3") +endif() +if(CMAKE_BUILD_TYPE MATCHES Release) + set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Os -g0") +endif() + +set(CMAKE_ASM_FLAGS "${CMAKE_C_FLAGS} -x assembler-with-cpp -MMD -MP") +set(CMAKE_CXX_FLAGS "${CMAKE_C_FLAGS} -fno-rtti -fno-exceptions -fno-threadsafe-statics") + +set(CMAKE_C_LINK_FLAGS "${TARGET_FLAGS}") +set(CMAKE_C_LINK_FLAGS "${CMAKE_C_LINK_FLAGS} -T \"${CMAKE_SOURCE_DIR}/STM32G0B1KBUx_FLASH.ld\"") +set(CMAKE_C_LINK_FLAGS "${CMAKE_C_LINK_FLAGS} --specs=nano.specs") +set(CMAKE_C_LINK_FLAGS "${CMAKE_C_LINK_FLAGS} -Wl,-Map=${CMAKE_PROJECT_NAME}.map -Wl,--gc-sections") +set(CMAKE_C_LINK_FLAGS "${CMAKE_C_LINK_FLAGS} -Wl,--start-group -lc -lm -Wl,--end-group") +set(CMAKE_C_LINK_FLAGS "${CMAKE_C_LINK_FLAGS} -Wl,--print-memory-usage") +set(CMAKE_C_LINK_FLAGS "${CMAKE_C_LINK_FLAGS} -u _printf_float") + +set(CMAKE_CXX_LINK_FLAGS "${CMAKE_C_LINK_FLAGS} -Wl,--start-group -lstdc++ -lsupc++ -Wl,--end-group") \ No newline at end of file diff --git a/cmake/stm32cubemx/CMakeLists.txt b/cmake/stm32cubemx/CMakeLists.txt new file mode 100644 index 0000000..005170b --- /dev/null +++ b/cmake/stm32cubemx/CMakeLists.txt @@ -0,0 +1,109 @@ +cmake_minimum_required(VERSION 3.22) + +project(stm32cubemx) +add_library(stm32cubemx INTERFACE) + +# Enable CMake support for ASM and C languages +enable_language(C ASM) + +target_compile_definitions(stm32cubemx INTERFACE + USE_HAL_DRIVER + STM32G0B1xx + $<$:DEBUG> +) + +target_include_directories(stm32cubemx INTERFACE + ../../Core/Inc + ../../FATFS/Target + ../../FATFS/App + ../../USB_Device/App + ../../USB_Device/Target + ../../Drivers/STM32G0xx_HAL_Driver/Inc + ../../Drivers/STM32G0xx_HAL_Driver/Inc/Legacy + ../../Middlewares/Third_Party/FatFs/src + ../../Middlewares/ST/STM32_USB_Device_Library/Core/Inc + ../../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc + ../../Drivers/CMSIS/Device/ST/STM32G0xx/Include + ../../Drivers/CMSIS/Include +) + +target_sources(stm32cubemx INTERFACE + ../../Core/Src/main.c + ../../Core/Src/gpio.c + ../../Core/Src/adc.c + ../../Core/Src/crc.c + ../../Core/Src/i2c.c + ../../Core/Src/rtc.c + ../../Core/Src/spi.c + ../../Core/Src/usart.c + ../../Core/Src/stm32g0xx_it.c + ../../Core/Src/stm32g0xx_hal_msp.c + ../../USB_Device/Target/usbd_conf.c + ../../USB_Device/App/usb_device.c + ../../USB_Device/App/usbd_desc.c + ../../USB_Device/App/usbd_cdc_if.c + ../../FATFS/Target/user_diskio.c + ../../FATFS/App/app_fatfs.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pcd_ex.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_usb.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_rcc.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash_ex.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma_ex.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_dma.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_exti.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc_ex.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_adc.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_crc.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_crc_ex.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_i2c_ex.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rtc.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rtc_ex.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi_ex.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim_ex.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart.c + ../../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart_ex.c + ../../Core/Src/system_stm32g0xx.c + ../../Middlewares/Third_Party/FatFs/src/diskio.c + ../../Middlewares/Third_Party/FatFs/src/ff.c + ../../Middlewares/Third_Party/FatFs/src/ff_gen_drv.c + ../../Middlewares/Third_Party/FatFs/src/option/syscall.c + ../../Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c + ../../Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c + ../../Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c + ../../Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c + ../../Core/Src/sysmem.c + ../../Core/Src/syscalls.c + ../../startup_stm32g0b1xx.s + ../../Core/Src/cir_buf.c + ../../Core/Src/data_table.c + ../../Core/Src/IS66.c + ../../Core/Src/sht_40.c + ../../Core/Src/testmode.c +) + +target_link_directories(stm32cubemx INTERFACE +) + +target_link_libraries(stm32cubemx INTERFACE +) + +# Validate that STM32CubeMX code is compatible with C standard +if(CMAKE_C_STANDARD LESS 11) + message(ERROR "Generated code requires C11 or higher") +endif() + + diff --git a/startup_stm32g0b1xx.s b/startup_stm32g0b1xx.s new file mode 100644 index 0000000..88a1208 --- /dev/null +++ b/startup_stm32g0b1xx.s @@ -0,0 +1,296 @@ +/** + ****************************************************************************** + * @file startup_stm32g0b1xx.s + * @author MCD Application Team + * @brief STM32G0b1xx devices vector table GCC toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0+ processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018-2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +.syntax unified +.cpu cortex-m0plus +.fpu softvfp +.thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/* Call the clock system initialization function.*/ + bl SystemInit + +/* Copy the data segment initializers from flash to SRAM */ + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 + +LoopCopyDataInit: + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + +/* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + +FillZerobss: + str r3, [r2] + adds r2, r2, #4 + +LoopFillZerobss: + cmp r2, r4 + bcc FillZerobss + +/* Call static constructors */ + bl __libc_init_array +/* Call the application s entry point.*/ + bl main + +LoopForever: + b LoopForever + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler + +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler /* Window WatchDog */ + .word PVD_VDDIO2_IRQHandler /* PVD through EXTI Line detect */ + .word RTC_TAMP_IRQHandler /* RTC through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_CRS_IRQHandler /* RCC & CRS */ + .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ + .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ + .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ + .word USB_UCPD1_2_IRQHandler /* USB, UCPD1, UCPD2 */ + .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ + .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */ + .word DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQHandler /* DMA1 Ch4 to Ch7, DMA2 Ch1 to Ch5, DMAMUX1 overrun */ + .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */ + .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word TIM2_IRQHandler /* TIM2 */ + .word TIM3_TIM4_IRQHandler /* TIM3, TIM4 */ + .word TIM6_DAC_LPTIM1_IRQHandler /* TIM6, DAC and LPTIM1 */ + .word TIM7_LPTIM2_IRQHandler /* TIM7 and LPTIM2 */ + .word TIM14_IRQHandler /* TIM14 */ + .word TIM15_IRQHandler /* TIM15 */ + .word TIM16_FDCAN_IT0_IRQHandler /* TIM16 & FDCAN1_IT0 & FDCAN2_IT0 */ + .word TIM17_FDCAN_IT1_IRQHandler /* TIM17 & FDCAN1_IT1 & FDCAN2_IT1 */ + .word I2C1_IRQHandler /* I2C1 */ + .word I2C2_3_IRQHandler /* I2C2, I2C3 */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_3_IRQHandler /* SPI2, SPI3 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_LPUART2_IRQHandler /* USART2 & LPUART2 */ + .word USART3_4_5_6_LPUART1_IRQHandler /* USART3, USART4, USART5, USART6, LPUART1 */ + .word CEC_IRQHandler /* CEC */ + + .size g_pfnVectors, .-g_pfnVectors + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_VDDIO2_IRQHandler + .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler + + .weak RTC_TAMP_IRQHandler + .thumb_set RTC_TAMP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_CRS_IRQHandler + .thumb_set RCC_CRS_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak USB_UCPD1_2_IRQHandler + .thumb_set USB_UCPD1_2_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_3_IRQHandler + .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler + + .weak DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQHandler + .thumb_set DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQHandler,Default_Handler + + .weak ADC1_COMP_IRQHandler + .thumb_set ADC1_COMP_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_TIM4_IRQHandler + .thumb_set TIM3_TIM4_IRQHandler,Default_Handler + + .weak TIM6_DAC_LPTIM1_IRQHandler + .thumb_set TIM6_DAC_LPTIM1_IRQHandler,Default_Handler + + .weak TIM7_LPTIM2_IRQHandler + .thumb_set TIM7_LPTIM2_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM15_IRQHandler + .thumb_set TIM15_IRQHandler,Default_Handler + + .weak TIM16_FDCAN_IT0_IRQHandler + .thumb_set TIM16_FDCAN_IT0_IRQHandler,Default_Handler + + .weak TIM17_FDCAN_IT1_IRQHandler + .thumb_set TIM17_FDCAN_IT1_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak I2C2_3_IRQHandler + .thumb_set I2C2_3_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_3_IRQHandler + .thumb_set SPI2_3_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_LPUART2_IRQHandler + .thumb_set USART2_LPUART2_IRQHandler,Default_Handler + + .weak USART3_4_5_6_LPUART1_IRQHandler + .thumb_set USART3_4_5_6_LPUART1_IRQHandler,Default_Handler + + .weak CEC_IRQHandler + .thumb_set CEC_IRQHandler,Default_Handler