303 lines
11 KiB
C
303 lines
11 KiB
C
|
/**
|
||
|
|
******************************************************************************
|
||
|
|
* @file system_stm32g0xx.c
|
||
|
|
* @author MCD Application Team
|
||
|
|
* @brief CMSIS Cortex-M0+ Device Peripheral Access Layer System Source File
|
||
|
|
*
|
||
|
|
* This file provides two functions and one global variable to be called from
|
||
|
|
* user application:
|
||
|
|
* - SystemInit(): This function is called at startup just after reset and
|
||
|
|
* before branch to main program. This call is made inside
|
||
|
|
* the "startup_stm32g0xx.s" file.
|
||
|
|
*
|
||
|
|
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
||
|
|
* by the user application to setup the SysTick
|
||
|
|
* timer or configure other parameters.
|
||
|
|
*
|
||
|
|
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
||
|
|
* be called whenever the core clock is changed
|
||
|
|
* during program execution.
|
||
|
|
*
|
||
|
|
* After each device reset the HSI (8 MHz then 16 MHz) is used as system clock source.
|
||
|
|
* Then SystemInit() function is called, in "startup_stm32g0xx.s" file, to
|
||
|
|
* configure the system clock before to branch to main program.
|
||
|
|
*
|
||
|
|
* This file configures the system clock as follows:
|
||
|
|
*=============================================================================
|
||
|
|
*-----------------------------------------------------------------------------
|
||
|
|
* System Clock source | HSI
|
||
|
|
*-----------------------------------------------------------------------------
|
||
|
|
* SYSCLK(Hz) | 16000000
|
||
|
|
*-----------------------------------------------------------------------------
|
||
|
|
* HCLK(Hz) | 16000000
|
||
|
|
*-----------------------------------------------------------------------------
|
||
|
|
* AHB Prescaler | 1
|
||
|
|
*-----------------------------------------------------------------------------
|
||
|
|
* APB Prescaler | 1
|
||
|
|
*-----------------------------------------------------------------------------
|
||
|
|
* HSI Division factor | 1
|
||
|
|
*-----------------------------------------------------------------------------
|
||
|
|
* PLL_M | 1
|
||
|
|
*-----------------------------------------------------------------------------
|
||
|
|
* PLL_N | 8
|
||
|
|
*-----------------------------------------------------------------------------
|
||
|
|
* PLL_P | 7
|
||
|
|
*-----------------------------------------------------------------------------
|
||
|
|
* PLL_Q | 2
|
||
|
|
*-----------------------------------------------------------------------------
|
||
|
|
* PLL_R | 2
|
||
|
|
*-----------------------------------------------------------------------------
|
||
|
|
* Require 48MHz for RNG | Disabled
|
||
|
|
*-----------------------------------------------------------------------------
|
||
|
|
*=============================================================================
|
||
|
|
******************************************************************************
|
||
|
|
* @attention
|
||
|
|
*
|
||
|
|
* Copyright (c) 2018-2021 STMicroelectronics.
|
||
|
|
* All rights reserved.
|
||
|
|
*
|
||
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
||
|
|
* in the root directory of this software component.
|
||
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||
|
|
*
|
||
|
|
******************************************************************************
|
||
|
|
*/
|
||
|
|
/** @addtogroup CMSIS
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup stm32g0xx_system
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup STM32G0xx_System_Private_Includes
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "stm32g0xx.h"
|
||
|
|
|
||
|
|
#if !defined (HSE_VALUE)
|
||
|
|
#define HSE_VALUE (8000000UL) /*!< Value of the External oscillator in Hz */
|
||
|
|
#endif /* HSE_VALUE */
|
||
|
|
|
||
|
|
#if !defined (HSI_VALUE)
|
||
|
|
#define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/
|
||
|
|
#endif /* HSI_VALUE */
|
||
|
|
|
||
|
|
#if !defined (LSI_VALUE)
|
||
|
|
#define LSI_VALUE (32000UL) /*!< Value of LSI in Hz*/
|
||
|
|
#endif /* LSI_VALUE */
|
||
|
|
|
||
|
|
#if !defined (LSE_VALUE)
|
||
|
|
#define LSE_VALUE (32768UL) /*!< Value of LSE in Hz*/
|
||
|
|
#endif /* LSE_VALUE */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup STM32G0xx_System_Private_TypesDefinitions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup STM32G0xx_System_Private_Defines
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/************************* Miscellaneous Configuration ************************/
|
||
|
|
/* Note: Following vector table addresses must be defined in line with linker
|
||
|
|
configuration. */
|
||
|
|
/*!< Uncomment the following line if you need to relocate the vector table
|
||
|
|
anywhere in Flash or Sram, else the vector table is kept at the automatic
|
||
|
|
remap of boot address selected */
|
||
|
|
/* #define USER_VECT_TAB_ADDRESS */
|
||
|
|
|
||
|
|
#if defined(USER_VECT_TAB_ADDRESS)
|
||
|
|
/*!< Uncomment the following line if you need to relocate your vector Table
|
||
|
|
in Sram else user remap will be done in Flash. */
|
||
|
|
/* #define VECT_TAB_SRAM */
|
||
|
|
#if defined(VECT_TAB_SRAM)
|
||
|
|
#define VECT_TAB_BASE_ADDRESS SRAM_BASE /*!< Vector Table base address field.
|
||
|
|
This value must be a multiple of 0x200. */
|
||
|
|
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
|
||
|
|
This value must be a multiple of 0x200. */
|
||
|
|
#else
|
||
|
|
#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field.
|
||
|
|
This value must be a multiple of 0x200. */
|
||
|
|
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
|
||
|
|
This value must be a multiple of 0x200. */
|
||
|
|
#endif /* VECT_TAB_SRAM */
|
||
|
|
#endif /* USER_VECT_TAB_ADDRESS */
|
||
|
|
/******************************************************************************/
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup STM32G0xx_System_Private_Macros
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup STM32G0xx_System_Private_Variables
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/* The SystemCoreClock variable is updated in three ways:
|
||
|
|
1) by calling CMSIS function SystemCoreClockUpdate()
|
||
|
|
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
||
|
|
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||
|
|
Note: If you use this function to configure the system clock; then there
|
||
|
|
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||
|
|
variable is updated automatically.
|
||
|
|
*/
|
||
|
|
uint32_t SystemCoreClock = 16000000UL;
|
||
|
|
|
||
|
|
const uint32_t AHBPrescTable[16UL] = {0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 1UL, 2UL, 3UL, 4UL, 6UL, 7UL, 8UL, 9UL};
|
||
|
|
const uint32_t APBPrescTable[8UL] = {0UL, 0UL, 0UL, 0UL, 1UL, 2UL, 3UL, 4UL};
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup STM32G0xx_System_Private_FunctionPrototypes
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup STM32G0xx_System_Private_Functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Setup the microcontroller system.
|
||
|
|
* @param None
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void SystemInit(void)
|
||
|
|
{
|
||
|
|
/* Configure the Vector Table location -------------------------------------*/
|
||
|
|
#if defined(USER_VECT_TAB_ADDRESS)
|
||
|
|
SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation */
|
||
|
|
#endif /* USER_VECT_TAB_ADDRESS */
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
||
|
|
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
||
|
|
* be used by the user application to setup the SysTick timer or configure
|
||
|
|
* other parameters.
|
||
|
|
*
|
||
|
|
* @note Each time the core clock (HCLK) changes, this function must be called
|
||
|
|
* to update SystemCoreClock variable value. Otherwise, any configuration
|
||
|
|
* based on this variable will be incorrect.
|
||
|
|
*
|
||
|
|
* @note - The system frequency computed by this function is not the real
|
||
|
|
* frequency in the chip. It is calculated based on the predefined
|
||
|
|
* constant and the selected clock source:
|
||
|
|
*
|
||
|
|
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**) / HSI division factor
|
||
|
|
*
|
||
|
|
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
|
||
|
|
*
|
||
|
|
* - If SYSCLK source is LSI, SystemCoreClock will contain the LSI_VALUE
|
||
|
|
*
|
||
|
|
* - If SYSCLK source is LSE, SystemCoreClock will contain the LSE_VALUE
|
||
|
|
*
|
||
|
|
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***)
|
||
|
|
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
|
||
|
|
*
|
||
|
|
* (**) HSI_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value
|
||
|
|
* 16 MHz) but the real value may vary depending on the variations
|
||
|
|
* in voltage and temperature.
|
||
|
|
*
|
||
|
|
* (***) HSE_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value
|
||
|
|
* 8 MHz), user has to ensure that HSE_VALUE is same as the real
|
||
|
|
* frequency of the crystal used. Otherwise, this function may
|
||
|
|
* have wrong result.
|
||
|
|
*
|
||
|
|
* - The result of this function could be not correct when using fractional
|
||
|
|
* value for HSE crystal.
|
||
|
|
*
|
||
|
|
* @param None
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void SystemCoreClockUpdate(void)
|
||
|
|
{
|
||
|
|
uint32_t tmp;
|
||
|
|
uint32_t pllvco;
|
||
|
|
uint32_t pllr;
|
||
|
|
uint32_t pllsource;
|
||
|
|
uint32_t pllm;
|
||
|
|
uint32_t hsidiv;
|
||
|
|
|
||
|
|
/* Get SYSCLK source -------------------------------------------------------*/
|
||
|
|
switch (RCC->CFGR & RCC_CFGR_SWS)
|
||
|
|
{
|
||
|
|
case RCC_CFGR_SWS_0: /* HSE used as system clock */
|
||
|
|
SystemCoreClock = HSE_VALUE;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (RCC_CFGR_SWS_1 | RCC_CFGR_SWS_0): /* LSI used as system clock */
|
||
|
|
SystemCoreClock = LSI_VALUE;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case RCC_CFGR_SWS_2: /* LSE used as system clock */
|
||
|
|
SystemCoreClock = LSE_VALUE;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case RCC_CFGR_SWS_1: /* PLL used as system clock */
|
||
|
|
/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
|
||
|
|
SYSCLK = PLL_VCO / PLLR
|
||
|
|
*/
|
||
|
|
pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
|
||
|
|
pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1UL;
|
||
|
|
|
||
|
|
if(pllsource == 0x03UL) /* HSE used as PLL clock source */
|
||
|
|
{
|
||
|
|
pllvco = (HSE_VALUE / pllm);
|
||
|
|
}
|
||
|
|
else /* HSI used as PLL clock source */
|
||
|
|
{
|
||
|
|
pllvco = (HSI_VALUE / pllm);
|
||
|
|
}
|
||
|
|
pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos);
|
||
|
|
pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1UL);
|
||
|
|
|
||
|
|
SystemCoreClock = pllvco/pllr;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case 0x00000000U: /* HSI used as system clock */
|
||
|
|
default: /* HSI used as system clock */
|
||
|
|
hsidiv = (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV))>> RCC_CR_HSIDIV_Pos));
|
||
|
|
SystemCoreClock = (HSI_VALUE/hsidiv);
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
/* Compute HCLK clock frequency --------------------------------------------*/
|
||
|
|
/* Get HCLK prescaler */
|
||
|
|
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos)];
|
||
|
|
/* HCLK clock frequency */
|
||
|
|
SystemCoreClock >>= tmp;
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|